From owner-linux-mips@oss.sgi.com Thu Mar 1 01:29:31 2001 Received: by oss.sgi.com id ; Thu, 1 Mar 2001 01:29:22 -0800 Received: from haliga.physik.TU-Cottbus.De ([141.43.75.9]:22797 "HELO haliga.physik.tu-cottbus.de") by oss.sgi.com with SMTP id ; Thu, 1 Mar 2001 01:29:07 -0800 Received: by haliga.physik.tu-cottbus.de (Postfix, from userid 7215) id 8D42F8EFE; Thu, 1 Mar 2001 10:24:46 +0100 (MET) Date: Thu, 1 Mar 2001 10:24:46 +0100 To: linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010301102446.B3177@physik.tu-cottbus.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: ; from Lisa.Hsu@taec.toshiba.com on Wed, Feb 28, 2001 at 07:00:13PM -0800 From: heinold@physik.tu-cottbus.de (H.Heinold) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Feb 28, 2001 at 07:00:13PM -0800, Lisa.Hsu@taec.toshiba.com wrote: > > Hi, All > > For using NFS boot, I've already edited the /etc/hosts, /etc/exports to add > the entry for my target board. The command line that I use in our EPROM > based bootloader is as follows: > > root=/dev/nfs rw ip=::::::rarp console=ttyS2 > nfsroot=209.243.136.151:/work/nfsroot > > I need to setup the NFSROOT filesystem on the server for my target board > (which is running in Big-endian mode), what are the steps that I have to > do? > For big endian you need big endian complied packages, you can retrieve the debian base2_2.2.tgz under ftp.uni-mainz.de/pub/Linux/debian-local/mips, which should work fine as nfsroot. I have some problems with open a console beacause on Indigo2 you only have output on the serial console. > There is a FTP site for getting RPM packages for little endian mode: > > tp://ftp.linux.sgi.com/[ig/linux/mips/mipsel-linux/RedHat-6.1/RPMS > > I could not find similar one for big-endian. Can anybody give me a > pointer to where the RPM packages reside on the web? > > > Thanks, > No prob. > Lisa > > > -- Henning Heinold From owner-linux-mips@oss.sgi.com Thu Mar 1 08:05:05 2001 Received: by oss.sgi.com id ; Thu, 1 Mar 2001 08:04:55 -0800 Received: from stereotomy.lineo.com ([64.50.107.151]:27399 "HELO stereotomy.lineo.com") by oss.sgi.com with SMTP id ; Thu, 1 Mar 2001 08:04:38 -0800 Received: from Lineo.COM (localhost.localdomain [127.0.0.1]) by stereotomy.lineo.com (Postfix) with ESMTP id 158104C92B; Thu, 1 Mar 2001 09:04:36 -0700 (MST) Message-ID: <3A9E7313.5090608@Lineo.COM> Date: Thu, 01 Mar 2001 09:04:35 -0700 From: Quinn Jensen Organization: Lineo, Inc. User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.16-9mdk i686; en-US; m18) Gecko/20001107 Netscape6/6.0 X-Accept-Language: en MIME-Version: 1.0 To: jsun@hermes.mvista.com Cc: linux-mips@oss.sgi.com Subject: Re: Patch allowing GDB to ignore misaligned data faults References: <000a01c0a0cf$849efbe0$dde0490a@BANANA> <3A9D70C2.6010504@Lineo.COM> <3A9D793E.4063ED17@mvista.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing jsun@hermes.mvista.com wrote > This does not sound right: this is already fixed long time ago by not > installing traps for exception 4&5. What kernel are you using You're right; I let my patch ferment too long and it rotted. Quinn From owner-linux-mips@oss.sgi.com Thu Mar 1 13:38:26 2001 Received: by oss.sgi.com id ; Thu, 1 Mar 2001 13:38:17 -0800 Received: from mailhost.taec.com ([209.243.128.33]:23499 "EHLO mailhost.taec.toshiba.com") by oss.sgi.com with ESMTP id ; Thu, 1 Mar 2001 13:37:53 -0800 Received: from hdqmta.taec.toshiba.com (hdqmta [209.243.180.59]) by mailhost.taec.toshiba.com (8.8.8+Sun/8.8.8) with ESMTP id NAA26829; Thu, 1 Mar 2001 13:37:14 -0800 (PST) Subject: Re: NFSROOT filesystem To: heinold@physik.tu-cottbus.de (H.Heinold) Cc: linux-mips@oss.sgi.com, owner-linux-mips@oss.sgi.com X-Mailer: Lotus Notes Release 5.0.3 March 21, 2000 Message-ID: From: Lisa.Hsu@taec.toshiba.com Date: Thu, 1 Mar 2001 13:30:57 -0800 X-MIMETrack: Serialize by Router on HDQMTA/TOSHIBA_TAEC(Release 5.0.5 |September 22, 2000) at 03/01/2001 01:36:00 PM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Thanks to Henning for showing me where to get the big-endian compiled packages and it works. Now, I need big-endian compiled "ash". Is anybody know where I can get it? Thanks, Lisa heinold@physik.tu- cottbus.de To: linux-mips@oss.sgi.com (H.Heinold) cc: Sent by: Subject: Re: NFSROOT filesystem owner-linux-mips@o ss.sgi.com 03/01/01 01:24 AM On Wed, Feb 28, 2001 at 07:00:13PM -0800, Lisa.Hsu@taec.toshiba.com wrote: > > Hi, All > > For using NFS boot, I've already edited the /etc/hosts, /etc/exports to add > the entry for my target board. The command line that I use in our EPROM > based bootloader is as follows: > > root=/dev/nfs rw ip=::::::rarp console=ttyS2 > nfsroot=209.243.136.151:/work/nfsroot > > I need to setup the NFSROOT filesystem on the server for my target board > (which is running in Big-endian mode), what are the steps that I have to > do? > For big endian you need big endian complied packages, you can retrieve the debian base2_2.2.tgz under ftp.uni-mainz.de/pub/Linux/debian-local/mips, which should work fine as nfsroot. I have some problems with open a console beacause on Indigo2 you only have output on the serial console. > There is a FTP site for getting RPM packages for little endian mode: > > tp://ftp.linux.sgi.com/[ig/linux/mips/mipsel-linux/RedHat-6.1/RPMS > > I could not find similar one for big-endian. Can anybody give me a > pointer to where the RPM packages reside on the web? > > > Thanks, > No prob. > Lisa > > > -- Henning Heinold From owner-linux-mips@oss.sgi.com Thu Mar 1 13:47:25 2001 Received: by oss.sgi.com id ; Thu, 1 Mar 2001 13:47:16 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:40694 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Thu, 1 Mar 2001 13:47:05 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f21Lg8G24303; Thu, 1 Mar 2001 13:42:08 -0800 Message-ID: <3A9EC293.F301E8D5@mvista.com> Date: Thu, 01 Mar 2001 13:43:47 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: Lisa.Hsu@taec.toshiba.com CC: "H.Heinold" , linux-mips@oss.sgi.com, owner-linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Lisa.Hsu@taec.toshiba.com wrote: > > Thanks to Henning for showing me where to get the big-endian compiled > packages and it works. Now, I need big-endian compiled "ash". > Is anybody know where I can get it? > > Thanks, > > Lisa > > > heinold@physik.tu- > cottbus.de To: linux-mips@oss.sgi.com > (H.Heinold) cc: > Sent by: Subject: Re: NFSROOT filesystem > owner-linux-mips@o > ss.sgi.com > > > 03/01/01 01:24 AM > > > > On Wed, Feb 28, 2001 at 07:00:13PM -0800, Lisa.Hsu@taec.toshiba.com wrote: > > > > Hi, All > > > > For using NFS boot, I've already edited the /etc/hosts, /etc/exports to > add > > the entry for my target board. The command line that I use in our EPROM > > based bootloader is as follows: > > > > root=/dev/nfs rw ip=::::::rarp console=ttyS2 > > nfsroot=209.243.136.151:/work/nfsroot > > > > I need to setup the NFSROOT filesystem on the server for my target board > > (which is running in Big-endian mode), what are the steps that I have to > > do? > > > For big endian you need big endian complied packages, you can retrieve the > debian base2_2.2.tgz > under ftp.uni-mainz.de/pub/Linux/debian-local/mips, which should work fine > as nfsroot. I have some > problems with open a console beacause on Indigo2 you only have output on > the serial console. > > > There is a FTP site for getting RPM packages for little endian mode: > > > > > tp://ftp.linux.sgi.com/[ig/linux/mips/mipsel-linux/RedHat-6.1/RPMS > > > > I could not find similar one for big-endian. Can anybody give me a > > pointer to where the RPM packages reside on the web? > > > > > > Thanks, > > > No prob. > > > Lisa > > > > > > Lisa, You can get either big endian or little endian NFS root fs on the following site. ftp://ftp.mvista.com/pub/Area51/mips_fp_le ftp://ftp.mvista.com/pub/Area51/mips_fp_be Jun From owner-linux-mips@oss.sgi.com Thu Mar 1 14:57:15 2001 Received: by oss.sgi.com id ; Thu, 1 Mar 2001 14:57:06 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:3588 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Thu, 1 Mar 2001 14:56:48 -0800 Received: from bilbo.physik.uni-konstanz.de [134.34.144.81] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 14Ybzo-0005Ny-00; Thu, 01 Mar 2001 23:56:28 +0100 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 14Yc0O-0001JT-00; Thu, 01 Mar 2001 23:57:04 +0100 Date: Thu, 1 Mar 2001 23:57:04 +0100 From: Guido Guenther To: Lisa.Hsu@taec.toshiba.com Cc: "H.Heinold" , linux-mips@oss.sgi.com, owner-linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010301235704.A5036@bilbo.physik.uni-konstanz.de> Mail-Followup-To: Lisa.Hsu@taec.toshiba.com, "H.Heinold" , linux-mips@oss.sgi.com, owner-linux-mips@oss.sgi.com References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from Lisa.Hsu@taec.toshiba.com on Thu, Mar 01, 2001 at 01:30:57PM -0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 01, 2001 at 01:30:57PM -0800, Lisa.Hsu@taec.toshiba.com wrote: > > Thanks to Henning for showing me where to get the big-endian compiled > packages and it works. Now, I need big-endian compiled "ash". > Is anybody know where I can get it? "apt-get install ash" should download and install ash. Welcome to the wonderfull world of debian :) --Guido From owner-linux-mips@oss.sgi.com Thu Mar 1 18:05:36 2001 Received: by oss.sgi.com id ; Thu, 1 Mar 2001 18:05:26 -0800 Received: from mail.isd.atr.co.jp ([133.186.81.186]:46596 "EHLO mail.isd.atr.co.jp") by oss.sgi.com with ESMTP id ; Thu, 1 Mar 2001 18:05:01 -0800 Received: from isd.atr.co.jp (jhart@hart [133.186.80.158]) by mail.isd.atr.co.jp (8.10.1/3.7W) with ESMTP id f2225EH89594 for ; Fri, 2 Mar 2001 11:05:14 +0900 (JST) Message-ID: <3A9F016E.C0F7E19D@isd.atr.co.jp> Date: Fri, 02 Mar 2001 11:11:58 +0900 From: "J. Hart" X-Mailer: Mozilla 4.51 [en] (X11; I; Linux 2.2.6 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Introduction Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I would like to take this opportunity to introduce myself if I may. My name is Joseph Hart. I work at ATR ISD Labs in Kyoto as a programmer and research assistant to Dr. Tom Ray on the ALife program Tierra, with which some of you may be familiar. I have been a programmer for about thirty years, and have worked with the Tierra project for about the last seven years. I finally moved to Kyoto five years ago to avoid commuting from Niagara Falls NY....:-) We are currently engaged in research using the network model of Tierra. My responsibilities include making upgrades and bug fixes to the Tierra code, maintaining and monitoring the Tierra network, sampling the "organisms" which "live" on it, and providing analyses of these. When another department at ATR finished operations recently, they discarded much of their equipment, and I thereby came into possession of what appears to be a perfectly functional Indigo2 Impact 10000. The hard drive seems to have been formatted, so I do not have IRIX for it. I would like to be able to set up Linux on it if that is possible, hence my interest in your project. I understand that there is quite a lot of work to be done to get Linux running on this machine, so since I have one, may I be of any assistance ? With Thanks, J. Hart ATR ISD Labs Kyoto, Japan jhart@isd.atr.co.jp From owner-linux-mips@oss.sgi.com Fri Mar 2 00:15:48 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 00:15:38 -0800 Received: from haliga.physik.TU-Cottbus.De ([141.43.75.9]:47629 "HELO haliga.physik.tu-cottbus.de") by oss.sgi.com with SMTP id ; Fri, 2 Mar 2001 00:15:24 -0800 Received: by haliga.physik.tu-cottbus.de (Postfix, from userid 7215) id BBAC28D67; Fri, 2 Mar 2001 09:15:16 +0100 (MET) Date: Fri, 2 Mar 2001 09:15:16 +0100 To: linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010302091516.A12824@physik.tu-cottbus.de> References: <3A9EC293.F301E8D5@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: <3A9EC293.F301E8D5@mvista.com>; from jsun@mvista.com on Thu, Mar 01, 2001 at 01:43:47PM -0800 From: heinold@physik.tu-cottbus.de (H.Heinold) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 01, 2001 at 01:43:47PM -0800, Jun Sun wrote: > Lisa, > > You can get either big endian or little endian NFS root fs on the following > site. > > ftp://ftp.mvista.com/pub/Area51/mips_fp_le > ftp://ftp.mvista.com/pub/Area51/mips_fp_be > > Jun Hi Jun, I looked at your site and can only find rpm's. Dont yo have an packed nfs-root.tar.gz? -- Henning Heinold From owner-linux-mips@oss.sgi.com Fri Mar 2 00:17:37 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 00:17:18 -0800 Received: from haliga.physik.TU-Cottbus.De ([141.43.75.9]:47885 "HELO haliga.physik.tu-cottbus.de") by oss.sgi.com with SMTP id ; Fri, 2 Mar 2001 00:17:12 -0800 Received: by haliga.physik.tu-cottbus.de (Postfix, from userid 7215) id 030228D67; Fri, 2 Mar 2001 09:17:10 +0100 (MET) Date: Fri, 2 Mar 2001 09:17:10 +0100 To: linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010302091710.B12824@physik.tu-cottbus.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: ; from Lisa.Hsu@taec.toshiba.com on Thu, Mar 01, 2001 at 01:30:57PM -0800 From: heinold@physik.tu-cottbus.de (H.Heinold) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 01, 2001 at 01:30:57PM -0800, Lisa.Hsu@taec.toshiba.com wrote: > > Thanks to Henning for showing me where to get the big-endian compiled > packages and it works. Now, I need big-endian compiled "ash". > Is anybody know where I can get it? > > Thanks, > > Lisa > Hm why you need the ash? You can give the kernel the follwing via the commandoline init=/bin/bash. -- Henning Heinold From owner-linux-mips@oss.sgi.com Fri Mar 2 07:39:41 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 07:39:21 -0800 Received: from galt.foobazco.org ([198.144.194.227]:51586 "EHLO galt.foobazco.org") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 07:38:55 -0800 Received: (from wesolows@localhost) by galt.foobazco.org (8.9.3/8.9.3) id HAA19165; Fri, 2 Mar 2001 07:38:30 -0800 Date: Fri, 2 Mar 2001 07:38:30 -0800 From: Keith M Wesolowski To: "H.Heinold" Cc: linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010302073830.A17373@foobazco.org> References: <3A9EC293.F301E8D5@mvista.com> <20010302091516.A12824@physik.tu-cottbus.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010302091516.A12824@physik.tu-cottbus.de>; from heinold@physik.tu-cottbus.de on Fri, Mar 02, 2001 at 09:15:16AM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Mar 02, 2001 at 09:15:16AM +0100, H.Heinold wrote: > I looked at your site and can only find rpm's. Dont yo have an packed > nfs-root.tar.gz? For those interested, a small big-endian filesystem suitable for this type of thing (and containing a static ash no less) is at ftp://oss.sgi.com/pub/linux/mips/mips-linux/simple/userland-0.2b (glibc 2.2-pre based) or ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/userland-0.1/. See http://foobazco.org/~wesolows/Install-HOWTO.html. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Fri Mar 2 08:39:42 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 08:39:33 -0800 Received: from mailhost.taec.com ([209.243.128.33]:44934 "EHLO mailhost.taec.toshiba.com") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 08:39:17 -0800 Received: from hdqmta.taec.toshiba.com (hdqmta [209.243.180.59]) by mailhost.taec.toshiba.com (8.8.8+Sun/8.8.8) with ESMTP id IAA27885; Fri, 2 Mar 2001 08:38:39 -0800 (PST) Subject: Re: NFSROOT filesystem To: heinold@physik.tu-cottbus.de (H.Heinold) Cc: linux-mips@oss.sgi.com, owner-linux-mips@oss.sgi.com X-Mailer: Lotus Notes Release 5.0.3 March 21, 2000 Message-ID: From: Lisa.Hsu@taec.toshiba.com Date: Fri, 2 Mar 2001 08:31:41 -0800 X-MIMETrack: Serialize by Router on HDQMTA/TOSHIBA_TAEC(Release 5.0.5 |September 22, 2000) at 03/02/2001 08:37:24 AM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing As I understand, ash requires mush less memory than other shells. I am working on an embedded system and memory is crucial to us. Thanks, Lisa heinold@physik.tu- cottbus.de To: linux-mips@oss.sgi.com (H.Heinold) cc: Sent by: Subject: Re: NFSROOT filesystem owner-linux-mips@o ss.sgi.com 03/02/01 12:17 AM On Thu, Mar 01, 2001 at 01:30:57PM -0800, Lisa.Hsu@taec.toshiba.com wrote: > > Thanks to Henning for showing me where to get the big-endian compiled > packages and it works. Now, I need big-endian compiled "ash". > Is anybody know where I can get it? > > Thanks, > > Lisa > Hm why you need the ash? You can give the kernel the follwing via the commandoline init=/bin/bash. -- Henning Heinold From owner-linux-mips@oss.sgi.com Fri Mar 2 08:57:32 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 08:57:22 -0800 Received: from mx.mips.com ([206.31.31.226]:2551 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 08:57:15 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id IAA11382 for ; Fri, 2 Mar 2001 08:57:15 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id IAA09692 for ; Fri, 2 Mar 2001 08:57:12 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id RAA25898 for ; Fri, 2 Mar 2001 17:56:49 +0100 (MET) Message-ID: <3A9FD0D0.887E372F@mips.com> Date: Fri, 02 Mar 2001 17:56:48 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Bug in get_insn_opcode. Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing There is a bug in the function get_insn_opcode in traps.c As 'epc' is an int pointer here, it should only be increased by 1 (4 byte) and not by 4 (4*4 = 16 bytes). See the patch below. /Carsten Index: arch/mips/kernel/traps.c =================================================================== RCS file: /home/repository/sw/linux-2.4.0/arch/mips/kernel/traps.c,v retrieving revision 1.10 diff -u -r1.10 traps.c --- traps.c 2001/02/28 13:46:43 1.10 +++ traps.c 2001/03/02 16:50:27 @@ -410,7 +410,7 @@ epc = (unsigned int *) (unsigned long) regs->cp0_epc; if (regs->cp0_cause & CAUSEF_BD) - epc += 4; + epc++; if (verify_area(VERIFY_READ, epc, 4)) { force_sig(SIGSEGV, current); Index: arch/mips64/kernel/traps.c =================================================================== RCS file: /home/repository/sw/linux-2.4.0/arch/mips64/kernel/traps.c,v retrieving revision 1.5 diff -u -r1.5 traps.c --- traps.c 2001/02/19 16:02:52 1.5 +++ traps.c 2001/03/02 16:50:13 @@ -371,7 +371,7 @@ epc = (unsigned int *) (unsigned long) regs->cp0_epc; if (regs->cp0_cause & CAUSEF_BD) - epc += 4; + epc++; if (verify_area(VERIFY_READ, epc, 4)) { force_sig(SIGSEGV, current); -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Fri Mar 2 09:03:02 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 09:02:42 -0800 Received: from u-175-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.175]:7941 "EHLO u-175-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 09:02:33 -0800 Received: from dea ([193.98.169.28]:14976 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Fri, 2 Mar 2001 09:02:25 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f22H1uH02713; Fri, 2 Mar 2001 18:01:56 +0100 Date: Fri, 2 Mar 2001 18:01:56 +0100 From: Ralf Baechle To: Lisa.Hsu@taec.toshiba.com Cc: heinold@physik.tu-cottbus.de (H.Heinold), linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010302180156.B2656@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from Lisa.Hsu@taec.toshiba.com on Fri, Mar 02, 2001 at 08:31:41AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Mar 02, 2001 at 08:31:41AM -0800, Lisa.Hsu@taec.toshiba.com wrote: > Subject: Re: NFSROOT filesystem > To: heinold@physik.tu-cottbus.de (H.Heinold) > Cc: linux-mips@oss.sgi.com, owner-linux-mips@oss.sgi.com Mind not cc'ing the owner-* address? That's the list admin who isn't necessarily interested in reading the discussion ... Ralf From owner-linux-mips@oss.sgi.com Fri Mar 2 10:34:22 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 10:34:01 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:47353 "EHLO orion.mvista.com") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 10:33:51 -0800 Received: (from jsun@localhost) by orion.mvista.com (8.9.3/8.9.3) id KAA16942; Fri, 2 Mar 2001 10:30:33 -0800 Date: Fri, 2 Mar 2001 10:30:33 -0800 From: Jun Sun To: "H.Heinold" Cc: linux-mips@oss.sgi.com Subject: Re: NFSROOT filesystem Message-ID: <20010302103033.A16933@mvista.com> References: <3A9EC293.F301E8D5@mvista.com> <20010302091516.A12824@physik.tu-cottbus.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010302091516.A12824@physik.tu-cottbus.de>; from heinold@physik.tu-cottbus.de on Fri, Mar 02, 2001 at 09:15:16AM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Mar 02, 2001 at 09:15:16AM +0100, H.Heinold wrote: > On Thu, Mar 01, 2001 at 01:43:47PM -0800, Jun Sun wrote: > > Lisa, > > > > You can get either big endian or little endian NFS root fs on the following > > site. > > > > ftp://ftp.mvista.com/pub/Area51/mips_fp_le > > ftp://ftp.mvista.com/pub/Area51/mips_fp_be > > > > Jun > > > Hi Jun, > > I looked at your site and can only find rpm's. Dont yo have an packed > nfs-root.tar.gz? > > Unfortunately no. Well you are welcome to create one based on those rpms. :-) For a list of suggested rpms for install, you can see ftp://ftp.mvista.com/pub/CDK/1.2/latest/MIPS/install/ddb5476/ You only need to install *.noarch.rpm and *.i386.rpm packages. Jun From owner-linux-mips@oss.sgi.com Fri Mar 2 10:38:01 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 10:37:52 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:50173 "EHLO orion.mvista.com") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 10:37:37 -0800 Received: (from jsun@localhost) by orion.mvista.com (8.9.3/8.9.3) id KAA16949; Fri, 2 Mar 2001 10:34:49 -0800 Date: Fri, 2 Mar 2001 10:34:49 -0800 From: Jun Sun To: Carsten Langgaard Cc: linux-mips@oss.sgi.com Subject: Re: Bug in get_insn_opcode. Message-ID: <20010302103449.B16933@mvista.com> References: <3A9FD0D0.887E372F@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A9FD0D0.887E372F@mips.com>; from carstenl@mips.com on Fri, Mar 02, 2001 at 05:56:48PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Mar 02, 2001 at 05:56:48PM +0100, Carsten Langgaard wrote: > There is a bug in the function get_insn_opcode in traps.c > > As 'epc' is an int pointer here, it should only be increased by 1 (4 > byte) and not by 4 (4*4 = 16 bytes). > See the patch below. > > /Carsten > Good catch! I am surprised that trap on branch delay slot is rare that we only discover this bug now ... Jun From owner-linux-mips@oss.sgi.com Fri Mar 2 15:48:02 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 15:47:53 -0800 Received: from stereotomy.lineo.com ([64.50.107.151]:9994 "HELO stereotomy.lineo.com") by oss.sgi.com with SMTP id ; Fri, 2 Mar 2001 15:47:32 -0800 Received: from Lineo.COM (localhost.localdomain [127.0.0.1]) by stereotomy.lineo.com (Postfix) with ESMTP id C6D564C92E; Fri, 2 Mar 2001 16:47:25 -0700 (MST) Message-ID: <3AA0310D.7050206@Lineo.COM> Date: Fri, 02 Mar 2001 16:47:25 -0700 From: Quinn Jensen Organization: Lineo, Inc. User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.16-9mdk i686; en-US; m18) Gecko/20001107 Netscape6/6.0 X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: loopback broken in 2.4.2 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing FYI - watch out for loopback problems in 2.4.2. See http://kt.zork.net/kernel-traffic/latest.html#11 I tried the patch, ftp://ftp.kernel.org/pub/linux/kernel/people/axboe/patches/2.4.2-pre4/loop-6.gz and it does fix it at least on a mipsel build. Quinn From owner-linux-mips@oss.sgi.com Fri Mar 2 18:48:45 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 18:48:26 -0800 Received: from smtp.psdc.com ([209.125.203.83]:57924 "EHLO smtp.psdc.com") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 18:48:03 -0800 Received: from BANANA ([209.125.203.85]) by smtp.psdc.com (8.8.8/8.8.8) with SMTP id SAA24492; Fri, 2 Mar 2001 18:31:39 -0800 Message-ID: <001b01c0a328$11736b50$dde0490a@BANANA> From: "Steven Liu" To: Cc: , "Kevin D. Kissell" Subject: libgcc2.a and mips-tfile Date: Fri, 2 Mar 2001 06:50:00 -0800 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0017_01C0A2E5.00ECE6F0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_0017_01C0A2E5.00ECE6F0 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0018_01C0A2E5.00ECE6F0" ------=_NextPart_001_0018_01C0A2E5.00ECE6F0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, Franz: I am doing cross-compiler for mips r3000 now and meet alot of problems. My host system is i386 with Rad Hat 7.0 installed.=20 First, I successfully built and installed binutils-2.8.1 by using = binutils-2.8.1.tar.gz and egcs-mips-linux-1.1.2-2.i386.rpm. This created = bin, lib, mips-linux subdirectories. Second, I installed the linux kernel source code for mips by using = linux-2.2.14-000715.tar.gz and configured it and enabled = CONFIG_CROSSCOMPILE. Made soft links: let mips-linux/include/asm = pointd to linux-2.2.14-000715/include/asm-mips and=20 mips-linux/include/linux pointd to linux-2.2.14-000715/include/linux. Third, unziped the egcs-1.1.2.tar.gz, added the patch = egcs-mips-linux-1.1.2-2.i386.rpm and configured it as following: ./configure --prefix=3D/home/sliu --with-newlib = --target=3Dmips-linux and made it this way: make SUBDIRS=3D"libiberty texinfo gcc" ALL_TARGET_MODULES=3D = CONFIGURE_TARGET_MODULES=3D INSTALL_TARGET_MODULES=3D LANGUAGES=3D"c" Then, it gave the following errors in gcc subdirectory: xgcc: installation problem, cannot exec `mips-tfile': No such file or = directory make[1]: *** [libgcc2.a] Error 1 make[1]: Leaving directory `/home/sliu/egcs-1.1.2/gcc' make: *** [all-gcc] Error 2 If you could give me any help, I would be greatly appreciated. Regards, Steven Liu ------=_NextPart_001_0018_01C0A2E5.00ECE6F0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi, Franz:
 
I am doing cross-compiler for mips = r3000 now and=20 meet alot of problems.
 
My host system is i386 with Rad Hat 7.0 = installed.=20
 
First, I successfully built and = installed=20 binutils-2.8.1 by using binutils-2.8.1.tar.gz and=20 egcs-mips-linux-1.1.2-2.i386.rpm. This created bin, = lib,=20 mips-linux subdirectories.
 
Second, I installed the linux kernel = source code=20 for mips by using linux-2.2.14-000715.tar.gz and=20 configured it and enabled CONFIG_CROSSCOMPILE.  Made soft links: = let =20 mips-linux/include/asm pointd to linux-2.2.14-000715/include/asm-mips = and=20
mips-linux/include/linux pointd to=20 linux-2.2.14-000715/include/linux.
 
Third, unziped the=20 egcs-1.1.2.tar.gz, added the patch=20 egcs-mips-linux-1.1.2-2.i386.rpm and configured = it as=20 following:
     = ./configure=20 --prefix=3D/home/sliu --with-newlib = --target=3Dmips-linux
and made it this way:
     make=20 SUBDIRS=3D"libiberty texinfo gcc" ALL_TARGET_MODULES=3D = CONFIGURE_TARGET_MODULES=3D=20 INSTALL_TARGET_MODULES=3D LANGUAGES=3D"c"
 
Then, it gave the following errors in = gcc=20 subdirectory:
 
xgcc: installation problem, = cannot exec=20 `mips-tfile': No such file or directory
make[1]: *** [libgcc2.a] = Error=20 1
make[1]: Leaving directory `/home/sliu/egcs-1.1.2/gcc'
make: *** = [all-gcc] Error 2
 
If you could give me any help, I would = be greatly=20 appreciated.
 
Regards,
 
 
Steven = Liu
------=_NextPart_001_0018_01C0A2E5.00ECE6F0-- ------=_NextPart_000_0017_01C0A2E5.00ECE6F0 Content-Type: text/plain; name="liu.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="liu.txt" make[1]: Entering directory `/home/sliu/egcs-1.1.2/libiberty'=0A= f=3D" "; \=0A= case $f in \=0A= *alloca.o*) f=3D"$f xmalloc.o xexit.o" ;; \=0A= esac; \=0A= echo $f > needed-list=0A= echo argv.o choose-temp.o concat.o cplus-dem.o fdmatch.o fnmatch.o = getopt.o getopt1.o getruntime.o hex.o floatformat.o objalloc.o obstack.o = pexecute.o spaces.o strerror.o strsignal.o xatexit.o xexit.o xmalloc.o = xstrdup.o xstrerror.o > required-list=0A= make[1]: Leaving directory `/home/sliu/egcs-1.1.2/libiberty'=0A= make[1]: Entering directory `/home/sliu/egcs-1.1.2/texinfo'=0A= make all-recursive=0A= make[2]: Entering directory `/home/sliu/egcs-1.1.2/texinfo'=0A= Making all in intl=0A= make[3]: Entering directory `/home/sliu/egcs-1.1.2/texinfo/intl'=0A= make[3]: Nothing to be done for `all'.=0A= make[3]: Leaving directory `/home/sliu/egcs-1.1.2/texinfo/intl'=0A= Making all in lib=0A= make[3]: Entering directory `/home/sliu/egcs-1.1.2/texinfo/lib'=0A= make[3]: Nothing to be done for `all'.=0A= make[3]: Leaving directory `/home/sliu/egcs-1.1.2/texinfo/lib'=0A= Making all in makeinfo=0A= make[3]: Entering directory `/home/sliu/egcs-1.1.2/texinfo/makeinfo'=0A= make[3]: Nothing to be done for `all'.=0A= make[3]: Leaving directory `/home/sliu/egcs-1.1.2/texinfo/makeinfo'=0A= Making all in util=0A= make[3]: Entering directory `/home/sliu/egcs-1.1.2/texinfo/util'=0A= make[3]: Nothing to be done for `all'.=0A= make[3]: Leaving directory `/home/sliu/egcs-1.1.2/texinfo/util'=0A= make[2]: Leaving directory `/home/sliu/egcs-1.1.2/texinfo'=0A= make[1]: Leaving directory `/home/sliu/egcs-1.1.2/texinfo'=0A= make[1]: Entering directory `/home/sliu/egcs-1.1.2/etc'=0A= make[1]: Nothing to be done for `all'.=0A= make[1]: Leaving directory `/home/sliu/egcs-1.1.2/etc'=0A= make[1]: Entering directory `/home/sliu/egcs-1.1.2/gcc'=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -I. -I. = -I./config \=0A= = -DGCC_INCLUDE_DIR=3D\"/home/sliu/lib/gcc-lib/mips-linux/egcs-2.91.66/incl= ude\" \=0A= -DGPLUSPLUS_INCLUDE_DIR=3D\"/home/sliu/include/g++\" \=0A= -DOLD_GPLUSPLUS_INCLUDE_DIR=3D\"/home/sliu/lib/g++-include\" \=0A= -DLOCAL_INCLUDE_DIR=3D\"/usr/local/include\" \=0A= -DCROSS_INCLUDE_DIR=3D\"/home/sliu/mips-linux/sys-include\" \=0A= -DTOOL_INCLUDE_DIR=3D\"/home/sliu/mips-linux/include\" \=0A= -c `echo ./cccp.c | sed 's,^\./,,'`=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -I. -I. = -I./config \=0A= -DPREFIX=3D\"/home/sliu\" \=0A= -c `echo ./prefix.c | sed 's,^\./,,'`=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -o cccp cccp.o = cexp.o prefix.o \=0A= version.o obstack.o =0A= rm -f cpp=0A= ln cccp cpp=0A= gcc -c -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -I. -I. = -I./config ./gencheck.c=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -o gencheck \=0A= gencheck.o ` case "obstack.o" in ?*) echo obstack.o ;; esac ` ` case "" = in ?*) echo ;; esac ` ` case "" in ?*) echo ;; esac ` ` case "" in ?*) = echo ;; esac ` ` case "" in ?*) echo ;; esac ` =0A= ./gencheck > tmp-check.h=0A= ./move-if-change tmp-check.h tree-check.h=0A= tree-check.h is unchanged=0A= touch s-check=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -I. -I. = -I./config \=0A= -DTARGET_NAME=3D\"mips-linux\" \=0A= -c `echo ./toplev.c | sed 's,^\./,,'`=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -o cc1 = c-parse.o c-lang.o c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o = c-aux-info.o c-common.o c-iterate.o toplev.o version.o tree.o = print-tree.o stor-layout.o fold-const.o function.o stmt.o except.o = expr.o calls.o expmed.o explow.o optabs.o varasm.o rtl.o print-rtl.o = rtlanal.o emit-rtl.o genrtl.o real.o regmove.o dbxout.o sdbout.o = dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o integrate.o jump.o = cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o regclass.o = local-alloc.o global.o reload.o reload1.o caller-save.o gcse.o = insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o insn-opinit.o = insn-recog.o insn-extract.o insn-output.o insn-emit.o profile.o = insn-attrtab.o mips.o getpwd.o convert.o dyn-string.o obstack.o =0A= /bin/sh ./genmultilib \=0A= "" \=0A= "" \=0A= "" \=0A= "" \=0A= "" > tmp-mlib.h=0A= ./move-if-change tmp-mlib.h multilib.h=0A= multilib.h is unchanged=0A= touch s-mlib=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -I. -I. = -I./config \=0A= -DSTANDARD_STARTFILE_PREFIX=3D\"/home/sliu/lib/\" = -DSTANDARD_EXEC_PREFIX=3D\"/home/sliu/lib/gcc-lib/\" = -DDEFAULT_TARGET_VERSION=3D\"egcs-2.91.66\" = -DDEFAULT_TARGET_MACHINE=3D\"mips-linux\" = -DTOOLDIR_BASE_PREFIX=3D\"/home/sliu/\" \=0A= -c `echo ./gcc.c | sed 's,^\./,,'`=0A= gcc -DCROSS_COMPILE -DIN_GCC -g -O2 -DHAVE_CONFIG_H -o xgcc gcc.o = prefix.o version.o \=0A= choose-temp.o pexecute.o mkstemp.o obstack.o =0A= echo "int xxy_us_dummy;" >tmp-dum.c=0A= /home/sliu/egcs-1.1.2/gcc/xgcc -B/home/sliu/egcs-1.1.2/gcc/ -S tmp-dum.c=0A= echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c=0A= if grep _xxy_us_dummy tmp-dum.s > /dev/null ; then \=0A= echo "int prepends_underscore =3D 1;" >>tmp-under.c; \=0A= else \=0A= echo "int prepends_underscore =3D 0;" >>tmp-under.c; \=0A= fi=0A= ./move-if-change tmp-under.c underscore.c=0A= underscore.c is unchanged=0A= rm -f tmp-dum.c tmp-dum.s=0A= touch s-under=0A= cp xgcc gcc-cross=0A= /home/sliu/egcs-1.1.2/gcc/xgcc -B/home/sliu/egcs-1.1.2/gcc/ -dumpspecs > = tmp-specs=0A= mv tmp-specs specs=0A= if [ -f libgcc2.ready ] ; then \=0A= true; \=0A= else \=0A= touch libgcc2.ready; \=0A= fi=0A= rm -f tmplibgcc2.a=0A= for name in _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 _lshrdi3 = _ashldi3 _ashrdi3 _ffsdi2 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 = _floatdidf _floatdisf _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi = _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi = _fixtfdi _fixunstfdi _floatditf __gcc_bcmp _varargs __dummy _eprintf _bb = _shtab _clear_cache _trampoline __main _exit _ctors _pure; \=0A= do \=0A= echo ${name}; \=0A= /home/sliu/egcs-1.1.2/gcc/xgcc -B/home/sliu/egcs-1.1.2/gcc/ -O2 = -DCROSS_COMPILE -DIN_GCC -g -O2 -I./include -g1 -DIN_LIBGCC2 = -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc -I. -I. -I./config -c = -DL${name} \=0A= ./libgcc2.c -o ${name}.o; \=0A= if [ $? -eq 0 ] ; then true; else exit 1; fi; \=0A= mips-linux-ar rc tmplibgcc2.a ${name}.o; \=0A= rm -f ${name}.o; \=0A= done=0A= _muldi3=0A= xgcc: installation problem, cannot exec `mips-tfile': No such file or = directory=0A= make[1]: *** [libgcc2.a] Error 1=0A= make[1]: Leaving directory `/home/sliu/egcs-1.1.2/gcc'=0A= make: *** [all-gcc] Error 2=0A= ------=_NextPart_000_0017_01C0A2E5.00ECE6F0-- From owner-linux-mips@oss.sgi.com Fri Mar 2 23:23:08 2001 Received: by oss.sgi.com id ; Fri, 2 Mar 2001 23:22:58 -0800 Received: from u-162-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.162]:19205 "EHLO u-162-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 2 Mar 2001 23:22:44 -0800 Received: from dea ([193.98.169.28]:17280 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Fri, 2 Mar 2001 23:22:31 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f237LFp05873; Sat, 3 Mar 2001 08:21:15 +0100 Date: Sat, 3 Mar 2001 08:21:15 +0100 From: Ralf Baechle To: Carsten Langgaard Cc: linux-mips@oss.sgi.com Subject: Re: Bug in get_insn_opcode. Message-ID: <20010303082115.B5750@bacchus.dhis.org> References: <3A9FD0D0.887E372F@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A9FD0D0.887E372F@mips.com>; from carstenl@mips.com on Fri, Mar 02, 2001 at 05:56:48PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Mar 02, 2001 at 05:56:48PM +0100, Carsten Langgaard wrote: > Date: Fri, 02 Mar 2001 17:56:48 +0100 > From: Carsten Langgaard > To: linux-mips@oss.sgi.com > Subject: Bug in get_insn_opcode. > > There is a bug in the function get_insn_opcode in traps.c > > As 'epc' is an int pointer here, it should only be increased by 1 (4 > byte) and not by 4 (4*4 = 16 bytes). > See the patch below. > Index: arch/mips/kernel/traps.c > =================================================================== > RCS file: /home/repository/sw/linux-2.4.0/arch/mips/kernel/traps.c,v > retrieving revision 1.10 > diff -u -r1.10 traps.c > --- traps.c 2001/02/28 13:46:43 1.10 > +++ traps.c 2001/03/02 16:50:27 Patch will behave (un-)funny on a cvs diff generated patch like this which lacks full pathnames in the --- and +++ lines. Patches for this behaviour are available on ftp.cyclic.com (so it still exists ...) or in more recent cvs rpms. Applied anyway, of course. Ralf From owner-linux-mips@oss.sgi.com Sun Mar 4 10:13:00 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 10:12:40 -0800 Received: from hermes.cs.kuleuven.ac.be ([134.58.40.3]:38318 "EHLO hermes.cs.kuleuven.ac.be") by oss.sgi.com with ESMTP id ; Sun, 4 Mar 2001 10:12:29 -0800 Received: from cassiopeia.home (root@dialup004.cs.kuleuven.ac.be [134.58.47.133]) by hermes.cs.kuleuven.ac.be (A_Good_MTA/8.11.1) with ESMTP id f24ICQT21536; Sun, 4 Mar 2001 19:12:26 +0100 (MET) Received: from localhost (geert@localhost) by cassiopeia.home (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id QAA01687; Sat, 3 Mar 2001 16:15:07 +0100 X-Authentication-Warning: cassiopeia.home: geert owned process doing -bs Date: Sat, 3 Mar 2001 16:15:05 +0100 (CET) From: Geert Uytterhoeven To: Ralf Baechle cc: Carsten Langgaard , linux-mips@oss.sgi.com Subject: Re: Bug in get_insn_opcode. In-Reply-To: <20010303082115.B5750@bacchus.dhis.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 3 Mar 2001, Ralf Baechle wrote: > On Fri, Mar 02, 2001 at 05:56:48PM +0100, Carsten Langgaard wrote: > > Index: arch/mips/kernel/traps.c > > =================================================================== > > RCS file: /home/repository/sw/linux-2.4.0/arch/mips/kernel/traps.c,v > > retrieving revision 1.10 > > diff -u -r1.10 traps.c > > --- traps.c 2001/02/28 13:46:43 1.10 > > +++ traps.c 2001/03/02 16:50:27 > > Patch will behave (un-)funny on a cvs diff generated patch like this which > lacks full pathnames in the --- and +++ lines. Patches for this > behaviour are available on ftp.cyclic.com (so it still exists ...) or in > more recent cvs rpms. Isn't patch supposed to look at the `Index' line? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Sun Mar 4 11:50:50 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 11:50:31 -0800 Received: from u-155-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.155]:1796 "EHLO u-155-18.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 4 Mar 2001 11:50:12 -0800 Received: from dea ([193.98.169.28]:8832 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Sun, 4 Mar 2001 20:49:59 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f24JmQn16937; Sun, 4 Mar 2001 20:48:26 +0100 Date: Sun, 4 Mar 2001 20:48:26 +0100 From: Ralf Baechle To: Geert Uytterhoeven Cc: Carsten Langgaard , linux-mips@oss.sgi.com Subject: Re: Bug in get_insn_opcode. Message-ID: <20010304204826.B15182@bacchus.dhis.org> References: <20010303082115.B5750@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from geert@linux-m68k.org on Sat, Mar 03, 2001 at 04:15:05PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Mar 03, 2001 at 04:15:05PM +0100, Geert Uytterhoeven wrote: > > > Index: arch/mips/kernel/traps.c > > > =================================================================== > > > RCS file: /home/repository/sw/linux-2.4.0/arch/mips/kernel/traps.c,v > > > retrieving revision 1.10 > > > diff -u -r1.10 traps.c > > > --- traps.c 2001/02/28 13:46:43 1.10 > > > +++ traps.c 2001/03/02 16:50:27 > > > > Patch will behave (un-)funny on a cvs diff generated patch like this which > > lacks full pathnames in the --- and +++ lines. Patches for this > > behaviour are available on ftp.cyclic.com (so it still exists ...) or in > > more recent cvs rpms. > > Isn't patch supposed to look at the `Index' line? Only when the environment variable POSIXLY_CORRECT is set to y which has a ton of other unwanted side effects, so patch would need wrapper scripts or what not else. Ralf From owner-linux-mips@oss.sgi.com Sun Mar 4 12:24:21 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 12:24:01 -0800 Received: from aeon.tvd.be ([195.162.196.20]:21801 "EHLO aeon.tvd.be") by oss.sgi.com with ESMTP id ; Sun, 4 Mar 2001 12:23:32 -0800 Received: from callisto.of.borg (root@cable-195-162-216-133.upc.chello.be [195.162.216.133]) by aeon.tvd.be (8.9.3/8.9.3/RELAY-1.1) with ESMTP id VAA22146 for ; Sun, 4 Mar 2001 21:23:29 +0100 (MET) Received: from localhost (geert@localhost) by callisto.of.borg (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id VAA13141 for ; Sun, 4 Mar 2001 21:21:16 +0100 X-Authentication-Warning: callisto.of.borg: geert owned process doing -bs Date: Sun, 4 Mar 2001 21:21:16 +0100 (CET) From: Geert Uytterhoeven To: Linux/MIPS Development Subject: drivers/sgi/char/linux_logo.h Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I'm cleaning up the logo code and found a penguin-with-beer logo (the politically incorrect version) in drivers/sgi/char/linux_logo.h. However, it looks like this file is not used anymore. Can I remove it? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Sun Mar 4 12:36:52 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 12:36:43 -0800 Received: from cassidy.nuernberg.linuxtag.net ([212.204.83.80]:44303 "HELO cassidy.nuernberg.linuxtag.net") by oss.sgi.com with SMTP id ; Sun, 4 Mar 2001 12:36:29 -0800 Received: from hydra.linuxtag.uni-kl.de (hydra.hq.linuxtag.net [192.168.0.1]) by cassidy.nuernberg.linuxtag.net (Postfix) with ESMTP id 5859EEC2AB for ; Sun, 4 Mar 2001 21:33:33 +0100 (CET) Received: by hydra.linuxtag.uni-kl.de (Postfix, from userid 1034) id 50C4F1B65; Sun, 4 Mar 2001 21:36:09 +0100 (CET) Date: Sun, 4 Mar 2001 21:36:09 +0100 From: Karsten Merker To: linux-mips@oss.sgi.com Subject: build-problems: GNU fileutils 4.01 on mipsel with glibc 2.2.2 Message-ID: <20010304213609.B25825@linuxtag.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hallo everyone, I am trying to get the components for a Debian mipsel-base.tgz built, based on glibc-2.2.2. I am working in a chroot()-environment, where I have installed glibc 2.2.2, binutils 2.10.91 and gcc 2.95.3 as precompiled binaries, all from Maciej's packages (glibc-2.2.2-2.mipsel.rpm, gcc-2.95.3-14.mipsel.rpm, binutils-2.10.91-1.mipsel.rpm plus devel and dependency packages). Gawk and perl are self-compiled inside the chroot()-environment. When trying to compile fileutils, the ./configure starts ok, but when coming to "checking for working mktime..." the script just hangs forever, and according to top there is nothing consuming CPU time (except for top itself). Compiling the fileutils on the "host system", i.e. outside the chroot()-environment using egcs-1.0.3a and glibc-2.0.6 the problem does not appear. Can anybody confirm this on another system? Any ideas what can be the reason for this? The system: bash> cat /proc/cpuinfo cpu : MIPS cpu model : R4000SC V3.0 system type : Digital DECstation 5000/1xx BogoMIPS : 49.75 byteorder : little endian unaligned accesses : 0 wait instruction : no microsecond timers : no extra interrupt vector : no hardware watchpoint : yes VCED exceptions : 360569 VCEI exceptions : 14106 bash> gcc -v Reading specs from /usr/lib/gcc-lib/mipsel-linux/2.95.3/specs gcc version 2.95.3 19991030 (prerelease) Kernel is 2.4.1 fresh from cvs. The output from ./configure: creating cache ./config.cache checking host system type... mipsel-unknown-linux-gnu checking for a BSD compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for mawk... no checking for gawk... gawk checking whether make sets ${MAKE}... yes checking for perl5.003 or newer... yes checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking how to run the C preprocessor... gcc -E checking dependency style of gcc... gcc checking how to run the C preprocessor... gcc -E checking whether gcc needs -traditional... no checking for ranlib... ranlib checking for AIX... no checking for minix/config.h... no checking build system type... mipsel-unknown-linux-gnu checking for getconf... getconf checking for CFLAGS value to request large file support... -D_FILE_OFFSET_BITS=64 checking for LDFLAGS value to request large file support... checking for LIBS value to request large file support... checking for _FILE_OFFSET_BITS... 64 checking for _LARGEFILE_SOURCE... no checking for _LARGE_FILES... no checking for gcc option to accept ANSI C... none needed checking for function prototypes... yes checking whether sys/types.h defines makedev... yes checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking whether closedir returns void... no checking for inttypes.h... yes checking for unsigned long long... yes checking for gcc option to accept ANSI C... none needed checking for uid_t in sys/types.h... yes checking whether byte ordering is bigendian... no checking for an ANSI C conforming const... yes checking for inline... inline checking for long double... yes checking for dirent.h that defines DIR... (cached) yes checking for opendir in -ldir... (cached) no checking for ANSI C header files... yes checking for struct stat.st_blksize... no checking for struct stat.st_blocks... yes checking whether struct tm is in sys/time.h or time.h... time.h checking whether time.h and sys/time.h may both be included... yes checking for struct tm.tm_zone... yes checking whether stat file-mode macros are broken... no checking for nanoseconds member of struct stat.st_mtim... no checking for st_dm_mode in struct stat... no checking type of array argument to getgroups... gid_t checking for mode_t... yes checking for off_t... yes checking for pid_t... yes checking return type of signal handlers... void checking for size_t... yes checking for uid_t in sys/types.h... (cached) yes checking for ino_t... yes checking for ssize_t... yes checking for library containing clock_gettime... -lrt checking for fdatasync... yes checking for clock_gettime... yes checking for long file names... yes checking for pathconf... yes checking for string.h... yes checking for fcntl.h... yes checking for limits.h... yes checking for sys/time.h... yes checking for sys/timeb.h... yes checking for errno.h... yes checking for unistd.h... yes checking for stdlib.h... yes checking for sys/param.h... yes checking for sys/statfs.h... yes checking for sys/fstyp.h... no checking for mnttab.h... no checking for mntent.h... yes checking for utime.h... yes checking for sys/statvfs.h... yes checking for sys/vfs.h... yes checking for sys/mntent.h... no checking for sys/mount.h... yes checking for sys/filsys.h... no checking for sys/fs_types.h... no checking for sys/acl.h... no checking for sys/wait.h... yes checking for sys/ioctl.h... yes checking for sys/fs/s5param.h... no checking for termios.h... yes checking for values.h... yes checking for euidaccess... yes checking for memcpy... yes checking for memcmp... yes checking for memset... yes checking for sys/time.h... (cached) yes checking for unistd.h... (cached) yes checking for alarm... yes checking for working mktime... [hanging forever] Greetings, Karsten -- #include Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung. From owner-linux-mips@oss.sgi.com Sun Mar 4 14:17:13 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 14:17:04 -0800 Received: from u-155-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.155]:4612 "EHLO u-155-18.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 4 Mar 2001 14:16:36 -0800 Received: from dea ([193.98.169.28]:21376 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Sun, 4 Mar 2001 23:16:23 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f24MFYY18180; Sun, 4 Mar 2001 23:15:34 +0100 Date: Sun, 4 Mar 2001 23:15:34 +0100 From: Ralf Baechle To: Karsten Merker Cc: linux-mips@oss.sgi.com Subject: Re: build-problems: GNU fileutils 4.01 on mipsel with glibc 2.2.2 Message-ID: <20010304231534.B17775@bacchus.dhis.org> References: <20010304213609.B25825@linuxtag.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010304213609.B25825@linuxtag.org>; from karsten@excalibur.cologne.de on Sun, Mar 04, 2001 at 09:36:09PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Mar 04, 2001 at 09:36:09PM +0100, Karsten Merker wrote: > I am trying to get the components for a Debian mipsel-base.tgz built, > based on glibc-2.2.2. I am working in a chroot()-environment, where I have > installed glibc 2.2.2, binutils 2.10.91 and gcc 2.95.3 as precompiled > binaries, all from Maciej's packages (glibc-2.2.2-2.mipsel.rpm, > gcc-2.95.3-14.mipsel.rpm, binutils-2.10.91-1.mipsel.rpm plus devel and > dependency packages). Gawk and perl are self-compiled inside the > chroot()-environment. When trying to compile fileutils, the ./configure > starts ok, but when coming to "checking for working mktime..." the script > just hangs forever, and according to top there is nothing consuming CPU > time (except for top itself). Compiling the fileutils on the "host > system", i.e. outside the chroot()-environment using egcs-1.0.3a and > glibc-2.0.6 the problem does not appear. Can anybody confirm this on > another system? Any ideas what can be the reason for this? Does you chroot environment have a mounted /proc filesystem? In the past we had obscure libc bugs which were triggered when /proc were not mounted. Ralf From owner-linux-mips@oss.sgi.com Sun Mar 4 18:01:55 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 18:01:35 -0800 Received: from short.adgrafix.com ([63.79.128.2]:4042 "EHLO short.adgrafix.com") by oss.sgi.com with ESMTP id ; Sun, 4 Mar 2001 18:01:20 -0800 Received: from ppan2 (c534317-a.stcla1.sfba.home.com [24.20.134.153]) by short.adgrafix.com (8.9.3/8.9.3) with SMTP id VAA20699; Sun, 4 Mar 2001 21:03:36 -0500 (EST) From: "Mike Klar" To: , Subject: FPU context clobbered by signals Date: Sun, 4 Mar 2001 17:56:38 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Back in September, Atsushi Nemoto reported a problem with the way signal handling was handling FPU contexts in the 2.2 kernel. I think I'm seeing the same thing in the 2.4 kernel. The behavior I observe is that a user process that is using floating point registers sees those registers get whacked when another process gets a signal. Just executing an arbitrary command from a bash shell (while running floating point test app in the background) is enough to demonstrate this. Looking at setup_sigcontext() and restore_sigcontext() in arch/mips/kernel/signal.c, the handling of FPU context certainly looks wrong. If nothing else, setting current->used_math to 0 will cause FPU context to be reinitialized the next time that process reacquires the FPU context. I was going to fix this, but I really can't figure out what this code is trying to do. Currently setup_sigcontext() appears to behave as follows: If the current process owns the FPU context, sc_ownedfp is set to 1 in the sigcontext passed to the signal handler, and the floating point registers are saved in that sigcontext. This makes sense. If the current process does not own the FPU context, but did at one point execute FPU operations (which all glibc apps will do for initialization), sc_ownedfp in the sigcontext is set to 0, and the floating point registers are still saved. This is, at the very least, a security hole, since those registers belong to a different process at that point. And restore_sigcontext() appears to behave thusly: If sc_ownedfp is set in the sigcontext that is passed back from the signal handler, the FPU context is restored from the sigcontext, and FPU context ownership is given to the current process, without saving the old context. Either I'm misunderstanding this, or there is a possibility that this will simply forget about some other process' FPU context. So what _is_ the desired behavior here? The current behavior (again, unless I'm misunderstanding something) gives the signal handler access to some other process' FPU context in the case that the signaled process did not own the FPU. Should it: 1) Only pass the floating point registers in sigcontext if the signaled process owned the FPU. or 2) Always pass the signaled process' floating point registers if it had ever used FPU operations. This would require getting those registers from the context saved on the stack instead of the current FP registers if the current process does not own the FPU. I guess what I'm trying to figure out here is the significance of sc_ownedfp in struct sigcontext. Option 1 would have it mean whether or not the floating point register values in sigcontext are meaningful, but this seems wrong. The signal handler may want to know what the process' floating point registers were at the time of the signal, unconditionally of whether it owned the FPU context at the time. Option 2 would have it mean... ummm... I'm not sure. I'm not sure why the signal handler would really care about whether or not this process owned the FPU or some other process did, as long as the floating point registers saved in sigcontext belong to the signaled process. It also doesn't seem all that useful to have the signal handler be able to change the FPU ownership by changing the value of sc_ownedfp. Mike Klar From owner-linux-mips@oss.sgi.com Sun Mar 4 19:40:55 2001 Received: by oss.sgi.com id ; Sun, 4 Mar 2001 19:40:36 -0800 Received: from agile-50.OntheNet.com.au ([203.144.13.50]:38150 "EHLO surfers.oz.agile.tv") by oss.sgi.com with ESMTP id ; Sun, 4 Mar 2001 19:40:12 -0800 Received: from agile.tv (IDENT:ldavies@tugun.oz.agile.tv [192.168.16.20]) by surfers.oz.agile.tv (8.11.0/8.11.0) with ESMTP id f253e1O16740; Mon, 5 Mar 2001 13:40:01 +1000 Message-ID: <3AA30A91.B5842678@agile.tv> Date: Mon, 05 Mar 2001 13:40:01 +1000 From: Liam Davies Reply-To: ldavies@oz.agile.tv Organization: Agile TV X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Troubles with TLB refills Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I am trying to get the 2.4 kernel up and running on the Cobalt boxes. At the moment I am trying to get the initial transition from kernel to user mode working. The elf loader is trying to put stuff in the stack for the new user process and *each* call to NEW_AUX_ENTRY is generating a page fault that cannot be resolved. The address generated by the BadVAddr on the TLBS exception is not correct. Also, I never receive a TLBrefill exception on the accesses. It is using the except_vec0_nevada handler. All that I can think of is that the handler at 0x80000000 is getting smashed after it is copied in -- ala troubles with _kd_mksound last year. Any ideas on what is happening?? how to fix it?? Thanks Liam elf_entry=4000b0 elf_bss=10010130 elf_brk=10010130 start_code=400000 end_code =400130 start_data=10010130 end_data =10010130 [sh:1:10004f4c:1:8005f504] Dump TLB all: Dump TLB wired: Wired: 0 Dump TLB address 10004f4c : No entry for address 0x10004f4c in TLB vma: start=10010000 vma: flags= 1873 Bad_Area: no_context: From owner-linux-mips@oss.sgi.com Mon Mar 5 01:04:29 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 01:04:08 -0800 Received: from mx.mips.com ([206.31.31.226]:30615 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 01:03:46 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA28018; Mon, 5 Mar 2001 01:03:35 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id BAA26292; Mon, 5 Mar 2001 01:03:31 -0800 (PST) Message-ID: <002e01c0a553$b5c48e00$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Mike Klar" , , References: Subject: Re: FPU context clobbered by signals Date: Mon, 5 Mar 2001 10:07:20 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Currently setup_sigcontext() appears to behave as follows: > If the current process owns the FPU context, sc_ownedfp is set to 1 in the > sigcontext passed to the signal handler, and the floating point registers > are saved in that sigcontext. This makes sense. > If the current process does not own the FPU context, but did at one point > execute FPU operations (which all glibc apps will do for initialization), > sc_ownedfp in the sigcontext is set to 0, and the floating point registers > are still saved. This is, at the very least, a security hole, since those > registers belong to a different process at that point. I'm speaking from first principles here, not from an analysis of the code on non-MIPS architectures, but what *should* happen on a signal to a process that is not the current/latest user of the FPU is that the FPU sigcontext information should be copied from the saved thread context state. > And restore_sigcontext() appears to behave thusly: > If sc_ownedfp is set in the sigcontext that is passed back from the signal > handler, the FPU context is restored from the sigcontext, and FPU context > ownership is given to the current process, without saving the old context. > Either I'm misunderstanding this, or there is a possibility that this will > simply forget about some other process' FPU context. The behavior described sort-of makes sense, if one is willing to take it on faith that the signal handler did not trash the sigcontext information (which I personally consider unwise). If the signal was sent to the current owner of the FPU, the post-signal thread FPU state needs to represent the pre-signal state of the FPU, which was saved in the sigcontext structure. > So what _is_ the desired behavior here? The desired behavior (IMHO) is that signals are dispatched with the FPU state corresponding to the last known FPU state of the thread taking the signal. If the only copy of that state prior to signal dispatch resides in the FPU, that state needs to be saved before signal dispatch and restored after signal return. Or, to put it another way, the semantics of signals with respect to FP registers should be the same as the semantics with respect to general purpose registers. The only wrinkle is the lazy FPU context switch logic, which creates two anomolous situations: one where the current contents of the FPU does not belong to the current thread (because the current thread has not executed any FP instructions), and one where the FP register state of a non-current thread is not yet saved in the thread state of that thread (because no subsequent thread has executed any FP instructions). Kevin K. From owner-linux-mips@oss.sgi.com Mon Mar 5 03:54:49 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 03:54:39 -0800 Received: from u-179-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.179]:9988 "EHLO u-179-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 03:54:14 -0800 Received: from dea ([193.98.169.28]:20354 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Mon, 5 Mar 2001 12:53:56 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f25AnRU27018; Mon, 5 Mar 2001 11:49:27 +0100 Date: Mon, 5 Mar 2001 11:49:27 +0100 From: Ralf Baechle To: ldavies@oz.agile.tv Cc: linux-mips@oss.sgi.com Subject: Re: Troubles with TLB refills Message-ID: <20010305114926.A26862@bacchus.dhis.org> References: <3AA30A91.B5842678@agile.tv> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AA30A91.B5842678@agile.tv>; from ldavies@agile.tv on Mon, Mar 05, 2001 at 01:40:01PM +1000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 05, 2001 at 01:40:01PM +1000, Liam Davies wrote: > I am trying to get the 2.4 kernel up and running on the Cobalt boxes. > At the moment I am trying to get the initial transition from kernel > to user mode working. > > The elf loader is trying to put stuff in the stack for the new user > process and *each* call to NEW_AUX_ENTRY is generating a page fault > that cannot be resolved. The address generated by the BadVAddr on the > TLBS exception is not correct. Also, I never receive a TLBrefill > exception on the accesses. It is using the except_vec0_nevada handler. The fault address 0x10004f4c looks wrong; NEW_AUX_ENTRY should access something near the top of stack, that is a value a few bytes below 0x80000000. I wonder if this behaviour is related to this CPU bug - one which btw. was never acknowledged by QED but identified independantly by sever Cobalt people back at the time. [head.S] /* TLB refill, EXL == 0, R52x0 "Nevada" version */ /* * This version has a bug workaround for the Nevada. It seems * as if under certain circumstances the move from cp0_context * might produce a bogus result when the mfc0 instruction and * it's consumer are in a different cacheline or a load instruction, * probably any memory reference, is between them. This is * potencially slower than the R4000 version, so we use this * special version. */ .set noreorder .set noat LEAF(except_vec0_nevada) .set mips3 mfc0 k0, CP0_BADVADDR # Get faulting address srl k0, k0, 22 # get pgd only bits lw k1, current_pgd # get pgd pointer sll k0, k0, 2 addu k1, k1, k0 # add in pgd offset lw k1, (k1) mfc0 k0, CP0_CONTEXT # get context reg srl k0, k0, 1 # get pte offset and k0, k0, 0xff8 addu k1, k1, k0 # add in offset lw k0, 0(k1) # get even pte lw k1, 4(k1) # get odd pte srl k0, k0, 6 # convert to entrylo0 mtc0 k0, CP0_ENTRYLO0 # load it srl k1, k1, 6 # convert to entrylo1 mtc0 k1, CP0_ENTRYLO1 # load it nop # QED specified nops nop tlbwr # write random tlb entry nop # traditional nop eret # return from trap END(except_vec0_nevada) [...] This exception handler has been modified since the version tested in the Cobalt Qube and I'm not sure if the bug workaround actually got tested since then. (Bonus points to whoever writes a good probe for this bug!) handle_page_fault got called and printed something; therefore the exception handler cannot possibly have been trashed. do_page_fault gets called by via the generic exception handler. The TLB vectors there are only taken if there is a TLB entry matching the address in the TLB. Therefore your theory about no tlb refill exception cannot be right. The TLB dump only displays entries where at least on of the entry0 / entry1 entries is valid, therefore you get an empty dump; maybe that made you believe you didn't get a TLB reload exception. Ralf From owner-linux-mips@oss.sgi.com Mon Mar 5 16:47:34 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 16:47:24 -0800 Received: from smtp.psdc.com ([209.125.203.83]:51788 "EHLO smtp.psdc.com") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 16:47:23 -0800 Received: from BANANA ([209.125.203.85]) by smtp.psdc.com (8.8.8/8.8.8) with SMTP id QAA01895 for ; Mon, 5 Mar 2001 16:31:02 -0800 Message-ID: <000801c0a572$b7471e40$dde0490a@BANANA> From: "Steven Liu" To: Subject: mips-tfile Date: Mon, 5 Mar 2001 04:49:28 -0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0005_01C0A52F.A8FAAB60" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_0005_01C0A52F.A8FAAB60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, All: Hi, All: I am working on cross-compiler for mips R3000 on Linux now and meet a = problem in egcs. My host system is i386 with Rad Hat 7.0 installed. First, I successfully built and installed binutils-2.8.1 by using=20 binutils-2.8.1.tar.gz and egcs-mips-linux-1.1.2-2.i386.rpm. This created = bin, lib, mips-linux subdirectories. Second, I installed the linux kernel source code for mips by using=20 linux-2.2.14-000715.tar.gz and configured it and enabled=20 CONFIG_CROSSCOMPILE. Made soft links: let mips-linux/include/asm=20 pointd to linux-2.2.14-000715/include/asm-mips and mips-linux/include/linux pointd to linux-2.2.14-000715/include/linux. Third, unziped the egcs-1.1.2.tar.gz, added the patch=20 egcs-mips-linux-1.1.2-2.i386.rpm and configured it as following: ./configure --prefix=3D3D/home/sliu --with-newlib = --target=3Dmips-linux and made it this way: make SUBDIRS=3D3D"libiberty texinfo gcc" ALL_TARGET_MODULES=3D3D = =3D CONFIGURE_TARGET_MODULES=3D3D INSTALL_TARGET_MODULES=3D3D = LANGUAGES=3D3D"c" Then, it gave the following errors in gcc subdirectory: xgcc: installation problem, cannot exec `mips-tfile': No such file or = =3D directory make[1]: *** [libgcc2.a] Error 1 make[1]: Leaving directory `/home/sliu/egcs-1.1.2/gcc' make: *** [all-gcc] Error 2 Any help would be greatly appreciated. Regards, Steven ------=_NextPart_000_0005_01C0A52F.A8FAAB60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi, All:
 
Hi, All:
 
I am working on cross-compiler for mips = R3000 on=20 Linux now and meet a problem in egcs.
 
