From owner-linux-mips@oss.sgi.com Wed Nov 1 00:24:07 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 00:23:58 -0800 Received: from mx.mips.com ([206.31.31.226]:32253 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 00:23:49 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id AAA18633; Wed, 1 Nov 2000 00:23:27 -0800 (PST) Received: from Ulysses (par-qbu-gpb-vty6.as.wcom.net [195.232.111.6]) by newman.mips.com (8.9.3/8.9.0) with SMTP id AAA11623; Wed, 1 Nov 2000 00:23:33 -0800 (PST) Message-ID: <001501c043dd$7ed69780$066fe8c3@Ulysses> From: "Kevin D. Kissell" To: "Brady Brown" , "Nicu Popovici" Cc: References: <39FF1A83.387D0E1F@isratech.ro> <39FF2AEB.3137F75E@ti.com> Subject: Re: MIPS ftp problem! Date: Wed, 1 Nov 2000 09:26:46 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > I have a problem with the mips machine. I have an Atlas board and when I > > do ftp on the mips machine from a intel one and I try to transfer files > > ( it works very very slow 0,0234 bytes/s). The same is happening when I > > try to make ftp from the mips machine on a intel box ( all running Linux > > ). > > > > Thanks, > > Nicu > > Is this using the Atlas on-board NIC? We found some pretty bad performance > with the on-board NIC and went to the very cheap RTL8139 PCI card from > OvisLink (used the 8139too.o driver). Performance there is pretty good. There seems to be a problem with the on-board NIC on the Philips multi-I/O part misbehaving under load. It seems to be OK for TFTP downloading and telnet sessions, but loses packets/interrupts under FTP or NFS. So I heartily second Brady's recommendation of using an add-in PCI NIC. At MIPS, we use AMD PCnet cards, for which there is a MIPS cache-and-endianness-clean driver in the kernel sources on the MIPS FTP site (and I think built into the kernel binary there as well). Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Nov 1 01:10:08 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 01:09:58 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:9229 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Wed, 1 Nov 2000 01:09:36 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id BDCA8900; Wed, 1 Nov 2000 10:09:33 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 6C2D28FE1; Wed, 1 Nov 2000 10:09:28 +0100 (CET) Date: Wed, 1 Nov 2000 10:09:28 +0100 From: Florian Lohoff To: Ralf Baechle Cc: Jun Sun , linux-mips@oss.sgi.com Subject: Re: userspace spinlocks Message-ID: <20001101100928.D3539@paradigm.rfc822.org> References: <20001030151736.C2687@paradigm.rfc822.org> <39FDB50A.4919D84E@mvista.com> <20001031211431.C28909@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <20001031211431.C28909@bacchus.dhis.org>; from ralf@oss.sgi.com on Tue, Oct 31, 2000 at 09:14:31PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Oct 31, 2000 at 09:14:31PM +0100, Ralf Baechle wrote: > But what is the better alternative? Emulating ll/sc is a generic facility. > Aside of making that more efficient the only idea I have is putting entire > atomic operations into the kernel such that the standard case should result > in at most one exception to be handled in the kernel. Its just that i fell over db-2.7.7 which told me on configure that it cant find "spinlocks" for this architecture - I had a closer look now and it seems they have asm files for each cpu type on how to implement the atomic "test and set" logic. But nothing for mips. There is a long README stating that there is no real portable way on how to do locking and if no architecture atomic "test and set" logic would be available they would use some complicated fnctl semantics. > Btw, could somebody put a counter into the ll/sc emulator and test how > often it gets called on a R3000 machine? I hope never Sir arch/mips/kernel/traps.c 466 /* 467 * TODO: compute physical address from vaddr 468 */ 469 panic("ll: emulation not yet finished!"); 470 Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Wed Nov 1 05:37:00 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 05:36:50 -0800 Received: from u-199.karlsruhe.ipdial.viaginterkom.de ([62.180.18.199]:39183 "EHLO u-199.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 05:36:35 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 1 Nov 2000 14:36:11 +0100 Date: Wed, 1 Nov 2000 14:36:11 +0100 From: Ralf Baechle To: Mike Klar Cc: Jun Sun , linux-mips@oss.sgi.com Subject: Re: userspace spinlocks Message-ID: <20001101143611.B7375@bacchus.dhis.org> References: <39FF414D.6B0A553C@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from mfklar@ponymail.com on Tue, Oct 31, 2000 at 10:50:39PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Oct 31, 2000 at 10:50:39PM -0800, Mike Klar wrote: > > BTW, I didn't know the kernel already has ll/sc emulation. That seems > > to be necessary, even just for the binary compability sake. > > It's not complete in the Linux-MIPS tree, it is at least more so in the > Linux VR tree, but still only supports locking between user contexts. Patch > is below, sorry if it doesn't apply cleanly, there were a few bits that I > cut out that weren't pertinent to LL/SC. > > The bits that have to do with ll_task in the below patch look wrong, though, > and I only just noticed when preparing this patch that it had gotten added. > I'm not sure what the motivation for adding it was, maybe clearing ll_bit > only on context switches was not sufficient to cover all cases (like thread > creation, maybe?), but I thought I had looked into that already. Ok, I'll take this and try to hack it into shape. I especially don't like putting anything into the scheduler - another 5 ns for a 200MHz box per cotext switch go down the drain. For sanity reasons I also think we don't want to support SMP for the ll/sc emulation. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 1 06:02:30 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 06:02:21 -0800 Received: from u-199.karlsruhe.ipdial.viaginterkom.de ([62.180.18.199]:39951 "EHLO u-199.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 06:02:12 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 1 Nov 2000 15:02:04 +0100 Date: Wed, 1 Nov 2000 15:02:03 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com, netdev@oss.sgi.com, Trevor Hurst , Quentin Arce Subject: ADMIN: SPAM Message-ID: <20001101150203.C7375@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I take this new spam to a oss mailing list as the reason to explain the anti-spam measures I've taken on oss: - oss uses ORBS and MAPS to decide about acceptable email. - in addition I put the ISP and relaying sites involved in spam sent via oss into a manually maintained blacklist. - I try to manually clean some of the list archives of spam. Given the growing size of the various blacklists I'd like legitimate senders of email to oss to complain to me (use ralf@uni-koblenz.de or ralf@gnu.org) and we'll find a solution. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 1 08:40:01 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 08:39:41 -0800 Received: from short.adgrafix.com ([63.79.128.2]:3479 "EHLO short.adgrafix.com") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 08:39:26 -0800 Received: from ppan2 (c534317-a.stcla1.sfba.home.com [24.20.134.153]) by short.adgrafix.com (8.9.3/8.9.3) with SMTP id LAA23259; Wed, 1 Nov 2000 11:33:14 -0500 (EST) From: "Mike Klar" To: "Ralf Baechle" Cc: Subject: RE: userspace spinlocks Date: Wed, 1 Nov 2000 08:40:30 -0800 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 In-Reply-To: <20001101143611.B7375@bacchus.dhis.org> Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > Ok, I'll take this and try to hack it into shape. I especially don't > like putting anything into the scheduler - another 5 ns for a 200MHz box > per cotext switch go down the drain. I agree that's pretty nasty, but I don't see any other way to break the link on context switches that doesn't also add the same overhead (if not more). The worst part of it is the extra store per context switch happens even if you don't ever use ll/sc. You could probably implement locking primitives without it, but then you're getting away from actually emulating ll and sc. I guess that's not a big deal, since we're already not emulating them 100%, but the further you get from the actual functionality of the instructions, the more likely it is to break some user space code when someone decides to be "clever" with ll/sc by using them per the hardware ll/sc specification. Then again, I'm just ranting here, since the clear-it-in-the-resume-function approach apparently wasn't doing what it should have 100% anyway. > For sanity reasons I also think we > don't want to support SMP for the ll/sc emulation. I agree. It's not impossible to do, but very much non-trivial, for something that will probably never be used anyway. The embedded R4K CPUs that I've seen without ll/sc give lack of SMP support as the reason for not implementing ll/sc. Sigh... as if uniprocessor systems never need locking primitives.... Mike K. From owner-linux-mips@oss.sgi.com Wed Nov 1 09:30:32 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 09:30:12 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:34314 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 1 Nov 2000 09:29:46 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id CED697CF1; Wed, 1 Nov 2000 17:29:45 +0000 (GMT) Date: Wed, 1 Nov 2000 17:29:45 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: GCC Compile Failed Message-ID: <20001101172945.A27594@woody.ichilton.co.uk> Reply-To: ian@ichilton.co.uk Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.9i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am trying to compile GCC 001019 using egcs 1.0.3a. Compiling natively on an I2 I get the following: /usr/bin/ld:libgcc.map:1: parse error in VERSION script collect2: ld returned 1 exit status make[3]: *** [libgcc_s.so] Error 1 make[3]: Leaving directory `/mnt/hd2/lfstmp/gcc-001019/gcc-build/gcc' make[2]: *** [libgcc.a] Error 2 make[2]: Leaving directory `/mnt/hd2/lfstmp/gcc-001019/gcc-build/gcc' make[1]: *** [stage_a] Error 2 make[1]: Leaving directory `/mnt/hd2/lfstmp/gcc-001019/gcc-build/gcc' make: *** [bootstrap] Error 2 Any ideas? Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 1 10:58:52 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 10:58:32 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:6895 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 10:58:09 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eA1IuH330315; Wed, 1 Nov 2000 10:56:18 -0800 Message-ID: <3A0067C5.BA9E3174@mvista.com> Date: Wed, 01 Nov 2000 10:58:13 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: "Setting flush to zero for ..." - what is the warning? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I ran some stress tests and start to get this warning. It appears to be generated in do_fpe() routine. See below. I wonder why this is happening. Can someone explain what is going on? Thanks. Jun void do_fpe(struct pt_regs *regs, unsigned long fcr31) { .... if (fcr31 & 0x20000) { /* Retry instruction with flush to zero ... */ if (!(fcr31 & (1<<24))) { printk("Setting flush to zero for %s.\n", current->comm); fcr31 &= ~0x20000; fcr31 |= (1<<24); __asm__ __volatile__( "ctc1\t%0,$31" : /* No outputs */ : "r" (fcr31)); return; } From owner-linux-mips@oss.sgi.com Wed Nov 1 14:32:03 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 14:31:43 -0800 Received: from bender.bawue.de ([193.197.13.1]:10769 "HELO bender.bawue.de") by oss.sgi.com with SMTP id ; Wed, 1 Nov 2000 14:31:37 -0800 Received: from void.s.bawue.de (virtual10.lb.bawue.de [193.197.8.138]) by bender.bawue.de (Postfix) with ESMTP id BDAF3822; Wed, 1 Nov 2000 23:31:33 +0100 (CET) Received: from florian by void.s.bawue.de with local (Exim 3.16 #1 (Debian)) id 13r7L5-0007aP-00; Thu, 02 Nov 2000 00:30:39 +0100 Date: Thu, 2 Nov 2000 00:30:39 +0100 To: "Linux MIPS fnet.fr" Cc: linux-mips@oss.sgi.com Subject: Re: Too much spam Message-ID: <20001102003039.A28516@void.s.bawue.de> Mail-Followup-To: Florian Laws , "Linux MIPS fnet.fr" , linux-mips@oss.sgi.com References: <200011011722.SAA01464@netsurf.de> <20001101222227.F14161@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001101222227.F14161@bacchus.dhis.org>; from ralf@uni-koblenz.de on Wed, Nov 01, 2000 at 10:22:27PM +0100 From: Florian Laws Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 01, 2000 at 10:22:27PM +0100, Ralf Baechle wrote: > On Wed, Nov 01, 2000 at 06:22:34PM +0100, Ulrich Teichert wrote: > > > >I'm getting more spam over this list than actual posts. > > >Is anyone able to do anything against that ? > > > > Last time I wrote the same, I got some ACKs and nothing changed. > > Simply because non of the subscribers has the power to change things. > All I can do is (un)subscribe people. Wouldn't it be a good idea to change the information for the Linux/MIPS project on http://www.linux.org/projects/ports.html to the new web sites and the mailing list on oss? I think especially people looking for a Linux on MIPS project for the first time come across that information and subscribe to the fnet list first, so changing that data would be a first step for a possible shutdown of the fnet list at some time in the future. I ask the linux.org site maintainers if they could change the information, if desired. But I am not sure which web site to use as the primary site of the Linux/MIPS project. Comments? Florian From owner-linux-mips@oss.sgi.com Wed Nov 1 14:43:33 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 14:43:23 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:44810 "HELO convert rfc822-to-8bit woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 1 Nov 2000 14:43:06 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 5785A7CD4; Wed, 1 Nov 2000 22:43:04 +0000 (GMT) Date: Wed, 1 Nov 2000 22:43:04 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Re: GCC Compile Failed Message-ID: <20001101224303.A28369@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: 8BIT User-Agent: Mutt/1.3.9i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, After this problem with GCC, I have compiled the kernel, binutils, batch etc...but now have had problems with glibc. It has been compiling glibc for about 2 hours (I2, 200Mhz, 96Mb) so must have been nearly finished, and I get: gcc -nostdlib -nostartfiles -o /mnt/hd2/lfstmp/glibc-001027/glibc-build/iconv/iconv_prog -Wl,-dynamic-linker=/lib/ld.so.1 /mnt/hd2/lfstmp/glibc-001027/glibc-build/csu/crt1.o /mnt/hd2/lfstmp/glibc-001027/glibc-build/csu/crti.o `gcc --print-file-name=crtbegin.o` /mnt/hd2/lfstmp/glibc-001027/glibc-build/iconv/iconv_prog.o -Wl,-rpath-link=/mnt/hd2/lfstmp/glibc-001027/glibc-build:/mnt/hd2/lfstmp/glibc-001027/glibc-build/math:/mnt/hd2/lfstmp/glibc-001027/glibc-build/elf:/mnt/hd2/lfstmp/glibc-001027/glibc-build/dlfcn:/mnt/hd2/lfstmp/glibc-001027/glibc-build/nss:/mnt/hd2/lfstmp/glibc-001027/glibc-build/nis:/mnt/hd2/lfstmp/glibc-001027/glibc-build/rt:/mnt/hd2/lfstmp/glibc-001027/glibc-build/resolv:/mnt/hd2/lfstmp/glibc-001027/glibc-build/crypt:/mnt/hd2/lfstmp/glibc-001027/glibc-build/linuxthreads /mnt/hd2/lfstmp/glibc-001027/glibc-build/libc.so.6 /mnt/hd2/lfstmp/glibc-001027/glibc-build/libc_nonshared.a -lgcc `gcc --print-file-name=crtend.o` /mnt/hd2/lfstmp/glibc-001027/glibc-build/csu/crtn.o /mnt/hd2/lfstmp/glibc-001027/glibc-build/libc.so.6: undefined reference to `__pthread_initialize_minimal' collect2: ld returned 1 exit status make[2]: *** [/mnt/hd2/lfstmp/glibc-001027/glibc-build/iconv/iconv_prog] Error 1 make[2]: Leaving directory `/mnt/hd2/lfstmp/glibc-001027/iconv' make[1]: *** [iconv/others] Error 2 make[1]: Leaving directory `/mnt/hd2/lfstmp/glibc-001027' make: *** [all] Error 2 Any ideas? Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 1 14:45:43 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 14:45:33 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:45578 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 1 Nov 2000 14:45:20 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 1E15D7CD4; Wed, 1 Nov 2000 22:45:19 +0000 (GMT) Date: Wed, 1 Nov 2000 22:45:19 +0000 From: Ian Chilton To: Florian Laws Cc: linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: Too much spam Message-ID: <20001101224518.B28369@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.9i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > I ask the linux.org site maintainers if they could change the information, > if desired. But I am not sure which web site to use as the primary site > of the Linux/MIPS project. The official site is at oss.sgi.com, but the official web site for #mipslinux (on irc.openprojects.net) is: http://www.linux-mips.org Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 1 16:27:03 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 16:26:54 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:35594 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 16:26:42 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id QAA17850; Wed, 1 Nov 2000 16:25:56 -0800 Date: Wed, 1 Nov 2000 16:25:56 -0800 From: Keith M Wesolowski To: Ian Chilton Cc: linux-mips@oss.sgi.com Subject: Re: GCC Compile Failed Message-ID: <20001101162556.C17186@chem.unr.edu> References: <20001101224303.A28369@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20001101224303.A28369@woody.ichilton.co.uk>; from mailinglist@ichilton.co.uk on Wed, Nov 01, 2000 at 10:43:04PM +0000 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 01, 2000 at 10:43:04PM +0000, Ian Chilton wrote: > /mnt/hd2/lfstmp/glibc-001027/glibc-build/libc.so.6: undefined reference to `__pthread_initialize_minimal' > collect2: ld returned 1 exit status > make[2]: *** [/mnt/hd2/lfstmp/glibc-001027/glibc-build/iconv/iconv_prog] Error 1 Asked and answered. That archaic compiler cannot be used to build glibc 2.2 because it doesn't deal with weak symbol references properly. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Wed Nov 1 19:08:18 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 19:08:08 -0800 Received: from u-1.karlsruhe.ipdial.viaginterkom.de ([62.180.20.1]:24336 "EHLO u-1.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 19:07:41 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 2 Nov 2000 04:06:58 +0100 Date: Thu, 2 Nov 2000 04:06:58 +0100 From: Ralf Baechle To: Jun Sun Cc: linux-mips@oss.sgi.com Subject: Re: "Setting flush to zero for ..." - what is the warning? Message-ID: <20001102040657.A17786@bacchus.dhis.org> References: <3A0067C5.BA9E3174@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A0067C5.BA9E3174@mvista.com>; from jsun@mvista.com on Wed, Nov 01, 2000 at 10:58:13AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 01, 2000 at 10:58:13AM -0800, Jun Sun wrote: > I ran some stress tests and start to get this warning. It appears to be > generated in do_fpe() routine. See below. I wonder why this is > happening. Can someone explain what is going on? Thanks. It tells you the over-the-thumb-fp-mode has been activated ;-) Somebody at MIPS is working on merging the necessary fp support software into the kernel, so this problem should be solved soon. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 1 20:32:08 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 20:31:47 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:23546 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 20:31:21 -0800 Received: from mvista.com (IDENT:ppopov@zeus.mvista.com [10.0.0.112]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eA24TV329771 for ; Wed, 1 Nov 2000 20:29:31 -0800 Message-ID: <3A00EEDF.7C5E6BD5@mvista.com> Date: Wed, 01 Nov 2000 20:34:39 -0800 From: Pete Popov Organization: Monta Vista Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: rm7000/orion board Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing There's some R7000 support, apparently added for an "Orion" board. Has any one had any experience with this board, or with linux on the R7000 in general? From owner-linux-mips@oss.sgi.com Wed Nov 1 23:04:59 2000 Received: by oss.sgi.com id ; Wed, 1 Nov 2000 23:04:39 -0800 Received: from router.isratech.ro ([193.226.114.69]:57102 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 1 Nov 2000 23:04:11 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA273oA20841 for ; Thu, 2 Nov 2000 09:03:51 +0200 Message-ID: <3A018098.ECB9E20C@isratech.ro> Date: Thu, 02 Nov 2000 09:56:24 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Soon I will give up on MIPS kernel! Content-Type: multipart/mixed; boundary="------------A15BF52BE68D9C32267A9CB0" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------A15BF52BE68D9C32267A9CB0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, As you know by now I don't succeeded to crosscompile a mips linux kernel. I was at oss.sgi.com repository and I took the linux_2_2 tag but when I try to compile I have this kind of errors. make CROSS_COMPILE=mips-linux- cc -O2 -o scripts/split-include scripts/split-include.c In file included from /usr/include/errno.h:36, from scripts/split-include.c:26: /usr/include/bits/errno.h:32: warning: `ECANCELED' redefined /usr/include/asm/errno.h:139: warning: this is the location of the previous d efinition scripts/split-include include/linux/autoconf.h include/config mips-linux-gcc -D__KERNEL__ -I/usr/src/linux_2_2_CVS/include -Wall -Wstrict-p rototypes -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -mcpu=r3000 - mips1 -pipe -c -o init/main.o init/main.c /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_add': In file included from /usr/src/linux_2_2_CVS/include/linux/fs.h:22, from /usr/src/linux_2_2_CVS/include/linux/mm.h:4, from /usr/src/linux_2_2_CVS/include/linux/slab.h:14, from /usr/src/linux_2_2_CVS/include/linux/malloc.h:4, from /usr/src/linux_2_2_CVS/include/linux/proc_fs.h:5, from init/main.c:15: /usr/src/linux_2_2_CVS/include/asm/atomic.h:46: invalid operands to binary + /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_sub': /usr/src/linux_2_2_CVS/include/asm/atomic.h:55: invalid operands to binary - /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_or': /usr/src/linux_2_2_CVS/include/asm/atomic.h:64: invalid operands to binary | /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_and': /usr/src/linux_2_2_CVS/include/asm/atomic.h:73: invalid operands to binary & /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_add_return':/usr/src/linux_2_2_CVS/include/asm/atomic.h:82: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h:84: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_sub_return':/usr/src/linux_2_2_CVS/include/asm/atomic.h:95: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h:97: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_or_return': /usr/src/linux_2_2_CVS/include/asm/atomic.h:107: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h:109: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h: In function `atomic_and_return':/usr/src/linux_2_2_CVS/include/asm/atomic.h:120: incompatible types in assignment /usr/src/linux_2_2_CVS/include/asm/atomic.h:122: incompatible types in assignment make: *** [init/main.o] Error 1 The steps that I did are : 1. made a linux symlink to linux_2_2_CVS 2. make menuconfig while I am in /usr/src/linux directory 3. make dep CROSS_COMPILE=mips-linux- 4. make CROSS_COMPILE=mips-linux- I want to manage to crosscompile this kernel on a i686 machine for a mips machine. So I saw there that it says something about /usr/include/asm which is for my i686 machine. I guess that the errors come from here. Can you tell me what I have to do. I have to mention that I can crosscompile user application and then I can run tha result on mips and it works. Thanks, Nicu --------------A15BF52BE68D9C32267A9CB0 Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------A15BF52BE68D9C32267A9CB0-- From owner-linux-mips@oss.sgi.com Thu Nov 2 01:03:20 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 01:03:01 -0800 Received: from [212.71.98.33] ([212.71.98.33]:40748 "EHLO intra.pxe.ch") by oss.sgi.com with ESMTP id ; Thu, 2 Nov 2000 01:02:32 -0800 Received: from daesung.co.kr ([63.36.97.226]) by intra.pxe.ch with Microsoft SMTPSVC(5.0.2195.1600); Thu, 2 Nov 2000 09:58:49 +0100 Date: Thu, 02 Nov 2000 16:05:18 -0500 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Message-Id: <856f6t6t4v4jo10gor8.08cu5@daesung.co.kr> From: Lee@dejanosuke.dejavu.co.jp Subject: Information You Requested .... To: bLee@dainong.co.kr X-OriginalArrivalTime: 02 Nov 2000 08:58:50.0430 (UTC) FILETIME=[1E44DDE0:01C044AB] Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Congratulations! On taking a beginning step in Changing your life. Hi, my name is Lee. You were referred to me as someone who was ready for a financial CHANGE, so let me get to the point. I assure you your time will not be wasted. Do you ever wonder how the rich keep getting richer? Do you ever wonder if THEY pay taxes or NOT? Where do they keep their money? How do they invest? Well, I can show you a way to learn and impliment all the above, The Secrets of the Ultra Wealthy. Even better, I will also show you how to make $150,000+ from Home with your telephone and computer. Are you Serious about making $2500 +per week with a simple system where the customer contacts you and you do absolutely NO selling? If You can follow simple, step-by-step instructions and put forth the effort to make this a reality Starting Immediately, then we need to talk. It's in my best interest to train you for success. In fact, I'm so sure that I can do so, I'm willing to put my money where my mouth is! I will provide you with complete Professional Training and Advertising Assistance to put you immediately on the road to success. There's no experience necessary.. However you must have two qualities: 1) Moderate People Skills 2) A Burning Desire for a Personal and Financial Change Take a moment to take the next step by calling me at my Home Office and I will provide you with further information. 1-800-570-3782 ext 0652 24 Hrs/ 7 Days I Wish You Great Prosperity! Lee "Profits are better than wages. Wages make you a living; Profits make you a fortune" - Jim Rohn To be removed send email to dispenceus@yahoo.com From owner-linux-mips@oss.sgi.com Thu Nov 2 04:44:51 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 04:44:41 -0800 Received: from mail.hks.com ([208.157.129.5]:22048 "HELO mail.hks.com") by oss.sgi.com with SMTP id ; Thu, 2 Nov 2000 04:44:12 -0800 Received: from maru.hks.com (fw.hks.com [208.157.128.1]) by mail.hks.com (Postfix) with ESMTP id 62A8A2002331 for ; Thu, 2 Nov 2000 07:44:11 -0500 (EST) Received: from perseus.hks.com (perseus.hks.com [172.16.2.12]) by maru.hks.com (Postfix) with ESMTP id 24534144 for <@hks.com:linux-mips@oss.sgi.com>; Thu, 2 Nov 2000 07:42:37 -0500 (EST) Received: (from donath@localhost) by perseus.hks.com (980427.SGI.8.8.8/970903.SGI) id HAA50057 for linux-mips@oss.sgi.com; Thu, 2 Nov 2000 07:42:36 -0500 (EST) From: "Clarence Donath" Message-Id: <1001102074235.ZM349830@perseus.hks.com> Date: Thu, 2 Nov 2000 07:42:35 -0500 In-Reply-To: Keith M Wesolowski "Re: GCC Compile Failed" (Nov 1, 16:25) References: <20001101224303.A28369@woody.ichilton.co.uk> <20001101162556.C17186@chem.unr.edu> X-Mailer: Z-Mail (5.0.0 30July97) To: linux-mips@oss.sgi.com Subject: GCC Compile Failed MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I've been trying to get GCC to compile on my Indy for weeks now. I started out with the latest version of GCC, and have stepped back to egsc-1.1.2. Each time I try to 'make bootstap', which takes days, I get this error: cc ERROR parsing -W: bad syntax for option cc WARNING: phase key (-) is no longer supported cc ERROR parsing -W: bad phase for -W option cc WARNING: phase key (W) is no longer supported cc ERROR parsing -W: bad phase for -W option cc ERROR parsing -W: unknown flag *** Error code 2 (bu21) *** Error code 1 (bu21) *** Error code 1 (bu21) *** Error code 1 (bu21) I'm trying to compile it using CC as I don't have GCC on this machine now. I do not have the ability to install the freeware copy of GCC from SGI because I do not have root privileges to install. I've configured with a --prefix in my own work area. Can anyone help me out here? Much appreciated. Clarence Donath From owner-linux-mips@oss.sgi.com Thu Nov 2 07:55:42 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 07:55:33 -0800 Received: from [203.186.75.19] ([203.186.75.19]:29445 "EHLO convert rfc822-to-8bit winnt.coulomb.com.hk") by oss.sgi.com with ESMTP id ; Thu, 2 Nov 2000 07:55:12 -0800 Received: from www.hkpresto.com (186_111user100.ctinets.com [203.186.111.100]) by winnt.coulomb.com.hk with SMTP (Microsoft Exchange Internet Mail Service Version 5.5.2650.21) id WA588APD; Thu, 2 Nov 2000 23:53:44 +0800 Subject: MIME-Version: 1.0 Content-Type: text/plain; charset="big5" Content-Transfer-Encoding: 8BIT Date: Thu, 2 Nov 2000 23:54:51 +0800 Message-ID: <1619011189B79843AA07D04FFABF17270195A8@presto-pdc.hkpresto.com> content-class: urn:content-classes:message X-MimeOLE: Produced By Microsoft Exchange V6.0.4368.4 X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Index: AcBE5qCyv0KXYLEcEdSAMwDgTGlUxw== From: "Raymond Wong" To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing From owner-linux-mips@oss.sgi.com Thu Nov 2 09:41:02 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 09:40:52 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:64011 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Thu, 2 Nov 2000 09:40:49 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id JAA25909; Thu, 2 Nov 2000 09:39:52 -0800 Date: Thu, 2 Nov 2000 09:39:52 -0800 From: Keith M Wesolowski To: Nicu Popovici Cc: linux-mips@oss.sgi.com Subject: Re: Soon I will give up on MIPS kernel! Message-ID: <20001102093952.A25612@chem.unr.edu> References: <3A018098.ECB9E20C@isratech.ro> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <3A018098.ECB9E20C@isratech.ro>; from octavp@isratech.ro on Thu, Nov 02, 2000 at 09:56:24AM -0500 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 02, 2000 at 09:56:24AM -0500, Nicu Popovici wrote: > The steps that I did are : > 1. made a linux symlink to linux_2_2_CVS There is absolutely no reason to do this. In fact, it's death. Put the kernel sources in your home directory or a scratch area. Leave everything in /usr/src as it was when you installed your system. > I want to manage to crosscompile this kernel on a i686 machine for a > mips machine. So I saw there that it says something about > /usr/include/asm which is for my i686 machine. I guess that the errors > come from here. Can you tell me what I have to do. I have to mention Yep. Just...don't do that. /usr/src/linux is for your native sources and headers. Do not cross-build kernels in /usr/src, ever. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Thu Nov 2 10:26:43 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 10:26:33 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:14600 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Thu, 2 Nov 2000 10:26:10 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Thu, 02 Nov 2000 13:26:01 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Thu, 2 Nov 2000 13:26:00 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209BA6@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: Indy ram question Date: Thu, 2 Nov 2000 13:24:12 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing will this work in an Indy? "8Meg configuration 72pin 50ns Tested Simms. This is a dutch auction and you will be bidding for the price of 1 ea. These are all tested and working simms. Non-Edo, W-Parity, FPM, all simms have gold fingers." thanks. From owner-linux-mips@oss.sgi.com Thu Nov 2 16:21:35 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 16:21:25 -0800 Received: from u-240.karlsruhe.ipdial.viaginterkom.de ([62.180.21.240]:23313 "EHLO u-240.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 2 Nov 2000 16:21:16 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 2 Nov 2000 13:55:29 +0100 Date: Thu, 2 Nov 2000 13:55:29 +0100 From: Ralf Baechle To: Pete Popov Cc: "linux-mips@oss.sgi.com" Subject: Re: rm7000/orion board Message-ID: <20001102135528.A19967@bacchus.dhis.org> References: <3A00EEDF.7C5E6BD5@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A00EEDF.7C5E6BD5@mvista.com>; from ppopov@mvista.com on Wed, Nov 01, 2000 at 08:34:39PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 01, 2000 at 08:34:39PM -0800, Pete Popov wrote: > There's some R7000 support, apparently added for an "Orion" board. Has > any one had any experience with this board, or with linux on the R7000 > in general? The Orion is an embedded application based on the RM7000, not an evaluation board. The RM7000 as is in CVS isn't currently completly supported. In particular that code doesn't handle the L2 and L3 caches, so as is no DMA I/O is supported for RM7000. Aside of that it's fine CPU with Linux - and one of the few 64-bit MIPSes with sane caches. I got some RM7000 code in the queue - but I will not commit it before it's tested on something better than vapor hardware. Ralf From owner-linux-mips@oss.sgi.com Thu Nov 2 17:28:45 2000 Received: by oss.sgi.com id ; Thu, 2 Nov 2000 17:28:35 -0800 Received: from u-240.karlsruhe.ipdial.viaginterkom.de ([62.180.21.240]:26385 "EHLO u-240.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 2 Nov 2000 17:28:16 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 3 Nov 2000 02:27:55 +0100 Date: Fri, 3 Nov 2000 02:27:55 +0100 From: Ralf Baechle To: tmaloney@ixl.com Cc: linux-mips@oss.sgi.com Subject: Re: Indy ram question Message-ID: <20001103022755.D20869@bacchus.dhis.org> References: <0A5319EEAF65D411825E00805FBBD8A1209BA6@exchange.clt.ixl.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <0A5319EEAF65D411825E00805FBBD8A1209BA6@exchange.clt.ixl.com>; from tmaloney@ixl.com on Thu, Nov 02, 2000 at 01:24:12PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 02, 2000 at 01:24:12PM -0500, tmaloney@ixl.com wrote: > will this work in an Indy? > > "8Meg configuration 72pin 50ns Tested Simms. This is a dutch auction and you > will be bidding for the price of 1 ea. These are all tested and working > simms. Non-Edo, W-Parity, FPM, all simms have gold fingers." Whatever W-Parity means. Indy memory must have true parity not some bullshit like parity generators. Ralf From owner-linux-mips@oss.sgi.com Fri Nov 3 02:21:27 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 02:21:17 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:39435 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 02:21:06 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 22AF07CF1; Fri, 3 Nov 2000 10:21:05 +0000 (GMT) Date: Fri, 3 Nov 2000 10:21:05 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: More GCC problems Message-ID: <20001103102105.A1787@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I posted the other day, with a problem compiling the GCC from oss.sgi.com/pub/linux/mips/mips-linux/simple/crossdev/src I think it was 17/10/2000 IIRC. I am trying to build a static GCC (2.97) using egcs 1.0.3a So, I tried the older 07-07-2000, and this does not work either....arrgh gcc -c -DIN_GCC -W -Wall -Wtraditional -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -pedantic -Wno-long-long -O2 -g -O2 -DHAVE_CONFIG_H -I. -I../../gcc -I../../gcc/config -I../../gcc/../include \ ../../gcc/gencheck.c cc1: Invalid option `-Wno-long-long' make[2]: *** [gencheck.o] Error 1 make[2]: Leaving directory `/mnt/hd2/lfstmp/gcc-000707/gcc-build/gcc' make[1]: *** [bootstrap] Error 2 I tried running make in the gcc directory, and get: gcc -c -DIN_GCC -g -W -Wall -Wtraditional -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -DHAVE_CONFIG_H -I. -I../../gcc -I../../gcc/config -I../../gcc/../include ../../gcc/fold-const.c ../../gcc/fold-const.c: In function `div_and_round_double': ../../gcc/fold-const.c:676: warning: comparison between signed and unsigned ../../gcc/fold-const.c: In function `optimize_bit_field_compare': ../../gcc/fold-const.c:2936: warning: comparison between signed and unsigned ../../gcc/fold-const.c: In function `fold': ../../gcc/fold-const.c:5726: warning: comparison between signed and unsigned ../../gcc/fold-const.c:5737: warning: comparison between signed and unsigned /tmp/cca08866.s: Assembler messages: /tmp/cca08866.s:27593: Error: Branch out of range /tmp/cca08866.s:27632: Error: Branch out of range /tmp/cca08866.s:27637: Error: Branch out of range make: *** [fold-const.o] Error 1 [root@dale:/mnt/hd2/lfstmp/gcc-000707/gcc-build/gcc]# Any ideas? Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Nov 3 02:56:47 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 02:56:38 -0800 Received: from mx.mips.com ([206.31.31.226]:21405 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 02:56:22 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id CAA10781; Fri, 3 Nov 2000 02:56:00 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id CAA03645; Fri, 3 Nov 2000 02:56:00 -0800 (PST) Message-ID: <007d01c04585$25262e40$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Ralf Baechle" , "Jun Sun" Cc: References: <3A0067C5.BA9E3174@mvista.com> <20001102040657.A17786@bacchus.dhis.org> Subject: Re: "Setting flush to zero for ..." - what is the warning? Date: Fri, 3 Nov 2000 11:58:56 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > On Wed, Nov 01, 2000 at 10:58:13AM -0800, Jun Sun wrote: > > > I ran some stress tests and start to get this warning. It appears to be > > generated in do_fpe() routine. See below. I wonder why this is > > happening. Can someone explain what is going on? Thanks. > > It tells you the over-the-thumb-fp-mode has been activated ;-) More seriously, there was (is, in 2.4 I guess) a hack by which, in a desperate attempt to avoid having to do the FP emulation in software, the kernel changed the FPU denorm handling mode and replayed the instruction, in hopes that the problem would go away (which it would for a subset of the unimplemented operation cases). This is not legal IEEE behaviour, as it turns out, but not many people cared. > Somebody at MIPS is working on merging the necessary fp support software > into the kernel, so this problem should be solved soon. Once we had bolted the Algorithmics FPU emulator into the kernel, the hack was no longer necessary. To say that "somebody at MIPS is working on merging the necessary fp support software into the kernel" is perhaps a bit misleading. The FPU emulator itself is in the oss.sgi.com repository, in the 2_2 branch, but I did not merge in the hacks to the kernel exception, context, signal, etc. handling. And there are several bug fixes that have been made since then. All the additional code is available on the ftp.mips.com server, and has been merged by others into 2.3/2.4, most notably by the VrLinux guys. We've got 2.4-test running in the lab, but it is a long way from being as robust under torture as our 2.2 kernel, and we have not decided whether it is "ripe" enough to merge in the FPU emulation support ourselves. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Fri Nov 3 04:04:37 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 04:04:28 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:43019 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 04:04:19 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 8BF3E7CF1; Fri, 3 Nov 2000 12:04:18 +0000 (GMT) Date: Fri, 3 Nov 2000 12:04:18 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: CVS GCC Broken (001103) Message-ID: <20001103120418.A1950@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have been trying to compile GCC from today nativly, but it gives me the same error I got with the 07102000 one from oss. It works when cross-compiling with make-cross though.... Nativly (with egcs 1.0.3a) I get : /usr/bin/ld:libgcc.map:1: parse error in VERSION script collect2: ld returned 1 exit status make[3]: *** [libgcc_s.so] Error 1 make[3]: Leaving directory `/mnt/hd2/lfstmp/gcc/gcc-build/gcc' make[2]: *** [libgcc.a] Error 2 make[2]: Leaving directory `/mnt/hd2/lfstmp/gcc/gcc-build/gcc' make[1]: *** [stage_a] Error 2 make[1]: Leaving directory `/mnt/hd2/lfstmp/gcc/gcc-build/gcc' make: *** [bootstrap] Error 2 Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Nov 3 05:21:57 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 05:21:47 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:64091 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 05:21:27 -0800 Received: from relay.istanbul.sgi.com (relay.istanbul.sgi.com [144.253.232.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id FAA01872 for ; Fri, 3 Nov 2000 05:13:36 -0800 (PST) mail_from (Huseyin@sgi.com) Received: from nt-emea-trbdc.istanbul.sgi.com (nt-emea-trbdc.istanbul.sgi.com [144.253.232.21]) by relay.istanbul.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA19979 for ; Fri, 3 Nov 2000 15:02:22 +0200 (MET) Received: by nt-emea-trbdc.istanbul.sgi.com with Internet Mail Service (5.5.2650.21) id ; Fri, 3 Nov 2000 15:03:18 +0200 Message-ID: <801EE44EFDA5D411AFA90090278610F3019D0B@nt-emea-trbdc.istanbul.sgi.com> From: Huseyin Sasmaz To: "'linux-mips@oss.sgi.com'" Subject: linux on Origin200 Date: Fri, 3 Nov 2000 15:03:18 +0200 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-9" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Did anyone try to use linux on Origin 200? Any feedback will be appreciated From owner-linux-mips@oss.sgi.com Fri Nov 3 05:27:07 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 05:26:58 -0800 Received: from router.isratech.ro ([193.226.114.69]:23816 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 05:26:50 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA3DQDA12440 for ; Fri, 3 Nov 2000 15:26:14 +0200 Message-ID: <3A032BBF.4D0613B5@isratech.ro> Date: Fri, 03 Nov 2000 16:18:55 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: ATLAS board! Content-Type: multipart/mixed; boundary="------------B20037D365E5BA09C0C07B32" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------B20037D365E5BA09C0C07B32 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello , I have an Atlas board with a mips processor. I managed to cross compile a MIPS kernel on our I686 machines but when I try to load the kernel image on the mips with the following command ( I do not know other way and if there is one please let me know ) "load tftp:/linux/mipseb/vmlinux " I get the following error About to load tftp://192.168.200.1/linux/mipseb/di_vmlinux5000 Press Ctrl-C to break Error : Line too long Diag : Line 1, ELF Can anyone help me ? Regards, Nicu --------------B20037D365E5BA09C0C07B32 Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------B20037D365E5BA09C0C07B32-- From owner-linux-mips@oss.sgi.com Fri Nov 3 05:37:48 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 05:37:39 -0800 Received: from mx.mips.com ([206.31.31.226]:16542 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 05:37:34 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id FAA11417; Fri, 3 Nov 2000 05:36:54 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id FAA06990; Fri, 3 Nov 2000 05:37:11 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id OAA21463; Fri, 3 Nov 2000 14:35:49 +0100 (MET) Message-ID: <3A02BF34.6D0B52D5@mips.com> Date: Fri, 03 Nov 2000 14:35:49 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: ATLAS board! References: <3A032BBF.4D0613B5@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing The loader in the prom-monitor (YAMON), doesn't understand the elf-format, you have to convert your kernel image to a SREC format. You can do it the following way: objcopy -O srec vmlinux vmlinux.srec /Carsten Nicu Popovici wrote: > Hello , > > I have an Atlas board with a mips processor. I managed to cross compile > a MIPS kernel on our I686 machines but when I try to load the kernel > image on the mips with the following command ( I do not know other way > and if there is one please let me know ) "load > tftp:/linux/mipseb/vmlinux " I get the following error > > About to load tftp://192.168.200.1/linux/mipseb/di_vmlinux5000 > Press Ctrl-C to break > Error : Line too long > Diag : Line 1, ELF > > Can anyone help me ? > > Regards, > Nicu -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Fri Nov 3 06:27:18 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 06:27:09 -0800 Received: from unidial.com ([206.112.0.9]:50482 "EHLO unidial.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 06:26:46 -0800 Received: from unidial.com (IDENT:root@1Cust180.tnt14.chi5.da.uu.net [63.22.172.180]) by unidial.com (8.9.3/8.9.3) with ESMTP id JAA19318; Fri, 3 Nov 2000 09:26:33 -0500 (EST) Message-ID: <3A02CCD9.95243DD0@unidial.com> Date: Fri, 03 Nov 2000 09:34:01 -0500 From: Alan Hoyt X-Mailer: Mozilla 4.73 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 To: Huseyin Sasmaz CC: "'linux-mips@oss.sgi.com'" Subject: Re: linux on Origin200 References: <801EE44EFDA5D411AFA90090278610F3019D0B@nt-emea-trbdc.istanbul.sgi.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Did you try searching the archive? http://oss.sgi.com/projects/LinuxScalability/ http://oss.sgi.com/projects/LinuxScalability/download/mips64.announce - Alan - Huseyin Sasmaz wrote: > Did anyone try to use linux on Origin 200? > > Any feedback will be appreciated From owner-linux-mips@oss.sgi.com Fri Nov 3 06:37:49 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 06:37:39 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:46347 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 06:37:27 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id F06687CF1; Fri, 3 Nov 2000 14:37:25 +0000 (GMT) Date: Fri, 3 Nov 2000 14:37:25 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Re: More GCC problems Message-ID: <20001103143725.A2123@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > /tmp/cca08866.s: Assembler messages: > /tmp/cca08866.s:27593: Error: Branch out of range > /tmp/cca08866.s:27632: Error: Branch out of range > /tmp/cca08866.s:27637: Error: Branch out of range I get this same thing, when doing this: - use make-cross.sh to build a cross compiling envronment using the current cvs stuff - 001103 - cross compile gcc-001017 using this: CC="mips-linux-gcc -I/scratch/crossdev/mips-linux/mips-linux/include" CC_FOR_BUILD=cc GCC_FOR_TARGET="mips-linux-gcc -I/s/crossdev/mips-linux/include" AR=mips-linux-ar RANLIB=mips-linux-ranlib LD=mips-linux-ld ../configure --prefix=/usr --enable-threads --enable-languages=c --host=mips-linux --target=mips-linux --build=`../config.guess` && make PLEASE someone help me out here.... I have spent the last 2 days trying to compile GCC. I have tried every version I can find, from 07072000 to 1707200 which suposidly work, to the lastest CVS version. I have tried native and cross compiling.... The only gcc builds I have had work is egcs-1.0.3a, and a 2.97 cross compile. I need a 2.97 native build, static, to compile glibc 2.2, then build a 2.97 dynamic. HEEEELLLP! Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Nov 3 09:55:50 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 09:55:40 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:21499 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 09:55:30 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eA3HrT317793; Fri, 3 Nov 2000 09:53:29 -0800 Message-ID: <3A02FC13.338F4CF6@mvista.com> Date: Fri, 03 Nov 2000 09:55:31 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: "Setting flush to zero for ..." - what is the warning? References: <3A0067C5.BA9E3174@mvista.com> <20001102040657.A17786@bacchus.dhis.org> <007d01c04585$25262e40$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Kevin D. Kissell" wrote: > > > On Wed, Nov 01, 2000 at 10:58:13AM -0800, Jun Sun wrote: > > > > > I ran some stress tests and start to get this warning. It appears to be > > > generated in do_fpe() routine. See below. I wonder why this is > > > happening. Can someone explain what is going on? Thanks. > > > > It tells you the over-the-thumb-fp-mode has been activated ;-) > > More seriously, there was (is, in 2.4 I guess) a hack by which, > in a desperate attempt to avoid having to do the FP emulation > in software, the kernel changed the FPU denorm handling mode > and replayed the instruction, in hopes that the problem would > go away (which it would for a subset of the unimplemented > operation cases). This is not legal IEEE behaviour, as it turns out, > but not many people cared. > I am reading between the lines. Do you mean 1) even though the CPU (R5432 in this case) has a FPU, some instructions (or under certain conditions) are NOT supported by the hardware? 2) So in those cases, software should do the job, but the existing 2.4 is not doing it right? 