From owner-linux-mips@oss.sgi.com Tue Aug 1 01:44:48 2000 Received: by oss.sgi.com id ; Tue, 1 Aug 2000 01:44:38 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:912 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 1 Aug 2000 01:44:10 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id KAA08460; Tue, 1 Aug 2000 10:43:02 +0200 (MET DST) Date: Tue, 1 Aug 2000 10:42:59 +0200 (MET DST) From: "Maciej W. Rozycki" To: Dan Aizenstros cc: linux-mips@oss.sgi.com Subject: Re: Binutils-2.10 In-Reply-To: <3985FC8A.70E449C6@vcubed.com> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 31 Jul 2000, Dan Aizenstros wrote: > Thanks for the help. I was able to build binutils-2.10 after > generating the headers as you described. Good. > The reason I expect the patch to change generated files is > because the normal make does not generate them and the files > are included in the binutils-2.10.tar.bz2 file. They are also > in CVS. Why are generated files in CVS or the binary distribution > if you have to generate them? To save people the trouble many generated files are included by default. There is no need to regenerate them if respective sources remain unchanged and they may need special tools. They include Makefile.in, config.h.in, aclocal.m4, Makefile, configure files, as well as .info files and sources built by lex and yacc. > I thought all I would have to do is a ./configure; make; make install All built sources are usually regenerated if needed during build (that's true for most automake-generated Makefiles; for others, the maintainer has to take care to place appropriate rules inti Makefiles himself). You might need to enable the maintainer mode for certain programs, though, as someone already pointed out. > after I applied the patches. Maybe you could add the need to generate > files on your binutils-2.10 web page. I am planning to release RPM packages -- all necessary bits are in spec files. I might add a separate note, though. -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Aug 1 16:57:12 2000 Received: by oss.sgi.com id ; Tue, 1 Aug 2000 16:57:02 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:46386 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 1 Aug 2000 16:56:30 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id QAA20020 for ; Tue, 1 Aug 2000 16:48:18 -0700 (PDT) mail_from (jsun@mvista.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id QAA44641 for ; Tue, 1 Aug 2000 16:54:04 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA33429 for ; Tue, 1 Aug 2000 16:52:32 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA03734 for ; Tue, 1 Aug 2000 16:52:31 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id QAA12032; Tue, 1 Aug 2000 16:52:26 -0700 Message-ID: <398762B9.D8507860@mvista.com> Date: Tue, 01 Aug 2000 16:52:25 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr, ralf@oss.sgi.com Subject: PROPOSAL : multi-way cache support in Linux/MIPS Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf, I have got NEC DDB5476 running stable enough that I am comfortable to check in my code. Will you take it? Assuming the answer is yes, there are several issues regarding checking in. I will bring them up one by one. The first issue is multi-way cache support. DDB5476 uses R5432 CPU which has two-way set-associative cache. The problematic part is the index-based cache operations in r4xxcache.h does not cover all ways in a set. I think this is a problem in general. So far I have seen MIPS processors with 2-way, 4-way and 8-way sets. And I have seen them using ether least- significant-addressing-bits or most-significant-addressing-bits within a cache line to select ways. Here is my proposal : . introduce two variables, cache_num_ways - number of ways in a set cache_way_selection_offset - the offset added to the address to select next cache line in the same set. For LSBs addressing, it is equal to 1. For MSBs addressing, it is equal to cache_line_size / cache_num_ways. (It can potentially take care of some future weired way-selection scheme as long as the offset is uniform) . These variables are initialized in cpu_probe(). (Alternatively, I think we should have cpu_info table, that contains all these cpu information. Then a general routine can fill in the based on the cpu id. This can get rid of a bunch of ugly switch/case statements.) . in the include/asm/r4kcache.h file, all Index-based cache operation needs to changed like the following (for illustration only; need optimization) : ----- while(start < end) { cache16_unroll32(start,Index_Writeback_Inv_D); start += 0x200; } +++++ while(start < end) { for (i=0; i< cache_num_ways; i++) { cache16_unroll32(start + i*cache_way_selection_offset, Index_Writeback_Inv_D); } start += 0x200; } ===== What do you think? If it is OK, I can do the patch. The cpu_info table is a nice wish, but I don't think I know enough to do that job yet. Jun From owner-linux-mips@oss.sgi.com Wed Aug 2 01:29:39 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 01:29:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:49784 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 01:29:01 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id BAA26641 for ; Wed, 2 Aug 2000 01:20:57 -0700 (PDT) mail_from (kevink@mips.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id BAA03600 for ; Wed, 2 Aug 2000 01:26:44 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id BAA96327 for ; Wed, 2 Aug 2000 01:25:12 -0700 (PDT) mail_from (kevink@mips.com) Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id BAA04082 for ; Wed, 2 Aug 2000 01:25:10 -0700 (PDT) mail_from (kevink@mips.com) Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id BAA29838; Wed, 2 Aug 2000 01:23:56 -0700 (PDT) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id BAA15451; Wed, 2 Aug 2000 01:23:52 -0700 (PDT) Message-ID: <008601bffc5b$6714c0a0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" , , , Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS Date: Wed, 2 Aug 2000 10:26:38 +0200 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0083_01BFFC6C.24323180" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_0083_01BFFC6C.24323180 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Rather than re-invent the wheel, please consider the cache descriptor data structures we developed at MIPS to deal with this problem. I believe that the updated cache.h file, and maybe even the cpu_probe.c file, was checked into the 2.2 repository at SGI long ago. There are also a set of initialisation and invalidation routines that key off the cache descriptor structure, but those aren't in the SGI repository (though anyone can get them from ftp.mips.com or www.paralogos.com). The CPU probe logic (also on those sites, and already integrated into several variants because it also supports setting up state needed by the software FPU emulation) is table-based, and for each PrID value, there is a template for the cache characteristics, which can either be taken "as is" or probed, depending on a flag in the descriptor. Since the number of "ways" cannot always be determined by probing, if the number of ways is specified, it is preserved even if a cache probe is performed. I won't attach the full set of cache probe routines (which would only confuse things), but here is the cache data structure definition and the CPU descriptor template table that we use. Regads, Kevin K. -----Original Message----- From: Jun Sun To: linux@cthulhu.engr.sgi.com ; linux-mips@fnet.fr ; ralf@oss.sgi.com Date: Wednesday, August 02, 2000 2:01 AM Subject: PROPOSAL : multi-way cache support in Linux/MIPS >Ralf, > >I have got NEC DDB5476 running stable enough that I am comfortable to >check in >my code. Will you take it? > >Assuming the answer is yes, there are several issues regarding checking >in. >I will bring them up one by one. > >The first issue is multi-way cache support. DDB5476 uses R5432 CPU >which >has two-way set-associative cache. The problematic part is the >index-based cache operations in r4xxcache.h does not cover all ways in a >set. > >I think this is a problem in general. So far I have seen MIPS >processors with >2-way, 4-way and 8-way sets. And I have seen them using ether least- >significant-addressing-bits or most-significant-addressing-bits >within a cache line to select ways. > >Here is my proposal : > >. introduce two variables, > cache_num_ways - number of ways in a set > cache_way_selection_offset - the offset added to the address to >select > next cache line in the same set. For LSBs addressing, >it is > equal to 1. For MSBs addressing, it is equal to > cache_line_size / cache_num_ways. (It can potentially >take > care of some future weired way-selection scheme as long >as > the offset is uniform) > >. These variables are initialized in cpu_probe(). > > (Alternatively, I think we should have cpu_info table, that contains >all > these cpu information. Then a general routine can fill in the based >on > the cpu id. This can get rid of a bunch of ugly switch/case >statements.) > >. in the include/asm/r4kcache.h file, all Index-based cache operation >needs > to changed like the following (for illustration only; need >optimization) : > >----- > while(start < end) { > cache16_unroll32(start,Index_Writeback_Inv_D); > start += 0x200; > } >+++++ > while(start < end) { > for (i=0; i< cache_num_ways; i++) { > cache16_unroll32(start + >i*cache_way_selection_offset, > Index_Writeback_Inv_D); > } > start += 0x200; > } >===== > >What do you think? If it is OK, I can do the patch. The cpu_info table >is a nice wish, but I don't think I know enough to do that job yet. > >Jun ------=_NextPart_000_0083_01BFFC6C.24323180 Content-Type: application/octet-stream; name="cache.h" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="cache.h" LyoKICogaW5jbHVkZS9hc20tbWlwcy9jYWNoZS5oCiAqLwovKioqKioqKioqKioqKioqKioqKioq KioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioKICog IDcgRGVjLCAxOTk5LgogKiAgQWRkZWQgZGVmaW5pdGlvbiBvZiBjYWNoZSBkZXNjcmlwdG9yIHN0 cnVjdHVyZS4KICoKICogIEtldmluIEQuIEtpc3NlbGwsIGtldmlua0BtaXBzLmNvbQogKiAgQ29w eXJpZ2h0IChDKSAxOTk5IE1JUFMgVGVjaG5vbG9naWVzLCBJbmMuICBBbGwgcmlnaHRzIHJlc2Vy dmVkLgogKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioq KioqKioqKioqKioqKioqKioqKioqKi8KCiNpZm5kZWYgX19BU01fTUlQU19DQUNIRV9ICiNkZWZp bmUgX19BU01fTUlQU19DQUNIRV9ICgojaWZuZGVmIF9MQU5HVUFHRV9BU1NFTUJMWQovKgogKiBE ZXNjcmlwdG9yIGZvciBhIGNhY2hlCiAqLwoKc3RydWN0IGNhY2hlX2Rlc2MgewogICAgICAgIGlu dCBsaW5lc3o7CiAgICAgICAgaW50IHNldHM7CiAgICAgICAgaW50IHdheXM7CiAgICAgICAgaW50 IGZsYWdzOyAgICAgIC8qIERldGFpbHMgbGlrZSB3cml0ZSB0aHJ1L2JhY2ssIGNvaGVyZW50LCBl dGMuICovCn07CgojZW5kaWYKLyoKICogRmxhZyBkZWZpbml0aW9ucwogKi8KCiNkZWZpbmUgTUlQ U19DQUNIRV9ORUVEU19DT05GSUcJMHgwMDAwMDAwMQojZGVmaW5lIE1JUFNfQ0FDSEVfVklSVFVB TAkweDAwMDAwMDAyICAvKiBWaXJ0dWFsbHkgdGFnZ2VkICovCgovKiBieXRlcyBwZXIgTDEgY2Fj aGUgbGluZSAqLwoKLyogCiAqIEl0IHdvdWxkIGJlIG5pY2UgdG8gbWFrZSB0aGlzIGR5bmFtaWMs IAogKiBiYXNlZCBvbiBtaXBzX2NwdS5kY2FjaGUubGluZXN6LCBidXQKICogaXQgaXMgdXNlZCBm b3IgZml4ZWQtc2l6ZSBzdHJ1Y3R1cmUgYWxsb2NhdGlvbi4KICogU2V0IHRvIGtub3duIG1heGlt dW0gZm9yIE1JUFMgYXJjaGl0ZWN0dXJlLCAzMiBieXRlcy4KICovCgojZGVmaW5lICAgICAgICBM MV9DQUNIRV9CWVRFUyAgMzIKCgojZGVmaW5lICAgICAgICBMMV9DQUNIRV9BTElHTih4KSAgICAg ICAoKCh4KSsoTDFfQ0FDSEVfQllURVMtMSkpJn4oTDFfQ0FDSEVfQllURVMtMSkpCgojZGVmaW5l ICAgICAgICBTTVBfQ0FDSEVfQllURVMgTDFfQ0FDSEVfQllURVMKCiNlbmRpZiAvKiBfX0FTTV9N SVBTX0NBQ0hFX0ggKi8K ------=_NextPart_000_0083_01BFFC6C.24323180 Content-Type: application/octet-stream; name="cpu.h" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="cpu.h" LyogJElkOiBjcHUuaCx2IDEuNSAyMDAwLzAyLzE2IDIxOjQ2OjI5IGtldmluayBFeHAgJAogKiBj cHUuaDogVmFsdWVzIG9mIHRoZSBQUklkIHJlZ2lzdGVyIHVzZWQgdG8gbWF0Y2ggdXAKICogICAg ICAgIHZhcmlvdXMgTUlQUyBjcHUgdHlwZXMuCiAqCiAqIENvcHlyaWdodCAoQykgMTk5NiBEYXZp ZCBTLiBNaWxsZXIgKGRtQGVuZ3Iuc2dpLmNvbSkKICoKICovCi8qKioqKioqKioqKioqKioqKioq KioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKgog KiAgNyBEZWMsIDE5OTkuCiAqICBBZGRlZCA0S0MgYW5kIDVLQyBQUl9JRCBjb2RlcywgYW5kIGRl ZmluZWQgbWlwc19jcHUgZGF0YSBzdHJ1Y3R1cmUKICogIGFuZCBmaWVsZCBlbmNvZGluZ3MuCiAq CiAqICBLZXZpbiBELiBLaXNzZWxsLCBrZXZpbmtAbWlwcy5jb20KICogIENvcHlyaWdodCAoQykg MTk5OSBNSVBTIFRlY2hub2xvZ2llcywgSW5jLiAgQWxsIHJpZ2h0cyByZXNlcnZlZC4KICoqKioq KioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioqKioq KioqKioqKioqKiovCgojaWZuZGVmIF9NSVBTX0NQVV9ICiNkZWZpbmUgX01JUFNfQ1BVX0gKCi8q CiAqIEFzc2lnbmVkIHZhbHVlcyBmb3IgdGhlIHByb2R1Y3QgSUQgcmVnaXN0ZXIuICBJbiBvcmRl ciB0byBkZXRlY3QgYQogKiBjZXJ0YWluIENQVSB0eXBlIGV4YWN0bHkgZXZlbnR1YWxseSBhZGRp dGlvbmFsIHJlZ2lzdGVycyBtYXkgbmVlZCB0bwogKiBiZSBleGFtaW5lZC4KICovCiNkZWZpbmUg UFJJRF9JTVBfUjIwMDAgICAgMHgwMTAwCiNkZWZpbmUgUFJJRF9JTVBfUjMwMDAgICAgMHgwMjAw CiNkZWZpbmUgUFJJRF9JTVBfUjYwMDAgICAgMHgwMzAwCiNkZWZpbmUgUFJJRF9JTVBfUjQwMDAg ICAgMHgwNDAwCiNkZWZpbmUgUFJJRF9JTVBfUjYwMDBBICAgMHgwNjAwCiNkZWZpbmUgUFJJRF9J TVBfUjEwMDAwICAgMHgwOTAwCiNkZWZpbmUgUFJJRF9JTVBfUjQzMDAgICAgMHgwYjAwCiNkZWZp bmUgUFJJRF9JTVBfUjgwMDAgICAgMHgxMDAwCiNkZWZpbmUgUFJJRF9JTVBfUjQ2MDAgICAgMHgy MDAwCiNkZWZpbmUgUFJJRF9JTVBfUjQ3MDAgICAgMHgyMTAwCiNkZWZpbmUgUFJJRF9JTVBfUjQ2 NDAgICAgMHgyMjAwCiNkZWZpbmUgUFJJRF9JTVBfUjQ2NTAgICAgMHgyMjAwCQkvKiBTYW1lIGFz IFI0NjQwICovCiNkZWZpbmUgUFJJRF9JTVBfUjUwMDAgICAgMHgyMzAwCiNkZWZpbmUgUFJJRF9J TVBfU09OSUMgICAgMHgyNDAwCiNkZWZpbmUgUFJJRF9JTVBfTUFHSUMgICAgMHgyNTAwCiNkZWZp bmUgUFJJRF9JTVBfUk03MDAwICAgMHgyNzAwCiNkZWZpbmUgUFJJRF9JTVBfTkVWQURBICAgMHgy ODAwCQkvKiBSTTUyNjAgPz8/ICovCiNkZWZpbmUgUFJJRF9JTVBfNEtDICAgICAgMHg4MDAwCiNk ZWZpbmUgUFJJRF9JTVBfNUtDICAgICAgMHg4MTAwCgojZGVmaW5lIFBSSURfSU1QX1VOS05PV04g IDB4ZmYwMAoKI2RlZmluZSBQUklEX1JFVl9SNDQwMCAgICAweDAwNDAKI2RlZmluZSBQUklEX1JF Vl9SMzAwMEEgICAweDAwMzAKI2RlZmluZSBQUklEX1JFVl9SMzAwMCAgICAweDAwMjAKI2RlZmlu ZSBQUklEX1JFVl9SMjAwMEEgICAweDAwMTAKCgojaW5jbHVkZSA8YXNtL2NhY2hlLmg+CgojaWZu ZGVmICBfTEFOR1VBR0VfQVNTRU1CTFkKLyoKICogQ2FwYWJpbGl0eSBhbmQgZmVhdHVyZSBkZXNj cmlwdG9yIHN0cnVjdHVyZSBmb3IgTUlQUyBDUFUKICovCgpzdHJ1Y3QgbWlwc19jcHUgewoJdW5z aWduZWQgaW50IHByb2Nlc3Nvcl9pZDsKCXVuc2lnbmVkIGludCBjcHV0eXBlOwkJLyogT2xkICJt aXBzX2NwdXR5cGUiIGNvZGUgKi8KCWludCBpc2FfbGV2ZWw7CglpbnQgb3B0aW9uczsKCWludCB0 bGJzaXplOwoJc3RydWN0IGNhY2hlX2Rlc2MgaWNhY2hlOwkvKiBQcmltYXJ5IEktY2FjaGUgKi8K CXN0cnVjdCBjYWNoZV9kZXNjIGRjYWNoZTsJLyogUHJpbWFyeSBEIG9yIGNvbWJpbmVkIEkvRCBj YWNoZSAqLwoJc3RydWN0IGNhY2hlX2Rlc2Mgc2NhY2hlOwkvKiBTZWNvbmRhcnkgY2FjaGUgKi8K CXN0cnVjdCBjYWNoZV9kZXNjIHRjYWNoZTsJLyogVGVydGlhcnkvc3BsaXQgc2Vjb25kYXJ5IGNh Y2hlICovCn07CgojZW5kaWYKCi8qCiAqIElTQSBMZXZlbCBlbmNvZGluZ3MgCiAqLwoKI2RlZmlu ZSBNSVBTX0NQVV9JU0FfSQkJMHgwMDAwMDAwMQojZGVmaW5lIE1JUFNfQ1BVX0lTQV9JSQkJMHgw MDAwMDAwMgojZGVmaW5lIE1JUFNfQ1BVX0lTQV9JSUkJMHgwMDAwMDAwMwojZGVmaW5lIE1JUFNf Q1BVX0lTQV9JVgkJMHgwMDAwMDAwNAojZGVmaW5lIE1JUFNfQ1BVX0lTQV9WCQkweDAwMDAwMDA1 CiNkZWZpbmUgTUlQU19DUFVfSVNBX00zMgkweDAwMDAwMDIwCiNkZWZpbmUgTUlQU19DUFVfSVNB X002NAkweDAwMDAwMDQwCgovKgogKiBDUFUgT3B0aW9uIGVuY29kaW5ncyAKICovIAoKI2RlZmlu ZSBNSVBTX0NQVV9UTEIJMHgwMDAwMDAwMQkvKiBDUFUgaGFzIFRMQiAqLwovKiBMZWF2ZSBhIHNw YXJlIGJpdCBmb3IgdmFyaWFudCBNTVUgdHlwZXMuLi4gKi8KI2RlZmluZSBNSVBTX0NQVV80S0VY CTB4MDAwMDAwMDQJLyogIlI0SyIgZXhjZXB0aW9uIG1vZGVsICovCiNkZWZpbmUgTUlQU19DUFVf NEtUTEIJMHgwMDAwMDAwOAkvKiAiUjRLIiBUTEIgaGFuZGxlciAqLwojZGVmaW5lIE1JUFNfQ1BV X0ZQVQkweDAwMDAwMDEwCS8qIENQVSBoYXMgRlBVICovCiNkZWZpbmUgTUlQU19DUFVfMzJGUFIJ MHgwMDAwMDAyMAkvKiAzMiBkYmwuIHByZWMuIEZQIHJlZ2lzdGVycyAqLwojZGVmaW5lIE1JUFNf Q1BVX0NPVU5URVIgMHgwMDAwMDA0MAkvKiBDeWNsZSBjb3VudC9jb21wYXJlICovCiNkZWZpbmUg TUlQU19DUFVfV0FUQ0gJMHgwMDAwMDA4MAkvKiB3YXRjaHBvaW50IHJlZ2lzdGVycyAqLwojZGVm aW5lIE1JUFNfQ1BVX01JUFMxNgkweDAwMDAwMTAwCS8qIGNvZGUgY29tcHJlc3Npb24gKi8KI2Rl ZmluZSBNSVBTX0NQVV9ESVZFQwkweDAwMDAwMjAwCS8qIGRlZGljYXRlZCBpbnRlcnJ1cHQgdmVj dG9yICovCiNkZWZpbmUgTUlQU19DUFVfVkNFCTB4MDAwMDA0MDAJLyogdmlydC4gY29oZXJlbmNl IGNvbmZsaWN0IHBvc3NpYmxlICovCiNkZWZpbmUgTUlQU19DUFVfQ0FDSEVfQ0RFWCAweDAwMDAw ODAwCS8qIENyZWF0ZV9EaXJ0eV9FeGNsdXNpdmUgQ0FDSEUgb3AgKi8KCiNlbmRpZiAvKiAhKF9N SVBTX0NQVV9IKSAqLwo= ------=_NextPart_000_0083_01BFFC6C.24323180 Content-Type: application/octet-stream; name="cpu_probe.c" Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename="cpu_probe.c" LyogJElkOiBjcHVfcHJvYmUuYyx2IDEuMTEgMjAwMC8wNy8wNyAwOTowMjozNiBjYXJzdGVubCBF eHAgJCAKICoKICogY3B1X3Byb2JlLmMKICoKICogS2V2aW4gRC4gS2lzc2VsbCwga2V2aW5rQG1p cHMuY29tCiAqIENvcHlyaWdodCAoQykgMTk5OSwyMDAwIE1JUFMgVGVjaG5vbG9naWVzLCBJbmMu ICBBbGwgcmlnaHRzIHJlc2VydmVkLgogKgogKiAjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMj IyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMKICoKICogIFRoaXMg cHJvZ3JhbSBpcyBmcmVlIHNvZnR3YXJlOyB5b3UgY2FuIGRpc3RyaWJ1dGUgaXQgYW5kL29yIG1v ZGlmeSBpdAogKiAgdW5kZXIgdGhlIHRlcm1zIG9mIHRoZSBHTlUgR2VuZXJhbCBQdWJsaWMgTGlj ZW5zZSAoVmVyc2lvbiAyKSBhcwogKiAgcHVibGlzaGVkIGJ5IHRoZSBGcmVlIFNvZnR3YXJlIEZv dW5kYXRpb24uCiAqCiAqICBUaGlzIHByb2dyYW0gaXMgZGlzdHJpYnV0ZWQgaW4gdGhlIGhvcGUg aXQgd2lsbCBiZSB1c2VmdWwsIGJ1dCBXSVRIT1VUCiAqICBBTlkgV0FSUkFOVFk7IHdpdGhvdXQg ZXZlbiB0aGUgaW1wbGllZCB3YXJyYW50eSBvZiBNRVJDSEFOVEFCSUxJVFkgb3IKICogIEZJVE5F U1MgRk9SIEEgUEFSVElDVUxBUiBQVVJQT1NFLiAgU2VlIHRoZSBHTlUgR2VuZXJhbCBQdWJsaWMg TGljZW5zZQogKiAgZm9yIG1vcmUgZGV0YWlscy4KICoKICogIFlvdSBzaG91bGQgaGF2ZSByZWNl aXZlZCBhIGNvcHkgb2YgdGhlIEdOVSBHZW5lcmFsIFB1YmxpYyBMaWNlbnNlIGFsb25nCiAqICB3 aXRoIHRoaXMgcHJvZ3JhbTsgaWYgbm90LCB3cml0ZSB0byB0aGUgRnJlZSBTb2Z0d2FyZSBGb3Vu ZGF0aW9uLCBJbmMuLAogKiAgNTkgVGVtcGxlIFBsYWNlIC0gU3VpdGUgMzMwLCBCb3N0b24gTUEg MDIxMTEtMTMwNywgVVNBLgogKgogKiAjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMj IyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMjIyMKICoKICogQyBjb2RlLCBjYWxs ZWQgZnJvbSBzdGFydHVwIHZlY3RvciB0byBkZWNvZGUgdGhlIENQVSBjb25maWd1cmF0aW9uIGFu ZCAKICogc2V0IHVwIHRoZSBtaXBzX2NwdSBkYXRhIHN0cnVjdHVyZSwgdXNlZCBieSB0aGUga2Vy bmVsIHRvIGFic3RyYWN0IG91dCAKICogbW9zdCBpbXBsZW1lbnRhdGlvbiBvcHRpb25zIG9mIE1J UFMgQ1BVcy4KICoKICovCgojaW5jbHVkZSA8YXNtL2NwdS5oPgojaW5jbHVkZSA8YXNtL2Jvb3Rp bmZvLmg+CiNpbmNsdWRlIDxhc20vaW5pdC5oPgoKI2luY2x1ZGUgPGxpbnV4L2NvbmZpZy5oPgoK I2lmZGVmIENPTkZJR19DUFVfTUlQUzMyCmV4dGVybiB2b2lkIG1pcHMzMl9jcHVfcHJvYmUodW5z aWduZWQgaW50IHByX2lkKTsKI2VuZGlmCgovKiBkZWNsYXJhdGlvbiBvZiB0aGUgZ2xvYmFsIHN0 cnVjdCAqLwpzdHJ1Y3QgbWlwc19jcHUgbWlwc19jcHUgPSB7UFJJRF9JTVBfVU5LTk9XTiwgQ1BV X1VOS05PV04sIDAsIDAsIDAsCgkJCQl7MCwwLDAsMH0sIHswLDAsMCwwfSwgezAsMCwwLDB9LCB7 MCwwLDAsMH19OwoKLyogU2hvcnRjdXQgZm9yIGFzc2VtYmxlciBhY2Nlc3MgdG8gbWlwc19jcHUu b3B0aW9ucyAqLwoKaW50ICpjcHVvcHRpb25zID0gJm1pcHNfY3B1Lm9wdGlvbnM7CgovKgogKiBD YW5uZWQgZGVzY3JpcHRvcnMgb2YgTUlQUyBDUFVzLiBOb3RlIHRoYXQgZm9yIHRoZSBjb2RlIGJl bG93CiAqIHRvIGZ1bmN0aW9uIGNvcnJlY3RseSwgYSBnZW5lcmljIGRlc2NyaXB0aW9uIHdpdGgg YSBwcm9jZXNzb3JfaWQKICogdmFsdWUgd2l0aCBubyBpbXBsZW1lbnRhdGlvbiBiaXRzIHNldCBt dXN0IGZvbGxvdyBhbnkgZGVzY3JpcHRpb25zCiAqIG9mIGRpc3RpbmN0IHZhcmlhbnQgcmV2aXN0 aW9ucywgaS5lLiBSNDAwMCBtdXN0IHByZWNlZGUgUjQ0MDAsCiAqIFIzMDAwIG11c3QgcHJlY2Vk ZSBSMzAwMEEuICBNYW55IENQVXMgYXJlIG5vdCByZWZsZWN0ZWQgaW4KICogdGhlIGxpc3QuICBO ZXcgZW50cmllcyByZXF1aXJlIHRoZSBhZGR0aW9uIG9mIFBSX0lEIHJlZ2lzdGVyCiAqIGRhdGEg aW4gYXNtL2NwdS5oIGFuZCBhc3NpZ25tZW50IG9mIGEgQ1BVXyBjb2RlIGluIGFzbS9ib290aW5m by5oLgogKiBUaGUgbWlwc19jcHUgc3RydWN0dXJlIGlzIGRlZmluZWQgaW4gYXNtL2NwdS5oIGFu ZCBhc20vY2FjaGUuaC4KICovCgovKgogKiBTb21lIG9wdGlvbnMgYXJlIGNvbW1vbiBhY3Jvc3Mg YWxsIFI0MDAwIGRlcml2YXRpdmVzCiAqLwoKI2RlZmluZSBSNEtfT1BUUyAoTUlQU19DUFVfVExC IHwgTUlQU19DUFVfNEtFWCB8IE1JUFNfQ1BVXzRLVExCIFwKCQl8IE1JUFNfQ1BVX0NPVU5URVIg fCBNSVBTX0NQVV9DQUNIRV9DREVYICkKCnN0YXRpYyBzdHJ1Y3QgbWlwc19jcHUgX19pbml0ZGF0 YSBtaXBzX2NwdV90ZW1wbGF0ZVtdID0gewoJLyogUjIwMDAgKi8KCXsgUFJJRF9JTVBfUjIwMDAs IAkvKiBQUl9JRCByZWdpc3RlciB2YWx1ZSAqLwoJICBDUFVfUjIwMDAsIAkJLyogS2VybmVsIGlu dGVybmFsIENQVSBpZGVudGlmaWVyICovCgkgIE1JUFNfQ1BVX0lTQV9JLCAJLyogTUlQUyBJU0Eg bGV2ZWwgKi8KCSAgTUlQU19DUFVfVExCLCAJLyogRmxhZ3MgZm9yIGltcGxlbWVudGF0aW9uIG9w