My host system is i386 with Rad Hat 7.0 = installed.
 
First, I successfully built and = installed=20 binutils-2.8.1 by using
binutils-2.8.1.tar.gz and=20 egcs-mips-linux-1.1.2-2.i386.rpm. This created
bin, lib, mips-linux=20 subdirectories.
 
Second, I installed the linux kernel = source code=20 for mips by using
linux-2.2.14-000715.tar.gz and configured it and = enabled=20
CONFIG_CROSSCOMPILE.  Made soft links: let  = mips-linux/include/asm=20
pointd to linux-2.2.14-000715/include/asm-mips=20 and
mips-linux/include/linux pointd to=20 linux-2.2.14-000715/include/linux.
 
Third, unziped the egcs-1.1.2.tar.gz, = added the=20 patch
egcs-mips-linux-1.1.2-2.i386.rpm and configured it as=20 following:
     ./configure = --prefix=3D3D/home/sliu=20 --with-newlib --target=3Dmips-linux
and made it this=20 way:
     make SUBDIRS=3D3D"libiberty texinfo = gcc"=20 ALL_TARGET_MODULES=3D3D =3D
CONFIGURE_TARGET_MODULES=3D3D = INSTALL_TARGET_MODULES=3D3D=20 LANGUAGES=3D3D"c"
 
Then, it gave the following errors in = gcc=20 subdirectory:
 
xgcc: installation problem, cannot exec = `mips-tfile': No such file or =3D
directory
make[1]: *** = [libgcc2.a] Error=20 1
make[1]: Leaving directory `/home/sliu/egcs-1.1.2/gcc'
make: *** = [all-gcc] Error 2
 
Any help would be greatly = appreciated.
 
Regards,
 

Steven
------=_NextPart_000_0005_01C0A52F.A8FAAB60-- From owner-linux-mips@oss.sgi.com Mon Mar 5 19:10:54 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 19:10:34 -0800 Received: from agile-50.OntheNet.com.au ([203.144.13.50]:32011 "EHLO surfers.oz.agile.tv") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 19:10:30 -0800 Received: from agile.tv (IDENT:ldavies@tugun.oz.agile.tv [192.168.16.20]) by surfers.oz.agile.tv (8.11.0/8.11.0) with ESMTP id f263ARO23880; Tue, 6 Mar 2001 13:10:27 +1000 Message-ID: <3AA45523.CDF351CB@agile.tv> Date: Tue, 06 Mar 2001 13:10:27 +1000 From: Liam Davies Reply-To: ldavies@oz.agile.tv Organization: Agile TV X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: Troubles with TLB refills References: <3AA30A91.B5842678@agile.tv> <20010305114926.A26862@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > This exception handler has been modified since the version tested in the > Cobalt Qube and I'm not sure if the bug workaround actually got tested > since then. > It seems to work now. > handle_page_fault got called and printed something; therefore the > exception handler cannot possibly have been trashed. do_page_fault gets > called by via the generic exception handler. The TLB vectors there are only > taken if there is a TLB entry matching the address in the TLB. Therefore > your theory about no tlb refill exception cannot be right. And this is the way I understood the workings as well. > The TLB > dump only displays entries where at least on of the entry0 / entry1 > entries is valid, therefore you get an empty dump; maybe that made you > believe you didn't get a TLB reload exception. No, this is what I expected in the TLB since this was the first kuseg access. Not long after posting this message I found the problem. The exception handler had been trashed, *before* it was copied to 0x80000000. I'm not sure what trashed it yet, that is a job for later. What made this whole thing more puzzling is the actual stuff that was in 0x80000000 was absolute trash, it made no sense in terms of instruction encodings. I would have thought the cpu would have crapped out when it hit bad instructions. So it would seem the exceptions were occurring but the code that it was executing wasn't even code. Hence my assumption that we never got a TLB refill., even though the fault handler was being called. Liam From owner-linux-mips@oss.sgi.com Mon Mar 5 20:56:15 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 20:56:04 -0800 Received: from galt.foobazco.org ([198.144.194.227]:26257 "EHLO galt.foobazco.org") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 20:55:41 -0800 Received: (from wesolows@localhost) by galt.foobazco.org (8.9.3/8.9.3) id UAA26202; Mon, 5 Mar 2001 20:55:16 -0800 Date: Mon, 5 Mar 2001 20:55:16 -0800 From: Keith M Wesolowski To: Steven Liu Cc: linux-mips@oss.sgi.com Subject: Re: mips-tfile Message-ID: <20010305205516.A25870@foobazco.org> References: <000801c0a572$b7471e40$dde0490a@BANANA> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <000801c0a572$b7471e40$dde0490a@BANANA>; from stevenliu@psdc.com on Mon, Mar 05, 2001 at 04:49:28AM -0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 05, 2001 at 04:49:28AM -0800, Steven Liu wrote: > I am working on cross-compiler for mips R3000 on Linux now and meet a problem in egcs. > > My host system is i386 with Rad Hat 7.0 installed. > > First, I successfully built and installed binutils-2.8.1 by using > binutils-2.8.1.tar.gz and egcs-mips-linux-1.1.2-2.i386.rpm. This created > bin, lib, mips-linux subdirectories. This makes no sense...how/why did you use an rpm of egcs to build binutils from source? That doesn't really make any sense. Could you please indicate what exact files you are using and where you got them from? If you are applying patches, please mention those as well. > Second, I installed the linux kernel source code for mips by using > linux-2.2.14-000715.tar.gz and configured it and enabled > CONFIG_CROSSCOMPILE. Made soft links: let mips-linux/include/asm > pointd to linux-2.2.14-000715/include/asm-mips and > mips-linux/include/linux pointd to linux-2.2.14-000715/include/linux. This is not needed to build either gcc or the kernel. > Third, unziped the egcs-1.1.2.tar.gz, added the patch > egcs-mips-linux-1.1.2-2.i386.rpm and configured it as following: > ./configure --prefix=3D/home/sliu --with-newlib --target=mips-linux > and made it this way: > make SUBDIRS=3D"libiberty texinfo gcc" ALL_TARGET_MODULES=3D = > CONFIGURE_TARGET_MODULES=3D INSTALL_TARGET_MODULES=3D LANGUAGES=3D"c" What are you doing with both an rpm and a source tarball? An RPM is surely not a patch. Also, it is traditional to build gcc outside the source directory; it's possible that that is a source of trouble. The random "3D" in your output there is either another source of trouble or an artifact of your mailer; in either case it should be fixed. If you are having trouble building a cross-toolchain, you might consider getting make-cross from ftp://oss.sgi.com/pub/linux/mips/mips-linux/simple/crossdev - it takes most of the hard parts out of it. There's also a source toolchain there that seems to work fairly well; it compiles glibc, for example, which no version of egcs 1.1.2 I have seen will. Of course, if you want to use different versions you can do that as well. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Mon Mar 5 21:57:05 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 21:56:55 -0800 Received: from [62.145.23.107] ([62.145.23.107]:26416 "HELO fileserv2.Cologne.DE") by oss.sgi.com with SMTP id ; Mon, 5 Mar 2001 21:56:37 -0800 Received: from localhost (1929 bytes) by fileserv2.Cologne.DE via rmail with P:stdio/R:bind/T:smtp (sender: ) (ident using unix) id for ; Tue, 6 Mar 2001 06:56:35 +0100 (CET) (Smail-3.2.0.101 1997-Dec-17 #5 built 1998-Jan-19) Received: (from karsten@localhost) by excalibur.cologne.de (8.9.3/8.8.7) id TAA01480 for linux-mips@oss.sgi.com; Mon, 5 Mar 2001 19:59:39 +0100 Date: Mon, 5 Mar 2001 19:59:39 +0100 From: Karsten Merker To: linux-mips@oss.sgi.com Subject: Re: build-problems: GNU fileutils 4.01 on mipsel with glibc 2.2.2 Message-ID: <20010305195939.A1476@excalibur.cologne.de> Mail-Followup-To: linux-mips@oss.sgi.com References: <20010304213609.B25825@linuxtag.org> <20010304231534.B17775@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20010304231534.B17775@bacchus.dhis.org>; from ralf@oss.sgi.com on Sun, Mar 04, 2001 at 11:15:34PM +0100 X-No-Archive: yes Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Mar 04, 2001 at 11:15:34PM +0100, Ralf Baechle wrote: [glibc-2.2.2, gcc-2.95.3] > > chroot()-environment. When trying to compile fileutils, the ./configure > > starts ok, but when coming to "checking for working mktime..." the script > > just hangs forever, and according to top there is nothing consuming CPU > > time (except for top itself). Compiling the fileutils on the "host > > system", i.e. outside the chroot()-environment using egcs-1.0.3a and > > glibc-2.0.6 the problem does not appear. Can anybody confirm this on > > another system? Any ideas what can be the reason for this? > > Does you chroot environment have a mounted /proc filesystem? In the past > we had obscure libc bugs which were triggered when /proc were not > mounted. I had not mounted /proc, but doing so does not make any difference :-(. Greetings, Karsten -- #include Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung. From owner-linux-mips@oss.sgi.com Mon Mar 5 22:34:06 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 22:33:48 -0800 Received: from galt.foobazco.org ([198.144.194.227]:29329 "EHLO galt.foobazco.org") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 22:33:18 -0800 Received: (from wesolows@localhost) by galt.foobazco.org (8.9.3/8.9.3) id WAA26892; Mon, 5 Mar 2001 22:32:58 -0800 Date: Mon, 5 Mar 2001 22:32:58 -0800 From: Keith M Wesolowski To: Karsten Merker Cc: linux-mips@oss.sgi.com Subject: Re: build-problems: GNU fileutils 4.01 on mipsel with glibc 2.2.2 Message-ID: <20010305223258.B25870@foobazco.org> References: <20010304213609.B25825@linuxtag.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010304213609.B25825@linuxtag.org>; from karsten@excalibur.cologne.de on Sun, Mar 04, 2001 at 09:36:09PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Mar 04, 2001 at 09:36:09PM +0100, Karsten Merker wrote: > starts ok, but when coming to "checking for working mktime..." the script > just hangs forever, and according to top there is nothing consuming CPU ... > glibc-2.0.6 the problem does not appear. Can anybody confirm this on > another system? Any ideas what can be the reason for this? I can confirm that this does *not* happen for me with the same C library but current CVS binutils and gcc (3.0 branch) on a big-endian system. I have observed a definite and reproducible problem, however, with the version of binutils you described; in my case, the symptom was insertion of garbage instructions into my kernel. The problem went away when I upgraded binutils. I have no idea whether this is related to the problem you are seeing. I would suggest that you extract the test that configure is running into a small C program (the tests are usually C programs); try to compile, link, and run that program, and see what happens. It could be that the compiler or linker is hanging trying to build it, or that the program itself hangs for some reason. If the program hangs, run it in a debugger and/or use strace. Then post a minimal testcase. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Mon Mar 5 22:46:07 2001 Received: by oss.sgi.com id ; Mon, 5 Mar 2001 22:45:57 -0800 Received: from agile-50.OntheNet.com.au ([203.144.13.50]:23052 "EHLO surfers.oz.agile.tv") by oss.sgi.com with ESMTP id ; Mon, 5 Mar 2001 22:45:34 -0800 Received: from agile.tv (IDENT:ldavies@tugun.oz.agile.tv [192.168.16.20]) by surfers.oz.agile.tv (8.11.0/8.11.0) with ESMTP id f266jXO24529; Tue, 6 Mar 2001 16:45:33 +1000 Message-ID: <3AA4878C.F10825DE@agile.tv> Date: Tue, 06 Mar 2001 16:45:32 +1000 From: Liam Davies Reply-To: ldavies@oz.agile.tv Organization: Agile TV X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: Troubles with TLB refills References: <3AA30A91.B5842678@agile.tv> <20010305114926.A26862@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf, >From the change 1.42 to 1.43 on file arch/mips/kernel/traps.c some code was added to copy the EJTAG exception vector + /* + * Copy the EJTAG debug exception vector handler code to it's final + * destination. + */ + memcpy((void *)(KSEG0 + 0x300), &except_vec_ejtag_debug, 0x80); This code indescriminatly smashes the end of except_vec0_r4600 and all of except_vec0_nevada handlers with the .fill set to only 0x280 00000000800002d4 T except_vec0_r4600 0000000080000328 T except_vec0_nevada 0000000080000380 T except_vec0_r45k_bvahwbug I'm not sure under what platform we need to load JTAG support, but we can just increase the fill area in head.S to say 0x400 Cheers Liam =-------------= Agile TV Corporation From owner-linux-mips@oss.sgi.com Tue Mar 6 05:00:04 2001 Received: by oss.sgi.com id ; Tue, 6 Mar 2001 04:59:54 -0800 Received: from u-91-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.91]:26884 "EHLO u-91-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 6 Mar 2001 04:59:31 -0800 Received: from dea ([193.98.169.28]:7552 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Tue, 6 Mar 2001 13:59:20 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f26CwuB05839; Tue, 6 Mar 2001 13:58:56 +0100 Date: Tue, 6 Mar 2001 13:58:56 +0100 From: Ralf Baechle To: ldavies@oz.agile.tv Cc: linux-mips@oss.sgi.com Subject: Re: Troubles with TLB refills Message-ID: <20010306135856.E1184@bacchus.dhis.org> References: <3AA30A91.B5842678@agile.tv> <20010305114926.A26862@bacchus.dhis.org> <3AA45523.CDF351CB@agile.tv> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AA45523.CDF351CB@agile.tv>; from ldavies@agile.tv on Tue, Mar 06, 2001 at 01:10:27PM +1000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Mar 06, 2001 at 01:10:27PM +1000, Liam Davies wrote: > in terms of instruction encodings. I would have thought the cpu would have > crapped out when it hit bad instructions. So it would seem the > exceptions were occurring but the code that it was executing wasn't even code. > Hence my assumption that we never got a TLB refill., even though the fault > handler was being called. Probably somewhere in the garbage there was another memory reference which resulted in a second TLB exception, at that time a store to 0x10004f4c which then got handled via the general exception handler and resulted in do_page_fault being called. Ralf From owner-linux-mips@oss.sgi.com Tue Mar 6 06:00:54 2001 Received: by oss.sgi.com id ; Tue, 6 Mar 2001 06:00:35 -0800 Received: from u-91-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.91]:28932 "EHLO u-91-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 6 Mar 2001 06:00:05 -0800 Received: from dea ([193.98.169.28]:10112 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Tue, 6 Mar 2001 14:59:45 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f26DxIr06239; Tue, 6 Mar 2001 14:59:18 +0100 Date: Tue, 6 Mar 2001 14:59:18 +0100 From: Ralf Baechle To: Keith M Wesolowski Cc: Karsten Merker , linux-mips@oss.sgi.com Subject: Re: build-problems: GNU fileutils 4.01 on mipsel with glibc 2.2.2 Message-ID: <20010306145917.B5846@bacchus.dhis.org> References: <20010304213609.B25825@linuxtag.org> <20010305223258.B25870@foobazco.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010305223258.B25870@foobazco.org>; from wesolows@foobazco.org on Mon, Mar 05, 2001 at 10:32:58PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 05, 2001 at 10:32:58PM -0800, Keith M Wesolowski wrote: Did you need any patches for current CVS binutils / gcc? Ralf From owner-linux-mips@oss.sgi.com Tue Mar 6 19:37:39 2001 Received: by oss.sgi.com id ; Tue, 6 Mar 2001 19:37:20 -0800 Received: from ns.snowman.net ([63.80.4.34]:15877 "EHLO ns.snowman.net") by oss.sgi.com with ESMTP id ; Tue, 6 Mar 2001 19:36:50 -0800 Received: from localhost (nick@localhost) by ns.snowman.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id WAA25833 for ; Tue, 6 Mar 2001 22:36:45 -0500 Date: Tue, 6 Mar 2001 22:36:45 -0500 (EST) From: X-Sender: nick@ns cc: linux-mips@oss.sgi.com Subject: Problem makeing an O2 run bootp In-Reply-To: <20010306135856.E1184@bacchus.dhis.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I've got an o2 that I'm trying to make netboot, and it seems to work, however the o2 never acks the tftp packets. The tcpdump is attached. If anyone has suggestions/ideas I'd love to hear them. I booted the o2 and ran "bootp():" from the arc prompt. Thanks Nick 22:31:26.697102 arp who-has 10.1.1.3 tell 10.1.1.3 22:31:26.697348 10.1.1.3.bootpc > 255.255.255.255.bootps: xid:0xbbb2 secs:5 C:10.1.1.3 [|bootp] 22:31:26.698900 10.1.1.1.bootps > 10.1.1.3.bootpc: xid:0xbbb2 secs:5 C:10.1.1.3 Y:10.1.1.3 S:10.1.1.1 [|bootp] [tos 0x10] 22:31:26.699191 arp who-has 10.1.1.3 tell 10.1.1.3 22:31:26.710600 10.1.1.3.15283 > 10.1.1.1.tftp: 22 RRQ "vmlinuxo2" 22:31:26.741123 10.1.1.1.35447 > 10.1.1.3.15283: udp 516 (DF) 22:31:31.734006 arp who-has 10.1.1.3 tell 10.1.1.1 22:31:31.734156 arp reply 10.1.1.3 is-at 8:0:69:5:b8:cb 22:31:31.734291 10.1.1.1.35447 > 10.1.1.3.15283: udp 516 (DF) 22:31:36.734065 10.1.1.1.35447 > 10.1.1.3.15283: udp 516 (DF) 22:31:41.734046 10.1.1.1.35447 > 10.1.1.3.15283: udp 516 (DF) 22:31:46.734050 10.1.1.1.35447 > 10.1.1.3.15283: udp 516 (DF) 22:31:56.072778 10.1.1.3.15284 > 10.1.1.1.tftp: 22 RRQ "vmlinuxo2" 22:31:56.102821 10.1.1.1.35447 > 10.1.1.3.15284: udp 516 (DF) 22:32:01.094154 10.1.1.1.35447 > 10.1.1.3.15284: udp 516 (DF) 22:32:06.094045 10.1.1.1.35447 > 10.1.1.3.15284: udp 516 (DF) 22:32:11.094043 10.1.1.1.35447 > 10.1.1.3.15284: udp 516 (DF) 22:32:16.094071 10.1.1.1.35447 > 10.1.1.3.15284: udp 516 (DF) 22:32:21.094002 arp who-has 10.1.1.3 tell 10.1.1.1 22:32:21.094142 arp reply 10.1.1.3 is-at 8:0:69:5:b8:cb 22:32:26.000316 10.1.1.3.15285 > 10.1.1.1.tftp: 22 RRQ "vmlinuxo2" 22:32:26.030369 10.1.1.1.35447 > 10.1.1.3.15285: udp 516 (DF) 22:32:31.024092 10.1.1.1.35447 > 10.1.1.3.15285: udp 516 (DF) 22:32:36.024044 10.1.1.1.35447 > 10.1.1.3.15285: udp 516 (DF) 22:32:41.024045 10.1.1.1.35447 > 10.1.1.3.15285: udp 516 (DF) 22:32:46.024055 10.1.1.1.35447 > 10.1.1.3.15285: udp 516 (DF) 22:32:51.023999 arp who-has 10.1.1.3 tell 10.1.1.1 22:32:51.024138 arp reply 10.1.1.3 is-at 8:0:69:5:b8:cb 22:32:55.927938 10.1.1.3.15286 > 10.1.1.1.tftp: 22 RRQ "vmlinuxo2" 22:32:55.957167 10.1.1.1.35447 > 10.1.1.3.15286: udp 516 (DF) 22:33:00.954096 10.1.1.1.35447 > 10.1.1.3.15286: udp 516 (DF) 22:33:05.954047 10.1.1.1.35447 > 10.1.1.3.15286: udp 516 (DF) 22:33:10.954056 10.1.1.1.35447 > 10.1.1.3.15286: udp 516 (DF) 22:33:15.954051 10.1.1.1.35447 > 10.1.1.3.15286: udp 516 (DF) 22:33:20.954008 arp who-has 10.1.1.3 tell 10.1.1.1 22:33:20.954142 arp reply 10.1.1.3 is-at 8:0:69:5:b8:cb From owner-linux-mips@oss.sgi.com Wed Mar 7 01:07:11 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 01:06:52 -0800 Received: from mx.mips.com ([206.31.31.226]:10945 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 01:06:47 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA20906; Wed, 7 Mar 2001 01:06:43 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id BAA11045; Wed, 7 Mar 2001 01:06:41 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id KAA28493; Wed, 7 Mar 2001 10:06:15 +0100 (MET) Message-ID: <3AA5FA06.D9D5277@mips.com> Date: Wed, 07 Mar 2001 10:06:14 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Pete Popov CC: Ralf Baechle , David Jez , ppopov@pacbell.net, linux-mips@oss.sgi.com Subject: Re: redhat 7.0 References: <3A901B3F.ADADC601@pacbell.net> <20010220074903.A68652@stud.fee.vutbr.cz> <20010220215616.F2086@bacchus.dhis.org> <3A930AB3.3AEAE5BF@mvista.com> Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Pete Did you managed to get through the installation of the RedHat 7.0 packages ? I would like to do something similar. /Carsten Pete Popov wrote: > Ralf Baechle wrote: > > > > On Tue, Feb 20, 2001 at 07:49:04AM +0100, David Jez wrote: > > > > > > Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm > > > > running into is that after I netboot and mount simple-0.2b as the root > > > > fs, and install the rpm-4.0 tarball, rpm doesn't work with the > > > > libraries, or lack of, of that root fs. It looks like I need an fs with > > > > a working rpm-4.0, so that I can mount my second disk somewhere and > > > > install the 7.0 packages. Any suggestions? > > > Yes, > > > If you download rpm-3.0 (I'm not sure, try get newer version) you'll should > > > be able to work with rpm 4 packages. > > > > Oss has a tarball with statically linked rpm 4 binaries. Use that to > > convert your rpm database and then install the rpm 4 rpm package for real. > > I tried that; "rpm --rebuilddb" failed because it couldn't find some > library. I'll try again. > > Pete -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Wed Mar 7 05:02:53 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 05:02:33 -0800 Received: from mta6.snfc21.pbi.net ([206.13.28.240]:6366 "EHLO mta6.snfc21.pbi.net") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 05:02:05 -0800 Received: from pacbell.net ([63.194.214.47]) by mta6.snfc21.pbi.net (Sun Internet Mail Server sims.3.5.2000.01.05.12.18.p9) with ESMTP id <0G9T00C5OW6ABZ@mta6.snfc21.pbi.net>; Wed, 7 Mar 2001 05:01:23 -0800 (PST) Date: Wed, 07 Mar 2001 05:01:07 -0800 From: ppopov@pacbell.net Subject: Re: redhat 7.0 To: Carsten Langgaard Cc: Pete Popov , Ralf Baechle , David Jez , linux-mips@oss.sgi.com Message-id: <3AA63113.45430090@pacbell.net> MIME-version: 1.0 X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.14-5.0 i686) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit X-Accept-Language: bg, en References: <3A901B3F.ADADC601@pacbell.net> <20010220074903.A68652@stud.fee.vutbr.cz> <20010220215616.F2086@bacchus.dhis.org> <3A930AB3.3AEAE5BF@mvista.com> <3AA5FA06.D9D5277@mips.com> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Carsten Langgaard wrote: > > Hi Pete > > Did you managed to get through the installation of the RedHat 7.0 packages ? > I would like to do something similar. I haven't had time to try again. I tried the debian 2_2 tar ball, went through the partitioning and dvhtool exersize and managed to setup all of that. If I try RedHat 7.0 again and manage to install it before someone else does, I'll send instructions. Pete > Pete Popov wrote: > > > Ralf Baechle wrote: > > > > > > On Tue, Feb 20, 2001 at 07:49:04AM +0100, David Jez wrote: > > > > > > > > Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm > > > > > running into is that after I netboot and mount simple-0.2b as the root > > > > > fs, and install the rpm-4.0 tarball, rpm doesn't work with the > > > > > libraries, or lack of, of that root fs. It looks like I need an fs with > > > > > a working rpm-4.0, so that I can mount my second disk somewhere and > > > > > install the 7.0 packages. Any suggestions? > > > > Yes, > > > > If you download rpm-3.0 (I'm not sure, try get newer version) you'll should > > > > be able to work with rpm 4 packages. > > > > > > Oss has a tarball with statically linked rpm 4 binaries. Use that to > > > convert your rpm database and then install the rpm 4 rpm package for real. > > > > I tried that; "rpm --rebuilddb" failed because it couldn't find some > > library. I'll try again. > > > > Pete > > -- > _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com > |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 > | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 > TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 > Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Wed Mar 7 09:41:46 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 09:41:37 -0800 Received: from sovereign.org ([209.180.91.170]:41630 "EHLO lux.homenet") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 09:41:27 -0800 Received: (from jfree@localhost) by lux.homenet (8.11.3/8.11.2/Debian 8.11.2-1) id f27HfTH20547 for linux-mips@oss.sgi.com; Wed, 7 Mar 2001 10:41:29 -0700 From: Jim Freeman Date: Wed, 7 Mar 2001 10:41:28 -0700 To: linux-mips@oss.sgi.com Subject: 2.4.3-pre2 mips changes Message-ID: <20010307104128.A20517@sovereign.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="0OAP2g/MAC+5xKAE" Content-Disposition: inline User-Agent: Mutt/1.3.15i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --0OAP2g/MAC+5xKAE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline The attached patch contains the portion of 2.4.3-pre3 that affects arch/mips* and include/asm-mips* (most are just spelling changes, but not all ...). --0OAP2g/MAC+5xKAE Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="patch-2.4.3-pre3.mips" diff -u --recursive --new-file v2.4.2/linux/arch/mips/baget/irq.c linux/arch/mips/baget/irq.c --- v2.4.2/linux/arch/mips/baget/irq.c Wed Feb 21 18:20:13 2001 +++ linux/arch/mips/baget/irq.c Tue Mar 6 19:44:36 2001 @@ -199,7 +199,7 @@ add_interrupt_randomness(irq); __cli(); } else { - printk("do_IRQ: Unregistered IRQ (0x%X) occured\n", irq); + printk("do_IRQ: Unregistered IRQ (0x%X) occurred\n", irq); } unmask_irq(irq); irq_exit(cpu); diff -u --recursive --new-file v2.4.2/linux/arch/mips/boot/elf2ecoff.c linux/arch/mips/boot/elf2ecoff.c --- v2.4.2/linux/arch/mips/boot/elf2ecoff.c Mon Jul 5 20:35:17 1999 +++ linux/arch/mips/boot/elf2ecoff.c Tue Mar 6 19:44:36 2001 @@ -435,7 +435,7 @@ char ibuf [4096]; int remaining, cur, count; - /* Go the the start of the ELF symbol table... */ + /* Go to the start of the ELF symbol table... */ if (lseek (in, offset, SEEK_SET) < 0) { perror ("copy: lseek"); diff -u --recursive --new-file v2.4.2/linux/arch/mips/dec/prom/memory.c linux/arch/mips/dec/prom/memory.c --- v2.4.2/linux/arch/mips/dec/prom/memory.c Mon Aug 7 21:02:27 2000 +++ linux/arch/mips/dec/prom/memory.c Tue Mar 6 19:44:36 2001 @@ -31,7 +31,7 @@ extern int (*prom_printf)(char *, ...); #endif -volatile unsigned long mem_err = 0; /* So we know an error occured */ +volatile unsigned long mem_err = 0; /* So we know an error occurred */ extern char _end; diff -u --recursive --new-file v2.4.2/linux/arch/mips/defconfig linux/arch/mips/defconfig --- v2.4.2/linux/arch/mips/defconfig Thu Jul 27 18:36:54 2000 +++ linux/arch/mips/defconfig Sun Mar 4 14:30:18 2001 @@ -175,6 +175,7 @@ # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set diff -u --recursive --new-file v2.4.2/linux/arch/mips/kernel/mips_ksyms.c linux/arch/mips/kernel/mips_ksyms.c --- v2.4.2/linux/arch/mips/kernel/mips_ksyms.c Fri Aug 4 16:15:37 2000 +++ linux/arch/mips/kernel/mips_ksyms.c Fri Mar 2 11:15:47 2001 @@ -140,3 +140,4 @@ #endif EXPORT_SYMBOL(get_wchan); +EXPORT_SYMBOL(flush_tlb_page); diff -u --recursive --new-file v2.4.2/linux/arch/mips/sgi/kernel/indy_sc.c linux/arch/mips/sgi/kernel/indy_sc.c --- v2.4.2/linux/arch/mips/sgi/kernel/indy_sc.c Sat May 13 08:29:14 2000 +++ linux/arch/mips/sgi/kernel/indy_sc.c Tue Mar 6 19:44:36 2001 @@ -1,6 +1,6 @@ /* $Id: indy_sc.c,v 1.14 2000/03/25 22:35:07 ralf Exp $ * - * indy_sc.c: Indy cache managment functions. + * indy_sc.c: Indy cache management functions. * * Copyright (C) 1997 Ralf Baechle (ralf@gnu.org), * derived from r4xx0.c by David S. Miller (dm@engr.sgi.com). diff -u --recursive --new-file v2.4.2/linux/arch/mips/sgi/kernel/setup.c linux/arch/mips/sgi/kernel/setup.c --- v2.4.2/linux/arch/mips/sgi/kernel/setup.c Wed Aug 9 13:46:02 2000 +++ linux/arch/mips/sgi/kernel/setup.c Tue Mar 6 19:44:36 2001 @@ -165,7 +165,7 @@ *tcwp = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | SGINT_TCWORD_MSWST); /* Return the difference, this is how far the r4k counter increments - * for every 1/HZ seconds. We round off the the nearest 1 MHz of + * for every 1/HZ seconds. We round off the nearest 1 MHz of * master clock (= 1000000 / 100 / 2 = 5000 count). */ return ((ct1 - ct0) / 5000) * 5000; diff -u --recursive --new-file v2.4.2/linux/arch/mips64/defconfig linux/arch/mips64/defconfig --- v2.4.2/linux/arch/mips64/defconfig Wed Feb 21 18:20:13 2001 +++ linux/arch/mips64/defconfig Sun Mar 4 14:30:18 2001 @@ -165,6 +165,7 @@ # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set diff -u --recursive --new-file v2.4.2/linux/arch/mips64/kernel/mips64_ksyms.c linux/arch/mips64/kernel/mips64_ksyms.c --- v2.4.2/linux/arch/mips64/kernel/mips64_ksyms.c Thu Jul 27 18:36:54 2000 +++ linux/arch/mips64/kernel/mips64_ksyms.c Fri Mar 2 11:15:47 2001 @@ -121,3 +121,4 @@ #endif EXPORT_SYMBOL(get_wchan); +EXPORT_SYMBOL(flush_tlb_page); diff -u --recursive --new-file v2.4.2/linux/arch/mips64/mm/fault.c linux/arch/mips64/mm/fault.c --- v2.4.2/linux/arch/mips64/mm/fault.c Tue Nov 28 21:42:04 2000 +++ linux/arch/mips64/mm/fault.c Tue Mar 6 19:44:36 2001 @@ -61,7 +61,7 @@ /* * Unlock any spinlocks which will prevent us from getting the - * message out (timerlist_lock is aquired through the + * message out (timerlist_lock is acquired through the * console unblank code) */ void bust_spinlocks(void) diff -u --recursive --new-file v2.4.2/linux/arch/mips64/sgi-ip22/ip22-sc.c linux/arch/mips64/sgi-ip22/ip22-sc.c --- v2.4.2/linux/arch/mips64/sgi-ip22/ip22-sc.c Sat May 13 08:30:17 2000 +++ linux/arch/mips64/sgi-ip22/ip22-sc.c Tue Mar 6 19:44:36 2001 @@ -1,6 +1,6 @@ /* $Id: ip22-sc.c,v 1.2 1999/12/04 03:59:01 ralf Exp $ * - * indy_sc.c: Indy cache managment functions. + * indy_sc.c: Indy cache management functions. * * Copyright (C) 1997 Ralf Baechle (ralf@gnu.org), * derived from r4xx0.c by David S. Miller (dm@engr.sgi.com). diff -u --recursive --new-file v2.4.2/linux/include/asm-mips64/smp.h linux/include/asm-mips64/smp.h --- v2.4.2/linux/include/asm-mips64/smp.h Fri Aug 4 16:15:37 2000 +++ linux/include/asm-mips64/smp.h Fri Mar 2 11:30:15 2001 @@ -40,6 +40,7 @@ /* Good enough for toy^Wupto 64 CPU Origins. */ extern unsigned long cpu_present_mask; +#define cpu_online_map cpu_present_mask #endif --0OAP2g/MAC+5xKAE-- From owner-linux-mips@oss.sgi.com Wed Mar 7 11:12:28 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 11:12:08 -0800 Received: from [63.148.55.4] ([63.148.55.4]:14580 "EHLO ninigret.metatel.office") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 11:11:55 -0800 Received: from ninigret.metatel.office (IDENT:rafal@localhost.metatel.office [127.0.0.1]) by ninigret.metatel.office (8.9.3/8.8.8) with ESMTP id OAA15309; Wed, 7 Mar 2001 14:11:17 -0500 Message-Id: <200103071911.OAA15309@ninigret.metatel.office> From: Rafal Boni To: nick@snowman.net Cc: linux-mips@oss.sgi.com Subject: Re: Problem makeing an O2 run bootp In-Reply-To: Your message of "Tue, 06 Mar 2001 22:36:45 EST." X-Mailer: NMH 1.0 / EXMH 2.0.3 Date: Wed, 07 Mar 2001 14:11:17 -0500 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Content-Type: text/plain; charset=us-ascii In message , you write: - -> I've got an o2 that I'm trying to make netboot, and it seems to work, - -> however the o2 never acks the tftp packets. The tcpdump is attached. If - -> anyone has suggestions/ideas I'd love to hear them. I booted the o2 and - -> ran "bootp():" from the arc prompt. I had issues with my Indigo2 where the PROM rejected all TFTP packets from ports > 32767 (but that's with a stone-age PROM, I imagine O2's would have a somewhat more modern PROM). Also, try 'setenv DEBUG 1' (dunno if that does or doesn't work on the O2, it does on the Indigo2) in the PROM and see if it gives any tell- tale output. - --rafal - ---- Rafal Boni rafal.boni@eDial.com PGP key C7D3024C, print EA49 160D F5E4 C46A 9E91 524E 11E0 7133 C7D3 024C Need to get a hold of me? http://800.edial.com/rafal.boni@eDial.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.0 (GNU/Linux) Comment: Exmh version 2.1.1 10/15/1999 iD8DBQE6pofVEeBxM8fTAkwRAmNfAKDsC3yF1WmIZUK9i7Pu+VCR/iy3DACfQjIq NlO8XXf87pp0cJkVDTw/tAY= =gc8M -----END PGP SIGNATURE----- From owner-linux-mips@oss.sgi.com Wed Mar 7 11:15:28 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 11:15:08 -0800 Received: from ns.snowman.net ([63.80.4.34]:24585 "EHLO ns.snowman.net") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 11:15:01 -0800 Received: from localhost (nick@localhost) by ns.snowman.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id OAA05183; Wed, 7 Mar 2001 14:14:51 -0500 Date: Wed, 7 Mar 2001 14:14:51 -0500 (EST) From: X-Sender: nick@ns To: Rafal Boni cc: linux-mips@oss.sgi.com Subject: Re: Problem makeing an O2 run bootp In-Reply-To: <200103071911.OAA15309@ninigret.metatel.office> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Thanks much. I'll try that. It has also been suggested that O2s probably refuse all packets with DF set, so I will attempt to fix that as well. Nick On Wed, 7 Mar 2001, Rafal Boni wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Content-Type: text/plain; charset=us-ascii > > In message , you write: > > - -> I've got an o2 that I'm trying to make netboot, and it seems to work, > - -> however the o2 never acks the tftp packets. The tcpdump is attached. If > - -> anyone has suggestions/ideas I'd love to hear them. I booted the o2 and > - -> ran "bootp():" from the arc prompt. > > I had issues with my Indigo2 where the PROM rejected all TFTP packets > from ports > 32767 (but that's with a stone-age PROM, I imagine O2's > would have a somewhat more modern PROM). > > Also, try 'setenv DEBUG 1' (dunno if that does or doesn't work on the > O2, it does on the Indigo2) in the PROM and see if it gives any tell- > tale output. > > - --rafal > > - ---- > Rafal Boni rafal.boni@eDial.com > PGP key C7D3024C, print EA49 160D F5E4 C46A 9E91 524E 11E0 7133 C7D3 024C > Need to get a hold of me? http://800.edial.com/rafal.boni@eDial.com > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.0.0 (GNU/Linux) > Comment: Exmh version 2.1.1 10/15/1999 > > iD8DBQE6pofVEeBxM8fTAkwRAmNfAKDsC3yF1WmIZUK9i7Pu+VCR/iy3DACfQjIq > NlO8XXf87pp0cJkVDTw/tAY= > =gc8M > -----END PGP SIGNATURE----- > From owner-linux-mips@oss.sgi.com Wed Mar 7 12:03:58 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 12:03:38 -0800 Received: from FORT-POINT-STATION.MIT.EDU ([18.72.0.53]:61847 "EHLO fort-point-station.mit.edu") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 12:03:12 -0800 Received: from grand-central-station.mit.edu (GRAND-CENTRAL-STATION.MIT.EDU [18.7.21.82]) by fort-point-station.mit.edu (8.9.2/8.9.2) with ESMTP id PAA06855 for ; Wed, 7 Mar 2001 15:03:04 -0500 (EST) Received: from melbourne-city-street.MIT.EDU (MELBOURNE-CITY-STREET.MIT.EDU [18.69.0.45]) by grand-central-station.mit.edu (8.9.2/8.9.2) with ESMTP id PAA04770 for ; Wed, 7 Mar 2001 15:03:04 -0500 (EST) Received: from scrubbing-bubbles.mit.edu (SCRUBBING-BUBBLES.MIT.EDU [18.184.0.32]) by melbourne-city-street.MIT.EDU (8.9.3/8.9.2) with ESMTP id PAA19532 for ; Wed, 7 Mar 2001 15:03:04 -0500 (EST) Received: from localhost (kbarr@localhost) by scrubbing-bubbles.mit.edu (8.9.3) with ESMTP id PAA06611; Wed, 7 Mar 2001 15:03:03 -0500 (EST) Date: Wed, 7 Mar 2001 15:03:03 -0500 (EST) From: Kenneth C Barr To: Subject: oops on shutdown Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I receive this error any time I try to "reboot" or "shutdown" my Indy running a snapshot of 2.4.1. Is this normal or experienced by anyone else? Easy solution would be never to turn off the machine, but I want to make sure this isn't indicative of a larger problem. (eg, broken paging?) shutdown: couldn't unmount /dev/sda1 Unable to handle kernel paging request at virtual address 00000000, epc == 00008 Oops in fault.c:do_page_fault, line 172: regs: ... epc 00000000 Status 1000fc03 Cause 00000008 Process reboot (pid:39, stackpage=8bc8e000) Stack: ... Call trace: [<88031a6c>] [<88031a64>] [<8813f734>] [<880b9a5c>] [<88058714>] Code: (Bad address in epc) From owner-linux-mips@oss.sgi.com Wed Mar 7 23:59:43 2001 Received: by oss.sgi.com id ; Wed, 7 Mar 2001 23:59:33 -0800 Received: from mailout4-0.nyroc.rr.com ([24.92.226.120]:893 "EHLO mailout4-0.nyroc.rr.com") by oss.sgi.com with ESMTP id ; Wed, 7 Mar 2001 23:59:17 -0800 Received: from hork (roc-24-161-76-252.rochester.rr.com [24.161.76.252]) by mailout4-0.nyroc.rr.com (8.11.2/RoadRunner 1.03) with ESMTP id f287tDb17402; Thu, 8 Mar 2001 02:55:34 -0500 (EST) Received: from molotov by hork with local (Exim 3.22 #1 (Debian)) id 14avJ2-0003Zg-00; Thu, 08 Mar 2001 02:57:52 -0500 Date: Thu, 8 Mar 2001 02:57:51 -0500 To: nick@snowman.net Cc: linux-mips@oss.sgi.com Subject: Re: Problem makeing an O2 run bootp Message-ID: <20010308025751.G5830@hork> Mail-Followup-To: nick@snowman.net, linux-mips@oss.sgi.com References: <20010306135856.E1184@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="tvOENZuN7d6HfOWU" Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: ; from nick@snowman.net on Tue, Mar 06, 2001 at 10:36:45PM -0500 From: Chris Ruvolo Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --tvOENZuN7d6HfOWU Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Mar 06, 2001 at 10:36:45PM -0500, nick@snowman.net wrote: > I've got an o2 that I'm trying to make netboot, and it seems to work, > however the o2 never acks the tftp packets. The tcpdump is attached. If > anyone has suggestions/ideas I'd love to hear them. I booted the o2 and > ran "bootp():" from the arc prompt. I had the same problem with my Indy. I think this is in the HOWTO now, but in case you missed it.. If you are running your tftpd on Linux >=3D 2.3.x= =20 echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc Worked for me. -Chris --tvOENZuN7d6HfOWU Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE6pzt/KO6EG1hc77ERAlZjAJ4+vNnSmpU7qNKbatB8quD403xqmwCg4IBE mcSkUMYaY9GfYfWRQJHJ4lE= =npxq -----END PGP SIGNATURE----- --tvOENZuN7d6HfOWU-- From owner-linux-mips@oss.sgi.com Thu Mar 8 03:14:44 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 03:14:34 -0800 Received: from mx.mips.com ([206.31.31.226]:19420 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 03:14:10 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id DAA03014; Thu, 8 Mar 2001 03:13:55 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id DAA21134; Thu, 8 Mar 2001 03:13:52 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id MAA26053; Thu, 8 Mar 2001 12:13:25 +0100 (MET) Message-ID: <3AA76955.2819476F@mips.com> Date: Thu, 08 Mar 2001 12:13:25 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: ppopov@pacbell.net CC: Pete Popov , Ralf Baechle , David Jez , linux-mips@oss.sgi.com Subject: Re: redhat 7.0 References: <3A901B3F.ADADC601@pacbell.net> <20010220074903.A68652@stud.fee.vutbr.cz> <20010220215616.F2086@bacchus.dhis.org> <3A930AB3.3AEAE5BF@mvista.com> <3AA5FA06.D9D5277@mips.com> <3AA63113.45430090@pacbell.net> Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Please Ralf, could you help me here. I did the same as Pete describe below, and I got the same result. When I tried "rpm --rebuilddb" it fails because it couldn't find some libraries. The rpm-tarball contains a statically linked rpm binary, but rpmdb is dynamically linked, could you please provide me with a statically linked rpmdb binary, that would be great. /Carsten ppopov@pacbell.net wrote: > Carsten Langgaard wrote: > > > > Hi Pete > > > > Did you managed to get through the installation of the RedHat 7.0 packages ? > > I would like to do something similar. > > I haven't had time to try again. I tried the debian 2_2 tar ball, went > through the partitioning and dvhtool exersize and managed to setup all > of that. If I try RedHat 7.0 again and manage to install it before > someone else does, I'll send instructions. > > Pete > > > Pete Popov wrote: > > > > > Ralf Baechle wrote: > > > > > > > > On Tue, Feb 20, 2001 at 07:49:04AM +0100, David Jez wrote: > > > > > > > > > > Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm > > > > > > running into is that after I netboot and mount simple-0.2b as the root > > > > > > fs, and install the rpm-4.0 tarball, rpm doesn't work with the > > > > > > libraries, or lack of, of that root fs. It looks like I need an fs with > > > > > > a working rpm-4.0, so that I can mount my second disk somewhere and > > > > > > install the 7.0 packages. Any suggestions? > > > > > Yes, > > > > > If you download rpm-3.0 (I'm not sure, try get newer version) you'll should > > > > > be able to work with rpm 4 packages. > > > > > > > > Oss has a tarball with statically linked rpm 4 binaries. Use that to > > > > convert your rpm database and then install the rpm 4 rpm package for real. > > > > > > I tried that; "rpm --rebuilddb" failed because it couldn't find some > > > library. I'll try again. > > > > > > Pete > > > > -- > > _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com > > |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 > > | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 > > TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 > > Denmark http://www.mips.com -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Mar 8 08:19:49 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 08:19:39 -0800 Received: from jester.ti.com ([192.94.94.1]:34704 "EHLO jester.ti.com") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 08:19:18 -0800 Received: from dlep7.itg.ti.com ([157.170.134.103]) by jester.ti.com (8.11.1/8.11.1) with ESMTP id f28GJCD03514 for ; Thu, 8 Mar 2001 10:19:12 -0600 (CST) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA13440 for ; Thu, 8 Mar 2001 10:19:12 -0600 (CST) Received: from dlep4.itg.ti.com (dlep4-maint.itg.ti.com [157.170.133.17]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA13395 for ; Thu, 8 Mar 2001 10:19:11 -0600 (CST) Received: from ti.com (reddwarf.sc.ti.com [158.218.100.143]) by dlep4.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA22243 for ; Thu, 8 Mar 2001 10:19:10 -0600 (CST) Message-ID: <3AA7B13F.F918E1F8@ti.com> Date: Thu, 08 Mar 2001 09:20:15 -0700 From: Jeff Harrell X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Question concerning Assembler error Content-Type: multipart/mixed; boundary="------------45CDACA24C63474FA77065DA" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------45CDACA24C63474FA77065DA Content-Type: multipart/alternative; boundary="------------B15A6BD89F9960B889747A5E" --------------B15A6BD89F9960B889747A5E Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I am getting a strange error from the assembler that I am not quite sure what to make of it. Here is the Error and code snippet: >make mipsel-linux-gcc -D_ASSEMBLER_ -mcpu=r4600 -mips2 -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -G -0 -mno-abicalls -fno-pic -pipe -mlong-calls -Wimplicit -c avreset.S avreset.S: Assembler messages: avreset.S:262: Error: Rest of line ignored. First ignored character is `0'. avreset.S:1006: Error: Rest of line ignored. First ignored character is `0'. gmake: *** [avreset.o] Error 1 gmake: Target `all' not remade because of errors. And here is the code that seems to be causing the problem: /* Interrupt : For now we simply disable interrupts and return */ MFC0( k0, C0_STATUS) srl k0, 1 sll k0, 1 MTC0( k0, C0_STATUS) nop .set mips3 ==> eret <== .set mips2 nop Any information that anyone might have would be greatly appreciated. Regards, Jeff Harrell -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Jeff Harrell Work: (801) 619-6104 Broadband Access group/TI jharrell@ti.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --------------B15A6BD89F9960B889747A5E Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit I am getting a strange error from the assembler that I am not quite sure what to make of it.  Here
is the  Error and code snippet:
 
>make
mipsel-linux-gcc -D_ASSEMBLER_ -mcpu=r4600 -mips2 -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -G -0 -mno-abicalls -fno-pic -pipe -mlong-calls -Wimplicit -c avreset.S
avreset.S: Assembler messages:
avreset.S:262: Error: Rest of line ignored. First ignored character is `0'.
avreset.S:1006: Error: Rest of line ignored. First ignored character is `0'.
gmake: *** [avreset.o] Error 1
gmake: Target `all' not remade because of errors.
 

And here is the code that seems to be causing the problem:

   /* Interrupt : For now we simply disable interrupts and return */
 
        MFC0(   k0, C0_STATUS)
        srl     k0, 1
        sll     k0, 1
        MTC0(   k0, C0_STATUS)
        nop
        .set    mips3
==>  eret   <==
        .set    mips2
        nop
 

Any information that anyone might have would be greatly appreciated.