3) Can we summarize exactly what instructions (under what conditions) are considered not supported by hardware? Or is it too complicated to summarieze in short? Or should it be documented in CPU manual (which may vary for different CPUs) > > Somebody at MIPS is working on merging the necessary fp support software > > into the kernel, so this problem should be solved soon. > > Once we had bolted the Algorithmics FPU emulator into the kernel, > the hack was no longer necessary. To say that "somebody at MIPS > is working on merging the necessary fp support software into the > kernel" is perhaps a bit misleading. The FPU emulator itself is in > the oss.sgi.com repository, in the 2_2 branch, but I did not merge > in the hacks to the kernel exception, context, signal, etc. handling. > And there are several bug fixes that have been made since then. > All the additional code is available on the ftp.mips.com server, and > has been merged by others into 2.3/2.4, most notably by the VrLinux > guys. > If I understand correctly, FPU emulator is for the case where FPU is completely absent. Does it do the job we are talking about here? Thanks. Jun ... totally ignorant about FPU From owner-linux-mips@oss.sgi.com Fri Nov 3 10:08:40 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 10:08:30 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:2318 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 10:08:15 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id KAA08341; Fri, 3 Nov 2000 10:07:28 -0800 Date: Fri, 3 Nov 2000 10:07:28 -0800 From: Keith M Wesolowski To: Ian Chilton Cc: linux-mips@oss.sgi.com Subject: Re: More GCC problems Message-ID: <20001103100728.A8133@chem.unr.edu> References: <20001103143725.A2123@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20001103143725.A2123@woody.ichilton.co.uk>; from mailinglist@ichilton.co.uk on Fri, Nov 03, 2000 at 02:37:25PM +0000 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Nov 03, 2000 at 02:37:25PM +0000, Ian Chilton wrote: > Hello, > > > /tmp/cca08866.s: Assembler messages: > > /tmp/cca08866.s:27593: Error: Branch out of range > > /tmp/cca08866.s:27632: Error: Branch out of range > > /tmp/cca08866.s:27637: Error: Branch out of range > > I get this same thing, when doing this: Don't blame the compiler. This is a gas problem. You should be able to get around it by using optimization; -O2 is sufficient I believe. If not, you may have to use -Os. > PLEASE someone help me out here.... I have spent the last 2 days > trying to compile GCC. I have tried every version I can find, from > 07072000 to 1707200 which suposidly work, to the lastest CVS > version. I have tried native and cross compiling.... I need a 2.97 > native build, static, to compile glibc 2.2, then build a 2.97 > dynamic. I have no idea how to build a static compiler. The approach I took to get my working native 1019 compiler was to cross-build it with the same version. Since it was built against glibc 2.2, I simply installed both glibc 2.2 and the new native compiler on my system. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Fri Nov 3 10:31:40 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 10:31:30 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:5322 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 10:31:09 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id TAA27731; Fri, 3 Nov 2000 19:27:02 +0100 (MET) Date: Fri, 3 Nov 2000 19:27:01 +0100 (MET) From: "Maciej W. Rozycki" To: Keith M Wesolowski cc: Ian Chilton , linux-mips@oss.sgi.com Subject: Re: More GCC problems In-Reply-To: <20001103100728.A8133@chem.unr.edu> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 3 Nov 2000, Keith M Wesolowski wrote: > I have no idea how to build a static compiler. The approach I took to Just add "-static" to CFLAGS in the usual way. > get my working native 1019 compiler was to cross-build it with the > same version. Since it was built against glibc 2.2, I simply installed > both glibc 2.2 and the new native compiler on my system. But check the "cross_compile" statement in the gcc's specs file. Depending on the way of installing a cross-compiled native compiler on the host machine you may get it right or not -- it should be "0". I had to tweak it manually when making an RPM package of gcc-2.95.3 (packages available from ftp://ftp.ds2.pg.gda.pl/pub/macro). -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Fri Nov 3 10:36:00 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 10:35:50 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:21003 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 10:35:35 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Fri, 03 Nov 2000 13:35:24 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Fri, 3 Nov 2000 13:35:24 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209BCF@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: will this drive work in an Indy? Date: Fri, 3 Nov 2000 13:33:38 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Quantum Atlas II 4GB SCA drive fit for SGI Octane or O2. Model: HN4550SCA. SGI P/N 064-0039-001. 7200RPM Spindle Speed 3.5" SCA Interface/80 pin Bare Drive Only From owner-linux-mips@oss.sgi.com Fri Nov 3 10:44:10 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 10:44:00 -0800 Received: from wopr.scooter.cx ([216.254.73.145]:14091 "EHLO wopr.scooter.cx") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 10:43:54 -0800 Received: from localhost (scott@localhost) by wopr.scooter.cx (8.9.3/8.9.3) with ESMTP id NAA07448; Fri, 3 Nov 2000 13:43:48 -0500 Date: Fri, 3 Nov 2000 13:43:48 -0500 (EST) From: Scott Venier To: tmaloney@ixl.com cc: linux-mips@oss.sgi.com Subject: Re: will this drive work in an Indy? In-Reply-To: <0A5319EEAF65D411825E00805FBBD8A1209BCF@exchange.clt.ixl.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing nope. Indy's (or at least my indy) has a standard scsi interface, not sca. Scott On Fri, 3 Nov 2000 tmaloney@ixl.com wrote: > Quantum Atlas II 4GB SCA drive fit for SGI Octane or O2. Model: HN4550SCA. > SGI P/N 064-0039-001. > > 7200RPM Spindle Speed > 3.5" > SCA Interface/80 pin > Bare Drive Only > From owner-linux-mips@oss.sgi.com Fri Nov 3 10:52:40 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 10:52:20 -0800 Received: from mx.mips.com ([206.31.31.226]:31137 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 10:52:13 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id KAA13878; Fri, 3 Nov 2000 10:51:50 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id KAA15523; Fri, 3 Nov 2000 10:52:06 -0800 (PST) Message-ID: <01cd01c045c7$9f49db80$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" Cc: "Ralf Baechle" , References: <3A0067C5.BA9E3174@mvista.com> <20001102040657.A17786@bacchus.dhis.org> <007d01c04585$25262e40$0deca8c0@Ulysses> <3A02FC13.338F4CF6@mvista.com> Subject: Re: "Setting flush to zero for ..." - what is the warning? Date: Fri, 3 Nov 2000 19:55:13 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > "Kevin D. Kissell" wrote: > > > > > On Wed, Nov 01, 2000 at 10:58:13AM -0800, Jun Sun wrote: > > > > > > > I ran some stress tests and start to get this warning. It appears to be > > > > generated in do_fpe() routine. See below. I wonder why this is > > > > happening. Can someone explain what is going on? Thanks. > > > > > > It tells you the over-the-thumb-fp-mode has been activated ;-) > > > > More seriously, there was (is, in 2.4 I guess) a hack by which, > > in a desperate attempt to avoid having to do the FP emulation > > in software, the kernel changed the FPU denorm handling mode > > and replayed the instruction, in hopes that the problem would > > go away (which it would for a subset of the unimplemented > > operation cases). This is not legal IEEE behaviour, as it turns out, > > but not many people cared. > > > > I am reading between the lines. Do you mean > > 1) even though the CPU (R5432 in this case) has a FPU, some instructions > (or under certain conditions) are NOT supported by the hardware? That is correct. See (3) below. > 2) So in those cases, software should do the job, but the existing 2.4 > is not doing it right? That is sort-of correct. The mini-emulator in the existing distribution will handle a subset of the common cases correctly. The flush-to-zero trick avoids another subset, though not stricktly speaking correctly. > 3) Can we summarize exactly what instructions (under what conditions) > are considered not supported by hardware? Or is it too complicated to > summarieze in short? Or should it be documented in CPU manual (which > may vary for different CPUs) Architecturally, a MIPS FPU is always allowed to deliver an Unimplemented Operation instruction if the combination of instruction and operand values goes beyond what it can deal with. In theory, that means that it would be legal to simply not implement certain difficult instructions altogether (I have no examples of this) or to implement single-precision but not double-precision operands (this, I believe, has been done). But even in full-blown implementations like the R4000/4400 or R5000 or R5432, there are often corner cases that the designers considered too expensive to handle in hardware. In general, these fall into two categories: conversion operations on extreme values that exceed the size of the shifter in the FPU, and operations on denormalized values - according to the IEEE standard, 2.0 denorm + 2.0 denorm = 4.0 denorm, but it's a rare RISC FPU that will really perform that computation. Setting flush-denormals-to-zero can thus avoid these exceptions, but won't provide the values stipulated by the IEEE spec, either. > > > Somebody at MIPS is working on merging the necessary fp support software > > > into the kernel, so this problem should be solved soon. > > > > Once we had bolted the Algorithmics FPU emulator into the kernel, > > the hack was no longer necessary. To say that "somebody at MIPS > > is working on merging the necessary fp support software into the > > kernel" is perhaps a bit misleading. The FPU emulator itself is in > > the oss.sgi.com repository, in the 2_2 branch, but I did not merge > > in the hacks to the kernel exception, context, signal, etc. handling. > > And there are several bug fixes that have been made since then. > > All the additional code is available on the ftp.mips.com server, and > > has been merged by others into 2.3/2.4, most notably by the VrLinux > > guys. > > > > If I understand correctly, FPU emulator is for the case where FPU is > completely absent. Does it do the job we are talking about here? We integrated the Algorithmics FPU emulator because there are embedded MIPS chips out there (the MIPS 4Kc/m/p and 5K, the NEC Vr41xx, the Toshiba Tx49) that have no FPUs and really need the full emulation. But while it may seem like overkill, having the full emulator does cover the unimplemented corner cases very nicely. With a couple of fixes elsewhere (the kernel branch emulation had/has a signed/unsigned bug), we finally have MIPS/Linux platforms that pass the "paranoia" IEEE FP compliance test 100%, with and without FPUs. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Fri Nov 3 10:54:40 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 10:54:20 -0800 Received: from unidial.com ([206.112.0.9]:18534 "EHLO unidial.com") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 10:54:19 -0800 Received: from unidial.com (IDENT:root@1Cust87.tnt14.chi5.da.uu.net [63.22.172.87]) by unidial.com (8.9.3/8.9.3) with ESMTP id NAA16491; Fri, 3 Nov 2000 13:54:14 -0500 (EST) Message-ID: <3A030B96.A63E8291@unidial.com> Date: Fri, 03 Nov 2000 14:01:42 -0500 From: Alan Hoyt X-Mailer: Mozilla 4.73 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 To: tmaloney@ixl.com CC: linux-mips@oss.sgi.com Subject: [OT] Re: will this drive work in an Indy? References: <0A5319EEAF65D411825E00805FBBD8A1209BCF@exchange.clt.ixl.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Yes, but you need an SCA(80) to 68/50 pin adapter. tmaloney@ixl.com wrote: > Quantum Atlas II 4GB SCA drive fit for SGI Octane or O2. Model: HN4550SCA. > SGI P/N 064-0039-001. > > 7200RPM Spindle Speed > 3.5" > SCA Interface/80 pin > Bare Drive Only From owner-linux-mips@oss.sgi.com Fri Nov 3 12:05:00 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 12:04:41 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:51979 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 12:04:34 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 25F077CF1; Fri, 3 Nov 2000 20:04:32 +0000 (GMT) Date: Fri, 3 Nov 2000 20:04:32 +0000 From: Ian Chilton To: Keith M Wesolowski Cc: linux-mips@oss.sgi.com Subject: Re: More GCC problems Message-ID: <20001103200432.A2615@woody.ichilton.co.uk> Reply-To: ian@ichilton.co.uk References: <20001103143725.A2123@woody.ichilton.co.uk> <20001103100728.A8133@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i In-Reply-To: <20001103100728.A8133@chem.unr.edu>; from wesolows@chem.unr.edu on Fri, Nov 03, 2000 at 10:07:28AM -0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Don't blame the compiler. This is a gas problem. You should be able to > get around it by using optimization; -O2 is sufficient I believe. If > not, you may have to use -Os. -Os? > I have no idea how to build a static compiler. make -LDFLAGS=-static but just make didn't work either.. > The approach I took t > get my working native 1019 compiler was to cross-build it with the > same versiona The problem is, I can't cross-compile either :( Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Nov 3 12:42:41 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 12:42:31 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:30982 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 12:42:24 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Fri, 03 Nov 2000 15:42:13 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Fri, 3 Nov 2000 15:42:13 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209BD8@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: Indy hard drive Date: Fri, 3 Nov 2000 15:40:24 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing will this work in an Indy? > -----Original Message----- > From: Maloney, Tim (CLT) > Sent: Friday, November 03, 2000 3:40 PM > To: Maloney, Tim (CLT) > Subject: > > SPECIFICATIONS > Characteristics: > Unformatted Capacity 10,800 MB > Formatted Capacity (512) byte blk) 9,090 MB > Average Sectors Per Track 133 (rounded down) > Actuator Type Rotary Voice Coil > Tracks 132,975 > Cylinders 4925 > Heads 26 > Discs (5.25 in) 14 > Performance: > Internal Transfer Rate (mbits/sec) 44 - 65 > External Transfer Rate (mbits/sec) 10 (burst) > Spindle Speed (RPM) 5,400 > Average Latency (msec) 5.55 > Buffer 1024 Kbyte > Interface 50 Pin SCSI-2 FAST > Bytes Per Track (avg) 42,000-55,440 > TPI (Tracks Per Inch) 2,250 > Average Access (ms read/write) 11/12 > Single Track Seek (ms) 0.9/1.7 > Max Full Seek (ms) 23/24 > General: > MTBF (power-on hours) Office 500,000 > Power Requirements: Single -ended +12V Start-up +12V Typical +5V Start-up > +5V Typical 4.8 1.57 0.98 0.665 > Typical (Watts seek / read) 32.60 > Idle (Watts) 28.34 > Landing Zone (cyl) Auto Park > Physical Height: 3.25 in / 82.6 mm Width: 5.75 in / 146.1 mm Depth: > 8.0 in / 203 mm Weight: 7.8lb / 3.6 kg > > > > > > Tim Maloney > Senior Developer > iXL, Inc. > 1930 Camden Road, Suite 2070 > Charlotte, NC 28203 > 704 943-7193 phone > tmaloney@ixl.com > www.ixl.com > From owner-linux-mips@oss.sgi.com Fri Nov 3 13:06:31 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 13:06:11 -0800 Received: from u-120.karlsruhe.ipdial.viaginterkom.de ([62.180.10.120]:53266 "EHLO u-120.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 13:06:02 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 3 Nov 2000 17:18:05 +0100 Date: Fri, 3 Nov 2000 17:18:05 +0100 From: Ralf Baechle To: Ian Chilton Cc: linux-mips@oss.sgi.com Subject: Re: More GCC problems Message-ID: <20001103171805.F24751@bacchus.dhis.org> References: <20001103143725.A2123@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001103143725.A2123@woody.ichilton.co.uk>; from mailinglist@ichilton.co.uk on Fri, Nov 03, 2000 at 02:37:25PM +0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Nov 03, 2000 at 02:37:25PM +0000, Ian Chilton wrote: > Hello, > > > /tmp/cca08866.s: Assembler messages: > > /tmp/cca08866.s:27593: Error: Branch out of range > > /tmp/cca08866.s:27632: Error: Branch out of range > > /tmp/cca08866.s:27637: Error: Branch out of range This is a bug in all MIPS versions of gas I've ever examined, including the vendors of GNU based development systems like Algorithmics. The problem is that gcc is producing code that results in loops of over 128kb size, so the range of a normal branch is exceeded. Gas should then convert assembler code such as loop: # > 128kb loop body bnez reg, loop into: loop: # > 128kb loop body beq reg, endloop jump loop endloop: That's a non-trivial gas modification. This is becoming an increasing problem with today's codesize. Right now only few applications are affected but Moore's law is mercyless ... In this particular case I'll simply optimizing the code with -O1 or higher will help by getting the loop body's size below 128kb size. This may also help with other affected packages. It's however only a temporary solution; we'll see code in the not to far future where the optimizer is no longer able to get the code size below the critical size of 128kb. Ralf From owner-linux-mips@oss.sgi.com Fri Nov 3 13:06:31 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 13:06:11 -0800 Received: from u-120.karlsruhe.ipdial.viaginterkom.de ([62.180.10.120]:53266 "EHLO u-120.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 13:06:02 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 3 Nov 2000 18:16:09 +0100 Date: Fri, 3 Nov 2000 18:16:09 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: HZ Message-ID: <20001103181608.A25339@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing 2.4.0-test10 finally received a mechanism which allows a userprogram to find about the frequency at which times() is counting by calling sysconf(_SC_CLK_TCK). It requires glibc 2.2 from 2000-11-01 or later. As the result I plan to remove our current kernel patches which fake a 100HZ rate for machines with clock rates other than 100Hz as soon as I can assume glibc 2.2 to be reasonably well established. Since the Linux distribution work for 2.0 is already essentilly dead I hope this will soon be the case. Right now DECstations are the only affected machines; everybody else can ignore this message. Ralf From owner-linux-mips@oss.sgi.com Fri Nov 3 13:20:51 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 13:20:31 -0800 Received: from u-120.karlsruhe.ipdial.viaginterkom.de ([62.180.10.120]:54546 "EHLO u-120.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 13:20:05 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 3 Nov 2000 22:19:26 +0100 Date: Fri, 3 Nov 2000 22:19:26 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Kernel compiler Message-ID: <20001103221926.A26082@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Due to compiler bugs with named initializers the use of egcs 1.1.2 has ben deprecated for Linux; Linux 2.4.0-test10 will refuse to compile with older compilers. mips64 users can ignore this message; they're currently all using egcs 1.1.2 and therefore not affected. Ralf From owner-linux-mips@oss.sgi.com Fri Nov 3 13:45:21 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 13:45:01 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:14284 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 13:44:31 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id WAA02775; Fri, 3 Nov 2000 22:41:40 +0100 (MET) Date: Fri, 3 Nov 2000 22:41:40 +0100 (MET) From: "Maciej W. Rozycki" To: ian@ichilton.co.uk cc: Keith M Wesolowski , linux-mips@oss.sgi.com Subject: Re: More GCC problems In-Reply-To: <20001103200432.A2615@woody.ichilton.co.uk> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 3 Nov 2000, Ian Chilton wrote: > > I have no idea how to build a static compiler. > > make -LDFLAGS=-static > but just make didn't work either.. $ CFLAGS='-static' ./configure $ make That's the usual way. You need to specify necessary options to configure as well. You may also put other options in CFLAGS. You may also specify other variables -- CC, CXX, CXXFLAGS and LDFLAGS are likely to work. For others you need to study configure scripts yourself. For example I use more or less the following commands to build an i386-linux hosted cross-compiler for mipsel-linux on an i386-linux build system: $ mkdir -p obj && cd obj $ CC="i386-linux-gcc" CXX="i386-linux-g++" \ CFLAGS="-pipe -O2 -fomit-frame-pointer" \ CXXFLAGS="-pipe -O2 -fomit-frame-pointer" \ ../configure --prefix=/usr \ --with-local-prefix=/usr/mipsel-linux/local \ --enable-shared --enable-haifa --enable-threads \ --cache-file=config.cache \ --build=i386-linux --host=i386-linux --target=mipsel-linux $ make all and the following lines to build a mipsel-linux native compiler on an i386-linux build system: $ mkdir -p obj && cd obj $ CC="i386-linux-gcc" CXX="i386-linux-g++" \ CC_FOR_BUILD="i386-linux-gcc" \ CXX_FOR_BUILD="i386-linux-g++" \ CC_FOR_TARGET="mipsel-linux-gcc" \ CXX_FOR_TARGET="mipsel-linux-g++" \ CFLAGS="-pipe -O2 -fomit-frame-pointer" \ CXXFLAGS="-pipe -O2 -fomit-frame-pointer" \ ../configure --prefix=/usr \ --enable-shared --enable-haifa --enable-threads \ --cache-file=config.cache \ --build=i386-linux --host=mipsel-linux --target=mipsel-linux $ make all Note also you need to have glibc headers for the target system installed on your build system before performing either builds. I believe gcc expects them to be found in ${prefix}/${target_alias}/sys-include (that would be /usr/mipsel-linux/sys-include for the above examples). It will copy them to ${prefix}/${target_alias}/include upon build. If you do not fear of deep RPM magic, you may try to bootstrap a compiler toolchain using packages I made available at ftp://ftp.ds2.pg.gda.pl/pub/macro. You'll need .rpm* files available there -- as you are building for mips-linux and I use mipsel-linux, you'll have to tweak all the files with `sed s/mipsel/mips/g'. Then you may start building binary packages from source ones. You will have to modify mipsel-linux-* packages slightly -- basically `sed s/mipsel/mips/g' again. You need to build packages in a specific order and install every built package before proceeding to the following one. The order is: 1. mips-linux-binutils, mips-linux-boot-glibc-headers (in any order), 2. mips-linux-boot-gcc, 3. mips-linux-glibc, 4. mips-linux-gcc, 5. binutils, gcc (native, for mips-linux; basically any mips-linux software). Spec files include appropriate "BuildRequires" statements to remind you (and rpm) which packages have be installed to build a given package. The packages reflect the way I bootstrapped a mipsel-linux system from scratch on an i386-linux build system. Gcc is 2.95.3 (or 2.95.2 plus a few patches, actually), which is sufficient to build glibc 2.2. You may build a current gcc snapshot with it if you need to. Please note there is a compatibility breakage as of Oct 28th (see the README file available at the site; it's also explained in change logs for binutils and glibc). You may want to fetch earlier binutils and glibc packages (barring the binary compatibility they work equally well) if you insist on a compatibility with a current binutils snapshot and binaries available throughout the Internet. I'll submit an appropriate change to the binutils CVS soon; glibc 2.1.97 already has the fix applied. I hope this helps, Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Fri Nov 3 18:45:05 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 18:44:45 -0800 Received: from ppp0.ocs.com.au ([203.34.97.3]:38413 "HELO mail.ocs.com.au") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 18:44:32 -0800 Received: (qmail 15851 invoked from network); 4 Nov 2000 02:44:22 -0000 Received: from ocs3.ocs-net (192.168.255.3) by mail.ocs.com.au with SMTP; 4 Nov 2000 02:44:22 -0000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Kernel compiler In-reply-to: Your message of "Fri, 03 Nov 2000 22:19:26 BST." <20001103221926.A26082@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 04 Nov 2000 13:44:22 +1100 Message-ID: <5029.973305862@ocs3.ocs-net> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 3 Nov 2000 22:19:26 +0100, Ralf Baechle wrote: >Due to compiler bugs with named initializers the use of egcs 1.1.2 has >ben deprecated for Linux; Linux 2.4.0-test10 will refuse to compile with >older compilers. Correction. gcc 2.7 has been deprecated, the recommended version is gcc 2.91.66 (also known as egcs 1.1.2) or better. Unfortunately RedHat created an unofficial 2.96 which is known to miscompile the kernel, so you cannot just use the "latest" gcc. It is believed that gcc versions 2.91.66 through 2.95 inclusive are safe, as long as you use -fno-strict-aliasing. From owner-linux-mips@oss.sgi.com Fri Nov 3 18:54:15 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 18:54:05 -0800 Received: from u-120.karlsruhe.ipdial.viaginterkom.de ([62.180.10.120]:12036 "EHLO u-120.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 18:53:49 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 4 Nov 2000 03:53:26 +0100 Date: Sat, 4 Nov 2000 03:53:26 +0100 From: Ralf Baechle To: Keith Owens Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Kernel compiler Message-ID: <20001104035326.A29005@bacchus.dhis.org> References: <20001103221926.A26082@bacchus.dhis.org> <5029.973305862@ocs3.ocs-net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <5029.973305862@ocs3.ocs-net>; from kaos@melbourne.sgi.com on Sat, Nov 04, 2000 at 01:44:22PM +1100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Nov 04, 2000 at 01:44:22PM +1100, Keith Owens wrote: > On Fri, 3 Nov 2000 22:19:26 +0100, > Ralf Baechle wrote: > >Due to compiler bugs with named initializers the use of egcs 1.1.2 has > >ben deprecated for Linux; Linux 2.4.0-test10 will refuse to compile with > >older compilers. > > Correction. gcc 2.7 has been deprecated, the recommended version is > gcc 2.91.66 (also known as egcs 1.1.2) or better. Unfortunately RedHat > created an unofficial 2.96 which is known to miscompile the kernel, so > you cannot just use the "latest" gcc. It is believed that gcc versions > 2.91.66 through 2.95 inclusive are safe, as long as you use > -fno-strict-aliasing. Sigh, yes you're right as other have already pointed out on IRC ... Gcc 2.7 is no longer being used for Linux/MIPS since a long time and I'd simply bitbucket any bugreport related to it. Most people are using egcs 1.0.3a for everything which is older than the required minimum version 1.1.2, so we're in some trouble. I've got reports regarding the 1.1.2 crosscompiler which say that it misscompiles MIPS kernels, sigh ... The reports regarding egcs 2.96 and newer misscompiling the kernel only affect x86 or are other architecture affected as well? I don't have any pending compiler >= 2.96 related bug reports. Ralf From owner-linux-mips@oss.sgi.com Fri Nov 3 19:04:05 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 19:03:55 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:1551 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 19:03:35 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id TAA15781; Fri, 3 Nov 2000 19:03:01 -0800 Date: Fri, 3 Nov 2000 19:03:01 -0800 From: Keith M Wesolowski To: Ralf Baechle Cc: Keith Owens , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Kernel compiler Message-ID: <20001103190301.A15760@chem.unr.edu> References: <20001103221926.A26082@bacchus.dhis.org> <5029.973305862@ocs3.ocs-net> <20001104035326.A29005@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20001104035326.A29005@bacchus.dhis.org>; from ralf@oss.sgi.com on Sat, Nov 04, 2000 at 03:53:26AM +0100 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Nov 04, 2000 at 03:53:26AM +0100, Ralf Baechle wrote: > The reports regarding egcs 2.96 and newer misscompiling the kernel only > affect x86 or are other architecture affected as well? I don't have any > pending compiler >= 2.96 related bug reports. Somewhere between 1019 and 1023, a bug was introduced which causes miscompilation. Symptom is oops on boot during RPC port lookups. I don't know if this is still present, nor the exact nature of the bug. It appears that some address offsets changed in the compiled code from gcc 1019 to gcc 1023. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Fri Nov 3 19:11:05 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 19:10:45 -0800 Received: from mta5.snfc21.pbi.net ([206.13.28.241]:51874 "EHLO convert rfc822-to-8bit mta5.snfc21.pbi.net") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 19:10:35 -0800 Received: from zeus.mvista.com ([63.192.220.206]) by mta5.snfc21.pbi.net (Sun Internet Mail Server sims.3.5.2000.01.05.12.18.p9) with SMTP id <0G3H00AX7CNA8J@mta5.snfc21.pbi.net>; Fri, 3 Nov 2000 19:06:47 -0800 (PST) Date: Sat, 04 Nov 2000 03:10:50 +0000 (GMT) From: Pete Popov Subject: Re: Kernel compiler In-reply-to: <20001104035326.A29005@bacchus.dhis.org> To: Ralf Baechle Cc: Keith Owens , linux-mips@oss.sgi.com, linux-mips@fnet.fr Message-id: <20001104.3105000@zeus.mvista.com> MIME-version: 1.0 X-Mailer: Mozilla/3.0 (compatible; StarOffice/5.2;Linux) Content-type: text/plain; charset=ISO-8859-1 Content-transfer-encoding: 8BIT References: <20001103221926.A26082@bacchus.dhis.org> <5029.973305862@ocs3.ocs-net> <20001104035326.A29005@bacchus.dhis.org> X-Priority: 3 (Normal) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<< On 11/3/00, 6:53:26 PM, Ralf Baechle wrote regarding Re: Kernel compiler: > On Sat, Nov 04, 2000 at 01:44:22PM +1100, Keith Owens wrote: > > On Fri, 3 Nov 2000 22:19:26 +0100, > > Ralf Baechle wrote: > > >Due to compiler bugs with named initializers the use of egcs 1.1.2 has > > >ben deprecated for Linux; Linux 2.4.0-test10 will refuse to compile with > > >older compilers. > > > > Correction. gcc 2.7 has been deprecated, the recommended version is > > gcc 2.91.66 (also known as egcs 1.1.2) or better. Unfortunately RedHat > > created an unofficial 2.96 which is known to miscompile the kernel, so > > you cannot just use the "latest" gcc. It is believed that gcc versions > > 2.91.66 through 2.95 inclusive are safe, as long as you use > > -fno-strict-aliasing. > Sigh, yes you're right as other have already pointed out on IRC ... > Gcc 2.7 is no longer being used for Linux/MIPS since a long time and I'd > simply bitbucket any bugreport related to it. Most people are using egcs > 1.0.3a for everything which is older than the required minimum version 1.1.2, > so we're in some trouble. > I've got reports regarding the 1.1.2 crosscompiler which say that it > misscompiles MIPS kernels, sigh ... What are the symptoms of a "miscompiled" kernel and how does one detect that (assuming that the kernel actually compiles successfully, but has problems running). Pete From owner-linux-mips@oss.sgi.com Fri Nov 3 19:14:05 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 19:13:45 -0800 Received: from ppp0.ocs.com.au ([203.34.97.3]:46349 "HELO mail.ocs.com.au") by oss.sgi.com with SMTP id ; Fri, 3 Nov 2000 19:13:42 -0800 Received: (qmail 16060 invoked from network); 4 Nov 2000 03:13:38 -0000 Received: from ocs3.ocs-net (192.168.255.3) by mail.ocs.com.au with SMTP; 4 Nov 2000 03:13:38 -0000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Kernel compiler In-reply-to: Your message of "Sat, 04 Nov 2000 03:53:26 BST." <20001104035326.A29005@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sat, 04 Nov 2000 14:13:37 +1100 Message-ID: <5652.973307617@ocs3.ocs-net> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 4 Nov 2000 03:53:26 +0100, Ralf Baechle wrote: >The reports regarding egcs 2.96 and newer misscompiling the kernel only >affect x86 or are other architecture affected as well? I don't have any >pending compiler >= 2.96 related bug reports. At a guess (and it is only a guess), the problems will affect all architectures. AFAICT they are in the common optimization phase, the kernel uses constructs that were undefined or poorly defined but worked in gcc 2.95, 2.96 handles them differently. From owner-linux-mips@oss.sgi.com Fri Nov 3 19:20:55 2000 Received: by oss.sgi.com id ; Fri, 3 Nov 2000 19:20:35 -0800 Received: from u-120.karlsruhe.ipdial.viaginterkom.de ([62.180.10.120]:15620 "EHLO u-120.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 3 Nov 2000 19:20:24 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 4 Nov 2000 04:20:02 +0100 Date: Sat, 4 Nov 2000 04:20:02 +0100 From: Ralf Baechle To: Pete Popov Cc: Keith Owens , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Kernel compiler Message-ID: <20001104042002.A29373@bacchus.dhis.org> References: <20001103221926.A26082@bacchus.dhis.org> <5029.973305862@ocs3.ocs-net> <20001104035326.A29005@bacchus.dhis.org> <20001104.3105000@zeus.mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001104.3105000@zeus.mvista.com>; from ppopov@pacbell.net on Sat, Nov 04, 2000 at 03:10:50AM +0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Nov 04, 2000 at 03:10:50AM +0000, Pete Popov wrote: > > Sigh, yes you're right as other have already pointed out on IRC ... > > > Gcc 2.7 is no longer being used for Linux/MIPS since a long time and I'd > > simply bitbucket any bugreport related to it. Most people are using egcs > > 1.0.3a for everything which is older than the required minimum version > 1.1.2, > > so we're in some trouble. > > > I've got reports regarding the 1.1.2 crosscompiler which say that it > > misscompiles MIPS kernels, sigh ... > > What are the symptoms of a "miscompiled" kernel and how does one detect > that (assuming that the kernel actually compiles successfully, but has > problems running). When trying to work on a serial terminal hooked up to an Indy it'll oops. Question is if the compiler is buggy or if it's particular code generation is just triggering a bug in the kernel code. Ralf From owner-linux-mips@oss.sgi.com Sat Nov 4 02:39:57 2000 Received: by oss.sgi.com id ; Sat, 4 Nov 2000 02:39:48 -0800 Received: from lightning.swansea.linux.org.uk ([194.168.151.1]:2846 "EHLO the-village.bc.nu") by oss.sgi.com with ESMTP id ; Sat, 4 Nov 2000 02:39:34 -0800 Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 13s0ke-0004Sa-00; Sat, 4 Nov 2000 10:40:44 +0000 Subject: Re: Kernel compiler To: ralf@oss.sgi.com (Ralf Baechle) Date: Sat, 4 Nov 2000 10:40:42 +0000 (GMT) Cc: kaos@melbourne.sgi.com (Keith Owens), linux-mips@oss.sgi.com, linux-mips@fnet.fr In-Reply-To: <20001104035326.A29005@bacchus.dhis.org> from "Ralf Baechle" at Nov 04, 2000 03:53:26 AM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > The reports regarding egcs 2.96 and newer misscompiling the kernel only > affect x86 or are other architecture affected as well? I don't have any > pending compiler >= 2.96 related bug reports. The Red Hat 2.96 seems to compile 2.2 correctly when you fix the 2.2 bugs but does miscompile x86 fs/buffers.c on 2.4 according to reports. I think with mips you'd have to experiment. Also AFAIK that tree branch hasn't been tested on mips From owner-linux-mips@oss.sgi.com Sun Nov 5 15:57:44 2000 Received: by oss.sgi.com id ; Sun, 5 Nov 2000 15:57:35 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:28940 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Sun, 5 Nov 2000 15:57:17 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 524717CD4; Sun, 5 Nov 2000 23:57:15 +0000 (GMT) Date: Sun, 5 Nov 2000 23:57:15 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Patch Problems with Glibc 2.2 Message-ID: <20001105235715.A5531@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am having a problem with patch under glibc 2.2 patch: **** Only garbage was found in the patch input. If I exit my chroot, back to my 2.0.6 base and use the same source dir, with the same patch there, it works fine, so it is definatly the patch program. It was compiled exactly the same way as the 2.0.6 based base too. Tried re-compiling, and still the same.. Everything else so far seems to work under my 2.2 base, incl compiler etc.. Anyone seen this before? Any ideas? Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Sun Nov 5 16:04:55 2000 Received: by oss.sgi.com id ; Sun, 5 Nov 2000 16:04:44 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:29196 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Sun, 5 Nov 2000 16:04:37 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id A29C57CF1; Mon, 6 Nov 2000 00:04:35 +0000 (GMT) Date: Mon, 6 Nov 2000 00:04:35 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Problem Compiling 2.2.14 CVS after enabling NFSROOT Message-ID: <20001106000435.A5550@woody.ichilton.co.uk> Reply-To: ian@ichilton.co.uk Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am trying to compile 2.2.14 from CVS. I compiled it serveral times with no problem, and it booted my local system, but would not boot my nfsroot. Then I found the NFSROOT option, so I enabled that, and comipled the kernel again, and this time it failed: make[1]: Leaving directory `/usr/src/linux-2.2.14/arch/mips/lib' ld -static -G 0 -T arch/mips/ld.script.big -Ttext 0x88002000 arch/mips/kernel/head.o arch/mips/kernel/init_task.o init/main.o init/version.o \ --start-group \ arch/mips/kernel/kernel.o arch/mips/mm/mm.o kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o \ fs/filesystems.a \ net/network.a \ drivers/block/block.a drivers/char/char.a drivers/misc/misc.a drivers/net/net.a drivers/scsi/scsi.a drivers/cdrom/cdrom.a drivers/sgi/sgi.a drivers/video/video.a \ arch/mips/lib/lib.a /usr/src/linux/lib/lib.a arch/mips/sgi/kernel/sgikern.a arch/mips/arc/arclib.a \ --end-group \ -o vmlinux fs/filesystems.a(nfs.o): In function `nfs_read_super': inode.c(.text.init+0x614): undefined reference to `rpc_getport_external' inode.c(.text.init+0x614): relocation truncated to fit: R_MIPS_26 rpc_getport_external make: *** [vmlinux] Error 1 bash-2.04# What have I done? :) Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Nov 6 03:41:57 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 03:41:47 -0800 Received: from chmls20.mediaone.net ([24.147.1.156]:58872 "EHLO chmls20.mediaone.net") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 03:41:31 -0800 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.248.129]) by chmls20.mediaone.net (8.8.7/8.8.7) with SMTP id GAA08431; Mon, 6 Nov 2000 06:41:24 -0500 (EST) From: "Jay Carlson" To: , Subject: RE: The initial results (Re: stable binutils, gcc, glibc ... Date: Mon, 6 Nov 2000 06:43:25 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <39ED2166.9B5F970@mvista.com> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > I also had success with latest binutils CVS tree. I gave a try to the > latest gcc, but did not look into it further. > > http://sourceware.cygnus.com/binutils > cvs -z 9 -d :pserver:anoncvs@anoncvs.cygnus.com:/cvs/src co -D "Oct 13, > 2000" binutils OK, I've decided to bite the bullet and try to get current on everything. Most of the patches I've seen lying around have been integrated into binutils and gcc. Congratulations! However, there's still this lingering issue with binutils. The ulfc patches haven't been integrated, and I'm worried that I'm going to run into the "binutils generate busted relocs" problem as a result. What's the resolution of that issue? Patch still needed? Patch not needed if the only two binutils ever used are 2.8.1 and current-cvs (>2.10)? Jay From owner-linux-mips@oss.sgi.com Mon Nov 6 12:07:32 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 12:07:23 -0800 Received: from u-245.karlsruhe.ipdial.viaginterkom.de ([62.180.10.245]:58375 "EHLO u-245.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 12:07:15 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Mon, 6 Nov 2000 20:44:26 +0100 Date: Mon, 6 Nov 2000 20:44:26 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: MIPS HOWTO Message-ID: <20001106204426.A23625@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing November 15 is the deadline for a new edition of ``Linux, the Complete Reference'' which the MIPS Howto will be part of. So please everybody take a look at the documente at http://oss.sgi.com/mips/mips-howto.html and send me updates, preferably as unified diffs for the SGML source code. Ralf From owner-linux-mips@oss.sgi.com Mon Nov 6 13:55:32 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 13:55:22 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:49164 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Mon, 6 Nov 2000 13:55:06 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 6E2D77CD4; Mon, 6 Nov 2000 21:55:04 +0000 (GMT) Date: Mon, 6 Nov 2000 21:55:04 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Findutils and Fileutils under Glibc 2.2 Message-ID: <20001106215504.A7157@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am having more problems with packages that worked fine under glibc 2.2 File utils gives this error: gcc -DLOCALEDIR=\"/usr/share/locale\" -DSHAREDIR=\"/usr/share\" -DHAVE_CONFIG_H -I.. -I. -I../lib -I../intl -D_FILE_OFFSET_BITS=64 -g -O2 -c dircolors.c dircolors.c:40:15: 1 arguments is not enough for macro "strndup" make[2]: *** [dircolors.o] Error 1 make[2]: Leaving directory `/lfstmp/fileutils-4.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/lfstmp/fileutils-4.0' make: *** [all-recursive-am] Error 2 Findutils errors, but does not exit :( (I only noticed because find did not exist).. during make install, gives: making install in find /bin/sh: invalid character 47 in exportstr for /root make[1]: Entering directory `/lfstmp/findutils-4.1/find' gcc -c -DHAVE_CONFIG_H -I.. -I../lib -g -O fstype.c fstype.c:34:15: 1 arguments is not enough for macro "strstr" make[1]: *** [fstype.o] Error 1 make[1]: Leaving directory `/lfstmp/findutils-4.1/find' making install in xargs /bin/sh: invalid character 47 in exportstr for /root make[1]: Entering directory `/lfstmp/findutils-4.1/xargs' gcc -c -DHAVE_CONFIG_H -I.. -I../lib -g -O ../find/version.c gcc -o xargs xargs.o ../find/version.o ../lib/libfind.a -lintl gcc: ../find/version.o: No such file or directory make[1]: *** [xargs] Error 1 make[1]: Leaving directory `/lfstmp/findutils-4.1/xargs' making install in locate /bin/sh: invalid character 47 in exportstr for /root make[1]: Entering directory `/lfstmp/findutils-4.1/locate' gcc -c -DHAVE_CONFIG_H -I.. -I../lib -DLOCATE_DB=\"/usr/var/locatedb\" -g -O ../find/version.c gcc -o locate locate.o ../find/version.o ../lib/libfind.a -lintl gcc: ../find/version.o: No such file or directory make[1]: *** [locate] Error 1 make[1]: Leaving directory `/lfstmp/findutils-4.1/locate' Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Nov 6 14:05:23 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 14:05:13 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:49676 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Mon, 6 Nov 2000 14:05:00 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 751057CF1; Mon, 6 Nov 2000 22:04:54 +0000 (GMT) Date: Mon, 6 Nov 2000 22:04:54 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Re: Findutils and Fileutils under Glibc 2.2 Message-ID: <20001106220454.A7190@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Fixed the fileutils problem...just patch and findutils not working.. Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Nov 6 18:18:25 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 18:18:15 -0800 Received: from chmls20.mediaone.net ([24.147.1.156]:49886 "EHLO chmls20.mediaone.net") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 18:18:02 -0800 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.248.129]) by chmls20.mediaone.net (8.8.7/8.8.7) with SMTP id VAA18468; Mon, 6 Nov 2000 21:18:00 -0500 (EST) From: "Jay Carlson" To: , Subject: kernel should not reject -mips2 ELF binaries Date: Mon, 6 Nov 2000 21:20:00 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing include/asm-mips/elf.h contains a macro, elf_check_arch, that decides if an executable is plausible to run under this kernel. It currently accepts binaries flagged as MIPS1 ISA, and rejects all other ISAs. #define elf_check_arch(hdr) \ ({ \ int __res = 1; \ struct elfhdr *__h = (hdr); \ \ if ((__h->e_machine != EM_MIPS) && \ (__h->e_machine != EM_MIPS_RS4_BE)) \ __res = 0; \ if (__h->e_flags & EF_MIPS_ARCH) \ __res = 0; \ \ __res; \ }) I think we should make an exception for MIPS2. Turns out that the two Linux VR processor families benefit from some of the MIPS II features; most notably, code density is improved by eliminating load delay slots. If I build executables that take advantage of this, they legitimately should be flagged with E_MIPS_ARCH_2 (since they won't run on my decstation). So what's the right way to fix this? Three things come to mind: 1) rip out the EF_MIPS_ARCH check from elf_check_arch. 2) compare the value with E_MIPS_ARCH_1 and E_MIPS_ARCH_2 3) figure out what the capabilities of the current processor are and reject E_MIPS_ARCH2 on R2/3000s. I'd just go do #3 except it looks like a bigger pain than it's worth. No other linux kernel port goes to that amount of trouble, of course. (I may do #1 or #2 in the Linux VR CVS as a stopgap.) Jay From owner-linux-mips@oss.sgi.com Mon Nov 6 18:28:34 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 18:28:24 -0800 Received: from u-245.karlsruhe.ipdial.viaginterkom.de ([62.180.10.245]:64263 "EHLO u-245.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 18:28:20 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 7 Nov 2000 03:28:02 +0100 Date: Tue, 7 Nov 2000 03:28:02 +0100 From: Ralf Baechle To: Jay Carlson Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: kernel should not reject -mips2 ELF binaries Message-ID: <20001107032802.D28567@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from nop@nop.com on Mon, Nov 06, 2000 at 09:20:00PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 06, 2000 at 09:20:00PM -0500, Jay Carlson wrote: > include/asm-mips/elf.h contains a macro, elf_check_arch, that decides if an > executable is plausible to run under this kernel. It currently accepts > binaries flagged as MIPS1 ISA, and rejects all other ISAs. > > #define elf_check_arch(hdr) \ > ({ \ > int __res = 1; \ > struct elfhdr *__h = (hdr); \ > \ > if ((__h->e_machine != EM_MIPS) && \ > (__h->e_machine != EM_MIPS_RS4_BE)) \ > __res = 0; \ > if (__h->e_flags & EF_MIPS_ARCH) \ > __res = 0; \ > \ > __res; \ > }) > > I think we should make an exception for MIPS2. Turns out that the two Linux > VR processor families benefit from some of the MIPS II features; most > notably, code density is improved by eliminating load delay slots. If I > build executables that take advantage of this, they legitimately should be > flagged with E_MIPS_ARCH_2 (since they won't run on my decstation). > > So what's the right way to fix this? Three things come to mind: > > 1) rip out the EF_MIPS_ARCH check from elf_check_arch. Take 1). The problem we have is distiguishing Linux binaries from IRIX binaries. The code causing problems for you is a heuristic that no longer works these days so I'll have to come up with something new. Ralf From owner-linux-mips@oss.sgi.com Mon Nov 6 18:58:26 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 18:58:16 -0800 Received: from chmls20.mediaone.net ([24.147.1.156]:32507 "EHLO chmls20.mediaone.net") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 18:58:03 -0800 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.248.129]) by chmls20.mediaone.net (8.8.7/8.8.7) with SMTP id VAA08386; Mon, 6 Nov 2000 21:58:01 -0500 (EST) From: "Jay Carlson" To: "Ralf Baechle" , "Jay Carlson" Cc: , Subject: RE: kernel should not reject -mips2 ELF binaries Date: Mon, 6 Nov 2000 22:00:02 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0) In-Reply-To: <20001107032802.D28567@bacchus.dhis.org> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > if (__h->e_flags & EF_MIPS_ARCH) \ > > __res = 0; \ > > So what's the right way to fix this? Three things come to mind: > > > > 1) rip out the EF_MIPS_ARCH check from elf_check_arch. > > Take 1). The problem we have is distiguishing Linux binaries from IRIX > binaries. The code causing problems for you is a heuristic that no > longer works these days so I'll have to come up with something new. OK. I'm going to remove the above two lines in the Linux VR CVS repository. Thanks! Jay From owner-linux-mips@oss.sgi.com Mon Nov 6 19:40:16 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 19:40:06 -0800 Received: from u-245.karlsruhe.ipdial.viaginterkom.de ([62.180.10.245]:3080 "EHLO u-245.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 19:39:43 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 7 Nov 2000 04:39:22 +0100 Date: Tue, 7 Nov 2000 04:39:22 +0100 From: Ralf Baechle To: Alan Cox Cc: Keith Owens , linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Kernel compiler Message-ID: <20001107043922.A31298@bacchus.dhis.org> References: <20001104035326.A29005@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from alan@lxorguk.ukuu.org.uk on Sat, Nov 04, 2000 at 10:40:42AM +0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Nov 04, 2000 at 10:40:42AM +0000, Alan Cox wrote: > > The reports regarding egcs 2.96 and newer misscompiling the kernel only > > affect x86 or are other architecture affected as well? I don't have any > > pending compiler >= 2.96 related bug reports. > > The Red Hat 2.96 seems to compile 2.2 correctly when you fix the 2.2 bugs but > does miscompile x86 fs/buffers.c on 2.4 according to reports. I think with mips > you'd have to experiment. Also AFAIK that tree branch hasn't been tested on > mips I asked Cort about their PPC experience and they also got trouble. Reason enough to ignore gcc-current for kernel use for now. It's doing well for userland however so we'll also have to use two compilers from now on, one for kernel and one for userland. Btw, I've now placed srpm and i386-linux rpms of a new release of the egcs-1.1.2 Linux/MIPS crosscompiler on oss.sgi.com. Users of the 64-bit kernel, read Origin users should also update as this release has several fixes. Ralf From owner-linux-mips@oss.sgi.com Mon Nov 6 20:57:06 2000 Received: by oss.sgi.com id ; Mon, 6 Nov 2000 20:56:46 -0800 Received: from [199.239.207.12] ([199.239.207.12]:1523 "EHLO enabtech.com") by oss.sgi.com with ESMTP id ; Mon, 6 Nov 2000 20:56:42 -0800 Received: from jawad ([206.82.141.26]) by enabtech.com (8.9.3/8.9.3) with SMTP id VAA08334; Mon, 6 Nov 2000 21:00:19 -0800 (PST) Message-ID: <002101c04877$dbc6a270$2a00a8c0@enabtech> From: "Jawad Qureshi" To: Cc: Subject: How to Unsubsribe from this list Date: Tue, 7 Nov 2000 10:01:51 +0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_001E_01C048A1.C03E3250" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_001E_01C048A1.C03E3250 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable ------=_NextPart_000_001E_01C048A1.C03E3250 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
 
