---
title: "Inset maps with insetplot"
output: rmarkdown::html_vignette
vignette: >
  %\VignetteIndexEntry{Inset maps with insetplot}
  %\VignetteEngine{knitr::rmarkdown}
  %\VignetteEncoding{UTF-8}
---

```{r setup, include=FALSE}
knitr::opts_chunk$set(collapse = TRUE, comment = "#>", fig.align = "center")
library(ggplot2)
library(sf)
library(insetplot)
library(patchwork)
# Shared data available to all chunks
nc <- st_read(system.file("shape/nc.shp", package = "sf"), quiet = TRUE)
```

This vignette shows how to compose ggplot2 maps with insets using insetplot, with emphasis on runnable code.

## Quick start

```{r quick-start, out.width="100%",fig.asp=0.4,dpi=300, fig.alt="North Carolina map with an inset showing a zoomed detail region at the bottom-left corner."}
# 1) Configure the layout: one main map + one inset (nc loaded in setup)
config_insetmap(
    data_list = list(nc),
    specs = list(
        inset_spec(main = TRUE),
        inset_spec(
            xmin = -82, xmax = -80.5, ymin = 35.5, ymax = 36, # bbox for the inset area
            loc = "left bottom", # where to place the inset
            scale_factor = 2 # size relative to main
        )
    )
)

# 2) Build a base plot (shared by main and inset unless a spec supplies its own)
base <- ggplot(nc, aes(fill = AREA)) +
    geom_sf() +
    scale_fill_viridis_c() +
    guides(fill = "none") +
    theme_void()

# 3) Compose
with_inset(base)

# 4) Save with correct aspect ratio (only width or height is needed)
# ggsave_inset("inset_map.png", width = 10)
```

You can also provide custom plots per spec, then call `with_inset()` without a `plot` argument.

For example, you may want to add some annotations to the inset(s) only.

```{r quick-start-custom, out.width="100%",fig.asp=0.4,dpi=300, fig.alt="North Carolina map with an inset showing a zoomed detail region labeled 'Detail' at the bottom-left corner."}
main <- ggplot(nc, aes(fill = AREA)) +
    geom_sf() +
    scale_fill_viridis_c() +
    guides(fill = "none") +
    theme_void()

config_insetmap(
    data_list = list(nc),
    specs = list(
        inset_spec(main = TRUE, plot = main),
        inset_spec(
            xmin = -82, xmax = -80.5, ymin = 35.5, ymax = 36,
            loc = "left bottom", # where to place the inset
            scale_factor = 2, # size relative to main
            plot = main +
                annotate("label", x = -80.5, y = 35.5, label = "Detail", size = 5, hjust = 1, vjust = 0, fill = "white", size.unit = "pt")
        )
    )
)
with_inset()
```


## Why insetplot (vs. using cowplot/patchwork directly)

But why not just use `patchwork::inset_element()` or `cowplot::draw_plot()` directly? I'll demonstrate this by the following minimal example.

First, without `insetplot`, we should manually create the inset plot by zooming into the desired bbox like this (I add borders to plots for clarity):

```{r realmap-setup}
inset_bbox <- c(xmin = -82, xmax = -80.5, ymin = 35.5, ymax = 36)
main_map <- ggplot(nc, aes(fill = AREA)) +
    geom_sf() +
    scale_fill_viridis_c() +
    guides(fill = "none") +
    theme_void() +
    map_border(linewidth = 0.5)
inset_map <- main_map +
    coord_sf(
        xlim = c(inset_bbox["xmin"], inset_bbox["xmax"]),
        ylim = c(inset_bbox["ymin"], inset_bbox["ymax"])
    )
```

Suppose we want to add the inset at the bottom-left corner with height 30% of the main plot.

Now, let's try `patchwork::inset_element()`. Since, here, we don't know the correct aspect ratio, we might specify arbitrary width/height for the inset.

```{r compare-patchwork-real, fig.cap='Inset via patchwork', out.width="100%",fig.asp=0.4,dpi=300, fig.alt="North Carolina map with an inset positioned at bottom-left using patchwork, showing some visual distortion due to mismatched aspect ratio."}
# Manual insetting with patchwork: force a mismatched container ratio
main_map + patchwork::inset_element(
    inset_map,
    left = 0, bottom = 0, right = 0.3, top = 0.3, # arbitrary width/height
    align_to = "panel"
)
```

And now `cowplot::draw_plot()`:

```{r compare-cowplot-real, fig.cap='Inset via cowplot', out.width="100%",fig.asp=0.4,dpi=300, fig.alt="North Carolina map with an inset positioned at bottom-left using cowplot with 30% width and height, showing some distortion."}
cowplot::ggdraw(main_map) +
    cowplot::draw_plot(inset_map, 0, 0, 0.3, 0.3) # arbitrary width/height
```

Thing will become much worse when you save the plots with different output apsect ratios. For example, if I save the above plot with a height-to-width artio of 1.0:

```{r compare-cowplot-real-asp, fig.cap='Inset via cowplot with wrong aspect ratio', out.width="100%",fig.asp=1.0,dpi=300, fig.alt="North Carolina map with an inset using cowplot with square aspect ratio (1:1), showing significant distortion due to incompatible aspect ratio."}
cowplot::ggdraw(main_map) +
    cowplot::draw_plot(inset_map, 0, 0, 0.3, 0.3) # arbitrary width/height
```

You may get better results by adjusting the inset size manually based on visual inspection of the output plot.

