From owner-linux-mips@oss.sgi.com Fri Dec 1 07:34:40 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 07:34:30 -0800 Received: from mail.ivm.net ([62.204.1.4]:52777 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Fri, 1 Dec 2000 07:34:05 -0800 Received: from franz.no.dom (port46.duesseldorf.ivm.de [195.247.65.46]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id QAA13814; Fri, 1 Dec 2000 16:33:46 +0100 X-To: ralf@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <001901c05b67$8c88ab60$0deca8c0@Ulysses> Date: Fri, 01 Dec 2000 16:33:48 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: "Kevin D. Kissell" Subject: Re: Indigo2 Kernel Boots!!! Cc: linux-mips@oss.sgi.com, Klaus Naumann , Jesse Dyson , Ralf Baechle Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 01-Dec-00 Kevin D. Kissell wrote: > >> > When the init process fires up, it opens /dev/console as the >> > console output device. A default SGI workstation installation >> > file system will have /dev/console bound to the major/minor device >> > node of the graphics display console. If you want to run with a serial >> > console, you must therefore change this to bind /dev/console >> > to the serial port. You can do this by doing an explicit mknod, >> > or by linking to the appropriate serial port device node, >> > which is usually /dev/ttyS0. >> >> Which both are wrong. /dev/console should be a char device major 5, minor > 1. >> There is no need to change this ever except for very old kernels. With > 2.2 >> or 2.4 whenever people change /dev/console's major/minor it's usually > painting >> over some bug. > > Having been through the exercise a dozen or more times with > the SGI 2.2 kernel distributions for the Indy, I would be fascinated > to know what bug I was painting over, and where the correct > procedure was documented. linux/Documentation/serial-console.txt -- Regards, Harald From owner-linux-mips@oss.sgi.com Fri Dec 1 09:55:10 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 09:55:01 -0800 Received: from u-207-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.207]:48905 "EHLO u-207-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 1 Dec 2000 09:54:53 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 1 Dec 2000 18:53:21 +0100 Date: Fri, 1 Dec 2000 18:53:21 +0100 From: Ralf Baechle To: Harald Koerfgen Cc: "Kevin D. Kissell" , linux-mips@oss.sgi.com, Klaus Naumann , Jesse Dyson Subject: Re: Indigo2 Kernel Boots!!! Message-ID: <20001201185321.A3211@bacchus.dhis.org> References: <001901c05b67$8c88ab60$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from Harald.Koerfgen@home.ivm.de on Fri, Dec 01, 2000 at 04:33:48PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 01, 2000 at 04:33:48PM +0100, Harald Koerfgen wrote: > > Having been through the exercise a dozen or more times with > > the SGI 2.2 kernel distributions for the Indy, I would be fascinated > > to know what bug I was painting over, and where the correct > > procedure was documented. > > linux/Documentation/serial-console.txt In addition let me add some word about what the term console actually is, this commonly seems to cause confusition because the word is used with two different meanings: 1) The device on which you login in single user mode, that's usually some kind of serial device at ttyS0 or a virtual console, that is with keyboard and some kind of text terminal. 2) The second is the device which the kernel prints all the printk messages and data sent to /dev/console to. The two often often but not always refer to the same actual device. /dev/console (as chardev 5/1) differs from another device in some important ways: - When opened by a process without controlling tty it will not become a CTTY even if the NOCTTY flag is not set. - It will never block but rather loose data. This may sound like a disadvantage but it's actually very important for proper operation. For example, if /dev/console'd block due to a serial console with hardware handshaking enabled (DON'T) syslogd writing to it may also block for an unbounded time and thus as soon as /dev/log is full all services trying to log via syslog(3) will also freeze. Syslogd actually tries to be clever about avoiding this from happening but fails to handle one case correctly, so this is a real world scenario. - It uses different routines to access the console device than normal write access to i.e. ttyS0. The most common problem is that CONFIG_SERIAL_CONSOLE wasn't configured; some drivers are simply buggy and don't properly register the console on startup. Dunno what the problem was in your case, Kevin. Ralf From owner-linux-mips@oss.sgi.com Fri Dec 1 10:16:31 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 10:16:21 -0800 Received: from [206.207.108.63] ([206.207.108.63]:12661 "HELO ridgerun-lx.ridgerun.cxm") by oss.sgi.com with SMTP id ; Fri, 1 Dec 2000 10:16:01 -0800 Received: (qmail 21981 invoked from network); 1 Dec 2000 11:15:50 -0700 Received: from gmcnutt-lx.ridgerun.cxm (HELO ridgerun.com) (gmcnutt@192.168.1.17) by ridgerun-lx.ridgerun.cxm with SMTP; 1 Dec 2000 11:15:50 -0700 Message-ID: <3A27EAD6.83E03DFB@ridgerun.com> Date: Fri, 01 Dec 2000 11:15:50 -0700 From: Gordon McNutt X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: console knowledge References: <001901c05b67$8c88ab60$0deca8c0@Ulysses> <20001201185321.A3211@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a little off-topic, so if people complain I can take it offline. But since this doesn't seem to be (very) common knowledge maybe others would like to see it, as well. Ralf Baechle wrote: > /dev/console (as chardev 5/1) differs from another device in some important > ways: > > - When opened by a process without controlling tty it will not become a > CTTY even if the NOCTTY flag is not set. What do you mean by "controlling tty"? And why is the distinction noted above important? I assume it has something to do with keyboard input/screen output, but perhaps you can clarify. Thanks, --Gordon From owner-linux-mips@oss.sgi.com Fri Dec 1 10:41:21 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 10:41:01 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:11022 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Fri, 1 Dec 2000 10:40:32 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Fri, 01 Dec 2000 13:39:42 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Fri, 1 Dec 2000 13:39:42 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209E4B@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: FW: SGI Indy R4600-133 Date: Fri, 1 Dec 2000 13:00:36 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1200182133 please respond off list with any replies. i thank the list for it's indulgence, but i have purchased another Indy with more options, and i don't need two, so i'm selling the first one i bought. it's a nice machine and boots into what ever that first screen is called after making the horn music. there is no Irix installed. I haven't gotten any software cds from ebay yet. Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Fri Dec 1 16:52:23 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 16:52:03 -0800 Received: from u-183-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.183]:57609 "EHLO u-183-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 1 Dec 2000 16:52:00 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 2 Dec 2000 01:50:41 +0100 Date: Sat, 2 Dec 2000 01:50:41 +0100 From: Ralf Baechle To: Calvine Chew Cc: 'linux-mips' Subject: Re: Xwindows/XFree86 in HardHat? Message-ID: <20001202015041.E3211@bacchus.dhis.org> References: <43FECA7CDC4CD411A4A3009027999112267CB3@sgp-apsa001e--n.singapore.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <43FECA7CDC4CD411A4A3009027999112267CB3@sgp-apsa001e--n.singapore.sgi.com>; from calvine@sgi.com on Fri, Dec 01, 2000 at 02:54:19PM +0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 01, 2000 at 02:54:19PM +0800, Calvine Chew wrote: > Does HardHat include some form of Xwindows? Yes; it's X clients plus the virtual servers Xvfb and Xnest. > There are some xwindows files in the distribution, but I can't fire up > xwindows (some files seem to be missing). I did notice that HardHat > included only one XF86 server (XF68_FBDev) but if I used that, startx > reports a X11TransSocketUNIXConnect errno 146. The framebuffer server is only used for certain simple framebuffer hardware. Which the Indy doesn't have. > Do I need to install the latest XFree86 distribution (4.0.1), or is there > some other things I can fiddle with in the config files? Checkout the archives of this list at http://oss.sgi.com/projects/linux-mips/archive/, there should be a pointer to the necessary patches for XFree 4. Ralf From owner-linux-mips@oss.sgi.com Fri Dec 1 17:54:13 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 17:54:04 -0800 Received: from u-183-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.183]:59145 "EHLO u-183-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 1 Dec 2000 17:53:43 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 2 Dec 2000 02:53:17 +0100 Date: Sat, 2 Dec 2000 02:53:17 +0100 From: Ralf Baechle To: Gordon McNutt Cc: linux-mips@oss.sgi.com Subject: Re: console knowledge Message-ID: <20001202025317.A4718@bacchus.dhis.org> References: <001901c05b67$8c88ab60$0deca8c0@Ulysses> <20001201185321.A3211@bacchus.dhis.org> <3A27EAD6.83E03DFB@ridgerun.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A27EAD6.83E03DFB@ridgerun.com>; from gmcnutt@ridgerun.com on Fri, Dec 01, 2000 at 11:15:50AM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 01, 2000 at 11:15:50AM -0700, Gordon McNutt wrote: > > /dev/console (as chardev 5/1) differs from another device in some important > > ways: > > > > - When opened by a process without controlling tty it will not become a > > CTTY even if the NOCTTY flag is not set. > > What do you mean by "controlling tty"? > output, but perhaps you can clarify. Controlling terminal is a fundamental UNIX term; you should check a good UNIX book about it. The glibc info pages also have some words about it. > And why is the distinction noted above important? I assume it has something > to do with keyboard input/screen Reread my posting, it describes some of the differences in the behaviour of for example /dev/console and /dev/ttyS0 even though both refer to the same device. That could be different. The classic UNIX setup is sending /dev/console to the printer on one serial and having the system's console terminal on another. Any arbitrary device combination would be possible. Ralf From owner-linux-mips@oss.sgi.com Fri Dec 1 20:04:04 2000 Received: by oss.sgi.com id ; Fri, 1 Dec 2000 20:03:44 -0800 Received: from u-183-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.183]:64009 "EHLO u-183-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 1 Dec 2000 20:03:22 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 2 Dec 2000 05:03:06 +0100 Date: Sat, 2 Dec 2000 05:03:06 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Support for smaller glibc Message-ID: <20001202050306.A12319@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing For the information of the embedded community. Ralf ----- Forwarded message from "H . J . Lu" ----- Date: Fri, 1 Dec 2000 09:12:35 -0800 From: "H . J . Lu" To: Ralf Baechle Cc: sglibc@external-lists.valinux.com Subject: Re: Support for smaller glibc On Fri, Dec 01, 2000 at 02:14:14PM +0100, Ralf Baechle wrote: > On Tue, Nov 28, 2000 at 04:24:29PM -0800, H . J . Lu wrote: > > > The current glibc 2.2 has many features. But some of them are not > > needed in some cases. I am wondering if there is an interest to > > make those features configurabled at the build time. The ones I am > > thinging now are intl, iconv, iconvdata, locale, localedata, wcsmbs, > > wctype and wide char IO. They will be enabled by default. But you > > can disable them at the build time. It will make glibc much smaller. > > Any comments? > > The MIPS community is shifting more and more into the embedded area; one > of the increasing pains is glibc's increasing size which makes various > people continue to maintain glibc 2.0, the oldest and smallest libc for > MIPS. So your suggestion is very interesting indeed. > > I just have acknowledge Uli's concerns in this thread; they need to be > solved. But forking a smaller libc of standard glibc is nothing but the > St. Florian's principle ... > Ulrich is refusing to do anything with it. Do you have any suggestions? I will do my best to do it right. But I am afraid I cannot do it alone. BTW, please discuss it on sglibc@external-lists.valinux.com. -- H.J. Lu (hjl@valinux.com) ----- End forwarded message ----- Ralf From owner-linux-mips@oss.sgi.com Sat Dec 2 02:35:07 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 02:34:57 -0800 Received: from adsl-61-8-131.mia.bellsouth.net ([208.61.8.131]:44805 "EHLO spawn.hockeyfiend.com") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 02:34:36 -0800 Received: from localhost ([127.0.0.1] ident=chris) by spawn.hockeyfiend.com with esmtp (Exim 3.16 #1 (Debian)) id 1429zm-0006lr-00; Sat, 02 Dec 2000 05:34:18 -0500 Date: Sat, 2 Dec 2000 05:34:13 -0500 (EST) From: "Christopher C. Chimelis" X-Sender: chris@spawn.hockeyfiend.com To: Jamie Fifield cc: linux-mips@oss.sgi.com Subject: Re: cross-compile tools made easy ... In-Reply-To: <00Nov29.094316ast.7303@dragon.appliedmicro.ns.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 29 Nov 2000, Jamie Fifield wrote: > Chris: Any chance I could persuade you to upload a binutils-mips to Woody? :) Ok, I have returned and am considering :-) What's the state of the toolchain on big-endian MIPS lately? My indy has been relegated to other tasks and I've been unable to boot to Linux because of it :-( Are any patches needed against my 2.10.1.0.2-1 package for it to work properly as a native assembler? (in other words, are those branch errors still popping up while bootstrapping gcc?). There are STILl a ton of MIPS-related changes going into binutils CVS, so I'm hesitant to enable it until the submitter(s) slow down a bit. Would an experimental package due that targets only mips and mipsel as cross targets in the meantime? C From owner-linux-mips@oss.sgi.com Sat Dec 2 04:21:08 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 04:20:58 -0800 Received: from web1.lanscape.net ([64.240.156.194]:38155 "EHLO web1.lanscape.net") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 04:20:39 -0800 Received: from sumpf.cyrius.com (IDENT:root@web1.lanscape.net [64.240.156.194]) by web1.lanscape.net (8.9.3/8.9.3) with ESMTP id GAA29579; Sat, 2 Dec 2000 06:20:27 -0600 Received: by sumpf.cyrius.com (Postfix, from userid 1000) id 0F0D415086; Sat, 2 Dec 2000 12:25:20 +0000 (GMT) Date: Sat, 2 Dec 2000 12:25:20 +0000 From: Martin Michlmayr To: Ralf Baechle Cc: linux-mips@oss.sgi.com Subject: Re: Support for smaller glibc Message-ID: <20001202122520.A815@sumpf.cyrius.com> References: <20001202050306.A12319@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001202050306.A12319@bacchus.dhis.org>; from ralf@oss.sgi.com on Sat, Dec 02, 2000 at 05:03:06AM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing * Ralf Baechle [20001202 05:03]: > For the information of the embedded community. > >> BTW, please discuss it on sglibc@external-lists.valinux.com. See http://external-lists.valinux.com/lists/listinfo/sglibc/ -- Martin Michlmayr tbm@cyrius.com From owner-linux-mips@oss.sgi.com Sat Dec 2 04:29:58 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 04:29:38 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:61962 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sat, 2 Dec 2000 04:29:26 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 4C4F2805; Sat, 2 Dec 2000 13:29:20 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id A036A8F74; Sat, 2 Dec 2000 13:28:41 +0100 (CET) Date: Sat, 2 Dec 2000 13:28:41 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: [PATCH] compile fix for mm/r4xx0.c Message-ID: <20001202132841.B2002@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Comments ? Index: r4xx0.c =================================================================== RCS file: /cvs/linux/arch/mips/mm/r4xx0.c,v retrieving revision 1.45 diff -u -r1.45 arch/mips/mm/r4xx0.c --- arch/mips/mm/r4xx0.c 2000/11/29 22:00:30 1.45 +++ arch/mips/mm/r4xx0.c 2000/12/02 12:21:06 @@ -1967,16 +1967,17 @@ if (!(vma->vm_flags & VM_EXEC)) return; - blast_icache16_page(address); + blast_icache16_page((unsigned long)page_address(page)); } static void r4k_flush_icache_page_i32(struct vm_area_struct *vma, struct page *page) { + int address; if (!(vma->vm_flags & VM_EXEC)) return; - address = KSEG0 + (address & PAGE_MASK & (dcache_size - 1)); + address = KSEG0 + ((unsigned long)page_address(page) & PAGE_MASK & (dcache_size - 1)); blast_icache32_page_indexed(address); } -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sat Dec 2 04:29:58 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 04:29:38 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:61706 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sat, 2 Dec 2000 04:29:28 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 2B2E8804; Sat, 2 Dec 2000 13:29:20 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 765118F74; Sat, 2 Dec 2000 13:27:48 +0100 (CET) Date: Sat, 2 Dec 2000 13:27:48 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: [PATCH] DEC init_cycle_counter Message-ID: <20001202132748.A2002@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Comments ? Index: time.c =================================================================== RCS file: /cvs/linux/arch/mips/dec/time.c,v retrieving revision 1.11 diff -u -r1.11 arch/mips/dec/time.c --- arch/mips/dec/time.c 2000/11/23 02:00:49 1.11 +++ arch/mips/dec/time.c 2000/12/02 12:20:09 @@ -423,46 +423,6 @@ timer_interrupt(irq, dev_id, regs); } -char cyclecounter_available; - -static inline void init_cycle_counter(void) -{ - switch (mips_cputype) { - case CPU_UNKNOWN: - case CPU_R2000: - case CPU_R3000: - case CPU_R3000A: - case CPU_R3041: - case CPU_R3051: - case CPU_R3052: - case CPU_R3081: - case CPU_R3081E: - case CPU_R6000: - case CPU_R6000A: - case CPU_R8000: /* Not shure about that one, play safe */ - cyclecounter_available = 0; - break; - case CPU_R4000PC: - case CPU_R4000SC: - case CPU_R4000MC: - case CPU_R4200: - case CPU_R4400PC: - case CPU_R4400SC: - case CPU_R4400MC: - case CPU_R4600: - case CPU_R10000: - case CPU_R4300: - case CPU_R4650: - case CPU_R4700: - case CPU_R5000: - case CPU_R5000A: - case CPU_R4640: - case CPU_NEVADA: - cyclecounter_available = 1; - break; - } -} - struct irqaction irq0 = {timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL}; @@ -513,8 +473,6 @@ xtime.tv_sec = mktime(year, mon, day, hour, min, sec); xtime.tv_usec = 0; write_unlock_irq(&xtime_lock); - - init_cycle_counter(); if (cyclecounter_available) { write_32bit_cp0_register(CP0_COUNT, 0); -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sat Dec 2 05:03:30 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 05:03:21 -0800 Received: from orzan.fi.udc.es ([193.144.60.19]:54912 "EHLO orzan.fi.udc.es") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 05:02:57 -0800 Received: from serpe.mitica (mail@vexeta.dc.fi.udc.es [193.144.51.32]) by orzan.fi.udc.es (8.9.3/8.9.1) with ESMTP id OAA18783; Sat, 2 Dec 2000 14:02:52 +0100 (MET) Received: from quintela by serpe.mitica with local (Exim 3.16 #1 (Debian)) id 142CJX-0001jV-00; Sat, 02 Dec 2000 14:02:51 +0100 To: Florian Lohoff Cc: linux-mips@oss.sgi.com Subject: Re: [PATCH] DEC init_cycle_counter References: <20001202132748.A2002@paradigm.rfc822.org> X-Url: http://carpanta.dc.fi.udc.es/~quintela From: "Juan J. Quintela" In-Reply-To: Florian Lohoff's message of "Sat, 2 Dec 2000 13:27:48 +0100" Date: 02 Dec 2000 14:02:51 +0100 Message-ID: Lines: 23 User-Agent: Gnus/5.0807 (Gnus v5.8.7) Emacs/20.7 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> "florian" == Florian Lohoff writes: florian> Comments ? [snip] florian> -char cyclecounter_available; florian> - [snip] florian> if (cyclecounter_available) { florian> write_32bit_cp0_register(CP0_COUNT, 0); You delete the definition of cyclecounter_available and you mantain one of its uses ..... that is a no-no, I will bet that with that patch, this don't compile (and less it works .....). Later, Juan. -- In theory, practice and theory are the same, but in practice they are different -- Larry McVoy From owner-linux-mips@oss.sgi.com Sat Dec 2 05:06:40 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 05:06:31 -0800 Received: from lightning.swansea.linux.org.uk ([194.168.151.1]:3453 "EHLO the-village.bc.nu") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 05:06:16 -0800 Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 142CN5-0001Wk-00; Sat, 2 Dec 2000 13:06:31 +0000 Subject: Re: Support for smaller glibc To: ralf@oss.sgi.com (Ralf Baechle) Date: Sat, 2 Dec 2000 13:06:28 +0000 (GMT) Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr In-Reply-To: <20001202050306.A12319@bacchus.dhis.org> from "Ralf Baechle" at Dec 02, 2000 05:03:06 AM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > solved. But forking a smaller libc of standard glibc is nothing but the > > St. Florian's principle ... > > Ulrich is refusing to do anything with it. Do you have any suggestions? > I will do my best to do it right. But I am afraid I cannot do it alone. Ulrich is right. Start from a library that is intended to be modular and embedded. Folks are already looking at using newlib for this. Alan From owner-linux-mips@oss.sgi.com Sat Dec 2 05:15:01 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 05:14:43 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:38411 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sat, 2 Dec 2000 05:14:31 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 736DF804; Sat, 2 Dec 2000 14:14:26 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 8E5E78F74; Sat, 2 Dec 2000 14:14:05 +0100 (CET) Date: Sat, 2 Dec 2000 14:14:05 +0100 From: Florian Lohoff To: "Juan J. Quintela" Cc: linux-mips@oss.sgi.com Subject: Re: [PATCH] DEC init_cycle_counter Message-ID: <20001202141405.A2442@paradigm.rfc822.org> References: <20001202132748.A2002@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from quintela@fi.udc.es on Sat, Dec 02, 2000 at 02:02:51PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Dec 02, 2000 at 02:02:51PM +0100, Juan J. Quintela wrote: > You delete the definition of cyclecounter_available and you mantain > one of its uses ..... that is a no-no, I will bet that with that > patch, this don't compile (and less it works .....). > It actually compiles but i cant test due to the TLB and swapping stuff. This whole cyle_counter stuff has moved to the generic mips time.c in arch/mips/kernel/time.c and seemed to be a complete code duplication. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sat Dec 2 05:24:31 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 05:24:22 -0800 Received: from mx.mips.com ([206.31.31.226]:32159 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 05:24:05 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id FAA24254; Sat, 2 Dec 2000 05:23:59 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id FAA10228; Sat, 2 Dec 2000 05:23:56 -0800 (PST) Message-ID: <007f01c05c63$9b517b20$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Florian Lohoff" , References: <20001202132748.A2002@paradigm.rfc822.org> Subject: Re: [PATCH] DEC init_cycle_counter Date: Sat, 2 Dec 2000 14:26:54 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Only that if you adopted the CPU probe and configuration scheme that we've been promulgating at MIPS, it would already have been taken care of in kernel/cpu_probe.c, and could be tested as (mips_cpu.options & MIPS_CPU_COUNTER). I believe I even checked in the headers and C file in the 2.2 repository, though I don't think I "wired it up" to replace the old assembler spaghetti. Kevin K. ----- Original Message ----- From: "Florian Lohoff" To: Sent: Saturday, December 02, 2000 1:27 PM Subject: [PATCH] DEC init_cycle_counter > > Comments ? > > Index: time.c > =================================================================== > RCS file: /cvs/linux/arch/mips/dec/time.c,v > retrieving revision 1.11 > diff -u -r1.11 arch/mips/dec/time.c > --- arch/mips/dec/time.c 2000/11/23 02:00:49 1.11 > +++ arch/mips/dec/time.c 2000/12/02 12:20:09 > @@ -423,46 +423,6 @@ > timer_interrupt(irq, dev_id, regs); > } > > -char cyclecounter_available; > - > -static inline void init_cycle_counter(void) > -{ > - switch (mips_cputype) { > - case CPU_UNKNOWN: > - case CPU_R2000: > - case CPU_R3000: > - case CPU_R3000A: > - case CPU_R3041: > - case CPU_R3051: > - case CPU_R3052: > - case CPU_R3081: > - case CPU_R3081E: > - case CPU_R6000: > - case CPU_R6000A: > - case CPU_R8000: /* Not shure about that one, play safe */ > - cyclecounter_available = 0; > - break; > - case CPU_R4000PC: > - case CPU_R4000SC: > - case CPU_R4000MC: > - case CPU_R4200: > - case CPU_R4400PC: > - case CPU_R4400SC: > - case CPU_R4400MC: > - case CPU_R4600: > - case CPU_R10000: > - case CPU_R4300: > - case CPU_R4650: > - case CPU_R4700: > - case CPU_R5000: > - case CPU_R5000A: > - case CPU_R4640: > - case CPU_NEVADA: > - cyclecounter_available = 1; > - break; > - } > -} > - > struct irqaction irq0 = {timer_interrupt, SA_INTERRUPT, 0, > "timer", NULL, NULL}; > > @@ -513,8 +473,6 @@ > xtime.tv_sec = mktime(year, mon, day, hour, min, sec); > xtime.tv_usec = 0; > write_unlock_irq(&xtime_lock); > - > - init_cycle_counter(); > > if (cyclecounter_available) { > write_32bit_cp0_register(CP0_COUNT, 0); > > > -- > Florian Lohoff flo@rfc822.org +49-5201-669912 > Why is it called "common sense" when nobody seems to have any? > From owner-linux-mips@oss.sgi.com Sat Dec 2 05:28:12 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 05:28:02 -0800 Received: from u-240-21.karlsruhe.ipdial.viaginterkom.de ([62.180.21.240]:15626 "EHLO u-240-21.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 05:27:48 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 2 Dec 2000 14:27:34 +0100 Date: Sat, 2 Dec 2000 14:27:34 +0100 From: Ralf Baechle To: Florian Lohoff Cc: linux-mips@oss.sgi.com Subject: Re: [PATCH] DEC init_cycle_counter Message-ID: <20001202142734.B30939@bacchus.dhis.org> References: <20001202132748.A2002@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001202132748.A2002@paradigm.rfc822.org>; from flo@rfc822.org on Sat, Dec 02, 2000 at 01:27:48PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Dec 02, 2000 at 01:27:48PM +0100, Florian Lohoff wrote: > Comments ? I got a better an more complete from MIPS in the patch queue. Ralf From owner-linux-mips@oss.sgi.com Sat Dec 2 08:14:22 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 08:14:11 -0800 Received: from mail.xmission.com ([198.60.22.22]:18948 "EHLO mail.xmission.com") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 08:13:53 -0800 Received: from xmission.xmission.com ([198.60.22.20]) by mail.xmission.com with esmtp (Exim 3.12 #1) id 142FII-0003TX-00; Sat, 02 Dec 2000 09:13:46 -0700 Received: from alhaz by xmission.xmission.com with local (Exim 2.12 #1) id 142FIH-00017w-00; Sat, 2 Dec 2000 09:13:45 -0700 Subject: Re: Support for smaller glibc To: alan@lxorguk.ukuu.org.uk (Alan Cox) Date: Sat, 2 Dec 2000 09:13:45 -0700 (MST) Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr In-Reply-To: from "Alan Cox" at Dec 02, 2000 01:06:28 PM X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Eric Jorgensen Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > > > solved. But forking a smaller libc of standard glibc is nothing but the > > > St. Florian's principle ... > > > > Ulrich is refusing to do anything with it. Do you have any suggestions? > > I will do my best to do it right. But I am afraid I cannot do it alone. > > Ulrich is right. Start from a library that is intended to be modular and > embedded. Folks are already looking at using newlib for this. There are a few other methods. Lineo for instance has a utility called Lipo which goes through all the binaries on a system and then strips out all the library code that's unused, usually resulting in a substantial reduction in the size of libc6. Lipo is a proprietary app tho, currently only available supporting ia32 and ppc archetectures as part of the Embedix SDK. There's also uClibc, and i've heard some talk of using bsd's libc, which i understand is also smaller. These may require modification to the sourcecode of your apps to work properly. - Eric From owner-linux-mips@oss.sgi.com Sat Dec 2 08:32:12 2000 Received: by oss.sgi.com id ; Sat, 2 Dec 2000 08:32:02 -0800 Received: from lightning.swansea.linux.org.uk ([194.168.151.1]:10762 "EHLO the-village.bc.nu") by oss.sgi.com with ESMTP id ; Sat, 2 Dec 2000 08:31:48 -0800 Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 142FZs-0001he-00; Sat, 2 Dec 2000 16:31:56 +0000 Subject: Re: Support for smaller glibc To: alhaz@xmission.com (Eric Jorgensen) Date: Sat, 2 Dec 2000 16:31:53 +0000 (GMT) Cc: alan@lxorguk.ukuu.org.uk (Alan Cox), linux-mips@oss.sgi.com, linux-mips@fnet.fr In-Reply-To: from "Eric Jorgensen" at Dec 02, 2000 09:13:45 AM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > There are a few other methods. Lineo for instance has a utility > called Lipo which goes through all the binaries on a system and then Try it on a real application and with glibc 2.2 at least its far from large. glibc isnt designed to be modular. > substantial reduction in the size of libc6. Lipo is a proprietary > app tho, currently only available supporting ia32 and ppc archetectures as > part of the Embedix SDK. Lipo is an afternoons work to do with libbfd so thats a path that is easy to pursue. ( > There's also uClibc, and i've heard some talk of using bsd's libc, > which i understand is also smaller. These may require modification to the > sourcecode of your apps to work properly. BSD libc is smaller, uClibc is pretty ropey and not very modular. Both the BSD libc and newlib are modular. Newlib for mips32 without mips16 support including FPU emulation with every option on is about 350K From owner-linux-mips@oss.sgi.com Sun Dec 3 04:22:28 2000 Received: by oss.sgi.com id ; Sun, 3 Dec 2000 04:22:18 -0800 Received: from u-162-19.karlsruhe.ipdial.viaginterkom.de ([62.180.19.162]:27147 "EHLO u-162-19.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 3 Dec 2000 04:21:54 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sun, 3 Dec 2000 13:21:33 +0100 Date: Sun, 3 Dec 2000 13:21:33 +0100 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: Ulrich Drepper , "H . J . Lu" , Nick Clifton , binutils@sources.redhat.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Update readelf to know about the new ELF constants Message-ID: <20001203132132.B21272@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Wed, Nov 29, 2000 at 01:10:58PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 29, 2000 at 01:10:58PM +0100, Maciej W. Rozycki wrote: > Well, I would only add the name should probably be EM_MIPS_R3_LE (and > ditto the comment). We might actually use it for mipsel-linux especially > as the ABI explicitly states EM_MIPS is for big endian machines but I'm > not sure it's worth bothering as the endianness is specified > independently. The entire ABI only covers big endianess, so you can't directly make conclusions for little endian boxes based. So whatever a little endian system ``ABI compliant'' system does it's only based on an effort to stick as closely as possible to the ABI. > I believe all software involved should handle it well -- I recall Linux, > glibc, binutils, modutils all handle both tags fine. It's just BFD that > does not generate EM_MIPS_R3_LE. Ralf From owner-linux-mips@oss.sgi.com Sun Dec 3 08:05:19 2000 Received: by oss.sgi.com id ; Sun, 3 Dec 2000 08:05:09 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:49668 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 3 Dec 2000 08:04:49 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 1A5647F3; Sun, 3 Dec 2000 17:04:47 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id A84458F74; Sun, 3 Dec 2000 17:04:30 +0100 (CET) Date: Sun, 3 Dec 2000 17:04:30 +0100 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: [SUCCESS] 2.4.0-test11 on Decstation 5000/150 (R4000) Message-ID: <20001203170430.A1504@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, here is the short output - We needed to change ethernet, scsi initialization and the vmalloc bug ... --------------------------------schnipp------------------------------ KN04 V2.1k (PC: 0x8005faf4, SP: 0x839bfde8) delo V0.7 Copyright 2000 Florian Lohoff Loading /etc/delo.conf .. ok Loading /boot/vmlinux .................... ok This DECstation is a DS5000/1xx Loading R4000 MMU routines. CPU revision is: 00000430 Primary instruction cache 8kb, linesize 16 bytes. Primary data cache 8kb, linesize 16 bytes. Secondary cache sized at 1024K linesize 32 bytes. Linux version 2.4.0-test11 (flo@slimer.rfc822.org) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #15 Sun Dec 3 16:27:18 CET 2000 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda2 console=ttyS2 Calibrating delay loop... 49.68 BogoMIPS Memory: 62596k/65536k available (1277k kernel code, 2940k reserved, 69k data, 56k init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX TURBOchannel rev. 1 at 12.5 MHz (no parity) slot 0: DEC PMAZ-AA V5.3d slot 1: DEC PMAZ-AA V5.3b slot 2: DEC PMAF-FA V1.1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 pty: 256 Unix98 ptys configured DECstation Z8530 serial driver version 0.03 ttyS00 at 0xbc100001 (irq = 4) is a Z85C30 SCC ttyS01 at 0xbc100009 (irq = 4) is a Z85C30 SCC ttyS02 at 0xbc180001 (irq = 4) is a Z85C30 SCC ttyS03 at 0xbc180009 (irq = 4) is a Z85C30 SCC rtc: Digital DECstation epoch (2000) detected Real Time Clock Driver v1.10e declance.c: v0.008 by Linux Mips DECstation task force eth0: IOASIC onboard LANCE, addr = 08:00:2b:28:f0:a3, irq = 3 SCSI subsystem driver Revision: 1.00 SCSI ID 7 Clk 25MHz CCF=5 TOut 167 NCR53C9x(esp236) SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236) SCSI ID 7 Clk 12MHz CCF=3 TOut 139 NCR53C9x(esp236) ESP: Total of 3 ESP hosts found, 3 actually in use. scsi0 : ESP236 (NCR53C9x) scsi1 : ESP236 (NCR53C9x) scsi2 : ESP236 (NCR53C9x) Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Detected scsi disk sdc at scsi0, channel 0, id 2, lun 0 Detected scsi disk sdd at scsi0, channel 0, id 3, lun 0 Detected scsi disk sde at scsi0, channel 0, id 4, lun 0 Detected scsi disk sdf at scsi0, channel 0, id 5, lun 0 Detected scsi disk sdg at scsi0, channel 0, id 6, lun 0 esp0: target 0 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sda: 4124736 512-byte hdwr sectors (2112 MB) Partition check: sda: sda1 sda2 esp0: target 1 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sdb: 8386733 512-byte hdwr sectors (4294 MB) sdb: sdb1 esp0: target 2 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sdc: 8386733 512-byte hdwr sectors (4294 MB) sdc: sdc1 esp0: target 3 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sdd: 8386733 512-byte hdwr sectors (4294 MB) sdd: sdd1 esp0: target 4 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sde: 8386733 512-byte hdwr sectors (4294 MB) sde: sde1 esp0: target 5 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sdf: 8386733 512-byte hdwr sectors (4294 MB) sdf: sdf1 esp0: target 6 [period 200ns offset 15 5.00MHz synchronous SCSI] SCSI device sdg: 8386733 512-byte hdwr sectors (4294 MB) sdg: sdg1 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) Sending BOOTP requests.... OK IP-Config: Got BOOTP answer from 195.71.97.226, my address is 195.71.97.229 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kmem_create: Forcing size word alignment - nfs_fh VFS: Mounted root (ext2 filesystem) readonly. Freeing unused PROM memory: 124k freed Freeing unused kernel memory: 56k freed INIT: version 2.78 booting Activating swap... Adding Swap: 130748k swap-space (priority -1) Checking root file system... Parallelizing fsck version 1.19 (13-Jul-2000) /dev/sda2: clean, 51555/483328 files, 786244/1927296 blocks Checking all file systems... Parallelizing fsck version 1.19 (13-Jul-2000) /dev/sdc1: clean, 4311/524288 files, 164329/1048265 blocks /dev/sdd1: clean, 62204/524288 files, 379848/1048316 blocks Setting kernel variables. Mounting local filesystems... /dev/sdc1 on /ftp.rfc822.org type ext2 (rw) /dev/sdd1 on /home type ext2 (rw) shm on /var/shm type shm (rw) Starting portmap daemon: portmap. Setting the System Clock using the Hardware Clock as reference... System Clock set. Local time: Sun Dec 3 16:34:18 MET 2000 Cleaning: /tmp /var/lock /var/run. Initializing random number generator... done. INIT: Entering runlevel: 2 Starting system log daemon: syslogd klogd. Starting internet superserver: inetd. Starting kernel module cleaner: modclean. postfix-script: starting the Postfix mail system Starting OpenBSD Secure Shell server: sshd. Running ntpdate to synchronize clock. Starting NTP server: ntpd. Starting periodic command scheduler: cron. Debian GNU/Linux woody repeat.rfc822.org console repeat.rfc822.org login: --------------------------------schnapp------------------------------ So long ... -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Dec 4 07:33:38 2000 Received: by oss.sgi.com id ; Mon, 4 Dec 2000 07:33:28 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:16237 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 4 Dec 2000 07:33:16 -0800 Received: from relay.istanbul.sgi.com (relay.istanbul.sgi.com [144.253.232.