From: Digestifier To: Linux-Development@senator-bedfellow.mit.edu Reply-To: Linux-Development@senator-bedfellow.mit.edu Date: Fri, 23 Sep 94 09:13:10 EDT Subject: Linux-Development Digest #210 Linux-Development Digest #210, Volume #2 Fri, 23 Sep 94 09:13:10 EDT Contents: Re: Proteon Token-Ring Driver Survey (Michael Martin) Re: LOOPBACK not handling packet load. (Mark Evans) floppy release bug. was: 1.1.51 breaks shutdown's unmount (David Flood) Re: AHA1542A and Linux-1.1.50+ are having troubles.. (Riku Meskanen) NE2000+ and AHA1542CF problems (Dermot Bradley) Re: 1.1.51 seg fault on shutdown in _floppy_release (Mark Evans) memory leakage in 1.1.51 ? (Guenther Thomsen) Re: 480x360 Res works for me. (Philippe Steindl) Driver D-Link DE620 (Johan Montald) Re: memory leakage in 1.1.51 ? (Michael H. Price II) Re: Looking for a Fax daemon (Heiko Schlittermann) integer sizes was Re: Alpha Linux (Andrew Bulhak) Re: Source Code (Vassili Leonov) Re: NCR 53C406A SCSI (Kevin Lentin) Re: 900 MHz CB band??? (Vassili Leonov) Re: Don't use Linux?! (Keith Smith) ---------------------------------------------------------------------------- From: mmart@starbase.neosoft.com (Michael Martin) Subject: Re: Proteon Token-Ring Driver Survey Date: 21 Sep 1994 05:01:51 GMT Todd B. Templeton (toddt@phelpsd.com) wrote: : There is currently an alpha driver for the IBM adapters... -- Sorry to waste your time with this reply, but I *desperately* need support for IBM token-ring. Can you point to the people who have this alpha code? I've asked here several times before, with no response :( Thanx Michael *---------------------------------------------------------------------------* *Michael L. Martin | A Law is not Just, just because it's a law. * *mmart@starbase.neosoft.com | * *---------------------------------------------------------------------------* ------------------------------ From: evansmp@mb4715.aston.ac.uk (Mark Evans) Subject: Re: LOOPBACK not handling packet load. Date: Wed, 21 Sep 1994 12:16:10 GMT Thomas Koenig (ig25@fg70.rz.uni-karlsruhe.de) wrote: : Chip Edwards (gt6444c@prism.gatech.edu) wrote in comp.os.linux.development, : article <34rfcu$9ch@acmex.gatech.edu>: : >I'm not sure who to send this to soo.. : > Some have noticed the ping -f on the loopback device fails miserably. : The reason for this is a bit more complex: : ping -f sends out ICMP commands in raw mode, and then listens to the : same socket. : For each packet sent out, there are two packets coming back: the one : that was sent out, and the ICMP reply. : However, ping only does one recvfrom() for everything it sends out. So, : packets start queuing up, and finally get dropped. This is more of a : bug in ping than in the loopback device. To fix this is quite trivial, simply enable non blocking io on the fd and do something like while(recvfrom(fd, buf, buf_len, &addr, &addr_len) >=0) { ... do whatever... ... } n.b. I don't have the source to ping handy. ------------------------------ From: dcflood@u.washington.edu (David Flood) Subject: floppy release bug. was: 1.1.51 breaks shutdown's unmount Date: 20 Sep 1994 08:00:28 GMT After getting several RTFM's about reporting bugs, here is the related part of zSystem's list. I have inserted the eip in the appropriate place. 