From: Digestifier To: Linux-Development@senator-bedfellow.mit.edu Reply-To: Linux-Development@senator-bedfellow.mit.edu Date: Wed, 5 Oct 94 09:13:08 EDT Subject: Linux-Development Digest #267 Linux-Development Digest #267, Volume #2 Wed, 5 Oct 94 09:13:08 EDT Contents: Re: Linux on Pentium P90 PCI---which motherboard? (Kai Leibrandt) Question on writing program to access serial ports & buffering (Doug Fields) [INFO] Adaptec 274x 284x 294x SCSI adapters (Michael Blair Mathers) Re: weird linux hangs 1.0.9 -> 1.1.51 inclusive... (Steve Kneizys) Re: ifmail25 trap.c (Roland Rosenfeld) Re: umount problem! (Uwe Bonnes) interface handling multiple IPs (Michael Nelson) Re: Anyone have info on Colorado Memory Systems' QFA-700 QIC-02 controller? (Rui-Tao Dong ~{6-HpLN~}) Re: [Wine] "Can't build if1632.o" Now what? (Frank Botte) Re: Linux Mud (Wayne Hodgen) Re: OpenGL and GLX (Christoph Kukulies) Re: What is ELF ? (Mitchum DSouza) Re: people using SCSI-IN2000 driver, please read this (Andre Fachat) Re: Anyone have info on Colorado Memory System (Kevin Burtch) Re: weird linux hangs 1.0.9 -> 1.1.51 inclusive... (Peter Brouwer) ---------------------------------------------------------------------------- Crossposted-To: comp.os.linux.misc From: Kai.Leibrandt@brunel.ac.uk (Kai Leibrandt) Subject: Re: Linux on Pentium P90 PCI---which motherboard? Date: Tue, 4 Oct 1994 18:49:04 GMT Mikael Lyngvig (milyng@netcom.com) wrote: : pratt@Sunburn.Stanford.EDU (Vaughan R. Pratt) writes: : I'm using a Zeos P90 PCI - it has only been a few days since I installed, : though. Seems like it runs just fine and smaller load on heavy tasks than : I get on NETCOM at 3:30 am ;) I haven't got X to run yet; xinit complains : about a missing config file. My configuration is: : Zeos P90, 16 MB RAM, 540 MB IDE HD & 340 MB IDE HD, Mitsumi CD-ROM (*), : 2 * 16550 serial ports, Phoenix BIOS (v4.0??), Diamond Stealth 64 (using : the S3 Vision 964 64-bit chip - not tested yet...), Practical Peripherals : PM14400FXMT modem - not tested yet), Microsoft mouse (not tested yet). : I been throught a lot of the standard Unix utils, and they all seem to run : just fine. : (*) The Mitsumi drive, as configured by Zeos, needs the command "mcd=0x310,10" ^^^^^^^^^^^^^^ : when booting the Mitsumi kernel otherwise Linux won't recognize the drive. Try rebuilding your kernel, after having changed the IRQ and BASE_ADDR entries in /usr/src/linux/include/linux/mcd.h, to whatever you need them to be. You shouldn't need to manually tell the kernel what's where on rebooring after this. Hope this is any help, Kailee. -- ____________________________________________________________________ Interaction Design Research ____________________________________________________________________ Kai Leibrandt BSc(Hons) Kai.Leibrandt@brunel.ac.uk ------------------------------ From: admiral@panix.com (Doug Fields) Subject: Question on writing program to access serial ports & buffering Date: 4 Oct 1994 23:28:32 -0400 Hello cyberspace! I'm trying to write a simple program which will write a string to a modem and dump the results to the screen. This is a prelude to a more complicated program. The problem is, from the way that I've set up the serial port, it seems as if the operating system, Linux 1.1.51, is not buffering the characters from the modem, so if I don't read them immediately when they are received, they get lost (overrun). (Does anyone know of a good reference for this kind of thing other than getty and comm programs?) How do I tell the operating system to buffer the incoming characters? I'm using /dev/cua0 at 2400 BPS. Here is a relevant snippet of code. How would I modify this code to get the behavior I desire? Thanks, Doug (code follows, comments are C++ style, _filedes has been opened O_RDWR | O_SYNC) struct