Regards,
Jeff Harrell

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Harrell                    Work:  (801) 619-6104 
Broadband Access group/TI       
jharrell@ti.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  --------------B15A6BD89F9960B889747A5E-- --------------45CDACA24C63474FA77065DA Content-Type: text/x-vcard; charset=us-ascii; name="jharrell.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jeff Harrell Content-Disposition: attachment; filename="jharrell.vcf" begin:vcard n:Harrell;Jeff tel;cell:(801) 597-6268 tel;fax:(801) 619-6150 tel;work:(801) 619-6104 x-mozilla-html:TRUE url:http://www.ti.com org:Broadband Access Group version:2.1 email;internet:jharrell@ti.com title:Texas Instruments adr;quoted-printable:;;170 West Election Rd. Suite 100 =0D=0AMS 4106 ;Draper;Utah;84020-6410;USA x-mozilla-cpt:;0 fn:Jeff Harrell end:vcard --------------45CDACA24C63474FA77065DA-- From owner-linux-mips@oss.sgi.com Thu Mar 8 08:30:39 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 08:30:29 -0800 Received: from haliga.physik.TU-Cottbus.De ([141.43.75.9]:53518 "HELO haliga.physik.tu-cottbus.de") by oss.sgi.com with SMTP id ; Thu, 8 Mar 2001 08:30:08 -0800 Received: by haliga.physik.tu-cottbus.de (Postfix, from userid 7215) id 81FDB8D66; Thu, 8 Mar 2001 17:30:03 +0100 (MET) Date: Thu, 8 Mar 2001 17:30:03 +0100 To: linux-mips@oss.sgi.com Subject: Re: Question concerning Assembler error Message-ID: <20010308173003.A17217@physik.tu-cottbus.de> Mail-Followup-To: heinold@physik.tu-cottbus.de, linux-mips@oss.sgi.com References: <3AA7B13F.F918E1F8@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: <3AA7B13F.F918E1F8@ti.com>; from jharrell@ti.com on Thu, Mar 08, 2001 at 09:20:15AM -0700 From: heinold@physik.tu-cottbus.de (H.Heinold) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 08, 2001 at 09:20:15AM -0700, Jeff Harrell wrote: > I am getting a strange error from the assembler that I am not quite sure > what to make of it. Here > is the Error and code snippet: > > > >make > mipsel-linux-gcc -D_ASSEMBLER_ -mcpu=r4600 -mips2 -Wall > -Wstrict-prototypes -O2 -fomit-frame-pointer -G -0 > -mno-abicalls -fno-pic -pipe -mlong-calls -Wimplicit -c Hm sorry cant help with the assembler problem, but which machine has a 4600 Prozessor and run mipsel on it? -- Henning Heinold From owner-linux-mips@oss.sgi.com Thu Mar 8 08:38:09 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 08:37:59 -0800 Received: from u-45-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.45]:55556 "EHLO u-45-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 08:37:52 -0800 Received: from dea ([193.98.169.28]:899 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Thu, 8 Mar 2001 17:37:33 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f28GbOG14462; Thu, 8 Mar 2001 17:37:24 +0100 Date: Thu, 8 Mar 2001 17:37:24 +0100 From: Ralf Baechle To: Jeff Harrell Cc: linux-mips@oss.sgi.com Subject: Re: Question concerning Assembler error Message-ID: <20010308173724.A11107@bacchus.dhis.org> References: <3AA7B13F.F918E1F8@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AA7B13F.F918E1F8@ti.com>; from jharrell@ti.com on Thu, Mar 08, 2001 at 09:20:15AM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 08, 2001 at 09:20:15AM -0700, Jeff Harrell wrote: > /* Interrupt : For now we simply disable interrupts and > return */ > > MFC0( k0, C0_STATUS) > srl k0, 1 > sll k0, 1 > MTC0( k0, C0_STATUS) > nop > .set mips3 > ==> eret <== > .set mips2 > nop > > > Any information that anyone might have would be greatly appreciated. I suggest to run this code through the preprocessor only using the -E -C options. The output will be somewhat cryptic but explain much better what's wrong. Ralf From owner-linux-mips@oss.sgi.com Thu Mar 8 08:41:29 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 08:41:09 -0800 Received: from u-45-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.45]:56324 "EHLO u-45-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 08:41:05 -0800 Received: from dea ([193.98.169.28]:1411 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Thu, 8 Mar 2001 17:40:50 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f28GeiX14498; Thu, 8 Mar 2001 17:40:44 +0100 Date: Thu, 8 Mar 2001 17:40:44 +0100 From: Ralf Baechle To: heinold@physik.tu-cottbus.de, linux-mips@oss.sgi.com Subject: Re: Question concerning Assembler error Message-ID: <20010308174044.B11107@bacchus.dhis.org> References: <3AA7B13F.F918E1F8@ti.com> <20010308173003.A17217@physik.tu-cottbus.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010308173003.A17217@physik.tu-cottbus.de>; from heinold@physik.tu-cottbus.de on Thu, Mar 08, 2001 at 05:30:03PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 08, 2001 at 05:30:03PM +0100, H.Heinold wrote: > Hm sorry cant help with the assembler problem, but which machine > has a 4600 Prozessor and run mipsel on it? RM200C. Ralf From owner-linux-mips@oss.sgi.com Thu Mar 8 08:44:09 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 08:43:59 -0800 Received: from enst.enst.fr ([137.194.2.16]:25324 "HELO enst.enst.fr") by oss.sgi.com with SMTP id ; Thu, 8 Mar 2001 08:43:39 -0800 Received: from email.enst.fr (muse.enst.fr [137.194.2.33]) by enst.enst.fr (Postfix) with ESMTP id E89431C956 for ; Thu, 8 Mar 2001 17:43:32 +0100 (MET) Received: from donjuan.enst.fr (donjuan.enst.fr [137.194.168.21]) by email.enst.fr (8.9.3/8.9.3) with ESMTP id RAA12807 for ; Thu, 8 Mar 2001 17:43:32 +0100 (MET) Received: from localhost (bellard@localhost) by donjuan.enst.fr (8.9.3+Sun/8.9.3) with SMTP id RAA09721 for ; Thu, 8 Mar 2001 17:43:31 +0100 (MET) Date: Thu, 8 Mar 2001 17:43:31 +0100 (MET) From: Fabrice Bellard To: linux-mips@oss.sgi.com Subject: mips gcc 2.95.2 and 2.91.66 bug In-Reply-To: <3AA7B13F.F918E1F8@ti.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi! Maybe this bug can interest you: when using byte swaping in le16_to_cpu for example, mips gcc 2.95.2 and 2.91.66 sometime do not generate correct code : the u16 to u32 convertion is missing. I found this bug while compiling drivers/mtd/ftl.c in build_maps(). Here is a sample source to reproduce the bug: typedef unsigned short __u16; extern __inline__ __const__ __u16 le16_to_cpu(__u16 x) { return ((__u16)( \ (((__u16)(x) & (__u16)0x00ffU) << 8) | \ (((__u16)(x) & (__u16)0xff00U) >> 8) )); } int test(int xtrans, int xvalid, __u16 *ptr) { if ((xvalid+xtrans != le16_to_cpu(*ptr))) { return -1; } return 0; } The generated asm is : test: .frame $sp,0,$31 # vars= 0, regs= 0/0, args= 0, extra= 0 .mask 0x00000000,0 .fmask 0x00000000,0 .set noreorder .cpload $25 .set reorder lhu $3,0($7) addu $5,$6,$5 sll $4,$3,8 srl $3,$3,8 or $4,$4,$3 .set noreorder .set nomacro bne $5,$4,$L7 li $2,-1 # 0xffffffff .set macro .set reorder move $2,$0 $L7: j $31 .end test The andi op is missing. egcs-1.0.3 seems to be OK. I have no experience in submitting gcc bugs, so if someone could forward this mail to the relevant gcc mailing list... Fabrice. From owner-linux-mips@oss.sgi.com Thu Mar 8 08:51:09 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 08:50:59 -0800 Received: from mx.mips.com ([206.31.31.226]:43233 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 08:50:48 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id IAA05178; Thu, 8 Mar 2001 08:50:47 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id IAA29098; Thu, 8 Mar 2001 08:50:44 -0800 (PST) Message-ID: <01b701c0a7f0$79260ba0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Ralf Baechle" , , References: <3AA7B13F.F918E1F8@ti.com> <20010308173003.A17217@physik.tu-cottbus.de> <20010308174044.B11107@bacchus.dhis.org> Subject: Re: Question concerning Assembler error Date: Thu, 8 Mar 2001 17:54:29 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > Hm sorry cant help with the assembler problem, but which machine > > has a 4600 Prozessor and run mipsel on it? > > RM200C. Actually, It's far more likely that Jeff is working with a MIPS 4KC or 5KC CPU core. -mcpu=r4600 ends up being the closest fit to the MIPS32 ISA and pipeline among the options available for the Linux-capable gcc compilers. Kevin K. From owner-linux-mips@oss.sgi.com Thu Mar 8 10:45:49 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 10:45:40 -0800 Received: from [216.163.184.10] ([216.163.184.10]:40478 "EHLO c1mailgw01.prontomail.com") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 10:45:15 -0800 Received: from c1web108 (216.163.184.10) by c1mailgw01.prontomail.com (NPlex 5.1.050) id 3AA76C0500006995 for linux-mips@oss.sgi.com; Thu, 8 Mar 2001 10:45:08 -0800 X-Version: tutopia 6.3.2073.11 From: "Hector Lara Gongora" Message-Id: <486229A00F315D115A660005B8CC4FF0@helago.tutopia.com> Date: Thu, 8 Mar 2001 12:46:52 -0600 X-Priority: Normal Content-Type: text/plain; charset=iso-8859-1 To: linux-mips@oss.sgi.com Subject: Indy R5000 X-Mailer: Web Based Pronto Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing To Anyone who can help me: I just get an Indy R5000, but the hard disk has been erased, so I don't have Irix either. I have used TurboLinux in a pc-based machine and now I want to use Linux in my Indy, but I don't know what download and how install it. Can anybody help me???? Thanks. Hector Lara ______________________________________________________________ E-mail y acceso a la Internet en http://www.Tutopia.com From owner-linux-mips@oss.sgi.com Thu Mar 8 16:19:31 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 16:19:21 -0800 Received: from u-49-20.karlsruhe.ipdial.viaginterkom.de ([62.180.20.49]:64004 "EHLO u-49-20.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 16:19:16 -0800 Received: from dea ([193.98.169.28]:27011 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Fri, 9 Mar 2001 01:18:59 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f290IrT22672; Fri, 9 Mar 2001 01:18:53 +0100 Date: Fri, 9 Mar 2001 01:18:53 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: , Subject: Re: Question concerning Assembler error Message-ID: <20010309011853.E21844@bacchus.dhis.org> References: <3AA7B13F.F918E1F8@ti.com> <20010308173003.A17217@physik.tu-cottbus.de> <20010308174044.B11107@bacchus.dhis.org> <01b701c0a7f0$79260ba0$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <01b701c0a7f0$79260ba0$0deca8c0@Ulysses>; from kevink@mips.com on Thu, Mar 08, 2001 at 05:54:29PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 08, 2001 at 05:54:29PM +0100, Kevin D. Kissell wrote: > > > Hm sorry cant help with the assembler problem, but which machine > > > has a 4600 Prozessor and run mipsel on it? > > > > RM200C. > > Actually, It's far more likely that Jeff is working with a > MIPS 4KC or 5KC CPU core. -mcpu=r4600 ends up > being the closest fit to the MIPS32 ISA and pipeline > among the options available for the Linux-capable > gcc compilers. Maybe your answer is right, but then the question is wrong :-) Ralf From owner-linux-mips@oss.sgi.com Thu Mar 8 18:29:03 2001 Received: by oss.sgi.com id ; Thu, 8 Mar 2001 18:28:53 -0800 Received: from ns5.Sony.CO.JP ([202.238.80.5]:61700 "EHLO ns5.sony.co.jp") by oss.sgi.com with ESMTP id ; Thu, 8 Mar 2001 18:28:42 -0800 Received: from mail2.sony.co.jp (gatekeeper8.Sony.CO.JP [202.238.80.22]) by ns5.sony.co.jp (R8) with ESMTP id f292Se354688; Fri, 9 Mar 2001 11:28:40 +0900 (JST) Received: from mail2.sony.co.jp (localhost [127.0.0.1]) by mail2.sony.co.jp (R8) with ESMTP id f292SeY15344; Fri, 9 Mar 2001 11:28:40 +0900 (JST) Received: from smail1.sm.sony.co.jp (smail1.sm.sony.co.jp [43.11.253.1]) by mail2.sony.co.jp (R8) with ESMTP id f292Sev15336; Fri, 9 Mar 2001 11:28:40 +0900 (JST) Received: from imail.sm.sony.co.jp (imail.sm.sony.co.jp [43.27.209.5]) by smail1.sm.sony.co.jp (8.8.8/3.6W) with ESMTP id LAA03188; Fri, 9 Mar 2001 11:28:42 +0900 (JST) Received: from mach0.sm.sony.co.jp (mach0.sm.sony.co.jp [43.27.210.135]) by imail.sm.sony.co.jp (8.8.8/3.7W) with ESMTP id LAA10517; Fri, 9 Mar 2001 11:28:08 +0900 (JST) Received: from localhost by mach0.sm.sony.co.jp (8.8.8/FreeBSD) with ESMTP id LAA14074; Fri, 9 Mar 2001 11:28:08 +0900 (JST) To: bellard@email.enst.fr Cc: linux-mips@oss.sgi.com Subject: Re: mips gcc 2.95.2 and 2.91.66 bug In-Reply-To: References: <3AA7B13F.F918E1F8@ti.com> X-Mailer: Mew version 1.94.1 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA) Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20010309112808P.machida@sm.sony.co.jp> Date: Fri, 09 Mar 2001 11:28:08 +0900 From: Hiroyuki Machida X-Dispatcher: imput version 990905(IM130) Lines: 29 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing From: Fabrice Bellard Subject: mips gcc 2.95.2 and 2.91.66 bug Date: Thu, 8 Mar 2001 17:43:31 +0100 (MET) > Hi! > > Maybe this bug can interest you: when using byte swaping in le16_to_cpu > for example, mips gcc 2.95.2 and 2.91.66 sometime do not generate correct > code : the u16 to u32 convertion is missing. I found this bug while > compiling drivers/mtd/ftl.c in build_maps(). Here is a sample source to > reproduce the bug: This bug is fixed by following chage in GCC 3.0. gcc/gcc/ChangeLog.3: 2000-04-24 Hiroyuki Machida * combine.c (try_combine): Update reg_nonzero_bits of newi2pat before newpat. Please refer mail archives at gcc.gnu.org for details. You can easily apply this fix to gcc-2.95.x. --- Hiroyuki Machida Creative Station SCE Inc. From owner-linux-mips@oss.sgi.com Fri Mar 9 10:56:02 2001 Received: by oss.sgi.com id ; Fri, 9 Mar 2001 10:55:43 -0800 Received: from boco.fee.vutbr.cz ([147.229.9.11]:44305 "EHLO boco.fee.vutbr.cz") by oss.sgi.com with ESMTP id ; Fri, 9 Mar 2001 10:55:29 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f29ItJt60238 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Fri, 9 Mar 2001 19:55:20 +0100 (CET) Received: (from xjezda00@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f29It5H34487; Fri, 9 Mar 2001 19:55:05 +0100 (CET) Date: Fri, 9 Mar 2001 19:55:05 +0100 From: David Jez To: Carsten Langgaard Cc: ppopov@pacbell.net, Pete Popov , Ralf Baechle , David Jez , linux-mips@oss.sgi.com Subject: Re: redhat 7.0 Message-ID: <20010309195505.C34241@stud.fee.vutbr.cz> References: <3A901B3F.ADADC601@pacbell.net> <20010220074903.A68652@stud.fee.vutbr.cz> <20010220215616.F2086@bacchus.dhis.org> <3A930AB3.3AEAE5BF@mvista.com> <3AA5FA06.D9D5277@mips.com> <3AA63113.45430090@pacbell.net> <3AA76955.2819476F@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AA76955.2819476F@mips.com>; from carstenl@mips.com on Thu, Mar 08, 2001 at 12:13:25PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Carsten, try this: 1. install package rpm-3.0.5 from last rh-6.2 updates 2. then install package rpm-4.0.4 this may will be OK, because rpm-3.0.5 know rpm-4 packages format. Try read this, but I'm afraid you will not understand: http://www.linux.cz/lists/archive/linux/101281.html good luck Dave > Please Ralf, could you help me here. > I did the same as Pete describe below, and I got the same result. > When I tried "rpm --rebuilddb" it fails because it couldn't find some libraries. > The rpm-tarball contains a statically linked rpm binary, but rpmdb is dynamically > linked, could you please provide me with a statically linked rpmdb binary, that would > be great. > > > Did you managed to get through the installation of the RedHat 7.0 packages ? > > > I would like to do something similar. > > > > > > > Has anyone tried installing 7.0 that's on oss.sgi.com? The problem I'm > > > > > > > running into is that after I netboot and mount simple-0.2b as the root > > > > > > > fs, and install the rpm-4.0 tarball, rpm doesn't work with the > > > > > > > libraries, or lack of, of that root fs. It looks like I need an fs with > > > > > > > a working rpm-4.0, so that I can mount my second disk somewhere and > > > > > > > install the 7.0 packages. Any suggestions? > > > > > > Yes, > > > > > > If you download rpm-3.0 (I'm not sure, try get newer version) you'll should > > > > > > be able to work with rpm 4 packages. -- ------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: dave.jez@seznam.cz PGP key: finger xjezda00@fest.stud.fee.vutbr.cz ---------=[ ~EOF ]=------------------------------------ From owner-linux-mips@oss.sgi.com Fri Mar 9 11:27:02 2001 Received: by oss.sgi.com id ; Fri, 9 Mar 2001 11:26:53 -0800 Received: from u-234-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.234]:16389 "EHLO u-234-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 9 Mar 2001 11:26:32 -0800 Received: from dea ([193.98.169.28]:47504 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Fri, 9 Mar 2001 20:24:43 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f29Gwo312408; Fri, 9 Mar 2001 17:58:50 +0100 Date: Fri, 9 Mar 2001 17:58:50 +0100 From: Ralf Baechle To: Keith M Wesolowski Cc: Steven Liu , linux-mips@oss.sgi.com Subject: Re: mips-tfile Message-ID: <20010309175850.C8389@bacchus.dhis.org> References: <000801c0a572$b7471e40$dde0490a@BANANA> <20010305205516.A25870@foobazco.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010305205516.A25870@foobazco.org>; from wesolows@foobazco.org on Mon, Mar 05, 2001 at 08:55:16PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 05, 2001 at 08:55:16PM -0800, Keith M Wesolowski wrote: > random "3D" in your output there is either another source of trouble > or an artifact of your mailer; in either case it should be fixed. quoted-unprintable. Considered evil. Ralf From owner-linux-mips@oss.sgi.com Fri Mar 9 11:34:52 2001 Received: by oss.sgi.com id ; Fri, 9 Mar 2001 11:34:32 -0800 Received: from u-115-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.115]:20485 "EHLO u-115-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 9 Mar 2001 11:34:20 -0800 Received: from dea ([193.98.169.28]:49808 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Fri, 9 Mar 2001 20:34:04 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f29HFM512501; Fri, 9 Mar 2001 18:15:22 +0100 Date: Fri, 9 Mar 2001 18:15:21 +0100 From: Ralf Baechle To: "Steven Liu" Cc: , zmailer@nic.funet.fi Subject: Scrabled headers, was: Re: mips-tfile Message-ID: <20010309181521.D8389@bacchus.dhis.org> References: <000801c0a572$b7471e40$dde0490a@BANANA> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <000801c0a572$b7471e40$dde0490a@BANANA>; from stevenliu@psdc.com on Mon, Mar 05, 2001 at 04:49:28AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Looking more at this posting, a blank line has been inserted into the headers, thereby turning some of the headers into a part of the body. This also explains why we saw this `3D' things sprinkled all over Steven's posting. This is not a bug I've observed before with MS Outlaw which Steven is using and our Majorodom also shouldn't be guilty. Would leave the somewhat older version of Zmailer we're running on oss as one of the suspects. Matti, have you ever seen blank lines inserted like this? X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-Orcpt: rfc822;linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 4303 Lines: 126 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, All: Hi, All: [...] Ralf From owner-linux-mips@oss.sgi.com Sat Mar 10 09:50:25 2001 Received: by oss.sgi.com id ; Sat, 10 Mar 2001 09:50:15 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:19976 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sat, 10 Mar 2001 09:50:09 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 920817F6; Sat, 10 Mar 2001 18:49:57 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 9D511EFA8; Sat, 10 Mar 2001 20:50:28 +0100 (CET) Date: Sat, 10 Mar 2001 20:50:28 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: Failure 2.4.2 + glibc 2.2 still illegal instruction Message-ID: <20010310205028.B16121@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, i am still seeing illegal instruction stuff with current cvs kernel and glibc 2.2 Basically all glibc 2.2 compiled binary crash with illegal instruction: resume.rfc822.org login: root Password: Last login: Sat Mar 10 17:42:25 2001 on ttyS0 Linux resume.rfc822.org 2.4.2 #2 Sat Mar 10 20:37:49 CET 2001 mips unknown Most of the programs included with the Debian GNU/Linux system are freely redistributable; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. warning: things are broken at the moment. Fixes in progress. you'd be best to try again later. :) You have mail. resume:~# find [find:190] Illegal instruction 7f454c46 at 2ac9e000 ra=2ab166c4 Illegal instruction resume:~# ls [ls:191] Illegal instruction 0100017c at 2ac9688c ra=00000000 Illegal instruction resume:~# sleep 1 [sleep:192] Illegal instruction 0100017c at 2ad0788c ra=00000000 Illegal instruction resume:~# find [find:193] Illegal instruction 7f454c46 at 2ac9e000 ra=2ab166c4 Illegal instruction resume:~# find [find:194] Illegal instruction 7f454c46 at 2ac9e000 ra=2ab166c4 Illegal instruction resume:~# sleep [sleep:195] Illegal instruction 0100017c at 2ad0788c ra=00000000 Illegal instruction resume:~# sleep [sleep:196] Illegal instruction 0100017c at 2ad0788c ra=00000000 Illegal instruction resume:~# sleep [sleep:197] Illegal instruction 0100017c at 2ad0788c ra=00000000 Illegal instruction resume:~# strace shows that the last system call called is "sysmips(MIPS_ATOMIC_SET, ...)" So long Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sat Mar 10 09:50:45 2001 Received: by oss.sgi.com id ; Sat, 10 Mar 2001 09:50:26 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:19720 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sat, 10 Mar 2001 09:50:09 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 6CAE57D9; Sat, 10 Mar 2001 18:49:57 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 2E04BEFA8; Sat, 10 Mar 2001 20:47:00 +0100 (CET) Date: Sat, 10 Mar 2001 20:47:00 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: Success Kernel 2.4.2 (20010310) on SGI I2 Message-ID: <20010310204700.A16121@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, success for booting current cvs 2.4.2 on the I2 >> bootp():vmlinux-ip22 console=ttyS0 root=/dev/sda1 Setting $netaddr to 195.71.99.220 (from server watchdog) Obtaining vmlinux-ip22 from server watchdog ARCH: SGI-IP22 PROMLIB: ARC firmware Version 1 Revision 10 CPU: MIPS-R4400 FPU ICACHE DCACHE SCACHE Loading R4000 MMU routines. CPU revision is: 00000460 Primary instruction cache 16kb, linesize 16 bytes. Primary data cache 16kb, linesize 16 bytes. Secondary cache sized at 2048K linesize 128 bytes. Linux version 2.4.2 (flo@paradigm) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #2 Sat Mar 10 20:37:49 CET 2001 MC: SGI memory controller Revision 3 Determined physical RAM map: memory: 00001000 @ 00000000 (reserved) memory: 00001000 @ 00001000 (reserved) memory: 0019e000 @ 08002000 (reserved) memory: 005a0000 @ 081a0000 (usable) memory: 000c0000 @ 08740000 (ROM data) memory: 07800000 @ 08800000 (usable) On node 0 totalpages: 65536 zone(0): 65536 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/sda1 Calibrating system timer... 1250000 [250.00 MHz CPU] Console: colour dummy device 80x25 zs0: console input Console: ttyS0 (Zilog8530) Calibrating delay loop... 124.51 BogoMIPS Memory: 124232k/128640k available (1354k kernel code, 4408k reserved, 79k data, 64k init) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 initialize_kbd: Keyboard failed self test pty: 256 Unix98 ptys configured keyboard: Timeout - AT keyboard not present? keyboard: Timeout - AT keyboard not present? DS1286 Real Time Clock Driver v1.0 streamable misc devices registered (keyb:150, gfx:148) block: queued sectors max/low 82264kB/27421kB, 256 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: enabling 8 loop devices sgiseeq.c: David S. Miller (dm@engr.sgi.com) eth0: SGI Seeq8003 08:00:69:0a:04:b9 SCSI subsystem driver Revision: 1.00 wd33c93-0: chip=WD33c93B/13 no_sync=0xff no_dma=0 debug_flags=0x00 setup_args=,,,,,,,,, Version 1.25 - 09/Jul/1997, Compiled Mar 10 2001 at 20:35:32 wd33c93-1: chip=WD33c93B/13 no_sync=0xff no_dma=0 debug_flags=0x00 setup_args=,,,,,,,,, Version 1.25 - 09/Jul/1997, Compiled Mar 10 2001 at 20:35:32 scsi0 : SGI WD93 scsi1 : SGI WD93 sending SDTR 0103013f0csync_xfer=2c Vendor: SGI Model: QUANTUM XP32150 Rev: S89C Type: Direct-Access ANSI SCSI revision: 02 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 sending SDTR 0103013f0csync_xfer=2c Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 1, lun 0 Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0 Detected scsi disk sdc at scsi1, channel 0, id 2, lun 0 Detected scsi disk sdd at scsi1, channel 0, id 3, lun 0 Detected scsi disk sde at scsi1, channel 0, id 4, lun 0 Detected scsi disk sdf at scsi1, channel 0, id 5, lun 0 Detected scsi disk sdg at scsi1, channel 0, id 6, lun 0 SCSI device sda: 4404489 512-byte hdwr sectors (2255 MB) Partition check: sda: sda1 sda2 sda3 sda4 SCSI device sdb: 8386733 512-byte hdwr sectors (4294 MB) sdb: sdb1 sdb2 sdb3 sdb4 SCSI device sdc: 8386733 512-byte hdwr sectors (4294 MB) sdc: sdc1 sdc2 sdc3 sdc4 SCSI device sdd: 8386733 512-byte hdwr sectors (4294 MB) sdd: sdd1 sdd2 sdd3 sdd4 SCSI device sde: 8386733 512-byte hdwr sectors (4294 MB) sde: sde1 sde2 sde3 sde4 SCSI device sdf: 8386733 512-byte hdwr sectors (4294 MB) sdf: sdf1 SCSI device sdg: 8386733 512-byte hdwr sectors (4294 MB) sdg: sdg1 SGI Zilog8530 serial driver version 1.00 tty00 at 0xbfbd9830 (irq = 21) is a Zilog8530 tty01 at 0xbfbd9838 (irq = 21) is a Zilog8530 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 195.71.99.222, my address is 195.71.99.220 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing prom memory: 768kb freed Freeing unused kernel memory: 64k freed Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sat Mar 10 11:07:15 2001 Received: by oss.sgi.com id ; Sat, 10 Mar 2001 11:07:06 -0800 Received: from u-152-20.karlsruhe.ipdial.viaginterkom.de ([62.180.20.152]:37381 "EHLO u-152-20.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sat, 10 Mar 2001 11:06:44 -0800 Received: from dea ([193.98.169.28]:1427 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Sat, 10 Mar 2001 20:06:29 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2AIPwo20402; Sat, 10 Mar 2001 19:25:58 +0100 Date: Sat, 10 Mar 2001 19:25:58 +0100 From: Ralf Baechle To: nick@snowman.net, linux-mips@oss.sgi.com Subject: Re: Problem makeing an O2 run bootp Message-ID: <20010310192557.E15966@bacchus.dhis.org> References: <20010306135856.E1184@bacchus.dhis.org> <20010308025751.G5830@hork> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010308025751.G5830@hork>; from csr6702@grace.rit.edu on Thu, Mar 08, 2001 at 02:57:51AM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Mar 08, 2001 at 02:57:51AM -0500, Chris Ruvolo wrote: > On Tue, Mar 06, 2001 at 10:36:45PM -0500, nick@snowman.net wrote: > > I've got an o2 that I'm trying to make netboot, and it seems to work, > > however the o2 never acks the tftp packets. The tcpdump is attached. If > > anyone has suggestions/ideas I'd love to hear them. I booted the o2 and > > ran "bootp():" from the arc prompt. > > I had the same problem with my Indy. I think this is in the HOWTO now, but > in case you missed it.. If you are running your tftpd on Linux >= 2.3.x > > echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc > > Worked for me. Yep, it's in there: 7.6. My machine doesn't download the kernel when I try to netboot Your machine is replying to the BOOTP packets (you may verify this using a packet sniffer like tcpdump or ethereal), but doesn't download the kernel from your BOOTP server. This happens if your boot server is running a kernel of the 2.3 series or higher. The problem may be circumvented by doing a "echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc" as root on your boot server. Ralf From owner-linux-mips@oss.sgi.com Sat Mar 10 12:34:26 2001 Received: by oss.sgi.com id ; Sat, 10 Mar 2001 12:34:06 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:18628 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Sat, 10 Mar 2001 12:34:00 -0800 Received: from scotty.mgnet.de (pD4B89498.dip.t-dialin.net [212.184.148.152]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id VAA12100 for ; Sat, 10 Mar 2001 21:33:57 +0100 (MET) Received: (qmail 30521 invoked from network); 10 Mar 2001 20:33:56 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 10 Mar 2001 20:33:56 -0000 Date: Sat, 10 Mar 2001 21:34:00 +0100 (CET) From: Klaus Naumann To: Florian Lohoff cc: linux-mips@oss.sgi.com Subject: Re: Failure 2.4.2 + glibc 2.2 still illegal instruction In-Reply-To: <20010310205028.B16121@paradigm.rfc822.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 10 Mar 2001, Florian Lohoff wrote: > > Hi, > i am still seeing illegal instruction stuff with current cvs kernel > and glibc 2.2 > I can confirm this on my Indigo2. Altough not every binary crashes. From my dmesg: [ls:38] Illegal instruction 0100017c at 2ac9388c ra=00000000 [ls:39] Illegal instruction 0100017c at 2ac9388c ra=00000000 [find:88] Illegal instruction 7fff7ccc at 2ac97c60 ra=2ab136c4 [find:91] Illegal instruction 00000003 at 2ac9673c ra=2ab136c4 [find:93] Illegal instruction 00000017 at 2ac97c5c ra=2ab136c4 [ls:144] Illegal instruction 0100017c at 2ac9388c ra=00000000 [ls:145] Illegal instruction 0100017c at 2ac9388c ra=00000000 I have also seen these things with tar and other stuff. Anyway - Keith said that it went away after he compiled glibc against 2.4.X (X > 1) kernel sources. Can anyone confirm that ? > strace shows that the last system call called is > "sysmips(MIPS_ATOMIC_SET, ...)" I have tried building strace but failed. What is your code base ? CU, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Sun Mar 11 05:54:14 2001 Received: by oss.sgi.com id ; Sun, 11 Mar 2001 05:54:04 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:55057 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 11 Mar 2001 05:53:47 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id D38617F6; Sun, 11 Mar 2001 14:53:34 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 59FA7EFC1; Sun, 11 Mar 2001 16:52:08 +0100 (CET) Date: Sun, 11 Mar 2001 16:52:08 +0100 From: Florian Lohoff To: Klaus Naumann Cc: linux-mips@oss.sgi.com Subject: Re: Failure 2.4.2 + glibc 2.2 still illegal instruction Message-ID: <20010311165208.C7415@paradigm.rfc822.org> References: <20010310205028.B16121@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from spock@mgnet.de on Sat, Mar 10, 2001 at 09:34:00PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Mar 10, 2001 at 09:34:00PM +0100, Klaus Naumann wrote: > On Sat, 10 Mar 2001, Florian Lohoff wrote: > I have also seen these things with tar and other stuff. > Anyway - Keith said that it went away after he compiled > glibc against 2.4.X (X > 1) kernel sources. Can > anyone confirm that ? > > > strace shows that the last system call called is > > "sysmips(MIPS_ATOMIC_SET, ...)" > > I have tried building strace but failed. What is your code base ? I am still using the very old strace 3.2 from the cobalt distribution which is aehm - complicated - as i wont decode everything and some things even wrong. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sun Mar 11 08:17:05 2001 Received: by oss.sgi.com id ; Sun, 11 Mar 2001 08:16:46 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:5125 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 11 Mar 2001 08:16:22 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 4A3607FE; Sun, 11 Mar 2001 17:16:10 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id A0176EFC1; Sun, 11 Mar 2001 19:16:39 +0100 (CET) Date: Sun, 11 Mar 2001 19:16:39 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: Illegal instruction - a workaround or fix ? Message-ID: <20010311191639.A8587@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, i seem to get the illegal instruction stuff killed when doing this. diff -u -r1.17 sysmips.c --- arch/mips/kernel/sysmips.c 2001/02/09 21:05:46 1.17 +++ arch/mips/kernel/sysmips.c 2001/03/11 16:11:30 @@ -111,13 +111,14 @@ ((struct pt_regs *)&cmd)->regs[2] = tmp; ((struct pt_regs *)&cmd)->regs[7] = 0; - +#if 0 __asm__ __volatile__( "move\t$29, %0\n\t" "j\to32_ret_from_sys_call" : /* No outputs */ : "r" (&cmd)); /* Unreached */ +#endif } case MIPS_FIXADE: Could someone please explain me the difference betweeen "handle_sys" which leads to "o32_ret_from_sys_call" and ... which leads to "ret_from_sys_call". Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sun Mar 11 17:09:30 2001 Received: by oss.sgi.com id ; Sun, 11 Mar 2001 17:09:20 -0800 Received: from ns.snowman.net ([63.80.4.34]:64011 "EHLO ns.snowman.net") by oss.sgi.com with ESMTP id ; Sun, 11 Mar 2001 17:09:04 -0800 Received: from localhost (nick@localhost) by ns.snowman.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id UAA06952 for ; Sun, 11 Mar 2001 20:09:00 -0500 Date: Sun, 11 Mar 2001 20:09:00 -0500 (EST) From: X-Sender: nick@ns To: linux-mips@oss.sgi.com Subject: IP32 (O2) diff In-Reply-To: <20010310192557.E15966@bacchus.dhis.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing http://www.snowman.net/~nick/ip32.diff.bz2 The above is a link to my patch against the current CVS source that sort of works on the SGI O2. It boots, but does not support any consoles, SCSI drivers, or ethernet drivers. Any assistance is greatly apreiciated. Nick From owner-linux-mips@oss.sgi.com Mon Mar 12 03:37:05 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 03:36:55 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:37900 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 03:36:52 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K13YDZ2K8I000ICL@research.kpn.com> for linux-mips@oss.sgi.com; Mon, 12 Mar 2001 12:36:50 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id MAA22025 for linux-mips@oss.sgi.com; Mon, 12 Mar 2001 12:34:35 +0100 (MET) Date: Mon, 12 Mar 2001 12:34:35 +0100 (MET) From: vhouten@kpn.com Subject: RH 7.0 based root tarball. To: linux-mips@oss.sgi.com Message-id: <200103121134.MAA22025@sparta.research.kpn.com> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi all, I've uploaded a RedHat 7.0 based root tarball. It can serve as NFS root image, or for local disk installs. It can be found at oss: ftp://oss.sgi.com/pub/linux/mips/redhat/test-7.0/mipsroot-rh7.tar.bz2 Good luck, Karel van Houten vhouten@kpn.com From owner-linux-mips@oss.sgi.com Mon Mar 12 03:42:05 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 03:41:46 -0800 Received: from mail.sonytel.be ([193.74.243.200]:47825 "EHLO mail.sonytel.be") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 03:41:32 -0800 Received: from escobaria.sonytel.be (escobaria.sonytel.be [10.34.80.3]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id MAA18476; Mon, 12 Mar 2001 12:41:03 +0100 (MET) Date: Mon, 12 Mar 2001 12:41:03 +0100 (MET) From: Geert Uytterhoeven To: vhouten@kpn.com cc: linux-mips@oss.sgi.com Subject: Re: RH 7.0 based root tarball. In-Reply-To: <200103121134.MAA22025@sparta.research.kpn.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 12 Mar 2001 vhouten@kpn.com wrote: > I've uploaded a RedHat 7.0 based root tarball. It can serve > as NFS root image, or for local disk installs. > It can be found at oss: > ftp://oss.sgi.com/pub/linux/mips/redhat/test-7.0/mipsroot-rh7.tar.bz2 Is it big or little endian? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Mon Mar 12 03:50:05 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 03:49:56 -0800 Received: from u-21-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.21]:64262 "EHLO u-21-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 03:49:52 -0800 Received: from dea ([193.98.169.28]:896 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Mon, 12 Mar 2001 12:49:28 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2CBLYe06247; Mon, 12 Mar 2001 12:21:34 +0100 Date: Mon, 12 Mar 2001 12:21:34 +0100 From: Ralf Baechle To: Florian Lohoff Cc: linux-mips@oss.sgi.com Subject: Re: Illegal instruction - a workaround or fix ? Message-ID: <20010312122134.B1235@bacchus.dhis.org> References: <20010311191639.A8587@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010311191639.A8587@paradigm.rfc822.org>; from flo@rfc822.org on Sun, Mar 11, 2001 at 07:16:39PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Thanks, that was the hint I needed. o32_ret_from_sys_call expects the content of s-registers to be unchanged from userspace but sys_sysmips clobbers them. Below a patch from the famous ``Smoke This, It's Good For You (TM)'' series. Lemme know if it helps. Ralf --- arch/mips/kernel/sysmips.c 2001/02/09 21:05:46 1.17 +++ arch/mips/kernel/sysmips.c 2001/03/12 11:12:20 @@ -19,6 +19,7 @@ #include #include +#include #include #include @@ -47,8 +48,9 @@ return address; } -asmlinkage int -sys_sysmips(int cmd, int arg1, int arg2, int arg3) +save_static_function(sys_sysmips); +static_unused int +_sys_sysmips(int cmd, int arg1, int arg2, int arg3) { int *p; char *name; @@ -114,7 +116,7 @@ __asm__ __volatile__( "move\t$29, %0\n\t" - "j\to32_ret_from_sys_call" + "j\to32_ret_from_sys_call_restore_static" : /* No outputs */ : "r" (&cmd)); /* Unreached */ --- arch/mips/kernel/scall_o32.S 2000/08/08 18:54:49 1.14 +++ arch/mips/kernel/scall_o32.S 2001/03/12 11:09:12 @@ -86,6 +86,10 @@ RESTORE_SOME RESTORE_SP_AND_RET +EXPORT(o32_ret_from_sys_call_restore_static) + RESTORE_STATIC + j o32_ret_from_sys_call + o32_handle_softirq: jal do_softirq b 9b From owner-linux-mips@oss.sgi.com Mon Mar 12 03:50:35 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 03:50:15 -0800 Received: from u-21-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.21]:64262 "EHLO u-21-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 03:50:05 -0800 Received: from dea ([193.98.169.28]:1664 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Mon, 12 Mar 2001 12:49:38 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2C9n3201304; Mon, 12 Mar 2001 10:49:03 +0100 Date: Mon, 12 Mar 2001 10:49:03 +0100 From: Ralf Baechle To: Klaus Naumann Cc: Florian Lohoff , linux-mips@oss.sgi.com Subject: Re: Failure 2.4.2 + glibc 2.2 still illegal instruction Message-ID: <20010312104903.A1235@bacchus.dhis.org> References: <20010310205028.B16121@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from spock@mgnet.de on Sat, Mar 10, 2001 at 09:34:00PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Mar 10, 2001 at 09:34:00PM +0100, Klaus Naumann wrote: > > strace shows that the last system call called is > > "sysmips(MIPS_ATOMIC_SET, ...)" > > I have tried building strace but failed. What is your code base ? What is the sympthom? I've tried strace from CVS on a mips64 kernel and it works almost perfectly. Ralf From owner-linux-mips@oss.sgi.com Mon Mar 12 04:10:05 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 04:09:56 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:44301 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 04:09:36 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K13ZII2B8I000JEA@research.kpn.com> for linux-mips@oss.sgi.com; Mon, 12 Mar 2001 13:09:31 +0100 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) with ESMTP id NAA22587; Mon, 12 Mar 2001 13:09:30 +0100 (MET) Date: Mon, 12 Mar 2001 13:09:30 +0100 From: "Houten K.H.C. van (Karel)" X-Face: ";:TzQQC{mTp~$W,'m4@Lu1Lu$rtG_~5kvYO~F:C'KExk9o1X"iRz[0%{bq?6Aj#>VhSD?v 1W9`.Qsf+P&*iQEL8&y,RDj&U.]!(R-?c-h5h%Iw%r$|%6+Jc>GTJe!_1&A0o'lC[`I#={2BzOXT1P q366I$WL=;[+SDo1RoIT+a}_y68Y:jQ^xp4=*4-ryiymi>hy Subject: Re: RH 7.0 based root tarball. In-reply-to: "Your message of Mon, 12 Mar 2001 12:41:03 +0100." To: Geert Uytterhoeven Cc: vhouten@kpn.com, linux-mips@oss.sgi.com Reply-to: K.H.C.vanHouten@kpn.com Message-id: <200103121209.NAA22587@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: exmh version 1.6.5 12/11/95 Content-type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Geert wrote: > On Mon, 12 Mar 2001 vhouten@kpn.com wrote: > > I've uploaded a RedHat 7.0 based root tarball. It can serve > > as NFS root image, or for local disk installs. > > It can be found at oss: > > ftp://oss.sgi.com/pub/linux/mips/redhat/test-7.0/mipsroot-rh7.tar.bz2 > > Is it big or little endian? I't the mipsroot, not the mipselroot :-) Regards, Karel. -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Mon Mar 12 05:43:39 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 05:43:19 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:10758 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 12 Mar 2001 05:43:14 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id A65C57FE; Mon, 12 Mar 2001 14:43:02 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 62D17EFD0; Mon, 12 Mar 2001 14:41:31 +0100 (CET) Date: Mon, 12 Mar 2001 14:41:31 +0100 From: Florian Lohoff To: Ralf Baechle Cc: linux-mips@oss.sgi.com Subject: Re: Illegal instruction - a workaround or fix ? Message-ID: <20010312144131.C7715@paradigm.rfc822.org> References: <20010311191639.A8587@paradigm.rfc822.org> <20010312122134.B1235@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010312122134.B1235@bacchus.dhis.org>; from ralf@oss.sgi.com on Mon, Mar 12, 2001 at 12:21:34PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 12, 2001 at 12:21:34PM +0100, Ralf Baechle wrote: > Thanks, that was the hint I needed. o32_ret_from_sys_call expects the > content of s-registers to be unchanged from userspace but sys_sysmips > clobbers them. > > Below a patch from the famous ``Smoke This, It's Good For You (TM)'' > series. Lemme know if it helps. As mentioned on IRC - This "Oopses" for me ... Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Mar 12 07:40:29 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 07:40:10 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:57095 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 12 Mar 2001 07:39:58 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 249C07F6; Mon, 12 Mar 2001 16:39:47 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 317C2EFD0; Mon, 12 Mar 2001 16:39:38 +0100 (CET) Date: Mon, 12 Mar 2001 16:39:38 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Cc: Andreas Jaeger Subject: glibc 2.2.2 on linux mips kernel 2.2 NOGO Message-ID: <20010312163938.E7715@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I tried building glibc 2.2.2 on Linux-mips (Kernel 2.2.16) with no success. I was using Keiths cross stuff to determin the way it worked for him. I am getting the following output. ./configure --prefix=/usr --with-headers=/usr/src/linux/include/ --enable-kernel=2.2.15 --enable-add-ons --with-elf --disable-profile Results in: ../elf/ld.so.1 --library-path ..:../math:../elf:../dlfcn:../nss:../nis:../rt:../resolv:../crypt:../linuxthreads ./rpcgen -Y `gcc -print-file-name=cpp | sed 's|/cpp$||'` -c rpcsvc/bootparam_prot.x -o xbootparam_prot.T make[1]: *** [xbootparam_prot.stmp] Segmentation fault The same happens when i remove the "--enable-kernel=2.2.15" completely. In case i am using an "--enable-kernel=2.3.99" i am getting TOO OLD KERNEL I was using flo@repeat:~/glibc-2.2.2$ gcc -v Reading specs from /home/flo/gcc-3.0/lib/gcc-lib/mipsel-unknown-linux-gnu/3.0/specs Configured with: ./configure --prefix=/home/flo/gcc-3.0 --with-newlib --disable-shared --enable-languages=c gcc version 3.0 20010303 (prerelease) flo@repeat:~/glibc-2.2.2$ ld -v GNU ld version 2.11.90 (with BFD 2.11.90) flo@repeat:~/glibc-2.2.2$ head /usr/src/linux/include/linux/version.h #define UTS_RELEASE "2.4.2" #define LINUX_VERSION_CODE 132098 #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) flo@repeat:~/glibc-2.2.2$ uname -a Linux repeat.rfc822.org 2.2.16 #42 Fri Dec 29 11:46:41 CET 2000 mips unknown Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Mar 12 09:49:10 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 09:48:50 -0800 Received: from [207.81.221.34] ([207.81.221.34]:54324 "EHLO relay") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 09:48:46 -0800 Received: from vcubed.com ([207.81.96.153]) by relay (8.8.7/8.8.7) with ESMTP id OAA05822 for ; Mon, 12 Mar 2001 14:11:14 -0500 Message-ID: <3AAD0CB9.FAE7C050@vcubed.com> Date: Mon, 12 Mar 2001 12:51:53 -0500 From: Dan Aizenstros X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: Error in set_cp0_ functions Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello All, There appears to be an error in the new set_cp0_ functions in the mipsregs.h file. #define __BUILD_SET_CP0(name,register) \ extern __inline__ unsigned int \ set_cp0_##name(unsigned int set) \ { \ unsigned int res; \ \ res = read_32bit_cp0_register(register); \ res |= ~set; \ write_32bit_cp0_register(register, res); \ \ return res; \ } \ The line res |= ~set; will set every bit except the bit you want to set. It should be changed to res |= set; Also in the mipsregs.h file the line #define ST0_UM <1 << 4) should probably be #define ST0_UM (1 << 4) I hope this helps. Dan Aizenstros Software Engineer V3 Semiconductor Corp. From owner-linux-mips@oss.sgi.com Mon Mar 12 11:44:30 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 11:44:11 -0800 Received: from u-143-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.143]:14087 "EHLO u-143-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 11:43:54 -0800 Received: from dea ([193.98.169.28]:17024 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Mon, 12 Mar 2001 20:43:37 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2CJhKY19682; Mon, 12 Mar 2001 20:43:20 +0100 Date: Mon, 12 Mar 2001 20:43:20 +0100 From: Ralf Baechle To: Dan Aizenstros Cc: "linux-mips@oss.sgi.com" Subject: Re: Error in set_cp0_ functions Message-ID: <20010312204320.A19579@bacchus.dhis.org> References: <3AAD0CB9.FAE7C050@vcubed.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AAD0CB9.FAE7C050@vcubed.com>; from dan@vcubed.com on Mon, Mar 12, 2001 at 12:51:53PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 12, 2001 at 12:51:53PM -0500, Dan Aizenstros wrote: > There appears to be an error in the new set_cp0_ functions in > the mipsregs.h file. Thanks for the report, fixed. Ralf From owner-linux-mips@oss.sgi.com Mon Mar 12 13:57:31 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 13:57:21 -0800 Received: from nilpferd.fachschaften.tu-muenchen.de ([129.187.176.79]:43219 "HELO nilpferd.fachschaften.tu-muenchen.de") by oss.sgi.com with SMTP id ; Mon, 12 Mar 2001 13:56:59 -0800 Received: (qmail 11805 invoked from network); 12 Mar 2001 21:56:57 -0000 Received: from mimas.fachschaften.tu-muenchen.de (HELO mimas) (129.187.176.26) by nilpferd.fachschaften.tu-muenchen.de with SMTP; 12 Mar 2001 21:56:57 -0000 Date: Mon, 12 Mar 2001 22:56:40 +0100 (CET) From: Adrian Bunk X-X-Sender: To: Subject: Compile error with current CVS kernel Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I checked out the kernel source from oss.sgi.com at about two hours ago, but the build for my DECstation 5000/240 failed with: mipsel-linux-gcc -I /home/bunk/Ringo/linux/include/asm/gcc -D__KERNEL__ -I/home/bunk/Ringo/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -G 0 -mno-abicalls -fno-pic -mcpu=r3000 -mips1 -pipe -c strnlen_user.S -o strnlen_user.o mipsel-linux-gcc -I /home/bunk/Ringo/linux/include/asm/gcc -D__KERNEL__ -I/home/bunk/Ringo/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -G 0 -mno-abicalls -fno-pic -mcpu=r3000 -mips1 -pipe -c -o r3k_dump_tlb.o r3k_dump_tlb.c rm -f lib.a mipsel-linux-ar rcs lib.a csum_partial.o csum_partial_copy.o rtc-std.o rtc-no.o memcpy.o memset.o watch.o strlen_user.o strncpy_user.o strnlen_user.o r3k_dump_tlb.o make[2]: Leaving directory `/home/bunk/Ringo/linux/arch/mips/lib' make[1]: Leaving directory `/home/bunk/Ringo/linux/arch/mips/lib' sed -e 's/@@OUTPUT_FORMAT@@/elf32-littlemips/' \ -e 's/@@LOADADDR@@/0x80040000/' arch/mips/ld.script mipsel-linux-ld -static -G 0 -T arch/mips/ld.script arch/mips/kernel/head.o arch/mips/kernel/init_task.o init/main.o init/version.o \ --start-group \ arch/mips/kernel/kernel.o arch/mips/mm/mm.o kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o arch/mips/math-emu/fpu_emulator.o arch/mips/dec/dec.o \ drivers/block/block.o drivers/char/char.o drivers/misc/misc.o drivers/net/net.o drivers/media/media.o drivers/scsi/scsidrv.o drivers/video/video.o drivers/tc/tc.a \ net/network.o \ arch/mips/lib/lib.a /home/bunk/Ringo/linux/lib/lib.a arch/mips/dec/prom/rexlib.a \ --end-group \ -o vmlinux mipsel-linux-nm vmlinux | grep -v '\(compiled\)\|\(\.o$\)\|\( [aUw] \)\|\(\.\.ng$\)\|\(LASH[RL]DI\)' | sort > System.map make[1]: Entering directory `/home/bunk/Ringo/linux/arch/mips/boot' gcc -o elf2ecoff elf2ecoff.c ./elf2ecoff /home/bunk/Ringo/linux/vmlinux vmlinux.ecoff -a wrote 20 byte file header. wrote 56 byte a.out header. wrote 240 bytes of section headers. wrote 4 byte pad. writing 1848 bytes... Intersegment gap (-2147239736 bytes) too large. make[1]: *** [vmlinux.ecoff] Error 1 make[1]: Leaving directory `/home/bunk/Ringo/linux/arch/mips/boot' make: *** [boot] Error 2 I'm using for cross-compiling from i386: $ mipsel-linux-ld -v GNU ld version 2.10.91 (with BFD 2.10.91.0.2) $ mipsel-linux-gcc -v Reading specs from /usr/lib/gcc-lib/mipsel-linux/egcs-2.91.66/specs gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release) $ gcc -v Reading specs from /usr/lib/gcc-lib/i386-linux/2.95.3/specs gcc version 2.95.3 20010219 (prerelease) $ cu Adrian -- Nicht weil die Dinge schwierig sind wagen wir sie nicht, sondern weil wir sie nicht wagen sind sie schwierig. From owner-linux-mips@oss.sgi.com Mon Mar 12 15:16:11 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 15:15:51 -0800 Received: from u-143-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.143]:23303 "EHLO u-143-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 15:15:43 -0800 Received: from dea ([193.98.169.28]:54400 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Tue, 13 Mar 2001 00:15:26 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2CNFK422560; Tue, 13 Mar 2001 00:15:20 +0100 Date: Tue, 13 Mar 2001 00:15:20 +0100 From: Ralf Baechle To: Adrian Bunk Cc: Subject: Re: Compile error with current CVS kernel Message-ID: <20010313001520.A20673@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from bunk@fs.tum.de on Mon, Mar 12, 2001 at 10:56:40PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Mar 12, 2001 at 10:56:40PM +0100, Adrian Bunk wrote: Send me the output of ``mipsel-linux-objdump -p -h vmlinux''. Ralf From owner-linux-mips@oss.sgi.com Mon Mar 12 23:47:33 2001 Received: by oss.sgi.com id ; Mon, 12 Mar 2001 23:47:14 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:31251 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Mon, 12 Mar 2001 23:46:47 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K154N1RSB2000JC6@research.kpn.com>; Tue, 13 Mar 2001 08:46:45 +0100 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) with ESMTP id IAA07580; Tue, 13 Mar 2001 08:46:43 +0100 (MET) Date: Tue, 13 Mar 2001 08:46:43 +0100 From: "Houten K.H.C. van (Karel)" X-Face: ";:TzQQC{mTp~$W,'m4@Lu1Lu$rtG_~5kvYO~F:C'KExk9o1X"iRz[0%{bq?6Aj#>VhSD?v 1W9`.Qsf+P&*iQEL8&y,RDj&U.]!(R-?c-h5h%Iw%r$|%6+Jc>GTJe!_1&A0o'lC[`I#={2BzOXT1P q366I$WL=;[+SDo1RoIT+a}_y68Y:jQ^xp4=*4-ryiymi>hy Subject: Re: Compile error with current CVS kernel In-reply-to: "Your message of Tue, 13 Mar 2001 00:15:20 +0100." <20010313001520.A20673@bacchus.dhis.org> To: Ralf Baechle Cc: Adrian Bunk , linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Reply-to: K.H.C.vanHouten@kpn.com Message-id: <200103130746.IAA07580@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: exmh version 1.6.5 12/11/95 Content-type: multipart/mixed ; boundary="===_0_Tue_Mar_13_08:46:33_MET_2001" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multipart MIME message. --===_0_Tue_Mar_13_08:46:33_MET_2001 Content-Type: text/plain; charset=us-ascii Hi Rald, Adrian, Ralf wrote: > On Mon, Mar 12, 2001 at 10:56:40PM +0100, Adrian Bunk wrote: >> [about failing cross-compile ...] > > Send me the output of ``mipsel-linux-objdump -p -h vmlinux''. I get the same error on a native compile: gcc version 2.95.3 19991030 (Maciej's src) binutils version 2.11.90 (from CVS) kernel source 2.4.0-test9 (from oss CVS) I've attached my objdump output. Hope this helps. Regards, Karel. --===_0_Tue_Mar_13_08:46:33_MET_2001 Content-Type: text/plain; charset=us-ascii Content-Description: objdump.txt vmlinux: file format elf32-bigmips Program Header: 0x70000000 off 0x00000000001a11e0 vaddr 0xffffffff881981e0 paddr 0xffffffff881981e0 align 2**2 filesz 0x0000000000000018 memsz 0x0000000000000018 flags r-- LOAD off 0x0000000000000000 vaddr 0x0000000000001000 paddr 0x0000000000001000 align 2**12 filesz 0x000000000000a184 memsz 0x000000000000a184 flags r-- LOAD off 0x000000000000b000 vaddr 0xffffffff88002000 paddr 0xffffffff88002000 align 2**12 filesz 0x00000000001acd10 memsz 0x00000000001d25a4 flags rwx private flags = 101: [no abi set] [mips1] [32bitmode] Sections: Idx Name Size VMA LMA File off Algn 0 .text 00180020 ffffffff88002000 ffffffff88002000 0000b000 2**13 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .fixup 000011e8 ffffffff88182020 ffffffff88182020 0018b020 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 __ex_table 00001fa8 ffffffff88183210 ffffffff88183210 0018c210 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 3 __dbe_table 00000000 ffffffff881851b8 ffffffff881851b8 0018e1b8 2**0 CONTENTS, ALLOC, LOAD, READONLY, DATA 4 .text.init 0000e124 ffffffff88186000 ffffffff88186000 0018f000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 5 .data.init 0000382c ffffffff88194124 ffffffff88194124 0019d124 2**2 CONTENTS, ALLOC, LOAD, DATA 6 .setup.init 000000d8 ffffffff88197950 ffffffff88197950 001a0950 2**2 CONTENTS, ALLOC, LOAD, DATA 7 .initcall.init 00000068 ffffffff88197a28 ffffffff88197a28 001a0a28 2**2 CONTENTS, ALLOC, LOAD, DATA 8 .data.cacheline_aligned 000001e0 ffffffff88198000 ffffffff88198000 001a1000 2**5 CONTENTS, ALLOC, LOAD, DATA 9 .reginfo 00000018 ffffffff881981e0 ffffffff881981e0 001a11e0 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA, LINK_ONCE_SAME_SIZE 10 .data 00016b10 ffffffff88198200 ffffffff88198200 001a1200 2**4 CONTENTS, ALLOC, LOAD, DATA 11 .sbss 000002c4 ffffffff881aed10 ffffffff881aed10 001b7d10 2**3 ALLOC 12 .bss 000255c4 ffffffff881aefe0 ffffffff881aefe0 001b7d1c 2**4 ALLOC 13 .mdebug 000a6b78 0000000000000000 0000000000000000 001b7d1c 2**2 CONTENTS, READONLY, DEBUGGING 14 .note 00001af4 0000000000000000 0000000000000000 0025e894 2**0 CONTENTS, READONLY 15 .kstrtab 00007c24 0000000000001b00 0000000000001b00 00000b00 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 16 __ksymtab 00001a60 0000000000009724 0000000000009724 00008724 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA --===_0_Tue_Mar_13_08:46:33_MET_2001 Content-Type: text/plain; charset=us-ascii Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- --===_0_Tue_Mar_13_08:46:33_MET_2001-- From owner-linux-mips@oss.sgi.com Tue Mar 13 05:56:15 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 05:56:05 -0800 Received: from u-141-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.141]:56583 "EHLO u-141-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 05:55:42 -0800 Received: from dea ([193.98.169.28]:3968 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Tue, 13 Mar 2001 14:55:30 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2DDrUA02107; Tue, 13 Mar 2001 14:53:30 +0100 Date: Tue, 13 Mar 2001 14:53:30 +0100 From: Ralf Baechle To: K.H.C.vanHouten@kpn.com Cc: Adrian Bunk , linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Subject: Re: Compile error with current CVS kernel Message-ID: <20010313145330.A1208@bacchus.dhis.org> References: <20010313001520.A20673@bacchus.dhis.org> <200103130746.IAA07580@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200103130746.IAA07580@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Tue, Mar 13, 2001 at 08:46:43AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Mar 13, 2001 at 08:46:43AM +0100, Houten K.H.C. van (Karel) wrote: > I get the same error on a native compile: > gcc version 2.95.3 19991030 (Maciej's src) > binutils version 2.11.90 (from CVS) > kernel source 2.4.0-test9 (from oss CVS) > > I've attached my objdump output. > Hope this helps. Not necessary, Adrian already sent his output. The fix isn't difficult either, it's just putting .modinfo into the linker script also. The question is still why newer ld is placing sections be default so absurdly which is what I'm currently enquiring. Ralf From owner-linux-mips@oss.sgi.com Tue Mar 13 06:59:55 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 06:59:35 -0800 Received: from mfcf.math.uwaterloo.ca ([129.97.216.156]:60088 "EHLO mfcf.math.uwaterloo.ca") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 06:59:12 -0800 Received: from localhost (wtautz@localhost) by mfcf.math.uwaterloo.ca (8.9.3/8.9.3) with SMTP id JAA20496; Tue, 13 Mar 2001 09:59:10 -0500 (EST) X-Authentication-Warning: mfcf.math: wtautz owned process doing -bs Date: Tue, 13 Mar 2001 09:59:09 -0500 (EST) From: Walter Tautz To: linux-mips@oss.sgi.com cc: Walter Tautz Subject: (new list subscriber: from University of Waterloo): Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I am colleague of Robyn Landers at University of Waterloo and I am a member of the linux taskgroup within the math faculty. Q: How do I go about running Linux on an origin2000? Q: How can I help debug/test the kernel on an origin2000. Walter Tautz [MFCF] From owner-linux-mips@oss.sgi.com Tue Mar 13 08:41:55 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 08:41:45 -0800 Received: from u-226-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.226]:7176 "EHLO u-226-18.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 08:41:25 -0800 Received: from dea ([193.98.169.28]:4992 "EHLO dea.waldorf-gmbh.de") by bacchus.dhis.org with ESMTP id ; Tue, 13 Mar 2001 15:22:54 +0100 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2DEMaG06514; Tue, 13 Mar 2001 15:22:36 +0100 Date: Tue, 13 Mar 2001 15:22:36 +0100 From: Ralf Baechle To: K.H.C.vanHouten@kpn.com Cc: Adrian Bunk , linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Subject: Re: Compile error with current CVS kernel Message-ID: <20010313152236.B1208@bacchus.dhis.org> References: <20010313001520.A20673@bacchus.dhis.org> <200103130746.IAA07580@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200103130746.IAA07580@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Tue, Mar 13, 2001 at 08:46:43AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Mar 13, 2001 at 08:46:43AM +0100, Houten K.H.C. van (Karel) wrote: > Hope this helps. Against my low blood pressure - yes ... > LOAD off 0x0000000000000000 vaddr 0x0000000000001000 paddr > 0x0000000000001000 align 2**12 > filesz 0x000000000000a184 memsz 0x000000000000a184 flags r-- This PT_LOAD entry shouldn't even exist ... > LOAD off 0x000000000000b000 vaddr 0xffffffff88002000 paddr > 0xffffffff88002000 align 2**12 > filesz 0x00000000001acd10 memsz 0x00000000001d25a4 flags rwx > 15 .kstrtab 00007c24 0000000000001b00 0000000000001b00 00000b00 2**2 > CONTENTS, ALLOC, LOAD, READONLY, DATA > 16 __ksymtab 00001a60 0000000000009724 0000000000009724 00008724 2**2 > CONTENTS, ALLOC, LOAD, READONLY, DATA That's scary - these sections are explicitly mentioned in the linker script and yet ld places them near address zero. Oh pleassure, oh garbage. This can probably be fixed by changing the ldscript; can experiment what it takes to get your ld to place all sections with a LOAD attribute placed next to each other? My ld behaves fine. Ralf From owner-linux-mips@oss.sgi.com Tue Mar 13 10:18:30 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 10:18:20 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:11016 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 10:18:08 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K15QOTAXMI000JW2@research.kpn.com>; Tue, 13 Mar 2001 19:18:06 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id TAA14585; Tue, 13 Mar 2001 19:18:05 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Tue, 13 Mar 2001 19:18:05 +0100 (MET) From: Karel van Houten Subject: Re: Compile error with current CVS kernel In-reply-to: <20010313152236.B1208@bacchus.dhis.org> To: ralf@oss.sgi.com (Ralf Baechle) Cc: bunk@fs.tum.de (Adrian Bunk), linux-mips@oss.sgi.com Message-id: <200103131818.TAA14585@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Ralf, Ralf wrote: > > That's scary - these sections are explicitly mentioned in the linker > script and yet ld places them near address zero. Oh pleassure, oh > garbage. > > This can probably be fixed by changing the ldscript; can experiment what > it takes to get your ld to place all sections with a LOAD attribute placed > next to each other? My ld behaves fine. Can you point me to a binutils version and/or patches that should behave OK for native compiles? -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Tue Mar 13 10:39:50 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 10:39:31 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:35592 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 10:39:01 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K15REQGXS8000J7C@research.kpn.com>; Tue, 13 Mar 2001 19:39:00 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id TAA14965; Tue, 13 Mar 2001 19:38:59 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Tue, 13 Mar 2001 19:38:59 +0100 (MET) From: Karel van Houten Subject: Re: Compile error with current CVS kernel In-reply-to: <20010313192711.F1208@bacchus.dhis.org> To: ralf@oss.sgi.com (Ralf Baechle) Cc: bunk@fs.tum.de (Adrian Bunk), linux-mips@oss.sgi.com Message-id: <200103131838.TAA14965@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, Ralf wrote: > Karel wrote: > > Can you point me to a binutils version and/or patches that should > > behave OK for native compiles? > > It's not native vs. crosscompile; this problem with binutils hits in both > cases and only older versions (which aren't suitable for use with > glibc 2.2 ...) are not affected. I've just finished compiling gcc 3.0, from CVS, and am now trying to rebuild the kernel with this compiler (same binutils, from cvs). Keith mentioned he did succeed in building a kernel with these... -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Tue Mar 13 10:41:01 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 10:40:51 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:39176 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 10:40:41 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K15RGRSCMS000JW2@research.kpn.com>; Tue, 13 Mar 2001 19:40:39 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id TAA14996; Tue, 13 Mar 2001 19:40:37 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Tue, 13 Mar 2001 19:40:37 +0100 (MET) From: Karel van Houten Subject: Re: Compile error with current CVS kernel In-reply-to: <20010313192711.F1208@bacchus.dhis.org> To: ralf@oss.sgi.com (Ralf Baechle) Cc: bunk@fs.tum.de (Adrian Bunk), linux-mips@oss.sgi.com Message-id: <200103131840.TAA14996@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing While I wrote my previous mail: {standard input}: Assembler messages: {standard input}:1993: Error: expression too complex {standard input}:1993: Fatal error: internal Error, line 1823, ./config/tc-mips.c make[3]: *** [vgacon.o] Error 1 Again.... :-( -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Tue Mar 13 12:36:42 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 12:36:31 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:39665 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 12:36:14 -0800 Received: from mvista.com (IDENT:ppopov@zeus.mvista.com [10.0.0.112]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2DKVN318608 for ; Tue, 13 Mar 2001 12:31:24 -0800 Message-ID: <3AAE846E.916F16BE@mvista.com> Date: Tue, 13 Mar 2001 12:34:54 -0800 From: Pete Popov Organization: Monta Vista Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17-14 i586) X-Accept-Language: en, bg MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: rdev Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Can you "rdev vmlinux /dev/hda1" a mips kernel and have it work (have the kernel recognize that its root fs is /dev/hda1 without passing any command line arguments)? I tried it and it doesn't seem to work, unless you have to specify offset or other options that I don't know about. Pete From owner-linux-mips@oss.sgi.com Tue Mar 13 13:17:11 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 13:17:01 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:32508 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 13:16:40 -0800 Received: from mvista.com (IDENT:ppopov@zeus.mvista.com [10.0.0.112]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2DLBl321039; Tue, 13 Mar 2001 13:11:47 -0800 Message-ID: <3AAE8DE7.D6F5AB9E@mvista.com> Date: Tue, 13 Mar 2001 13:15:19 -0800 From: Pete Popov Organization: Monta Vista Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17-14 i586) X-Accept-Language: en, bg MIME-Version: 1.0 To: Karel van Houten CC: Ralf Baechle , Adrian Bunk , linux-mips@oss.sgi.com, Daniel Jacobowitz Subject: Re: Compile error with current CVS kernel References: <200103131840.TAA14996@sparta.research.kpn.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Karel van Houten wrote: > > While I wrote my previous mail: > > {standard input}: Assembler messages: > {standard input}:1993: Error: expression too complex > {standard input}:1993: Fatal error: internal Error, line 1823, ./config/tc-mips.c > make[3]: *** [vgacon.o] Error 1 > > Again.... :-( We encountered this exact problem a few days ago. One of our engineers tracked it down to the combination of complex macros and inline functions in arch/mips/io.h. He pinpointed precisely the problem to a rare gcc "bug", which is not likely to get fixed anytime soon. I believe a patch was already submitted to Ralf, but it will have to get tested. Pete From owner-linux-mips@oss.sgi.com Tue Mar 13 13:32:31 2001 Received: by oss.sgi.com id ; Tue, 13 Mar 2001 13:32:21 -0800 Received: from u-89-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.89]:5114 "EHLO dea.waldorf-gmbh.de") by oss.sgi.com with ESMTP id ; Tue, 13 Mar 2001 13:32:07 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2DIRBb19054; Tue, 13 Mar 2001 19:27:11 +0100 Date: Tue, 13 Mar 2001 19:27:11 +0100 From: Ralf Baechle To: Karel van Houten Cc: bunk@fs.tum.de (Adrian Bunk), linux-mips@oss.sgi.com Subject: Re: Compile error with current CVS kernel Message-ID: <20010313192711.F1208@bacchus.dhis.org> References: <20010313152236.B1208@bacchus.dhis.org> <200103131818.TAA14585@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200103131818.TAA14585@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Tue, Mar 13, 2001 at 07:18:05PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Mar 13, 2001 at 07:18:05PM +0100, Karel van Houten wrote: > > That's scary - these sections are explicitly mentioned in the linker > > script and yet ld places them near address zero. Oh pleassure, oh > > garbage. > > > > This can probably be fixed by changing the ldscript; can experiment what > > it takes to get your ld to place all sections with a LOAD attribute placed > > next to each other? My ld behaves fine. > > Can you point me to a binutils version and/or patches that should > behave OK for native compiles? It's not native vs. crosscompile; this problem with binutils hits in both cases and only older versions (which aren't suitable for use with glibc 2.2 ...) are not affected. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 14 01:07:46 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 01:07:36 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:5892 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 14 Mar 2001 01:07:13 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 1000) id 22A067D1D; Wed, 14 Mar 2001 09:07:12 +0000 (GMT) Date: Wed, 14 Mar 2001 09:07:12 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: linuxmips.ichilton.co.uk Downtime Message-ID: <20010314090712.A413@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.13i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 795 Lines: 25 Hello, Sorry to those who noticed the site was down. There was a big power failure (2 hours) and woody didn't come back up after it. It's fixed now, except for my 190 days uptime :-( Bye for Now, Ian \|||/ (o o) /-----------------------------ooO-(_)-Ooo----------------------------\ | Ian Chilton E-Mail: ian@ichilton.co.uk | | IRC Nick: GadgetMan Backup: ichilton@www.linux.org.uk | | ICQ: 16007717 / 104665842 Web : http://www.ichilton.co.uk | |--------------------------------------------------------------------| | For people who like peace and quiet: a phoneless cord | \--------------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Mar 14 04:58:16 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 04:57:57 -0800 Received: from u-21-20.karlsruhe.ipdial.viaginterkom.de ([62.180.20.21]:15612 "EHLO dea.waldorf-gmbh.de") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 04:57:46 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2ECvQR30821; Wed, 14 Mar 2001 13:57:26 +0100 Date: Wed, 14 Mar 2001 13:57:26 +0100 From: Ralf Baechle To: Pete Popov Cc: "linux-mips@oss.sgi.com" Subject: Re: rdev Message-ID: <20010314135726.B30630@bacchus.dhis.org> References: <3AAE846E.916F16BE@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AAE846E.916F16BE@mvista.com>; from ppopov@mvista.com on Tue, Mar 13, 2001 at 12:34:54PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 389 Lines: 10 On Tue, Mar 13, 2001 at 12:34:54PM -0800, Pete Popov wrote: > Can you "rdev vmlinux /dev/hda1" a mips kernel and have it work (have > the kernel recognize that its root fs is /dev/hda1 without passing any > command line arguments)? I tried it and it doesn't seem to work, unless > you have to specify offset or other options that I don't know about. No, rdev works only on x86. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 14 05:47:36 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 05:47:27 -0800 Received: from NEVYN.RES.CMU.EDU ([128.2.145.225]:50852 "EHLO nevyn.them.org") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 05:47:03 -0800 Received: from drow by nevyn.them.org with local (Exim 3.22 #1 (Debian)) id 14dBbl-0006gk-00 for ; Wed, 14 Mar 2001 08:46:33 -0500 Date: Wed, 14 Mar 2001 08:46:33 -0500 From: Daniel Jacobowitz To: linux-mips@oss.sgi.com Subject: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010314084633.A25674@nevyn.them.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 1520 Lines: 45 I've been trying for a couple of days now to build a MIPS kernel with CONFIG_CPU_NEVADA, and I can't get it to work. r4k_switch.S produces a pile of "opcode not supported by processor" errors. First, I figured out where the problem is coming from: r4k_switch.S is included for all processors but the r3000 and r3912. Is that really correct? Then, it references FPU_SAVE_DOUBLE, which includes: cfc1 tmp, fcr31; \ sdc1 $f0, (THREAD_FPU + 0x000)(thread); \ sdc1 $f2, (THREAD_FPU + 0x010)(thread); \ The sdc1 instruction in binutils is flagged like this: if (mips_cpu == CPU_R4650) { as_bad (_("opcode not supported on this processor")); return; } And the IVR sets CONFIG_CPU_NEVADA, which produces ifdef CONFIG_CPU_NEVADA GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap -mmad endif and -mmad becomes -m4650 to the assembler. Something is fishy here. Anyone know what? I have a suspicion that we need to change the way we invoke binutils. Making -mmad imply -m4650 just seems lame, since -m4650 also implies -msingle-float, and I don't think that's right for the r8000. I worked back in time in gcc, binutils, and kernel sources and I couldn't figure out what's changed - I'm sure this worked at some point. Any ideas? -- Daniel Jacobowitz Debian GNU/Linux Developer Monta Vista Software Debian Security Team "I am croutons!" From owner-linux-mips@oss.sgi.com Wed Mar 14 05:58:27 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 05:58:18 -0800 Received: from NEVYN.RES.CMU.EDU ([128.2.145.225]:54692 "EHLO nevyn.them.org") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 05:58:10 -0800 Received: from drow by nevyn.them.org with local (Exim 3.22 #1 (Debian)) id 14dBmT-0006kF-00 for ; Wed, 14 Mar 2001 08:57:37 -0500 Date: Wed, 14 Mar 2001 08:57:37 -0500 From: Daniel Jacobowitz To: linux-mips@oss.sgi.com Subject: [patch] troubles - [dmj+@andrew.cmu.edu: Inlining bug on MIPS - both 2.95.3 and 3.0 branches] Message-ID: <20010314085737.A25751@nevyn.them.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="+HP7ph2BbKc20aGI" Content-Disposition: inline User-Agent: Mutt/1.3.16i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 7817 Lines: 187 --+HP7ph2BbKc20aGI Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I submitted the following GCC bug report a couple of days ago, and had a discussion with Geoff Keating about asm constraints. It looks as if the problem I was seeing is a (very) longstanding bug in GCC's reload pass, and is very unlikely to get fixed. How does this workaround patch look? I changed the constant-using functions from io.h into macros. I'm not thrilled by it, but it does seem to be correct. I have a suspicion we could change the confusing "i#*X" constraints back to simply "i" - they were part of my effort to make the inline functions work, before I was defeated by reload. It should be correct either way, though. ----- Forwarded message from Daniel Jacobowitz ----- Date: Fri, 9 Mar 2001 18:10:02 -0500 From: Daniel Jacobowitz Subject: Inlining bug on MIPS - both 2.95.3 and 3.0 branches To: gcc-bugs@gcc.gnu.org Mail-Followup-To: gcc-bugs@gcc.gnu.org I've put together a testcase for a bug exposed by (accidentally) trying to build a mipsel-linux kernel with VGA console enabled. The problem seems to be that we lift a constant term out of a loop into a spare register. Of course, __builtin_constant_p is still true for it, so in the original case we chose to use an inline function which required that argument to be constant. We inline the function using the scratch register instead of the constant, and we lose. The inline function seems to me to be doing something dodgy - it specifies the operand with the constraint "ir", implying that a register would be acceptable. We're lying to the compiler, so it's not that startling that it bites us. On the other hand, there's no need to waste a register on this, so I'm not sure why the constant gets stored in a temporary. Is the invalid result a compiler bug? I'd say that there is at least a small optimization bug here, but the "ir" constraint might mean that the compiler's doing everything as best it can. There doesn't seem to be a way to use an inline function safely and specify a constant constraint on one argument to the function - does this need to be a macro? Dan ----- End forwarded message ----- -- Daniel Jacobowitz Debian GNU/Linux Developer Monta Vista Software Debian Security Team "I am croutons!" --+HP7ph2BbKc20aGI Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="hhl-kernel-2.4.2-1.64.patch" Version 1.64 (Mon Mar 12 2001 drow ) Use macros instead of inline functions for constant io macros, and change "ir" to "i#*X" on Geoff's advice. # This is a BitKeeper generated patch for the following project: # Project Name: HHL 2.4.2 kernel sources, based on linux-2.4.2 # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # linux/include/asm-mips/io.h 1.2 -> 1.3 diff -Nru a/linux/include/asm-mips/io.h b/linux/include/asm-mips/io.h --- a/linux/include/asm-mips/io.h Mon Mar 12 16:52:50 2001 +++ b/linux/include/asm-mips/io.h Mon Mar 12 16:52:50 2001 @@ -248,12 +248,21 @@ #define __OUT(m,s,w) \ __OUT1(s) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); } \ -__OUT1(s##c) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); } \ __OUT1(s##_p) __OUT2(m) : : "r" (__ioswab##w(value)), "i" (0), "r" (mips_io_port_base+port)); \ - SLOW_DOWN_IO; } \ -__OUT1(s##c_p) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io_port_base)); \ SLOW_DOWN_IO; } +#define __OUTMAC(m,w,value,port) ({ __OUT2(m) : : "r" (__ioswab##w(value)), "i#*X" (port), \ + "r" (mips_io_port_base)); }) +#define __OUTMAC_P(m,w,value,port) ({ __OUT2(m) : : "r" (__ioswab##w(value)), "i#*X" (port), \ + "r" (mips_io_port_base)); SLOW_DOWN_IO; }) + +#define __outbc(value,port) __OUTMAC(b,8,value,port) +#define __outwc(value,port) __OUTMAC(h,16,value,port) +#define __outlc(value,port) __OUTMAC(w,32,value,port) +#define __outbc_p(value,port) __OUTMAC_P(b,8,value,port) +#define __outwc_p(value,port) __OUTMAC_P(h,16,value,port) +#define __outlc_p(value,port) __OUTMAC_P(w,32,value,port) + #define __IN1(t,s) \ extern __inline__ t __in##s(unsigned int port) { t _v; @@ -265,14 +274,24 @@ #define __IN(t,m,s,w) \ __IN1(t,s) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); return __ioswab##w(_v); } \ -__IN1(t,s##c) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); return __ioswab##w(_v); } \ -__IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); SLOW_DOWN_IO; return __ioswab##w(_v); } \ -__IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); } +__IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); SLOW_DOWN_IO; return __ioswab##w(_v); } + +#define __INMAC(t,m,w,port) ({ t _v; __IN2(m) : "=r" (_v) : "i#*X" (port), \ + "r" (mips_io_port_base)); __ioswab##w(_v); }) +#define __INMAC_P(t,m,w,port) ({ t _v; __IN2(m) : "=r" (_v) : "i#*X" (port), \ + "r" (mips_io_port_base)); SLOW_DOWN_IO; __ioswab##w(_v); }) + +#define __inbc(port) __INMAC(unsigned char,b,8,port) +#define __inwc(port) __INMAC(unsigned short,h,16,port) +#define __inlc(port) __INMAC(unsigned int,w,32,port) +#define __inbc_p(port) __INMAC_P(unsigned char,b,8,port) +#define __inwc_p(port) __INMAC_P(unsigned short,h,16,port) +#define __inlc_p(port) __INMAC_P(unsigned int,w,32,port) #define __INS1(s) \ extern inline void __ins##s(unsigned int port, void * addr, unsigned long count) { -#define __INS2(m) \ +#define __INS2(m,count) \ if (count) \ __asm__ __volatile__ ( \ ".set\tnoreorder\n\t" \ @@ -286,21 +305,26 @@ ".set\treorder" #define __INS(m,s,i) \ -__INS1(s) __INS2(m) \ +__INS1(s) __INS2(m,count) \ : "=r" (addr), "=r" (count) \ : "0" (addr), "1" (count), "i" (0), \ "r" (mips_io_port_base+port), "I" (i) \ - : "$1");} \ -__INS1(s##c) __INS2(m) \ - : "=r" (addr), "=r" (count) \ - : "0" (addr), "1" (count), "ir" (port), \ - "r" (mips_io_port_base), "I" (i) \ : "$1");} +#define __INSMAC(m,i,port,addr,count) ({ void *_a = (addr); unsigned long _c = (count); \ + __INS2(m,_c) \ + : "=r" (_a), "=r" (_c) \ + : "0" (_a), "1" (_c), "i#*X" (port), \ + "r" (mips_io_port_base), "I" (i) \ + : "$1"); }) +#define __insbc(port,addr,count) __INSMAC(b,1,port,addr,count) +#define __inswc(port,addr,count) __INSMAC(h,2,port,addr,count) +#define __inslc(port,addr,count) __INSMAC(w,4,port,addr,count) + #define __OUTS1(s) \ extern inline void __outs##s(unsigned int port, const void * addr, unsigned long count) { -#define __OUTS2(m) \ +#define __OUTS2(m,count) \ if (count) \ __asm__ __volatile__ ( \ ".set\tnoreorder\n\t" \ @@ -314,14 +338,19 @@ ".set\treorder" #define __OUTS(m,s,i) \ -__OUTS1(s) __OUTS2(m) \ +__OUTS1(s) __OUTS2(m,count) \ : "=r" (addr), "=r" (count) \ : "0" (addr), "1" (count), "i" (0), "r" (mips_io_port_base+port), "I" (i) \ - : "$1");} \ -__OUTS1(s##c) __OUTS2(m) \ - : "=r" (addr), "=r" (count) \ - : "0" (addr), "1" (count), "ir" (port), "r" (mips_io_port_base), "I" (i) \ : "$1");} + +#define __OUTSMAC(m,i,port,addr,count) ({ void *_a = (addr); unsigned long _c = (count); \ + __OUTS2(m,_c) \ + : "=r" (_a), "=r" (_c) \ + : "0" (_a), "1" (_c), "i#*X" (port), "r" (mips_io_port_base), "I" (i) \ + : "$1"); }) +#define __outsbc(port,addr,count) __OUTSMAC(b,1,port,addr,count) +#define __outswc(port,addr,count) __OUTSMAC(h,2,port,addr,count) +#define __outslc(port,addr,count) __OUTSMAC(w,4,port,addr,count) __IN(unsigned char,b,b,8) __IN(unsigned short,h,w,16) --+HP7ph2BbKc20aGI-- From owner-linux-mips@oss.sgi.com Wed Mar 14 10:59:58 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 10:59:49 -0800 Received: from u-203-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.203]:35580 "EHLO dea.waldorf-gmbh.de") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 10:59:37 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2EIxJM02180; Wed, 14 Mar 2001 19:59:19 +0100 Date: Wed, 14 Mar 2001 19:59:19 +0100 From: Ralf Baechle To: Daniel Jacobowitz Cc: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010314195919.A1911@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010314084633.A25674@nevyn.them.org>; from dan@debian.org on Wed, Mar 14, 2001 at 08:46:33AM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 2537 Lines: 69 On Wed, Mar 14, 2001 at 08:46:33AM -0500, Daniel Jacobowitz wrote: > I've been trying for a couple of days now to build a MIPS kernel with > CONFIG_CPU_NEVADA, and I can't get it to work. r4k_switch.S produces a > pile of "opcode not supported by processor" errors. Known and unsolved problem. > First, I figured out where the problem is coming from: > > r4k_switch.S is included for all processors but the r3000 and r3912. > Is that really correct? Then, it references FPU_SAVE_DOUBLE, which > includes: Yes. Originally written for the R4000 the Dr. Franksteins at MIPS in the meantime also have taken r4k-style fpus and put them into 32-bit processors, > cfc1 tmp, fcr31; \ > sdc1 $f0, (THREAD_FPU + 0x000)(thread); \ > sdc1 $f2, (THREAD_FPU + 0x010)(thread); \ > > > The sdc1 instruction in binutils is flagged like this: > if (mips_cpu == CPU_R4650) > { > as_bad (_("opcode not supported on this processor")); > return; > } > > And the IVR sets CONFIG_CPU_NEVADA, which produces > ifdef CONFIG_CPU_NEVADA > GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap -mmad > endif > > and -mmad becomes -m4650 to the assembler. Which is pretty much bs because mmad may have been introduced with the R4640 / R4650 but isn't only available on this processor. From an ISA view it's a processor specific extension and as such it should be controlled by a separate option. Gcc has -mmad which is fine but passing it on to as as -m4650 is borken. > Something is fishy here. Anyone know what? I have a suspicion that we > need to change the way we invoke binutils. Making -mmad imply -m4650 > just seems lame, since -m4650 also implies -msingle-float, and I don't > think that's right for the r8000. R8000 is serious fp, indeed. > I worked back in time in gcc, binutils, and kernel sources and I > couldn't figure out what's changed - I'm sure this worked at some > point. You'll have to go back far in time. I introduced the use of -mmad for Nevada-class CPUs in late summor '97. As a second bug which makes this one even more annoying something like .set mips3 sdc1 $f2, (a0) .set mips0 also doesn't work - the assembler will still throw an "opcode not supported on this processor" message. After all MIPS III means double precission fp. And passing additional assembler options with -Wa,foo doesn't help either in this case so without the necessary gcc / assembler changes this optimization is lost for now. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 14 11:06:19 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 11:06:10 -0800 Received: from NEVYN.RES.CMU.EDU ([128.2.145.225]:20647 "EHLO nevyn.them.org") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 11:05:58 -0800 Received: from drow by nevyn.them.org with local (Exim 3.22 #1 (Debian)) id 14dGaP-0007gy-00; Wed, 14 Mar 2001 14:05:29 -0500 Date: Wed, 14 Mar 2001 14:05:29 -0500 From: Daniel Jacobowitz To: Ralf Baechle Cc: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010314140529.A29525@nevyn.them.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <20010314195919.A1911@bacchus.dhis.org>; from ralf@oss.sgi.com on Wed, Mar 14, 2001 at 07:59:19PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 2677 Lines: 69 On Wed, Mar 14, 2001 at 07:59:19PM +0100, Ralf Baechle wrote: > On Wed, Mar 14, 2001 at 08:46:33AM -0500, Daniel Jacobowitz wrote: > > > I've been trying for a couple of days now to build a MIPS kernel with > > CONFIG_CPU_NEVADA, and I can't get it to work. r4k_switch.S produces a > > pile of "opcode not supported by processor" errors. > > Known and unsolved problem. > > cfc1 tmp, fcr31; \ > > sdc1 $f0, (THREAD_FPU + 0x000)(thread); \ > > sdc1 $f2, (THREAD_FPU + 0x010)(thread); \ > > > > > > The sdc1 instruction in binutils is flagged like this: > > if (mips_cpu == CPU_R4650) > > { > > as_bad (_("opcode not supported on this processor")); > > return; > > } > > > > And the IVR sets CONFIG_CPU_NEVADA, which produces > > ifdef CONFIG_CPU_NEVADA > > GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap -mmad > > endif > > > > and -mmad becomes -m4650 to the assembler. > > Which is pretty much bs because mmad may have been introduced with the > R4640 / R4650 but isn't only available on this processor. From an ISA > view it's a processor specific extension and as such it should be > controlled by a separate option. Gcc has -mmad which is fine but passing > it on to as as -m4650 is borken. OK, so that needs to change. That's pretty easy to do, at least in our local toolchains. > > I worked back in time in gcc, binutils, and kernel sources and I > > couldn't figure out what's changed - I'm sure this worked at some > > point. > > You'll have to go back far in time. I introduced the use of -mmad for > Nevada-class CPUs in late summor '97. > > As a second bug which makes this one even more annoying something like > > .set mips3 > sdc1 $f2, (a0) > .set mips0 > > also doesn't work - the assembler will still throw an "opcode not supported > on this processor" message. After all MIPS III means double precission fp. > And passing additional assembler options with -Wa,foo doesn't help either > in this case so without the necessary gcc / assembler changes this > optimization is lost for now. Does -mmad make a sufficient difference on these processors to bother fixing it? If it does, I can probably whip up a -mmad patch to binutils to allow those opcodes - or I could introduce -mnevada, or whatever the appropriate term would be, to mean "r8000 with the mad* extensions". In fact, that would probably be easiest, and sounds like the most correct. -- Daniel Jacobowitz Debian GNU/Linux Developer Monta Vista Software Debian Security Team "I am croutons!" From owner-linux-mips@oss.sgi.com Wed Mar 14 11:21:31 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 11:21:22 -0800 Received: from u-203-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.203]:48892 "EHLO dea.waldorf-gmbh.de") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 11:21:07 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2EJKwL02386; Wed, 14 Mar 2001 20:20:58 +0100 Date: Wed, 14 Mar 2001 20:20:58 +0100 From: Ralf Baechle To: Daniel Jacobowitz Cc: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010314202058.B1911@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010314140529.A29525@nevyn.them.org>; from dan@debian.org on Wed, Mar 14, 2001 at 02:05:29PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 1828 Lines: 46 On Wed, Mar 14, 2001 at 02:05:29PM -0500, Daniel Jacobowitz wrote: > OK, so that needs to change. That's pretty easy to do, at least in our > local toolchains. If it's only in your local toolchains, it's lost. Send your changes to the FSF! > > > I worked back in time in gcc, binutils, and kernel sources and I > > > couldn't figure out what's changed - I'm sure this worked at some > > > point. > > > > You'll have to go back far in time. I introduced the use of -mmad for > > Nevada-class CPUs in late summor '97. > > > > As a second bug which makes this one even more annoying something like > > > > .set mips3 > > sdc1 $f2, (a0) > > .set mips0 > > > > also doesn't work - the assembler will still throw an "opcode not supported > > on this processor" message. After all MIPS III means double precission fp. > > And passing additional assembler options with -Wa,foo doesn't help either > > in this case so without the necessary gcc / assembler changes this > > optimization is lost for now. > > Does -mmad make a sufficient difference on these processors to bother > fixing it? Not for the kernel but it's a sufficiently important optimization for some specialised applications (signal processing type etc.) that it should be fixed. > If it does, I can probably whip up a -mmad patch to binutils to allow > those opcodes - or I could introduce -mnevada, or whatever the > appropriate term would be, to mean "r8000 with the mad* extensions". > In fact, that would probably be easiest, and sounds like the most > correct. Don't think of the r8000; the kernel only uses the -mcpu=r8000 option because the Nevada CPUs have _somewhat_ similar scheduling properties to the R8000. This of it as an independant ISA expension which can be used with an arbitrary MIPS processor - even a R3000 processor. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 14 11:52:51 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 11:52:41 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:30192 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 11:52:24 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2EJlV326000; Wed, 14 Mar 2001 11:47:31 -0800 Message-ID: <3AAFCB24.E7910A9B@mvista.com> Date: Wed, 14 Mar 2001 11:48:52 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: Daniel Jacobowitz , linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 828 Lines: 20 Ralf Baechle wrote: > > If it does, I can probably whip up a -mmad patch to binutils to allow > > those opcodes - or I could introduce -mnevada, or whatever the > > appropriate term would be, to mean "r8000 with the mad* extensions". > > In fact, that would probably be easiest, and sounds like the most > > correct. > > Don't think of the r8000; the kernel only uses the -mcpu=r8000 option > because the Nevada CPUs have _somewhat_ similar scheduling properties > to the R8000. This of it as an independant ISA expension which can > be used with an arbitrary MIPS processor - even a R3000 processor. > Although -mmad is generic, why do we need it for kernel compiling? If no good reason, I propose to remove -mmad from the Makefile for Nevada chip. Of course, we still need to fix the -mmad implying -m4650 bug ... Jun From owner-linux-mips@oss.sgi.com Wed Mar 14 12:02:51 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 12:02:42 -0800 Received: from u-203-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.203]:16893 "EHLO dea.waldorf-gmbh.de") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 12:02:23 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2EK27M02757; Wed, 14 Mar 2001 21:02:07 +0100 Date: Wed, 14 Mar 2001 21:02:07 +0100 From: Ralf Baechle To: Jun Sun Cc: Daniel Jacobowitz , linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010314210207.C1911@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <3AAFCB24.E7910A9B@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AAFCB24.E7910A9B@mvista.com>; from jsun@mvista.com on Wed, Mar 14, 2001 at 11:48:52AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 489 Lines: 14 On Wed, Mar 14, 2001 at 11:48:52AM -0800, Jun Sun wrote: > Although -mmad is generic, why do we need it for kernel compiling? If no good > reason, I propose to remove -mmad from the Makefile for Nevada chip. The compiler actually emits a few mmad instructions, so this instruction actually make a small difference. > Of course, we still need to fix the -mmad implying -m4650 bug ... I guess I leave the -mmad flag in the kernel source as reminder for somebody to fix this ... Ralf From owner-linux-mips@oss.sgi.com Wed Mar 14 12:57:11 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 12:57:01 -0800 Received: from NEVYN.RES.CMU.EDU ([128.2.145.225]:29608 "EHLO nevyn.them.org") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 12:56:46 -0800 Received: from drow by nevyn.them.org with local (Exim 3.22 #1 (Debian)) id 14dIJd-0008Cy-00; Wed, 14 Mar 2001 15:56:17 -0500 Date: Wed, 14 Mar 2001 15:56:17 -0500 From: Daniel Jacobowitz To: Ralf Baechle Cc: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010314155617.A31541@nevyn.them.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <20010314202058.B1911@bacchus.dhis.org>; from ralf@oss.sgi.com on Wed, Mar 14, 2001 at 08:20:58PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 1478 Lines: 34 On Wed, Mar 14, 2001 at 08:20:58PM +0100, Ralf Baechle wrote: > On Wed, Mar 14, 2001 at 02:05:29PM -0500, Daniel Jacobowitz wrote: > > > OK, so that needs to change. That's pretty easy to do, at least in our > > local toolchains. > > If it's only in your local toolchains, it's lost. Send your changes to > the FSF! Of course. Let me clarify that statement - it's easy to do in a way that would be acceptable in our local toolchains, and somewhat harder to do in a way acceptable to the FSF. In this case, though, not much harder. I'm going to try to have a -mmad patch later today for binutils, and a trivial patch for GCC to use it instead of -m4650. > > If it does, I can probably whip up a -mmad patch to binutils to allow > > those opcodes - or I could introduce -mnevada, or whatever the > > appropriate term would be, to mean "r8000 with the mad* extensions". > > In fact, that would probably be easiest, and sounds like the most > > correct. > > Don't think of the r8000; the kernel only uses the -mcpu=r8000 option > because the Nevada CPUs have _somewhat_ similar scheduling properties > to the R8000. This of it as an independant ISA expension which can > be used with an arbitrary MIPS processor - even a R3000 processor. Oh, I see. Thanks for the clarification. -- Daniel Jacobowitz Debian GNU/Linux Developer Monta Vista Software Debian Security Team "I am croutons!" From owner-linux-mips@oss.sgi.com Wed Mar 14 14:08:32 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 14:08:13 -0800 Received: from mx2.mips.com ([206.31.31.227]:18845 "EHLO mx2.mips.com") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 14:08:00 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx2.mips.com (8.9.3/8.9.0) with ESMTP id OAA24456; Wed, 14 Mar 2001 14:07:59 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id OAA28323; Wed, 14 Mar 2001 14:07:56 -0800 (PST) Message-ID: <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Ralf Baechle" Cc: References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Date: Wed, 14 Mar 2001 23:11:47 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 1744 Lines: 37 > > If it does, I can probably whip up a -mmad patch to binutils to allow > > those opcodes - or I could introduce -mnevada, or whatever the > > appropriate term would be, to mean "r8000 with the mad* extensions". > > In fact, that would probably be easiest, and sounds like the most > > correct. > > Don't think of the r8000; the kernel only uses the -mcpu=r8000 option > because the Nevada CPUs have _somewhat_ similar scheduling properties > to the R8000. This of it as an independant ISA expension which can > be used with an arbitrary MIPS processor - even a R3000 processor. In the interests of historical accuracy and general pedantry, let me point out that -mcpu=r8000 is in effect a rather klugy way of saying "-mips4" to compilers that predate official MIPS IV ISA support. The R8000 was the first MIPS IV CPU, followed by the R10000 and the R5000. The "Nevada" processors added three implementation specific instructions to the MIPS IV ISA: MAD, MADU, and MUL (targeted multiply). "Correct" usage would be to enable those three instructions with a "-mcpu=nevada", or better still, "-mcpu=r5200" (for consistency), and to enable the rest of the MIPS IV ISA with "-mips4" instead of the archaic r8000 hack. Note, furthermore, that -mmad needs to be handled with care: Prior to MIPS standardizing the instruction as part of MIPS32, there were four or five subtly (or not so subltly) different definitions of integer multiply-accumulate for MIPS. Most use the same opcode, but even those can differ in side effects (is the rd field interpreted, etc.). A R4650 madd operation will probably behave equivalently on a Nevada CPU, but certainly not on a Vr41xx part, for example. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Mar 14 14:44:04 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 14:43:55 -0800 Received: from mx2.mips.com ([206.31.31.227]:33181 "EHLO mx2.mips.com") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 14:43:38 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx2.mips.com (8.9.3/8.9.0) with ESMTP id OAA24642 for ; Wed, 14 Mar 2001 14:43:37 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id OAA29541; Wed, 14 Mar 2001 14:43:34 -0800 (PST) Message-ID: <011001c0acd8$c27a9220$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Kevin D. Kissell" Cc: References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Date: Wed, 14 Mar 2001 23:47:31 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 1016 Lines: 26 > "Correct" usage would be to enable those three instructions > with a "-mcpu=nevada", or better still, "-mcpu=r5200" (for > consistency), and to enable the rest of the MIPS IV ISA > with "-mips4" instead of the archaic r8000 hack. I should add "Correct", but not useful for 32-bit kernels. "-mips32", once that percolates through the gcc food chain, would be *almost* perfect for 32-bit Nevada kernels. I say almost, because while MIPS32 is 32-bit MIPS IV plus MADD, it also has a handfull of instructions that are not supported by the R52xx, of which it is wildly improbable but theoretically possible that the multiply-subtracts might somehow get emitted in compiled application code. It should work just fine for kernel purposes, though. Meanwhile, try piping objdump of a "-mmad" kernel through "grep -i mad". I'd be stunned if a single MADD turned up. If it gains nothing, but breaks builds, then for heaven's sake banish -mmad from the kernel makefiles! Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Mar 14 17:52:14 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 17:51:55 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:21495 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 17:51:34 -0800 Received: from mvista.com (IDENT:ppopov@zeus.mvista.com [10.0.0.112]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2F1kY317250; Wed, 14 Mar 2001 17:46:34 -0800 Message-ID: <3AB01FCE.CDFA99C9@mvista.com> Date: Wed, 14 Mar 2001 17:50:06 -0800 From: Pete Popov Organization: Monta Vista Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17-14 i586) X-Accept-Language: en, bg MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> <011001c0acd8$c27a9220$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 10534 Lines: 196 "Kevin D. Kissell" wrote: > > > "Correct" usage would be to enable those three instructions > > with a "-mcpu=nevada", or better still, "-mcpu=r5200" (for > > consistency), and to enable the rest of the MIPS IV ISA > > with "-mips4" instead of the archaic r8000 hack. > > I should add "Correct", but not useful for 32-bit > kernels. "-mips32", once that percolates through > the gcc food chain, would be *almost* perfect > for 32-bit Nevada kernels. I say almost, because > while MIPS32 is 32-bit MIPS IV plus MADD, it also > has a handfull of instructions that are not supported > by the R52xx, of which it is wildly improbable but > theoretically possible that the multiply-subtracts > might somehow get emitted in compiled application > code. It should work just fine for kernel purposes, though. > > Meanwhile, try piping objdump of a "-mmad" kernel > through "grep -i mad". I'd be stunned if a single MADD > turned up. If it gains nothing, but breaks builds, then > for heaven's sake banish -mmad from the kernel > makefiles! I managed to compile a 2.4.2 kernel with our bleeding edge toolchain. I had to get rid of the -mmad from the Makefile though. The kernel boots and runs and I ran Bonnie over NFS as well as on an IDE hard disk. I tried some other tests as well, and they all passed. Without the -mmad flag, I see the following mad instructions below. No "madd" though, just madd.s, madd16, mad, etc. So, can we get rid of this flag in the Makefile? Pete 0000000080132690 : 801326dc: 1080fffc beqz $a0,801326d0 801326e4: 04810004 bgez $a0,801326f8 801326f8: 5440002e bnezl $v0,801327b4 80132714: 54400027 bnezl $v0,801327b4 8013271c: 12510024 beq $s2,$s1,801327b0 80132734: 1200001e beqz $s0,801327b0 80132744: 10400003 beqz $v0,80132754 80132758: 1440000c bnez $v0,8013278c 80132764: 10400007 beqz $v0,80132784 80132770: 0c04c988 jal 80132620 8013277c: 5660000d bnezl $s3,801327b4 80132784: 0804c9ec j 801327b0 80132790: 0c04c988 jal 80132620 8013279c: 56600005 bnezl $s3,801327b4 801327a8: 0804c9cd j 80132734 801327c8: 1080fffc beqz $a0,801327bc 801327d0: 1c800004 bgtz $a0,801327e4 80250590: 4d4d2030 nmadd.s $f0,$f10,$f4,$f13 80250a84: 4f4e2820 madd.s $f0,$f26,$f5,$f14 802517bc: 00000029 dmadd16 $zero,$zero 80253c94: 00000029 dmadd16 $zero,$zero 802555a4: 00000029 dmadd16 $zero,$zero 80256178: 00000029 dmadd16 $zero,$zero 80259804: 4d445b20 madd.s $f12,$f10,$f11,$f4 80259810: 4d445b20 madd.s $f12,$f10,$f11,$f4 8025981c: 4d445b20 madd.s $f12,$f10,$f11,$f4 8025aa34: 00000029 dmadd16 $zero,$zero 8025bbf0: 4c257830 nmadd.s $f0,$f1,$f15,$f5 802618a8: 4f2f4920 madd.s $f4,$f25,$f9,$f15 80262018: 4e203a70 nmadd.s $f9,$f17,$f7,$f0 802625c4: 4c554e20 madd.s $f24,$f2,$f9,$f21 80262700: 4c554e20 madd.s $f24,$f2,$f9,$f21 80264d5c: 4c545220 madd.s $f8,$f2,$f10,$f20 80264d64: 00000029 dmadd16 $zero,$zero 80265148: 4e203d21 madd.d $f20,$f17,$f7,$f0 80265194: 4e203d21 madd.d $f20,$f17,$f7,$f0 8026534c: 00000029 dmadd16 $zero,$zero 80265b50: 4f495020 madd.s $f0,$f26,$f10,$f9 80265f70: 4c554e20 madd.s $f24,$f2,$f9,$f21 80266294: 4e554c20 madd.s $f16,$f18,$f9,$f21 802670bc: 4c4c4120 madd.s $f4,$f2,$f8,$f12 80267690: 4d207361 madd.d $f13,$f9,$f14,$f0 80267f5c: 00000029 dmadd16 $zero,$zero 80268314: 00000029 dmadd16 $zero,$zero 80268abc: 00000029 dmadd16 $zero,$zero 80269cd4: 4d435020 madd.s $f0,$f10,$f10,$f3 8026a504: 00000029 dmadd16 $zero,$zero 8026df88: 4c4c5020 madd.s $f0,$f2,$f10,$f12 8026e01c: 4c502070 nmadd.s $f1,$f2,$f4,$f16 8026f6bc: 4c622020 madd.s $f0,$f3,$f4,$f2 8026f71c: 4e622020 madd.s $f0,$f19,$f4,$f2 8026f944: 4c622020 madd.s $f0,$f3,$f4,$f2 8026f9f0: 4d772020 madd.s $f0,$f11,$f4,$f23 802702f8: 4d203231 nmadd.d $f8,$f9,$f6,$f0 80273830: 00000029 dmadd16 $zero,$zero 80276a24: 4f6d7361 madd.d $f13,$f27,$f14,$f13 80277498: 4e203d21 madd.d $f20,$f17,$f7,$f0 80279c10: 4d202020 madd.s $f0,$f9,$f4,$f0 80279ea4: 4d434920 madd.s $f4,$f10,$f9,$f3 8027c588: 4f494520 madd.s $f20,$f26,$f8,$f9 80280048: 4d642520 madd.s $f20,$f11,$f4,$f4 802802c8: 4d4f5220 madd.s $f8,$f10,$f10,$f15 802a0e00: 4e414d20 madd.s $f20,$f18,$f9,$f1 802a2988: 4c4f5720 madd.s $f28,$f2,$f10,$f15 802a2a30: 00000029 dmadd16 $zero,$zero 802a2c14: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802a336c: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802a39e4: 00000029 dmadd16 $zero,$zero 802a3a00: 00000029 dmadd16 $zero,$zero 802a3a1c: 00000029 dmadd16 $zero,$zero 802a3a70: 00000029 dmadd16 $zero,$zero 802a3ac8: 00000029 dmadd16 $zero,$zero 802a3ad0: 4d353531 nmadd.d $f20,$f9,$f6,$f21 802a3b3c: 00000029 dmadd16 $zero,$zero 802a427c: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802a50bc: 4d4f4320 madd.s $f12,$f10,$f8,$f15 802a5504: 4e414c20 madd.s $f16,$f18,$f9,$f1 802a57ec: 4c2e6920 madd.s $f4,$f1,$f13,$f14 802a5f18: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802a6378: 4d544120 madd.s $f4,$f10,$f8,$f20 802a63b4: 4d207161 madd.d $f5,$f9,$f14,$f0 802a6d5c: 00000029 dmadd16 $zero,$zero 802a6ea8: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802a6ebc: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802a73c0: 4e414c20 madd.s $f16,$f18,$f9,$f1 802a74cc: 4e414c20 madd.s $f16,$f18,$f9,$f1 802a75a0: 4f505420 madd.s $f16,$f26,$f10,$f16 802a7994: 4d502031 nmadd.d $f0,$f10,$f4,$f16 802a7ac0: 4e414c20 madd.s $f16,$f18,$f9,$f1 802a7b54: 4e206870 nmadd.s $f1,$f17,$f13,$f0 802a7e8c: 4d502820 madd.s $f0,$f10,$f5,$f16 802a7f84: 4e5b2061 madd.d $f1,$f18,$f4,$f27 802a7f90: 4e5b2061 madd.d $f1,$f18,$f4,$f27 802a7f9c: 4e5b2061 madd.d $f1,$f18,$f4,$f27 802a7fa8: 4e5b2061 madd.d $f1,$f18,$f4,$f27 802a8068: 00000029 dmadd16 $zero,$zero 802a8290: 4d5b2030 nmadd.s $f0,$f10,$f4,$f27 802a8c94: 4f525020 madd.s $f0,$f26,$f10,$f18 802a9088: 4e207370 nmadd.s $f13,$f17,$f14,$f0 802a94ec: 4d544120 madd.s $f4,$f10,$f8,$f20 802a962c: 4d544120 madd.s $f4,$f10,$f8,$f20 802a9c10: 00000029 dmadd16 $zero,$zero 802a9d64: 00000029 dmadd16 $zero,$zero 802a9d80: 00000029 dmadd16 $zero,$zero 802a9e2c: 00000029 dmadd16 $zero,$zero 802ab81c: 00000029 dmadd16 $zero,$zero 802ac17c: 00000029 dmadd16 $zero,$zero 802ac65c: 4d207861 madd.d $f1,$f9,$f15,$f0 802ac740: 4d207861 madd.d $f1,$f9,$f15,$f0 802ac79c: 4c525320 madd.s $f12,$f2,$f10,$f18 802ad3e4: 4e206c61 madd.d $f17,$f17,$f13,$f0 802ad954: 4d202d20 madd.s $f20,$f9,$f5,$f0 802ae994: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802af200: 4e415720 madd.s $f28,$f18,$f10,$f1 802b10cc: 4e414320 madd.s $f12,$f18,$f8,$f1 802b167c: 4e454420 madd.s $f16,$f18,$f8,$f5 802b1690: 4c554d20 madd.s $f20,$f2,$f9,$f21 802b1d88: 4d4f4320 madd.s $f12,$f10,$f8,$f15 802b1df0: 00000029 dmadd16 $zero,$zero 802b2428: 00000029 dmadd16 $zero,$zero 802b2458: 4d206e61 madd.d $f25,$f9,$f13,$f0 802b30e0: 00000029 dmadd16 $zero,$zero 802b3140: 00000029 dmadd16 $zero,$zero 802b3c68: 00000029 dmadd16 $zero,$zero 802b3ff8: 4f525020 madd.s $f0,$f26,$f10,$f18 802b4010: 4f525020 madd.s $f0,$f26,$f10,$f18 802b4120: 4d472030 nmadd.s $f0,$f10,$f4,$f7 802b453c: 4f2f4920 madd.s $f4,$f25,$f9,$f15 802b5d80: 00000029 dmadd16 $zero,$zero 802b6e38: 00000028 madd16 $zero,$zero 802b6e40: 00000029 dmadd16 $zero,$zero 802b7350: 00000028 madd16 $zero,$zero 802b80a8: 00000028 madd16 $zero,$zero 802b80b0: 00000029 dmadd16 $zero,$zero 802b81d8: 00000028 madd16 $zero,$zero 802b81e0: 00000029 dmadd16 $zero,$zero 802bdda4: 00000028 madd16 $zero,$zero 802bddd8: 00000028 madd16 $zero,$zero 802bde7c: 00000029 dmadd16 $zero,$zero 802bdeac: 00000028 madd16 $zero,$zero 802bdeb8: 00000028 madd16 $zero,$zero 802bdf14: 00000028 madd16 $zero,$zero 802be6d8: 00000028 madd16 $zero,$zero 802be764: 00000028 madd16 $zero,$zero 802c0578: 70000000 mad $zero,$zero 802c07f4: 72070000 mad $s0,$a3 802c1490: 00000028 madd16 $zero,$zero 802c957c: 00000029 dmadd16 $zero,$zero 802c96b0: 00000028 madd16 $zero,$zero 802ccdcc: 00000028 madd16 $zero,$zero 802cddb0: 00290028 madd16 $at,$t1 802cdfb0: 00290028 madd16 $at,$t1 802ce1b0: 00290028 madd16 $at,$t1 802ce6b8: 00290028 madd16 $at,$t1 802d4150: 4e534331 nmadd.d $f12,$f18,$f8,$f19 802d667c: 00000028 madd16 $zero,$zero 802d7614: 00290028 madd16 $at,$t1 802d9770: 00000028 madd16 $zero,$zero 802d9820: 00000029 dmadd16 $zero,$zero From owner-linux-mips@oss.sgi.com Wed Mar 14 23:58:26 2001 Received: by oss.sgi.com id ; Wed, 14 Mar 2001 23:58:17 -0800 Received: from mx2.mips.com ([206.31.31.227]:16036 "EHLO mx2.mips.com") by oss.sgi.com with ESMTP id ; Wed, 14 Mar 2001 23:57:56 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx2.mips.com (8.9.3/8.9.0) with ESMTP id XAA25932; Wed, 14 Mar 2001 23:57:54 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id XAA14104; Wed, 14 Mar 2001 23:57:49 -0800 (PST) Message-ID: <001701c0ad26$31a91160$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Pete Popov" Cc: References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> <011001c0acd8$c27a9220$0deca8c0@Ulysses> <3AB01FCE.CDFA99C9@mvista.com> Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Date: Thu, 15 Mar 2001 09:01:49 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 11099 Lines: 201 > > Meanwhile, try piping objdump of a "-mmad" kernel > > through "grep -i mad". I'd be stunned if a single MADD > > turned up. If it gains nothing, but breaks builds, then > > for heaven's sake banish -mmad from the kernel > > makefiles! > > I managed to compile a 2.4.2 kernel with our bleeding edge toolchain. I > had to get rid of the -mmad from the Makefile though. The kernel boots > and runs and I ran Bonnie over NFS as well as on an IDE hard disk. I > tried some other tests as well, and they all passed. > > Without the -mmad flag, I see the following mad instructions below. No > "madd" though, just madd.s, madd16, mad, etc. So, can we get rid of this > flag in the Makefile? "MAD" is a synonym for "MADD", but it looks as if this was a grep of the output of "objdump --diassemble-all". There can't possibly be that many usefull floating point MADDs in the kernel, and the actual bytes of the instructions look suspiciously like ASCII strings. Likewise, "MADD16" and "DMADD16" are R4100 instructions with a different opcode and semantics from the Nevada/MIPS32 MADD. And of course instructions like "mad $zero,$zero" aren't likely to be real code. It's pretty obvious from context, but you should really confirm that address 0x802c07f4 is data before we confirm that *no* MAD/MADDS are being generated in the kernel. It is certainly conceivable that MADDs in some form could be used in the kernel. Specifically, it would not surprise me in the least to see them used in a software modem on a VrLinux platform. But those modules can and should be handled seperately (and are probably written in assembler anyway). There's not need for -mmad in the general set of flags. Kevin K. > > 0000000080132690 : > 801326dc: 1080fffc beqz $a0,801326d0 > 801326e4: 04810004 bgez $a0,801326f8 > 801326f8: 5440002e bnezl $v0,801327b4 > 80132714: 54400027 bnezl $v0,801327b4 > 8013271c: 12510024 beq $s2,$s1,801327b0 > > 80132734: 1200001e beqz $s0,801327b0 > 80132744: 10400003 beqz $v0,80132754 > 80132758: 1440000c bnez $v0,8013278c > 80132764: 10400007 beqz $v0,80132784 > 80132770: 0c04c988 jal 80132620 > 8013277c: 5660000d bnezl $s3,801327b4 > 80132784: 0804c9ec j 801327b0 > 80132790: 0c04c988 jal 80132620 > 8013279c: 56600005 bnezl $s3,801327b4 > 801327a8: 0804c9cd j 80132734 > 801327c8: 1080fffc beqz $a0,801327bc > 801327d0: 1c800004 bgtz $a0,801327e4 > 80250590: 4d4d2030 nmadd.s $f0,$f10,$f4,$f13 > 80250a84: 4f4e2820 madd.s $f0,$f26,$f5,$f14 > 802517bc: 00000029 dmadd16 $zero,$zero > 80253c94: 00000029 dmadd16 $zero,$zero > 802555a4: 00000029 dmadd16 $zero,$zero > 80256178: 00000029 dmadd16 $zero,$zero > 80259804: 4d445b20 madd.s $f12,$f10,$f11,$f4 > 80259810: 4d445b20 madd.s $f12,$f10,$f11,$f4 > 8025981c: 4d445b20 madd.s $f12,$f10,$f11,$f4 > 8025aa34: 00000029 dmadd16 $zero,$zero > 8025bbf0: 4c257830 nmadd.s $f0,$f1,$f15,$f5 > 802618a8: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 80262018: 4e203a70 nmadd.s $f9,$f17,$f7,$f0 > 802625c4: 4c554e20 madd.s $f24,$f2,$f9,$f21 > 80262700: 4c554e20 madd.s $f24,$f2,$f9,$f21 > 80264d5c: 4c545220 madd.s $f8,$f2,$f10,$f20 > 80264d64: 00000029 dmadd16 $zero,$zero > 80265148: 4e203d21 madd.d $f20,$f17,$f7,$f0 > 80265194: 4e203d21 madd.d $f20,$f17,$f7,$f0 > 8026534c: 00000029 dmadd16 $zero,$zero > 80265b50: 4f495020 madd.s $f0,$f26,$f10,$f9 > 80265f70: 4c554e20 madd.s $f24,$f2,$f9,$f21 > 80266294: 4e554c20 madd.s $f16,$f18,$f9,$f21 > 802670bc: 4c4c4120 madd.s $f4,$f2,$f8,$f12 > 80267690: 4d207361 madd.d $f13,$f9,$f14,$f0 > 80267f5c: 00000029 dmadd16 $zero,$zero > 80268314: 00000029 dmadd16 $zero,$zero > 80268abc: 00000029 dmadd16 $zero,$zero > 80269cd4: 4d435020 madd.s $f0,$f10,$f10,$f3 > 8026a504: 00000029 dmadd16 $zero,$zero > 8026df88: 4c4c5020 madd.s $f0,$f2,$f10,$f12 > 8026e01c: 4c502070 nmadd.s $f1,$f2,$f4,$f16 > 8026f6bc: 4c622020 madd.s $f0,$f3,$f4,$f2 > 8026f71c: 4e622020 madd.s $f0,$f19,$f4,$f2 > 8026f944: 4c622020 madd.s $f0,$f3,$f4,$f2 > 8026f9f0: 4d772020 madd.s $f0,$f11,$f4,$f23 > 802702f8: 4d203231 nmadd.d $f8,$f9,$f6,$f0 > 80273830: 00000029 dmadd16 $zero,$zero > 80276a24: 4f6d7361 madd.d $f13,$f27,$f14,$f13 > 80277498: 4e203d21 madd.d $f20,$f17,$f7,$f0 > 80279c10: 4d202020 madd.s $f0,$f9,$f4,$f0 > 80279ea4: 4d434920 madd.s $f4,$f10,$f9,$f3 > 8027c588: 4f494520 madd.s $f20,$f26,$f8,$f9 > 80280048: 4d642520 madd.s $f20,$f11,$f4,$f4 > 802802c8: 4d4f5220 madd.s $f8,$f10,$f10,$f15 > 802a0e00: 4e414d20 madd.s $f20,$f18,$f9,$f1 > 802a2988: 4c4f5720 madd.s $f28,$f2,$f10,$f15 > 802a2a30: 00000029 dmadd16 $zero,$zero > 802a2c14: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802a336c: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802a39e4: 00000029 dmadd16 $zero,$zero > 802a3a00: 00000029 dmadd16 $zero,$zero > 802a3a1c: 00000029 dmadd16 $zero,$zero > 802a3a70: 00000029 dmadd16 $zero,$zero > 802a3ac8: 00000029 dmadd16 $zero,$zero > 802a3ad0: 4d353531 nmadd.d $f20,$f9,$f6,$f21 > 802a3b3c: 00000029 dmadd16 $zero,$zero > 802a427c: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802a50bc: 4d4f4320 madd.s $f12,$f10,$f8,$f15 > 802a5504: 4e414c20 madd.s $f16,$f18,$f9,$f1 > 802a57ec: 4c2e6920 madd.s $f4,$f1,$f13,$f14 > 802a5f18: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802a6378: 4d544120 madd.s $f4,$f10,$f8,$f20 > 802a63b4: 4d207161 madd.d $f5,$f9,$f14,$f0 > 802a6d5c: 00000029 dmadd16 $zero,$zero > 802a6ea8: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802a6ebc: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802a73c0: 4e414c20 madd.s $f16,$f18,$f9,$f1 > 802a74cc: 4e414c20 madd.s $f16,$f18,$f9,$f1 > 802a75a0: 4f505420 madd.s $f16,$f26,$f10,$f16 > 802a7994: 4d502031 nmadd.d $f0,$f10,$f4,$f16 > 802a7ac0: 4e414c20 madd.s $f16,$f18,$f9,$f1 > 802a7b54: 4e206870 nmadd.s $f1,$f17,$f13,$f0 > 802a7e8c: 4d502820 madd.s $f0,$f10,$f5,$f16 > 802a7f84: 4e5b2061 madd.d $f1,$f18,$f4,$f27 > 802a7f90: 4e5b2061 madd.d $f1,$f18,$f4,$f27 > 802a7f9c: 4e5b2061 madd.d $f1,$f18,$f4,$f27 > 802a7fa8: 4e5b2061 madd.d $f1,$f18,$f4,$f27 > 802a8068: 00000029 dmadd16 $zero,$zero > 802a8290: 4d5b2030 nmadd.s $f0,$f10,$f4,$f27 > 802a8c94: 4f525020 madd.s $f0,$f26,$f10,$f18 > 802a9088: 4e207370 nmadd.s $f13,$f17,$f14,$f0 > 802a94ec: 4d544120 madd.s $f4,$f10,$f8,$f20 > 802a962c: 4d544120 madd.s $f4,$f10,$f8,$f20 > 802a9c10: 00000029 dmadd16 $zero,$zero > 802a9d64: 00000029 dmadd16 $zero,$zero > 802a9d80: 00000029 dmadd16 $zero,$zero > 802a9e2c: 00000029 dmadd16 $zero,$zero > 802ab81c: 00000029 dmadd16 $zero,$zero > 802ac17c: 00000029 dmadd16 $zero,$zero > 802ac65c: 4d207861 madd.d $f1,$f9,$f15,$f0 > 802ac740: 4d207861 madd.d $f1,$f9,$f15,$f0 > 802ac79c: 4c525320 madd.s $f12,$f2,$f10,$f18 > 802ad3e4: 4e206c61 madd.d $f17,$f17,$f13,$f0 > 802ad954: 4d202d20 madd.s $f20,$f9,$f5,$f0 > 802ae994: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802af200: 4e415720 madd.s $f28,$f18,$f10,$f1 > 802b10cc: 4e414320 madd.s $f12,$f18,$f8,$f1 > 802b167c: 4e454420 madd.s $f16,$f18,$f8,$f5 > 802b1690: 4c554d20 madd.s $f20,$f2,$f9,$f21 > 802b1d88: 4d4f4320 madd.s $f12,$f10,$f8,$f15 > 802b1df0: 00000029 dmadd16 $zero,$zero > 802b2428: 00000029 dmadd16 $zero,$zero > 802b2458: 4d206e61 madd.d $f25,$f9,$f13,$f0 > 802b30e0: 00000029 dmadd16 $zero,$zero > 802b3140: 00000029 dmadd16 $zero,$zero > 802b3c68: 00000029 dmadd16 $zero,$zero > 802b3ff8: 4f525020 madd.s $f0,$f26,$f10,$f18 > 802b4010: 4f525020 madd.s $f0,$f26,$f10,$f18 > 802b4120: 4d472030 nmadd.s $f0,$f10,$f4,$f7 > 802b453c: 4f2f4920 madd.s $f4,$f25,$f9,$f15 > 802b5d80: 00000029 dmadd16 $zero,$zero > 802b6e38: 00000028 madd16 $zero,$zero > 802b6e40: 00000029 dmadd16 $zero,$zero > 802b7350: 00000028 madd16 $zero,$zero > 802b80a8: 00000028 madd16 $zero,$zero > 802b80b0: 00000029 dmadd16 $zero,$zero > 802b81d8: 00000028 madd16 $zero,$zero > 802b81e0: 00000029 dmadd16 $zero,$zero > 802bdda4: 00000028 madd16 $zero,$zero > 802bddd8: 00000028 madd16 $zero,$zero > 802bde7c: 00000029 dmadd16 $zero,$zero > 802bdeac: 00000028 madd16 $zero,$zero > 802bdeb8: 00000028 madd16 $zero,$zero > 802bdf14: 00000028 madd16 $zero,$zero > 802be6d8: 00000028 madd16 $zero,$zero > 802be764: 00000028 madd16 $zero,$zero > 802c0578: 70000000 mad $zero,$zero > 802c07f4: 72070000 mad $s0,$a3 > 802c1490: 00000028 madd16 $zero,$zero > 802c957c: 00000029 dmadd16 $zero,$zero > 802c96b0: 00000028 madd16 $zero,$zero > 802ccdcc: 00000028 madd16 $zero,$zero > 802cddb0: 00290028 madd16 $at,$t1 > 802cdfb0: 00290028 madd16 $at,$t1 > 802ce1b0: 00290028 madd16 $at,$t1 > 802ce6b8: 00290028 madd16 $at,$t1 > 802d4150: 4e534331 nmadd.d $f12,$f18,$f8,$f19 > 802d667c: 00000028 madd16 $zero,$zero > 802d7614: 00290028 madd16 $at,$t1 > 802d9770: 00000028 madd16 $zero,$zero > 802d9820: 00000029 dmadd16 $zero,$zero From owner-linux-mips@oss.sgi.com Thu Mar 15 05:17:44 2001 Received: by oss.sgi.com id ; Thu, 15 Mar 2001 05:17:35 -0800 Received: from mail.sonytel.be ([193.74.243.200]:65521 "EHLO mail.sonytel.be") by oss.sgi.com with ESMTP id ; Thu, 15 Mar 2001 05:17:17 -0800 Received: from ginger.sonytel.be (ginger.sonytel.be [10.34.16.6]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id OAA13731 for ; Thu, 15 Mar 2001 14:16:59 +0100 (MET) Received: (from tea@localhost) by ginger.sonytel.be (8.9.0/8.8.6) id OAA05479 for linux-mips@oss.sgi.com; Thu, 15 Mar 2001 14:16:59 +0100 (MET) Date: Thu, 15 Mar 2001 14:16:58 +0100 From: Tom Appermont To: linux-mips@oss.sgi.com Subject: size of ioctl Message-ID: <20010315141658.A914@ginger.sonytel.be> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 416 Lines: 26 Howdy, Can anybody tell me why the size of ioctl messages is limited to 256 bytes on mips: include/asm-mips/ioctl.h: ... /* * We to additionally limit parameters to a maximum 255 bytes. */ #define _IOC_SLMASK 0xff ... I would like to see this changed because the PCMCIA software (cardmgr <-> driver services) needs to pass ioctl messages around that are a lot bigger than 256 bytes. Greetz, Tom From owner-linux-mips@oss.sgi.com Thu Mar 15 18:35:35 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2G2ZZB24715 for linux-mips-outgoing; Thu, 15 Mar 2001 18:35:35 -0800 Received: from nevyn.them.org (mail@NEVYN.RES.CMU.EDU [128.2.145.225]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2G2ZIM24710 for ; Thu, 15 Mar 2001 18:35:33 -0800 Received: from drow by nevyn.them.org with local (Exim 3.22 #1 (Debian)) id 14dk4u-0001sQ-00 for ; Thu, 15 Mar 2001 21:34:56 -0500 Date: Thu, 15 Mar 2001 21:34:56 -0500 From: Daniel Jacobowitz To: linux-mips@oss.sgi.com Subject: -mmad patches for binutils/gcc Message-ID: <20010315213456.A7042@nevyn.them.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="8t9RHnE3ZwKMSgU+" Content-Disposition: inline User-Agent: Mutt/1.3.16i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 8654 Lines: 221 --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Before I try to submit these to the FSF, I thought I'd post them here for comments. These patches change one small thing in gcc (%{mmad:-m4650} becomes %{mmad} in the invocation of GAS; we no longer lie about what the processor is) and add a -mmad flag to binutils. I was able to build an IVR kernel with these changes; ext2_statfs, get_pci_port, and vc_resize got one piddling mad instruction each, and nfs_xdr_statfsres got half a dozen. Nothing to write home about, but it's the principal of the thing. -- Daniel Jacobowitz Debian GNU/Linux Developer Monta Vista Software Debian Security Team "I am croutons!" --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="binutils-mips-mad.patch" diff -uNr binutils-2.10.91.0.2.orig/gas/ChangeLog binutils-2.10.91.0.2/gas/ChangeLog --- binutils-2.10.91.0.2.orig/gas/ChangeLog Wed Feb 14 02:22:36 2001 +++ binutils-2.10.91.0.2/gas/ChangeLog Thu Mar 15 18:18:32 2001 @@ -1,3 +1,12 @@ +2001-03-15 Daniel Jacobowitz + + * config/tc-mips.c (struct mips_set_options): Add mad4650 member. + (mips_opts): Initialize it. + (macro_build): Add mad4650 argument to OPCODE_IS_MEMBER. + (mips_ip): Likewise. + (md_longopts[]): Add -mmad option. + (md_parse_option): Handle -mmad option. + 2001-02-13 Jim Wilson * config/tc-ia64.c (operand_match, case TAG13): Make a BFD_RELOC_UNUSED diff -uNr binutils-2.10.91.0.2.orig/gas/config/tc-mips.c binutils-2.10.91.0.2/gas/config/tc-mips.c --- binutils-2.10.91.0.2.orig/gas/config/tc-mips.c Sun Feb 11 19:48:25 2001 +++ binutils-2.10.91.0.2/gas/config/tc-mips.c Thu Mar 15 18:31:41 2001 @@ -185,15 +185,17 @@ /* Non-zero if we should not autoextend mips16 instructions. Changed by `.set autoextend' and `.set noautoextend'. */ int noautoextend; + /* Non-zero if we should allow 4650-style mad instructions. */ + int mad4650; }; /* This is the struct we use to hold the current set of options. Note - that we must set the isa field to ISA_UNKNOWN and the mips16 field to - -1 to indicate that they have not been initialized. */ + that we must set the isa field to ISA_UNKNOWN and the mips16 and + mad4650 fields to -1 to indicate that they have not been initialized. */ static struct mips_set_options mips_opts = { - ISA_UNKNOWN, -1, 0, 0, 0, 0, 0, 0 + ISA_UNKNOWN, -1, 0, 0, 0, 0, 0, 0, -1 }; /* These variables are filled in with the masks of registers used. @@ -994,6 +996,14 @@ a = NULL; } + if (mips_opts.mad4650 == -1) + { + if (mips_cpu == CPU_R4650) + mips_opts.mad4650 = 1; + else + mips_opts.mad4650 = 0; + } + if (mips_opts.isa == ISA_MIPS1 && mips_trap) as_bad (_("trap exception not supported at ISA 1")); @@ -2482,7 +2492,7 @@ if (strcmp (fmt, insn.insn_mo->args) == 0 && insn.insn_mo->pinfo != INSN_MACRO && OPCODE_IS_MEMBER (insn.insn_mo, mips_opts.isa, mips_cpu, - mips_gp32) + mips_gp32, mips_opts.mad4650) && (mips_cpu != CPU_R4650 || (insn.insn_mo->pinfo & FP_D) == 0)) break; @@ -7065,7 +7075,8 @@ assert (strcmp (insn->name, str) == 0); - if (OPCODE_IS_MEMBER (insn, mips_opts.isa, mips_cpu, mips_gp32)) + if (OPCODE_IS_MEMBER (insn, mips_opts.isa, mips_cpu, mips_gp32, + mips_opts.mad4650)) ok = true; else ok = false; @@ -8912,6 +8923,10 @@ {"mips5", no_argument, NULL, OPTION_MIPS5}, #define OPTION_MIPS64 (OPTION_MD_BASE + 30) {"mips64", no_argument, NULL, OPTION_MIPS64}, +#define OPTION_MMAD (OPTION_MD_BASE + 31) + {"mmad", no_argument, NULL, OPTION_MMAD}, +#define OPTION_NO_MMAD (OPTION_MD_BASE + 32) + {"no-mmad", no_argument, NULL, OPTION_NO_MMAD}, #ifdef OBJ_ELF #define OPTION_ELF_BASE (OPTION_MD_BASE + 35) #define OPTION_CALL_SHARED (OPTION_ELF_BASE + 0) @@ -9032,6 +9047,14 @@ break; case OPTION_NO_M4650: + break; + + case OPTION_MMAD: + mips_opts.mad4650 = 1; + break; + + case OPTION_NO_MMAD: + mips_opts.mad4650 = 0; break; case OPTION_M4010: diff -uNr binutils-2.10.91.0.2.orig/gas/doc/c-mips.texi binutils-2.10.91.0.2/gas/doc/c-mips.texi --- binutils-2.10.91.0.2.orig/gas/doc/c-mips.texi Thu Dec 21 19:35:13 2000 +++ binutils-2.10.91.0.2/gas/doc/c-mips.texi Thu Mar 15 18:27:27 2001 @@ -108,9 +108,16 @@ @item -m4650 @itemx -no-m4650 Generate code for the MIPS @sc{r4650} chip. This tells the assembler to accept -the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop} -instructions around accesses to the @samp{HI} and @samp{LO} registers. -@samp{-no-m4650} turns off this option. +the @samp{mad} and @samp{madu} instructions, to not allow double-precision +float instructions, and to not schedule @samp{nop} instructions around accesses +to the @samp{HI} and @samp{LO} registers. @samp{-no-m4650} turns off this +option. + +@item -mmad +@itemx -no-mad +Generate code for the MIPS @sc{r4650} @samp{mad} and @samp{madu} +instructions, without the other restrictions of the @sc{r4650}. +@samp{-no-mmad} turns off support for these instructions. @itemx -m3900 @itemx -no-m3900 diff -uNr binutils-2.10.91.0.2.orig/include/opcode/ChangeLog binutils-2.10.91.0.2/include/opcode/ChangeLog --- binutils-2.10.91.0.2.orig/include/opcode/ChangeLog Mon Feb 12 18:47:34 2001 +++ binutils-2.10.91.0.2/include/opcode/ChangeLog Thu Mar 15 18:14:24 2001 @@ -1,3 +1,7 @@ +Thu Mar 15 18:13:01 EST 2001 Daniel Jacobowitz + + * mips.h (OPCODE_IS_MEMBER): Add mad4650 argument. + Mon Feb 12 17:40:54 CET 2001 Jan Hubicka * i386.h (i386_optab): SSE integer converison instructions have diff -uNr binutils-2.10.91.0.2.orig/include/opcode/mips.h binutils-2.10.91.0.2/include/opcode/mips.h --- binutils-2.10.91.0.2.orig/include/opcode/mips.h Sat Feb 10 18:37:00 2001 +++ binutils-2.10.91.0.2/include/opcode/mips.h Thu Mar 15 18:13:06 2001 @@ -369,12 +369,13 @@ to test, or zero if no CPU specific ISA test is desired. The gp32 arg is set when you need to force 32-bit register usage on a machine with 64-bit registers; see the documentation under -mgp32 - in the MIPS gas docs. */ + in the MIPS gas docs. + The mad4650 option is set if the 4650's MAD extensions are available. */ -#define OPCODE_IS_MEMBER(insn, isa, cpu, gp32) \ +#define OPCODE_IS_MEMBER(insn, isa, cpu, gp32, mad4650) \ ((((insn)->membership & isa) != 0 \ && ((insn)->membership & INSN_GP32 ? gp32 : 1) \ ) \ - || (cpu == CPU_R4650 && ((insn)->membership & INSN_4650) != 0) \ + || (mad4650 && ((insn)->membership & INSN_4650) != 0) \ || (cpu == CPU_R4010 && ((insn)->membership & INSN_4010) != 0) \ || ((cpu == CPU_VR4100 || cpu == CPU_R4111) \ diff -uNr binutils-2.10.91.0.2.orig/opcodes/ChangeLog binutils-2.10.91.0.2/opcodes/ChangeLog --- binutils-2.10.91.0.2.orig/opcodes/ChangeLog Thu Feb 15 01:28:01 2001 +++ binutils-2.10.91.0.2/opcodes/ChangeLog Thu Mar 15 18:19:54 2001 @@ -1,3 +1,7 @@ +2001-03-15 Daniel Jacobowitz + + * mips-dis.c: Add mad4650 option to OPCODE_IS_MEMBER call. + 2001-02-14 Jim Wilson * ia64-ic.tbl: Update from Intel. Add setf to fr-writers. diff -uNr binutils-2.10.91.0.2.orig/opcodes/mips-dis.c binutils-2.10.91.0.2/opcodes/mips-dis.c --- binutils-2.10.91.0.2.orig/opcodes/mips-dis.c Sun Feb 11 19:44:12 2001 +++ binutils-2.10.91.0.2/opcodes/mips-dis.c Thu Mar 15 18:19:13 2001 @@ -446,7 +446,7 @@ { register const char *d; - if (! OPCODE_IS_MEMBER (op, mips_isa, target_processor, 0)) + if (! OPCODE_IS_MEMBER (op, mips_isa, target_processor, 0, 1)) continue; (*info->fprintf_func) (info->stream, "%s", op->name); --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="gcc-mips-mad.patch" --- gcc-2.95.3/gcc/config/mips/mips.h.orig Thu Mar 15 19:39:16 2001 +++ gcc-2.95.3/gcc/config/mips/mips.h Thu Mar 15 19:39:53 2001 @@ -821,7 +821,7 @@ /* GAS_ASM_SPEC is passed when using gas, rather than the MIPS assembler. */ -#define GAS_ASM_SPEC "%{mcpu=*} %{m4650} %{mmad:-m4650} %{m3900} %{v}" +#define GAS_ASM_SPEC "%{mcpu=*} %{m4650} %{mmad} %{m3900} %{v}" /* TARGET_ASM_SPEC is used to select either MIPS_AS_ASM_SPEC or GAS_ASM_SPEC as the default, depending upon the value of --8t9RHnE3ZwKMSgU+-- From owner-linux-mips@oss.sgi.com Thu Mar 15 19:25:13 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2G3PDS25435 for linux-mips-outgoing; Thu, 15 Mar 2001 19:25:13 -0800 Received: from spawn.hockeyfiend.com (mail@dsl027-138-146.nyc1.dsl.speakeasy.net [216.27.138.146]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2G3PCM25432 for ; Thu, 15 Mar 2001 19:25:12 -0800 Received: from localhost ([127.0.0.1] ident=chris) by spawn.hockeyfiend.com with esmtp (Exim 3.22 #1 (Debian)) id 14dkrW-0001TJ-00; Thu, 15 Mar 2001 22:25:10 -0500 Date: Thu, 15 Mar 2001 22:25:10 -0500 (EST) From: "Christopher C. Chimelis" X-Sender: chris@spawn.hockeyfiend.com To: Daniel Jacobowitz cc: linux-mips@oss.sgi.com Subject: Re: -mmad patches for binutils/gcc In-Reply-To: <20010315213456.A7042@nevyn.them.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1255 Lines: 32 On Thu, 15 Mar 2001, Daniel Jacobowitz wrote: > Before I try to submit these to the FSF, I thought I'd post them here for > comments. > > These patches change one small thing in gcc (%{mmad:-m4650} becomes %{mmad} > in the invocation of GAS; we no longer lie about what the processor is) and > add a -mmad flag to binutils. > > I was able to build an IVR kernel with these changes; ext2_statfs, > get_pci_port, and vc_resize got one piddling mad instruction each, and > nfs_xdr_statfsres got half a dozen. Nothing to write home about, but it's > the principal of the thing. Do you want me to include the binutils part in the next Debian binutils upload that I'll be doing tomorrow? I've already built the debs, but had a feeling that there might be some mips changes coming, so I don't mind building again. I've got my Indy up and somewhat running (the lack of available packages like netstd is shocking and tough to work around). I wouldn't mind doing at least some binutils testing on it for now...at least until the dedicated mips folks are more comfortable with the toolchain state. FYI, there's a gcc upload planned for this weekend, so you may want to talk to Matthias about getting the gcc patch into that as well... Let me know :-) C From owner-linux-mips@oss.sgi.com Thu Mar 15 19:59:26 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2G3xQY26031 for linux-mips-outgoing; Thu, 15 Mar 2001 19:59:26 -0800 Received: from dea.waldorf-gmbh.de (u-57-19.karlsruhe.ipdial.viaginterkom.de [62.180.19.57]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2G3xNM26028 for ; Thu, 15 Mar 2001 19:59:24 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2G3uqd02303; Fri, 16 Mar 2001 04:56:52 +0100 Date: Fri, 16 Mar 2001 04:56:52 +0100 From: Ralf Baechle To: Tom Appermont Cc: linux-mips@oss.sgi.com Subject: Re: size of ioctl Message-ID: <20010316045652.C1607@bacchus.dhis.org> References: <20010315141658.A914@ginger.sonytel.be> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010315141658.A914@ginger.sonytel.be>; from tea@sonycom.com on Thu, Mar 15, 2001 at 02:16:58PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 318 Lines: 9 On Thu, Mar 15, 2001 at 02:16:58PM +0100, Tom Appermont wrote: > I would like to see this changed because the PCMCIA software > (cardmgr <-> driver services) needs to pass ioctl messages > around that are a lot bigger than 256 bytes. As of today this is only historic garbage, so _IOC_SLMASK can go away. Ralf From owner-linux-mips@oss.sgi.com Fri Mar 16 05:34:35 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GDYZU04700 for linux-mips-outgoing; Fri, 16 Mar 2001 05:34:35 -0800 Received: from u105.medicalmedia.com (IDENT:root@ip106.medicalmedia.COM [207.121.66.106]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GDYYM04697 for ; Fri, 16 Mar 2001 05:34:34 -0800 Received: from medicalmedia.com (IDENT:mcgonigle@localhost [127.0.0.1]) by u105.medicalmedia.com (8.9.3/8.9.3) with ESMTP id IAA21474 for ; Fri, 16 Mar 2001 08:32:57 -0500 Message-ID: <3AB21608.5030007@medicalmedia.com> Date: Fri, 16 Mar 2001 08:32:56 -0500 From: Bill McGonigle Reply-To: mcgonigle@medicalmedia.com User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.16-3smp i686; en-US; 0.8) Gecko/20010215 X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: machines available to porters Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 6911 Lines: 204 Hi, all, If anyone working on the MIPS/SGI linux port could use any of this hardware, let me know and I'll try to get it sent out to you. -Bill ----- u3 - Indigo 2 (green) scsi disk 0,1 1.07 GB scsi disk 0,2 4.31 GB Irix Audio Processor: Version A2 1 200 MHZ IP22 Processor FPU: MIPS R4000 Floating Point Coprocessor 0.0 CPU: MIPS R4400 Processor Chip rev. 6.0 On-board serial ports: 2 On-board bi-directional parallel port Main Memory Size: 224 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0 Integral SCSI Controller 1 Integral SCSI Controller 0 Disk drive: unit 2 on Controller 0 Disk drive: unit 1 on Controller 0 Graphics board: GUI-Extreme u7 - Indigo 2 (green) scsi disk 0,1 911 MB Irix Audio Processor: Version A2 1 150 MHZ IP22 Processor FPU: MIPS R4000 Floating Point Coprocessor 0.0 CPU: MIPS R4400 Processor Chip rev. 5.0 On-board serial ports: 2 On-board bi-directional parallel port Main Memory Size: 96 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0 Integral SCSI Controller 1 Integral SCSI Controller 0 Disk drive: unit 2 on Controller 0: 720/1.44M floppy Disk drive: unit 1 on Controller 0 Graphics board: GUI-Extreme u74 - Indigo Elan (blue) two hd's (don't know what they are) u5 - Indigo 2 "Impact 10000" (purple) scsi disk 0,1 2.27 GB scsi disk 0,2 9.15 GB scsi disk 0,3 cdrom Irix Audio Processor: Version A2 1 195 MHZ IP22 Processor FPU: MIPS R10010 Floating Point Coprocessor 0.0 CPU: MIPS R10000 Processor Chip rev. 2.5 On-board serial ports: 2 On-board bi-directional parallel port Main Memory Size: 128 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0 Integral SCSI Controller 1 Integral SCSI Controller 0 CDROM: unit 3 on Controller 0 Disk drive: unit 2 on Controller 0 Disk drive: unit 1 on Controller 0 Graphics board: Maximum Impact gutz - Indigo (blue) scsi disk 0,1 422 MB mips R4000 128 MB memory Elan 1 100 MHZ IP22 Processor FPU: MIPS R4010 Floating Point Coprocessor 0.0 CPU: MIPS R4400 Processor Chip rev. 2.2 On-board serial ports: 2 On-board bi-directional parallel port Main Memory Size: 128 Mbytes Integral Ethernet: ec0 Tape drive: unit 3 on Controller 0: DAT Disk drive: unit 1 on Controller 0 Integral SCSI Controller 0 Irix Audio Processor: revision 10 Graphics board: GR2-Elan has cc compiler u11 - O2 IRIX 6.5 scsi disk 4.1 GB 128 MB memory CPU: MIPS R10000 Processor Chip rev. 2.7 FPU: MIPS R10010 Floating Point Coprocessor 0.0 1 195 MHZ IP32 Processor Main Memory Size: 128 Mbytes Integral SCSI Controller 0: Adaptec 7880 Disk drive: unit 2 on Controller 0 On-board serial port: tty1 On-board serial port: tty2 On-board bi-directional parallel port Integral Ethernet: ec0 CRM graphics installed u8 - scsi disk 0,1 2065592 kb scsi disk 0,2 7825976 kb MG10 Impact Iris Audio Processor: version A2 revision 1.1.0 1 195 MHZ IP28 Processor CPU: MIPS R10000 Processor Chip Revision: 2.5 FPU: MIPS R10010 Floating Point Chip Revision: 0.0 On-board serial ports: 2 On-board bi-directional parallel port Main memory size: 128 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0, version 1 Integral SCSI controller 1: Version WD33C93B, revision D Integral SCSI controller 0: Version WD33C93B, revision D CDROM: unit 3 on SCSI controller 0 Disk drive: unit 2 on SCSI controller 0 Disk drive: unit 1 on SCSI controller 0 Graphics board: Solid Impact u9 - runs scsi disk 0,1 472393 kb Indigo Elan 4000 1 150 MHZ IP20 Processor FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0 CPU: MIPS R4400 Processor Chip Revision: 5.0 On-board serial ports: 2 On-board bi-directional parallel port Main memory size: 128 Mbytes Integral Ethernet: ec0, version 1 Integral SCSI controller 0: Version WD33C93B, revision C Disk drive: unit 3 on SCSI controller 0 Disk drive: unit 1 on SCSI controller 0 Iris Audio Processor: revision 10 Graphics board: GR2-Elan u6 - Model: Indigo 2 (green) scsi disk 0,1 2069095 kb scsi disk 0,2 8378400 kb scsi disk 0,3 4183056 kb Iris Audio Processor: version A2 revision 0.1.0 1 100 MHZ IP22 Processor FPU: MIPS R4000 Floating Point Coprocessor Revision: 0.0 CPU: MIPS R4000 Processor Chip Revision: 3.0 On-board serial ports: 2 On-board bi-directional parallel port Main memory size: 96 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0, version 1 Integral SCSI controller 1: Version WD33C93B, revision D Disk drive: unit 6 on SCSI controller 1 Integral SCSI controller 0: Version WD33C93B, revision D Disk drive: unit 2 on SCSI controller 0 Disk drive: unit 1 on SCSI controller 0 Graphics board: GR3-XZ u14 - Model: O2 Serial Number: 0800 6905 B0F6 CPU: 1 195MHz MIPS R10000(IP32) Processor with MIPS R10010 FPU Main Memory: 128 MB Operating System: IRIX Release 6.5 Audio: Iris Audio Processor: version A3 revision 0 Video: MVP unit 0 version 1.4 with no AV Card or Camera. Graphics: CRM graphics installed More Graphics Info: Graphics board 0 is "CRM" graphics. Managed (":0.0") 1280x1024 32 bitplanes board revision 2, CRM revision C, GBE revision B Display 1280x1024 @ 60Hz, monitor type: Unknown Integral Ethernet: ec0, version 1 On-board serial ports: tty1 On-board serial ports: tty2 On-board EPP/ECP parallel port SCSI Controller 0: ADAPTEC 7880 SCSI Controller 1: ADAPTEC 7880 dexter - SGI Impact 10000 Indigo2 -cdrom -option XFS Iris Audio Processor: version A2 revision 1.1.0 1 195 MHZ IP28 Processor CPU: MIPS R10000 Processor Chip Revision: 2.5 FPU: MIPS R10010 Floating Point Chip Revision: 0.0 On-board serial ports: 2 On-board bi-directional parallel port Data cache size: 32 Kbytes Instruction cache size: 32 Kbytes Secondary unified instruction/data cache size: 1 Mbyte Main memory size: 128 Mbytes EISA bus: adapter 0 Integral Ethernet: ec0, version 1 Integral SCSI controller 1: Version WD33C93B, revision D Integral SCSI controller 0: Version WD33C93B, revision D CDROM: unit 3 on SCSI controller 0 Disk drive: unit 2 on SCSI controller 0 Disk drive: unit 1 on SCSI controller 0 Graphics board: Solid Impact From owner-linux-mips@oss.sgi.com Fri Mar 16 05:59:01 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GDx1o05311 for linux-mips-outgoing; Fri, 16 Mar 2001 05:59:01 -0800 Received: from air.lug-owl.de (air.lug-owl.de [62.52.24.190]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GDwwM05308 for ; Fri, 16 Mar 2001 05:58:59 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id E8DC57E1B; Fri, 16 Mar 2001 14:58:55 +0100 (CET) Date: Fri, 16 Mar 2001 14:58:55 +0100 From: Jan-Benedict Glaw To: Bill McGonigle Cc: linux-mips@oss.sgi.com Subject: Re: machines available to porters Message-ID: <20010316145854.A12251@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: Bill McGonigle , linux-mips@oss.sgi.com References: <3AB21608.5030007@medicalmedia.com> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="UlVJffcvxoiEqYs2" Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: <3AB21608.5030007@medicalmedia.com>; from mcgonigle@medicalmedia.com on Fri, Mar 16, 2001 at 08:32:56AM -0500 X-Operating-System: Linux air 2.4.2 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1522 Lines: 49 --UlVJffcvxoiEqYs2 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Mar 16, 2001 at 08:32:56AM -0500, Bill McGonigle wrote: > Hi, all, >=20 > If anyone working on the MIPS/SGI linux port could use any of this > hardware, let me know and I'll try to get it sent out to you. Hi! Many thanks for your offer. I think at lease 3 people located nearby G=FCtersloh or Bielefeld in Germany would be highly interested to get access to these machines. One problem from my point of view are shipping costs... I'd love to see one (or some) of them here (maybe we could host them here to give access to other interrested people) here but I don't know if I could spend all the money for shipping. Maybe Michael and/or Flo are willing to also spend some money to get them here over? MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --UlVJffcvxoiEqYs2 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjqyHB4ACgkQHb1edYOZ4bsJ+ACfTqv4/SOlTJ3xsH3kHkhDDKKB QQMAn140KIFDHX5fq7l0VH/nH9Tp2mrM =ki7Y -----END PGP SIGNATURE----- --UlVJffcvxoiEqYs2-- From owner-linux-mips@oss.sgi.com Fri Mar 16 09:53:22 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GHrMY10408 for linux-mips-outgoing; Fri, 16 Mar 2001 09:53:22 -0800 Received: from dea.waldorf-gmbh.de (u-210-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.210]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GHrJM10405 for ; Fri, 16 Mar 2001 09:53:19 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2GFYeK06531; Fri, 16 Mar 2001 16:34:40 +0100 Date: Fri, 16 Mar 2001 16:34:40 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010316163439.A6514@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <00fc01c0acd3$c881ca80$0deca8c0@Ulysses>; from kevink@mips.com on Wed, Mar 14, 2001 at 11:11:47PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 382 Lines: 11 I looked over the MIPS backend and was depressed how little it still knows about various newer MIPS CPUs. So I tought gcc a bit about the R10000 and R12000. Less than perfect but this patch against cvs-gcc should deliver some improvments. GCC still knows shit about the R7000 and that's definately a CPU worth some effort ... If you want the R10k patch, drop me a mail. Ralf From owner-linux-mips@oss.sgi.com Fri Mar 16 09:53:30 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GHrU910424 for linux-mips-outgoing; Fri, 16 Mar 2001 09:53:30 -0800 Received: from dea.waldorf-gmbh.de (u-210-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.210]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GHrRM10417 for ; Fri, 16 Mar 2001 09:53:27 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2GE4NL04861; Fri, 16 Mar 2001 15:04:23 +0100 Date: Fri, 16 Mar 2001 15:04:23 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010316150423.A3529@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <00fc01c0acd3$c881ca80$0deca8c0@Ulysses>; from kevink@mips.com on Wed, Mar 14, 2001 at 11:11:47PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2051 Lines: 39 On Wed, Mar 14, 2001 at 11:11:47PM +0100, Kevin D. Kissell wrote: > > Don't think of the r8000; the kernel only uses the -mcpu=r8000 option > > because the Nevada CPUs have _somewhat_ similar scheduling properties > > to the R8000. This of it as an independant ISA expension which can > > be used with an arbitrary MIPS processor - even a R3000 processor. > > In the interests of historical accuracy and general pedantry, > let me point out that -mcpu=r8000 is in effect a rather klugy > way of saying "-mips4" to compilers that predate official > MIPS IV ISA support. The R8000 was the first MIPS IV > CPU, followed by the R10000 and the R5000. The "Nevada" > processors added three implementation specific instructions > to the MIPS IV ISA: MAD, MADU, and MUL (targeted multiply). > "Correct" usage would be to enable those three instructions > with a "-mcpu=nevada", or better still, "-mcpu=r5200" (for > consistency), and to enable the rest of the MIPS IV ISA > with "-mips4" instead of the archaic r8000 hack. Your historic facts may be right but the GCC fact aren't. -mcpu=xxx tell GCC to schedule instructions for a certain processor xxx. This does not enable the full use of it's instruction set. Back in time when I choose these options I choose because GCC didn't know -mcpu=r5000 but the R8000 was supported and it was the closest fit. Gcc 1.1.2 knows this option so I just changed all instances of -mcpu=r8000 into -mcpu=r5000. > Note, furthermore, that -mmad needs to be handled with care: > Prior to MIPS standardizing the instruction as part of > MIPS32, there were four or five subtly (or not so subltly) > different definitions of integer multiply-accumulate for MIPS. > Most use the same opcode, but even those can differ in side > effects (is the rd field interpreted, etc.). A R4650 madd operation > will probably behave equivalently on a Nevada CPU, > but certainly not on a Vr41xx part, for example. Unfortunately true but there is a reason that QED's manual marks it as an proprietary extension ... Ralf From owner-linux-mips@oss.sgi.com Fri Mar 16 10:02:34 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GI2YD11051 for linux-mips-outgoing; Fri, 16 Mar 2001 10:02:34 -0800 Received: from nevyn.them.org (mail@NEVYN.RES.CMU.EDU [128.2.145.225]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GI2PM11043; Fri, 16 Mar 2001 10:02:26 -0800 Received: from drow by nevyn.them.org with local (Exim 3.22 #1 (Debian)) id 14dyYC-0001rC-00; Fri, 16 Mar 2001 13:02:08 -0500 Date: Fri, 16 Mar 2001 13:02:08 -0500 From: Daniel Jacobowitz To: Ralf Baechle Cc: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010316130208.A6803@nevyn.them.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> <20010316150423.A3529@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.16i In-Reply-To: <20010316150423.A3529@bacchus.dhis.org>; from ralf@oss.sgi.com on Fri, Mar 16, 2001 at 03:04:23PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1872 Lines: 34 On Fri, Mar 16, 2001 at 03:04:23PM +0100, Ralf Baechle wrote: > On Wed, Mar 14, 2001 at 11:11:47PM +0100, Kevin D. Kissell wrote: > > > > Don't think of the r8000; the kernel only uses the -mcpu=r8000 option > > > because the Nevada CPUs have _somewhat_ similar scheduling properties > > > to the R8000. This of it as an independant ISA expension which can > > > be used with an arbitrary MIPS processor - even a R3000 processor. > > > > In the interests of historical accuracy and general pedantry, > > let me point out that -mcpu=r8000 is in effect a rather klugy > > way of saying "-mips4" to compilers that predate official > > MIPS IV ISA support. The R8000 was the first MIPS IV > > CPU, followed by the R10000 and the R5000. The "Nevada" > > processors added three implementation specific instructions > > to the MIPS IV ISA: MAD, MADU, and MUL (targeted multiply). > > "Correct" usage would be to enable those three instructions > > with a "-mcpu=nevada", or better still, "-mcpu=r5200" (for > > consistency), and to enable the rest of the MIPS IV ISA > > with "-mips4" instead of the archaic r8000 hack. > > Your historic facts may be right but the GCC fact aren't. -mcpu=xxx tell > GCC to schedule instructions for a certain processor xxx. This does not > enable the full use of it's instruction set. Back in time when I choose > these options I choose because GCC didn't know -mcpu=r5000 but the R8000 > was supported and it was the closest fit. Gcc 1.1.2 knows this option > so I just changed all instances of -mcpu=r8000 into -mcpu=r5000. Are you saying that the -mcpu=r8000 options in linux/arch/mips/Makefile for the nevada should be -mcpu=r5000 instead? -- Daniel Jacobowitz Debian GNU/Linux Developer Monta Vista Software Debian Security Team "I am croutons!" From owner-linux-mips@oss.sgi.com Fri Mar 16 10:16:50 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GIGoA11605 for linux-mips-outgoing; Fri, 16 Mar 2001 10:16:50 -0800 Received: from dea.waldorf-gmbh.de (u-210-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.210]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GIGlM11602 for ; Fri, 16 Mar 2001 10:16:47 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2GIGXF14155; Fri, 16 Mar 2001 19:16:33 +0100 Date: Fri, 16 Mar 2001 19:16:33 +0100 From: Ralf Baechle To: Daniel Jacobowitz Cc: linux-mips@oss.sgi.com Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010316191633.C2857@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> <20010316150423.A3529@bacchus.dhis.org> <20010316130208.A6803@nevyn.them.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010316130208.A6803@nevyn.them.org>; from dan@debian.org on Fri, Mar 16, 2001 at 01:02:08PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 226 Lines: 8 On Fri, Mar 16, 2001 at 01:02:08PM -0500, Daniel Jacobowitz wrote: > Are you saying that the -mcpu=r8000 options in linux/arch/mips/Makefile > for the nevada should be -mcpu=r5000 instead? Correct for egcs >= 1.1.2. Ralf From owner-linux-mips@oss.sgi.com Fri Mar 16 10:42:42 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GIggm12215 for linux-mips-outgoing; Fri, 16 Mar 2001 10:42:42 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GIgdM12211; Fri, 16 Mar 2001 10:42:39 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id KAA19687; Fri, 16 Mar 2001 10:42:38 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id KAA12884; Fri, 16 Mar 2001 10:42:35 -0800 (PST) Message-ID: <010201c0ae49$6df089e0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Ralf Baechle" Cc: References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> <20010316150423.A3529@bacchus.dhis.org> Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Date: Fri, 16 Mar 2001 19:46:23 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2812 Lines: 55 > > > Don't think of the r8000; the kernel only uses the -mcpu=r8000 option > > > because the Nevada CPUs have _somewhat_ similar scheduling properties > > > to the R8000. This of it as an independant ISA expension which can > > > be used with an arbitrary MIPS processor - even a R3000 processor. > > > > In the interests of historical accuracy and general pedantry, > > let me point out that -mcpu=r8000 is in effect a rather klugy > > way of saying "-mips4" to compilers that predate official > > MIPS IV ISA support. The R8000 was the first MIPS IV > > CPU, followed by the R10000 and the R5000. The "Nevada" > > processors added three implementation specific instructions > > to the MIPS IV ISA: MAD, MADU, and MUL (targeted multiply). > > "Correct" usage would be to enable those three instructions > > with a "-mcpu=nevada", or better still, "-mcpu=r5200" (for > > consistency), and to enable the rest of the MIPS IV ISA > > with "-mips4" instead of the archaic r8000 hack. > > Your historic facts may be right but the GCC fact aren't. -mcpu=xxx tell > GCC to schedule instructions for a certain processor xxx. This does not > enable the full use of it's instruction set. Back in time when I choose > these options I choose because GCC didn't know -mcpu=r5000 but the R8000 > was supported and it was the closest fit. Gcc 1.1.2 knows this option > so I just changed all instances of -mcpu=r8000 into -mcpu=r5000. As I understand it, the original intention behind -mcpu was to optimise instruction scheduling, but it got perverted over time to enable instructions as well. In any case, the R5000 and R8000 have the same ISA, but the pipelines are radically different. The R8K is 4-way superscalar, with a 2-cycle branch penalty and branch prediction. The R5K is two way supercalar (Int/FP pairs only) with classic MIPS branch behavior, etc. > > Note, furthermore, that -mmad needs to be handled with care: > > Prior to MIPS standardizing the instruction as part of > > MIPS32, there were four or five subtly (or not so subltly) > > different definitions of integer multiply-accumulate for MIPS. > > Most use the same opcode, but even those can differ in side > > effects (is the rd field interpreted, etc.). A R4650 madd operation > > will probably behave equivalently on a Nevada CPU, > > but certainly not on a Vr41xx part, for example. > > Unfortunately true but there is a reason that QED's manual marks it as an > proprietary extension ... Yup. The quesiton is, does gcc's -mmad option actually select based on -mcpu or some other variable which semantics to use, or does it assume R4650 semantics (I had the impression that it was the R4650 that drove the implementation of MIPS madd's into gcc - correct me if I'm wrong). Regards, Kevin K. From owner-linux-mips@oss.sgi.com Fri Mar 16 11:35:52 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GJZq313409 for linux-mips-outgoing; Fri, 16 Mar 2001 11:35:52 -0800 Received: from dea.waldorf-gmbh.de (u-210-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.210]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GJZlM13406 for ; Fri, 16 Mar 2001 11:35:48 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2GJZe214975; Fri, 16 Mar 2001 20:35:40 +0100 Date: Fri, 16 Mar 2001 20:35:40 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Subject: Re: Can't build a CONFIG_CPU_NEVADA kernel Message-ID: <20010316203540.D2857@bacchus.dhis.org> References: <20010314084633.A25674@nevyn.them.org> <20010314195919.A1911@bacchus.dhis.org> <20010314140529.A29525@nevyn.them.org> <20010314202058.B1911@bacchus.dhis.org> <00fc01c0acd3$c881ca80$0deca8c0@Ulysses> <20010316150423.A3529@bacchus.dhis.org> <010201c0ae49$6df089e0$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <010201c0ae49$6df089e0$0deca8c0@Ulysses>; from kevink@mips.com on Fri, Mar 16, 2001 at 07:46:23PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1566 Lines: 36 On Fri, Mar 16, 2001 at 07:46:23PM +0100, Kevin D. Kissell wrote: > > GCC to schedule instructions for a certain processor xxx. This does not > > enable the full use of it's instruction set. Back in time when I choose > > these options I choose because GCC didn't know -mcpu=r5000 but the R8000 > > was supported and it was the closest fit. Gcc 1.1.2 knows this option > > so I just changed all instances of -mcpu=r8000 into -mcpu=r5000. > > As I understand it, the original intention behind -mcpu was to optimise > instruction scheduling, but it got perverted over time to enable > instructions as well. In any case, the R5000 and R8000 have the > same ISA, but the pipelines are radically different. The R8K is > 4-way superscalar, with a 2-cycle branch penalty and branch > prediction. The R5K is two way supercalar (Int/FP pairs only) > with classic MIPS branch behavior, etc. Gcc's knowledge about MIPS architecture is so limited that an R5000 isn't very much different from an R8000 ... > > Unfortunately true but there is a reason that QED's manual marks it as an > > proprietary extension ... > > Yup. The quesiton is, does gcc's -mmad option actually > select based on -mcpu or some other variable which > semantics to use, or does it assume R4650 semantics If you have a collection which of the CPUs have implemented mmad in what way I'd like to use that to put it into gcc. > (I had the impression that it was the R4650 that drove > the implementation of MIPS madd's into gcc - correct > me if I'm wrong). Guess that's right. Ralf From owner-linux-mips@oss.sgi.com Fri Mar 16 12:58:24 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GKwOe14826 for linux-mips-outgoing; Fri, 16 Mar 2001 12:58:24 -0800 Received: from pobox.sibyte.com (pobox.sibyte.com [208.12.96.20]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GKwOM14823 for ; Fri, 16 Mar 2001 12:58:24 -0800 Received: from postal.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id 0B5B7205FD for ; Fri, 16 Mar 2001 12:58:18 -0800 (PST) Received: from SMTP agent by mail gateway Fri, 16 Mar 2001 12:51:24 -0800 Received: from plugh.sibyte.com (plugh.sibyte.com [10.21.64.158]) by postal.sibyte.com (Postfix) with ESMTP id 597831595F for ; Fri, 16 Mar 2001 12:58:18 -0800 (PST) Received: by plugh.sibyte.com (Postfix, from userid 61017) id 14731686D; Fri, 16 Mar 2001 13:00:51 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: linux-mips@oss.sgi.com Subject: mips64 pgd_current Date: Fri, 16 Mar 2001 12:55:18 -0800 X-Mailer: KMail [version 1.0.29] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <01031613005000.00780@plugh.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1007 Lines: 29 Doing some more code trolling here; am looking at the MP parts of the TLB refill code in the mips64 tree, and I'm a bit confused. It looks to me like pgd_current[] is indexed by CP0_CONTEXT and the resulting pointer is supposed to be the base of the page tables for that particular process. This makes sense. However, I see this in mmu_context.h: #define TLBMISS_HANDLER_SETUP_PGD(pgd) \ pgd_current[smp_processor_id()] = (unsigned long)(pgd) #define TLBMISS_HANDLER_SETUP() \ set_context((unsigned long) smp_processor_id() << (23 + 3)); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) extern unsigned long pgd_current[]; so pgd_current[smp_processor_id()] is hard coded to be set to swapper_pg_dir, which, insofar as I can tell, is not a per-cpu structure. It looks to me like this will end up with pgd_current[] being an array of NR_CPUS pointers all of which point to the same pgd table. I know I must be misunderstanding this code. Any suggestions as to what I'm missing? Thanks, Justin From owner-linux-mips@oss.sgi.com Fri Mar 16 14:08:36 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GM8aG16145 for linux-mips-outgoing; Fri, 16 Mar 2001 14:08:36 -0800 Received: from pobox.sibyte.com (pobox.sibyte.com [208.12.96.20]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GM8aM16142 for ; Fri, 16 Mar 2001 14:08:36 -0800 Received: from postal.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id DE571205FC for ; Fri, 16 Mar 2001 14:08:30 -0800 (PST) Received: from SMTP agent by mail gateway Fri, 16 Mar 2001 14:01:36 -0800 Received: from plugh.sibyte.com (plugh.sibyte.com [10.21.64.158]) by postal.sibyte.com (Postfix) with ESMTP id 9E69C1595F for ; Fri, 16 Mar 2001 14:08:30 -0800 (PST) Received: by plugh.sibyte.com (Postfix, from userid 61017) id 34823686D; Fri, 16 Mar 2001 14:11:03 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: linux-mips@oss.sgi.com Subject: Re: mips64 pgd_current Date: Fri, 16 Mar 2001 14:09:42 -0800 X-Mailer: KMail [version 1.0.29] Content-Type: text/plain References: <01031613005000.00780@plugh.sibyte.com> In-Reply-To: <01031613005000.00780@plugh.sibyte.com> MIME-Version: 1.0 Message-Id: <01031614110304.00780@plugh.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 224 Lines: 8 As is often the case, I answered my own question my being figuring out how to state it; everything happens as I described, but on context switch, the pgd_current stuff is reset appropriately. Sorry for the noise. -Justin From owner-linux-mips@oss.sgi.com Fri Mar 16 15:06:32 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2GN6W917397 for linux-mips-outgoing; Fri, 16 Mar 2001 15:06:32 -0800 Received: from smtp4.xs4all.nl (smtp4.xs4all.nl [194.109.6.50]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2GN6VM17393 for ; Fri, 16 Mar 2001 15:06:31 -0800 Received: from xs3.xs4all.nl (wdmgds@xs3.xs4all.nl [194.109.6.44]) by smtp4.xs4all.nl (8.9.3/8.9.3) with ESMTP id AAA06552 for ; Sat, 17 Mar 2001 00:06:29 +0100 (CET) From: wdmgds@xs4all.nl Received: from localhost (wdmgds@localhost) by xs3.xs4all.nl (8.9.0/8.9.0) with ESMTP id AAA08276 for ; Sat, 17 Mar 2001 00:04:23 +0100 (CET) Date: Sat, 17 Mar 2001 00:04:23 +0100 (CET) To: linux-mips@oss.sgi.com Subject: Re: machines available to porters In-Reply-To: <20010316145854.A12251@lug-owl.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=X-UNKNOWN Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from QUOTED-PRINTABLE to 8bit by oss.sgi.com id f2GN6WM17395 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 593 Lines: 24 On Fri, 16 Mar 2001, Jan-Benedict Glaw wrote: > On Fri, Mar 16, 2001 at 08:32:56AM -0500, Bill McGonigle wrote: > > Hi, all, > > > > If anyone working on the MIPS/SGI linux port could use any of this > > hardware, let me know and I'll try to get it sent out to you. > > Hi! > > Many thanks for your offer. I think at lease 3 people located nearby > Gütersloh or Bielefeld in Germany would be highly interested to Who are those well known committers if I might ask? > get access to these machines. One problem from my point of view > are shipping costs... Sincerely, Wednesday From owner-linux-mips@oss.sgi.com Sat Mar 17 02:51:22 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2HApMA24769 for linux-mips-outgoing; Sat, 17 Mar 2001 02:51:22 -0800 Received: from pandora.research.kpn.com (pandora.research.kpn.com [139.63.192.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2HApLM24766 for ; Sat, 17 Mar 2001 02:51:21 -0800 Received: (from karel@localhost) by pandora.research.kpn.com (8.9.3/8.9.3) id LAA04852 for linux-mips@oss.sgi.com; Sat, 17 Mar 2001 11:51:19 +0100 From: Karel van Houten Message-Id: <200103171051.LAA04852@pandora.research.kpn.com> Subject: rpm crashing on RH 7.0 indy To: linux-mips@oss.sgi.com Date: Sat, 17 Mar 2001 11:51:19 +0100 (MET) X-Url: http://www-lsdm.research.kpn.com/~karel X-Mailer: ELM [version 2.5 PL3] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3245 Lines: 64 Hi all, I hope someone can help me with this problem... I've installed an Indy with Ralfs Redhat/test-7.0 packages. Most things work OK, but rpm itself crashes when installing a package. Here is a trace of what happens: (gdb) run Starting program: /usr/src/redhat/BUILD/rpm-4.0/rpm -ihv /cdrom/mips/XFree86-dev el-4.0.1-1lm.mips.rpm Program received signal SIGSEGV, Segmentation fault. _dl_lookup_versioned_symbol (undef_name=0x2affa6af "strcpy", undef_map=0x10075330, ref=0x7fff9818, symbol_scope=0x1007554c, version=0x100756b0, reloc_type=3, explicit=0) at do-lookup.h:52 52 do-lookup.h: No such file or directory. (gdb) bt #0 _dl_lookup_versioned_symbol (undef_name=0x2affa6af "strcpy", undef_map=0x10075330, ref=0x7fff9818, symbol_scope=0x1007554c, version=0x100756b0, reloc_type=3, explicit=0) at do-lookup.h:52 #1 0x5c30e4 in _dl_relocate_object () at ../sysdeps/mips/dl-machine.h:684 #2 0x5b6a40 in dl_open_worker (a=0x1007554c) at dl-open.c:316 #3 0x5b4a18 in _dl_catch_error (objname=0x7fff9a38, errstring=0x7fff9a3c, operate=0x5b6470 , args=0x7fff9a28) at dl-error.c:149 #4 0x5b6ca0 in _dl_open (file=0x7fff9c10 "libnss_nisplus.so.2", mode=1, caller=0x0) at dl-open.c:380 #5 0x58882c in do_dlopen (ptr=0x7fff9bf0) at dl-libc.c:78 #6 0x5b4a18 in _dl_catch_error (objname=0x7fff9bc0, errstring=0x7fff9bc4, operate=0x5887ec , args=0x7fff9bf0) at dl-error.c:149 #7 0x5887a4 in dlerror_run (operate=0x1007554c, args=0x0) at dl-libc.c:42 #8 0x58893c in __libc_dlopen (__name=0x1007554c "\020\b\023\230\020\b\031 ") at dl-libc.c:104 #9 0x57d1d0 in __nss_lookup_function (ni=0x10080b80, fct_name=0x5e3be0 "getpwnam_r") at nsswitch.c:333 #10 0x57c560 in __nss_lookup (ni=0x7ffff2b0, fct_name=0x5e3be0 "getpwnam_r", fctp=0x7ffff2b4) at nsswitch.c:148 #11 0x57e544 in __nss_passwd_lookup (ni=0x7ffff2b0, fct_name=0x5e3be0 "getpwnam_r", fctp=0x7ffff2b4) at XXX-lookup.c:68 #12 0x56d7d0 in __getpwnam_r (name=0x5cc34c "root", resbuf=0x10018c08, buffer=0x10080520 "\020", buflen=1024, result=0x7ffff308) at ../nss/getXXbyYY_r.c:159 #13 0x56c9bc in getpwnam (name=0x5cc34c "root") at ../nss/getXXbyYY.c:127 #14 0x42753c in installBinaryPackage (rootdir=0x1004de50 "/", db=0x1004a688, fd=0x100a2bb8, h=0x10088890, flags=0, notify=0x438fa0 , notifyData=0x12, pkgKey=0x7ffff9f6, actions=0x1006edb8, sharedList=0x0, scriptFd=0x0) at install.c:941 #15 0x449c20 in rpmRunTransactions (ts=0x1004dde8, notify=0x438fa0 , notifyData=0x12, okProbs=0x0, newProbs=0x7ffff6c4, transFlags=0, ignoreSet=0) at transaction.c:1701 #16 0x439c4c in rpmInstall (rootdir=0x5c917c "/", fileArgv=0x1001faf8, transFlags=0, interfaceFlags=2, probFilter=0, relocations=0x0) at rpminstall.c:370 #17 0x406a2c in main (argc=3, argv=0xffffffff) at rpm.c:1133 #18 0x53599c in __libc_start_main (main=0x404090
, argc=3, ubp_av=0x7ffff8d4, init=0x4000f8 <_init>, fini=0x5c6880 <_fini>, rtld_fini=0, stack_end=0x7ffff8b0) at ../sysdeps/generic/libc-start.c:111 This is a static rpm binary, so I don't understand why it tries do dynaload anything at all... Thanks in advance, -- Karel van Houten From owner-linux-mips@oss.sgi.com Sat Mar 17 07:01:07 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2HF17d27366 for linux-mips-outgoing; Sat, 17 Mar 2001 07:01:07 -0800 Received: from mailout02.sul.t-online.com (mailout02.sul.t-online.com [194.25.134.17]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2HF14M27362 for ; Sat, 17 Mar 2001 07:01:04 -0800 Received: from fwd03.sul.t-online.com by mailout02.sul.t-online.com with smtp id 14eICT-0002it-01; Sat, 17 Mar 2001 16:01:01 +0100 Received: from void.s.bawue.de (520095841842-0001@[62.158.213.107]) by fmrl03.sul.t-online.com with esmtp id 14eICC-1IlheSC; Sat, 17 Mar 2001 16:00:44 +0100 Received: from florian by void.s.bawue.de with local (Exim 3.16 #1 (Debian)) id 14eELB-0000RL-00; Sat, 17 Mar 2001 11:53:45 +0100 Date: Sat, 17 Mar 2001 11:53:45 +0100 To: linux-mips@oss.sgi.com Subject: Re: machines available to porters Message-ID: <20010317115345.B623@void.s.bawue.de> Mail-Followup-To: Florian Laws , linux-mips@oss.sgi.com References: <3AB21608.5030007@medicalmedia.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AB21608.5030007@medicalmedia.com>; from mcgonigle@medicalmedia.com on Fri, Mar 16, 2001 at 08:32:56AM -0500 From: Florian Laws X-Sender: 520095841842-0001@t-dialin.net Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 451 Lines: 16 On Fri, Mar 16, 2001 at 08:32:56AM -0500, Bill McGonigle wrote: > > u5 - Indigo 2 "Impact 10000" (purple) > scsi disk 0,1 2.27 GB > scsi disk 0,2 9.15 GB > scsi disk 0,3 cdrom > Irix Audio Processor: Version A2 > 1 195 MHZ IP22 Processor ^^^^ > FPU: MIPS R10010 Floating Point Coprocessor 0.0 > CPU: MIPS R10000 Processor Chip rev. 2.5 ^^^^^^ Can this be possible? Florian From owner-linux-mips@oss.sgi.com Sat Mar 17 07:47:30 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2HFlUs28067 for linux-mips-outgoing; Sat, 17 Mar 2001 07:47:30 -0800 Received: from boco.fee.vutbr.cz (boco.fee.vutbr.cz [147.229.9.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2HFlTM28064 for ; Sat, 17 Mar 2001 07:47:29 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f2HFlQt47888 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Sat, 17 Mar 2001 16:47:27 +0100 (CET) Received: (from xjezda00@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f2HFlQF86608; Sat, 17 Mar 2001 16:47:26 +0100 (CET) Date: Sat, 17 Mar 2001 16:47:26 +0100 From: David Jez To: Karel van Houten Cc: linux-mips@oss.sgi.com Subject: Re: rpm crashing on RH 7.0 indy Message-ID: <20010317164726.B86495@stud.fee.vutbr.cz> References: <200103171051.LAA04852@pandora.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200103171051.LAA04852@pandora.research.kpn.com>; from K.H.C.vanHouten@kpn.com on Sat, Mar 17, 2001 at 11:51:19AM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 839 Lines: 28 On Sat, Mar 17, 2001 at 11:51:19AM +0100, Karel van Houten wrote: > Hi all, > > I hope someone can help me with this problem... > > I've installed an Indy with Ralfs Redhat/test-7.0 packages. > Most things work OK, but rpm itself crashes when installing > a package. Here is a trace of what happens: > > This is a static rpm binary, so I don't understand why it tries > do dynaload anything at all... Hi, Ooops, i think: haven't you got broken rpm? Have you downloaded the rpm complete? Try checksum or md5. > > Thanks in advance, > -- > Karel van Houten Hope you will be succeded, Dave -- ------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: dave.jez@seznam.cz PGP key: finger xjezda00@fest.stud.fee.vutbr.cz ---------=[ ~EOF ]=------------------------------------ From owner-linux-mips@oss.sgi.com Sat Mar 17 09:39:26 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2HHdQ629530 for linux-mips-outgoing; Sat, 17 Mar 2001 09:39:26 -0800 Received: from mail.foobazco.org (snowman.foobazco.org [198.144.194.230]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2HHdPM29527 for ; Sat, 17 Mar 2001 09:39:25 -0800 Received: from galt.foobazco.org (galt.foobazco.org [198.144.194.227]) by mail.foobazco.org (Postfix) with ESMTP id AB552109CE; Sat, 17 Mar 2001 09:39:47 -0800 (PST) Received: by galt.foobazco.org (Postfix, from userid 1014) id 1F81A1F429; Sat, 17 Mar 2001 09:39:20 -0800 (PST) Date: Sat, 17 Mar 2001 09:39:19 -0800 From: Keith M Wesolowski To: David Jez Cc: Karel van Houten , linux-mips@oss.sgi.com Subject: Re: rpm crashing on RH 7.0 indy Message-ID: <20010317093919.A19754@foobazco.org> References: <200103171051.LAA04852@pandora.research.kpn.com> <20010317164726.B86495@stud.fee.vutbr.cz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010317164726.B86495@stud.fee.vutbr.cz>; from dave.jez@seznam.cz on Sat, Mar 17, 2001 at 04:47:26PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 889 Lines: 20 On Sat, Mar 17, 2001 at 04:47:26PM +0100, David Jez wrote: > > This is a static rpm binary, so I don't understand why it tries > > do dynaload anything at all... > Hi, > > Ooops, i think: haven't you got broken rpm? Have you downloaded the rpm > complete? Try checksum or md5. That's not the problem. The problem is that static binaries which use libdl used to be (and perhaps still are) broken. The reason it's using libdl is that the nss libraries are never truly static, unless you compile glibc with a special non-recommended option. I have indications that this may be fixed in glibc 2.2.2 using my current toolchain, but my information is not complete. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Sat Mar 17 12:32:08 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2HKW8w32500 for linux-mips-outgoing; Sat, 17 Mar 2001 12:32:08 -0800 Received: from web10507.mail.yahoo.com (web10507.mail.yahoo.com [216.136.130.157]) by oss.sgi.com (8.11.3/8.11.3) with SMTP id f2HKW7M32497 for ; Sat, 17 Mar 2001 12:32:07 -0800 Message-ID: <20010317203207.54631.qmail@web10507.mail.yahoo.com> Received: from [63.22.96.13] by web10507.mail.yahoo.com; Sat, 17 Mar 2001 12:32:07 PST Date: Sat, 17 Mar 2001 12:32:07 -0800 (PST) From: m b Subject: Linux on SGI Indigo and Indigo2 To: linux-mips@oss.sgi.com MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 269 Lines: 12 Hi, I have an Indigo and an Indigo 2 and want to run Linux. Someone told me to ask here. Can anyone help? Thanks, Marc __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/ From owner-linux-mips@oss.sgi.com Sun Mar 18 07:32:18 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2IFWIW14246 for linux-mips-outgoing; Sun, 18 Mar 2001 07:32:18 -0800 Received: from boco.fee.vutbr.cz (boco.fee.vutbr.cz [147.229.9.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2IFWHM14243 for ; Sun, 18 Mar 2001 07:32:17 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f2IFWCt12317 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK) for ; Sun, 18 Mar 2001 16:32:14 +0100 (CET) Received: (from xmichl03@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f2IFWB218968; Sun, 18 Mar 2001 16:32:11 +0100 (CET) From: Michl Ladislav Date: Sun, 18 Mar 2001 16:32:11 +0100 (CET) X-processed: pine.send To: Subject: arc cmdline.c Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1815 Lines: 67 hi all, i have some beginner questions, so please be patient with me :-) 1) quoting indy-hd-boot-micro-howto.html: O.k. we're almost there. The last thing to do is to tell the PROM which file to boot on power up: [snip] setenv OSLoader linux setenv SystemPartition scsi(0)disk(1)rdisk(0)partition(8) setenv OSLoadPartition /dev/sda1 but OSLoadPartition is ignored, so this no loger works. does it mean that i have to use setenv root /dev/sda1 instead? hmm, i really hate gotos :-( --- cmdline.c.orig Sun Mar 18 15:26:02 2001 +++ cmdline.c Sun Mar 18 15:46:22 2001 @@ -34,23 +34,18 @@ char *cp; int actr, i; - actr = 1; /* Always ignore argv[0] */ - cp = &(arcs_cmdline[0]); - while(actr < prom_argc) { - for(i = 0; i < NENTS(ignored); i++) { - int len = strlen(ignored[i]); - - if(!strncmp(prom_argv[actr], ignored[i], len)) - goto pic_cont; + + /* Always ignore argv[0] */ + for (actr = 1; actr < prom_argc; actr++) { + for (i = 0; i < NENTS(ignored); i++) { + if (strncmp(prom_argv[actr], ignored[i], strlen(ignored[i]))) { + /* Ok, we want it. */ + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + } } - /* Ok, we want it. */ - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - - pic_cont: - actr++; } if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ --cp; 2) i also don't understand directory layout in arch/mips. i expected indy's prom cmdline in arch/mips/sgi/prom, but found it in arch/mips/arc. is there any historical (or other) reason for this? 3) what compiler are you using? compilation of glibc2.2.2 with gcc 2.95.2 took about 11 (!) hours on 100 MHz Indy, ie much more than on i486. now i'm trying build gcc 3.0 from cvs, i hope it helps. thanks for explanation, ladis From owner-linux-mips@oss.sgi.com Sun Mar 18 18:37:29 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2J2bTn21729 for linux-mips-outgoing; Sun, 18 Mar 2001 18:37:29 -0800 Received: from ibbserver.ibb.uu.nl (IDENT:mail@ibbserver.ibb.uu.nl [131.211.124.6]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2J2bRM21726 for ; Sun, 18 Mar 2001 18:37:27 -0800 Received: from leander.ibb.uu.nl (ibb0100.ibb.uu.nl [131.211.124.100]) by ibbserver.ibb.uu.nl (Postfix) with ESMTP id 2BB0E124B3; Mon, 19 Mar 2001 03:37:25 +0100 (CET) Message-Id: <5.0.2.1.2.20010319031124.00af61a0@pop.med.uu.nl> X-Sender: leander@131.211.124.6 X-Mailer: QUALCOMM Windows Eudora Version 5.0.2 Date: Mon, 19 Mar 2001 03:36:54 +0100 To: debian-mips@lists.debian.org, linux-mips@oss.sgi.com From: Leander Koornneef Subject: Trouble booting my indy Mime-Version: 1.0 Content-Type: multipart/alternative; boundary="=====================_2493078==_.ALT" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3676 Lines: 94 --=====================_2493078==_.ALT Content-Type: text/plain; charset="us-ascii"; format=flowed Hi there, I acquired an indy recently. I spent some time reading emails in these lists and some documentation available on the internet. So now, finally came the time to really try and install debian-mips on this machine. I booted my Mandrake linux box and setup everything according to http://staf.digibel.org/topic.php?lang=eng&top=indy Now, I fired up the indy and gave the command: 'boot -f bootp()vmlinux-2.4.0-test6-pre8.ecoff init=/bin/bash nfsroot=192.168.0.1:/indy' I got the following: 'Setting $netaddr to 192.168.0.2 ( from server)' Which is nice :-) Then, nothing happens for a minute or two after which I get the mesage: 'Unable to load bootp()vmlinux-2.4.0-test6-pre8.ecoff ''bootp()vmlinux-2.4.0-test6-pre8.ecoff'' is not a valid file to boot' As far as I can tell, the tftp daemon is running and /indy is exported In the logs it says: Mar 19 02:39:06 leander dhcpd: data: lease_time: lease ends at 0 when it is now 984965946 Mar 19 02:39:06 leander dhcpd: BOOTREQUEST from 08:00:69:09:64:09 via eth0 Mar 19 02:39:06 leander dhcpd: BOOTREPLY for 192.168.0.2 to indy (08:00:69:09:64:09) via eth0 And that's it :-( I read something about problems with tftpd running on linux >= 2.3, but my boot server is running 2.2.18. I hope someone can help me finally boot my indy.... By the way, it's an R5000pc (150MHz) Many thanks in advance, Leander Koornneef --=====================_2493078==_.ALT Content-Type: text/html; charset="us-ascii" Hi there,

