# Generated automatically from Makefile.in by configure.
# This is the Makefile for Taylor UUCP
#
# The file Makefile.in should be processed by configure to generate
# Makefile.  If you want to generate Makefile by hand, you must find
# all variables surrounded by @ and replace them with the correct
# value (e.g. gcc must be replaced by something like cc or gcc).
#
# Once you have done that, you should check the definitions at the top
# of this file to make sure that they are reasonable for your system.

# Prefix directory for installation directories.
prefix = /usr
#prefix = /usr

# Prefix directory for files that are specific to a host type.
exec_prefix = ${prefix}

# The user name that should own the resulting executables, several of
# which are suid.  If you change this, you must run `make clean'.
owner = uucp

# Where to install uucico, uuxqt, uuchk and uuconv.  If you use this
# definition, $(exec_prefix)/lib must exist.
sbindir = $(exec_prefix)/lib/uucp
#sbindir = $(exec_prefix)/libexec/uucp

# Where to install uucp, uux, uustat, uuname, uulog, uuto, uupick and
# cu.
bindir = $(exec_prefix)/bin

# Where to install man pages.  Section 1 for user programs, 8 for daemons.
man1dir = $(prefix)/man/man1
#man1dir = $(prefix)/share/man/man1
man1ext = .1
man8dir = $(prefix)/man/man8
#man8dir = $(prefix)/share/man/man8
man8ext = .8

# Where to install the info files.
infodir = $(prefix)/info
#infodir = $(prefix)/share/info

# The directory to look in for new style configuration files (when
# using HAVE_TAYLOR_CONFIG).  Note that by default this is different
# from sbindir, unlike traditional UUCP packages.
newconfigdir = $(prefix)/conf/uucp
#newconfigdir = /etc/uucp

# The directory to look in for HDB (when using HAVE_HDB_CONFIG) or
# V2 (when using HAVE_V2_CONFIG) style configuration files.
oldconfigdir = /usr/lib/uucp

# If you don't want to compile tstuu, which requires BSD style ptys
# and the Taylor configuration files, comment out the following line
# The tstuu program is only used to test the package; it is described
# further in the documentation.
TSTUU = tstuu

#
# The next few lines are set up by the configuration script.  You may
# want to look them over.
#

# If you do not have the mkdir system call, uncomment the following
# three lines.  This will install uudir as an suid root program.  This
# is necessary because invoking /bin/mkdir from an suid program will
# leave the directories owned by the wrong user.
# UUDIR = uudir
# uudirdir = $(sbindir)/util
# UUDIRFLAGS = -DUUDIR_PROGRAM=\"$(uudirdir)/$(UUDIR)\"

# Set to no if the system does not support #! at the beginning of
# scripts.
POUNDBANG = yes

# Source directory and, if necessary, VPATH
srcdir = .

# Define programs and flags
CC = gcc
CPPFLAGS = 
CFLAGS = -g -O
LDFLAGS = 
LIBS = 

INSTALL = /usr/bin/ginstall -c
INSTALL_PROGRAM = ${INSTALL}
INSTALL_DATA = ${INSTALL} -m 644

AR = ar
RANLIB = ranlib

LN_S = ln -s

MAKEINFO = makeinfo
TEXI2DVI = texi2dvi
DVITPS = dvips
TEXI2HTML = texi2html



#
# Nothing else to configure
#

SHELL = /bin/sh

VERSION = 1.06.1

MORECFLAGS = -I. -I$(srcdir) -DOWNER=\"$(owner)\" -DVERSION=\"$(VERSION)\" $(UUDIRFLAGS)

MDEFINES = CC='$(CC)' CPPFLAGS='$(CPPFLAGS)' CFLAGS='$(CFLAGS)' AR='$(AR)' RANLIB='$(RANLIB)' LN_S='$(LN_S)' newconfigdir='$(newconfigdir)' oldconfigdir='$(oldconfigdir)' owner='$(owner)' sbindir='$(sbindir)' UUDIRFLAGS='$(UUDIRFLAGS)' VERSION='$(VERSION)'

PROGRAMS = uucico uuxqt uux uucp uuchk uuconv uustat uuname uusched \
	uulog uuto uupick cu

