From: Digestifier To: Linux-Development@senator-bedfellow.mit.edu Reply-To: Linux-Development@senator-bedfellow.mit.edu Date: Tue, 6 Sep 94 08:13:06 EDT Subject: Linux-Development Digest #128 Linux-Development Digest #128, Volume #2 Tue, 6 Sep 94 08:13:06 EDT Contents: Re: DOSEMU 0.53pl17 and keyboard (Pekka J Taipale) cat /proc/interrupts doesn't show printer ints. (andrei@labomath.univ-orleans.fr) Re: WARNING about shadow-mk package (Joe Zbiciak) Re: Future of linux -- the sequel (Conrad Steenberg) BUG SCSI 1.1.37 to 1.1.49 more info. (BARRY TITMARSH) Re: WARNING about shadow-mk package (Patrick Reijnen) Re: WARNING about shadow-mk package (Patrick Reijnen) Re: Any interest for DCF77 clock code? (David Kastrup) Re: Future of linux -- the sequel (Shannon Hendrix) Re: Kernel change summary 1.1.45 -> 1.1.46 (John McClary Prevost) Re: Fortran Compiler for Linux?? (Sakari Mattila) Looking for term2.x applications (Andrew Davison) Re: Netware Client (Volker Lendecke 29121346) Adaptec 2742AT (Bernd Bartmann) ---------------------------------------------------------------------------- From: pjt@snakemail.hut.fi (Pekka J Taipale) Subject: Re: DOSEMU 0.53pl17 and keyboard Date: 06 Sep 1994 06:52:01 GMT In article <34g893$s2v@flood.xnet.com> genanr@amiserv.xnet.com (Andrew Ryan) writes: > I can't get DOSEMU 0.53pl17 to work right. After dos 6.2 boots and >I get the date prompt my keyboard is all screwed up. I have linux 1.1.49. >Does anyone else have this problem? Is there a fix? I had a similar problem, until I changed rawkeyboard to on in /etc/dosemu.conf. Odd enough. One would think that having rawkeyboard off would give less problems, but not so. Of course, you might have another problem... -- Pekka.Taipale@hut.fi ------------------------------ From: andrei@labomath.univ-orleans.fr Subject: cat /proc/interrupts doesn't show printer ints. Date: 6 Sep 1994 02:10:53 -0500 Hello All, The Subject says it all. I am *almost* sure my printer uses INT7, as I set it by tunelp, and it works, and if I set it to another value, it doesn't. Kernel version is 1.1.49. Could someone hint if one can do something to make the printer interrrupts counter displayable? Many thanks, Andrew Yakovlev. ------------------------------ From: im14u2c@cegt201.bradley.edu (Joe Zbiciak) Crossposted-To: comp.os.linux.admin,comp.os.linux.help,comp.os.linux.misc Subject: Re: WARNING about shadow-mk package Date: 6 Sep 1994 02:10:30 -0500 =====BEGIN PGP SIGNED MESSAGE===== This post is in regards to the login.secure program included in the shadow-mk package authored by Mohan Kokal. I, Joseph R.M. Zbiciak, am the sole author of this program, and would like to dispell any rumors labeling it as the tool of a "cracker." Included in this post is the source code for my /bin/login replacement. The binary included in the shadow-mk package distributed by Mohan Kokal was apparently compiled under GCC 2.4.5, using libc 4.4.4. I base this statement on the fact that the binary was indeed compiled by me on my personal Linux box, "asylum," prior to June 9th. On June 9th, I upgraded to GCC 2.5.8, and libc 4.5.26. Inspection of the login.secure binary will reveal that it was indeed linked with libc 4.4.4. Therefore, I seek corroboration of the following, since I cannot do this myself (my system has no room to dl libc 4.4.4 and gcc 2.4.5 to try this): The login.secure binary was most probably compiled as follows: gcc -o login.secure -s -N -O6 -fomit-frame-pointer -m386 login1.c (as I said, under GCC 2.4.5, and libc 4.4.4) Using GCC 2.5.8 and libc 4.5.26 yeilds an executable of 1328 bytes with these options. Let me remind you that the /bin/login on my system has been and continues to be the login.secure binary that was included in shadow-mk. (Size: 1124 bytes. CRC: a4abbb26) I have PGP-signed this post to ensure its authenticity. My public key is available via finger. Please finger im14u2c@cegt201.bradley.edu. Pipe the output to a file and run pgp -ka on the file to add the key to your keyring. This key is primarily for private messages. I do not yet have a well established key for business use. One will be forthcoming. Please: I urge *ANYONE* that has any questions, problems, etc. relating this program to CONTACT ME IMMEDIATELY. My email address is, once again, im14u2c@cegt201.bradley.edu. Should that address fail, there's also im14u2c@camelot.bradley.edu. Should both of those addresses fail for one reason or another, email Mohan Kokal at magnus@cegt201.bradley.edu, with instructions to forward the mail to me. And again: I do apologize for any inconvenience this may have caused anyone. The shadow-mk package is not insecure. The login.secure is indeed what it was titled. I do hope that this post lays to rest any suspicion about the shadow-mk package, its contents, and its author. I also apologize to Mohan Kokal for not realizing that such a small piece of code would cause such a large number of people to label him as a cheap-and-dirty cracker. Here's the source code: ==FILE: login1.c== /* Preprocessor for /bin/login */ /* Corrects /bin/login security hole regarding -f */ /* Also disables -h for non-root users. */ /* (c) 1994, Joseph R. M. Zbiciak */ #include #include #include main (int argc, char * argv[], char * envp[]) { char **av=argv; int ac=argc; if (argc>1) { while(--ac>0) { if (**(++av)=='-' && strlen(*av)>1) { *((*av)+2)=0; if (*((*av)+1)=='h' && getuid()>100) { fprintf(stderr,"You cannot specify a new host.\n"); exit (1); } } } } execve("/bin/_login",argv,envp); return 0; } ==END OF FILE== - --Joseph R.M. Zbiciak Systems Administrator & Programmer Texas Networking Systems, Inc. DISCLAIMER: Neither this post, nor any other post made by me, reflects the opinions of my various employers, unless EXPLICITLY stated. All opinions stated herein are mine unless otherwise noted. := Joe Zbiciak == im14u2c@ =: :- - cegt201.bradley.edu - -: If it works, Don't fix it. : - camelot.bradley.edu - : :-Finger for PGP Public Key-: :===========================: =====BEGIN PGP SIGNATURE===== Version: 2.3a iQCVAgUBLmwUH/1glWhKqKRRAQHCAgP6AqTd3G9kzRm12GqiE29aL1VHjkYxb/hU FW4F0+TEIM7RbUcbfFPilwtnb2n08btgcLW+92YZRGf4FmzteVLEMhecz/+wB9Wd /Dr8rH5rUrJw2Lclx7ZmiLDLfBVHLahcRNQ/oH/itLg9UJXLzLKq8igEniIpyxgW LevHNAnbWgM= =VIIl =====END PGP SIGNATURE===== ------------------------------ From: conrad@fskcds.puk.ac.za (Conrad Steenberg) Subject: Re: Future of linux -- the sequel Date: 6 Sep 1994 07:15:04 GMT Rob Janssen (rob@pe1chl.ampr.org) wrote: : In <34el3j$hsp@gazette.engr.sgi.com> erik@westworld.esd.sgi.com (Erik Fortune) writes: : >In article , rob@pe1chl.ampr.org writes: {LOTS of stuff deleted...} : However, this is not what the thread is all about. The point is that the : original statement that an Indy makes a Pentium feel like a 4.77MHz XT : was a gross exaggeration, and that still stands. The memo only shows that {snip...