I acquired an indy recently. I spent some time reading emails in these lists and some documentation available on the internet.
So now, finally came the time to really try and install debian-mips on this machine.
I booted my Mandrake linux box and setup everything according to http://staf.digibel.org/topic.php?lang=eng&top=indy
Now, I fired up the indy and gave the command:
        'boot -f bootp()vmlinux-2.4.0-test6-pre8.ecoff init=/bin/bash nfsroot=192.168.0.1:/indy'

I got the following:
        'Setting $netaddr to 192.168.0.2 ( from server)'

Which is nice :-)
Then, nothing happens for a minute or two after which I get the mesage:
        'Unable to load bootp()vmlinux-2.4.0-test6-pre8.ecoff ''bootp()vmlinux-2.4.0-test6-pre8.ecoff'' is not a valid file to boot'

As far as I can tell, the tftp daemon is running and /indy is exported
In the logs it says:
        Mar 19 02:39:06 leander dhcpd: data: lease_time: lease ends at 0 when it is now 984965946
        Mar 19 02:39:06 leander dhcpd: BOOTREQUEST from 08:00:69:09:64:09 via eth0
        Mar 19 02:39:06 leander dhcpd: BOOTREPLY for 192.168.0.2 to indy (08:00:69:09:64:09) via eth0
And that's it :-(
I read something about problems with tftpd running on linux >= 2.3, but my boot server is running 2.2.18.
I hope someone can help me finally boot my indy....
By the way, it's an R5000pc (150MHz)