UUOBJS = uucico.o trans.o send.o rec.o xcmd.o prot.o protg.o protf.o \
	prott.o prote.o proti.o protj.o proty.o protz.o time.o log.o \
	chat.o conn.o util.o copy.o
XQTOBJS = uuxqt.o util.o log.o copy.o
UUXOBJS = uux.o util.o log.o copy.o
UUCPOBJS = uucp.o util.o log.o copy.o
UUSTATOBJS = uustat.o util.o log.o copy.o
UUNAMEOBJS = uuname.o log.o
UULOGOBJS = uulog.o log.o
UUPICKOBJS = uupick.o log.o copy.o
CUOBJS = cu.o prot.o log.o chat.o conn.o copy.o
UUCHKOBJS = uuchk.o
UUCONVOBJS = uuconv.o
TSTOBJS = tstuu.o

ALLOBJS = uucico.o uuxqt.o uux.o uucp.o uuchk.o uuconv.o uustat.o \
	uuname.o uulog.o uupick.o cu.o uudir.o tstuu.o trans.o send.o \
	rec.o xcmd.o prot.o protg.o protf.o prott.o prote.o proti.o \
	protj.o proty.o protz.o util.o time.o log.o chat.o conn.o \
	copy.o

UULIBS = unix/libunix.a uuconf/libuuconf.a lib/libuucp.a

all: $(PROGRAMS) $(TSTUU) $(UUDIR)

install: $(PROGRAMS) $(UUDIR)
	if test -d $(sbindir); then true; else mkdir $(sbindir); fi
	if test -d $(bindir); then true; else mkdir $(bindir); fi
	-if test -f $(sbindir)/uucico.old; then rm -f $(sbindir)/uucico; else mv $(sbindir)/uucico $(sbindir)/uucico.old; fi
	-if test -f $(sbindir)/uuxqt.old; then rm -f $(sbindir)/uuxqt; else mv $(sbindir)/uuxqt $(sbindir)/uuxqt.old; fi
	-if test -f $(sbindir)/uusched.old; then rm -f $(sbindir)/uusched; else mv $(sbindir)/uusched $(sbindir)/uusched.old; fi
	$(INSTALL_PROGRAM) uucico $(sbindir)/uucico
	$(INSTALL_PROGRAM) uuxqt $(sbindir)/uuxqt
	$(INSTALL_PROGRAM) uuchk $(sbindir)/uuchk
	$(INSTALL_PROGRAM) uuconv $(sbindir)/uuconv
	$(INSTALL_PROGRAM) uusched $(sbindir)/uusched
	chown $(owner) $(sbindir)/uucico $(sbindir)/uuxqt
	chmod 4555 $(sbindir)/uucico $(sbindir)/uuxqt
	chown $(owner) $(sbindir)/uuchk $(sbindir)/uuconv
	if test "$(UUDIR)X" != "X"; then \
	  if test -d $(uudirdir); then \
	    true \
	  else \
	    mkdir $(uudirdir); \
	  fi; \
	  chown $(owner) $(uudirdir); \
	  chmod 100 $(uudirdir); \
	  $(INSTALL_PROGRAM) uudir $(uudirdir)/uudir; \
	  chown root $(uudirdir)/uudir; \
	  chmod 4555 $(uudirdir)/uudir; \
	else \
	  true; \
	fi
	-for i in uux uucp uustat uuname uulog uuto uupick cu; do \
	  if test -f $(bindir)/$$i.old; then \
	    rm -f $(bindir)/$$i; \
	  else \
	    mv $(bindir)/$$i $(bindir)/$$i.old; \
	  fi; \
	  $(INSTALL_PROGRAM) $$i $(bindir)/$$i; \
	done
	chown $(owner) $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
	chown $(owner) $(bindir)/uuname $(bindir)/cu
	chmod 4555 $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
	chmod 4555 $(bindir)/uuname $(bindir)/cu
	if test -d $(man1dir); then true; else mkdir $(man1dir); fi
	if test -d $(man8dir); then true; else mkdir $(man8dir); fi
	$(INSTALL_DATA) $(srcdir)/uucico.8 $(man8dir)/uucico$(man8ext)
	$(INSTALL_DATA) $(srcdir)/uuxqt.8 $(man8dir)/uuxqt$(man8ext)
	$(INSTALL_DATA) $(srcdir)/uux.1 $(man1dir)/uux$(man1ext)
	$(INSTALL_DATA) $(srcdir)/uucp.1 $(man1dir)/uucp$(man1ext)
	$(INSTALL_DATA) $(srcdir)/uustat.1 $(man1dir)/uustat$(man1ext)
	$(INSTALL_DATA) $(srcdir)/cu.1 $(man1dir)/cu$(man1ext)
	@echo Use \"make install-info\" to install the info pages.

