From: Digestifier To: Linux-Development@senator-bedfellow.mit.edu Reply-To: Linux-Development@senator-bedfellow.mit.edu Date: Thu, 22 Sep 94 03:13:16 EDT Subject: Linux-Development Digest #204 Linux-Development Digest #204, Volume #2 Thu, 22 Sep 94 03:13:16 EDT Contents: Re: Linux v1.0 SMAIL problem (Drew Sullivan) Building shared libs.. (Pawel Potocki) Re: Looking for a Fax daemon (Robert J. LeBlanc) Re: 1.1.51 Adaptec 1542 SCSI problems (Nick Kralevich) NCR 53C406A SCSI (Pete Cascio) Re: kernel goals (G Dinesh Dutt) Re: SIGFPE with atof() (Bob Kupiec) UltraStor SCSI errors was Re: Future of Ultrastore support (Rod Troch) Re: SIGFPE with atof() (Mitchum DSouza) Re: memory leakage in 1.1.51 ? (Michael_Nelson) Re: memory leakage in 1.1.51 ? (Michael_Nelson) Re: Searching infos on ReadyLink ENET16/U Rev. C Card (Donald Becker) Re: Extending the IP Protocol? (Mike Castle) Installing from a QIC-80 tape? (John Byrns) Re: How to use a host as a router - READ THIS (Axel Philipp) ---------------------------------------------------------------------------- Crossposted-To: comp.os.linux.admin,comp.os.linux.misc,comp.os.linux.prog,dc.org.linux-users From: drew@lethe.north.net (Drew Sullivan) Subject: Re: Linux v1.0 SMAIL problem Date: Tue, 20 Sep 1994 23:50:40 GMT In article , Caesar M Samsi wrote: >What is the latest version os smail and where can I ftp it from ? > >I have 3.1.28.1 #5, Nov 93 and it is broken. It inserts extraneous >linefeeds and tabs making the spool file looking like follows: > >>From root Thu Sep 15 18:08:36 1994 >>Return-Path: >>Received: >> by csamsi_ppp.clark.net >> (Linux Smail3.1.28.1 #5) > >> id m0qlOyp-0004vrC; Thu, 15 Sep 94 18:08 EDT >>Message-Id: > >While Linux's pine (3.89) can read it just fine, other email readers are >confused like hell. But in the /usr/lib/smail/config file, There are blanks (spaces) after all of the backslash characters on the Recieved control lines. Remove the blanks and it works correctly. -- -- Drew Sullivan, -- Toronto, Ontario, Canada MS-DOS --> MicroSoft-Denial Of Service "Intel Inside" isn't advertising. It's a warning! ------------------------------ From: ppotocki@panix.com (Pawel Potocki) Subject: Building shared libs.. Date: 21 Sep 1994 22:54:37 -0400 Hello, My goal is to build several shared, dll libraries for Linux such as 3D graphics libraries (vogl, vogle, Ygl, sipp, plplot) and huge NAG fortan library. I read the documantation included with tools-2.16, looked over the examples, looked over other libraries, and actually already compiled some of the above, but still have some questions, that hopefully someone can answer. First of all, how do I register the load address of the libraries, so there will be no conflict with other people libraries. And how do I get the stop address? Say if the start address is 0x72000000 how do I calculate the stop address? Can I do "size libxx.so.x.x.x" and then add the hex size to the start address and make the stop addres just bit higher then the above sum? Second, I did libinfo on several stubs in the /usr/lib and observed that the Global Offset Table size and Jump Table size are same for most of them (0x1000 and 0x4000). Why is that? Doesn't the size of the library play any role here? Third, well I think that's enough for now. I really be thankfull if someone can answer above questions.. Thank you, -PP ------------------------------ From: rjl@davinci.renaissoft.com (Robert J. LeBlanc) Subject: Re: Looking for a Fax daemon Date: Wed, 21 Sep 1994 02:22:38 GMT gert@greenie.muc.de (Gert Doering) writes: >BUT: mgetty+sendfax is not meant to be used as a network fax sender, that >is, there is no remote spooling mechanism (yet). But then, Efax doesn't >have one either... This was the reason the Qfax utilities for efax were developed. They give