From: Digestifier To: Linux-Development@senator-bedfellow.mit.edu Reply-To: Linux-Development@senator-bedfellow.mit.edu Date: Mon, 17 Oct 94 09:13:13 EDT Subject: Linux-Development Digest #323 Linux-Development Digest #323, Volume #2 Mon, 17 Oct 94 09:13:13 EDT Contents: Outportb, Inportb under Linux ? (Kar Fai Choong) Re: Linux 1.1.52 (Lies, Damned Lies, and Benchmarks) (Erik Blass [SysAdmin]) Re: WP Project --Info and Volunteers WANTED!!! (J.J. Paijmans) Re: Linux Mud (Dominik Kubla) Re: [Answer?!] Re: ext2fs vs. Berkeley FFS (Brian Mounce) Re: We a FAQ: Linux vs. *BSD!!! (M.C Wong) [ANNOUNCE] Linux-SDK Project (Dominik Kubla) Re: ext2, UFS, Linux, and Mach (Chris Bitmead) Re: ext2fs vs. Berkeley FFS (Chris Bitmead) Re: Shared Libs: working toward a permanent solution? (H. Peter Anvin) Re: Looking for X graphics/ Plotting libraries (Alexandre Naaman) WP Project --Info and Volunteers WANTED!!! (Cory Zito) ---------------------------------------------------------------------------- From: kfchoong@undergrad.math.uwaterloo.ca (Kar Fai Choong) Subject: Outportb, Inportb under Linux ? Date: Fri, 14 Oct 1994 20:37:11 GMT Hi, I am writing a program under Linux that will requires me to write. read from the printer (parallel) port directly. I have done it under Dos with the command "outportb","inportb" in C. (All I am trying to do is to read/write the IO space at 378h.) Are there any commands under Linux which will do the same job ? Also, what libraries are there that contains functions that control the screen. For example, clear screen, changing cursor positions.. Thanks for your help, Kar Fai Choong kfchoong@napier.uwaterloo.ca -- Kar Fai Choong email: kfchoong@napier.uwaterloo.ca University of Waterloo ------------------------------ From: root@i486.gondor.sub.org (Erik Blass [SysAdmin]) Subject: Re: Linux 1.1.52 (Lies, Damned Lies, and Benchmarks) Date: Sat, 15 Oct 1994 16:48:03 GMT Dave Perks (dperks@gandalf.ca) wrote: : >As several have mentioned previously, : >this is probably the fault of the process table handling and scheduling : >algorithms. This needs to be fixed BADLY. : ^ no, it needs to be fixed WELL :-) And they have to go into 1.2 ! Erik -- Erik Blass|Internet erik@i486.gondor.sub.org Theegartener Str.38|42651 Solingen|Voice:0212-201660 Ich habe Dinge gesehen, die ihr Menschen niemals glauben wuerdet. Gigantische Schiffe die brannten an der Schulter des Orion. Und C-Beams - glitzernd in der Dunkelheit nahe dem Tannhaeuser Tor. All diese Momente werden verloren sein in der Zeit...so wie Traenen im Regen. Zeit zu sterben... [Roy Batty] ------------------------------ From: paai@kub.nl (J.J. Paijmans) Crossposted-To: comp.os.linux.misc Subject: Re: WP Project --Info and Volunteers WANTED!!! Date: 17 Oct 1994 08:49:43 GMT In article <37scs1$nnl@nyx10.cs.du.edu> czito@nyx10.cs.du.edu (Cory Zito) writes: > >After following the discussions on WYSIWYG Word Processing I have decided >that its time to get together a development group to create such a beast. > >Right now I am looking for input on exactly what people are looking for >in a WYSIWYG WP, People who want to help out with the project, and other >things that people feel pertain to the project. > ... Whatever you do... make sure that the "bread-text" is an ASCII-file. Take Ventura Publisher as an example: the text is in plain ASCII with markups. Bells and whistles were coded in 'parallel-files', but even these were in ASCII. If you had to travel, use a terminal or whatever, you could continue writing in the text-file and worry about the lay-out later. Also the Ventura-files were easily emailed, with or without the 'parallel-files'. Now if the Ventura markup-style could be exchanged for the LaTeX markups, you would have the best of both worlds. Paai. (BTW, as a reviewer for a computermagazine I've more or less seen everything that could be seen on the PC... ------------------------------ From: kubla@Uni-Mainz.DE (Dominik Kubla) Subject: Re: Linux Mud Date: 17 Oct 1994 09:19:00 GMT In article <37osos$f4h@server2.rz.uni-leipzig.de> weigo@asi09.rz.uni-leipzig.de (Dirk Weigenand) writes: Try Amylaars driver available from mud.uni-muenster.de. It's a driver for LP-Muds capable running in compat and native mode. There is also a mudlib available at that adress. This driver is developed on linux You also might want to look at MudOS 0.9.20. There is a tiny mudlib included for all of you who would like to start from scratch (dont expect too much, it has ed and rm, but not even ls ...). There are two rather complete mudlibs available: TMI-2 and Nightmare. Have fun, I certainly will ;-) Dominik -- =========================================================================== eMail: Dominik.Kubla@Uni-Mainz.DE sMail: Dominik Kubla, Lannerstrasse 