uninstall:
	rm -f $(sbindir)/uucico $(sbindir)/uuxqt $(sbindir)/uusched
	-cp $(sbindir)/uucico.old $(sbindir)/uucico
	-cp $(sbindir)/uuxqt.old $(sbindir)/uuxqt
	-cp $(sbindir)/uusched.old $(sbindir)/uusched
	-chown $(owner) $(sbindir)/uucico $(sbindir)/uuxqt
	-chmod 4555 $(sbindir)/uucico $(sbindir)/uuxqt
	-chown $(owner) $(sbindir)/uuchk $(sbindir)/uuconv
	rm -f $(bindir)/uux $(bindir)/uucp $(bindir)/uustat
	rm -f $(bindir)/uuname $(bindir)/uulog $(bindir)/uuto
	rm -f $(bindir)/uupick $(bindir)/cu
	-cp $(bindir)/uux.old $(bindir)/uux
	-cp $(bindir)/uucp.old $(bindir)/uucp
	-cp $(bindir)/uustat.old $(bindir)/uustat
	-cp $(bindir)/uuname.old $(bindir)/uuname
	-cp $(bindir)/uulog.old $(bindir)/uulog
	-cp $(bindir)/uuto.old $(bindir)/uuto
	-cp $(bindir)/uupick.old $(bindir)/uupick
	-cp $(bindir)/cu.old $(bindir)/cu
	-chown $(owner) $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
	-chown $(owner) $(bindir)/uuname $(bindir)/cu
	-chmod 4555 $(bindir)/uux $(bindir)/uucp $(bindir)/uustat 
	-chmod 4555 $(bindir)/uuname $(bindir)/cu

uucico: $(UUOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uucico $(UUOBJS) $(UULIBS) $(LIBS)

uuxqt: $(XQTOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uuxqt $(XQTOBJS) $(UULIBS) $(LIBS)

uux: $(UUXOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uux $(UUXOBJS) $(UULIBS) $(LIBS)

uucp: $(UUCPOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uucp $(UUCPOBJS) $(UULIBS) $(LIBS)

uustat: $(UUSTATOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uustat $(UUSTATOBJS) $(UULIBS) $(LIBS)

uuname: $(UUNAMEOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uuname $(UUNAMEOBJS) $(UULIBS) $(LIBS)

uulog: $(UULOGOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uulog $(UULOGOBJS) $(UULIBS) $(LIBS)

uusched: uusched.in Makefile
	-rm -f uusched
	if [ "x$(POUNDBANG)" = "xno" ]; then \
	  sed -e 's,#!/bin/sh,:,' -e 's,@SBINDIR@,$(sbindir),' < $(srcdir)/uusched.in > uusched; \
	else \
	  sed -e 's,@SBINDIR@,$(sbindir),' < $(srcdir)/uusched.in > uusched; \
	fi
	chmod 0555 uusched

uuto: uuto.in Makefile
	-rm -f uuto
	if [ "x$(POUNDBANG)" = "xno" ]; then \
	  sed -e 's,#!/bin/sh,:,' -e 's,@BINDIR@,$(bindir),' < $(srcdir)/uuto.in > uuto; \
	else \
	  sed -e 's,@BINDIR@,$(bindir),' < $(srcdir)/uuto.in > uuto; \
	fi
	chmod 0555 uuto

uupick: $(UUPICKOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uupick $(UUPICKOBJS) $(UULIBS) $(LIBS)

cu: $(CUOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o cu $(CUOBJS) $(UULIBS) $(LIBS)

uuchk: $(UUCHKOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uuchk $(UUCHKOBJS) $(UULIBS) $(LIBS)

uuconv: $(UUCONVOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uuconv $(UUCONVOBJS) $(UULIBS) $(LIBS)

tstuu: $(TSTOBJS) $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o tstuu $(TSTOBJS) $(UULIBS) $(LIBS)

uudir: uudir.o $(UULIBS)
	$(CC) $(CFLAGS) $(LDFLAGS) -o uudir uudir.o $(UULIBS) $(LIBS)