an otherwise "single-user" fax program a full-fledged set of fax server features, including remote spooling, e-mail-to-fax gateway, automated PostScript cover page generation, user phonebooks, and so on. You are correct about mgetty+sendfax however--that was an omission that several others pointed out in other posts. However, my interpretation of "fax daemon" as the initial poster described it, seemed only to fit FlexFAX and the efax+Qfax combination due to the lack of spooling with mgetty+sendfax. It should also be noted that mgetty+sendfax requires a Class 2 fax-modem, whereas FlexFAX and efax+Qfax work with both Class 1 and 2 fax-modems. Regards, Rob -- ====================================================================== Robert J. LeBlanc | rjl@renaissoft.com | 1925 Fell Avenue Manager | tel: (604) 985-2013 | North Vancouver, B.C. Information Systems | fax: (604) 980-1077 | V7P 3G6 Renaissoft | * PGP-capable * | Canada ------------------------------ From: nickkral@fornax.EECS.Berkeley.EDU (Nick Kralevich) Subject: Re: 1.1.51 Adaptec 1542 SCSI problems Date: 19 Sep 1994 19:36:35 GMT In article <35ke1k$e6l@news.u.washington.edu>, Erik Olson wrote: >I had similar problems, but I gave the computer a hard reset and it's all gone. >Perhaps you need to start 1.1.51 from scratch for the new scsi driver to >work? I tried doing that. I even tried completely powering down the computer, then starting it up again. It still has the problems. Oh well! Take care, -- Nick Kralevich nickkral@cory.eecs.berkeley.edu -- Nick Kralevich nickkral@cory.eecs.berkeley.edu "A man sits with a pretty girl for an hour and it seems shorter than a minute. But tell that same man to sit on a hot stove for a minute, it is longer than any hour. That's relativity." -- Einstein ------------------------------ From: cascio_p@kant.cs.mci.com (Pete Cascio) Subject: NCR 53C406A SCSI Date: 21 Sep 1994 20:55:52 GMT Reply-To: pete@nuthatch.blackforest.co.us I've got a Media Vision Pro 3D sound card with SCSI-2. The SCSI-2 chip is an NCR 53C406A. It looks like it's probably something new, since it's not mentioned in the SCSI-HOWTO. Does anyone know about this chip? Is it compatible (no changes required) with another supported NCR SCSI chip driver? If not, know where I can get a NCR data sheet on the chip -- so I can patch the nearest NCR driver code? Thanks. -- Pete Cascio Black Forest, Colorado -- "May the forest be with you!" E-mail: pete@nuthatch.blackforest.co.us ------------------------------ From: G Dinesh Dutt Subject: Re: kernel goals Date: 22 Sep 1994 00:10:23 -0400 Reply-To: brat@htilbom.ernet.in |>>>>> jeske@ux4.cso.uiuc.edu (David Jeske) ecrit : >What I want to know is: Is there some plan, or even hope, for the kernel >to get cut up at least enough to allow drivers to be separated from being >"kernel version dependent" at least as much as possible? Does someone >working on the Linux kernel "progress" want to eventually put togeather a >system of loadable drivers? I heard some rumors, that >there were plans to redo the work that the SLS author did and integrate >it into the Linux kernel in a "better" way. Is this happening? ver? > >Or, is the best way for me to see this happen to follow the Linux >VIPER project? Speaking of VIPER, this is not under the purview of that project either. At least, not yet. We are basically interested in providing multi-threading support in the kernel, not making Linux a micro-kernel. Those steps may come later on. I don't know how Mach works, but if it supports dynamically loadable device drivers, then the project of making Linux a Mach server process, may address this issue. Dinesh (for VIPER) ############################################################################### For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken G. Dinesh Dutt, email : brat@htilbom.ernet.in Hinditron Tektronix Instruments Ltd., voice : 8349393/8212262 SDF-2, Unit 63-A, SEEPZ, Andheri (east), Bombay - 400096. ############################################################################### ------------------------------ Crossposted-To: comp.os.linux.help,comp.os.linux.misc From: kupiec@tigger.jvnc.net (Bob Kupiec) Subject: Re: SIGFPE with atof() Date: Wed, 21 Sep 1994 03:13:27 GMT In <35kj62$7no@bosnia.pop.psu.edu>, barr@pop.psu.edu writes: >I'm running Slackware 2.0, and i'm trying to compile a program >called xweather. (You can get the program from ftp.pop.psu.edu, >files /pub/src/xweather.tar.Z and /pub/src/xweather.patch1) > >The code runs fine on a SPARC, under both 4.1.3 and under Solaris. >Friends of mine have it working on other platforms as well. >If I compile it under Linux (running either 1.0.9 or 1.1.51), I >get a SIGFPE at an atof(). The string atof() is reading is a >valid number. I'm using gcc 2.5.8, on a 386 with a 387. > >The funny thing is that it doesn't seem to depend on which number >it's trying to convert to a float, it will bomb after a certain >number of atof()'s are called. I'm having the same problem with atof()! I've been going nuts tring to find the cause! Is it a library bug, or what? Linux 1.0.8, libc.so.4.5.24, gcc 2.5.8, 486DX40. Here's the snippet of code that's causing it. (This works on SunOS 4.1.3) double getElement(gstr,gstart,gstop) int gstart, gstop; char gstr[80]; { int k, glength; char gestr[80]; glength = gstop - gstart + 1; for (k = 0; k <= glength; k++) gestr[k] = gstr[gstart+k-1]; gestr[glength] = '\0'; return(atof(gestr)); } -- Bob Kupiec (N3MML) Phone: 1-609-897-7319 JvNCnet (GES, Inc.) Network Operations -or- : 1-800-35-TIGER 3 Independence Way Email: kupiec@jvnc.net Fax : 1-609-897-7310 Princeton, NJ 08540 ------------------------------ From: troch@lonestar.texas.com (Rod Troch) Subject: UltraStor SCSI errors was Re: Future of Ultrastore support Date: 21 Sep 1994 03:14:31 GMT >>>>> "Robert" == Robert Ashcroft writes: Robert> Having just bought a (cheap) Ultrastore 34F I was a Robert> little dismayed to hear that it may not be able to Robert> take advantage of some of the advances in the SCSI Robert> speedups in recent kernels. Something called SCSI Robert> clustering speed up or something. Robert> Can anyone explain what this is? Do the device Robert> drivers need to be rewritten for the Ultrastores? How Robert> likely is this to happen? I have been having the worst of luck with an UltraStor 24F EISA SCSI controller that I have at my office. Under MSDOS all seems well. I was able to access different SCSI drives, do low level formats, etc. Under Linux, using the UltraStor 1.11 alpha driver, things are much different. Usually I load a boot floppy, the driver loads, it sniffs out my SCSI disk, recognizes the partitions then a few seconds later the kernel seems to dead-lock with a "SCSI host 0 timed out" error. Any clues as to what this might be? Does a newer driver exist for the 24F? Thanks a million, Rod -- =========== If you yell try : Rod Troch | Zeta Beta Tau internet : troch@lonestar.texas.com | Roll Tide Roll!! : | happyHappy joyJoy Don't mess with TEXAS. (Lonestar - A Linux box) ------------------------------ From: Mitchum.DSouza@mrc-apu.cam.ac.uk (Mitchum DSouza) Subject: Re: SIGFPE with atof() Date: 20 Sep 1994 09:30:06 GMT In article <35kj62$7no@bosnia.pop.psu.edu>, barr@pop.psu.edu (David Barr) writes: |> I'm running Slackware 2.0, and i'm trying to compile a program |> called xweather. (You can get the program from ftp.pop.psu.edu, |> files /pub/src/xweather.tar.Z and /pub/src/xweather.patch1) |> |> The code runs fine on a SPARC, under both 4.1.3 and under Solaris. |> Friends of mine have it working on other