------=_NextPart_000_001E_01C048A1.C03E3250-- From owner-linux-mips@oss.sgi.com Tue Nov 7 03:06:38 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 03:06:29 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:60684 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 03:06:11 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 2FC137CD4; Tue, 7 Nov 2000 11:06:10 +0000 (GMT) Date: Tue, 7 Nov 2000 11:06:10 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org Subject: User/Group Problem Message-ID: <20001107110610.A8074@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am building a Linux system on an SGI I2 (MIPS) with glibc 2.2 I am having the following problem....any ideas? bash-2.04# chown root test.c chown: root: invalid user bash-2.04# chgrp root test.c chgrp: invalid group name `root' bash-2.04# cat /etc/passwd root:1D0t80HeWTfNE:0:0:root:/root:/bin/bash bash-2.04# cat /etc/group root:x:0: Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Tue Nov 7 06:41:21 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 06:41:11 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:1292 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 06:40:49 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Tue, 07 Nov 2000 09:40:31 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Tue, 7 Nov 2000 09:40:31 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209C42@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: mips dist? Date: Tue, 7 Nov 2000 09:38:42 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Is there an installable distribution of Linux for mips, or does it have to be built from scratch? I've heard of Hard Hat Linux, but I dodn't know how complete it was. From owner-linux-mips@oss.sgi.com Tue Nov 7 06:49:20 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 06:49:11 -0800 Received: from boco.fee.vutbr.cz ([147.229.9.11]:28432 "EHLO boco.fee.vutbr.cz") convert rfc822-to-8bit by oss.sgi.com with ESMTP id ; Tue, 7 Nov 2000 06:49:08 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.1/8.11.1) with ESMTP id eA7Emsf94338 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Tue, 7 Nov 2000 15:49:05 +0100 (CET) Received: (from xmichl03@localhost) by fest.stud.fee.vutbr.cz (8.11.0/8.11.0) id eA7EmsJ72390; Tue, 7 Nov 2000 15:48:54 +0100 (CET) From: Michl Ladislav Date: Tue, 7 Nov 2000 15:48:54 +0100 (CET) X-processed: pine.send To: tmaloney@ixl.com cc: linux-mips@oss.sgi.com Subject: Re: mips dist? In-Reply-To: <0A5319EEAF65D411825E00805FBBD8A1209C42@exchange.clt.ixl.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-2 Content-Transfer-Encoding: 8BIT Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 7 Nov 2000 tmaloney@ixl.com wrote: > Is there an installable distribution of Linux for mips, or does it have to > be built from scratch? > > I've heard of Hard Hat Linux, but I dodn't know how complete it was. Debian. It works fine for me. Check Debian site (www.debian.org), especially mips mailing list archives for details. Have a nice day Laïa. From owner-linux-mips@oss.sgi.com Tue Nov 7 06:50:51 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 06:50:40 -0800 Received: from boco.fee.vutbr.cz ([147.229.9.11]:32272 "EHLO boco.fee.vutbr.cz") by oss.sgi.com with ESMTP id ; Tue, 7 Nov 2000 06:50:32 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.1/8.11.1) with ESMTP id eA7EoTf94482 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK) for ; Tue, 7 Nov 2000 15:50:29 +0100 (CET) Received: (from xmichl03@localhost) by fest.stud.fee.vutbr.cz (8.11.0/8.11.0) id eA7EoSw72535; Tue, 7 Nov 2000 15:50:28 +0100 (CET) From: Michl Ladislav Date: Tue, 7 Nov 2000 15:50:28 +0100 (CET) X-processed: pine.send To: linux-mips@oss.sgi.com Subject: setenv eaddr Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi all, I was looking to the archives and HOWTOs to find way how to change eaddr of sgi Indy (which was incorrectly set after 2.4.0-test6 crash) and find couple of questions and no answer. I think about -p switch of setenv mentioned in archives supposing that it means "permanent" and trying to imagine how to FORCE set eaddr. This is the key. >> setenv -f eaddr 12:34:56:78:9a:bc Maybye you find this information usefull. I'm sorry to trouble you if you already know it. Regards Ladislav Michl PS: It's nice to see Linux running on sgi Indy. Thanks. From owner-linux-mips@oss.sgi.com Tue Nov 7 07:03:00 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 07:02:50 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:64780 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 07:02:27 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 2C78A7CD4; Tue, 7 Nov 2000 15:02:26 +0000 (GMT) Date: Tue, 7 Nov 2000 15:02:26 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Re: mips dist? Message-ID: <20001107150226.B8414@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, There are no installable ports for MIPS, except Hardhat, which is old and very outdated. > Debian. It works fine for me. Check Debian site (www.debian.org), > especially mips mailing list archives for details. uhmm...AFAIK, there are some Debian glibc 2.2 packages being uploaded now, but there is no full distro with +installer for MIPS.... Correct me if i'm wrong though.. Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Tue Nov 7 07:05:10 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 07:05:00 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:57609 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 07:04:47 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Tue, 07 Nov 2000 10:04:19 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Tue, 7 Nov 2000 10:04:19 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209C48@exchange.clt.ixl.com> From: tmaloney@ixl.com To: ian@ichilton.co.uk Cc: linux-mips@oss.sgi.com Subject: RE: mips dist? Date: Tue, 7 Nov 2000 10:02:31 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing i went to debian, and i think you're right. i couldn't find an installable dist anywhere. -----Original Message----- From: Ian Chilton [mailto:mailinglist@ichilton.co.uk] Sent: Tuesday, November 07, 2000 10:02 AM To: linux-mips@oss.sgi.com Subject: Re: mips dist? Hello, There are no installable ports for MIPS, except Hardhat, which is old and very outdated. > Debian. It works fine for me. Check Debian site (www.debian.org), > especially mips mailing list archives for details. uhmm...AFAIK, there are some Debian glibc 2.2 packages being uploaded now, but there is no full distro with +installer for MIPS.... Correct me if i'm wrong though.. Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Tue Nov 7 07:24:40 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 07:24:30 -0800 Received: from boco.fee.vutbr.cz ([147.229.9.11]:64273 "EHLO boco.fee.vutbr.cz") convert rfc822-to-8bit by oss.sgi.com with ESMTP id ; Tue, 7 Nov 2000 07:24:17 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.1/8.11.1) with ESMTP id eA7FO8f02044 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Tue, 7 Nov 2000 16:24:09 +0100 (CET) Received: (from xmichl03@localhost) by fest.stud.fee.vutbr.cz (8.11.0/8.11.0) id eA7FO8a74658; Tue, 7 Nov 2000 16:24:08 +0100 (CET) From: Michl Ladislav Date: Tue, 7 Nov 2000 16:24:08 +0100 (CET) X-processed: pine.send To: Ian Chilton cc: linux-mips@oss.sgi.com Subject: Re: mips dist? In-Reply-To: <20001107150110.A8414@woody.ichilton.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-2 Content-Transfer-Encoding: 8BIT Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 7 Nov 2000, Ian Chilton wrote: > uhmm...AFAIK, there are some Debian glibc 2.2 packages being uploaded > now, but there is no full distro with installer for MIPS.... > > Correct me if i'm wrong though.. Imagine this situation: sgi Indy with clean HDD, no floppy, no CD-ROM. Can you imagine any user friendly way to install linux? However, it's possible to make package which sets up neccesary things on remote machine and then simply boot mips :-) You are right, Debian is not "full distro". BTW, what do you mean by this term? You could do following: download kernel and base-files from ftp://ftp.rfc822.org/pub/local/debian-mips/. install bootp, tftp and nfs server on another machine (howto can be found in archives) and boot linux from this remote computer. after that you can partition your harddisk, create filesystems and copy kernel and base-files. instruction how to boot linux directly from harddisk (for indy) can be found at: http://honk.physik.uni-konstanz.de/linux-mips/indy-boot/indy-hd-boot-micro-howto.html now, you have fully functional Debian/GNU Linux, just wait for new packages :-) if you are interested by this way of instalation, let me know i'll send you neccessary configuration files. Regards Laïa. ps. i'm sorry if i don't exactly understand what you want to do and sorry for my weak english. From owner-linux-mips@oss.sgi.com Tue Nov 7 07:28:40 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 07:28:30 -0800 Received: from [194.98.116.10] ([194.98.116.10]:6405 "EHLO hermes.epita.fr") by oss.sgi.com with ESMTP id ; Tue, 7 Nov 2000 07:28:21 -0800 Received: from purple42.epx.epita.fr (purple42.epx.epita.fr [10.225.7.1]) by hermes.epita.fr id QAA18444 for EPITA Paris France Tue, 7 Nov 2000 16:27:19 GMT Received: by purple42.epx.epita.fr (Postfix, from userid 501) id D1B1B48D; Tue, 7 Nov 2000 16:26:53 +0100 (CET) Date: Tue, 7 Nov 2000 16:26:53 +0100 From: Thomas Poindessous To: linux-mips@oss.sgi.com Subject: Decstation 5000/200 Message-ID: <20001107162653.A31659@purple42.epx.epita.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I have one IBM Decstation 5000/200 (PowerServer). I have minicom it but nothing, no garbage, nada. The little led behind are set like this. .XXX..XX (X light, . no light) After two day of google, I still can't find what are errors code ? Where can I find these errors code ? BTW, is there a port for Mips Magnum R4000 (Big endian) ? Thanks -- Thomas Poindessous EpX asso GNU/Linux de l'Epita epx@epita.fr && http://www.epita.fr/~epx From owner-linux-mips@oss.sgi.com Tue Nov 7 08:07:11 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 08:07:00 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:1037 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 08:06:52 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 026AA7CF1; Tue, 7 Nov 2000 16:06:50 +0000 (GMT) Date: Tue, 7 Nov 2000 16:06:50 +0000 From: Ian Chilton To: Michl Ladislav Cc: linux-mips@oss.sgi.com Subject: Re: mips dist? Message-ID: <20001107160650.A8493@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > You could do following: download kernel and base-files from > ftp://ftp.rfc822.org/pub/local/debian-mips/. install bootp, tftp and nfs > server on another machine (howto can be found in archives) and boot linux > from this remote computer. after that you can partition your harddisk, > create filesystems and copy kernel and base-files. instruction how to boot > linux directly from harddisk (for indy) can be found at: > http://honk.physik.uni-konstanz.de/linux-mips/indy-boot/indy-hd-boot-micro-howto.html > now, you have fully functional Debian/GNU Linux, just wait for new > packages :-) I know about this. There is also Simple Linux/MIPS, and soon, my own base systems which will be downloadable, but to answer the origional question, there is no full distro for Linux/MIPS with a proper installer, except the very old, outdated, broken Hardhat. However, on a brigher note, things are moving on at the moment. Ralf is working on a Redhat 7.0, based on glibc 2.2, and Flo (lolo) has started uploading debian packages based on glibc 2.2 to debian.org, so we are moving closed to having some working, easier to install systems. Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ian@ichilton.co.uk | |-----------------------------------------------------------------| | Backup E-Mail --> ian@ichilton.dhis.org ICQ #: 16007717 | | Web Site --> http://www.ichilton.co.uk | |-----------------------------------------------------------------| | "Unix is user friendly - it's just picky about it's friends." | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Tue Nov 7 08:14:51 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 08:14:31 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:17670 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 08:14:17 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Tue, 07 Nov 2000 11:14:00 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Tue, 7 Nov 2000 11:13:59 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209C51@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: RE: mips dist? Date: Tue, 7 Nov 2000 11:12:14 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing excellent, i await your reports. -----Original Message----- From: Ian Chilton [mailto:ian@ichilton.co.uk] Sent: Tuesday, November 07, 2000 11:07 AM To: Michl Ladislav Cc: linux-mips@oss.sgi.com Subject: Re: mips dist? Hello, > You could do following: download kernel and base-files from > ftp://ftp.rfc822.org/pub/local/debian-mips/. install bootp, tftp and nfs > server on another machine (howto can be found in archives) and boot linux > from this remote computer. after that you can partition your harddisk, > create filesystems and copy kernel and base-files. instruction how to boot > linux directly from harddisk (for indy) can be found at: > http://honk.physik.uni-konstanz.de/linux-mips/indy-boot/indy-hd-boot-micro-h owto.html > now, you have fully functional Debian/GNU Linux, just wait for new > packages :-) I know about this. There is also Simple Linux/MIPS, and soon, my own base systems which will be downloadable, but to answer the origional question, there is no full distro for Linux/MIPS with a proper installer, except the very old, outdated, broken Hardhat. However, on a brigher note, things are moving on at the moment. Ralf is working on a Redhat 7.0, based on glibc 2.2, and Flo (lolo) has started uploading debian packages based on glibc 2.2 to debian.org, so we are moving closed to having some working, easier to install systems. Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ian@ichilton.co.uk | |-----------------------------------------------------------------| | Backup E-Mail --> ian@ichilton.dhis.org ICQ #: 16007717 | | Web Site --> http://www.ichilton.co.uk | |-----------------------------------------------------------------| | "Unix is user friendly - it's just picky about it's friends." | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Tue Nov 7 09:26:30 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 09:26:21 -0800 Received: from gnyf.wheel.dk ([193.162.159.104]:39145 "EHLO gnyf.wheel.dk") by oss.sgi.com with ESMTP id ; Tue, 7 Nov 2000 09:26:01 -0800 Received: (from soren@localhost) by gnyf.wheel.dk (8.9.1/8.9.1) id SAA13802; Tue, 7 Nov 2000 18:25:55 +0100 (CET) Date: Tue, 7 Nov 2000 18:25:55 +0100 From: "Soren S. Jorvang" To: Michl Ladislav Cc: linux-mips@oss.sgi.com Subject: Re: setenv eaddr Message-ID: <20001107182555.A13791@gnyf.wheel.dk> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from xmichl03@stud.fee.vutbr.cz on Tue, Nov 07, 2000 at 03:50:28PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 07, 2000 at 03:50:28PM +0100, Michl Ladislav wrote: > I was looking to the archives and HOWTOs to find way how to change eaddr > of sgi Indy (which was incorrectly set after 2.4.0-test6 crash) and find http://www.netbsd.org/Ports/sgimips/faq.html (no, NetBSD doesn't actually run on the Indy yet). -- Soren From owner-linux-mips@oss.sgi.com Tue Nov 7 12:37:41 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 12:37:32 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:39182 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Tue, 7 Nov 2000 12:37:18 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id BBB7084B; Tue, 7 Nov 2000 21:37:15 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 419548F81; Tue, 7 Nov 2000 21:37:08 +0100 (CET) Date: Tue, 7 Nov 2000 21:37:08 +0100 From: Florian Lohoff To: Thomas Poindessous Cc: linux-mips@oss.sgi.com Subject: Re: Decstation 5000/200 Message-ID: <20001107213708.G1930@paradigm.rfc822.org> References: <20001107162653.A31659@purple42.epx.epita.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <20001107162653.A31659@purple42.epx.epita.fr>; from poinde_t@epita.fr on Tue, Nov 07, 2000 at 04:26:53PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 07, 2000 at 04:26:53PM +0100, Thomas Poindessous wrote: > Hi, > I have one IBM Decstation 5000/200 (PowerServer). > I have minicom it but nothing, no garbage, nada. Are you sure you are not on the wrong serial ? Do you have a Framebuffer and Keyboard attached ? > The little led behind are set like this. > > .XXX..XX (X light, . no light) > > After two day of google, I still can't find what are errors code ? > Where can I find these errors code ? They are in the Decstation Hardware Reference Manual delivered with the Decstation - I havent got them handy right now but probably someone could copy them to a digital form and put it into the Mips HOWTO. > BTW, is there a port for Mips Magnum R4000 (Big endian) ? Hmm - From memory: yes - But i dont think it'll work out of the box as the have been a lot of kernel changes and nobody cared on the Mips Magnum Port. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Tue Nov 7 23:54:37 2000 Received: by oss.sgi.com id ; Tue, 7 Nov 2000 23:54:27 -0800 Received: from router.isratech.ro ([193.226.114.69]:45840 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Tue, 7 Nov 2000 23:54:12 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA87rbM05625 for ; Wed, 8 Nov 2000 09:53:44 +0200 Message-ID: <3A09753F.DB2457EE@isratech.ro> Date: Wed, 08 Nov 2000 10:46:07 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: MIPS kernel! Content-Type: multipart/mixed; boundary="------------302C573CB07886B58EA20698" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------302C573CB07886B58EA20698 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello , I tried to cross compile the kernel from ftp.embedix.com, meaning that I found that this embedix Linux is made to work on any platform . I have an Atlas board and a QED processsor ( a mips one ) and I fail in trying to cross compile the linux-2.2.13. I get the following errors. /home/nicu/Kituri/Lineo/linux-2.2.13/scripts/mkdep amigaffs.c bitmap.c di /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h:47: invalid operands to binary + /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h: In function `atomic_sub': /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h:57: invalid operands to binary - /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h: In function `atomic_add_return': /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h:67: incompatible types in assignment /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h:69: incompatible types in assignment /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h: In function `atomic_sub_return': /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h:81: incompatible types in assignment /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/atomic.h:83: incompatible types in assignment /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/timex.h: In function `get_cycles': In file included from /home/nicu/Kituri/Lineo/linux-2.2.13/include/linux/timex.h:138, from /home/nicu/Kituri/Lineo/linux-2.2.13/include/linux/sched.h:14, from /home/nicu/Kituri/Lineo/linux-2.2.13/include/linux/mm.h:4, from /home/nicu/Kituri/Lineo/linux-2.2.13/include/linux/slab.h:14, from /home/nicu/Kituri/Lineo/linux-2.2.13/include/linux/malloc.h:4, from /home/nicu/Kituri/Lineo/linux-2.2.13/include/linux/proc_fs.h:5, from init/main.c:15: /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/timex.h:36: warning: implicit declaration of function `read_32bit_cp0_register' /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/timex.h:36: `CP0_COUNT' undeclared (first use this function) /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/timex.h:36: (Each undeclared identifier is reported only once /home/nicu/Kituri/Lineo/linux-2.2.13/include/asm/timex.h:36: for each function it appears in.) make: *** [init/main.o] Error 1 Another weird thing . When I received my Atlas board I gqt a CD with the kernel sources and binaries. I installed the binaries on the Atlas board and it works fine but when I tried to cross compile the kernel I get some stupid errors like the one above. I realy do not understand anything , does anyone cross compiled a kernele for MIPS processors and Atlas boards ? The version is linux 2.2.12.( the Hard Hat Linux ). Thak you for all your help. Regards, Nicu --------------302C573CB07886B58EA20698 Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------302C573CB07886B58EA20698-- From owner-linux-mips@oss.sgi.com Wed Nov 8 01:50:28 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 01:50:18 -0800 Received: from mx.mips.com ([206.31.31.226]:23518 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 01:50:01 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA20575; Wed, 8 Nov 2000 01:49:38 -0800 (PST) Received: from Ulysses (sfr-tgn-sfp-vty3.as.wcom.net [216.192.35.3]) by newman.mips.com (8.9.3/8.9.0) with SMTP id BAA13374; Wed, 8 Nov 2000 01:49:53 -0800 (PST) Message-ID: <004101c04969$b744b160$0323c0d8@Ulysses> From: "Kevin D. Kissell" To: "Nicu Popovici" , References: <3A09753F.DB2457EE@isratech.ro> Subject: Re: MIPS kernel! Date: Wed, 8 Nov 2000 10:53:14 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > I tried to cross compile the kernel from ftp.embedix.com, meaning that > I found that this embedix Linux is made to work on any platform . I have > an Atlas board and a QED processsor ( a mips one ) and I fail in trying > to cross compile the linux-2.2.13. I get the following errors. ... [errors snipped] ... > Another weird thing . When I received my Atlas board I gqt a CD with the > kernel sources and binaries. I installed the binaries on the Atlas board > and it works fine but when I tried to cross compile the kernel I get > some stupid errors like the one above. I realy do not understand > anything , does anyone cross compiled a kernele for MIPS processors and > Atlas boards ? The version is linux 2.2.12.( the Hard Hat Linux ). In general, at MIPS, we generally build native or semi-native (mipsel on mipseb machines and vice versa). In cross-builds of other components, however, I have observed that problems such as those you describe can result from include files on the host platform being erroneously pulled in to the cross-build. Cross-gcc and the makefiles have been known to be set up such that, if the needed include file can be found neither in the explicitly requested directories nor in the cross-compiler's default includes, it will silently search the host /usr/include directories. One quick-and-dirty way to test this would be to temporarily rename /usr/include on your host platform to /usr/include.native or whatever, and then make your /usr/include a symbolic link to the include directory of your MIPS Linux tree. This should either let you build correctly or give you a more useful error message telling you which include file is missing from your cross-environment or MIPS kernel distribution. Just don't forget to put things back the way they were! Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Nov 8 04:58:39 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 04:58:29 -0800 Received: from u-203.karlsruhe.ipdial.viaginterkom.de ([62.180.21.203]:40968 "EHLO u-203.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 04:58:15 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 8 Nov 2000 04:58:04 +0100 Date: Wed, 8 Nov 2000 04:58:04 +0100 From: Ralf Baechle To: Michl Ladislav Cc: linux-mips@oss.sgi.com Subject: Re: setenv eaddr Message-ID: <20001108045804.A12999@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from xmichl03@stud.fee.vutbr.cz on Tue, Nov 07, 2000 at 03:50:28PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 07, 2000 at 03:50:28PM +0100, Michl Ladislav wrote: > I was looking to the archives and HOWTOs to find way how to change eaddr > of sgi Indy (which was incorrectly set after 2.4.0-test6 crash) and find > couple of questions and no answer. I think about -p switch of setenv > mentioned in archives supposing that it means "permanent" and trying to > imagine how to FORCE set eaddr. This is the key. The -p option doesn't work for the eaddr variable. Hey, SGI didn't want it's customers to arbitrarily change serial numbers of the machine ... Ralf From owner-linux-mips@oss.sgi.com Wed Nov 8 04:58:59 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 04:58:39 -0800 Received: from u-203.karlsruhe.ipdial.viaginterkom.de ([62.180.21.203]:40968 "EHLO u-203.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 04:58:16 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 8 Nov 2000 05:01:58 +0100 Date: Wed, 8 Nov 2000 05:01:58 +0100 From: Ralf Baechle To: Ian Chilton Cc: linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org Subject: Re: User/Group Problem Message-ID: <20001108050158.B12999@bacchus.dhis.org> References: <20001107110610.A8074@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001107110610.A8074@woody.ichilton.co.uk>; from mailinglist@ichilton.co.uk on Tue, Nov 07, 2000 at 11:06:10AM +0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 07, 2000 at 11:06:10AM +0000, Ian Chilton wrote: > I am building a Linux system on an SGI I2 (MIPS) with glibc 2.2 > > I am having the following problem....any ideas? > > bash-2.04# chown root test.c > chown: root: invalid user > > bash-2.04# chgrp root test.c > chgrp: invalid group name `root' Two possible reasons: - your /etc/nsswitch.conf is broken - your chown / chgrp binaries are statically linked. In that case nss won't work on MIPS until it's fixed ... Ralf From owner-linux-mips@oss.sgi.com Wed Nov 8 05:53:59 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 05:53:39 -0800 Received: from boco.fee.vutbr.cz ([147.229.9.11]:25106 "EHLO boco.fee.vutbr.cz") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 05:53:24 -0800 Received: from fest.stud.fee.vutbr.cz (fest.stud.fee.vutbr.cz [147.229.9.16]) by boco.fee.vutbr.cz (8.11.1/8.11.1) with ESMTP id eA8DrJf61423 (using TLSv1/SSLv3 with cipher EDH-RSA-DES-CBC3-SHA (168 bits) verified OK); Wed, 8 Nov 2000 14:53:20 +0100 (CET) Received: (from xmichl03@localhost) by fest.stud.fee.vutbr.cz (8.11.0/8.11.0) id eA8DrJr40551; Wed, 8 Nov 2000 14:53:19 +0100 (CET) From: Michl Ladislav Date: Wed, 8 Nov 2000 14:53:19 +0100 (CET) X-processed: pine.send To: Ralf Baechle cc: linux-mips@oss.sgi.com Subject: Re: setenv eaddr In-Reply-To: <20001108045804.A12999@bacchus.dhis.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 8 Nov 2000, Ralf Baechle wrote: > The -p option doesn't work for the eaddr variable. You are right, of course :-) Perhaps you didn't read my post carefully. I was talking about -f option (as shown in example), which definitely works on my indy. > Hey, SGI didn't want it's customers to arbitrarily change serial > numbers of the machine ... Hmm, as I already wrote, after kernel crash I was left with incorectly set eaddr variable and I was unable to boot anything :-< I only set eaddr to its original value by this pretty simple way. So no arbitrarily change, but repair to original state. Regards Lada. From owner-linux-mips@oss.sgi.com Wed Nov 8 06:11:49 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 06:11:39 -0800 Received: from u-203.karlsruhe.ipdial.viaginterkom.de ([62.180.21.203]:49416 "EHLO u-203.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 06:11:10 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 8 Nov 2000 15:10:48 +0100 Date: Wed, 8 Nov 2000 15:10:48 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: MIPS kernel! Message-ID: <20001108151048.A13841@bacchus.dhis.org> References: <3A09753F.DB2457EE@isratech.ro> <004101c04969$b744b160$0323c0d8@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <004101c04969$b744b160$0323c0d8@Ulysses>; from kevink@mips.com on Wed, Nov 08, 2000 at 10:53:14AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 08, 2000 at 10:53:14AM +0100, Kevin D. Kissell wrote: > In general, at MIPS, we generally build native or semi-native > (mipsel on mipseb machines and vice versa). In cross-builds > of other components, however, I have observed that problems > such as those you describe can result from include files > on the host platform being erroneously pulled in to the cross-build. > Cross-gcc and the makefiles have been known to be set up such > that, if the needed include file can be found neither in the explicitly > requested directories nor in the cross-compiler's default includes, > it will silently search the host /usr/include directories. This is either a bug in the version that you're using, a wrongly installed compiled or simply wrong -I directives passed to the compiler. The crosscompiler rpms as distributed on oss will only search: /usr/lib/gcc-lib/mips-linux/egcs-2.91.66/include /usr/mips-linux/include by default. I just tried, egcs-1.1.2-2 also doesn't search silently in other directories. So it's not a problem of gcc itself which leaves the makefiles. If you find any instance of the wrong directories being searched, please tell me. Or better, include a patch :-) Ralf From owner-linux-mips@oss.sgi.com Wed Nov 8 08:37:49 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 08:37:40 -0800 Received: from [194.98.116.10] ([194.98.116.10]:33796 "EHLO hermes.epita.fr") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 08:37:23 -0800 Received: from purple42.epx.epita.fr (purple42.epx.epita.fr [10.225.7.1]) by hermes.epita.fr id RAA20741 for EPITA Paris France Wed, 8 Nov 2000 17:36:22 GMT Received: by purple42.epx.epita.fr (Postfix, from userid 501) id 789622294; Wed, 8 Nov 2000 17:35:53 +0100 (CET) Date: Wed, 8 Nov 2000 17:35:53 +0100 From: Thomas Poindessous To: linux-mips@oss.sgi.com Subject: Re: Decstation 5000/200 Message-ID: <20001108173553.A1305@purple42.epx.epita.fr> References: <20001107162653.A31659@purple42.epx.epita.fr> <20001107213708.G1930@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001107213708.G1930@paradigm.rfc822.org>; from flo@rfc822.org on Tue, Nov 07, 2000 at 09:37:08PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 07, 2000 at 09:37:08PM +0100, Florian Lohoff wrote: > On Tue, Nov 07, 2000 at 04:26:53PM +0100, Thomas Poindessous wrote: > > Hi, > > I have one IBM Decstation 5000/200 (PowerServer). > > I have minicom it but nothing, no garbage, nada. First sorry for the wrong description. It's a digital Decstation 5000/200. > Are you sure you are not on the wrong serial ? > Do you have a Framebuffer and Keyboard attached ? I connect my laplink to serial port #3 The keyboard is unplugged, and I hav test with and without the framebuffer and the scsi controller. This box has three set of ram but no hard drive, is it a problem ? > > Where can I find these errors code ? > > They are in the Decstation Hardware Reference Manual > delivered with the Decstation - I havent got them > handy right now but probably someone could copy > them to a digital form and put it into the > Mips HOWTO. It would be great. > > BTW, is there a port for Mips Magnum R4000 (Big endian) ? > > Hmm - From memory: yes - But i dont think it'll work out of the box > as the have been a lot of kernel changes and nobody cared on the > Mips Magnum Port. Ok, I will test. > Flo > -- > Florian Lohoff flo@rfc822.org +49-5201-669912 > Why is it called "common sense" when nobody seems to have any? > -- Thomas Poindessous EpX asso GNU/Linux de l'Epita epx@epita.fr && http://www.epita.fr/~epx From owner-linux-mips@oss.sgi.com Wed Nov 8 10:58:00 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 10:57:50 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:29453 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 8 Nov 2000 10:57:24 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id BF0FA7CF1; Wed, 8 Nov 2000 18:57:11 +0000 (GMT) Date: Wed, 8 Nov 2000 18:57:11 +0000 From: Ian Chilton To: pete Cc: linux-mips@oss.sgi.com Subject: Re: MIPS linux Message-ID: <20001108185711.A10689@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > and noticed that you do not recommend using the hardhat distro based on You can use it, but it is old and broken. It will get you booted into Linux, but IIRC you can not even compile a kernel :( I am currently putting together some base systems, which you can net-boot and/or copy to a HD. Also, will write an installation guide. Hoping to upload these after the weekend. I started with a Hardhat install, then used the Redhat 6.0 packages from ftp://oss.sgi.com/pub/linux/mips/redhat/test-6.0, but that was not an easy procedure :) Ralf is currently working on a Redhat 7.0 port, and Flo (lolo) has started uploading packages to debian.org Then there is Simple Linux/MIPS, byt Keith...that is available from oss.sgi.com now... So, there is lots in the pipeline, but not a lot to actually go on for end-users right now, more hackers :) All the links should be on the links page at our site... (or the news page). There are pointers to some installation guides.. In the redhat dir on oss, there is a file called instructions, which is the guide I used when I first started out...It describes setting up the network boot server etc... As I say though, I am currently working on an installation guide for my bases (hoping to release a glibc 2.0.6/kernel 2.2.14 one and a kernel 2.4 / glibc 2.2 one, but the 2.2 is still being worked on :) So, i'd say, you can get in there and try some of the stuff downloadable, but if you are in no hurry, hang on for a bit, because there are developments happening... If you are on IRC, join us on irc.openprojects.net, channel #mipslinux (I am GadgetMan), and definatly subscribe to the linux-mips mailinglist on oss.sgi.com Hope this helps a bit! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ian@ichilton.co.uk | |-----------------------------------------------------------------| | Web Site --> http://www.ichilton.co.uk | |-----------------------------------------------------------------| | "Unix is user friendly - it's just picky about it's friends." | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 8 11:25:10 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 11:25:00 -0800 Received: from router.isratech.ro ([193.226.114.69]:20243 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 11:24:43 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA8FKpM32556 for ; Wed, 8 Nov 2000 17:20:52 +0200 Message-ID: <3A09DE18.E55FA70F@isratech.ro> Date: Wed, 08 Nov 2000 18:13:28 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Cross_compiler! Content-Type: multipart/mixed; boundary="------------61302E31229AB9F02790A356" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------61302E31229AB9F02790A356 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello you all, I have a development board ( ATLAS + QED 5261 processor ). Does anyone from you did cross compiled a kernel for mips on a i686 machine ? I am struggling for three weeks now to do that and nothing works. Mr. Weselows said some days ago to get the Linux_2_2 form CVS and indeed I could cross compile that kernel but after that I found out that the kernel does not have support for ATLAS board. I tried the following kernel versions 1. linux.2.2.12 from the Atlas board CD 2. linux 2.2.13 from lineo.com 3. linux 2.2.14 from oss.sgi.com( linux2_2 from CVS site ) 4. linux 2.2.17 Best Regards, Nicu --------------61302E31229AB9F02790A356 Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------61302E31229AB9F02790A356-- From owner-linux-mips@oss.sgi.com Wed Nov 8 11:48:00 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 11:47:50 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:43769 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 11:47:40 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eA8JjP322263; Wed, 8 Nov 2000 11:45:25 -0800 Message-ID: <3A09ADDB.EA2A6246@mvista.com> Date: Wed, 08 Nov 2000 11:47:39 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: Cross_compiler! References: <3A09DE18.E55FA70F@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Nicu Popovici wrote: > > Hello you all, > > I have a development board ( ATLAS + QED 5261 processor ). > > Does anyone from you did cross compiled a kernel for mips on a i686 > machine ? I am struggling for three weeks now to do that and nothing > works. Mr. Weselows said some days ago to get the Linux_2_2 form CVS > and indeed I could cross compile that kernel but after that I found out > that the kernel does not have support for ATLAS board. > > I tried the following kernel versions > 1. linux.2.2.12 from the Atlas board CD > 2. linux 2.2.13 from lineo.com > 3. linux 2.2.14 from oss.sgi.com( linux2_2 from CVS site ) > 4. linux 2.2.17 > > Best Regards, > Nicu Nicu, You can get the cross-compile tool chains from the monta vista ftp site. These tools are considered stable and recommeded - at least before Ralf shows his latest toys. :-0 1. binutils 2.8.1 2. egcs 1.0.3a 3. glibc 2.0.6 The ftp site is ftp.mvsiat.com:/pub/Area51/ddb-5476/ Hopefully before the end of this weekend, there will a little more updated release with a new name prefix, some bug fixes and for both little endiand and big endian. The current one is for little endian. If you know how to use rpm, you can create your own big-endian tools pretty easily. Jun From owner-linux-mips@oss.sgi.com Wed Nov 8 12:03:51 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 12:03:41 -0800 Received: from mx.mips.com ([206.31.31.226]:47589 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 12:03:27 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id MAA25409; Wed, 8 Nov 2000 12:02:53 -0800 (PST) Received: from lsf17.mips.com (lsf17 [192.168.10.205]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id MAA00300; Wed, 8 Nov 2000 12:03:11 -0800 (PST) Received: from mips.com (localhost [127.0.0.1]) by lsf17.mips.com (8.9.3/8.9.0) with ESMTP id MAA16401; Wed, 8 Nov 2000 12:03:11 -0800 (PST) Message-ID: <3A09B17F.7FF3B03B@mips.com> Date: Wed, 08 Nov 2000 12:03:11 -0800 From: "Kevin D. Kissell" Organization: MIPS Technologies Inc. X-Mailer: Mozilla 4.61 [en] (X11; U; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Ian Chilton CC: pete , linux-mips@oss.sgi.com Subject: Re: MIPS linux References: <20001108185711.A10689@woody.ichilton.co.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ian Chilton wrote: > > Hello, > > > and noticed that you do not recommend using the hardhat distro based on > > You can use it, but it is old and broken. It will get you booted into Linux, but IIRC you can not even compile a kernel :( Sure you can! I've done it hundreds of times. ;-) You can even build binutils. But you can't build gcc, and any application that depends on certain subtleties of signal behavior will be betrayed by the discrepancy between the HardHat glibc and the 2.2-3-4 kernels. So I too am eagerly looking forward to a 6.0 or 7.0 based solution - provided that the glibc disconnects are fixed as well. Kevin K. From owner-linux-mips@oss.sgi.com Wed Nov 8 12:05:40 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 12:05:30 -0800 Received: from ns.snowman.net ([63.80.4.34]:31757 "EHLO ns.snowman.net") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 12:05:26 -0800 Received: from localhost (nick@localhost) by ns.snowman.net (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id PAA08083 for ; Wed, 8 Nov 2000 15:05:21 -0500 Date: Wed, 8 Nov 2000 15:05:21 -0500 (EST) From: X-Sender: nick@ns cc: linux-mips@oss.sgi.com Subject: Issues with R8000 In-Reply-To: <3A09ADDB.EA2A6246@mvista.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is not linux specific, but I'm hoping someone will have a suggestion. I recently got an Indigo2 r8000. Anything I hook up to the external chain is flakey. It won't always boot (complains about cable disk or cdrom error), and I get regular scsi timeouts. Does anyone have suggestions how to fix this? Thanks Nick From owner-linux-mips@oss.sgi.com Wed Nov 8 12:07:30 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 12:07:21 -0800 Received: from mx.mips.com ([206.31.31.226]:52197 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 12:07:08 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id MAA25451; Wed, 8 Nov 2000 12:06:45 -0800 (PST) Received: from lsf17.mips.com (lsf17 [192.168.10.205]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id MAA00424; Wed, 8 Nov 2000 12:07:03 -0800 (PST) Received: from mips.com (localhost [127.0.0.1]) by lsf17.mips.com (8.9.3/8.9.0) with ESMTP id MAA16405; Wed, 8 Nov 2000 12:07:04 -0800 (PST) Message-ID: <3A09B268.73303E91@mips.com> Date: Wed, 08 Nov 2000 12:07:04 -0800 From: "Kevin D. Kissell" Organization: MIPS Technologies Inc. X-Mailer: Mozilla 4.61 [en] (X11; U; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: MIPS kernel! References: <3A09753F.DB2457EE@isratech.ro> <004101c04969$b744b160$0323c0d8@Ulysses> <20001108151048.A13841@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > > On Wed, Nov 08, 2000 at 10:53:14AM +0100, Kevin D. Kissell wrote: > > > In general, at MIPS, we generally build native or semi-native > > (mipsel on mipseb machines and vice versa). In cross-builds > > of other components, however, I have observed that problems > > such as those you describe can result from include files > > on the host platform being erroneously pulled in to the cross-build. > > Cross-gcc and the makefiles have been known to be set up such > > that, if the needed include file can be found neither in the explicitly > > requested directories nor in the cross-compiler's default includes, > > it will silently search the host /usr/include directories. > > This is either a bug in the version that you're using, a wrongly installed > compiled or simply wrong -I directives passed to the compiler. Obviously. And my thought was that Nicu may well be being bit by one or the other. > The crosscompiler rpms as distributed on oss will only search: > > /usr/lib/gcc-lib/mips-linux/egcs-2.91.66/include > /usr/mips-linux/include > > by default. I just tried, egcs-1.1.2-2 also doesn't search silently in > other directories. So it's not a problem of gcc itself which leaves the > makefiles. If you find any instance of the wrong directories being > searched, please tell me. Or better, include a patch :-) I saw an instance of this on the order of a year ago. I don't remember which compiler I was using, nor where I got it. I have no ability nor really much desire to try to reconstruct the environment to reproduce the problem! Kevin K. From owner-linux-mips@oss.sgi.com Wed Nov 8 12:12:30 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 12:12:21 -0800 Received: from u-242.karlsruhe.ipdial.viaginterkom.de ([62.180.19.242]:5636 "EHLO u-242.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 12:12:06 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 8 Nov 2000 21:11:55 +0100 Date: Wed, 8 Nov 2000 21:11:55 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Ralf Baechle , Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: MIPS kernel! Message-ID: <20001108211155.B870@bacchus.dhis.org> References: <3A09753F.DB2457EE@isratech.ro> <004101c04969$b744b160$0323c0d8@Ulysses> <20001108151048.A13841@bacchus.dhis.org> <3A09B268.73303E91@mips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A09B268.73303E91@mips.com>; from kevink@mips.com on Wed, Nov 08, 2000 at 12:07:04PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 08, 2000 at 12:07:04PM -0800, Kevin D. Kissell wrote: > > by default. I just tried, egcs-1.1.2-2 also doesn't search silently in > > other directories. So it's not a problem of gcc itself which leaves the > > makefiles. If you find any instance of the wrong directories being > > searched, please tell me. Or better, include a patch :-) > > I saw an instance of this on the order of a year ago. I don't > remember which compiler I was using, nor where I got it. I have > no ability nor really much desire to try to reconstruct the > environment to reproduce the problem! It think you can missconfigure a compiler to do something like that on a i386-linux host by ``configure mips-linux'' or so. That will or course also hose your native compiler. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 8 13:08:51 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 13:08:41 -0800 Received: from orzan.fi.udc.es ([193.144.60.19]:14722 "EHLO orzan.fi.udc.es") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 13:08:21 -0800 Received: from serpe.mitica (mail@vexeta.dc.fi.udc.es [193.144.51.32]) by orzan.fi.udc.es (8.9.3/8.9.1) with ESMTP id WAA18458; Wed, 8 Nov 2000 22:08:02 +0100 (MET) Received: from quintela by serpe.mitica with local (Exim 3.16 #1 (Debian)) id 13taUA-0000IL-00; Wed, 08 Nov 2000 20:02:14 +0100 To: Klaus Naumann , linux-mips@oss.sgi.com Subject: TCP dump trace X-Url: http://carpanta.dc.fi.udc.es/~quintela From: "Juan J. Quintela" Date: 08 Nov 2000 20:02:14 +0100 Message-ID: Lines: 72 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi I am trying to boot an I2. The Indigo 2 needs an ecoff binary for booting (i.e. an ELF image is not good). I have set up tftp and dhcp. Both of them are working ok (at least they are able to boot my Multia without any problem). server machine: serpe.mitica: Linux x86 test10 debian woody Yes, I have done the: echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc client machine: indigo 2: trying to boot sash & kernel in ecoff format (same error). Entries in /var/log/daemon.log Nov 8 19:55:57 serpe dhcpd-2.2.x: BOOTREQUEST from 08:00:69:07:1e:7f via eth0 (non-rfc1048) Nov 8 19:55:57 serpe dhcpd-2.2.x: BOOTREPLY for 192.168.10.13 to meiga (08:00:69:07:1e:7f) via eth0 Nov 8 19:55:58 serpe in.tftpd[1135]: connect from meiga.mitica Nov 8 19:55:58 serpe tftpd[1136]: tftpd: trying to get file: i2.ecoff Nov 8 19:55:58 serpe tftpd[1136]: tftpd: serving file from /home/tftpboot Yes, I wanted to boot the file i2.ecoff in meiga, everything looks ok here. Now the tcpdump -vvv -i eth0 output 19:55:57.852630 arp who-has meiga.mitica tell meiga.mitica 19:55:57.853168 meiga.mitica.bootpc > 255.255.255.255.bootps: xid:0xdee8 secs:5 C:meiga.mitica [|bootp] (ttl 255, id 49) 19:55:57.854112 serpe.mitica.bootps > meiga.mitica.bootpc: xid:0xdee8 secs:5 C:meiga.mitica Y:meiga.mitica S:serpe.mitica [|bootp] [tos 0x10] (ttl 16, id 0) 19:55:57.854888 arp who-has meiga.mitica tell meiga.mitica 19:55:57.934563 meiga.mitica.7913 > serpe.mitica.tftp: 21 RRQ "i2.ecoff" (ttl 255, id 50) 19:55:58.076108 serpe.mitica.32776 > meiga.mitica.7913: udp 516 (ttl 64, id 41004) 19:55:58.077099 meiga.mitica.7913 > serpe.mitica.32776: udp 6 (ttl 255, id 51) 19:55:58.081840 serpe.mitica.32776 > meiga.mitica.7913: udp 516 (ttl 64, id 41260) 19:56:03.069430 arp who-has meiga.mitica tell serpe.mitica 19:56:03.069883 arp reply meiga.mitica is-at 8:0:69:7:1e:7f 19:56:03.079855 serpe.mitica.32776 > meiga.mitica.7913: udp 516 (ttl 64, id 41516) 19:56:08.079263 serpe.mitica.32776 > meiga.mitica.7913: udp 516 (ttl 64, id 41772) 19:56:13.078798 serpe.mitica.32776 > meiga.mitica.7913: udp 516 (ttl 64, id 42028) 19:56:18.078397 serpe.mitica.32776 > meiga.mitica.7913: udp 516 (ttl 64, id 42284) 19:56:27.704048 meiga.mitica.7913 > serpe.mitica.32776: udp 6 (ttl 255, id 52) 19:56:27.704112 serpe.mitica > meiga.mitica: icmp: serpe.mitica udp port 32776 unreachable (DF) [tos 0xc0] (ttl 255, id 0) 19:56:57.706480 meiga.mitica.7913 > serpe.mitica.32776: udp 6 (ttl 255, id 53) 19:56:57.706564 serpe.mitica > meiga.mitica: icmp: serpe.mitica udp port 32776 unreachable (DF) [tos 0xc0] (ttl 255, id 0) 19:57:02.704267 arp who-has meiga.mitica tell serpe.mitica 19:57:02.704708 arp reply meiga.mitica is-at 8:0:69:7:1e:7f 19:57:27.709047 meiga.mitica.7913 > serpe.mitica.32776: udp 6 (ttl 255, id 54) 19:57:27.709140 serpe.mitica > meiga.mitica: icmp: serpe.mitica udp port 32776 unreachable (DF) [tos 0xc0] (ttl 255, id 0) 19:57:57.711458 meiga.mitica.7913 > serpe.mitica.32776: udp 6 (ttl 255, id 55) 19:57:57.711543 serpe.mitica > meiga.mitica: icmp: serpe.mitica udp port 32776 unreachable (DF) [tos 0xc0] (ttl 255, id 0) 19:58:02.709064 arp who-has meiga.mitica tell serpe.mitica 19:58:02.709327 arp reply meiga.mitica is-at 8:0:69:7:1e:7f 19:58:27.808524 meiga.mitica.7913 > serpe.mitica.32776: udp 6 (ttl 255, id 56) 19:58:27.808598 serpe.mitica > meiga.mitica: icmp: serpe.mitica udp port 32776 unreachable (DF) [tos 0xc0] (ttl 255, id 0) Notice that the sender (serpe) sends 3 packets to the i2 (meiga), there is no ack, and after some time, meiga answer to the previous port, and serpe tells meiga that the port is unreachable. Any suggestion??? Later, Juan. -- In theory, practice and theory are the same, but in practice they are different -- Larry McVoy From owner-linux-mips@oss.sgi.com Wed Nov 8 14:27:11 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 14:27:01 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:62769 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 14:26:50 -0800 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id OAA02778 for ; Wed, 8 Nov 2000 14:18:56 -0800 (PST) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id SAA15760; Wed, 8 Nov 2000 18:26:53 -0400 Date: Wed, 8 Nov 2000 18:26:52 -0400 From: "J. Scott Kasten" To: pete@blackhammer.com cc: linux-mips@oss.sgi.com Subject: Re: MIPS linux In-Reply-To: <20001108185711.A10689@woody.ichilton.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Try the simple linux stuff. I had great success with the 0.1 release, and some degree with the 0.2 series (the Death on a Stick releases). On Wed, 8 Nov 2000, Ian Chilton wrote: > Hello, > > > and noticed that you do not recommend using the hardhat distro based on > > You can use it, but it is old and broken. It will get you booted into Linux, but IIRC you can not even compile a kernel :( > From owner-linux-mips@oss.sgi.com Wed Nov 8 23:06:34 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 23:06:24 -0800 Received: from router.isratech.ro ([193.226.114.69]:30738 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 23:06:06 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA974og06131; Thu, 9 Nov 2000 09:04:50 +0200 Message-ID: <3A0ABB53.92D39438@isratech.ro> Date: Thu, 09 Nov 2000 09:57:23 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: MIPS kernel! References: <3A09753F.DB2457EE@isratech.ro> <004101c04969$b744b160$0323c0d8@Ulysses> <20001108151048.A13841@bacchus.dhis.org> <3A09D68C.AF1D5AAA@isratech.ro> <20001108205319.A870@bacchus.dhis.org> Content-Type: multipart/mixed; boundary="------------2FF99F9F47D290EEF8EEBEF6" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------2FF99F9F47D290EEF8EEBEF6 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Ralf Baechle wrote: > On Wed, Nov 08, 2000 at 05:41:16PM -0500, Nicu Popovici wrote: > > > I managed to pass that stage with crosscompiler. > > I managed to make the following thing > > make CROSS_COMPILE=mips-linux- > > > > and I get the follwing error. > > What kernel are you trying to build and where did you download it from? > > Ralf I try to compile the linux 2.2.13 and I got that one from ftp.lineo.com. I also tried to cross compile the linux_2_2 from CVS repository from oss.sgi.com and I managed but that one does not have support for my ATLAS borad and I can not run it on my machine. Regards, Nicu --------------2FF99F9F47D290EEF8EEBEF6 Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------2FF99F9F47D290EEF8EEBEF6-- From owner-linux-mips@oss.sgi.com Wed Nov 8 23:11:43 2000 Received: by oss.sgi.com id ; Wed, 8 Nov 2000 23:11:34 -0800 Received: from router.isratech.ro ([193.226.114.69]:55314 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Wed, 8 Nov 2000 23:11:27 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA97BEg10622 for ; Thu, 9 Nov 2000 09:11:14 +0200 Message-ID: <3A0ABCD5.FA556A09@isratech.ro> Date: Thu, 09 Nov 2000 10:03:49 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: [Fwd: Warning: could not send message for past 4 hours] Content-Type: multipart/mixed; boundary="------------52ED9AC7ABEF626DD11746EC" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------52ED9AC7ABEF626DD11746EC Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit --------------52ED9AC7ABEF626DD11746EC Content-Type: message/rfc822 Content-Transfer-Encoding: 7bit Content-Disposition: inline Return-Path: Received: from localhost (localhost) by router.isratech.ro (8.10.2/8.10.2) id eA8IrUg20360; Wed, 8 Nov 2000 20:53:30 +0200 Date: Wed, 8 Nov 2000 20:53:30 +0200 From: Mail Delivery Subsystem Message-Id: <200011081853.eA8IrUg20360@router.isratech.ro> To: MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="eA8IrUg20360.973709610/router.isratech.ro" Subject: Warning: could not send message for past 4 hours Auto-Submitted: auto-generated (warning-timeout) X-Mozilla-Status2: 00000000 This is a MIME-encapsulated message --eA8IrUg20360.973709610/router.isratech.ro ********************************************** ** THIS IS A WARNING MESSAGE ONLY ** ** YOU DO NOT NEED TO RESEND YOUR MESSAGE ** ********************************************** The original message was received at Wed, 8 Nov 2000 16:48:41 +0200 from calin.cs.tuiasi.ro [193.231.15.163] ----- The following addresses had transient non-fatal errors ----- ----- Transcript of session follows ----- ... Deferred: oss.sgi.com.: No route to host Warning: message still undelivered after 4 hours Will keep trying until message is 5 days old --eA8IrUg20360.973709610/router.isratech.ro Content-Type: message/delivery-status Reporting-MTA: dns; router.isratech.ro Arrival-Date: Wed, 8 Nov 2000 16:48:41 +0200 Final-Recipient: RFC822; ralf@oss.sgi.com Action: delayed Status: 4.4.1 Remote-MTA: DNS; oss.sgi.com Last-Attempt-Date: Wed, 8 Nov 2000 20:53:30 +0200 Will-Retry-Until: Mon, 13 Nov 2000 16:48:41 +0200 --eA8IrUg20360.973709610/router.isratech.ro Content-Type: message/rfc822 Return-Path: Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eA8EmfM31942 for ; Wed, 8 Nov 2000 16:48:41 +0200 Sender: nicu Message-ID: <3A09D68C.AF1D5AAA@isratech.ro> Date: Wed, 08 Nov 2000 17:41:16 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle Subject: Re: MIPS kernel! References: <3A09753F.DB2457EE@isratech.ro> <004101c04969$b744b160$0323c0d8@Ulysses> <20001108151048.A13841@bacchus.dhis.org> Content-Type: multipart/mixed; boundary="------------D4D29154E5C4E1D2C0F29A3E" This is a multi-part message in MIME format. --------------D4D29154E5C4E1D2C0F29A3E Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Ralf Baechle wrote: > On Wed, Nov 08, 2000 at 10:53:14AM +0100, Kevin D. Kissell wrote: > > > In general, at MIPS, we generally build native or semi-native > > (mipsel on mipseb machines and vice versa). In cross-builds > > of other components, however, I have observed that problems > > such as those you describe can result from include files > > on the host platform being erroneously pulled in to the cross-build. > > Cross-gcc and the makefiles have been known to be set up such > > that, if the needed include file can be found neither in the explicitly > > requested directories nor in the cross-compiler's default includes, > > it will silently search the host /usr/include directories. > > This is either a bug in the version that you're using, a wrongly installed > compiled or simply wrong -I directives passed to the compiler. The > crosscompiler rpms as distributed on oss will only search: > > /usr/lib/gcc-lib/mips-linux/egcs-2.91.66/include > /usr/mips-linux/include > > by default. I just tried, egcs-1.1.2-2 also doesn't search silently in > other directories. So it's not a problem of gcc itself which leaves the > makefiles. If you find any instance of the wrong directories being > searched, please tell me. Or better, include a patch :-) > > Ralf Hello Ralf, I managed to pass that stage with crosscompiler. I managed to make the following thing make CROSS_COMPILE=mips-linux- and I get the follwing error. mips-linux-ld -static -G 0 -T arch/mips/ld.script.big -Ttext 0x80100000 arch/mip --start-group \ arch/mips/kernel/kernel.o arch/mips/mm/mm.o kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o arch/mips/fpu_emulator/fpu_emulator.o \ fs/filesystems.a \ net/network.a \ drivers/block/block.a drivers/char/char.a drivers/misc/misc.a drivers/net/net.a drivers/scsi/scsi.a drivers/pci/pci.a \ arch/mips/lib/lib.a /home/nicu/linux/lib/lib.a arch/mips/atlas/kernel/atlaskern.a arch/mips/atlas/prom/atlasprom.a \ --end-group \ -o vmlinux arch/mips/kernel/kernel.o: In function `__compute_return_epc': branch.c(__ksymtab+0x70): undefined reference to `__mips_bh_counter' drivers/net/net.a(8390.o): In function `ei_start_xmit': 8390.c(.text+0x304): undefined reference to `disable_irq_nosync' 8390.c(.text+0x304): relocation truncated to fit: R_MIPS_26 disable_irq_nosync 8390.c(.text+0x3a0): undefined reference to `disable_irq_nosync' 8390.c(.text+0x3a0): relocation truncated to fit: R_MIPS_26 disable_irq_nosync make: *** [vmlinux] Error 1 Best Regards, Nicu --------------D4D29154E5C4E1D2C0F29A3E Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------D4D29154E5C4E1D2C0F29A3E-- --eA8IrUg20360.973709610/router.isratech.ro-- --------------52ED9AC7ABEF626DD11746EC Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------52ED9AC7ABEF626DD11746EC-- From owner-linux-mips@oss.sgi.com Thu Nov 9 00:24:53 2000 Received: by oss.sgi.com id ; Thu, 9 Nov 2000 00:24:34 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:58568 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Thu, 9 Nov 2000 00:24:15 -0800 Received: from scotty.mgnet.de (p3E9ECC1C.dip.t-dialin.net [62.158.204.28]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id JAA06606 for ; Thu, 9 Nov 2000 09:24:12 +0100 (MET) Received: (qmail 7336 invoked from network); 9 Nov 2000 08:24:09 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 9 Nov 2000 08:24:09 -0000 Date: Thu, 9 Nov 2000 09:24:09 +0100 (CET) From: Klaus Naumann To: Nicu Popovici cc: Ralf Baechle , Linux/MIPS list Subject: Re: MIPS kernel! In-Reply-To: <3A0ABB53.92D39438@isratech.ro> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 9 Nov 2000, Nicu Popovici wrote: > I try to compile the linux 2.2.13 and I got that one from ftp.lineo.com. > I also tried to cross compile the linux_2_2 from CVS repository from > oss.sgi.com and I managed but that one does not have support for my > ATLAS borad and I can not run it on my machine. Did you also try 2.4 from oss.sgi.com ? If not you should try it, because IIRC 2.2 doesn't have ATLAS support but 2.4 has. I think I remember seeing a CVS commit which included ATLAS support into 2.4 ... correct me if I'm wrong. HTH, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Thu Nov 9 00:30:53 2000 Received: by oss.sgi.com id ; Thu, 9 Nov 2000 00:30:34 -0800 Received: from mx.mips.com ([206.31.31.226]:42886 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 9 Nov 2000 00:30:27 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id AAA04454; Thu, 9 Nov 2000 00:29:19 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id AAA19433; Thu, 9 Nov 2000 00:29:37 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id JAA12516; Thu, 9 Nov 2000 09:29:30 +0100 (MET) Message-ID: <3A0A606A.CE90B43F@mips.com> Date: Thu, 09 Nov 2000 09:29:30 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Klaus Naumann CC: Nicu Popovici , Ralf Baechle , Linux/MIPS list Subject: Re: MIPS kernel! References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Klaus Naumann wrote: > On Thu, 9 Nov 2000, Nicu Popovici wrote: > > > I try to compile the linux 2.2.13 and I got that one from ftp.lineo.com. > > I also tried to cross compile the linux_2_2 from CVS repository from > > oss.sgi.com and I managed but that one does not have support for my > > ATLAS borad and I can not run it on my machine. > > Did you also try 2.4 from oss.sgi.com ? If not you should try it, > because IIRC 2.2 doesn't have ATLAS support but 2.4 has. > I think I remember seeing a CVS commit which included ATLAS support > into 2.4 ... correct me if I'm wrong. > The current version in the CVS repository doesn't work yet,. I have sent Ralf a set of patches that should make it work, but I don't think he has committed it yet. > > HTH, Klaus > > -- > Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) > Nickname : Spock | Org.: Mad Guys Network > Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) > PGP Key : www.mgnet.de/keys/key_spock.txt -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Nov 9 02:16:14 2000 Received: by oss.sgi.com id ; Thu, 9 Nov 2000 02:15:54 -0800 Received: from mx.mips.com ([206.31.31.226]:33671 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 9 Nov 2000 02:15:27 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id CAA05039 for ; Thu, 9 Nov 2000 02:15:02 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id CAA21641 for ; Thu, 9 Nov 2000 02:15:19 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id LAA16868 for ; Thu, 9 Nov 2000 11:15:13 +0100 (MET) Message-ID: <3A0A7930.BC924ECF@mips.com> Date: Thu, 09 Nov 2000 11:15:12 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Problems with egcs-1.0.3 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I wanted to upgrade my compiler, so I just install the following packages: binutils-2.8.1-4lm.mips.rpm egcs-1.0.3a-10lm.mips.rpm egcs-c++-1.0.3a-10lm.mips.rpm egcs-g77-1.0.3a-10lm.mips.rpm egcs-objc-1.0.3a-10lm.mips.rpm glibc-2.0.6-5lm.mips.rpm glibc-debug-2.0.6-5lm.mips.rpm glibc-devel-2.0.6-5lm.mips.rpm glibc-profile-2.0.6-5lm.mips.rpm But when I try to compile the 2.4.0 kernel it simply hangs forever when I try to compile driver/scsi/scsi_merge.c. As anyone seen this ? /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Thu Nov 9 10:18:20 2000 Received: by oss.sgi.com id ; Thu, 9 Nov 2000 10:18:10 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:58374 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Thu, 9 Nov 2000 10:17:54 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Thu, 09 Nov 2000 13:17:34 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Thu, 9 Nov 2000 13:17:33 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209CA3@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: will this work in an Indy? Date: Thu, 9 Nov 2000 13:15:48 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Internal Transfer Rate (mbits/sec) 44 - 65 External Transfer Rate (mbits/sec) 10 (burst) Spindle Speed (RPM) 5,400 Average Latency (msec) 5.55 Buffer 1024 Kbyte Interface 50 Pin SCSI-2 FAST Bytes Per Track (avg) 42,000-55,440 TPI (Tracks Per Inch) 2,250 Average Access (ms read/write) 11/12 Single Track Seek (ms) 0.9/1.7 Max Full Seek (ms) 23/24 Height: 3.25 in / 82.6 mm Width: 5.75 in / 146.1 mm Depth: 8.0 in / 203 mm Weight: 7.8lb / 3.6 kg Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Thu Nov 9 10:21:10 2000 Received: by oss.sgi.com id ; Thu, 9 Nov 2000 10:20:49 -0800 Received: from gatekeep.ti.com ([192.94.94.61]:16840 "EHLO gatekeep.ti.com") by oss.sgi.com with ESMTP id ; Thu, 9 Nov 2000 10:20:42 -0800 Received: from dlep7.itg.ti.com ([157.170.134.103]) by gatekeep.ti.com (8.11.1/8.11.1) with ESMTP id eA9IKan26298 for ; Thu, 9 Nov 2000 12:20:37 -0600 (CST) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA00390 for ; Thu, 9 Nov 2000 12:20:36 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA00347 for ; Thu, 9 Nov 2000 12:20:35 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.180]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id MAA01290 for ; Thu, 9 Nov 2000 12:20:35 -0600 (CST) Message-ID: <3A0AEAEC.FE3E5152@ti.com> Date: Thu, 09 Nov 2000 11:20:28 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: egcs-1.0.3a-2 mipsel binary? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I am upgrading our Atlas board (mipsel r4kc core) to the 'recommended' tool chain to be able to do some native re-compiles of several userland packages. As far as I have been able to determine the rev's that I am looking for are: binutils-2.8.1-2.mipsel.rpm glibc-2.0.6-5lm.mipsel.rpm and egcs-1.0.3a-2 Does this rev of egcs exist as a binary native install for mipsel anywhere or the web? If not, what tool-chain/library and environment is needed to correctly build it? Seems to be a bit of a chicken and egg problem to me. Is there any particular order that I need to follow to do these updates? -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Thu Nov 9 12:48:40 2000 Received: by oss.sgi.com id ; Thu, 9 Nov 2000 12:48:30 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:24584 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Thu, 9 Nov 2000 12:48:23 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Thu, 09 Nov 2000 15:48:02 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Thu, 9 Nov 2000 15:48:01 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209CAF@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: will this boot Irix? Date: Thu, 9 Nov 2000 15:46:14 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Plextor 4.5X Sparc and "most" (if don't want to say "all") other Unix boxes bootable cdrom in Sun 411 case Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Fri Nov 10 00:05:34 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 00:05:24 -0800 Received: from router.isratech.ro ([193.226.114.69]:9479 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 10 Nov 2000 00:05:05 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eAA81Df12822; Fri, 10 Nov 2000 10:01:14 +0200 Message-ID: <3A0C1820.6D5C615F@isratech.ro> Date: Fri, 10 Nov 2000 10:45:36 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: [Fwd: Warning: could not send message for past 4 hours] References: <3A0ABCD5.FA556A09@isratech.ro> <20001109170119.A3253@bacchus.dhis.org> Content-Type: multipart/mixed; boundary="------------D339CBDB2ED45E993C97B02F" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------D339CBDB2ED45E993C97B02F Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, I am very sorry if I bothered any of you so please excuse me . It will not happen again. Nicu Ralf Baechle wrote: > This was a _warning_ only, no need to resend. > > Ralf --------------D339CBDB2ED45E993C97B02F Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------D339CBDB2ED45E993C97B02F-- From owner-linux-mips@oss.sgi.com Fri Nov 10 01:13:24 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 01:13:04 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:64773 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Fri, 10 Nov 2000 01:12:59 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id 781E97F5; Fri, 10 Nov 2000 10:12:57 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 2FD648F81; Fri, 10 Nov 2000 10:12:06 +0100 (CET) Date: Fri, 10 Nov 2000 10:12:06 +0100 From: Florian Lohoff To: tmaloney@ixl.com Cc: linux-mips@oss.sgi.com Subject: Re: will this work in an Indy? Message-ID: <20001110101206.A3273@paradigm.rfc822.org> References: <0A5319EEAF65D411825E00805FBBD8A1209CA3@exchange.clt.ixl.