} : Rob One of the original poster's questions is seemingly completely ignored, even though it is much more relevant than whether chip X or system Y is faster/ cheaper than a Pentuim at Z MHz, so let me ask that question: WHY is no one even CONSIDERING doing a multiprocessor kernel for Linux? It doesn't matter which multiprocessor board, but the fact is that there are multiprocessor 486 and Pentium motherboards out there... they are even affordable (of all things ;-). OS/2 from IBM comes with a multiprocessing kernel (SMP no less...) so it is not impossible, even though it may be hard on a few programmers' sleep. I think this should be considered an essential next step in the development of a free, high performance OS that runs on just about any PC hardware (i.e. Linux) One could probably go on like this for ages, but it probably comes down to the fact that the guys doing the slick programming doesn't have the slick hardware.... Maybe someone should volunteer sending a multiprocessor board off to Australia to tempt a certain higly respected kernel programmer! Cheers Conrad ______________________________________________________________________________ |Conrad Steenberg | Space Research Unit | Eenheid vir Ruimtenavorsing | | | Potchefstroom | Potchefstroomse | | 99-2424 | University for CHE | Universiteit vir CHO | ______________________________________________________________________________ |"Hou hierdie spasie dop... | | goed gaan maar weer voort." | |"This will probably be modified as soon as someone comes up with something | | witty worthwile repeating in the presence of a lady" | _____________________________________________________________________________| conrad@fskcds.puk.ac.za (fiscds@pukrs1.puk.ac.za, fiscds@pukrs6.puk.ac.za) ------------------------------ Date: Tue, 6 Sep 1994 08:57:38 EST From: BARRY TITMARSH Subject: BUG SCSI 1.1.37 to 1.1.49 more info. I have tested all kernels 1.1.36 to 1.1.49 last night. on platform slackware 2.00 seems aha1542 stopped working with 1.1.36. ?? however with libs ....24 it did work Ok sortof.? Idears. 1.1.37 kernel: Kernel logging (proc) started. kernel: 16384 bytes for swap cache allocated kernel: Console: colour EGA+ 100x40, 8 virtual consoles kernel: Serial driver version 4.00 with no serial options enabled kernel: tty00 at 0x03f8 (irq = 4) is a 16450 kernel: tty01 at 0x02f8 (irq = 3) is a 16450 kernel: lp_init: lp1 exists, using polling driver kernel: lp_init: lp2 exists, using polling driver kernel: Microsoft BusMouse detected and installed. kernel: tpqic02: IRQ 5, DMA 1, IO 0x300, IFC Archive, $Revision: 0.4.1.4 $ kernel: tpqic02: Settings: IRQ 5, DMA 1, IO 0x300, IFC Archive kernel: tpqic02: waiting looong in rdstatus() -- drive dead? kernel: tpqic02: finished waiting in rdstatus() kernel: tpqic02: tp_sense: status: 81d0, error count: 0, underruns: 0 kernel: tpqic02: DMA buffers: 20 blocks, at address 0x1ac200 (0x1ac018) kernel: tpqic02: tp_sense: status: 81d0, error count: 0, underruns: 0 kernel: Calibrating delay loop.. ok - 6.60 BogoMips kernel: Configuring Adaptec at IO:330, IRQ 11, DMA priority 5 kernel: scsi0 : Adaptec 1542 kernel: scsi : 1 hosts. kernel: Vendor: SyQuest Model: SQ5110 Rev: CHC kernel: Type: Direct-Access ANSI SCSI revision: 0 kernel: Detected scsi disk sda at scsi0, id 3, lun 0 kernel: Vendor: NEC Model: CD-ROM DRIVE:841 Rev: 1.0 kernel: Type: CD-ROM ANSI SCSI revision: 0 kernel: Detected scsi CD-ROM sr1 at scsi0, id 4, lun 0 kernel: Vendor: LMS Model: CM214 Rev: 0.12 kernel: Type: CD-ROM ANSI SCSI revision: 0 kernel: Detected scsi CD-ROM sr2 at scsi0, id 5, lun 0 kernel: scsi : detected 2 SCSI cdroms 1 SCSI disk total. kernel: Scd sectorsize = 2048 bytes kernel: Scd sectorsize = 2048 bytes kernel: Memory: 14912k/16384k available (592k kernel code, 384k reserved, kernel: Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M kernel: Swansea University Computer Society NET3.016 kernel: NET3 TCP/IP protocols stack v016 kernel: IP Protocols: ICMP, UDP, TCP kernel: SLIP: version 0.7.5-NET3.014-NEWTTY (4 channels) kernel: CSLIP: code copyright 1989 Regents of the University of Californi a kernel: eth0: WD80x3 at 0x280, 00 00 C0 02 BA 6A assigning address 0xd00 0 kernel: wd.c:v0.99-14 11/21/93 Donald Becker (becker@super.org) kernel: Checking 386/387 coupling... Ok, fpu using irq13 error reporting. kernel: Linux version 1.1.37 (root@dc0hk-sys2) #3 Mon Sep 5 22:25:36 MET D kernel: Partition check: kernel: sda: sda1 kernel: hda: multiple mode not supported kernel: hda: hda1 hda2 hda3 hda4 kernel: hdb: multiple mode not supported kernel: hdb: hdb1 hdb2 hdb3 kernel: VFS: Mounted root (ext2 filesystem) readonly. kernel: Adding Swap: 29576k swap-space named 54â: Ready to answer queries. named 54â: sysquery: query() contains our address (dc0hk-sys2.ampr.org:44 . login: ROOT LOGIN ON tty1 kernel: SCSI host 0 timed out - aborting command last message repeated 3 times kernel: SCSI host 0 abort() timed out - reseting kernel: Sent BUS DEVICE RESET to target 3 kernel: Sending DID_RESET for target 3 and now 1.1.39 syslogd: restart named 53â: starting. named 4.9.3-BETA9 Sun Sep 4 14:10:48 MET DST 1994 kernel: Kernel logging (proc) started. kernel: 16384 bytes for swap cache allocated kernel: Console: colour EGA+ 100x40, 8 virtual consoles kernel: Serial driver version 4.00 with no serial options enabled kernel: tty00 at 0x03f8 (irq = 4) is a 16450 kernel: tty01 at 0x02f8 (irq = 3) is a 16450 kernel: lp_init: lp1 exists, using polling driver kernel: lp_init: lp2 exists, using polling driver kernel: Microsoft BusMouse detected and installed. kernel: tpqic02: IRQ 5, DMA 1, IO 0x300, IFC Archive, $Revision: 0.4.1.4 kernel: tpqic02: Settings: IRQ 5, DMA 1, IO 0x300, IFC Archive kernel: tpqic02: waiting looong in rdstatus() -- drive dead? kernel: tpqic02: finished waiting in rdstatus() kernel: tpqic02: tp_sense: status: 81d0, error count: 0, underruns: 0 kernel: tpqic02: DMA buffers: 20 blocks, at address 0x1ad200 (0x1ad0d0) kernel: tpqic02: tp_sense: status: 81d0, error count: 0, underruns: 0 kernel: Calibrating delay loop.. ok - 6.60 BogoMips kernel: Checking 'hlt' ... ok kernel: Configuring Adaptec at IO:330, IRQ 11, DMA priority 5 kernel: scsi0 : Adaptec 1542 kernel: scsi : 1 hosts. kernel: Vendor: SyQuest Model: SQ5110 Rev: CHC kernel: Type: Direct-Access ANSI SCSI revision: kernel: Detected scsi disk sda at scsi0, id 3, lun 0 kernel: Vendor: NEC Model: CD-ROM DRIVE:841 Rev: 1.0 kernel: Type: CD-ROM ANSI SCSI revision: kernel: Detected scsi CD-ROM sr1 at scsi0, id 4, lun 0 kernel: Vendor: LMS Model: CM214 Rev: 0.12 kernel: Type: CD-ROM ANSI SCSI revision: kernel: Detected scsi CD-ROM sr2 at scsi0, id 5, lun 0 kernel: scsi : detected 2 SCSI cdroms 1 SCSI disk total. kernel: Scd sectorsize = 2048 bytes kernel: Scd sectorsize = 2048 bytes kernel: Memory: 14908k/16384k