53 55270 Ober-Olm, F.R. of Germany >>> Save the environment NOW! <<< ****** European Union ****** ------------------------------ From: bam@ver1 (Brian Mounce) Subject: Re: [Answer?!] Re: ext2fs vs. Berkeley FFS Date: 13 Oct 1994 18:21:43 GMT Reply-To: bam@dadd.ti.com Leonard N. Zubkoff (lnz@dandelion.com) wrote: > In article Stephen Tweedie writes: > In general, Linux's ext2fs is significantly faster than ffs. I don't > have hard performance data right beside me, but I can get it if you > like. From memory, ext2fs is typically 10% to 50% faster than ffs for > general use; some operations (such as unpacking a large tar archive) can > achieve a much greater speedup. [snip] > Yes, my Linux system did this five times faster than a SparcStation! I wrote a C program to build a 6-level directory structure with 12000 directories and about 13K files (about 70 MB total). This was used to test a DB structure for use on HPUX and SunOs workstations. It took 60 minutes (wall clock time) to build on a Sparc 10/41 and an HP 750. It took only 15 minutes (four times faster) on my 8MB 486DX2/50 Linux machine with a WD Caviar IDE drive. -- Brian Mounce Design Automation Division bam@dadd.ti.com Texas Instruments, Inc. MSGid BAMM MS 3937 PO BOX 655311 214-917-3647 Dallas, TX 75265 ------------------------------ Crossposted-To: comp.os.386bsd.development From: mcw@aus.hp.com (M.C Wong) Subject: Re: We a FAQ: Linux vs. *BSD!!! Date: Mon, 17 Oct 1994 03:20:42 GMT Would that be a good idea to compile list/table of features of each OS, where each of the features is assigned a score of VOTE/SOPHISTIFICATION/OR_WHAT_EVER_YOU_CALL_IT. So for a newbie to decide, he/she only needs to run through the list for the feature(s) he/she want , adds up the scores, and decide for himself/herself. Of course the score assigned to either OS features must be done by someone with rich experience with them and with an OPEN mind. Also, the features can again be broken down to different categories of granularity, eg : supported hardware, availablility of applications, ease of use and installation, stability etc etc etc. For one to decide quickly between the two, if I can't even get OS X installed on my non-supported Y machine, there is no need to look ahead and ask more about which is better, given that I won't be able to use it in the end. Anyway, one needs to toss the coin if the score works out to be equal! JM2CW! -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ M.C Wong Email: mcw@hpato.aus.hp.com Australian Telecom Operation Voice: +61 3 272 8058 Hewlett-Packard Australia Ltd Fax: +61 3 898 9257 31 Joseph St, Blackburn 3130, Australia OS: FreeBSD-1.1.5.1 http://hpato.aus.hp.com/users/mcw/www/mcw.html ------------------------------ From: kubla@Uni-Mainz.DE (Dominik Kubla) Subject: [ANNOUNCE] Linux-SDK Project Date: 17 Oct 1994 10:12:32 GMT I want to inform all of you, that Linux International's SDK project is back in business. It has been sleeping due to the lack of volunteers, also there has been a most active discussion on the mailing list some time ago. Now there is at least ONE volunteer to work with me on that project. Originally the goal was to provide a full-fledged development environment, including interface builders and CASE tools. That has been downgraded to the following agenda: * Development of an Integrated Development Environment (aka IDE) similiar to that of the Borland or Watcom Compileres under Windows. It will eventually include the following frontends (but due to extensibility it might become even more ...): - X11-based Editor - GNU C/C++/Objective-C compilers - GNU Pascal compiler - F2C Fortran-77 translator - CVS version controlling system - GNU gdb debugger - GNU gprof profiler - X11-based information browsers (man, info and html format) - X11 GUI design tool - DejaGNU program testing system - GNATS problem tracking system - Linux-specific tools (like dll-tools) * Tk/Tcl will be used for the actual development, but might be replace if necessary. (This is partly because many of the frontends already exist in tk/tcl ...) * Provide a complete documentation of the Linux environment. Fortunately we can take advantage of the Linux Documentation Project and the other already existing documentation. If you want to support this project, please drop me a mail at: Dominik.Kubla@Uni-Mainz.DE The following facilities exist for the benefit of the development team and other interested people (some of them for the development team only): Mailing list: linux-sdk@orac.iinet.com.au To join send a mail to majordomo@orac.iinet.com.au with the words 'subscribe linux-sdk in the body' FTP-Server: ftp://ftp.Uni-Mainz.DE/pub/Linux/SDK This where the test releases will show up, there is an additional hidden area for the