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <0A5319EEAF65D411825E00805FBBD8A1209CA3@exchange.clt.ixl.com>; from tmaloney@ixl.com on Thu, Nov 09, 2000 at 01:15:48PM -0500 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 09, 2000 at 01:15:48PM -0500, tmaloney@ixl.com wrote: > Internal Transfer Rate (mbits/sec) 44 - 65 External Transfer Rate > (mbits/sec) 10 (burst) Spindle Speed (RPM) 5,400 Average Latency (msec) 5.55 > Buffer 1024 Kbyte Interface 50 Pin SCSI-2 FAST Bytes Per Track (avg) > 42,000-55,440 TPI (Tracks Per Inch) 2,250 Average Access (ms read/write) > 11/12 Single Track Seek (ms) 0.9/1.7 Max Full Seek (ms) 23/24 > Height: 3.25 in / 82.6 mm Width: 5.75 in / 146.1 mm Depth: 8.0 in / 203 mm > Weight: 7.8lb / 3.6 kg > > I am getting a bit annoyed by the "Will this work in ..." - This is definitly not something which should be discusses in here (Although small amounts of Off-Topic mails will be tolerated) ... Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Fri Nov 10 02:34:24 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 02:34:14 -0800 Received: from router.isratech.ro ([193.226.114.69]:7185 "EHLO router.isratech.ro") by oss.sgi.com with ESMTP id ; Fri, 10 Nov 2000 02:34:00 -0800 Received: from isratech.ro (calin.cs.tuiasi.ro [193.231.15.163]) by router.isratech.ro (8.10.2/8.10.2) with ESMTP id eAAAXMf30348; Fri, 10 Nov 2000 12:33:25 +0200 Message-ID: <3A0C3DAB.7481EECE@isratech.ro> Date: Fri, 10 Nov 2000 13:25:48 -0500 From: Nicu Popovici X-Mailer: Mozilla 4.74 [en] (X11; U; Linux 2.2.15-2.5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com, carstenl@mips.com Subject: Atlas support. Content-Type: multipart/mixed; boundary="------------AA990F358F198CF551CEF681" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------AA990F358F198CF551CEF681 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello Carsten, I so in the linux 2.2.12 on the Atlas board that you added support for this board in this kernel. What I need now is kernel2.2.14 for ATLAS boards. What should I do in order to have such a thing ? I did the following : 1. I modified the Config.in from /linux2.2.14/arch/mips with the lines from 2.2.12 regarding ATLAS board. The same I did with the Makefile from the same directory. 2. copied the atlas directory from 2.2.12 into arch/mips/atlas on the 2.2.14 kernel and also the linux/include/asm/atlas/ from 2.2.12 into 2.2.14 directory . And now I did the following : make menuconfig and appeared the Mips Atlaas Board make dep ( I dod not know if this is correct ) and make CROSS_COMPILE=mips-linux-.But I got the following errors: In file included from /usr/mips-linux/include/linux/sched.h:15, from setup.c:30: /usr/mips-linux/include/linux/timex.h:159: field `time' has incomplete type In file included from /usr/mips-linux/include/linux/sched.h:18, from setup.c:30: /usr/mips-linux/include/asm/semaphore.h:30: parse error before `wait_queue_head_ t' /usr/mips-linux/include/asm/semaphore.h:30: warning: no semicolon at end of stru ct or union /usr/mips-linux/include/asm/semaphore.h:34: warning: empty declaration /usr/mips-linux/include/asm/semaphore.h: In function `sema_init': /usr/mips-linux/include/asm/semaphore.h:64: dereferencing pointer to incompletetype /usr/mips-linux/include/asm/semaphore.h:65: dereferencing pointer to incompletetype /usr/mips-linux/include/asm/semaphore.h:66: dereferencing pointer to incompletetype /usr/mips-linux/include/asm/semaphore.h: In function `down': /usr/mips-linux/include/asm/semaphore.h:92: dereferencing pointer to incompletetype /usr/mips-linux/include/asm/semaphore.h: In function `down_interruptible': /usr/mips-linux/include/asm/semaphore.h:103: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h: In function `down_trylock': /usr/mips-linux/include/asm/semaphore.h:113: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h: In function `up': /usr/mips-linux/include/asm/semaphore.h:188: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h: At top level: /usr/mips-linux/include/asm/semaphore.h:219: parse error before `wait_queue_head _t' /usr/mips-linux/include/asm/semaphore.h:219: warning: no semicolon at end of str uct or union /usr/mips-linux/include/asm/semaphore.h:220: warning: data definition has no typ e or storage class /usr/mips-linux/include/asm/semaphore.h: In function `init_rwsem': /usr/mips-linux/include/asm/semaphore.h:252: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h:253: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h:254: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h:255: dereferencing pointer to incomplete type /usr/mips-linux/include/asm/semaphore.h: In function `down_read': In file included from /usr/mips-linux/include/linux/sched.h:76, from setup.c:30: /usr/mips-linux/include/linux/timer.h:21: field `list' has incomplete type setup.c:59: storage class specified for parameter `atlas_irq_setup' setup.c:75: redefinition of `__initfunc' setup.c:60: `__initfunc' previously defined here setup.c: In function `__initfunc': setup.c:86: `atlas_irq_setup' undeclared (first use this function) setup.c:86: (Each undeclared identifier is reported only once setup.c:86: for each function it appears in.) setup.c:135: `mips_cpu' undeclared (first use this function) setup.c:135: `MIPS_CPU_FPU' undeclared (first use this function) setup.c:137: `pci_ops' undeclared (first use this function) [WIFEXITED(s) && WEXITSTATUS(s) == 33], 0, NULL) = 5696 --- SIGCHLD (Child exited) --- stat("/tmp/cc2u8Czo.s", {st_mode=S_IFREG|0644, st_size=1823, ...}) = 0 unlink("/tmp/cc2u8Czo.s") = 0 stat("/tmp/cc2u8Czo.i", {st_mode=S_IFREG|0644, st_size=61912, ...}) = 0 unlink("/tmp/cc2u8Czo.i") = 0 _exit(1) = ? [root@ares kernel]# this is an output from a strace make CROSS_COMPILE=mips-linux- Maybe there is a patch for what I need , maybe some will help me . Thanks in advance Regards, Nicu --------------AA990F358F198CF551CEF681 Content-Type: text/x-vcard; charset=us-ascii; name="octavp.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Nicu Popovici Content-Disposition: attachment; filename="octavp.vcf" begin:vcard n:POPOVICI;Nicolae Octavian tel;cell:+40 93 605020 x-mozilla-html:FALSE org:SC Silicon Service SRL;Software adr:;;;;;; version:2.1 email;internet:octavp@isratech.ro title:Software engineer x-mozilla-cpt:;0 fn:Nicolae Octavian POPOVICI end:vcard --------------AA990F358F198CF551CEF681-- From owner-linux-mips@oss.sgi.com Fri Nov 10 03:57:34 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 03:57:14 -0800 Received: from mx.mips.com ([206.31.31.226]:42653 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 10 Nov 2000 03:56:54 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id DAA17136; Fri, 10 Nov 2000 03:56:19 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id DAA02515; Fri, 10 Nov 2000 03:56:38 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id MAA28191; Fri, 10 Nov 2000 12:56:31 +0100 (MET) Message-ID: <3A0BE26E.77137E0E@mips.com> Date: Fri, 10 Nov 2000 12:56:30 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.6 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: Nicu Popovici CC: linux-mips@oss.sgi.com Subject: Re: Atlas support. References: <3A0C3DAB.7481EECE@isratech.ro> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing If you don't know what you are doing it is not that simple to get Atlas support in the 2.2.14 kernel. It will probably take me a couple of days, but I'm afraid I don't have the time. Right now I'm in the progress of integrating our 2.2.12 work into the 2.4.0 kernel. I have already sent Ralf a patch, so one can run the 2.4.0 kernel on the Atlas board with a QED, but I don't think he had committed it yet. I hope to have a new patch with FP emulator integrated for the 2.4.0 kernel ready in next week, if time permits it. /Carsten Nicu Popovici wrote: > Hello Carsten, > > I so in the linux 2.2.12 on the Atlas board that you added support for > this board in this kernel. What I need now is kernel2.2.14 for ATLAS > boards. What should I do in order to have such a thing ? > I did the following : > 1. I modified the Config.in from /linux2.2.14/arch/mips with the lines > from 2.2.12 regarding ATLAS board. The same I did with the Makefile from > the same directory. > 2. copied the atlas directory from 2.2.12 into arch/mips/atlas on the > 2.2.14 kernel and also the linux/include/asm/atlas/ from 2.2.12 into > 2.2.14 directory . > And now I did the following : make menuconfig and appeared the Mips > Atlaas Board > make dep ( I dod not know if this is correct ) and make > CROSS_COMPILE=mips-linux-.But I got the following errors: > In file included from /usr/mips-linux/include/linux/sched.h:15, > from setup.c:30: > /usr/mips-linux/include/linux/timex.h:159: field `time' has incomplete > type > In file included from /usr/mips-linux/include/linux/sched.h:18, > from setup.c:30: > /usr/mips-linux/include/asm/semaphore.h:30: parse error before > `wait_queue_head_ > t' > /usr/mips-linux/include/asm/semaphore.h:30: warning: no semicolon at end > of stru > ct or union > /usr/mips-linux/include/asm/semaphore.h:34: warning: empty declaration > /usr/mips-linux/include/asm/semaphore.h: In function `sema_init': > /usr/mips-linux/include/asm/semaphore.h:64: dereferencing pointer to > incompletetype > /usr/mips-linux/include/asm/semaphore.h:65: dereferencing pointer to > incompletetype > /usr/mips-linux/include/asm/semaphore.h:66: dereferencing pointer to > incompletetype > /usr/mips-linux/include/asm/semaphore.h: In function `down': > /usr/mips-linux/include/asm/semaphore.h:92: dereferencing pointer to > incompletetype > /usr/mips-linux/include/asm/semaphore.h: In function > `down_interruptible': > /usr/mips-linux/include/asm/semaphore.h:103: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h: In function `down_trylock': > /usr/mips-linux/include/asm/semaphore.h:113: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h: In function `up': > /usr/mips-linux/include/asm/semaphore.h:188: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h: At top level: > /usr/mips-linux/include/asm/semaphore.h:219: parse error before > `wait_queue_head > _t' > /usr/mips-linux/include/asm/semaphore.h:219: warning: no semicolon at > end of str > uct or union > /usr/mips-linux/include/asm/semaphore.h:220: warning: data definition > has no typ > e or storage class > /usr/mips-linux/include/asm/semaphore.h: In function `init_rwsem': > /usr/mips-linux/include/asm/semaphore.h:252: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h:253: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h:254: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h:255: dereferencing pointer to > incomplete > type > /usr/mips-linux/include/asm/semaphore.h: In function `down_read': > In file included from /usr/mips-linux/include/linux/sched.h:76, > from setup.c:30: > /usr/mips-linux/include/linux/timer.h:21: field `list' has incomplete > type > setup.c:59: storage class specified for parameter `atlas_irq_setup' > setup.c:75: redefinition of `__initfunc' > setup.c:60: `__initfunc' previously defined here > setup.c: In function `__initfunc': > setup.c:86: `atlas_irq_setup' undeclared (first use this function) > setup.c:86: (Each undeclared identifier is reported only once > setup.c:86: for each function it appears in.) > setup.c:135: `mips_cpu' undeclared (first use this function) > setup.c:135: `MIPS_CPU_FPU' undeclared (first use this function) > setup.c:137: `pci_ops' undeclared (first use this function) > [WIFEXITED(s) && WEXITSTATUS(s) == 33], 0, NULL) = 5696 > --- SIGCHLD (Child exited) --- > stat("/tmp/cc2u8Czo.s", {st_mode=S_IFREG|0644, st_size=1823, ...}) = 0 > unlink("/tmp/cc2u8Czo.s") = 0 > stat("/tmp/cc2u8Czo.i", {st_mode=S_IFREG|0644, st_size=61912, ...}) = 0 > unlink("/tmp/cc2u8Czo.i") = 0 > _exit(1) = ? > [root@ares kernel]# > > this is an output from a strace make CROSS_COMPILE=mips-linux- > > Maybe there is a patch for what I need , maybe some will help me . > Thanks in advance > Regards, > Nicu -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Fri Nov 10 08:32:17 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 08:32:08 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:31797 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 10 Nov 2000 08:31:46 -0800 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id IAA29671 for ; Fri, 10 Nov 2000 08:23:54 -0800 (PST) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id MAA20160 for ; Fri, 10 Nov 2000 12:32:12 -0400 Date: Fri, 10 Nov 2000 12:32:11 -0400 From: "J. Scott Kasten" To: linux-mips@oss.sgi.com Subject: Re: will this work in an Indy? In-Reply-To: <20001110101206.A3273@paradigm.rfc822.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I suppose then that you have some constructive comments on where that fellow should go to ask such questions??? I for one have been answering him off line to keep the traffic down because the questions fell into the general knowledge category, but newbies have to learn somewhere... On Fri, 10 Nov 2000, Florian Lohoff wrote: > I am getting a bit annoyed by the "Will this work in ..." - This is definitly > not something which should be discusses in here (Although small amounts > of Off-Topic mails will be tolerated) ... > > Flo > -- > Florian Lohoff flo@rfc822.org +49-5201-669912 > Why is it called "common sense" when nobody seems to have any? > > From owner-linux-mips@oss.sgi.com Fri Nov 10 09:53:38 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 09:53:18 -0800 Received: from noose.gt.owl.de ([62.52.19.4]:22291 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Fri, 10 Nov 2000 09:53:11 -0800 Received: by noose.gt.owl.de (Postfix, from userid 10) id BA84C7DD; Fri, 10 Nov 2000 18:53:08 +0100 (CET) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 4F6AB8F81; Fri, 10 Nov 2000 18:52:59 +0100 (CET) Date: Fri, 10 Nov 2000 18:52:59 +0100 From: Florian Lohoff To: "J. Scott Kasten" Cc: linux-mips@oss.sgi.com Subject: Re: will this work in an Indy? Message-ID: <20001110185259.A721@paradigm.rfc822.org> References: <20001110101206.A3273@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from jsk@tetracon-eng.net on Fri, Nov 10, 2000 at 12:32:11PM -0400 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Nov 10, 2000 at 12:32:11PM -0400, J. Scott Kasten wrote: > > I suppose then that you have some constructive comments on where that > fellow should go to ask such questions??? I for one have been answering Asking the same question over and over again is very anoying - A couple of people have answered already that ANY SCSI Drive/CD-Rom will do fine but it doesnt seem to reach the originator. There have been lists concerning all aspects of SGI Systems which should be called sgi-managers IIRC. This list is called "linux-mips" and from my opinion it deals with the aspects of the Mips Port of Linux. And i dont think that SCSI questions fall into that category. As i already said - I am not annoyed by single Off-Topic mails but repeated questions (read: forwarding of sell advertisements) is not really something concerning the topic. > him off line to keep the traffic down because the questions fell into the > general knowledge category, but newbies have to learn somewhere... Learn about what ? Asking any Question Anywhere ? http://www.ietf.org/rfc/rfc1855.txt Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 Why is it called "common sense" when nobody seems to have any? From owner-linux-mips@oss.sgi.com Fri Nov 10 11:18:28 2000 Received: by oss.sgi.com id ; Fri, 10 Nov 2000 11:18:19 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:41463 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Fri, 10 Nov 2000 11:17:53 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eAAJFh320092; Fri, 10 Nov 2000 11:15:43 -0800 Message-ID: <3A0C49EA.1E6C79CC@mvista.com> Date: Fri, 10 Nov 2000 11:18:02 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: PROPOSAL : machine dependent support Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing More and more mips boards are popping and most of them have PCI bus. I was looking at having a common PCI code under arch/mips/kernel which will do the same job which each machine is handling all by itself now. It will invoke various machine dependent calls to accomplish the same job. Following the MIPS tradition, it seems appropriate to introduce some struct like mach_pci_ops. But I think I have a better idea. :-) So far we already have several variables and data structures in the similar nature. (See a complete listing below). Why don't we lump them all together into one centralized structure? OK, I have to be honest - I steal this idea from PPC. PPC folks have gone through some what similar phase when they tried to support ever increasing number of boards in the past two years. The machine dependent structure is part of their solution. I see several benefits : 1. I expect more machine/board abstraction down the road. Other PCI, things may include pwoer management, generic I/O interface, accessing non-volatile storage for system, interrupt management, etc. This structure gives a systematic to include those support, rather than each time investing some ad hoc stuff. 2. Easier to port Linux to a new board. One central place with most of the required functions and variables. (It almost becomes a porting layer - I said "almost". :-0) With good and extensive document, I see the header file is the starting point for anybody who wants to start porting linux to a new board. 3. It makes the mips-common code easier to write - so my common PCI code can be added more easily. Ok, enough bluffing. Specifically, I think I will start with a modest structure (read as "least amount of work" :-0) struct mips_mach_depend { /* _machine_xxx stuff */ void (*restart)(char *cmd); void (*power_off)(void); void (*halt)(void); /* board_time_init */ void (*time_init)(struct irqaction *irq); void (*irq_setup)(void); /* mips_io_port_base */ unsigned long io_port_base; }; extern mips_mach_depend mips_md; I suppose rtc_ops and kbd_ops should be included there as well. I will add PCI stuff to it later. Note that some functions can be NULL, and the mips-generic code will supply default behavior. For example, if power_off is not supplied, it will probably just do a printk, cli() and loop forever. What do you think? I will volunteer to do the first phase change for ALL existing boards so that nothing breaks. Jun P.S., I forgot to mention that one HUGE assumption behind this is that I believe we are going to see 20 to 100 MIPS boards (including SOC, "pseudo-MIPS', etc) in the coming a couple of years which want to use Linux. Certainly anything in this direction will help the proliferation of Linux MIPS - unless someone think this would make Linux too easy to port and they would lose the job. :-) But we always have the option to introduce bugs.... From owner-linux-mips@oss.sgi.com Sat Nov 11 06:48:05 2000 Received: by oss.sgi.com id ; Sat, 11 Nov 2000 06:47:46 -0800 Received: from air.lug-owl.de ([62.52.24.190]:271 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sat, 11 Nov 2000 06:47:30 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 02E91826A; Sat, 11 Nov 2000 15:47:22 +0100 (CET) Date: Sat, 11 Nov 2000 15:47:22 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Boot Problem on DS 5000/240 Message-ID: <20001111154721.B9307@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="DKU6Jbt7q3WqK7+M" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --DKU6Jbt7q3WqK7+M Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi! I've got some problem booting another DECStation I've got: =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D= =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D KN03-AA V5.1b 3/misc/kbd ?STF (4: Ln#0 Kbd self test) 3/misc/mouse ?STF (4: Ln#1 Pntr self test) >>cnfg 3: KN03-AA DEC V5.1b TCF0 ( 32 MB) (enet: 08-00-2b-2f-07-27) (SCSI =3D 7) >>boot 3/tftp ??? ? PC: 0x80021fe4 ? CR: 0x30000010 ? SR: 0x30080000 ? VA: 0xa000ef3a >> =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D= =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D The box doesn't actually send anything down te wire... Can anybody help me with the dump above? MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --DKU6Jbt7q3WqK7+M Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjoNW/kACgkQHb1edYOZ4buenQCfRZanTAUspRzDJXnzIWdDg9+n qQ8An02UfqqcPvHb/frCFaAgX0vEm1+X =4XjQ -----END PGP SIGNATURE----- --DKU6Jbt7q3WqK7+M-- From owner-linux-mips@oss.sgi.com Sun Nov 12 09:03:20 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 09:03:11 -0800 Received: from [62.145.23.107] ([62.145.23.107]:21369 "HELO fileserv2.Cologne.DE") by oss.sgi.com with SMTP id ; Sun, 12 Nov 2000 09:02:45 -0800 Received: from localhost (1347 bytes) by fileserv2.Cologne.DE via rmail with P:stdio/R:bind/T:smtp (sender: ) (ident using unix) id for ; Sun, 12 Nov 2000 18:02:37 +0100 (CET) (Smail-3.2.0.101 1997-Dec-17 #5 built 1998-Jan-19) Received: (from karsten@localhost) by excalibur.cologne.de (8.9.3/8.8.7) id RAA02817; Sun, 12 Nov 2000 17:58:59 +0100 Message-ID: <20001112175843.A1201@excalibur.cologne.de> Date: Sun, 12 Nov 2000 17:58:43 +0100 From: Karsten Merker To: linux-mips@oss.sgi.com Subject: Re: Boot Problem on DS 5000/240 Mail-Followup-To: linux-mips@oss.sgi.com References: <20001111154721.B9307@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.91i In-Reply-To: <20001111154721.B9307@lug-owl.de>; from Jan-Benedict Glaw on Sat, Nov 11, 2000 at 03:47:22PM +0100 X-No-Archive: yes Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Nov 11, 2000 at 03:47:22PM +0100, Jan-Benedict Glaw wrote: > I've got some problem booting another DECStation I've got: > > = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = > KN03-AA V5.1b ^^^^^ This firmware release has no working tftp support. Boot via MOP, mopd-sources are available at http://decstation.unix-ag.org/. HTH, Karsten -- #include Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung. From owner-linux-mips@oss.sgi.com Sun Nov 12 11:57:15 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 11:57:04 -0800 Received: from air.lug-owl.de ([62.52.24.190]:11281 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sun, 12 Nov 2000 11:56:49 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id AE96D826A; Sun, 12 Nov 2000 20:56:46 +0100 (CET) Date: Sun, 12 Nov 2000 20:56:46 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Re: Boot Problem on DS 5000/240 Message-ID: <20001112205645.B26606@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com References: <20001111154721.B9307@lug-owl.de> <20001112175843.A1201@excalibur.cologne.de> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="4bRzO86E/ozDv8r1" Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001112175843.A1201@excalibur.cologne.de>; from karsten@excalibur.cologne.de on Sun, Nov 12, 2000 at 05:58:43PM +0100 X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --4bRzO86E/ozDv8r1 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Nov 12, 2000 at 05:58:43PM +0100, Karsten Merker wrote: > On Sat, Nov 11, 2000 at 03:47:22PM +0100, Jan-Benedict Glaw wrote: >=20 > > I've got some problem booting another DECStation I've got: > >=20 > > =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D= =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D > > KN03-AA V5.1b > ^^^^^ > This firmware release has no working tftp support. Boot via MOP, Nov 12 19:38:12 bootserver mop_srvr[21803]: Client 08:00:2b:2f:69:0a: has u= nknown device type 0x76 Has anybody get correct values for mop_srvr.c? struct client_data clnt_data[]=3D{ { "PMAX" , 0x43, 0x80700000, 1024 }, { "MVAX_II" , 0x05, 0x00000000, 1004 }, { "" , 0x00, 0x00000000, 0 } }; ^^^^ ??? MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --4bRzO86E/ozDv8r1 Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjoO9f0ACgkQHb1edYOZ4bs0JwCfXPXpVNPHVEuu1tXXvKh1R+Of lx8AoInRLlY/0rM16xXMrkvdyLT//lqU =wbv6 -----END PGP SIGNATURE----- --4bRzO86E/ozDv8r1-- From owner-linux-mips@oss.sgi.com Sun Nov 12 12:01:13 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 12:00:54 -0800 Received: from air.lug-owl.de ([62.52.24.190]:11537 "HELO air.lug-owl.de") by oss.sgi.com with SMTP id ; Sun, 12 Nov 2000 12:00:52 -0800 Received: by air.lug-owl.de (Postfix, from userid 1000) id 06133826A; Sun, 12 Nov 2000 21:00:49 +0100 (CET) Date: Sun, 12 Nov 2000 21:00:49 +0100 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Subject: Build failure for R3000 DECstation Message-ID: <20001112210049.C26606@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="Qbvjkv9qwOGw/5Fx" Content-Disposition: inline User-Agent: Mutt/1.2.5i X-Operating-System: Linux air 2.4.0-test8-pre1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --Qbvjkv9qwOGw/5Fx Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi! I see this build failure: mipsel-linux-gcc -D__KERNEL__ -I/usr/src/mipsel/linux/include -Wall -Wstric= t-prototypes -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -mcpu=3Dr= 3000 -mips1 -pipe -c -o sysmips.o sysmips.c sysmips.c: In function `sys_sysmips': sysmips.c:109: warning: implicit declaration of function `syscall_trace' {standard input}: Assembler messages: {standard input}:337: Error: opcode requires -mips2 or greater `ll' {standard input}:339: Error: opcode requires -mips2 or greater `sc' {standard input}:340: Error: opcode requires -mips2 or greater `beqzl' {standard input}:341: Error: opcode requires -mips2 or greater `ll' make[1]: *** [sysmips.o] Error 1 jbglaw@bootserver:/usr/src/mipsel/linux/arch/mips/kernel$ mipsel-linux-gcc = -v Reading specs from /usr/lib/gcc-lib/mipsel-linux/egcs-2.90.29/specs gcc version egcs-2.90.29 980515 (egcs-1.0.3 release) MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --Qbvjkv9qwOGw/5Fx Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.2 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEARECAAYFAjoO9vEACgkQHb1edYOZ4bs4tgCbBACk+hXQGJtovwyapHVUCh/4 vFwAoIky6Q3+Ffh/ZkwTNN/taHY0Vu6p =b1Cv -----END PGP SIGNATURE----- --Qbvjkv9qwOGw/5Fx-- From owner-linux-mips@oss.sgi.com Sun Nov 12 12:11:43 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 12:11:33 -0800 Received: from u-69.karlsruhe.ipdial.viaginterkom.de ([62.180.19.69]:24840 "EHLO u-69.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 12 Nov 2000 12:11:15 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 12 Nov 2000 21:10:57 +0100 Date: Sun, 12 Nov 2000 21:10:57 +0100 From: Ralf Baechle To: Jun Sun Cc: Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: Cross_compiler! Message-ID: <20001112211057.E15594@bacchus.dhis.org> References: <3A09DE18.E55FA70F@isratech.ro> <3A09ADDB.EA2A6246@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A09ADDB.EA2A6246@mvista.com>; from jsun@mvista.com on Wed, Nov 08, 2000 at 11:47:39AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 08, 2000 at 11:47:39AM -0800, Jun Sun wrote: > You can get the cross-compile tool chains from the monta vista ftp > site. These tools are considered stable and recommeded - at least > before Ralf shows his latest toys. :-0 > 2. egcs 1.0.3a Sorry to ruin your weekend but I've alredy put egcs-1.1.2 on oss two days before your posting :-) Ralf From owner-linux-mips@oss.sgi.com Sun Nov 12 13:37:34 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 13:37:24 -0800 Received: from bender.bawue.de ([193.197.13.1]:41999 "HELO bender.bawue.de") by oss.sgi.com with SMTP id ; Sun, 12 Nov 2000 13:37:00 -0800 Received: from void.s.bawue.de (virtual2.lb.bawue.de [193.197.8.130]) by bender.bawue.de (Postfix) with ESMTP id 002DA82B for ; Sun, 12 Nov 2000 22:36:56 +0100 (CET) Received: from florian by void.s.bawue.de with local (Exim 3.16 #1 (Debian)) id 13v3My-0000TA-00; Sun, 12 Nov 2000 21:04:52 +0100 Date: Sun, 12 Nov 2000 21:04:52 +0100 To: linux-mips@oss.sgi.com Subject: Re: will this work in an Indy? Message-ID: <20001112210451.A1799@void.s.bawue.de> Mail-Followup-To: Florian Laws , linux-mips@oss.sgi.com References: <20001110101206.A3273@paradigm.rfc822.org> <20001110185259.A721@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001110185259.A721@paradigm.rfc822.org>; from flo@rfc822.org on Fri, Nov 10, 2000 at 06:52:59PM +0100 From: Florian Laws Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Nov 10, 2000 at 06:52:59PM +0100, Florian Lohoff wrote: > On Fri, Nov 10, 2000 at 12:32:11PM -0400, J. Scott Kasten wrote: > > > > I suppose then that you have some constructive comments on where that > > fellow should go to ask such questions??? I for one have been answering > > Asking the same question over and over again is very anoying - A couple > of people have answered already that ANY SCSI Drive/CD-Rom will do fine > but it doesnt seem to reach the originator. > > There have been lists concerning all aspects of SGI Systems > which should be called sgi-managers IIRC. The newsgroup comp.sys.sgi.hardware should be appropraite, too. Florian From owner-linux-mips@oss.sgi.com Sun Nov 12 18:48:46 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 18:48:27 -0800 Received: from [159.226.39.1] ([159.226.39.1]:56077 "HELO ns.ict.ac.cn") by oss.sgi.com with SMTP id ; Sun, 12 Nov 2000 18:48:03 -0800 Received: (qmail 26586 invoked from network); 13 Nov 2000 02:43:02 -0000 Received: from unknown (HELO bjzheng) (159.226.39.167) by ns.ict.ac.cn with SMTP; 13 Nov 2000 02:43:02 -0000 Message-ID: <002801c04d1b$c1adc320$a727e29f@ict.ac.cn> From: "Zheng Baojian" To: Subject: Can you help me? Date: Mon, 13 Nov 2000 10:45:17 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0025_01C04D5E.CFC1C0E0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2314.1300 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_0025_01C04D5E.CFC1C0E0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SGVsbG86DQogICAgIEknbSBhIENoaW5lc2Ugc3R1ZGVudCxpIHdhbnQgdG8gcnVuIGxpbnV4IG9u IFNHSSBPMiB3b3Jrc3RhdGlvbi4NCkkgc2VlIHRoYXQgTzIgbm90IHN1cHBvcnQgbGludXggbm93 IG9uIHlvdXIgd2ViLGNhbiB5b3UgdGVsbCBtZSB0aGUNCnJlYXNvbj9BcyBzZXJpZXMgb2YgU0dJ IHdvcmtzdGF0aW9ucyxPMixJbmR5LE9ueXggLE9yaWdpbix0aGV5IGhhdmUgc2FtZQ0KYXJjaGl0 ZWN0dXJlLHNhbWUgY3B1LHdoeSBvdGhlcnMgc3VwcG9ydCBsaW51eCxPMiBub3Qgc3VwcG9ydC4N CiAgICAgICAgQmVzdCByZWdhcmRzLg0KQmp6aGVuZw0K ------=_NextPart_000_0025_01C04D5E.CFC1C0E0 Content-Type: text/html; charset="gb2312" Content-Transfer-Encoding: base64 PCFET0NUWVBFIEhUTUwgUFVCTElDICItLy9XM0MvL0RURCBIVE1MIDQuMCBUcmFuc2l0aW9uYWwv L0VOIj4NCjxIVE1MPjxIRUFEPg0KPE1FVEEgY29udGVudD0idGV4dC9odG1sOyBjaGFyc2V0PWdi MjMxMiIgaHR0cC1lcXVpdj1Db250ZW50LVR5cGU+DQo8TUVUQSBjb250ZW50PSJNU0hUTUwgNS4w MC4yMzE0LjEwMDAiIG5hbWU9R0VORVJBVE9SPg0KPFNUWUxFPjwvU1RZTEU+DQo8L0hFQUQ+DQo8 Qk9EWSBiZ0NvbG9yPSNjMGMwYzA+DQo8RElWPjxGT05UIHNpemU9Mj4NCjxESVY+PEZPTlQgc2l6 ZT0yPkhlbGxvOjwvRk9OVD48L0RJVj4NCjxESVY+PEZPTlQgc2l6ZT0yPiZuYnNwOyZuYnNwOyZu YnNwOyZuYnNwOyZuYnNwO0knbSBhIENoaW5lc2Ugc3R1ZGVudCxpIHdhbnQgdG8gDQpydW4gbGlu dXggb24gU0dJIE8yIHdvcmtzdGF0aW9uLjwvRk9OVD48L0RJVj4NCjxESVY+PEZPTlQgc2l6ZT0y Pkkgc2VlIHRoYXQgTzIgbm90IHN1cHBvcnQgbGludXggbm93IG9uIHlvdXIgd2ViLGNhbiB5b3Ug dGVsbCANCm1lIHRoZTwvRk9OVD48L0RJVj4NCjxESVY+PEZPTlQgc2l6ZT0yPnJlYXNvbj9BcyBz ZXJpZXMgb2YgU0dJIHdvcmtzdGF0aW9ucyxPMixJbmR5LDxTUEFOIGxhbmc9RU4tVVMgDQpzdHls ZT0iRk9OVC1GQU1JTFk6ICdUaW1lcyBOZXcgUm9tYW4nOyBGT05ULVNJWkU6IDEwLjVwdDsgbXNv LWJpZGktZm9udC1zaXplOiAxMi4wcHQ7IG1zby1mYXJlYXN0LWZvbnQtZmFtaWx5OiDLzszlOyBt c28tZm9udC1rZXJuaW5nOiAxLjBwdDsgbXNvLWFuc2ktbGFuZ3VhZ2U6IEVOLVVTOyBtc28tZmFy ZWFzdC1sYW5ndWFnZTogWkgtQ047IG1zby1iaWRpLWxhbmd1YWdlOiBBUi1TQSI+T255eCZuYnNw OyxPcmlnaW4sdGhleSANCmhhdmUgc2FtZTwvU1BBTj48L0ZPTlQ+PC9ESVY+DQo8RElWPjxGT05U IHNpemU9Mj48U1BBTiBsYW5nPUVOLVVTIA0Kc3R5bGU9IkZPTlQtRkFNSUxZOiAnVGltZXMgTmV3 IFJvbWFuJzsgRk9OVC1TSVpFOiAxMC41cHQ7IG1zby1iaWRpLWZvbnQtc2l6ZTogMTIuMHB0OyBt c28tZmFyZWFzdC1mb250LWZhbWlseTogy87M5TsgbXNvLWZvbnQta2VybmluZzogMS4wcHQ7IG1z by1hbnNpLWxhbmd1YWdlOiBFTi1VUzsgbXNvLWZhcmVhc3QtbGFuZ3VhZ2U6IFpILUNOOyBtc28t YmlkaS1sYW5ndWFnZTogQVItU0EiPmFyY2hpdGVjdHVyZSxzYW1lIA0KY3B1LHdoeSBvdGhlcnMg c3VwcG9ydCBsaW51eCxPMiBub3Qgc3VwcG9ydC48L1NQQU4+PC9GT05UPjwvRElWPg0KPERJVj48 Rk9OVCBzaXplPTI+PFNQQU4gbGFuZz1FTi1VUyANCnN0eWxlPSJGT05ULUZBTUlMWTogJ1RpbWVz IE5ldyBSb21hbic7IEZPTlQtU0laRTogMTAuNXB0OyBtc28tYmlkaS1mb250LXNpemU6IDEyLjBw dDsgbXNvLWZhcmVhc3QtZm9udC1mYW1pbHk6IMvOzOU7IG1zby1mb250LWtlcm5pbmc6IDEuMHB0 OyBtc28tYW5zaS1sYW5ndWFnZTogRU4tVVM7IG1zby1mYXJlYXN0LWxhbmd1YWdlOiBaSC1DTjsg bXNvLWJpZGktbGFuZ3VhZ2U6IEFSLVNBIj4mbmJzcDsmbmJzcDsmbmJzcDsmbmJzcDsmbmJzcDsm bmJzcDsmbmJzcDsgDQpCZXN0IHJlZ2FyZHMuPC9TUEFOPjwvRk9OVD48L0RJVj4NCjxESVY+PEZP TlQgc2l6ZT0yPjxTUEFOIGxhbmc9RU4tVVMgDQpzdHlsZT0iRk9OVC1GQU1JTFk6ICdUaW1lcyBO ZXcgUm9tYW4nOyBGT05ULVNJWkU6IDEwLjVwdDsgbXNvLWJpZGktZm9udC1zaXplOiAxMi4wcHQ7 IG1zby1mYXJlYXN0LWZvbnQtZmFtaWx5OiDLzszlOyBtc28tZm9udC1rZXJuaW5nOiAxLjBwdDsg bXNvLWFuc2ktbGFuZ3VhZ2U6IEVOLVVTOyBtc28tZmFyZWFzdC1sYW5ndWFnZTogWkgtQ047IG1z by1iaWRpLWxhbmd1YWdlOiBBUi1TQSI+Qmp6aGVuZzwvU1BBTj48L0ZPTlQ+PC9ESVY+PC9GT05U PjwvRElWPjwvQk9EWT48L0hUTUw+DQo= ------=_NextPart_000_0025_01C04D5E.CFC1C0E0-- From owner-linux-mips@oss.sgi.com Sun Nov 12 20:41:07 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 20:40:47 -0800 Received: from [166.70.178.116] ([166.70.178.116]:64260 "EHLO home.knm.org") by oss.sgi.com with ESMTP id ; Sun, 12 Nov 2000 20:40:21 -0800 Received: (from mark@localhost) by home.knm.org (8.9.3/8.9.3) id VAA19564; Sun, 12 Nov 2000 21:39:36 -0700 Date: Sun, 12 Nov 2000 21:39:36 -0700 Message-Id: <200011130439.VAA19564@home.knm.org> X-Authentication-Warning: home.knm.org: mark set sender to mark@home.knm.org using -f From: Mark Lehrer To: bjzheng@ict.ac.cn CC: linux-mips@oss.sgi.com In-reply-to: <002801c04d1b$c1adc320$a727e29f@ict.ac.cn> (bjzheng@ict.ac.cn) Subject: Re: Can you help me? References: <002801c04d1b$c1adc320$a727e29f@ict.ac.cn> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Does this kind of message violate any RFC's or anything? I can't read it in emacs. I am disturbed at how MS mail readers only use MIME types and don't include plain text. Mark ------=_NextPart_000_0025_01C04D5E.CFC1C0E0 Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: base64 SGVsbG86DQogICAgIEknbSBhIENoaW5lc2Ugc3R1ZGVudCxpIHdhbnQgdG8gcnVuIGxpbnV4IG9u IFNHSSBPMiB3b3Jrc3RhdGlvbi4NCkkgc2VlIHRoYXQgTzIgbm90IHN1cHBvcnQgbGludXggbm93 IG9uIHlvdXIgd2ViLGNhbiB5b3UgdGVsbCBtZSB0aGUNCnJlYXNvbj9BcyBzZXJpZXMgb2YgU0dJ IHdvcmtzdGF0aW9ucyxPMixJbmR5LE9ueXggLE9yaWdpbix0aGV5IGhhdmUgc2FtZQ0KYXJjaGl0 ZWN0dXJlLHNhbWUgY3B1LHdoeSBvdGhlcnMgc3VwcG9ydCBsaW51eCxPMiBub3Qgc3VwcG9ydC4N CiAgICAgICAgQmVzdCByZWdhcmRzLg0KQmp6aGVuZw0K From owner-linux-mips@oss.sgi.com Sun Nov 12 23:19:47 2000 Received: by oss.sgi.com id ; Sun, 12 Nov 2000 23:19:28 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:32007 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Sun, 12 Nov 2000 23:19:13 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id XAA16929; Sun, 12 Nov 2000 23:16:38 -0800 Date: Sun, 12 Nov 2000 23:16:38 -0800 From: Keith M Wesolowski To: Zheng Baojian Cc: linux-mips@oss.sgi.com Subject: Re: Can you help me? Message-ID: <20001112231638.A16609@chem.unr.edu> References: <002801c04d1b$c1adc320$a727e29f@ict.ac.cn> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <002801c04d1b$c1adc320$a727e29f@ict.ac.cn>; from bjzheng@ict.ac.cn on Mon, Nov 13, 2000 at 10:45:17AM +0800 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 13, 2000 at 10:45:17AM +0800, Zheng Baojian wrote: > I'm a Chinese student,i want to run linux on SGI O2 workstation. > I see that O2 not support linux now on your web,can you tell me the > reason?As series of SGI workstations,O2,Indy,Onyx ,Origin,they have same > architecture,same cpu,why others support linux,O2 not support. Harald Koerfgen and I (at least) have done some work on O2 and I can verify that it has at one point booted to userland (I no longer have the machine and thus do not know the status). To say that an O2 has the same architecture as the other machines you mention, however, is an oversimplification at best; these machines have numerous differences (no two use the same bus type/controller), and afaik Onyx is not and never has been supported. In fact, these machines don't even have the same CPUs; the r5ks used in O2 have different caches than those used in Indys, and the r10k O2s are another mess altogether. Welcome to the wonderful world of MIPS; 86 million machines, no two remotely similar. The NetBSD people have also done some work in this area. Between their work, the Irix headers - look but don't copy, and the existing Linux work - for which you might ask Harald if you are interested in improving it - it's possible to get a reasonably working kernel for r5k O2. More advanced work such as accelerated X and a driver for the built-in ethernet will most likely require additional documentation. The short answer, of course, is that nobody has ever had concurrent interest, free time, and access to hardware for a sufficient length of time. Please use plain text in the future. I recommend non-Microsoft mailers. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Nov 13 01:21:08 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 01:20:48 -0800 Received: from helena.bawue.de ([193.197.13.6]:25349 "HELO helena.bawue.de") by oss.sgi.com with SMTP id ; Mon, 13 Nov 2000 01:20:27 -0800 Received: by helena.bawue.de (Postfix, from userid 99) id 54D9D1F10E; Mon, 13 Nov 2000 10:20:14 +0100 (CET) To: wesolows@chem.unr.edu, bjzheng@ict.ac.cn Subject: Re: Can you help me? From: flaws@bawue.de Reply-To: flaws@bawue.de Cc: linux-mips@oss.sgi.com X-Mailer: AeroMail (http://the.cushman.net/reverb/aeromail/) Message-Id: <20001113092014.54D9D1F10E@helena.bawue.de> Date: Mon, 13 Nov 2000 10:20:14 +0100 (CET) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > On Mon, Nov 13, 2000 at 10:45:17AM +0800, Zheng Baojian wrote: > > > I'm a Chinese student,i want to run linux on SGI O2 workstation. > > I see that O2 not support linux now on your web,can you tell me the > > reason?As series of SGI workstations,O2,Indy,Onyx ,Origin,they have same > > architecture,same cpu,why others support linux,O2 not support. > > Harald Koerfgen and I (at least) have done some work on O2 and I can > verify that it has at one point booted to userland (I no longer have > the machine and thus do not know the status). To say that an O2 has > the same architecture as the other machines you mention, however, is > an oversimplification at best; these machines have numerous > differences (no two use the same bus type/controller), and afaik Onyx > is not and never has been supported. In fact, these machines don't AFAIK Onyx is pretty much the same as an Origin, except for the graphics hardware. Since Ralf is working on an Origin port, which is in quite a good state, I guess, Onyx should be supported, too. Without graphics, of course. Florian From owner-linux-mips@oss.sgi.com Mon Nov 13 02:29:58 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 02:29:48 -0800 Received: from piet.lfm.RWTH-Aachen.DE ([134.130.37.110]:10146 "EHLO piet.lfm.rwth-aachen.de") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 02:29:44 -0800 Received: from tango (tango [134.130.37.56]) by piet.lfm.rwth-aachen.de (8.9.3/8.9.3) with SMTP id LAA12121 for ; Mon, 13 Nov 2000 11:27:20 +0100 (MET) Message-ID: <012301c04d5c$b4d71b60$38258286@lfm.rwthaachen.de> From: "Markus Hoff-Holtmanns" To: References: <20001113092014.54D9D1F10E@helena.bawue.de> Subject: MIPS Linux and O2 and/or Octane... Date: Mon, 13 Nov 2000 11:30:12 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-Mimeole: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi folks! There probably already were numerous threads concerning this subject, but I'm new and I didn't find anything fitting in the archives. So here is my question. Anyone who did or tried a Linux port for O2, or contributed anything regarding that topic, could you please give me that information again. At the moment I try to gather as much info as possible in this regard, as we have some O2s running IRIX 6.3 and gathering dust most of the time. Any help appreciated. Markus -- Markus Hoff-Holtmanns RWTH Aachen Germany markus@lfm.rwth-aachen.de From owner-linux-mips@oss.sgi.com Mon Nov 13 03:15:28 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 03:15:19 -0800 Received: from voyager.cistron.net ([195.64.68.34]:29193 "EHLO smtp.cistron.nl") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 03:15:00 -0800 Received: from picard.cistron.nl ([195.64.65.20]) by smtp.cistron.nl with esmtp (Exim 3.13 #1 (Debian)) id 13vHZn-0002OM-00; Mon, 13 Nov 2000 12:15:03 +0100 Received: (from wichert@localhost) by picard.cistron.nl (8.9.3/8.9.3/Debian 8.9.3-6) id MAA07008; Mon, 13 Nov 2000 12:14:54 +0100 Date: Mon, 13 Nov 2000 12:14:54 +0100 From: Wichert Akkerman To: Mark Lehrer Cc: linux-mips@oss.sgi.com Subject: Re: Can you help me? Message-ID: <20001113121454.B6557@cistron.nl> Mail-Followup-To: Mark Lehrer , linux-mips@oss.sgi.com References: <002801c04d1b$c1adc320$a727e29f@ict.ac.cn> <200011130439.VAA19564@home.knm.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <200011130439.VAA19564@home.knm.org>; from mark@knm.org on Sun, Nov 12, 2000 at 09:39:36PM -0700 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Previously Mark Lehrer wrote: > Does this kind of message violate any RFC's or anything? I can't read > it in emacs. I am disturbed at how MS mail readers only use MIME types > and don't include plain text. Your emacs is broken then, it was a multipart/alternative message with one plan in our standard character set and the other in gb2312. mutt shows it just fine. Wichert. -- ________________________________________________________________ / Generally uninteresting signature - ignore at your convenience \ | wichert@cistron.nl http://www.liacs.nl/~wichert/ | | 1024D/2FA3BC2D 576E 100B 518D 2F16 36B0 2805 3CB8 9250 2FA3 BC2D | From owner-linux-mips@oss.sgi.com Mon Nov 13 07:05:40 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 07:05:31 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:13832 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 07:05:16 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id HAA19918; Mon, 13 Nov 2000 07:04:02 -0800 Date: Mon, 13 Nov 2000 07:04:02 -0800 From: Keith M Wesolowski To: flaws@bawue.de Cc: bjzheng@ict.ac.cn, linux-mips@oss.sgi.com Subject: Re: Can you help me? Message-ID: <20001113070402.A19583@chem.unr.edu> References: <20001113092014.54D9D1F10E@helena.bawue.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20001113092014.54D9D1F10E@helena.bawue.de>; from flaws@bawue.de on Mon, Nov 13, 2000 at 10:20:14AM +0100 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 13, 2000 at 10:20:14AM +0100, flaws@bawue.de wrote: > AFAIK Onyx is pretty much the same as an Origin, except for the graphics > hardware. Since Ralf is working on an Origin port, which is in quite a good > state, I guess, Onyx should be supported, too. > Without graphics, of course. You're confusing Onyx with Onyx2. The Onyx2 is Origin-like and probably works. The Onyx is sort of a multiprocessor version of the Crimson (or, alternately, a graphics-heavy version of a Challenge D). There were also Power Onyxen, with R8000 CPUs; I can't remember whether there were r10k versions. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Nov 13 07:28:10 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 07:28:00 -0800 Received: from mx.mips.com ([206.31.31.226]:55222 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 07:27:36 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id HAA05493 for ; Mon, 13 Nov 2000 07:27:11 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id HAA27952 for ; Mon, 13 Nov 2000 07:27:31 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id OAA29370 for ; Mon, 13 Nov 2000 14:20:54 +0100 (MET) Message-ID: <3A0FEAB6.7117CC3C@mips.com> Date: Mon, 13 Nov 2000 14:20:54 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: The do_fast_gettimeoffset function Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing The do_fast_gettimeoffset function below (taken from arch/mips/kernel/time.c) can only be used on 64-bit processors. I would like to be able to use this on a 32-bit processor. As I'm not completely sure what this function does, can someone who does please help me out ? /Carsten static unsigned long do_fast_gettimeoffset(void) { u32 count; unsigned long res, tmp; /* Last jiffy when do_fast_gettimeoffset() was called. */ static unsigned long last_jiffies=0; unsigned long quotient; /* * Cached "1/(clocks per usec)*2^32" value. * It has to be recalculated once each jiffy. */ static unsigned long cached_quotient=0; tmp = jiffies; quotient = cached_quotient; if (tmp && last_jiffies != tmp) { last_jiffies = tmp; __asm__(".set\tnoreorder\n\t" ".set\tnoat\n\t" ".set\tmips3\n\t" "lwu\t%0,%2\n\t" "dsll32\t$1,%1,0\n\t" "or\t$1,$1,%0\n\t" "ddivu\t$0,$1,%3\n\t" "mflo\t$1\n\t" "dsll32\t%0,%4,0\n\t" "nop\n\t" "ddivu\t$0,%0,$1\n\t" "mflo\t%0\n\t" ".set\tmips0\n\t" ".set\tat\n\t" ".set\treorder" :"=&r" (quotient) :"r" (timerhi), "m" (timerlo), "r" (tmp), "r" (USECS_PER_JIFFY) :"$1"); cached_quotient = quotient; } /* Get last timer tick in absolute kernel time */ count = read_32bit_cp0_register(CP0_COUNT); /* .. relative to previous jiffy (32 bits is enough) */ count -= timerlo; __asm__("multu\t%1,%2\n\t" "mfhi\t%0" :"=r" (res) :"r" (count), "r" (quotient)); /* * Due to possible jiffies inconsistencies, we need to check * the result so that we'll get a timer that is monotonic. */ if (res >= USECS_PER_JIFFY) res = USECS_PER_JIFFY-1; return res; } -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Mon Nov 13 09:57:32 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 09:57:22 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:12218 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 09:56:58 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id SAA12619; Mon, 13 Nov 2000 18:53:21 +0100 (MET) Date: Mon, 13 Nov 2000 18:53:20 +0100 (MET) From: "Maciej W. Rozycki" To: Ian Chilton cc: linux-mips@oss.sgi.com Subject: Re: Patch Problems with Glibc 2.2 In-Reply-To: <20001105235715.A5531@woody.ichilton.co.uk> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, 5 Nov 2000, Ian Chilton wrote: > I am having a problem with patch under glibc 2.2 > > patch: **** Only garbage was found in the patch input. > > If I exit my chroot, back to my 2.0.6 base and use the same source dir, with the same patch there, it works fine, so it is definatly the patch program. > > It was compiled exactly the same way as the 2.0.6 based base too. Tried re-compiling, and still the same.. > > Everything else so far seems to work under my 2.2 base, incl compiler etc.. This is due to the LFS support that's present in glibc 2.2 (fseeko() is the reason of the trouble here). Get a patch source RPM package from my FTP site (ftp://ftp.ds2.pg.gda.pl/pub/macro/) for a fix. An alternative solution is available in the current CVS version of patch, I am told. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Mon Nov 13 10:34:52 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 10:34:32 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:39663 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 10:34:26 -0800 Received: from scotty.mgnet.de (p3E9912F2.dip.t-dialin.net [62.153.18.242]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id TAA26951 for ; Mon, 13 Nov 2000 19:34:23 +0100 (MET) Received: (qmail 24468 invoked from network); 13 Nov 2000 18:34:18 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 13 Nov 2000 18:34:18 -0000 Date: Mon, 13 Nov 2000 19:34:20 +0100 (CET) From: Klaus Naumann To: Markus Hoff-Holtmanns cc: linux-mips@oss.sgi.com Subject: Re: MIPS Linux and O2 and/or Octane... In-Reply-To: <012301c04d5c$b4d71b60$38258286@lfm.rwthaachen.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 13 Nov 2000, Markus Hoff-Holtmanns wrote: > Hi folks! > > There probably already were numerous threads concerning this subject, but > I'm new and I didn't find anything fitting in the archives. So here is my > question. > > Anyone who did or tried a Linux port for O2, or contributed anything > regarding that topic, could you please give me that information again. At > the moment I try to gather as much info as possible in this regard, as we > have some O2s running IRIX 6.3 and gathering dust most of the time. As far as I know only Keith M. Wesolowski and Harald Koerfgen were trying to get Linux running and also got it to boot into usermode - the problem is that noone has such a machine. So if you have a bunch of them which collect dust and want to get rid of them this is the right place :-) Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Mon Nov 13 11:03:22 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 11:03:13 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:54970 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 11:02:49 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id UAA14948; Mon, 13 Nov 2000 20:02:48 +0100 (MET) Date: Mon, 13 Nov 2000 20:02:48 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Ian Chilton , linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org Subject: Re: User/Group Problem In-Reply-To: <20001108050158.B12999@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 8 Nov 2000, Ralf Baechle wrote: > - your chown / chgrp binaries are statically linked. In that case nss > won't work on MIPS until it's fixed ... That's actually not a MIPS-specific problem. This happens due to a bogus error from mmap() (when called by ld.so) which cannot handle certain valid requests -- when there is a non-zero suggested VM address, but the area and all space above it is already occupied or unavailable for other reasons. It can sometimes appear for other ports, as well (I have an i386 test case, for example), but it bites MIPS specifically, because of a non-zero initial VMA set for our shared objects. Here is a patch I use since July successfully. We need to wait until 2.4.1 or so (or maybe even 2.5) is released for it to be applied as 2.4.0-test* are currently code-frozen. Maybe we could apply it to our CVS for now? Ralf, what do you think? Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-2.4.0-test4.macro/mm/mmap.c linux-2.4.0-test4/mm/mmap.c --- linux-2.4.0-test4.macro/mm/mmap.c Sun Jul 16 22:27:29 2000 +++ linux-2.4.0-test4/mm/mmap.c Tue Jul 25 05:06:21 2000 @@ -175,7 +175,7 @@ if ((len = PAGE_ALIGN(len)) == 0) return addr; - if (len > TASK_SIZE || addr > TASK_SIZE-len) + if (len > TASK_SIZE || ((flags & MAP_FIXED) && (addr > TASK_SIZE - len))) return -EINVAL; /* offset overflow? */ @@ -356,20 +356,31 @@ unsigned long get_unmapped_area(unsigned long addr, unsigned long len) { struct vm_area_struct * vmm; + int pass = 0; if (len > TASK_SIZE) return 0; - if (!addr) - addr = TASK_UNMAPPED_BASE; - addr = PAGE_ALIGN(addr); - - for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { - /* At this point: (!vmm || addr < vmm->vm_end). */ - if (TASK_SIZE - len < addr) - return 0; - if (!vmm || addr + len <= vmm->vm_start) - return addr; - addr = vmm->vm_end; + + while (1) { + if (!addr) + addr = TASK_UNMAPPED_BASE; + addr = PAGE_ALIGN(addr); + + for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { + /* At this point: (!vmm || addr < vmm->vm_end). */ + if (TASK_SIZE - len < addr) { + if (pass > 0) + return 0; + else { + pass = 1; + addr = 0; + break; + } + } + if (!vmm || addr + len <= vmm->vm_start) + return addr; + addr = vmm->vm_end; + } } } #endif From owner-linux-mips@oss.sgi.com Mon Nov 13 11:15:12 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 11:15:02 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:56829 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 11:14:41 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eADJCR319253; Mon, 13 Nov 2000 11:12:27 -0800 Message-ID: <3A103DAE.463492A4@mvista.com> Date: Mon, 13 Nov 2000 11:14:54 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: Cross_compiler! References: <3A09DE18.E55FA70F@isratech.ro> <3A09ADDB.EA2A6246@mvista.com> <20001112211057.E15594@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > > On Wed, Nov 08, 2000 at 11:47:39AM -0800, Jun Sun wrote: > > > You can get the cross-compile tool chains from the monta vista ftp > > site. These tools are considered stable and recommeded - at least > > before Ralf shows his latest toys. :-0 > > > 2. egcs 1.0.3a > > Sorry to ruin your weekend but I've alredy put egcs-1.1.2 on oss two days > before your posting :-) > > Ralf My weekend was just fine - without reading this bothersome email. :-) I thought egcs-1.1.2 had some problems with binutil 2.8.1 and glibc 2.0.6. Was the problem solved? Jun From owner-linux-mips@oss.sgi.com Mon Nov 13 12:01:42 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 12:01:22 -0800 Received: from serv1.is1.u-net.net ([195.102.240.129]:7626 "EHLO serv1.is1.u-net.net") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 12:00:53 -0800 Received: from [213.48.88.27] (helo=zurg) by serv1.is1.u-net.net with smtp (Exim 3.12 #1) id 13vPmU-0006fU-00; Mon, 13 Nov 2000 20:00:42 +0000 From: "Ian Chilton" To: "Maciej W. Rozycki" , "Ralf Baechle" Cc: , Subject: RE: User/Group Problem Date: Mon, 13 Nov 2000 20:02:21 -0000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 In-Reply-To: Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > That's actually not a MIPS-specific problem. I actually got round this by copying /lib/libnss* from glibc 2.0.6 over, until I had finished compiling everything.. >From the LFS-Book: ------------ Quote -------------- Copying old NSS library files If your normal Linux system runs glibc-2.0, you need to copy the NSS library files to the LFS partition. Certain statically linked programs still depend on the NSS library, especially programs that need to lookup usernames,userid's and groupid's. You can check which C library version your normal Linux system uses by running: strings /lib/libc* | grep "release version" The output of that command should tell you something like this: GNU C Library stable release version 2.1.3, by Roland McGrath et al. If you have a libc-2.0.x file copy the NSS library files by running: cp -av /lib/libnss* $LFS/lib --------------- End Quote -------------- Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Nov 13 13:04:12 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 13:03:53 -0800 Received: from mail.ivm.net ([62.204.1.4]:2687 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 13:03:36 -0800 Received: from franz.no.dom (port166.duesseldorf.ivm.de [195.247.65.166]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id WAA15124; Mon, 13 Nov 2000 22:03:21 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20001112210049.C26606@lug-owl.de> Date: Mon, 13 Nov 2000 22:03:14 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Jan-Benedict Glaw Subject: RE: Build failure for R3000 DECstation Cc: linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 12-Nov-00 Jan-Benedict Glaw wrote: > I see this build failure: > > sysmips.c: In function `sys_sysmips': > sysmips.c:109: warning: implicit declaration of function `syscall_trace' > {standard input}: Assembler messages: > {standard input}:337: Error: opcode requires -mips2 or greater `ll' > {standard input}:339: Error: opcode requires -mips2 or greater `sc' > {standard input}:340: Error: opcode requires -mips2 or greater `beqzl' > {standard input}:341: Error: opcode requires -mips2 or greater `ll' Something like --- snip here --- diff -ruN /nfs/cvs/linux-2.3/linux/arch/mips/kernel/sysmips.c linux/arch/mips/kernel/sysmips.c --- /nfs/cvs/linux-2.3/linux/arch/mips/kernel/sysmips.c Sun Nov 12 16:05:54 2000 +++ linux/arch/mips/kernel/sysmips.c Mon Nov 13 19:35:46 2000 @@ -73,13 +73,16 @@ case MIPS_ATOMIC_SET: { unsigned int tmp; - +#ifndef CONFIG_CPU_HAS_LLSC + unsigned long flags; +#endif p = (int *) arg1; errno = verify_area(VERIFY_WRITE, p, sizeof(*p)); if (errno) return errno; errno = 0; +#ifdef CONFIG_CPU_HAS_LLSC __asm__(".set\tpush\t\t\t# sysmips(MIPS_ATOMIC, ...)\n\t" ".set\tnoreorder\n\t" ".set\tnoat\n\t" @@ -100,6 +103,12 @@ : "=&r" (tmp), "=o" (* (u32 *) p), "=r" (errno) : "r" (arg2), "o" (* (u32 *) p), "2" (errno) : "$1"); +#else + save_and_cli(flags); + errno |= __get_user(tmp, p); + errno |= __put_user(arg2, p); + restore_flags(flags); +#endif if (errno) return -EFAULT; --- snip here --- should fix this. However, this patch is untested and should be considered as an RFD. For unknown reasons my R3000 DECstation doesn't grok elf2ecoffed kernels any more. -- Regards, Harald From owner-linux-mips@oss.sgi.com Mon Nov 13 13:07:02 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 13:06:43 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:51981 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Mon, 13 Nov 2000 13:06:35 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Mon, 13 Nov 2000 16:06:08 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Mon, 13 Nov 2000 16:06:07 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209D07@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: irix vs. linux Date: Mon, 13 Nov 2000 15:26:01 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Until I can get Linux up and running I was going to try Irix. Any roadblocks to this approach that I should know about? Advantages to Linux on SGI over Irix? by the way, i saw Irix for sale on ebay, but there was only one cd. is this a full install. i thought Irix had more cds. how many cd's for linux on mips? Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Mon Nov 13 13:28:02 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 13:27:43 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:52857 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 13:27:25 -0800 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id NAA00092 for ; Mon, 13 Nov 2000 13:19:34 -0800 (PST) mail_from (andya@pinckneya.peachtree.sgi.com) Received: from pinckneya.peachtree.sgi.com (pinckneya.peachtree.sgi.com [169.238.221.130]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via SMTP id NAA63972 for ; Mon, 13 Nov 2000 13:25:39 -0800 (PST) Received: from sweetleaf.peachtree.sgi.com by pinckneya.peachtree.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id QAA08254; Mon, 13 Nov 2000 16:24:22 -0500 Received: from peachtree.sgi.com (localhost [127.0.0.1]) by sweetleaf.peachtree.sgi.com (SGI-8.9.3/8.9.3) with ESMTP id QAA04779; Mon, 13 Nov 2000 16:24:22 -0500 (EST) Message-ID: <3A105C05.9CEF7B7F@peachtree.sgi.com> Date: Mon, 13 Nov 2000 16:24:21 -0500 From: "Nils C. Anderson" Organization: SGI X-Mailer: Mozilla 4.7C-SGI [en] (X11; I; IRIX 6.5 IP22) X-Accept-Language: en MIME-Version: 1.0 To: tmaloney@ixl.com CC: linux-mips@oss.sgi.com Subject: Re: irix vs. linux References: <0A5319EEAF65D411825E00805FBBD8A1209D07@exchange.clt.ixl.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Irix 5.3 - 1 cdrom Irix 6.2 - 2 cdroms Irix 6.3 - 2 cdroms Irix 6.5 - at least 4, Install Tools, Foundation 1 & 2, Applications each overlay spans between 1 and 3 cdroms. tmaloney@ixl.com wrote: > > Until I can get Linux up and running I was going to try Irix. > > Any roadblocks to this approach that I should know about? Advantages to > Linux on SGI over Irix? > > by the way, i saw Irix for sale on ebay, but there was only one cd. is this > a full install. i thought Irix had more cds. > > how many cd's for linux on mips? > > Tim Maloney > Senior Developer > iXL, Inc. > 1930 Camden Road, Suite 2070 > Charlotte, NC 28203 > 704 943-7193 phone > tmaloney@ixl.com > www.ixl.com From owner-linux-mips@oss.sgi.com Mon Nov 13 14:11:33 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 14:11:13 -0800 Received: from u-174.karlsruhe.ipdial.viaginterkom.de ([62.180.10.174]:25356 "EHLO u-174.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 14:11:01 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Mon, 13 Nov 2000 10:47:35 +0100 Date: Mon, 13 Nov 2000 10:47:35 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation Message-ID: <20001113104735.A3253@bacchus.dhis.org> References: <20001112210049.C26606@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001112210049.C26606@lug-owl.de>; from jbglaw@lug-owl.de on Sun, Nov 12, 2000 at 09:00:49PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Nov 12, 2000 at 09:00:49PM +0100, Jan-Benedict Glaw wrote: > I see this build failure: > > mipsel-linux-gcc -D__KERNEL__ -I/usr/src/mipsel/linux/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -mcpu=r3000 -mips1 -pipe -c -o sysmips.o sysmips.c > sysmips.c: In function `sys_sysmips': > sysmips.c:109: warning: implicit declaration of function `syscall_trace' > {standard input}: Assembler messages: > {standard input}:337: Error: opcode requires -mips2 or greater `ll' > {standard input}:339: Error: opcode requires -mips2 or greater `sc' > {standard input}:340: Error: opcode requires -mips2 or greater `beqzl' > {standard input}:341: Error: opcode requires -mips2 or greater `ll' > make[1]: *** [sysmips.o] Error 1 The sysmips(MIPS_ATOMIC_SET, ...) implementation used to be completly broken. I fixed it for CPUs with ll/sc and left the part with ll/sc to others. Obviously none of them seemed to care so now I'm doing the quick fix. Frankly, a syscall which shouldn't be used doesn't deserve more attention ... Ralf From owner-linux-mips@oss.sgi.com Mon Nov 13 14:20:43 2000 Received: by oss.sgi.com id ; Mon, 13 Nov 2000 14:20:33 -0800 Received: from u-174.karlsruhe.ipdial.viaginterkom.de ([62.180.10.174]:27404 "EHLO u-174.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 13 Nov 2000 14:20:24 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Mon, 13 Nov 2000 23:19:49 +0100 Date: Mon, 13 Nov 2000 23:19:49 +0100 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: Ian Chilton , linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org Subject: Re: User/Group Problem Message-ID: <20001113231949.B16012@bacchus.dhis.org> References: <20001108050158.B12999@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Mon, Nov 13, 2000 at 08:02:48PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 13, 2000 at 08:02:48PM +0100, Maciej W. Rozycki wrote: > > - your chown / chgrp binaries are statically linked. In that case nss > > won't work on MIPS until it's fixed ... > > That's actually not a MIPS-specific problem. This happens due to a bogus > error from mmap() (when called by ld.so) which cannot handle certain valid > requests -- when there is a non-zero suggested VM address, but the area > and all space above it is already occupied or unavailable for other > reasons. It can sometimes appear for other ports, as well (I have an i386 > test case, for example), but it bites MIPS specifically, because of a > non-zero initial VMA set for our shared objects. > > Here is a patch I use since July successfully. We need to wait until > 2.4.1 or so (or maybe even 2.5) is released for it to be applied as > 2.4.0-test* are currently code-frozen. Maybe we could apply it to our CVS > for now? Ralf, what do you think? There is second interpretation of this problem - the address passed to mmap is bogus, so this computation needs to be fixed. Ralf From owner-linux-mips@oss.sgi.com Tue Nov 14 06:21:16 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 06:20:56 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:49861 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 06:20:37 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id PAA17764; Tue, 14 Nov 2000 15:19:11 +0100 (MET) Date: Tue, 14 Nov 2000 15:19:11 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Ian Chilton , linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org, Andreas Jaeger Subject: Re: User/Group Problem In-Reply-To: <20001113231949.B16012@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 13 Nov 2000, Ralf Baechle wrote: > > Here is a patch I use since July successfully. We need to wait until > > 2.4.1 or so (or maybe even 2.5) is released for it to be applied as > > 2.4.0-test* are currently code-frozen. Maybe we could apply it to our CVS > > for now? Ralf, what do you think? > > There is second interpretation of this problem - the address passed to > mmap is bogus, so this computation needs to be fixed. Where is it written mmap() is allowed to fail when a bogus VM address is passed but MAP_FIXED is not set? I believe mmap() should choose a different VM address in this case, as long as much enough contiguous VM space is available anywhere to satisfy the requested length. Surely, map_segment() (see dl-load.c) might call mmap(0, ...) after mmap(, ...) fails when MAP_FIXED is not set but wouldn't that be a dirty hack? We'd better fix the kernel. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Nov 14 07:34:37 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 07:34:17 -0800 Received: from smtp.algor.co.uk ([62.254.210.199]:50374 "EHLO kenton.algor.co.uk") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 07:33:53 -0800 Received: from gladsmuir.algor.co.uk (dom@gladsmuir.algor.co.uk [192.168.5.75]) by kenton.algor.co.uk (8.9.3/8.8.8) with ESMTP id PAA16283; Tue, 14 Nov 2000 15:33:48 GMT Received: (from dom@localhost) by gladsmuir.algor.co.uk (8.8.5/8.8.5) id PAA00560; Tue, 14 Nov 2000 15:44:13 GMT Date: Tue, 14 Nov 2000 15:44:13 GMT Message-Id: <200011141544.PAA00560@gladsmuir.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="dMNvDsnJMR" Content-Transfer-Encoding: 7bit To: Ralf Baechle Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: MIPS HOWTO In-Reply-To: <20001106204426.A23625@bacchus.dhis.org> References: <20001106204426.A23625@bacchus.dhis.org> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --dMNvDsnJMR Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Ralf Baechle (ralf@oss.sgi.com) writes: > November 15 is the deadline for a new edition of ``Linux, the Complete > Reference'' which the MIPS Howto will be part of. So please everybody > take a look at the documente at http://oss.sgi.com/mips/mips-howto.html > and send me updates, preferably as unified diffs for the SGML source > code. Here's one patch to your SGML for Algorithmics' boards: --dMNvDsnJMR Content-Type: text/plain Content-Disposition: inline; filename="mips-howto.sgml.diff" Content-Transfer-Encoding: 7bit *** mips-howto.sgml~ Tue Nov 7 09:45:30 2000 --- mips-howto.sgml Tue Nov 14 15:28:11 2000 *************** *** 296,308 **** This machine is a OEM variant of the SGI Indigo and therefore also still unsupported. ! Algorithmics P4032