available (596k kernel code, 384k reserved kernel: Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M kernel: Swansea University Computer Society NET3.016 kernel: NET3 TCP/IP protocols stack v016 kernel: IP Protocols: ICMP, UDP, TCP kernel: SLIP: version 0.7.5-NET3.014-NEWTTY (4 channels) kernel: CSLIP: code copyright 1989 Regents of the University of Californ kernel: eth0: WD80x3 at 0x280, 00 00 C0 02 BA 6A assigning address 0xd0 kernel: wd.c:v0.99-14 11/21/93 Donald Becker (becker@super.org) kernel: Checking 386/387 coupling... Ok, fpu using irq13 error reporting kernel: Linux version 1.1.39 (root@dc0hk-sys2) (gcc version 2.5.8) #1 Mo kernel: Partition check: kernel: sda: sda1 kernel: hda: identity unknown kernel: hda: hda1 hda2 hda3 hda4 kernel: hdb: identity unknown kernel: hdb: hdb1 hdb2 hdb3 kernel: VFS: Mounted root (ext2 filesystem) readonly. kernel: Adding Swap: 29576k swap-space named 54â: Ready to answer queries. named 54â: sysquery: query() contains our address (dc0hk-sys2.ampr.org:4 login: ROOT LOGIN ON tty1 kernel: scsi : aborting command due to timeout : pid 26, scsi0, id 4, lun 0 Read Capacity 00 00 00 00 00 00 00 00 00 kernel: scsi : aborting command due to timeout : pid 31, scsi0, id 3, lun 0 Test Unit Ready 00 00 00 00 00 kernel: scsi : aborting command due to timeout : pid 31, scsi0, id 3, lun 0 Test Unit Ready 00 00 00 00 00 kernel: SCSI host 0 abort() timed out - reseting kernel: Sent BUS DEVICE RESET to target 3 kernel: Sending DID_RESET for target 3 the only version that functions correctly is 1.1.36 i have tested all kernels last night from 1.1.36 to 1.1.49 and this bug is a fixed constant in its faults from 1.1.37 to 1.1.49 however this fault is not seen when i used libc-...24 im now useing libc....26 if that helps. Barry.. ------------------------------ From: patrickr@cs.kun.nl (Patrick Reijnen) Subject: Re: WARNING about shadow-mk package Date: Tue, 6 Sep 1994 06:47:34 GMT In <34gcci$l7q@stratus.skypoint.com> gaj@skypoint.com () writes: >Larry Doolittle (doolitt@recycle.cebaf.gov) wrote: >: Bauke Jan Douma (bjdouma@xs4all.nl) wrote: >: : If you are about to update you shadow programs with the shadow-mk >: : package by Mohan Kokal, think again. >: : Here's the snippet from the Makefile in that package where login is >: : installed: >: : install -m4755 login $(LOGINDIR)/_login >: : install -m4711 login.secure $(LOGINDIR)/login >: : -rws--x--x 1 root staff 1124 Jul 13 10:36 login.secure <- ? >: If Mohan is the cracker you suggest, what he would hate the most >: would be publishing the login.secure program. >: If Mohan is innocent, the fastest way to clear his neame would be >: to publish the login.secure program. >: Either way, I suggest you uuencode login.secure (if it's not an >: ASCII shell script :-) and post it to these newsgroups. A lot >: of people here are competent with unassemblers. >: - Larry Doolittle doolittle@cebaf.gov >Grand suggestion, Mr. Doolittle! I second the motion. Lets get a look >at this code & find out just exactly what is going on here, if anything. >: : bjdouma@xs4all.nl (Bauke Jan Douma) On comp.os.linux.admin the source code of login.secure was promised to be posted, so there is no more reaseon for blaming people and warnings against using shadow-mk. In the article in there it is also described what login.secure exactly does, so anyone should be happy now :-) Patrick Reijnen -- ************************* Patrick