dGlvbnMgKi8KCSAgMzIsCQkJLyogTnVtYmVyIG9mIFRMQiBlbnRyaWVzICovCgkgIHswLDAsMCww fSwgCQkvKiBJLWNhY2hlIGxpbmUgc2l6ZSwgI3NldHMsICN3YXlzLCBmbGFncyAqLwoJICB7MCww LDAsTUlQU19DQUNIRV9ORUVEU19DT05GSUd9LCAvKiBVbmlmaWVkL0QtY2FjaGUgZGVzY3JpcHRv ciAqLwoJICB7MCwwLDAsMH0sIAkJLyogUy1jYWNoZSBkZXNjcmlwdG9yICovCgkgIHswLDAsMCww fX0sCQkvKiBUZXJ0aWFyeSBjYWNoZSBkZXNjcmlwdG9yICovCgkvKiBNSVBTIDRLYyAqLwoJeyBQ UklEX0lNUF80S0MsIENQVV80S0MsICBNSVBTX0NQVV9JU0FfTTMyLCBNSVBTX0NQVV9UTEIgfCAK CSAgICAgICAgTUlQU19DUFVfNEtFWCB8IE1JUFNfQ1BVXzRLVExCIHwgTUlQU19DUFVfQ09VTlRF UiB8IAoJICAgICAgICBNSVBTX0NQVV9ESVZFQyB8IE1JUFNfQ1BVX1dBVENILCAxNiwgCgkgICAg ICAgIHsxNiwgMjU2LCA0LCAwfSwgezE2LCAyNTYsIDQsIDB9LCB7MCwwLDAsMH0sIHswLDAsMCww fX0sCgkvKiBNSVBTIDVLYyAqLwoJeyBQUklEX0lNUF81S0MsIENQVV81S0MsICBNSVBTX0NQVV9J U0FfTTY0LCBNSVBTX0NQVV9UTEIgfCAKCSAgICAgICAgTUlQU19DUFVfNEtFWCB8IE1JUFNfQ1BV XzRLVExCIHwgTUlQU19DUFVfQ09VTlRFUiB8IAoJICAgICAgICBNSVBTX0NQVV9ESVZFQyB8IE1J UFNfQ1BVX1dBVENILCAzMiwKCSAgICAgICAgezMyLCAxMjgsIDQsIDB9LCB7MzIsIDEyOCwgNCwg MH0sIHswLDAsMCwwfSwgezAsMCwwLDB9fSwKCS8qIFIzMDAwICovCgl7IFBSSURfSU1QX1IzMDAw LCBDUFVfUjMwMDAsIE1JUFNfQ1BVX0lTQV9JLCBNSVBTX0NQVV9UTEIsIDMyLAoJCXswLCAwLCAw LCAwfSwgezAsIDAsIDAsIE1JUFNfQ0FDSEVfTkVFRFNfQ09ORklHfSwgCgkJezAsMCwwLDB9LCB7 MCwwLDAsMH19LAoJLyogUjMwMDBBICovCgl7IFBSSURfSU1QX1IzMDAwIHwgUFJJRF9SRVZfUjMw MDBBLCBDUFVfUjMwMDBBLCAKCQlNSVBTX0NQVV9JU0FfSSwgTUlQU19DUFVfVExCLCAzMiwKCQl7 MCwgMCwgMCwgMH0sIHswLCAwLCAwLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sIAoJCXswLDAs MCwwfSwgezAsMCwwLDB9fSwKCS8qIFI2MDAwICovCgl7IFBSSURfSU1QX1I2MDAwLCBDUFVfUjYw MDAsIE1JUFNfQ1BVX0lTQV9JSSwgCgkJTUlQU19DUFVfVExCIHwgTUlQU19DUFVfRlBVLCAzMiwK CQl7MCwgMCwgMCwgMH0sIHswLCAwLCAwLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sIAoJCXsw LDAsMCwwfSwgezAsMCwwLDB9fSwKCS8qIFI2MDAwQSAqLwoJeyBQUklEX0lNUF9SNjAwMEEsIENQ VV9SNjAwMEEsIE1JUFNfQ1BVX0lTQV9JSSwgCgkJTUlQU19DUFVfVExCIHwgTUlQU19DUFVfRlBV LCAzMiwKCQl7MCwgMCwgMCwgMH0sIHswLCAwLCAwLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30s IAoJCXswLDAsMCwwfSwgezAsMCwwLDB9fSwKCS8qIFI0MDAwU0MgKi8KCXsgUFJJRF9JTVBfUjQw MDAsIENQVV9SNDAwMFNDLCBNSVBTX0NQVV9JU0FfSUlJLCAKCSAgICBSNEtfT1BUUyB8IE1JUFNf Q1BVX0ZQVSB8IE1JUFNfQ1BVXzMyRlBSIAoJICAgIHwgTUlQU19DUFVfV0FUQ0ggfCBNSVBTX0NQ VV9WQ0UsIDQ4LAoJCXswLCAwLCAxLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sIAoJCXswLCAw LCAxLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sCgkJezAsMCwxLE1JUFNfQ0FDSEVfTkVFRFNf Q09ORklHfSwgezAsMCwwLDB9fSwKCS8qIFI0NDAwU0MgKi8KCXsgUFJJRF9JTVBfUjQwMDAgfCBQ UklEX1JFVl9SNDQwMCwgQ1BVX1I0NDAwU0MsIE1JUFNfQ1BVX0lTQV9JSUksIAoJICAgIFI0S19P UFRTIHwgTUlQU19DUFVfRlBVIHwgTUlQU19DUFVfMzJGUFIgCgkgICAgfCBNSVBTX0NQVV9XQVRD SCB8IE1JUFNfQ1BVX1ZDRSwgNDgsCgkJezAsIDAsIDEsIE1JUFNfQ0FDSEVfTkVFRFNfQ09ORklH fSwgCgkJezAsIDAsIDEsIE1JUFNfQ0FDSEVfTkVFRFNfQ09ORklHfSwKCQl7MCwwLDEsIE1JUFNf Q0FDSEVfTkVFRFNfQ09ORklHfSwgezAsMCwwLDB9fSwKCS8qIFI0MzAwICovCgl7IFBSSURfSU1Q X1I0MzAwLCBDUFVfUjQzMDAsIE1JUFNfQ1BVX0lTQV9JSUksIAoJICAgIFI0S19PUFRTIHwgTUlQ U19DUFVfRlBVIHwgTUlQU19DUFVfMzJGUFIgfCBNSVBTX0NQVV9XQVRDSCwgMzIsCgkJezMyLCA1 MTIsIDEsIE1JUFNfQ0FDSEVfTkVFRFNfQ09ORklHfSwgCgkJezE2LCA1MTIsIDEsIE1JUFNfQ0FD SEVfTkVFRFNfQ09ORklHfSwgCgkJezAsMCwwLDB9LCB7MCwwLDAsMH19LAoJLyogUjQ2MDAgKi8K CXsgUFJJRF9JTVBfUjQ2MDAsIENQVV9SNDYwMCwgTUlQU19DUFVfSVNBX0lJSSwgCgkgICAgUjRL X09QVFMgfCBNSVBTX0NQVV9GUFUsIDQ4LAoJCXszMiwgMTI4LCAyLCBNSVBTX0NBQ0hFX05FRURT X0NPTkZJR30sIAoJCXszMiwgMTI4LCAyLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sIAoJCXsw LDAsMCwwfSwgezAsMCwwLDB9fSwKCS8qIFI0NjUwICovCgl7IFBSSURfSU1QX1I0NjUwLCBDUFVf UjQ2NTAsIE1JUFNfQ1BVX0lTQV9JSUksIAoJICAgIFI0S19PUFRTIHwgTUlQU19DUFVfRlBVLCA0 OCwKCQl7MzIsIDEyOCwgMiwgTUlQU19DQUNIRV9ORUVEU19DT05GSUd9LCAKCQl7MzIsIDEyOCwg MiwgTUlQU19DQUNIRV9ORUVEU19DT05GSUd9LCAKCQl7MCwwLDAsMH0sIHswLDAsMCwwfX0sCgkv KiBSNDcwMCAqLwoJeyBQUklEX0lNUF9SNDcwMCwgQ1BVX1I0NzAwLCBNSVBTX0NQVV9JU0FfSUlJ LCAKCSAgICBSNEtfT1BUUyB8IE1JUFNfQ1BVX0ZQVSB8IE1JUFNfQ1BVXzMyRlBSLCA0OCwKCQl7 MzIsIDI1NiwgMiwgTUlQU19DQUNIRV9ORUVEU19DT05GSUd9LCAKCQl7MzIsIDI1NiwgMiwgTUlQ U19DQUNIRV9ORUVEU19DT05GSUd9LCAKCQl7MCwwLDAsMH0sIHswLDAsMCwwfX0sCgkvKiBSNTAw MCAqLwoJeyBQUklEX0lNUF9SNTAwMCwgQ1BVX1I1MDAwLCBNSVBTX0NQVV9JU0FfSVYsIAoJICAg IFI0S19PUFRTIHwgTUlQU19DUFVfRlBVIHwgTUlQU19DUFVfMzJGUFIsIDQ4LAoJCXszMiwgNTEy LCAyLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sIAoJCXszMiwgNTEyLCAyLCBNSVBTX0NBQ0hF X05FRURTX0NPTkZJR30sCgkJezAsMCwwLE1JUFNfQ0FDSEVfTkVFRFNfQ09ORklHfSwgezAsMCww LDB9fSwKCS8qIFI1Mnh4LiBDYWNoZSBzaXplIHZhcmllcyB3aXRoIHJldmlzaW9uICovCgl7IFBS SURfSU1QX05FVkFEQSwgQ1BVX05FVkFEQSwgTUlQU19DUFVfSVNBX0lWLCAKCSAgICBSNEtfT1BU UyB8IE1JUFNfQ1BVX0ZQVSB8IE1JUFNfQ1BVXzMyRlBSIHwgTUlQU19DUFVfRElWRUMsIDQ4LAoJ CXswLCAwLCAyLCBNSVBTX0NBQ0hFX05FRURTX0NPTkZJR30sIHswLCAwLCAyLCBNSVBTX0NBQ0hF X05FRURTX0NPTkZJR30sCgkJezAsMCwwLDB9LCB7MCwwLDAsMH19LAoJLyogUjgwMDAgLSBoYXMg d2llcmQgVExCOiAzLXdheSB4IDEyOCAqLwoJeyBQUklEX0lNUF9SODAwMCwgQ1BVX1I4MDAwLCBN SVBTX0NQVV9JU0FfSVYsIAoJICAgIE1JUFNfQ1BVX1RMQiB8IE1JUFNfQ1BVXzRLRVggfCBNSVBT X0NQVV9GUFUgfCBNSVBTX0NQVV8zMkZQUiwgMzg0LAoJCXszMiwgNTEyLCAxLCBNSVBTX0NBQ0hF X1ZJUlRVQUx9LCB7MzIsIDUxMiwgMSwgMH0sCgkJezAsMCwwLE1JUFNfQ0FDSEVfTkVFRFNfQ09O RklHfSwgezAsMCwwLDB9fSwKCS8qIFIxMDAwMCAqLwoJeyBQUklEX0lNUF9SMTAwMDAsIENQVV9S MTAwMDAsIE1JUFNfQ1BVX0lTQV9JViwgCgkgICAgTUlQU19DUFVfVExCIHwgTUlQU19DUFVfNEtF WCB8IE1JUFNfQ1BVX0ZQVSAKCSAgICB8IE1JUFNfQ1BVXzMyRlBSIHwgTUlQU19DUFVfQ09VTlRF UiB8IE1JUFNfQ1BVX1dBVENILCA2NCwKCQl7MzIsIDUxMiwgMiwgMH0sIHszMiwgNTEyLCAyLCAw fSwgCgkJezAsMCwwLE1JUFNfQ0FDSEVfTkVFRFNfQ09ORklHfSwgezAsMCwwLDB9fSwKfTsKCi8q CiAqIFRoaXMgZnVuY3Rpb24gaXMgcnVubmluZyBvbiB0aGUgYm9vdCBwcm9tIHN0YWNrLiBJdCBz aG91bGQKICogbWluaW1pemUgdXNlIG9mIGR5bmFtaWMgdmFyaWFibGVzIGFuZCBjYWxsIGFuIGFi c29sdXRlCiAqIG1pbmltdW0gb2Ygb3RoZXIgZnVuY3Rpb25zLgogKi8KCl9faW5pdGZ1bmModm9p ZCBtaXBzX2NwdV9wcm9iZSh1bnNpZ25lZCBpbnQgcHJfaWQpKQp7CglpbnQgaTsKCiNpZmRlZiBD T05GSUdfQ1BVX01JUFMzMgoJLyoKCSAqIElmIGhpZ2gtb3JkZXIgaGFsZndvcmQgbm9uLXplcm8s IHVzZSBNSVBTMzIgbWVjaGFuaXNtCgkgKi8KCWlmKChwcl9pZCA+PiAxNikgIT0gMCkgewoJCW1p cHMzMl9jcHVfcHJvYmUocHJfaWQpOwoJCXJldHVybjsKCX0KI2VuZGlmCgoJLyoKCSAqIElmIG9s ZCBlbmNvZGluZyBzY2hlbWUgYW5kIENQVSBpbiB0YWJsZSwgZmluZCBhbmQgY29weS4KCSAqCgkg KiBGaXJzdCB0cnkgZm9yIG1hdGNoIGluY2x1ZGluZyByZXZpc2lvbiBudW1iZXIKCSAqLwoKCWZv cihpPTA7IG1pcHNfY3B1X3RlbXBsYXRlW2ldLnByb2Nlc3Nvcl9pZCAhPSAwOyBpKyspIHsKCQlp ZihtaXBzX2NwdV90ZW1wbGF0ZVtpXS5wcm9jZXNzb3JfaWQgPT0gcHJfaWQpIHsKCQkJbWVtY3B5 KCZtaXBzX2NwdSwgJm1pcHNfY3B1X3RlbXBsYXRlW2ldLAoJCQkJc2l6ZW9mKHN0cnVjdCBtaXBz X2NwdSkpOwoJCQlyZXR1cm47CgkJfQoJfQoKCS8qCgkgKiBUaGF0IGZhaWxpbmcsIGxvb2sgZm9y IG1hdGNoIG9uIGltcGxlbWVudGF0aW9uIG9ubHkKCSAqLwoKCWZvcihpPTA7IG1pcHNfY3B1X3Rl bXBsYXRlW2ldLnByb2Nlc3Nvcl9pZCAhPSAwOyBpKyspIHsKCQlpZigobWlwc19jcHVfdGVtcGxh dGVbaV0ucHJvY2Vzc29yX2lkICYgUFJJRF9JTVBfVU5LTk9XTikKCQkgICAgPT0gKHByX2lkICYg UFJJRF9JTVBfVU5LTk9XTikpIHsKCQkJbWVtY3B5KCZtaXBzX2NwdSwgJm1pcHNfY3B1X3RlbXBs YXRlW2ldLAoJCQkJc2l6ZW9mKHN0cnVjdCBtaXBzX2NwdSkpOwoJCQlyZXR1cm47CgkJfQoJfQoK CS8qCgkgKiBPdGhlcndpc2UgQ1BVIGlzIHVua25vd24gLSBhbGwgYmV0cyBhcmUgb2ZmCgkgKi8K CgltaXBzX2NwdS5wcm9jZXNzb3JfaWQgPSBwcl9pZDsKCW1pcHNfY3B1LmNwdXR5cGUgPSBDUFVf VU5LTk9XTjsKCW1pcHNfY3B1Lm9wdGlvbnMgPSAwOwoJbWlwc19jcHUuaWNhY2hlLmZsYWdzID0g TUlQU19DQUNIRV9ORUVEU19DT05GSUc7CgltaXBzX2NwdS5kY2FjaGUuZmxhZ3MgPSBNSVBTX0NB Q0hFX05FRURTX0NPTkZJRzsKCW1pcHNfY3B1LnNjYWNoZS5mbGFncyA9IE1JUFNfQ0FDSEVfTkVF RFNfQ09ORklHOwoJcmV0dXJuOwp9Cgo= ------=_NextPart_000_0083_01BFFC6C.24323180-- From owner-linux-mips@oss.sgi.com Wed Aug 2 10:09:53 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 10:09:43 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:47115 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 10:09:14 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id KAA04140 for ; Wed, 2 Aug 2000 10:14:38 -0700 (PDT) mail_from (jsun@mvista.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id KAA87606 for ; Wed, 2 Aug 2000 10:08:11 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA72901 for ; Wed, 2 Aug 2000 10:06:26 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA02205 for ; Wed, 2 Aug 2000 10:06:17 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id KAA14494; Wed, 2 Aug 2000 10:05:58 -0700 Message-ID: <398854F5.EB3E73D6@mvista.com> Date: Wed, 02 Aug 2000 10:05:57 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr, ralf@oss.sgi.com Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS References: <008601bffc5b$6714c0a0$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Kevin, This looks great, something exactly I was hoping for! A couple of questions : . What about the actual cache operation routines (flush_cache_page, ...)? Are they divided into R4xxx, R3xx, etc? I guess I am curious how the code is organized. . Your structure gives the number of ways, but no info about how to select a way. How would do an index-based cache operation? It seems to me you probably need something like cache_way_selection_offset in the cpu table. Jun "Kevin D. Kissell" wrote: > > Rather than re-invent the wheel, please consider the > cache descriptor data structures we developed at > MIPS to deal with this problem. I believe that the > updated cache.h file, and maybe even the cpu_probe.c > file, was checked into the 2.2 repository at SGI long ago. > There are also a set of initialisation and invalidation routines > that key off the cache descriptor structure, but those aren't > in the SGI repository (though anyone can get them from > ftp.mips.com or www.paralogos.com). The CPU probe > logic (also on those sites, and already integrated > into several variants because it also supports setting > up state needed by the software FPU emulation) > is table-based, and for each PrID value, there is > a template for the cache characteristics, which > can either be taken "as is" or probed, depending > on a flag in the descriptor. Since the number of > "ways" cannot always be determined by probing, > if the number of ways is specified, it is preserved > even if a cache probe is performed. I won't attach the > full set of cache probe routines (which would only confuse > things), but here is the cache data structure definition > and the CPU descriptor template table that we use. > ... From owner-linux-mips@oss.sgi.com Wed Aug 2 11:14:14 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 11:14:04 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:39960 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 11:13:44 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id LAA05838 for ; Wed, 2 Aug 2000 11:19:05 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id LAA42365 for ; Wed, 2 Aug 2000 11:12:45 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from kenton.algor.co.uk (kenton.algor.co.uk [193.117.190.25]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id LAA02652 for ; Wed, 2 Aug 2000 11:12:43 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from mudchute.algor.co.uk (dom@mudchute.algor.co.uk [193.117.190.19]) by kenton.algor.co.uk (8.8.8/8.8.8) with ESMTP id TAA01458; Wed, 2 Aug 2000 19:12:38 +0100 (GMT/BST) Received: (from dom@localhost) by mudchute.algor.co.uk (8.8.5/8.8.5) id TAA11550; Wed, 2 Aug 2000 19:12:34 +0100 (BST) Date: Wed, 2 Aug 2000 19:12:34 +0100 (BST) Message-Id: <200008021812.TAA11550@mudchute.