! The Algorithmics P4032 port is at the time of this writing still running ! Linux 2.1.36. ! Algorithmics P5064

! The P5064 is basically an R5000-based 64bit variant of the P4032. A port is ! ongoing. DECstation series

During the late 80's and the early 90's Digital (now Compaq) built MIPS based --- 296,337 ---- This machine is a OEM variant of the SGI Indigo and therefore also still unsupported. ! Algorithmics P-4032, P-5064, P-6032

! Algorithmics () make a series of ! single-board computers for MIPS prototyping, and maintain Linux kernels ! for all of them: ! ! P-6032 is a new board for CPUs with 32-bit buses (QED ! RM5231, NEC Vr43x0, NEC Vr5432, IDT 64x74) ! P-4032 is an older board obsoleted by P-6032. ! P-5064 is for CPUs with 64-bit buses, notably QED's RM70xx ! and RM52xx series. ! ! All the boards have common I/O plus ethernet and disk interfaces ! onboard, with spare PCI slots for adding different controllers. ! They're highly configurable, so will run with either byte order. ! All are suitable targets for 64-bit kernels, but (so far) all the ! Linux work we've done has been using 32-bit code. ! ! They're available, supported and documented with PDF manuals ! available online, like ! ! for the P-6032. ! ! At the time of writing (November 2000) we are using a 2.2.x ! kernel, and we're sharing kernel code with the ports being done by ! people from MIPS Technologies Inc (). ! Algorithmics wrote the floating point trap handler and emulator used ! in this kernel - essential for MIPS CPUs to run floating point ! operations reliably and correctly. ! ! Algorithmics' kernels and a link to the MIPS userland can be found ! from a jump page at ! ! ! You can contact us at . DECstation series

During the late 80's and the early 90's Digital (now Compaq) built MIPS based --dMNvDsnJMR Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit -- Dominic Sweetman Algorithmics Ltd The Fruit Farm, Ely Road, Chittering, CAMBS CB5 9PH, ENGLAND phone: +44 1223 706200 / fax: +44 1223 706250 / home: +44 20 7226 0032 http://www.algor.co.uk --dMNvDsnJMR-- From owner-linux-mips@oss.sgi.com Tue Nov 14 09:31:27 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 09:31:18 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:57543 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 09:30:55 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id SAA24854; Tue, 14 Nov 2000 18:24:14 +0100 (MET) Date: Tue, 14 Nov 2000 18:24:13 +0100 (MET) From: "Maciej W. Rozycki" To: Carsten Langgaard cc: linux-mips@oss.sgi.com Subject: Re: The do_fast_gettimeoffset function In-Reply-To: <3A0FEAB6.7117CC3C@mips.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 13 Nov 2000, Carsten Langgaard wrote: > The do_fast_gettimeoffset function below (taken from > arch/mips/kernel/time.c) can only be used on 64-bit processors. > I would like to be able to use this on a 32-bit processor. As I'm not > completely sure what this function does, can someone who does please > help me out ? The function performs a 64-bit division. You may look at do_ioasic_gettimeoffset which is almost identical (merging of these two functions into a single one is actually on my TODO list) but it works for 32-bit processors. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Nov 14 10:56:59 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 10:56:50 -0800 Received: from u-177.karlsruhe.ipdial.viaginterkom.de ([62.180.10.177]:32516 "EHLO u-177.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 10:56:35 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 14 Nov 2000 17:16:46 +0100 Date: Tue, 14 Nov 2000 17:16:46 +0100 From: Ralf Baechle To: Jun Sun Cc: Nicu Popovici , linux-mips@oss.sgi.com Subject: Re: Cross_compiler! Message-ID: <20001114171646.B1117@bacchus.dhis.org> References: <3A09DE18.E55FA70F@isratech.ro> <3A09ADDB.EA2A6246@mvista.com> <20001112211057.E15594@bacchus.dhis.org> <3A103DAE.463492A4@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A103DAE.463492A4@mvista.com>; from jsun@mvista.com on Mon, Nov 13, 2000 at 11:14:54AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 13, 2000 at 11:14:54AM -0800, Jun Sun wrote: > My weekend was just fine - without reading this bothersome email. :-) > > I thought egcs-1.1.2 had some problems with binutil 2.8.1 and glibc > 2.0.6. Was the problem solved? Kindof. I just dumped the multilib support. I don't know of anybody who was actually using it, so away with it ... Ralf From owner-linux-mips@oss.sgi.com Tue Nov 14 12:49:10 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 12:49:01 -0800 Received: from [62.145.23.107] ([62.145.23.107]:6755 "HELO fileserv2.Cologne.DE") by oss.sgi.com with SMTP id ; Tue, 14 Nov 2000 12:48:52 -0800 Received: from localhost (1860 bytes) by fileserv2.Cologne.DE via rmail with P:stdio/R:bind/T:smtp (sender: ) (ident using unix) id for ; Tue, 14 Nov 2000 21:48:39 +0100 (CET) (Smail-3.2.0.101 1997-Dec-17 #5 built 1998-Jan-19) Received: (from karsten@localhost) by excalibur.cologne.de (8.9.3/8.8.7) id TAA03123; Tue, 14 Nov 2000 19:54:08 +0100 Message-ID: <20001114195408.C1751@excalibur.cologne.de> Date: Tue, 14 Nov 2000 19:54:08 +0100 From: Karsten Merker To: Ralf Baechle , linux-mips@oss.sgi.com Subject: Re: MIPS HOWTO Mail-Followup-To: Ralf Baechle , linux-mips@oss.sgi.com References: <20001106204426.A23625@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.91i In-Reply-To: <20001106204426.A23625@bacchus.dhis.org>; from Ralf Baechle on Mon, Nov 06, 2000 at 08:44:26PM +0100 X-No-Archive: yes Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 06, 2000 at 08:44:26PM +0100, Ralf Baechle wrote: > November 15 is the deadline for a new edition of ``Linux, the Complete > Reference'' which the MIPS Howto will be part of. So please everybody > take a look at the documente at http://oss.sgi.com/mips/mips-howto.html > and send me updates, preferably as unified diffs for the SGML source > code. Sorry, not as patch to the SGML code, but nonetheless: [4.1 Redhat] > Also, there's a distribution based on Red Hat 5.2 that's targeting the > Cobalt Qubes. Those binaries will work perfectly on other MIPSel > architectures available at ftp://intel.cleveland.lug.net/pub/Mipsel. ^ and are available > ftp://bolug.uni-bonn.de/mips has various rpm packages from Redhat 6.0, > and 6.1. from Redhat 6.0, 6.1 and 6.2. Greetings, Karsten -- #include Nach Paragraph 28 Abs. 3 Bundesdatenschutzgesetz widerspreche ich der Nutzung oder Uebermittlung meiner Daten fuer Werbezwecke oder fuer die Markt- oder Meinungsforschung. From owner-linux-mips@oss.sgi.com Tue Nov 14 13:31:10 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 13:30:51 -0800 Received: from mail.ivm.net ([62.204.1.4]:37158 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 13:30:36 -0800 Received: from franz.no.dom (port120.duesseldorf.ivm.de [195.247.65.120]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id WAA18232; Tue, 14 Nov 2000 22:30:23 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20001113104735.A3253@bacchus.dhis.org> Date: Tue, 14 Nov 2000 22:30:17 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Ralf Baechle Subject: Re: Build failure for R3000 DECstation Cc: linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 13-Nov-00 Ralf Baechle wrote: > The sysmips(MIPS_ATOMIC_SET, ...) implementation used to be completly broken. > I fixed it for CPUs with ll/sc and left the part with ll/sc to others. > > Obviously none of them seemed to care so now I'm doing the quick fix. > Frankly, a syscall which shouldn't be used doesn't deserve more attention ... Well, it seems as if there are people with a different opinion. Fresh from the glibc CVS (libc/sysdeps/unix/sysv/linux/mips/sys/tas.h): # if (_MIPS_ISA >= _MIPS_ISA_MIPS2) _EXTERN_INLINE int _test_and_set (int *p, int v) __THROW { [ll/sc implementation snipped] } # else /* !(_MIPS_ISA >= _MIPS_ISA_MIPS2) */ _EXTERN_INLINE int _test_and_set (int *p, int v) __THROW { return sysmips (MIPS_ATOMIC_SET, (int) p, v, 0); } # endif /* !(_MIPS_ISA >= _MIPS_ISA_MIPS2) */ Personally I like this more than a kernel ll/sc emulation. A syscall is likely to be faster than at least two illegal instruction exceptions. If you're concerned about binary compatibilty, the syscall should work on ISA>=2 CPUs as well. -- Regards, Harald From owner-linux-mips@oss.sgi.com Tue Nov 14 13:35:31 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 13:35:21 -0800 Received: from mx.mips.com ([206.31.31.226]:41163 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 13:35:14 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id NAA20023; Tue, 14 Nov 2000 13:34:49 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id NAA18844; Tue, 14 Nov 2000 13:35:04 -0800 (PST) Message-ID: <01d501c04e83$3a7e1e40$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Karsten Merker" , "Ralf Baechle" , References: <20001106204426.A23625@bacchus.dhis.org> <20001114195408.C1751@excalibur.cologne.de> Subject: Re: MIPS HOWTO Date: Tue, 14 Nov 2000 22:38:14 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > Sorry, not as patch to the SGML code, but nonetheless: > > [4.1 Redhat] > > > Also, there's a distribution based on Red Hat 5.2 that's targeting the > > Cobalt Qubes. Those binaries will work perfectly on other MIPSel > > architectures available at ftp://intel.cleveland.lug.net/pub/Mipsel. > ^ > and are available Not in SGML either, but so long as we're talking about the mipsel binaries, it may be worth noting that I put together a compilation of the RedHat 5.2 mipsel distribution that includes the all the packages on the cleveland.lug site, plus quite a few others from elsewhere that are either newer than, or missing from, the cleveland.lug distribution. This can be found via HTML at http://www.paralogos.com/mipslinux or directly by FTP at ftp://ftp.paralogos.com/pub/linux/mips/RPMS/mipsel/ Regards, Kevin K. From owner-linux-mips@oss.sgi.com Tue Nov 14 13:39:21 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 13:39:11 -0800 Received: from mail.ivm.net ([62.204.1.4]:51241 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 13:39:00 -0800 Received: from franz.no.dom (port120.duesseldorf.ivm.de [195.247.65.120]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id WAA18225; Tue, 14 Nov 2000 22:30:22 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <012301c04d5c$b4d71b60$38258286@lfm.rwthaachen.de> Date: Tue, 14 Nov 2000 22:30:15 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Markus Hoff-Holtmanns Subject: RE: MIPS Linux and O2 and/or Octane... Cc: linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 13-Nov-00 Markus Hoff-Holtmanns wrote: > Hi folks! Selber hi! > There probably already were numerous threads concerning this subject, but > I'm new and I didn't find anything fitting in the archives. So here is my > question. > > Anyone who did or tried a Linux port for O2, or contributed anything > regarding that topic, could you please give me that information again. At > the moment I try to gather as much info as possible in this regard, as we > have some O2s running IRIX 6.3 and gathering dust most of the time. Well, I guess I should update the FAQ :) Keith and I have been working on O2 support, but due to a chronical lack of time on my side progress is slow. The actual status is: o kernel boots and detects the machine and memory size. o serial console works o periodic interrupts working (the poor man's CPO_COUNT/CP0_COMPARE version) o PCI code detects the onboard Adaptec AIC-7880 SCSI host adapters o The Adaptec driver itself crashes o The existing cache management does not handle secondary caches tied to a R5000 CPU too well. Read: userland programs crash without evil hacks, actually. o R10000s will _not_ work for quite a while. For the records: > boot bootp()/vmlinux 130768+22320+3184+341792+48560d+4604+6816 entry: 0x87fa60d0 Setting $netaddr to 192.168.0.7 (from server intel) Obtaining /vmlinux from server intel 656824+81120+112564 entry: 0x80002584 ARCH: SGI-IP32 PROMLIB: ARC firmware Version 1 Revision 10 PROMLIB: Total free ram 122888K / 120MB. Loading R4000 MMU routines. CPU revision is: 00002321 Primary instruction cache 32kb, linesize 32 bytes. Primary data cache 32kb, linesize 32 bytes. Secondary cache sized at 128K linesize 32 bytes. Linux version 2.4.0-test9 (harry@intel) (gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)) #1 Die Nov 14 22:14:10 CET 2000 On node 0 totalpages: 32646 zone(0): 32646 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: Calibrating delay loop... 359.63 BogoMIPS Memory: 120708k/130584k available (641k kernel code, 9876k reserved, 46k data, 32k init) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Checking for 'wait' instruction... available. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 Serial driver version 5.02 (2000-08-09) with SHARE_IRQ enabled ttyS00 at 0x0000 (irq = 14) is a 16550A ttyS01 at 0x0000 (irq = 0) is a 16550A Kernel panic: I have no root and I want to scream Please note that the secondary cache size and the BogoMIPS are, well, bogus :) -- Regards, Harald From owner-linux-mips@oss.sgi.com Tue Nov 14 15:12:31 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 15:12:21 -0800 Received: from tower.ti.com ([192.94.94.5]:13196 "EHLO tower.ti.com") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 15:12:12 -0800 Received: from dlep8.itg.ti.com ([157.170.134.88]) by tower.ti.com (8.11.1/8.11.1) with ESMTP id eAENC6911709 for ; Tue, 14 Nov 2000 17:12:06 -0600 (CST) Received: from dlep8.itg.ti.com (localhost [127.0.0.1]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA09938 for ; Tue, 14 Nov 2000 17:12:06 -0600 (CST) Received: from dlep3.itg.ti.com (dlep3-maint.itg.ti.com [157.170.133.16]) by dlep8.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA09923 for ; Tue, 14 Nov 2000 17:12:05 -0600 (CST) Received: from ti.com (IDENT:bbrown@bbrowndt.sc.ti.com [158.218.100.180]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA22060 for ; Tue, 14 Nov 2000 17:12:05 -0600 (CST) Message-ID: <3A11C6C5.C2CAB92E@ti.com> Date: Tue, 14 Nov 2000 16:12:05 -0700 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: egcs 1.0.3a build error? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I am trying to natively build egcs-1.0.3a-2 on an Atlas board (r4kc little endian). I followed the emails and pulled down ftp://ftp.mvista.com/pub/Area51/mips_le/misc/egcs-10.03a.tar.gz and ftp://oss.sgi.com/pub/linux/mips/egcs/egcs-1.0.3a-2.diff.gz applied the diff and did configure and then make. (I'm running binutils-2.8.1 glibc-2.0.6 and egcs-1.0.2). The build fails with this output: /tmp/cca30501.s: Assembler messages: /tmp/cca30501.s:136: Internal error! Assertion failure in mips_emit_delays at ./config/tc-mips.c line 2231. Please report this bug. make[1]: *** [xexit.o] Error 1 make: *** [all-target-libiberty] Error 2 I have been unable to figure out what the problem is. Any ideas? From owner-linux-mips@oss.sgi.com Tue Nov 14 15:42:01 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 15:41:51 -0800 Received: from u-210.karlsruhe.ipdial.viaginterkom.de ([62.180.18.210]:8452 "EHLO u-210.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 15:41:40 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 15 Nov 2000 00:41:22 +0100 Date: Wed, 15 Nov 2000 00:41:22 +0100 From: Ralf Baechle To: Harald Koerfgen Cc: linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation Message-ID: <20001115004122.G927@bacchus.dhis.org> References: <20001113104735.A3253@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from Harald.Koerfgen@home.ivm.de on Tue, Nov 14, 2000 at 10:30:17PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 14, 2000 at 10:30:17PM +0100, Harald Koerfgen wrote: > > Obviously none of them seemed to care so now I'm doing the quick fix. > > Frankly, a syscall which shouldn't be used doesn't deserve more attention ... > > Well, it seems as if there are people with a different opinion. Fresh from the > glibc CVS (libc/sysdeps/unix/sysv/linux/mips/sys/tas.h): I know. Otherwise I'd have plain killed this syscall rsn. > Personally I like this more than a kernel ll/sc emulation. A syscall is likely > to be faster than at least two illegal instruction exceptions. If you're > concerned about binary compatibilty, the syscall should work on ISA>=2 CPUs as > well. The idea is to punish the least widespread architecture and this are the non-ll/sc CPUs. Just like Linux is no longer performing optimally on x86. In any case, for uniprocessor non-ll/sc machines there is also a better solution availble with no syscalls at all. It's easy to implement, just use the fact that any exception will change the values of k0/k1. That of course breaks silently on SMP. glibc 2.2 calls this sysmips(). very often so optimizing them is fairly important ... Ralf From owner-linux-mips@oss.sgi.com Tue Nov 14 16:59:02 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 16:58:52 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:4814 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 16:58:29 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id BAA12683; Wed, 15 Nov 2000 01:58:21 +0100 (MET) Date: Wed, 15 Nov 2000 01:58:21 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation In-Reply-To: <20001115004122.G927@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 15 Nov 2000, Ralf Baechle wrote: > In any case, for uniprocessor non-ll/sc machines there is also a better > solution availble with no syscalls at all. It's easy to implement, just > use the fact that any exception will change the values of k0/k1. That of > course breaks silently on SMP. Can you guarantee it??? Well I can guarantee k0 and k1 won't change when least expected. ;-) AFAIK, the only fact guaranteed is that exception handlers do not preserve the values of the scratch registers, but it does not mean the last value written there is always different from what was there upon a handler's entry... -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Nov 14 17:44:42 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 17:44:32 -0800 Received: from u-210.karlsruhe.ipdial.viaginterkom.de ([62.180.18.210]:34820 "EHLO u-210.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 17:44:20 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 15 Nov 2000 02:43:58 +0100 Date: Wed, 15 Nov 2000 02:43:58 +0100 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation Message-ID: <20001115024358.A3182@bacchus.dhis.org> References: <20001115004122.G927@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Wed, Nov 15, 2000 at 01:58:21AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 15, 2000 at 01:58:21AM +0100, Maciej W. Rozycki wrote: > > In any case, for uniprocessor non-ll/sc machines there is also a better > > solution availble with no syscalls at all. It's easy to implement, just > > use the fact that any exception will change the values of k0/k1. That of > > course breaks silently on SMP. > > Can you guarantee it??? Well I can guarantee k0 and k1 won't change when > least expected. ;-) AFAIK, the only fact guaranteed is that exception > handlers do not preserve the values of the scratch registers, but it does > not mean the last value written there is always different from what was > there upon a handler's entry... Make that change k0 to a non-zero value. So a R3000 UP spinlock can look like: move k0, zero li t0, 1 0: sw t0, spin bnez k0, 0b [critical section] sw zero, spin Ralf (Who should write thousant times ``I shall not post with a phone in my hand'') From owner-linux-mips@oss.sgi.com Tue Nov 14 19:13:24 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 19:13:14 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:56049 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 19:12:56 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eAF3Ac305933; Tue, 14 Nov 2000 19:10:38 -0800 Message-ID: <3A11FF44.D7B8D826@mvista.com> Date: Tue, 14 Nov 2000 19:13:08 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: "Maciej W. Rozycki" , Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation References: <20001115004122.G927@bacchus.dhis.org> <20001115024358.A3182@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > > On Wed, Nov 15, 2000 at 01:58:21AM +0100, Maciej W. Rozycki wrote: > > > > In any case, for uniprocessor non-ll/sc machines there is also a better > > > solution availble with no syscalls at all. It's easy to implement, just > > > use the fact that any exception will change the values of k0/k1. That of > > > course breaks silently on SMP. > > > > Can you guarantee it??? Well I can guarantee k0 and k1 won't change when > > least expected. ;-) AFAIK, the only fact guaranteed is that exception > > handlers do not preserve the values of the scratch registers, but it does > > not mean the last value written there is always different from what was > > there upon a handler's entry... > > Make that change k0 to a non-zero value. So a R3000 UP spinlock can look > like: > > move k0, zero > li t0, 1 > 0: sw t0, spin > bnez k0, 0b > > [critical section] > > sw zero, spin > > Ralf > > (Who should write thousant times ``I shall not post with a phone in my hand'') You should not post when you are sleepy. :-) The above code does not work - the loop is infinite as nobody will set k0 to 0 again if it is not zero for the first time. In fact, I don't think you can perform automic operation ONLY based on the knowledge whether a context switch has happened during a specified period. (It should be interesting to see if we can actually "prove" it.) I also doubt if k0 is absolutely non-zero after a context ... Jun From owner-linux-mips@oss.sgi.com Tue Nov 14 19:17:35 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 19:17:24 -0800 Received: from u-210.karlsruhe.ipdial.viaginterkom.de ([62.180.18.210]:38148 "EHLO u-210.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 19:17:18 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 15 Nov 2000 04:16:58 +0100 Date: Wed, 15 Nov 2000 04:16:57 +0100 From: Ralf Baechle To: Jun Sun Cc: "Maciej W. Rozycki" , Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation Message-ID: <20001115041657.A4556@bacchus.dhis.org> References: <20001115004122.G927@bacchus.dhis.org> <20001115024358.A3182@bacchus.dhis.org> <3A11FF44.D7B8D826@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A11FF44.D7B8D826@mvista.com>; from jsun@mvista.com on Tue, Nov 14, 2000 at 07:13:08PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 14, 2000 at 07:13:08PM -0800, Jun Sun wrote: > I also doubt if k0 is absolutely non-zero after a context ... If not the vendor of some R3k based product is in pretty deep sh*t :-) Ralf From owner-linux-mips@oss.sgi.com Tue Nov 14 20:17:04 2000 Received: by oss.sgi.com id ; Tue, 14 Nov 2000 20:16:55 -0800 Received: from [195.103.87.134] ([195.103.87.134]:18469 "EHLO rek.polithema.it") by oss.sgi.com with ESMTP id ; Tue, 14 Nov 2000 20:16:49 -0800 Received: from rek.polithema.it (TNTPool64.vegasnet.net [208.147.127.64]) by rek.polithema.it (8.8.5/8.8.5) with SMTP id EAA23341; Wed, 15 Nov 2000 04:59:44 +0100 From: cindy@rek.polithema.it Message-Id: <200011150359.EAA23341@rek.polithema.it> Received: from jan@eartyh.net by sammy@ifreenet.com (8.8.5/8.6.5) with SMTP id GAA03315 for ; Tue, 14 Nov 2000 19:50:20 -0600 (EST) To: llouyd@lamlamda.com Date: Tue, 14 Nov 00 19:50:20 EST Subject: hi Reply-To: therat@theline.net Comments: Authenticated sender is Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Looking for the hottest girls on the net? Look no further, we have the youngest, freshest girls on the Internet. We have thousands of pics, video clips, and live cams for your entertainment. If these girls can't get you off, then nobody can! Try us now for only $1.95 cents, no catch! What are you waiting for? http://www.clitchewiing.com/1/index.html   From owner-linux-mips@oss.sgi.com Wed Nov 15 03:23:54 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 03:23:45 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:56529 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 03:23:37 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id MAA26149; Wed, 15 Nov 2000 12:18:59 +0100 (MET) Date: Wed, 15 Nov 2000 12:18:57 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation In-Reply-To: <20001115024358.A3182@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 15 Nov 2000, Ralf Baechle wrote: > Make that change k0 to a non-zero value. So a R3000 UP spinlock can look > like: > > move k0, zero > li t0, 1 > 0: sw t0, spin > bnez k0, 0b > > [critical section] > > sw zero, spin Great! -- I haven't thought of such a solution. I'll prepare some code and see whether there are no races. It should work fine, indeed. > (Who should write thousant times ``I shall not post with a phone in my hand'') ;-) -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Nov 15 03:39:15 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 03:39:05 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:978 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 03:38:53 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id MAA26306; Wed, 15 Nov 2000 12:21:22 +0100 (MET) Date: Wed, 15 Nov 2000 12:21:22 +0100 (MET) From: "Maciej W. Rozycki" To: Jun Sun cc: Ralf Baechle , Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation In-Reply-To: <3A11FF44.D7B8D826@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 14 Nov 2000, Jun Sun wrote: > I also doubt if k0 is absolutely non-zero after a context ... We might force it if we need to... -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Nov 15 05:22:07 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 05:21:47 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:47887 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 15 Nov 2000 05:21:26 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 63AAC7CD4; Wed, 15 Nov 2000 13:21:09 +0000 (GMT) Date: Wed, 15 Nov 2000 13:21:08 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: [mailinglist@ichilton.co.uk: Re: egcs 1.0.3a build error?] Message-ID: <20001115132108.A22277@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing ----- Forwarded message from Ian Chilton ----- Date: Wed, 15 Nov 2000 13:19:58 +0000 From: Ian Chilton To: Brady Brown Subject: Re: egcs 1.0.3a build error? Hello, > /tmp/cca30501.s: Assembler messages: > /tmp/cca30501.s:136: Internal error! I have seen this with the new CVS GCC... Try compiling with CFLAGS="-O1" That fixed my problem. Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ ----- End forwarded message ----- -- Hello, Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 15 05:53:37 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 05:53:26 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:50191 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 15 Nov 2000 05:53:16 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id F19247CD4; Wed, 15 Nov 2000 13:53:14 +0000 (GMT) Date: Wed, 15 Nov 2000 13:53:14 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: GCC CVS Checkout Error Message-ID: <20001115135314.A22336@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Has anyone else seen this problem? It was working fine at the weekend, then just stopped working on Monday and has said that every since.... $ cvs -z9 -d :pserver:anoncvs@anoncvs.cygnus.com:/cvs/gcc co gcc cvs server: existing repository /cvs/gcc/egcs does not match /cvs/gcc/gcc cvs server: ignoring module gcc Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 15 08:03:48 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 08:03:29 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:32520 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Wed, 15 Nov 2000 08:03:20 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Wed, 15 Nov 2000 11:02:42 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Wed, 15 Nov 2000 11:02:42 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209D3F@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: 5400 rpm drive in an Indy Date: Wed, 15 Nov 2000 11:02:58 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I just got a 5400 rpm full height drive. it is 50 pin scsi and fits in my Indy. my concern is that the heat will be too much considering that it is right next to the processor. any Indy users with an opinion on this? oh, and when i put the ram and drive in, it played a little horn music on power-up, like the queen was arriving or something. since i have no os loaded as of yet(still waiting to score a cdrom drive), i don't know what that music means. maybe the queen is coming! christ, i have to go clean up that place :-) appologies for being off topic yet again, but i can't ask Linux questions till i get this beast running. then, careful what you wish for :-) here's a little something on topic though: where can i get a copy of HardHat on cd? i know it's only based on RedHat 5.1, but it's a place to start. thanks! Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Wed Nov 15 08:24:59 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 08:24:49 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:42503 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Wed, 15 Nov 2000 08:24:34 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Wed, 15 Nov 2000 11:23:59 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Wed, 15 Nov 2000 11:23:58 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209D40@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: re: Indy drive question Date: Wed, 15 Nov 2000 11:24:15 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=484497206&ed=97379781 this is the drive in question form my previous email. Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Wed Nov 15 08:59:19 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 08:58:58 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:57871 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 15 Nov 2000 08:58:31 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 050F17CEC; Wed, 15 Nov 2000 16:58:29 +0000 (GMT) Date: Wed, 15 Nov 2000 16:58:29 +0000 From: Ian Chilton To: tmaloney@ixl.com Cc: linux-mips@oss.sgi.com Subject: Re: 5400 rpm drive in an Indy Message-ID: <20001115165829.A22899@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > i don't know what that music means. It means: "hey, i'm on and working!" > here's a little something on topic though: where can i get a copy of HardHat > on cd? i know it's only based on RedHat 5.1, but it's a place to start. AFAIK, you can't ftp://oss.sgi.com/pub/linux/mips/redhat/ :-) Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 15 11:46:48 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 11:46:38 -0800 Received: from mail.ivm.net ([62.204.1.4]:45410 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 11:46:33 -0800 Received: from franz.no.dom (port73.duesseldorf.ivm.de [195.247.65.73]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id UAA10526; Wed, 15 Nov 2000 20:46:21 +0100 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20001115004122.G927@bacchus.dhis.org> Date: Wed, 15 Nov 2000 20:46:15 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Ralf Baechle Subject: Re: Build failure for R3000 DECstation Cc: linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 14-Nov-00 Ralf Baechle wrote: > In any case, for uniprocessor non-ll/sc machines there is also a better > solution availble with no syscalls at all. It's easy to implement, just > use the fact that any exception will change the values of k0/k1. That of > course breaks silently on SMP. Please, we do not even want to think about SMP boxen without ll/sc, do we? ;-) -- Regards, Harald From owner-linux-mips@oss.sgi.com Wed Nov 15 11:46:58 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 11:46:48 -0800 Received: from mail.ivm.net ([62.204.1.4]:48738 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 11:46:38 -0800 Received: from franz.no.dom (port73.duesseldorf.ivm.de [195.247.65.73]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id UAA10519; Wed, 15 Nov 2000 20:46:19 +0100 X-To: ralf@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <3A11FF44.D7B8D826@mvista.com> Date: Wed, 15 Nov 2000 20:46:13 +0100 (CET) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Jun Sun Subject: Re: Build failure for R3000 DECstation Cc: linux-mips@oss.sgi.com, "Maciej W. Rozycki" , Ralf Baechle Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 15-Nov-00 Jun Sun wrote: [R3000 UP userland spinlocks] > In fact, I don't think you can perform automic operation ONLY based on > the knowledge whether a context switch has happened during a specified > period. (It should be interesting to see if we can actually "prove" > it.) I doubt this as well, although I'd love to be proven wrong. > I also doubt if k0 is absolutely non-zero after a context ... That's not the problem here, yes, it is. At least for the the CONFIG_CPU_R3000 case. Have a look at include/asm-mips/stackframe.h, especially the R3000 version of the RESTORE_SP_AND_RET macro. -- Regards, Harald From owner-linux-mips@oss.sgi.com Wed Nov 15 12:18:09 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 12:17:58 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:62714 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 12:17:54 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eAFKFN319254; Wed, 15 Nov 2000 12:15:23 -0800 Message-ID: <3A12EF72.980C8E92@mvista.com> Date: Wed, 15 Nov 2000 12:17:54 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: Harald Koerfgen CC: linux-mips@oss.sgi.com, "Maciej W. Rozycki" , Ralf Baechle Subject: Re: Build failure for R3000 DECstation References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Harald Koerfgen wrote: > > I also doubt if k0 is absolutely non-zero after a context ... > > That's not the problem here, yes, it is. At least for the the CONFIG_CPU_R3000 > case. Have a look at include/asm-mips/stackframe.h, especially the R3000 > version of the RESTORE_SP_AND_RET macro. > I did not doubt the non-zero value of k0. I really doubted the approach: a userland primitive is based on non-documented, non-guarranteed kernel stack restoring code. Once something changes in kernel, you will get really obscure bugs. Jun From owner-linux-mips@oss.sgi.com Wed Nov 15 12:18:18 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 12:18:09 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:42712 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 12:17:55 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id VAA16627; Wed, 15 Nov 2000 21:17:35 +0100 (MET) Date: Wed, 15 Nov 2000 21:17:35 +0100 (MET) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Harald Koerfgen cc: Jun Sun , linux-mips@oss.sgi.com, Ralf Baechle Subject: Re: Build failure for R3000 DECstation In-Reply-To: Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 15 Nov 2000, Harald Koerfgen wrote: > On 15-Nov-00 Jun Sun wrote: > [R3000 UP userland spinlocks] > > In fact, I don't think you can perform automic operation ONLY based on > > the knowledge whether a context switch has happened during a specified > > period. (It should be interesting to see if we can actually "prove" > > it.) > > I doubt this as well, although I'd love to be proven wrong. Well, on UP the only events that can break atomicity are exceptions (here I treat interrupts as exceptions as well) and DMA accesses. I don't think we do DMA to user space, so this should not be a problem. So if we can detect an exception occured we may assume an operation failed and retry. It's not a problem for an exception handler to clobber k0 or k1 upon exit. Unfortunately we cannot use this implementation in the userland or we risk problems when running on SMP systems -- an ISA-I user binary might very well be run on an ISA-II (or higher) SMP system. But we can use it in the kernel, for sysmips() and everything else. All we have to be careful about is not to allow DMA accesses to spinlocks. I don't think this is a problem in reality. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Nov 15 12:22:10 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 12:22:00 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:17403 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 12:21:50 -0800 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eAFKJN319524; Wed, 15 Nov 2000 12:19:23 -0800 Message-ID: <3A12F062.5E05CA0B@mvista.com> Date: Wed, 15 Nov 2000 12:21:54 -0800 From: Jun Sun X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i586) X-Accept-Language: en MIME-Version: 1.0 To: "Maciej W. Rozycki" CC: Harald Koerfgen , linux-mips@oss.sgi.com, Ralf Baechle Subject: Re: Build failure for R3000 DECstation References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Maciej W. Rozycki" wrote: > > On Wed, 15 Nov 2000, Harald Koerfgen wrote: > > > On 15-Nov-00 Jun Sun wrote: > > [R3000 UP userland spinlocks] > > > In fact, I don't think you can perform automic operation ONLY based on > > > the knowledge whether a context switch has happened during a specified > > > period. (It should be interesting to see if we can actually "prove" > > > it.) > > > > I doubt this as well, although I'd love to be proven wrong. > > Well, on UP the only events that can break atomicity are exceptions (here > I treat interrupts as exceptions as well) and DMA accesses. I don't think > we do DMA to user space, so this should not be a problem. So if we can > detect an exception occured we may assume an operation failed and retry. > It's not a problem for an exception handler to clobber k0 or k1 upon exit. > I gave more thoughts on this. While your argument sounds plausible, the devil is in "retry" - without a lower-level atomic operation, you cannot "restore" the initial condition and conduct a re-try. Come up with a pseudo code to show I am wrong. > Unfortunately we cannot use this implementation in the userland or we > risk problems when running on SMP systems -- an ISA-I user binary might > very well be run on an ISA-II (or higher) SMP system. But we can use it > in the kernel, for sysmips() and everything else. All we have to be > careful about is not to allow DMA accesses to spinlocks. I don't think > this is a problem in reality. > Let us solve UP first. :-) Jun From owner-linux-mips@oss.sgi.com Wed Nov 15 12:32:19 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 12:32:10 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:53976 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 12:31:54 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id VAA17243; Wed, 15 Nov 2000 21:31:41 +0100 (MET) Date: Wed, 15 Nov 2000 21:31:41 +0100 (MET) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Jun Sun cc: Harald Koerfgen , linux-mips@oss.sgi.com, Ralf Baechle Subject: Re: Build failure for R3000 DECstation In-Reply-To: <3A12EF72.980C8E92@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 15 Nov 2000, Jun Sun wrote: > I did not doubt the non-zero value of k0. I really doubted the > approach: a userland primitive is based on non-documented, > non-guarranteed kernel stack restoring code. Once something changes in > kernel, you will get really obscure bugs. We need not rely on a non-documented behaviour. We may clobber k0 explicitly, e.g.: #define RESTORE_SP_AND_RET \ .set push; \ .set noreorder; \ lw k1, PT_EPC(sp); \ lw sp, PT_R29(sp); \ nor k0, zero, zero; \ jr k1; \ rfe; \ .set pop Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Nov 15 12:32:19 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 12:32:10 -0800 Received: from serv1.is1.u-net.net ([195.102.240.129]:23759 "EHLO serv1.is1.u-net.net") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 12:32:06 -0800 Received: from [213.48.88.191] (helo=zurg) by serv1.is1.u-net.net with smtp (Exim 3.12 #1) id 13w9Dt-0006H9-00; Wed, 15 Nov 2000 20:32:02 +0000 From: "Ian Chilton" To: "Brady Brown" Cc: "Linux-MIPS Mailing List" Subject: RE: egcs 1.0.3a build error? Date: Wed, 15 Nov 2000 20:33:41 -0000 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <3A12F036.40753275@ti.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > Thank you, I tried that and had the same result?? Maybe there are other > CFLAGS that I need to specify? Don't think so...it worked for me, but this was CVS GCC, not 1.0.3a. I have had no such problems with 1.0.3a. > CFLAGS=-O1 humm...I used CFLAGS="-O1" donno what difference the quotes make, if any... > --enable-languages=c c++ I use c,c++ You could also try just --enable-languages=c then using that to compile one with c,c++ I have done that in the past too! > Have you been successful in getting Egcs-1.0.3a-2 to build natively on a > MIPS little endian system? No, big endian. Have compiled on an Indy and an I2 loads of times... Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 15 16:13:10 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 16:13:00 -0800 Received: from u-6.karlsruhe.ipdial.viaginterkom.de ([62.180.20.6]:46597 "EHLO u-6.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 16:12:53 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 15 Nov 2000 08:52:45 +0100 Date: Wed, 15 Nov 2000 08:52:45 +0100 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: Ian Chilton , linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org, Andreas Jaeger Subject: Re: User/Group Problem Message-ID: <20001115085244.A5153@bacchus.dhis.org> References: <20001113231949.B16012@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Tue, Nov 14, 2000 at 03:19:11PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Nov 14, 2000 at 03:19:11PM +0100, Maciej W. Rozycki wrote: > > There is second interpretation of this problem - the address passed to > > mmap is bogus, so this computation needs to be fixed. > > Where is it written mmap() is allowed to fail when a bogus VM address is > passed but MAP_FIXED is not set? I believe mmap() should choose a > different VM address in this case, as long as much enough contiguous VM > space is available anywhere to satisfy the requested length. No argument about that, I do agree. > Surely, map_segment() (see dl-load.c) might call mmap(0, ...) after > mmap(, ...) fails when MAP_FIXED is not set but wouldn't > that be a dirty hack? We'd better fix the kernel. Ld.so isn't linked to the same base address as all other libraries for obscure reasons. Right now dl-machine.h use the constant value of 0x5ffe0000 as the base address which it assumes all libraries to be linked to - and that makes us calculate the wrong base address which we're passing to mmap. So we've got two bugs, not just one. I knew about the ld.so part since Linux/MIPS has shared libs. It's just that this is the first time this bug bites us. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 15 17:28:02 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 17:27:51 -0800 Received: from u-6.karlsruhe.ipdial.viaginterkom.de ([62.180.20.6]:55301 "EHLO u-6.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 17:27:34 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 16 Nov 2000 02:27:10 +0100 Date: Thu, 16 Nov 2000 02:27:10 +0100 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation Message-ID: <20001116022710.E6979@bacchus.dhis.org> References: <20001115024358.A3182@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Wed, Nov 15, 2000 at 12:18:57PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 15, 2000 at 12:18:57PM +0100, Maciej W. Rozycki wrote: > Great! -- I haven't thought of such a solution. I'll prepare some code > and see whether there are no races. It should work fine, indeed. I'm still not completly happy - it's a somewhat hackish solution. I'm thinking about a special file which can be mmaped into the process address space and contains processor specific optimized code. This also has other uses. One that comes to my mind are trampolines. Right now we have to make a syscall to flush the cache. But on the RM7000 some cacheflush operations are available in userspace. I'm sure we can come up with more uses. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 15 17:57:51 2000 Received: by oss.sgi.com id ; Wed, 15 Nov 2000 17:57:41 -0800 Received: from u-6.karlsruhe.ipdial.viaginterkom.de ([62.180.20.6]:56069 "EHLO u-6.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 15 Nov 2000 17:57:19 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 16 Nov 2000 02:57:03 +0100 Date: Thu, 16 Nov 2000 02:57:03 +0100 From: Ralf Baechle To: Ian Chilton Cc: Brady Brown , Linux-MIPS Mailing List Subject: Re: egcs 1.0.3a build error? Message-ID: <20001116025703.F6979@bacchus.dhis.org> References: <3A12F036.40753275@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from ian@ichilton.co.uk on Wed, Nov 15, 2000 at 08:33:41PM -0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 15, 2000 at 08:33:41PM -0000, Ian Chilton wrote: > > Thank you, I tried that and had the same result?? Maybe there are other > > CFLAGS that I need to specify? > > Don't think so...it worked for me, but this was CVS GCC, not 1.0.3a. I have > had no such problems with 1.0.3a. > > > CFLAGS=-O1 > > humm...I used CFLAGS="-O1" > donno what difference the quotes make, if any... No difference. In any case he seems to hit a different problem than the one you're refering to which only happens when using an old gcc suchs as egcs 1.0.3a without optimization for compilation of a fairly recent one. Ralf From owner-linux-mips@oss.sgi.com Thu Nov 16 04:21:54 2000 Received: by oss.sgi.com id ; Thu, 16 Nov 2000 04:21:44 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:13792 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 16 Nov 2000 04:21:17 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id NAA13311; Thu, 16 Nov 2000 13:13:41 +0100 (MET) Date: Thu, 16 Nov 2000 13:13:40 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Ian Chilton , linux-mips@oss.sgi.com, lfs-discuss@linuxfromscratch.org, Andreas Jaeger Subject: Re: User/Group Problem In-Reply-To: <20001115085244.A5153@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 15 Nov 2000, Ralf Baechle wrote: > Ld.so isn't linked to the same base address as all other libraries for > obscure reasons. Right now dl-machine.h use the constant value of 0x5ffe0000 > as the base address which it assumes all libraries to be linked to - and that > makes us calculate the wrong base address which we're passing to mmap. I don't count this as a bug. The ELF spec allows shared objects to be loaded with any load address. In fact it's great we are non-standard here -- this makes catching bugs easier. I've already found and fixed a few bugs in gdb thanks to this difference. > So we've got two bugs, not just one. I knew about the ld.so part since > Linux/MIPS has shared libs. It's just that this is the first time this bug > bites us. I insist there is a kernel bug only. We might change the enforced base address within ld.so one day to be more like other archs, but let's keep it for now -- this really benefits. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Nov 16 05:34:04 2000 Received: by oss.sgi.com id ; Thu, 16 Nov 2000 05:33:53 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:13793 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 16 Nov 2000 05:33:43 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA15837; Thu, 16 Nov 2000 14:23:42 +0100 (MET) Date: Thu, 16 Nov 2000 14:23:41 +0100 (MET) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Jun Sun cc: Harald Koerfgen , linux-mips@oss.sgi.com, Ralf Baechle Subject: Re: Build failure for R3000 DECstation In-Reply-To: <3A12F062.5E05CA0B@mvista.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 15 Nov 2000, Jun Sun wrote: > I gave more thoughts on this. While your argument sounds plausible, the > devil is in "retry" - without a lower-level atomic operation, you cannot > "restore" the initial condition and conduct a re-try. You are right -- it's not that trivial, if at all possible (assuming O(1) memory usage). > Come up with a pseudo code to show I am wrong. I'm thinking -- I'll provide results if I invent something useful. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Nov 16 06:08:44 2000 Received: by oss.sgi.com id ; Thu, 16 Nov 2000 06:08:35 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:46049 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Thu, 16 Nov 2000 06:08:22 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA16404; Thu, 16 Nov 2000 14:41:14 +0100 (MET) Date: Thu, 16 Nov 2000 14:41:13 +0100 (MET) From: "Maciej W. Rozycki" To: Ralf Baechle cc: Harald Koerfgen , linux-mips@oss.sgi.com Subject: Re: Build failure for R3000 DECstation In-Reply-To: <20001116022710.E6979@bacchus.dhis.org> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 16 Nov 2000, Ralf Baechle wrote: > I'm still not completly happy - it's a somewhat hackish solution. I'm > thinking about a special file which can be mmaped into the process address > space and contains processor specific optimized code. This also has other > uses. One that comes to my mind are trampolines. Right now we have to > make a syscall to flush the cache. But on the RM7000 some cacheflush > operations are available in userspace. I'm sure we can come up with more > uses. I don't actually think this is needed. All I worry about are inline functions. They must be fast and work on anything equal or better then the host they were built for. Normal functions are not a problem -- they may be converted to wrappers that call various backends indirectly. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Thu Nov 16 13:15:47 2000 Received: by oss.sgi.com id ; Thu, 16 Nov 2000 13:15:37 -0800 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:14717 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 16 Nov 2000 13:15:30 -0800 Received: from zeus-fddi.americas.sgi.com (zeus-fddi.americas.sgi.com [128.162.8.103]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id NAA09266 for ; Thu, 16 Nov 2000 13:23:18 -0800 (PST) mail_from (jberens@sgi.com) Received: from poppy-e185.americas.sgi.com (poppy.americas.sgi.com [128.162.185.207]) by zeus-fddi.americas.sgi.com (8.9.3/americas-smart-nospam1.1) with ESMTP id PAA7686803 for ; Thu, 16 Nov 2000 15:14:14 -0600 (CST) Received: from jberens.americas.sgi.com (jberens.americas.sgi.com [128.162.186.11]) by poppy-e185.americas.sgi.com (980427.SGI.8.8.8/SGI-server-1.7) with ESMTP id PAA88645 for ; Thu, 16 Nov 2000 15:14:13 -0600 (CST) Date: Thu, 16 Nov 2000 15:10:53 -0600 From: Joe Berens X-Sender: jberens@jberens.americas.sgi.com To: linux-mips@oss.sgi.com Subject: X Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have compiled X on my Indy running linux following the directions found at http://honk.physik.uni-konstanz.de/~agx/mipslinux/x/x.html. When i to startx it seems to start X but no x ever shows up. From /var/log/xdm-errrors: XFree86 Version 4.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 1 July 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.1.100 mips [ELF] (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 15 11:32:55 2000 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "simple layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "SGI GDM17e11" (**) | |-->Device "Newport Graphics" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (--) using VT number 7 (EE) No OS PCI support available (II) v4l driver for Video4Linux (II) Newport: driver for Newport Graphics Card: XL (**) Newport(0): Depth 8, (--) framebuffer bpp 8 (==) Newport(0): Default visual is PseudoColor (==) Newport(0): Using gamma correction (1.0, 1.0, 1.0) xdm error (pid 4268): Hung in XOpenDisplay(:0), aborting xdm error (pid 4268): server open failed for :0, giving up xdm error (pid 4265): Display :0 cannot be opened Any help? Thank you, Joe ___________________________________ Joe Berens SGI Customer Support Center Operating Systems Group Phone: 800-800-4744, Direct: 651-683-3254 Email: jberens@sgi.com ___________________________________ From owner-linux-mips@oss.sgi.com Thu Nov 16 17:16:28 2000 Received: by oss.sgi.com id ; Thu, 16 Nov 2000 17:16:19 -0800 Received: from [206.207.108.63] ([206.207.108.63]:27481 "HELO ridgerun-lx.ridgerun.cxm") by oss.sgi.com with SMTP id ; Thu, 16 Nov 2000 17:16:03 -0800 Received: (qmail 31550 invoked from network); 16 Nov 2000 18:15:51 -0700 Received: from stevej-lx.ridgerun.cxm (HELO ridgerun.com) (stevej@192.168.1.4) by ridgerun-lx.ridgerun.cxm with SMTP; 16 Nov 2000 18:15:51 -0700 Message-ID: <3A1486C7.408C50DE@ridgerun.com> Date: Thu, 16 Nov 2000 18:15:51 -0700 From: Steve Johnson Organization: Ridgerun, Inc. X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.16 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: MIPS config.in NET configuration Content-Type: multipart/mixed; boundary="------------E67C727199CC0F7C045E6927" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------E67C727199CC0F7C045E6927 Content-Type: multipart/alternative; boundary="------------015809693C09D4C35C44B073" --------------015809693C09D4C35C44B073 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hi, I'm trying to add support for a Galileo Tech. EV64120A board, building on Pete Popov's work that's already in CVS. I'm having trouble with the "Network device support" menu when I "make xconfig". If I select "Galileo EV96100 Evaluation board" on the "Machine selection" menu, I can't select PPP support in the "Network device support" menu because the IP22/Decstation/Baget code in arch/mips/config.in eclipses the normal net menu's CONFIG_PPP. Is there a reasonable way to resolve two different environments needing the same variable defined? The same problem exists for CONFIG_SERIAL, which is defined by the Decstation and doesn't let me use the normal character device 16550 UART menu item. Please note that this is only a problem for "make xconfig". "make menuconfig" works correctly and selects one set of responses for network devices based on the machine selection. Is that the solution, that everyone in MIPS uses "make menuconfig"? if [ "$CONFIG_NET" = "y" ]; then mainmenu_option next_comment comment 'Network device support' bool 'Network device support' CONFIG_NETDEVICES if [ "$CONFIG_NETDEVICES" = "y" ]; then if [ "$CONFIG_SGI_IP22" != "y" -a \ "$CONFIG_DECSTATION" != "y" -a \ "$CONFIG_BAGET_MIPS" != "y" ]; then source drivers/net/Config.in if [ "$CONFIG_ATM" = "y" ]; then source drivers/atm/Config.in fi else tristate 'Dummy net driver support' CONFIG_DUMMY tristate 'SLIP (serial line) support' CONFIG_SLIP if [ "$CONFIG_SLIP" != "n" ]; then bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED bool ' Keepalive and linefill' CONFIG_SLIP_SMART fi tristate 'PPP (point-to-point) support' CONFIG_PPP if [ ! "$CONFIG_PPP" = "n" ]; then comment 'CCP compressors for PPP are only built as modules.' fi if [ "$CONFIG_SGI_IP22" = "y" ]; then bool 'SGI Seeq ethernet controller support' CONFIG_SGISEEQ fi if [ "$CONFIG_DECSTATION" = "y" ]; then bool 'DEC LANCE ethernet controller support' CONFIG_DECLANCE fi if [ "$CONFIG_BAGET_MIPS" = "y" ]; then tristate 'Baget AMD LANCE support' CONFIG_BAGETLANCE fi fi fi endmenu fi Steve --------------015809693C09D4C35C44B073 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit Hi,