platforms as well. |> If I compile it under Linux (running either 1.0.9 or 1.1.51), I |> get a SIGFPE at an atof(). The string atof() is reading is a |> valid number. I'm using gcc 2.5.8, on a 386 with a 387. |> |> The funny thing is that it doesn't seem to depend on which number |> it's trying to convert to a float, it will bomb after a certain |> number of atof()'s are called. Try linking with -lieee. BTW: Next time can you mention what version of the C libraries you are using. A "ldconfig -p" will suffice. |> While I'm at it, when I compile it, I end up with a static binary. |> I have the shared X libs loaded as well as the static ones. Why |> isn't a shared binary being built? Probably because the link line had a "-g" in it somewhere. Take out the "-g"'s from the Makefile and relink. The "-g" tells GCC to produce ginormous binaries for fun. Mitch ------------------------------ From: nelson@seahunt.imat.com (Michael_Nelson) Subject: Re: memory leakage in 1.1.51 ? Date: 21 Sep 1994 20:21:40 GMT Reply-To: nelson@seahunt.imat.com Guenther Thomsen (thomsen@cs.tu-berlin.de) wrote: -> it seems, there is an memory leakage (at least) in linux-1.1.51 : if I -> run two processes wich use (permanent) together more memory than my -> machine gots as RAM, the machine is continiously swapping - ok. But -> over the time the swap-space which is needed grows, without -> increasing memory requirements of the two processes or any other ! -> This grow is (very) slowly (about 1Mb / hour ) but unstoppable - -> anytime all the swap-space will be needed and the response time of the -> machine becomes unreasonable slow ! -> If the processes terminates, they give back their and the mysterious -> used swap space. So there is no problem with sufficient swap space and -> short duration processes. -> My machine: -> Linux 1.1.51 -> 80386dx20MHz,ISA,8Mb RAM -> 10 or 23 Mb swap space -> Processes to test: -> 2*gnuchessx started from xboard, each uses about 7.6 Mb -> virtuell memory ('size'). -> other processes running: -> X (2.0) -> fvwm -> xterm -> top / free Under the conditions you outlined, after running for about 2 minutes, my system was using over 18 megabytes of swap. When I first opened the two incidences of xboard, it wasn't using ANY swap. Looks like a problem, allright... -- Michael Nelson nelson@seahunt.imat.com San Francisco, CA FAX: 1-415-621-2608 ------------------------------ From: nelson@seahunt.imat.com (Michael_Nelson) Subject: Re: memory leakage in 1.1.51 ? Date: 21 Sep 1994 20:35:04 GMT Reply-To: nelson@seahunt.imat.com Michael_Nelson (nelson@seahunt.imat.com) wrote: -> Under the conditions you outlined, after running for about 2 minutes, -> my system was using over 18 megabytes of swap. When I first opened the two -> incidences of xboard, it wasn't using ANY swap. -> Looks like a problem, allright... ...but it doesn't seem to be specific to 1.51. It does the same here with 1.50. -- Michael Nelson nelson@seahunt.imat.com San Francisco, CA FAX: 1-415-621-2608 ------------------------------ From: becker@cesdis.gsfc.nasa.gov (Donald Becker) Crossposted-To: comp.os.386bsd.development,comp.os.linux.admin,comp.os.linux.misc,comp.protocols.nfs,comp.sys.ibm.pc.hardware,convoy.hardware,local.pinboard,paderborn.pinboard,zer.z-netz.fundgrube.suche.elektronik Subject: Re: Searching infos on ReadyLink ENET16/U Rev. C Card Date: 21 Sep 1994 16:16:41 -0400 In article <5WeiNGNTpsB@higgins.delbox.zer.de>, wrote: >Frank Westheider Linux Support Group Paderborn >I'm looking for infos on the ReadLINK ENET16/U Rev. C Ethernet-Card. >This card can be jumpered for WD80x3 and NEx000 mode and has a lot of >jumpers on board : ... >Whatever setting i choose (WD oder NE), whatever IRQ/IO i choose, the card >is recognized but > > - in NE-Mode the card hangs together