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Jun Sun Cc: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr, ralf@oss.sgi.com Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS In-Reply-To: <398762B9.D8507860@mvista.com> References: <398762B9.D8507860@mvista.com> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Jun Sun (jsun@mvista.com) writes: > The first issue is multi-way cache support. DDB5476 uses R5432 CPU > which has two-way set-associative cache. The problematic part is > the index-based cache operations in r4xxcache.h does not cover all > ways in a set. > > I think this is a problem in general. So far I have seen MIPS > processors with 2-way, 4-way and 8-way sets. And I have seen them > using ether least- significant-addressing-bits or > most-significant-addressing-bits within a cache line to select ways. So far as I know the Vr5432 is the only CPU to do anything so silly as using the lowest index bits to select the "way". Certainly most CPUs put the "way" bits above the cache-store-index; and MIPS now require it to be done like that for MIPS32 and MIPS64 compatible parts. The MS-selects-way organisation permits the cache to be initialised without the software ever needing to know how many ways it has (just crank the index up, but being careful about the tendency to recycle the same way when pre-filling cache data). Cache maintenance should always use "hit" type instructions, and you don't need to know the cache organisation for those, even with the Vr5432. I suggest you should implement the don't-care method, and then have a cpu_info-driven special case for the unique and deprecated Vr5432. Dominic Sweetman Algorithmics Ltd dom@algor.co.uk From owner-linux-mips@oss.sgi.com Wed Aug 2 11:15:14 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 11:15:04 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:61720 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 11:14:41 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id LAA04652 for ; Wed, 2 Aug 2000 11:20:05 -0700 (PDT) mail_from (kevink@mips.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id LAA95454 for ; Wed, 2 Aug 2000 11:13:54 -0700 (PDT) mail_from (kevink@mips.com) Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id LAA02909 for ; Wed, 2 Aug 2000 11:13:54 -0700 (PDT) mail_from (kevink@mips.com) Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id LAA03103; Wed, 2 Aug 2000 11:12:42 -0700 (PDT) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id LAA28193; Wed, 2 Aug 2000 11:12:42 -0700 (PDT) Message-ID: <01ac01bffcad$a767c240$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" Cc: , , Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS Date: Wed, 2 Aug 2000 20:15:24 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing -->A couple of questions : > >. What about the actual cache operation routines (flush_cache_page, >...)? Are they divided into R4xxx, R3xx, etc? I guess I am curious how >the code is organized. We kept pretty much the existing 2.2 structure for these things. We created the module "r4k.c" in arch/mips/mm which was essentially parallel to the old r4xx0.c module, but which implemented the various TLB and cache functions (a) using the information in the mips_cpu structure wherever it made sense and (b) in ways that are fully compatible with the "MIPS32" ISA+CP0 model as well as with the original R4000 family and its descendants. It's possible to write code that is compatible with an R4000 but not MIPS32, and vice versa, but they are 99% identical. >. Your structure gives the number of ways, but no info about how to >select a way. How would do an index-based cache operation? It seems to >me you probably need something like cache_way_selection_offset in the >cpu table. The MIPS32 spec for the CACHE instruction gives a trivial mapping from sets/ways/linesize into CACHE instruction operands. In fact, the same technique works for most pre MIPS32 multi-way caches as well. The only exception that comes to mind is the R10000. If one wanted to support the R10K or other oddball CACHE-implementations in this system, I would suggest adding a MIPS_CACHE_R10KWAYSEL or some flag to the flags field of the cache descriptor, and tweaking any routines that need to select indices (such a routine to hunt down and kill all possible virtual aliases of an address) to handle the special case. The primitives in Linux 2.2 did not require much knowedge of multi-way caches as such - they could all be implemented either using hit-based CACHE operations, or by cycling through all possible indices using knowledge of the total size and the line size. But the newer synthesizable MIPS cores allow cache configurations to be "dialed in" in ways that the old code could not handle. The CPUs themselves can be interrogated to determine the line size/nways/nsets geometry, so we mirror that in the Linux code and use those parameters to compute total size, way size, etc. The PrID-based lookup table and the dynamic probe routines are there to allow older parts to use the same mechanisms. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Aug 2 11:36:23 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 11:36:03 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:4636 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 11:35:35 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id LAA08923 for ; Wed, 2 Aug 2000 11:40:58 -0700 (PDT) mail_from (kevink@mips.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id LAA23562 for ; Wed, 2 Aug 2000 11:34:47 -0700 (PDT) mail_from (kevink@mips.com) Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id LAA00027 for ; Wed, 2 Aug 2000 11:34:46 -0700 (PDT) mail_from (kevink@mips.com) Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id LAA03354; Wed, 2 Aug 2000 11:33:34 -0700 (PDT) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id LAA29718; Wed, 2 Aug 2000 11:33:34 -0700 (PDT) Message-ID: <01c901bffcb0$922057a0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Dominic Sweetman" , "Jun Sun" Cc: , , Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS Date: Wed, 2 Aug 2000 20:36:17 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Dom Sweetman writes: >So far as I know the Vr5432 is the only CPU to do anything so silly as >using the lowest index bits to select the "way". Alas, the R10000 does the same silly thing, and while you and I might not consider such a venerable processor interesting for new embedded MIPS/Linux designs, our friends who are trying to replace IRIX with Linux on their SGI boxes are going to have to deal with them for a little while longer. >The MS-selects-way organisation permits the cache to be initialised >without the software ever needing to know how many ways it has (just >crank the index up, but being careful about the tendency to recycle >the same way when pre-filling cache data). Which is why MIPS belatedly documented it as the "correct" way to design a multiway cache... >Cache maintenance should always use "hit" type instructions, and you >don't need to know the cache organisation for those, even with the >Vr5432. The counterargument to *always* using "hit" ops is that they generate TLB traffic and TLB refills, which some people find annoying to allow for and in any case time consuming. Regards, Kevin K. From owner-linux-mips@oss.sgi.com Wed Aug 2 14:41:54 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 14:41:44 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:25137 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 14:41:12 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id OAA18989 for ; Wed, 2 Aug 2000 14:33:07 -0700 (PDT) mail_from (jsun@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA58583 for ; Wed, 2 Aug 2000 14:40:11 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA06345 for ; Wed, 2 Aug 2000 14:40:04 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id OAA25892; Wed, 2 Aug 2000 14:38:52 -0700 Message-ID: <398894EC.233BB004@mvista.com> Date: Wed, 02 Aug 2000 14:38:52 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: Dominic Sweetman CC: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr, ralf@oss.sgi.com Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS References: <398762B9.D8507860@mvista.com> <200008021812.TAA11550@mudchute.algor.co.