termios modem; // Get current modem attributes tcgetattr(_filedes, &modem); _baud_rate = B2400; cfsetospeed(&modem, _baud_rate); cfsetispeed(&modem, _baud_rate); // Set to 7 bits modem.c_cflag = (modem.c_cflag & ~CSIZE) | CS7; // Set to raw, no echo mode modem.c_iflag &= ~(IGNBRK | IGNCR | INLCR | ICRNL | IUCLC | IXANY | IXON | IXOFF | INPCK | ISTRIP); modem.c_iflag |= (BRKINT | IGNPAR); modem.c_oflag &= ~OPOST; modem.c_lflag = ~(ICANON | ISIG | ECHO | ECHONL | ECHOE | ECHOK); modem.c_cflag |= CREAD | CRTSCTS; modem.c_cc[VMIN] = 1; modem.c_cc[VTIME] = 0; // Turn off all flow control modem.c_cflag &= ~CRTSCTS; modem.c_iflag &= ~IXON; // Set to even parity modem.c_cflag &= ~(PARENB | PARODD); modem.c_cflag |= PARENB; // And install the new parameters tcsetattr(_filedes, TCSANOW, &modem); ------------------------------ From: mathers2@cps.msu.edu (Michael Blair Mathers) Subject: [INFO] Adaptec 274x 284x 294x SCSI adapters Date: 4 Oct 1994 16:46:48 GMT There have been several questions about support for these SCSI adapters. As I was among many people asking, now that I have some information it would be wrong of me not to post it. These adapters are all essentially the same. The 274x is EISA version. The 284x is the VL-Bus version. And the 294x is the PCI version. There is an alpha interim driver written that is supposedly fairly stable. I have not used it as of yet. The driver as of now only supports teh EISA and VL-Bus versions. Support for the PCI is supposed to be coming soon. The latest version and patches of the driver can be anonymously ftp'd from the following ftp site: ftp.cpsc.calgary.ca /pub/systems/linux/aha274x Slackware bootdisks are also included as is more information about the driver and its future. -Mike mathers2@cps.msu.edu member of MLA (Michigan State Linux Association) ------------------------------ Subject: Re: weird linux hangs 1.0.9 -> 1.1.51 inclusive... From: STEVO@acad.ursinus.edu (Steve Kneizys) Date: 4 Oct 94 12:44:56 EST Paul Erkkila (pee@cci.com) wrote: : We are having a problem with linux "hanging" on out P5 EISA/VLB : machine. (90 mhz) . General symtoms before the hang are non-exsistent as : far as I can tell. One minute it's up , and then boom Dead. No console control : no net access , no cntl-alt-del. It has to be cold booted/ reset. I've read : other posts to this group complaining of similar occurences, and would like to : help sort it out. Is there any kernel logging/ profiling that can be enabled : so I can log what is going on? Disk space and logging time are NOT a : problem and I would really like to get to the bottom of this. I saw the kernel : profiling option for the configure but I have no idea how to take advantage of : this option. : Hardware : P5-90 : NE2000 ethernet card : AHA 2842 SCSI (also tried a 1542 same problems) : 64meg ram : 30+meg swap ( also tried no swap) : 4 Seagate 1.1 gig drives : Any and all info appreciated ... : -pee : -- I have had Novell servers crash due to hardware that was not obvious. Like a timing bug in the SCSI controller that happened once in a while, a bad BIOS on a brand new design motherboard, and even a video card! All of these things have caused weird unexplained hangs on Novell equip, wiht perfectly functioning software. Since this is a new Pentium motherboard...is there a way you could put in a 486 motherboard and keep everything else constant? No everybody has such things sitting around (I keep a spare file server or two handy!) I just discovered that REALTEK (GOOD) video cards that work fine in lots of brands of compatibles stopped working on a 486DLC-40 box, a slight bus timing difference. Happens only once in a while, but would make the boxes hang! How annoying...I have 45 of these boxes. Good luck. I *hate* it when it happens to me, but it does all