Many thanks in advance,

Leander Koornneef
--=====================_2493078==_.ALT-- From owner-linux-mips@oss.sgi.com Mon Mar 19 06:07:49 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JE7nH31733 for linux-mips-outgoing; Mon, 19 Mar 2001 06:07:49 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JE7mM31730 for ; Mon, 19 Mar 2001 06:07:48 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id GAA05551 for ; Mon, 19 Mar 2001 06:07:48 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id GAA00622 for ; Mon, 19 Mar 2001 06:07:46 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id PAA02100 for ; Mon, 19 Mar 2001 15:07:15 +0100 (MET) Message-ID: <3AB61293.5652407C@mips.com> Date: Mon, 19 Mar 2001 15:07:15 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Bug in the _save_fp_context. Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1142 Lines: 35 I think there is a bug in the _save_fp_context function in arch/mips/kernel/r4k_fpu.S The problem is the following piece of code: jr ra .set nomacro EX(sw t0,SC_FPC_EIR(a0)) nop .set macro First of all what should the ".set nomacro" do? If it means that the EX macro shouldn't be used then this entry wouldn't get into __ex_table, which would be wrong. But it look like it uses the macro anyway, regardless of the ".set nomacro", at least with the compiler I use. Never the less we do not handle entries in the __ex_table which is located in a branch delay. So we need to handle the situation where we take a page fault on an instruction which is located in a brach delay slot, or we don't put the "potential" faulting instruction in a delay slot. Any ideas, how we should handle this in a nice and clean way? /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Mon Mar 19 07:39:20 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JFdKL01110 for linux-mips-outgoing; Mon, 19 Mar 2001 07:39:20 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JFdKM01107 for ; Mon, 19 Mar 2001 07:39:20 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id HAA06334 for ; Mon, 19 Mar 2001 07:39:19 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id HAA02840; Mon, 19 Mar 2001 07:39:15 -0800 (PST) Message-ID: <00e901c0b08b$50bed400$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Carsten Langgaard" , References: <3AB61293.5652407C@mips.com> Subject: Re: Bug in the _save_fp_context. Date: Mon, 19 Mar 2001 16:43:07 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2190 Lines: 57 > I think there is a bug in the _save_fp_context function in > arch/mips/kernel/r4k_fpu.S > > The problem is the following piece of code: > > jr ra > .set nomacro > EX(sw t0,SC_FPC_EIR(a0)) > nop > .set macro > > First of all what should the ".set nomacro" do? > If it means that the EX macro shouldn't be used then this entry wouldn't > get into __ex_table, which would be wrong. > But it look like it uses the macro anyway, regardless of the ".set > nomacro", at least with the compiler I use. Not surprising, really. "EX" is presumably a cpp macro that gets expanded by gcc from the .S file, based on some include file. .set directives affect only the assembler, and would inhibit assembler-level macros only. I'm not sure just what the definition of an assembler macro would be - it may or may not include pseudo-instructions like "la" or "li 32_bit_constant". I *think* that what the author was trying to do here was to ensure that the "sw" instruction in the EX expansion was really and truly a single instruction. > Never the less we do not handle entries in the __ex_table which is > located in a branch delay. > So we need to handle the situation where we take a page fault on an > instruction which is located in a brach delay slot, or we don't put the > "potential" faulting instruction in a delay slot. > > Any ideas, how we should handle this in a nice and clean way? Is the __ex_table really ending up in the delay slot? Just looking at the source, I have the impression that the "sw t0,..." instruction should be in the delay slot, followed by the __ex_table. On another topic, now that I've patched the kernel to turn off the stupid stuck interrupt on my Malta board, I've realized that I can't just connect my old Atlas SCSI disk. I'm torn between ordering a Tekram 390 PCI SCSI card, which should be able to use our "MIPS safe" NCR driver as-is (I hope) and buying an IDE disk and going through the network install ritual. Which do you recommend? One thing I really never knew was just what kernel config options I need to select to build a kernel that can do the NFS-root bootstrap. Can you help me there? Regards, Kevin K. From owner-linux-mips@oss.sgi.com Mon Mar 19 07:59:53 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JFxro01724 for linux-mips-outgoing; Mon, 19 Mar 2001 07:59:53 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JFxqM01721 for ; Mon, 19 Mar 2001 07:59:52 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id HAA06507 for ; Mon, 19 Mar 2001 07:59:52 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id HAA03322 for ; Mon, 19 Mar 2001 07:59:50 -0800 (PST) Message-ID: <00f901c0b08e$3099bc00$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: References: <3AB61293.5652407C@mips.com> <00e901c0b08b$50bed400$0deca8c0@Ulysses> Subject: Re: Bug in the _save_fp_context. Date: Mon, 19 Mar 2001 17:03:49 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2723 Lines: 72 Oops! I hadn't noticed that Carsten had copied the Linux-MIPS mailing list on this, so I treated it as a point-to-point communication. The rest of you can ignore my last paragraph! Kevin K. ----- Original Message ----- From: "Kevin D. Kissell" To: "Carsten Langgaard" ; Sent: Monday, March 19, 2001 4:43 PM Subject: Re: Bug in the _save_fp_context. > > I think there is a bug in the _save_fp_context function in > > arch/mips/kernel/r4k_fpu.S > > > > The problem is the following piece of code: > > > > jr ra > > .set nomacro > > EX(sw t0,SC_FPC_EIR(a0)) > > nop > > .set macro > > > > First of all what should the ".set nomacro" do? > > If it means that the EX macro shouldn't be used then this entry wouldn't > > get into __ex_table, which would be wrong. > > But it look like it uses the macro anyway, regardless of the ".set > > nomacro", at least with the compiler I use. > > Not surprising, really. "EX" is presumably a cpp macro > that gets expanded by gcc from the .S file, based on > some include file. .set directives affect only the assembler, > and would inhibit assembler-level macros only. I'm not > sure just what the definition of an assembler macro > would be - it may or may not include pseudo-instructions > like "la" or "li 32_bit_constant". I *think* that what the > author was trying to do here was to ensure that the > "sw" instruction in the EX expansion was really and > truly a single instruction. > > > Never the less we do not handle entries in the __ex_table which is > > located in a branch delay. > > So we need to handle the situation where we take a page fault on an > > instruction which is located in a brach delay slot, or we don't put the > > "potential" faulting instruction in a delay slot. > > > > Any ideas, how we should handle this in a nice and clean way? > > Is the __ex_table really ending up in the delay slot? > Just looking at the source, I have the impression > that the "sw t0,..." instruction should be in the delay > slot, followed by the __ex_table. > > On another topic, now that I've patched the kernel to > turn off the stupid stuck interrupt on my Malta board, > I've realized that I can't just connect my old Atlas SCSI > disk. I'm torn between ordering a Tekram 390 PCI > SCSI card, which should be able to use our "MIPS > safe" NCR driver as-is (I hope) and buying an IDE > disk and going through the network install ritual. > Which do you recommend? One thing I really never > knew was just what kernel config options I need to > select to build a kernel that can do the NFS-root > bootstrap. Can you help me there? > > Regards, > > Kevin K. > From owner-linux-mips@oss.sgi.com Mon Mar 19 08:13:41 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JGDfo02086 for linux-mips-outgoing; Mon, 19 Mar 2001 08:13:41 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JGDeM02083 for ; Mon, 19 Mar 2001 08:13:40 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id IAA06666 for ; Mon, 19 Mar 2001 08:13:40 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id IAA03736; Mon, 19 Mar 2001 08:13:38 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id RAA09554; Mon, 19 Mar 2001 17:13:07 +0100 (MET) Message-ID: <3AB63012.B2DF9CD6@mips.com> Date: Mon, 19 Mar 2001 17:13:06 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com Subject: Re: Bug in the _save_fp_context. References: <3AB61293.5652407C@mips.com> <00e901c0b08b$50bed400$0deca8c0@Ulysses> Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3045 Lines: 81 "Kevin D. Kissell" wrote: > > I think there is a bug in the _save_fp_context function in > > arch/mips/kernel/r4k_fpu.S > > > > The problem is the following piece of code: > > > > jr ra > > .set nomacro > > EX(sw t0,SC_FPC_EIR(a0)) > > nop > > .set macro > > > > First of all what should the ".set nomacro" do? > > If it means that the EX macro shouldn't be used then this entry wouldn't > > get into __ex_table, which would be wrong. > > But it look like it uses the macro anyway, regardless of the ".set > > nomacro", at least with the compiler I use. > > Not surprising, really. "EX" is presumably a cpp macro > that gets expanded by gcc from the .S file, based on > some include file. .set directives affect only the assembler, > and would inhibit assembler-level macros only. I'm not > sure just what the definition of an assembler macro > would be - it may or may not include pseudo-instructions > like "la" or "li 32_bit_constant". I *think* that what the > author was trying to do here was to ensure that the > "sw" instruction in the EX expansion was really and > truly a single instruction. > > > Never the less we do not handle entries in the __ex_table which is > > located in a branch delay. > > So we need to handle the situation where we take a page fault on an > > instruction which is located in a brach delay slot, or we don't put the > > "potential" faulting instruction in a delay slot. > > > > Any ideas, how we should handle this in a nice and clean way? > > Is the __ex_table really ending up in the delay slot? > Just looking at the source, I have the impression > that the "sw t0,..." instruction should be in the delay > slot, followed by the __ex_table. The problem is that the address of the delay slot is put in the __ex_table and then we take a page fault EPC is pointing at the jr instruction and not the delay slot. This result in a miss match when we try to lookup in __ex_table, resulting in a kernel crash. The faulting situation look like this: EPC = address of delay slot entry in __ex_table = address of delay slot - 4 Hopes that clarify it a bit more. > > On another topic, now that I've patched the kernel to > turn off the stupid stuck interrupt on my Malta board, > I've realized that I can't just connect my old Atlas SCSI > disk. I'm torn between ordering a Tekram 390 PCI > SCSI card, which should be able to use our "MIPS > safe" NCR driver as-is (I hope) and buying an IDE > disk and going through the network install ritual. > Which do you recommend? One thing I really never > knew was just what kernel config options I need to > select to build a kernel that can do the NFS-root > bootstrap. Can you help me there? > > Regards, > > Kevin K. -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Mon Mar 19 10:14:01 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JIE1705220 for linux-mips-outgoing; Mon, 19 Mar 2001 10:14:01 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JIE1M05217 for ; Mon, 19 Mar 2001 10:14:01 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2JI8u303447; Mon, 19 Mar 2001 10:08:56 -0800 Message-ID: <3AB64B83.B645CCB@mvista.com> Date: Mon, 19 Mar 2001 10:10:11 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: Carsten Langgaard , linux-mips@oss.sgi.com Subject: SCSI card [Re: Bug in the _save_fp_context.] References: <3AB61293.5652407C@mips.com> <00e901c0b08b$50bed400$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1236 Lines: 33 "Kevin D. Kissell" wrote: > On another topic, now that I've patched the kernel to > turn off the stupid stuck interrupt on my Malta board, > I've realized that I can't just connect my old Atlas SCSI > disk. I'm torn between ordering a Tekram 390 PCI > SCSI card, which should be able to use our "MIPS > safe" NCR driver as-is (I hope) and buying an IDE > disk and going through the network install ritual. > Which do you recommend? One thing I really never > knew was just what kernel config options I need to > select to build a kernel that can do the NFS-root > bootstrap. Can you help me there? > Kevin, If you store your kernel image on flash and boots from there, using a local hard disk is not a bad idea. I recently used a SCSI card based on NCR 53C895A. I have to turn off some optimization in the driver in order to get it work. See some related configs below. CONFIG_SCSI_NCR53C8XX=y # CONFIG_SCSI_SYM53C8XX is not set CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=0 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=0 In general NFS root is always easier to get kernel going. Many defconfigs under arch/mips/ already have NFS root fs configured as default, at least in the two I put in, DDB5476 and ocelot. Jun From owner-linux-mips@oss.sgi.com Mon Mar 19 10:18:44 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JIIit05592 for linux-mips-outgoing; Mon, 19 Mar 2001 10:18:44 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JIIiM05589 for ; Mon, 19 Mar 2001 10:18:44 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2JIDe303864; Mon, 19 Mar 2001 10:13:40 -0800 Message-ID: <3AB64C9F.E11521DC@mvista.com> Date: Mon, 19 Mar 2001 10:14:55 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com Subject: Re: Bug in the _save_fp_context. References: <3AB61293.5652407C@mips.com> <00e901c0b08b$50bed400$0deca8c0@Ulysses> <00f901c0b08e$3099bc00$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 303 Lines: 13 "Kevin D. Kissell" wrote: > > Oops! I hadn't noticed that Carsten had copied the > Linux-MIPS mailing list on this, so I treated it as a > point-to-point communication. The rest of you can > ignore my last paragraph! > > Kevin K. > Oops! Please ignore my previous reply too. :-) Jun From owner-linux-mips@oss.sgi.com Mon Mar 19 14:53:22 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2JMrMv11724 for linux-mips-outgoing; Mon, 19 Mar 2001 14:53:22 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2JMrMM11721 for ; Mon, 19 Mar 2001 14:53:22 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2JMmI326581; Mon, 19 Mar 2001 14:48:18 -0800 Message-ID: <3AB68CFC.A2840808@mvista.com> Date: Mon, 19 Mar 2001 14:49:32 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: gdb 5.0 display arguments problem Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1246 Lines: 33 I am using gdb 5.0 client to debug kernel, and found a bug in gdb 5.0 when it trys to display an function argument. The following is the relavent code segment where breakpoint is set to the first instruction of serial_console_write(). 00000000801270ac : 801270ac: 3c04801d lui $a0,0x801d 801270b0: 8c84bc1c lw $a0,-17380($a0) 801270b4: 27bdffc0 addiu $sp,$sp,-64 801270b8: afb40028 sw $s4,40($sp) 801270bc: 00a0a021 move $s4,$a1 801270c0: 24050001 li $a1,1 For whatever reason gdb client on the host side apparently thinks the second arg is stored in register s4. When the breakpoint is hit, gdb tries to display the value of s4 (which is 0x4 in this case). Since the type of this argument is char *, gdb further tries to read the content at 0x4 which causes kernel panic. I believe I have seen this problem before (and in most case the symptom is wrong argument values instead of kernel panic). Does someone have an idea how to fix it or work around it? Does this problem exist in native debugging? I assume we can disable gdb to display char strings by default. Does someone know how to do it? Thanks. Jun From owner-linux-mips@oss.sgi.com Mon Mar 19 16:14:15 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2K0EFQ13333 for linux-mips-outgoing; Mon, 19 Mar 2001 16:14:15 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2K0EEM13330 for ; Mon, 19 Mar 2001 16:14:14 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id QAA12375; Mon, 19 Mar 2001 16:14:14 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id QAA21348; Mon, 19 Mar 2001 16:14:11 -0800 (PST) Message-ID: <01e701c0b0d3$3fca8980$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" , References: <3AB68CFC.A2840808@mvista.com> Subject: Re: gdb 5.0 display arguments problem Date: Tue, 20 Mar 2001 01:18:02 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2613 Lines: 59 > I am using gdb 5.0 client to debug kernel, and found a bug in gdb 5.0 when it > trys to display an function argument. ... > For whatever reason gdb client on the host side apparently thinks the second > arg is stored in register s4. When the breakpoint is hit, gdb tries to > display the value of s4 (which is 0x4 in this case). Since the type of this > argument is char *, gdb further tries to read the content at 0x4 which causes > kernel panic. > > I believe I have seen this problem before (and in most case the symptom is > wrong argument values instead of kernel panic). Does someone have an idea how > to fix it or work around it? I had exactly the same problem with earlier versions of gdb (4.18 if I recall), though for me the problem was invariably provoked by my asking "where" on a deeply nested set of stack frames. I had always believed that the problem stemmed from the fact that the compiler, when invoked with the options used to build the Linux kernel in any case, is under no obligation to preserve the values of its incoming arguments past their useful life within the called function. If the arguments are consumed before the next use of the register, they are never saved. So sooner or later, the back trace comes to a function for which the argument storage on the stack frame is uninitialized garbage. That problem should, in theory, be fixable by compiling with a set of options that force the arguments to be stored in the stack frame. Yours may well be slightly different, but fatal for the same reason. > Does this problem exist in native debugging? Yes, but in that case all you get is a bogus reported argument. The problem is that the kgdb "agent" in the kernel is being passed a bogus pointer, and is dereferencing it mindlessly (and fatally). > I assume we can disable gdb to display char strings by default. Does someone > know how to do it? I tried fixing it with a hack to the exception handling code, inspired by the old Cobalt MIPS kernel code, such that the kgdb agent's proxy references could fail in a non-fatal manner. I never did get it to work. It probably would be easy to cripple gdb to not automatically dereference pointer arguments, perhaps only in remote mode and perhaps only if some magic flag is set. But it *is* nice to see the string arguments when they are sane. A cleaner approach might be to have the proxy use a high level VM routine to check the validity of each address before dereferencing, but it's not clear that it's actually safe to invoke such routines from the level at which the kgdb proxy is executing. Kevin K. From owner-linux-mips@oss.sgi.com Mon Mar 19 18:57:46 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2K2vkM16425 for linux-mips-outgoing; Mon, 19 Mar 2001 18:57:46 -0800 Received: from surfers.oz.agile.tv (agile-50.OntheNet.com.au [203.144.13.50]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2K2vhM16421 for ; Mon, 19 Mar 2001 18:57:44 -0800 Received: from oz.agile.tv (IDENT:simong@pacific.oz.agile.tv [192.168.16.16]) by surfers.oz.agile.tv (8.11.0/8.11.0) with ESMTP id f2K2vgw29946 for ; Tue, 20 Mar 2001 12:57:42 +1000 Message-ID: <3AB6C948.7F8EE4B7@oz.agile.tv> Date: Tue, 20 Mar 2001 13:06:48 +1000 From: Simon Gee X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Recommended toolchain Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 444 Lines: 13 Hello, Recently I've been working with various version mixes of the gnu tool chain for a mipsel-linux target and settled on a patchy binutils 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the functionality that I would get from a newer toolchain for use with the linux 2.4 kernel. As a result, I was wondering if someone could recommend the latest "stable"/recommended toolchain for a mipsel-linux target. Thanks in advance, Simon From owner-linux-mips@oss.sgi.com Tue Mar 20 01:05:54 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2K95s221919 for linux-mips-outgoing; Tue, 20 Mar 2001 01:05:54 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2K95rM21916 for ; Tue, 20 Mar 2001 01:05:53 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA15851; Tue, 20 Mar 2001 01:05:53 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id BAA03412; Tue, 20 Mar 2001 01:05:50 -0800 (PST) Message-ID: <004601c0b11d$86340d20$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Kevin D. Kissell" , "Jun Sun" , References: <3AB68CFC.A2840808@mvista.com> <01e701c0b0d3$3fca8980$0deca8c0@Ulysses> Subject: Re: gdb 5.0 display arguments problem Date: Tue, 20 Mar 2001 10:09:50 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3315 Lines: 71 Followups on my own message of last night. > I had exactly the same problem with earlier versions of gdb (4.18 > if I recall), though for me the problem was invariably provoked by my > asking "where" on a deeply nested set of stack frames. I had always > believed that the problem stemmed from the fact that the compiler, > when invoked with the options used to build the Linux kernel in any > case, is under no obligation to preserve the values of its incoming > arguments past their useful life within the called function. If the > arguments are consumed before the next use of the register, > they are never saved. So sooner or later, the back trace comes to > a function for which the argument storage on the stack frame is > uninitialized garbage. > > That problem should, in theory, be fixable by compiling with > a set of options that force the arguments to be stored in the > stack frame. I've experimented around a bit, and so far, the only way I can find that ensures that the argument values are preserved all the way back down a calling chain is to use no "-O" optimisation whatsoever. The code us huge and grotesque, but arguments are systematically saved in the stack frame in their allotted, caller-allocated slots. Even then I also need to compile with -g if I want gdb (native 4.17) to be able to do a correct backtrace even of user-mode code. > Yours may well be slightly different, but fatal for the same reason. Indeed, I wonder if your gdb isn't looking on the stack frame for an argument that isn't there - and which may never be there - and finding the value that also happens to be in s4. > > Does this problem exist in native debugging? > > Yes, but in most cases all you get is a bogus reported argument. Or a truncated back trace. In the worst case, you do get a gdb crash/core dump. > The problem is that the kgdb "agent" in the kernel is being passed > a bogus pointer, and is dereferencing it mindlessly (and fatally). > > > I assume we can disable gdb to display char strings by default. > > Does someone know how to do it? > > I tried fixing it with a hack to the exception handling code, > inspired by the old Cobalt MIPS kernel code, such that the > kgdb agent's proxy references could fail in a non-fatal manner. > I never did get it to work. It probably would be easy to cripple > gdb to not automatically dereference pointer arguments, perhaps > only in remote mode and perhaps only if some magic flag is set. > But it *is* nice to see the string arguments when they are sane. > A cleaner approach might be to have the proxy use a high level > VM routine to check the validity of each address before > dereferencing, but it's not clear that it's actually safe to invoke > such routines from the level at which the kgdb proxy is executing. Another reason to fix things in the gdb proxy/exception code rather than cripple gdb backtrace is that, even with the backtrace fixed, the current kgdb situation is such that the slightest typo at the debugger operator interface can generate a bad address and blow the system sky high. It's happened to me on more than one occasion. Fortunately, what I was debugging at the time was readily reproduceable (if not, I would have fixed the kgdb problem then and there!). Regards, Kevin K. From owner-linux-mips@oss.sgi.com Tue Mar 20 11:30:44 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2KJUi300884 for linux-mips-outgoing; Tue, 20 Mar 2001 11:30:44 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2KJUhM00881 for ; Tue, 20 Mar 2001 11:30:43 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2KJRT023125; Tue, 20 Mar 2001 11:27:30 -0800 Message-ID: <3AB7AEFD.5B773122@mvista.com> Date: Tue, 20 Mar 2001 11:26:53 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com Subject: Re: gdb 5.0 display arguments problem References: <3AB68CFC.A2840808@mvista.com> <01e701c0b0d3$3fca8980$0deca8c0@Ulysses> <004601c0b11d$86340d20$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1790 Lines: 39 "Kevin D. Kissell" wrote: > > > Yours may well be slightly different, but fatal for the same reason. > > Indeed, I wonder if your gdb isn't looking on the stack frame > for an argument that isn't there - and which may never be > there - and finding the value that also happens to be in s4. > I think I figured out the reason. If you take a look of the code segment I attached in my first posting, you will see that s4 register indeed holds the value of a1, and presummably remains so for the rest of the function. However, the actual assignment of a1 to s4 does not happen until a couple of instructions later into the function. So if the breakpoint is set at the first instruction of the function, gdb would still think (wrongly) s4 holds the 2nd argument and, even worse, try to dereference it if it is a char* pointer. > > Another reason to fix things in the gdb proxy/exception code > rather than cripple gdb backtrace is that, even with the backtrace > fixed, the current kgdb situation is such that the slightest typo > at the debugger operator interface can generate a bad address > and blow the system sky high. It's happened to me on more than > one occasion. Fortunately, what I was debugging at the time > was readily reproduceable (if not, I would have fixed the kgdb > problem then and there!). > This sounds pretty cool, but I don't see a clean algorithm. So in the exception code you would decide not to crash if 1)kgdb is configured, and 2) the exception is caused by kgdb code (how?). Also if you decide not to crash, what should be reasonable return values? Disable automatic char * dereferencing is not that bad. You always have the option to manually dereference it. However, I could not find such an option. Maybe gdb does not provide that yet. Jun From owner-linux-mips@oss.sgi.com Tue Mar 20 12:12:07 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2KKC7o01771 for linux-mips-outgoing; Tue, 20 Mar 2001 12:12:07 -0800 Received: from hermes.research.kpn.com (hermes.research.kpn.com [139.63.192.8]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2KKC6M01768 for ; Tue, 20 Mar 2001 12:12:06 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K1FMPIY3EA000MBZ@research.kpn.com> for linux-mips@oss.sgi.com; Tue, 20 Mar 2001 21:12:04 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id VAA07412; Tue, 20 Mar 2001 21:12:03 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Tue, 20 Mar 2001 21:12:02 +0100 (MET) From: Karel van Houten Subject: Re: Recommended toolchain In-reply-to: <3AB6C948.7F8EE4B7@oz.agile.tv> To: simong@oz.agile.tv (Simon Gee) Cc: linux-mips@oss.sgi.com Message-id: <200103202012.VAA07412@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 989 Lines: 25 Hi Simon, You wrote: > Recently I've been working with various version mixes of the gnu tool > chain for a mipsel-linux target and settled on a patchy binutils > 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the functionality > that I would get from a newer toolchain for use with the linux 2.4 > kernel. As a result, I was wondering if someone could recommend the > latest "stable"/recommended toolchain for a mipsel-linux target. Well, I'm currently using: binutils 2.10.1 gcc 2.95.3 (with Maciej's patches) glibc 2.2.2 (compiled with above toolchain). This toolchain works for native compiles on my mipsel box. One drawback: I can't compile any kernels with this setup, For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6. -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Tue Mar 20 12:46:13 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2KKkDQ02522 for linux-mips-outgoing; Tue, 20 Mar 2001 12:46:13 -0800 Received: from dea.waldorf-gmbh.de (u-194-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.194]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2KKiYM02507 for ; Tue, 20 Mar 2001 12:44:55 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2KKbFa04011; Tue, 20 Mar 2001 21:37:15 +0100 Date: Tue, 20 Mar 2001 21:37:15 +0100 From: Ralf Baechle To: Karel van Houten Cc: simong@oz.agile.tv (Simon Gee), linux-mips@oss.sgi.com Subject: Re: Recommended toolchain Message-ID: <20010320213715.C3763@bacchus.dhis.org> References: <3AB6C948.7F8EE4B7@oz.agile.tv> <200103202012.VAA07412@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200103202012.VAA07412@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Tue, Mar 20, 2001 at 09:12:02PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 925 Lines: 23 On Tue, Mar 20, 2001 at 09:12:02PM +0100, Karel van Houten wrote: > You wrote: > > Recently I've been working with various version mixes of the gnu tool > > chain for a mipsel-linux target and settled on a patchy binutils > > 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the functionality > > that I would get from a newer toolchain for use with the linux 2.4 > > kernel. As a result, I was wondering if someone could recommend the > > latest "stable"/recommended toolchain for a mipsel-linux target. > > Well, I'm currently using: > binutils 2.10.1 > gcc 2.95.3 (with Maciej's patches) > glibc 2.2.2 (compiled with above toolchain). > > This toolchain works for native compiles on my mipsel box. > One drawback: I can't compile any kernels with this setup, > For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6. You MUST use minimum egcs-2.91.66 (1.1.2); older compilers WILL misscompile kernels. Ralf From owner-linux-mips@oss.sgi.com Tue Mar 20 14:12:13 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2KMCDU04120 for linux-mips-outgoing; Tue, 20 Mar 2001 14:12:13 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2KMCCM04117 for ; Tue, 20 Mar 2001 14:12:12 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id OAA23304; Tue, 20 Mar 2001 14:12:12 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id OAA28544; Tue, 20 Mar 2001 14:12:09 -0800 (PST) Message-ID: <002d01c0b18b$5f512da0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" Cc: References: <3AB68CFC.A2840808@mvista.com> <01e701c0b0d3$3fca8980$0deca8c0@Ulysses> <004601c0b11d$86340d20$0deca8c0@Ulysses> <3AB7AEFD.5B773122@mvista.com> Subject: Re: gdb 5.0 display arguments problem Date: Tue, 20 Mar 2001 23:16:02 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2890 Lines: 67 > "Kevin D. Kissell" wrote: > > > > > Yours may well be slightly different, but fatal for the same reason. > > > > Indeed, I wonder if your gdb isn't looking on the stack frame > > for an argument that isn't there - and which may never be > > there - and finding the value that also happens to be in s4. > > > > I think I figured out the reason. If you take a look of the code segment I > attached in my first posting, you will see that s4 register indeed holds the > value of a1, and presummably remains so for the rest of the function. > However, the actual assignment of a1 to s4 does not happen until a couple of > instructions later into the function. So if the breakpoint is set at the > first instruction of the function, gdb would still think (wrongly) s4 holds > the 2nd argument and, even worse, try to dereference it if it is a char* > pointer. It's not unusual to need to step one line to "see" arguments correctly. A pity about the pointer dereference. ;-) > > Another reason to fix things in the gdb proxy/exception code > > rather than cripple gdb backtrace is that, even with the backtrace > > fixed, the current kgdb situation is such that the slightest typo > > at the debugger operator interface can generate a bad address > > and blow the system sky high. It's happened to me on more than > > one occasion. Fortunately, what I was debugging at the time > > was readily reproduceable (if not, I would have fixed the kgdb > > problem then and there!). > > > > This sounds pretty cool, but I don't see a clean algorithm. So in the > exception code you would decide not to crash if 1)kgdb is configured, and 2) > the exception is caused by kgdb code (how?). Also if you decide not to crash, > what should be reasonable return values? There are a number of possible ways of going about it. One is to set some kind of flag during the kgdb proxy access, which is tested by the page fault code. That's the stuff that's derived from Cobalt code and that is partly in place in some existing kernel gdb support ("debugmem_got_flt", etc.). I have not seen it work correcly, and isn't SMP safe. Another scheme, which is actually a bit cleaner, would be to check explicitly for the faulting address to be that of the kgdb proxy load. In any case, once the case has been identified, one tweaks the EPC value to return to something other than a repeat of the bad dereference, and returns zero or an error value to gdb - the protocol and message formats are described in comments in gdb-stub.c. > Disable automatic char * dereferencing is not that bad. You always have the > option to manually dereference it. However, I could not find such an option. > Maybe gdb does not provide that yet. And even if it did, accidentally trying to dump "0x8021f34" would blow you out of the water. It's the kernel proxy code that really needs to be fixed. Kevin K. From owner-linux-mips@oss.sgi.com Tue Mar 20 15:59:59 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2KNxxS06175 for linux-mips-outgoing; Tue, 20 Mar 2001 15:59:59 -0800 Received: from tower.ti.com (tower.ti.com [192.94.94.5]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2KNxwM06172 for ; Tue, 20 Mar 2001 15:59:58 -0800 Received: from dlep6.itg.ti.com ([157.170.188.9]) by tower.ti.com (8.11.1/8.11.1) with ESMTP id f2KNxqr06585 for ; Tue, 20 Mar 2001 17:59:52 -0600 (CST) Received: from dlep6.itg.ti.com (localhost [127.0.0.1]) by dlep6.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA28454 for ; Tue, 20 Mar 2001 17:59:52 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep6.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA28449 for ; Tue, 20 Mar 2001 17:59:51 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.126]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA08478 for ; Tue, 20 Mar 2001 17:59:51 -0600 (CST) Message-ID: <3AB7EFF7.A20E4FF3@ti.com> Date: Tue, 20 Mar 2001 17:04:07 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: Sign extended 64bit address Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 432 Lines: 11 I have run into the earlier mentioned problem of objcopy not correctly dealing with the sign extended 64 bit address generated by the new tools. Is there an update on this issue? Any good work-arounds or short time solutions? -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Tue Mar 20 19:10:24 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2L3AOW09803 for linux-mips-outgoing; Tue, 20 Mar 2001 19:10:24 -0800 Received: from vms1.rit.edu (vms1.isc.rit.edu [129.21.3.8]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2L3AMM09800 for ; Tue, 20 Mar 2001 19:10:22 -0800 Received: from nerd-box.rit.edu ([129.21.134.39]) by ritvax.isc.rit.edu (PMDF V5.2-32 #41784) with ESMTPA id <01K1FOQDF368Y8EOAF@ritvax.isc.rit.edu> for linux-mips@oss.sgi.com; Tue, 20 Mar 2001 22:10:10 EST Date: Tue, 20 Mar 2001 22:12:07 -0800 From: jsc6233@ritvax.isc.rit.edu Subject: indy R5000 with irix 6.5 X-Sender: jsc6233@vmspop.isc.rit.edu To: linux-mips@oss.sgi.com Message-id: <5.0.0.25.0.20010320221021.00a47cc0@vmspop.isc.rit.edu> MIME-version: 1.0 X-Mailer: QUALCOMM Windows Eudora Version 5.0 Content-type: text/plain; format=flowed; charset=us-ascii Content-transfer-encoding: 7BIT Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 140 Lines: 6 Hey, Has anyone been able to compile the kernel on an indy R5000 running IRIX 6.5?? I have been working with Linux 2.3.12. Thanks, James From owner-linux-mips@oss.sgi.com Tue Mar 20 20:06:36 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2L46a310877 for linux-mips-outgoing; Tue, 20 Mar 2001 20:06:36 -0800 Received: from dea.waldorf-gmbh.de (u-251-19.karlsruhe.ipdial.viaginterkom.de [62.180.19.251]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2L46XM10874 for ; Tue, 20 Mar 2001 20:06:34 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2L447j03282; Wed, 21 Mar 2001 05:04:07 +0100 Date: Wed, 21 Mar 2001 05:04:07 +0100 From: Ralf Baechle To: Brady Brown Cc: SGI news group Subject: Re: Sign extended 64bit address Message-ID: <20010321050407.A3261@bacchus.dhis.org> References: <3AB7EFF7.A20E4FF3@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AB7EFF7.A20E4FF3@ti.com>; from bbrown@ti.com on Tue, Mar 20, 2001 at 05:04:07PM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 496 Lines: 12 On Tue, Mar 20, 2001 at 05:04:07PM -0700, Brady Brown wrote: > I have run into the earlier mentioned problem of objcopy not correctly > dealing with the sign extended 64 bit address generated by the new > tools. Is there an update on this issue? Any good work-arounds or short > time solutions? I don't have your old report at hand but somewhen during the past year binutils received a number of fixes related to signed/unsigned addresses, so you should try a recent copy of binutils. Ralf From owner-linux-mips@oss.sgi.com Tue Mar 20 20:39:19 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2L4dJV11550 for linux-mips-outgoing; Tue, 20 Mar 2001 20:39:19 -0800 Received: from dea.waldorf-gmbh.de (u-251-19.karlsruhe.ipdial.viaginterkom.de [62.180.19.251]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2L4dGM11547 for ; Tue, 20 Mar 2001 20:39:16 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2L4d2U03572; Wed, 21 Mar 2001 05:39:02 +0100 Date: Wed, 21 Mar 2001 05:39:02 +0100 From: Ralf Baechle To: jsc6233@ritvax.isc.rit.edu Cc: linux-mips@oss.sgi.com Subject: Re: indy R5000 with irix 6.5 Message-ID: <20010321053901.B3261@bacchus.dhis.org> References: <5.0.0.25.0.20010320221021.00a47cc0@vmspop.isc.rit.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <5.0.0.25.0.20010320221021.00a47cc0@vmspop.isc.rit.edu>; from jsc6233@ritvax.isc.rit.edu on Tue, Mar 20, 2001 at 10:12:07PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 312 Lines: 12 On Tue, Mar 20, 2001 at 10:12:07PM -0800, jsc6233@ritvax.isc.rit.edu wrote: > Hey, > Has anyone been able to compile the kernel on an indy R5000 running IRIX > 6.5?? I have been working with Linux 2.3.12. Yes. (This answer will hardly satisfy you but it's the accurate answer to your question ...) Ralf From owner-linux-mips@oss.sgi.com Tue Mar 20 22:14:51 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2L6Ep013527 for linux-mips-outgoing; Tue, 20 Mar 2001 22:14:51 -0800 Received: from wiproecmx2.wipro.com (wiproecmx2.wipro.com [164.164.31.6]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2L6ElM13524 for ; Tue, 20 Mar 2001 22:14:48 -0800 Received: from ecvwall1.wipro.com (ecvwall1.wipro.com [192.168.181.23]) by wiproecmx2.wipro.com (8.9.3/8.9.3) with SMTP id LAA20400 for ; Wed, 21 Mar 2001 11:54:28 GMT Received: from ecvwall1.wipro.com ([192.168.181.23]) by ecmail.mail.wipro.com (Netscape Messaging Server 4.15) with SMTP id GAJANH00.BUR for ; Wed, 21 Mar 2001 11:44:05 +0530 Received: from wipro.com ([192.168.225.15]) by helium.mail.wipro.com (Netscape Messaging Server 3.6) with ESMTP id AAA5E8C for ; Wed, 21 Mar 2001 11:42:31 +0530 Message-ID: <3AB84780.1027AE90@wipro.com> Date: Wed, 21 Mar 2001 11:47:36 +0530 From: "chandra shekhar" Reply-To: chandra.shekhar@wipro.com Organization: Wipro X-Mailer: Mozilla 4.74 [en] (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: kernel-header RPM Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 148 Lines: 9 Hello I am searching for kenel-header RPM for Big Endian MIPS. Could you please tell me the location from where I can download. Regards, Chandra From owner-linux-mips@oss.sgi.com Tue Mar 20 23:58:13 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2L7wDk17636 for linux-mips-outgoing; Tue, 20 Mar 2001 23:58:13 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2L7wCM17633 for ; Tue, 20 Mar 2001 23:58:13 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id XAA27934 for ; Tue, 20 Mar 2001 23:58:13 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id XAA14201 for ; Tue, 20 Mar 2001 23:58:10 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id IAA07615 for ; Wed, 21 Mar 2001 08:57:40 +0100 (MET) Message-ID: <3AB85EF4.B9ED386B@mips.com> Date: Wed, 21 Mar 2001 08:57:40 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: [Fwd: Re: Bug in the _save_fp_context.] Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3530 Lines: 98 No one seem to answer on my previous mail, regarding the problem in the _save_fp_context function in arch/mips/kernel/r4k_fpu.S. What about you Ralf, any comments ? /Carsten -------- Original Message -------- Subject: Re: Bug in the _save_fp_context. Date: Mon, 19 Mar 2001 17:13:06 +0100 From: Carsten Langgaard To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com References: <3AB61293.5652407C@mips.com> <00e901c0b08b$50bed400$0deca8c0@Ulysses> "Kevin D. Kissell" wrote: > > I think there is a bug in the _save_fp_context function in > > arch/mips/kernel/r4k_fpu.S > > > > The problem is the following piece of code: > > > > jr ra > > .set nomacro > > EX(sw t0,SC_FPC_EIR(a0)) > > nop > > .set macro > > > > First of all what should the ".set nomacro" do? > > If it means that the EX macro shouldn't be used then this entry wouldn't > > get into __ex_table, which would be wrong. > > But it look like it uses the macro anyway, regardless of the ".set > > nomacro", at least with the compiler I use. > > Not surprising, really. "EX" is presumably a cpp macro > that gets expanded by gcc from the .S file, based on > some include file. .set directives affect only the assembler, > and would inhibit assembler-level macros only. I'm not > sure just what the definition of an assembler macro > would be - it may or may not include pseudo-instructions > like "la" or "li 32_bit_constant". I *think* that what the > author was trying to do here was to ensure that the > "sw" instruction in the EX expansion was really and > truly a single instruction. > > > Never the less we do not handle entries in the __ex_table which is > > located in a branch delay. > > So we need to handle the situation where we take a page fault on an > > instruction which is located in a brach delay slot, or we don't put the > > "potential" faulting instruction in a delay slot. > > > > Any ideas, how we should handle this in a nice and clean way? > > Is the __ex_table really ending up in the delay slot? > Just looking at the source, I have the impression > that the "sw t0,..." instruction should be in the delay > slot, followed by the __ex_table. The problem is that the address of the delay slot is put in the __ex_table and then we take a page fault EPC is pointing at the jr instruction and not the delay slot. This result in a miss match when we try to lookup in __ex_table, resulting in a kernel crash. The faulting situation look like this: EPC = address of delay slot entry in __ex_table = address of delay slot - 4 Hopes that clarify it a bit more. > > On another topic, now that I've patched the kernel to > turn off the stupid stuck interrupt on my Malta board, > I've realized that I can't just connect my old Atlas SCSI > disk. I'm torn between ordering a Tekram 390 PCI > SCSI card, which should be able to use our "MIPS > safe" NCR driver as-is (I hope) and buying an IDE > disk and going through the network install ritual. > Which do you recommend? One thing I really never > knew was just what kernel config options I need to > select to build a kernel that can do the NFS-root > bootstrap. Can you help me there? > > Regards, > > Kevin K. -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Wed Mar 21 06:01:30 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LE1UC26497 for linux-mips-outgoing; Wed, 21 Mar 2001 06:01:30 -0800 Received: from exchange1.cam.pace.co.uk (host-131-80.pace.co.uk [136.170.131.80]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LE1SM26494 for ; Wed, 21 Mar 2001 06:01:29 -0800 Received: by exchange1 with Internet Mail Service (5.5.2448.0) id ; Wed, 21 Mar 2001 14:00:24 -0000 Message-ID: <1402C4C025C4D311B50D00508B8B74E281B14D@exchange1> From: Phil Thompson To: "'linux-mips@oss.sgi.com'" Subject: RE: Recommended toolchain Date: Wed, 21 Mar 2001 14:00:22 -0000 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1431 Lines: 41 So, going back to the original question, what are the recommended versions - particularly if you are building 2.4.x kernels? Are the recomendations in the HOWTO out of date? I had to patch va-mips.h from the egcs RPM and more fixes seem to be needed before I get a kernel that compiles. Thanks, Phil -----Original Message----- From: Ralf Baechle [mailto:ralf@oss.sgi.com] Sent: 20 March 2001 20:37 To: Karel van Houten Cc: simong@oz.agile.tv; linux-mips@oss.sgi.com Subject: Re: Recommended toolchain On Tue, Mar 20, 2001 at 09:12:02PM +0100, Karel van Houten wrote: > You wrote: > > Recently I've been working with various version mixes of the gnu tool > > chain for a mipsel-linux target and settled on a patchy binutils > > 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the functionality > > that I would get from a newer toolchain for use with the linux 2.4 > > kernel. As a result, I was wondering if someone could recommend the > > latest "stable"/recommended toolchain for a mipsel-linux target. > > Well, I'm currently using: > binutils 2.10.1 > gcc 2.95.3 (with Maciej's patches) > glibc 2.2.2 (compiled with above toolchain). > > This toolchain works for native compiles on my mipsel box. > One drawback: I can't compile any kernels with this setup, > For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6. You MUST use minimum egcs-2.91.66 (1.1.2); older compilers WILL misscompile kernels. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 21 07:09:46 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LF9k929394 for linux-mips-outgoing; Wed, 21 Mar 2001 07:09:46 -0800 Received: from mta5.snfc21.pbi.net ([206.13.28.241]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LF9jM29391 for ; Wed, 21 Mar 2001 07:09:45 -0800 Received: from shaft ([209.233.126.43]) by mta5.snfc21.pbi.net (Sun Internet Mail Server sims.3.5.2000.01.05.12.18.p9) with SMTP id <0GAJ005WTZBZ1J@mta5.snfc21.pbi.net> for linux-mips@oss.sgi.com; Wed, 21 Mar 2001 07:07:11 -0800 (PST) Date: Wed, 21 Mar 2001 07:11:46 -0500 From: Erik Mullinix Subject: Re: Recommended toolchain To: Phil Thompson , linux-mips@oss.sgi.com Message-id: <001a01c0b200$1c13d5e0$0500a8c0@shaft> MIME-version: 1.0 X-Mailer: Microsoft Outlook Express 5.00.2919.6700 Content-type: text/plain; charset="iso-8859-1" Content-transfer-encoding: 7bit X-MSMail-Priority: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 References: <1402C4C025C4D311B50D00508B8B74E281B14D@exchange1> X-Priority: 3 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1725 Lines: 55 What Error's are you getting? Hesp ----- Original Message ----- From: "Phil Thompson" To: Sent: Wednesday, March 21, 2001 9:00 AM Subject: RE: Recommended toolchain > So, going back to the original question, what are the recommended versions - > particularly if you are building 2.4.x kernels? > > Are the recomendations in the HOWTO out of date? I had to patch va-mips.h > from the egcs RPM and more fixes seem to be needed before I get a kernel > that compiles. > > Thanks, > Phil > > -----Original Message----- > From: Ralf Baechle [mailto:ralf@oss.sgi.com] > Sent: 20 March 2001 20:37 > To: Karel van Houten > Cc: simong@oz.agile.tv; linux-mips@oss.sgi.com > Subject: Re: Recommended toolchain > > > On Tue, Mar 20, 2001 at 09:12:02PM +0100, Karel van Houten wrote: > > > You wrote: > > > Recently I've been working with various version mixes of the gnu tool > > > chain for a mipsel-linux target and settled on a patchy binutils > > > 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the functionality > > > that I would get from a newer toolchain for use with the linux 2.4 > > > kernel. As a result, I was wondering if someone could recommend the > > > latest "stable"/recommended toolchain for a mipsel-linux target. > > > > Well, I'm currently using: > > binutils 2.10.1 > > gcc 2.95.3 (with Maciej's patches) > > glibc 2.2.2 (compiled with above toolchain). > > > > This toolchain works for native compiles on my mipsel box. > > One drawback: I can't compile any kernels with this setup, > > For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6. > > You MUST use minimum egcs-2.91.66 (1.1.2); older compilers WILL misscompile > kernels. > > Ralf > From owner-linux-mips@oss.sgi.com Wed Mar 21 08:06:51 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LG6pu31576 for linux-mips-outgoing; Wed, 21 Mar 2001 08:06:51 -0800 Received: from mail.foobazco.org (snowman.foobazco.org [198.144.194.230]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LG6oM31573 for ; Wed, 21 Mar 2001 08:06:50 -0800 Received: from galt.foobazco.org (galt.foobazco.org [198.144.194.227]) by mail.foobazco.org (Postfix) with ESMTP id A3C24109CE; Wed, 21 Mar 2001 08:07:15 -0800 (PST) Received: by galt.foobazco.org (Postfix, from userid 1014) id E00901F429; Wed, 21 Mar 2001 08:06:47 -0800 (PST) Date: Wed, 21 Mar 2001 08:06:47 -0800 From: Keith M Wesolowski To: Phil Thompson Cc: linux-mips@oss.sgi.com Subject: Re: Recommended toolchain Message-ID: <20010321080647.A4223@foobazco.org> References: <1402C4C025C4D311B50D00508B8B74E281B14D@exchange1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1402C4C025C4D311B50D00508B8B74E281B14D@exchange1>; from Phil.Thompson@pace.co.uk on Wed, Mar 21, 2001 at 02:00:22PM -0000 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 824 Lines: 18 On Wed, Mar 21, 2001 at 02:00:22PM -0000, Phil Thompson wrote: > So, going back to the original question, what are the recommended versions - > particularly if you are building 2.4.x kernels? I don't really know that there is one. I am using the gcc 3.0 branch and binutils from CVS (2.11.90). You can find the same toolchain that's building my kernels on ftp://oss.sgi.com/pub/linux/mips/mips-linux/simple/crossdev at all times, including patches. No binaries, source and patches only. This linker has a bug in it regarding section placement, but the current cvs kernel has a workaround for it. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Wed Mar 21 08:54:54 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LGssX00697 for linux-mips-outgoing; Wed, 21 Mar 2001 08:54:54 -0800 Received: from tower.ti.com (tower.ti.com [192.94.94.5]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LGsiM00689; Wed, 21 Mar 2001 08:54:45 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by tower.ti.com (8.11.1/8.11.1) with ESMTP id f2LGscr26808; Wed, 21 Mar 2001 10:54:38 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA13329; Wed, 21 Mar 2001 10:54:37 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA13325; Wed, 21 Mar 2001 10:54:37 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.126]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA16934; Wed, 21 Mar 2001 10:54:37 -0600 (CST) Message-ID: <3AB8DDCE.CA0F16BC@ti.com> Date: Wed, 21 Mar 2001 09:58:54 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: SGI news group Subject: Re: Sign extended 64bit address References: <3AB7EFF7.A20E4FF3@ti.com> <20010321050407.A3261@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 644 Lines: 19 Ralf Baechle wrote: > On Tue, Mar 20, 2001 at 05:04:07PM -0700, Brady Brown wrote: > > > I have run into the earlier mentioned problem of objcopy not correctly > > dealing with the sign extended 64 bit address generated by the new > > tools. Is there an update on this issue? Any good work-arounds or short > > time solutions? > > I don't have your old report at hand but somewhen during the past year > binutils received a number of fixes related to signed/unsigned addresses, > so you should try a recent copy of binutils. > > Ralf I'm currently using binutils-2.10.91-2 from Maciej's site. Is there a later rev that I should look at? From owner-linux-mips@oss.sgi.com Wed Mar 21 09:10:58 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LHAw101454 for linux-mips-outgoing; Wed, 21 Mar 2001 09:10:58 -0800 Received: from dea.waldorf-gmbh.de (u-136-20.karlsruhe.ipdial.viaginterkom.de [62.180.20.136]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LHAsM01451 for ; Wed, 21 Mar 2001 09:10:55 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2LHAIN07291; Wed, 21 Mar 2001 18:10:18 +0100 Date: Wed, 21 Mar 2001 18:10:18 +0100 From: Ralf Baechle To: Brady Brown Cc: SGI news group Subject: Re: Sign extended 64bit address Message-ID: <20010321181017.A7274@bacchus.dhis.org> References: <3AB7EFF7.A20E4FF3@ti.com> <20010321050407.A3261@bacchus.dhis.org> <3AB8DDCE.CA0F16BC@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AB8DDCE.CA0F16BC@ti.com>; from bbrown@ti.com on Wed, Mar 21, 2001 at 09:58:54AM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 749 Lines: 18 On Wed, Mar 21, 2001 at 09:58:54AM -0700, Brady Brown wrote: > > > I have run into the earlier mentioned problem of objcopy not correctly > > > dealing with the sign extended 64 bit address generated by the new > > > tools. Is there an update on this issue? Any good work-arounds or short > > > time solutions? > > > > I don't have your old report at hand but somewhen during the past year > > binutils received a number of fixes related to signed/unsigned addresses, > > so you should try a recent copy of binutils. > > I'm currently using binutils-2.10.91-2 from Maciej's site. Is there a later > rev that I should look at? I was believing that that one is good; can you resend your bugreport about the sign extension problem? Thanks. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 21 09:39:49 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LHdnA02642 for linux-mips-outgoing; Wed, 21 Mar 2001 09:39:49 -0800 Received: from nilpferd.fachschaften.tu-muenchen.de (nilpferd.fachschaften.tu-muenchen.de [129.187.176.79]) by oss.sgi.com (8.11.3/8.11.3) with SMTP id f2LHdmM02639 for ; Wed, 21 Mar 2001 09:39:48 -0800 Received: (qmail 8747 invoked from network); 21 Mar 2001 17:39:46 -0000 Received: from gaia.fachschaften.tu-muenchen.de (129.187.176.73) by nilpferd.fachschaften.tu-muenchen.de with SMTP; 21 Mar 2001 17:39:46 -0000 Date: Wed, 21 Mar 2001 18:39:48 +0100 (CET) From: Adrian Bunk X-X-Sender: To: Subject: Re: Compile error with current CVS kernel In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 707 Lines: 30 Hi Ralf, the latest CVS kernel still doesn't build, but the error message has changed: <-- snip --> ... mipsel-linux-nm vmlinux | grep -v '\(compiled\)\|\(\.o$\)\|\( [aUw] \)\|\(\.\.ng$\)\|\(LASH[RL]DI\)' | sort > System.map make[1]: Entering directory `/home/bunk/Ringo/linux/arch/mips/boot' gcc -o elf2ecoff elf2ecoff.c ./elf2ecoff /home/bunk/Ringo/linux/vmlinux vmlinux.ecoff -a Sections ordering prevents a.out conversion. make[1]: *** [vmlinux.ecoff] Error 1 make[1]: Leaving directory `/home/bunk/Ringo/linux/arch/mips/boot' make: *** [boot] Error 2 <-- snip --> cu Adrian -- Nicht weil die Dinge schwierig sind wagen wir sie nicht, sondern weil wir sie nicht wagen sind sie schwierig. From owner-linux-mips@oss.sgi.com Wed Mar 21 10:47:10 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LIlA704335 for linux-mips-outgoing; Wed, 21 Mar 2001 10:47:10 -0800 Received: from exchange1.cam.pace.co.uk (host-131-80.pace.co.uk [136.170.131.80]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LIl8M04332 for ; Wed, 21 Mar 2001 10:47:08 -0800 Received: by exchange1 with Internet Mail Service (5.5.2448.0) id ; Wed, 21 Mar 2001 18:46:08 -0000 Message-ID: <1402C4C025C4D311B50D00508B8B74E281B151@exchange1> From: Phil Thompson To: "'Erik Mullinix'" , linux-mips@oss.sgi.com Subject: RE: Recommended toolchain Date: Wed, 21 Mar 2001 18:46:07 -0000 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2469 Lines: 80 I had to patch va-mips.h to #include rather than . The current errors are: - warnings about struct flock64 not being declared (it's defined in asm-mips64/fcntl.h but not asm-mips/fcntl.h) - compilation stops because loops_per_sec is undeclared as far as asm-mips/delay.h is concerned (although it seems fine in asm-mips64/delay.h). This seems to imply that the mips architecture (as opposed to mips64) isn't being maintained. Is this the case? Should I be using mips64 - but what would be the point on an embedded CPU? Thanks, Phil -----Original Message----- From: Erik Mullinix [mailto:Hesp@rainworks.org] Sent: 21 March 2001 12:12 To: Phil Thompson; linux-mips@oss.sgi.com Subject: Re: Recommended toolchain What Error's are you getting? Hesp ----- Original Message ----- From: "Phil Thompson" To: Sent: Wednesday, March 21, 2001 9:00 AM Subject: RE: Recommended toolchain > So, going back to the original question, what are the recommended versions - > particularly if you are building 2.4.x kernels? > > Are the recomendations in the HOWTO out of date? I had to patch va-mips.h > from the egcs RPM and more fixes seem to be needed before I get a kernel > that compiles. > > Thanks, > Phil > > -----Original Message----- > From: Ralf Baechle [mailto:ralf@oss.sgi.com] > Sent: 20 March 2001 20:37 > To: Karel van Houten > Cc: simong@oz.agile.tv; linux-mips@oss.sgi.com > Subject: Re: Recommended toolchain > > > On Tue, Mar 20, 2001 at 09:12:02PM +0100, Karel van Houten wrote: > > > You wrote: > > > Recently I've been working with various version mixes of the gnu tool > > > chain for a mipsel-linux target and settled on a patchy binutils > > > 2.8.1/egcs 1.1.2/glibc 2.0.6 setup. However this lacks the functionality > > > that I would get from a newer toolchain for use with the linux 2.4 > > > kernel. As a result, I was wondering if someone could recommend the > > > latest "stable"/recommended toolchain for a mipsel-linux target. > > > > Well, I'm currently using: > > binutils 2.10.1 > > gcc 2.95.3 (with Maciej's patches) > > glibc 2.2.2 (compiled with above toolchain). > > > > This toolchain works for native compiles on my mipsel box. > > One drawback: I can't compile any kernels with this setup, > > For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6. > > You MUST use minimum egcs-2.91.66 (1.1.2); older compilers WILL misscompile > kernels. > > Ralf > From owner-linux-mips@oss.sgi.com Wed Mar 21 11:11:52 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LJBql05086 for linux-mips-outgoing; Wed, 21 Mar 2001 11:11:52 -0800 Received: from jester.ti.com (jester.ti.com [192.94.94.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LJBnM05078; Wed, 21 Mar 2001 11:11:49 -0800 Received: from dlep7.itg.ti.com ([157.170.134.103]) by jester.ti.com (8.11.1/8.11.1) with ESMTP id f2LJBhD03358; Wed, 21 Mar 2001 13:11:43 -0600 (CST) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id NAA00595; Wed, 21 Mar 2001 13:11:42 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id NAA00585; Wed, 21 Mar 2001 13:11:42 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.126]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id NAA22269; Wed, 21 Mar 2001 13:11:41 -0600 (CST) Message-ID: <3AB8FDEE.95A74D61@ti.com> Date: Wed, 21 Mar 2001 12:15:58 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: SGI news group Subject: Re: Sign extended 64bit address References: <3AB7EFF7.A20E4FF3@ti.com> <20010321050407.A3261@bacchus.dhis.org> <3AB8DDCE.CA0F16BC@ti.com> <20010321181017.A7274@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1778 Lines: 42 Ralf Baechle wrote: > On Wed, Mar 21, 2001 at 09:58:54AM -0700, Brady Brown wrote: > > > > > I have run into the earlier mentioned problem of objcopy not correctly > > > > dealing with the sign extended 64 bit address generated by the new > > > > tools. Is there an update on this issue? Any good work-arounds or short > > > > time solutions? > > > > > > I don't have your old report at hand but somewhen during the past year > > > binutils received a number of fixes related to signed/unsigned addresses, > > > so you should try a recent copy of binutils. > > > > I'm currently using binutils-2.10.91-2 from Maciej's site. Is there a later > > rev that I should look at? > > I was believing that that one is good; can you resend your bugreport > about the sign extension problem? Thanks. > > Ralf Problem solved. Sorry, my oversight. The binutils are correctly handling the addresses. What happened was that the new tools created a couple of new code sections "__ex_table and __dbe_table" that were not handled by the linker script in my kernel (2.4.0-test9), hence ended up a strange low addresses. I interpreted the warnings and the 'wrong' address in the final srec as a address translation problem. Once I added these sections to the linker script the warnings and 'bad' address's went away. A second issue: The kernel built by these new tools will not boot. Complains about illegal instructions as soon as init is launched. The first address that traps is a sw inside the __bzero routine. I'll have to dig a bit here I guess. Any leads would be appreciated. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Wed Mar 21 14:05:53 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2LM5rv09243 for linux-mips-outgoing; Wed, 21 Mar 2001 14:05:53 -0800 Received: from mail.foobazco.org (snowman.foobazco.org [198.144.194.230]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2LM5qM09240 for ; Wed, 21 Mar 2001 14:05:52 -0800 Received: by mail.foobazco.org (Postfix, from userid 1014) id 66A56109CE; Wed, 21 Mar 2001 14:06:17 -0800 (PST) Date: Wed, 21 Mar 2001 14:06:16 -0800 From: Keith M Wesolowski To: Phil Thompson Cc: "'Erik Mullinix'" , linux-mips@oss.sgi.com Subject: Re: Recommended toolchain Message-ID: <20010321140616.A3956@foobazco.org> References: <1402C4C025C4D311B50D00508B8B74E281B151@exchange1> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <1402C4C025C4D311B50D00508B8B74E281B151@exchange1>; from Phil.Thompson@pace.co.uk on Wed, Mar 21, 2001 at 06:46:07PM -0000 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 898 Lines: 21 On Wed, Mar 21, 2001 at 06:46:07PM -0000, Phil Thompson wrote: > - compilation stops because loops_per_sec is undeclared as far as > asm-mips/delay.h is concerned (although it seems fine in > asm-mips64/delay.h). > > This seems to imply that the mips architecture (as opposed to mips64) isn't > being maintained. Is this the case? Should I be using mips64 - but what > would be the point on an embedded CPU? mips(32) is in fact being actively maintained. It sounds like your kernel sources may be out of date; I specifically remember removing all references to loops_per_sec in favour of loops_per_jiffy in both mips and mips64. Ask again about fcntl.h after updating... -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Wed Mar 21 23:50:16 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2M7oGb21456 for linux-mips-outgoing; Wed, 21 Mar 2001 23:50:16 -0800 Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2M7oEM21453 for ; Wed, 21 Mar 2001 23:50:14 -0800 Received: from escobaria.sonytel.be (escobaria.sonytel.be [10.34.80.3]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id IAA26967; Thu, 22 Mar 2001 08:49:32 +0100 (MET) Date: Thu, 22 Mar 2001 08:49:31 +0100 (MET) From: Geert Uytterhoeven To: Phil Thompson cc: "'Erik Mullinix'" , linux-mips@oss.sgi.com Subject: RE: Recommended toolchain In-Reply-To: <1402C4C025C4D311B50D00508B8B74E281B151@exchange1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1007 Lines: 29 On Wed, 21 Mar 2001, Phil Thompson wrote: > I had to patch va-mips.h to #include rather than > . > > The current errors are: > > - warnings about struct flock64 not being declared (it's defined in > asm-mips64/fcntl.h but not asm-mips/fcntl.h) > > - compilation stops because loops_per_sec is undeclared as far as > asm-mips/delay.h is concerned (although it seems fine in > asm-mips64/delay.h). > > This seems to imply that the mips architecture (as opposed to mips64) isn't > being maintained. Is this the case? Should I be using mips64 - but what > would be the point on an embedded CPU? You're definitely not using the Linux/MIPS CVS tree, since these things were fixed there some months ago. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Thu Mar 22 00:41:36 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2M8faI23310 for linux-mips-outgoing; Thu, 22 Mar 2001 00:41:36 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2M8fZM23307 for ; Thu, 22 Mar 2001 00:41:35 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id AAA09756; Thu, 22 Mar 2001 00:41:32 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id AAA24984; Thu, 22 Mar 2001 00:41:29 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id JAA15345; Thu, 22 Mar 2001 09:40:57 +0100 (MET) Message-ID: <3AB9BA99.2599673C@mips.com> Date: Thu, 22 Mar 2001 09:40:57 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Karel van Houten CC: linux-mips@oss.sgi.com Subject: Re: rpm crashing on RH 7.0 indy References: <200103171051.LAA04852@pandora.research.kpn.com> Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3889 Lines: 84 Thanks Karel for the RH 7.0 tarball. I have install it and it seems to work fine, except for the RPM stuff. Have you or anyone else managed to get rpm to work ? We really need it to get going. /Carsten Karel van Houten wrote: > Hi all, > > I hope someone can help me with this problem... > > I've installed an Indy with Ralfs Redhat/test-7.0 packages. > Most things work OK, but rpm itself crashes when installing > a package. Here is a trace of what happens: > > (gdb) run > Starting program: /usr/src/redhat/BUILD/rpm-4.0/rpm -ihv /cdrom/mips/XFree86-dev > el-4.0.1-1lm.mips.rpm > > Program received signal SIGSEGV, Segmentation fault. > _dl_lookup_versioned_symbol (undef_name=0x2affa6af "strcpy", > undef_map=0x10075330, ref=0x7fff9818, symbol_scope=0x1007554c, > version=0x100756b0, reloc_type=3, explicit=0) at do-lookup.h:52 > 52 do-lookup.h: No such file or directory. > (gdb) bt > #0 _dl_lookup_versioned_symbol (undef_name=0x2affa6af "strcpy", > undef_map=0x10075330, ref=0x7fff9818, symbol_scope=0x1007554c, > version=0x100756b0, reloc_type=3, explicit=0) at do-lookup.h:52 > #1 0x5c30e4 in _dl_relocate_object () at ../sysdeps/mips/dl-machine.h:684 > #2 0x5b6a40 in dl_open_worker (a=0x1007554c) at dl-open.c:316 > #3 0x5b4a18 in _dl_catch_error (objname=0x7fff9a38, errstring=0x7fff9a3c, > operate=0x5b6470 , args=0x7fff9a28) at dl-error.c:149 > #4 0x5b6ca0 in _dl_open (file=0x7fff9c10 "libnss_nisplus.so.2", mode=1, > caller=0x0) at dl-open.c:380 > #5 0x58882c in do_dlopen (ptr=0x7fff9bf0) at dl-libc.c:78 > #6 0x5b4a18 in _dl_catch_error (objname=0x7fff9bc0, errstring=0x7fff9bc4, > operate=0x5887ec , args=0x7fff9bf0) at dl-error.c:149 > #7 0x5887a4 in dlerror_run (operate=0x1007554c, args=0x0) at dl-libc.c:42 > #8 0x58893c in __libc_dlopen (__name=0x1007554c "\020\b\023\230\020\b\031 ") > at dl-libc.c:104 > #9 0x57d1d0 in __nss_lookup_function (ni=0x10080b80, > fct_name=0x5e3be0 "getpwnam_r") at nsswitch.c:333 > #10 0x57c560 in __nss_lookup (ni=0x7ffff2b0, fct_name=0x5e3be0 "getpwnam_r", > fctp=0x7ffff2b4) at nsswitch.c:148 > #11 0x57e544 in __nss_passwd_lookup (ni=0x7ffff2b0, > fct_name=0x5e3be0 "getpwnam_r", fctp=0x7ffff2b4) at XXX-lookup.c:68 > #12 0x56d7d0 in __getpwnam_r (name=0x5cc34c "root", resbuf=0x10018c08, > buffer=0x10080520 "\020", buflen=1024, result=0x7ffff308) > at ../nss/getXXbyYY_r.c:159 > #13 0x56c9bc in getpwnam (name=0x5cc34c "root") at ../nss/getXXbyYY.c:127 > #14 0x42753c in installBinaryPackage (rootdir=0x1004de50 "/", db=0x1004a688, > fd=0x100a2bb8, h=0x10088890, flags=0, notify=0x438fa0 , > notifyData=0x12, pkgKey=0x7ffff9f6, actions=0x1006edb8, sharedList=0x0, > scriptFd=0x0) at install.c:941 > #15 0x449c20 in rpmRunTransactions (ts=0x1004dde8, > notify=0x438fa0 , notifyData=0x12, okProbs=0x0, > newProbs=0x7ffff6c4, transFlags=0, ignoreSet=0) at transaction.c:1701 > #16 0x439c4c in rpmInstall (rootdir=0x5c917c "/", fileArgv=0x1001faf8, > transFlags=0, interfaceFlags=2, probFilter=0, relocations=0x0) > at rpminstall.c:370 > #17 0x406a2c in main (argc=3, argv=0xffffffff) at rpm.c:1133 > #18 0x53599c in __libc_start_main (main=0x404090
, argc=3, > ubp_av=0x7ffff8d4, init=0x4000f8 <_init>, fini=0x5c6880 <_fini>, > rtld_fini=0, stack_end=0x7ffff8b0) at ../sysdeps/generic/libc-start.c:111 > > This is a static rpm binary, so I don't understand why it tries > do dynaload anything at all... > > Thanks in advance, > -- > Karel van Houten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Mar 22 01:40:16 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2M9eGa24881 for linux-mips-outgoing; Thu, 22 Mar 2001 01:40:16 -0800 Received: from exchange1.cam.pace.co.uk (host-131-80.pace.co.uk [136.170.131.80]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2M9eEM24878 for ; Thu, 22 Mar 2001 01:40:14 -0800 Received: by exchange1 with Internet Mail Service (5.5.2448.0) id ; Thu, 22 Mar 2001 09:39:12 -0000 Message-ID: <1402C4C025C4D311B50D00508B8B74E281B152@exchange1> From: Phil Thompson To: "'Geert Uytterhoeven'" Cc: linux-mips@oss.sgi.com Subject: RE: Recommended toolchain Date: Thu, 22 Mar 2001 09:39:11 -0000 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1603 Lines: 51 Correct - I am using the standard 2.4.2 sources. I had (obviously incorrectly) assumed that the standard sources would be up to date and not "some months" out of date. How are the differences in the two trees managed? At what point are the latest non-MIPS changes applied to the MIPS tree? At what point are the MIPS specific changes applied to the standard tree? Thanks, Phil -----Original Message----- From: Geert Uytterhoeven [mailto:Geert.Uytterhoeven@sonycom.com] Sent: 22 March 2001 07:50 To: Phil Thompson Cc: 'Erik Mullinix'; linux-mips@oss.sgi.com Subject: RE: Recommended toolchain On Wed, 21 Mar 2001, Phil Thompson wrote: > I had to patch va-mips.h to #include rather than > . > > The current errors are: > > - warnings about struct flock64 not being declared (it's defined in > asm-mips64/fcntl.h but not asm-mips/fcntl.h) > > - compilation stops because loops_per_sec is undeclared as far as > asm-mips/delay.h is concerned (although it seems fine in > asm-mips64/delay.h). > > This seems to imply that the mips architecture (as opposed to mips64) isn't > being maintained. Is this the case? Should I be using mips64 - but what > would be the point on an embedded CPU? You're definitely not using the Linux/MIPS CVS tree, since these things were fixed there some months ago. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Thu Mar 22 01:43:31 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2M9hVZ25157 for linux-mips-outgoing; Thu, 22 Mar 2001 01:43:31 -0800 Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2M9hSM25152 for ; Thu, 22 Mar 2001 01:43:29 -0800 Received: from escobaria.sonytel.be (escobaria.sonytel.be [10.34.80.3]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id KAA01858; Thu, 22 Mar 2001 10:43:05 +0100 (MET) Date: Thu, 22 Mar 2001 10:43:05 +0100 (MET) From: Geert Uytterhoeven To: Phil Thompson cc: linux-mips@oss.sgi.com Subject: RE: Recommended toolchain In-Reply-To: <1402C4C025C4D311B50D00508B8B74E281B152@exchange1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 787 Lines: 25 On Thu, 22 Mar 2001, Phil Thompson wrote: > Correct - I am using the standard 2.4.2 sources. I had (obviously > incorrectly) assumed that the standard sources would be up to date and not > "some months" out of date. :-) > How are the differences in the two trees managed? At what point are the > latest non-MIPS changes applied to the MIPS tree? At what point are the MIPS When Ralf finds some time? > specific changes applied to the standard tree? When Ralf finds some time and Linus is in a good mood? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Thu Mar 22 03:44:31 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MBiV827854 for linux-mips-outgoing; Thu, 22 Mar 2001 03:44:31 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MBiUM27851 for ; Thu, 22 Mar 2001 03:44:30 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id DAA10839 for ; Thu, 22 Mar 2001 03:44:30 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id DAA28589 for ; Thu, 22 Mar 2001 03:44:28 -0800 (PST) Message-ID: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: Subject: Embedded MIPS/Linux Needs Date: Thu, 22 Mar 2001 12:48:19 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1022 Lines: 28 Here at MIPS Technologies, we use Linux internally for design verification, experiments, benchmarking, etc., and as a consequence Carsten Langgaard and myself have both been active in this forum, and have tried to help the general Linux/MIPS community as best we can with the limited time that we can dedicate to the problem, in terms of suggested patches, bug fixes, cleanups, integration of needed components like the FPU emulator, etc. I have a question for those of you who are doing Linux work for *new* platforms (as opposed to the SGI/DEC legacy box support people). IF, and I emphasize the word *if*, MIPS Technologies were make a bigger investment in MIPS/Linux technology, be it kernel enhancements, cross/native tools, userland ports, libraries, or whatever, what would be your prioritized "wish list"? Feel free to respond by point-to-point email, though responses that are also copied to the mailing list might provoke some interesting and enlightening debate. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Thu Mar 22 04:29:08 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MCT8s29081 for linux-mips-outgoing; Thu, 22 Mar 2001 04:29:08 -0800 Received: from exchange1.cam.pace.co.uk (host-131-80.pace.co.uk [136.170.131.80]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MCT6M29078 for ; Thu, 22 Mar 2001 04:29:06 -0800 Received: by exchange1 with Internet Mail Service (5.5.2448.0) id ; Thu, 22 Mar 2001 12:27:59 -0000 Message-ID: <1402C4C025C4D311B50D00508B8B74E281B153@exchange1> From: Phil Thompson To: linux-mips@oss.sgi.com Subject: RE: Embedded MIPS/Linux Needs Date: Thu, 22 Mar 2001 12:27:59 -0000 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2448.0) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2272 Lines: 58 I'm just starting out on this path, so my priorities might be off... 1. Packaging of a "stable" cross-development kit, including kernel, toolchain and any other useful utilities. Saves me the time of assembling the pieces myself and saves me asking questions about problems that were fixed months ago. I know other companies provide this but I have yet to evaluate them. 2. Provision of a framework (which may already be in place - I haven't got that far yet) that provides me with a tick-list of hardware blocks that I may need to provide code for to support my particular board, and to be structured so that (as far as possible) I am adding files to the tree rather than modifying them. The framework to be arranged so that I can do it incrementally. 3. Support - not just for the development kit, but also as a source of experience and suggestions for porting to new boards. 4. Work with chip manufacturers who are slow to provide Linux drivers. Reference (rather than production quality) drivers would be better than nothing. This is obviously not a MIPS specific issue. Phil -----Original Message----- From: Kevin D. Kissell [mailto:kevink@mips.com] Sent: 22 March 2001 11:48 To: linux-mips@oss.sgi.com Subject: Embedded MIPS/Linux Needs Here at MIPS Technologies, we use Linux internally for design verification, experiments, benchmarking, etc., and as a consequence Carsten Langgaard and myself have both been active in this forum, and have tried to help the general Linux/MIPS community as best we can with the limited time that we can dedicate to the problem, in terms of suggested patches, bug fixes, cleanups, integration of needed components like the FPU emulator, etc. I have a question for those of you who are doing Linux work for *new* platforms (as opposed to the SGI/DEC legacy box support people). IF, and I emphasize the word *if*, MIPS Technologies were make a bigger investment in MIPS/Linux technology, be it kernel enhancements, cross/native tools, userland ports, libraries, or whatever, what would be your prioritized "wish list"? Feel free to respond by point-to-point email, though responses that are also copied to the mailing list might provoke some interesting and enlightening debate. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Thu Mar 22 05:23:23 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MDNNd30584 for linux-mips-outgoing; Thu, 22 Mar 2001 05:23:23 -0800 Received: from chmls20.mediaone.net (chmls20.mediaone.net [24.147.1.156]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MDNJM30581 for ; Thu, 22 Mar 2001 05:23:19 -0800 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.248.129]) by chmls20.mediaone.net (8.11.1/8.11.1) with SMTP id f2MDNAk23663; Thu, 22 Mar 2001 08:23:14 -0500 (EST) From: "Jay Carlson" To: , Subject: snow, a statically linked shared library MIPS ABI Date: Thu, 22 Mar 2001 08:23:13 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3921 Lines: 84 OK, I've been sitting on this for a while and I haven't been pushing hard on a release lately, so I think it's time for me to point you folks at the back-to-the-stone-age library system I've been working on. Warning: if you don't build distros from scratch, you won't find this interesting. If your devices-of-interest have big cache with wide, fast memory, you won't see >From the README: ---- This is snow, a collection of hacks to build absolute-linked shared libraries for mipsel-linux systems. It's inspired (if that's the word) by the way Linux built shared libraries back in the libc2-4 era. Motivation For various reasons, position-independent code produced by the GNU toolchain for MIPS targets is not very dense. On desktop systems, this is acceptable; on embedded systems, notably handheld Linux devices, it's a real problem. Unfortunately, PIC is an all-or-nothing proposition, given the current MIPS toolchain: all parts of a program, including the main executable, must be built as PIC for intercall to work. Therefore, in order to use non-PIC code anywhere, we need to rebuild shared libraries, startup code, and main programs. Without position-independent code, the ELF shared library strategy doesn't work. Plan Instead, we can build shared library images located at fixed locations in memory, with the location configured at library creation time. Stub libraries are generated that hold the absolute addresses of functions and data within the library image; programs (and other libraries) link with the stubs. [...] ---- Typical code density improvement is in the 20-40% range; file sizes are reduced slightly more. For example, bash 1.x went from 800k to 400k. Although I haven't benchmarked it, executable startup seems dramatically faster on the embedded devices I play with. There can be significant execution speed boosts too. It's been a while since I did time trials, but I think I remember that dhrystone and squeak are like 50-90% faster. These numbers are from the TX3912 and Vr4181; on a cobalt, dhrystone was only like 15% faster. And the nature of the code is important: the native Byte benchmark showed only minimal improvements. Source at ftp://ftp.place.org/pub/nop/linuxce/snow-1.0.1.tar.gz ; a toolchain builder is at ftp://ftp.place.org/pub/nop/linuxce/pyramid-builder-1.0.3.tar.gz . Shane Nay at Agenda Computing ( www.agendacomputing.com ) has done some extensive work on distro building based on snow. ftp://ftp.agendacomputing.com/pub/dev/ contains snapshots of the work he's been doing; it includes source for much of the Agenda VR3 distribution adapted to snow. Agenda released a test rom image that demonstrates that libc, X, fltk, bash, etc are functional (and fast!); for non-Agenda users, this is interesting because it proves snow is a viable distro base. The biggest item on the snow to-do list is the implementation of jump tables and fixed data positioning to allow forward binary compatibility of library versions. (As with the old a.out libraries, this compatibility will require work on the part of the library builder.) Jump tables themselves are easy to build; fixed data positioning seems easiest to implement with -fdata-sections from gcc 2.9x. Choice of library address ranges is an open problem. If all code lives below the 256M mark (as it does now) calls use direct addressing with jal and j. But that 256M gets sucked up real fast if it can only be allocated aligned on 256k boundaries (because of the ABI mmap requirements, right?) and we try to enforce global uniqueness of library space allocation. Allowing library code anywhere in the address space requires either per-callpoint 4-instruction "la $at,printf; jalr $at" or yet another layer of stubs linked into each client space. I'm looking for use/testing/contributions from embedded Linux people. If you'd like to take the code off my hands, that'd be cool too. Jay From owner-linux-mips@oss.sgi.com Thu Mar 22 06:01:46 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2ME1kB31733 for linux-mips-outgoing; Thu, 22 Mar 2001 06:01:46 -0800 Received: from chmls20.mediaone.net (chmls20.mediaone.net [24.147.1.156]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2ME1jM31730 for ; Thu, 22 Mar 2001 06:01:45 -0800 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.248.129]) by chmls20.mediaone.net (8.11.1/8.11.1) with SMTP id f2ME1hk24137; Thu, 22 Mar 2001 09:01:43 -0500 (EST) From: "Jay Carlson" To: "Kevin D. Kissell" , Subject: RE: Embedded MIPS/Linux Needs Date: Thu, 22 Mar 2001 09:01:47 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2258 Lines: 51 Disclaimer: I'm just a hobbyist. Kevin D. Kissell writes: > Here at MIPS Technologies, we use Linux internally > for design verification, experiments, benchmarking, > etc., and as a consequence Carsten Langgaard and > myself have both been active in this forum, and have > tried to help the general Linux/MIPS community as > best we can with the limited time that we can dedicate > to the problem, in terms of suggested patches, bug > fixes, cleanups, integration of needed components > like the FPU emulator, etc. Yes, and this is quite useful! > I have a question for those of you who are doing > Linux work for *new* platforms (as opposed to the > SGI/DEC legacy box support people). IF, and I > emphasize the word *if*, MIPS Technologies were > make a bigger investment in MIPS/Linux technology, > be it kernel enhancements, cross/native tools, > userland ports, libraries, or whatever, what would > be your prioritized "wish list"? Some of these things can reasonably be done by third parties. For instance, mvista's in the business of nailing down particular toolchain versions and doing relevant ports. These days I'm mostly userland, so I get to assume that working kernels are and will continue to be emitted from the smart people on this list too :-) My pet issue is code density and compiler quality. I think it's in MIPS's best interest to provide a really good compiler for their products, and I think gcc does a good job for traditional embedded MIPS systems. But the gcc/gas-generated code for the SVR4 ABI is pretty bad, especially for the low-end devices. snow (see previous message) shows how much room for improvement there is. Individual embedded Linux companies don't have much motivation to attack this problem alone, as it looks like it could involve extensive gcc hacking. If a particular customer looks like they have code density issues, it'd be easier for embedded linux companies to just recommend, say, ARM. MIPS Technologies on the other hand carries the banner for all devices licensing their architecture, and any toolchain work may result in greater demand for their own cores and licensee products. ARM and Cygnus recently contributed a gcc ARM backend rewrite. That's what got me thinking about this. Jay From owner-linux-mips@oss.sgi.com Thu Mar 22 06:17:36 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MEHaS32314 for linux-mips-outgoing; Thu, 22 Mar 2001 06:17:36 -0800 Received: from saturn.mikemac.com (saturn.mikemac.com [216.99.199.88]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MEHZM32311 for ; Thu, 22 Mar 2001 06:17:35 -0800 Received: from Saturn (localhost [127.0.0.1]) by saturn.mikemac.com (8.9.3/8.9.3) with ESMTP id GAA20495; Thu, 22 Mar 2001 06:17:28 -0800 Message-Id: <200103221417.GAA20495@saturn.mikemac.com> To: "Kevin D. Kissell" cc: linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs In-Reply-To: Your message of "Thu, 22 Mar 2001 12:48:19 +0100." <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> Date: Thu, 22 Mar 2001 06:17:28 -0800 From: Mike McDonald Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 617 Lines: 19 >From: "Kevin D. Kissell" >To: >Subject: Embedded MIPS/Linux Needs >Date: Thu, 22 Mar 2001 12:48:19 +0100 >I have a question for those of you who are doing >Linux work for *new* platforms (as opposed to the >SGI/DEC legacy box support people). IF, and I >emphasize the word *if*, MIPS Technologies were >make a bigger investment in MIPS/Linux technology, >be it kernel enhancements, cross/native tools, >userland ports, libraries, or whatever, what would >be your prioritized "wish list"? A bootloader that runs under WinCE 3.0! Mike McDonald mikemac@mikemac.com From owner-linux-mips@oss.sgi.com Thu Mar 22 06:18:10 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MEIAg32472 for linux-mips-outgoing; Thu, 22 Mar 2001 06:18:10 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MEIAM32469 for ; Thu, 22 Mar 2001 06:18:10 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id GAA11734; Thu, 22 Mar 2001 06:18:00 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id GAA02264; Thu, 22 Mar 2001 06:17:58 -0800 (PST) Message-ID: <013a01c0b2db$749249a0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jay Carlson" , , References: Subject: Re: snow, a statically linked shared library MIPS ABI Date: Thu, 22 Mar 2001 15:21:48 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 442 Lines: 12 > Instead, we can build shared library images located at fixed locations > in memory, with the location configured at library creation time. > Stub libraries are generated that hold the absolute addresses of > functions and data within the library image; programs (and other > libraries) link with the stubs. In fact, this is exactly how shared libraries worked under UNIX System V. It is inelegant, but economical. Kevin K. From owner-linux-mips@oss.sgi.com Thu Mar 22 07:28:42 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MFSgB02031 for linux-mips-outgoing; Thu, 22 Mar 2001 07:28:42 -0800 Received: from chmls20.mediaone.net (chmls20.mediaone.net [24.147.1.156]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MFSfM02027 for ; Thu, 22 Mar 2001 07:28:41 -0800 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.248.129]) by chmls20.mediaone.net (8.11.1/8.11.1) with SMTP id f2MFSbk14939; Thu, 22 Mar 2001 10:28:37 -0500 (EST) From: "Jay Carlson" To: "Kevin D. Kissell" , "Jay Carlson" , , Subject: RE: snow, a statically linked shared library MIPS ABI Date: Thu, 22 Mar 2001 10:28:41 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <013a01c0b2db$749249a0$0deca8c0@Ulysses> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 694 Lines: 17 Kevin D. Kissell [mailto:kevink@mips.com] writes: > > Instead, we can build shared library images located at fixed locations > > in memory, with the location configured at library creation time. > > Stub libraries are generated that hold the absolute addresses of > > functions and data within the library image; programs (and other > > libraries) link with the stubs. > > In fact, this is exactly how shared libraries worked under > UNIX System V. It is inelegant, but economical. Yeah. I bet there are precedents back in the mainframe world too. But my first encounter with it was Linux a.out libraries, so it's a sign that I'm truly a Linux Weenie that I think of it that way :-) Jay From owner-linux-mips@oss.sgi.com Thu Mar 22 09:55:50 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MHtoc05245 for linux-mips-outgoing; Thu, 22 Mar 2001 09:55:50 -0800 Received: from ns.snowman.net (ns.snowman.net [63.80.4.34]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MHtoM05242 for ; Thu, 22 Mar 2001 09:55:50 -0800 Received: from localhost (nick@localhost) by ns.snowman.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id MAA19642 for ; Thu, 22 Mar 2001 12:55:45 -0500 Date: Thu, 22 Mar 2001 12:55:45 -0500 (EST) From: X-Sender: nick@ns cc: linux-mips@oss.sgi.com Subject: Information about non-cache-coherent r10k In-Reply-To: <1402C4C025C4D311B50D00508B8B74E281B152@exchange1> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 156 Lines: 6 http://mail-index.netbsd.org/port-sgimips/2000/06/29/0006.html I was forwarded this link by a very helpfull fellow working on the Netbsd mips port. Nick From owner-linux-mips@oss.sgi.com Thu Mar 22 10:21:58 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MILwd05906 for linux-mips-outgoing; Thu, 22 Mar 2001 10:21:58 -0800 Received: from jester.ti.com (jester.ti.com [192.94.94.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MILvM05903 for ; Thu, 22 Mar 2001 10:21:57 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by jester.ti.com (8.11.1/8.11.1) with ESMTP id f2MILpD17605; Thu, 22 Mar 2001 12:21:51 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA00109; Thu, 22 Mar 2001 12:21:51 -0600 (CST) Received: from dlep4.itg.ti.com (dlep4-maint.itg.ti.com [157.170.133.17]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA00099; Thu, 22 Mar 2001 12:21:50 -0600 (CST) Received: from ti.com (reddwarf.sc.ti.com [158.218.100.143]) by dlep4.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA07794; Thu, 22 Mar 2001 12:21:50 -0600 (CST) Message-ID: <3ABA430E.BDC095E@ti.com> Date: Thu, 22 Mar 2001 11:23:10 -0700 From: Jeff Harrell X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs References: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> Content-Type: multipart/mixed; boundary="------------067786785BCB493D506E86D4" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 6549 Lines: 178 This is a multi-part message in MIME format. --------------067786785BCB493D506E86D4 Content-Type: multipart/alternative; boundary="------------9A7CE958C2C774B590AC4627" --------------9A7CE958C2C774B590AC4627 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit "Kevin D. Kissell" wrote: > Here at MIPS Technologies, we use Linux internally > for design verification, experiments, benchmarking, > etc., and as a consequence Carsten Langgaard and > myself have both been active in this forum, and have > tried to help the general Linux/MIPS community as > best we can with the limited time that we can dedicate > to the problem, in terms of suggested patches, bug > fixes, cleanups, integration of needed components > like the FPU emulator, etc. > I think that one of the larger hurdles that we have had to overcome is a common set of tools that can build a current kernel and userland application set from a cross-developed environment. There seems to have been a divergence between kernel tools and userland tools specifically in the area of recent kernel 2.4.x and GLIBC 2.2.x that is a major headache for delivering a toolchain that is on par with the intel equivalent designs. It is tough to offer a linux design that requires multiple toolchains one to build the kernel, one to build userland apps. > > I have a question for those of you who are doing > Linux work for *new* platforms (as opposed to the > SGI/DEC legacy box support people). IF, and I > emphasize the word *if*, MIPS Technologies were > make a bigger investment in MIPS/Linux technology, > be it kernel enhancements, cross/native tools, > userland ports, libraries, or whatever, what would > be your prioritized "wish list"? > 1. A toolchain that will build 2.4.x version of the kernel as well as GLIBC 2.2 dependent applications. Preferrably this would be a cross-development environment. (This would require GLIBC 2.2 accessable as a cross-compiled environment 2. Userland app ports > > Feel free to respond by point-to-point email, though > responses that are also copied to the mailing list > might provoke some interesting and enlightening > debate. > > Regards, > > Kevin K. >From past experience it's easy to see that without a solid set of development tools, it is hard to justify using a particular CPU or hardware. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Jeff Harrell Work: (801) 619-6104 Broadband Access group/TI jharrell@ti.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --------------9A7CE958C2C774B590AC4627 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit "Kevin D. Kissell" wrote:
Here at MIPS Technologies, we use Linux internally
for design verification, experiments, benchmarking,
etc., and as a consequence Carsten Langgaard and
myself have both been active in this forum, and have
tried to help the general Linux/MIPS community as
best we can with the limited time that we can dedicate
to the problem, in terms of suggested patches, bug
fixes, cleanups, integration of needed components
like the FPU emulator, etc.
 