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Dominic Sweetman wrote: > > Jun Sun (jsun@mvista.com) writes: > > > The first issue is multi-way cache support. DDB5476 uses R5432 CPU > > which has two-way set-associative cache. The problematic part is > > the index-based cache operations in r4xxcache.h does not cover all > > ways in a set. > > > > I think this is a problem in general. So far I have seen MIPS > > processors with 2-way, 4-way and 8-way sets. And I have seen them > > using ether least- significant-addressing-bits or > > most-significant-addressing-bits within a cache line to select ways. > > So far as I know the Vr5432 is the only CPU to do anything so silly as > using the lowest index bits to select the "way". Actually Sony's R4500 uses the same low bits mechanism. > Cache maintenance should always use "hit" type instructions, and you > don't need to know the cache organisation for those, even with the > Vr5432. > Ideally - but no in reality. Linux stills uses index-operations a lot. Theorically, indexed flush is faster if the flushing are is bigger than the cache size. > I suggest you should implement the don't-care method, and then have a > cpu_info-driven special case for the unique and deprecated Vr5432. > If Vr5432 is really that unique, I think that is probably best way, at least for now. Jun From owner-linux-mips@oss.sgi.com Wed Aug 2 14:52:24 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 14:52:14 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:20788 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 14:51:38 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id OAA20421 for ; Wed, 2 Aug 2000 14:43:34 -0700 (PDT) mail_from (jsun@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA99309 for ; Wed, 2 Aug 2000 14:50:50 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA04469 for ; Wed, 2 Aug 2000 14:50:39 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id OAA26491; Wed, 2 Aug 2000 14:50:19 -0700 Message-ID: <3988979B.D264F549@mvista.com> Date: Wed, 02 Aug 2000 14:50:19 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr, ralf@oss.sgi.com Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS References: <01ac01bffcad$a767c240$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Kevin D. Kissell" wrote: > It's possible to write code that is compatible with an R4000 but > not MIPS32, and vice versa, but they are 99% identical. > Kevin, Is that possible you can list the 1% difference here? I have always been confused by MIPS32/MIPS64 vs R3000/R4000/etc. (And on top of it, there is also MIPS I, II, III, IV, etc...). I am sure I am not the only one. If you can give an pointer that will clarify names, that would be good too. Jun From owner-linux-mips@oss.sgi.com Wed Aug 2 15:44:03 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 15:43:53 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:24124 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 15:43:28 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id PAA09939 for ; Wed, 2 Aug 2000 15:48:51 -0700 (PDT) mail_from (kevink@mips.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA83501 for ; Wed, 2 Aug 2000 15:42:40 -0700 (PDT) mail_from (kevink@mips.com) Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id PAA06846 for ; Wed, 2 Aug 2000 15:42:39 -0700 (PDT) mail_from (kevink@mips.com) Received: from newman.mips.com (ns-dmz [206.31.31.225]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id PAA05710; Wed, 2 Aug 2000 15:41:27 -0700 (PDT) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id PAA06909; Wed, 2 Aug 2000 15:41:27 -0700 (PDT) Message-ID: <027f01bffcd3$3279b800$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" Cc: , , Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS Date: Thu, 3 Aug 2000 00:44:17 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >> It's possible to write code that is compatible with an R4000 but >> not MIPS32, and vice versa, but they are 99% identical. > >Is that possible you can list the 1% difference here? > >I have always been confused by MIPS32/MIPS64 vs R3000/R4000/etc. (And >on top of it, there is also MIPS I, II, III, IV, etc...). I am sure I >am not the only one. MIPS I, II, III, IV, and V are ISAs, instruction-set architectures. R3000, R4000, R5000, R6000, R7000, R8000 et. al. are microprocessor designs that conform (more-or-less) to one of those ISAs. The ISAs were defined in such a way as to be strict supersets of one another. Any MIPS processor can run MIPS I code. Any MIPS IV processor can run MIPS I, II, III, and IV code, etc. To oversimplify slightly: MIPS I - basic 32-bit RISC ISA MIPS II - add branch-likely and Test instructions MIPS III - add 64-bit address and 64-bit data support MIPS IV - add FP MAC, Prefetch MIPS V - add "paired single" SIMD FP instructions As defined by MIPS in the beginning, the ISA - i.e. MIPS I, MIPS II, etc. - described the machine as seen from the standpoint of a user-mode application program. The CP0 instructions and registers weren't considered a part of it. This gave chip designers a lot of freedom and OS writers a lot of headaches. The R8000, for example, was the first MIPS IV CPU, and is 100% (well, maybe 99.99%) compatible with the MIPS IV R10000 at the user binary level. But while the R10000 has a CP0 organization that is a straightforward extrapolation of the R4000 - they wanted it to run NT, after all - the R8000 is just bizzare. Another problem with the way things had been done in the MIPS I/II/III days was that, due to the strict supersetting rules, any new feature had to ride on the back of all the other cool new features that came before it. As a specific example, PREFetch is a MIPS IV instruction. But MIPS IV implies MIPS III, and MIPS III implies a 64-bit CPU. So a 32-bit CPU supporting prefetch, which is a fairly obviously useful thing, does not fit neatly into the model. So... When MIPS Technologies spun back out of SGI, one of the first things that was done was to set about defining standard architectures for 32 and 64-bit CPUs that solved these problems. These new standard architectures are "MIPS32" and "MIPS64". These architectures include both the ISA and the privileged resource architecture, or PRA, so that CP0 is finally standardised - with some amount of permitted subsetting and implementation-specific details allowed, just the same. The MIPS32 ISA includes features from MIPS I, II, III, IV, and V, as well as some stuff like integer MADD, MSUB, CLZ, and CLO that had never made it into the standard user mode ISA. But MIPS32 has no 64-bit operations. MIPS64 is the full-blown 64-bit MIPS I-V+ ISA plus a PRA that is a strict superset of the MIPS32 PRA. So, to get back to Linux, a MIPS32 part can *almost* run the standard MIPS R4K kernel. Almost. What had to be fixed was essentially: - ensuring that TLB initialization and invalidation never write identical (even though invalid) entries to the TLB. MIPS32 parts are allowed to complain about that, and some of them do. - ensuring that no 64-bit instructions are ever used. This necessitated my rewriting the semaphore support code. - eliminating certain assumptions about the relationship between cache size, line size, and associativity. Note that none of this stuff is incompatible with an R4xxx or an R5xxx, its just a matter of being a little more generic. And of course the flip side is that we don't use prefetch, MADD, or CLZ in the kernel either, because the MIPS III-IV parts can't handle them (well, OK, some of them can). Hope this helps, Keivn K. From owner-linux-mips@oss.sgi.com Wed Aug 2 16:13:04 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 16:12:53 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:2635 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 16:12:30 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id QAA00891 for ; Wed, 2 Aug 2000 16:04:25 -0700 (PDT) mail_from (jsun@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA93251 for ; Wed, 2 Aug 2000 16:11:34 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA04382 for ; Wed, 2 Aug 2000 16:11:07 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id QAA30268; Wed, 2 Aug 2000 16:10:43 -0700 Message-ID: <3988AA72.5C342E1D@mvista.com> Date: Wed, 02 Aug 2000 16:10:43 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: "Kevin D. Kissell" CC: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr, ralf@oss.sgi.com Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS References: <027f01bffcd3$3279b800$0deca8c0@Ulysses> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing That certainly helps a lot. Thanks, Kevin. "Kevin D. Kissell" wrote: ... > > So, to get back to Linux, a MIPS32 part can *almost* > run the standard MIPS R4K kernel. Almost. What had Still one more question. If I understand correctly, the 4Km and 4Kp are MIPS32 CPUs. However, they don't have TLBs. Right? Without TLBs, I don't suppose Linux will run ... Jun From owner-linux-mips@oss.sgi.com Wed Aug 2 16:35:33 2000 Received: by oss.sgi.com id ; Wed, 2 Aug 2000 16:35:24 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:12370 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 2 Aug 2000 16:35:06 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id QAA03693 for ; Wed, 2 Aug 2000 16:27:01 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id QAA89506 for ; Wed, 2 Aug 2000 16:34:03 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA99875 for ; Wed, 2 Aug 2000 16:32:30 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from u-100.karlsruhe.ipdial.viaginterkom.de (u-100.karlsruhe.ipdial.viaginterkom.de [62.180.19.100]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA08996 for ; Wed, 2 Aug 2000 16:32:25 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 3 Aug 2000 01:31:55 +0200 Date: Thu, 3 Aug 2000 01:31:55 +0200 From: Ralf Baechle To: Jun Sun Cc: "Kevin D. Kissell" , linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr Subject: Re: PROPOSAL : multi-way cache support in Linux/MIPS Message-ID: <20000803013155.A2097@bacchus.dhis.org> References: <027f01bffcd3$3279b800$0deca8c0@Ulysses> <3988AA72.5C342E1D@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3988AA72.5C342E1D@mvista.com>; from jsun@mvista.com on Wed, Aug 02, 2000 at 04:10:43PM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Aug 02, 2000 at 04:10:43PM -0700, Jun Sun wrote: > > So, to get back to Linux, a MIPS32 part can *almost* > > run the standard MIPS R4K kernel. Almost. What had > > Still one more question. If I understand correctly, the 4Km and 4Kp are > MIPS32 CPUs. However, they don't have TLBs. Right? Without TLBs, I > don't suppose Linux will run ... There is ``Microcontroller Linux'' aka uclinux available at www.uclinux.org. It could be ported to TLB-less processors. You'd loose some of the important functionality of the standard Linux, including some source compatibility. Ralf From owner-linux-mips@oss.sgi.com Thu Aug 3 08:26:48 2000 Received: by oss.sgi.com id ; Thu, 3 Aug 2000 08:26:38 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:51290 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 3 Aug 2000 08:26:07 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id IAA11056 for ; Thu, 3 Aug 2000 08:17:59 -0700 (PDT) mail_from (rblander@math.uwaterloo.ca) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id IAA13376 for ; Thu, 3 Aug 2000 08:25:01 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA06305 for ; Thu, 3 Aug 2000 08:23:22 -0700 (PDT) mail_from (rblander@math.uwaterloo.ca) Received: from math.uwaterloo.ca (math.uwaterloo.ca [129.97.140.144]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id IAA00384 for ; Thu, 3 Aug 2000 08:23:21 -0700 (PDT) mail_from (rblander@math.uwaterloo.ca) Received: (from rblander@localhost) by math.uwaterloo.ca (8.8.8/8.8.8) id LAA32197; Thu, 3 Aug 2000 11:21:59 -0400 (EDT) Date: Thu, 3 Aug 2000 11:21:59 -0400 (EDT) From: "Robyn Landers [MFCF]" Message-Id: <200008031521.LAA32197@math.uwaterloo.ca> To: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: Origin 2000 help Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi folks, I hear from Ralf B. that somebody out there has got Linux working on the Origin 2000 platform. Please contact me about it. Thanks. -- Robyn Landers rblanders@math.uwaterloo.ca (519) 888-4567 x2030 ( [ihnp4|decvax|allegra|utzoo]!watmath!rblanders rblanders@watmath.UUCP :-) Math Faculty Computing Facility, University of Waterloo, Ontario, Canada From owner-linux-mips@oss.sgi.com Thu Aug 3 08:36:58 2000 Received: by oss.sgi.com id ; Thu, 3 Aug 2000 08:36:50 -0700 Received: from jester.ti.com ([192.94.94.1]:48085 "EHLO jester.ti.com") by oss.sgi.com with ESMTP id ; Thu, 3 Aug 2000 08:36:19 -0700 Received: from dlep7.itg.ti.com ([157.170.134.103]) by jester.ti.com (8.10.1/8.10.1) with ESMTP id e73FYhX12723 for ; Thu, 3 Aug 2000 10:34:43 -0500 (CDT) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA16079 for ; Thu, 3 Aug 2000 10:35:35 -0500 (CDT) Received: from dlep3.itg.ti.com (dlep3.itg.ti.com [157.170.188.62]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA16072 for ; Thu, 3 Aug 2000 10:35:35 -0500 (CDT) Received: from ti.com (IDENT:bbrown@bbrown.sc.ti.com [158.218.100.168]) by dlep3.itg.ti.com (8.9.3/8.9.3) with ESMTP id KAA05522 for ; Thu, 3 Aug 2000 10:35:41 -0500 (CDT) Message-ID: <39899191.DE5F555D@ti.com> Date: Thu, 03 Aug 2000 09:36:49 -0600 From: Brady Brown Organization: Texas Instruments X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: SGI news group Subject: GLIBC version? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I am updating from a 2.2.12 kernel to 2.4 on a MIPS32 little endian architecture and have been trying to natively compile some new binaries with no luck. It appears that my problem is an outdated glibc (2.0.7-20). What glibc and glibc-devel versions are recommended for 2.4 and where do I find them? -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Brady Brown (bbrown@ti.com) Work:(801)619-6103 Texas Instruments: Broadband Access Group ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Thu Aug 3 12:43:29 2000 Received: by oss.sgi.com id ; Thu, 3 Aug 2000 12:43:20 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:37425 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 3 Aug 2000 12:42:59 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id MAA20503 for ; Thu, 3 Aug 2000 12:34:48 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id MAA89295 for ; Thu, 3 Aug 2000 12:41:50 -0700 (PDT) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA86267; Thu, 3 Aug 2000 12:40:17 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: by calypso.engr.sgi.com (Postfix, from userid 37984) id 9A4D4A7875; Thu, 3 Aug 2000 12:38:43 -0700 (PDT) To: "Robyn Landers [MFCF]" Cc: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: Re: Origin 2000 help References: <200008031521.LAA32197@math.uwaterloo.ca> From: Ulf Carlsson Date: 03 Aug 2000 12:38:43 -0700 In-Reply-To: "Robyn Landers [MFCF]"'s message of "Thu, 3 Aug 2000 11:21:59 -0400 (EDT)" Message-ID: <6ovittiuocc.fsf@calypso.engr.sgi.com> Lines: 18 X-Mailer: Gnus v5.7/Emacs 20.5 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Robyn, > I hear from Ralf B. that somebody out there has got > Linux working on the Origin 2000 platform. You can read about it at: http://oss.sgi.com/projects/LinuxScalability/ I don't think anyone has written any complete instructions for getting it running. You could use a normal 32-bit Indy filesystem with a MIPS64 kernel compiled from the Linux/MIPS CVS tree at oss.sgi.com. The tools we use are located at: ftp://oss.sgi.com/pub/linux/mips/crossdev/i386-linux/mips64-linux/ Ulf From owner-linux-mips@oss.sgi.com Sat Aug 5 02:10:17 2000 Received: by oss.sgi.com id ; Sat, 5 Aug 2000 02:10:07 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:29447 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 5 Aug 2000 02:09:53 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id CAA00706; Sat, 5 Aug 2000 02:15:19 -0700 (PDT) mail_from (ezsooco7jle@aol.com) From: ezsooco7jle@aol.com Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA59175; Sat, 5 Aug 2000 02:09:05 -0700 (PDT) mail_from (ezsooco7jle@aol.com) Received: from sv1.nl-zeus.or.jp (sv1.nl-zeus.or.jp [210.196.253.66]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id CAA05733; Sat, 5 Aug 2000 02:09:04 -0700 (PDT) mail_from (ezsooco7jle@aol.com) Received: from 8848.net (sdn-ar-002flspetP222.dialsprint.net [168.191.80.238]) by sv1.nl-zeus.or.jp (SMI-8.6/3.4W2) with SMTP id SAA21060; Sat, 5 Aug 2000 18:13:59 +0900 Message-ID: <000033993769$00003745$00007107@mail.www.yu> To: Subject: Looking For A Great Home Based Business? Date: Sat, 05 Aug 2000 04:41:09 -0400 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Mircosoft Outlook Express 5.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Tired of the 40 X 40 X 40 Plan? You know: Work 40 hours per week for someone else for 40 years, then receive a 40% reduction in pay! Is working for a "boss" too demeaning and unrewarding? Are you sick of depending on a job with too little pay and too many hours with no personal reward and even less future? If you're determined to retire in the next 2 - 5 years with enough income to have REAL Financial Independence and Freedom, and are not afraid to work for it, I can help you. I am looking for people with a Good Work Ethic and extraordinary Desire to Earn at Least $10,000 per Month Working From Home! NO SPECIAL SKILLS OR EXPERIENCE REQUIRED. We will give you all the training and personal support you will need to ensure your success! This LEGITIMATE HOME-BASED INCOME OPPORTUNITY can put you back in Control of your Time, Your Finances, and Your Life! If you've tried other opportunities in the past that have failed to live up to their promises, THIS IS DIFFERENT THAN ANYTHING ELSE YOU'VE SEEN! THIS IS NOT A GET-RICH-QUICK SCHEME! YOUR FINANCIAL PAST DOES NOT HAVE TO BE YOUR FINANCIAL FUTURE! CALL ONLY IF YOU ARE SERIOUS! 1-800-457-0481 (Free, 24 hour, 2 minute recorded message) DON'T GO TO SLEEP WITHOUT LISTENING TO THIS! "All our dreams can come true - if we have the courage to pursue them" - Walt Disney To be removed from future mailings, send an email to: nope_02@yahoo.com and type "Remove" in the subject line. Tired of the 40 X 40 X 40 Plan? You know: Work 40 hours per week for someone else for 40 years, then receive a 40% reduction in pay! Is working for a "boss" too demeaning and unrewarding? Are you sick of depending on a job with too little pay and too many hours with no personal reward and even less future? From owner-linux-mips@oss.sgi.com Sat Aug 5 16:15:04 2000 Received: by oss.sgi.com id ; Sat, 5 Aug 2000 16:14:54 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:23823 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 5 Aug 2000 16:14:20 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id QAA09427 for ; Sat, 5 Aug 2000 16:06:16 -0700 (PDT) mail_from (philloc@janus.lsd.ornl.gov) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA81498 for ; Sat, 5 Aug 2000 16:13:32 -0700 (PDT) mail_from (philloc@janus.lsd.ornl.gov) Received: from janus.lsd.ornl.gov (janus.lsd.ornl.gov [160.91.102.96]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA05973 for ; Sat, 5 Aug 2000 16:13:15 -0700 (PDT) mail_from (philloc@janus.lsd.ornl.gov) Received: from localhost (philloc@localhost) by janus.lsd.ornl.gov (8.9.3/8.9.3) with ESMTP id TAA00954; Sat, 5 Aug 2000 19:13:15 -0400 Date: Sat, 5 Aug 2000 19:13:15 -0400 (EDT) From: phil Reply-To: i15@ornl.gov To: linux-fbdev@vuser.vu.union.edu cc: linux@cthulhu.engr.sgi.com Subject: SGI VW 540, fbdev and pot pourii of faults and evidence..:-) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Folks, I have presented below a small list of "features" with the SGI kernel driver for fbdev (no particular order) , and would like to know if any of the symptoms, indicate general frame buffer problems, or specific hardware implementation issues. I would also like to ask, if SGI is likely to make the hardware specs OSS (for cobalt etc.), so that those with the skill (this is not my forte, but I will try...), can stabilise this otherwise competent port. 1. After boot , no matter what video mode one is in, the text console is zippy. After using X (or changing modes using fbset) the text scrolling is *painfully* slow. There is no apparent difference in the kernel mechanism when switching, so is it just the boot state that works? 