too often... Steve... ------------------------------ Date: Mon, 03 Oct 1994 20:54:29 +0100 From: roland@p13.flokiste.fido.de (Roland Rosenfeld) Subject: Re: ifmail25 trap.c Hi Champ! Champ Clark (c-clark@freenet3.scri.fsu.edu) wrote: > I am attempting to compile ifmail25, and have hit some errors > , namely in iflib/trap.c . Seems that it gets a "context" > error (sorry, I am at work, and cannot see the errors). > This was compiled with slakeware 2.0.0... This is a problem with the different Linux-Versions. I have the same problem and I use Linux 1.0.9. Some searching showed me, that the missing type is defined in some file, which is a linux-kernel-header in 1.1.* and which is only in the kernel-source upto 1.0.9. Here's a little workaround: Patch trap.c with this: ===================== schnipp ============================= --- trap.c~ Sun Jul 10 18:35:06 1994 +++ trap.c Mon Aug 29 01:00:47 1994 @@ -15,6 +15,7 @@ #include #undef __KERNEL__ #define iBCS2 +#include "sigcontext.h" #elif defined(sun) #define SUNSTYLE #elif defined(SVR4) ===================== schnipp ============================= And then put this _new_ file into ifmail/iflib: sigcontext.h: ===================== schnipp ============================= struct sigcontext_struct { unsigned short gs, __gsh; unsigned short fs, __fsh; unsigned short es, __esh; unsigned short ds, __dsh; unsigned long edi; unsigned long esi; unsigned long ebp; unsigned long esp; unsigned long ebx; unsigned long edx; unsigned long ecx; unsigned long eax; unsigned long trapno; unsigned long err; unsigned long eip; unsigned short cs, __csh; unsigned long eflags; unsigned long esp_at_signal; unsigned short ss, __ssh; unsigned long i387; unsigned long oldmask; unsigned long cr2; }; ===================== schnipp ============================= This works without any problems. Bye Roland -- * Internet: roland@p13.flokiste.fido.de * Fido: 2:2450/111.13 * ------------------------------ From: bon@lte.e-technik.uni-erlangen.de (Uwe Bonnes) Subject: Re: umount problem! Date: Wed, 5 Oct 1994 06:11:17 GMT Mark D. Roth (roth@ux4.cso.uiuc.edu) wrote: > I just encountered a weird problem with umount. I am using the umount > that comes with the binary distrib of util-linux-1.10 under linux > 1.1.51. When I mount a floppy and move files to it (the filesystem > was ext), and then umount it, is SOMETIMES seg-faults. Here's the > output from the syslog: stuff deleted: check for the patches on ftp.imag.fr:pub/Linux/ZLIBC. The newest (floppy related) files are: pub/Linux/ZLIBC/floppy/ALPHA/fdp1.1.51-0410.diff.gz (alpha fixes with new features) pub/Linux/ZLIBC/floppy/QDF/fdp1.1.51-0410.diff.gz (quick&dirty fixes with lower probability of new bugs) pub/Linux/ZLIBC/floppy/misc/dma0410.diff.gz (newest dma patches) pub/Linux/ZLIBC/fdutils/ALPHA/fdu0110.taz (utilities) -- Uwe Bonnes bon@lte.e-technik.uni-erlangen.de ------------------------------ From: mikenel@netcom.com (Michael Nelson) Subject: interface handling multiple IPs Date: Mon, 3 Oct 1994 03:17:55 GMT What parts of the IP code needs to be changed to allow an interface (eth0) to handle multiple IP addresses? -- Mike -- ____________________________________________________________________________ Michael Nelson | mikenel@netcom.com Rockville, Maryland | mikenel@newport.org PGP Public Key: Finger or ftp.netcom.com:/pub/mikenel/pubkey.asc ------------------------------ From: rdong@math.uci.edu (Rui-Tao Dong ~{6-HpLN~}) Crossposted-To: comp.os.linux.help Subject: Re: Anyone have info on Colorado Memory Systems' QFA-700 QIC-02 controller? Date: 04 Oct 94 17:59:26 GMT >>>>> On 1 Oct 1994 20:53:34 GMT, c-huegen@crh0033.urh.uiuc.edu (Craig A. Huegen) said: c-huegen> Does anyone have any information on Colorado Memory Systems' c-huegen> QFA-700 QIC-02 controller/tape drive