    I'm trying to add support for a Galileo Tech. EV64120A board, building on Pete Popov's work that's already in CVS.  I'm having trouble with the "Network device support" menu when I "make xconfig".

    If I select "Galileo EV96100 Evaluation board" on the "Machine selection" menu, I can't select PPP support in the "Network device support" menu because the IP22/Decstation/Baget code in arch/mips/config.in eclipses the normal net menu's CONFIG_PPP.  Is there a reasonable way to resolve two different environments needing the same variable defined?

    The same problem exists for CONFIG_SERIAL, which is defined by the Decstation and doesn't let me use the normal character device 16550 UART menu item.

    Please note that this is only a problem for "make xconfig".  "make menuconfig" works correctly and selects one set of responses for network devices based on the machine selection.  Is that the solution, that everyone in MIPS uses "make menuconfig"?

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then

      if [ "$CONFIG_SGI_IP22" != "y" -a \
          "$CONFIG_DECSTATION" != "y" -a \
    "$CONFIG_BAGET_MIPS" != "y" ]; then

  source drivers/net/Config.in

  if [ "$CONFIG_ATM" = "y" ]; then
     source drivers/atm/Config.in
  fi
      else
  tristate 'Dummy net driver support' CONFIG_DUMMY
  tristate 'SLIP (serial line) support' CONFIG_SLIP
  if [ "$CONFIG_SLIP" != "n" ]; then
     bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
     bool ' Keepalive and linefill' CONFIG_SLIP_SMART
  fi
  tristate 'PPP (point-to-point) support' CONFIG_PPP
  if [ ! "$CONFIG_PPP" = "n" ]; then
     comment 'CCP compressors for PPP are only built as modules.'
  fi
         if [ "$CONFIG_SGI_IP22" = "y" ]; then
     bool 'SGI Seeq ethernet controller support' CONFIG_SGISEEQ
  fi
  if [ "$CONFIG_DECSTATION" = "y" ]; then
     bool 'DEC LANCE ethernet controller support' CONFIG_DECLANCE
  fi
  if [ "$CONFIG_BAGET_MIPS" = "y" ]; then
     tristate 'Baget AMD LANCE support' CONFIG_BAGETLANCE
  fi
      fi
   fi
   endmenu
fi
 