.c.o:
	$(CC) -c $(MORECFLAGS) $(CPPFLAGS) $(CFLAGS) $<

uuconv.o: uuconv.c
	$(CC) -c $(MORECFLAGS) -I$(srcdir)/uuconf -Iuuconf $(CPPFLAGS) $(CFLAGS) $(srcdir)/uuconv.c

sysdep.h: sysh.unx
	rm -f sysdep.h
	$(LN_S) $(srcdir)/sysh.unx sysdep.h || cp $(srcdir)/sysh.unx sysdep.h

uuconf/libuuconf.a: FORCE config.h
	(cd uuconf; $(MAKE) $(MDEFINES) libuuconf.a)

unix/libunix.a: FORCE config.h sysdep.h
	(cd unix; $(MAKE) $(MDEFINES) libunix.a)

lib/libuucp.a: FORCE config.h
	(cd lib; $(MAKE) $(MDEFINES) libuucp.a)

FORCE:
	@: Dummy command needed to work around QNX make bug.

clean:
	(cd unix; $(MAKE) $(MDEFINES) clean)
	(cd uuconf; $(MAKE) $(MDEFINES) clean)
	(cd lib; $(MAKE) $(MDEFINES) clean)
	rm -f $(ALLOBJS) $(PROGRAMS) tstuu sysdep.h
	rm -f uucp-$(VERSION).tar.gz
	rm -rf uucp-$(VERSION)

distclean:
	(cd unix; $(MAKE) $(MDEFINES) distclean)
	(cd uuconf; $(MAKE) $(MDEFINES) distclean)
	(cd lib; $(MAKE) $(MDEFINES) distclean)
	rm -f $(ALLOBJS) $(PROGRAMS) tstuu sysdep.h
	rm -f uucp-$(VERSION).tar.gz
	rm -rf uucp-$(VERSION)
	rm -f Makefile config.h config.status stamp-h config.log config.cache

mostlyclean: clean

maintainer-clean realclean: distclean

# The distribution targets are mostly for my own use; they are not
# expected to work on all other systems.

dist:
	-rm -rf uucp-$(VERSION)
	-rm -f uucp-$(VERSION).tar uucp-$(VERSION).tar.gz
	mkdir uucp-$(VERSION)
	ln `cat $(srcdir)/MANIFEST | sed -e 's|^|$(srcdir)/|'` uucp-$(VERSION)
	rm -f uucp-$(VERSION)/policy.h uucp-$(VERSION)/Makefile.in
	cp $(srcdir)/policy.h $(srcdir)/Makefile.in uucp-$(VERSION)
	chmod 0644 uucp-$(VERSION)/policy.h uucp-$(VERSION)/Makefile.in
	mkdir uucp-$(VERSION)/contrib
	ln $(srcdir)/contrib/* uucp-$(VERSION)/contrib
	mkdir uucp-$(VERSION)/sample
	ln $(srcdir)/sample/* uucp-$(VERSION)/sample
	(cd unix; $(MAKE) $(MDEFINES) dist)
	(cd uuconf; $(MAKE) $(MDEFINES) dist)
	(cd lib; $(MAKE) $(MDEFINES) dist)
	tar -cvf uucp-$(VERSION).tar uucp-$(VERSION)
	gzip --best uucp-$(VERSION).tar