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA10800 for ; Mon, 4 Dec 2000 07:33:14 -0800 (PST) mail_from (Huseyin@sgi.com) Received: from nt-emea-trbdc.istanbul.sgi.com (nt-emea-trbdc.istanbul.sgi.com [144.253.232.21]) by relay.istanbul.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id RAA22999 for ; Mon, 4 Dec 2000 17:30:26 +0200 (MET) Received: by nt-emea-trbdc.istanbul.sgi.com with Internet Mail Service (5.5.2650.21) id ; Mon, 4 Dec 2000 17:31:34 +0200 Message-ID: <801EE44EFDA5D411AFA90090278610F3019D89@nt-emea-trbdc.istanbul.sgi.com> From: Huseyin Sasmaz To: linux-mips@oss.sgi.com Subject: Remove from list Date: Mon, 4 Dec 2000 17:31:28 +0200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/mixed; boundary="----_=_NextPart_000_01C05E07.48578090" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01C05E07.48578090 Content-Type: text/plain; charset="iso-8859-9" Does anyone know how I can get my name off this list? > NB: INFORMATION IN THIS MESSAGE IS SGI CONFIDENTIAL. IT IS > INTENDED SOLELY FOR THE PERSON(S) TO WHOM IT IS ADDRESSED AND MAY NOT BE > COPIED, USED, DISCLOSED OR DISTRIBUTED TO OTHERS WITHOUT SGI CONSENT. IF > YOU ARE NOT THE INTENDED RECIPIENT PLEASE WILL YOU NOTIFY ME BY EMAIL OR > TELEPHONE, DELETE THE MESSAGE FROM YOUR SYSTEM IMMEDIATELY AND DESTROY ANY > PRINTED COPIES. > > <> ------_=_NextPart_000_01C05E07.48578090 Content-Type: application/octet-stream; name="Huseyin Sasmaz.vcf" Content-Disposition: attachment; filename="Huseyin Sasmaz.vcf" BEGIN:VCARD VERSION:2.1 N:Sasmaz;Huseyin FN:Huseyin Sasmaz ORG:SGI NOTE:CS Manager, Turkey, Istanbul ADR;WORK:;Istanbul;;;;;Turkey LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Istanbul=0D=0ATurkey EMAIL;PREF;INTERNET:Huseyin@sgi.com REV:20001109T090722Z END:VCARD ------_=_NextPart_000_01C05E07.48578090-- From owner-linux-mips@oss.sgi.com Mon Dec 4 07:43:09 2000 Received: by oss.sgi.com id ; Mon, 4 Dec 2000 07:42:58 -0800 Received: from cx112852-c.okc1.ok.home.com ([24.6.27.68]:4083 "HELO tekcgi.com") by oss.sgi.com with SMTP id ; Mon, 4 Dec 2000 07:42:34 -0800 Received: by tekcgi.com (Postfix, from userid 1000) id 5527894901; Mon, 4 Dec 2000 09:42:31 -0600 (CST) Date: Mon, 4 Dec 2000 09:42:31 -0600 To: linux-mips@oss.sgi.com Subject: egcs 1.1.2 build with 1.0.2 Message-ID: <20001204094231.A6622@milliways.cx> Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="DocE+STaALJfprDB" Content-Disposition: inline User-Agent: Mutt/1.2.5i From: mike@milliways.cx (Mike Mattice) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --DocE+STaALJfprDB Content-Type: text/plain; charset=us-ascii Content-Disposition: inline I'm trying to build this on a cobalt. Quick and dirty summary: /tmp/ccl2C8g8.s: Assembler messages: /tmp/ccl2C8g8.s:182: Internal error! Assertion failure in mips_emit_delays at ./config/tc-mips.c line 2231. Please report this bug. gcc -v reports: Reading specs from /usr/lib/gcc-lib/mipsel-redhat-linux/egcs-2.90.27/specs gcc version egcs-2.90.27 980315 (egcs-1.0.2 release) Typescript of build attached. -- Mike Mattice - Debian Developer mailto: mike@milliways.cx mattice@debian.org 1024D/137A955E print 050C 2D2F A95A 25BB B61F CD16 EC3B CAC4 137A 955E --DocE+STaALJfprDB Content-Type: application/octet-stream Content-Disposition: attachment; filename="typescript.gz" Content-Transfer-Encoding: base64 H4sICH4eKzoAA3R5cGVzY3JpcHQA7D39cxNHsr9eqOJ/mLio+CCsZJmEELvMlbAFuJ6xKctc eBVz8mo1kha023u7KyPnuPe3v+n53tWHV9IAjgOVyDtfPT0z3T3dPV/tIA2TnGS5n+a0RyAm 7XFMDmhAyCOy3dhpPNrZapDtra2tO0HgB0O68391OgiyeyToERr8jfyNBbxGrVHbrt+9Y+fg PyLlHon8D/TuHfz9vfFuh7TinKZhPCC9MKVBDukVuagPIaL1KPxAy8Xro7AbdmmaX23evRP2 ye9kshHDBtkjkyuakXfkhx9Y3PfE65EkDMi7XZIPaUzO794hJPrAqsDoXQzTUUZJno7pLumH d+/kMA6G2PYo8VgWlvPunf2T4+eHLzrPD49a7T0iQy9bzYPWaXsvgLgfDmrDHfkRxqTeDeN6 NiS1uoxj4PJxxvoipX6ObVSFWH00yyXu30vkP30SeA6CgHjsv4OXzX+2Oqpa4g2Id7JNvMMa /l+v1ephHIzGPUoI8dPBZY0VAWxenYfg7p3lAQk4rrELhgAZ9XIaJQZJO3IlXAtQnaMMceDn FrYivBqiEpZzHJPROPN6NLLQ1FGrYWoguka234v8PBgaVFXESohqaM7RjMtoxuugGX8mNAc0 h8QiTxleCUkF6/Pg2Cgj2VgHy8ZnQTMdx3kY0QKmKm5VZDVM1/gO6cQgioGVMORQnDPPCPy8 D2lkS047cjUmsqG6Rhm67/3RCAKDr45ZCVkDzz2mTJsIPtiIiogV8ZTQXKOZ0AkNxrnFTDpm JUQNPNeYZokf0MzgKcMrYalgOccxT2maQmphqWJWw1PD+wyYZuEg9kcFVGXUqrgqiK6Rnfg5 nYSWkFIRKyGqoTlHs4TkGih+JgSjkvBUEashGX0m0TlhpNQbW7aHilgNTQXtc6BZ4vbJeuw+ sfk9jYjXJ9p+rvl37/gpSQM7SuAu7MeCgQXKigHLSACth4NWdUHpk6BVNrD1IeCqBxRmdTDT JuiZCYzoByVfwQgwsOQDaBYESemgiQn0eIHVHUAI6xA/Zk0v9kh/b4NscP9A4GeU3OuTUHoP HnB4fg0e3CcsF0uxqhCVbpBd4VrIfOljYF2IMJ6SmNIe7XmjMMtl9F+hk5+SlP57HKa65drr c0T9y9WcPqs6jhD3uA8SAmGIe6zYmDXvUrmjtteB+sr/gMUYXCSZMM5HEuqjlaHWEcqmxfhH J/vNo9bB4ene+UZ9nKV1pMhRPRv6KRXf9HyD5Xtx/KZqVpGv0zw6bLY7r5tnL+fn36nxEiXp c1irKdlT4wiLL+QsJZp4b3gBRIlQ4f/07emGcY+NUd6D6Fa0pxcw4YENuh2tuU2NuU1t6TO2 YSzjh/GtaA6bXHtRNghuiVAT5f1R6Ge3oj1SQN8aamtsxX3UorA1VmCHHMakP46DPISYXHTi UQfVjo7OsrlTzL+9/WSHfPTTmOkjO8TPUL+LaJzzhbmMJBCiskL6KUQ4cdMBC3wM8yGMc+IT phbnJXiPHjmG5xi/nxzj9/OWY3g/u4X3uOEYnlv8puk1RgtlFP5BOwH0aEanSPbRL4/XRuFP LwDoJBmx7ol9sapgzHmWXRrzQTo2MQWtGwo6K1gaHxh9CYj5suZqsGc6KMwTYEtZsGQUFNCF grEt8dXG0XK2YMk2KppdDPz6VhcDooyu6XHSw2SNlXbBBNZi2jrlG6sDsJxoKwIw7i1NYvkk LFIYj5jlhJjlEbAHX0Jac+zFCBWHHkFi4vrjryBVJgJsm8W5FSWM1eeqxuqjtn6V41Ee6vqk iPFAo0IMUiAzAxEV1zUByPrrRuasPbRW5xfHd5yHDjwqCOXLjWsYZzk6mgpja/raTibFzNX6 +gs1g3deT6wYl5qgkojJ9EXIRI6jdtutBGVzZYfkDABLEiTNA7v0MeRDLJyziZqSHsSU9CEl F4wgNmsro1mqZEkU2VBLVmFEc3jcebG/T4jRR8qEx9MM8ck9cMJ5zrSp/f3O4fH+0ZuDVmeK 9JBaWD0e/o3CJKMjbxx/iOFjzKLi8cQbxGOB2Xbt10bt8WO1xMHoVMF/ffSmjf/Pr0WWqQ9+ /NGUOzk66FQoyzH88Udvql7OTNfWafLvn560F9Qzt/XZVTZd+dnJyYK658IqwwnIBV+SYGMW BLhM9olktEc2s4f/Oq/VHz7cvFifDFgl7JsphZYxvg68S5pmzIBQ0NakUO/g9Wnr+eHbQgfO 6J8kpf1wMr+H1myUtStjiUYxMYzjxn9w6Qg7GYhEFUQbVHfZSz/4Tyl5QZIwkyuWgDDgoDm1 +oDGwZCu0iJVkqOvwQC5IHxhbkM3YwOVg388uE/4EJnW7e4SXIdjBVSRYs4vm+HuHdMZ5CnJ o8QTLRpiSgSX1Av7LMqPB9ROJXlKqckqdymLCFdM6SV+mlFHfMmEOGuDI2C8z9h/aT5aiYJE UUVCEtCfnYZko5BIZIuGdiCYQ1A6r/pYnC8gBp6iOhHjikwsfXJdWEnqDyLfGbgeDUYuKZh7 tRwBtFhhTUjdMI98V9NxwvTK3FuVT3kHaUnPewuI4FWJJVg1/NkZWLRWdR1X0/hPLeqpqYF3 wdypQaSiwRibrHpqwAhHjJBfJdbkvTY49sH0kNwZPJ/pswXTen0EowhiZ+BCZm75uauZldOO n+fpSiyGBRWHcSC3mMF4WxfxF++AeewlEgV3qYyKuTDscl7gp8FWk5jGuDaQbvGY6n5bJDXV 4bo5YlMkK7mpT+JpwYkx6yvV2jhvnr5onXWOm69azKycZ4zPMDJzSEb08rMZmWhROJ31HQLM ckiZAXEFY1ezRB9GPRzazBVATo39kT/IVmJcXlIJYgHmFnOtaO0iphVdMI9nZapgWZ1VcSyP cEMlcj3aGRlHrsiNTgKauAOWpK60G380cmXTMLQi2nMHbAQfHQGDJPe7rpp56ad+FrmzA315 NsZFp0VhwXpbE1zRZbNuS6mzZqZ0gELGEbRed+Junsp6XXfAeh/9tO8Y3LY7eJMA+g7RK29Z XAcW3z3k0Gh7P45cuVgCZz7aEYArpMZxCiNX7Nl3J7izfJyErqaUAKJuGLvqfTYNpP6VO4kW jPzMFfnzdS+vuINozalgBF2H8ht3ojkF1nCoD9HUy3xn08vAHcNzXTyhVHP9UiYLFlQWCwdy iw0W3tZF9orqxZnmikgU1orKqIwVDDtZsStAd8IHkLpasMuCoTNFvh+6029TGoCrNjKR6xWW 6V0wJyRhHOYrsacoqhhUArrFLCrbu4hJTW/OZFOVLFjJZFasKmLcMWtxcF2QS4Gel6IWXlIR iwBzi2lFtHYRqeienEkpMlUMo86q6IRHuCMTl0KKt55O8tQPVpMqsqyiFAXqFtOKavEiarF6 dCa96HQxolZ2RTMyyh3VlAbZyWQ0zpPxipMRL6onIwHoFhONbO/CyUj35uzJSCbLqUJn1pMR j3E4GRUG14mYiVbUXLCgFjDR7dZaeFsXipZogcYiEiXDR0VtBcMOxUnkTFNJUuiHI+fbH3K/ u/IOCFbW3gSBoBbSnPKy/4mpL+yTIEqIl5FX/geKA8J6ZCYh7n7Hugavy/0O//FVaQ7uTYZn BnZFTJAQvUuCjwSPx8t0TSl7qK7dh2GA4DW8c3dk8GxmU4YkAntfBotyxwYlQlubdqf6wNVC S558dOfmdLk9q3cVMzMZj5ussp29QdS2ZFBbikFuGgWz4RPUZk0wm9XA2mgG9iYxMBu8wNqc xdhFbrgAa5c839MA9gYHKGxOAHtjAZj1YxBrv6DWbUGsuYJcLwW11glqnRLUGiOo9UElkGbL Ib1SB2qVDcQKGejVLVArU6BWlcCsCIG1mgNmJcaSf+pkr1kKAbGMAXwJAsTyASjXPwi3PSiX O2h3OShXNxg3NRRczKDcw6Bcu6DdslBwqYJwh4Ll/QLpuQLpdQLpMQKizVrtqYGCIQ62vQVF NRoKWhJYkyLoCQ2KMgII52hQ3AiEGAK02GD67IUDNuMCV/27qcesDH438fjT0me42mcHnden J2cnDrpYQcWzRZBD+IdLfalwFt0NOFfrJfa9ri7mruJl8A4gRh8yG1r1yUuNoxhXParz7uwT EsPMPKKUuZWveEGgwuqbLPkmSxbIknFclibV6deUFdAsWJ+bhs0DGky34ZcO4Nl1Dm2jdVRv PZMN3KAjQrsqMP1XWBcRKzx3Z6FIJKoSe1thxG8RcXTuuX3WPD5onh502MfpGT4l0plx1JSP Nb8YRudvvW3tz82qyIIXOWg9b745OuvIDcf/bJ22D0+OWaESbUzlfNXcf3l4fM3uZMEajDg7 z5rt2cjP2MPMEFz7HDGjxQlmR1jWedYSmRVpyyI6Q2Yzz7ymeLUrZ8a7d8TLMDoo3pVR5jK+ 7IK3+9rhd/x6V/O0DJ7VFyAI7xd1A+8u6YESWxyq1yP3MKMAgNEGCP4zHGBXp8BhUV2w8ICN jMWLA+SnaATHnLwjMtKuTBz8VRKWKeeosA41+ADXwVXsgmzDCHrE/zGdl6Ufll7bkZZ+sXom k0ch07L5/l7RUyZRpZSe87mczjADnHnsR/kvGHVa6XPLIJLTrSsgqh4Nwp3K4YRlMbjbZGA1 gNgtCHx0CfLESY1LPZ1RRl+xTyHMJvPaw2GYgrNyY0tYbxUSyMQ0QwzFgN8WjOHA2gLBI73w 8U94clTnQHrnriRGnLUaIqD7J+/56UC0xorr0X4xDo3ddJCVI5lhmAz9qdjhk0dbW1Ox4ZPH MyJ/nRHJDbSpyCdPPkxHxo2t7Rl1YfwsHJJpZJOrdCouS/w0mIoNRmGS0Fm5x9OR0aPtGTmH U1GXT36eRnOq9jCDxz89nsY9wXw4/AlSbx2dKvx6Gh0jHBt4d5uOiunHQgAh2HC5/jBFEl2A ERKokpCcc97e42TFpNZbRlcFfifcz4HJexfyYm3MKuYYj7Jp5lPtQf3877//q/7uwfn9e5/O G582L4yc5byq6r+nYO3OFofT6Ywp7kmS51kWSMByYSmeUTiX5Z5hQgZ/MiWTrOSpWsr8q+I1 kwpRlGm2LXYnq08nlIriI2pybi1XKnMYIbQjnk8ronDaah68aklBIgJSQE5nmapCpVjCFR1h w16aqXra/9tmWvZRm6kYmKyD+NQal4eo4iPpCqbHEKdBISBNaaZxLrz+ps71D+/ZNblmKjSo Cpq7/ReoiMpBaeFVe0u8Nr9eqdC6AubX9oSTLYhwuaQBwYuUNXu+AsMS5NX3G988rt88rl/E 47phTw8PCZscfO+PLe/Xd+f3H+K1ZOeNh4NNkVo/r0Gd/cfCT8UzkNB9L14tCHpMWu7yC/HI RvO08/yo+aK9lwYbInRyKg2qPT9lUc8O28z66rIJNlYhUYCF9vf3GC/hh4gSfITho8NnmAF9 LhZAJ+KJgT060Cgctd7KPybqeG8U87+dNvticwYLvGr+T+vw+PnJIhzKl/bpD2IB0NWcNo9Z K+3miXshTdJZq31mp3NNWl4e+Q6fVvk7m9HmGqv4CuiCRPk2qNLN0dCSoJl0wlgr5h25z7Bq v2wdHe1JkwzDZ80X2gJmYWZrMiLGr+44HPU6JsxIB7+QADFX0BHW654xmlnCrDj+d2buwWTS kfNJh5mBe7O9ZCxjzvSqUob5nbKB18IWM7MYRCTsZuNuKWlpjxRS9tu3fEifvTk8OtgLOIos rkz/MpcceJ6N8WcQNPAhlNXf50D6D5LNxbOhmfzMDFhTf+wN/te5lisBqnK7TCVANE37155Y rQapwrnQSoCuX26oBCYLr90HWQmOWBLedgKr0jGbygTgBif9ttPakCrcxlQJjtBp9XV54mKx ZS8yqEhqFa4dqAQpza2bcNci24Ree35tCbp1Q7aXbliy2jn0SqD6aUjjazetVAJVZV99JUAR zYfgBqeM+ql489cBqMiP8zBwI3ecMcyEqSduOI8msNC+RNXMqAHGTc4nYyBy74+YCLXhx43A jF+HoyYAIMoYEsIXiHqiTOwoUluNEml4cpEAgqEVFARyWTA0JSEDkTaOJCJQJADWAGoDl3ce iKYzu+WCOyxq9YLJccEbbXYr8ZDe83QhXPvGxBY+funcEaK3Zp6H3S2uFFxglbhnkBsiYUw2 2N/7xeWCEqgSBLW98EJhUqnUBVn5umatxAmXEO4G8/q//MINs/43u+ybXfbNLlvaLuOi9OUJ G1dG+0IWiJAiiyruPlXm9WtViqgtCLU649DGeoZb/xq7zfuN/YfPA1SabLoVTo4vB7DCTvnl AI4cYxjA9dfNLAWw5+fXX7O6FER8H/TSAukdvGm3Oi8FiVXdKHBtLVpxUJZJn03ZswwTlDk8 DVw2Mknh/Zdvo6h1dhsxzRvqVlbdj4FdI/vHAiG6U9eb5anXyGssbkbdMvG9+hjOLL69qPi2 Kr49r3gfFhRnie/Vx+zi4aLioSoezise/3tBcZb4Xn3MLg7JguIs8b36mFN8UdeB6jrI7f0L qHpm195suRxfV7lqbCmIFW8SWQpmGCWj8PqrTpaDWeVG2iUh4nKGW5ijCodblgNY4T7vpQBG 1a6hWQqmejzNoWivdHf+UiCz1HGrK9x9uSQ8x0pAljsmxix33oWOVbOswtb3JQFC6l9/fcCS MK/fTb8kQMeTQpZff5RuSYDOmWXsGuCla4DX37q2HMCrqAuOZ+rcTwfU8dDkIG9oSqaeJe33 mTVP8S79DvDdbvgkqcjYKLyHOo7HqGixaYBNLfgI6QVDNHBquKL70W3DS48nuQH6cUhT62VS Yf7P3zmkYUt35HxfCD7u+PjJBw9v6OA/THYm6qyzl9GB3+ulpNM5aJ41yeMt/m93lzzwHnh+ OPn9J+/Xdyz3+QVvqic2+TDjZeChNrA36p1fEO+SbD/9ocG05kFKE/Ls+QF5Wu/Ry3o8Zih+ +iTr+m300Ot2w0EOgfaBCg81ttZYYF2+r6bLncJo1PMdOuh8RvMZpM2r/dV6R47URoHI86pS 7wOurClXtX5gU7ysalzXaO0BVx5wZxD/8flvl/+KaO6dztXeKp/v5ckT/pvy34z/iuJj/nvJ f/l+I8HXoJgROAcJ/3hhL5cgBZjn3P5LOrD7Dt7Sw0/WiwF/sgzfbsIA/ym+4fSZ6ljpLqEg aLDCxEISiIb27Uz3tx2Gf+4dhsgm35XPF6mjPmr/r5IsQpRwqVI4ciT2UAc9zhh8b7U6RqLv 7CgefcEVrwCSK29I/R4jcHm6p/oKgyjQPN3bwLUxvXa2gYtnPKm04LXB5KFc1WJfVp5F6wUo SlQXoKQO5BO3iGNNJ5kjKmssFWDHbUrVIyUGOE9QB7ymou1jLEOfn6Xgook/YT4kmSB1EanS /CRkn8dv91FMtPlTMSfd9wxN9vEaN5kHeKyB8GeekEKGfHrsMXqhfoShYWqfetBnGmr1e//B j//u6v359/6jUv9bxn23vEG/lF4AJg4erDF3yd4V7kLeC5LuXG2g93pMGGVM1mfyABP/1qeW RIqMU6wxCrus7HaN9VHvqnCy6jt90Eydk/pOrhzbRTTdrTtjigdElzlTKedW/eoqk7lsJLY/ 35MvrHJX15VyPnF0aB83dbDJni9SiZMBbIIik8lVZ5x1GElEV7sb5ClSAAu4O67htYkFk1e8 WX/wW/P0+PD4xQ45G4aZFAsZ8cc5RH4e4sR1xS8qw+mz9/2D+qbAbBwzRqiJk3/ceOjY+OuK kLCNRWELc9PwhBWncS/rcJhZACkle6SBfWBXVToBeF35rZnl5162JDMRA8PYdLrXTLPMsWle wAldzKpa8cjS6qcspz9QEeTsAIKU1TFiTYtg12/rj5VPsX+ZM0WzJJE32JKnipjeNAyZ/udl 4R/UE6I+vKQsIQamO7MeoJ7ScDMRq0/2ZeoNK/48bMrs7XG/Xwv4lQtnnWetF4fHvGvTvEsH aKB+1Tbrh7U1avjdPnvz/Hm7c7JsT8jeK3YHdmu5M/jkpMOmN9o3pztaxwdfqDMENTDZw1uv X1RL8/atZwfeyar52Hohj9UlFOk4zsOIquj6g0rTC3nAdOynXJGTAIS9y5d8pUUtPVlcHbMz 2dUywT8TiBHnGr+vN0wFR4NQL7BHTfCrMlQBO2kRGPxkxM3BUB5T0AhKE/1r4ucdTvuTMsYs UTawe1LG3JyulJfEKwSFm+HGYIc7jEN8bEQjqGJuDo7aCDZI6qibgyWz0rgdXCBGGXVzsATu ZLBZW8XcHByjMAssBHnwq2PXZza3ng8NrpYHJ9IYW5E3FW/pbDI4y4ibiq/2iRmMddRXx1lj GYejjjoDpPG0Im8Opug/NChi6KvjNmfk0cpGSW8GXsV8dYzt3vTweusRLXaqigSlK4/CLvcC +3fv+ClJAxNhK6pFpbCggZW0HFunKE3f5YmyPCWVpL8ta6elWFFGlPlvms4tsiqN2ay+Ub7Y r3QWRPnRZIwektLKrZPL/P5KV/l5B0fN/y/vWHubhoHfK+0/mKoSolMfSZE6teIxtoIqwYYY fJqGSfPoIqWl1EkpQvDbuTufHbfrYFvH+0OV8/l8tuu7S2LfXY6eyZOXg4Ph0+GBPHw1hKHY t+Dx7u7tJUafYXgMbu3fIKn/7i6NhSBi4aQJpMFetnl3tTSB2s0g1DlcKYGNECH0mXS7pAzk fUD91E+Tp2fdbv2eWA1R6/M5DVSwGVmpQCcE50CD61bP+jg5W7fbNIc+FAkmTI7FsmZN5v+I 0W/tjfAfaR3+A5sVr/E3LPPWpiBpwSS1JfiXJ4qGq9tdy2IqaP7WL2/T/G9N0fQASKIIYsu5 YVBXMJ/W3l5qRzfNxcntZk+S9fqKyxdYmBWuV0X1NDw4q0JlFV377DFYzl5BdMWjnmms3XGc 65Seg2YLg1qUuCjOzNVQGdTC4Oy2MMAP8dgoHflNYKFlaGU0tAm8TqGlbLKgQy1bZ8B8mQvt l5DiZH90MH/VA0/eK6Zsx2j33pUOCOiMwfkUUzdbVqvfrNdaLZtBMcmCsdpM+fb0bf+s3gdi RjyGLltj25TcVdYdSm4phJq1Z7Mniw1tNV4qJq6bW+nwZqDleGcn3PlB9fcGOfMI8XbwZv/Z AMb+PcvH1BSNa+Kgq25Reg+qGWjwvFGyHj6BNfGtBw8nXPhRJsPG2GMqZgAFKWl1nx/vv5ZH x/AbDA4Hh0Bc+0xi88V2+gLunkP8j02vFyg0Vw/Hzx3AyNlvI7BUKLXQFi7QkuyIyeTdUMXI TYFcewRC+UG0Sw8RxwsrXqa58PqrGTq38EO667wu6hGXzmBr6UxDwPTdRzzdBN4n1w2m4x71 U7XoJjp0DYm7jij/CtmsuotEa97Zbs1zdN+2HNGGo4s2mnEJwhmlHSGjdEHXyfuIroVBFAYz jcdR6guZqfM5IQJ1nhlAY5JEEQk2lh8lFBa6QDzuCxlOZprAAJS1NUqjxIIKwXRZTFWUqNTA yoGjJNKwBYiAYQssnVqGdQ/LpEQz19yhzV3aHGgl/HFyhJ8qk5wbGnDah0bGdPsCotFISHWO nxWTYRYHcxkG4XksZD4PJrP3eIoLjSYB/uWk2hJXEBjNinnMGu7cn2ufcYGMw90t3Wp/gqRu fIrE8+fnPIMy8gDzhmsRpO0srkcf+ptZRCH0bpcr2xe4avFfxWpTyoIPgBZ0xJCgA1BYVGFx WvoBYPEHiOVfQ4zTGsA8WAW4pHUAClr2EWshqwYlrAi2imALyi2gBuhCCbEy6EIJLV0CUzAK 4VQY7rlLn6/Q50hvtQJgVgvEkl4AwIqxU2nBArXCMPMP9sZ7TdUT+0rFk1EWz8UkVioYx6p3 kcrb8zHuCSzeNMh0SqQ7O5V9SuCPYVBJkGagORSBA482En2mJTwIB5+UCJzPWeahzrCOu6Kg gr7f8Zo7lZegoSBRmOlonoOgpUqMinHTMbb1el2cWrk6EwMcgfAcimv7qt517t/E/sLDgenG 38Yl1nTjbexmfSbeFl0w/yDLGoB0Bk+mr/d1vWmNVHinUjkJ5+ksp09CCFjLk2IqDmN4SezA +vQ6nV7bF3673a58A8VCaVX3yQAA --DocE+STaALJfprDB-- From owner-linux-mips@oss.sgi.com Mon Dec 4 08:26:38 2000 Received: by oss.sgi.com id ; Mon, 4 Dec 2000 08:26:28 -0800 Received: from jester.ti.com ([192.94.94.1]:65211 "EHLO jester.ti.com") by oss.sgi.com with ESMTP id ; Mon, 4 Dec 2000 08:26:19 -0800 Received: from dlep7.itg.ti.com ([157.170.134.103]) by jester.ti.com (8.11.1/8.11.1) with ESMTP id eB4GQD508983; Mon, 4 Dec 2000 10:26:13 -0600 (CST) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA28421; Mon, 4 Dec 2000 10:26:12 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA28405; Mon, 4 Dec 2000 10:26:12 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.180]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA06285; Mon, 4 Dec 2000 10:26:11 -0600 (CST) Message-ID: <3A2BC5DB.AA1E1E77@ti.com> Date: Mon, 04 Dec 2000 09:27:07 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Mike Mattice CC: linux-mips@oss.sgi.com Subject: Re: egcs 1.1.2 build with 1.0.2 References: <20001204094231.A6622@milliways.cx> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Mike Mattice wrote: > I'm trying to build this on a cobalt. > Quick and dirty summary: > > /tmp/ccl2C8g8.s: Assembler messages: > /tmp/ccl2C8g8.s:182: Internal error! > Assertion failure in mips_emit_delays at ./config/tc-mips.c line 2231. > Please report this bug. > > gcc -v reports: > Reading specs from /usr/lib/gcc-lib/mipsel-redhat-linux/egcs-2.90.27/specs > gcc version egcs-2.90.27 980315 (egcs-1.0.2 release) I ran into this same problem about a month ago (Although I was building 1.0.3 from 1.0.2 on different hardware). I spent about 2 weeks working on it and found no resolution. There were a couple of suggestions posted to mips-linux which you might try (search for mips_emit_delays). If you find a solution I would be very interested. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Mon Dec 4 10:14:49 2000 Received: by oss.sgi.com id ; Mon, 4 Dec 2000 10:14:40 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:6918 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Mon, 4 Dec 2000 10:14:35 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXBFP7MBKQ0014XM@research.kpn.com> for linux-mips@oss.sgi.com; Mon, 4 Dec 2000 19:14:32 +0100 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) with ESMTP id TAA06250; Mon, 04 Dec 2000 19:14:30 +0100 (MET) Date: Mon, 04 Dec 2000 19:14:30 +0100 From: "Houten K.H.C. van (Karel)" X-Face: ";:TzQQC{mTp~$W,'m4@Lu1Lu$rtG_~5kvYO~F:C'KExk9o1X"iRz[0%{bq?6Aj#>VhSD?v 1W9`.Qsf+P&*iQEL8&y,RDj&U.]!(R-?c-h5h%Iw%r$|%6+Jc>GTJe!_1&A0o'lC[`I#={2BzOXT1P q366I$WL=;[+SDo1RoIT+a}_y68Y:jQ^xp4=*4-ryiymi>hy Subject: Re: [SUCCESS] 2.4.0-test11 on Decstation 5000/150 (R4000) In-reply-to: "Your message of Sun, 03 Dec 2000 17:04:30 +0100." <20001203170430.A1504@paradigm.rfc822.org> To: Florian Lohoff Cc: linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Reply-to: K.H.C.vanHouten@kpn.com Message-id: <200012041814.TAA06250@sparta.research.kpn.com> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Florian Lohoff writes: > >Hi, >here is the short output - We needed to change ethernet, scsi >initialization and the vmalloc bug ... > > ... successfull decstation boot of linux 2.4-test11 I did try some kernel compiles with my new toolchain on my decstation, with the following result: egcs-1.0.3a-1 / binutils-2.10.91-1lm : Userland compiles fine, Kernel compile fails egcs-1.0.2-9 / binutils-2.8.1-2D1 : Kernel compiles OK. Florian, do you compile native? and with which compiler / binutils? Has anyone else a working toolchain for native building on mipsel ? Regards, Karel. From owner-linux-mips@oss.sgi.com Mon Dec 4 10:31:49 2000 Received: by oss.sgi.com id ; Mon, 4 Dec 2000 10:31:29 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:58886 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 4 Dec 2000 10:30:57 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id EC291803; Mon, 4 Dec 2000 19:30:54 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 452458F74; Mon, 4 Dec 2000 19:29:46 +0100 (CET) Date: Mon, 4 Dec 2000 19:29:46 +0100 From: Florian Lohoff To: K.H.C.vanHouten@kpn.com Cc: linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Subject: Re: [SUCCESS] 2.4.0-test11 on Decstation 5000/150 (R4000) Message-ID: <20001204192946.A1109@paradigm.rfc822.org> References: <20001203170430.A1504@paradigm.rfc822.org> <200012041814.TAA06250@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200012041814.TAA06250@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Mon, Dec 04, 2000 at 07:14:30PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 04, 2000 at 07:14:30PM +0100, Houten K.H.C. van (Karel) wrote: > Florian Lohoff writes: > > > >Hi, > >here is the short output - We needed to change ethernet, scsi > >initialization and the vmalloc bug ... > > > > ... successfull decstation boot of linux 2.4-test11 > > I did try some kernel compiles with my new toolchain on my decstation, > with the following result: > > egcs-1.0.3a-1 / binutils-2.10.91-1lm : Userland compiles fine, > Kernel compile fails > egcs-1.0.2-9 / binutils-2.8.1-2D1 : Kernel compiles OK. > > Florian, do you compile native? and with which compiler / binutils? > > Has anyone else a working toolchain for native building on mipsel ? I am cross compiling kernels - I use egcs 1.1.2 + binutils 2.8.1 which is the recommended setup for kernels >= 2.4.0-test11 I do compile userspace with glibc 2.0.6 with egcs 1.0.3a + binutils 2.8.1 and for glibc 2.2 setups with gcc + binutils cvs from 20001007 + some patches ... Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Dec 4 10:58:20 2000 Received: by oss.sgi.com id ; Mon, 4 Dec 2000 10:58:10 -0800 Received: from u-49-20.karlsruhe.ipdial.viaginterkom.de ([62.180.20.49]:62734 "EHLO u-49-20.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 4 Dec 2000 10:57:57 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Mon, 4 Dec 2000 19:57:45 +0100 Date: Mon, 4 Dec 2000 19:57:45 +0100 From: Ralf Baechle To: K.H.C.vanHouten@kpn.com Cc: Florian Lohoff , linux-mips@oss.sgi.com, K.H.C.vanHouten@research.kpn.com Subject: Re: [SUCCESS] 2.4.0-test11 on Decstation 5000/150 (R4000) Message-ID: <20001204195745.E12738@bacchus.dhis.org> References: <20001203170430.A1504@paradigm.rfc822.org> <200012041814.TAA06250@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200012041814.TAA06250@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Mon, Dec 04, 2000 at 07:14:30PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 04, 2000 at 07:14:30PM +0100, Houten K.H.C. van (Karel) wrote: > >here is the short output - We needed to change ethernet, scsi > >initialization and the vmalloc bug ... > > > > ... successfull decstation boot of linux 2.4-test11 > > I did try some kernel compiles with my new toolchain on my decstation, > with the following result: > > egcs-1.0.3a-1 / binutils-2.10.91-1lm : Userland compiles fine, > Kernel compile fails > egcs-1.0.2-9 / binutils-2.8.1-2D1 : Kernel compiles OK. egcs 1.0.x will misscompile kernels; therefore from test10 on the kernel refuses to compile. Ralf From owner-linux-mips@oss.sgi.com Tue Dec 5 01:28:46 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 01:28:35 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:45391 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 01:28:14 -0800 Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id BAA09785 for ; Tue, 5 Dec 2000 01:28:06 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) for id RAA10706; Tue, 5 Dec 2000 17:37:49 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 17:31:35 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CC3@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'linux-mips'" Subject: oss ftp server down? Date: Tue, 5 Dec 2000 17:31:27 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Is it down? I can't access it... -- Calvine Chew, Technical Consultant Technology & Industry Consulting Group (Asia South), SGI. *************************************************************** Inter spem curamque, timores inter et iras, omnem crede diem tibi diluxisse supremum: grata superveniet quae sperabitur hora. http://www.cyberjunkie.com/arcana *************************************************************** From owner-linux-mips@oss.sgi.com Tue Dec 5 01:35:05 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 01:34:56 -0800 Received: from web1.lanscape.net ([64.240.156.194]:45580 "EHLO web1.lanscape.net") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 01:34:50 -0800 Received: from sumpf.cyrius.com (IDENT:root@web1.lanscape.net [64.240.156.194]) by web1.lanscape.net (8.9.3/8.9.3) with ESMTP id DAA08869; Tue, 5 Dec 2000 03:34:14 -0600 Received: by sumpf.cyrius.com (Postfix, from userid 1000) id 17E81150CF; Tue, 5 Dec 2000 09:39:30 +0000 (GMT) Date: Tue, 5 Dec 2000 09:39:30 +0000 From: Martin Michlmayr To: Calvine Chew Cc: "'linux-mips'" Subject: Re: oss ftp server down? Message-ID: <20001205093930.A867@sumpf.cyrius.com> References: <43FECA7CDC4CD411A4A3009027999112267CC3@sgp-apsa001e--n.singapore.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <43FECA7CDC4CD411A4A3009027999112267CC3@sgp-apsa001e--n.singapore.sgi.com>; from calvine@sgi.com on Tue, Dec 05, 2000 at 05:31:27PM +0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing * Calvine Chew [20001205 17:31]: > Is it down? I can't access it... I just tried ftp://oss.sgi.com/pub/linux/mips and it works. -- Martin Michlmayr tbm@cyrius.com From owner-linux-mips@oss.sgi.com Tue Dec 5 01:44:45 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 01:44:25 -0800 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:25385 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 01:44:13 -0800 Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via SMTP id BAA03721 for ; Tue, 5 Dec 2000 01:52:19 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id RAA11144; Tue, 5 Dec 2000 17:53:50 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Tue, 5 Dec 2000 17:47:36 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CC4@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'Martin Michlmayr'" Cc: "'linux-mips@oss.sgi.com'" Subject: RE: oss ftp server down? Date: Tue, 5 Dec 2000 17:47:34 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing That's really weird. I used to be able to access the oss.sgi.com ftp server until recently... I keep getting timeouts... > -----Original Message----- > From: Martin Michlmayr [mailto:tbm@cyrius.com] > Sent: Tuesday, December 05, 2000 5:40 PM > To: Calvine Chew > Cc: 'linux-mips' > Subject: Re: oss ftp server down? > > > * Calvine Chew [20001205 17:31]: > > Is it down? I can't access it... > > I just tried ftp://oss.sgi.com/pub/linux/mips and it works. > -- > Martin Michlmayr > tbm@cyrius.com > From owner-linux-mips@oss.sgi.com Tue Dec 5 02:12:15 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 02:11:56 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:5893 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 02:11:31 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXCD4NDS4K001214@research.kpn.com>; Tue, 5 Dec 2000 11:11:28 +0100 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) with ESMTP id LAA18560; Tue, 05 Dec 2000 11:11:28 +0100 (MET) Date: Tue, 05 Dec 2000 11:11:28 +0100 From: "Houten K.H.C. van (Karel)" X-Face: ";:TzQQC{mTp~$W,'m4@Lu1Lu$rtG_~5kvYO~F:C'KExk9o1X"iRz[0%{bq?6Aj#>VhSD?v 1W9`.Qsf+P&*iQEL8&y,RDj&U.]!(R-?c-h5h%Iw%r$|%6+Jc>GTJe!_1&A0o'lC[`I#={2BzOXT1P q366I$WL=;[+SDo1RoIT+a}_y68Y:jQ^xp4=*4-ryiymi>hy Subject: Re: [SUCCESS] 2.4.0-test11 on Decstation 5000/150 (R4000) In-reply-to: "Your message of Mon, 04 Dec 2000 19:57:45 +0100." <20001204195745.E12738@bacchus.dhis.org> To: Ralf Baechle Cc: linux-mips@oss.sgi.com Reply-to: K.H.C.vanHouten@kpn.com Message-id: <200012051011.LAA18560@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: exmh version 1.6.5 12/11/95 Content-type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf wrote: > egcs 1.0.x will misscompile kernels; therefore from test10 on the kernel > refuses to compile. > Is there any compiler source that can be compiled native on mipsel, and can compile kernels on mipsel (native)? Regards, Karel. -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Tue Dec 5 02:36:05 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 02:35:56 -0800 Received: from router.isratech.ro ([193.226.114.69]:32781 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 02:35:41 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eB5AXvV05087 for ; Tue, 5 Dec 2000 12:34:20 +0200 Message-ID: <3A2D310E.CA3BE148@isratech.ro> Date: Tue, 05 Dec 2000 13:16:47 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: X on ATLAS. Content-Type: multipart/mixed; boundary="------------304B261A0E1FC155F593FB3F" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------304B261A0E1FC155F593FB3F Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello , Does anyone know something about running X on a mips machine ( ATLAS board + QEV processor ) ? Please try to give me a clue . Regards, Nicu --------------304B261A0E1FC155F593FB3F Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------304B261A0E1FC155F593FB3F-- From owner-linux-mips@oss.sgi.com Tue Dec 5 05:07:37 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 05:07:26 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:47880 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 05:07:16 -0800 Received: from bilbo.physik.uni-konstanz.de [134.34.144.81] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 143HoH-0004Qn-00; Tue, 05 Dec 2000 14:07:05 +0100 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 143HoG-0007TL-00; Tue, 05 Dec 2000 14:07:04 +0100 Date: Tue, 5 Dec 2000 14:07:04 +0100 From: Guido Guenther To: Nicu Popovici Cc: linux-mips@oss.sgi.com Subject: Re: X on ATLAS. Message-ID: <20001205140704.C28457@bilbo.physik.uni-konstanz.de> References: <3A2D310E.CA3BE148@isratech.ro> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A2D310E.CA3BE148@isratech.ro>; from octavp@isratech.ro on Tue, Dec 05, 2000 at 01:16:47PM -0500 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, On Tue, Dec 05, 2000 at 01:16:47PM -0500, Nicu Popovici wrote: > Does anyone know something about running X on a mips machine ( ATLAS > board + QEV processor ) ? Please try to give me a clue . What kind of graphic hardware does the ATLAS board have. If you have a framebuffer device you should be able to get X(>=4.0.1) running fairly easily. -- Guido From owner-linux-mips@oss.sgi.com Tue Dec 5 05:49:55 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 05:49:45 -0800 Received: from router.isratech.ro ([193.226.114.69]:17930 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 05:49:22 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eB5DmnV10622 for ; Tue, 5 Dec 2000 15:48:49 +0200 Message-ID: <3A2D60BB.311D4ECA@isratech.ro> Date: Tue, 05 Dec 2000 16:40:11 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: MIPS ext2fs problem. Content-Type: multipart/mixed; boundary="------------B8002E3D75EB3A6D39F5DC8D" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------B8002E3D75EB3A6D39F5DC8D Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I did port the ATLAS support from linux-2.2.12 kernel into linux-2.2.14 . I saw that there is a problem, if I reset the computer in an unusual way then at restart it tries to do e2fsck on the hdd. My problem is that when I run linux 2.2.14 ( for ATLAS , that we ported ) it get stucked in running e2fsck. Do you have any ideea of what is happening ? Regards, Nicu --------------B8002E3D75EB3A6D39F5DC8D Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------B8002E3D75EB3A6D39F5DC8D-- From owner-linux-mips@oss.sgi.com Tue Dec 5 08:27:36 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 08:27:26 -0800 Received: from [207.81.221.34] ([207.81.221.34]:44831 "EHLO relay") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 08:27:12 -0800 Received: from vcubed.com ([207.81.96.153]) by relay (8.8.7/8.8.7) with ESMTP id MAA23068; Tue, 5 Dec 2000 12:50:33 -0500 Message-ID: <3A2D1860.4551C813@vcubed.com> Date: Tue, 05 Dec 2000 11:31:28 -0500 From: Dan Aizenstros Organization: V3 Semiconductor X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: X on ATLAS. References: <3A2D310E.CA3BE148@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have X running on a V3 Hurricane board which has a QED RM5231 CPU and is operating in little endian mode. I use ATI Rage IIC (PCI) video boards. I am using the XFree86 version 3.3.2 and the FBDev server. What is your specific problem or question? Dan Aizenstros Software Engineer V3 Semiconductor Corp. Nicu Popovici wrote: > > Hello , > > Does anyone know something about running X on a mips machine ( ATLAS > board + QEV processor ) ? Please try to give me a clue . > > Regards, > Nicu From owner-linux-mips@oss.sgi.com Tue Dec 5 09:47:06 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 09:46:56 -0800 Received: from u-153-21.karlsruhe.ipdial.viaginterkom.de ([62.180.21.153]:34832 "EHLO u-153-21.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 09:46:40 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Tue, 5 Dec 2000 18:46:22 +0100 Date: Tue, 5 Dec 2000 18:46:22 +0100 From: Ralf Baechle To: Nicu Popovici Cc: linux-mips@oss.sgi.com Subject: Re: MIPS ext2fs problem. Message-ID: <20001205184622.A16354@bacchus.dhis.org> References: <3A2D60BB.311D4ECA@isratech.ro> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A2D60BB.311D4ECA@isratech.ro>; from octavp@isratech.ro on Tue, Dec 05, 2000 at 04:40:11PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Dec 05, 2000 at 04:40:11PM -0500, Nicu Popovici wrote: > I did port the ATLAS support from linux-2.2.12 kernel into linux-2.2.14 > . I saw that there is a problem, if I reset the computer in an unusual > way then at restart it tries to do e2fsck on the hdd. My problem is > that when I run linux 2.2.14 ( for ATLAS , that we ported ) it get > stucked in running e2fsck. Do you have any ideea of what is happening ? Most probably this is a driver or other kernel issues. Ralf From owner-linux-mips@oss.sgi.com Tue Dec 5 09:50:37 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 09:50:26 -0800 Received: from u-153-21.karlsruhe.ipdial.viaginterkom.de ([62.180.21.153]:36368 "EHLO u-153-21.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 09:50:19 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Tue, 5 Dec 2000 18:50:05 +0100 Date: Tue, 5 Dec 2000 18:50:05 +0100 From: Ralf Baechle To: Calvine Chew Cc: 'Martin Michlmayr' , "'linux-mips@oss.sgi.com'" Subject: Re: oss ftp server down? Message-ID: <20001205185005.B16354@bacchus.dhis.org> References: <43FECA7CDC4CD411A4A3009027999112267CC4@sgp-apsa001e--n.singapore.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <43FECA7CDC4CD411A4A3009027999112267CC4@sgp-apsa001e--n.singapore.sgi.com>; from calvine@sgi.com on Tue, Dec 05, 2000 at 05:47:34PM +0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Dec 05, 2000 at 05:47:34PM +0800, Calvine Chew wrote: > That's really weird. I used to be able to access the oss.sgi.com ftp server > until recently... I keep getting timeouts... [ralf@lappi ralf]$ ssh oss.sgi.com uptime 9:47am up 12 days, 17:23, 0 users, load average: 0.00, 0.00, 0.00 [ralf@lappi ralf]$ Inside SGI those timeouts are usually explained by an incorrect SOCKS client setup. SOCKS sucks. Spell all uppercase. Ralf From owner-linux-mips@oss.sgi.com Tue Dec 5 09:58:06 2000 Received: by oss.sgi.com id ; Tue, 5 Dec 2000 09:57:56 -0800 Received: from mx.mips.com ([206.31.31.226]:12482 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Tue, 5 Dec 2000 09:57:48 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id JAA20445; Tue, 5 Dec 2000 09:57:43 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id JAA26082; Tue, 5 Dec 2000 09:57:40 -0800 (PST) Message-ID: <01c701c05ee5$587a36a0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Nicu Popovici" , References: <3A2D60BB.311D4ECA@isratech.ro> Subject: Re: MIPS ext2fs problem. Date: Tue, 5 Dec 2000 19:00:58 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > I did port the ATLAS support from linux-2.2.12 kernel into linux-2.2.14 > . I saw that there is a problem, if I reset the computer in an unusual > way then at restart it tries to do e2fsck on the hdd. My problem is > that when I run linux 2.2.14 ( for ATLAS , that we ported ) it get > stucked in running e2fsck. Do you have any ideea of what is happening ? Are you using SCSI disks, and if so, did you merge the SCSI driver from the MIPS 2.2.12 kernel into your 2.2.14 base? The standard distribution of that driver wasn't 100% cache safe for MIPS, and probably still isn't. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Dec 6 13:53:33 2000 Received: by oss.sgi.com id ; Wed, 6 Dec 2000 13:53:13 -0800 Received: from widukind.bi.teuto.net ([212.8.197.28]:61713 "EHLO widukind.bi.teuto.net") by oss.sgi.com with ESMTP id ; Wed, 6 Dec 2000 13:52:56 -0800 Received: from p400 (pD902EA4B.dip.t-dialin.net [217.2.234.75]) by widukind.bi.teuto.net (8.9.3/8.9.3) with SMTP id WAA07519 for ; Wed, 6 Dec 2000 22:52:53 +0100 Message-ID: <002701c05fce$98879d20$3264a8c0@brainstaff.de> From: "Ingo Rose" To: Subject: rm linux port? Date: Wed, 6 Dec 2000 22:15:29 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 X-Popauth-Info: 976139540 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing is there a port for for sni rm200 available? regards, ingo From owner-linux-mips@oss.sgi.com Thu Dec 7 06:20:39 2000 Received: by oss.sgi.com id ; Thu, 7 Dec 2000 06:20:29 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:45067 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Thu, 7 Dec 2000 06:20:01 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 590E2855; Thu, 7 Dec 2000 15:19:59 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id B4F4E8F74; Thu, 7 Dec 2000 13:34:05 +0100 (CET) Date: Thu, 7 Dec 2000 13:34:05 +0100 From: Florian Lohoff To: Ingo Rose Cc: linux-mips@oss.sgi.com Subject: Re: rm linux port? Message-ID: <20001207133405.B4305@paradigm.rfc822.org> References: <002701c05fce$98879d20$3264a8c0@brainstaff.