    Steve
  --------------015809693C09D4C35C44B073-- --------------E67C727199CC0F7C045E6927 Content-Type: text/x-vcard; charset=us-ascii; name="stevej.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Steve Johnson Content-Disposition: attachment; filename="stevej.vcf" begin:vcard n:Johnson;Steve tel;fax:208-331-2227 tel;work:208-331-2226x11 x-mozilla-html:TRUE url:http://www.ridgerun.com org:RidgeRun, Inc. version:2.1 email;internet:stevej@ridgerun.com title:Senior Kernel Developer adr;quoted-printable:;;RidgeRun, Inc.=0D=0A200 N 4th St, Suite 101 ;Boise;ID;83702;USA x-mozilla-cpt:;27936 fn:Steve Johnson end:vcard --------------E67C727199CC0F7C045E6927-- From owner-linux-mips@oss.sgi.com Thu Nov 16 17:44:59 2000 Received: by oss.sgi.com id ; Thu, 16 Nov 2000 17:44:50 -0800 Received: from gateway-490.mvista.com ([63.192.220.206]:36090 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Thu, 16 Nov 2000 17:44:36 -0800 Received: from mvista.com (IDENT:ppopov@zeus.mvista.com [10.0.0.112]) by hermes.mvista.com (8.11.0/8.11.0) with ESMTP id eAH1fi328800; Thu, 16 Nov 2000 17:41:44 -0800 Message-ID: <3A148E0C.5056F18A@mvista.com> Date: Thu, 16 Nov 2000 17:46:52 -0800 From: Pete Popov Organization: Monta Vista Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17 i586) X-Accept-Language: bg, en MIME-Version: 1.0 To: Steve Johnson , "linux-mips@oss.sgi.com" Subject: RE: MIPS config.in NET configuration Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Steve, > I'm trying to add support for a Galileo Tech. EV64120A board, >building on Pete Popov's work that's already in CVS. I'm having trouble >with the "Network device support" menu when I "make xconfig". xconfig was broken for me the last time I did some powerpc work as well. If you want to be really safe, use "make config". > If I select "Galileo EV96100 Evaluation board" on the "Machine >selection" menu, I can't select PPP support in the "Network device >support" menu because the IP22/Decstation/Baget code in >arch/mips/config.in eclipses the normal net menu's CONFIG_PPP. Is there >a reasonable way to resolve two different environments needing the same >variable defined? > The same problem exists for CONFIG_SERIAL, which is defined by the >Decstation and doesn't let me use the normal character device 16550 UART >menu item. > Please note that this is only a problem for "make xconfig". "make >menuconfig" works correctly and selects one set of responses for network >devices based on the machine selection. Is that the solution, that >everyone in MIPS uses "make menuconfig"? BTW, I hope that by the end of next week, I'll be able to send Ralf the latest patches for the ev96100. It's running pretty well now with the scache enabled, but I found 96100 misconfiguration problems in the sdram decoders/subdecoders. The DEC tulip (with one small patch), serial.c (small patch again) also run fine, as well as the 96100 internal 10/100Mbps controllers. -- Pete Popov MontaVista Software, Inc ppopov@mvista.com From owner-linux-mips@oss.sgi.com Fri Nov 17 01:26:01 2000 Received: by oss.sgi.com id ; Fri, 17 Nov 2000 01:25:52 -0800 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.69]:56082 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Fri, 17 Nov 2000 01:25:30 -0800 Received: from gimli.physik.uni-konstanz.de [134.34.144.85] by gandalf.physik.uni-konstanz.de with esmtp (Exim 3.12 #1 (Debian)) id 13whlq-00066M-00; Fri, 17 Nov 2000 10:25:22 +0100 Received: from agx by gimli.physik.uni-konstanz.de with local (Exim 3.12 #1 (Debian)) id 13whlq-0000rI-00; Fri, 17 Nov 2000 10:25:22 +0100 Date: Fri, 17 Nov 2000 10:25:22 +0100 From: Guido Guenther To: Joe Berens Cc: linux-mips@oss.sgi.com Subject: Re: X Message-ID: <20001117102522.A2972@gimli.physik.uni-konstanz.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from jberens@sgi.com on Thu, Nov 16, 2000 at 03:10:53PM -0600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 16, 2000 at 03:10:53PM -0600, Joe Berens wrote: > Hello, > > I have compiled X on my Indy running linux following the directions found > at http://honk.physik.uni-konstanz.de/~agx/mipslinux/x/x.html. When i to > startx it seems to start X but no x ever shows up. From > /var/log/xdm-errrors: > [..snip..] > Operating System: Linux 2.1.100 mips [ELF] > xdm error (pid 4268): Hung in XOpenDisplay(:0), aborting > xdm error (pid 4268): server open failed for :0, giving up > xdm error (pid 4265): Display :0 cannot be opened I've never seen this kind of error before but the kernel you're using is ancient, probably switching to a more recent one helps (2.2.16 and 2.4.0-test9 work fine for me). What version of glibc are you using? If it is as old as your kernel you won't get anything to work.( I'm using 2.0.6-5lm here). Regards, -- Guido From owner-linux-mips@oss.sgi.com Fri Nov 17 04:58:02 2000 Received: by oss.sgi.com id ; Fri, 17 Nov 2000 04:57:52 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:7441 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Fri, 17 Nov 2000 04:57:29 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id D0EEC7CF8; Fri, 17 Nov 2000 12:57:27 +0000 (GMT) Date: Fri, 17 Nov 2000 12:57:27 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: GCC Version Error Message-ID: <20001117125727.A26459@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Did we ever find a solution to this problem? /usr/bin/ld:libgcc.map:1: parse error in VERSION script collect2: ld returned 1 exit status make[2]: *** [libgcc_s.so] Error 1 make[2]: Leaving directory `/mnt/hd2/lfstmp/gcc-001019/gcc-build/gcc' make[1]: *** [libgcc.a] Error 2 Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Nov 17 10:40:35 2000 Received: by oss.sgi.com id ; Fri, 17 Nov 2000 10:40:25 -0800 Received: from u-248.karlsruhe.ipdial.viaginterkom.de ([62.180.19.248]:11527 "EHLO u-248.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Fri, 17 Nov 2000 10:40:23 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 17 Nov 2000 15:00:44 +0100 Date: Fri, 17 Nov 2000 15:00:44 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com Subject: [owner-linux-mips@oss.sgi.com: BOUNCE linux-mips@oss.sgi.com: global taboo header: /^subject:\s*test\b/i] Message-ID: <20001117150044.E3304@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Forwarding this posting which got delayed by the SPAM & Idiot Filter (TM) ... Ralf From carstenl@mips.com Fri Nov 17 02:58:52 2000 Received: from mx.mips.com ([206.31.31.226]:9462 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Fri, 17 Nov 2000 02:58:38 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id CAA19827 for ; Fri, 17 Nov 2000 02:58:11 -0800 (PST) Received: from copfs01.mips.com (copfs01 [192.168.205.101]) by newman.mips.com (8.9.3/8.9.0) with ESMTP id CAA25129 for ; Fri, 17 Nov 2000 02:58:32 -0800 (PST) Received: from mips.com (copsun17 [192.168.205.27]) by copfs01.mips.com (8.9.1/8.9.0) with ESMTP id LAA03874 for ; Fri, 17 Nov 2000 11:58:19 +0100 (MET) Sender: carstenl@mips.com Message-ID: <3A150F4A.4288529C@mips.com> Date: Fri, 17 Nov 2000 11:58:18 +0100 From: Carsten Langgaard X-Mailer: Mozilla 4.75 [en] (X11; U; SunOS 5.7 sun4u) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Test your system to the limit. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Return-Path: X-Orcpt: rfc822;linux-mips@oss.sgi.com Has anyone try to run Doom or Quake on their MIPS-linux box ? I know it may be of topic, but it is a real good test of one's system and a great demon. So if any one could point me to some sources, it would be great. Another fine test is crashme, has anyone dared try that one ? I have been running it on our 2.2.12 kernel for some time with great success, but I have some problems with the 2.4.0 kernel. Has anyone tried crashme on the latest 2.4.0 kernel ? /Carsten -- _ _ ____ ___ Carsten Langgaard Mailto:carstenl@mips.com |\ /|||___)(___ MIPS Denmark Direct: +45 4486 5527 | \/ ||| ____) Lautrupvang 4B Switch: +45 4486 5555 TECHNOLOGIES 2750 Ballerup Fax...: +45 4486 5556 Denmark http://www.mips.com From owner-linux-mips@oss.sgi.com Fri Nov 17 17:27:47 2000 Received: by oss.sgi.com id ; Fri, 17 Nov 2000 17:27:37 -0800 Received: from gw-us4.philips.com ([63.114.235.90]:18692 "EHLO convert rfc822-to-8bitom.com gw-us4.philips.com") by oss.sgi.com with ESMTP id ; Fri, 17 Nov 2000 17:27:32 -0800 Received: from smtprelay-us2.philips.com (localhost.philips.com [127.0.0.1]) by gw-us4.philips.com with ESMTP id TAA10357; Fri, 17 Nov 2000 19:27:14 -0600 (CST) (envelope-from rajesh.palani@philips.com) From: rajesh.palani@philips.com Received: from smtprelay-nam2.philips.com(167.81.233.16) by gw-us4.philips.com via mwrap (4.0a) id xma010355; Fri, 17 Nov 00 19:27:14 -0600 Received: from AMLMS01.DIAMOND.PHILIPS.COM (amlms01sv1.diamond.philips.com [161.88.79.213]) by smtprelay-us2.philips.com (8.9.3/8.8.5-1.2.2m-19990317) with ESMTP id TAA07906; Fri, 17 Nov 2000 19:27:13 -0600 (CST) Received: by AMLMS01.DIAMOND.PHILIPS.COM (Soft-Switch LMS 4.0) with snapi via AMEC id 0056910008698539; Fri, 17 Nov 2000 19:28:50 -0600 To: , Subject: sysmips syscall Message-ID: <0056910008698539000002L192*@MHS> Date: Fri, 17 Nov 2000 19:28:50 -0600 MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1; name="MEMO 11/17/00 19:26:59" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, The following lines appear in the linuxthreads/sysdeps/mips/pt-machine.h file in version LinuxThreads 2.1.2: TODO: This version makes use of MIPS ISA 2 features. It won't work on ISA 1. These machines will have to take the overhead of a sysmips(MIPS_ATOMIC_SET, ...) syscall which isn't implemented yet correctly. There is however a better solution for R3000 uniprocessor machines possible. My questions are: 1. Is the sysmips syscall implemented correctly yet? 2. What is the better solution for R3000 uniprocessor machines? 3. Does anyone have a patch for LinuxThreads that supports MIPS ISA 1? Thanks and regards, Rajesh From owner-linux-mips@oss.sgi.com Sat Nov 18 04:15:33 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 04:15:23 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:33553 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Sat, 18 Nov 2000 04:15:12 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 771A17CF8; Sat, 18 Nov 2000 12:15:10 +0000 (GMT) Date: Sat, 18 Nov 2000 12:15:10 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Wierd Boot Problem Message-ID: <20001118121510.A28176@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I am currently cross-compiling 2.4 cvs kernels with different versions of GCC, to find out when GCC broke... I now have a few kernels here, all of which boot find on my Indy R4600 However, none of them will boot on my I2. Obtaining /vmlinux from server slinky / Every time I try it, and with which ever kernel I use, the cursor always stops spinning at the same point... If I try a 2.2.14 kernel, it works fine, but when I try a 2.4 kernel (same ones that boot on the Indy), it fails as above. I have had the I2 booted on a 2.4 kernel before, but it was an older 2.4test9 kernel, and it was nativly compiled instead of cross-compiled. Any ideas? Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Sat Nov 18 05:17:54 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 05:17:45 -0800 Received: from u-71.karlsruhe.ipdial.viaginterkom.de ([62.180.19.71]:1544 "EHLO u-71.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sat, 18 Nov 2000 05:17:43 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 18 Nov 2000 11:59:09 +0100 Date: Sat, 18 Nov 2000 11:59:09 +0100 From: Ralf Baechle To: rajesh.palani@philips.com Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips syscall Message-ID: <20001118115909.D8672@bacchus.dhis.org> References: <0056910008698539000002L192*@MHS> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <0056910008698539000002L192*@MHS>; from rajesh.palani@philips.com on Fri, Nov 17, 2000 at 07:28:50PM -0600 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Nov 17, 2000 at 07:28:50PM -0600, rajesh.palani@philips.com wrote: > The following lines appear in the linuxthreads/sysdeps/mips/pt-machine.h file in version > LinuxThreads 2.1.2: > > TODO: This version makes use of MIPS ISA 2 features. It won't > work on ISA 1. These machines will have to take the overhead of > a sysmips(MIPS_ATOMIC_SET, ...) syscall which isn't implemented > yet correctly. There is however a better solution for R3000 > uniprocessor machines possible. > > My questions are: > 1. Is the sysmips syscall implemented correctly yet? Yes. > 2. What is the better solution for R3000 uniprocessor machines? You can base a spinlock implementation on the fact that the register k0 will be left at a value != zero after any exception, also including context switches. Problem: this solution breaks silently on multiproessor systems. > 3. Does anyone have a patch for LinuxThreads that supports MIPS ISA 1? glibc 2.2's pthread will do that out of the box. Ralf From owner-linux-mips@oss.sgi.com Sat Nov 18 05:47:25 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 05:47:05 -0800 Received: from ppp0.ocs.com.au ([203.34.97.3]:53262 "HELO mail.ocs.com.au") by oss.sgi.com with SMTP id ; Sat, 18 Nov 2000 05:46:37 -0800 Received: (qmail 7608 invoked from network); 18 Nov 2000 13:46:20 -0000 Received: from ocs3.ocs-net (192.168.255.3) by mail.ocs.com.au with SMTP; 18 Nov 2000 13:46:19 -0000 X-Mailer: exmh version 2.1.1 10/15/1999 From: Keith Owens To: Ralf Baechle cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips syscall In-reply-to: Your message of "Sat, 18 Nov 2000 11:59:09 BST." <20001118115909.D8672@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Sun, 19 Nov 2000 00:46:19 +1100 Message-ID: <23098.974555179@ocs3.ocs-net> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 18 Nov 2000 11:59:09 +0100, Ralf Baechle wrote: >You can base a spinlock implementation on the fact that the register k0 >will be left at a value != zero after any exception, also including context >switches. > >Problem: this solution breaks silently on multiproessor systems. Use Dekker's algorithm between systems. It requires cache coherent memory but does not need any inter cpu locking mechanisms. http://www.cs.wvu.edu/~jdm/classes/cs356/notes/mutex/Dekker.html describes the algorithm for the two cpu case. It assumes no preemption on each cpu so it has to be modified to handle interrupts. Add a local lock so you are the only code on this processor trying to use Dekker between processors. From owner-linux-mips@oss.sgi.com Sat Nov 18 06:14:15 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 06:14:05 -0800 Received: from u-71.karlsruhe.ipdial.viaginterkom.de ([62.180.19.71]:2312 "EHLO u-71.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sat, 18 Nov 2000 06:13:43 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 18 Nov 2000 15:13:29 +0100 Date: Sat, 18 Nov 2000 15:13:28 +0100 From: Ralf Baechle To: Keith Owens Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: sysmips syscall Message-ID: <20001118151328.B17046@bacchus.dhis.org> References: <20001118115909.D8672@bacchus.dhis.org> <23098.974555179@ocs3.ocs-net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <23098.974555179@ocs3.ocs-net>; from kaos@melbourne.sgi.com on Sun, Nov 19, 2000 at 12:46:19AM +1100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Nov 19, 2000 at 12:46:19AM +1100, Keith Owens wrote: > On Sat, 18 Nov 2000 11:59:09 +0100, > Ralf Baechle wrote: > >You can base a spinlock implementation on the fact that the register k0 > >will be left at a value != zero after any exception, also including context > >switches. > > > >Problem: this solution breaks silently on multiproessor systems. > > Use Dekker's algorithm between systems. It requires cache coherent > memory but does not need any inter cpu locking mechanisms. > > http://www.cs.wvu.edu/~jdm/classes/cs356/notes/mutex/Dekker.html > describes the algorithm for the two cpu case. It assumes no preemption > on each cpu so it has to be modified to handle interrupts. Add a local > lock so you are the only code on this processor trying to use Dekker > between processors. We're talking about a algorithem to implement atomic operations only in userspace. There is Dekker and few improved variants of it. They all got in common that they're performing badly for an increasing number of threads even for the no-contention case. And non-constant memory requirements which would require further changes to glibc. So I consider this whole family of algorithems to be a entirely theoretical construct. Which is why we're thinking about those crude hacks. Ralf From owner-linux-mips@oss.sgi.com Sat Nov 18 06:56:45 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 06:56:35 -0800 Received: from [210.200.192.151] ([210.200.192.151]:33811 "HELO cyber.dreamer.com.tw") by oss.sgi.com with SMTP id ; Sat, 18 Nov 2000 06:56:28 -0800 Received: from 63.52.248.235 (unverified [63.52.248.235]) by cyber.dreamer.com.tw (EMWAC SMTPRS 0.83) with SMTP id ; Sat, 18 Nov 2000 11:14:38 +0800 Message-ID: <0000004e4d37$00005be7$000004a8@63.52.248.235> To: From: McLean@d10.de Subject: Brand New FREE Satellite System Date: Fri, 17 Nov 2000 22:17:27 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing FREE Satellite T.V. System and FREE Installation For a limited time we'll give you this top of the line Digital Satellite System for FREE! We'll even include Free installation. Enjoy over 500 Channels of crystal clear digital picture and cd stereo sound on your FREE Satellite TV System. Why pay for these items in a retail store, when we're giving you the same satellite package for free. Call 888-514-6881 to be Guaranteed Your FREE Satellite Today This Innovative 20" Satellite includes a stereo receiver and an infrared remote. With this FREE offer you will have both Interactive Television Capability and an On Screen Program Guide. This limited time FREE offer is much less than the monthly cost of cable tv. All you have to do is call us to arrange delivery. If you call today, we'll throw in a second receiver for your second T.V. free. Call 888-514-6881 to Begin Surfing through 500 Channels Today! To be removed send email to tcaiom@yahoo.com From owner-linux-mips@oss.sgi.com Sat Nov 18 08:42:46 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 08:42:37 -0800 Received: from [210.59.227.242] ([210.59.227.242]:19722 "HELO smtp02.yuanta.com.tw") by oss.sgi.com with SMTP id ; Sat, 18 Nov 2000 08:42:19 -0800 Received: from 63.52.248.235 (unverified [63.52.248.235]) by smtp02.yuanta.com.tw (EMWAC SMTPRS 0.83) with SMTP id ; Sat, 18 Nov 2000 11:22:00 +0800 Message-ID: <0000004e4d37$00005be7$000004a8@63.52.248.235> To: From: McLean@d10.de Subject: Brand New FREE Satellite System Date: Fri, 17 Nov 2000 22:17:50 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing FREE Satellite T.V. System and FREE Installation For a limited time we'll give you this top of the line Digital Satellite System for FREE! We'll even include Free installation. Enjoy over 500 Channels of crystal clear digital picture and cd stereo sound on your FREE Satellite TV System. Why pay for these items in a retail store, when we're giving you the same satellite package for free. Call 888-514-6881 to be Guaranteed Your FREE Satellite Today This Innovative 20" Satellite includes a stereo receiver and an infrared remote. With this FREE offer you will have both Interactive Television Capability and an On Screen Program Guide. This limited time FREE offer is much less than the monthly cost of cable tv. All you have to do is call us to arrange delivery. If you call today, we'll throw in a second receiver for your second T.V. free. Call 888-514-6881 to Begin Surfing through 500 Channels Today! To be removed send email to tcaiom@yahoo.com From owner-linux-mips@oss.sgi.com Sat Nov 18 09:22:07 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 09:21:46 -0800 Received: from u-248.karlsruhe.ipdial.viaginterkom.de ([62.180.21.248]:11528 "EHLO u-248.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sat, 18 Nov 2000 09:21:31 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 18 Nov 2000 18:21:15 +0100 Date: Sat, 18 Nov 2000 18:21:15 +0100 From: Ralf Baechle To: Harald Koerfgen Cc: linux-cvs@oss.sgi.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: CVS Update@oss.sgi.com: linux Message-ID: <20001118182114.A19710@bacchus.dhis.org> References: <20001118132233Z553804-494+838@oss.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from Harald.Koerfgen@home.ivm.de on Sat, Nov 18, 2000 at 06:06:39PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Nov 18, 2000 at 06:06:39PM +0100, Harald Koerfgen wrote: > On 18-Nov-00 Ralf Baechle wrote: > > CVSROOT: /home/pub/cvs > > Module name: linux > > Changes by: ralf@oss.sgi.com 00/11/18 05:22:32 > > > > Modified files: > > Documentation : Configure.help > > arch/mips : config.in > > arch/mips/mm : r4xx0.c > > > > Log message: > > New configuration option CONFIG_MIPS_UNCACHED. Not yet selectable due > > to the manuals documenting ll/sc operation as undefined for uncached > > memory. > > Wouldn't it make sense then to disable CONFIG_CPU_HAS_LLSC as well? I'm waiting for authoritative answer from silicon guys before I deciede. In the past I ran kernel entirely uncached and they seemed to work even though the documentation made me assume the opposite. Ralf From owner-linux-mips@oss.sgi.com Sat Nov 18 09:26:47 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 09:26:37 -0800 Received: from lightning.swansea.linux.org.uk ([194.168.151.1]:35848 "EHLO the-village.bc.nu") by oss.sgi.com with ESMTP id ; Sat, 18 Nov 2000 09:26:19 -0800 Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 13xBlP-0001tb-00; Sat, 18 Nov 2000 17:26:55 +0000 Subject: Re: sysmips syscall To: kaos@melbourne.sgi.com (Keith Owens) Date: Sat, 18 Nov 2000 17:26:54 +0000 (GMT) Cc: ralf@oss.sgi.com (Ralf Baechle), linux-mips@oss.sgi.com, linux-mips@fnet.fr In-Reply-To: <23098.974555179@ocs3.ocs-net> from "Keith Owens" at Nov 19, 2000 12:46:19 AM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Use Dekker's algorithm between systems. It requires cache coherent > memory but does not need any inter cpu locking mechanisms. Cache coherent and write ordered From owner-linux-mips@oss.sgi.com Sat Nov 18 10:20:46 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 10:20:37 -0800 Received: from pobox.sibyte.com ([208.12.96.20]:57870 "HELO pobox.sibyte.com") by oss.sgi.com with SMTP id ; Sat, 18 Nov 2000 10:20:27 -0800 Received: from baton.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id E2AD0205FA; Sat, 18 Nov 2000 10:20:06 -0800 (PST) Received: from SMTP agent by mail gateway Sat, 18 Nov 2000 10:16:13 -0800 Received: by baton.sibyte.com (Postfix, from userid 1017) id 71ECE56FF; Sat, 18 Nov 2000 10:20:06 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: Ralf Baechle Subject: Re: CVS Update@oss.sgi.com: linux Date: Sat, 18 Nov 2000 10:13:34 -0800 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain Cc: linux-cvs@oss.sgi.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr References: <20001118132233Z553804-494+838@oss.sgi.com> <20001118182114.A19710@bacchus.dhis.org> In-Reply-To: <20001118182114.A19710@bacchus.dhis.org> MIME-Version: 1.0 Message-Id: <0011181020063F.11653@baton.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, 18 Nov 2000, Ralf Baechle wrote: > > Log message: > > New configuration option CONFIG_MIPS_UNCACHED. Not yet selectable due > > to the manuals documenting ll/sc operation as undefined for uncached > > memory. > > > Wouldn't it make sense then to disable CONFIG_CPU_HAS_LLSC as well? > > I'm waiting for authoritative answer from silicon guys before I deciede. > In the past I ran kernel entirely uncached and they seemed to work even > though the documentation made me assume the opposite. > I'd be very, VERY surprised if ll-sc were guaranteed to work in uncached space, for any implementation. It certainly wouldn't in the SB1. The easiest way to implement the ops on a cache-coherent system is to keep track of whether or not you've lost a line in the cache between the ll and the sc. Then, in the sc, you convert the line to dirty (if necessary), do the write, and go on your merry way. Or, if you've lost the line at some point between the ll and the sc, you fail the sc. I've never heard of anyone implementing it in a significantly different manner, on MIPS or on Alpha. To keep track of who's written what in an uncached space would be nightmarish at best, in hardware. Doesn't mean someone hasn't done it, but it would certainly be news to me. -Justin From owner-linux-mips@oss.sgi.com Sat Nov 18 10:33:57 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 10:33:47 -0800 Received: from mx.mips.com ([206.31.31.226]:9091 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Sat, 18 Nov 2000 10:33:41 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id KAA01017; Sat, 18 Nov 2000 10:33:10 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id KAA06647; Sat, 18 Nov 2000 10:33:30 -0800 (PST) Message-ID: <00d201c0518e$87060b20$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Ralf Baechle" , "Harald Koerfgen" Cc: , , References: <20001118132233Z553804-494+838@oss.sgi.com> <20001118182114.A19710@bacchus.dhis.org> Subject: Re: CVS Update@oss.sgi.com: linux Date: Sat, 18 Nov 2000 19:36:41 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > > Log message: > > > New configuration option CONFIG_MIPS_UNCACHED. Not yet selectable due > > > to the manuals documenting ll/sc operation as undefined for uncached > > > memory. > > > > Wouldn't it make sense then to disable CONFIG_CPU_HAS_LLSC as well? > > I'm waiting for authoritative answer from silicon guys before I deciede. > In the past I ran kernel entirely uncached and they seemed to work even > though the documentation made me assume the opposite. We've been discussing this at MIPS, and it's a bit tricky. LL/SC is almost guaranteed not to work uncached in a multiprocessor configuration. In the uniprocessor case, it's not documented to work, but probably would in most "natural" implementations. The whole operation hinges on an invisible flip-flop which is set by an LL and cleared by one of a set of events, which include cache interventions by other CPUs, memory ops by the same CPU, ERETs, etc. So long as the LL flop is set by the LL even uncached, and cleared on ERET regardless of caching, the desired behaviour will be obtained in an uncached uniprocessor. But that's outside the scope of the ISA spec and any MIPS ISA validation suites, and a legal MIPS II/III/IV/V implementation could do otherwise. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Sat Nov 18 17:37:52 2000 Received: by oss.sgi.com id ; Sat, 18 Nov 2000 17:37:42 -0800 Received: from hermes.epita.fr ([194.98.116.10]:6152 "EHLO hermes.epita.fr") by oss.sgi.com with ESMTP id ; Sat, 18 Nov 2000 17:37:35 -0800 Received: from purple42.epx.epita.fr (purple42.epx.epita.fr [10.225.7.1]) by hermes.epita.fr id CAA16930 Sun, 19 Nov 2000 02:36:23 GMT Received: by purple42.epx.epita.fr (Postfix, from userid 501) id 08F483F3B; Sun, 19 Nov 2000 02:42:59 +0100 (CET) Date: Sun, 19 Nov 2000 02:42:59 +0100 From: Thomas Poindessous To: Linux Mips at SGI , port-max@netbsd.org Subject: Decstation 5000/200, status led ? Message-ID: <20001119024259.A1244@purple42.epx.epita.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I have got a digital decstation 5000/200, with a video card, a scsi card, 4 memory cards and no hard drive. I tried to boot it : * with/without video card * with/without scsi card * with/without keybord/mouse plugged * with/without memory card I have a null-cable to my pc, I use minicom and kermit. Each time, I got nothing on my term. And the status leds are set like this: x000 xx00 (x: light off, 0: light on) Is there anyone who have the hardware reference manual for 5000/200 ? I need to know if the problem is from the hardware and which hardware. Thank for your help. my kermit conf: set carrier-watch off set line /dev/ttyS1 set speed 9600 set modem hayes set prompt Kermit@\v(host)> set flow xon/xoff my minicom conf: pu baudrate 9600 pu minit pu mreset pu mdialpre pu mdialsuf pu mdialpre2 pu mdialsuf2 pu mdialpre3 pu mdialsuf3 pu mconnect pu backspace DEL pu rtscts Yes pu xonxoff Yes -- Thomas Poindessous EpX asso GNU/Linux de l'Epita epx@epita.fr && http://www.epita.fr/~epx From owner-linux-mips@oss.sgi.com Sun Nov 19 07:05:30 2000 Received: by oss.sgi.com id ; Sun, 19 Nov 2000 07:05:20 -0800 Received: from smtp.algor.co.uk ([62.254.210.199]:51397 "EHLO kenton.algor.co.uk") by oss.sgi.com with ESMTP id ; Sun, 19 Nov 2000 07:05:12 -0800 Received: from gladsmuir.algor.co.uk (dom@gladsmuir.algor.co.uk [192.168.5.75]) by kenton.algor.co.uk (8.9.3/8.8.8) with ESMTP id PAA15603; Sun, 19 Nov 2000 15:05:05 GMT Received: (from dom@localhost) by gladsmuir.algor.co.uk (8.8.5/8.8.5) id PAA00336; Sun, 19 Nov 2000 15:16:33 GMT Date: Sun, 19 Nov 2000 15:16:33 GMT Message-Id: <200011191516.PAA00336@gladsmuir.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Ralf Baechle Cc: Harald Koerfgen , linux-cvs@oss.sgi.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: CVS Update@oss.sgi.com: linux In-Reply-To: <20001118182114.A19710@bacchus.dhis.org> References: <20001118132233Z553804-494+838@oss.sgi.com> <20001118182114.A19710@bacchus.dhis.org> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle (ralf@oss.sgi.com) writes: > > > New configuration option CONFIG_MIPS_UNCACHED. Not yet > > > selectable due to the manuals documenting ll/sc operation > > > as undefined for uncached memory. > > > > Wouldn't it make sense then to disable CONFIG_CPU_HAS_LLSC as well? > > I'm waiting for authoritative answer from silicon guys before I > deciede. In the past I ran kernel entirely uncached and they seemed > to work even though the documentation made me assume the opposite. ll/sc between CPUs certainly won't work for uncached accesses, since they rely on the cache coherency protocols. On a uniprocessor CPU the ll/sc link is typically broken on any exception. You'd have to try very hard to design the CPU so that it would work any differently for cached and uncached accesses. -- Dominic Sweetman Algorithmics Ltd The Fruit Farm, Ely Road, Chittering, CAMBS CB5 9PH, ENGLAND phone: +44 1223 706200 / fax: +44 1223 706250 / home: +44 20 7226 0032 http://www.algor.co.uk From owner-linux-mips@oss.sgi.com Mon Nov 20 02:22:15 2000 Received: by oss.sgi.com id ; Mon, 20 Nov 2000 02:22:05 -0800 Received: from [203.116.49.131] ([203.116.49.131]:1477 "EHLO convert rfc822-to-8bit as400.etown.com.sg") by oss.sgi.com with ESMTP id ; Mon, 20 Nov 2000 02:21:36 -0800 Received: from buttler-mad.mad.servicom.es ([63.52.247.249]) by as400.etown.com.sg (Lotus Domino Release 5.0.3 (Intl)) with SMTP id 2000111703584656:252 ; Fri, 17 Nov 2000 03:58:46 +0800 Message-Id: From: Lee@cc-srv.baranyanet.hu Subject: Information You Requested Date: Thu, 16 Nov 2000 14:50:23 -0500 To: Elliot@essenet.it X-MIMETrack: Itemize by SMTP Server on etown/etown(Release 5.0.3 (Intl)|21 March 2000) at 11/17/2000 03:58:48 AM, Serialize by Router on etown/etown(Release 5.0.3 (Intl)|21 March 2000) at 11/20/2000 06:20:46 PM MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing You were recently referred to me as someone who was ready for a CHANGE, a financial breakthrough, so I'll get right to the point. I am the one that can help you make $125,000 plus this year from HOME with your computer and phone. This is Not MLM and it IS very REAL. Are you Serious about making $2000 plus per week starting Right Away with a SIMPLE system where customers are contacting you and you do absolutely ZERO selling? Can you follow simple step-by-step instructions and put forth the effort to make this a reality for yourself starting today? If your answer is YES, then we need to talk. I have few positions available on my team and its in my best interest to train you for success. In fact, I'm so sure that I can do so, I'm willing to put my money where my mouth is! Upon accepting you as a member on my team, I will provide you with complete Professional Training and Advertising Assistance to put you immediately on the road to success. No experience necessary.... However you must have two qualities: moderate people skills and a serious desire for a personal and financial change. Take a moment to take the next step by calling me at my Home Office and I will get you the details. 1-800-570-3782 ext 0652 24 Hrs/ 7 Days Prosperous Regards! Lee "Profits are better than wages. Wages make you a living; Profits make you a fortune" - Jim Rohn To be removed send email to socpcf@yahoo.com From owner-linux-mips@oss.sgi.com Mon Nov 20 11:57:06 2000 Received: by oss.sgi.com id ; Mon, 20 Nov 2000 11:56:56 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:22546 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Mon, 20 Nov 2000 11:56:45 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 8C51C7CF5; Mon, 20 Nov 2000 19:56:43 +0000 (GMT) Date: Mon, 20 Nov 2000 19:56:43 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: ICLinux/MIPS v1.0 Released Message-ID: <20001120195643.A31511@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have just released ICLinux/MIPS v1.0. This is a full base system (incl compiler + networking). This is based on Linux-2.2/glibc-2.0.6/egcs-1.0.3a/binutils-2.8.1 Coming soon is ICLinux/MIPS v2.0, which will be based on Linux-2.4/glibc-2.2/gcc 2.97 ICLinux/MIPS is for Mips-Linux Systems, specifically the Indy or the I2 A brief install guide can be seen at: ftp://download.ichilton.co.uk/pub/ichilton/linux-mips/iclinux/INSTALL ----------------------------------------------------------------- Also, please remember to theck the Official #mipslinux web page @ http://linuxmips.ichilton.co.uk ----------------------------------------------------------------- As usual, you use all this stuff at your own risk :-) I'd be interested in knowing if you use ICLinux and your comments. Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | I used up all my sick days, so I'm calling in dead. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Nov 20 19:39:47 2000 Received: by oss.sgi.com id ; Mon, 20 Nov 2000 19:39:28 -0800 Received: from u-194.karlsruhe.ipdial.viaginterkom.de ([62.180.10.194]:5382 "EHLO u-194.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Mon, 20 Nov 2000 19:39:21 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 21 Nov 2000 04:39:03 +0100 Date: Tue, 21 Nov 2000 04:39:03 +0100 From: Ralf Baechle To: Dominic Sweetman Cc: Harald Koerfgen , linux-cvs@oss.sgi.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: CVS Update@oss.sgi.com: linux Message-ID: <20001121043903.A24831@bacchus.dhis.org> References: <20001118132233Z553804-494+838@oss.sgi.com> <20001118182114.A19710@bacchus.dhis.org> <200011191516.PAA00336@gladsmuir.algor.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200011191516.PAA00336@gladsmuir.algor.co.uk>; from dom@algor.co.uk on Sun, Nov 19, 2000 at 03:16:33PM +0000 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Nov 19, 2000 at 03:16:33PM +0000, Dominic Sweetman wrote: > ll/sc between CPUs certainly won't work for uncached accesses, since > they rely on the cache coherency protocols. > > On a uniprocessor CPU the ll/sc link is typically broken on any > exception. You'd have to try very hard to design the CPU so that it > would work any differently for cached and uncached accesses. Ok, so now CONFIG_MIPS_UNCACHED is only selectable for UP kernels. Ralf From owner-linux-mips@oss.sgi.com Wed Nov 22 06:27:31 2000 Received: by oss.sgi.com id ; Wed, 22 Nov 2000 06:27:21 -0800 Received: from [207.81.221.34] ([207.81.221.34]:19514 "EHLO relay") by oss.sgi.com with ESMTP id ; Wed, 22 Nov 2000 06:27:09 -0800 Received: from vcubed.com ([207.81.96.153]) by relay (8.8.7/8.8.7) with ESMTP id JAA32746 for ; Wed, 22 Nov 2000 09:49:17 -0500 Message-ID: <3A1BD888.7FB3C6A6@vcubed.com> Date: Wed, 22 Nov 2000 09:30:32 -0500 From: Dan Aizenstros Organization: V3 Semiconductor X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Multiple copies of pci-dma.c file. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello All, Is there any reason for having multiple copies of the pci-dma.c file in Linux/MIPS. The are all doing basically the same thing. We could have just one copy in the arch/mips/lib directory and have the Makefile build it if CONFIG_PCI is defined. Also they appear to have an error in that they convert the pointer that is returned from the __get_free_pages function call into a KSEG1 address even if the pointer is NULL. Dan Aizenstros Software Engineer V3 Semiconductor Corp. From owner-linux-mips@oss.sgi.com Wed Nov 22 07:57:31 2000 Received: by oss.sgi.com id ; Wed, 22 Nov 2000 07:57:21 -0800 Received: from u-119-10.karlsruhe.ipdial.viaginterkom.de ([62.180.10.119]:14855 "EHLO u-119-10.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 22 Nov 2000 07:57:10 -0800 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 22 Nov 2000 16:56:53 +0100 Date: Wed, 22 Nov 2000 16:56:53 +0100 From: Ralf Baechle To: Dan Aizenstros Cc: linux-mips@oss.sgi.com Subject: Re: Multiple copies of pci-dma.c file. Message-ID: <20001122165653.A6421@bacchus.dhis.org> References: <3A1BD888.7FB3C6A6@vcubed.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A1BD888.7FB3C6A6@vcubed.com>; from dan@vcubed.com on Wed, Nov 22, 2000 at 09:30:32AM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 22, 2000 at 09:30:32AM -0500, Dan Aizenstros wrote: > Is there any reason for having multiple copies of > the pci-dma.c file in Linux/MIPS. The are all > doing basically the same thing. We could have > just one copy in the arch/mips/lib directory > and have the Makefile build it if CONFIG_PCI > is defined. Sounds like a plan, done. Tell me if it breaks something ... Some chipsets have a builtin scatter / gather facility, those may need special variants of pci-dma.c for better support. > Also they appear to have an error in that they > convert the pointer that is returned from the > __get_free_pages function call into a KSEG1 > address even if the pointer is NULL. Fixed. Ralf From owner-linux-mips@oss.sgi.com Thu Nov 23 05:21:36 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 05:21:26 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:29971 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Thu, 23 Nov 2000 05:21:11 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 317197CF5; Thu, 23 Nov 2000 13:21:04 +0000 (GMT) Date: Thu, 23 Nov 2000 13:21:04 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Cc: wesolows@foobazco.org Subject: Another GCC Problemo ? Message-ID: <20001123132104.A6627@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have been busy this week, and have not had chance to compile anything since the weekend. I am trying to use make-cross with current gcc, binutils and linux (no patches except one for gcc from oss,,,,/simple/crossdev/. I am using an older glibc because Keith said current was broken (001027). I however get this: malloc.c:1527: storage size of `arena_key' isn't known make[2]: *** [/crossdev-build/mips-linux/glibc-001027-obj/malloc/malloc.o] Error 1 I tried a different glibc (001116) and it still does it.. I then tried an older binutils, and it still does it.. Another GCC Problem? Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Proofread carefully to see if you any words out. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Nov 23 07:20:46 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 07:20:36 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:32531 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Thu, 23 Nov 2000 07:20:12 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 79FAE7CF5; Thu, 23 Nov 2000 15:20:11 +0000 (GMT) Date: Thu, 23 Nov 2000 15:20:11 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Cc: wesolows@foobazco.org Subject: Re: Another GCC Problemo ? Message-ID: <20001123152011.A6764@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Seems to be a GCC problem...tried an older GCC, and it works.. :( Any ideas how to fix? Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Proofread carefully to see if you any words out. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Nov 23 07:51:16 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 07:51:06 -0800 Received: from [207.81.221.34] ([207.81.221.34]:54370 "EHLO relay") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 07:50:45 -0800 Received: from vcubed.com ([207.81.96.153]) by relay (8.8.7/8.8.7) with ESMTP id LAA15994 for ; Thu, 23 Nov 2000 11:12:52 -0500 Message-ID: <3A1D3DA1.E982879B@vcubed.com> Date: Thu, 23 Nov 2000 10:54:09 -0500 From: Dan Aizenstros Organization: V3 Semiconductor X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Strange messages. Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello All, Recently I upgraded my Linux/MIPS kernel from 2.2.12 to 2.4.0-test9 and I started getting messages like the following: Setting flush to zero for awk. I did not get this message when using a 2.2.12 kernel but I am getting them with a 2.4.0-test9 kernel. The 2.4.0-test9 kernel is based on the code from the snapshot at oss.sgi.com in the following file, /pub/linux/mips/mips-linux/simple/crossdev/src/linux-001027.tar.gz with the patches from the same directory applied. I get the message many times and for different programs during system startup. Has anyone seen this before? Dan Aizenstros Software Engineer V3 Semiconductor Corp. From owner-linux-mips@oss.sgi.com Thu Nov 23 08:26:07 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 08:25:56 -0800 Received: from aux-209-217-49-36.oklahoma.net ([209.217.49.36]:13064 "EHLO proteus.paralogos.com") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 08:25:30 -0800 Received: from Ulysses ([195.154.177.178]) by proteus.paralogos.com (8.9.3/8.9.3) with SMTP id RAA06892; Thu, 23 Nov 2000 17:14:46 +0100 Message-ID: <009d01c0556a$74eda6c0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Dan Aizenstros" , References: <3A1D3DA1.E982879B@vcubed.com> Subject: Re: Strange messages. Date: Thu, 23 Nov 2000 17:28:06 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This really deserves to be in the FAQ. I guess I ought to put a version of this up an a web site somewhere and just point people to the URL: Either Ralf or I end up answering it about once a month. This message occurs when the kernel gets an "unimplemented operation" trap from the FPU, which means that an FP instruction has been issued that the hardware cannot handle on its own. Usually this is a conversion of an extreme value or an operation on a denormalized value. What the OS is supposed to do in this case is to deal with the situation, by killing the process, fixing up the values, or emulating the instruction in software. Setting flush-denormal-to-zero mode of the FPU and replaying the instruction to see if that helps is a slightly shady (in my opinion) hack that Ralf put in as part of a tiny, minimal emulator that handled these exceptions in some versions of MIPS Linux. MIPS later integrated a full IEEE FPU emulator from Algorithmics into the 2.2.12 kernel, but it hasn't yet gone into the 2.3/2.4 repository. So long as all you got was that message, and awk didn't subsequently dump core, you're probably OK. Just don't do any serious numerical programming on the system until the full IEEE support goes in! Kevin K. ----- Original Message ----- From: "Dan Aizenstros" To: Sent: Thursday, November 23, 2000 4:54 PM Subject: Strange messages. > Hello All, > > Recently I upgraded my Linux/MIPS kernel from 2.2.12 to > 2.4.0-test9 and I started getting messages like the following: > > Setting flush to zero for awk. > > I did not get this message when using a 2.2.12 kernel but I am > getting them with a 2.4.0-test9 kernel. > > The 2.4.0-test9 kernel is based on the code from the snapshot > at oss.sgi.com in the following file, > /pub/linux/mips/mips-linux/simple/crossdev/src/linux-001027.tar.gz > with the patches from the same directory applied. > > I get the message many times and for different programs during > system startup. > > Has anyone seen this before? > > Dan Aizenstros > Software Engineer > V3 Semiconductor Corp. > From owner-linux-mips@oss.sgi.com Thu Nov 23 09:29:06 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 09:28:46 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:34579 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Thu, 23 Nov 2000 09:28:22 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 65E157CF5; Thu, 23 Nov 2000 17:28:20 +0000 (GMT) Date: Thu, 23 Nov 2000 17:28:20 +0000 From: Ian Chilton To: Dan Aizenstros Cc: linux-mips@oss.sgi.com Subject: Re: Strange messages. Message-ID: <20001123172820.A6943@woody.ichilton.co.uk> Reply-To: Ian Chilton References: <3A1D3DA1.E982879B@vcubed.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i In-Reply-To: <3A1D3DA1.E982879B@vcubed.com>; from dan@vcubed.com on Thu, Nov 23, 2000 at 10:54:09AM -0500 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > Setting flush to zero for awk. > Has anyone seen this before? I get this with sshd from OpenSSH....I get lots of them on the console...not just at boot time. And, it happens with 2.2.14, not just 2.4test9.... Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Proofread carefully to see if you any words out. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Nov 23 10:27:26 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 10:27:17 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:1284 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Thu, 23 Nov 2000 10:26:57 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id CE4E07CF8; Thu, 23 Nov 2000 18:26:56 +0000 (GMT) Date: Thu, 23 Nov 2000 18:26:56 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Current Kernel Won't Compile Message-ID: <20001123182656.A7054@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.11i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I believe Ralf checked 2.4test10 into CVS last night... I have just tried to compile now, and it won't work :( /crossdev-build/src/linux-001123/include/asm/ptrace.h:65:33: warning: "PTRACE_SETOPTIONS" redefined /crossdev-build/src/linux-001123/include/asm/ptrace.h:18:1: warning: this is the location of the previous definition mips-linux-gcc -D__KERNEL__ -I/crossdev-build/src/linux-001123/include -Wall -Wstrict-prototypes -O2 -fomit-frame-po inter -fno-strict-aliasing -G 0 -mno-abicalls -fno-pic -mcpu=r4600 -mips2 -Wa,--trap -pipe -c -o ptrace.o ptrace.c In file included from /crossdev-build/src/linux-001123/include/linux/ptrace.h:24, from /crossdev-build/src/linux-001123/include/linux/binfmts.h:4, from /crossdev-build/src/linux-001123/include/linux/sched.h:9, from ptrace.c:12: /crossdev-build/src/linux-001123/include/asm/ptrace.h:65:33: warning: "PTRACE_SETOPTIONS" redefined /crossdev-build/src/linux-001123/include/asm/ptrace.h:18:1: warning: this is the location of the previous definition ptrace.c: In function `sys_ptrace': ptrace.c:287: `ret' undeclared (first use in this function) ptrace.c:287: (Each undeclared identifier is reported only once ptrace.c:287: for each function it appears in.) make[1]: *** [ptrace.o] Error 1 make[1]: Leaving directory `/crossdev-build/src/linux-001123/arch/mips/kernel' make: *** [_dir_arch/mips/kernel] Error 2 [ian@slinky:/crossdev-build]$ Building with make-cross.sh and: BINUTILS_VERSION=001123 GCC_VERSION=001019 LIBC_VERSION=001123 LINUX_VERSION=001123 BINUTILS_PATCHES="" GCC_PATCHES="gcc-001023.diff%%0" LIBC_PATCHES="" LINUX_PATCHES="" Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Proofread carefully to see if you any words out. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Nov 23 11:56:47 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 11:56:27 -0800 Received: from relay.planetinternet.be ([194.119.232.24]:8452 "EHLO relay.planetinternet.be") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 11:56:08 -0800 Received: from avalanche.planetinternet.be (avalanche.planetinternet.be [194.119.232.20]) by relay.planetinternet.be (8.9.3/8.9.3) with ESMTP id UAA01803 for ; Thu, 23 Nov 2000 20:56:05 +0100 Received: from localhost (dirk@localhost) by avalanche.planetinternet.be (8.10.1/8.10.1) with ESMTP id eANJu4a29147 for ; Thu, 23 Nov 2000 20:56:05 +0100 Date: Thu, 23 Nov 2000 20:56:04 +0100 (CET) From: Dirk Moerenhout X-Sender: dirk@avalanche.planetinternet.be To: linux-mips@oss.sgi.com Subject: Problem finding the right docs Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I have an Indy on my desk which has a 1GB disk with an inaccessible IRIX on it (whomever installed it is not around anymore and we know of no accounts which we can use to login :-) ). I have a CD-ROM that supposed to be connectable to it but the cable went missing. Now I don't want want the poor thing to stay there as it is now. I've been looking for documentation that can tell me how to install using netboot but I can't seem to find any (The FAQ gets mentioned a few times on some places but never with link so it's a mystery to me where it is). Is it possible to revive the thing booting it over the network without having a CD-ROM drive? If so, does anybody know where I could find some docs on it? Doesn't need to be a step by step explanation but anything is better than nothing. If it's not possible to do it using netboot, is it when I would get a usable cable for the CD-ROM or do I need an accessible IRIX on the thing? If needed I can setup a cross compiler, download several GB, ... I just need to know where to start. If I get the Indy going I'll probably decide to play with Linux on 2 Challenge S's we're going to dump in the next few months. Sorry if this question is answered in the FAQ but during the time I checked sites I only saw "Read the FAQ" but never where it is :-) Dirk Moerenhout ///// System Administrator ///// Planet Internet NV From owner-linux-mips@oss.sgi.com Thu Nov 23 13:00:27 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 13:00:17 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:28308 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 13:00:10 -0800 Received: from scotty.mgnet.de (pD4B89489.dip.t-dialin.net [212.184.148.137]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id WAA06793 for ; Thu, 23 Nov 2000 22:00:10 +0100 (MET) Received: (qmail 2874 invoked from network); 23 Nov 2000 21:00:06 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 23 Nov 2000 21:00:06 -0000 Date: Thu, 23 Nov 2000 22:00:08 +0100 (CET) From: Klaus Naumann To: Dirk Moerenhout cc: linux-mips@oss.sgi.com Subject: Re: Problem finding the right docs In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 23 Nov 2000, Dirk Moerenhout wrote: The HOWTO is at http://oss.sgi.com/mips/mips-howto.html . Also take a look at my Indigo2 HOWTO - it also covers other systems - at http://oss.sgi.com/mips/i2-howto.html . If you then still have questions feel free to ask. Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Thu Nov 23 13:22:37 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 13:22:28 -0800 Received: from [203.42.24.46] ([203.42.24.46]:41488 "EHLO sydis001.grouppsi.com.au") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 13:22:06 -0800 Received: by sydis001.grouppsi.com.au with Internet Mail Service (5.5.2650.21) id ; Fri, 24 Nov 2000 08:25:04 +1100 Message-ID: From: Christopher Martin To: "'linux-mips@oss.sgi.com'" Subject: Linux on an Indy Date: Fri, 24 Nov 2000 08:21:53 +1100 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05593.D8353E40" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05593.D8353E40 Content-Type: text/plain; charset="iso-8859-1" Hello hello hello! I just got my Indy to bootp /vmlinux for the first time! Let merriment reign! I am having some problems getting it to mount root, though, and getting some kernel panics because of it. I'm not currently running Linux on any other machines, but I'm using the Windows 2000 DHCP server to provide the boot info and Cisco's tftp server to serve up the vmlinux file. My vmlinux file is located in the root of my tftp server, with the complete, extracted hardhat-sgi-5.1.tar file, and the same directory (e:\shares\tftproot) exported by Omni NFS server. So, I have configured my BOOTP like this 912 Host Name - indy01 017 Root Path - /e/shares/tftproot 066 Boot Server Host Name - 10.254.0.18 067 Bootfilename - /vmlinux 003 Router - 10.254.0.254 10.254.0.18 is a Windows 2000 server running Cisco's tftp server and Omni NFS server. I also have my domain name, DNS servers, etc defined, but I'm assuming they won't interfere. I have also tried with the 017 Root Path - / and no luck there. Now, with this configuration I get the normal kernel boot, but just after the hard disk info, just as it goes to mount root, I get: < Looking up port of RFC 100003/2 on 10.254.0.18 Looking up port of RFC 100005/1 on 10.254.0.18 Root-NFS: Server returned error -13 while mounting /tftpboot/indy > then it tries to boot off floppy and then it kernel panics. I have also noticed that the error "Fri Nov 24 08:11:28 2000: Failed ( State Error )" is displayed at the end of the tftp /vmlinux file transfer. Anyone got any ideas? I am aware that I should be using a Linux NFS server, but I haven't got a machine to spare to set it up on. Please help! Thanks for any help, Chris Martin ------_=_NextPart_001_01C05593.D8353E40 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Linux on an Indy

Hello hello hello!

I just got my Indy to bootp /vmlinux for the first = time! Let merriment reign!

I am having some problems getting it to mount root, = though, and getting some kernel panics because of it.

I'm not currently running Linux on any other = machines, but I'm using the Windows 2000 DHCP server to provide the = boot info and Cisco's tftp server to serve up the vmlinux = file.

My vmlinux file is located in the root of my tftp = server, with the complete, extracted hardhat-sgi-5.1.tar file, and the = same directory (e:\shares\tftproot) exported by Omni NFS server. So, I = have configured my BOOTP like this

912 Host Name - indy01
017 Root Path - /e/shares/tftproot
066 Boot Server Host Name - 10.254.0.18
067 Bootfilename - /vmlinux
003 Router - 10.254.0.254

10.254.0.18 is a Windows 2000 server running Cisco's = tftp server and Omni NFS server.

I also have my domain name, DNS servers, etc defined, = but I'm assuming they won't interfere. I have also tried with the 017 = Root Path - / and no luck there.

Now, with this configuration I get the normal kernel = boot, but just after the hard disk info, just as it goes to mount root, = I get:

<
Looking up port of RFC 100003/2 on = 10.254.0.18
Looking up port of RFC 100005/1 on = 10.254.0.18
Root-NFS: Server returned error -13 while mounting = /tftpboot/indy
>

then it tries to boot off floppy and then it kernel = panics. I have also noticed that the error "Fri Nov 24 08:11:28 = 2000: Failed ( State Error )" is displayed at the end of the tftp = /vmlinux file transfer.

Anyone got any ideas? I am aware that I should be = using a Linux NFS server, but I haven't got a machine to spare to set = it up on. Please help!