I think that  one of the larger hurdles that we have had
to overcome is a common set of tools that can build a current
kernel and userland application set from a cross-developed
environment.  There seems to have been a
divergence between kernel tools and userland tools specifically in
the area of recent kernel 2.4.x and GLIBC 2.2.x that is a major
headache for delivering a toolchain that is on par with the
intel equivalent designs.  It is tough to offer a linux design that
requires multiple toolchains one to build the kernel, one to build
userland apps.
 
 
I have a question for those of you who are doing
Linux work for *new* platforms (as opposed to the
SGI/DEC legacy box support people).  IF, and I
emphasize the word *if*, MIPS Technologies were
make a bigger investment in MIPS/Linux technology,
be it kernel enhancements, cross/native tools,
userland ports, libraries, or whatever, what would
be your prioritized "wish list"?
 
    1. A toolchain that will build 2.4.x version of the kernel as well
        as GLIBC 2.2 dependent applications.  Preferrably this would
        be a cross-development environment.  (This would require
         GLIBC 2.2 accessable as a cross-compiled environment

    2.  Userland app ports
 

 
Feel free to respond by point-to-point email, though
responses that are also copied to the mailing list
might provoke some interesting and enlightening
debate.

            Regards,

            Kevin K.


From past experience it's easy to see that without a
solid set of development tools, it is hard to justify using
a particular CPU or hardware.
 
 