Reijnen ************************* * Department of Computer Science, Catholic University of Nijmegen * * Email: patrickr@{sci,cs}.kun.nl * * WWW: http://{atlas,zeus}.cs.kun.nl:4080/homepage.html * ------------------------------ From: patrickr@cs.kun.nl (Patrick Reijnen) Subject: Re: WARNING about shadow-mk package Date: Tue, 6 Sep 1994 06:48:26 GMT In jseng@news.eecs.nwu.edu (John S. Seng) writes: NO MORE REASON to look at a binary. The source code will become available. >Well you guys can take a look at it here: >begin 711 login.secure >M!P%D`,@#``!X````"`````````````````````````#H?P(``+@M````NP`` >M``#-@*-<"PE@BT0D"*,T"PE@#[<%V`,``%#H0`,``(/$!.A0````4.B6`P!@ >M6[@!````S8#K]Y"0D)"0D)"0D)"0D`````!9;W4@8V%N;F]T('-P96-I9GD@ >M82!N97<@:&]S="X*`"]B:6XO7VQO9VEN``````!5B>6#[`175E.+70CH`P$` >M`(MU#(/[`7YM`78PQD("`(L&@'@!:'4DZ`,&`&!F@_AD=AEH5````&C4!PE@Z)X#`&!J`>C? >M`@!@D)"02X7;?ZN+11!0BT4,4&AT````Z+4"`&`QP(UE\%M>7XGL7<,`4XL5 >M0`0``(/Z_W49,=*#/40$````=`ZX1`0``(/`!$*#.`!U]XG0AM``"0D(L#_]"#P_R!^T`$``!U\5O#``````````````!3NQ`$``"#/1`$```` >M=`V0BP.#PP3_T(,[`'7T:!@!``#H"@``8(/$!%O#``````"#/=`#````=0_' >M!=`#```!````Z+C____#````4[@!````BUPD",V`AM_UO#``!3N%8```"+7"0(S8"%P'T,]]BCX`,``+C_____6\,``%.X!````(M< >M)`B+3"0,BU0D$,V`AM`(M<)`B+3"0,S8"%P'T,]]BCX`,``+C_____6\,O;&EB+VQD+G-O`#H@8V%N >M)W0@;&]A9"!D>6YA;6EC(&QI;FMEM`(/L.%=64XMT)$B+7"1,@ST$!`````^$LP```,=$)$`@`/!B:$8"``#H(___ >M_X/$!(7`=%R+`XU\)!2^40(``/RY"@```/.E9J6%P'0=@#@`=`B0D$"`.`!U >M^BL#4(L;4VH"Z`G___^#Q`QJ*HU$)!A0:@+H^/[__X/$#)!H@````.BJ_O__ >M@\0$Z_&0D)"0D&@8!```:/P#``"+3"1848L;4XU$)!Q0N`(```"%]G\%N`$` >M``!0BT0D6/_0BTPD*%&+3"0H4>C5_O__@\0@A?9_#I"0:@#H5?[__X/$!.OT >M6UY?@\0XPP"#[`1FBU0D"&:%TG4%NG(3``#9?"0"9HM$)`)F)<#P9HE$)`*) >MT&8E/P]FBU0D`F8)T&:)1"0"V6PD`H/$!,,`;&EB8RYS;RXT`$1,3"!*=6UP >M(#0N-'!L-````-,>Z_[4`P``````````````````````````````````K`,` >M`+8#``````!@E`$$``#P"&`"````Q`,``.@#`````````0```/@_`&`````` >L`P```,@#```T!```^`,```````````````````````````````````0````` >` >end Patrick Reijnen -- ************************* Patrick Reijnen ************************* * Department of Computer Science, Catholic University of Nijmegen * * Email: patrickr@{sci,cs}.kun.nl * * WWW: http://{atlas,zeus}.cs.kun.nl:4080/homepage.html * ------------------------------ From: dak@rama.informatik.rwth-aachen.de (David Kastrup) Subject: Re: Any interest for DCF77 clock code? Date: 6 Sep 1994 07:57:32 GMT hm@ix.de (Harald Milz) writes: >In comp.os.linux.development, Rob Janssen (rob@pe1chl.ampr.org) wrote: >> When I want to sync only a single machine from my clock (which already >> is interfaced to the RS232), can I configure xntp to leave out all the >> network stuff? I don't need another large daemon in my 16M system... >No, you need IP up and running. xntp handles the receivers as pseudo- >hosts with addresses in the range 127.*.*.*. The daemon is not _that_ >large. The good news is that you can configure a single xntpd to handle >both local receivers and remote NTP servers which is good to have >backups in vital environments. >> How difficult is it to configure this? (I have been on the newsgroup >> for a while and I see a lot of problem discussion that extends way beyond >> what I want to do...) >Quite easy if you can read ;^) So I can't. Sue me. I am still trying to get the xntp3p3 source distribution to run. Main problem currently: Linux kernel includes a kernel PLL which can be properly adjusted (much superior to usual adjtime behaviour). The kernel PLL code in the distrib (I think MCC 1.0+), however, calls *system* calls of the SUN, only. So I will have to tweak sources quite a bit to get optimal behaviour. -- David Kastrup dak@pool.informatik.rwth-aachen.de Tel: +49-241-72419 Fax: +49-241-79502 Goethestr. 