Thanks for any help,

Chris Martin

------_=_NextPart_001_01C05593.D8353E40-- From owner-linux-mips@oss.sgi.com Thu Nov 23 14:01:38 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 14:01:28 -0800 Received: from [207.81.221.34] ([207.81.221.34]:32371 "EHLO relay") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 14:01:11 -0800 Received: from vcubed.com ([207.81.96.153]) by relay (8.8.7/8.8.7) with ESMTP id RAA20861; Thu, 23 Nov 2000 17:23:09 -0500 Message-ID: <3A1D946B.CEF85110@vcubed.com> Date: Thu, 23 Nov 2000 17:04:27 -0500 From: Dan Aizenstros Organization: V3 Semiconductor X-Mailer: Mozilla 4.6 [en] (WinNT; I) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com Subject: Re: Multiple copies of pci-dma.c file. References: <3A1BD888.7FB3C6A6@vcubed.com> <20001122165653.A6421@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello Ralf, Should the dma_cache_inv actually be a dma_cache_wback_inv? Also, the sni directory contains a dma.c which is they same as pci-dma.c and should be removed. Dan Aizenstros Software Engineer V3 Semicondutor Corp. Ralf Baechle wrote: > > On Wed, Nov 22, 2000 at 09:30:32AM -0500, Dan Aizenstros wrote: > > > Is there any reason for having multiple copies of > > the pci-dma.c file in Linux/MIPS. The are all > > doing basically the same thing. We could have > > just one copy in the arch/mips/lib directory > > and have the Makefile build it if CONFIG_PCI > > is defined. > > Sounds like a plan, done. Tell me if it breaks something ... > > Some chipsets have a builtin scatter / gather facility, those may need > special variants of pci-dma.c for better support. > > > Also they appear to have an error in that they > > convert the pointer that is returned from the > > __get_free_pages function call into a KSEG1 > > address even if the pointer is NULL. > > Fixed. > > Ralf From owner-linux-mips@oss.sgi.com Thu Nov 23 17:36:28 2000 Received: by oss.sgi.com id ; Thu, 23 Nov 2000 17:36:18 -0800 Received: from u-214-21.karlsruhe.ipdial.viaginterkom.de ([62.180.21.214]:25348 "EHLO u-214-21.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 23 Nov 2000 17:36:06 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 24 Nov 2000 02:35:45 +0100 Date: Fri, 24 Nov 2000 02:35:45 +0100 From: Ralf Baechle To: Dan Aizenstros Cc: linux-mips@oss.sgi.com Subject: Re: Multiple copies of pci-dma.c file. Message-ID: <20001124023545.A9305@bacchus.dhis.org> References: <3A1BD888.7FB3C6A6@vcubed.com> <20001122165653.A6421@bacchus.dhis.org> <3A1D946B.CEF85110@vcubed.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3A1D946B.CEF85110@vcubed.com>; from dan@vcubed.com on Thu, Nov 23, 2000 at 05:04:27PM -0500 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 23, 2000 at 05:04:27PM -0500, Dan Aizenstros wrote: > Should the dma_cache_inv actually be a dma_cache_wback_inv? Conceptually your right and I've therefore changed the kernel. It wasn't a bug though because the actual implementation was in both cases actually doing a dma_cache_wback_inv. > Also, the sni directory contains a dma.c which is they same as pci-dma.c > and should be removed. ``He's dead, Jim''. Ralf From owner-linux-mips@oss.sgi.com Mon Nov 27 12:36:43 2000 Received: by oss.sgi.com id ; Mon, 27 Nov 2000 12:36:23 -0800 Received: from srvntsxconn3.toc.ixl.com ([216.99.0.139]:15365 "HELO srvntsxconn3.toc.ixl.com") by oss.sgi.com with SMTP id ; Mon, 27 Nov 2000 12:35:59 -0800 Received: from 216.99.0.139 by srvntsxconn3.toc.ixl.com (InterScan E-Mail VirusWall NT); Mon, 27 Nov 2000 15:35:07 -0500 (Eastern Standard Time) Received: by srvntsxconn3.toc.ixl.com with Internet Mail Service (5.5.2650.21) id ; Mon, 27 Nov 2000 15:35:06 -0500 Message-ID: <0A5319EEAF65D411825E00805FBBD8A1209DB0@exchange.clt.ixl.com> From: tmaloney@ixl.com To: linux-mips@oss.sgi.com Subject: off topic timmy Date: Mon, 27 Nov 2000 15:35:20 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing any reason this couldn't be used with a Indy R4600/133? please respond offlist, and thanks. SGI IRIX 6.4 Installation CD Set (8 CD's) for Octane, Onyx, Onyx2 and Origin (200/2000) Includes: SGI 813-0616-002: IRIX 6.4 for Origin, Onyx2, and Octane SGI 813-0617-003: IRIX 6.4 Applications, 8/97 SGI 813-0722-011: IRIX 6.4 Recommended/Required Patches 2/98 SGI 813-0735-001: Octane System Disk Patches, 2/98 SGI 813-0648-002: Octane Demos 1.1 for IRIX 6.4 SGI 813-0543-001: Freeware 2.0 SGI 813-0574-001: R5000 Convert Patch SGI 814-0544-006: Hot Mix 17 Tim Maloney Senior Developer iXL, Inc. 1930 Camden Road, Suite 2070 Charlotte, NC 28203 704 943-7193 phone tmaloney@ixl.com www.ixl.com From owner-linux-mips@oss.sgi.com Mon Nov 27 14:03:33 2000 Received: by oss.sgi.com id ; Mon, 27 Nov 2000 14:03:14 -0800 Received: from mx.mips.com ([206.31.31.226]:48347 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Mon, 27 Nov 2000 14:02:56 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id OAA03618; Mon, 27 Nov 2000 14:02:28 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id OAA16300; Mon, 27 Nov 2000 14:02:47 -0800 (PST) Message-ID: <011e01c058be$420db900$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: , References: <0A5319EEAF65D411825E00805FBBD8A1209DB0@exchange.clt.ixl.com> Subject: Re: off topic timmy Date: Mon, 27 Nov 2000 23:06:10 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Actually, there is a potential reason why it won't work. I don't know about IRIX 6.4, but IRIX 6.3 had distinct kernel, library, and binary builds for desktop (Indy, Indigo2, Challenge S, O2) platforms versus the larger server-class systems like those listed below. The difference was that the "lite" desktop versions in fact ran the CPU in 32-bit mode, while the big-system versions ran full 64-bit. The logic was that the overhead of 64-bit register context on the stack, etc, was too great to be permitted on desktop platforms. For people like myself, who wanted to develop and test CPU benchmark codes on the desktop before launching them on the Origin, this was no kindness. So there is an excellent chance that they "idiot proofed" the release you have so that you can't load it on your Indy. Kevin K. ----- Original Message ----- From: To: Sent: Monday, November 27, 2000 9:35 PM Subject: off topic timmy > any reason this couldn't be used with a Indy R4600/133? please respond > offlist, and thanks. > > SGI IRIX 6.4 Installation CD Set (8 CD's) > for Octane, Onyx, Onyx2 and Origin (200/2000) > Includes: > SGI 813-0616-002: IRIX 6.4 for Origin, Onyx2, and Octane > SGI 813-0617-003: IRIX 6.4 Applications, 8/97 > SGI 813-0722-011: IRIX 6.4 Recommended/Required Patches 2/98 > SGI 813-0735-001: Octane System Disk Patches, 2/98 > SGI 813-0648-002: Octane Demos 1.1 for IRIX 6.4 > SGI 813-0543-001: Freeware 2.0 > SGI 813-0574-001: R5000 Convert Patch > SGI 814-0544-006: Hot Mix 17 > > > > Tim Maloney > Senior Developer > iXL, Inc. > 1930 Camden Road, Suite 2070 > Charlotte, NC 28203 > 704 943-7193 phone > tmaloney@ixl.com > www.ixl.com > From owner-linux-mips@oss.sgi.com Tue Nov 28 12:38:06 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 12:37:57 -0800 Received: from u-77-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.77]:23045 "EHLO u-77-18.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 28 Nov 2000 12:37:44 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Tue, 28 Nov 2000 13:06:19 +0100 Date: Tue, 28 Nov 2000 13:06:19 +0100 From: Ralf Baechle To: "H . J . Lu" Cc: Nick Clifton , drepper@cygnus.com, binutils@sources.redhat.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Update readelf to know about the new ELF constants Message-ID: <20001128130618.A27204@bacchus.dhis.org> References: <200011271938.LAA19423@elmo.cygnus.com> <20001127122028.A20242@valinux.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001127122028.A20242@valinux.com>; from hjl@valinux.com on Mon, Nov 27, 2000 at 12:20:28PM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Nov 27, 2000 at 12:20:28PM -0800, H . J . Lu wrote: > EM_MIPS_RS3_LE 10 MIPS RS3000 Little-endian I don't know where you got this constant's name from, it's name is EM_MIPS_RS4_BE (MIPS R4000 big endian) in all literature and header files I've seen. RS3000 series from MIPS was a workstation series of the former Mips Computer Systems, Inc. not a processor. The constant is probably no longer in use - if it ever has been. it's only use I've ever seen is in tools that read ELF but never in tools that write ELF or in existing ELF files. Cc'ed to the Linux/MIPS mailing lists; maybe the oldtimers there can comment. Ralf From owner-linux-mips@oss.sgi.com Tue Nov 28 12:47:16 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 12:47:06 -0800 Received: from runyon.cygnus.com ([205.180.230.5]:12188 "EHLO cygnus.com") by oss.sgi.com with ESMTP id ; Tue, 28 Nov 2000 12:46:55 -0800 Received: from otr.mynet (dialin-sv-02.cygnus.com [205.180.231.52]) by runyon.cygnus.com (8.8.7-cygnus/8.8.7) with ESMTP id MAA26695; Tue, 28 Nov 2000 12:46:16 -0800 (PST) Received: by otr.mynet (Postfix, from userid 500) id F0F8A30BD; Tue, 28 Nov 2000 12:46:08 -0800 (PST) To: Ralf Baechle Cc: "H . J . Lu" , Nick Clifton , binutils@sources.redhat.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Update readelf to know about the new ELF constants References: <200011271938.LAA19423@elmo.cygnus.com> <20001127122028.A20242@valinux.com> <20001128130618.A27204@bacchus.dhis.org> Reply-To: drepper@cygnus.com (Ulrich Drepper) X-fingerprint: BE 3B 21 04 BC 77 AC F0 61 92 E4 CB AC DD B9 5A From: Ulrich Drepper Date: 28 Nov 2000 12:46:08 -0800 In-Reply-To: Ralf Baechle's message of "Tue, 28 Nov 2000 13:06:19 +0100" Message-ID: Lines: 16 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle writes: > > EM_MIPS_RS3_LE 10 MIPS RS3000 Little-endian > > I don't know where you got this constant's name from, it's name is > EM_MIPS_RS4_BE (MIPS R4000 big endian) in all literature and header files > I've seen. RS3000 series from MIPS was a workstation series of the former > Mips Computer Systems, Inc. not a processor. This is the name in the current ABI specs. If it's changed then on request of somebody who registered it. -- ---------------. ,-. 1325 Chesapeake Terrace Ulrich Drepper \ ,-------------------' \ Sunnyvale, CA 94089 USA Red Hat `--' drepper at redhat.com `------------------------ From owner-linux-mips@oss.sgi.com Tue Nov 28 12:48:36 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 12:48:26 -0800 Received: from runyon.cygnus.com ([205.180.230.5]:19612 "EHLO cygnus.com") by oss.sgi.com with ESMTP id ; Tue, 28 Nov 2000 12:48:23 -0800 Received: from elmo.cygnus.com (elmo.cygnus.com [205.180.230.137]) by runyon.cygnus.com (8.8.7-cygnus/8.8.7) with ESMTP id MAA27049; Tue, 28 Nov 2000 12:48:20 -0800 (PST) Received: (nickc@localhost) by elmo.cygnus.com (8.9.3/8.6.4) id MAA08884; Tue, 28 Nov 2000 12:48:20 -0800 Date: Tue, 28 Nov 2000 12:48:20 -0800 Message-Id: <200011282048.MAA08884@elmo.cygnus.com> X-Authentication-Warning: elmo.cygnus.com: nickc set sender to nickc@redhat.com using -f From: Nick Clifton To: ralf@uni-koblenz.de CC: hjl@valinux.com, drepper@cygnus.com, binutils@sources.redhat.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Update readelf to know about the new ELF constants Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Ralf, : > EM_MIPS_RS3_LE 10 MIPS RS3000 Little-endian : : I don't know where you got this constant's name from, it's name is : EM_MIPS_RS4_BE (MIPS R4000 big endian) in all literature and header files : I've seen. RS3000 series from MIPS was a workstation series of the former : Mips Computer Systems, Inc. not a processor. : : The constant is probably no longer in use - if it ever has been. it's only : use I've ever seen is in tools that read ELF but never in tools that write : ELF or in existing ELF files. Just to add a note that in the sources the entry actually looks like this: #define EM_MIPS_RS4_BE 10 /* MIPS R4000 big-endian */ /* Depreciated */ #define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian (Oct 4 1999 Draft)*/ /* Depreciated */ Cheers Nick From owner-linux-mips@oss.sgi.com Tue Nov 28 16:14:47 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 16:14:37 -0800 Received: from NS.CenSoft.COM ([208.219.23.2]:61199 "EHLO ns.centurysoftware.com") by oss.sgi.com with ESMTP id ; Tue, 28 Nov 2000 16:14:12 -0800 Received: from censoft.com (IDENT:jordanc@cen94.censoft.com [208.219.23.94]) by ns.centurysoftware.com (8.9.3/8.9.3) with ESMTP id SAA06943 for ; Tue, 28 Nov 2000 18:28:31 -0700 (MST) Message-ID: <3A244A2C.5C648B27@censoft.com> Date: Tue, 28 Nov 2000 17:13:32 -0700 From: Jordan Crouse Organization: Century Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: DNS Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Has anyone encountered peculiar happenings with the 2.0.7 glibc and resolving names via DNS? It is simply *NOT* going out to the specifiec nameserver (verified via line sniffer), even though /etc/resolv.conf is present and correct. Any lookups with the /etc/hosts file work great, its just when I try to go out on the network. Has anyone noticed any strangeness with this???? Jordan From owner-linux-mips@oss.sgi.com Tue Nov 28 17:55:17 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 17:55:08 -0800 Received: from pobox.sibyte.com ([208.12.96.20]:33284 "HELO pobox.sibyte.com") by oss.sgi.com with SMTP id ; Tue, 28 Nov 2000 17:54:44 -0800 Received: from baton.sibyte.com (moat.sibyte.com [208.12.96.21]) by pobox.sibyte.com (Postfix) with SMTP id D469D205FA for ; Tue, 28 Nov 2000 17:54:38 -0800 (PST) Received: from SMTP agent by mail gateway Tue, 28 Nov 2000 17:50:16 -0800 Received: by baton.sibyte.com (Postfix, from userid 1017) id 2B9F25703; Tue, 28 Nov 2000 17:54:23 -0800 (PST) From: Justin Carlson Reply-To: carlson@sibyte.com Organization: Sibyte To: linux-mips@oss.sgi.com Subject: Boot ordering quandry for time_init() Date: Tue, 28 Nov 2000 17:38:56 -0800 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <0011281754234M.11653@baton.sibyte.com> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Looking for some advice from some mips boot gurus. I'm bringing up an SB1/SB1250 port of the mips/ arch tree. In particular, I'm in time_init() bringing up the general purpose timer that's going to be used for the 100Hz clock. The interrupt seems to be the rub. I've basically copied the request_irq() code from other ports, but it uses kmalloc(), which I can't use at this point in the boot sequence since we haven't yet initialized the allocator (I believe it's done in mem_init()? escapes me at the moment). The 4k way around this is to hook its timer interrupt handling routing up directly to the interrupt handling stub in indyIRQ.S. This certainly works, but seems somewhat messy to me in that it's a special case provided only to avoid ordering constraints. I could hack request_irq to use the boot memory allocator than reallocate properly after kmalloc is available, but this is even worse in terms of added complexity. Anyone know a "better" way to do this that I'm missing? Thanks, Justin ------ Justin Carlson carlson@sibyte.com From owner-linux-mips@oss.sgi.com Tue Nov 28 21:41:59 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 21:41:39 -0800 Received: from c461218-a.frmt1.sfba.home.com ([24.1.69.78]:30217 "EHLO gateway.junsun.net") by oss.sgi.com with ESMTP id ; Tue, 28 Nov 2000 21:41:12 -0800 Received: (from jsun@localhost) by gateway.junsun.net (8.9.3/8.9.3) id VAA09889; Tue, 28 Nov 2000 21:41:11 -0800 Date: Tue, 28 Nov 2000 21:41:11 -0800 From: Jun Sun To: linux-mips@oss.sgi.com Subject: cross-compile tools made easy ... Message-ID: <20001128214111.B9875@gateway.junsun.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3us Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I found myself building cross-compile toolchains a lot recently. So I spent sometime and wrote a script to do the whole darn thing in one shot. If you want to build your own cross-compile tools, you can save some effort by just getting the tar balls and then typing "build". It is not too much different from what is in Ralf's "Linux MIPS HOW-TO" cross-compile section. But the tarball offers some convenience by having all the sources and patches put together and all configurations, options lumped in one file. You can find two tar balls at linux.junsun.net: mips-xtool-1.1.tar.gz binutils 2.8.1 + egcs 1.1.2 + glibc 2.0.6 (Thanks to Keith Wesolows for the glibc fix with egcs 1.1.2) mips-xtool-0.1.tar.gz binutils 2.8.1 + egcs 1.0.3a + glibc 2.0.6 I did some minimal tests with kernel and building a couple of packages, and would very much like to know if you have any problems (Yes, that is the purpose. :-0) Enjoy! Jun From owner-linux-mips@oss.sgi.com Tue Nov 28 23:28:20 2000 Received: by oss.sgi.com id ; Tue, 28 Nov 2000 23:28:00 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:10228 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Tue, 28 Nov 2000 23:27:28 -0800 Received: from scotty.mgnet.de (p3E9B8C22.dip.t-dialin.net [62.155.140.34]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id IAA03315 for ; Wed, 29 Nov 2000 08:27:28 +0100 (MET) Received: (qmail 24328 invoked from network); 29 Nov 2000 07:27:24 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 29 Nov 2000 07:27:24 -0000 Date: Wed, 29 Nov 2000 08:27:25 +0100 (CET) From: Klaus Naumann To: Jordan Crouse cc: linux-mips@oss.sgi.com Subject: Re: DNS In-Reply-To: <3A244A2C.5C648B27@censoft.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 28 Nov 2000, Jordan Crouse wrote: > Has anyone encountered peculiar happenings with the 2.0.7 glibc and Please don't use glibc 2.0.7 . A lot of ppl (including me) have found out, that it doesn't work. HTH, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Wed Nov 29 04:33:50 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 04:33:40 -0800 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:12777 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 04:33:18 -0800 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id NAA15886; Wed, 29 Nov 2000 13:10:58 +0100 (MET) Date: Wed, 29 Nov 2000 13:10:58 +0100 (MET) From: "Maciej W. Rozycki" To: Ulrich Drepper cc: Ralf Baechle , "H . J . Lu" , Nick Clifton , binutils@sources.redhat.com, linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: Re: Update readelf to know about the new ELF constants In-Reply-To: Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 28 Nov 2000, Ulrich Drepper wrote: > > > EM_MIPS_RS3_LE 10 MIPS RS3000 Little-endian > > > > I don't know where you got this constant's name from, it's name is > > EM_MIPS_RS4_BE (MIPS R4000 big endian) in all literature and header files > > I've seen. RS3000 series from MIPS was a workstation series of the former > > Mips Computer Systems, Inc. not a processor. > > This is the name in the current ABI specs. If it's changed then on > request of somebody who registered it. Well, I would only add the name should probably be EM_MIPS_R3_LE (and ditto the comment). We might actually use it for mipsel-linux especially as the ABI explicitly states EM_MIPS is for big endian machines but I'm not sure it's worth bothering as the endianness is specified independently. I believe all software involved should handle it well -- I recall Linux, glibc, binutils, modutils all handle both tags fine. It's just BFD that does not generate EM_MIPS_R3_LE. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Nov 29 05:34:51 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 05:34:41 -0800 Received: from mail.netunlimited.net ([208.128.132.4]:22534 "EHLO mail.netunlimited.net") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 05:34:24 -0800 Received: from localhost (jesse@localhost) by mail.netunlimited.net (8.9.3/8.9.3) with ESMTP id IAA04527 for ; Wed, 29 Nov 2000 08:35:37 -0500 Date: Wed, 29 Nov 2000 08:35:37 -0500 (EST) From: Jesse Dyson X-Sender: jesse@mail.netunlimited.net To: linux-mips@oss.sgi.com Subject: Kernel Boot Hard Locks Indigo 2 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I have an Indigo 2 which I am trying to load the debian linux port (or any port that will work actually). I have been able to successfully configure BOOTP,TFTP, and NFS so that the machine will boot with BOOTP (per http://oss.sgi.com/mips/i2-howto.html). However, after the kernel has loaded (I assume into RAM from the image--sorry newbie), the machine hard locks. Any help would be greatly appreciated. Thank you for your time. Thanks, Jesse Dyson From owner-linux-mips@oss.sgi.com Wed Nov 29 05:47:20 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 05:47:01 -0800 Received: from dragon.appliedmicro.ns.ca ([24.222.12.66]:7187 "EHLO appliedmicro.ns.ca") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 05:46:33 -0800 Received: by dragon.appliedmicro.ns.ca id <7303>; Wed, 29 Nov 2000 09:41:45 -0400 To: linux-mips@oss.sgi.com Cc: chris@debian.org Subject: Re: cross-compile tools made easy ... Message-Id: <00Nov29.094145ast.7303@dragon.appliedmicro.ns.ca> References: <20001128214111.B9875@gateway.junsun.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20001128214111.B9875@gateway.junsun.net>; from jsun@junsun.net on Wed, Nov 29, 2000 at 01:37:21AM -0400 From: fifield@amirix.com (Jamie Fifield) Date: Wed, 29 Nov 2000 09:41:43 -0400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On that vein. I've got a trvial patch against the binutils in Debian (woody) for a cross binutils for big endian mips. jamie:~$ dpkg -s binutils-mips Package: binutils-mips Status: install ok installed Priority: extra Section: devel Installed-Size: 6364 Maintainer: Christopher C. Chimelis Source: binutils Version: 2.10.1.0.2-1 Suggests: binutils (= 2.10.1.0.2-1) Description: Binary utilities that support MIPS (Big Endian) targets. The programs in this package are used to manipulate binary and object files that may have been created on the MIPS (Big Endian) architecture. This package is primarily for MIPS developers and cross-compilers and is not needed by normal users or developers. My version is compiled against glibc 2.1.3, so YMMV against 2.2. Chris: Any chance I could persuade you to upload a binutils-mips to Woody? :) Patch is below (and this patch does not build a mips target by default, you still need to do ./debian/rules TARGET=mips binary-cross). diff -uNr binutils-2.10.1.0.2/debian/control binutils-2.10.1.0.2-mips/debian/control --- binutils-2.10.1.0.2/debian/control Wed Nov 29 09:39:07 2000 +++ binutils-2.10.1.0.2-mips/debian/control Tue Nov 28 09:21:58 2000 @@ -85,6 +85,17 @@ This package is primarily for MIPS developers and cross-compilers and is not needed by normal users or developers. +Package: binutils-mips +Section: devel +Architecture: any +Priority: extra +Suggests: binutils (= ${Source-Version}) +Description: Binary utilities that support MIPS (Big Endian) targets. + The programs in this package are used to manipulate binary and object + files that may have been created on the MIPS (Big Endian) architecture. + This package is primarily for MIPS developers and cross-compilers and is + not needed by normal users or developers. + Package: binutils-avr Section: devel Architecture: any diff -uNr binutils-2.10.1.0.2/debian/rules binutils-2.10.1.0.2-mips/debian/rules --- binutils-2.10.1.0.2/debian/rules Wed Nov 29 09:39:07 2000 +++ binutils-2.10.1.0.2-mips/debian/rules Tue Nov 28 09:23:15 2000 @@ -74,7 +74,7 @@ # debian/control for each of these. For example, the cross binutils package # for powerpc is called binutils-powerpc. # -ALL_TARGETS = avr powerpc arm m68k mipsel +ALL_TARGETS = avr powerpc arm m68k mipsel mips # Targets NOT to build for. This is the set difference ALL_TARGETS - TARGETS # On Wed, Nov 29, 2000 at 01:37:21AM -0400, Jun Sun wrote: > > I found myself building cross-compile toolchains a lot recently. So I > spent sometime and wrote a script to do the whole darn thing in one shot. > > If you want to build your own cross-compile tools, you can save some > effort by just getting the tar balls and then typing "build". > > It is not too much different from what is in Ralf's "Linux MIPS HOW-TO" > cross-compile section. But the tarball offers some convenience by having > all the sources and patches put together and all configurations, options > lumped in one file. > > You can find two tar balls at linux.junsun.net: > > mips-xtool-1.1.tar.gz > binutils 2.8.1 + egcs 1.1.2 + glibc 2.0.6 > (Thanks to Keith Wesolows for the glibc fix with egcs 1.1.2) > > mips-xtool-0.1.tar.gz > binutils 2.8.1 + egcs 1.0.3a + glibc 2.0.6 > > > I did some minimal tests with kernel and building a couple of packages, > and would very much like to know if you have any problems (Yes, that is > the purpose. :-0) > > Enjoy! > > Jun -- Jamie Fifield Software Designer Jamie.Fifield@amirix.com AMIRIX Systems Inc. http://www.amirix.com/ Embedded Debian Project http://www.emdebian.org/ 77 Chain Lake Drive 902-450-1700 x247 (Phone) Halifax, N.S. B3S 1E1 902-450-1704 (FAX) From owner-linux-mips@oss.sgi.com Wed Nov 29 06:03:51 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 06:03:30 -0800 Received: from adsl-61-8-131.mia.bellsouth.net ([208.61.8.131]:50961 "EHLO spawn.hockeyfiend.com") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 06:03:05 -0800 Received: from localhost ([127.0.0.1] ident=chris) by spawn.hockeyfiend.com with esmtp (Exim 3.16 #1 (Debian)) id 1417nu-0005zO-00; Wed, 29 Nov 2000 09:01:46 -0500 Date: Wed, 29 Nov 2000 09:01:40 -0500 (EST) From: "Christopher C. Chimelis" X-Sender: chris@spawn.hockeyfiend.com To: Jamie Fifield cc: linux-mips@oss.sgi.com Subject: Re: cross-compile tools made easy ... In-Reply-To: <00Nov29.094316ast.7303@dragon.appliedmicro.ns.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 29 Nov 2000, Jamie Fifield wrote: > On that vein. I've got a trvial patch against the binutils in Debian (woody) > for a cross binutils for big endian mips. > > jamie:~$ dpkg -s binutils-mips > Package: binutils-mips > Status: install ok installed > Priority: extra > Section: devel > Installed-Size: 6364 > Maintainer: Christopher C. Chimelis > Source: binutils > Version: 2.10.1.0.2-1 > Suggests: binutils (= 2.10.1.0.2-1) > Description: Binary utilities that support MIPS (Big Endian) targets. > The programs in this package are used to manipulate binary and object > files that may have been created on the MIPS (Big Endian) architecture. > This package is primarily for MIPS developers and cross-compilers and is > not needed by normal users or developers. > > > My version is compiled against glibc 2.1.3, so YMMV against 2.2. > > Chris: Any chance I could persuade you to upload a binutils-mips to Woody? :) Ok...I'll consider it more when I return (getting on a plane in an hour). Sorry for the brevity, but I'm in travel mode already :-P C From owner-linux-mips@oss.sgi.com Wed Nov 29 06:30:11 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 06:30:01 -0800 Received: from [166.70.178.116] ([166.70.178.116]:52204 "EHLO home.knm.org") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 06:29:35 -0800 Received: (from mark@localhost) by home.knm.org (8.9.3/8.9.3) id HAA11695; Wed, 29 Nov 2000 07:29:22 -0700 Date: Wed, 29 Nov 2000 07:29:22 -0700 Message-Id: <200011291429.HAA11695@home.knm.org> X-Authentication-Warning: home.knm.org: mark set sender to mark@home.knm.org using -f From: Mark Lehrer To: spock@mgnet.de CC: jordanc@Censoft.com, linux-mips@oss.sgi.com In-reply-to: (message from Klaus Naumann on Wed, 29 Nov 2000 08:27:25 +0100 (CET)) Subject: Re: DNS References: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Has anyone encountered peculiar happenings with the 2.0.7 glibc and Please don't use glibc 2.0.7 . A lot of ppl (including me) have found out, that it doesn't work. What is the best version to use, and where could I download it? Is there a site that is archiving pre-compiled binaries? Thanks! Mark From owner-linux-mips@oss.sgi.com Wed Nov 29 06:54:11 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 06:53:51 -0800 Received: from NS.CenSoft.COM ([208.219.23.2]:26642 "EHLO ns.centurysoftware.com") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 06:53:35 -0800 Received: from censoft.com (IDENT:jordanc@cen94.censoft.com [208.219.23.94]) by ns.centurysoftware.com (8.9.3/8.9.3) with ESMTP id JAA12249; Wed, 29 Nov 2000 09:07:57 -0700 (MST) Message-ID: <3A251846.663BD300@censoft.com> Date: Wed, 29 Nov 2000 07:52:54 -0700 From: Jordan Crouse Organization: Century Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.17 i686) X-Accept-Language: en MIME-Version: 1.0 To: Klaus Naumann CC: linux-mips@oss.sgi.com Subject: Re: DNS References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Actually, thanks to the hard work of Mike Klar and the boys at SuSE, I have been able to track down a decently working copy of the libc 2.0.7, which I have compiled for a VR4122. In fact, until I hit this DNS problem, it has been working without a hitch, including pthreads and some other fairly complicated concepts. Jordan Klaus Naumann wrote: > > On Tue, 28 Nov 2000, Jordan Crouse wrote: > > > Has anyone encountered peculiar happenings with the 2.0.7 glibc and > > Please don't use glibc 2.0.7 . A lot of ppl (including me) have found out, > that it doesn't work. > > HTH, Klaus > > -- > Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) > Nickname : Spock | Org.: Mad Guys Network > Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) > PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Wed Nov 29 09:18:02 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 09:17:42 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:1031 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 29 Nov 2000 09:17:12 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 061127CD8; Wed, 29 Nov 2000 17:17:09 +0000 (GMT) Date: Wed, 29 Nov 2000 17:17:09 +0000 From: Ian Chilton To: Jesse Dyson Cc: linux-mips@oss.sgi.com Subject: Re: Kernel Boot Hard Locks Indigo 2 Message-ID: <20001129171709.A21825@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.12i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > However, after the kernel has loaded the machine hard locks. Where did you get the kernel from? We have a known issue with the CVS versions of GCC....it seems that when you compile a 2.4 kernel with this, it works on the Indy, but won't boot on the I2...it hangs when initialising the serial console. Compiling the same kernel with egcs-1.1.2 works OK on both the Indy and I2... You can get known working kernels for the Indy and I2 in: ftp://download.ichilton.co.uk/pub/ichilton/linux-mips/kernels) (or http://download.ichilton.co.uk/linux-mips/kernels/) For 2.2.14, there are separate kernels for the I2 and Indy (the I2 one has EISA enabled). For 2.4-test11, the same kernel works on both. Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Proofread carefully to see if you any words out. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 29 09:24:03 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 09:23:43 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:2055 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 29 Nov 2000 09:23:38 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id 37DD57CD8; Wed, 29 Nov 2000 17:23:36 +0000 (GMT) Date: Wed, 29 Nov 2000 17:23:36 +0000 From: Ian Chilton To: linux-mips@oss.sgi.com Subject: Re: DNS Message-ID: <20001129172336.B21863@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.12i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > What is the best version to use, and where could I download it? Is > there a site that is archiving pre-compiled binaries? I have found 2.0.6 to be ok, and am currently working on 2.2 I think I got 2.0.6 from the gnu site, and used patches from oss.sgi.com/pub/linux/mips, but I have them for download. ftp://download.ichilton.co.uk/pub/ichilton/linux-mips or http://download.ichilton.co.uk/linux-mips You will find them in the toolchains directory under v1 and v2: v1 = glibc 2.0.6, egcs 1.0.3a, binutils 2.8.1, kernel 2.2.14 v2 = glibc 2.2, gcc 2.97, binutils 2.10.91, kernel 2.4 Also, if all else fails, check the links page...there are loads of sites with Linux/MIPS stuff on :) http://linuxmips.ichilton.co.uk Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Proofread carefully to see if you any words out. | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 29 11:18:07 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 11:17:57 -0800 Received: from woody.ichilton.co.uk ([216.29.174.40]:9991 "HELO woody.ichilton.co.uk") by oss.sgi.com with SMTP id ; Wed, 29 Nov 2000 11:17:33 -0800 Received: by woody.ichilton.co.uk (Postfix, from userid 0) id EB44A7CD8; Wed, 29 Nov 2000 19:17:30 +0000 (GMT) Date: Wed, 29 Nov 2000 19:17:30 +0000 From: Ian Chilton To: Jesse Dyson Cc: linux-mips@oss.sgi.com Subject: Re: Kernel Boot Hard Locks Indigo 2 Message-ID: <20001129191730.A22085@woody.ichilton.co.uk> Reply-To: Ian Chilton Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.3.12i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > Mr. Chilton, Ian! > Thank you so much for your help. No problem! > I believe I need an ecoff version of the > kernel (not sure exactly what that means--forgive me) I am not too sure either...all I know is some proms require this doing... I don't have any ecoff kernels handy, but hope to upload some soon.. > PROM Monitor SGI Version 5.1 Rev B IP22 Sep 16, 1993 (BE) Not sure, Ralf will be able to tell you what's the score with that.. Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ICQ #: 16007717 | |-----------------------------------------------------------------| | E-Mail: ian@ichilton.co.uk Web: http://www.ichilton.co.uk | |-----------------------------------------------------------------| | Who's General Failure & why's he reading my disk? | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Nov 29 11:30:07 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 11:29:48 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:29188 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 11:29:24 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id LAA23506; Wed, 29 Nov 2000 11:26:40 -0800 Date: Wed, 29 Nov 2000 11:26:40 -0800 From: Keith M Wesolowski To: Ian Chilton Cc: Jesse Dyson , linux-mips@oss.sgi.com Subject: Re: Kernel Boot Hard Locks Indigo 2 Message-ID: <20001129112640.A22235@chem.unr.edu> References: <20001129191730.A22085@woody.ichilton.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20001129191730.A22085@woody.ichilton.co.uk>; from ian@ichilton.co.uk on Wed, Nov 29, 2000 at 07:17:30PM +0000 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 29, 2000 at 07:17:30PM +0000, Ian Chilton wrote: > > I believe I need an ecoff version of the > > kernel (not sure exactly what that means--forgive me) > > I am not too sure either...all I know is some proms require this > doing... PROMs older than a certain date (which may be sometime in 1995) require ECOFF kernels because they are incapable of understanding ELF. The symptom is mentioned in the FAQ. This seems to happen with most if not all Indigo2s and a few older Indys. > > PROM Monitor SGI Version 5.1 Rev B IP22 Sep 16, 1993 (BE) > > Not sure, Ralf will be able to tell you what's the score with that.. You need ECOFF. My Indigo2 has this date also and does not understand ELF. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Wed Nov 29 21:47:54 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 21:47:44 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:57889 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 21:47:19 -0800 Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id VAA08449 for ; Wed, 29 Nov 2000 21:47:17 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) for id NAA11287; Thu, 30 Nov 2000 13:56:58 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Thu, 30 Nov 2000 13:50:36 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CAA@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'linux-mips@oss.sgi.com'" Subject: I'm stuck... Date: Thu, 30 Nov 2000 13:50:35 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi folks. I'm trying to get Linux up on an Indy. I'm using an old laptop to act as the tftp/bootp/nfs server. I've installed SuSE 6.4 on it and I am not sure if I've configured the server properly. I try tftp'ing and bootp'ing from the server side, and both seem to respond to requests, however, when I try from the Indy client, the Indy just shoots back a "server not found for vmlinux" when I do "boot -f bootp():vmlinux". How do I ensure that things on the server side are indeed configured properly? Are there proper tests I can do? For example, if I run "bootpd -s -d4" then run "bootptest", bootpd reports back a large number of things like sending the linux kernel I exported via NFS, and something about a magic number, then bootptest quits. tftp at the server side allows me to download files from the NFS directory. I already have numerous copies of readmes teaching me how to install Linux on MIPS, but somehow all of them vary in many ways, especially the config parts. Is there some install readme for super-idiots like myself who need to be told word for word what to do? If anyone can help, I'll gladly offer more detailed info, like config data and such. Thanks alot! -- Calvine Chew, Technical Consultant Technology & Industry Consulting Group (Asia South), SGI. *************************************************************** Inter spem curamque, timores inter et iras, omnem crede diem tibi diluxisse supremum: grata superveniet quae sperabitur hora. http://www.cyberjunkie.com/arcana *************************************************************** From owner-linux-mips@oss.sgi.com Wed Nov 29 22:47:54 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 22:47:44 -0800 Received: from mail.netunlimited.net ([208.128.132.4]:53519 "EHLO mail.netunlimited.net") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 22:47:24 -0800 Received: from localhost (jesse@localhost) by mail.netunlimited.net (8.9.3/8.9.3) with ESMTP id BAA02083; Thu, 30 Nov 2000 01:48:37 -0500 Date: Thu, 30 Nov 2000 01:48:36 -0500 (EST) From: Jesse Dyson X-Sender: jesse@mail.netunlimited.net To: linux-mips@oss.sgi.com cc: jesse@winston-salem.com Subject: Indigo2 Kernel Boots!!! Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I have an Indigo2. I have tftp/dhcp(bootp)/nfs configured correctly (I think). I am using the hardhat-5.1-sgi.tar.gz distribution and the kernel vmlinux-2.2.14-r4x00-cvs.ecoff. I am using the monitor commands: unsetenv netaddr (dur to DHCP bug) boot bootp():/vmlinux nfsroot=208.128.132.35:/home/jdyson/sgi-linux/mipseb /vmlinux is a symbolic link to vmlinux-2.2... I have the distribution in the mipseb folder (RedHat is a subdirectory of mipseb). I think this is right. When I run this the kernel seems to start up (finds hardware, etc). Connects to the root filesystem...The last message I get is "Warning: unable to open an initial console" I have removed the graphics card from the machine (evidently the vx frame-buffer card is a problem). I am connected to the serial port to get access to command monitor, etc. Anybody have any suggestions on what to do next or what I am doing wrong. Thank you in advance for your time; and thanks guys for helping me get to this point. Thanks, Jesse Dyson From owner-linux-mips@oss.sgi.com Wed Nov 29 23:51:54 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 23:51:45 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:48068 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 23:51:32 -0800 Received: from scotty.mgnet.de (p3E9B81D9.dip.t-dialin.net [62.155.129.217]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id IAA10718 for ; Thu, 30 Nov 2000 08:51:33 +0100 (MET) Received: (qmail 28501 invoked from network); 30 Nov 2000 07:51:29 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 30 Nov 2000 07:51:29 -0000 Date: Thu, 30 Nov 2000 08:51:30 +0100 (CET) From: Klaus Naumann To: Calvine Chew cc: "'linux-mips@oss.sgi.com'" Subject: Re: I'm stuck... In-Reply-To: <43FECA7CDC4CD411A4A3009027999112267CAA@sgp-apsa001e--n.singapore.sgi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 30 Nov 2000, Calvine Chew wrote: > Hi folks. Hi there, > I'm trying to get Linux up on an Indy. I'm using an old laptop to act as the > tftp/bootp/nfs server. I've installed > SuSE 6.4 on it and I am not sure if I've configured the server properly. I ^^^^-- This is your first mistake ... :))) .oO(I hope Andreas doesn't read that) > try tftp'ing and bootp'ing from the server > side, and both seem to respond to requests, however, when I try from the > Indy client, the Indy just shoots back > a "server not found for vmlinux" when I do "boot -f bootp():vmlinux". > > How do I ensure that things on the server side are indeed configured > properly? Are there proper tests I can do? > For example, if I run "bootpd -s -d4" then run "bootptest", bootpd reports > back a large number of things like > sending the linux kernel I exported via NFS, and something about a magic > number, then bootptest quits. tftp > at the server side allows me to download files from the NFS directory. > > I already have numerous copies of readmes teaching me how to install Linux > on MIPS, but somehow all of them > vary in many ways, especially the config parts. Is there some install readme > for super-idiots like myself who need > to be told word for word what to do? I have written a HOWTO for Linux on the Indigo2 - it's now more and more a HOWTO for installing Linux on any SGI box ;) You can have a look at http://oss.sgi.com/mips/i2-howto.html I hope this helps a bit. ALso please don't miss the Pitfalls section - maybe you're hitting one of the described. HTH, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Wed Nov 29 23:53:24 2000 Received: by oss.sgi.com id ; Wed, 29 Nov 2000 23:53:14 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:710 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Wed, 29 Nov 2000 23:53:04 -0800 Received: from scotty.mgnet.de (p3E9B81D9.dip.t-dialin.net [62.155.129.217]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id IAA12324 for ; Thu, 30 Nov 2000 08:53:06 +0100 (MET) Received: (qmail 28505 invoked from network); 30 Nov 2000 07:53:02 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 30 Nov 2000 07:53:02 -0000 Date: Thu, 30 Nov 2000 08:53:03 +0100 (CET) From: Klaus Naumann To: Jesse Dyson cc: linux-mips@oss.sgi.com Subject: Re: Indigo2 Kernel Boots!!! In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 30 Nov 2000, Jesse Dyson wrote: > Hi, > I have an Indigo2. I have tftp/dhcp(bootp)/nfs configured correctly (I > think). I am using the hardhat-5.1-sgi.tar.gz distribution and the kernel > vmlinux-2.2.14-r4x00-cvs.ecoff. > > I am using the monitor commands: > unsetenv netaddr (dur to DHCP bug) > boot bootp():/vmlinux nfsroot=208.128.132.35:/home/jdyson/sgi-linux/mipseb > > /vmlinux is a symbolic link to vmlinux-2.2... > > I have the distribution in the mipseb folder (RedHat is a subdirectory of > mipseb). I think this is right. > > When I run this the kernel seems to start up (finds hardware, etc). > Connects to the root filesystem...The last message I get is "Warning: > unable to open an initial console" If you're booting the kernel with serial console you have to link /dev/console to /dev/ttyS0 - see also Pitfalls section in the Linux on Indigo2 HOWTO (http://oss.sgi.com/mips/i2-howto.html) CU, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Thu Nov 30 00:29:45 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 00:29:25 -0800 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:21252 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 00:29:03 -0800 Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via SMTP id AAA05675 for ; Thu, 30 Nov 2000 00:37:02 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id QAA13603; Thu, 30 Nov 2000 16:38:36 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Thu, 30 Nov 2000 16:32:14 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CAB@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'Klaus Naumann'" Cc: "'linux-mips@oss.sgi.com'" Subject: RE: I'm stuck... Date: Thu, 30 Nov 2000 16:32:06 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Klaus... > -----Original Message----- > From: Klaus Naumann [mailto:spock@mgnet.de] > Sent: Thursday, November 30, 2000 3:52 PM > To: Calvine Chew > Cc: 'linux-mips@oss.sgi.com' > Subject: Re: I'm stuck... > > On Thu, 30 Nov 2000, Calvine Chew wrote: > > > Hi folks. > > Hi there, > > > > I'm trying to get Linux up on an Indy. I'm using an old > laptop to act as the > > tftp/bootp/nfs server. I've installed > > SuSE 6.4 on it and I am not sure if I've configured the > server properly. I > ^^^^-- This is your first mistake ... :))) > .oO(I hope Andreas doesn't read that) > I would have installed RedHat 6.2 (like a trueblue SGI-man :-) but the boot kernel hits the PC Card Services hang on installation. SuSE 6.4 doesn't, hooked up my ethernet/modem and scsi cards beautifully. > > try tftp'ing and bootp'ing from the server > > side, and both seem to respond to requests, however, when I > try from the > > Indy client, the Indy just shoots back > > a "server not found for vmlinux" when I do "boot -f > bootp():vmlinux". > > > > How do I ensure that things on the server side are indeed configured > > properly? Are there proper tests I can do? > > For example, if I run "bootpd -s -d4" then run "bootptest", > bootpd reports > > back a large number of things like > > sending the linux kernel I exported via NFS, and something > about a magic > > number, then bootptest quits. tftp > > at the server side allows me to download files from the NFS > directory. > > > > I already have numerous copies of readmes teaching me how > to install Linux > > on MIPS, but somehow all of them > > vary in many ways, especially the config parts. Is there > some install readme > > for super-idiots like myself who need > > to be told word for word what to do? > > I have written a HOWTO for Linux on the Indigo2 - it's now > more and more > a HOWTO for installing Linux on any SGI box ;) > You can have a look at http://oss.sgi.com/mips/i2-howto.html > I hope this helps a bit. ALso please don't miss the Pitfalls > section - > maybe you're hitting one of the described. > When I try bootp from the Indy, my Linux bootp server doesn't even respond. tcpdump doesn't report anything. The only things I can confirm are working are that I can use tftp to grab files off the exported nfsroot and I can use a program called bootptest to send bootp requests to the bootp server. However, both are done from the server end. In fact if I were to configure bootptab to accept requests from the server itself, bootptest reports this (apologies for the verbosity!!): % bootptest bootptest: version 2.4.3 Sending to 192.168.0.1 (request) htype:0 hlen:0 xld:706 C:192.168.0.1 vend-rfc1395 Revcd from 192.168.0.1 (reply) htype:0 hlen:0 xld:706 C:192.168.0.1 Y:192.168.0.1 S:192.168.0.1 sname:"calvine" file: "/linux/mipseb/vmlinux" vend-rfc1395 SM:255.255.255.0 TZ:7200 ROOT:"/linux/mipseb" % bootpd itself (I'm running it on standalone mode) reports this: %bootpd -s -d4 bootp: info(6): bootptab mtime: Wed Jan 11 17:054:20 1995 (excuse the clock :-) bootp: info(6): reading "/etc/bootptab" bootp: info(6): read 1 entries (1 hosts) from "/etc/bootptab" bootp: info(6): recvd pkt from IP addr 192.168.0.1 bootp: info(6): bootptab mtime: Wed Jan 11 17:054:20 1995 bootp: info(6): request from IP addr 192.168.0.1 bootp: info(6): found 192.168.0.1 (calvine.suse.sgi.com) bootp: info(6): bootfile="/linux/mipseb/vmlinux" bootp: info(6): vendor magic field is 99.130.83.99 bootp: info(6): sending reply (with RFC1048 options) and my bootptab looks like this: **** bootptab begin **** calvine.suse.sgi.com:hd=/linux/mipseb:rp=/linux/mipseb:ht=ethernet:ha:blahbl ah:ip=192.168.0.1:bf=vmlinux:sm=255.255.255.0:to=7200: **** bootptab end ****** Everything seems to be in ship shape (is it?)... I'm thinking if it's a hardware issue. For example, this Indy of mine had a bad Dallas chip, so I swapped a working chip from another dead Indy and placed it into the one I'm using. Could also be a crosscable issue (it's Linux to Indy connection now), since there just isn't any traffic going on. Damn, this is getting really annoying. We really should be porting Irix to IA, instead of Linux to MIPS. I realise that my issues are becoming more Linux than MIPS/Linux, but honestly I can't be sure. I don't exactly have alot of resources to do trial&error testing. I have a few years' Linux experience but never bootp/remote booting. This mailing list was my last respite! -- Calvine Chew, Technical Consultant Technology & Industry Consulting Group (Asia South), SGI. *************************************************************** Inter spem curamque, timores inter et iras, omnem crede diem tibi diluxisse supremum: grata superveniet quae sperabitur hora. http://www.cyberjunkie.com/arcana *************************************************************** From owner-linux-mips@oss.sgi.com Thu Nov 30 01:01:15 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 01:01:05 -0800 Received: from Cantor.suse.de ([194.112.123.193]:24076 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Thu, 30 Nov 2000 01:00:50 -0800 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 749671E09E; Thu, 30 Nov 2000 10:00:48 +0100 (MET) Received: from Wotan.suse.de (Wotan.suse.de [10.10.0.1]) by Hermes.suse.de (Postfix) with ESMTP id 43B153E462; Thu, 30 Nov 2000 10:00:48 +0100 (MET) Received: from gee.suse.de (Gee.suse.de [10.10.1.56]) by Wotan.suse.de (Postfix) with ESMTP id 0729E1C8259; Thu, 30 Nov 2000 10:00:48 +0100 (CET) Received: (from aj@localhost) by gee.suse.de (8.11.0/8.11.0/SuSE Linux 8.11.0-0.4) id eAU90lN22076; Thu, 30 Nov 2000 10:00:47 +0100 X-Authentication-Warning: gee.suse.de: aj set sender to aj@suse.de using -f Mail-Copies-To: never To: Klaus Naumann Cc: Calvine Chew , "'linux-mips@oss.sgi.com'" Subject: Re: I'm stuck... References: From: Andreas Jaeger Date: 30 Nov 2000 10:00:47 +0100 In-Reply-To: Message-ID: Lines: 23 User-Agent: Gnus/5.0808 (Gnus v5.8.8) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> Klaus Naumann writes: Klaus> On Thu, 30 Nov 2000, Calvine Chew wrote: >> Hi folks. Klaus> Hi there, >> I'm trying to get Linux up on an Indy. I'm using an old laptop to act as the >> tftp/bootp/nfs server. I've installed >> SuSE 6.4 on it and I am not sure if I've configured the server properly. I Klaus> ^^^^-- This is your first mistake ... :))) Why is this a mistake? I managed to get those to work on my 6.4 without problems - but please let's not start a distribution war. Klaus> .oO(I hope Andreas doesn't read that) I did ;-) Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de http://www.suse.de/~aj From owner-linux-mips@oss.sgi.com Thu Nov 30 06:40:47 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 06:40:37 -0800 Received: from mail.netunlimited.net ([208.128.132.4]:33039 "EHLO mail.netunlimited.net") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 06:40:19 -0800 Received: from localhost (jesse@localhost) by mail.netunlimited.net (8.9.3/8.9.3) with ESMTP id JAA07661; Thu, 30 Nov 2000 09:41:26 -0500 Date: Thu, 30 Nov 2000 09:41:26 -0500 (EST) From: Jesse Dyson X-Sender: jesse@mail.netunlimited.net To: Klaus Naumann cc: linux-mips@oss.sgi.com Subject: Re: Indigo2 Kernel Boots!!! In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I'm not exactly sure what this means to "link" /dev/console. Based on the FAQ (http://foobazco.org/~weslows/Install-HOWTO.html), I shouldn't have to do the inittab stuff since I am in ser port 1. I noticed I do not have an /etc/inittab file in my root fs, but there is a inittabold. Is there something with these files I have to fix or do I do an 'ln -s' or something on the /dev/console and point it to /dev/ttyS0? Sorry for my ignorance. Thanks for your help. Thanks, Jesse Dyson On Thu, 30 Nov 2000, Klaus Naumann wrote: > On Thu, 30 Nov 2000, Jesse Dyson wrote: > > > Hi, > > I have an Indigo2. I have tftp/dhcp(bootp)/nfs configured correctly (I > > think). I am using the hardhat-5.1-sgi.tar.gz distribution and the kernel > > vmlinux-2.2.14-r4x00-cvs.ecoff. > > > > I am using the monitor commands: > > unsetenv netaddr (dur to DHCP bug) > > boot bootp():/vmlinux nfsroot=208.128.132.35:/home/jdyson/sgi-linux/mipseb > > > > /vmlinux is a symbolic link to vmlinux-2.2... > > > > I have the distribution in the mipseb folder (RedHat is a subdirectory of > > mipseb). I think this is right. > > > > When I run this the kernel seems to start up (finds hardware, etc). > > Connects to the root filesystem...The last message I get is "Warning: > > unable to open an initial console" > > If you're booting the kernel with serial console you have to > link /dev/console to /dev/ttyS0 - see also Pitfalls section in the > Linux on Indigo2 HOWTO (http://oss.sgi.com/mips/i2-howto.html) > > CU, Klaus > > -- > Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) > Nickname : Spock | Org.: Mad Guys Network > Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) > PGP Key : www.mgnet.de/keys/key_spock.txt > From owner-linux-mips@oss.sgi.com Thu Nov 30 06:43:08 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 06:42:47 -0800 Received: from exchange.sla.purdue.edu ([128.210.57.242]:40974 "EHLO sla-exchange.sla.purdue.edu") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 06:42:44 -0800 Received: by exchange.sla.purdue.edu with Internet Mail Service (5.5.2650.21) id ; Thu, 30 Nov 2000 09:46:29 -0500 Message-ID: <82D2384F0660D411891100902771937F16F977@exchange.sla.purdue.edu> From: "Marcom, Greg" To: linux-mips@oss.sgi.com Subject: Remove from list Date: Thu, 30 Nov 2000 09:46:19 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01C05ADC.524775B6" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_001_01C05ADC.524775B6 Content-Type: text/plain; charset="iso-8859-1" Does anyone know how I can get my name off this list? ------_=_NextPart_001_01C05ADC.524775B6 Content-Type: text/html; charset="iso-8859-1"
Does anyone know how I can get my name off this list?
------_=_NextPart_001_01C05ADC.524775B6-- From owner-linux-mips@oss.sgi.com Thu Nov 30 07:58:57 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 07:58:37 -0800 Received: from rotor.chem.unr.edu ([134.197.32.176]:31755 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 07:58:34 -0800 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id HAA02685; Thu, 30 Nov 2000 07:56:42 -0800 Date: Thu, 30 Nov 2000 07:56:42 -0800 From: Keith M Wesolowski To: Jesse Dyson Cc: Klaus Naumann , linux-mips@oss.sgi.com Subject: Re: Indigo2 Kernel Boots!!! Message-ID: <20001130075641.A2325@chem.unr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from jesse@winston-salem.com on Thu, Nov 30, 2000 at 09:41:26AM -0500 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 30, 2000 at 09:41:26AM -0500, Jesse Dyson wrote: > > > think). I am using the hardhat-5.1-sgi.tar.gz distribution and the kernel ... > I'm not exactly sure what this means to "link" /dev/console. Based on the > FAQ (http://foobazco.org/~weslows/Install-HOWTO.html), I shouldn't have to > do the inittab stuff since I am in ser port 1. I noticed I do not have an The FAQ on my site has nothing whatever to do with the Hard Hat distribution. I have no idea how relevant it is if you're using that. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Thu Nov 30 08:07:58 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 08:07:37 -0800 Received: from mx.mips.com ([206.31.31.226]:38019 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 08:07:26 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id IAA04037; Thu, 30 Nov 2000 08:06:58 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id IAA29697; Thu, 30 Nov 2000 08:07:17 -0800 (PST) Message-ID: <00f601c05ae8$19014500$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jesse Dyson" , "Klaus Naumann" Cc: References: Subject: Re: Indigo2 Kernel Boots!!! Date: Thu, 30 Nov 2000 17:10:32 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > I'm not exactly sure what this means to "link" /dev/console. Based on the > FAQ (http://foobazco.org/~weslows/Install-HOWTO.html), I shouldn't have to > do the inittab stuff since I am in ser port 1. I noticed I do not have an > /etc/inittab file in my root fs, but there is a inittabold. Is there > something with these files I have to fix or do I do an 'ln -s' or > something on the /dev/console and point it to /dev/ttyS0? When the init process fires up, it opens /dev/console as the console output device. A default SGI workstation installation file system will have /dev/console bound to the major/minor device node of the graphics display console. If you want to run with a serial console, you must therefore change this to bind /dev/console to the serial port. You can do this by doing an explicit mknod, or by linking to the appropriate serial port device node, which is usually /dev/ttyS0. Kevin K. From owner-linux-mips@oss.sgi.com Thu Nov 30 10:45:20 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 10:45:00 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:56190 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 10:44:42 -0800 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id KAA24164 for ; Thu, 30 Nov 2000 10:44:36 -0800 (PST) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id NAA10351; Thu, 30 Nov 2000 13:41:25 -0500 Date: Thu, 30 Nov 2000 13:41:25 -0500 From: "J. Scott Kasten" To: Calvine Chew cc: "'Klaus Naumann'" , "'linux-mips@oss.sgi.com'" Subject: RE: I'm stuck... In-Reply-To: <43FECA7CDC4CD411A4A3009027999112267CAB@sgp-apsa001e--n.singapore.sgi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I'm using the ISC DHCP server under RH. I've configured it to offer bootp to the specific hardware address of the SGI box. here's an excerpt: subnet 192.168.254.0 netmask 255.255.255.0 { server-name "minerva"; next-server 192.168.254.1; option domain-name-servers 192.168.254.1; option routers 192.168.254.1; option root-path "/mnt/archives/SimpleLinux-0.1_Indy"; host SGI { hardware ethernet 08:00:69:09:13:9A; fixed-address 192.168.254.240; filename "vmlinux"; } } The 192.168.254.1 host is also the tftp and nfs server. If I recall correctly, the tftp and nfs server must be the same host. Good luck. > > > I'm trying to get Linux up on an Indy. I'm using an old > > laptop to act as the > > > tftp/bootp/nfs server. I've installed > > > SuSE 6.4 on it and I am not sure if I've configured the > > server properly. I > > ^^^^-- This is your first mistake ... :))) > > .oO(I hope Andreas doesn't read that) > > > I would have installed RedHat 6.2 (like a trueblue SGI-man :-) but > the boot kernel hits the PC Card Services hang on installation. > SuSE 6.4 doesn't, hooked up my ethernet/modem and scsi cards beautifully. > > > > try tftp'ing and bootp'ing from the server > > > side, and both seem to respond to requests, however, when I > > try from the > > > Indy client, the Indy just shoots back > > > a "server not found for vmlinux" when I do "boot -f > > bootp():vmlinux". > > > From owner-linux-mips@oss.sgi.com Thu Nov 30 13:30:41 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 13:30:31 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:63201 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 13:30:07 -0800 Received: from scotty.mgnet.de (pC19F6F69.dip.t-dialin.net [193.159.111.105]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id WAA05262 for ; Thu, 30 Nov 2000 22:30:06 +0100 (MET) Received: (qmail 30794 invoked from network); 30 Nov 2000 21:29:59 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 30 Nov 2000 21:29:59 -0000 Date: Thu, 30 Nov 2000 22:30:01 +0100 (CET) From: Klaus Naumann To: Calvine Chew cc: "'linux-mips@oss.sgi.com'" Subject: RE: I'm stuck... In-Reply-To: <43FECA7CDC4CD411A4A3009027999112267CAB@sgp-apsa001e--n.singapore.sgi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 30 Nov 2000, Calvine Chew wrote: > Hi Klaus... > > I would have installed RedHat 6.2 (like a trueblue SGI-man :-) but > the boot kernel hits the PC Card Services hang on installation. > SuSE 6.4 doesn't, hooked up my ethernet/modem and scsi cards beautifully. It's ok - I was just kiddin' because it's known that I'm not a big fan of the SuSE distribution for several reasons - but I'm far away from wanting to start a distro war here. So to make it clear I really was joking. [snipped verbose message] Calvine, what I'm asking myself is, if the box actually has connection to the net. Becuase if you don't get a single packet out on bootp time then something really is broken. So please try to check in any way if the box has netconn - does it have an AUI ? Some SGI systems seem to use that as first ethernet adapter and have problems with it ... HTH, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Thu Nov 30 13:33:01 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 13:32:51 -0800 Received: from natmail2.webmailer.de ([192.67.198.65]:58339 "EHLO post.webmailer.de") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 13:32:45 -0800 Received: from scotty.mgnet.de (pC19F6F69.dip.t-dialin.net [193.159.111.105]) by post.webmailer.de (8.9.3/8.8.7) with SMTP id WAA07934 for ; Thu, 30 Nov 2000 22:32:46 +0100 (MET) Received: (qmail 30816 invoked from network); 30 Nov 2000 21:32:41 -0000 Received: from spock.mgnet.de (192.168.1.4) by scotty.mgnet.de with SMTP; 30 Nov 2000 21:32:41 -0000 Date: Thu, 30 Nov 2000 22:32:42 +0100 (CET) From: Klaus Naumann To: Andreas Jaeger cc: Calvine Chew , "'linux-mips@oss.sgi.com'" Subject: Re: I'm stuck... In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 30 Nov 2000, Andreas Jaeger wrote: > >> SuSE 6.4 on it and I am not sure if I've configured the server properly. I > Klaus> ^^^^-- This is your first mistake ... :))) > Why is this a mistake? I managed to get those to work on my 6.4 > without problems - but please let's not start a distribution war. Not at all - I'm just not a big fan of SuSE. This has several reasons. E.g. that this distro is not a distro which fits my needs ( means: I don't need a "startinstall-clickaround-andlookcool" distro). So this doesn't mean I think SuSE is in general bad - I'm just not a fan of it myself. > Klaus> .oO(I hope Andreas doesn't read that) > I did ;-) Oh my - I'm in trouble =] CU, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Thu Nov 30 16:00:32 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 16:00:22 -0800 Received: from u-59-20.karlsruhe.ipdial.viaginterkom.de ([62.180.20.59]:45320 "EHLO u-59-20.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 16:00:02 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 1 Dec 2000 00:59:42 +0100 Date: Fri, 1 Dec 2000 00:59:42 +0100 From: Ralf Baechle To: "Kevin D. Kissell" Cc: Jesse Dyson , Klaus Naumann , linux-mips@oss.sgi.com Subject: Re: Indigo2 Kernel Boots!!! Message-ID: <20001201005942.A6172@bacchus.dhis.org> References: <00f601c05ae8$19014500$0deca8c0@Ulysses> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <00f601c05ae8$19014500$0deca8c0@Ulysses>; from kevink@mips.com on Thu, Nov 30, 2000 at 05:10:32PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Nov 30, 2000 at 05:10:32PM +0100, Kevin D. Kissell wrote: > When the init process fires up, it opens /dev/console as the > console output device. A default SGI workstation installation > file system will have /dev/console bound to the major/minor device > node of the graphics display console. If you want to run with a serial > console, you must therefore change this to bind /dev/console > to the serial port. You can do this by doing an explicit mknod, > or by linking to the appropriate serial port device node, > which is usually /dev/ttyS0. Which both are wrong. /dev/console should be a char device major 5, minor 1. There is no need to change this ever except for very old kernels. With 2.2 or 2.4 whenever people change /dev/console's major/minor it's usually painting over some bug. Ralf From owner-linux-mips@oss.sgi.com Thu Nov 30 16:03:22 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 16:03:01 -0800 Received: from u-59-20.karlsruhe.ipdial.viaginterkom.de ([62.180.20.59]:45320 "EHLO u-59-20.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 16:02:53 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 1 Dec 2000 01:02:34 +0100 Date: Fri, 1 Dec 2000 01:02:34 +0100 From: Ralf Baechle To: Keith M Wesolowski Cc: Ian Chilton , Jesse Dyson , linux-mips@oss.sgi.com Subject: Re: Kernel Boot Hard Locks Indigo 2 Message-ID: <20001201010234.B6172@bacchus.dhis.org> References: <20001129191730.A22085@woody.ichilton.co.uk> <20001129112640.A22235@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20001129112640.A22235@chem.unr.edu>; from wesolows@chem.unr.edu on Wed, Nov 29, 2000 at 11:26:40AM -0800 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Nov 29, 2000 at 11:26:40AM -0800, Keith M Wesolowski wrote: > PROMs older than a certain date (which may be sometime in 1995) > require ECOFF kernels because they are incapable of understanding ELF. > The symptom is mentioned in the FAQ. This seems to happen with most > if not all Indigo2s and a few older Indys. > > > > PROM Monitor SGI Version 5.1 Rev B IP22 Sep 16, 1993 (BE) > > > > Not sure, Ralf will be able to tell you what's the score with that.. > > You need ECOFF. My Indigo2 has this date also and does not understand > ELF. Rule of thumb, R5k IP22 can handle ELF, pre-R5k firmware may or may not. Ralf From owner-linux-mips@oss.sgi.com Thu Nov 30 17:18:13 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 17:17:53 -0800 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:60421 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 17:17:23 -0800 Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via SMTP id RAA07643 for ; Thu, 30 Nov 2000 17:25:24 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id JAA22496; Fri, 1 Dec 2000 09:26:44 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Fri, 1 Dec 2000 09:20:23 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CAD@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'Klaus Naumann'" Cc: "'linux-mips@oss.sgi.com'" , "'J. Scott Kasten'" Subject: RE: I'm stuck... Date: Fri, 1 Dec 2000 09:20:15 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > -----Original Message----- > From: Klaus Naumann [mailto:spock@mgnet.de] > Sent: Friday, December 01, 2000 5:30 AM > To: Calvine Chew > Cc: 'linux-mips@oss.sgi.com' > Subject: RE: I'm stuck... > > > [snipped verbose message] > > Calvine, what I'm asking myself is, if the box actually has connection > to the net. Becuase if you don't get a single packet out on bootp time > then something really is broken. So please try to check in any way if > the box has netconn - does it have an AUI ? Some SGI systems seem > to use that as first ethernet adapter and have problems with it ... > Well, the good news is I've finally gotten my Indy to see my boot server. When testing outgoing packets by configuring both server and client to the SGI network, I discovered that my 2nd PCMCIA port, for some reason doesn't configure any PCMCIA cards properly (same thing happened to my SCSI card, but I thought it was an isolated incident). Switching to the 1st port made everything work. Unfortunately tftp isn't working. I have it configured using in.tftpd wrapped to tcpd, but when the Indy tries to get the bootfile, it says "TFTP error: File not found (code 1)". The boopd does respond with the seemingly correct messages but I am not sure if in.tftpd is working or not. I have bootpd running on standalone (non-inetd) mode because in.bootpd didn't work too. However I don't have tftpd. *groan* Have to look into that later... PS, Scott, I'm not using DHCP, but bootpd. Do I still need to configure dhcp too? I assume that subnet entry excerpt is from dhcpd.conf? -- Calvine Chew, Technical Consultant Technology & Industry Consulting Group (Asia South), SGI. *************************************************************** Inter spem curamque, timores inter et iras, omnem crede diem tibi diluxisse supremum: grata superveniet quae sperabitur hora. http://www.cyberjunkie.com/arcana *************************************************************** From owner-linux-mips@oss.sgi.com Thu Nov 30 17:33:13 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 17:33:03 -0800 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:54793 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 17:32:39 -0800 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id RAA04256 for ; Thu, 30 Nov 2000 17:40:42 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via SMTP id RAA06696 for ; Thu, 30 Nov 2000 17:32:05 -0800 (PST) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) id JAA22741; Fri, 1 Dec 2000 09:40:24 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Fri, 1 Dec 2000 09:34:03 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CAE@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'Klaus Naumann'" , "'J. Scott Kasten'" Cc: "'linux-mips@oss.sgi.com'" Subject: RE: I'm stuck... Date: Fri, 1 Dec 2000 09:33:59 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Klaus and Scott. Got tftp to work... damn! Linux in.tftpd didn't like the "-s" flag in inetd.conf. Once that was gone, the HardHat install fired up! Thanks all!! -- Calvine Chew, Technical Consultant Technology & Industry Consulting Group (Asia South), SGI. *************************************************************** Inter spem curamque, timores inter et iras, omnem crede diem tibi diluxisse supremum: grata superveniet quae sperabitur hora. http://www.cyberjunkie.com/arcana *************************************************************** > -----Original Message----- > From: Klaus Naumann [mailto:spock@mgnet.de] > Sent: Friday, December 01, 2000 5:30 AM > To: Calvine Chew > Cc: 'linux-mips@oss.sgi.com' > Subject: RE: I'm stuck... > > > On Thu, 30 Nov 2000, Calvine Chew wrote: > > > Hi Klaus... > > > > I would have installed RedHat 6.2 (like a trueblue SGI-man :-) but > > the boot kernel hits the PC Card Services hang on installation. > > SuSE 6.4 doesn't, hooked up my ethernet/modem and scsi > cards beautifully. > > It's ok - I was just kiddin' because it's known that I'm not a big fan > of the SuSE distribution for several reasons - but I'm far away from > wanting to start a distro war here. So to make it clear I really was > joking. > > [snipped verbose message] > > Calvine, what I'm asking myself is, if the box actually has connection > to the net. Becuase if you don't get a single packet out on bootp time > then something really is broken. So please try to check in any way if > the box has netconn - does it have an AUI ? Some SGI systems seem > to use that as first ethernet adapter and have problems with it ... > > HTH, Klaus > > -- > Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) > Nickname : Spock | Org.: Mad Guys Network > Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) > PGP Key : www.mgnet.de/keys/key_spock.txt > From owner-linux-mips@oss.sgi.com Thu Nov 30 18:07:23 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 18:07:13 -0800 Received: from u-3-18.karlsruhe.ipdial.viaginterkom.de ([62.180.18.3]:25097 "EHLO u-3-18.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 18:07:04 -0800 Received: (ralf@lappi) by bacchus.dhis.org id ; Fri, 1 Dec 2000 03:06:19 +0100 Date: Fri, 1 Dec 2000 03:06:19 +0100 From: Ralf Baechle To: linux-mips@oss.sgi.com, linux-mips@fnet.fr Subject: binutils upgrade Message-ID: <20001201030619.A7444@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Binutils were buggy handling a cases involving empty object files. I've uploaded fixed binutils 2.8.1 cross-linker packages to oss.sgi.com; I'll upload fixed binutils 2.9.5 binaries (mips64 only) later. The worarounds for this bug have been removed from the CVS archive that is updating is required for building a current 2.4 kernel. Ralf From owner-linux-mips@oss.sgi.com Thu Nov 30 22:54:57 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 22:54:37 -0800 Received: from deliverator.sgi.com ([204.94.214.10]:44831 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 22:54:06 -0800 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id WAA18959 for ; Thu, 30 Nov 2000 22:54:05 -0800 (PST) mail_from (calvine@sgi.com) Received: from sgisgp.singapore.sgi.com (sgisgp.singapore.sgi.com [134.14.84.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via SMTP id WAA22245 for ; Thu, 30 Nov 2000 22:52:16 -0800 (PST) Received: from sgp-apsa001e--n.singapore.sgi.com by sgisgp.singapore.sgi.com via ESMTP (950413.SGI.8.6.12/930416.SGI) for id PAA26927; Fri, 1 Dec 2000 15:00:40 +0800 Received: by sgp-apsa001e--n.singapore.sgi.com with Internet Mail Service (5.5.2650.21) id ; Fri, 1 Dec 2000 14:54:20 +0800 Message-ID: <43FECA7CDC4CD411A4A3009027999112267CB3@sgp-apsa001e--n.singapore.sgi.com> From: Calvine Chew To: "'linux-mips'" Subject: Xwindows/XFree86 in HardHat? Date: Fri, 1 Dec 2000 14:54:19 +0800 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi folks! Does HardHat include some form of Xwindows? There are some xwindows files in the distribution, but I can't fire up xwindows (some files seem to be missing). I did notice that HardHat included only one XF86 server (XF68_FBDev) but if I used that, startx reports a X11TransSocketUNIXConnect errno 146. Do I need to install the latest XFree86 distribution (4.0.1), or is there some other things I can fiddle with in the config files? TIA!! -- Calvine Chew, Technical Consultant Technology & Industry Consulting Group (Asia South), SGI. *************************************************************** Inter spem curamque, timores inter et iras, omnem crede diem tibi diluxisse supremum: grata superveniet quae sperabitur hora. http://www.cyberjunkie.com/arcana *************************************************************** From owner-linux-mips@oss.sgi.com Thu Nov 30 23:20:17 2000 Received: by oss.sgi.com id ; Thu, 30 Nov 2000 23:20:07 -0800 Received: from mx.mips.com ([206.31.31.226]:29329 "EHLO mx.mips.com") by oss.sgi.com with ESMTP id ; Thu, 30 Nov 2000 23:19:49 -0800 Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id XAA12900; Thu, 30 Nov 2000 23:19:17 -0800 (PST) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id XAA26101; Thu, 30 Nov 2000 23:19:32 -0800 (PST) Message-ID: <001901c05b67$8c88ab60$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Ralf Baechle" Cc: "Jesse Dyson" , "Klaus Naumann" , References: <00f601c05ae8$19014500$0deca8c0@Ulysses> <20001201005942.A6172@bacchus.dhis.org> Subject: Re: Indigo2 Kernel Boots!!! Date: Fri, 1 Dec 2000 08:22:51 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4133.2400 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > When the init process fires up, it opens /dev/console as the > > console output device. A default SGI workstation installation > > file system will have /dev/console bound to the major/minor device > > node of the graphics display console. If you want to run with a serial > > console, you must therefore change this to bind /dev/console > > to the serial port. You can do this by doing an explicit mknod, > > or by linking to the appropriate serial port device node, > > which is usually /dev/ttyS0. > > Which both are wrong. /dev/console should be a char device major 5, minor 1. > There is no need to change this ever except for very old kernels. With 2.2 > or 2.4 whenever people change /dev/console's major/minor it's usually painting > over some bug. Having been through the exercise a dozen or more times with the SGI 2.2 kernel distributions for the Indy, I would be fascinated to know what bug I was painting over, and where the correct procedure was documented. Kevin K. .