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Harrell                    Work:  (801) 619-6104 
Broadband Access group/TI       
jharrell@ti.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  --------------9A7CE958C2C774B590AC4627-- --------------067786785BCB493D506E86D4 Content-Type: text/x-vcard; charset=us-ascii; name="jharrell.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jeff Harrell Content-Disposition: attachment; filename="jharrell.vcf" begin:vcard n:Harrell;Jeff tel;cell:(801) 597-6268 tel;fax:(801) 619-6150 tel;work:(801) 619-6104 x-mozilla-html:TRUE url:http://www.ti.com org:Broadband Access Group version:2.1 email;internet:jharrell@ti.com title:Texas Instruments adr;quoted-printable:;;170 West Election Rd. Suite 100 =0D=0AMS 4106 ;Draper;Utah;84020-6410;USA x-mozilla-cpt:;0 fn:Jeff Harrell end:vcard --------------067786785BCB493D506E86D4-- From owner-linux-mips@oss.sgi.com Thu Mar 22 10:36:34 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MIaYK06491 for linux-mips-outgoing; Thu, 22 Mar 2001 10:36:34 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MIaXM06488 for ; Thu, 22 Mar 2001 10:36:33 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2MIX4020006; Thu, 22 Mar 2001 10:33:04 -0800 Message-ID: <3ABA4539.C3E780B6@mvista.com> Date: Thu, 22 Mar 2001 10:32:25 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: Jay Carlson CC: "Kevin D. Kissell" , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1517 Lines: 35 Jay Carlson wrote: > > Disclaimer: I'm just a hobbyist. > Disclaimer: I am an MontaVista employee, but as always, this email only represents my own opinion. :-) > Kevin D. Kissell writes: > > > Individual embedded Linux companies don't have much motivation to attack > this problem alone, as it looks like it could involve extensive gcc hacking. > If a particular customer looks like they have code density issues, it'd be > easier for embedded linux companies to just recommend, say, ARM. MIPS > Technologies on the other hand carries the banner for all devices licensing > their architecture, and any toolchain work may result in greater demand for > their own cores and licensee products. > I agree. Toolchain is the first step in the food chain. It makes most sense for MTI to invest in it and to make it better. All companies that I heard of switching from MIPS to PPC are due to toolchain (including debuggers). Sometimes it even has nothing to do with Linux. I think kernel also needs improvement in terms of board/machine support. I wrote an email long time ago talking about introducing a board support structure. I predicted we would see 20 new MIPS boards added this year and 100 more down the road. Apparently a better structure needs to be in place to accomdate the growth. It will certainly make future porting much easier too. While some of the improvement can be done incrementally (like time.c mess clean-up), some (like irq, PCI?) is probably best to be done just in one shot. Jun From owner-linux-mips@oss.sgi.com Thu Mar 22 11:00:30 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MJ0U407232 for linux-mips-outgoing; Thu, 22 Mar 2001 11:00:30 -0800 Received: from pobox.sibyte.com (pobox.sibyte.com [208.12.96.20]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MJ0TM07229 for ; Thu, 22 Mar 2001 11:00:29 -0800 Received: from postal.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id 53DF8205FF for ; Thu, 22 Mar 2001 11:00:24 -0800 (PST) Received: from SMTP agent by mail gateway Thu, 22 Mar 2001 10:53:21 -0800 Received: from plugh.sibyte.com (plugh.sibyte.com [10.21.64.158]) by postal.sibyte.com (Postfix) with ESMTP id 5481B1595F for ; Thu, 22 Mar 2001 11:00:24 -0800 (PST) Received: by plugh.sibyte.com (Postfix, from userid 61017) id 65F1F686D; Thu, 22 Mar 2001 11:02:52 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs Date: Thu, 22 Mar 2001 11:02:20 -0800 X-Mailer: KMail [version 1.0.29] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <01032211025209.20180@plugh.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 595 Lines: 18 On Thu, 22 Mar 2001, you wrote: > I have a question for those of you who are doing > Linux work for *new* platforms (as opposed to the > SGI/DEC legacy box support people). IF, and I > emphasize the word *if*, MIPS Technologies were > make a bigger investment in MIPS/Linux technology, > be it kernel enhancements, cross/native tools, > userland ports, libraries, or whatever, what would > be your prioritized "wish list"? 1) n64 support in the full current gnu toolchain 2) n64 support in the full current gnu toolchain. 3) n64... I, of course, hold no biases whatsoever. ;) -Justin From owner-linux-mips@oss.sgi.com Thu Mar 22 11:03:50 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MJ3oI07492 for linux-mips-outgoing; Thu, 22 Mar 2001 11:03:50 -0800 Received: from ns.snowman.net (ns.snowman.net [63.80.4.34]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MJ3nM07489 for ; Thu, 22 Mar 2001 11:03:49 -0800 Received: from localhost (nick@localhost) by ns.snowman.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id OAA21425; Thu, 22 Mar 2001 14:03:43 -0500 Date: Thu, 22 Mar 2001 14:03:43 -0500 (EST) From: X-Sender: nick@ns To: Justin Carlson cc: linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs In-Reply-To: <01032211025209.20180@plugh.sibyte.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 887 Lines: 33 I'd like to modify a couple of those requests... 1) Working 64bit support in the current gnu toolchain . . . Nick (It sorta produces useable code... usually..... on tuesdays... if it's a blue moon) On Thu, 22 Mar 2001, Justin Carlson wrote: > On Thu, 22 Mar 2001, you wrote: > > > I have a question for those of you who are doing > > Linux work for *new* platforms (as opposed to the > > SGI/DEC legacy box support people). IF, and I > > emphasize the word *if*, MIPS Technologies were > > make a bigger investment in MIPS/Linux technology, > > be it kernel enhancements, cross/native tools, > > userland ports, libraries, or whatever, what would > > be your prioritized "wish list"? > > 1) n64 support in the full current gnu toolchain > 2) n64 support in the full current gnu toolchain. > 3) n64... > > I, of course, hold no biases whatsoever. ;) > > -Justin > From owner-linux-mips@oss.sgi.com Thu Mar 22 11:22:05 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MJM5U08105 for linux-mips-outgoing; Thu, 22 Mar 2001 11:22:05 -0800 Received: from mail.foobazco.org (snowman.foobazco.org [198.144.194.230]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MJM4M08102 for ; Thu, 22 Mar 2001 11:22:05 -0800 Received: by mail.foobazco.org (Postfix, from userid 1014) id 178F8109CE; Thu, 22 Mar 2001 11:22:29 -0800 (PST) Date: Thu, 22 Mar 2001 11:22:29 -0800 From: Keith M Wesolowski To: nick@snowman.net Cc: Justin Carlson , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs Message-ID: <20010322112229.A5617@foobazco.org> References: <01032211025209.20180@plugh.sibyte.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from nick@snowman.net on Thu, Mar 22, 2001 at 02:03:43PM -0500 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 901 Lines: 27 On Thu, Mar 22, 2001 at 02:03:43PM -0500, nick@snowman.net wrote: > (It sorta produces useable code... usually..... on tuesdays... if it's a > blue moon) gcc 3.0 for mips64 requires hacks to even accept the arguments the kernel compile wants to give, and even then it reliably produces extremely incorrect code. For example: int i = 0; prom_printf ("%d", i); Might yield something like -14777223 - basically, anything but 0. The code that causes this is horribly wrong that it wasn't even worth looking at. There are all sorts of similar, related, and dissimilar problems. On the other hand, the same compiler for mips (not 64) reliably produces working 2.4 kernels... -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Thu Mar 22 15:44:03 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2MNi3e14366 for linux-mips-outgoing; Thu, 22 Mar 2001 15:44:03 -0800 Received: from gatekeep.ti.com (gatekeep.ti.com [192.94.94.61]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2MNi1M14358 for ; Thu, 22 Mar 2001 15:44:02 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by gatekeep.ti.com (8.11.1/8.11.1) with ESMTP id f2MNhtr17992 for ; Thu, 22 Mar 2001 17:43:56 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA25822 for ; Thu, 22 Mar 2001 17:43:55 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA25816 for ; Thu, 22 Mar 2001 17:43:55 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.126]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA12164 for ; Thu, 22 Mar 2001 17:43:54 -0600 (CST) Message-ID: <3ABA8F3D.E24DF122@ti.com> Date: Thu, 22 Mar 2001 16:48:13 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: Tools miss-compile old kernel Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 3365 Lines: 72 I recently upgraded to a newer Cross-compiler tool chain to try to get up to glibc2.2. I'm now at gcc-2.95.3-14 and binutils-2.10.91-2 (both from Maciej's site). I have built 2.4.0-test9 with this tool-chain, but is will not boot. It spews illegal instruction errors when init is launched. Is this supposed to work, or are the new tools incompatible with older kernels? I dumped out the disassembly of a newly compiled kernel and found some bad instructions in many of the routines. First one is from head.S SNIP>> of bad disassembly 0000000080100280 : except_vec0_r4000(): 80100280: 401a4000 mfc0 $k0,$8 80100284: 001ad582 srl $k0,$k0,0x16 80100288: 3c1b0000 lui $k1,0x0 8010028c: 677b0001 0x677b0001 80100290: 001bdc38 0x1bdc38 80100294: 677b8023 0x677b8023 80100298: 001bdc38 0x1bdc38 8010029c: 8f7bb250 lw $k1,-19888($k1) 801002a0: 001ad080 sll $k0,$k0,0x2 801002a4: 037ad821 addu $k1,$k1,$k0 801002a8: 401a2000 mfc0 $k0,$4 801002ac: 8f7b0000 lw $k1,0($k1) 801002b0: 001ad042 srl $k0,$k0,0x1 801002b4: 335a0ff8 andi $k0,$k0,0xff8 801002b8: 037ad821 addu $k1,$k1,$k0 801002bc: 8f7a0000 lw $k0,0($k1) 801002c0: 8f7b0004 lw $k1,4($k1) 801002c4: 001ad182 srl $k0,$k0,0x6 801002c8: 409a1000 mtc0 $k0,$2 801002cc: 001bd982 srl $k1,$k1,0x6 801002d0: 409b1800 mtc0 $k1,$3 801002d4: 10000001 b ffffffff801002dc 801002d8: 42000006 tlbwr 801002dc: 00000000 nop 801002e0: 42000018 c0 0x18 <>SNIP of good assembly from old tools 0000000080100280 : except_vec0_r4000(): 80100280: 401a4000 mfc0 $k0,$8 80100284: 001ad582 srl $k0,$k0,0x16 80100288: 3c1b8023 lui $k1,0x8023 8010028c: 8f7bd210 lw $k1,-11760($k1) 80100290: 001ad080 sll $k0,$k0,0x2 80100294: 037ad821 addu $k1,$k1,$k0 80100298: 401a2000 mfc0 $k0,$4 8010029c: 8f7b0000 lw $k1,0($k1) 801002a0: 001ad042 srl $k0,$k0,0x1 801002a4: 335a0ff8 andi $k0,$k0,0xff8 801002a8: 037ad821 addu $k1,$k1,$k0 801002ac: 8f7a0000 lw $k0,0($k1) 801002b0: 8f7b0004 lw $k1,4($k1) 801002b4: 001ad182 srl $k0,$k0,0x6 801002b8: 409a1000 mtc0 $k0,$2 801002bc: 001bd982 srl $k1,$k1,0x6 801002c0: 409b1800 mtc0 $k1,$3 801002c4: 10000001 b 801002cc 801002c8: 42000006 tlbwr 801002cc: 00000000 nop 801002d0: 42000018 eret <; Thu, 22 Mar 2001 16:46:35 -0800 Received: by mail.foobazco.org (Postfix, from userid 1014) id B3068109CE; Thu, 22 Mar 2001 16:47:00 -0800 (PST) Date: Thu, 22 Mar 2001 16:47:00 -0800 From: Keith M Wesolowski To: Brady Brown Cc: SGI news group Subject: Re: Tools miss-compile old kernel Message-ID: <20010322164659.A6068@foobazco.org> References: <3ABA8F3D.E24DF122@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3ABA8F3D.E24DF122@ti.com>; from bbrown@ti.com on Thu, Mar 22, 2001 at 04:48:13PM -0700 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 984 Lines: 22 On Thu, Mar 22, 2001 at 04:48:13PM -0700, Brady Brown wrote: > Is this supposed to work, or are the new tools incompatible with > older kernels? That particular assembler is incompatible with sanity, older kernels, newer kernels, and anything you expect to actually function properly. > Looks like here the tools blow the lui/lw combination and also the eret. Any > suggestions? Upgrade to CVS binutils. The one Maciej has on his site is apparently broken. If you want a toolchain that is known to work at least in some cases, you can pull it from ftp://oss.sgi.com/pub/linux/mips/mips-linux/simple/crossdev/. That is the toolchain I use to build kernels -and- userland (yes, I know, everyone says it can't be done, but...) and thus it Works For Me (TM). -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Fri Mar 23 14:54:01 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2NMs1X11861 for linux-mips-outgoing; Fri, 23 Mar 2001 14:54:01 -0800 Received: from sprint02.rtmx.net (IDENT:qmailr@sprint02.RTMX.NET [208.31.160.2]) by oss.sgi.com (8.11.3/8.11.3) with SMTP id f2NMs1M11858 for ; Fri, 23 Mar 2001 14:54:01 -0800 Received: (qmail 12007 invoked by uid 102); 23 Mar 2001 22:53:59 -0000 Received: from host098.momenco.com (HELO beagle) (64.169.228.98) by 208.31.160.29 with SMTP; 23 Mar 2001 22:53:59 -0000 From: "Matthew Dharm" To: "Linux-MIPS" Subject: Multiple processor support? Date: Fri, 23 Mar 2001 14:53:59 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 355 Lines: 10 Does the MIPS port of linux support multiple-processor architectures? Matt Dharm -- Matthew D. Dharm Senior Software Designer Momentum Computer Inc. 1815 Aston Ave. Suite 107 (760) 431-8663 X-115 Carlsbad, CA 92008-7310 Momentum Works For You www.momenco.com From owner-linux-mips@oss.sgi.com Fri Mar 23 14:56:05 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2NMu5512107 for linux-mips-outgoing; Fri, 23 Mar 2001 14:56:05 -0800 Received: from pobox.sibyte.com (pobox.sibyte.com [208.12.96.20]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2NMu4M12104 for ; Fri, 23 Mar 2001 14:56:04 -0800 Received: from postal.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id 52EAB205FC; Fri, 23 Mar 2001 14:55:59 -0800 (PST) Received: from SMTP agent by mail gateway Fri, 23 Mar 2001 14:48:54 -0800 Received: from plugh.sibyte.com (plugh.sibyte.com [10.21.64.158]) by postal.sibyte.com (Postfix) with ESMTP id 530B21595F; Fri, 23 Mar 2001 14:55:59 -0800 (PST) Received: by plugh.sibyte.com (Postfix, from userid 61017) id B19D6686D; Fri, 23 Mar 2001 14:58:35 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: "Matthew Dharm" Subject: Re: Multiple processor support? Date: Fri, 23 Mar 2001 14:58:20 -0800 X-Mailer: KMail [version 1.0.29] Content-Type: text/plain References: In-Reply-To: Cc: linux-mips@oss.sgi.com MIME-Version: 1.0 Message-Id: <01032314583505.00779@plugh.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 133 Lines: 7 On Fri, 23 Mar 2001, you wrote: > Does the MIPS port of linux support multiple-processor architectures? > MIPS or MIPS64? -Justin From owner-linux-mips@oss.sgi.com Fri Mar 23 16:01:28 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2O01Su13428 for linux-mips-outgoing; Fri, 23 Mar 2001 16:01:28 -0800 Received: from sprint02.rtmx.net (IDENT:qmailr@sprint02.RTMX.NET [208.31.160.2]) by oss.sgi.com (8.11.3/8.11.3) with SMTP id f2O01RM13425 for ; Fri, 23 Mar 2001 16:01:27 -0800 Received: (qmail 19379 invoked by uid 102); 24 Mar 2001 00:01:26 -0000 Received: from host098.momenco.com (HELO beagle) (64.169.228.98) by 208.31.160.29 with SMTP; 24 Mar 2001 00:01:26 -0000 From: "Matthew Dharm" To: Cc: Subject: RE: Multiple processor support? Date: Fri, 23 Mar 2001 16:01:26 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-reply-to: <01032314583505.00779@plugh.sibyte.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 775 Lines: 30 Well, I'd like to know about both, frankly. Tho I'm more interested in whichever is designed to run on RM7000 series processors. Matt -- Matthew D. Dharm Senior Software Designer Momentum Computer Inc. 1815 Aston Ave. Suite 107 (760) 431-8663 X-115 Carlsbad, CA 92008-7310 Momentum Works For You www.momenco.com > -----Original Message----- > From: Justin Carlson [mailto:carlson@sibyte.com] > Sent: Friday, March 23, 2001 2:58 PM > To: Matthew Dharm > Cc: linux-mips@oss.sgi.com > Subject: Re: Multiple processor support? > > > On Fri, 23 Mar 2001, you wrote: > > Does the MIPS port of linux support multiple-processor > architectures? > > > > MIPS or MIPS64? > > -Justin > > From owner-linux-mips@oss.sgi.com Fri Mar 23 16:12:01 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2O0C1g13770 for linux-mips-outgoing; Fri, 23 Mar 2001 16:12:01 -0800 Received: from pobox.sibyte.com (pobox.sibyte.com [208.12.96.20]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2O0C1M13767 for ; Fri, 23 Mar 2001 16:12:01 -0800 Received: from postal.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id 6AC51205FA; Fri, 23 Mar 2001 16:11:55 -0800 (PST) Received: from SMTP agent by mail gateway Fri, 23 Mar 2001 16:04:51 -0800 Received: from plugh.sibyte.com (plugh.sibyte.com [10.21.64.158]) by postal.sibyte.com (Postfix) with ESMTP id CD31315961; Fri, 23 Mar 2001 16:11:55 -0800 (PST) Received: by plugh.sibyte.com (Postfix, from userid 61017) id 7D288686D; Fri, 23 Mar 2001 16:14:36 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: "Matthew Dharm" Subject: RE: Multiple processor support? Date: Fri, 23 Mar 2001 16:08:13 -0800 X-Mailer: KMail [version 1.0.29] Content-Type: text/plain Cc: References: In-Reply-To: MIME-Version: 1.0 Message-Id: <01032316143609.00779@plugh.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 717 Lines: 14 On Fri, 23 Mar 2001, Matthew Dharm wrote: > Well, I'd like to know about both, frankly. Tho I'm more interested > in whichever is designed to run on RM7000 series processors. To the best of my knowledge, the mips64 tree only works in SMP on the ip-27 which is r10K based. There would be a bit of work to get an RM7K based multiprocessor system to run. A fair amount of the "generic" code in that tree is also pretty ip-27 specific, and so would need to be cleaned up. I'm working on mips32 SMP support at the moment; there are no existing ports of this tree to an SMP platform. The mips64 stuff is certainly much, much more mature. I don't know of any reasons not to use the mips64 side for an RM7K. -Justin From owner-linux-mips@oss.sgi.com Fri Mar 23 16:16:12 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2O0GCq14047 for linux-mips-outgoing; Fri, 23 Mar 2001 16:16:12 -0800 Received: from clrsrv1.clearcore.com (@www.clearcore.com [208.141.182.168]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2O0GBM14044 for ; Fri, 23 Mar 2001 16:16:11 -0800 Received: from clearcore.net (nephi.clearcore.com [192.168.3.3]) by clrsrv1.clearcore.com (8.10.1/8.10.1) with ESMTP id f2O0Fjd26311; Fri, 23 Mar 2001 17:15:45 -0700 Message-ID: <3ABBE6BC.1040005@clearcore.net> Date: Fri, 23 Mar 2001 17:13:48 -0700 From: Joe George Organization: ClearCore User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.17-21mdk i686; en-US; 0.8.1) Gecko/20010321 X-Accept-Language: en MIME-Version: 1.0 To: Matthew Dharm CC: carlson@sibyte.com, linux-mips@oss.sgi.com Subject: Re: Multiple processor support? References: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 935 Lines: 40 Unfortunately the RM7000 does not have hardware cache coherency support. Joe George Matthew Dharm wrote: > Well, I'd like to know about both, frankly. Tho I'm more interested > in whichever is designed to run on RM7000 series processors. > > Matt > > -- > Matthew D. Dharm Senior Software Designer > Momentum Computer Inc. 1815 Aston Ave. Suite 107 > (760) 431-8663 X-115 Carlsbad, CA 92008-7310 > Momentum Works For You www.momenco.com > > >> -----Original Message----- >> From: Justin Carlson [mailto:carlson@sibyte.com] >> Sent: Friday, March 23, 2001 2:58 PM >> To: Matthew Dharm >> Cc: linux-mips@oss.sgi.com >> Subject: Re: Multiple processor support? >> >> >> On Fri, 23 Mar 2001, you wrote: >> >>> Does the MIPS port of linux support multiple-processor >> >> architectures? >> >> MIPS or MIPS64? >> >> -Justin >> >> From owner-linux-mips@oss.sgi.com Fri Mar 23 16:28:41 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2O0SfQ14514 for linux-mips-outgoing; Fri, 23 Mar 2001 16:28:41 -0800 Received: from mail.foobazco.org (snowman.foobazco.org [198.144.194.230]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2O0SfM14510 for ; Fri, 23 Mar 2001 16:28:41 -0800 Received: by mail.foobazco.org (Postfix, from userid 1014) id 9C77E109CE; Fri, 23 Mar 2001 16:29:05 -0800 (PST) Date: Fri, 23 Mar 2001 16:29:05 -0800 From: Keith M Wesolowski To: Justin Carlson Cc: Matthew Dharm , linux-mips@oss.sgi.com Subject: Re: Multiple processor support? Message-ID: <20010323162904.A10387@foobazco.org> References: <01032316143609.00779@plugh.sibyte.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <01032316143609.00779@plugh.sibyte.com>; from carlson@sibyte.com on Fri, Mar 23, 2001 at 04:08:13PM -0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 905 Lines: 17 On Fri, Mar 23, 2001 at 04:08:13PM -0800, Justin Carlson wrote: > To the best of my knowledge, the mips64 tree only works in SMP on the ip-27 > which is r10K based. There would be a bit of work to get an RM7K based > multiprocessor system to run. A fair amount of the "generic" code in > that tree is also pretty ip-27 specific, and so would need to be cleaned up. In the particular case of SMP, this is probably still true. However, as of last weekend this tree compiles properly and boots part way on Indy; I have more to do but the separation of the obviously ip27-dependent stuff is done; you should at least be able to compile other machines in mips64...if there were any. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Fri Mar 23 16:37:01 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2O0b1214828 for linux-mips-outgoing; Fri, 23 Mar 2001 16:37:01 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2O0b0M14825 for ; Fri, 23 Mar 2001 16:37:00 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id QAA29948; Fri, 23 Mar 2001 16:37:01 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id QAA29978; Fri, 23 Mar 2001 16:36:57 -0800 (PST) Message-ID: <01b801c0b3fb$1770b740$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: , "Matthew Dharm" Cc: References: <01032316143609.00779@plugh.sibyte.com> Subject: Re: Multiple processor support? Date: Sat, 24 Mar 2001 01:40:47 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1517 Lines: 37 > > Well, I'd like to know about both, frankly. Tho I'm more interested > > in whichever is designed to run on RM7000 series processors. None are "designed" as such for the RM7000. I don't have a full RM7000 manual in the shop, but the short-form advance manual that I do have, while it goes into a fair amount of detail about the cache operations and external interface protocols, makes no mention of any support for hardware coherence of the sort provided by the R10000/R12000 (and the R4000/R4400 for that matter). If there is no support for cached/coherent memory attributes and cache interventions from the system side, an SMP kernel design for an MP SGI box might not be useful for an MP RM7K configuration. It is possible, but tricky, and at times unavoidably inefficient to build a software-coherent SMP system. I have not heard of anyone doing so with MIPS/Linux. > To the best of my knowledge, the mips64 tree only works in SMP on the ip-27 > which is r10K based. There would be a bit of work to get an RM7K based > multiprocessor system to run. A fair amount of the "generic" code in > that tree is also pretty ip-27 specific, and so would need to be cleaned up. > > I'm working on mips32 SMP support at the moment; there are no existing ports of > this tree to an SMP platform. The mips64 stuff is certainly much, much more > mature. I don't know of any reasons not to use the mips64 side for an RM7K. Well, one reason might be memory footprint... Regards, Kevin K. From owner-linux-mips@oss.sgi.com Fri Mar 23 17:24:23 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2O1ONL15856 for linux-mips-outgoing; Fri, 23 Mar 2001 17:24:23 -0800 Received: from dea.waldorf-gmbh.de (u-77-21.karlsruhe.ipdial.viaginterkom.de [62.180.21.77]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2O1OKM15850 for ; Fri, 23 Mar 2001 17:24:20 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2O1N7515101; Sat, 24 Mar 2001 02:23:07 +0100 Date: Sat, 24 Mar 2001 02:23:07 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: , "Matthew Dharm" , Subject: Re: Multiple processor support? Message-ID: <20010324022307.B15044@bacchus.dhis.org> References: <01032316143609.00779@plugh.sibyte.com> <01b801c0b3fb$1770b740$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <01b801c0b3fb$1770b740$0deca8c0@Ulysses>; from kevink@mips.com on Sat, Mar 24, 2001 at 01:40:47AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 351 Lines: 10 On Sat, Mar 24, 2001 at 01:40:47AM +0100, Kevin D. Kissell wrote: > Well, one reason might be memory footprint... As of now the memory footprint of the kernel is large but userspace which is all 32-bit software has unchanged footprint. I've got plans for 2.5 to reduce the memory footprint of the kernel by introducing a 2-level pagetable. Ralf From owner-linux-mips@oss.sgi.com Sat Mar 24 13:18:06 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2OLI6o02735 for linux-mips-outgoing; Sat, 24 Mar 2001 13:18:06 -0800 Received: from air.lug-owl.de (air.lug-owl.de [62.52.24.190]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2OLI5M02732 for ; Sat, 24 Mar 2001 13:18:05 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 67DFF7C63; Sat, 24 Mar 2001 22:17:59 +0100 (CET) Date: Sat, 24 Mar 2001 22:17:58 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: elf2ecoff problem Message-ID: <20010324221757.B9810@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="dc+cDN39EJAMEtIO" Content-Disposition: inline User-Agent: Mutt/1.3.15i X-Operating-System: Linux air 2.4.2 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 4043 Lines: 113 --dc+cDN39EJAMEtIO Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi! I'm trying to get a bootable kernel from fridays CVS sources for a R3k DECstation. The elf kernel compiles fine, but elf2ecoff fails: make[1]: Entering directory `/home/jbglaw/kernel_src/work/mips_linux/linux/= arch/mips/boot' gcc -o elf2ecoff elf2ecoff.c =2E/elf2ecoff /home/jbglaw/kernel_src/work/mips_linux/linux/vmlinux vmlinux= .ecoff -a Non-contiguous data can't be converted. make[1]: *** [vmlinux.ecoff] Error 1 make[1]: Leaving directory `/home/jbglaw/kernel_src/work/mips_linux/linux/a= rch/mips/boot' make: *** [boot] Error 2 Any hints? I'm using binutils and gcc from simple/crossdev, but that doesn't seem to be the problem here... jbglaw@schaufenster:~/kernel_src/work/mips_linux/linux$ mipsel-linux-objdum= p -h vmlinux vmlinux: file format elf32-littlemips Sections: Idx Name Size VMA LMA File off A= lgn 0 .text 00144590 ffffffff80040000 ffffffff80040000 00001000 2= **13 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .fixup 000010f0 ffffffff80184590 ffffffff80184590 00145590 2= **0 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .kstrtab 000031d4 ffffffff80185680 ffffffff80185680 00146680 2= **2 CONTENTS, ALLOC, LOAD, READONLY, DATA 3 __ex_table 00001fc0 ffffffff80188860 ffffffff80188860 00149860 2= **2 CONTENTS, ALLOC, LOAD, READONLY, DATA 4 __dbe_table 00000000 ffffffff8018a820 ffffffff8018a820 0014b820 2= **0 CONTENTS, ALLOC, LOAD, READONLY, DATA 5 __ksymtab 00001888 ffffffff8018a820 ffffffff8018a820 0014b820 2= **2 CONTENTS, ALLOC, LOAD, READONLY, DATA 6 .text.init 0000dd78 ffffffff8018e000 ffffffff8018e000 0014e000 2= **2 CONTENTS, ALLOC, LOAD, READONLY, CODE 7 .data.init 0000049c ffffffff8019bd78 ffffffff8019bd78 0015bd78 2= **2 CONTENTS, ALLOC, LOAD, DATA 8 .setup.init 00000088 ffffffff8019c220 ffffffff8019c220 0015c220 2= **2 CONTENTS, ALLOC, LOAD, DATA 9 .initcall.init 00000058 ffffffff8019c2a8 ffffffff8019c2a8 0015c2a8 = 2**2 CONTENTS, ALLOC, LOAD, DATA 10 .data.cacheline_aligned 00000200 ffffffff8019d000 ffffffff8019d000 0= 015d000 2**4 CONTENTS, ALLOC, LOAD, DATA 11 .reginfo 00000018 ffffffff8019d200 ffffffff8019d200 0015d200 2= **2 CONTENTS, ALLOC, LOAD, READONLY, DATA, LINK_ONCE_SAME_SIZE 12 .data 00012890 ffffffff8019d220 ffffffff8019d220 0015d220 2= **4 CONTENTS, ALLOC, LOAD, DATA 13 .sbss 000002b8 ffffffff801afab0 ffffffff801afab0 0016fab0 2= **3 ALLOC 14 .bss 000259f0 ffffffff801afd70 ffffffff801afd70 0016fab8 2= **4 ALLOC 15 .mdebug 00084158 ffffffff801d5760 ffffffff801d5760 001700b8 2= **2 CONTENTS, READONLY, DEBUGGING 16 .note 00001720 ffffffff80271978 ffffffff80271978 001f4210 2= **0 CONTENTS, READONLY 17 .modinfo 00000018 ffffffff802730a0 ffffffff802730a0 001700a0 2= **2 CONTENTS, ALLOC, LOAD, READONLY, DATA MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --dc+cDN39EJAMEtIO Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.4 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjq9DwUACgkQHb1edYOZ4bvWpQCfYMvCVvSnOAcn6z1Fs04HpvNB Ns8An3X2UcS6ZLnuDHEQrdcVCCutf3ge =UN4S -----END PGP SIGNATURE----- --dc+cDN39EJAMEtIO-- From owner-linux-mips@oss.sgi.com Sat Mar 24 15:22:03 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2ONM3t04641 for linux-mips-outgoing; Sat, 24 Mar 2001 15:22:03 -0800 Received: from mail.ocs.com.au (ppp0.ocs.com.au [203.34.97.3]) by oss.sgi.com (8.11.3/8.11.3) with SMTP id f2ONM1M04638 for ; Sat, 24 Mar 2001 15:22:01 -0800 Received: (qmail 18652 invoked from network); 24 Mar 2001 23:21:57 -0000 Received: from ocs3.ocs-net (192.168.255.3) by mail.ocs.com.au with SMTP; 24 Mar 2001 23:21:57 -0000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: jbglaw@lug-owl.de cc: linux-mips@oss.sgi.com Subject: Re: elf2ecoff problem In-reply-to: Your message of "Sat, 24 Mar 2001 22:17:58 +0100." <20010324221757.B9810@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 25 Mar 2001 09:21:56 +1000 Message-ID: <32583.985476116@ocs3.ocs-net> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 837 Lines: 17 On Sat, 24 Mar 2001 22:17:58 +0100, Jan-Benedict Glaw wrote: >./elf2ecoff /home/jbglaw/kernel_src/work/mips_linux/linux/vmlinux vmlinux.ecoff -a >Non-contiguous data can't be converted. > 17 .modinfo 00000018 ffffffff802730a0 ffffffff802730a0 001700a0 2**2 > CONTENTS, ALLOC, LOAD, READONLY, DATA This may not be relevant but vmlinux should not have a .modinfo section. .modinfo is only created when code is compiled with -DMODULE so why is it in vmlinux? There was a recent change to the attributes of .modinfo, from CONTENTS, READONLY to CONTENTS, ALLOC, LOAD, READONLY, DATA, this change was to remove gcc warning messages. insmod treats sections .modinfo and .modstring as special cases and turns off the SHF_ALLOC flag, elf2ecoff might need special processing for these sections. From owner-linux-mips@oss.sgi.com Sun Mar 25 13:06:11 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2PL6Bg24349 for linux-mips-outgoing; Sun, 25 Mar 2001 13:06:11 -0800 Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.69]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2PL6AM24346 for ; Sun, 25 Mar 2001 13:06:10 -0800 Received: from bilbo.physik.uni-konstanz.de [134.34.144.81] (8) by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 14hHiD-0005SM-00; Sun, 25 Mar 2001 23:06:09 +0200 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 14hHiC-0000sw-00; Sun, 25 Mar 2001 23:06:08 +0200 Date: Sun, 25 Mar 2001 23:06:08 +0200 From: Guido Guenther To: linux-mips@oss.sgi.com Subject: current cvs kernel doesn't work with egcs 1.1.2/binutils 2.8.1 Message-ID: <20010325230608.A2867@bilbo.physik.uni-konstanz.de> Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 270 Lines: 6 it fails with an unaligned access in emulate_load_store_insn (368) on an Indy/R4600 while doing: kmem_cache_create -> down -> __down -> add_wait_queue -> __add_wait_queue -> list_add -> __list_add it works with the gcc 3.0/binutils 2.11.90 from oss though. -- Guido From owner-linux-mips@oss.sgi.com Sun Mar 25 18:57:23 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2Q2vNn32561 for linux-mips-outgoing; Sun, 25 Mar 2001 18:57:23 -0800 Received: from lacrosse.corp.redhat.com (host154.207-175-42.redhat.com [207.175.42.154]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2Q2vMM32558 for ; Sun, 25 Mar 2001 18:57:22 -0800 Received: from mx.hsv.redhat.com (IDENT:root@spot.hsv.redhat.com [172.16.16.7]) by lacrosse.corp.redhat.com (8.9.3/8.9.3) with ESMTP id VAA19802; Sun, 25 Mar 2001 21:57:11 -0500 Received: from redhat.com (IDENT:joe@dhcp-242.hsv.redhat.com [172.16.17.242] (may be forged)) by mx.hsv.redhat.com (8.11.0/8.11.0) with ESMTP id f2Q2xLx21091; Sun, 25 Mar 2001 20:59:22 -0600 Message-ID: <3ABEB120.8020609@redhat.com> Date: Sun, 25 Mar 2001 21:01:52 -0600 From: Joe deBlaquiere User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.17-14 i686; en-US; 0.8) Gecko/20010217 X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs References: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2890 Lines: 51 Hi Kevin, It's Sunday night, and I always have screwy suggestions for the world at the end of the weekend, so bear with me... And as another worthy collegue noted, these opinions are mine and do not necesarily represent the stance of my company. Kevin D. Kissell wrote: > Here at MIPS Technologies, we use Linux internally > for design verification, experiments, benchmarking, > etc., and as a consequence Carsten Langgaard and > myself have both been active in this forum, and have > tried to help the general Linux/MIPS community as > best we can with the limited time that we can dedicate > to the problem, in terms of suggested patches, bug > fixes, cleanups, integration of needed components > like the FPU emulator, etc. > I have to say that the answers I've gotten on MIPS issues on this list has been exceptionally good, both from the MIPS team and the various other individuals. > I have a question for those of you who are doing > Linux work for *new* platforms (as opposed to the > SGI/DEC legacy box support people). IF, and I > emphasize the word *if*, MIPS Technologies were > make a bigger investment in MIPS/Linux technology, > be it kernel enhancements, cross/native tools, > userland ports, libraries, or whatever, what would > be your prioritized "wish list"? > Just some unsorted random ideas: 1. Would it be possible to lump some of the different MIPS variants together more closely? In my dream world I could build one kernel that would boot on every mips architecture. This way the work can be more general. As it stands now, if you want Tx39 or Vr41 variants you're working out of a different tree. With the number of SoC core products coming out at present, this predicament is only likely to get more serious. I know at one point in time you could boot a single ARM kernel on several different systems and it would adapt it's processor specifics at runtime. Such a design might help to bring the MIPS world together a bit. 2. Tools are always an issue, but as long as new cores keep coming along that have exceptions and additions to the ISA(s), it's going to be good business for gcc engineers... 3. Using glibc in a cross development environment is slightly painful at this time for all architectures. MIPS is no different. Some general work on glibc would be good for the whole world. There has also been some work on other libraries (newlib and uClibc) for especially constrained environments. No MIPS/Linux support is available for either. 4. uClinux support for the systems without MMUs. There is considerable interest in this effort, but I think many people underestimate the magnitude of effort that will be required to have a truly solid port. This effort might be daunting for any one vendor, but could benefit all. -- Joe deBlaquiere Red Hat, Inc. 307 Wynn Drive Huntsville AL, 35805 voice : (256)-704-9257 fax : (256)-837-3839 From owner-linux-mips@oss.sgi.com Sun Mar 25 19:24:38 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2Q3Ocm00726 for linux-mips-outgoing; Sun, 25 Mar 2001 19:24:38 -0800 Received: from sgi.com (sgi.SGI.COM [192.48.153.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2Q3ObM00723 for ; Sun, 25 Mar 2001 19:24:37 -0800 Received: from sydney.sydney.sgi.com ([134.14.48.2]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id TAA02488 for ; Sun, 25 Mar 2001 19:24:36 -0800 (PST) mail_from (kaos@ocs.com.au) Received: from kao2.melbourne.sgi.com by sydney.sydney.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id NAA17034; Mon, 26 Mar 2001 13:23:15 +1000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: Joe deBlaquiere cc: "Kevin D. Kissell" , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs In-reply-to: Your message of "Sun, 25 Mar 2001 21:01:52 CST." <3ABEB120.8020609@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 26 Mar 2001 13:23:15 +1000 Message-ID: <19957.985576995@kao2.melbourne.sgi.com> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1295 Lines: 27 You like long lines, don't you ;) Reflowed for readability. On Sun, 25 Mar 2001 21:01:52 -0600, Joe deBlaquiere wrote: >1. Would it be possible to lump some of the different MIPS variants >together more closely? In my dream world I could build one kernel that >would boot on every mips architecture. This way the work can be more >general. As it stands now, if you want Tx39 or Vr41 variants you're >working out of a different tree. FWIW I am working on a Makefile rewrite for 2.5 which will help with this problem. Instead of one 120Mb kernel source tree for each architecture, 2.5 will support logical kernel source trees and separate source and object directories. The logical source is built up from base kernel code (Linus's tarball) plus zero or more layers that contain additional or different code. So you compile 2.4.x -> ix86 object directory 2.4.x + common mips -> common mips object directory 2.4.x + common mips + Tx39 -> Tx39 object directory 2.4.x + common mips + Vr41 -> Vr41 object directory All use the same untouched 2.4.x tarball as the base. You can compile multiple targets from the same source at the same time, using different object directories. A change to base 2.4.x or to common mips is automatically seen by all the object directories. From owner-linux-mips@oss.sgi.com Sun Mar 25 19:28:10 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2Q3SAa01053 for linux-mips-outgoing; Sun, 25 Mar 2001 19:28:10 -0800 Received: from dea.waldorf-gmbh.de (u-188-10.karlsruhe.ipdial.viaginterkom.de [62.180.10.188]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2Q3S8M01047 for ; Sun, 25 Mar 2001 19:28:08 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2P3aUv18623; Sun, 25 Mar 2001 05:36:30 +0200 Date: Sun, 25 Mar 2001 05:35:54 +0200 From: Ralf Baechle To: Keith Owens Cc: jbglaw@lug-owl.de, linux-mips@oss.sgi.com, Harald Koerfgen Subject: Re: elf2ecoff problem Message-ID: <20010325053554.A18589@bacchus.dhis.org> References: <20010324221757.B9810@lug-owl.de> <32583.985476116@ocs3.ocs-net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <32583.985476116@ocs3.ocs-net>; from kaos@ocs.com.au on Sun, Mar 25, 2001 at 09:21:56AM +1000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1211 Lines: 25 On Sun, Mar 25, 2001 at 09:21:56AM +1000, Keith Owens wrote: > On Sat, 24 Mar 2001 22:17:58 +0100, > Jan-Benedict Glaw wrote: > >./elf2ecoff /home/jbglaw/kernel_src/work/mips_linux/linux/vmlinux vmlinux.ecoff -a > >Non-contiguous data can't be converted. > > 17 .modinfo 00000018 ffffffff802730a0 ffffffff802730a0 001700a0 2**2 > > CONTENTS, ALLOC, LOAD, READONLY, DATA > > This may not be relevant but vmlinux should not have a .modinfo > section. .modinfo is only created when code is compiled with -DMODULE > so why is it in vmlinux? > > There was a recent change to the attributes of .modinfo, from CONTENTS, > READONLY to CONTENTS, ALLOC, LOAD, READONLY, DATA, this change was to > remove gcc warning messages. insmod treats sections .modinfo and > .modstring as special cases and turns off the SHF_ALLOC flag, elf2ecoff > might need special processing for these sections. The .modinfo section gets into vmlinux through drivers/tc/tc.o where it gets created because include/asm-mips/dec/tcmodule.h defines the cpp symbol MODULE; gets included after that and believing this is a module compilation puts some stuff into .modinfo. Ralf From owner-linux-mips@oss.sgi.com Sun Mar 25 19:40:19 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2Q3eJk01698 for linux-mips-outgoing; Sun, 25 Mar 2001 19:40:19 -0800 Received: from deliverator.sgi.com (deliverator.sgi.com [204.94.214.10]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2Q3eGM01691; Sun, 25 Mar 2001 19:40:16 -0800 Received: from sydney.sydney.sgi.com (sydney.sydney.sgi.com [134.14.48.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id TAA02549; Sun, 25 Mar 2001 19:39:01 -0800 (PST) mail_from (kaos@ocs.com.au) Received: from kao2.melbourne.sgi.com by sydney.sydney.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id NAA17825; Mon, 26 Mar 2001 13:38:55 +1000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: Ralf Baechle cc: jbglaw@lug-owl.de, linux-mips@oss.sgi.com, Harald Koerfgen Subject: Re: elf2ecoff problem In-reply-to: Your message of "Sun, 25 Mar 2001 05:35:54 +0200." <20010325053554.A18589@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 26 Mar 2001 13:38:56 +1000 Message-ID: <20271.985577936@kao2.melbourne.sgi.com> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 415 Lines: 9 On Sun, 25 Mar 2001 05:35:54 +0200, Ralf Baechle wrote: >The .modinfo section gets into vmlinux through drivers/tc/tc.o where it >gets created because include/asm-mips/dec/tcmodule.h defines the cpp >symbol MODULE; gets included after that and believing >this is a module compilation puts some stuff into .modinfo. tc will have to use a name other than MODULE, say TC_MODULE. From owner-linux-mips@oss.sgi.com Sun Mar 25 20:06:45 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2Q46jg02397 for linux-mips-outgoing; Sun, 25 Mar 2001 20:06:45 -0800 Received: from mail.foobazco.org (snowman.foobazco.org [198.144.194.230]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2Q46iM02394 for ; Sun, 25 Mar 2001 20:06:44 -0800 Received: from galt.foobazco.org (galt.foobazco.org [198.144.194.227]) by mail.foobazco.org (Postfix) with ESMTP id 50E63109CE; Sun, 25 Mar 2001 20:07:08 -0800 (PST) Received: by galt.foobazco.org (Postfix, from userid 1014) id B47741F429; Sun, 25 Mar 2001 20:06:42 -0800 (PST) Date: Sun, 25 Mar 2001 20:06:42 -0800 From: Keith M Wesolowski To: Joe deBlaquiere Cc: "Kevin D. Kissell" , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs Message-ID: <20010325200642.C25362@foobazco.org> References: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> <3ABEB120.8020609@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3ABEB120.8020609@redhat.com>; from jadb@redhat.com on Sun, Mar 25, 2001 at 09:01:52PM -0600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1365 Lines: 26 On Sun, Mar 25, 2001 at 09:01:52PM -0600, Joe deBlaquiere wrote: > 1. Would it be possible to lump some of the different MIPS variants > together more closely? In my dream world I could build one kernel > that would boot on every mips architecture. This way the work can be > more general. As it stands now, if you want Tx39 or Vr41 variants > you're working out of a different tree. With the number of SoC core > products coming out at present, this predicament is only likely to > get more serious. I know at one point in time you could boot a > single ARM kernel on several different systems and it would adapt > it's processor specifics at runtime. Such a design might help to > bring the MIPS world together a bit. I'm about 2/3 of the way through writing a patch that will bring boot-time machine detection and parameters to mips - this is similar to a scheme that was suggested some time ago by Jun and is also based on a short discussion I had with Ralf about cleaning up proc.c. This is only the first step, though, as there are a lot of ifdefs in headers and such. I will release this patch for review sometime in the next week. -- Keith M Wesolowski http://foobazco.org/~wesolows ------(( Project Foobazco Coordinator and Network Administrator ))------ "I should have crushed his marketing-addled skull with a fucking bat." From owner-linux-mips@oss.sgi.com Sun Mar 25 22:13:28 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2Q6DSa04453 for linux-mips-outgoing; Sun, 25 Mar 2001 22:13:28 -0800 Received: from arianne.in.ishoni.com ([164.164.83.132]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2Q6DNM04450 for ; Sun, 25 Mar 2001 22:13:24 -0800 Received: from deepak ([192.168.1.240]) by arianne.in.ishoni.com (8.11.2/8.11.2) with SMTP id f2Q6Ev925866 for ; Mon, 26 Mar 2001 11:44:59 +0530 Reply-To: From: "Deepak Shenoy" To: Subject: how do i build gcc cross compiler for mips, on host i386 Date: Mon, 26 Mar 2001 11:44:42 +0530 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 328 Lines: 14 I am trying to build Gcc mips cross compiler. I want to use this for compiling 2.4.0 linux. I also want to build libraries. Which are the tar files i would need to download? What is the sequence i should follow when building gcc cross compiler? Information on this would be very helpful for me. Thanks and Regards, deepak From owner-linux-mips@oss.sgi.com Mon Mar 26 08:46:16 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2QGkG926308 for linux-mips-outgoing; Mon, 26 Mar 2001 08:46:16 -0800 Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.69]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2QGkFM26301 for ; Mon, 26 Mar 2001 08:46:15 -0800 Received: from bilbo.physik.uni-konstanz.de [134.34.144.81] (8) by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 14ha8E-0002LM-00; Mon, 26 Mar 2001 18:46:14 +0200 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 14ha8D-0005Lx-00; Mon, 26 Mar 2001 18:46:13 +0200 Date: Mon, 26 Mar 2001 18:46:13 +0200 From: Guido Guenther To: linux-mips@oss.sgi.com Subject: indy's hardware watchdog Message-ID: <20010326184613.A20198@bilbo.physik.uni-konstanz.de> Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 170 Lines: 5 I've written a small module to support the Indy's hardware watchdog. It can be found at: http://honk.physik.uni-konstanz.de/linux-mips/indy-watchdog/ Regards, -- Guido From owner-linux-mips@oss.sgi.com Mon Mar 26 09:19:32 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2QHJWJ27832 for linux-mips-outgoing; Mon, 26 Mar 2001 09:19:32 -0800 Received: from dea.waldorf-gmbh.de (u-200-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.200]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2QHJSM27822 for ; Mon, 26 Mar 2001 09:19:29 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2QHJ4Y08014; Mon, 26 Mar 2001 19:19:04 +0200 Date: Mon, 26 Mar 2001 19:19:04 +0200 From: Ralf Baechle To: Keith Owens Cc: jbglaw@lug-owl.de, linux-mips@oss.sgi.com, Harald Koerfgen Subject: Re: elf2ecoff problem Message-ID: <20010326191904.A7989@bacchus.dhis.org> References: <20010325053554.A18589@bacchus.dhis.org> <20271.985577936@kao2.melbourne.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20271.985577936@kao2.melbourne.sgi.com>; from kaos@ocs.com.au on Mon, Mar 26, 2001 at 01:38:56PM +1000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 494 Lines: 13 On Mon, Mar 26, 2001 at 01:38:56PM +1000, Keith Owens wrote: > Ralf Baechle wrote: > >The .modinfo section gets into vmlinux through drivers/tc/tc.o where it > >gets created because include/asm-mips/dec/tcmodule.h defines the cpp > >symbol MODULE; gets included after that and believing > >this is a module compilation puts some stuff into .modinfo. > > tc will have to use a name other than MODULE, say TC_MODULE. I've now commited a fix to CVS. Ralf From owner-linux-mips@oss.sgi.com Mon Mar 26 09:49:16 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2QHnGI28853 for linux-mips-outgoing; Mon, 26 Mar 2001 09:49:16 -0800 Received: from noose.gt.owl.de (postfix@noose.gt.owl.de [62.52.19.4]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2QHnFM28850 for ; Mon, 26 Mar 2001 09:49:15 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 546CF7F3; Mon, 26 Mar 2001 19:49:13 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 0C120F014; Mon, 26 Mar 2001 19:25:59 +0200 (CEST) Date: Mon, 26 Mar 2001 19:25:59 +0200 From: Florian Lohoff To: Joe deBlaquiere Cc: "Kevin D. Kissell" , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs Message-ID: <20010326192559.A8385@paradigm.rfc822.org> References: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> <3ABEB120.8020609@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: <3ABEB120.8020609@redhat.com>; from jadb@redhat.com on Sun, Mar 25, 2001 at 09:01:52PM -0600 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1373 Lines: 28 On Sun, Mar 25, 2001 at 09:01:52PM -0600, Joe deBlaquiere wrote: > Just some unsorted random ideas: > > 1. Would it be possible to lump some of the different MIPS variants > together more closely? In my dream world I could build one kernel that > would boot on every mips architecture. This way the work can be more > general. As it stands now, if you want Tx39 or Vr41 variants you're > working out of a different tree. With the number of SoC core products > coming out at present, this predicament is only likely to get more > serious. I know at one point in time you could boot a single ARM kernel on > several different systems and it would adapt it's processor specifics at > runtime. Such a design might help to bring the MIPS world together a bit. There is at least a problem with endianess - I dont think there can be a little and big endian kernel coexist in the same object or at least not with major rework. Why would you suggest having vr41 and TX39 in a seperat tree ? I had a look in the linux-vr tree and i dont like some of their #ifdef spaghetti stuff so i am currently working on TX39 stuff on top of the oss tree which could be made cleanly. (Dont integrate all TX39 archs into one subarch *grrr*) Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Mar 26 10:42:58 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2QIgwx30213 for linux-mips-outgoing; Mon, 26 Mar 2001 10:42:58 -0800 Received: from lacrosse.corp.redhat.com (host154.207-175-42.redhat.com [207.175.42.154]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2QIgwM30210 for ; Mon, 26 Mar 2001 10:42:58 -0800 Received: from mx.hsv.redhat.com (IDENT:root@spot.hsv.redhat.com [172.16.16.7]) by lacrosse.corp.redhat.com (8.9.3/8.9.3) with ESMTP id NAA04790; Mon, 26 Mar 2001 13:42:51 -0500 Received: from redhat.com (IDENT:joe@uberdog.hsv.redhat.com [172.16.16.108]) by mx.hsv.redhat.com (8.11.0/8.11.0) with ESMTP id f2QIj7x31555; Mon, 26 Mar 2001 12:45:07 -0600 Message-ID: <3ABF8ED5.2050007@redhat.com> Date: Mon, 26 Mar 2001 12:47:49 -0600 From: Joe deBlaquiere User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.17-14 i686; en-US; 0.8) Gecko/20010217 X-Accept-Language: en MIME-Version: 1.0 To: Florian Lohoff CC: "Kevin D. Kissell" , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs References: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> <3ABEB120.8020609@redhat.com> <20010326192559.A8385@paradigm.rfc822.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1806 Lines: 46 Florian Lohoff wrote: > On Sun, Mar 25, 2001 at 09:01:52PM -0600, Joe deBlaquiere wrote: > >> Just some unsorted random ideas: >> >> 1. Would it be possible to lump some of the different MIPS variants >> together more closely? In my dream world I could build one kernel that >> would boot on every mips architecture. This way the work can be more >> general. As it stands now, if you want Tx39 or Vr41 variants you're >> working out of a different tree. With the number of SoC core products >> coming out at present, this predicament is only likely to get more >> serious. I know at one point in time you could boot a single ARM kernel on >> several different systems and it would adapt it's processor specifics at >> runtime. Such a design might help to bring the MIPS world together a bit. > > > There is at least a problem with endianess - I dont think there can be > a little and big endian kernel coexist in the same object or at least > not with major rework. > Well, yes that would be a problem, but at least within endianess, there's no reason why the processor specific stuff can't be abstracted and attached at runtime. > Why would you suggest having vr41 and TX39 in a seperat tree ? I had a > look in the linux-vr tree and i dont like some of their #ifdef spaghetti > stuff so i am currently working on TX39 stuff on top of the oss tree > which could be made cleanly. (Dont integrate all TX39 archs into one > subarch *grrr*) > It's kinda ugly, but some of that is that the original architecture didn't scale to having many different target platforms. I think a little sane multi-platform infrastructure would make things cleaner and better in the future. > Flo -- Joe deBlaquiere Red Hat, Inc. 307 Wynn Drive Huntsville AL, 35805 voice : (256)-704-9200 fax : (256)-837-3839 From owner-linux-mips@oss.sgi.com Mon Mar 26 11:25:41 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2QJPfG00583 for linux-mips-outgoing; Mon, 26 Mar 2001 11:25:41 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2QJPfM00578 for ; Mon, 26 Mar 2001 11:25:41 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2QJLK015199; Mon, 26 Mar 2001 11:21:20 -0800 Message-ID: <3ABF9683.1D08617B@mvista.com> Date: Mon, 26 Mar 2001 11:20:35 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: carlson@sibyte.com, Matthew Dharm , linux-mips@oss.sgi.com Subject: Re: Multiple processor support? References: <01032316143609.00779@plugh.sibyte.com> <01b801c0b3fb$1770b740$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 545 Lines: 17 "Kevin D. Kissell" wrote: > > (Software cache coherency) It is possible, > but tricky, and at times unavoidably inefficient to build a > software-coherent SMP system. I have not heard of anyone > doing so with MIPS/Linux. > How would it be possible? Any reference to the previous implementations? I imagine you would need at least some kind of atomic operation (like ll/sc) working reliably (which itself may require cache coherency). Also, any such scheme should not require massive change in the programming. I am very curious.... Jun From owner-linux-mips@oss.sgi.com Mon Mar 26 15:28:28 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2QNSSC08693 for linux-mips-outgoing; Mon, 26 Mar 2001 15:28:28 -0800 Received: from hermes.mvista.com (gateway-1237.mvista.com [12.44.186.158]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2QNSSM08690 for ; Mon, 26 Mar 2001 15:28:28 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id f2QNOu031012; Mon, 26 Mar 2001 15:24:56 -0800 Message-ID: <3ABFCF9B.FA35FF9B@mvista.com> Date: Mon, 26 Mar 2001 15:24:11 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.18 i686) X-Accept-Language: en MIME-Version: 1.0 To: Joe deBlaquiere CC: Florian Lohoff , "Kevin D. Kissell" , linux-mips@oss.sgi.com Subject: Re: Embedded MIPS/Linux Needs References: <00eb01c0b2c6$02c7ef60$0deca8c0@Ulysses> <3ABEB120.8020609@redhat.com> <20010326192559.A8385@paradigm.rfc822.org> <3ABF8ED5.2050007@redhat.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1207 Lines: 24 Joe deBlaquiere wrote: > > Why would you suggest having vr41 and TX39 in a seperat tree ? I had a > > look in the linux-vr tree and i dont like some of their #ifdef spaghetti > > stuff so i am currently working on TX39 stuff on top of the oss tree > > which could be made cleanly. (Dont integrate all TX39 archs into one > > subarch *grrr*) > > > > It's kinda ugly, but some of that is that the original architecture didn't scale to having many different target platforms. I think a little sane multi-platform infrastructure would make things cleaner and better in the future. > I was trying to move Vr41xx from linux-vr to oss tree and found a couple of problems. The most serious one that is that NEC Vr41xx TLB entry format is slightly different from all other R4K-compatible CPUs. Fixing this requires either an ugly #ifdef in some common header files, or massively code re-writing for all TLB related stuff. Neither one is good. I actually worked out a patch based on #ifdef approach, but a little too "shameful" to submit it. My feeling is that we need to separate TLB code from cache code and introduce some way to plug in different TLB codes. Then we can get V41xx integrated nicely. Jun From owner-linux-mips@oss.sgi.com Mon Mar 26 21:38:27 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2R5cRb16629 for linux-mips-outgoing; Mon, 26 Mar 2001 21:38:27 -0800 Received: from boco.fee.vutbr.cz (boco.fee.vutbr.cz [147.229.9.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2R5cMM16624 for ; Mon, 26 Mar 2001 21:38:22 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f2R5cAt77271 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Tue, 27 Mar 2001 07:38:10 +0200 (CEST) Received: (from xjezda00@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f2R5c9455687; Tue, 27 Mar 2001 07:38:09 +0200 (CEST) Date: Tue, 27 Mar 2001 07:38:09 +0200 From: David Jez To: Guido Guenther Cc: linux-mips@oss.sgi.com Subject: Re: indy's hardware watchdog Message-ID: <20010327073809.B55390@stud.fee.vutbr.cz> References: <20010326184613.A20198@bilbo.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010326184613.A20198@bilbo.physik.uni-konstanz.de>; from guido.guenther@gmx.net on Mon, Mar 26, 2001 at 06:46:13PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 478 Lines: 11 > I've written a small module to support the Indy's hardware watchdog. > It can be found at: > http://honk.physik.uni-konstanz.de/linux-mips/indy-watchdog/ Great. Thanks Guido. Btw. do you know if video input on indy is supported? -- ------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: dave.jez@seznam.cz PGP key: finger xjezda00@fest.stud.fee.vutbr.cz ---------=[ ~EOF ]=------------------------------------ From owner-linux-mips@oss.sgi.com Tue Mar 27 09:55:35 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RHtZB03701 for linux-mips-outgoing; Tue, 27 Mar 2001 09:55:35 -0800 Received: from woody.ichilton.co.uk (woody.ichilton.co.uk [216.29.174.40]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RHtZM03697 for ; Tue, 27 Mar 2001 09:55:35 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 1000) id D26DA8030; Tue, 27 Mar 2001 18:55:34 +0100 (BST) Date: Tue, 27 Mar 2001 18:55:34 +0100 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Re: indy's hardware watchdog Message-ID: <20010327185534.C3617@woody.ichilton.co.uk> Reply-To: Ian Chilton References: <20010326184613.A20198@bilbo.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.13i In-Reply-To: <20010326184613.A20198@bilbo.physik.uni-konstanz.de>; from guido.guenther@gmx.net on Mon, Mar 26, 2001 at 06:46:13PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 259 Lines: 17 Hello, > I've written a small module to support the Indy's hardware watchdog. Great, well done Guido! I'll put a link to this on the Linux/MIPS site. Shame it doesn't help when kernel debugging and the machine hangs at the PROM :-( Bye for Now, Ian From owner-linux-mips@oss.sgi.com Tue Mar 27 09:54:30 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RHsUP03589 for linux-mips-outgoing; Tue, 27 Mar 2001 09:54:30 -0800 Received: from woody.ichilton.co.uk (woody.ichilton.co.uk [216.29.174.40]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RHsPM03584 for ; Tue, 27 Mar 2001 09:54:25 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 1000) id DDDFF8030; Tue, 27 Mar 2001 18:54:23 +0100 (BST) Date: Tue, 27 Mar 2001 18:54:23 +0100 From: Ian Chilton To: David Jez Cc: linux-mips@oss.sgi.com, guido.guenther@gmx.net Subject: Re: indy's hardware watchdog Message-ID: <20010327185423.B3617@woody.ichilton.co.uk> Reply-To: Ian Chilton References: <20010326184613.A20198@bilbo.physik.uni-konstanz.de> <20010327073809.B55390@stud.fee.vutbr.cz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.13i In-Reply-To: <20010327073809.B55390@stud.fee.vutbr.cz>; from dave.jez@seznam.cz on Tue, Mar 27, 2001 at 07:38:09AM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 300 Lines: 21 Hello, > Btw. do you know if video input on indy is supported? No, it isn't. But, Ulf (grimsy) did start writing a driver for it, but never finished. If you look in any kernel tree, under drivers/char/ you will find vino.c and vino.h We just need someone to finish it :) Bye for Now, Ian From owner-linux-mips@oss.sgi.com Tue Mar 27 10:02:26 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RI2Qa04160 for linux-mips-outgoing; Tue, 27 Mar 2001 10:02:26 -0800 Received: from noose.gt.owl.de (postfix@noose.gt.owl.de [62.52.19.4]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RI2PM04154 for ; Tue, 27 Mar 2001 10:02:26 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 4D8C17FA; Tue, 27 Mar 2001 20:02:24 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id C120AF014; Tue, 27 Mar 2001 20:02:19 +0200 (CEST) Date: Tue, 27 Mar 2001 20:02:19 +0200 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: loop stuff Message-ID: <20010327200219.B32706@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 438 Lines: 12 Hi, does anyone know if the 2.4.2 kernel does support loop devices - I mean in the sense of - "It works" - I do have problems with processes like mke2fs getting hung while accessing the loop without any error message. I am not running 2.4.x on any other platform so i cant verify ... Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Tue Mar 27 10:02:26 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RI2QA04159 for linux-mips-outgoing; Tue, 27 Mar 2001 10:02:26 -0800 Received: from noose.gt.owl.de (postfix@noose.gt.owl.de [62.52.19.4]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RI2PM04153 for ; Tue, 27 Mar 2001 10:02:26 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 2449B7F8; Tue, 27 Mar 2001 20:02:24 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 19796F014; Tue, 27 Mar 2001 20:01:05 +0200 (CEST) Date: Tue, 27 Mar 2001 20:01:05 +0200 From: Florian Lohoff To: David Jez Cc: Guido Guenther , linux-mips@oss.sgi.com Subject: Re: indy's hardware watchdog Message-ID: <20010327200105.A32706@paradigm.rfc822.org> References: <20010326184613.A20198@bilbo.physik.uni-konstanz.de> <20010327073809.B55390@stud.fee.vutbr.cz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.15i In-Reply-To: <20010327073809.B55390@stud.fee.vutbr.cz>; from dave.jez@seznam.cz on Tue, Mar 27, 2001 at 07:38:09AM +0200 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 464 Lines: 13 On Tue, Mar 27, 2001 at 07:38:09AM +0200, David Jez wrote: > > I've written a small module to support the Indy's hardware watchdog. > > It can be found at: > > http://honk.physik.uni-konstanz.de/linux-mips/indy-watchdog/ > Great. Thanks Guido. Btw. do you know if video input on indy is supported? It isnt. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Tue Mar 27 10:06:45 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RI6j804661 for linux-mips-outgoing; Tue, 27 Mar 2001 10:06:45 -0800 Received: from pobox.sibyte.com (pobox.sibyte.com [208.12.96.20]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RI6jM04658 for ; Tue, 27 Mar 2001 10:06:45 -0800 Received: from postal.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id 60402205FE; Tue, 27 Mar 2001 10:06:39 -0800 (PST) Received: from SMTP agent by mail gateway Tue, 27 Mar 2001 09:59:29 -0800 Received: from plugh.sibyte.com (plugh.sibyte.com [10.21.64.158]) by postal.sibyte.com (Postfix) with ESMTP id AFA6F1595F; Tue, 27 Mar 2001 10:06:39 -0800 (PST) Received: by plugh.sibyte.com (Postfix, from userid 61017) id 087A5686D; Tue, 27 Mar 2001 10:09:00 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: Florian Lohoff , linux-mips@oss.sgi.com Subject: Re: loop stuff Date: Tue, 27 Mar 2001 10:06:46 -0800 X-Mailer: KMail [version 1.0.29] Content-Type: text/plain References: <20010327200219.B32706@paradigm.rfc822.org> In-Reply-To: <20010327200219.B32706@paradigm.rfc822.org> MIME-Version: 1.0 Message-Id: <0103271008591B.00779@plugh.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 594 Lines: 15 On Tue, 27 Mar 2001, Florian Lohoff wrote: > Hi, > does anyone know if the 2.4.2 kernel does support loop devices - I mean > in the sense of - "It works" - I do have problems with processes like > mke2fs getting hung while accessing the loop without any error message. > > I am not running 2.4.x on any other platform so i cant verify ... > This probably isn't a MIPS specific problem. It's supposed to be fixed by some of Jens Axboe's latest stuff, as well as in the 2.4.2ac series on kernel.org; I'd guess it will be fixed when 2.4.3 is released and imported to cvs@oss.sgi.com. -Justin From owner-linux-mips@oss.sgi.com Tue Mar 27 10:22:33 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RIMXi05279 for linux-mips-outgoing; Tue, 27 Mar 2001 10:22:33 -0800 Received: from appliedmicro.ns.ca (dragon.appliedmicro.ns.ca [24.222.12.66]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RIMWM05275 for ; Tue, 27 Mar 2001 10:22:32 -0800 Received: by dragon.appliedmicro.ns.ca id <7308>; Tue, 27 Mar 2001 14:14:32 -0400 Date: Tue, 27 Mar 2001 14:21:16 -0400 To: Florian Lohoff Cc: linux-mips@oss.sgi.com Subject: Re: loop stuff Message-Id: <01Mar27.141432ast.7308@dragon.appliedmicro.ns.ca> References: <20010327200219.B32706@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.12i In-Reply-To: <20010327200219.B32706@paradigm.rfc822.org>; from flo@rfc822.org on Tue, Mar 27, 2001 at 02:02:19PM -0400 From: fifield@amirix.com (Jamie Fifield) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 992 Lines: 30 I think Jens' latest loop patches made it into 2.4.3-pre3 (or pre4). Anyway, they're working fine for me on my IA32 workstation. jamie:~$ uname -a Linux jamie 2.4.3-pre8 #1 Mon Mar 26 11:37:58 AST 2001 i686 unknown On Tue, Mar 27, 2001 at 02:02:19PM -0400, Florian Lohoff wrote: > Hi, > does anyone know if the 2.4.2 kernel does support loop devices - I mean > in the sense of - "It works" - I do have problems with processes like > mke2fs getting hung while accessing the loop without any error message. > > I am not running 2.4.x on any other platform so i cant verify ... > > Flo > -- > Florian Lohoff flo@rfc822.org +49-5201-669912 > Why is it called "common sense" when nobody seems to have any? > -- Jamie Fifield Software Designer Jamie.Fifield@amirix.com AMIRIX Systems Inc. http://www.amirix.com/ Embedded Debian Project http://www.emdebian.org/ 77 Chain Lake Drive 902-450-1700 x247 (Phone) Halifax, N.S. B3S 1E1 902-450-1704 (FAX) From owner-linux-mips@oss.sgi.com Tue Mar 27 10:24:16 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RIOGx05559 for linux-mips-outgoing; Tue, 27 Mar 2001 10:24:16 -0800 Received: from delta.ds2.pg.gda.pl (macro@delta.ds2.pg.gda.pl [213.192.72.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RIOBM05551 for ; Tue, 27 Mar 2001 10:24:14 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id UAA22261; Tue, 27 Mar 2001 20:24:13 +0200 (MET DST) Date: Tue, 27 Mar 2001 20:24:12 +0200 (MET DST) From: "Maciej W. Rozycki" To: Keith M Wesolowski cc: David Jez , Karel van Houten , linux-mips@oss.sgi.com Subject: Re: rpm crashing on RH 7.0 indy In-Reply-To: <20010317093919.A19754@foobazco.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1086 Lines: 23 On Sat, 17 Mar 2001, Keith M Wesolowski wrote: > That's not the problem. The problem is that static binaries which use > libdl used to be (and perhaps still are) broken. The reason it's > using libdl is that the nss libraries are never truly static, unless > you compile glibc with a special non-recommended option. I have > indications that this may be fixed in glibc 2.2.2 using my current > toolchain, but my information is not complete. Glibc is fine; it's the kernel that needs a fix (I've sent it here already once or twice). We might possibly consider putting a workaround into glibc as well. The problem is mmap() fails if a non-zero preferred address is given but the space is already occupied and no space *above* is available (space below is not taken into account). A glibc workaround might be to call mmap() again with no preferred address specified this time. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Mar 27 11:03:10 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RJ3Av06686 for linux-mips-outgoing; Tue, 27 Mar 2001 11:03:10 -0800 Received: from delta.ds2.pg.gda.pl (macro@delta.ds2.pg.gda.pl [213.192.72.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RJ38M06683 for ; Tue, 27 Mar 2001 11:03:08 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id VAA23797; Tue, 27 Mar 2001 21:02:36 +0200 (MET DST) Date: Tue, 27 Mar 2001 21:02:33 +0200 (MET DST) From: "Maciej W. Rozycki" To: Karel van Houten cc: Simon Gee , linux-mips@oss.sgi.com Subject: Re: Recommended toolchain In-Reply-To: <200103202012.VAA07412@sparta.research.kpn.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 813 Lines: 21 On Tue, 20 Mar 2001, Karel van Houten wrote: > Well, I'm currently using: > binutils 2.10.1 > gcc 2.95.3 (with Maciej's patches) > glibc 2.2.2 (compiled with above toolchain). > > This toolchain works for native compiles on my mipsel box. > One drawback: I can't compile any kernels with this setup, > For kernel compiles I use 2.8.1/egcs-2.90.27/glibc-2.0.6. What's wrong with the toolchain wrt the kernel now? I've been compiling 2.4 kernels successfully till the end of January -- it's just a lack of time and a nasty bug I want to track down that stop me from trying to compile a new kernel these days. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Mar 27 14:04:24 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2RM4Oh11930 for linux-mips-outgoing; Tue, 27 Mar 2001 14:04:24 -0800 Received: from woody.ichilton.co.uk (woody.ichilton.co.uk [216.29.174.40]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2RM4NM11927 for ; Tue, 27 Mar 2001 14:04:24 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 1000) id 1A756802F; Tue, 27 Mar 2001 23:04:23 +0100 (BST) Date: Tue, 27 Mar 2001 23:04:22 +0100 From: Ian Chilton To: Michl Ladislav Cc: linux-mips@oss.sgi.com Subject: Vino Video / Indycam (was Re: indy's hardware watchdog) Message-ID: <20010327230422.A4071@woody.ichilton.co.uk> Reply-To: Ian Chilton References: <20010327185423.B3617@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.13i In-Reply-To: ; from xmichl03@stud.fee.vutbr.cz on Tue, Mar 27, 2001 at 09:57:25PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 508 Lines: 33 Hello, > > If you look in any kernel tree, under drivers/char/ you will find > > vino.c and vino.h > well, i found them under drivers/media/video/ Seems they have been moved in 2.4. In 2.2.18: [ian@buzz:/usr/src/linux/drivers/char]$ ls vino* vino.c vino.h In 2.4.2: [ian@dipsy:/usr/src/linux/drivers/media/video]$ ls vino* vino.c [ian@dipsy:/usr/src/linux/drivers/char]$ ls vino* vino.h > but haven't any hw docs. Yes, they are in: ftp://oss.sgi.com/pub/linux/mips/doc/indy/ Bye for Now, Ian From owner-linux-mips@oss.sgi.com Tue Mar 27 23:12:49 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2S7Cnv28089 for linux-mips-outgoing; Tue, 27 Mar 2001 23:12:49 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2S7CmM28086 for ; Tue, 27 Mar 2001 23:12:48 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id XAA06430; Tue, 27 Mar 2001 23:07:34 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id XAA15408; Tue, 27 Mar 2001 23:07:31 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id JAA27891; Wed, 28 Mar 2001 09:06:49 +0200 (MEST) Message-ID: <3AC18D89.A2A4386A@mips.com> Date: Wed, 28 Mar 2001 09:06:49 +0200 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: "Maciej W. Rozycki" CC: Keith M Wesolowski , David Jez , Karel van Houten , linux-mips@oss.sgi.com Subject: Re: rpm crashing on RH 7.0 indy References: Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1546 Lines: 39 "Maciej W. Rozycki" wrote: > On Sat, 17 Mar 2001, Keith M Wesolowski wrote: > > > That's not the problem. The problem is that static binaries which use > > libdl used to be (and perhaps still are) broken. The reason it's > > using libdl is that the nss libraries are never truly static, unless > > you compile glibc with a special non-recommended option. I have > > indications that this may be fixed in glibc 2.2.2 using my current > > toolchain, but my information is not complete. > > Glibc is fine; it's the kernel that needs a fix (I've sent it here > already once or twice). We might possibly consider putting a workaround > into glibc as well. Have the kernel fix made it into the CVS. If not, could you please resent it. > > > The problem is mmap() fails if a non-zero preferred address is given but > the space is already occupied and no space *above* is available (space > below is not taken into account). A glibc workaround might be to call > mmap() again with no preferred address specified this time. > > -- > + Maciej W. Rozycki, Technical University of Gdansk, Poland + > +--------------------------------------------------------------+ > + e-mail: macro@ds2.pg.gda.pl, PGP key available + -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Wed Mar 28 06:14:25 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SEEPw04473 for linux-mips-outgoing; Wed, 28 Mar 2001 06:14:25 -0800 Received: from delta.ds2.pg.gda.pl (delta.ds2.pg.gda.pl [213.192.72.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SE9PM04360 for ; Wed, 28 Mar 2001 06:09:38 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id PAA25740; Wed, 28 Mar 2001 15:50:34 +0200 (MET DST) Date: Wed, 28 Mar 2001 15:50:34 +0200 (MET DST) From: "Maciej W. Rozycki" To: Carsten Langgaard cc: Keith M Wesolowski , David Jez , Karel van Houten , linux-mips@oss.sgi.com Subject: Re: rpm crashing on RH 7.0 indy In-Reply-To: <3AC18D89.A2A4386A@mips.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2099 Lines: 74 On Wed, 28 Mar 2001, Carsten Langgaard wrote: > Have the kernel fix made it into the CVS. > If not, could you please resent it. I do not consider it clean enough for inclusion into the official kernel at this stage. It works, though. When appropriately cleaned up, I'll submit it to Linus as it's not MIPS-specific and affects all systems -- mmap() fails equally badly on an i386, for example. No time to work on the patch at the moment, sorry. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + patch-2.4.0-test4-mmap-3 diff -u --recursive --new-file linux-2.4.0-test4.macro/mm/mmap.c linux-2.4.0-test4/mm/mmap.c --- linux-2.4.0-test4.macro/mm/mmap.c Sun Jul 16 22:27:29 2000 +++ linux-2.4.0-test4/mm/mmap.c Tue Jul 25 05:06:21 2000 @@ -175,7 +175,7 @@ if ((len = PAGE_ALIGN(len)) == 0) return addr; - if (len > TASK_SIZE || addr > TASK_SIZE-len) + if (len > TASK_SIZE || ((flags & MAP_FIXED) && (addr > TASK_SIZE - len))) return -EINVAL; /* offset overflow? */ @@ -356,20 +356,31 @@ unsigned long get_unmapped_area(unsigned long addr, unsigned long len) { struct vm_area_struct * vmm; + int pass = 0; if (len > TASK_SIZE) return 0; - if (!addr) - addr = TASK_UNMAPPED_BASE; - addr = PAGE_ALIGN(addr); - - for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { - /* At this point: (!vmm || addr < vmm->vm_end). */ - if (TASK_SIZE - len < addr) - return 0; - if (!vmm || addr + len <= vmm->vm_start) - return addr; - addr = vmm->vm_end; + + while (1) { + if (!addr) + addr = TASK_UNMAPPED_BASE; + addr = PAGE_ALIGN(addr); + + for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { + /* At this point: (!vmm || addr < vmm->vm_end). */ + if (TASK_SIZE - len < addr) { + if (pass > 0) + return 0; + else { + pass = 1; + addr = 0; + break; + } + } + if (!vmm || addr + len <= vmm->vm_start) + return addr; + addr = vmm->vm_end; + } } } #endif From owner-linux-mips@oss.sgi.com Wed Mar 28 07:52:15 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SFqF707056 for linux-mips-outgoing; Wed, 28 Mar 2001 07:52:15 -0800 Received: from boco.fee.vutbr.cz (boco.fee.vutbr.cz [147.229.9.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SFqEM07047 for ; Wed, 28 Mar 2001 07:52:14 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f2SFqBt13776 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Wed, 28 Mar 2001 17:52:12 +0200 (CEST) Received: (from xjezda00@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f2SFqBl58620; Wed, 28 Mar 2001 17:52:11 +0200 (CEST) Date: Wed, 28 Mar 2001 17:52:10 +0200 From: David Jez To: Ian Chilton Cc: linux-mips@oss.sgi.com, guido.guenther@gmx.net Subject: Re: indy's hardware watchdog Message-ID: <20010328175210.B56054@stud.fee.vutbr.cz> References: <20010326184613.A20198@bilbo.physik.uni-konstanz.de> <20010327073809.B55390@stud.fee.vutbr.cz> <20010327185423.B3617@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010327185423.B3617@woody.ichilton.co.uk>; from mailinglist@ichilton.co.uk on Tue, Mar 27, 2001 at 06:54:23PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 556 Lines: 17 > > Btw. do you know if video input on indy is supported? > > But, Ulf (grimsy) did start writing a driver for it, but never > finished. > > If you look in any kernel tree, under drivers/char/ you will find > vino.c and vino.h > > We just need someone to finish it :) Thanks, I'll checked this sources ;-) -- ------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: dave.jez@seznam.cz PGP key: finger xjezda00@fest.stud.fee.vutbr.cz ---------=[ ~EOF ]=------------------------------------ From owner-linux-mips@oss.sgi.com Wed Mar 28 07:57:12 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SFvCM07649 for linux-mips-outgoing; Wed, 28 Mar 2001 07:57:12 -0800 Received: from boco.fee.vutbr.cz (boco.fee.vutbr.cz [147.229.9.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SFvBM07646 for ; Wed, 28 Mar 2001 07:57:11 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f2SFv9t14543 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Wed, 28 Mar 2001 17:57:10 +0200 (CEST) Received: (from xjezda00@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f2SFv9T59024; Wed, 28 Mar 2001 17:57:09 +0200 (CEST) Date: Wed, 28 Mar 2001 17:57:09 +0200 From: David Jez To: Florian Lohoff Cc: linux-mips@oss.sgi.com Subject: Re: loop stuff Message-ID: <20010328175709.C56054@stud.fee.vutbr.cz> References: <20010327200219.B32706@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010327200219.B32706@paradigm.rfc822.org>; from flo@rfc822.org on Tue, Mar 27, 2001 at 08:02:19PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 738 Lines: 17 > Hi, Hi Flo, > does anyone know if the 2.4.2 kernel does support loop devices - I mean > in the sense of - "It works" - I do have problems with processes like > mke2fs getting hung while accessing the loop without any error message. > > I am not running 2.4.x on any other platform so i cant verify ... Unfortunately this isn't a problem with MIPS platform but whole kernel. Loopback is broken. You can use mke2fs -o loop instead /dev/loop0, because loop device will goes to hell. -- ------------------------------------------------------- David "Dave" Jez Brno, CZ, Europe E-mail: dave.jez@seznam.cz PGP key: finger xjezda00@fest.stud.fee.vutbr.cz ---------=[ ~EOF ]=------------------------------------ From owner-linux-mips@oss.sgi.com Wed Mar 28 08:25:56 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SGPuj09181 for linux-mips-outgoing; Wed, 28 Mar 2001 08:25:56 -0800 Received: from delta.ds2.pg.gda.pl (delta.ds2.pg.gda.pl [213.192.72.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SGMFM09079 for ; Wed, 28 Mar 2001 08:22:23 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id SAA01783; Wed, 28 Mar 2001 18:09:38 +0200 (MET DST) Date: Wed, 28 Mar 2001 18:09:37 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Keith M Wesolowski cc: Brady Brown , SGI news group Subject: Re: Tools miss-compile old kernel In-Reply-To: <20010322164659.A6068@foobazco.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1321 Lines: 26 On Thu, 22 Mar 2001, Keith M Wesolowski wrote: > Upgrade to CVS binutils. The one Maciej has on his site is apparently > broken. If you want a toolchain that is known to work at least in > some cases, you can pull it from > ftp://oss.sgi.com/pub/linux/mips/mips-linux/simple/crossdev/. That is > the toolchain I use to build kernels -and- userland (yes, I know, > everyone says it can't be done, but...) and thus it Works For Me (TM). Weird, I've always used tools I packaged for both kernel and userland builds and I had no troubles. The latest 2.10.91 version available at my site should be fine. I've only tested it with an R3k, though. I'm actually going to upgrade it to 2.11 ASAP, but I won't do it until I track down a weird kernel bug which is reproducibly triggered by a native mipsel-linux build -- the kernel crashes completely and silently after sed is invoked in a specific place upon running the libtool script in the ld directory. I suspect a corruption bug as the crash disappears if the script is modified a bit (e.g. some white space is added), so I'm actually glad I got bitten by the bug. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Mar 28 11:19:04 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SJJ4P13070 for linux-mips-outgoing; Wed, 28 Mar 2001 11:19:04 -0800 Received: from boco.fee.vutbr.cz (boco.fee.vutbr.cz [147.229.9.11]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SJJ3M13067 for ; Wed, 28 Mar 2001 11:19:03 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.3/8.11.3) with ESMTP id f2SJJ0t58494 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK) for ; Wed, 28 Mar 2001 21:19:01 +0200 (CEST) Received: (from xmichl03@localhost) by fest.stud.fee.vutbr.cz (8.11.2/8.11.2) id f2SJIxe67033; Wed, 28 Mar 2001 21:18:59 +0200 (CEST) From: Michl Ladislav Date: Wed, 28 Mar 2001 21:18:59 +0200 (CEST) X-processed: pine.send To: Subject: newport console can do set_font Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 4881 Lines: 200 hi all, i hope this is the right place to send this. comments and corrections are welcome. regards, ladis Index: drivers/video/newport_con.c =================================================================== RCS file: /cvs/linux/drivers/video/newport_con.c,v retrieving revision 1.23 diff -a -u -r1.23 newport_con.c --- drivers/video/newport_con.c 2000/11/23 02:00:54 1.23 +++ drivers/video/newport_con.c 2001/03/28 19:12:34 @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -38,6 +39,14 @@ #define FONT_DATA ((unsigned char *)font_vga_8x16.data) +/* borrowed from fbcon.c */ +#define REFCOUNT(fd) (((int *)(fd))[-1]) +#define FNTSIZE(fd) (((int *)(fd))[-2]) +#define FNTCHARCNT(fd) (((int *)(fd))[-3]) +#define FONT_EXTRA_WORDS 3 + +static unsigned char *font_data[MAX_NR_CONSOLES]; + extern struct newport_regs *npregs; static int logo_active; @@ -274,6 +283,7 @@ static const char * __init newport_startup(void) #endif { + int i; struct newport_regs *p; npregs = (struct newport_regs *) (KSEG1 + 0x1f0f0000); @@ -289,11 +299,14 @@ return NULL; } + for (i = 0; i < MAX_NR_CONSOLES; i++) + font_data[i] = FONT_DATA; + newport_reset (); newport_get_revisions(); newport_get_screensize(); - // gfx_init (display_desc); + /* gfx_init (display_desc); */ return "SGI Newport"; } @@ -329,7 +342,7 @@ { unsigned char *p; - p = &FONT_DATA[(charattr & 0xff) << 4]; + p = &font_data[vc->vc_num][(charattr & 0xff) << 4]; charattr = (charattr >> 8) & 0xff; xpos <<= 3; ypos <<= 4; @@ -378,7 +391,7 @@ NPORT_DMODE0_L32); for (i = 0; i < count; i++, xpos += 8) { - p = &FONT_DATA[(s[i] & 0xff) << 4]; + p = &font_data[vc->vc_num][(s[i] & 0xff) << 4]; newport_wait(); @@ -446,11 +459,82 @@ return 1; } -static int newport_font_op(struct vc_data *vc, struct console_font_op *f) +static int newport_set_font(int unit, struct console_font_op *op) { - return -ENOSYS; + int w = op->width; + int h = op->height; + int size = h * op->charcount; + int i; + unsigned char *new_data, *data = op->data, *p; + + /* ladis: when I grow up, there will be a day... and more sizes will + * be supported ;-) */ + if ((w != 8) || (h != 16) || (op->charcount != 256 && op->charcount != 512)) + return -EINVAL; + + if (!(new_data = kmalloc(FONT_EXTRA_WORDS * sizeof(int) + size, GFP_USER))) + return -ENOMEM; + + new_data += FONT_EXTRA_WORDS * sizeof(int); + FNTSIZE(new_data) = size; + FNTCHARCNT(new_data) = op->charcount; + REFCOUNT(new_data) = 0; /* usage counter */ + + p = new_data; + for (i = 0; i < op->charcount; i++) { + memcpy(p, data, h); + data += 32; + p += h; + } + + /* check if font is already used by other console */ + for (i = 0; i < MAX_NR_CONSOLES; i++) { + if (font_data[i] != FONT_DATA && FNTSIZE(font_data[i]) == size + && !memcmp(font_data[i], new_data, size)) { + kfree(new_data - FONT_EXTRA_WORDS * sizeof(int)); + /* current font is the same as the new one */ + if (i == unit) + return 0; + new_data = font_data[i]; + break; + } + } + /* old font is user font */ + if (font_data[unit] != FONT_DATA) { + if (--REFCOUNT(font_data[unit]) == 0) + kfree(font_data[unit] - FONT_EXTRA_WORDS * sizeof(int)); + } + REFCOUNT(new_data)++; + font_data[unit] = new_data; + + return 0; } +static int newport_set_def_font(int unit, struct console_font_op *op) +{ + if (font_data[unit] != FONT_DATA) { + if (--REFCOUNT(font_data[unit]) == 0) + kfree(font_data[unit] - FONT_EXTRA_WORDS * sizeof(int)); + font_data[unit] = FONT_DATA; + } + + return 0; +} + +static int newport_font_op(struct vc_data *vc, struct console_font_op *op) +{ + int unit = vc->vc_num; + + switch (op->op) { + case KD_FONT_OP_SET: + return newport_set_font(unit, op); + case KD_FONT_OP_SET_DEFAULT: + return newport_set_def_font(unit, op); + default: + return -ENOSYS; + } +} + static int newport_set_palette(struct vc_data *vc, unsigned char *table) { return -EINVAL; @@ -594,21 +678,21 @@ }; #ifdef MODULE - -int init_module(void) { - if (!newport_startup()) - printk("Error loading SGI Newport Console driver\n"); - else - printk("Loading SGI Newport Console Driver\n"); - take_over_console(&newport_con,0,MAX_NR_CONSOLES-1,1); - - return 0; +int init_module(void) +{ + if (!newport_startup()) + printk("Error loading SGI Newport Console driver\n"); + else + printk("Loading SGI Newport Console Driver\n"); + take_over_console(&newport_con,0,MAX_NR_CONSOLES-1,1); + return 0; } -int cleanup_module(void) { - printk("Unloading SGI Newport Console Driver\n"); - return 0; +int cleanup_module(void) +{ + printk("Unloading SGI Newport Console Driver\n"); + return 0; } #endif From owner-linux-mips@oss.sgi.com Wed Mar 28 11:50:47 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SJolA14076 for linux-mips-outgoing; Wed, 28 Mar 2001 11:50:47 -0800 Received: from gw-us4.philips.com (gw-us4.philips.com [63.114.235.90]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SJokM14073 for ; Wed, 28 Mar 2001 11:50:46 -0800 Received: from smtprelay-us1.philips.com (localhost.philips.com [127.0.0.1]) by gw-us4.philips.com with ESMTP id NAA26312; Wed, 28 Mar 2001 13:50:32 -0600 (CST) (envelope-from rajesh.palani@philips.com) From: rajesh.palani@philips.com Received: from smtprelay-nam2.philips.com(167.81.233.16) by gw-us4.philips.com via mwrap (4.0a) id xma026310; Wed, 28 Mar 01 13:50:32 -0600 Received: from AMLMS01.DIAMOND.PHILIPS.COM (amlms01sv1.diamond.philips.com [161.88.79.213]) by smtprelay-us1.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id NAA29269; Wed, 28 Mar 2001 13:50:32 -0600 (CST) Received: by AMLMS01.DIAMOND.PHILIPS.COM (Soft-Switch LMS 4.0) with snapi via AMEC id 0056910011132437; Wed, 28 Mar 2001 13:53:04 -0600 To: , Subject: Problem with using modutils Message-ID: <0056910011132437000002L172*@MHS> Date: Wed, 28 Mar 2001 13:53:04 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; name="MEMO 03/28/01 13:50:07" Content-Disposition: inline Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by oss.sgi.com id f2SJokM14074 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 940 Lines: 20 Hi, I am trying to use insmod on a MIPS platform. I try to install a simple module & get the following errors: local symbol gcc2_compiled. with index 10 exceeds local_symtab_size 10 local symbol __gnu_compiled_c with index 11 exceeds local_symtab_size 10 I use the following line for generating the object file: mipsel-linux-gcc -D__KERNEL__ -DMODULE -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -mcpu=r3000 -mlong-calls -mips1 -pipe -c I am using modutils version 2.3.11. We have tried both Debian and RedHat sources cross-compiled for MIPS with the following options: CC=mipsel-linux-gcc CFLAGS="-I../linux/include -DMIPS" RANLIB=mipsel-linux-ranlib AR=mipsel-linux-ar ./configure --disable-kerneld --disable-compat-2-0 --enable-insmod-static --target=mipsel-linux However the problem still remains. Any pointers would be greatly appreciated. Best regards, Rajesh From owner-linux-mips@oss.sgi.com Wed Mar 28 14:20:03 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SMK3417554 for linux-mips-outgoing; Wed, 28 Mar 2001 14:20:03 -0800 Received: from dea.waldorf-gmbh.de (u-138-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.138]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SMJlM17549 for ; Wed, 28 Mar 2001 14:19:57 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2SMJVR04755; Thu, 29 Mar 2001 00:19:31 +0200 Date: Thu, 29 Mar 2001 00:19:31 +0200 From: Ralf Baechle To: rajesh.palani@philips.com Cc: , Subject: Re: Problem with using modutils Message-ID: <20010329001931.B4585@bacchus.dhis.org> References: <0056910011132437000002L172*@MHS> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <0056910011132437000002L172*@MHS>; from rajesh.palani@philips.com on Wed, Mar 28, 2001 at 01:53:04PM -0600 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1260 Lines: 25 On Wed, Mar 28, 2001 at 01:53:04PM -0600, rajesh.palani@philips.com wrote: > I am trying to use insmod on a MIPS platform. I try to install a simple module & get the following errors: > > local symbol gcc2_compiled. with index 10 exceeds local_symtab_size 10 > local symbol __gnu_compiled_c with index 11 exceeds local_symtab_size 10 This is a gas bug which somebody just fixed. As a workaround for the time until we can deploy the fix please re-link modules with a command like ld -r -o new.o broken.o. > I use the following line for generating the object file: > mipsel-linux-gcc -D__KERNEL__ -DMODULE -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -mcpu=r3000 -mlong-calls -mips1 -pipe -c That's correct. > I am using modutils version 2.3.11. We have tried both Debian and RedHat sources cross-compiled for MIPS with the following options: > CC=mipsel-linux-gcc CFLAGS="-I../linux/include -DMIPS" RANLIB=mipsel-linux-ranlib AR=mipsel-linux-ar ./configure --disable-kerneld > --disable-compat-2-0 --enable-insmod-static --target=mipsel-linux > However the problem still remains. Please upgrade to the latest modutils from ftp.kernel.org; it has a bugfixes which are important for MIPS. Ralf From owner-linux-mips@oss.sgi.com Wed Mar 28 14:57:11 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2SMvB518415 for linux-mips-outgoing; Wed, 28 Mar 2001 14:57:11 -0800 Received: from dea.waldorf-gmbh.de (u-138-18.karlsruhe.ipdial.viaginterkom.de [62.180.18.138]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2SMv6M18412 for ; Wed, 28 Mar 2001 14:57:06 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2SMugO04834; Thu, 29 Mar 2001 00:56:42 +0200 Date: Thu, 29 Mar 2001 00:56:42 +0200 From: Ralf Baechle To: Michl Ladislav Cc: Subject: Re: newport console can do set_font Message-ID: <20010329005641.A4822@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from xmichl03@stud.fee.vutbr.cz on Wed, Mar 28, 2001 at 09:18:59PM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 431 Lines: 13 On Wed, Mar 28, 2001 at 09:18:59PM +0200, Michl Ladislav wrote: > i hope this is the right place to send this. comments and corrections are > welcome. Seems like some MTA / MUA or maybe just your editor tampered with whitespace in the patch so I can no longer apply it automatically. No problem as this was a small patch but for future patches please try to ensure this doesn't happen again. Patch looks good. Thanks, Ralf From owner-linux-mips@oss.sgi.com Wed Mar 28 23:56:30 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2T7uUx26867 for linux-mips-outgoing; Wed, 28 Mar 2001 23:56:30 -0800 Received: from surfers.oz.agile.tv (agile-50.OntheNet.com.au [203.144.13.50]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2T7uOM26864 for ; Wed, 28 Mar 2001 23:56:25 -0800 Received: from agile.tv (IDENT:ldavies@tugun.oz.agile.tv [192.168.16.20]) by surfers.oz.agile.tv (8.11.0/8.11.0) with ESMTP id f2T7uOo21807; Thu, 29 Mar 2001 17:56:24 +1000 Message-ID: <3AC2EAA7.C6089289@agile.tv> Date: Thu, 29 Mar 2001 17:56:23 +1000 From: Liam Davies Reply-To: ldavies@oz.agile.tv Organization: Agile TV X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: PThread troubles with glibc-2.2.2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 4841 Lines: 134 Hi, I am having troubles with the pthread libs. I currently have installed (from Maciej's site) glibc-2.2.2-2 glibc-devel-2.2.2-2 gcc-2.95.3-14 binutils-2.10.1-3 kernel 2.4.0 When compiled with -lpthread the program just loops around doing sysmips(ATOMIC_SET...) and sched_yield. It doesn't do it if I have no -l or use some other lib such as -lm -lz. Static/ dynamic doesn't make any difference. Any help appreciated.. straces are attached Thanks Liam ------------------- #include int main (void) { int i; for(i=0;i< 10; i++){ printf("%d ", i); } return 0; } ------------ gcc -g -Wall -D_REENTRANT -o ex1 ex1.c -lpthread execve("./ex1", ["./ex1"], [/* 21 vars */]) = 0 uname({sys="Linux", node="node4.oz.agile.tv", ...}) = 0 brk(0) = 0x100000a0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaab000 open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=11630, ...}) = 0 mmap(NULL, 11630, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2aaac000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\10\0\1\0\0\0pD\376"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=120080, ...}) = 0 mmap(NULL, 367264, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x2aaaf000 mprotect(0x2aac2000, 289440, PROT_NONE) = 0 mmap(0x2ab01000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x12000) = 0x2ab01000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\10\0\1\0\0\0\244X\377"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=1647420, ...}) = 0 mmap(NULL, 1719184, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x2ab09000 mprotect(0x2ac62000, 306064, PROT_NONE) = 0 mmap(0x2aca1000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x158000) = 0x2aca1000 mmap(0x2aca9000, 15248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2aca9000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\10\0\1\0\0\0\244X\377"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=1647420, ...}) = 0 close(3) = 0 mprotect(0x2ab09000, 1413120, PROT_READ|PROT_WRITE) = 0 mprotect(0x2ab09000, 1413120, PROT_READ|PROT_EXEC) = 0 mprotect(0x2aaaf000, 77824, PROT_READ|PROT_WRITE) = 0 mprotect(0x2aaaf000, 77824, PROT_READ|PROT_EXEC) = 0 munmap(0x2aaac000, 11630) = 0 sysmips(0x7d1, 0x2aca5e38, 0x1, 0) = 4149 sched_yield(0x7ffffbf0, 0, 0x1, 0, 0x2ab10450) = 0 sysmips(0x7d1, 0x2aca5e38, 0x1, 0) = 4149 sched_yield(0x7ffffbf0, 0, 0x1, 0, 0x2ab10450) = 0 sysmips(0x7d1, 0x2aca5e38, 0x1, 0) = 4149 sched_yield(0x7ffffbf0, 0, 0x1, 0, 0x2ab10450) = 0 sysmips(0x7d1, 0x2aca5e38, 0x1, 0) = 4149 sched_yield(0x7ffffbf0, 0, 0x1, 0, 0x2ab10450) = 0 sysmips(0x7d1, 0x2aca5e38, 0x1, 0) = 4149 sched_yield(0x7ffffbf0, 0, 0x1, 0, 0x2ab10450) = 0 ... ----------------- gcc -g -Wall -D_REENTRANT -o ex1 ex1.c execve("./ex1", ["./ex1"], [/* 22 vars */]) = 0 uname({sys="Linux", node="node4.oz.agile.tv", ...}) = 0 brk(0) = 0x100000a0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaab000 open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=11630, ...}) = 0 mmap(NULL, 11630, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2aaac000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\10\0\1\0\0\0\244X\377"..., 1024) = 1024 fstat64(3, {st_mode=S_IFREG|0755, st_size=1647420, ...}) = 0 mmap(NULL, 1719184, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x2aaaf000 mprotect(0x2ac08000, 306064, PROT_NONE) = 0 mmap(0x2ac47000, 32768, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0x158000) = 0x2ac47000 mmap(0x2ac4f000, 15248, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2ac4f000 close(3) = 0 mprotect(0x2aaaf000, 1413120, PROT_READ|PROT_WRITE) = 0 mprotect(0x2aaaf000, 1413120, PROT_READ|PROT_EXEC) = 0 munmap(0x2aaac000, 11630) = 0 getpid() = 17640 fstat64(1, {st_mode=S_IFREG|0644, st_size=1296, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2aaac000 write(1, "0 1 2 3 4 5 6 7 8 9 ", 200 1 2 3 4 5 6 7 8 9 ) = 20 munmap(0x2aaac000, 4096) = 0 exit(0) = ? From owner-linux-mips@oss.sgi.com Thu Mar 29 01:12:56 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2T9CuN28544 for linux-mips-outgoing; Thu, 29 Mar 2001 01:12:56 -0800 Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2T9CtM28541 for ; Thu, 29 Mar 2001 01:12:55 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA19212; Thu, 29 Mar 2001 01:12:57 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id BAA26372; Thu, 29 Mar 2001 01:12:50 -0800 (PST) Message-ID: <000901c0b830$fed84060$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" Cc: , "Matthew Dharm" , References: <01032316143609.00779@plugh.sibyte.com> <01b801c0b3fb$1770b740$0deca8c0@Ulysses> <3ABF9683.1D08617B@mvista.com> Subject: Re: Multiple processor support? Date: Thu, 29 Mar 2001 11:16:41 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 2242 Lines: 51 > > (Software cache coherency) It is possible, > > but tricky, and at times unavoidably inefficient to build a > > software-coherent SMP system. I have not heard of anyone > > doing so with MIPS/Linux. > > > > How would it be possible? Any reference to the previous implementations? Lots of work on software coherent schemes was done in the mid-late 1980s. Check out the ASPLOS, and ISCA proceedings from the period for references. In essence, such schemes involve the identification of critical regions at risk, the use of barriers around such regions, and an explicit cache flush/purge protocol. You can think of the more common MP "TLB shootdown" protocols as being a variant of a software cache coherence scheme. > I imagine you would need at least some kind of atomic operation (like ll/sc) > working reliably (which itself may require cache coherency). MIPS ll/sc, as defined and implemented, does require hardware coherency support for correct multiprocessor operation. But one can, in principle, construct a software-coherent SMP system even in the absence of such a primitive - many of the implementations of software coherent SMPs used software coherence precisely because they were based on simple switch/crossbar interconnects where snooping was not possible. > Also, any such > scheme should not require massive change in the programming. Whether progams need to change depends on the coherency and consistency models assumed by the program. Certainly a naive multithreaded program that assumes an SGI-like model could not be dropped onto a software-coherent MP system without recompilation with specialized compilers at a minimum, and more likely not without recoding. On the other hand, if one's objective is to run multiple, independent programs on different CPUs in an SMP system, it should only be the OS that should need to change to deal with the coherence issues for shared user pages and shared kernel data structures, and to ensure that any multithreaded application that is not explicitly set up to handle software cache coherency has its threads bound to the same CPU and caches (defeats some of the point of having a multithreaded program, I know, but...). Regards, Kevin K. From owner-linux-mips@oss.sgi.com Thu Mar 29 09:28:43 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2THSha06168 for linux-mips-outgoing; Thu, 29 Mar 2001 09:28:43 -0800 Received: from hermes.research.kpn.com (hermes.research.kpn.com [139.63.192.8]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2THSgM06163 for ; Thu, 29 Mar 2001 09:28:42 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K1S3PFS8JU000NH7@research.kpn.com> for linux-mips@oss.sgi.com; Thu, 29 Mar 2001 19:28:40 +0200 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) with ESMTP id TAA01350; Thu, 29 Mar 2001 19:28:37 +0200 (MET DST) Date: Thu, 29 Mar 2001 19:28:37 +0200 From: "Houten K.H.C. van (Karel)" X-Face: ";:TzQQC{mTp~$W,'m4@Lu1Lu$rtG_~5kvYO~F:C'KExk9o1X"iRz[0%{bq?6Aj#>VhSD?v 1W9`.Qsf+P&*iQEL8&y,RDj&U.]!(R-?c-h5h%Iw%r$|%6+Jc>GTJe!_1&A0o'lC[`I#={2BzOXT1P q366I$WL=;[+SDo1RoIT+a}_y68Y:jQ^xp4=*4-ryiymi>hy Subject: Re: Recommended toolchain In-reply-to: "Your message of Tue, 27 Mar 2001 21:02:33 +0200." To: "Maciej W. Rozycki" Cc: Karel van Houten , Simon Gee , linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Reply-to: vhouten@kpn.com Message-id: <200103291728.TAA01350@sparta.research.kpn.com> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1685 Lines: 42 Hi all, "Maciej W. Rozycki" writes: > What's wrong with the toolchain wrt the kernel now? I've been compiling >2.4 kernels successfully till the end of January -- it's just a lack of >time and a nasty bug I want to track down that stop me from trying to >compile a new kernel these days. This happens when I compile kernel 2.4.0-test9 with binutils 2.10.1, gcc 2.95.3, glibc 2.2.2 on my 5000/260 (R4k) (the same source/config compiles fine with 2.8.1/egcs-2.90.27/glibc-2.0.6): # make boot .... ld -static -G 0 -T arch/mips/ld.script.little -Ttext 0x80040000 arch/mips/kernel /head.o arch/mips/kernel/init_task.o init/main.o init/version.o \ --start-group \ arch/mips/kernel/kernel.o arch/mips/mm/mm.o kernel/kernel.o mm/mm.o fs/f s.o ipc/ipc.o arch/mips/dec/dec.o \ drivers/block/block.o drivers/char/char.o drivers/misc/misc.o drivers/ne t/net.o drivers/media/media.o drivers/parport/parport.a drivers/scsi/scsidrv.o drivers/cdrom/cdrom.a drivers/tc/tc.a \ net/network.o \ arch/mips/lib/lib.a /usr/src/linux/lib/lib.a arch/mips/dec/prom/rexlib.a \ --end-group \ -o vmlinux nm vmlinux | grep -v '\(compiled\)\|\(\.o$\)\|\( [aU] \)\|\(\.\.ng$\)\|\(LASH[RL ]DI\)' | sort > System.map make[1]: Entering directory `/usr/src/linux-2.4.0t9-R4k/arch/mips/boot' ./elf2ecoff /usr/src/linux/vmlinux vmlinux.ecoff -a wrote 20 byte file header. wrote 56 byte a.out header. wrote 240 bytes of section headers. wrote 4 byte pad. writing 30560 bytes... Intersegment gap (-2147256160 bytes) too large. make[1]: *** [vmlinux.ecoff] Error 1 make[1]: Leaving directory `/usr/src/linux-2.4.0t9-R4k/arch/mips/boot' make: *** [boot] Error 2 From owner-linux-mips@oss.sgi.com Thu Mar 29 09:39:05 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2THd5O06564 for linux-mips-outgoing; Thu, 29 Mar 2001 09:39:05 -0800 Received: from hermes.research.kpn.com (hermes.research.kpn.com [139.63.192.8]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2THd4M06561 for ; Thu, 29 Mar 2001 09:39:04 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01K1S43AL8TK000OD0@research.kpn.com> for linux-mips@oss.sgi.com; Thu, 29 Mar 2001 19:39:02 +0200 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id TAA01695; Thu, 29 Mar 2001 19:39:02 +0200 (MET DST) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Thu, 29 Mar 2001 19:39:01 +0200 (MET DST) From: Karel van Houten Subject: Re: Recommended toolchain In-reply-to: <200103291728.TAA01350@sparta.research.kpn.com> To: linux-mips@oss.sgi.com Cc: macro@ds2.pg.gda.pl (Maciej W. Rozycki) Reply-to: vhouten@kpn.com Message-id: <200103291739.TAA01695@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 737 Lines: 22 I wrote: > This happens when I compile kernel 2.4.0-test9 with > binutils 2.10.1, gcc 2.95.3, glibc 2.2.2 on my 5000/260 (R4k) > (the same source/config compiles fine with 2.8.1/egcs-2.90.27/glibc-2.0.6): > .... Oh, and the resulting (ELF) kernel doesn't boot at all: >>boot 3/rz0 1/new delo V0.7 Copyright 2000 Florian Lohoff Loading /etc/delo.conf .. ok Loading /boot/vmlinux.new ....... ok KN05 V2.1k (PC: 0xa002cab8, SP: 0x8043fef0) >> -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Thu Mar 29 10:01:44 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2TI1ib07234 for linux-mips-outgoing; Thu, 29 Mar 2001 10:01:44 -0800 Received: from delta.ds2.pg.gda.pl (delta.ds2.pg.gda.pl [213.192.72.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2THuNM07111 for ; Thu, 29 Mar 2001 09:59:38 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id TAA16328; Thu, 29 Mar 2001 19:51:30 +0200 (MET DST) Date: Thu, 29 Mar 2001 19:51:29 +0200 (MET DST) From: "Maciej W. Rozycki" To: vhouten@kpn.com cc: Karel van Houten , Simon Gee , linux-mips@oss.sgi.com Subject: Re: Recommended toolchain In-Reply-To: <200103291728.TAA01350@sparta.research.kpn.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1074 Lines: 27 On Thu, 29 Mar 2001, Houten K.H.C. van (Karel) wrote: > This happens when I compile kernel 2.4.0-test9 with > binutils 2.10.1, gcc 2.95.3, glibc 2.2.2 on my 5000/260 (R4k) > (the same source/config compiles fine with 2.8.1/egcs-2.90.27/glibc-2.0.6): [...] > ./elf2ecoff /usr/src/linux/vmlinux vmlinux.ecoff -a > wrote 20 byte file header. > wrote 56 byte a.out header. > wrote 240 bytes of section headers. > wrote 4 byte pad. > writing 30560 bytes... > Intersegment gap (-2147256160 bytes) too large. > make[1]: *** [vmlinux.ecoff] Error 1 > make[1]: Leaving directory `/usr/src/linux-2.4.0t9-R4k/arch/mips/boot' > make: *** [boot] Error 2 I recall I needed to edit the ld script for linux 2.4.0-test12 that I am currently using. Just watch out which sections have improper addresses. Alternatively grab a newer version -- the script was fixed later (by Ralf, IIRC). -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Mar 29 10:22:40 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2TIMeD08271 for linux-mips-outgoing; Thu, 29 Mar 2001 10:22:40 -0800 Received: from delta.ds2.pg.gda.pl (delta.ds2.pg.gda.pl [213.192.72.1]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2TIMAM08253 for ; Thu, 29 Mar 2001 10:22:11 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id UAA16956; Thu, 29 Mar 2001 20:10:16 +0200 (MET DST) Date: Thu, 29 Mar 2001 20:10:15 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: vhouten@kpn.com cc: linux-mips@oss.sgi.com Subject: Re: Recommended toolchain In-Reply-To: <200103291739.TAA01695@sparta.research.kpn.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 1413 Lines: 32 On Thu, 29 Mar 2001, Karel van Houten wrote: > Oh, and the resulting (ELF) kernel doesn't boot at all: > >>boot 3/rz0 1/new > delo V0.7 Copyright 2000 Florian Lohoff > Loading /etc/delo.conf .. ok > Loading /boot/vmlinux.new ....... ok > > KN05 V2.1k (PC: 0xa002cab8, SP: 0x8043fef0) > >> Well, this might be related to R4k you are using. I have been able to run kernels up to 2.4.0-test12 fine on my /240. I tried the final 2.4.0 (or was it 2.4.1? -- I don't rememeber) on my machine and it booted but it was very unstable -- I got a shell prompt but any moderate fs activity killed it immediately. As it was the time I was building binutils 2.10.91 package I checked if the version of binutils matters. It didn't. The 2.4.0-test12 version was stable and the other one was not regardless of the binutils version used. So I guess there may be something wrong with the R4k code generation in gcc 2.95.2(3) (or possibly binutils, but the latter is quite unlikely). I can't run-time test R4k code but I may see if I can review the generated binary of startup code up to the first line output for any inconsistencies. Don't hold your breath, though... -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Mar 29 12:39:07 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2TKd7911063 for linux-mips-outgoing; Thu, 29 Mar 2001 12:39:07 -0800 Received: from tower.ti.com (tower.ti.com [192.94.94.5]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2TKd6M11060 for ; Thu, 29 Mar 2001 12:39:06 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by tower.ti.com (8.11.1/8.11.1) with ESMTP id f2TKd0r26234 for ; Thu, 29 Mar 2001 14:39:00 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id OAA03927 for ; Thu, 29 Mar 2001 14:39:00 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id OAA03885 for ; Thu, 29 Mar 2001 14:38:59 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.126]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id OAA19263 for ; Thu, 29 Mar 2001 14:38:58 -0600 (CST) Message-ID: <3AC39EC4.BB1E24B8@ti.com> Date: Thu, 29 Mar 2001 13:44:52 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: Tip build error Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 964 Lines: 30 I pulled the CVS tip yesterday and had problems building it for ATLAS because of the changes to the set_cp0_config arguments. Patch below to arch/mips/mm/mips32.c of how I fixed this. I think this is the intended new use? --- mips32.c.orig Thu Mar 29 13:29:29 2001 +++ mips32.c Thu Mar 29 13:34:36 2001 @@ -1051,10 +1051,11 @@ printk("CPU revision is: %08x\n", read_32bit_cp0_register(CP0_PRID)); + clear_cp0_config(CONF_CM_CMASK); #ifdef CONFIG_MIPS_UNCACHED - set_cp0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + set_cp0_config(CONF_CM_UNCACHED); #else - set_cp0_config(CONF_CM_CMASK, CONF_CM_CACHABLE_NONCOHERENT); + set_cp0_config(CONF_CM_CACHABLE_NONCOHERENT); #endif probe_icache(config); -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Fri Mar 30 17:12:34 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2V1CYY13800 for linux-mips-outgoing; Fri, 30 Mar 2001 17:12:34 -0800 Received: from dea.waldorf-gmbh.de (u-155-19.karlsruhe.ipdial.viaginterkom.de [62.180.19.155]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2V1CVM13797 for ; Fri, 30 Mar 2001 17:12:32 -0800 Received: (from ralf@localhost) by dea.waldorf-gmbh.de (8.11.1/8.11.1) id f2V1CHV18339; Sat, 31 Mar 2001 03:12:17 +0200 Date: Sat, 31 Mar 2001 03:12:17 +0200 From: Ralf Baechle To: Brady Brown Cc: SGI news group Subject: Re: Tip build error Message-ID: <20010331031217.A17423@bacchus.dhis.org> References: <3AC39EC4.BB1E24B8@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3AC39EC4.BB1E24B8@ti.com>; from bbrown@ti.com on Thu, Mar 29, 2001 at 01:44:52PM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 442 Lines: 13 On Thu, Mar 29, 2001 at 01:44:52PM -0700, Brady Brown wrote: > I pulled the CVS tip yesterday and had problems building it for ATLAS > because of the changes to the set_cp0_config arguments. Patch below to > arch/mips/mm/mips32.c of how I fixed this. I think this is the intended > new use? No, set_cp0_status only sets bits, clear_cp0_status clears bits, change_cp0_status is the old set_cp0_status function. I fixed this in CVS. Ralf From owner-linux-mips@oss.sgi.com Fri Mar 30 22:47:31 2001 Received: (from majordomo@localhost) by oss.sgi.com (8.11.3/8.11.3) id f2V6lVU18547 for linux-mips-outgoing; Fri, 30 Mar 2001 22:47:31 -0800 Received: from sioux.meginc.com (Sioux.meginc.com [207.246.76.19]) by oss.sgi.com (8.11.3/8.11.3) with ESMTP id f2V6lUM18544 for ; Fri, 30 Mar 2001 22:47:30 -0800 Received: from dell ([207.246.76.132]) by sioux.meginc.com (8.9.3/8.9.1) with SMTP id BAA70679 for ; Sat, 31 Mar 2001 01:50:03 -0500 (EST) (envelope-from bebarker@meginc.com) Content-Type: text/plain; charset="iso-8859-1" From: Brandon Barker To: linux-mips@oss.sgi.com Subject: PS2 Date: Sat, 31 Mar 2001 01:55:35 -0500 X-Mailer: KMail [version 1.2] MIME-Version: 1.0 Message-Id: <01033101553500.08484@dell> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Content-Length: 239 Lines: 5 What are the chances of Linux being ported to the PS2 (playstation 2)? I saw a Wulfstation project on Sourceforge but it seemed to be inactive; it was trying to make a port that would allow us to build clusters of PS2s. Brandon Barker .