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <002701c05fce$98879d20$3264a8c0@brainstaff.de>; from ingo@beldam.teuto.de on Wed, Dec 06, 2000 at 10:15:29PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Dec 06, 2000 at 10:15:29PM +0100, Ingo Rose wrote: > > is there a port for for sni rm200 available? > There was a port for the RM200 (Little Endian / Windows Firmware) although i dont think anyone has looked after it for a while (while >= 2 Years) Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Thu Dec 7 07:59:48 2000 Received: by oss.sgi.com id ; Thu, 7 Dec 2000 07:59:38 -0800 Received: from mx.mips.com ([206.31.31.226]:14566 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 7 Dec 2000 07:59:34 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id HAA13203 for ; Thu, 7 Dec 2000 07:59:30 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id HAA12327 for ; Thu, 7 Dec 2000 07:59:29 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id QAA03748 for ; Thu, 7 Dec 2000 16:59:08 +0100 (MET) Message-ID: <3A2FB3CB.3566F805@mips.com> Date: Thu, 07 Dec 2000 16:59:07 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Setup a signal frame. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I have a question regarding the setup_frame function in arch/mips/kernel/signal.c. If the setup fails we send a SIGSEGV to the current process, but before doing that we check if signr == SIGSEGV, and if so install the default handler. But isn't we sending a SIGSEGV signal, and therefore always should install the default handler and not check if the original signal was SIGSEGV ? In kernel 2.2.12 we always used do_exit(SIGSEGV) if the setup failed, why has this changed in the 2.4.0 kernel ? /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Dec 7 19:13:42 2000 Received: by oss.sgi.com id ; Thu, 7 Dec 2000 19:13:22 -0800 Received: from hybrid-024-221-181-223.ca.sprintbbd.net ([24.221.181.223]:60660 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Thu, 7 Dec 2000 19:12:57 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eB84ArS29663; Thu, 7 Dec 2000 20:10:53 -0800 Message-ID: <3A3051C1.DCFC749B@mvista.com> Date: Thu, 07 Dec 2000 19:13:05 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Should /dev/kmem support above 0x80000000 area? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Currently one cannot read memory area above 0x80000000 throught /dev/kmem. In fact, an earlier bug would put the process into an infinite loop if you try to do that. That seems to be fixed now. It seems to be very useful if we do allow that access. What do you think? Ralf, if we do want to enable it - which is pretty simple to do -, should I give you the patch or shuld I submit it to somebody else who is maintaining /dev/kmem? Jun From owner-linux-mips@oss.sgi.com Fri Dec 8 02:21:45 2000 Received: by oss.sgi.com id ; Fri, 8 Dec 2000 02:21:25 -0800 Received: from router.isratech.ro ([193.226.114.69]:55822 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 8 Dec 2000 02:21:02 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eB8AKdJ13741 for ; Fri, 8 Dec 2000 12:20:40 +0200 Message-ID: <3A312472.EC810DE0@isratech.ro> Date: Fri, 08 Dec 2000 13:12:02 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: ODD question. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello you all, I have the following problem. Can I cross compile a Linux code for SCO_UNIX operating sistem ? There is someone or does have any ideea of setting uop a cross compiler for SCO_UNIX operating sistem ? Best Regards, Nicu From owner-linux-mips@oss.sgi.com Fri Dec 8 04:00:04 2000 Received: by oss.sgi.com id ; Fri, 8 Dec 2000 03:59:54 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:17905 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Fri, 8 Dec 2000 03:59:31 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id MAA08985; Fri, 8 Dec 2000 12:57:20 +0100 (MET) Date: Fri, 8 Dec 2000 12:57:19 +0100 (MET) From: "Maciej W. Rozycki" To: Nicu Popovici cc: linux-mips@oss.sgi.com Subject: Re: ODD question. In-Reply-To: <3A312472.EC810DE0@isratech.ro> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 8 Dec 2000, Nicu Popovici wrote: > I have the following problem. Can I cross compile a Linux code for > SCO_UNIX operating sistem ? There is someone or does have any ideea of > setting uop a cross compiler for SCO_UNIX operating sistem ? Just build a cross-toolchain in the usual way. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Fri Dec 8 04:56:55 2000 Received: by oss.sgi.com id ; Fri, 8 Dec 2000 04:56:45 -0800 Received: from router.isratech.ro ([193.226.114.69]:19208 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 8 Dec 2000 04:56:29 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eB8CrOJ17289; Fri, 8 Dec 2000 14:53:31 +0200 Message-ID: <3A314835.CE0FE333@isratech.ro> Date: Fri, 08 Dec 2000 15:44:37 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Maciej W. Rozycki" , linux-mips@oss.sgi.com Subject: Re: ODD question. References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Can you tell me the parameters for a building a cross-toolchain for SCO_UNIX operating sistem. I looked for something like that in info gcc, man gcc and I did not find anything! Regards, Nicu "Maciej W. Rozycki" wrote: > On Fri, 8 Dec 2000, Nicu Popovici wrote: > > > I have the following problem. Can I cross compile a Linux code for > > SCO_UNIX operating sistem ? There is someone or does have any ideea of > > setting uop a cross compiler for SCO_UNIX operating sistem ? > > Just build a cross-toolchain in the usual way. > > -- > + Maciej W. Rozycki, Technical University of Gdansk, Poland + > +--------------------------------------------------------------+ > + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Fri Dec 8 05:46:55 2000 Received: by oss.sgi.com id ; Fri, 8 Dec 2000 05:46:35 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:38898 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Fri, 8 Dec 2000 05:46:11 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA12067; Fri, 8 Dec 2000 14:32:57 +0100 (MET) Date: Fri, 8 Dec 2000 14:32:56 +0100 (MET) From: "Maciej W. Rozycki" To: Nicu Popovici cc: linux-mips@oss.sgi.com Subject: Re: ODD question. In-Reply-To: <3A314835.CE0FE333@isratech.ro> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 8 Dec 2000, Nicu Popovici wrote: > Can you tell me the parameters for a building a cross-toolchain for > SCO_UNIX operating sistem. I looked for something like that in info gcc, > man gcc and I did not find anything! Run config.guess (available in the top-level directory of the tools) on your SCO host system and use the output for target specification when configuring tools. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Fri Dec 8 15:33:38 2000 Received: by oss.sgi.com id ; Fri, 8 Dec 2000 15:33:19 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:34800 "EHLO lappi") by oss.sgi.com with ESMTP id ; Fri, 8 Dec 2000 15:32:45 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 9 Dec 2000 00:32:23 +0100 Date: Sat, 9 Dec 2000 00:32:23 +0100 From: Ralf Baechle To: Jun Sun Cc: linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? Message-ID: <20001209003222.A10669@bacchus.dhis.org> References: <3A3051C1.DCFC749B@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A3051C1.DCFC749B@mvista.com>; from jsun@mvista.com on Thu, Dec 07, 2000 at 07:13:05PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Dec 07, 2000 at 07:13:05PM -0800, Jun Sun wrote: > Currently one cannot read memory area above 0x80000000 throught /dev/kmem. In > fact, an earlier bug would put the process into an infinite loop if you try to > do that. That seems to be fixed now. > > It seems to be very useful if we do allow that access. What do you think? Actually there is almost nothing left that uses /dev/{mem,kmem} these days. Nevertheless it's a supported interface, so we have to get it right. > Ralf, if we do want to enable it - which is pretty simple to do -, should I > give you the patch or shuld I submit it to somebody else who is maintaining > /dev/kmem? Send me the patch and I'll comment. Ralf From owner-linux-mips@oss.sgi.com Mon Dec 11 03:56:05 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 03:55:55 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:21394 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 03:55:31 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id MAA20895; Mon, 11 Dec 2000 12:28:19 +0100 (MET) Date: Mon, 11 Dec 2000 12:28:19 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Jun Sun , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? In-Reply-To: <20001209003222.A10669@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 9 Dec 2000, Ralf Baechle wrote: > Actually there is almost nothing left that uses /dev/{mem,kmem} these days. Last time I checked /dev/mem worked as expected. For Alpha /dev/mem is used to emulate PCI/ISA I/O space accesses (ioperm(), inb/outb() and friends) by glibc. At least XFree86 and SVGATextMode make use of these features. I suppose it's the same for MIPS (I haven't checked, though). In general /dev/mem is useful for poking at hardware from user space. On the other hand, /dev/kmem is not very useful anymore, indeed. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Mon Dec 11 04:42:36 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 04:42:26 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:50950 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 04:42:12 -0800 Received: from faramir.physik.uni-konstanz.de [134.34.144.86] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 145SGs-0003BM-00; Mon, 11 Dec 2000 13:41:34 +0100 Received: from agx by faramir.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 145SGs-0002HB-00; Mon, 11 Dec 2000 13:41:34 +0100 Date: Mon, 11 Dec 2000 13:41:33 +0100 From: Guido Guenther To: "Maciej W. Rozycki" Cc: linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? Message-ID: <20001211134133.A8720@faramir.physik.uni-konstanz.de> References: <20001209003222.A10669@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from macro@ds2.pg.gda.pl on Mon, Dec 11, 2000 at 12:28:19PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 11, 2000 at 12:28:19PM +0100, Maciej W. Rozycki wrote: > friends) by glibc. At least XFree86 and SVGATextMode make use of these > features. I suppose it's the same for MIPS (I haven't checked, though). Yes. xf86MapVidMem & friends use /dev/mem to mmap videomemory & iospace independent of architecure. -- Guido From owner-linux-mips@oss.sgi.com Mon Dec 11 05:27:47 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 05:27:38 -0800 Received: from mx.mips.com ([206.31.31.226]:28317 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 05:27:27 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id FAA11768 for ; Mon, 11 Dec 2000 05:27:23 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id FAA14567 for ; Mon, 11 Dec 2000 05:27:22 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id OAA19198 for ; Mon, 11 Dec 2000 14:26:58 +0100 (MET) Message-ID: <3A34D621.51AB8654@mips.com> Date: Mon, 11 Dec 2000 14:26:57 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Crosscompiler Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Where can I find a precompiled crosscompiler for mips 64 little endian ? I coundn't find any under ftp://oss.sgi.com/pub/linux/mips/crossdev/i386-linux/ /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Mon Dec 11 10:26:57 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 10:26:47 -0800 Received: from hybrid-024-221-181-223.ca.sprintbbd.net ([24.221.181.223]:40693 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 10:26:32 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBBJMOS20966; Mon, 11 Dec 2000 11:22:24 -0800 Message-ID: <3A358CEB.1B986EB7@mvista.com> Date: Mon, 11 Dec 2000 18:26:51 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Guido Guenther CC: "Maciej W. Rozycki" , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? References: <20001209003222.A10669@bacchus.dhis.org> <20001211134133.A8720@faramir.physik.uni-konstanz.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Guido Guenther wrote: > > On Mon, Dec 11, 2000 at 12:28:19PM +0100, Maciej W. Rozycki wrote: > > friends) by glibc. At least XFree86 and SVGATextMode make use of these > > features. I suppose it's the same for MIPS (I haven't checked, though). > Yes. xf86MapVidMem & friends use /dev/mem to mmap videomemory & iospace > independent of architecure. > -- Guido I am surprised. I thought /dev/mem is for accessing SYSTEM RAM. (do a 'man' on /dev/mem) It is also confirmed by the code in drivers/char/mem.c. If you want to access anything beyond 'high_memory", nothing is read. Note that drivers/char/mem.c is cross-platform code. I am not sure how X would access video memory through /dev/mem on either MIPS or other platforms. That reason I want to fix /dev/kmem is that in some cases before a driver is written people want to play with the hardware directly from the userland (especially for demo purpose. :-0) Very useful for embedded systems. Potentially fixing /dev/mem can do the same job. However /dev/mem cannot differentiate cached or uncached accesses. With /dev/kmem, we just specify 0x8.. or 0xa.... Jun From owner-linux-mips@oss.sgi.com Mon Dec 11 10:59:37 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 10:59:27 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:51720 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 10:59:17 -0800 Received: from faramir.physik.uni-konstanz.de [134.34.144.86] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 145Y7i-00050f-00; Mon, 11 Dec 2000 19:56:30 +0100 Received: from agx by faramir.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 145Y7i-0003Mu-00; Mon, 11 Dec 2000 19:56:30 +0100 Date: Mon, 11 Dec 2000 19:56:30 +0100 From: Guido Guenther To: Jun Sun Cc: linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? Message-ID: <20001211195630.A12935@faramir.physik.uni-konstanz.de> References: <20001209003222.A10669@bacchus.dhis.org> <20001211134133.A8720@faramir.physik.uni-konstanz.de> <3A358CEB.1B986EB7@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A358CEB.1B986EB7@mvista.com>; from jsun@mvista.com on Mon, Dec 11, 2000 at 06:26:51PM -0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 11, 2000 at 06:26:51PM -0800, Jun Sun wrote: > Guido Guenther wrote: > > > > On Mon, Dec 11, 2000 at 12:28:19PM +0100, Maciej W. Rozycki wrote: > > > friends) by glibc. At least XFree86 and SVGATextMode make use of these > > > features. I suppose it's the same for MIPS (I haven't checked, though). > > Yes. xf86MapVidMem & friends use /dev/mem to mmap videomemory & iospace > > independent of architecure. > > -- Guido > > > I am surprised. I thought /dev/mem is for accessing SYSTEM RAM. (do a 'man' I'd not call it system ram but rather ''visible address space'' or something. If there's actually ''system ram'' or the fb of a graphics card at a given address doesn't make a difference. > on /dev/mem) It is also confirmed by the code in drivers/char/mem.c. If you > want to access anything beyond 'high_memory", nothing is read. > > Note that drivers/char/mem.c is cross-platform code. I am not sure how X > would access video memory through /dev/mem on either MIPS or other platforms. The newports REX3 for example is at (KSEG1 + 0x1f0f000) which is mmaped by the xserver to access the REX3s registers. -- Guido From owner-linux-mips@oss.sgi.com Mon Dec 11 11:06:37 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 11:06:27 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:60057 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 11:06:21 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id UAA10251; Mon, 11 Dec 2000 20:05:45 +0100 (MET) Date: Mon, 11 Dec 2000 20:05:45 +0100 (MET) From: "Maciej W. Rozycki" To: Jun Sun cc: Guido Guenther , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? In-Reply-To: <3A358CEB.1B986EB7@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 11 Dec 2000, Jun Sun wrote: > I am surprised. I thought /dev/mem is for accessing SYSTEM RAM. (do a 'man' You access the memory space. Whatever is found at the address you specify, be it RAM, an MMIO area or unoccupied space. You may receive a bus error in the latter case (depending on a system configuration). > on /dev/mem) It is also confirmed by the code in drivers/char/mem.c. If you > want to access anything beyond 'high_memory", nothing is read. Yep, you may only use read()/write() for system RAM. For other areas you have to mmap() the interesting part of /dev/mem and then access it directly (which is easier and better anyway, as you may control the width of bus transfers -- not all MMIO devices support all widths). > Note that drivers/char/mem.c is cross-platform code. I am not sure how X > would access video memory through /dev/mem on either MIPS or other platforms. It mmap()s the areas it's interested in. Read the code! > That reason I want to fix /dev/kmem is that in some cases before a driver is > written people want to play with the hardware directly from the userland > (especially for demo purpose. :-0) Very useful for embedded systems. I'm not sure how to use /dev/kmem for this purpose -- it's kernel's *virtual* memory... > Potentially fixing /dev/mem can do the same job. However /dev/mem cannot > differentiate cached or uncached accesses. With /dev/kmem, we just specify > 0x8.. or 0xa.... Yep, /dev/mem for non system RAM areas is always uncached which is what is almost always desired (for system RAM areas you may request uncacheability by passing O_SYNC when opening the file). Anyway, /dev/mem works great -- I've successfully used it to access APICs (at 0xfec00000 and 0xfee00000) in my i386 system and various stuff (an NVRAM at 0x1c000000, a graphics accelerator at 0x1e000000, a FDDI network controller at 0x1f000000, onboard I/O stuff at 0x1f800000 and a system ROM at 0x1fc00000) in my DECstation. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Mon Dec 11 11:45:59 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 11:45:39 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:45572 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Mon, 11 Dec 2000 11:45:33 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Mon, 11 Dec 2000 14:44:26 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Mon, 11 Dec 2000 14:44:26 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209F41@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: two things Date: Mon, 11 Dec 2000 14:44:48 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing two things: can the distribution Hard Hat linux be burned to a cd that will boot an SGI, or is there a dist i can burn to a cd and make it a bootable cd? i'm ne wat this and i want to have a bootable cd if that's possible. and, will this monitor work with an SGI, specifically an Indy? SUN GDM-1662B high resolution, fixed frequency monitor. The monitor uses a 13W-3 video connector. 16" viewable image .26mm dot pitch H Frequency: 67 V Frequency: 71.7 Hz Sync Signal: Composite Maximum Resolution: 1280 x 1024 thanks, Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Mon Dec 11 12:06:38 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 12:06:28 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:14857 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 12:06:23 -0800 Received: from bilbo.physik.uni-konstanz.de [134.34.144.81] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 145ZDJ-0005EQ-00; Mon, 11 Dec 2000 21:06:21 +0100 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 145ZDJ-0008Rx-00; Mon, 11 Dec 2000 21:06:21 +0100 Date: Mon, 11 Dec 2000 21:06:21 +0100 From: Guido Guenther To: linux-mips@oss.sgi.com Subject: latest xfree86 Message-ID: <20001211210621.A32448@bilbo.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, AFAIK the folks at xfree86 are about to release a new version of X quiet soon now. Since this will include the newport driver we ''indy folks'' should be able to build xfree86 without additional patches from now on. Could someone please check this? - it worked for me at last. How to obtain latest XFree-cvs is described at: http://sunsite.org.uk/XFree86/cvs/ Xnest is currently not building so you might want to add: '#define XnestServer NO' to your xc/config/cf/host.def when building form source(or figure out why the build fails :). I'll additionally uploaded a precompiled tarball to: http://honk.physik.uni-konstanz.de/linux-mips/x/test/ You can simply untar it in / and run ldconfig afterwards. I'd be glad if someone could check out this one too. Regards, -- Guido From owner-linux-mips@oss.sgi.com Mon Dec 11 14:17:09 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 14:16:59 -0800 Received: from hybrid-024-221-181-223.ca.sprintbbd.net ([24.221.181.223]:58609 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 14:16:41 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBBNCIS29713; Mon, 11 Dec 2000 15:12:18 -0800 Message-ID: <3A35C2CE.2CF718D6@mvista.com> Date: Mon, 11 Dec 2000 22:16:46 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Maciej W. Rozycki" CC: Guido Guenther , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Maciej W. Rozycki" wrote: > > On Mon, 11 Dec 2000, Jun Sun wrote: > > > I am surprised. I thought /dev/mem is for accessing SYSTEM RAM. (do a 'man' > > You access the memory space. Whatever is found at the address you > specify, be it RAM, an MMIO area or unoccupied space. You may receive a > bus error in the latter case (depending on a system configuration). > > > on /dev/mem) It is also confirmed by the code in drivers/char/mem.c. If you > > want to access anything beyond 'high_memory", nothing is read. > > Yep, you may only use read()/write() for system RAM. For other areas you > have to mmap() the interesting part of /dev/mem and then access it > directly (which is easier and better anyway, as you may control the width > of bus transfers -- not all MMIO devices support all widths). > I see. It is funny that you cannot read/write memory beyond high_memory through /dev/mem, but you can re-map it and then read/write through the remapped region. How do you control the width of bus transfers? If you have direct access to the device memory, the userland "drivers" should be able to deal with the bus access width correctly. > > That reason I want to fix /dev/kmem is that in some cases before a driver is > > written people want to play with the hardware directly from the userland > > (especially for demo purpose. :-0) Very useful for embedded systems. > > I'm not sure how to use /dev/kmem for this purpose -- it's kernel's > *virtual* memory... > kseg0 and kseg1 are part of kernel virtual memory space. If we implement /dev/kmem correctly, one should be able to directly read/write those area by specifying 0x80000000 or 0xa0000000 offsets through /dev/kmem. Jun From owner-linux-mips@oss.sgi.com Mon Dec 11 15:36:38 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 15:36:29 -0800 Received: from hybrid-024-221-181-223.ca.sprintbbd.net ([24.221.181.223]:17648 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 15:36:13 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBC0Y8S00995; Mon, 11 Dec 2000 16:34:08 -0800 Message-ID: <3A35D5FC.11372085@mvista.com> Date: Mon, 11 Dec 2000 23:38:36 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? References: <3A3051C1.DCFC749B@mvista.com> <20001209003222.A10669@bacchus.dhis.org> Content-Type: multipart/mixed; boundary="------------F2A825EFF85ED6D50B0B9820" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------F2A825EFF85ED6D50B0B9820 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Ralf Baechle wrote: > > Send me the patch and I'll comment. > > Ralf Here is my patch. I think it should be safe for mips64. Please double check it. Jun --------------F2A825EFF85ED6D50B0B9820 Content-Type: text/plain; charset=us-ascii; name="linux-mips-kmem-kseg.patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="linux-mips-kmem-kseg.patch" diff -Nru linux/drivers/char/mem.c.orig linux/drivers/char/mem.c --- linux/drivers/char/mem.c.orig Mon Dec 11 22:07:19 2000 +++ linux/drivers/char/mem.c Mon Dec 11 22:38:11 2000 @@ -258,6 +258,14 @@ count -= read; } +#if defined(__mips__) + if (KSEGX(p)) { + if (copy_to_user(buf, (char*)p, count)) + return -EFAULT; + return count+read; + } +#endif + kbuf = (char *)__get_free_page(GFP_KERNEL); if (!kbuf) return -ENOMEM; @@ -288,6 +296,12 @@ size_t count, loff_t *ppos) { unsigned long p = *ppos; + +#if defined(__mips__) + if (KSEGX(p)) { + return do_write_mem(file, (void*)p, p, buf, count, ppos); + } +#endif if (p >= (unsigned long) high_memory) return 0; --------------F2A825EFF85ED6D50B0B9820-- From owner-linux-mips@oss.sgi.com Mon Dec 11 20:09:40 2000 Received: by oss.sgi.com id ; Mon, 11 Dec 2000 20:09:19 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:19698 "EHLO lappi") by oss.sgi.com with ESMTP id ; Mon, 11 Dec 2000 20:08:53 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Mon, 11 Dec 2000 21:07:25 -0700 Date: Tue, 12 Dec 2000 05:07:25 +0100 From: Ralf Baechle To: Carsten Langgaard Cc: linux-mips@oss.sgi.com Subject: Re: Crosscompiler Message-ID: <20001212050724.A517@bacchus.dhis.org> References: <3A34D621.51AB8654@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A34D621.51AB8654@mips.com>; from carstenl@mips.com on Mon, Dec 11, 2000 at 02:26:57PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 11, 2000 at 02:26:57PM +0100, Carsten Langgaard wrote: > Where can I find a precompiled crosscompiler for mips 64 little endian ? > > I coundn't find any under > ftp://oss.sgi.com/pub/linux/mips/crossdev/i386-linux/ Correct - because I simply didn't build one. With no supported system there plain wasn't any reason to. Anyway, it's a mostly automatic process to brew one for you, so hold your breath. But only if you're really good at it :-) Ralf From owner-linux-mips@oss.sgi.com Tue Dec 12 01:35:41 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 01:35:32 -0800 Received: from mx.mips.com ([206.31.31.226]:52138 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Tue, 12 Dec 2000 01:35:27 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA21707; Tue, 12 Dec 2000 01:35:24 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id BAA17577; Tue, 12 Dec 2000 01:35:22 -0800 (PST) Received: from mips.com (coppccl [172.17.27.2]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id KAA19637; Tue, 12 Dec 2000 10:34:58 +0100 (MET) Message-ID: <3A35F0CE.6A6D1BA4@mips.com> Date: Tue, 12 Dec 2000 10:33:03 +0100 From: Carsten Langgaard Organization: MIPS X-Mailer: Mozilla 4.72 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: Crosscompiler References: <3A34D621.51AB8654@mips.com> <20001212050724.A517@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > On Mon, Dec 11, 2000 at 02:26:57PM +0100, Carsten Langgaard wrote: > > > Where can I find a precompiled crosscompiler for mips 64 little endian ? > > > > I coundn't find any under > > ftp://oss.sgi.com/pub/linux/mips/crossdev/i386-linux/ > > Correct - because I simply didn't build one. With no supported system there > plain wasn't any reason to. Anyway, it's a mostly automatic process to > brew one for you, so hold your breath. But only if you're really good > at it :-) Ok, thanks. I will try to hold my breath as long as I can, meanwhile I will go and do some Christmas shopping, which definitely are breath taking :-) > > Ralf From owner-linux-mips@oss.sgi.com Tue Dec 12 04:06:03 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 04:05:43 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:24739 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 12 Dec 2000 04:05:22 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id MAA10843; Tue, 12 Dec 2000 12:58:19 +0100 (MET) Date: Tue, 12 Dec 2000 12:58:18 +0100 (MET) From: "Maciej W. Rozycki" To: Jun Sun cc: Guido Guenther , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? In-Reply-To: <3A35C2CE.2CF718D6@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 11 Dec 2000, Jun Sun wrote: > I see. It is funny that you cannot read/write memory beyond high_memory > through /dev/mem, but you can re-map it and then read/write through the > remapped region. I see it consistent. The system memory can be treated like a stream of bytes. That's much like any random-access file. Other devices do not necessarily exhibit this behaviour. They may implement side effects, values read may be different from what was written previously. You may even achieve different effects by performing transfers of different widths. > How do you control the width of bus transfers? If you have direct access to > the device memory, the userland "drivers" should be able to deal with the bus > access width correctly. If you declare a location int32_t, gcc will perform a 32-bit access on assignment (lw/sw for MIPS). If you declare a location int16_t, gcc will perform a 16-bit access (lh/sh for MIPS). Ditto for int8_t (and for int64_t for 64-bit configurations). Names of types do not matter, of course, sizeof -- does. I just used the ISO C portable names for fixed-size types. Please note you might need to use the "volatile" keyword or gcc might reorder or even optimize out certain accesses. > kseg0 and kseg1 are part of kernel virtual memory space. If we implement > /dev/kmem correctly, one should be able to directly read/write those area by > specifying 0x80000000 or 0xa0000000 offsets through /dev/kmem. But this is highly unportable. MIPS has trivially mapped virtual memory areas but many (most?) architectures do not. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Dec 12 05:34:03 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 05:33:54 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:50852 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 12 Dec 2000 05:33:41 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA14345; Tue, 12 Dec 2000 14:23:48 +0100 (MET) Date: Tue, 12 Dec 2000 14:23:47 +0100 (MET) From: "Maciej W. Rozycki" To: Jun Sun cc: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? In-Reply-To: <3A35D5FC.11372085@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 11 Dec 2000, Jun Sun wrote: > Here is my patch. I think it should be safe for mips64. Please double check > it. I don't think we should allow access to non page-mapped areas as well as read()/write() for non-memory areas. That would be inconsistent with the idea of /dev/kmem and the implementation for other ports. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Dec 12 06:36:34 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 06:36:24 -0800 Received: from router.isratech.ro ([193.226.114.69]:42764 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Tue, 12 Dec 2000 06:36:16 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBCEZt819477 for ; Tue, 12 Dec 2000 16:35:55 +0200 Message-ID: <3A36A638.A7F1D249@isratech.ro> Date: Tue, 12 Dec 2000 17:27:04 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: INITRD. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have an QED mips processor running on an Atlas Board and I want to make an initrd for this board. Can you tell me if this is possible ? Another thing is that I want to make it stay into the SRAM area. Can I do that ? We want to put the initrd into the Flash area but the linux itself can not run from FLASH. So if ytou have any ideea please point me in the right direction. Regards, Nicu From owner-linux-mips@oss.sgi.com Tue Dec 12 08:53:44 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 08:53:34 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:28943 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Tue, 12 Dec 2000 08:53:15 -0800 Received: from legolas.physik.uni-konstanz.de [134.34.144.84] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 145sfx-0006N0-00; Tue, 12 Dec 2000 17:53:13 +0100 Received: from agx by legolas.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 145sft-0006Ia-00; Tue, 12 Dec 2000 17:53:09 +0100 Date: Tue, 12 Dec 2000 17:53:09 +0100 From: Guido Guenther To: linux-mips@oss.sgi.com Subject: Re: latest xfree86 Message-ID: <20001212175309.A24195@legolas.physik.uni-konstanz.de> References: <20001211210621.A32448@bilbo.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001211210621.A32448@bilbo.physik.uni-konstanz.de>; from guido.guenther@gmx.net on Mon, Dec 11, 2000 at 09:06:21PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 11, 2000 at 09:06:21PM +0100, Guido Guenther wrote: > Xnest is currently not building so you might want to add: > '#define XnestServer NO' to your xc/config/cf/host.def when building > form source(or figure out why the build fails :). Has been fixed. Patch can be found at: http://honk/linux-mips/x/test/xnest.diff -- Guido From owner-linux-mips@oss.sgi.com Tue Dec 12 11:06:54 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 11:06:35 -0800 Received: from hybrid-024-221-181-223.ca.sprintbbd.net ([24.221.181.223]:57852 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Tue, 12 Dec 2000 11:06:04 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBCJnsS03207; Tue, 12 Dec 2000 11:49:54 -0800 Message-ID: <3A36743C.77A7651E@mvista.com> Date: Tue, 12 Dec 2000 10:53:48 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Maciej W. Rozycki" CC: Guido Guenther , linux-mips@oss.sgi.com Subject: Re: Should /dev/kmem support above 0x80000000 area? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Maciej W. Rozycki" wrote: > > On Mon, 11 Dec 2000, Jun Sun wrote: > > > I see. It is funny that you cannot read/write memory beyond high_memory > > through /dev/mem, but you can re-map it and then read/write through the > > remapped region. > > I see it consistent. The system memory can be treated like a stream of > bytes. That's much like any random-access file. Other devices do not > necessarily exhibit this behaviour. They may implement side effects, > values read may be different from what was written previously. You may > even achieve different effects by performing transfers of different > widths. > > > How do you control the width of bus transfers? If you have direct access to > > the device memory, the userland "drivers" should be able to deal with the bus > > access width correctly. > > If you declare a location int32_t, gcc will perform a 32-bit access on > assignment (lw/sw for MIPS). If you declare a location int16_t, gcc will > perform a 16-bit access (lh/sh for MIPS). Ditto for int8_t (and for > int64_t for 64-bit configurations). Names of types do not matter, of > course, sizeof -- does. I just used the ISO C portable names for > fixed-size types. Please note you might need to use the "volatile" > keyword or gcc might reorder or even optimize out certain accesses. > I see the point now. It is not such a good idea to map IO memory through a file API, especially given that we have a working /dev/mem. Ralf, I "officially" retract my previous patch. Jun From owner-linux-mips@oss.sgi.com Tue Dec 12 15:08:18 2000 Received: by oss.sgi.com id ; Tue, 12 Dec 2000 15:08:08 -0800 Received: from pop3.web.de ([212.227.116.81]:22031 "HELO smtp.web.de") by oss.sgi.com with SMTP id ; Tue, 12 Dec 2000 15:07:52 -0800 Received: from web.de by smtp.web.de with smtp (freemail 4.2.1.0 #3) id m145yWT-005QEIC; Wed, 13 Dec 2000 00:07 +0100 Message-ID: <3A36AFFE.51C9F2B@web.de> Date: Wed, 13 Dec 2000 00:08:46 +0100 From: Olaf Zaplinski X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: de,en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: FAQ/ Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi all, can someone please point me to a Howto/FAQ? I'd like to put Linux on my SNI RM200 machine (R4600, 64MB). Can I use the Hardhat distribution, or does it run on SGIs only? Olaf From owner-linux-mips@oss.sgi.com Wed Dec 13 02:24:53 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 02:24:42 -0800 Received: from router.isratech.ro ([193.226.114.69]:260 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 13 Dec 2000 02:24:25 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBD9p2823280 for ; Wed, 13 Dec 2000 11:53:47 +0200 Message-ID: <3A37B34B.69C1BF2@isratech.ro> Date: Wed, 13 Dec 2000 12:35:07 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: YAMON. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello , Does anyone know how can I do to start a Linux on a mips board ( ATLAS ) without using YAMON. I just want to turn on the mips and to boot in Linux . Is that possible ? Regards, Nicu From owner-linux-mips@oss.sgi.com Wed Dec 13 05:08:13 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 05:08:03 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:5395 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Wed, 13 Dec 2000 05:07:42 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id B1E7B7FF; Wed, 13 Dec 2000 14:07:39 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 87D5B8F74; Wed, 13 Dec 2000 13:57:23 +0100 (CET) Date: Wed, 13 Dec 2000 13:57:23 +0100 From: Florian Lohoff To: Olaf Zaplinski Cc: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001213135723.B3060@paradigm.rfc822.org> References: <3A36AFFE.51C9F2B@web.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A36AFFE.51C9F2B@web.de>; from olaf.zaplinski@web.de on Wed, Dec 13, 2000 at 12:08:46AM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Dec 13, 2000 at 12:08:46AM +0100, Olaf Zaplinski wrote: > Hi all, > > can someone please point me to a Howto/FAQ? I'd like to put Linux on my SNI > RM200 machine (R4600, 64MB). Can I use the Hardhat distribution, or does it > run on SGIs only? The RM200 was supported only in little endian mode with the Windows NT firmware - Nobody knows (chance is little) if the tree will still work. You will need the decstation root not the hardhat tarball as that is strictly big endian. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Wed Dec 13 07:59:53 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 07:59:33 -0800 Received: from mx.mips.com ([206.31.31.226]:45499 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 13 Dec 2000 07:59:22 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id HAA03827 for ; Wed, 13 Dec 2000 07:59:19 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id HAA02263 for ; Wed, 13 Dec 2000 07:59:16 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id QAA18353 for ; Wed, 13 Dec 2000 16:58:52 +0100 (MET) Message-ID: <3A379CBC.ED1D9F@mips.com> Date: Wed, 13 Dec 2000 16:58:52 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: 64 bit build fails Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I'm trying to build a 64bit kernel, but it fails with following message: mips64-linux-gcc -D__KERNEL__ -I/home/soc/proj/work/carstenl/sw/linux-2.4.0/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing -mabi=64 -G 0 -mno-abicalls -fno-pic -Wa,--trap -pipe -mcpu=r8000 -mips4 -Wa,-32 -c head.S -o head.o head.S: Assembler messages: head.S:69: Error: Missing ')' assumed head.S:69: Error: Missing ')' assumed head.S:69: Error: Missing ')' assumed head.S:69: Error: Missing ')' assumed head.S:69: Error: Missing ')' assumed head.S:69: Error: Missing ')' assumed head.S:69: Error: illegal operands `dli' head.S:107: Error: Missing ')' assumed head.S:107: Error: Missing ')' assumed head.S:107: Error: Missing ')' assumed head.S:107: Error: Missing ')' assumed head.S:107: Error: Missing ')' assumed head.S:107: Error: Missing ')' assumed head.S:107: Error: illegal operands `dli' head.S:109: Error: Instruction dsll requires absolute expression head.S:109: Error: Instruction dsll requires absolute expression make[1]: *** [head.o] Error 1 make[1]: Leaving directory `/home/soc/proj/work/carstenl/sw/linux-2.4.0/arch/mips64/kernel' make: *** [_dir_arch/mips64/kernel] Error 2 What are this macro doing ? .macro GET_NASID_ASM dli t1, LOCAL_HUB_ADDR(NI_STATUS_REV_ID) ld t1, (t1) and t1, NSRI_NODEID_MASK dsrl t1, NSRI_NODEID_SHFT .endm /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Wed Dec 13 09:06:53 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 09:06:33 -0800 Received: from jester.ti.com ([192.94.94.1]:28824 "EHLO jester.ti.com") by oss.sgi.com with ESMTP id ; Wed, 13 Dec 2000 09:06:07 -0800 Received: from dlep7.itg.ti.com ([157.170.134.103]) by jester.ti.com (8.11.1/8.11.1) with ESMTP id eBDH61923339; Wed, 13 Dec 2000 11:06:01 -0600 (CST) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id LAA00569; Wed, 13 Dec 2000 11:06:01 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id LAA00555; Wed, 13 Dec 2000 11:06:01 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.194]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id LAA01896; Wed, 13 Dec 2000 11:06:00 -0600 (CST) Message-ID: <3A37ACC9.82476B96@ti.com> Date: Wed, 13 Dec 2000 10:07:21 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: YAMON. References: <3A37B34B.69C1BF2@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Nicu Popovici wrote: > Hello , > > Does anyone know how can I do to start a Linux on a mips board ( ATLAS ) > without using YAMON. I just want to turn on the mips and to boot in > Linux . Is that possible ? > > Regards, > Nicu It is possible. Look in Atlas Users Manual Sec 5.2 . Dip switch S1-1 controls booting from either Monitor Flash or System Flash. If you boot from System Flash then the monitor is effectively removed. You would of course have to have your own boot-up code, PCI enumerator, hardware init, kernel loader, kernel image, etc. in the System Flash all hooked to the reset vector for this to work. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Wed Dec 13 09:50:23 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 09:50:14 -0800 Received: from pop.mainstreet.net ([207.5.0.4]:7891 "EHLO pop.mainstreet.net") by oss.sgi.com with ESMTP id ; Wed, 13 Dec 2000 09:49:49 -0800 Received: from innovisiontv.com ([63.100.187.130]) by pop.mainstreet.net (8.9.2/8.9.2) with ESMTP id JAA29941 for ; Wed, 13 Dec 2000 09:49:37 -0800 (PST) Message-ID: <3A37B69E.1A8A2598@innovisiontv.com> Date: Wed, 13 Dec 2000 09:49:18 -0800 From: Glenn Serre X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16-22 i686) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: Tips, HOWTOs or FAQs for starting a new platform? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Good morning, I've recently started a port to a new platform that includes an R3000 MIPS processor and a bunch of IO on a single chip, and I'm wondering anyone else on the list who has done that same can point me to any particularly-helpful HOWTOs, FAQs, tips, other other docs. In particular, I'm looking for information on the arch-specific parts of the kernel. Thanks, --Glenn Serre gaserre@innovisiontv.com From owner-linux-mips@oss.sgi.com Wed Dec 13 12:24:03 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 12:23:43 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:28863 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 13 Dec 2000 12:23:11 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id VAA17013; Wed, 13 Dec 2000 21:16:41 +0100 (MET) Date: Wed, 13 Dec 2000 21:16:40 +0100 (MET) From: "Maciej W. Rozycki" To: Guido Guenther cc: linux-mips@oss.sgi.com Subject: Re: latest xfree86 In-Reply-To: <20001212175309.A24195@legolas.physik.uni-konstanz.de> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 12 Dec 2000, Guido Guenther wrote: > Has been fixed. Patch can be found at: > http://honk/linux-mips/x/test/xnest.diff Hmm, I guess the URL won't work for everyone -- could you please check what's missing? -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Dec 13 23:21:19 2000 Received: by oss.sgi.com id ; Wed, 13 Dec 2000 23:21:08 -0800 Received: from router.isratech.ro ([193.226.114.69]:20746 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 13 Dec 2000 23:20:41 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBE7K9815583; Thu, 14 Dec 2000 09:20:10 +0200 Message-ID: <3A38E314.A22393DD@isratech.ro> Date: Thu, 14 Dec 2000 10:11:16 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Brady Brown CC: linux-mips@oss.sgi.com Subject: Re: YAMON. References: <3A37B34B.69C1BF2@isratech.ro> <3A37ACC9.82476B96@ti.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello , Thanks . Now I have a much bigger problem. I have to try to start this ATLAS board without a HDD and without ethernet. At reset it should give me a login prompt which I have to see throught the console. Can anyone help me ? Regards Nicu Brady Brown wrote: > Nicu Popovici wrote: > > > Hello , > > > > Does anyone know how can I do to start a Linux on a mips board ( ATLAS ) > > without using YAMON. I just want to turn on the mips and to boot in > > Linux . Is that possible ? > > > > Regards, > > Nicu > > It is possible. Look in Atlas Users Manual Sec 5.2 . Dip switch S1-1 > controls booting from either Monitor Flash or System Flash. If you boot > from System Flash then the monitor is effectively removed. You would of > course have to have your own boot-up code, PCI enumerator, hardware init, > kernel loader, kernel image, etc. in the System Flash all hooked to the > reset vector for this to work. > > -- > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Brady Brown (bbrown@ti.com) Work:(801)619-6103 > Texas Instruments: Broadband Access Group > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Thu Dec 14 03:05:59 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 03:05:39 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:44044 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 03:05:18 -0800 Received: from gimli.physik.uni-konstanz.de [134.34.144.85] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 146WB4-0007rN-00; Thu, 14 Dec 2000 12:03:58 +0100 Received: from agx by gimli.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 146WB0-0001Ae-00; Thu, 14 Dec 2000 12:03:54 +0100 Date: Thu, 14 Dec 2000 12:03:54 +0100 From: Guido Guenther To: "Maciej W. Rozycki" Cc: linux-mips@oss.sgi.com Subject: Re: latest xfree86 Message-ID: <20001214120354.A4470@gimli.physik.uni-konstanz.de> References: <20001212175309.A24195@legolas.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from macro@ds2.pg.gda.pl on Wed, Dec 13, 2000 at 09:16:40PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Dec 13, 2000 at 09:16:40PM +0100, Maciej W. Rozycki wrote: > On Tue, 12 Dec 2000, Guido Guenther wrote: > > > Has been fixed. Patch can be found at: > > http://honk/linux-mips/x/test/xnest.diff > > Hmm, I guess the URL won't work for everyone -- could you please check > what's missing? Silly me... http://honk.physik.uni-konstanz.de/linux-mips/x/test/xnest.diff > > -- > + Maciej W. Rozycki, Technical University of Gdansk, Poland + > +--------------------------------------------------------------+ > + e-mail: macro@ds2.pg.gda.pl, PGP key available + > From owner-linux-mips@oss.sgi.com Thu Dec 14 09:10:00 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 09:09:50 -0800 Received: from tower.ti.com ([192.94.94.5]:29927 "EHLO tower.ti.com") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 09:09:25 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by tower.ti.com (8.11.1/8.11.1) with ESMTP id eBEH9I912041; Thu, 14 Dec 2000 11:09:18 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id LAA16637; Thu, 14 Dec 2000 11:09:17 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id LAA16614; Thu, 14 Dec 2000 11:09:16 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.194]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id LAA26485; Thu, 14 Dec 2000 11:09:15 -0600 (CST) Message-ID: <3A38FF12.9311F835@ti.com> Date: Thu, 14 Dec 2000 10:10:42 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: YAMON. References: <3A37B34B.69C1BF2@isratech.ro> <3A37ACC9.82476B96@ti.com> <3A38E314.A22393DD@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Nicu Popovici wrote: > Hello , > > Thanks . Now I have a much bigger problem. I have to try to start this ATLAS > board without a HDD and without ethernet. At reset it should give me a login > prompt which I have to see throught the console. Can anyone help me ? One possibility: you basically need to write a kernel loader that lives in Flash and is called at the very end of the boot-up code that replaces YAMON. Additionally in flash is then a compressed kernel image and a compressed file-system image. Your kernel loader inflates the kernel into RAM, then jumps to the start of the kernel. The kernel then takes over. It is built to support a ram-disk (size depending upon the size of your uncompressed file-system). So the kernel inflates the file-system into the ram-disk and then mounts it as root and continues with normal boot up. You can borrow much of the inflater code within the kernel to generate the stand alone kernel loader. You will also need to modify the ram-disk code so that it knows how to find the file-system image in your flash. A fair bit of work, but certainly possible. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Thu Dec 14 09:55:51 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 09:55:31 -0800 Received: from web1.lanscape.net ([64.240.156.194]:31756 "EHLO web1.lanscape.net") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 09:55:02 -0800 Received: (from tbm@localhost) by web1.lanscape.net (8.9.3/8.9.3) id LAA10405 for linux-mips@oss.sgi.com; Thu, 14 Dec 2000 11:54:51 -0600 Date: Thu, 14 Dec 2000 11:54:51 -0600 From: Martin Michlmayr To: linux-mips@oss.sgi.com Subject: Cannot type on DECstation prom Message-ID: <20001214115451.A10322@web1.lanscape.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I recently got a DECstation 5000/125 and I'm trying to get Linux to run. I'm using minicom and while I get output from the machine, I can not type anything on the prom. When I power the machine on, I get: KN02-BA V5.7e ?TFL: #0 PMAGB-BA PATT: 5: Red screen Test 3/misc/kbd ?STF (4: Ln#0 Kbd self test) 3/misc/mouse ?STF (4: Ln#1 Pntr self test) >> When I type anything, nothing happens at all. When I press the reset button (or whatever it's called), the machine boots NetBSD: V5.7e (PC: 0xbfc00cbc, SP: 0xa000feb4) >> NetBSD/pmax Secondary Boot, Revision 1.0 >> (root@vlad, Sat Mar 4 14:34:30 EST 2000) Boot: 3/rz2/netbsd The funny thing is that I _can_ type when NetBSD is being started. But nothing happens on the prom. What can I do? FWIW, dmesg on NetBSD says: DECstation 5000/125 (3MIN) real mem = 33554432 avail mem = 27136000 using 819 buffers containing 3354624 bytes of memory mainbus0 (root) cpu0 at mainbus0: cpu0: MIPS R3000 CPU Rev. 3.0 with MIPS R3010 FPC Rev. 3.0 -- Martin Michlmayr tbm@cyrius.com From owner-linux-mips@oss.sgi.com Thu Dec 14 10:30:51 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 10:30:41 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:38406 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 10:30:15 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXPF643VDO0017QU@research.kpn.com> for linux-mips@oss.sgi.com; Thu, 14 Dec 2000 19:30:13 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id TAA01589; Thu, 14 Dec 2000 19:30:12 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Thu, 14 Dec 2000 19:30:12 +0100 (MET) From: Karel van Houten Subject: Re: Cannot type on DECstation prom In-reply-to: <20001214115451.A10322@web1.lanscape.net> To: tbm@lanscape.net (Martin Michlmayr) Cc: linux-mips@oss.sgi.com Message-id: <200012141830.TAA01589@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > I recently got a DECstation 5000/125 and I'm trying to get Linux to run. > I'm using minicom and while I get output from the machine, I can not > type anything on the prom. When I power the machine on, I get: > > ..... > > The funny thing is that I _can_ type when NetBSD is being started. But > nothing happens on the prom. > These DECStations require full modem control signals on the prom console. I would build a D25 serial modem-faker cable: 1 ------------------- 1 2 -------\ /--------- 2 X 3 -------/ \--------- 3 4 -+ +- 4 | | 5 -+ +- 5 6 -+ +- 6 | | 7 -)---------------)- 7 | | 8 -+ +- 8 | | 20 -+ +- 20 This should work. -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Thu Dec 14 10:52:51 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 10:52:41 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:62157 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 10:52:28 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id TAA28089; Thu, 14 Dec 2000 19:44:52 +0100 (MET) Date: Thu, 14 Dec 2000 19:44:50 +0100 (MET) From: "Maciej W. Rozycki" To: Martin Michlmayr cc: linux-mips@oss.sgi.com Subject: Re: Cannot type on DECstation prom In-Reply-To: <20001214115451.A10322@web1.lanscape.net> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 14 Dec 2000, Martin Michlmayr wrote: > I recently got a DECstation 5000/125 and I'm trying to get Linux to run. > I'm using minicom and while I get output from the machine, I can not > type anything on the prom. When I power the machine on, I get: Due to historic reasons (DEC 6-pin MMJ connectors) DECstation firmware only use DTR/DSR hw handshaking on their serial consoles. You may either change the wiring (not recommended), use XON/XOFF handshaking or disable handhaking altogether when talking to the firmware. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Dec 14 10:54:51 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 10:54:31 -0800 Received: from mail.ivm.net ([62.204.1.4]:13574 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 10:54:20 -0800 Received: from franz.no.dom (port112.duesseldorf.ivm.de [195.247.65.112]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id TAA08396; Thu, 14 Dec 2000 19:54:02 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <3A38E314.A22393DD@isratech.ro> Date: Sat, 22 Feb 2003 09:55:11 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Nicu Popovici Subject: Re: YAMON. Cc: linux-mips@oss.sgi.com, Brady Brown Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 14-Dec-00 Nicu Popovici wrote: > Thanks . Now I have a much bigger problem. I have to try to start this ATLAS > board without a HDD and without ethernet. At reset it should give me a login > prompt which I have to see throught the console. Can anyone help me ? The linux-vr tree has a nice feature called XIP (eXecute In Place). This allows to prepare a kernel to run directly out of ROM. http://linuxvr-org if that's what you're looking for. -- Regards, Harald From owner-linux-mips@oss.sgi.com Thu Dec 14 11:00:11 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 10:59:51 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:4046 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 10:59:44 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id TAA28285; Thu, 14 Dec 2000 19:49:39 +0100 (MET) Date: Thu, 14 Dec 2000 19:49:38 +0100 (MET) From: "Maciej W. Rozycki" To: Karel van Houten cc: Martin Michlmayr , linux-mips@oss.sgi.com Subject: Re: Cannot type on DECstation prom In-Reply-To: <200012141830.TAA01589@sparta.research.kpn.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 14 Dec 2000, Karel van Houten wrote: > These DECStations require full modem control signals on the > prom console. I would build a D25 serial modem-faker cable: > > 1 ------------------- 1 > > 2 -------\ /--------- 2 > X > 3 -------/ \--------- 3 > > 4 -+ +- 4 > | | > 5 -+ +- 5 > > 6 -+ +- 6 > | | > 7 -)---------------)- 7 > | | > 8 -+ +- 8 > | | > 20 -+ +- 20 > > This should work. It would work for firmware, but it would break for RTS/CTS hanshaking (the standard one these days). At 9600bps you may well live with it, but for anything faster you'll likely lose characters. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Dec 14 13:02:31 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 13:02:22 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:65263 "EHLO lappi") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 13:01:58 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Thu, 14 Dec 2000 13:59:33 -0700 Date: Thu, 14 Dec 2000 21:59:33 +0100 From: Ralf Baechle To: Carsten Langgaard Cc: linux-mips@oss.sgi.com Subject: Re: 64 bit build fails Message-ID: <20001214215933.C28871@bacchus.dhis.org> References: <3A379CBC.ED1D9F@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A379CBC.ED1D9F@mips.com>; from carstenl@mips.com on Wed, Dec 13, 2000 at 04:58:52PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Dec 13, 2000 at 04:58:52PM +0100, Carsten Langgaard wrote: > I'm trying to build a 64bit kernel, but it fails with following message: > > mips64-linux-gcc -D__KERNEL__ > -I/home/soc/proj/work/carstenl/sw/linux-2.4.0/include -Wall > -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing > -mabi=64 -G 0 -mno-abicalls -fno-pic -Wa,--trap -pipe -mcpu=r8000 -mips4 > -Wa,-32 -c head.S -o head.o > head.S: Assembler messages: > head.S:69: Error: Missing ')' assumed Looks like an attempt to build a 64-bit Indy kernel. Various people working on the Origin support have completly broken the support for anything else in their battle tank-style approach ... Ralf From owner-linux-mips@oss.sgi.com Thu Dec 14 14:17:02 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 14:16:52 -0800 Received: from mta3-rme.xtra.co.nz ([203.96.92.13]:44381 "EHLO mta3-rme.xtra.co.nz") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 14:16:40 -0800 Received: from server1.metering.co.nz ([210.55.57.194]) by mta3-rme.xtra.co.nz with ESMTP id <20001214221633.WNHI8799530.mta3-rme.xtra.co.nz@server1.metering.co.nz> for ; Fri, 15 Dec 2000 11:16:33 +1300 Received: by server1.metering.co.nz with Internet Mail Service (5.5.2650.21) id ; Fri, 15 Dec 2000 11:16:32 +1300 Message-ID: <8BEF9F7FD6FEA8409D2A706B2D6D32280553FF@server1.metering.co.nz> From: Pete Black To: "'linux-mips@oss.sgi.com'" Subject: Linux/MIPS on quad-R4400 Challenge L Date: Fri, 15 Dec 2000 11:16:31 +1300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi there, I happen to have acquired a quad-R4400 SGI Challenge-L server. It's big, it's black, and it seems to run OK. Is there any support in Linux/MIPS for a beast like this? Its currently running IRIX 6.5.9 quite happily, but i'd much rather run Linux, since then i have a standard OS across all my machines, and no hefty SGI taxes to pay. >From what i read on the FAQs, the Multi-processor versions of the R4400 are not supported.. will there ever be a time when Linux/MIPS will run on a machin elike this, or am i stuck with IRIX for the rest of this machine's life? Thanks -Pete From owner-linux-mips@oss.sgi.com Thu Dec 14 23:46:30 2000 Received: by oss.sgi.com id ; Thu, 14 Dec 2000 23:46:10 -0800 Received: from mx.mips.com ([206.31.31.226]:6359 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 14 Dec 2000 23:46:07 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id XAA13746; Thu, 14 Dec 2000 23:46:03 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id XAA04770; Thu, 14 Dec 2000 23:46:01 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id IAA17020; Fri, 15 Dec 2000 08:45:36 +0100 (MET) Message-ID: <3A39CC1F.8FE7B2FE@mips.com> Date: Fri, 15 Dec 2000 08:45:35 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: 64 bit build fails References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > On Wed, Dec 13, 2000 at 04:58:52PM +0100, Carsten Langgaard wrote: > > > I'm trying to build a 64bit kernel, but it fails with following message: > > > > mips64-linux-gcc -D__KERNEL__ > > -I/home/soc/proj/work/carstenl/sw/linux-2.4.0/include -Wall > > -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing > > -mabi=64 -G 0 -mno-abicalls -fno-pic -Wa,--trap -pipe -mcpu=r8000 -mips4 > > -Wa,-32 -c head.S -o head.o > > head.S: Assembler messages: > > head.S:69: Error: Missing ')' assumed > > Looks like an attempt to build a 64-bit Indy kernel. Various people working > on the Origin support have completly broken the support for anything else in > their battle tank-style approach ... Ok, that explains why a lot of things are broken. So who will be responsible for fixing all the broken pieces ? > > Ralf -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Fri Dec 15 00:21:30 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 00:21:20 -0800 Received: from mx.mips.com ([206.31.31.226]:20695 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 00:21:07 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id AAA15428; Fri, 15 Dec 2000 00:21:04 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id AAA05776; Fri, 15 Dec 2000 00:20:59 -0800 (PST) Message-ID: <007001c06670$7345d2e0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Carsten Langgaard" , "Ralf Baechle" Cc: References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> <3A39CC1F.8FE7B2FE@mips.com> Subject: Re: 64 bit build fails Date: Fri, 15 Dec 2000 09:24:22 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > Looks like an attempt to build a 64-bit Indy kernel. Various people working > > on the Origin support have completly broken the support for anything else in > > their battle tank-style approach ... > > Ok, that explains why a lot of things are broken. > So who will be responsible for fixing all the broken pieces ? In the absence of the SGI people being directed to do a clean job, I suppose the problem falls to those who have an interest in a clean and portable 64-bit MIPS kernel. That would include MIPS, of course. But what about the rest of you - could we see a show of virtual hands? I know that TI has both 4K and 5K licenses, and may want to be able to exploit the 64-bit capability of the 5K under Linux. And the guys doing the Vr41xx ports may also be interested. Anyone else? Those of you with R4K-based DECstations, perhaps? Software shops looking to support high-end embedded MIPS in set-tops? Another aspect of this is that, in the newer MIPS designs that conform to the MIPS64 architecture spec, it is finally possible to cleanly seperate the use of 64-bit data types from the use of 64-bit virtual addresses. The processors in the SGI platforms do not have this capability, and it would be a lot to ask of the people doing 64-bit Linux for Origin etc. to treat the addressing and data aspects orthogonally. I haven't checked the code, but I would imagine that we will have to go in and redo things from that perspective as well. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Fri Dec 15 01:01:50 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 01:01:30 -0800 Received: from router.isratech.ro ([193.226.114.69]:43275 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 01:01:05 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBF90S622222; Fri, 15 Dec 2000 11:00:29 +0200 Message-ID: <3A3A4C13.9FAD7FB8@isratech.ro> Date: Fri, 15 Dec 2000 11:51:32 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Harald Koerfgen CC: linux-mips@oss.sgi.com, Brady Brown Subject: Re: YAMON. References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Harald, Thanks. In principle I want to do such a thing and to run linux from ROM if this is possible and I saw that it is possible. Now I read the documentation and I hope to manage to setup this kind of kernel. Thanks again. Nicu Harald Koerfgen wrote: > On 14-Dec-00 Nicu Popovici wrote: > > Thanks . Now I have a much bigger problem. I have to try to start this ATLAS > > board without a HDD and without ethernet. At reset it should give me a login > > prompt which I have to see throught the console. Can anyone help me ? > > The linux-vr tree has a nice feature called XIP (eXecute In Place). This allows > to prepare a kernel to run directly out of ROM. > > http://linuxvr-org > > if that's what you're looking for. > > -- > Regards, > Harald From owner-linux-mips@oss.sgi.com Fri Dec 15 07:23:52 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 07:23:43 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:5364 "EHLO lappi") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 07:23:20 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 15 Dec 2000 08:20:23 -0700 Date: Fri, 15 Dec 2000 16:20:23 +0100 From: Ralf Baechle To: Carsten Langgaard Cc: linux-mips@oss.sgi.com Subject: Re: 64 bit build fails Message-ID: <20001215162023.B28594@bacchus.dhis.org> References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> <3A39CC1F.8FE7B2FE@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A39CC1F.8FE7B2FE@mips.com>; from carstenl@mips.com on Fri, Dec 15, 2000 at 08:45:35AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 15, 2000 at 08:45:35AM +0100, Carsten Langgaard wrote: > > > mips64-linux-gcc -D__KERNEL__ > > > -I/home/soc/proj/work/carstenl/sw/linux-2.4.0/include -Wall > > > -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing > > > -mabi=64 -G 0 -mno-abicalls -fno-pic -Wa,--trap -pipe -mcpu=r8000 -mips4 > > > -Wa,-32 -c head.S -o head.o > > > head.S: Assembler messages: > > > head.S:69: Error: Missing ')' assumed > > > > Looks like an attempt to build a 64-bit Indy kernel. Various people working > > on the Origin support have completly broken the support for anything else in > > their battle tank-style approach ... > > Ok, that explains why a lot of things are broken. > So who will be responsible for fixing all the broken pieces ? This is the question you'd ask a company. This is Free Software, not some company's product ... Ralf From owner-linux-mips@oss.sgi.com Fri Dec 15 07:35:12 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 07:34:53 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:12532 "EHLO lappi") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 07:34:47 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 15 Dec 2000 08:32:08 -0700 Date: Fri, 15 Dec 2000 16:32:08 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Carsten Langgaard , linux-mips@oss.sgi.com Subject: Re: 64 bit build fails Message-ID: <20001215163208.D28594@bacchus.dhis.org> References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> <3A39CC1F.8FE7B2FE@mips.com> <007001c06670$7345d2e0$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <007001c06670$7345d2e0$0deca8c0@Ulysses>; from kevink@mips.com on Fri, Dec 15, 2000 at 09:24:22AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 15, 2000 at 09:24:22AM +0100, Kevin D. Kissell wrote: > In the absence of the SGI people being directed to do a > clean job, I suppose the problem falls to those who have > an interest in a clean and portable 64-bit MIPS kernel. > That would include MIPS, of course. But what about the > rest of you - could we see a show of virtual hands? I > know that TI has both 4K and 5K licenses, and may > want to be able to exploit the 64-bit capability of the 5K > under Linux. And the guys doing the Vr41xx ports may > also be interested. Anyone else? Those of you with > R4K-based DECstations, perhaps? Software shops > looking to support high-end embedded MIPS in set-tops? > > Another aspect of this is that, in the newer MIPS > designs that conform to the MIPS64 architecture spec, > it is finally possible to cleanly seperate the use of > 64-bit data types from the use of 64-bit virtual addresses. > The processors in the SGI platforms do not have this > capability, and it would be a lot to ask of the people > doing 64-bit Linux for Origin etc. to treat the addressing > and data aspects orthogonally. I haven't checked the > code, but I would imagine that we will have to go in > and redo things from that perspective as well. That's one of the plans I have; even in the absense of these new MIPS64 features separation of these new features makes sense. One of the plans on my agenda is for example the introduction of 2-level pagetables for mips64 which will eleminate much of the extra price the 64-bit kernel currently has to pay. Ralf From owner-linux-mips@oss.sgi.com Fri Dec 15 08:11:22 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 08:11:13 -0800 Received: from f241.law3.hotmail.com ([209.185.241.241]:63243 "EHLO hotmail.com") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 08:11:02 -0800 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 15 Dec 2000 08:10:56 -0800 Received: from 207.175.43.231 by lw3fd.law3.hotmail.msn.com with HTTP; Fri, 15 Dec 2000 16:10:56 GMT X-Originating-IP: [207.175.43.231] From: "James McD" To: linux-mips@oss.sgi.com Subject: memory hog Date: Fri, 15 Dec 2000 16:10:56 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 15 Dec 2000 16:10:56.0843 (UTC) FILETIME=[9B60C9B0:01C066B1] Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I have an SGI INDY r4600 133 with 64 megs of ram and a 1 gig drive. I have simple linux and the 2.4test9 kernel running on it. Thank you for the advice on getting it booting from the hard drive btw Guido! Here is my dilema. It has nothing running other than standard services ie. login, networking. No web server, none of the goodies yet, and I am consuming 60 out of my 64 megs of available ram. I do not even have X installed yet. I know 64 megs isnt alot, but it seems to be quite a high consumption for no services being run. Please let me know if anybody knows if an SGI handles memory differently, or if I should just get more and quit whining. Thanks, James McDermott _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com From owner-linux-mips@oss.sgi.com Fri Dec 15 09:14:53 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 09:14:43 -0800 Received: from router.isratech.ro ([193.226.114.69]:44806 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 09:14:35 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBFHEI609804 for ; Fri, 15 Dec 2000 19:14:19 +0200 Message-ID: <3A3ABFA9.8608799D@isratech.ro> Date: Fri, 15 Dec 2000 20:04:42 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Little endian. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello , I have the follwing problem. I setup a HardHat distribution on a mips machine ( an ATLAS board) and everithing runs fine in big-endian mode. Now I want to run the board inlittle endian mode so I took the linux/mipsel distribution , I did the same steps as with big-endian distribution. I run load tftp:/linux/mipsel/vmlinux-el.srec and it works fine . Then I issue the command go . root=/dev/sda1 ( I do not install the HardHat again ???? maybe here it is the problem ) I get the following error. ========================================================== VFS: Mounted root (ext2 filesystem) readonly. Freeing prom memory: 1020k freed Freeing unused kernel memory: 68k freed Kernel panic: No init found. Try passing init= option to kernel. ========================================================== So please tell me where did I go wrong ? Nicu From owner-linux-mips@oss.sgi.com Fri Dec 15 10:25:35 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 10:25:15 -0800 Received: from mx.mips.com ([206.31.31.226]:8924 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 10:25:04 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id KAA23981; Fri, 15 Dec 2000 10:24:48 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id KAA20755; Fri, 15 Dec 2000 10:24:54 -0800 (PST) Message-ID: <001301c066c4$d2b9f7c0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Nicu Popovici" , References: <3A3ABFA9.8608799D@isratech.ro> Subject: Re: Little endian. Date: Fri, 15 Dec 2000 19:28:15 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing If you want to run little-endian, you need to install the little-endian binaries and libraries. Since I needed to "swing both ways", I put both a big-endian root and a little-endian root partition on my Atlas disk, with user/data partitions that can be mounted on either one - fortunately, the Ext2FS metadata seems to be consistent regardless of endianness. Kevin K. ----- Original Message ----- From: "Nicu Popovici" To: Sent: Saturday, December 16, 2000 2:04 AM Subject: Little endian. > Hello , > > I have the follwing problem. I setup a HardHat distribution on a mips > machine ( an ATLAS board) and everithing runs fine in big-endian mode. > Now I want to run the board inlittle endian mode so I took the > linux/mipsel distribution , I did the same steps as with big-endian > distribution. I run load tftp:/linux/mipsel/vmlinux-el.srec and it works > fine . Then I issue the command go . root=/dev/sda1 ( I do not install > the HardHat again ???? maybe here it is the problem ) I get the > following error. > ========================================================== > VFS: Mounted root (ext2 filesystem) readonly. > Freeing prom memory: 1020k freed > Freeing unused kernel memory: 68k freed > Kernel panic: No init found. Try passing init= option to kernel. > ========================================================== > So please tell me where did I go wrong ? > > Nicu > From owner-linux-mips@oss.sgi.com Fri Dec 15 14:28:48 2000 Received: by oss.sgi.com id ; Fri, 15 Dec 2000 14:28:28 -0800 Received: from chmls06.mediaone.net ([24.147.1.144]:52141 "EHLO chmls06.mediaone.net") by oss.sgi.com with ESMTP id ; Fri, 15 Dec 2000 14:27:57 -0800 Received: from pianoman.cluster.toy (h00001c600ed5.ne.mediaone.net [24.147.29.131]) by chmls06.mediaone.net (8.8.7/8.8.7) with ESMTP id RAA06289; Fri, 15 Dec 2000 17:27:48 -0500 (EST) Date: Fri, 15 Dec 2000 17:28:13 -0500 (EST) From: PianoMan X-Sender: clemej@pianoman.cluster.toy To: "Kevin D. Kissell" cc: Carsten Langgaard , linux-mips@oss.sgi.com Subject: Re: 64 bit build fails In-Reply-To: <007001c06670$7345d2e0$0deca8c0@Ulysses> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > > Looks like an attempt to build a 64-bit Indy kernel. Various people > working > > > on the Origin support have completly broken the support for anything > else in > > > their battle tank-style approach ... > > > > Ok, that explains why a lot of things are broken. > > So who will be responsible for fixing all the broken pieces ? > > In the absence of the SGI people being directed to do a > clean job, I suppose the problem falls to those who have > an interest in a clean and portable 64-bit MIPS kernel. > That would include MIPS, of course. But what about the > rest of you - could we see a show of virtual hands? I > know that TI has both 4K and 5K licenses, and may > want to be able to exploit the 64-bit capability of the 5K > under Linux. And the guys doing the Vr41xx ports may > also be interested. Anyone else? Those of you with > R4K-based DECstations, perhaps? Software shops > looking to support high-end embedded MIPS in set-tops? I took a crack at this a while back trying the non-brute force approach. However, I'm only interested in it as a hobby (I have an I2 R4400, and I'd like to get into some embedded work with the SiByte chip when it comes out). I was trying to make the computer look like a single node (assigning a NASID of 0, etc..), but i got bogged down in the page vs. node stuff before i got to far into it. I'd be willing to help and test again, but i have limited time now, unfortunately. I was going for functionality, not speed, obviously ;) john.c - -- John Clemens BS, Computer Engineering, RPI 2000 clemej@alum.rpi.edu at home - Parallel Computer Researcher/Hobbist clemej@mclx.com at work - Kernel Engineer From owner-linux-mips@oss.sgi.com Sat Dec 16 01:19:43 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 01:19:23 -0800 Received: from web1.lanscape.net ([64.240.156.194]:15878 "EHLO web1.lanscape.net") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 01:18:54 -0800 Received: from sumpf.cyrius.com (IDENT:root@localhost [127.0.0.1]) by web1.lanscape.net (8.9.3/8.9.3) with ESMTP id DAA04852 for ; Sat, 16 Dec 2000 03:18:25 -0600 Received: by sumpf.cyrius.com (Postfix, from userid 1000) id 73D4414ED7; Sat, 16 Dec 2000 08:56:03 +0100 (CET) Date: Sat, 16 Dec 2000 08:56:03 +0100 From: Martin Michlmayr To: linux-mips@oss.sgi.com Subject: Kernel Oops when booting on DECstation Message-ID: <20001216085603.A514@sumpf.cyrius.