20, D-52064 Aachen ------------------------------ From: shendrix@escape.widomaker.com (Shannon Hendrix) Subject: Re: Future of linux -- the sequel Date: Mon, 5 Sep 1994 17:55:21 GMT pyeatt@cervesa.cs.colostate.edu (Larry Pyeatt) writes: >In article <348vsp$68c@cesdis1.gsfc.nasa.gov>, becker@cesdis.gsfc.nasa.gov (Donald Becker) writes: >|> >|> That's just way more than a reasonable Linux box will cost. >Define "reasonable." I defined reasonable to be "something similar to >SGI Indy. You can't get that sort of performance with cheap parts. Yes you can. The point was that the prices for the individual parts listed in the Pentium system were far more than what they actually cost. The $6400 Pentium listed would be more like $2700 to anyone that knows where to look and I don't mean getting low-quality either. >If I wanted to do any floating point, I would also want the SGI, since >it puts Pentium to shame. Which brings us back to my main point, which >is that a Linux system with a non-Intel processor would be a "good thing." Sure, that would be great. But it will still be awhile before you will get more bang for the buck from a non-Intel system. -- csh =========================================================================== shendrix@escape.widomaker.com | Linux and BSD ------------------------------ From: visigoth@olivier.dementia.org (John McClary Prevost) Subject: Re: Kernel change summary 1.1.45 -> 1.1.46 Date: 06 Sep 1994 08:16:20 GMT In article <344hma$4de@vishnu.jussieu.fr> card@masi.ibp.fr (Remy CARD) writes: {...} ] I seem to remember reading that under BSD the immutable ] files can only be modified in single-user mode. Is it necessary to be in ] single-user to remove the immutable attribute as mentioned above? I think ] this would probably be a good idea. Thoughts? In 4.4BSD, immutable and append-only flags can only be set and cleared in single-user mode. It should be easy to make it work the same way in Linux: add a system call which specifies the run-level and modify init to call it when going into single user mode or multi user mode. The problem is that Linux has many versions of init floatting around and such a solution would require that everybody upgrades his init program. In the current Linux implementation, only root can change the immutable and append-only attribute on a file, in single user mode and in multi user mode. Hmm. Doesn't this decrease the usefulness of the append-only and immutable bits? As I understood it, the rational for adding these attributes was to make it harder for would-be system crackers to do serious damage or remove traces of their work. (i.e., they break in, hack root, try to remove entries from /var/adm/syslog, and discover that they have to be in single user mode to do anything except append to it.) In any case, bravo on the new addition. :) @-`-,-- John McClary Prevost Systems Programmer, CS Facilities, Carnegie Mellon University -- @-`-,-- John McClary Prevost Systems Programmer, CS Facilities, Carnegie Mellon University ------------------------------ From: smattila@metz.une.edu.au (Sakari Mattila) Crossposted-To: alt.os.linux,comp.os.linux.help,comp.os.linux.misc