developers. WWW-Server: This were the latest status update will be kept, accompanied by additonal Information. MUD-Server: This is a MUD which will be used as 'Virtual Conference Room' and is only accessible to the development team. Cheers, Dominik Kubla (Project coordinator) -- =========================================================================== eMail: Dominik.Kubla@Uni-Mainz.DE sMail: Dominik Kubla, Lannerstrasse 53 55270 Ober-Olm, F.R. of Germany >>> Save the environment NOW! <<< ****** European Union ****** ------------------------------ From: chrisb@stork.cssc-syd.tansu.com.au (Chris Bitmead) Subject: Re: ext2, UFS, Linux, and Mach Date: 17 Oct 94 17:08:27 In article <37mva9$b0h@magus.cs.utah.edu> jensen@peruvian.cs.utah.edu (travis jensen) writes: >I am considering a project to take the ext2fs and put a layer >of vaneer over it so it could be mounted as a UFS file system. >This would allow Mach to be able to share Linux partitions (and >vice-versa). > >A couple of questions: > >Is this even possible? I figure anything is possible, but is >this a project of weeks, months, years, or millenia? > >Where can I find documentation on the ext2fs? I would like >something a little better than source. :) > >Is this being done already? If so, who is doing it? Ext2fs has been ported to Mach/Hurd, by the current maintainer of the code I think. ------------------------------ From: chrisb@stork.cssc-syd.tansu.com.au (Chris Bitmead) Subject: Re: ext2fs vs. Berkeley FFS Date: 17 Oct 94 17:26:49 In article <199410141322.OAA05432@gblinux.de> pdcawley@ftech.co.uk writes: >In article >chrisb@stork.cssc-syd.tansu.com.au (Chris Bitmead) writes: >In another article someone writes: > > Stuff about adding 'forks' to the filesystem deleted > > But the question still remains: Why do you want this??? > >Because it makes things simpler for many uses, especially for stuff like >associating documents with applications and the like -- file is generally not >clever enough to do this sort of thing. Why not directories still? Soon you'll want to categorize your documents and you'll want two or more levels of "forks". >One could almost certainly write a far >more intuitive Desktop type frontend to X if you could be sure that all files >had associated info/data/resource forks. Then just invent a suitable convention, a la NeXT Step. > You say you would like a "main fork" in a file and then various > "attribute" forks. Why this is better than a directory I don't know. > >Because it makes it easier to write code. Even if it's syntactic sugar >'f0=open(foobar:INFO,RD_ONLY);' makes a good deal of sense, especially in >cases where foobar is an executable. Syntactic sugar is a very poor reason. Syntactic sugar issues belong firmly in user space. >I know you can stash a good deal of this >stuff in your .Xdefaults file and in /usr/lib/foobar or whereever, but it's >not exactly intuitive is it? .Xdefaults isn't intuitive at the best of times. Use some Gui interface front end for modifying your .Xdefaults. >Using data forks means that it becomes far easier >for a naive luser to move software about without breaking it by accident. Naive users are incapable of using vi and modifying .Xdefaults anyway, and under your system they will have to understand forks as well. The only answer is a nice gui program that hides all this. > Why should there be one "main" fork? And why are you too lazy to use cp -r > to copy them? > >Okay, you copy a fully working X application from one machine to another so >that it behaves in the same way on the new host as it did on the first one. >Now ask someone who doesn't have a great deal of experience with X to do the >same thing. Ask them to do the same thing with a Mac Application. I'll bet >good money that they do a far better job of the latter. What you're saying is that you don't like the separation of the app-defaults files from the binary. The X designers could have started a convention of putting them into the one directory, but they probably didn't because the app-defaults files are machine independant, but the binaries are not, thus they don't belong together. If you would prefer them in the one directory however, be my guest. But you don't need kernel support for it. > What if you start to want forks with sub-forks. Soon you'll start to want > the full facilities of directories, and we might as well leave it the way > it is. > >Oh don't be stupid. I don't see the stupidity. If you build in a limitation to an OS, (like single level forks), then immediately users are going to complain, why they can't have multi level ones. > Don't be influenced by the over-featurism that NT offers. There's no need > for this crud. > >Actually, my model for this sort of thing is the Mac filesystem. I wouldn't >call it overfeatured, but it does a lot of stuff very well, and very easily, >that is a royal PITA to accomplish with Unix. Obviously you've never heard of user level libraries. Solve it once and stop complaining. ------------------------------ From: hpa@ahab.eecs.nwu.edu (H. Peter Anvin) Subject: Re: Shared Libs: working toward a permanent solution? Reply-To: hpa@nwu.edu (H. Peter Anvin) Date: Fri, 14 Oct 1994 21:42:41 GMT Followup to: <37mepf$mei@senator-bedfellow.MIT.EDU> By author: tytso@MIT.EDU In newsgroup: comp.os.linux.development > > Unfortuantely, life's not that simple. What if you take the address of > a static variable, and store it into a structure? That structure member > might contain a pointer to a static variable local to the shared > library, or it might contain a pointer to memory in the main program's > data segment. > > Or what the library routine needs to return the pointer to a static > variable, like gethostbyname() does? > Not a problem -- just use global memory references. All I originally proposed was to use a segment register instead of ebx-relative addressing -- set up a segment register to *alias* the memory, and after that use, for example movl %gs:(%edi),%eax Instead of movl (%ebx+%edi),%eax Also, use: addl %gs:__libbase, %esi # Create absolute pointer Instead of: addl %ebx, %esi # Create absolute pointer It's a kluge, but it saves a register, which is a premium resource on the i386 architecture. Since GCC *already* can handle ebx-relative PIC addressing, it shouldn't be a difficult modification. The difficult part much have been implementing PIC in the first place. > Or what if the library program wants to call strlen(), strcpy(), or > strcat()? Those routines won't know if the passed in pointer is in the > program's data segment, or in the shared library's data segment. How does the PIC routines now handle that? > Without compiler support, people who code shared libraries would have > to be very aware of the segmentation issues, since they would have to > handle them by hand --- just as we do in the kernel. I doubt that would > be popular with applications programers. I think you read too much into this. Yes, putting shared libraries into their own segments is an architecturally attractive proposition, but it is quite non-UNIXy, and you have to deal with 48-bit pointers. It is not an option for Linux. However, the segment registers are still there, even though they are unused, and can be used to implement offset-shifting without losing the ebx register, which the current version of the ELF libraries use. /hpa -- INTERNET: hpa@nwu.edu --- Allah'u'abha --- IBM MAIL: I0050052 at IBMMAIL HAM RADIO: N9ITP or SM4TKN FIDONET: 1:115/511 or 1:115/512 STORMNET: 181:294/1 or 181:294/101 AN UNDETECTABLE ERROR HAS OCCURRED [actual MS-Windows 3.1 error message] ------------------------------ From: naaman@info.polymtl.ca (Alexandre Naaman) Crossposted-To: gnu.gcc.help Subject: Re: Looking for X graphics/ Plotting libraries Date: 17 Oct 1994 05:08:37 GMT CookieMonster (prpatel@isisa.oit.unc.edu) wrote: : I am working on a small project, and need some library routines to do : some simple X windows graphics: Pop open a window, take some disk data, : and graph the data in the window with auto-scaling, axis, etc. SInce I : want to spend more time on the data producing side of the program, I need : a package that can do the plotting for me. If you are familiar with Borland's BGI stuff I suggest you take a look at xbgi. I don't remember where I got it sorry :) Ciao, Alex. -- Alexandre Naaman | Try out my home page : Mechanical Engineering Student | http://www.polymtl.ca:8001/zuse Ecole Polytechnique de Montreal | /naaman/Mosaic/home.html ------------------------------ From: czito@nyx10.cs.du.edu (Cory Zito) Crossposted-To: comp.os.linux.misc Subject: WP Project --Info and Volunteers WANTED!!! Date: 16 Oct 1994 17:26:57 -0600 After following the discussions on WYSIWYG Word Processing I have decided that its time to get together a development group to create such a beast. Right now I am looking for input on exactly what people are looking for in a WYSIWYG WP, People who want to help out with the project, and other things that people feel pertain to the project. In a couple of days I should have a web site and a project goals sheet up (after I get some input) Thanks, Cory Zito -- * Cory Zito * Email: CZITO@NYX10.CS.DU.EDU * * AA9GB * In protest of .sigs this sig is blank * * Saxophonist * * * Student * * ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Development-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.development) via: Internet: Linux-Development@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Development Digest ****************************** .