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing When I boot a Linux kernel on a DECstation/125, I get the following oops: >>boot 3/rz2/vmlinux root=/dev/sda1 console=ttyS2 root=/dev/sda1 >> NetBSD/pmax Secondary Boot, Revision 1.0 >> (root@vlad, Sat Mar 4 14:34:30 EST 2000) Boot: 3/rz2/vmlinux 1623360+151344=0x18c540 Starting at 0x80040584 This DECstation is a DS5000/1xx Loading R[23]00 MMU routines. CPU revision is: 00000230 Primary instruction cache 64kb, linesize 4 bytes Primary data cache 64kb, linesize 4 bytes Linux version 2.4.0-test11 (bunk@r063144.stusta.swh.mhn.de) (gcc version egcs-20 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS2 root=/dev/sda1 Calibrating delay loop... 24.77 BogoMIPS Memory: 30224k/32768k available (1453k kernel code, 2544k reserved, 68k data, 6) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Unable to handle kernel paging request at virtual address 00000004, epc == 80054 Oops in fault.c:do_page_fault, line 172: $0 : 00000000 10002000 80720410 00000000 80720410 00000000 810884d4 10002000 $8 : 00000000 00000000 00000000 00000000 00bd0000 fffffff7 ffffffff 81097180 $16: 00010f00 81094000 00000000 80048000 30464354 a0002f88 fffffff4 00010f00 $24: 00000001 0000000a 80720000 80720f58 80721090 80059b34 epc : 80059b7c Status: 10002004 Cause : 30000408 Process (pid: 0, stackpage=80720000) Stack: 8005f564 00000001 000000c0 8005f228 801c6c6c 800f191c 00000000 00000000 00000000 80720f7c 80720f7c 00000023 00000000 00000000 00000000 80720f7c 80720f7c 00000023 00010f00 00010000 00000000 80048000 30464354 a0002f88 00000200 001200d2 40208a0a 8004e168 00000000 00000020 80720fe0 00000000 8004b42c 0000261c 00010f00 00000000 80721090 0000261c 00bd0000 fffffff7 00000000 ... Call Trace: [<8005f564>] [<8005f228>] [<800f191c>] [<80048000>] [<8004e168>] [<] Code: 24630010 8e2501d4 8e230218 <8ca20004> 00000000 0043102b 10400431 241 This is with a 2.4.0-test11 kernel image compiled by Adrian Bunk. The image works for him. I get virtually the same problem when booting with Flo's test-8-pre1 image from ftp.rfc822.org: Linux version 2.4.0-test8-pre1 (flo@slimer.rfc822.org) (gcc version egcs-2.90.20 [...] POSIX conformance testing by UNIFIX Unable to handle kernel paging request at virtual address 00000004, epc == 8005c Oops in fault.c:do_page_fault, line 158: $0 : 00000000 10002000 80720370 00000000 00000000 00001098 10002000 0000003c $8 : 00002000 ffff00ff 00000000 00000000 00000000 00000000 801a9d94 10002001 $16: 00000f00 81098000 80048000 a000fcf8 30464354 a0002f88 fffffff4 00000f00 $24: 00000000 00000000 80720000 80720f58 80721090 8005999c epc : 800599f4 Status: 10002004 Cause : 30000408 Process (pid: 0, stackpage=80720000) Stack: 800d7054 81086200 800613a8 00000001 00000008 80061064 00000000 00000000 00000000 80720f7c 80720f7c 801b6737 00000000 00000000 00000000 80720f7c 80720f7c 801b6737 00000f00 00000000 80048000 a000fcf8 30464354 a0002f88 00000200 001200d2 40208a0a 8004e934 00000000 00000020 80720fe0 0000000a 8004b2cc 0000003c 00000f00 00000000 80721090 0000003c 801b6748 801a9d94 00000000 ... Call Trace: [<800d7054>] [<800613a8>] [<80061064>] [<80048000>] [<8004e934>] [<] Code: ac6b0004 8e2401d0 8e230214 <8c820004> 00000000 0043102b 10400442 241 Any ideas? (I hope and think that it has nothing to do with me booting from a NetBSD partition. I don't have ethernet on the machine and thus have to boot the kernel from the existing FFS partition in order to start Linux and then run delo. NetBSD boots and works, btw.) -- Martin Michlmayr tbm@cyrius.com From owner-linux-mips@oss.sgi.com Sat Dec 16 02:20:34 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 02:20:24 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:44299 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 02:20:04 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXRQN1CS1U00180S@research.kpn.com> for linux-mips@oss.sgi.com; Sat, 16 Dec 2000 11:20:02 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id LAA28799; Sat, 16 Dec 2000 11:20:01 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Sat, 16 Dec 2000 11:20:00 +0100 (MET) From: Karel van Houten Subject: Re: Kernel Oops when booting on DECstation In-reply-to: <20001216085603.A514@sumpf.cyrius.com> To: tbm@cyrius.com (Martin Michlmayr) Cc: linux-mips@oss.sgi.com Message-id: <200012161020.LAA28799@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Martin wrote: > When I boot a Linux kernel on a DECstation/125, I get the following oops: > > >>boot 3/rz2/vmlinux root=/dev/sda1 console=ttyS2 root=/dev/sda1 > >> NetBSD/pmax Secondary Boot, Revision 1.0 > >> (root@vlad, Sat Mar 4 14:34:30 EST 2000) > ... > POSIX conformance testing by UNIFIX > Unable to handle kernel paging request at virtual address 00000004, epc == 80054 > ... > > Any ideas? (I hope and think that it has nothing to do with me > booting from a NetBSD partition. I don't have ethernet on the machine > and thus have to boot the kernel from the existing FFS partition in > order to start Linux and then run delo. NetBSD boots and works, btw.) The next entry the kernel would print is the Turbochannel scan. Do you have any unsupported cards in your system that could cause this? Have you tried my kernels, by the way? -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Sat Dec 16 03:20:04 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 03:19:44 -0800 Received: from ppp0.ocs.com.au ([203.34.97.3]:48905 "HELO mail.ocs.com.au") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 03:19:18 -0800 Received: (qmail 5581 invoked from network); 16 Dec 2000 11:19:11 -0000 Received: from ocs3.ocs-net (192.168.255.3) by mail.ocs.com.au with SMTP; 16 Dec 2000 11:19:11 -0000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: Martin Michlmayr cc: linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation In-reply-to: Your message of "Sat, 16 Dec 2000 08:56:03 BST." <20001216085603.A514@sumpf.cyrius.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 16 Dec 2000 22:19:10 +1100 Message-ID: <15209.976965550@ocs3.ocs-net> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 16 Dec 2000 08:56:03 +0100, Martin Michlmayr wrote: >When I boot a Linux kernel on a DECstation/125, I get the following oops: >Oops in fault.c:do_page_fault, line 172: >Call Trace: [<8005f564>] [<8005f228>] [<800f191c>] [<80048000>] [<8004e168>] [<] >Code: 24630010 8e2501d4 8e230218 <8ca20004> 00000000 0043102b 10400431 241 Those two lines have been truncated at end of line instead of wrapping onto the next line. Capture the full text (without truncation) and run it through ksymoops[*] to decode it. [*]ftp://ftp..kernel.org/pub/linux/utils/kernel/ksymoops/v2.3 From owner-linux-mips@oss.sgi.com Sat Dec 16 06:55:15 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 06:54:56 -0800 Received: from web1.lanscape.net ([64.240.156.194]:12041 "EHLO web1.lanscape.net") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 06:54:27 -0800 Received: from sumpf.cyrius.com (IDENT:root@localhost [127.0.0.1]) by web1.lanscape.net (8.9.3/8.9.3) with ESMTP id IAA07736; Sat, 16 Dec 2000 08:54:02 -0600 Received: by sumpf.cyrius.com (Postfix, from userid 1000) id 7729E14EF4; Sat, 16 Dec 2000 16:00:51 +0100 (CET) Date: Sat, 16 Dec 2000 16:00:51 +0100 From: Martin Michlmayr To: Keith Owens Cc: linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation Message-ID: <20001216160051.A904@sumpf.cyrius.com> References: <20001216085603.A514@sumpf.cyrius.com> <15209.976965550@ocs3.ocs-net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <15209.976965550@ocs3.ocs-net>; from kaos@melbourne.sgi.com on Sat, Dec 16, 2000 at 10:19:10PM +1100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing * Keith Owens [20001216 22:19]: > Those two lines have been truncated at end of line instead of wrapping > onto the next line. Capture the full text (without truncation) and run > it through ksymoops[*] to decode it. ksymoops 2.3.5 on i586 2.2.15. Options used -v /home/tbm/a/vmlinux-2.4.0-test8-pre1 (specified) -K (specified) -L (specified) -O (specified) -m /home/tbm/a/System.map-2.4.0-test8-pre1 (specified) -a mipsel Unable to handle kernel paging request at virtual address 00000004, epc == 800599f4, ra == 8005999c $0 : 00000000 10002000 80720370 00000000 00000000 00001098 10002000 0000003c $8 : 00002000 ffff00ff 00000000 00000000 00000000 00000000 801a9d94 10002001 $16: 00000f00 81098000 80048000 a000fcf8 30464354 a0002f88 fffffff4 00000f00 $24: 00000000 00000000 80720000 80720f58 80721090 8005999c epc : 800599f4 Using defaults from ksymoops -t elf32-i386 Status: 10002004 Cause : 30000408 Process (pid: 0, stackpage=80720000) Stack: 800d7054 81086200 800613a8 00000001 00000008 80061064 00000000 00000000 00000000 80720f7c 80720f7c 801b6737 00000000 00000000 00000000 80720f7c 80720f7c 801b6737 00000f00 00000000 80048000 a000fcf8 30464354 a0002f88 00000200 001200d2 40208a0a 8004e934 00000000 00000020 80720fe0 0000000a 8004b2cc 0000003c 00000f00 00000000 80721090 0000003c 801b6748 801a9d94 00000000 ... Call Trace: [<800d7054>] [<800613a8>] [<80061064>] [<80048000>] [<8004e934>] [<8004b2cc>] Code: ac6b0004 8e2401d0 8e230214 <8c820004> 00000000 0043102b 10400442 2416fff5 40036000 Error (Oops_bfd_perror): scan_arch for specified architecture Success >>RA; 8005999c >>EIP; 800599f4 <===== Trace; 800d7054 Trace; 800613a8 Trace; 80061064 <__gnu_compiled_c+c4/138> Trace; 80048000 <__gnu_compiled_c+0/0> Trace; 8004e934 Trace; 8004b2cc 1 error issued. Results may not be reliable. (This kernel is from ftp://ftp.rfc822.org/pub/local/linux-mipsel/kernel (?) file: kernel-image-2.4.0-test8-pre1-dec-r3k.tar.gz) ksymoops 2.3.5 on i586 2.2.15. Options used -v /home/tbm/linux-2.4.0test11mipsel (specified) -K (specified) -L (specified) -O (specified) -M (specified) -a mipsel Error (pclose_local): read_nm_symbols pclose failed 0x100 Warning (read_vmlinux): no kernel symbols in vmlinux, is /home/tbm/linux-2.4.0test11mipsel a valid vmlinux file? Warning (merge_maps): no symbols in merged map Unable to handle kernel paging request at virtual address 00000004, epc == 80059b7c, ra == 80059b34 $0 : 00000000 10002000 80720410 00000000 80720410 00000000 810884d4 10002000 $8 : 00000000 00000000 00000000 00000000 00bd0000 fffffff7 ffffffff 81097180 $16: 00010f00 81094000 00000000 80048000 30464354 a0002f88 fffffff4 00010f00 $24: 00000001 0000000a 80720000 80720f58 80721090 80059b34 epc : 80059b7c Using defaults from ksymoops -t elf32-i386 Status: 10002004 Cause : 30000408 Process (pid: 0, stackpage=80720000) Stack: 8005f564 00002400 000000c0 8005f228 801c6c6c 800f191c 00000000 00000000 00000000 80720f7c 80720f7c 00000023 00000000 00000000 00000000 80720f7c 80720f7c 00000023 00010f00 00010000 00000000 80048000 30464354 a0002f88 00000000 001200d2 40208a0a 8004e168 00000000 00000020 80720fe0 00000000 8004b42c 0000261c 00010f00 00000000 80721090 0000261c 00bd0000 fffffff7 00000000 ... Call Trace: [<8005f564>] [<8005f228>] [<800f191c>] [<80048000>] [<8004e168>] [<8004b42c>] Code: 24630010 8e2501d4 8e230218 <8ca20004> 00000000 0043102b 10400431 2416fff5 40046000 Error (Oops_bfd_perror): scan_arch for specified architecture Success >>RA; 80059b34 No symbols available >>EIP; 80059b7c No symbols available <===== Trace; 8005f564 No symbols available Trace; 8005f228 No symbols available Trace; 800f191c No symbols available Trace; 80048000 No symbols available Trace; 8004e168 No symbols available Trace; 8004b42c No symbols available 2 warnings and 2 errors issued. Results may not be reliable. (This kernel is from http://www.fs.tum.de/~bunk/linux-2.4.0test11mipsel) -- Martin Michlmayr tbm@cyrius.com From owner-linux-mips@oss.sgi.com Sat Dec 16 07:10:25 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 07:10:16 -0800 Received: from ppp0.ocs.com.au ([203.34.97.3]:52747 "HELO mail.ocs.com.au") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 07:10:01 -0800 Received: (qmail 8292 invoked from network); 16 Dec 2000 15:09:52 -0000 Received: from ocs3.ocs-net (192.168.255.3) by mail.ocs.com.au with SMTP; 16 Dec 2000 15:09:52 -0000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: Martin Michlmayr cc: linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation In-reply-to: Your message of "Sat, 16 Dec 2000 16:00:51 BST." <20001216160051.A904@sumpf.cyrius.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 17 Dec 2000 02:09:51 +1100 Message-ID: <23987.976979391@ocs3.ocs-net> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 16 Dec 2000 16:00:51 +0100, Martin Michlmayr wrote: >ksymoops 2.3.5 on i586 2.2.15. Options used > -a mipsel >Using defaults from ksymoops -t elf32-i386 The joys of cross system debugging. You need to set ksymoops option -t, it is defaulting to elf32-i386 which is no good for mips objects. You almost certainly need to set environment variables KSYMOOPS_NM and KSYMOOPS_OBJDUMP to point to versions of these programs that understand mips. If mips prints the code in big endian format then you need to use ksymoops option -e. man ksymoops and scan for 'cross'. From owner-linux-mips@oss.sgi.com Sat Dec 16 10:05:07 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 10:04:57 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:54255 "EHLO lappi") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 10:04:31 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 16 Dec 2000 04:45:39 -0700 Date: Sat, 16 Dec 2000 12:45:39 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: Little endian. Message-ID: <20001216124539.A6896@bacchus.dhis.org> References: <3A3ABFA9.8608799D@isratech.ro> <001301c066c4$d2b9f7c0$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <001301c066c4$d2b9f7c0$0deca8c0@Ulysses>; from kevink@mips.com on Fri, Dec 15, 2000 at 07:28:15PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 15, 2000 at 07:28:15PM +0100, Kevin D. Kissell wrote: > If you want to run little-endian, you need to install > the little-endian binaries and libraries. Since I needed > to "swing both ways", I put both a big-endian root and > a little-endian root partition on my Atlas disk, with user/data > partitions that can be mounted on either one - fortunately, > the Ext2FS metadata seems to be consistent regardless > of endianness. Ext2fs on-disk data structures are defined to be little endian. Some very old ext2 filesystems which afaik where all created on Linux/M68K were big endian; for those e2fsck has the option to change the endianess of the filesystem during a fsck run; the current kernel will refuse to accept such big endian ext2 filesystems. Ralf From owner-linux-mips@oss.sgi.com Sat Dec 16 10:05:07 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 10:04:47 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:54255 "EHLO lappi") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 10:04:32 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 16 Dec 2000 04:47:06 -0700 Date: Sat, 16 Dec 2000 12:47:06 +0100 From: Ralf Baechle To: James McD Cc: linux-mips@oss.sgi.com Subject: Re: memory hog Message-ID: <20001216124705.B6896@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from vile8@hotmail.com on Fri, Dec 15, 2000 at 04:10:56PM +0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 15, 2000 at 04:10:56PM +0000, James McD wrote: > I have an SGI INDY r4600 133 with 64 megs of ram and a 1 gig drive. I have > simple linux and the 2.4test9 kernel running on it. Thank you for the advice > on getting it booting from the hard drive btw Guido! > Here is my dilema. It has nothing running other than standard services > ie. login, networking. No web server, none of the goodies yet, and I am > consuming 60 out of my 64 megs of available ram. I do not even have X > installed yet. I know 64 megs isnt alot, but it seems to be quite a high > consumption for no services being run. Please let me know if anybody knows > if an SGI handles memory differently, or if I should just get more and quit > whining. That's a classic one - Linux uses most of it's `free' memory as disk cache, so it doesn't show up as `free' in the free output. Ralf From owner-linux-mips@oss.sgi.com Sat Dec 16 10:05:07 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 10:04:46 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:54255 "EHLO lappi") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 10:04:32 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 16 Dec 2000 04:48:44 -0700 Date: Sat, 16 Dec 2000 12:48:44 +0100 From: Ralf Baechle To: Pete Black Cc: "'linux-mips@oss.sgi.com'" Subject: Re: Linux/MIPS on quad-R4400 Challenge L Message-ID: <20001216124844.C6896@bacchus.dhis.org> References: <8BEF9F7FD6FEA8409D2A706B2D6D32280553FF@server1.metering.co.nz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <8BEF9F7FD6FEA8409D2A706B2D6D32280553FF@server1.metering.co.nz>; from pete.black@metering.co.nz on Fri, Dec 15, 2000 at 11:16:31AM +1300 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Dec 15, 2000 at 11:16:31AM +1300, Pete Black wrote: > I happen to have acquired a quad-R4400 SGI Challenge-L server. > > It's big, it's black, and it seems to run OK. > > Is there any support in Linux/MIPS for a beast like this? The Challenge L isn't supported. > >From what i read on the FAQs, the Multi-processor versions of the R4400 are > not supported.. will there ever be a time when Linux/MIPS will run on a > machin elike this, or am i stuck with IRIX for the rest of this machine's > life? Standard approach - send me a Challenge L and hardware docs with permission to publish code based on it and we can solve your problem :-) Ralf From owner-linux-mips@oss.sgi.com Sat Dec 16 16:36:59 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 16:36:49 -0800 Received: from pop3.web.de ([212.227.116.81]:7439 "HELO smtp.web.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 16:36:32 -0800 Received: from web.de by smtp.web.de with smtp (freemail 4.2.1.0 #3) id m147RoM-005D7uC; Sun, 17 Dec 2000 01:36 +0100 Message-ID: <3A3C0ACE.8A13EA97@web.de> Date: Sun, 17 Dec 2000 01:37:34 +0100 From: Olaf Zaplinski X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: de,en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Re: FAQ/ References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as there is no doc at all, this dist is unusuable... perhaps I am lucky with that, I strongly dislike the Debian dist. Olaf Florian Lohoff wrote: > > On Wed, Dec 13, 2000 at 12:08:46AM +0100, Olaf Zaplinski wrote: > > Hi all, > > > > can someone please point me to a Howto/FAQ? I'd like to put Linux on my SNI > > RM200 machine (R4600, 64MB). Can I use the Hardhat distribution, or does it > > run on SGIs only? > > The RM200 was supported only in little endian mode with the Windows NT > firmware - Nobody knows (chance is little) if the tree will still work. > > You will need the decstation root not the hardhat tarball as that > is strictly big endian. > > Flo > -- > Florian Lohoff flo@rfc822.org +49-5201-669912 > Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Sat Dec 16 16:42:09 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 16:41:59 -0800 Received: from air.lug-owl.de ([62.52.24.190]:44039 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 16:41:42 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 400478655; Sun, 17 Dec 2000 01:41:37 +0100 (CET) Date: Sun, 17 Dec 2000 01:41:36 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217014136.A29250@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="SUOF0GtieIMvvwua" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A3C0ACE.8A13EA97@web.de>; from olaf.zaplinski@web.de on Sun, Dec 17, 2000 at 01:37:34AM +0100 X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --SUOF0GtieIMvvwua Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Dec 17, 2000 at 01:37:34AM +0100, Olaf Zaplinski wrote: > Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as > there is no doc at all, this dist is unusuable... perhaps I am lucky with > that, I strongly dislike the Debian dist. Try searching for 'declinux'. MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --SUOF0GtieIMvvwua Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjo8C8AACgkQHb1edYOZ4bt8UwCdFbv7j2IKKu+U+wsXbkN0ECDu 3u4AmwWrC9xIZ7mCk5SwWingXUmJOxwb =wAkS -----END PGP SIGNATURE----- --SUOF0GtieIMvvwua-- From owner-linux-mips@oss.sgi.com Sat Dec 16 17:01:29 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 17:01:09 -0800 Received: from air.lug-owl.de ([62.52.24.190]:44807 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 17:00:46 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 1F3B88655; Sun, 17 Dec 2000 02:00:43 +0100 (CET) Date: Sun, 17 Dec 2000 02:00:43 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217020043.B29250@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="nVMJ2NtxeReIH9PS" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A3C0ACE.8A13EA97@web.de>; from olaf.zaplinski@web.de on Sun, Dec 17, 2000 at 01:37:34AM +0100 X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --nVMJ2NtxeReIH9PS Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Dec 17, 2000 at 01:37:34AM +0100, Olaf Zaplinski wrote: > Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as > there is no doc at all, this dist is unusuable... perhaps I am lucky with > that, I strongly dislike the Debian dist. Btw, what kind of doc do you expect? The MIPS port is, well, everything but a "customer linux" right now. It's more-or-less working for people who know what they do. There's no installer comparable to a regular PC installation (insert boot CDROM, press enter sometimes, ready). Everything you can expect is a tarball, which can be mounted via nfsroot. There you can find a kernel inside which you can boot over bootp/tftp (or via mop, if you have not so much luck). Then, you can locally fdisk/mkfs/mount your HDDs and copy everything by hand. That's the installation. Anything else still needs to be written. I've started an approach of a clean debian root filesystem (ftp.lug-owl.de) you may want to try. However, Debian is currently the only distribution supporting those machines at all. The declinux image is heavily outdated and ships a totally broken libc with it... It's no fun! MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G PS: http://oss.sgi.com/mips/mips-howto.html --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --nVMJ2NtxeReIH9PS Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjo8EDoACgkQHb1edYOZ4bt6eQCffQnYKPhvZcBYfRIxf4CdHwCN td8An0HFilpQWPcHyriI2RKaJa6FYSTJ =Uysh -----END PGP SIGNATURE----- --nVMJ2NtxeReIH9PS-- From owner-linux-mips@oss.sgi.com Sat Dec 16 17:30:30 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 17:30:20 -0800 Received: from haliga.physik.TU-Cottbus.De ([141.43.75.9]:42768 "HELO haliga.physik.tu-cottbus.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 17:30:04 -0800 Received: by haliga.physik.tu-cottbus.de (Postfix, from userid 7215) id 1B2908D8F; Sun, 17 Dec 2000 02:29:56 +0100 (CET) Date: Sun, 17 Dec 2000 02:29:55 +0100 To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217022955.A10064@physik.tu-cottbus.de> References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001217020043.B29250@lug-owl.de>; from jbglaw@lug-owl.de on Sun, Dec 17, 2000 at 02:00:43AM +0100 From: heinold@physik.tu-cottbus.de (H.Heinold) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Dec 17, 2000 at 02:00:43AM +0100, Jan-Benedict Glaw wrote: > On Sun, Dec 17, 2000 at 01:37:34AM +0100, Olaf Zaplinski wrote: > > Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as > > there is no doc at all, this dist is unusuable... perhaps I am lucky with > > that, I strongly dislike the Debian dist. > > Btw, what kind of doc do you expect? The MIPS port is, well, everything > but a "customer linux" right now. It's more-or-less working for > people who know what they do. There's no installer comparable to > a regular PC installation (insert boot CDROM, press enter sometimes, > ready). Everything you can expect is a tarball, which can be > mounted via nfsroot. There you can find a kernel inside which you > can boot over bootp/tftp (or via mop, if you have not so much luck). > Then, you can locally fdisk/mkfs/mount your HDDs and copy everything > by hand. That's the installation. > > Anything else still needs to be written. I've started an approach > of a clean debian root filesystem (ftp.lug-owl.de) you may want > to try. However, Debian is currently the only distribution supporting > those machines at all. The declinux image is heavily outdated and > ships a totally broken libc with it... It's no fun! > > MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G > PS: http://oss.sgi.com/mips/mips-howto.html > Hm I am still working on the boot floppies for debian, when I have the time. for mipsel they should work, but I only build them for mips. the problem on mips was the sgi disklabel, but that isnt used on dec. -- Henning Heinold From owner-linux-mips@oss.sgi.com Sat Dec 16 17:38:50 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 17:38:30 -0800 Received: from pop3.web.de ([212.227.116.81]:30227 "HELO smtp.web.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 17:38:13 -0800 Received: from web.de by smtp.web.de with smtp (freemail 4.2.1.0 #3) id m147SmB-005CLrC; Sun, 17 Dec 2000 02:38 +0100 Message-ID: <3A3C194B.5E85C4CE@web.de> Date: Sun, 17 Dec 2000 02:39:23 +0100 From: Olaf Zaplinski X-Mailer: Mozilla 4.76 [en] (Win98; U) X-Accept-Language: de,en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Re: FAQ/ References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Huh, I don't expect comfort. But I expect a x68 Linux users guide to the world of MIPS systems. Okay, I know my RM 200 quite well, had compiled several progs under Sinix, put it in LE mode and installes WinNT 4.0. I use Linux since the 0.something kernel. The problem is that the Debian WWW site consists of lots of "404" errors. On the ftp site there is no docu at all that would tell me how to proceed. For Hardhat, I have found this information. What I want: a documentation of the form: - how to prepare your bootp server - how to boot the kernel via bootp - how to start some install script *or* boot your mini-dist/root-fs via NFS, fdisk, cp and enjoy That would be enough. Olaf Jan-Benedict Glaw wrote: > > On Sun, Dec 17, 2000 at 01:37:34AM +0100, Olaf Zaplinski wrote: > > Where do I find it? I saw the debian-mipsel dist on ftp.rfc822.org, but as > > there is no doc at all, this dist is unusuable... perhaps I am lucky with > > that, I strongly dislike the Debian dist. > > Btw, what kind of doc do you expect? The MIPS port is, well, everything > but a "customer linux" right now. It's more-or-less working for > people who know what they do. There's no installer comparable to > a regular PC installation (insert boot CDROM, press enter sometimes, > ready). Everything you can expect is a tarball, which can be > mounted via nfsroot. There you can find a kernel inside which you > can boot over bootp/tftp (or via mop, if you have not so much luck). > Then, you can locally fdisk/mkfs/mount your HDDs and copy everything > by hand. That's the installation. > > Anything else still needs to be written. I've started an approach > of a clean debian root filesystem (ftp.lug-owl.de) you may want > to try. However, Debian is currently the only distribution supporting > those machines at all. The declinux image is heavily outdated and > ships a totally broken libc with it... It's no fun! > > MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G > PS: http://oss.sgi.com/mips/mips-howto.html > > -- > Fehler eingestehen, Größe zeigen: Nehmt die Rechtschreibreform zurück!!! > /* Jan-Benedict Glaw -- +49-177-5601720 */ > keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB > "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) > > ---------------------------------------------------------------------------- > Part 1.2Type: application/pgp-signature From owner-linux-mips@oss.sgi.com Sat Dec 16 18:38:50 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 18:38:40 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:23538 "EHLO lappi") by oss.sgi.com with ESMTP id ; Sat, 16 Dec 2000 18:38:15 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sat, 16 Dec 2000 19:34:38 -0700 Date: Sun, 17 Dec 2000 03:34:38 +0100 From: Ralf Baechle To: "H.Heinold" Cc: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217033438.B9742@bacchus.dhis.org> References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> <20001217022955.A10064@physik.tu-cottbus.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001217022955.A10064@physik.tu-cottbus.de>; from heinold@physik.tu-cottbus.de on Sun, Dec 17, 2000 at 02:29:55AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Dec 17, 2000 at 02:29:55AM +0100, H.Heinold wrote: > > Anything else still needs to be written. I've started an approach > > of a clean debian root filesystem (ftp.lug-owl.de) you may want > > to try. However, Debian is currently the only distribution supporting > > those machines at all. The declinux image is heavily outdated and > > ships a totally broken libc with it... It's no fun! > > > > MfG, JB"Nur die Harten komm'n in'n Garten, alle Weichen geh'n in Teich!"G > > PS: http://oss.sgi.com/mips/mips-howto.html > > > > Hm I am still working on the boot floppies for debian, when I have the time. > for mipsel they should work, but I only build them for mips. > the problem on mips was the sgi disklabel, but that isnt used on dec. But SGI's don't have floppies :-) Ralf From owner-linux-mips@oss.sgi.com Sat Dec 16 22:51:00 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 22:50:41 -0800 Received: from air.lug-owl.de ([62.52.24.190]:32015 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 22:50:22 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 7C0298655; Sun, 17 Dec 2000 07:50:18 +0100 (CET) Date: Sun, 17 Dec 2000 07:50:17 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217075015.A5352@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> <20001217022955.A10064@physik.tu-cottbus.de> <20001217033438.B9742@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="J/dobhs11T7y2rNN" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001217033438.B9742@bacchus.dhis.org>; from ralf@oss.sgi.com on Sun, Dec 17, 2000 at 03:34:38AM +0100 X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --J/dobhs11T7y2rNN Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Dec 17, 2000 at 03:34:38AM +0100, Ralf Baechle wrote: > On Sun, Dec 17, 2000 at 02:29:55AM +0100, H.Heinold wrote: >=20 > > Hm I am still working on the boot floppies for debian, when I have the = time. > > for mipsel they should work, but I only build them for mips. > > the problem on mips was the sgi disklabel, but that isnt used on dec.= =20 >=20 > But SGI's don't have floppies :-) Question in charge: Do DECstations really have floppies? Mine do not... So vor me it's only relevant to have an nfsroot.tgz allowing me to install further packages... MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --J/dobhs11T7y2rNN Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjo8YicACgkQHb1edYOZ4bvk/QCffm9crNglnxTy6UMnSbxr89UO OYcAn23lql9mRFQA4qI/kh1pmoJwfSv8 =u7OP -----END PGP SIGNATURE----- --J/dobhs11T7y2rNN-- From owner-linux-mips@oss.sgi.com Sat Dec 16 22:58:31 2000 Received: by oss.sgi.com id ; Sat, 16 Dec 2000 22:58:10 -0800 Received: from air.lug-owl.de ([62.52.24.190]:7952 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sat, 16 Dec 2000 22:57:56 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 5791C8655; Sun, 17 Dec 2000 07:57:53 +0100 (CET) Date: Sun, 17 Dec 2000 07:57:53 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217075752.B5352@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> <3A3C194B.5E85C4CE@web.