Now let's see how `insetplot` handles this more gracefully.

```{r compare-insetplot-real, fig.cap='Inset via insetplot', out.width="100%",fig.asp=0.4,dpi=300, fig.alt="North Carolina map with an inset positioned at bottom-left using insetplot, showing correct aspect ratio preservation without distortion."}
config_insetmap(
    data_list = list(nc),
    specs = list(
        inset_spec(main = TRUE),
        inset_spec(
            xmin = -82, xmax = -80.5, ymin = 35.5, ymax = 36,
            loc = "left bottom", height = 0.3
        )
    )
)

# You even don't need to prepare `inset_map` here since insetplot handles it internally
with_inset(main_map)
```

Even you save this plot with a not-that-good aspect ratio, such as 1.0:

```{r compare-insetplot-real-asp, fig.cap='Inset via insetplot with wrong aspect ratio', out.width="100%",fig.asp=1.0,dpi=300, fig.alt="North Carolina map with an inset using insetplot with square aspect ratio (1:1), demonstrating that insetplot still maintains correct spatial aspect despite the output canvas ratio mismatch."}
with_inset(main_map)
```

And don't forget that, in fact, you can always save it correctly with `ggsave_inset()`.

In short: insetplot calculates inset sizes from data aspect ratios (via bounding boxes) and guides saving via `ggsave_inset()`, so you avoid accidental stretching.

## What each parameter means

Below are the key functions and their arguments, illustrated inline.

### Define subplots (inset_spec)

```{r params-inset-spec, results='hide', message=FALSE, warning=FALSE}
# Define a main spec (no size/position needed)
inset_spec(main = TRUE)

# Define an inset by bbox + position + size
inset_spec(
    xmin = -120, xmax = -100, ymin = 30, ymax = 50, # spatial extent (data CRS)
    loc = "right bottom", # shorthand position on full canvas
    width = 0.30 # size in [0,1]; prefer ONE of width/height
)

# Prefer scale_factor to size relative to main plot automatically
inset_spec(
    xmin = -120, xmax = -100, ymin = 30, ymax = 50,
    loc = "left bottom",
    scale_factor = 0.5 # relative to main ranges
)
```

`inset_spec()` arguments:

- `xmin`, `xmax`, `ymin`, `ymax`: numeric bbox of the subplot in data coordinates. Any `NA` is filled from overall extent.
- `loc`: convenience string "left|center|right bottom|center|top". Ignored if `loc_left`/`loc_bottom` given.
- `loc_left`, `loc_bottom`: numbers in [0,1] for precise bottom-left position on the canvas.
- `width`, `height`: numbers in (0,1]. Recommend providing only one; the other is inferred to preserve spatial aspect.
- `scale_factor`: number in (0,Inf) to size inset relative to main plot's x/y ranges. Overrides `width`/`height` when set.
- `main`: TRUE if this spec is the main plot (exactly one spec must be main).
- `plot`: optional ggplot for this spec; otherwise the shared base plot is used.

### Configure layout (config_insetmap)

```{r params-config-insetmap, results='hide', message=FALSE, warning=FALSE}
cfg <- config_insetmap(
    data_list = list(nc), # list of sf objects used to compute extents/CRS
    specs = list(
        inset_spec(main = TRUE),
        inset_spec(xmin = -84, xmax = -75, ymin = 33, ymax = 37, loc = "left bottom", scale_factor = 0.5)
    ),
    crs = sf::st_crs("EPSG:4326"), # target CRS for coord_sf()
    border_args = list(color = "black", linewidth = 1) # passed to map_border()
)
```

`config_insetmap()` arguments:

- `data_list`: list of sf objects; used to compute union bbox and main aspect ratio.
- `specs`: list of `inset_spec` objects; exactly one must have `main = TRUE`.
- `crs`: target CRS passed to `ggplot2::coord_sf()`.
- `border_args`: style for inset borders via `map_border()`.

### Compose the figure (with_inset)

```{r params-with-inset}
out <- with_inset(base) # returns the composed plot
names(with_inset(base, .return_details = TRUE)) # list with full, subplots, layouts, main_ratio

# You can also provide custom plots after configuring
out <- with_inset(list(main_map, inset_map))
```

`with_inset()` arguments:

- `plot`: a single ggplot used for all specs, or a list of ggplots per spec, or `NULL` if every spec has its own plot.
- `.cfg`: the configuration to use (defaults to `last_insetcfg()`).
- `.as_is`: return the input plot unchanged (handy for debugging/reuse).
- `.return_details`: return internals (layouts, subplots) instead of just the composed ggplot.

### Save with the right ratio (ggsave_inset)

```{r params-ggsave-inset, eval=FALSE}
# Provide only width (or only height). The other dimension is computed to match the main ratio.
# ggsave_inset("map.png", p, width = 10)
```

`ggsave_inset()` arguments:

- `width`/`height`: only one is needed; the other is calculated from the configuration's main ratio. If both are given, output may not match the intended ratio.
- `ratio_scale`: optional multiplier if extra space is needed for legends/titles.

.