combo? I purchased one for c-huegen> my DOS machine, but I'd like to be able to use it with Linux. Well, yes and no. If you are lucky to find a PC-02 controller, then it works great. If you are stuck with the TC-02, I don't think anyone has figured out how to make it work (yet). I bought mine from JEM computer in Cambridge and had to swap the controller from them. Regards, Rui-Tao Dong ~{6-HpLN~} Department of Mathematics rdong@math.uci.edu University of California (714)725-2713(O) (714)856-7993(Fax) Irvine, CA 92717-3875 ------------------------------ From: frbo@marvin.central.de (Frank Botte) Subject: Re: [Wine] "Can't build if1632.o" Now what? Date: Mon, 3 Oct 1994 11:28:21 GMT C. Engelmann (engel@yacc.central.de) wrote: : joel@wam.umd.edu (Joel M. Hoffman) writes: : >I found a copy of makedepend, which doesn't quite work right but seems : >to work well enough, and now I'm trying to build a copy of Wine, : >specifically, wine940912. But the make keeps dying on if1632.o: : > make: *** No rule to make target `if1632.o'. Stop. : >Indeed, I can find no if1632 source file. The README mentions a small : >change to if1632.S, but I can't find that file anywhere. : >Now what? : I had the same problem patching wine to the september edition - : but I couldn't solve it. : So I got the full source tree and it works. : There is a subdirectory named if1632, but there is only : a file called 'call.S'. I compiled Wine (940912) successfully. The only thing I had to do, to get Configure working was a link from '/usr/X11/lib/X11/config' inside the Wine directory. After that Wine compiled well for me. by Frank ------------------------------ From: hodgen@informatik.uni-koblenz.de (Wayne Hodgen) Subject: Re: Linux Mud Date: 4 Oct 1994 08:19:52 GMT Reply-To: hodgen@infko.uni-koblenz.de |> >I've recompiled and run both LambdaMOO and ColdMUD successfulyl under linux. |> >:) |> |> Add to that list both MUSH and Interlude, and the author of Interlude |> just bought a Linux machine so I expect Interlude/CodaII will be |> natively developed on Linux. And the Mythos team does its home development using the Genesis CD 3.31 LPmud driver on Linux machines. -- Wayne Hodgen | hodgen@informatik.uni-koblenz.de | #include ------------------------------ From: kuku@acds.physik.rwth-aachen.de (Christoph Kukulies) Crossposted-To: comp.windows.x,comp.graphics.opengl,comp.graphics Subject: Re: OpenGL and GLX Date: 4 Oct 1994 08:35:43 GMT Mark Lin (mlin@ERC.MsState.Edu) wrote: : bryan heidorn (pbh@lis.pitt.edu) wrote: : : Hello, : : There have been several posts over the last several weeks/months in : : the OpenGL related news groups about running OpenGL on a PC. I have : : not seen much appear about this issue in the Xwindows or Linux groups. : : I (and apparently several others) am interested in running GLX, the X : : extension for OpenGL, under Linux on my PC with an SGI as the OpenGL server. : Doesn't the package, "vogle," allow one to perform somewhat smiliar to this? Note that there are vogl and vogle. These are different though similar. vogl is a gl implementation of earlier SGI's GL dialects and (I believe) is not an implementaion of OPENGL. vogle has some extensions that cannot be found in GL - don't ask me what at the moment. It may be a choice. OTOH its only a client, that is it does not implement GLX functionality on the server side. : -- : ---------- ---------- ---------- : Mark Lin mlin@nwu.edu : Northwestern University Biomedical Engineering -- --Chris Christoph P. U. Kukulies kuku@acds.physik.rwth-aachen.de FreeBSD 1.1.0(Current) (GILSYSCONS) #12: Fri Jun 3 13:36:12 MET DST 1994 ------------------------------ From: Mitchum.DSouza@mrc-apu.cam.ac.uk (Mitchum DSouza) Subject: Re: What is ELF ? Date: 5 Oct 1994 09:23:51 GMT In article <1994Oct3.151940.8708@sifon.cc.mcgill.ca>, whitney@christie.Meakins.McGill.CA (Whitney de Vries) writes: |> |> What is ELF ? What other systems use ELF ? |> Where can I find a description of it ? |> See tsx-11.mit.edu:/pub/linux/packages/GCC/ELF.doc.tar.gz Mitch ------------------------------ From: fs1@aixterm1.urz.uni-heidelberg.de (Andre Fachat) Subject: Re: people using SCSI-IN2000 driver, please read this Date: 4 Oct 1994 16:52:35 GMT : I can remember there was a kernel-warning: : ******bdflush not running******* : Can anybody explain this warning? If you don't have bdflush running, you get into trouble with newer kernels. install it and then try again. Andre -- Andre Fachat mail me! fachat@galileo.rhein-neckar.de For some it is MS-Windows, for others it's the longest batch file on earth... ------------------------------ From: kburtch@pts.mot.com (Kevin Burtch) Subject: Re: Anyone have info on Colorado Memory System Reply-To: kburtch@pts.mot.com Date: Mon, 3 Oct 1994 18:32:38 GMT To: c-huegen@crh0033.urh.uiuc.edu Subject: Re: Anyone have info on Colorado Memory System Cc: In article l1v@vixen.cso.uiuc.edu, c-huegen@crh0033.urh.uiuc.edu (Craig A. Huegen) writes: >Does anyone have any information on Colorado Memory Systems' QFA-700 >QIC-02 controller/tape drive combo? I purchased one for my DOS machine, >but I'd like to be able to use it with Linux. Ditto, from Jem. Nice drive, fast, quiet, and great price! >Problem is, Colorado Memory Systems have since discontinued the product, >yet they aren't giving any information on programming the controller card. Yes, and they are quite rude about it too! >I'd like to write a device driver for it, if anyone has any information >on it. The controller card uses Stac hardware compression, and is >jumperless. Well, have you contacted the "Tape channel" of the linux developers? ( I can't remember how, but it's in the FAQ :) Some stuff I learned that *might* help you... The 350M mode is known as CMS-350, which is a Colerado-specific standard. It apparently slows the tape down, while maintaining the same data throughput, to achieve the higher data density. It still uses the same number of heads as QIC-150 though... so QIC-525(?) is impossible. The controller is known as the PC02, and there is another known as the TC02 (jumpered, no compression) that will work with linux, but will limit your drive to QFA-500 storage capacity. (QIC-150) >Thanks for any help in advance... > >--Craig I hope this helped, as I'd _love_ to use it with linux! Kevin P.S. I found an MS-DOS TAR.EXE that is supposed to work with QIC-02 drives... it doesn't work either. :( ------------------------------ From: pb@apd.dec.com (Peter Brouwer) Subject: Re: weird linux hangs 1.0.9 -> 1.1.51 inclusive... Date: 5 Oct 94 10:30:38 GMT Reply-To: pb@apd.dec.com (Peter Brouwer) In pee@cci.com (Paul Erkkila) writes: > We are having a problem with linux "hanging" on out P5 EISA/VLB >machine. (90 mhz) . General symtoms before the hang are non-exsistent as >Hardware >P5-90 >NE2000 ethernet card >AHA 2842 SCSI (also tried a 1542 same problems) Does a NE2000 uses DMA channels? If so does it use the same channel as the AHA card? A second guess , is the IO address for both cards the same? -- Regards, Peter Brouwer \\\// pb@apd.dec.com (0 0) ===================================oOO==(_)==OOo============================ # Digital Equipment B.V. / WorkGroup Systems, # DIGITAL : HLDEO1::BROUWER_P,829-4218 \ Dep LinkWorks Engineering, P.O.Box 245, # PHONE:[+31][0]55 43 ext 4218,fax 9133 7300AE Apeldoorn, The Netherlands. ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Development-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.development) via: Internet: Linux-Development@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Development Digest ****************************** .