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="eAbsdosE1cNLO4uF" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A3C194B.5E85C4CE@web.de>; from olaf.zaplinski@web.de on Sun, Dec 17, 2000 at 02:39:23AM +0100 X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --eAbsdosE1cNLO4uF Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Dec 17, 2000 at 02:39:23AM +0100, Olaf Zaplinski wrote: > - how to prepare your bootp server Install bootp (or dhcpd, which can do bootp as well) and read its documentation. > - how to boot the kernel via bootp This is specific to your machine's firmware. > - how to start some install script *or* boot your mini-dist/root-fs via N= FS, > fdisk, cp and enjoy less ./linux/Documentation/nfsroot.txt ~~VeryShortVersion~~: - Activate "IP Auto Configuration" in "Networking Options" - Build NFS directly into your kernel; there, also activate NFS-Root support - "root=3D/dev/nfs" as one command option when booting the kernel (this is the easyest method). Then, the client mounts /tftpboot/ from the server which did the bootp reply. Otoh, you could configure your bootp server to provide a different boot server or boot path. fdisk and cp (btw, you should better use tar in a pipe for that...) should be no problem... MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --eAbsdosE1cNLO4uF Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjo8Y/AACgkQHb1edYOZ4bty3QCfQEN3mA8JA8614NlDo+1wIjJT L+cAoIiJggUzIVyEkvhi2DTFx5AFcE8t =cgeY -----END PGP SIGNATURE----- --eAbsdosE1cNLO4uF-- From owner-linux-mips@oss.sgi.com Sun Dec 17 01:44:54 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 01:44:34 -0800 Received: from mail.ivm.net ([62.204.1.4]:24160 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 01:44:08 -0800 Received: from franz.no.dom (port118.duesseldorf.ivm.de [195.247.65.118]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id KAA13625; Sun, 17 Dec 2000 10:43:59 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20001217075015.A5352@lug-owl.de> Date: Sun, 17 Dec 2000 10:21:18 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Jan-Benedict Glaw Subject: Re: FAQ/ Cc: linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 17-Dec-00 Jan-Benedict Glaw wrote: > On Sun, Dec 17, 2000 at 03:34:38AM +0100, Ralf Baechle wrote: >> On Sun, Dec 17, 2000 at 02:29:55AM +0100, H.Heinold wrote: >> >> > Hm I am still working on the boot floppies for debian, when I have the >> > time. >> > for mipsel they should work, but I only build them for mips. >> > the problem on mips was the sgi disklabel, but that isnt used on dec. >> >> But SGI's don't have floppies :-) > > Question in charge: Do DECstations really have floppies? Mine do > not... So vor me it's only relevant to have an nfsroot.tgz allowing > me to install further packages... Besides Maxines DECstations don't have floppies. Well, there are some with SCSI floppies but that doesn't count. Anyway, everything that fit's on a floppy would fit into a ramdisk as well. Compile this ramdisk image into the kernel, boot with "root=/dev/ram", et voila... Working on "boot floppies" *does* make sense, IMHO. -- Regards, Harald From owner-linux-mips@oss.sgi.com Sun Dec 17 03:12:38 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 03:12:29 -0800 Received: from mx.mips.com ([206.31.31.226]:8680 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 03:12:13 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id DAA02846; Sun, 17 Dec 2000 03:11:59 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id DAA08671; Sun, 17 Dec 2000 03:11:56 -0800 (PST) Received: from mips.com (coppccl [172.17.27.2]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id MAA08859; Sun, 17 Dec 2000 12:11:32 +0100 (MET) Message-ID: <3A3C9EF0.435DA447@mips.com> Date: Sun, 17 Dec 2000 12:09:37 +0100 From: Carsten Langgaard Organization: MIPS X-Mailer: Mozilla 4.72 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: Little endian. References: <3A3ABFA9.8608799D@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I guess, what you want to do is to install a little endian system from a nfs-server, as you probably did with the bigendian system. If this is the case then you shouldn't issue the 'go . root=/dev/sda1' command, as you haven't installed the root filesystem yet. Instead you should use this command: 'go . nfsroot= ....' /Carsten Nicu Popovici wrote: > Hello , > > I have the follwing problem. I setup a HardHat distribution on a mips > machine ( an ATLAS board) and everithing runs fine in big-endian mode. > Now I want to run the board inlittle endian mode so I took the > linux/mipsel distribution , I did the same steps as with big-endian > distribution. I run load tftp:/linux/mipsel/vmlinux-el.srec and it works > fine . Then I issue the command go . root=/dev/sda1 ( I do not install > the HardHat again ???? maybe here it is the problem ) I get the > following error. > ========================================================== > VFS: Mounted root (ext2 filesystem) readonly. > Freeing prom memory: 1020k freed > Freeing unused kernel memory: 68k freed > Kernel panic: No init found. Try passing init= option to kernel. > ========================================================== > So please tell me where did I go wrong ? > > Nicu From owner-linux-mips@oss.sgi.com Sun Dec 17 03:12:59 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 03:12:39 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:64786 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 03:12:19 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXT6R6LN580019KB@research.kpn.com> for linux-mips@oss.sgi.com; Sun, 17 Dec 2000 12:12:17 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id MAA12023; Sun, 17 Dec 2000 12:12:17 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Sun, 17 Dec 2000 12:12:16 +0100 (MET) From: Karel van Houten Subject: Re: FAQ/ In-reply-to: <20001217020043.B29250@lug-owl.de> To: jbglaw@lug-owl.de Cc: linux-mips@oss.sgi.com Message-id: <200012171112.MAA12023@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Jan-Benedict Glaw wrote: > Anything else still needs to be written. I've started an approach > of a clean debian root filesystem (ftp.lug-owl.de) you may want > to try. However, Debian is currently the only distribution supporting > those machines at all. The declinux image is heavily outdated and > ships a totally broken libc with it... It's no fun! I have a much newer one ready, but I don't have upload permission anymore on oss.sgi.com. I've asked Quentin and Ralf to arrange this, but nothing yet... As soon as I can put files on oss again, I'll upload my new RH6.1 based root image. -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Sun Dec 17 03:15:09 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 03:14:59 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:1555 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 03:14:52 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXT6UCCFXK000Y3T@research.kpn.com> for linux-mips@oss.sgi.com; Sun, 17 Dec 2000 12:14:50 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id MAA12054; Sun, 17 Dec 2000 12:14:49 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Sun, 17 Dec 2000 12:14:49 +0100 (MET) From: Karel van Houten Subject: Re: FAQ/ In-reply-to: <3A3C194B.5E85C4CE@web.de> To: olaf.zaplinski@web.de (Olaf Zaplinski) Cc: linux-mips@oss.sgi.com Message-id: <200012171114.MAA12054@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Olaf wrote: > Huh, I don't expect comfort. But I expect a x68 Linux users guide to the > world of MIPS systems. Okay, I know my RM 200 quite well, had compiled > several progs under Sinix, put it in LE mode and installes WinNT 4.0. I use > Linux since the 0.something kernel. The problem is that the Debian WWW site > consists of lots of "404" errors. On the ftp site there is no docu at all > that would tell me how to proceed. For Hardhat, I have found this > information. > > What I want: a documentation of the form: > > - how to prepare your bootp server > - how to boot the kernel via bootp > - how to start some install script *or* boot your mini-dist/root-fs via NFS, > fdisk, cp and enjoy Have you looked at my DECStation installation HOWTO? http://www.xs4all.nl/~vhouten/mipsel -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Sun Dec 17 03:25:30 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 03:25:20 -0800 Received: from [62.145.23.107] ([62.145.23.107]:2641 "HELO fileserv2.Cologne.DE") by oss.sgi.com with SMTP id ; Sun, 17 Dec 2000 03:25:01 -0800 Received: from localhost (1612 bytes) by fileserv2.Cologne.DE via rmail with P:stdio/R:bind/T:smtp (sender: ) (ident using unix) id for ; Sun, 17 Dec 2000 12:24:59 +0100 (CET) (Smail-3.2.0.101 1997-Dec-17 #5 built 1998-Jan-19) Received: (from karsten@localhost) by excalibur.cologne.de (8.9.3/8.8.7) id KAA32389; Sun, 17 Dec 2000 10:03:13 +0100 Message-ID: <20001217100313.A28850@excalibur.cologne.de> Date: Sun, 17 Dec 2000 10:03:13 +0100 From: Karsten Merker To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Mail-Followup-To: linux-mips@oss.sgi.com References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> <20001217022955.A10064@physik.tu-cottbus.de> <20001217033438.B9742@bacchus.dhis.org> <20001217075015.A5352@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.91i In-Reply-To: <20001217075015.A5352@lug-owl.de>; from Jan-Benedict Glaw on Sun, Dec 17, 2000 at 07:50:17AM +0100 X-No-Archive: yes Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Dec 17, 2000 at 07:50:17AM +0100, Jan-Benedict Glaw wrote: > Question in charge: Do DECstations really have floppies? Mine do > not... So vor me it's only relevant to have an nfsroot.tgz allowing > me to install further packages... Well - the Maxine (Personal DECstation) has a floppy controller and it was possible to order it with a floppy disk drive installed, but I have not seen one of these in real life yet :-). Greetings, Karsten -- #include Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung. From owner-linux-mips@oss.sgi.com Sun Dec 17 06:33:41 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 06:33:21 -0800 Received: from haliga.physik.TU-Cottbus.De ([141.43.75.9]:43792 "HELO haliga.physik.tu-cottbus.de") by oss.sgi.com with SMTP id ; Sun, 17 Dec 2000 06:32:59 -0800 Received: by haliga.physik.tu-cottbus.de (Postfix, from userid 7215) id 5A2C48D8F; Sun, 17 Dec 2000 15:32:54 +0100 (CET) Date: Sun, 17 Dec 2000 15:32:54 +0100 To: linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217153254.A21526@physik.tu-cottbus.de> References: <20001217020043.B29250@lug-owl.de> <200012171112.MAA12023@sparta.research.kpn.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200012171112.MAA12023@sparta.research.kpn.com>; from K.H.C.vanHouten@research.kpn.com on Sun, Dec 17, 2000 at 12:12:16PM +0100 From: heinold@physik.tu-cottbus.de (H.Heinold) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing hi, sorry for the missunderstanding. I meant the debian-bootfloppies and only the initrd which can be transfer with the kernel over tftp. I know sgi's only have flopticals. wiht the so called bootfloppies you will be able to install debian as on the other arch's. -- Henning Heinold From owner-linux-mips@oss.sgi.com Sun Dec 17 06:36:51 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 06:36:41 -0800 Received: from styx.cs.kuleuven.ac.be ([134.58.40.3]:50915 "EHLO styx.cs.kuleuven.ac.be") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 06:36:31 -0800 Received: from cassiopeia.home (root@dialup004.cs.kuleuven.ac.be [134.58.47.133]) by styx.cs.kuleuven.ac.be (8.10.1/8.10.1) with ESMTP id eBHEaHe29997; Sun, 17 Dec 2000 15:36:17 +0100 (MET) Received: from localhost (geert@localhost) by cassiopeia.home (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id NAA00910; Sun, 17 Dec 2000 13:51:19 +0100 X-Authentication-Warning: cassiopeia.home: geert owned process doing -bs Date: Sun, 17 Dec 2000 13:51:17 +0100 (CET) From: Geert Uytterhoeven To: Ralf Baechle cc: "Kevin D. Kissell" , Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: Little endian. In-Reply-To: <20001216124539.A6896@bacchus.dhis.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 16 Dec 2000, Ralf Baechle wrote: > On Fri, Dec 15, 2000 at 07:28:15PM +0100, Kevin D. Kissell wrote: > > If you want to run little-endian, you need to install > > the little-endian binaries and libraries. Since I needed > > to "swing both ways", I put both a big-endian root and > > a little-endian root partition on my Atlas disk, with user/data > > partitions that can be mounted on either one - fortunately, > > the Ext2FS metadata seems to be consistent regardless > > of endianness. > > Ext2fs on-disk data structures are defined to be little endian. Some very > old ext2 filesystems which afaik where all created on Linux/M68K were big > endian; for those e2fsck has the option to change the endianess of the > filesystem during a fsck run; the current kernel will refuse to accept > such big endian ext2 filesystems. For correctness: early Linux/PPC used big-endian ext2 as well. IIRC we switched to little-endian ext2 on m68k in late 1996, and on PPC in late 1997 / early 1998. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Sun Dec 17 07:32:11 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 07:32:01 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:17140 "EHLO lappi") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 07:31:46 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sun, 17 Dec 2000 08:28:03 -0700 Date: Sun, 17 Dec 2000 16:28:03 +0100 From: Ralf Baechle To: Harald Koerfgen Cc: Jan-Benedict Glaw , linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001217162802.A16298@bacchus.dhis.org> References: <20001217075015.A5352@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from Harald.Koerfgen@home.ivm.de on Sun, Dec 17, 2000 at 10:21:18AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Dec 17, 2000 at 10:21:18AM +0100, Harald Koerfgen wrote: > > Question in charge: Do DECstations really have floppies? Mine do > > not... So vor me it's only relevant to have an nfsroot.tgz allowing > > me to install further packages... > > Besides Maxines DECstations don't have floppies. Well, there are some with > SCSI floppies but that doesn't count. Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik have 20mb capacity. Ralf From owner-linux-mips@oss.sgi.com Sun Dec 17 09:20:32 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 09:20:21 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:22412 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 09:19:59 -0800 Received: from scotty.mgnet.de (p3E9EC69F.dip.t-dialin.net [62.158.198.159]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id SAA02474 for ; Sun, 17 Dec 2000 18:19:57 +0100 (MET) Received: (qmail 2317 invoked from network); 17 Dec 2000 17:19:56 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 17 Dec 2000 17:19:56 -0000 Date: Sun, 17 Dec 2000 18:19:56 +0100 (CET) From: Klaus Naumann To: Ralf Baechle cc: Linux/MIPS list Subject: Re: FAQ/ In-Reply-To: <20001217162802.A16298@bacchus.dhis.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, 17 Dec 2000, Ralf Baechle wrote: > Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik > have 20mb capacity. Indeed, I even own such a nifty thing. It's pretty cool, with one problem: No media ;-) . But it's able to read floppies, I'm altough not sure if it will boot. CU, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Sun Dec 17 10:07:22 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 10:07:02 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:50949 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 10:06:35 -0800 Received: from l04.research.kpn.com (l04.research.kpn.com [139.63.192.204]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXTL7SASYY00170B@research.kpn.com> for linux-mips@oss.sgi.com; Sun, 17 Dec 2000 19:06:32 +0100 Received: from kpn.com (aodi2.research.kpn.com [139.63.167.2]) by l04.research.kpn.com with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2653.13) id Y9TYGPKK; Sun, 17 Dec 2000 19:06:25 +0100 Date: Sun, 17 Dec 2000 19:06:18 +0100 From: Karel van Houten Subject: Kernel patch to make DECStation serial devfs aware. To: MIPS Linux list , "MIPS Linux list (FNET)" Message-id: <3A3D009A.CC605186@kpn.com> MIME-version: 1.0 X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.10 i686) Content-type: multipart/mixed; boundary="------------B556931F0E1CCED6BE2E1F56" X-Accept-Language: en Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------B556931F0E1CCED6BE2E1F56 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi all, I've attached a small patch to the DECStation serial drivers (zs.c and dz.c) in order to make them devfs aware. Would you please test this patch, and report any resulting problems? -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. --------------B556931F0E1CCED6BE2E1F56 Content-Type: text/plain; charset=us-ascii; name="dec-devfs.patch" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dec-devfs.patch" --- drivers/tc/zs.c.orig Sun Dec 17 15:59:21 2000 +++ drivers/tc/zs.c Sun Dec 17 12:30:07 2000 @@ -18,6 +18,7 @@ */ #include +#include #include #include #include @@ -1720,7 +1721,11 @@ memset(&serial_driver, 0, sizeof(struct tty_driver)); serial_driver.magic = TTY_DRIVER_MAGIC; +#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) + serial_driver.name = "tts/%d"; +#else serial_driver.name = "ttyS"; +#endif serial_driver.major = TTY_MAJOR; serial_driver.minor_start = 64; serial_driver.num = zs_channels_found; @@ -1730,7 +1735,7 @@ serial_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver.flags = TTY_DRIVER_REAL_RAW; + serial_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; serial_driver.refcount = &serial_refcount; serial_driver.table = serial_table; serial_driver.termios = serial_termios; @@ -1758,7 +1763,11 @@ * major number and the subtype code. */ callout_driver = serial_driver; +#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) + callout_driver.name = "cua/%d"; +#else callout_driver.name = "cua"; +#endif callout_driver.major = TTYAUX_MAJOR; callout_driver.subtype = SERIAL_TYPE_CALLOUT; @@ -1820,6 +1829,11 @@ printk("ttyS%02d at 0x%08x (irq = %d)", info->line, info->port, info->irq); printk(" is a Z85C30 SCC\n"); + tty_register_devfs(&serial_driver, 0, + serial_driver.minor_start + info->line); + tty_register_devfs(&callout_driver, 0, + callout_driver.minor_start + info->line); + } restore_flags(flags); --- drivers/char/dz.c.orig Sun Dec 17 15:59:36 2000 +++ drivers/char/dz.c Sun Dec 17 16:59:57 2000 @@ -21,9 +21,9 @@ #define DEBUG_DZ 1 +#include #ifdef MODULE #include -#include #else #define MOD_INC_USE_COUNT #define MOD_DEC_USE_COUNT @@ -1290,7 +1290,7 @@ int __init dz_init(void) { - int i, flags; + int i, flags, tmp; struct dz_serial *info; /* Setup base handler, and timer table. */ @@ -1300,7 +1300,11 @@ memset(&serial_driver, 0, sizeof(struct tty_driver)); serial_driver.magic = TTY_DRIVER_MAGIC; +#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) serial_driver.name = "ttyS"; +#else + serial_driver.name = "tts/%d"; +#endif serial_driver.major = TTY_MAJOR; serial_driver.minor_start = 64; serial_driver.num = DZ_NB_PORT; @@ -1309,7 +1313,7 @@ serial_driver.init_termios = tty_std_termios; serial_driver.init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - serial_driver.flags = TTY_DRIVER_REAL_RAW; + serial_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; serial_driver.refcount = &serial_refcount; serial_driver.table = serial_table; serial_driver.termios = serial_termios; @@ -1336,7 +1340,11 @@ * major number and the subtype code. */ callout_driver = serial_driver; +#if (LINUX_VERSION_CODE > 0x2032D && defined(CONFIG_DEVFS_FS)) callout_driver.name = "cua"; +#else + callout_driver.name = "cua/%d"; +#endif callout_driver.major = TTYAUX_MAJOR; callout_driver.subtype = SERIAL_TYPE_CALLOUT; @@ -1380,6 +1388,11 @@ return 0; printk("ttyS%02d at 0x%08x (irq = %d)\n", info->line, info->port, SERIAL); + + tty_register_devfs(&serial_driver, 0, + serial_driver.minor_start + info->line); + tty_register_devfs(&callout_driver, 0, + callout_driver.minor_start + info->line); } /* reset the chip */ --------------B556931F0E1CCED6BE2E1F56-- From owner-linux-mips@oss.sgi.com Sun Dec 17 10:28:51 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 10:28:41 -0800 Received: from wn42-146.sdc.org ([209.155.42.146]:56820 "EHLO lappi") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 10:28:26 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Sun, 17 Dec 2000 11:24:37 -0700 Date: Sun, 17 Dec 2000 19:24:37 +0100 From: Ralf Baechle To: Klaus Naumann Cc: Linux/MIPS list Subject: Re: FAQ/ Message-ID: <20001217192437.A22880@bacchus.dhis.org> References: <20001217162802.A16298@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from spock@mgnet.de on Sun, Dec 17, 2000 at 06:19:56PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Dec 17, 2000 at 06:19:56PM +0100, Klaus Naumann wrote: > > Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik > > have 20mb capacity. > > Indeed, I even own such a nifty thing. It's pretty cool, with one problem: > No media ;-) . But it's able to read floppies, I'm altough not sure > if it will boot. In theory it can. In practice every machine I've ever is violating the ARC standard massively, so only trying will show. For Indys probably the prefer installation media will stay NFS or CDROM for all times. Now if the darn thing would just handle ISO9660 CDROMs ... Ralf From owner-linux-mips@oss.sgi.com Sun Dec 17 10:32:52 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 10:32:32 -0800 Received: from po4.glue.umd.edu ([128.8.10.124]:41361 "EHLO po4.glue.umd.edu") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 10:32:15 -0800 Received: from z.glue.umd.edu (IDENT:root@z.glue.umd.edu [128.8.10.71]) by po4.glue.umd.edu (8.10.1/8.10.1) with ESMTP id eBHIWDv05497 for ; Sun, 17 Dec 2000 13:32:13 -0500 (EST) Received: from z.glue.umd.edu (IDENT:sendmail@localhost [127.0.0.1]) by z.glue.umd.edu (8.9.3/8.9.3) with SMTP id NAA14934 for ; Sun, 17 Dec 2000 13:32:13 -0500 (EST) Received: from localhost (weave@localhost) by z.glue.umd.edu (8.9.3/8.9.3) with ESMTP id NAA14930 for ; Sun, 17 Dec 2000 13:32:13 -0500 (EST) X-Authentication-Warning: z.glue.umd.edu: weave owned process doing -bs Date: Sun, 17 Dec 2000 13:32:12 -0500 (EST) From: Vince Weaver X-Sender: weave@z.glue.umd.edu To: linux-mips@oss.sgi.com Subject: Re: FAQ/ In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, 17 Dec 2000, Klaus Naumann wrote: > On Sun, 17 Dec 2000, Ralf Baechle wrote: > > > Well, a few Indys were shipped with 3.5" SCSI floptical drives which afaik > > have 20mb capacity. > > Indeed, I even own such a nifty thing. It's pretty cool, with one problem: > No media ;-) . But it's able to read floppies, I'm altough not sure > if it will boot. I've used an SGI personal-Iris 4D/35 which had a real floppy drive. Of course, I guess it's questionable whether the docs will ever surface to port Linux to it. It had a 36Mhz R3000 processor in it if I recall. Vince ____________ \ /\ /\ / Vince Weaver \/__\/__\/ weave@eng.umd.edu http://www.glue.umd.edu/~weave From owner-linux-mips@oss.sgi.com Sun Dec 17 11:34:22 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 11:34:12 -0800 Received: from rover.village.org ([204.144.255.66]:24842 "EHLO rover.village.org") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 11:33:55 -0800 Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.0/8.11.0) with ESMTP id eBHJXqs03814; Sun, 17 Dec 2000 12:33:52 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id MAA85322; Sun, 17 Dec 2000 12:33:51 -0700 (MST) Message-Id: <200012171933.MAA85322@harmony.village.org> To: jbglaw@lug-owl.de Subject: Re: FAQ/ Cc: linux-mips@oss.sgi.com In-reply-to: Your message of "Sun, 17 Dec 2000 07:50:17 +0100." <20001217075015.A5352@lug-owl.de> References: <20001217075015.A5352@lug-owl.de> <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> <20001217022955.A10064@physik.tu-cottbus.de> <20001217033438.B9742@bacchus.dhis.org> Date: Sun, 17 Dec 2000 12:33:51 -0700 From: Warner Losh Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing In message <20001217075015.A5352@lug-owl.de> Jan-Benedict Glaw writes: : Question in charge: Do DECstations really have floppies? Yes. I've used them with floppies. Warner From owner-linux-mips@oss.sgi.com Sun Dec 17 11:35:12 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 11:34:52 -0800 Received: from rover.village.org ([204.144.255.66]:25610 "EHLO rover.village.org") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 11:34:39 -0800 Received: from harmony.village.org (harmony.village.org [10.0.0.6]) by rover.village.org (8.11.0/8.11.0) with ESMTP id eBHJYVs03819; Sun, 17 Dec 2000 12:34:31 -0700 (MST) (envelope-from imp@harmony.village.org) Received: from harmony.village.org (localhost.village.org [127.0.0.1]) by harmony.village.org (8.9.3/8.8.3) with ESMTP id MAA85335; Sun, 17 Dec 2000 12:34:29 -0700 (MST) Message-Id: <200012171934.MAA85335@harmony.village.org> To: Harald Koerfgen Subject: Re: FAQ/ Cc: Jan-Benedict Glaw , linux-mips@oss.sgi.com In-reply-to: Your message of "Sun, 17 Dec 2000 10:21:18 +0100." References: Date: Sun, 17 Dec 2000 12:34:29 -0700 From: Warner Losh Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing In message Harald Koerfgen writes: : Besides Maxines DECstations don't have floppies. Well, there are some with SCSI : floppies but that doesn't count. I don't know if the floppies I used were scsi or not and I no longer have access to the machines to check :-) Warner From owner-linux-mips@oss.sgi.com Sun Dec 17 12:20:42 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 12:20:22 -0800 Received: from iris1.csv.ica.uni-stuttgart.de ([129.69.118.2]:13640 "EHLO iris1.csv.ica.uni-stuttgart.de") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 12:19:54 -0800 Received: from rembrandt.csv.ica.uni-stuttgart.de (rembrandt.csv.ica.uni-stuttgart.de [129.69.118.42]) by iris1.csv.ica.uni-stuttgart.de (8.9.3/8.9.3) with ESMTP id VAA314308; Sun, 17 Dec 2000 21:19:38 +0100 (MET) Received: from ica2_ts by rembrandt.csv.ica.uni-stuttgart.de with local (Exim 3.12 #1 (Debian)) id 147kHL-0006iV-00; Sun, 17 Dec 2000 21:19:31 +0100 Date: Sun, 17 Dec 2000 21:19:31 +0100 To: Carsten Langgaard Cc: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: 64 bit build fails Message-ID: <20001217211931.D25660@rembrandt.csv.ica.uni-stuttgart.de> Mail-Followup-To: ica2_ts, Carsten Langgaard , Ralf Baechle , linux-mips@oss.sgi.com References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> <3A39CC1F.8FE7B2FE@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <3A39CC1F.8FE7B2FE@mips.com>; from carstenl@mips.com on Fri, Dec 15, 2000 at 08:45:35AM +0100 From: Thiemo Seufer Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Carsten Langgaard wrote: [snip] >> Looks like an attempt to build a 64-bit Indy kernel. Various people working >> on the Origin support have completly broken the support for anything else in >> their battle tank-style approach ... > >Ok, that explains why a lot of things are broken. You might be interested in some work i have done [1] to create a 64-bit kernel for SGI IP28 aka Indigo2 Impact. Don't expect it to be less broken, it basically does an controlled crash at the very beginning of kernel initialization. (The IP28 Firmware doesn't like 32-bit ELF or even ecoff kernels.) >So who will be responsible for fixing all the broken pieces ? The one who asks about it, i assume. ;-) [1] http://www.csv.ica.uni-stuttgart.de/homes/ths/linux-mips/ Thiemo From owner-linux-mips@oss.sgi.com Sun Dec 17 12:22:52 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 12:22:42 -0800 Received: from viemta06.chello.at ([195.34.133.56]:63473 "EHLO viemta06.chello.at") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 12:22:34 -0800 Received: from katze.cyrius.com ([213.47.247.121]) by viemta06.chello.at (InterMail vK.4.02.00.10 201-232-116-110 license 9caa03a7df1d31c048ffcc0d31ac5855) with ESMTP id <20001217202230.VMM16613.viemta06@katze.cyrius.com>; Sun, 17 Dec 2000 21:22:30 +0100 Received: by katze.cyrius.com (Postfix, from userid 1000) id 99EBC1818F; Sun, 17 Dec 2000 21:23:34 +0100 (MET) Date: Sun, 17 Dec 2000 21:23:34 +0100 From: Martin Michlmayr To: Keith Owens Cc: linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation Message-ID: <20001217212334.A842@katze.cyrius.com> References: <20001216160051.A904@sumpf.cyrius.com> <23987.976979391@ocs3.ocs-net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <23987.976979391@ocs3.ocs-net>; from kaos@melbourne.sgi.com on Sun, Dec 17, 2000 at 02:09:51AM +1100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing * Keith Owens [20001217 02:09]: > The joys of cross system debugging. You need to set ksymoops option > -t, it is defaulting to elf32-i386 which is no good for mips objects. When I ran the program on Intel, I feared I might have to change something... anyway, I did it natively on mipsel now. I hope it's ok: With Karel van Houten's kernel from http://www.xs4all.nl/~vhouten/mipsel/vmlinux-2.4.0-decR3k.tgz ksymoops 2.3.5 on mips 2.0.34C52_SK. Options used -v vmlinux (specified) -K (specified) -L (specified) -O (specified) -m System.map (specified) Unable to handle kernel paging request at virtual address 00000004, epc == 800596b8, ra == 80059660 $0 : 00000000 10002000 80720380 00000000 00000000 801c38e0 10002000 80230000 $8 : 00002000 ffff00ff 00000000 00000000 00000000 00000000 ffffffff 81096180 $16: 00010f00 81094000 80048000 a000fcf8 30464354 a0002f88 fffffff4 00010f00 $24: 00000001 00000002 80720000 80720f58 80721090 80059660 epc : 800596b8 Using defaults from ksymoops -t elf32-littlemips -a mips:3000 Status: 10002004 Cause : 30000408 Process (pid: 0, stackpage=80720000) Stack: 00000008 0000000d 80060bc0 00000000 8020c020 00000001 00000000 00000000 00000000 80720f7c 80720f7c 80048518 00000000 00000000 00000000 80720f7c 80720f7c 80048518 00010f00 00000000 80048000 a000fcf8 30464354 a0002f88 00000200 001220d2 40208a0a 8004e988 8023e268 0000000a 80720fe0 00000000 8004b2cc ffff00ff 00010f00 00000000 80721090 00000000 ffffffff 81096180 00000000 ... Call Trace: [<80060bc0>] [<80048518>] [<80048518>] [<80048000>] [<8004e988>] [<8004b2cc>] Code: ac6b0004 8e2401d4 8e230218 <8c820004> 00000000 0043102b 1040043b 2416fff5 40036000 >>RA; 80059660 >>PC; 800596b8 <===== Trace; 80060bc0 Trace; 80048518 Trace; 80048518 Trace; 80048000 <__gnu_compiled_c+0/0> Trace; 8004e988 Trace; 8004b2cc With Flo's kernel from ftp://ftp.rfc822.org/pub/local/debian-mipsel/kernel/kernel-image-2.4.0-test8-pre1-dec-r3k.tar.gz ksymoops 2.3.5 on mips 2.0.34C52_SK. Options used -v vmlinux-2.4.0-test8-pre1 (specified) -K (specified) -L (specified) -O (specified) -m System.map-2.4.0-test8-pre1 (specified) Unable to handle kernel paging request at virtual address 00000004, epc == 800599f4, ra == 8005999c $0 : 00000000 10002000 80720370 00000000 00000000 00001098 10002000 0000003c $8 : 00002000 ffff00ff 00000000 00000000 00000000 00000000 801a9d94 10002001 $16: 00000f00 81098000 80048000 a000fcf8 30464354 a0002f88 fffffff4 00000f00 $24: 00000000 00000000 80720000 80720f58 80721090 8005999c epc : 800599f4 Using defaults from ksymoops -t elf32-littlemips -a mips:3000 Status: 10002004 Cause : 30000408 Process (pid: 0, stackpage=80720000) Stack: 800d7054 81086200 800613a8 00000001 00000008 80061064 00000000 00000000 00000000 80720f7c 80720f7c 801b6737 00000000 00000000 00000000 80720f7c 80720f7c 801b6737 00000f00 00000000 80048000 a000fcf8 30464354 a0002f88 00000200 001200d2 40208a0a 8004e934 00000000 00000020 80720fe0 0000000a 8004b2cc 0000003c 00000f00 00000000 80721090 0000003c 801b6748 801a9d94 00000000 ... Call Trace: [<800d7054>] [<800613a8>] [<80061064>] [<80048000>] [<8004e934>] [<8004b2cc>] Code: ac6b0004 8e2401d0 8e230214 <8c820004> 00000000 0043102b 10400442 2416fff5 40036000 Error (Oops_bfd_perror): set_section_contents Section has no contents >>RA; 8005999c >>PC; 800599f4 <===== Trace; 800d7054 Trace; 800613a8 Trace; 80061064 <__gnu_compiled_c+c4/138> Trace; 80048000 <__gnu_compiled_c+0/0> Trace; 8004e934 Trace; 8004b2cc 1 error issued. Results may not be reliable. -- Martin Michlmayr tbm@cyrius.com From owner-linux-mips@oss.sgi.com Sun Dec 17 23:23:14 2000 Received: by oss.sgi.com id ; Sun, 17 Dec 2000 23:23:04 -0800 Received: from mailout4-0.nyroc.rr.com ([24.92.226.120]:27584 "EHLO mailout4-0.nyroc.rr.com") by oss.sgi.com with ESMTP id ; Sun, 17 Dec 2000 23:22:51 -0800 Received: from rochester.rr.com (d1818233d.rochester.rr.com [24.24.35.61]) by mailout4-0.nyroc.rr.com (8.9.3/8.9.3) with ESMTP id CAA16854 for ; Mon, 18 Dec 2000 02:18:39 -0500 (EST) Message-ID: <3A3DBA75.2B535D4D@rochester.rr.com> Date: Mon, 18 Dec 2000 02:19:17 -0500 From: Pedro Ugalde X-Mailer: Mozilla 4.7 [en] (Win95; U) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: superdisk on indy Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing is it possible to put a parallel version of the imation superdisk (floptical) 120meg to an indy? how do i go about it running irix 6.2. sorry if off the topic but i don't know any other place to ask. Pedro Ugalde From owner-linux-mips@oss.sgi.com Mon Dec 18 00:12:45 2000 Received: by oss.sgi.com id ; Mon, 18 Dec 2000 00:12:35 -0800 Received: from mx.mips.com ([206.31.31.226]:33262 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Mon, 18 Dec 2000 00:12:11 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id AAA06374; Mon, 18 Dec 2000 00:12:04 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id AAA28304; Mon, 18 Dec 2000 00:12:02 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id JAA01484; Mon, 18 Dec 2000 09:11:39 +0100 (MET) Message-ID: <3A3DC6BA.DAC68261@mips.com> Date: Mon, 18 Dec 2000 09:11:38 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: 64 bit build fails References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> <3A39CC1F.8FE7B2FE@mips.com> <20001215162023.B28594@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > On Fri, Dec 15, 2000 at 08:45:35AM +0100, Carsten Langgaard wrote: > > > > > mips64-linux-gcc -D__KERNEL__ > > > > -I/home/soc/proj/work/carstenl/sw/linux-2.4.0/include -Wall > > > > -Wstrict-prototypes -O2 -fomit-frame-pointer -fno-strict-aliasing > > > > -mabi=64 -G 0 -mno-abicalls -fno-pic -Wa,--trap -pipe -mcpu=r8000 -mips4 > > > > -Wa,-32 -c head.S -o head.o > > > > head.S: Assembler messages: > > > > head.S:69: Error: Missing ')' assumed > > > > > > Looks like an attempt to build a 64-bit Indy kernel. Various people working > > > on the Origin support have completly broken the support for anything else in > > > their battle tank-style approach ... > > > > Ok, that explains why a lot of things are broken. > > So who will be responsible for fixing all the broken pieces ? > > This is the question you'd ask a company. This is Free Software, not some > company's product ... What I mean is that we need some discipline, as you mention yourself, it is unfortunate with this battle tank-style approach. And I think you do a pretty good job trying to make the rest of the code as clean as possible. Of course some time it is a little bit annoying you doesn't just accept my patches :-) Just kidding, I think that's the right way to do things. I was just hoping that the 64bit code was in the same condition as the rest of the code. /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Mon Dec 18 03:07:55 2000 Received: by oss.sgi.com id ; Mon, 18 Dec 2000 03:07:45 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:23561 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 18 Dec 2000 03:07:28 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 93A107FC; Mon, 18 Dec 2000 12:07:25 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id D608E8F74; Mon, 18 Dec 2000 12:07:14 +0100 (CET) Date: Mon, 18 Dec 2000 12:07:14 +0100 From: Florian Lohoff To: Martin Michlmayr Cc: linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation Message-ID: <20001218120714.C401@paradigm.rfc822.org> References: <20001216085603.A514@sumpf.cyrius.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001216085603.A514@sumpf.cyrius.com>; from tbm@cyrius.com on Sat, Dec 16, 2000 at 08:56:03AM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Dec 16, 2000 at 08:56:03AM +0100, Martin Michlmayr wrote: > Linux version 2.4.0-test8-pre1 (flo@slimer.rfc822.org) (gcc version egcs-2.90.20 [...] > Any ideas? (I hope and think that it has nothing to do with me > booting from a NetBSD partition. I don't have ethernet on the machine > and thus have to boot the kernel from the existing FFS partition in > order to start Linux and then run delo. NetBSD boots and works, btw.) I have the suspicion that you are running into a bug Harald and me solved when booting my /150 from Disk. It seems the Firmware KN04 V2.1k doesnt correctly reset/disable the SCSI Controller and the Ethernet chip causing the system to crash immediatly in the "request_irq" section. I guess the backtrace is bogus but i might be wrong. I would recommend trying to compile a current cvs kernel yourself and retry. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Dec 18 03:07:55 2000 Received: by oss.sgi.com id ; Mon, 18 Dec 2000 03:07:35 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:23305 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 18 Dec 2000 03:07:28 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 740657F9; Mon, 18 Dec 2000 12:07:25 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 398F28F74; Mon, 18 Dec 2000 11:59:19 +0100 (CET) Date: Mon, 18 Dec 2000 11:59:19 +0100 From: Florian Lohoff To: Ralf Baechle Cc: "H.Heinold" , linux-mips@oss.sgi.com Subject: Re: FAQ/ Message-ID: <20001218115919.B401@paradigm.rfc822.org> References: <3A36AFFE.51C9F2B@web.de> <20001213135723.B3060@paradigm.rfc822.org> <3A3C0ACE.8A13EA97@web.de> <20001217020043.B29250@lug-owl.de> <20001217022955.A10064@physik.tu-cottbus.de> <20001217033438.B9742@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001217033438.B9742@bacchus.dhis.org>; from ralf@oss.sgi.com on Sun, Dec 17, 2000 at 03:34:38AM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Dec 17, 2000 at 03:34:38AM +0100, Ralf Baechle wrote: > > Hm I am still working on the boot floppies for debian, when I have the time. > > for mipsel they should work, but I only build them for mips. > > the problem on mips was the sgi disklabel, but that isnt used on dec. > > But SGI's don't have floppies :-) > The package is only called "boot-floppies" - It doesnt have much in common with "floppy" images on architectures not having floppy drives. It more or less the debian installer source package. They for example build kernel/ramdisk images with the installer for architectures capable of bootp/tftp like Sun SPARC. We will do similar for Decstations and SGI and forget the "real" disk images. The problem is that most of the software is more or less custom debian and will require some work concerning SGI Disklabel, Kernel 2.4 etc - Henning has done a lot in there and hopefully Decstations are much simpler (DOS Disklabel) But still - The biggest problems are glibc, gcc + binutils. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Mon Dec 18 10:47:49 2000 Received: by oss.sgi.com id ; Mon, 18 Dec 2000 10:47:39 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:27888 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Mon, 18 Dec 2000 10:47:26 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBIIjVx21673; Mon, 18 Dec 2000 10:45:31 -0800 Message-ID: <3A3E5C14.F116DCBB@mvista.com> Date: Mon, 18 Dec 2000 10:48:52 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Keith Owens CC: Martin Michlmayr , linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation References: <23987.976979391@ocs3.ocs-net> Content-Type: multipart/mixed; boundary="------------BC952409A8789C82CC1074A8" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------BC952409A8789C82CC1074A8 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Keith Owens wrote: > > On Sat, 16 Dec 2000 16:00:51 +0100, > Martin Michlmayr wrote: > >ksymoops 2.3.5 on i586 2.2.15. Options used > > -a mipsel > >Using defaults from ksymoops -t elf32-i386 > > The joys of cross system debugging. You need to set ksymoops option > -t, it is defaulting to elf32-i386 which is no good for mips objects. > You almost certainly need to set environment variables KSYMOOPS_NM and > KSYMOOPS_OBJDUMP to point to versions of these programs that understand > mips. If mips prints the code in big endian format then you need to > use ksymoops option -e. man ksymoops and scan for 'cross'. Martin, If you have System.map file, you can use a perl script written by Phil to decode the trace. Jun --------------BC952409A8789C82CC1074A8 Content-Type: text/plain; charset=us-ascii; name="call2sym" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="call2sym" #!/usr/bin/perl # call2sym - convert linux kernel oops call trace listings to System.map # symbolic names. # # Written by Phil Hollenback # Copyright (C) 2000 Phil Hollenback # # This software may be used and distributed according to the terms # of the GNU General Public License, incorporated herein by reference. # All other rights reserved. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # See the perlpod documentation at the end of this file for # instructions. # # $Id: call2sym,v 1.2 2000/09/28 20:15:59 phil Exp $ # # Configuration Options # # This will be viewable thru the "-v" switch at a later date. $version = "0.0.1"; # # End Configuration Options # # Check that we got passed a System.map file on the command line. (scalar(@ARGV) == 1) or $mapfile = "System.map"; (scalar(@ARGV) == 1) and $mapfile = $ARGV[0]; ( -r $mapfile ) or die "Can't read file $mapfile\n"; print "Ready for call trace list. on a blank line when done.\n\n"; while () { # remove newlines in case this was a cut-n-paste. chop; $trace_line .= $_; } print "\nProcessing...\n"; # Now munge call trace entries into an array. @trace_addrs = (); # Split into an array of addresses, on whitespace. @trace_addrs = split / /,$trace_line; # I think I'm clever, so use a map to remove cruft from each array # entry. @trace_addrs = map { m|\[<(.*)>\]| } @trace_addrs; # I now have an in-order array of the call trace addresses. # Suck the whole mapfile into a hash keyed on address. Convert keys to # decimal for easier compares later on. open MAPFILE, $mapfile or die "Can't open mapfile $mapfile\n"; while () { if ( /^00000000(.*) . (.*)/ ) { # convert to decimal and pad to 10 digits. # that way everything lines up and conversions should be easy. $decaddr = sprintf "%010lu", hex($1); $funcs{$decaddr} = $2; } } # print a header print "\nAddress\t\tFunction\n\n"; # We've got all the addresses in the hash as string versions of # decimal numbers. Should now be able to iterate thru the # list until we find the one closest to each $addr. foreach $addr (@trace_addrs) { # convert addr to decimal. $decaddr = hex($addr); # loop through keys until we find the one just 1 greater. foreach $func (sort keys %funcs) { # now print out the one just 1 less. if ($func > $decaddr ) { print "$addr\t$funcs{$lastfunc}\n"; last; } $lastfunc = $func; } } --------------BC952409A8789C82CC1074A8-- From owner-linux-mips@oss.sgi.com Mon Dec 18 18:02:42 2000 Received: by oss.sgi.com id ; Mon, 18 Dec 2000 18:02:32 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:58104 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Mon, 18 Dec 2000 18:02:15 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBJ20Mx09566; Mon, 18 Dec 2000 18:00:22 -0800 Message-ID: <3A3EC1FF.9B86E2AC@mvista.com> Date: Mon, 18 Dec 2000 18:03:43 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: MIPS_ATOMIC_SET in sys_sysmips() Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing It looks like sometime after test5 the MIPS_ATOMIC_SET case in sys_sysmips() function in the CVS tree is changed. The new code now uses ll/sc instructions and handles syscall trace, etc.. This change does not make sense to me. The userland typically uses MIPS_ATOMIC_SET when ll/sc instructions are not available. But the new code itself uses ll/sc, which pretty much forfeit the purpose. Or do I miss something else? What do we offer to machines without ll/sc? BTW, what is the wrong with previous code? I understand it may be broken in SMP case, but I think that is fixable. Comments? Jun From owner-linux-mips@oss.sgi.com Tue Dec 19 04:47:56 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 04:47:47 -0800 Received: from viemta06.chello.at ([195.34.133.56]:54779 "EHLO viemta06.chello.at") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 04:47:31 -0800 Received: from katze.cyrius.com ([213.47.247.121]) by viemta06.chello.at (InterMail vK.4.02.00.10 201-232-116-110 license 9caa03a7df1d31c048ffcc0d31ac5855) with ESMTP id <20001219124728.EJOX16613.viemta06@katze.cyrius.com>; Tue, 19 Dec 2000 13:47:28 +0100 Received: by katze.cyrius.com (Postfix, from userid 1000) id 5BD2318198; Tue, 19 Dec 2000 13:48:29 +0100 (MET) Date: Tue, 19 Dec 2000 13:48:29 +0100 From: Martin Michlmayr To: Florian Lohoff Cc: linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation Message-ID: <20001219134828.A361@katze.cyrius.com> References: <20001216085603.A514@sumpf.cyrius.com> <20001218120714.C401@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="MGYHOYXEY6WxJCY8" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001218120714.C401@paradigm.rfc822.org>; from flo@rfc822.org on Mon, Dec 18, 2000 at 12:07:14PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --MGYHOYXEY6WxJCY8 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline * Florian Lohoff [20001218 12:07]: > I have the suspicion that you are running into a bug Harald and me > solved when booting my /150 from Disk. It seems the Firmware KN04 V2.1k > > I guess the backtrace is bogus but i might be wrong. I would recommend > trying to compile a current cvs kernel yourself and retry. I compiled a current CVS kernel (as of 2000-Dec-18) and I still get the same problem: KN02-BA V5.7e (PC: 0xbfc00cbc, SP: 0xa000f404) ^C >>boot 3/rz2/vmlinux root=/dev/sda1 console=ttyS2 >> NetBSD/pmax Secondary Boot, Revision 1.0 >> (root@vlad, Sat Mar 4 14:34:30 EST 2000) Boot: 3/rz2/vmlinux 1589960+134048+142976 [204+126192+119611]=0x205ebc Starting at 0x800405ac This DECstation is a DS5000/1xx Loading R[23]00 MMU routines. CPU revision is: 00000230 Primary instruction cache 64kb, linesize 4 bytes Primary data cache 64kb, linesize 4 bytes Linux version 2.4.0-test11 (tbm@katze.cyrius.com) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #6 Mon Dec 18 18:47:44 MET 2000 Determined physical RAM map: memory: 02000000 @ 00000000 (usable) On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS2 Calibrating delay loop... 24.71 BogoMIPS Memory: 30128k/32768k available (1552k kernel code, 2640k reserved, 70k data, 60k init) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX Unable to handle kernel paging request at virtual address 00000004, epc == 8005a16c, ra == 8005a124 Oops in fault.c:do_page_fault, line 172: $0 : 00000000 10002000 80720410 00000000 80720410 00000000 81088460 10002000 $8 : 00000000 00000000 00000000 00000000 00bc8000 fffffff7 ffffffff 8021f180 $16: 00010f00 8021c000 00000000 80048000 30464354 a0002f88 fffffff4 00010f00 $24: 00000001 0000000a 80720000 80720f58 80721090 8005a124 epc : 8005a16c Status: 10002004 Cause : 30000008 Process (pid: 0, stackpage=80720000) Stack: 80061d94 00000001 000000c0 80061a58 801e0eec 800f82fc 00000000 00000000 00000000 80720f7c 80720f7c 00000023 00000000 00000000 00000000 80720f7c 80720f7c 00000023 00010f00 00010000 00000000 80048000 30464354 a0002f88 bfc00cbc a000f404 40208a0a 8004e1a8 00000000 00000020 80720fe0 00000000 8004b46c 00002617 00010f00 00000000 80721090 00002617 00bc8000 fffffff7 00000000 ... Call Trace: [<80061d94>] [<80061a58>] [<800f82fc>] [<80048000>] [<8004e1a8>] [<8004b46c>] Code: 24630010 8e2501d4 8e230218 <8ca20004> 00000000 0043102b 10400431 2416fff5 40046000 sym2call says: Address Function 80061d94 tasklet_hi_action 80061a58 do_softirq 800f82fc do_IRQ 80048000 init 8004e1a8 _sys_clone 8004b46c stack_done The config file used to build the kernel is enclosed below. -- Martin Michlmayr tbm@cyrius.com --MGYHOYXEY6WxJCY8 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=config # # Automatically generated by make menuconfig: don't edit # # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Machine selection # # CONFIG_ACER_PICA_61 is not set # CONFIG_ALGOR_P4032 is not set # CONFIG_BAGET_MIPS is not set CONFIG_DECSTATION=y # CONFIG_DDB5074 is not set # CONFIG_DDB5476 is not set # CONFIG_MIPS_EV96100 is not set # CONFIG_MIPS_EV64120 is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_MAGNUM_4000 is not set # CONFIG_OLIVETTI_M700 is not set # CONFIG_PMC_CP7000 is not set # CONFIG_SGI_IP22 is not set # CONFIG_SNI_RM200_PCI is not set # CONFIG_MCA is not set # CONFIG_SBUS is not set # CONFIG_ISA is not set # CONFIG_EISA is not set # CONFIG_PCI is not set # CONFIG_I8259 is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # CPU selection # CONFIG_CPU_R3000=y # CONFIG_CPU_R6000 is not set # CONFIG_CPU_R4300 is not set # CONFIG_CPU_R4X00 is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set # CONFIG_CPU_R10000 is not set # CONFIG_CPU_MIPS32 is not set # CONFIG_CPU_ADVANCED is not set # CONFIG_CPU_HAS_LLSC is not set CONFIG_CPU_HAS_WB=y # # General setup # CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_MIPS_FPU_EMULATOR=y CONFIG_KCORE_ELF=y CONFIG_ELF_KERNEL=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_NET=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # # Parallel port support # # CONFIG_PARPORT is not set CONFIG_TC=y # CONFIG_PCMCIA is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_BLK_DEV_LVM is not set # CONFIG_LVM_PROC_FS is not set # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK is not set # CONFIG_NETFILTER is not set # CONFIG_FILTER is not set CONFIG_UNIX=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # SCSI support # CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 # CONFIG_CHR_DEV_ST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_SR_EXTRA_DEVS=2 # CONFIG_CHR_DEV_SG is not set # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # CONFIG_SCSI_DECNCR=y # CONFIG_SCSI_DECSII is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_DEBUG is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_SLIP is not set # CONFIG_PPP is not set CONFIG_DECLANCE=y # # DECStation Character devices # # CONFIG_VT is not set CONFIG_SERIAL=y # CONFIG_DZ is not set CONFIG_ZS=y CONFIG_SERIAL_CONSOLE=y # CONFIG_UNIX98_PTYS is not set CONFIG_RTC=y # # File systems # # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_RAMFS is not set CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set # CONFIG_MINIX_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set # CONFIG_DEVPTS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_SYSV_FS_WRITE is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_CODA_FS is not set CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set CONFIG_ROOT_NFS=y CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_MOUNT_SUBDIR is not set # CONFIG_NCPFS_NDS_DOMAINS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_SGI_PARTITION is not set CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y # CONFIG_NLS is not set # # USB support # # CONFIG_USB is not set # # Input core support # # CONFIG_INPUT is not set # # Kernel hacking # CONFIG_CROSSCOMPILE=y # CONFIG_MIPS_FPE_MODULE is not set # CONFIG_REMOTE_DEBUG is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_MIPS_UNCACHED is not set --MGYHOYXEY6WxJCY8-- From owner-linux-mips@oss.sgi.com Tue Dec 19 05:30:16 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 05:30:06 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:30611 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 05:29:51 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA13387; Tue, 19 Dec 2000 14:25:34 +0100 (MET) Date: Tue, 19 Dec 2000 14:25:33 +0100 (MET) From: "Maciej W. Rozycki" To: Jun Sun , Ralf Baechle cc: linux-mips@oss.sgi.com Subject: Re: MIPS_ATOMIC_SET in sys_sysmips() In-Reply-To: <3A3EC1FF.9B86E2AC@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 18 Dec 2000, Jun Sun wrote: > It looks like sometime after test5 the MIPS_ATOMIC_SET case in sys_sysmips() > function in the CVS tree is changed. The new code now uses ll/sc instructions > and handles syscall trace, etc.. > > This change does not make sense to me. The userland typically uses > MIPS_ATOMIC_SET when ll/sc instructions are not available. But the new code > itself uses ll/sc, which pretty much forfeit the purpose. Or do I miss > something else? There is no problem with using ll/sc in sysmips() itself for machines that support them. > What do we offer to machines without ll/sc? I asked Ralf for a clarification of the sysmips(MIPS_ATOMIC_SET, ...) call before I write better code. No response so far. I'm now really cosidering implementing the Ultrix atomic_op() syscall -- at least it has a well-known defined behaviour. > BTW, what is the wrong with previous code? I understand it may be broken in > SMP case, but I think that is fixable. Comments? The previous code was definitely broken -- depending on the path taken it would return either the value fetched from memory or an error code. No way to distinguish between them. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Dec 19 09:03:36 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 09:03:26 -0800 Received: from mail.ivm.net ([62.204.1.4]:53799 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 09:03:19 -0800 Received: from franz.no.dom (port53.duesseldorf.ivm.de [195.247.65.53]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id SAA21034; Tue, 19 Dec 2000 18:02:53 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20001219134828.A361@katze.cyrius.com> Date: Tue, 19 Dec 2000 18:03:00 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Martin Michlmayr Subject: Re: Kernel Oops when booting on DECstation Cc: linux-mips@oss.sgi.com, Florian Lohoff Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 19-Dec-00 Martin Michlmayr wrote: [Oops on DECstation boot on a /125] > I compiled a current CVS kernel (as of 2000-Dec-18) and I still get > the same problem: > > KN02-BA V5.7e (PC: 0xbfc00cbc, SP: 0xa000f404) > ^C >>>boot 3/rz2/vmlinux root=/dev/sda1 console=ttyS2 >>> NetBSD/pmax Secondary Boot, Revision 1.0 >>> (root@vlad, Sat Mar 4 14:34:30 EST 2000) [...] > The config file used to build the kernel is enclosed below. Strange, I am not able to reproduce this here on a /133 (KN02-BA V5.7j). My box boots just fine. >>boot 3/tftp/vmlinux.r3k console=ttyS2 root=/dev/sda7 1597440+134048+143008 This DECstation is a DS5000/1xx Loading R[23]00 MMU routines. CPU revision is: 00000230 Primary instruction cache 64kb, linesize 4 bytes Primary data cache 128kb, linesize 4 bytes Linux version 2.4.0-test11 (harry@intel) (gcc version egcs-2.91.66 19990314 Determined physical RAM map: memory: 03000000 @ 00000000 (usable) [...] VFS: Mounted root (ext2 filesystem) readonly. Freeing unused PROM memory: 124k freed Freeing unused kernel memory: 60k freed INIT: version 2.74 booting Activating swap partitions hostname: localhost Checking root filesystems. [...] Is anybody else successfully using the NetBSD bootloader with a Linux kernel? -- Regards, Harald From owner-linux-mips@oss.sgi.com Tue Dec 19 09:09:15 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 09:09:06 -0800 Received: from mail.ivm.net ([62.204.1.4]:41513 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 09:08:55 -0800 Received: from franz.no.dom (port53.duesseldorf.ivm.de [195.247.65.53]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id SAA21041; Tue, 19 Dec 2000 18:02:55 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: Date: Tue, 19 Dec 2000 18:03:01 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: "Maciej W. Rozycki" Subject: Re: MIPS_ATOMIC_SET in sys_sysmips() Cc: linux-mips@oss.sgi.com, Ralf Baechle , Jun Sun Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 19-Dec-00 Maciej W. Rozycki wrote: > On Mon, 18 Dec 2000, Jun Sun wrote: >> What do we offer to machines without ll/sc? > > I asked Ralf for a clarification of the sysmips(MIPS_ATOMIC_SET, ...) > call before I write better code. No response so far. I'm now really > cosidering implementing the Ultrix atomic_op() syscall -- at least it has > a well-known defined behaviour. Another possibility would be to rely on the userland ll/sc emulation in the kernel. The one in the linux-vr tree seems to be working well and can easily be backported to Linux/MIPS. Advantage: userland binary compatibility. Disadvantage: possibility for a lot of context switches for userland atomic operations. Having a sysmips(MIPS_ATOMIC_SET, ...) or atomic_op() solution would probably a lot faster. Maybe we should implement both :) -- Regards, Harald From owner-linux-mips@oss.sgi.com Tue Dec 19 09:09:45 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 09:09:36 -0800 Received: from hermes.research.kpn.com ([139.63.192.8]:6404 "EHLO hermes.research.kpn.com") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 09:09:30 -0800 Received: from sparta.research.kpn.com (sparta.research.kpn.com [139.63.192.6]) by research.kpn.com (PMDF V5.2-31 #42699) with ESMTP id <01JXWBSOTPKI0015S2@research.kpn.com> for linux-mips@oss.sgi.com; Tue, 19 Dec 2000 18:09:26 +0100 Received: (from karel@localhost) by sparta.research.kpn.com (8.8.8+Sun/8.8.8) id SAA18908; Tue, 19 Dec 2000 18:09:25 +0100 (MET) X-URL: http://www-lsdm.research.kpn.com/~karel Date: Tue, 19 Dec 2000 18:09:25 +0100 (MET) From: Karel van Houten Subject: Re: Kernel Oops when booting on DECstation In-reply-to: To: Harald.Koerfgen@home.ivm.de Cc: tbm@cyrius.com (Martin Michlmayr), linux-mips@oss.sgi.com, flo@rfc822.org (Florian Lohoff) Message-id: <200012191709.SAA18908@sparta.research.kpn.com> MIME-version: 1.0 X-Mailer: ELM [version 2.5 PL2] Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Harald wrote: > > Is anybody else successfully using the NetBSD bootloader with a Linux kernel? > I used to use the NetBSD bootloader just fine, but switched to delo recently, which is easier to use because UFS read-write support is not stable in the current kernels. -- Karel van Houten ---------------------------------------------------------- The box said "Requires Windows 95 or better." I can't understand why it won't work on my Linux computer. ---------------------------------------------------------- From owner-linux-mips@oss.sgi.com Tue Dec 19 09:52:05 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 09:51:56 -0800 Received: from brutus.conectiva.com.br ([200.250.58.146]:22510 "EHLO dhcp046.distro.conectiva") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 09:51:44 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Tue, 19 Dec 2000 15:47:59 -0200 Date: Tue, 19 Dec 2000 15:47:59 -0200 From: Ralf Baechle To: Carsten Langgaard Cc: linux-mips@oss.sgi.com Subject: Re: 64 bit build fails Message-ID: <20001219154759.A6566@bacchus.dhis.org> References: <3A379CBC.ED1D9F@mips.com> <20001214215933.C28871@bacchus.dhis.org> <3A39CC1F.8FE7B2FE@mips.com> <20001215162023.B28594@bacchus.dhis.org> <3A3DC6BA.DAC68261@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A3DC6BA.DAC68261@mips.com>; from carstenl@mips.com on Mon, Dec 18, 2000 at 09:11:38AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 18, 2000 at 09:11:38AM +0100, Carsten Langgaard wrote: > Of course some time it is a little bit annoying you doesn't just accept > my patches :-) Just kidding, I think that's the right way to do things. Actually I tried to apply the patch but patch thinks your patch isn't a valid patch file ... > I was just hoping that the 64bit code was in the same condition as the > rest of the code. Depends. It's running fairly well on Origins; nobody made a more than halfbreed attempt to support IP22 for mips64, so what you see was kind of what had to be expected. Ralf From owner-linux-mips@oss.sgi.com Tue Dec 19 10:02:35 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 10:02:25 -0800 Received: from gatekeep.ti.com ([192.94.94.61]:30125 "EHLO gatekeep.ti.com") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 10:02:16 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by gatekeep.ti.com (8.11.1/8.11.1) with ESMTP id eBJI2AH24746 for ; Tue, 19 Dec 2000 12:02:10 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA24408 for ; Tue, 19 Dec 2000 12:02:09 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA24394 for ; Tue, 19 Dec 2000 12:02:09 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.194]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA07870 for ; Tue, 19 Dec 2000 12:02:08 -0600 (CST) Message-ID: <3A3FA2FD.B6B8CAD1@ti.com> Date: Tue, 19 Dec 2000 11:03:41 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: 1.0.3 = larger apps Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I am starting to cross-compile a bunch of the userland apps using the 1.0.3a-2 and binutils 2.8.1-1. I have noticed that each app has grown about 10% (after stripping) over the original Hardhat distribution of the app at the same rev. Since we are in a size constrained environment I am trying to get the apps as small as possible. Is this growth normal? Are there particular command line switches (or other tricks) during the build which will produce smaller apps? -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Tue Dec 19 10:08:26 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 10:08:16 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:30615 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 10:08:07 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id TAA25861; Tue, 19 Dec 2000 19:03:01 +0100 (MET) Date: Tue, 19 Dec 2000 19:03:00 +0100 (MET) From: "Maciej W. Rozycki" To: Harald Koerfgen cc: linux-mips@oss.sgi.com, Ralf Baechle , Jun Sun Subject: Re: MIPS_ATOMIC_SET in sys_sysmips() In-Reply-To: Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 19 Dec 2000, Harald Koerfgen wrote: > Another possibility would be to rely on the userland ll/sc emulation in the > kernel. The one in the linux-vr tree seems to be working well and can easily be > backported to Linux/MIPS. This should work but it looks ugly to me and the performance would suck horribly. > Advantage: userland binary compatibility. > Disadvantage: possibility for a lot of context switches for userland atomic > operations. We may implement the emulation anyway, just like we emulate unaligned accesses. > Having a sysmips(MIPS_ATOMIC_SET, ...) or atomic_op() solution would probably a > lot faster. > > Maybe we should implement both :) If we could afford another syscall number then I would prefer atomic_op() at the moment as it is well-documented and it does not overload one function for various purposes, i.e. it's a bit faster. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Dec 19 10:40:08 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 10:39:55 -0800 Received: from gateway-1237.mvista.com ([12.44.186.158]:40692 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 10:39:41 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eBJIZGx06141; Tue, 19 Dec 2000 10:35:16 -0800 Message-ID: <3A3FAB2B.35F0148E@mvista.com> Date: Tue, 19 Dec 2000 10:38:35 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: "Maciej W. Rozycki" CC: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: MIPS_ATOMIC_SET in sys_sysmips() References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Maciej W. Rozycki" wrote: > > On Mon, 18 Dec 2000, Jun Sun wrote: > > > It looks like sometime after test5 the MIPS_ATOMIC_SET case in sys_sysmips() > > function in the CVS tree is changed. The new code now uses ll/sc instructions > > and handles syscall trace, etc.. > > > > This change does not make sense to me. The userland typically uses > > MIPS_ATOMIC_SET when ll/sc instructions are not available. But the new code > > itself uses ll/sc, which pretty much forfeit the purpose. Or do I miss > > something else? > > There is no problem with using ll/sc in sysmips() itself for machines > that support them. > Sure - but with ll/sc available the user programs don't need to issue sysmip(MIPS_ATOMIC_SET,...) at the first place ... > > What do we offer to machines without ll/sc? > > I asked Ralf for a clarification of the sysmips(MIPS_ATOMIC_SET, ...) > call before I write better code. No response so far. I'm now really > cosidering implementing the Ultrix atomic_op() syscall -- at least it has > a well-known defined behaviour. > Where can I find the definitino of atomic_op()? Or can you tell us a little more about it? > > BTW, what is the wrong with previous code? I understand it may be broken in > > SMP case, but I think that is fixable. Comments? > > The previous code was definitely broken -- depending on the path taken it > would return either the value fetched from memory or an error code. No > way to distinguish between them. > I notice that. I notice glibc is the only "customer" of the MIPS_SET_ATOMIC call, the bug does not appear to be a big deal because error should not happen. Of course, it will be nice to fix it. Jun From owner-linux-mips@oss.sgi.com Tue Dec 19 10:50:55 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 10:50:46 -0800 Received: from router.isratech.ro ([193.226.114.69]:6918 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Tue, 19 Dec 2000 10:50:36 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBJIoGp21651; Tue, 19 Dec 2000 20:50:17 +0200 Message-ID: <3A401C4D.C3FAB4D4@isratech.ro> Date: Tue, 19 Dec 2000 21:41:17 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Carsten Langgaard , linux-mips@oss.sgi.com Subject: Re: Writting flash. References: <20001219091316.10085.qmail@nw175.netaddress.usa.net> <3A3F3C6E.39C64947@mips.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello Carsten, I folowed the ATLAS instructions but when I do cat flashimage > /dev/lp0 it get stucked at the first write . I will send you what message I get when I run strace cat flashimage > /dev/lp0. open("claudiuwright", O_RDONLY|O_LARGEFILE) = 3 fstat(3, {st_mode=S_IFREG|0664, st_size=2479223, ...}) = 0 read(3, "!R\n@1c000000\n>UploadSS\n!E\n000000"..., 512) = 512 write(1, "!R\n@1c000000\n>UploadSS\n!E\n000000"..., 512 Do you have any ideea ? Please try to give me a clue because in the ATLAS docs says that I have to set the parallel prot to Generic text only and I do not know how to do that. Second I guess that it stucks from other reasons . Best Regards, Nicu Carsten Langgaard wrote: > It should be straight forward, just follow the Atlas documentation. > I don't think you need to do anything with the parallel port, except that you > need parallel port support on you linux PC, of course. > > /Carsten > > POPOVICI Nicolae wrote: > > > Hello Carlsten, > > > > My address is actually octavpo@isratech.ro but I need an answer to my > > problem. > > So I have to write the system flash on an ATLAS board. PLease tell me how do I > > do that. I read the manuals that come with the board and there it says that I > > have to set the parallel port to "Generic text only". How do I do that on a > > LINUX machine ? Then I just copy the file that I want to write in system flash > > to the parallel port , am I correct ? > > I do not have to convert the file that I want to write in FLASH in a text only > > format !!!! Am I correct ? > > > > Please try to tell me how can I write the system flash with as much details as > > you can. > > > > Regards, > > Nicu > > > > > > > > ____________________________________________________________________ > > Get free email and a permanent address at http://www.netaddress.com/?N=1 > > -- > _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com > |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 > | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 > TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 > Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Tue Dec 19 14:20:25 2000 Received: by oss.sgi.com id ; Tue, 19 Dec 2000 14:20:15 -0800 Received: from pobox.sibyte.com ([208.12.96.20]:44045 "HELO pobox.sibyte.com") by oss.sgi.com with SMTP id ; Tue, 19 Dec 2000 14:19:54 -0800 Received: from baton.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id 99755205FA for ; Tue, 19 Dec 2000 14:19:48 -0800 (PST) Received: from SMTP agent by mail gateway Tue, 19 Dec 2000 14:14:56 -0800 Received: by baton.sibyte.com (Postfix, from userid 61017) id 7727F56D6; Tue, 19 Dec 2000 14:19:48 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: linux-mips@oss.sgi.com Subject: statically linked big endian mips linux bash? Date: Tue, 19 Dec 2000 14:12:12 -0800 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <0012191419480X.28390@baton.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Does anyone have a pointer to somewhere I can DL a big-endian mips linux statically linked bash binary? I'm in the process of bringing up the cross libraries to build one, but since that's going to take a while, I'd like to get my hands on a preextant binary. Searching on google/altavista hasn't yielded anything promising. Any pointers would be appreciated! Thanks, Justin carlson@sibyte.com From owner-linux-mips@oss.sgi.com Wed Dec 20 02:30:19 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 02:29:59 -0800 Received: from mx.mips.com ([206.31.31.226]:30096 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 20 Dec 2000 02:29:34 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id CAA28513; Wed, 20 Dec 2000 02:29:14 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id CAA15553; Wed, 20 Dec 2000 02:29:11 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id LAA29988; Wed, 20 Dec 2000 11:28:46 +0100 (MET) Message-ID: <3A4089DD.16FBBAF7@mips.com> Date: Wed, 20 Dec 2000 11:28:45 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: Writting flash. References: <20001219091316.10085.qmail@nw175.netaddress.usa.net> <3A3F3C6E.39C64947@mips.com> <3A401C4D.C3FAB4D4@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Nicu Popovici wrote: > Hello Carsten, > > I folowed the ATLAS instructions but when I do cat flashimage > /dev/lp0 it get > stucked at the first write . I will send you what message I get when I run strace > cat flashimage > /dev/lp0. > > open("claudiuwright", O_RDONLY|O_LARGEFILE) = 3 > fstat(3, {st_mode=S_IFREG|0664, st_size=2479223, ...}) = 0 > read(3, "!R\n@1c000000\n>UploadSS\n!E\n000000"..., 512) = 512 > write(1, "!R\n@1c000000\n>UploadSS\n!E\n000000"..., 512 > > Do you have any ideea ? > > Please try to give me a clue because in the ATLAS docs says that I have to set the > parallel prot to Generic text only and I do not know how to do that. Second I guess > that it stucks from other reasons . I think you can set the parallel port to Generic text only in the BIOS. You also need to set switch S5-1 on the Atlas board, if set the display shows something like "Flash DL" Remember to delete the flash before writing to it, see the script on the Atlas CD. > Best Regards, > Nicu > > Carsten Langgaard wrote: > > > It should be straight forward, just follow the Atlas documentation. > > I don't think you need to do anything with the parallel port, except that you > > need parallel port support on you linux PC, of course. > > > > /Carsten > > > > POPOVICI Nicolae wrote: > > > > > Hello Carlsten, > > > > > > My address is actually octavpo@isratech.ro but I need an answer to my > > > problem. > > > So I have to write the system flash on an ATLAS board. PLease tell me how do I > > > do that. I read the manuals that come with the board and there it says that I > > > have to set the parallel port to "Generic text only". How do I do that on a > > > LINUX machine ? Then I just copy the file that I want to write in system flash > > > to the parallel port , am I correct ? > > > I do not have to convert the file that I want to write in FLASH in a text only > > > format !!!! Am I correct ? > > > > > > Please try to tell me how can I write the system flash with as much details as > > > you can. > > > > > > Regards, > > > Nicu > > > > > > > > > > > > ____________________________________________________________________ > > > Get free email and a permanent address at http://www.netaddress.com/?N=1 > > > > -- > > _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com > > |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 > > | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 > > TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 > > Denmark http://www.mips.com -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Wed Dec 20 03:15:48 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 03:15:29 -0800 Received: from [210.241.238.126] ([210.241.238.126]:46097 "EHLO viditec-netmedia.com.tw") by oss.sgi.com with ESMTP id ; Wed, 20 Dec 2000 03:15:07 -0800 Received: from kjlin ([210.241.238.122]) by viditec-netmedia.com.tw (8.9.3/8.8.7) with SMTP id TAA29446 for ; Wed, 20 Dec 2000 19:22:43 +0800 Message-ID: <053601c06a6c$ee66ca60$056aaac0@kjlin> From: "kjlin" To: Subject: Run the cross-compiled program. Date: Wed, 20 Dec 2000 18:09:25 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0533_01C06AAF.FC7019C0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_0533_01C06AAF.FC7019C0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: quoted-printable Can anyone point out which step i done wrong in the process of = cross-compiling an program with the -static option? I made the cross-compile toolkit by myself. All the source code and patches for cross-compile were downloaded from = the SGI ftp site. The version is as following: cross-binutils =3D version 2.10.90 cross-gcc =3D version 2.96 20000707 cross-usable glibc =3D libc-2.1.90 The cross-compile toolkits building process is ok! I used the cross-compiler to compile a program with the " -static " = option in the host and then ran it on the target. But i got the error message: # ./a.out FATAL: kernel too old Aborted Where i be trapped? My host system is x86 running linux-2.2.14(Redhat 6.2). My target system is an embedded mips board running linux-2.2.14 and = shell is the statically linked ash binary from a lib-2.6.0 = filesystem(kernel version unknown). By the way, i builded the cross-usable glibc-2.1.90 with configure = "--enable-kernel=3D2.2.14". Thanx, KJ from kj.lin@viditec-netmedia.com.tw ------=_NextPart_000_0533_01C06AAF.FC7019C0 Content-Type: text/html; charset="big5" Content-Transfer-Encoding: quoted-printable
Can anyone point out which step i done wrong in the = process of=20 cross-compiling an program with the -static option?
I made the = cross-compile=20 toolkit by myself.
All the source code and patches for cross-compile = were=20 downloaded from the SGI ftp site.
The version is as=20 following:
cross-binutils =3D version 2.10.90
cross-gcc =3D = version 2.96=20 20000707
cross-usable glibc =3D libc-2.1.90
The cross-compile = toolkits=20 building process is ok!
I used the cross-compiler to compile a = program=20 with the " -static " option in the host and then ran it on the = target.
But i=20 got the error message:
# ./a.out
FATAL: kernel too old
Aborted
 
Where i be trapped?
My host system is x86 running = linux-2.2.14(Redhat 6.2).
My target system is an embedded mips board = running=20 linux-2.2.14 and shell is the statically linked ash binary from a = lib-2.6.0=20 filesystem(kernel version unknown).
By the way, i builded the = cross-usable=20 glibc-2.1.90 with configure "--enable-kernel=3D2.2.14".