0015e0d4 t _floppy_read 0015e154 t _floppy_write 0015e1fc t _floppy_release eip = 0010:0015e220 0015e2c0 t _floppy_open 0015e5d8 t _ack_change 0015e654 t _check_floppy_change Since I don't use a floppy on my other machine, this explains why the error does not occur there. -- ============================================================================= dcflood@u.washington.edu The above opinions are mine alone and do not reflect anyone elses. Besides, who wants my opinion anyway? ============================================================================= ------------------------------ From: mesrik@tukki.jyu.fi (Riku Meskanen) Subject: Re: AHA1542A and Linux-1.1.50+ are having troubles.. Date: 22 Sep 1994 15:31:14 GMT Bill Davidsen (davidsen@usenety1.news.prodigy.com) wrote: : In article , Matti Aarnio wrote: : :On System: : : - i486/33 32MB DRAM (ISA) : : - Adaptec AHA1542A + 600 MB CDC Wren-V disk : : : :When running Linux 1.0.9 there is no trouble, however with : :Linux 1.1.50 and 1.1.51 there appear spodaric data corruption : :on the disk WRITES. : I'm jealous! I never got my 1542A to work at all with Linux on any : version. If this gets fixed I may have to upgrade. You should get newer Microcode and SCSI-BIOS to get that thingie working. Old 1542A:s had a lot of problems with SCO:s too. I have had no problems since November -92 (0.97) with my 1542A, it's working great now with 1.1.49, even after I patched the PROM to handle new address 334. I have 2 disks with 478MB storage, Archive Viper 2150S and Tohshiba XM-4101B all in internal bus. So both SCSI and SCSI-2 type devices work great for me. :-) riku ps. Comment suggesting that I should dump that old Adaptec card to /dev/null. I will indeed dump it when i upgrade to Pentium & PCI class, but I'll wait until it gets a bit more matured technology. Haven't got too much money to spend on exprimenting, if using Linux is not counted ;-) -- #include /* missing cool .signature -- got a spare? */ ------------------------------ From: bradley@gpl.com (Dermot Bradley) Crossposted-To: comp.os.linux.help,comp.os.linux.misc Subject: NE2000+ and AHA1542CF problems Date: 22 Sep 1994 19:22:06 GMT Hi I've got a 486/66DX2 running with 16Mb RAM, NE2000+ (Novell) ethernet card, Adaptec 1542CF. Running kernel 1.0.9 This machine has mysteriously hung (i.e. needed power cyle) the last few weekends for no apparent reason. The NE2000+ is port 300h, IRQ 3 (NO SERIAL CARDS ARE FITTED IN PC) and in shared IO mode. The 1542CF is port 330h, IRQ 11, DMA 5. For some time I've been seeing the following messages in the log files: In the debug file: ================== Sep 13 18:37:17 errigle kernel: eth0: transmit timed out, TX status 0xe, ISR 0x0. Sep 13 18:37:17 errigle kernel: eth0: Possible network cable problem? In the syslog file: =================== Aug 8 03:03:49 errigle kernel: SCSI host 0 timed out - aborting command Aug 8 13:42:40 errigle kernel: eth0: Transmitter access conflict. Aug 15 19:19:54 errigle kernel: eth0: DMAing conflict in ne_block_output.[DMAstat:fffffffe][irqlock:ffffffff] Aug 22 15:03:05 errigle kernel: SCSI host 0 timed out - aborting command Aug 22 15:26:37 errigle kernel: eth0: DMAing conflict in ne_block_output.[DMAstat:fffffffe][irqlock:ffffffff] Aug 22 22:55:03 errigle kernel: SCSI host 0 timed out - aborting command Aug 23 05:07:52 errigle kernel: eth0: unexpected TX-done interrupt, lasttx=-1. Aug 23 05:07:52 errigle kernel: eth0: idle transmitter, tx1=60, lasttx=-1, txing=-1. Aug 23 05:15:45 errigle kernel: SCSI host 0 timed out - aborting command Aug 23 07:54:55 errigle kernel: SCSI host 0 timed out - aborting command .......... Sep 19 13:31:29 errigle kernel: SCSI host 0 timed out - aborting command Sep 19 20:51:21 errigle kernel: eth0: DMAing conflict in ne_block_output.