with HD-Access CRASH This is likely a I/O address conflict. What kind of disk controller are you using? What address are the cards jumpered to? Remember that the NE2000 takes 32 I/O locations. > - in WD-Mode, all works fine, but the cards (2 of this kind) don't > recognize one another on the NET Are there any Tx or Rx errors reported in /proc/net/dev? What about error messages logged in /usr/adm/messages? -- Donald Becker becker@cesdis.gsfc.nasa.gov USRA-CESDIS, Center of Excellence in Space Data and Information Sciences. Code 930.5, Goddard Space Flight Center, Greenbelt, MD. 20771 301-286-0882 http://cesdis.gsfc.nasa.gov/pub/people/becker/whoiam.html ------------------------------ Crossposted-To: comp.protocols.tcp-ip From: mcastle@umr.edu (Mike Castle) Subject: Re: Extending the IP Protocol? Date: Wed, 21 Sep 1994 18:09:09 GMT In article <35kjmt$8j7@mark.ucdavis.edu>, Sam Oscar Lantinga wrote: > ... I've gotten proxy arp working, but routing is still a >problem, hence the need for the IPOPT_RELAY extension... ? >Is there any way to force non-specific IP packets along a certain >route? Or to broadcast routing information telling the routers that >one particular machine on the subnet can be reached through an >entirely different network? Routing Information Protocol (RIP), External Gateway Protocol (EGP) or Border Gateway Protocol (BGP) might be what you need. Check out the Network Admin Guide in section 2.4.4 for more info, and prolly the gated documentation as well. -- Mike Castle .-=NEXUS=-. Life is like a clock: You can work constantly mcastle@cs.umr.edu and be right all the time, or not work at all mcastle@umr.edu and be right at least twice a day. -- mrc We are all of us living in the shadow of Manhattan. -- Watchmen ------------------------------ From: jbyrns@ic.sunysb.edu (John Byrns) Subject: Installing from a QIC-80 tape? Date: 21 Sep 1994 19:58:14 GMT I am trying to upgrade my Linux from an old SLS to Slackware, I now have a Colorado 250mb tape drive and would like to install from it. I was going to copy all install files to a DOS partition, then use a DOS program to back it up to tape. Can I then use this tape to install from? Thanks John Byrns jbyrns@ic.sunysb.edu ------------------------------ From: philipp@uni-paderborn.de (Axel Philipp) Crossposted-To: comp.os.linux.misc,comp.os.linux.admin,alt.uu.comp.os.linux.questions Subject: Re: How to use a host as a router - READ THIS Date: 22 Sep 1994 06:46:20 GMT David - Morris (dwm@shell.portal.com) wrote: : Re. why not 127.0.0.0 instead of 127.0.0.1 -- the destination address must : be a 'host' address and the host address can't be zero (0). No, the destination address must not always be a 'host'. If you make a 'nestat -rn' for example, you will not find as many 'host' routes as 'network' routes. 'host' routes have the 'H' flag set wheras 'network' routes have the 'G' flag set. Therefore there could conceptually be a network with number 127.0.0.0. But this number is per definitionem reserved for local connections on your computer. I.e the kernel can use the same addressing scheme for local connections (remember the 'localhost' entry in /etc/hosts), as it would use for external connections. Axel Philipp -- =================================================================== Axel Philipp Universitaet-GH Paderborn Email : axel@ktpsp3.uni-paderborn.de Rechnerbetreuung KTP P15.13 Phone : +49 5251 60 3814 Pohlweg 33098 Paderborn, Germany =================================================================== ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Development-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.development) via: Internet: Linux-Development@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Development Digest ****************************** .