2.In X(4.01) all video modes (800x600,1024x768,1280x1024,1600x1200) work in 8 bit and 16 bit colour. In Depth 24 (-fbbpp 32) , 1280x1024 is stable, but tinted green. In Depth 24 (-fbbpp 32) , 1600x1200 is "shivering, left-right", and tinted green. Empirical observations (i.e. writing known patterns to the /dev/fb0 device) indicate that SGI reverse RGB for 888 format, compared to RGB565. That is red offset=0, green=8,blue=16 rather than red=24 etc.. I have reversed the assignment in the "var" structure (in sgivwfb_set_var ) and in setcolreg the offsets are used, but to no effect. What else needs changing? Kind Regards PHiL From owner-linux-mips@oss.sgi.com Sun Aug 6 08:13:50 2000 Received: by oss.sgi.com id ; Sun, 6 Aug 2000 08:13:39 -0700 Received: from [204.94.214.10] ([204.94.214.10]:8272 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 6 Aug 2000 08:13:11 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA14152 for ; Sun, 6 Aug 2000 07:41:07 -0700 (PDT) mail_from (flo@rfc822.org) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA56089 for ; Sun, 6 Aug 2000 07:48:15 -0700 (PDT) mail_from (flo@rfc822.org) Received: from noose.gt.owl.de (noose.gt.owl.de [62.52.19.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA04331 for ; Sun, 6 Aug 2000 07:48:13 -0700 (PDT) mail_from (flo@rfc822.org) Received: by noose.gt.owl.de (Postfix, from userid 10) id 64ADF7F4; Sun, 6 Aug 2000 16:50:13 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 0C4D58FF5; Fri, 4 Aug 2000 20:56:08 +0200 (CEST) Date: Fri, 4 Aug 2000 20:56:08 +0200 From: Florian Lohoff To: Geert Uytterhoeven Cc: =?iso-8859-1?Q?=B1=E8=C7=D1=BC=BA?= , linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr Subject: Re: IGS5050 Driver Message-ID: <20000804205608.A313@paradigm.rfc822.org> References: <000001bff6fe$34021120$8d19ebcb@khs> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.0.1i In-Reply-To: ; from geert@linux-m68k.org on Thu, Jul 27, 2000 at 02:26:02PM +0200 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jul 27, 2000 at 02:26:02PM +0200, Geert Uytterhoeven wrote: > On Wed, 26 Jul 2000, [ks_c_5601-1987] ±èÇÑ?º wrote: > > I want to know that there is a IGS5050 Grpahic chip driver for linux-mips. > > If yes, where is the driver files? > > linux/drivers/video/cyber2000fb.c is a driver for the IGS CyberPro 2000, 2010 > and 5000 in the NetWinder, which has an ARM CPU. If the 5050 is sufficient > compatible with the 5000 it should not be too difficult to get cyber2000fb to > work on the 5050 on the MIPS. When back from Canada i will start working on that beast - I have 100 SetTopBoxes with the 5000/5050 Combination (Video and Audio Controller). (These are x86 based) The IGS People seem to be quiet helpful - I mailed them concerning Documentation and got a LARGE pdf back for this Chip. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Sun Aug 6 08:14:09 2000 Received: by oss.sgi.com id ; Sun, 6 Aug 2000 08:13:50 -0700 Received: from tomts2.bellnexxia.net ([209.226.175.140]:60907 "EHLO tomts2-srv.bellnexxia.net") by oss.sgi.com with ESMTP id ; Sun, 6 Aug 2000 08:13:17 -0700 Received: from free.fr ([216.208.215.83]) by tomts2-srv.bellnexxia.net (InterMail vM.4.01.03.00 201-229-121) with ESMTP id <20000806150248.JMRO8045.tomts2-srv.bellnexxia.net@free.fr>; Sun, 6 Aug 2000 11:02:48 -0400 Message-ID: <398D7E42.88D4005E@free.fr> Date: Sun, 06 Aug 2000 15:03:30 +0000 From: Famille Chauvat X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.9-27mdk i686) X-Accept-Language: fr-FR, en MIME-Version: 1.0 To: Florian Lohoff CC: linux-mips@oss.sgi.com Subject: Re: [Install trouble] References: <39847F16.543AA232@free.fr> <20000804210304.C313@paradigm.rfc822.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Florian, Thanks for your response. Humm, I don't know how to boot with rw support... And, Keith M Wesolowski, see messages in this thread, modify the kernel to have a ramdisk support. >>>> Keith M Wesolowski >>>> I've uploaded a new kernel, dated 0731, which should have the necessary support. >>>> That what I don't understand, except a lot of another things :-), is how it runs. You know, I took a lot of things on internet, I read a lot of papers, perhaps not those I had to, and I've never ask to support or not the ramdisk. So my question is, how the kernel I took doesn't support something I never asked for. I'm not sure to be very clear :-) With the new kernel I have, I've a new trouble. After the partition step, a message "mount failed, bad address" appears and I 've to reboot. Of course, the next time I'ld the same things. Any suggestion, any help, would be very appreciate. Btw, if you know someone of your team or friends who speak french, it could be better, for me, to explain what going wrong. Philippe From owner-linux-mips@oss.sgi.com Sun Aug 6 08:14:49 2000 Received: by oss.sgi.com id ; Sun, 6 Aug 2000 08:14:40 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:36620 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 6 Aug 2000 08:14:23 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 86F1A7F5; Sun, 6 Aug 2000 16:50:13 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 590408FF5; Fri, 4 Aug 2000 20:58:16 +0200 (CEST) Date: Fri, 4 Aug 2000 20:58:16 +0200 From: Florian Lohoff To: Keith M Wesolowski Cc: linux-mips@oss.sgi.com Subject: Re: sgi prom console Message-ID: <20000804205816.B313@paradigm.rfc822.org> References: <20000726215416.A18398@foobazco.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <20000726215416.A18398@foobazco.org>; from wesolows@foobazco.org on Wed, Jul 26, 2000 at 09:54:16PM -0700 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Jul 26, 2000 at 09:54:16PM -0700, Keith M Wesolowski wrote: > > This patch gets the sgi prom console outputting again, and eliminates > the "cannot open initial console" error. Unfortunately, all output > from userland goes to the serial port, not the the prom console. > Looking at the code, this isn't at all surprising; the prom console > pretends to be 4,64, ttyS0. It's quite beyond me how the prom console > could ever have worked for userland. It never has :) - There is a major difference between the console for the Kernel (Really called console in the kernel) and a TTY. The TTY implementation for the Prom Console has never been done from what i see in the code - Although this would be quiet helpful to do a full implementation for a TTY as we than had the possibility to boot the Indigo2 etc with Framebuffer/Keyboard. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Sun Aug 6 08:15:09 2000 Received: by oss.sgi.com id ; Sun, 6 Aug 2000 08:14:50 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:36876 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 6 Aug 2000 08:14:23 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id ACC5E7F6; Sun, 6 Aug 2000 16:50:13 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 049028FF5; Fri, 4 Aug 2000 21:03:04 +0200 (CEST) Date: Fri, 4 Aug 2000 21:03:04 +0200 From: Florian Lohoff To: Famille Chauvat Cc: linux-mips@oss.sgi.com Subject: Re: [Install trouble] Message-ID: <20000804210304.C313@paradigm.rfc822.org> References: <39847F16.543AA232@free.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <39847F16.543AA232@free.fr>; from famille.chauvat@free.fr on Sun, Jul 30, 2000 at 07:16:38PM +0000 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Jul 30, 2000 at 07:16:38PM +0000, Famille Chauvat wrote: > Hello, > > I'm working with an Indy station and the corresponding kernel. > On the bootp() step, i got a message: > >>>>>>> > > creating 100k of ramdisk space... done > mounting /tmp from ramdisk... failed > > I can't recover from this. > <<<<<<< Probably this is a kernel with no ramdisk support ? Ah wait - No - You have booted the kernel with a read-only root - Which means - When mounting /tmp i tries to write /etc/mtab which is read-only - Try to append "rw" to your prom console boot line Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Mon Aug 7 05:27:28 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 05:27:18 -0700 Received: from jarre.otscorp.com ([203.44.145.48]:43785 "EHLO shorts.cx") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 05:26:46 -0700 Received: from jarre.house (ndf@jarre.house [192.168.10.1]) by shorts.cx (8.11.0/8.11.0) with ESMTP id e77CShG09064 for ; Mon, 7 Aug 2000 22:28:43 +1000 Date: Mon, 7 Aug 2000 22:27:03 +1000 (EST) From: Nathan Fraser X-Sender: ndf@jarre.house To: linux-mips@oss.sgi.com Subject: Re: [Install trouble] : mount failed: bad address Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing .... >> creating 100k of ramdisk space... done >> mounting /tmp from ramdisk... failed >> >> I can't recover from this. >> <<<<<<< > Probably this is a kernel with no ramdisk support ? Ah wait - No - > You have booted the kernel with a read-only root - Which means - When > mounting /tmp i tries to write /etc/mtab which is read-only - Try > to append "rw" to your prom console boot line I just tried installing with vmlinux-000804-IP22-4400 and hardhat-sgi-5.1.tar.gz - i get the same error as soon as the drive is formatted and is mounted (ie: mount failed: bad address) my boot command was (minor variations of): boot