Subject: Re: Fortran Compiler for Linux?? Date: 6 Sep 94 07:32:59 GMT Is there any full Ada(tm) compilers for Linux ? Some Ada subset compiler is on PrimeTime CDROM. Sakari Mattila smattila@metz.une.edu.au VK2XIN, OH2AZG (Cis: 71307,1525) P.O.Box u13 tel. +61 67 733752 -------------------------------- Armidale NSW 2351 --------------------------- =================== ------------------------------ From: davison@bruce.cs.monash.edu.au (Andrew Davison) Crossposted-To: comp.os.linux.misc Subject: Looking for term2.x applications Date: 6 Sep 1994 08:01:34 GMT Perhaps I'm missing something important, but has anyone compiled any of the major applications (Mosaic, ncftp...) for term 2.x (specifically 2.0.4). If I try to run an app compiled for earlier term versions I get the error "Connect: Invalid Argument". If nobody's done it yet, I might set aside some time to do it. Regards, Andy ------------------------------ From: lendecke@namu09.gwdg.de (Volker Lendecke 29121346) Subject: Re: Netware Client Date: 06 Sep 1994 08:45:13 GMT Hi! In article evansmp@mb5194.aston.ac.uk (Mark Evans) writes: One problem with the Filesystem side of netware is that there dosn't appear to be anything attached to a file which can be used to "fake" an inode number. I do not think that this is really a problem. You might take a look at my smbfs (sunsite.unc.edu:/pub/Linux/ALPHA/smbfs). smbfs implements a client for WfW. The protocol used does not give you a number to identify the file. You only have the path. I studied the 'dynamics' of inodes quite a lot, and noticed the following: You do not really need unique inode numbers for each file on the complete filesystem. The only inode numbers which must be unique are those currently in use. All others can be allocated freely. A little exception to this scheme is a problem which Philipp Auersperg detected. The getwd() function relies on the inode numbers given back by readdir(). So you have to keep the inode numbers of the complete path leading to each inode in use unique and reproducable. (This is not implemented in smbfs-0.2, but 0.3 will come soon.) If I'm completely wrong, please tell me. I think the main problem with a Novell client is the protocol itself. All other things should be solvable. Volker +=================================================================+ ! Volker Lendecke Internet: lendecke@namu01.gwdg.de ! ! D-37081 Goettingen, Germany ! +=================================================================+ ------------------------------ From: bartddgd@w202zrz (Bernd Bartmann) Subject: Adaptec 2742AT Date: 6 Sep 1994 10:07:16 GMT Has anybody heard something about the new ADAPTEC 2742AT. Somebody told me that is has a new controller chip (AIC7870). I would like to know if it works with the LINUX 2742T driver from ftp.cpsc.ucalgary.ca and which new features it has. Bernd ------------------------------ ** FOR YOUR REFERENCE ** The service address, to which questions about the list itself and requests to be added to or deleted from it should be directed, is: Internet: Linux-Development-Request@NEWS-DIGESTS.MIT.EDU You can send mail to the entire list (and comp.os.linux.development) via: Internet: Linux-Development@NEWS-DIGESTS.MIT.EDU Linux may be obtained via one of these FTP sites: nic.funet.fi pub/OS/Linux tsx-11.mit.edu pub/linux sunsite.unc.edu pub/Linux End of Linux-Development Digest ****************************** .