doc-dist: uucp.texi uucp.info uucp.dvi uucp.ps uucp.html
	-rm -rf uucp-doc-$(VERSION) uucp-doc-dist
	-rm -f uucp-doc-$(VERSION).tar uucp-doc-$(VERSION).tar.gz
	mkdir uucp-doc-$(VERSION)
	ln $(srcdir)/README-DOC uucp-doc-$(VERSION)
	ln $(srcdir)/uucp.texi uucp-doc-$(VERSION)
	for i in uucp.info*; do ln $$i uucp-doc-$(VERSION); done
	ln uucp.dvi uucp.ps uucp-doc-$(VERSION)
	for i in uucp*.html; do ln $$i uucp-doc-$(VERSION); done
	ln uucp.cp uucp.fn uucp.aux uucp-doc-$(VERSION)
	ln texinfo.tex uucp-doc-$(VERSION)
	mkdir uucp-doc-dist
	mv uucp-doc-$(VERSION) uucp-doc-dist/uucp-$(VERSION)
	cd uucp-doc-dist; tar -cvf ../uucp-doc-$(VERSION).tar uucp-$(VERSION)
	gzip --best uucp-doc-$(VERSION).tar
	-rm -rf uucp-doc-dist

info: uucp.info

uucp.info: uucp.texi
	$(MAKEINFO) -o uucp.info $(srcdir)/uucp.texi

install-info: uucp.info
	if test -d $(infodir); then true; else mkdir $(infodir); fi
	if test -r uucp.info; then \
	  dir=.; \
	else \
	  dir=$(srcdir); \
	fi; \
	for i in `cd $$dir; echo uucp.info*`; do \
	  $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i; \
	done

dvi: uucp.dvi

uucp.dvi: uucp.texi
	$(TEXI2DVI) $(srcdir)/uucp.texi

ps: uucp.ps

uucp.ps: uucp.dvi
	$(DVITPS) -o uucp.ps uucp.dvi

html: uucp.html

uucp.html: uucp.texi
	$(TEXI2HTML) -menu -split_chapter $(srcdir)/uucp.texi

# Suggested autoconf targets.

${srcdir}/configure: configure.in
	cd ${srcdir} && autoconf

config.h: stamp-h
stamp-h: config.h.in config.status
	CONFIG_FILES= CONFIG_HEADERS=config.h $(SHELL) ./config.status

Makefile: Makefile.in config.status
	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status

config.status: configure
	$(SHELL) ./config.status --recheck

TAGS:
	etags *.h *.c

# Header file dependencies.  These are maintained by hand.

$(ALLOBJS): uucp.h config.h policy.h

uucico.o: uudefs.h uuconf.h system.h prot.h conn.h trans.h getopt.h
uuxqt.o: uudefs.h uuconf.h system.h getopt.h
uux.o: uudefs.h uuconf.h system.h getopt.h sysdep.h
uucp.o: uudefs.h uuconf.h system.h getopt.h
uustat.o: uudefs.h uuconf.h system.h getopt.h
uuname.o: uudefs.h uuconf.h system.h getopt.h
uulog.o: uudefs.h uuconf.h system.h getopt.h
uupick.o: uudefs.h uuconf.h system.h getopt.h
cu.o: cu.h uudefs.h uuconf.h sysdep.h conn.h prot.h system.h getopt.h
uuchk.o: uuconf.h getopt.h
uuconv.o: $(srcdir)/uuconf/uucnfi.h uuconf.h getopt.h
uudir.o: sysdep.h
tstuu.o: sysdep.h getopt.h system.h
trans.o: uudefs.h uuconf.h system.h prot.h trans.h
send.o: uudefs.h uuconf.h system.h prot.h trans.h
rec.o: uudefs.h uuconf.h system.h prot.h trans.h
xcmd.o: uudefs.h uuconf.h system.h prot.h trans.h
prot.o: uudefs.h uuconf.h system.h prot.h conn.h
protg.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
protf.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
prott.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
prote.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
proti.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
protj.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
proty.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
protz.o: uudefs.h uuconf.h prot.h conn.h system.h trans.h
log.o: uudefs.h uuconf.h system.h
chat.o: uudefs.h uuconf.h system.h prot.h conn.h
conn.o: uudefs.h uuconf.h conn.h
time.o: uudefs.h uuconf.h
util.o: uudefs.h uuconf.h system.h
copy.o: uudefs.h system.h sysdep.h

.NOEXPORT:

.PHONY: all install uninstall clean distclean mostlyclean realclean
.PHONY: maintainer-clean dist doc-dist info info install-info dvi ps

.