[DMAsta t:fffffffe][irqlock:ffffffff] To cap it all I got the following on the console today: Sep 22 13:28:00 errigle kernel: Unable to handle kernel NULL pointer dereference at address 00000004 Sep 22 13:28:00 errigle kernel: Oops: 0000 Sep 22 13:28:00 errigle kernel: EIP: 0010:0012afa7 Sep 22 13:28:00 errigle kernel: EFLAGS: 00010202 Sep 22 13:28:00 errigle kernel: eax: 00000000 ebx: 00e5129a ecx: 00000008 edx: 0012af38 Sep 22 13:28:00 errigle kernel: esi: 00000850 edi: 001991c4 ebp: 0000000e esp: 005aef68 Sep 22 13:28:00 errigle kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Sep 22 13:28:00 errigle kernel: Process netstat (pid: 4615, process nr: 32, stackpage=005ae000) Sep 22 13:28:00 errigle kernel: Stack: 00e51000 00000400 0000a800 002c4620 001991d2 Sep 22 13:28:00 errigle kernel: Code: 8b 48 04 51 0f bf 10 52 8b 40 08 50 8b 8e 7c 89 19 00 51 8b Anyone got ANY ideas!!!!!! Should I upgrade the kernel and if so to which version?? Please email me as well as posting so I don't miss out. On a similar vein another machine (IDE, NE200 clone) gave the same "eth0: transmit timed out, TX status 0xe, ISR 0x0." "eth0: Possible network cable problem?" messages last weekend. The strange thing was it was NOT connected to any ethernet at the time.....I had it at home!!!!!! Thanks in advance Dermot -- Dermot Bradley Communications Director Genesis Project Ltd bradley@gpl.com ------------------------------ From: evansmp@mb4715.aston.ac.uk (Mark Evans) Subject: Re: 1.1.51 seg fault on shutdown in _floppy_release Date: Wed, 21 Sep 1994 12:26:09 GMT Vincent Fatica (vefatica@cockpit.syr.edu) wrote: : According to zSystem, the error occurs in _floppy_release. : It also occurs on dismounting /b (an ext2 floppy). Thereafter, mount says : it's still mounted (which it's not). thats becuase umount actually alters /etc/mtab & /etc/mtab~ after it has done the umount() system call, the program will terminate in this system call. I'm just putting some printk's in this function to see where it actually does terminate. ------------------------------ From: thomsen@cs.tu-berlin.de (Guenther Thomsen) Subject: memory leakage in 1.1.51 ? Date: 21 Sep 1994 12:19:16 GMT Hello, it seems, there is an memory leakage (at least) in linux-1.1.51 : if I run two processes wich use (permanent) together more memory than my machine gots as RAM, the machine is continiously swapping - ok. But over the time the swap-space which is needed grows, without increasing memory requirements of the two processes or any other ! This grow is (very) slowly (about 1Mb / hour ) but unstoppable - anytime all the swap-space will be needed and the response time of the machine becomes unreasonable slow ! If the processes terminates, they give back their and the mysterious used swap space. So there is no problem with sufficient swap space and short duration processes. My machine: Linux 1.1.51 80386dx20MHz,ISA,8Mb RAM 10 or 23 Mb swap space Processes to test: 2*gnuchessx started from xboard, each uses about 7.6 Mb virtuell memory ('size'). other processes running: X (2.0) fvwm xterm top / free Guenther -- G\"unther Thomsen send eMail to thomsen@cs.tu-berlin.de ------------------------------ From: psteindl@il.us.swissbank.com (Philippe Steindl) Subject: Re: 480x360 Res works for me. Date: 19 Sep 1994 07:02:59 GMT Reply-To: ilg@imp.ch ]>: DOOM runs fine, now to find solutions to the ctrl, alt - arrow keys ]>: combinations, (my window manager takes over), and getting the sound ]>: to work, probably need to upgrade my driver. ] ]I just hit NumLock. It seems to change the entire keyboard mapping, not ]just the keypad. All the twm shortcuts I put in go away when NumLock is ] toggled. Hm, besides that you may change your .doomrc file, there you can remap the keys. Happy dooming Philippe Steindl -- ====================+=================================================== Philippe Steindl | Any opinions expressed are