Thanx,
KJ from kj.lin@viditec-netmedia.co= m.tw
------=_NextPart_000_0533_01C06AAF.FC7019C0-- From owner-linux-mips@oss.sgi.com Wed Dec 20 05:31:11 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 05:30:51 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:34213 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 20 Dec 2000 05:30:33 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA02079; Wed, 20 Dec 2000 14:24:38 +0100 (MET) Date: Wed, 20 Dec 2000 14:24:37 +0100 (MET) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Jun Sun cc: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: MIPS_ATOMIC_SET in sys_sysmips() In-Reply-To: <3A3FAB2B.35F0148E@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 19 Dec 2000, Jun Sun wrote: > > There is no problem with using ll/sc in sysmips() itself for machines > > that support them. > > Sure - but with ll/sc available the user programs don't need to issue > sysmip(MIPS_ATOMIC_SET,...) at the first place ... You may be running a MIPS I binary on a MIPS II+ SMP system and the binary has to run absolutely correctly. Programs affected include ones that use threads or that use locks in shared memory. > > I asked Ralf for a clarification of the sysmips(MIPS_ATOMIC_SET, ...) > > call before I write better code. No response so far. I'm now really > > cosidering implementing the Ultrix atomic_op() syscall -- at least it has > > a well-known defined behaviour. > > Where can I find the definitino of atomic_op()? Or can you tell us a little > more about it? You may search the Net for atomic_op -- you should find a couple of Ultrix man pages. A copy is included below for your convenience. > > The previous code was definitely broken -- depending on the path taken it > > would return either the value fetched from memory or an error code. No > > way to distinguish between them. > > I notice that. I notice glibc is the only "customer" of the MIPS_SET_ATOMIC > call, the bug does not appear to be a big deal because error should not > happen. Of course, it will be nice to fix it. It is at the moment, but I can see other users once we establish the API. PostgreSQL is one of them. It would call _test_and_set() but it implies the latter should work as expected. The _test_and_set() function is documented in the MIPS ABI supplement and the underlying syscall (whichever it is) must provide means for the fuction to behave as expected. Besides, if we want this to be a compatibility call, then we should at least make it behave in a compatible way. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + atomic_op(2) Name atomic_op - perform test and set operation. Syntax #include int atomic_op(op, addr) int op; int *addr; Arguments op This argument is the operation type. If the operation type is ATOMIC_SET, this call specifies the test and set operation on location addr. If the operation type is ATOMIC_CLEAR, this call specifies the clear operation on location addr. addr This is the target address of the operation. Description The atomic_op call provides test and set operation at a user address. For RISC systems, atomic_op is executed as a system call. For VAX sys- tems, a system call is not executed for this library function. Return Values If the atomic_op operation succeeds, then 0 is returned. Otherwise a -1 is returned, and a more specific error code is stored in errno. Diagnostics [EBUSY] The location specified by addr is already set. [EINVAL] The op is not a valid operation type. [EACCES] The address specified in addr is not write accessible. [EALIGN] The addr is not on an integer boundary. From owner-linux-mips@oss.sgi.com Wed Dec 20 07:05:31 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 07:05:11 -0800 Received: from router.isratech.ro ([193.226.114.69]:58891 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 20 Dec 2000 07:05:09 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBKF41p28098; Wed, 20 Dec 2000 17:04:01 +0200 Message-ID: <3A4138BF.871CB6C@isratech.ro> Date: Wed, 20 Dec 2000 17:54:55 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: kjlin , linux-mips@oss.sgi.com Subject: Re: Run the cross-compiled program. References: <053601c06a6c$ee66ca60$056aaac0@kjlin> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am very interested in getting the latest sources for binutils, gcc and glibc working in cross toolchain for mips. PLease tell me from where did you took the gcc that you use . Please give me as muche details as you can. Regards, Nicu kjlin wrote: > Can anyone point out which step i done wrong in the process of > cross-compiling an program with the -static option? > I made the cross-compile toolkit by myself. > All the source code and patches for cross-compile were downloaded from > the SGI ftp site. > The version is as following: > cross-binutils = version 2.10.90 > cross-gcc = version 2.96 20000707 > cross-usable glibc = libc-2.1.90 > The cross-compile toolkits building process is ok! > I used the cross-compiler to compile a program with the " -static " > option in the host and then ran it on the target. > But i got the error message:# ./a.outFATAL: kernel too old > Aborted Where i be trapped? > My host system is x86 running linux-2.2.14(Redhat 6.2). > My target system is an embedded mips board running linux-2.2.14 and > shell is the statically linked ash binary from a lib-2.6.0 > filesystem(kernel version unknown). > By the way, i builded the cross-usable glibc-2.1.90 with configure > "--enable-kernel=2.2.14".Thanx,KJ from kj.lin@viditec-netmedia.com.tw From owner-linux-mips@oss.sgi.com Wed Dec 20 12:40:22 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 12:40:02 -0800 Received: from nwcst291.netaddress.usa.net ([204.68.23.36]:56710 "HELO convert rfc822-to-8bit nwcst291.netaddress.usa.net") by oss.sgi.com with SMTP id ; Wed, 20 Dec 2000 12:39:37 -0800 Received: (qmail 14598 invoked by uid 60001); 20 Dec 2000 20:39:36 -0000 Message-ID: <20001220203936.14597.qmail@nwcst291.netaddress.usa.net> Received: from 204.68.23.36 by nwcst291 for [193.231.6.39] via web-mailer(34FM.0700.4B.01) on Wed Dec 20 20:39:36 GMT 2000 Date: 20 Dec 00 22:39:36 EET From: POPOVICI Nicolae To: carstenl@mips.com Subject: Linux2.4.0-test9 on MIPS! CC: linux-mips@oss.sgi.com X-Mailer: USANET web-mailer (34FM.0700.4B.01) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 8BIT Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello Carsten, I need help again so please forgive me if I am bothering once again. What can you tell me about porting the Linux 2.4-test9 on MIPS( specially on ATLAS ) ? Please forward this question to mips-linux mailing list because I was in imposibility to use my usual address. PLease give me as much details as yopu know and as you can on porting the Linux 2.4.0 test9 on ATLAS. Thank you. Best Regards, Nicu ____________________________________________________________________ Get free email and a permanent address at http://www.netaddress.com/?N=1 From owner-linux-mips@oss.sgi.com Wed Dec 20 18:43:14 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 18:42:53 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:22029 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Wed, 20 Dec 2000 18:42:26 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id SAA20912; Wed, 20 Dec 2000 18:39:38 -0800 Date: Wed, 20 Dec 2000 18:39:38 -0800 From: Keith M Wesolowski To: kjlin Cc: linux-mips@oss.sgi.com Subject: Re: Run the cross-compiled program. Message-ID: <20001220183938.A20077@chem.unr.edu> References: <053601c06a6c$ee66ca60$056aaac0@kjlin> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <053601c06a6c$ee66ca60$056aaac0@kjlin>; from kj.lin@viditec-netmedia.com.tw on Wed, Dec 20, 2000 at 06:09:25PM +0800 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Dec 20, 2000 at 06:09:25PM +0800, kjlin wrote: > Can anyone point out which step i done wrong in the process of > cross-compiling an program with the -static option? I made the > cross-compile toolkit by myself. Be aware of an unrelated problem: statically linked binaries that attempt to access functions in the nss libraries will crash. > FATAL: kernel too old > My target system is an embedded mips board running linux-2.2.14 and One possibility is that you do not have the proc filesystem available when running the program. Certain older libc has issues with detecting version when /proc was not available. Another possibility is that you somehow got hold of the glibc that I built, from the same toolkit. That glibc will not run on kernel < 2.3.99. I guess I don't quite understand why you would want to use kernel 2.2 with glibc 2.2. For embedded purposes, glibc 2.0 will save you a lot of space; if you just want the newest stuff unconditionally, use kernel 2.4. The specific libc you are using is rather dated anyway. While it worked for most purposes it is hardly bug-free. Consider using CVS glibc, or the glibc from Florian's Debian build environment. -- Keith M Wesolowski wesolows@chem.unr.edu From owner-linux-mips@oss.sgi.com Wed Dec 20 23:40:14 2000 Received: by oss.sgi.com id ; Wed, 20 Dec 2000 23:39:54 -0800 Received: from mx.mips.com ([206.31.31.226]:44424 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 20 Dec 2000 23:39:49 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id XAA06312; Wed, 20 Dec 2000 23:39:38 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id XAA20120; Wed, 20 Dec 2000 23:39:35 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id IAA22508; Thu, 21 Dec 2000 08:39:10 +0100 (MET) Message-ID: <3A41B39D.4E5B1AC1@mips.com> Date: Thu, 21 Dec 2000 08:39:09 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: POPOVICI Nicolae CC: linux-mips@oss.sgi.com Subject: Re: Linux2.4.0-test9 on MIPS! References: <20001220203936.14597.qmail@nwcst291.netaddress.usa.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I have send some patches to Ralf, which include support for the Atlas board. I think he still needs to check a few things in, before we got full support for Atlas. It will be linux 2.4.0 test11, though. /Carsten POPOVICI Nicolae wrote: > Hello Carsten, > > I need help again so please forgive me if I am bothering once again. > What can you tell me about porting the Linux 2.4-test9 on MIPS( specially > on ATLAS ) ? Please forward this question to mips-linux mailing list because I > was in imposibility to use my usual address. > PLease give me as much details as yopu know and as you can on porting the > Linux 2.4.0 test9 on ATLAS. > > Thank you. > Best Regards, > Nicu > > ____________________________________________________________________ > Get free email and a permanent address at http://www.netaddress.com/?N=1 -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Dec 21 00:18:43 2000 Received: by oss.sgi.com id ; Thu, 21 Dec 2000 00:18:24 -0800 Received: from router.isratech.ro ([193.226.114.69]:17170 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Thu, 21 Dec 2000 00:17:54 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eBL8HLp04105; Thu, 21 Dec 2000 10:17:22 +0200 Message-ID: <3A422AF2.C9F675FD@isratech.ro> Date: Thu, 21 Dec 2000 11:08:18 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Carsten Langgaard , linux-mips@oss.sgi.com Subject: Re: Linux2.4.0-test9 on MIPS! References: <20001220203936.14597.qmail@nwcst291.netaddress.usa.net> <3A41B39D.4E5B1AC1@mips.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello Carsten, Can you send that patches to me also.PLESE. I need them as soon as possible in order to have a nice Christmas. I will help you in testing the ATLAS support. Is that possible ? Regards, Nicu Carsten Langgaard wrote: > I have send some patches to Ralf, which include support for the Atlas board. > I think he still needs to check a few things in, before we got full support for > Atlas. > It will be linux 2.4.0 test11, though. > > /Carsten > > POPOVICI Nicolae wrote: > > > Hello Carsten, > > > > I need help again so please forgive me if I am bothering once again. > > What can you tell me about porting the Linux 2.4-test9 on MIPS( specially > > on ATLAS ) ? Please forward this question to mips-linux mailing list because I > > was in imposibility to use my usual address. > > PLease give me as much details as yopu know and as you can on porting the > > Linux 2.4.0 test9 on ATLAS. > > > > Thank you. > > Best Regards, > > Nicu > > > > ____________________________________________________________________ > > Get free email and a permanent address at http://www.netaddress.com/?N=1 > > -- > _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com > |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 > | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 > TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 > Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Dec 21 23:54:45 2000 Received: by oss.sgi.com id ; Thu, 21 Dec 2000 23:54:35 -0800 Received: from [210.241.238.126] ([210.241.238.126]:46344 "EHLO viditec-netmedia.com.tw") by oss.sgi.com with ESMTP id ; Thu, 21 Dec 2000 23:54:24 -0800 Received: from kjlin ([210.241.238.122]) by viditec-netmedia.com.tw (8.9.3/8.8.7) with SMTP id QAA02694; Fri, 22 Dec 2000 16:01:23 +0800 Message-ID: <062f01c06be1$d1ca8ce0$056aaac0@kjlin> From: "kjlin" To: "Keith M Wesolowski" Cc: References: <053601c06a6c$ee66ca60$056aaac0@kjlin> <20001220183938.A20077@chem.unr.edu> Subject: Re: Run the cross-compiled program. Date: Fri, 22 Dec 2000 14:38:38 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing ----- Original Message ----- > I guess I don't quite understand why you would want to use kernel 2.2 > with glibc 2.2. For embedded purposes, glibc 2.0 will save you a lot > of space; if you just want the newest stuff unconditionally, use > kernel 2.4. The specific libc you are using is rather dated anyway. > While it worked for most purposes it is hardly bug-free. Consider > using CVS glibc, or the glibc from Florian's Debian build environment. > > -- The original system of my embedded mips board is the kernel 2.2 with the libc-2.0.4. But the libc-2.0.4 seems not to support POSIX 1003.1c, which cause my program to fail. That's the reasion why i want to upgrade the library. In fact, i prefer to upgrade to libc-2.0.6, but i am not sure whether it supports POSIX 1003.1c. On the other hand, i can not find the cross-usable libc-2.0.6 source and patches or binary tarball for my cross-compiler. Any suggestions ? Thanks, KJ From owner-linux-mips@oss.sgi.com Fri Dec 22 02:47:26 2000 Received: by oss.sgi.com id ; Fri, 22 Dec 2000 02:47:07 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:59594 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Fri, 22 Dec 2000 02:46:50 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id LAA25883; Fri, 22 Dec 2000 11:44:33 +0100 (MET) Date: Fri, 22 Dec 2000 11:44:32 +0100 (MET) From: "Maciej W. Rozycki" To: Martin Michlmayr cc: Florian Lohoff , linux-mips@oss.sgi.com Subject: Re: Kernel Oops when booting on DECstation In-Reply-To: <20001219134828.A361@katze.cyrius.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 19 Dec 2000, Martin Michlmayr wrote: > Unable to handle kernel paging request at virtual address 00000004, epc == 8005a16c, ra == 8005a124 > Oops in fault.c:do_page_fault, line 172: > $0 : 00000000 10002000 80720410 00000000 80720410 00000000 81088460 10002000 > $8 : 00000000 00000000 00000000 00000000 00bc8000 fffffff7 ffffffff 8021f180 > $16: 00010f00 8021c000 00000000 80048000 30464354 a0002f88 fffffff4 00010f00 > $24: 00000001 0000000a 80720000 80720f58 80721090 8005a124 > epc : 8005a16c > Status: 10002004 > Cause : 30000008 > Process (pid: 0, stackpage=80720000) > Stack: 80061d94 00000001 000000c0 80061a58 801e0eec 800f82fc 00000000 00000000 > 00000000 80720f7c 80720f7c 00000023 00000000 00000000 00000000 80720f7c > 80720f7c 00000023 00010f00 00010000 00000000 80048000 30464354 a0002f88 > bfc00cbc a000f404 40208a0a 8004e1a8 00000000 00000020 80720fe0 00000000 > 8004b46c 00002617 00010f00 00000000 80721090 00002617 00bc8000 fffffff7 > 00000000 ... > Call Trace: [<80061d94>] [<80061a58>] [<800f82fc>] [<80048000>] [<8004e1a8>] [<8004b46c>] > Code: 24630010 8e2501d4 8e230218 <8ca20004> 00000000 0043102b 10400431 2416fff5 40046000 > > sym2call says: > > Address Function > > 80061d94 tasklet_hi_action > 80061a58 do_softirq > 800f82fc do_IRQ > 80048000 init > 8004e1a8 _sys_clone > 8004b46c stack_done Could you please decode your oops with ksymoops or, better yet, send me the object (*.o) file the oops is happening? I tried to match the code above with my kernel binary but I failed. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Sun Dec 24 03:26:40 2000 Received: by oss.sgi.com id ; Sun, 24 Dec 2000 03:26:20 -0800 Received: from air.lug-owl.de ([62.52.24.190]:17683 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sun, 24 Dec 2000 03:25:51 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 91DA78041; Sun, 24 Dec 2000 12:25:40 +0100 (CET) Date: Sun, 24 Dec 2000 12:25:39 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: External SCSI connector on DECstations Message-ID: <20001224122539.B25473@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="neYutvxvOLaeuPCA" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --neYutvxvOLaeuPCA Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi! I've got some trouble attaching devices to DECstation's external SCSI connector. Is there any additional jumper (or sth like that) on the mobo I need to remove in order to not automatically terminate the bus (inside the DS) before the connector? =2E..or do I do something completely wrong? MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --neYutvxvOLaeuPCA Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjpF3TMACgkQHb1edYOZ4btTCgCfZkPjSyUdbECjNIm9rcNNeZQp W6QAnR/cFsXQgcZvTTAU8yQq+CTwPYyx =LoJD -----END PGP SIGNATURE----- --neYutvxvOLaeuPCA-- From owner-linux-mips@oss.sgi.com Sun Dec 24 03:33:19 2000 Received: by oss.sgi.com id ; Sun, 24 Dec 2000 03:33:09 -0800 Received: from mail.sonytel.be ([193.74.243.200]:5255 "EHLO mail.sonytel.be") by oss.sgi.com with ESMTP id ; Sun, 24 Dec 2000 03:33:00 -0800 Received: from rose.sonytel.be (rose.sonytel.be [193.74.243.35]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id MAA22604; Sun, 24 Dec 2000 12:32:44 +0100 (MET) Date: Sun, 24 Dec 2000 12:32:43 +0100 (MET) From: Geert Uytterhoeven To: Jan-Benedict Glaw cc: linux-mips@oss.sgi.com Subject: Re: External SCSI connector on DECstations In-Reply-To: <20001224122539.B25473@lug-owl.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, 24 Dec 2000, Jan-Benedict Glaw wrote: > I've got some trouble attaching devices to DECstation's external > SCSI connector. Is there any additional jumper (or sth like > that) on the mobo I need to remove in order to not automatically > terminate the bus (inside the DS) before the connector? > > ...or do I do something completely wrong? Is this an high-density 68-pin connector, like used for UW-SCSI? If yes, be careful! Many DECstations use these connectors, but are in fact narrow SCSI! So you need the correct (DEC) cable. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248626 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Sun Dec 24 03:40:59 2000 Received: by oss.sgi.com id ; Sun, 24 Dec 2000 03:40:50 -0800 Received: from air.lug-owl.de ([62.52.24.190]:18451 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sun, 24 Dec 2000 03:40:48 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 7FA458041; Sun, 24 Dec 2000 12:40:41 +0100 (CET) Date: Sun, 24 Dec 2000 12:40:41 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Re: External SCSI connector on DECstations Message-ID: <20001224124040.C25473@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com References: <20001224122539.B25473@lug-owl.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="/e2eDi0V/xtL+Mc8" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: ; from Geert.Uytterhoeven@sonycom.com on Sun, Dec 24, 2000 at 12:32:43PM +0100 X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --/e2eDi0V/xtL+Mc8 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Dec 24, 2000 at 12:32:43PM +0100, Geert Uytterhoeven wrote: > On Sun, 24 Dec 2000, Jan-Benedict Glaw wrote: > > I've got some trouble attaching devices to DECstation's external > > SCSI connector. Is there any additional jumper (or sth like > > that) on the mobo I need to remove in order to not automatically > > terminate the bus (inside the DS) before the connector? > >=20 > > ...or do I do something completely wrong? >=20 > Is this an high-density 68-pin connector, like used for UW-SCSI? > If yes, be careful! Many DECstations use these connectors, but are in fact > narrow SCSI! So you need the correct (DEC) cable. No, it's normal 50pin high density... I've tried with and w/o external termination afterthat hdd, but no success... However, I'll really need that connector because I need to disk-boot two machines as they don't do bootp/tftp (but mop, and the two tested mop servers can't handle these machines;( and constantly plugging/unplugging hdds with those internal flat ribbon cables isn't fun at all... MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --/e2eDi0V/xtL+Mc8 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjpF4LgACgkQHb1edYOZ4bs8tQCfUDUpqxcDoBnNlQA0mx/h0IJK OzMAn19yHbJrMxpcs5vBVWA4OJhVOeP4 =a3cI -----END PGP SIGNATURE----- --/e2eDi0V/xtL+Mc8-- From owner-linux-mips@oss.sgi.com Tue Dec 26 08:10:50 2000 Received: by oss.sgi.com id ; Tue, 26 Dec 2000 08:10:29 -0800 Received: from brutus.conectiva.com.br ([200.250.58.146]:53999 "EHLO dhcp046.distro.conectiva") by oss.sgi.com with ESMTP id ; Tue, 26 Dec 2000 08:10:08 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Tue, 26 Dec 2000 14:02:04 -0200 Date: Tue, 26 Dec 2000 14:02:04 -0200 From: Ralf Baechle To: Joe deBlaquiere Cc: the list , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips call and glibc atomic set Message-ID: <20001226140204.D894@bacchus.dhis.org> References: <3A46F4D8.9060605@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A46F4D8.9060605@redhat.com>; from jadb@redhat.com on Mon, Dec 25, 2000 at 01:18:48AM -0600 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Dec 25, 2000 at 01:18:48AM -0600, Joe deBlaquiere wrote: > I'm working with a vr4181 target and started digging into the atomic > test and set stuff in the kernel and glibc. The first problem I had was > that the glibc code assumes that all mips III targets implement the mips > III ISA (funny assumption, no?) but the vr4181 doesn't include the > miltiprocessor oriented LL/SC operations for atomic test and set. Ok, but since the kernel disables MIPS III you're limited to MIPS II anyway ... > So I started looking at the glibc code (yes, I know this is the kernel > list... I'm getting there I promise) and notice the following operations: > > __asm__ __volatile__ > (".set mips2\n\t" > "/* Inline spinlock test & set */\n\t" > "1:\n\t" > "ll %0,%3\n\t" > ".set push\n\t" > ".set noreorder\n\t" > "bnez %0,2f\n\t" > " li %1,1\n\t" > ".set pop\n\t" > "sc %1,%2\n\t" > "beqz %1,1b\n" > "2:\n\t" > "/* End spinlock test & set */" > : "=&r" (ret), "=&r" (temp), "=m" (*spinlock) > : "m" (*spinlock) > : "memory"); > > The significant code here being the 'll' and 'sc' operations which are > supposed to ensure that the operation is atomic. > > QUESTION 1) Will this _ALWAYS_ work from user land? I realize the > operations are temporally close, but isn't there the possibility that an > interrupt occurs in the meantime? Read the ISA manual; sc will fail if the LL-bit in c0_status is cleared which will be cleared when the interrupt returns using the eret instruction. > Of course none of this code applies to my case anyway, since the vr4181 > doesn't implement these ops. So once I hack^H^H^H^Hadjust glibc to use > the 'mips1' implementation, it uses the sysmips system call. regard : > > _test_and_set (int *p, int v) __THROW > { > return sysmips (MIPS_ATOMIC_SET, (int) p, v, 0); > } > > So then I looked at the kernel and find the code below. The system I'm > working with is expressedly uniprocessor and doesn't have any swap, so > it looks like the initial caveats are met, but it looks to me like there > could be some confusion if the value of *arg1 at entry looks like > -ENOSYS or something like that. Not having swap doesn't mean you're safe. Think of any kind of previously unmapped page. > QUESTION 2) Wouldn't it be better to pass back the initial value of > *arg1 in *arg3 and return zero or negative error code? The semantics of this syscall were previously defined by Risc/OS and later on continued to be used by IRIX. > case MIPS_ATOMIC_SET: { > /* This is broken in case of page faults and SMP ... > Risc/OS faults after maximum 20 tries with EAGAIN. */ > unsigned int tmp; > > p = (int *) arg1; > errno = verify_area(VERIFY_WRITE, p, sizeof(*p)); > if (errno) > return errno; > errno = 0; > save_and_cli(flags); > errno |= __get_user(tmp, p); > errno |= __put_user(arg2, p); > restore_flags(flags); > > if (errno) > return tmp; > > return tmp; /* This is broken ... */ > } > > QUESTION 3) I notice that the code for this particular case of sysmips > has changed recently. The old code looked more like the 'll/sc' version > of glibc above. I would think that the 'll/sc' code would be better on > SMP systems. Don't think about SMP without ll/sc. There's algorithems available for that but their complexity leaves them a unpractical, theoretical construct. > Is there a good reason why this reverted? Above code will break if the old content of memory has bit 31 set or you take pagefaults. The latter problem is a problem even on UP - think multi- threading. Finally, post such things to one of the MIPS-related mailing lists. If you're unlucky nobody of the MIPS'ers might see your posting on l-k. Ralf From owner-linux-mips@oss.sgi.com Tue Dec 26 08:52:50 2000 Received: by oss.sgi.com id ; Tue, 26 Dec 2000 08:52:30 -0800 Received: from blackdog.wirespeed.com ([208.170.106.25]:22030 "EHLO blackdog.wirespeed.com") by oss.sgi.com with ESMTP id ; Tue, 26 Dec 2000 08:52:09 -0800 Received: from redhat.com (IDENT:joe@dhcp-4.wirespeed.com [172.16.17.4]) by blackdog.wirespeed.com (8.9.3/8.9.3) with ESMTP id KAA20412; Tue, 26 Dec 2000 10:45:03 -0600 Message-ID: <3A48CC1D.9000204@redhat.com> Date: Tue, 26 Dec 2000 10:49:33 -0600 From: Joe deBlaquiere Organization: Red Hat, Inc. User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.16-22 i686; en-US; m18) Gecko/20001107 Netscape6/6.0 X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: the list , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips call and glibc atomic set References: <3A46F4D8.9060605@redhat.com> <20001226140204.D894@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf, firstly, thank you for the answers :) Ralf Baechle wrote: > > Ok, but since the kernel disables MIPS III you're limited to MIPS II anyway ... > This makes sense... > > > Read the ISA manual; sc will fail if the LL-bit in c0_status is cleared > which will be cleared when the interrupt returns using the eret instruction. > I tried to find a MIPSIII manual from mips.com but all I could find was mips32 and mips64 (which are not the same as MIPSII/MIPSIII/MIPSIV). > > > Not having swap doesn't mean you're safe. Think of any kind of previously > unmapped page. > Is there a reason why it doesn't just force that page to be mapped first? > >> QUESTION 2) Wouldn't it be better to pass back the initial value of >> *arg1 in *arg3 and return zero or negative error code? > > > The semantics of this syscall were previously defined by Risc/OS and later > on continued to be used by IRIX. > > >> case MIPS_ATOMIC_SET: { >> /* This is broken in case of page faults and SMP ... >> Risc/OS faults after maximum 20 tries with EAGAIN. */ >> unsigned int tmp; >> >> p = (int *) arg1; >> errno = verify_area(VERIFY_WRITE, p, sizeof(*p)); >> if (errno) >> return errno; >> errno = 0; >> save_and_cli(flags); >> errno |= __get_user(tmp, p); >> errno |= __put_user(arg2, p); >> restore_flags(flags); >> >> if (errno) >> return tmp; >> >> return tmp; /* This is broken ... */ >> } >> >> QUESTION 3) I notice that the code for this particular case of sysmips >> has changed recently. The old code looked more like the 'll/sc' version >> of glibc above. I would think that the 'll/sc' code would be better on >> SMP systems. > > > Don't think about SMP without ll/sc. There's algorithems available for > that but their complexity leaves them a unpractical, theoretical construct. > > >> Is there a good reason why this reverted? > Looking at 2.4.0-test5 I see the ll/sc code, but -test12 doesn't use it. I was just curious at why it was taken out. > > Above code will break if the old content of memory has bit 31 set or you take > pagefaults. The latter problem is a problem even on UP - think multi- > threading. > > Finally, post such things to one of the MIPS-related mailing lists. If > you're unlucky nobody of the MIPS'ers might see your posting on l-k. > > Ralf -- Joe deBlaquiere Red Hat, Inc. 307 Wynn Drive Huntsville AL, 35805 voice : (256)-704-9200 fax : (256)-837-3839 From owner-linux-mips@oss.sgi.com Tue Dec 26 12:57:33 2000 Received: by oss.sgi.com id ; Tue, 26 Dec 2000 12:57:14 -0800 Received: from [194.213.32.137] ([194.213.32.137]:23813 "EHLO bug.ucw.cz") by oss.sgi.com with ESMTP id ; Tue, 26 Dec 2000 12:56:51 -0800 Received: (from pavel@localhost) by bug.ucw.cz (8.8.8/8.8.5) id VAA00698; Tue, 26 Dec 2000 21:53:17 +0100 Message-ID: <20001226215317.B628@bug.ucw.cz> Date: Tue, 26 Dec 2000 21:53:17 +0100 From: Pavel Machek To: Joe deBlaquiere , Ralf Baechle Cc: the list , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips call and glibc atomic set References: <3A46F4D8.9060605@redhat.com> <20001226140204.D894@bacchus.dhis.org> <3A48CC1D.9000204@redhat.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.93i In-Reply-To: <3A48CC1D.9000204@redhat.com>; from Joe deBlaquiere on Tue, Dec 26, 2000 at 10:49:33AM -0600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi! > > Not having swap doesn't mean you're safe. Think of any kind of previously > > unmapped page. > > > > Is there a reason why it doesn't just force that page to be mapped > first? You can map it in... But background daemon can map it out in the meantime :-). You'd have to map in and pagelock. Pavel -- I'm pavel@ucw.cz. "In my country we have almost anarchy and I don't care." Panos Katsaloulis describing me w.r.t. patents at discuss@linmodems.org From owner-linux-mips@oss.sgi.com Thu Dec 28 04:10:51 2000 Received: by oss.sgi.com id ; Thu, 28 Dec 2000 04:10:41 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:37872 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 28 Dec 2000 04:10:20 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id NAA22306; Thu, 28 Dec 2000 13:07:01 +0100 (MET) Date: Thu, 28 Dec 2000 13:06:59 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Joe deBlaquiere , the list , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips call and glibc atomic set In-Reply-To: <20001226140204.D894@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 26 Dec 2000, Ralf Baechle wrote: > The semantics of this syscall were previously defined by Risc/OS and later > on continued to be used by IRIX. Ralf, could you please provide me a copy of a man page for the call? I don't have access to either of the systems and a search of the Net returned nothing. > Don't think about SMP without ll/sc. There's algorithems available for > that but their complexity leaves them a unpractical, theoretical construct. For SMP there is a simple kernel solution available. It suitable for a syscall or a ll/sc emulation. There is no easy userland-only solution AFAIK. > Above code will break if the old content of memory has bit 31 set or you take > pagefaults. The latter problem is a problem even on UP - think multi- > threading. If the code is written carefully you don't ever get a pagefault that would break consistency. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Dec 28 04:29:52 2000 Received: by oss.sgi.com id ; Thu, 28 Dec 2000 04:29:42 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:47600 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 28 Dec 2000 04:29:19 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id NAA22644; Thu, 28 Dec 2000 13:25:57 +0100 (MET) Date: Thu, 28 Dec 2000 13:25:56 +0100 (MET) From: "Maciej W. Rozycki" To: Joe deBlaquiere cc: Ralf Baechle , the list , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips call and glibc atomic set In-Reply-To: <3A48CC1D.9000204@redhat.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 26 Dec 2000, Joe deBlaquiere wrote: > > Read the ISA manual; sc will fail if the LL-bit in c0_status is cleared > > which will be cleared when the interrupt returns using the eret instruction. > > I tried to find a MIPSIII manual from mips.com but all I could find was > mips32 and mips64 (which are not the same as MIPSII/MIPSIII/MIPSIV). Get "IDT MIPS Microprocessor Software Reference Manual" from http://decstation.unix-ag.org/docs/ic_docs/3715.pdf (the original is no longer available from IDT servers). -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Sun Dec 31 03:43:52 2000 Received: by oss.sgi.com id ; Sun, 31 Dec 2000 03:43:42 -0800 Received: from mail.ivm.net ([62.204.1.4]:10608 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Sun, 31 Dec 2000 03:43:21 -0800 Received: from franz.no.dom (port203.duesseldorf.ivm.de [195.247.65.203]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id MAA30831; Sun, 31 Dec 2000 12:43:05 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 Date: Sun, 31 Dec 2000 12:41:11 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: ralf@uni-koblenz.de, linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: SGI/ARCS related fixes Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, wanting to bring my O2 patches up to date I stumbled over some minor hickups. I don't have the appropriate hardware to test, ok to commit? -- Regards, Harald diff -ruN /nfs/cvs/linux-2.3/linux/arch/mips/arc/memory.c linux/arch/mips/arc/memory.c --- /nfs/cvs/linux-2.3/linux/arch/mips/arc/memory.c Mon Dec 11 18:07:34 2000 +++ linux/arch/mips/arc/memory.c Sat Dec 30 21:49:32 2000 @@ -124,7 +124,7 @@ size = p->pages << PAGE_SHIFT; type = prom_memtype_classify(p->type); - add_memory_region(base, pages, type); + add_memory_region(base, size, type); } } @@ -143,12 +143,13 @@ addr = boot_mem_map.map[i].addr; while (addr < boot_mem_map.map[i].addr + boot_mem_map.map[i].size) { - ClearPageReserved(virt_to_page(__va(addr))); - set_page_count(virt_to_page(__va(addr)), 1); - free_page(__va(addr)); + ClearPageReserved(virt_to_page(addr)); + set_page_count(virt_to_page(addr), 1); + free_page(addr); addr += PAGE_SIZE; freed += PAGE_SIZE; } } printk("Freeing prom memory: %ldkb freed\n", freed >> 10); } + diff -ruN /nfs/cvs/linux-2.3/linux/drivers/char/misc.c linux/drivers/char/misc.c --- /nfs/cvs/linux-2.3/linux/drivers/char/misc.c Fri Nov 24 11:17:05 2000 +++ linux/drivers/char/misc.c Sat Dec 30 21:42:45 2000 @@ -283,9 +283,6 @@ #ifdef CONFIG_SGI_NEWPORT_GFX gfx_register (); #endif -#ifdef CONFIG_SGI - streamable_init (); -#endif #ifdef CONFIG_TOSHIBA tosh_init(); #endif @@ -296,3 +293,4 @@ } return 0; } + diff -ruN /nfs/cvs/linux-2.3/linux/include/asm-mips/sgialib.h linux/include/asm-mips/sgialib.h --- /nfs/cvs/linux-2.3/linux/include/asm-mips/sgialib.h Mon Dec 11 18:08:10 2000 +++ linux/include/asm-mips/sgialib.h Sat Dec 30 21:40:40 2000 @@ -20,7 +20,7 @@ * Init the PROM library and it's internal data structures. Called * at boot time from head.S before start_kernel is invoked. */ -extern int prom_init(int argc, char **argv, char **envp, int *prom_vec); +extern void prom_init(int argc, char **argv, char **envp, int *prom_vec); /* Simple char-by-char console I/O. */ extern void prom_putchar(char c); @@ -104,3 +104,4 @@ extern void prom_cacheflush(void); #endif /* _ASM_SGIALIB_H */ + From owner-linux-mips@oss.sgi.com Sun Dec 31 21:31:37 2000 Received: by oss.sgi.com id ; Sun, 31 Dec 2000 21:31:27 -0800 Received: from cvsftp.cotw.com ([208.242.241.39]:4617 "EHLO cvsftp.cotw.com") by oss.sgi.com with ESMTP id ; Sun, 31 Dec 2000 21:31:10 -0800 Received: from cotw.com (dsl19.cedar-rapids.net [208.242.241.211]) by cvsftp.cotw.com (8.9.3/8.9.3) with ESMTP id XAA28763 for ; Sun, 31 Dec 2000 23:26:36 -0600 Message-ID: <3A5018A0.6B43960B@cotw.com> Date: Sun, 31 Dec 2000 23:41:52 -0600 From: "Steven J. Hill" X-Mailer: Mozilla 4.73 [en] (X11; I; Linux 2.4.0-test11 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Simple problem with second stage MIPS GCC compiler... References: <3A2FB3CB.3566F805@mips.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Well, I almost have a complete toolchain. I succesfully got binutils, first stage GCC-2.95.2 and GLIBC-2.2 installed just fine. I am having problems with rebuilding GCC. Below is the configuration and make directives that I am currently using along with the output. I have verified that the header files are in /usr/local/mips/mipsel-linux-include. Any help or thoughts are need and appreciated. Yes, I read the mailing list archives. TIA. -Steve ************************************************************* AR=mipsel-linux-ar RANLIB=mipsel-linux-ranlib ../gcc-2.95.2/configure --prefix=/usr/local/mips --target=mipsel-linux i686-pc-linux-gnu --enable-shared --enable-threads --enable-languages=c make LANGUAGES=c ALL_TARGET_MODULES= CONFIGURE_TARGET_MODULES= INSTALL_TARGET_MODULES= SUBDIRS="libiberty gcc" ************************************************************* make[2]: Leaving directory `/data/mips-stuff/build-gcc2/gcc/intl' rm -f tmplibgcc2.a for name in _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi _fixtfdi _fixunstfdi _floatditf __gcc_bcmp _varargs __dummy _eprintf _bb _shtab _clear_cache _trampoline __main _exit _ctors _pure; \ do \ echo ${name}; \ /data/mips-stuff/build-gcc2/gcc/xgcc -B/data/mips-stuff/build-gcc2/gcc/ -B/usr/local/mips/mipsel-linux/bin/ -I/usr/local/mips/mipsel-linux/include -O2 -DCROSS_COMPILE -DIN_GCC -g -O2 -I./include -fPIC -g1 -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED -I. -I../../gcc-2.95.2/gcc -I../../gcc-2.95.2/gcc/config -I../../gcc-2.95.2/gcc/../include -c -DL${name} \ ../../gcc-2.95.2/gcc/libgcc2.c -o ${name}.o; \ if [ $? -eq 0 ] ; then true; else exit 1; fi; \ mipsel-linux-ar rc tmplibgcc2.a ${name}.o; \ rm -f ${name}.o; \ done _muldi3 ../../gcc-2.95.2/gcc/libgcc2.c:41: stdlib.h: No such file or directory ../../gcc-2.95.2/gcc/libgcc2.c:42: unistd.h: No such file or directory make[1]: *** [libgcc2.a] Error 1 make[1]: Leaving directory `/data/mips-stuff/build-gcc2/gcc' make: *** [all-gcc] Error 2 -- Steven J. Hill - Embedded SW Engineer Public Key: 'finger sjhill@mail.cotw.com' FPR1: E124 6E1C AF8E 7802 A815 FPR2: 7D72 829C 3386 4C4A E17D .