my own E-mail: ilg@imp.ch | and not necessarily those of the | Swiss Bank Corporation. ====================+=================================================== ------------------------------ From: johan@dombo (Johan Montald) Subject: Driver D-Link DE620 Date: 22 Sep 1994 16:10:18 GMT Well the title says it all ? Is there a driver available for the newly DE620 which has some new microcode ? ______________________________________________________________ Johan Montald / Customer Representative /// Computer Associates International Belgium /// / Woluwelaan 34 B13 /// / / 1200 Brussels ///// / / Belgium ///// / / / email: johan@ingres.com /////// / / / phone: +32-2/773.28.11 ext 865 ///////// / / / fax : +32-2/762.73.59 ///////////// / / ____________________________________________________///////////////////. God is real, unless declared integer ------------------------------ From: mhp1@ra (Michael H. Price II) Subject: Re: memory leakage in 1.1.51 ? Date: 22 Sep 1994 05:25:35 GMT Reply-To: mhp1@Ra.MsState.Edu In article <35q5do$3n3@myrddin.imat.com> nelson@seahunt.imat.com (Michael_Nelson) writes: > -> Looks like a problem, allright... > > ...but it doesn't seem to be specific to 1.51. It does the same > here with 1.50. I have had similar problems with rplay. I've watched it eat up all memory until it uses it all and a segmentation fault results. I assumed it was a bug in the rplay code. Michael. ------------------------------ From: heiko@lotte.sax.de (Heiko Schlittermann) Subject: Re: Looking for a Fax daemon Date: Thu, 22 Sep 1994 11:22:30 GMT In article , Robert J. LeBlanc wrote: >tom@metronet.com (Tom Griffing) writes: > >>In article <3532qg$siv@ringer.cs.utsa.edu>, >>Rob Coursey wrote: > >>>I was just wondering if somebody had already either started or had completed >>>a fax server for linux and, of course, if so, would you know the location >>>of where it might be? > >>Try "efax". It's a simple fax program for one machine. >>It runs as a daemon, and upon receiving an incoming call, >>if it is a fax, it receives it (and prints it if you want) >>and saves it as a file. If the call is a data call, it >>can call another program to handle it. > >If it's a fax SERVER you're looking for, both FlexFAX (at sgi.com) and >efax can do the job, though if you opt for efax you should add the What about mgetty+sendfax? It compiled out of the box. The mgetty sits at a given port and handles incoming calls depending on if they where faxes or data (login). If the fax reception is completed, it calls an other program to forward it by mail, or to notify a spec. user, or to print the fax, or to switch on your toaster... For fax sending there is a simple spool mechanism provided. For me it works pretty (?) well. -- heiko ------------------------------ From: acbul1@penfold.cc.monash.edu.au (Andrew Bulhak) Crossposted-To: comp.lang.c Subject: integer sizes was Re: Alpha Linux Date: 20 Sep 1994 06:57:50 GMT Steven A. Reisman (sar@bee.beehive.mn.org) wrote: : Albert D. Cahalan (adc@bach.coe.neu.edu) wrote: : : Why drop one? (8 bits = char) : : 16 bits = short int : : 32 bits = int : : 64 bits = long : 128 bits = long long :) This may merit discussion on comp.lang.c. Sooner or later, we will need more sizes, as soon as somebody makes a 128-bit CPU. -- Andrew Bulhak acb@yoyo.cc.monash.edu.au Remember the good old days, when "spam" on the Net referred to processed meat? ------------------------------ From: vassili@cs.sunysb.edu (Vassili Leonov) Subject: Re: Source Code Date: 21 Sep 1994 21:31:28 GMT Matt Fredrick Kraft (mfkraf01@starbase.spd.louisville.edu) wrote: : could anyone tell me where I can get the orig. Source code for linux : I need an FTP sight with Source and Docs. availiable. Some ambitious fri ends of mine and I are going to try to port Linux to Power Mac Bin for a science Fair project. Thanks in Advance. : Matt Kraft : University of Louisville The easiest way is to buy an Infomagic 2CD set. The second easiect way is to go suncite.mit.edu:/pub/Linux ------------------------------ From: kevinl@bruce.cs.monash.edu.au (Kevin Lentin) Subject: Re: NCR 53C406A SCSI Date: 23 Sep 1994 00:47:41 GMT Pete Cascio (cascio_p@kant.cs.mci.com) wrote: > I've got a Media Vision Pro 3D sound card with SCSI-2. The SCSI-2 chip is an > NCR 53C406A. It looks like it's probably something new, since it's not > mentioned in the SCSI-HOWTO. > Does anyone know about this chip? Is it compatible (no changes required) with > another supported NCR SCSI chip driver? If not, know where I can get a NCR > data sheet on the chip -- so I can patch the nearest NCR driver code? I think Patrick D'Cruze may have solved your problem. Try this: tsx-11.mit.edu:/pub/linux/ALPHA/scsi/acculogic-0.7.README /acculogic-0.7.lsm /acculogic-0.7.patch.gz -- [==================================================================] [ Kevin Lentin |___/~\__/~\___/~~~~\__/~\__/~\_| ] [ kevinl@bruce.cs.monash.edu.au |___/~\/~\_____/~\______/~\/~\__| ] [ Macintrash: 'Just say NO!' |___/~\__/~\___/~~~~\____/~~\___| ] [==================================================================] ------------------------------ From: vassili@cs.sunysb.edu (Vassili Leonov) Subject: Re: 900 MHz CB band??? Date: 21 Sep 1994 21:35:53 GMT Alexandra Griffin (acg@kzin.cen.ufl.edu) wrote: : I was unaware of the existence of a CB band @ 900MHz. How much : bandwidth is available there? What restrictions exist w.r.t. : transmitter power, etc.? This band is free from acceptable-use : limitations? : Since it's not legal to operate a home-built rig outside the amateur : bands (right? type-approval needed?), where can equipment for this : 900-MHz band be obtained? To bring it to topic - there is ALPHA version of Linux driver for the WaveLan card, designed by NCR, that gives you about 2.5 Kbit/sec link as far as you can beam 1Watt at around 910 MHz. This band is at least for Spread Spectrum operation, which WaveLan is using. This equipemnt can by used w/o FCC licence by the user - but the manufacturer must get certification. Vassili. p.s. Well - you CAN build a backbone using this stuff. Though they are rather expensive - about $700 per card... ------------------------------ From: keith@ksmith.com (Keith Smith) Subject: Re: Don't use Linux?! Date: Wed, 21 Sep 94 22:26:47 GMT In article <35kadv$q3r@rztsun.tu-harburg.de>, Lutz Behnke HiWi wrote: >I would like to bring the good news to John Q Public too. But as long as there is >no WYSIWYG text-system for them they will not by it. And as long MS is the Word Perfect for SCO Unix. You will need an iBCS module for your kernel. I expect to see iBCS standard on future distributions of the 1.2 release kernel, since it works so well. In fact I'm simply amazed by it. Great Job People! There are other Commercial WP's available too. -- Keith Smith Digital Designs keith@ksmith.com 5719 Archer Rd. PO Box 85 Free Usenet News and Internet Mail Services Hope Mills, NC 28348-0085 All 28K/14K Modems (910) 423-4216/7389/7391 Somewhere in the Styx of North Carolina ... 14K-V.32/28K-V.34/28K-V.34 ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Development-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.development) via: Internet: Linux-Development@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Development Digest ****************************** .