bootp():/vmlinux root=/dev/nfs rw /home/tftboot/mipseb The root fs is mounted via nfs ok read-write which i verified by writing a file to it.. As far as i can tell the redhat installer is all working ok.. it just can't mount the newly formatted partition (or even an irix formatted efs partition). Is there a 'better' kernel to use to get the base system installed? Or am i making some sort of stoopid installation mistake? The kernel that came in the hardhat tarball failed with: Looking up port of RPC 100003/2 on 192.168.10.30 page fault from irq then locked up toally :( Sometimes it would not even print the 'q'. The nfs is being served from a pc with slackware 7 / linux 2.2.16 / dhcp 2.0 / nfs: Universal NFS Server 2.2beta47. oh yeah.. and setenv netaddr 0 prior to boot... was a big help :) I was trying to install to the second hard drive: /dev/sdb1 (under linux). my hinv: Iris Audio Processor: version A2 revision 4.1.0 1 200 MHZ IP22 Processor FPU: MIPS R4010 Floating Point Chip Revision: 0.0 CPU: MIPS R4400 Processor Chip Revision: 6.0 On-board serial ports: 2 On-board bi-directional parallel port Data cache size: 16 Kbytes Instruction cache size: 16 Kbytes Secondary unified instruction/data cache size: 1 Mbyte Main memory size: 128 Mbytes Integral ISDN: Basic Rate Interface unit 0, revision 1.0 Integral Ethernet: ec0, version 1 Integral SCSI controller 0: Version WD33C93B, revision D Disk drive: unit 2 on SCSI controller 0 Disk drive: unit 1 on SCSI controller 0 Graphics board: Indy 24-bit Vino video: unit 0, revision 0, IndyCam connected Any pointers would be greatly appreciated! From owner-linux-mips@oss.sgi.com Mon Aug 7 08:28:51 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 08:28:41 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:19128 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 08:28:14 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id RAA04367; Mon, 7 Aug 2000 17:22:54 +0200 (MET DST) Date: Mon, 7 Aug 2000 17:22:54 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Ralf Baechle , Harald Koerfgen cc: Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: High resolution timer support for I/O ASIC DECstations Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, Following is a patch that implements a high resolution timer for I/O ASIC DECstations, i.e. it provides a do_fast_gettimeoffset() function that is suitable for R3K-based machines (that do not have a cycle counter within the CPU). Also a proper do_div() macro is included. There are also a few small cleanups and enhancements in the related code. This change makes my NTP daemon particularly happy -- a dispersion of 0.02 when synchronizing with a remote server is really nice. An X server would benefit, too, if we had one. I'd like to encourage everyone interested to test these changes as much as possible. Also if anyone knows of a better division algorithm than the one I used for do_div64_32(), I'd be glad to hear of it. If nothing wrong pops up, these changes should be included in the official tree, I believe. Comments are welcomed, as usually. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/Makefile linux-mips-2.4.0-test5-20000731/arch/mips/Makefile --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/Makefile Thu Jul 13 04:26:16 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/Makefile Sat Aug 5 17:45:33 2000 @@ -35,7 +35,7 @@ # machines may also. Since BFD is incredibly buggy with respect to # crossformat linking we rely on the elf2ecoff tool for format conversion. # -CFLAGS += -G 0 -mno-abicalls -fno-pic +GCCFLAGS := -G 0 -mno-abicalls -fno-pic LINKFLAGS += -static -G 0 MODFLAGS += -mlong-calls @@ -47,31 +47,40 @@ # CPU-dependent compiler/assembler options for optimization. # ifdef CONFIG_CPU_R3000 -CFLAGS := $(CFLAGS) -mcpu=r3000 -mips1 +GCCFLAGS += -mcpu=r3000 -mips1 endif ifdef CONFIG_CPU_R6000 -CFLAGS := $(CFLAGS) -mcpu=r6000 -mips2 -Wa,--trap +GCCFLAGS += -mcpu=r6000 -mips2 -Wa,--trap endif ifdef CONFIG_CPU_R4300 -CFLAGS := $(CFLAGS) -mcpu=r4300 -mips2 -Wa,--trap +GCCFLAGS += -mcpu=r4300 -mips2 -Wa,--trap endif ifdef CONFIG_CPU_R4X00 -CFLAGS := $(CFLAGS) -mcpu=r4600 -mips2 -Wa,--trap +GCCFLAGS += -mcpu=r4600 -mips2 -Wa,--trap endif ifdef CONFIG_CPU_R5000 -CFLAGS := $(CFLAGS) -mcpu=r8000 -mips2 -Wa,--trap +GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap endif ifdef CONFIG_CPU_NEVADA -CFLAGS := $(CFLAGS) -mcpu=r8000 -mips2 -Wa,--trap -mmad +GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap -mmad endif ifdef CONFIG_CPU_R8000 -CFLAGS := $(CFLAGS) -mcpu=r8000 -mips2 -Wa,--trap +GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap endif ifdef CONFIG_CPU_R10000 -CFLAGS := $(CFLAGS) -mcpu=r8000 -mips2 -Wa,--trap +GCCFLAGS += -mcpu=r8000 -mips2 -Wa,--trap endif # +# The pipe options is bad for my low-mem machine +# Uncomment this if you want this. +# +GCCFLAGS += -pipe + +CFLAGS += $(GCCFLAGS) +AFLAGS += $(GCCFLAGS) + +# # Board-dependent options and extra files # ifdef CONFIG_ALGOR_P4032 @@ -168,12 +177,6 @@ ifdef LOADADDR LINKFLAGS += -Ttext $(word 1,$(LOADADDR)) endif - -# -# The pipe options is bad for my low-mem machine -# Uncomment this if you want this. -# -CFLAGS += -pipe HEAD := arch/mips/kernel/head.o arch/mips/kernel/init_task.o diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/Makefile linux-mips-2.4.0-test5-20000731/arch/mips/dec/Makefile --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/Makefile Tue Mar 28 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/Makefile Sat Aug 5 17:24:35 2000 @@ -7,9 +7,9 @@ # .S.s: - $(CPP) $(CFLAGS) $< -o $*.s + $(CPP) $(AFLAGS) -traditional -o $*.o $< .S.o: - $(CC) $(CFLAGS) -c $< -o $*.o + $(CC) $(AFLAGS) -traditional -c -o $*.o $< all: dec.o O_TARGET := dec.o diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/int-handler.S linux-mips-2.4.0-test5-20000731/arch/mips/dec/int-handler.S --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/int-handler.S Tue Mar 28 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/int-handler.S Sat Aug 5 15:31:37 2000 @@ -2,6 +2,7 @@ * arch/mips/dec/int-handler.S * * Copyright (C) 1995, 1996, 1997 Paul M. Antoine and Harald Koerfgen + * Copyright (C) 2000 Maciej W. Rozycki * * Written by Ralf Baechle and Andreas Busse, modified for DECStation * support by Paul Antoine and Harald Koerfgen. @@ -16,6 +17,11 @@ #include #include +#include +#include +#include +#include +#include #include @@ -164,10 +170,10 @@ /* * Handle "IRQ Controller" Interrupts * Masked Interrupts are still visible and have to be masked "by hand". - * %hi(KN02_CSR_ADDR) does not work so all addresses are hardcoded :-(. */ EXPORT(kn02_io_int) -kn02_io_int: lui t0,0xbff0 # get interrupt status and mask +kn02_io_int: # 3max + lui t0,KN02_CSR_ADDR>>16 # get interrupt status and mask lw t0,(t0) la t1,asic_mask_tbl move t3,t0 @@ -176,17 +182,20 @@ and t0,t3 # mask out allowed ones EXPORT(kn03_io_int) -kn03_io_int: lui t2,0xbf84 # upper part of IOASIC Address - lw t0,0x0110(t2) # get status: IOASIC isr - lw t3,0x0120(t2) # get mask: IOASIC isrm +kn03_io_int: # 3max+ + lui t2,KN03_IOASIC_BASE>>16 # upper part of IOASIC Address + lw t0,SIR(t2) # get status: IOASIC isr + lw t3,SIMR(t2) # get mask: IOASIC isrm la t1,asic_mask_tbl b find_int and t0,t3 # mask out allowed ones - EXPORT(kn02ba_io_int) -kn02ba_io_int: lui t2,0xbc04 - lw t0,0x0110(t2) # IOASIC isr, works for maxine also - lw t3,0x0120(t2) # IOASIC isrm + EXPORT(kn02xa_io_int) +kn02xa_io_int: # 3min/maxine + lui t2,KN02XA_IOASIC_BASE>>16 + # upper part of IOASIC Address + lw t0,SIR(t2) # get status: IOASIC isr + lw t3,SIMR(t2) # get mask: IOASIC isrm la t1,asic_mask_tbl and t0,t3 diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/irq.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/irq.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/irq.c Tue Mar 28 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/irq.c Sat Aug 5 18:40:27 2000 @@ -27,10 +27,6 @@ #include -extern volatile unsigned int *isr; /* address of the interrupt status register */ -extern volatile unsigned int *imr; /* address of the interrupt mask register */ -extern decint_t dec_interrupt[NR_INTS]; - irq_cpustat_t irq_stat [NR_CPUS]; unsigned int local_bh_count[NR_CPUS]; diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/setup.c Tue Mar 28 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/setup.c Sat Aug 5 18:49:00 2000 @@ -6,6 +6,7 @@ * for more details. * * Copyright (C) 1998 Harald Koerfgen + * Copyright (C) 2000 Maciej W. Rozycki */ #include #include @@ -22,6 +23,8 @@ #include #include #include +#include +#include #include extern asmlinkage void decstation_handle_int(void); @@ -33,14 +36,14 @@ void dec_init_kn02ca(void); void dec_init_kn03(void); -char *dec_rtc_base = (char *) KN01_RTC_BASE; /* Assume DS2100/3100 initially */ +char *dec_rtc_base = (void *) KN01_RTC_BASE; /* Assume DS2100/3100 initially */ + +volatile unsigned int *ioasic_base; decint_t dec_interrupt[NR_INTS]; -/* +/* * Information regarding the IRQ Controller - * - * isr and imr are also hardcoded for different machines in int_handler.S */ volatile unsigned int *isr = 0L; /* address of the interrupt status register */ @@ -206,8 +209,8 @@ * Setup some memory addresses. FIXME: probably incomplete! */ dec_rtc_base = (char *) KN02_RTC_BASE; - isr = (volatile unsigned int *) KN02_CSR_ADDR; - imr = (volatile unsigned int *) KN02_CSR_ADDR; + isr = (void *) KN02_CSR_ADDR; + imr = (void *) KN02_CSR_ADDR; /* * Setup IOASIC interrupt @@ -275,16 +278,17 @@ /* * Setup some memory addresses. */ + ioasic_base = (void *) KN02XA_IOASIC_BASE; dec_rtc_base = (char *) KN02XA_RTC_BASE; - isr = (volatile unsigned int *) KN02XA_SIR_ADDR; - imr = (volatile unsigned int *) KN02XA_SIRM_ADDR; + isr = (void *) KN02XA_IOASIC_REG(SIR); + imr = (void *) KN02XA_IOASIC_REG(SIMR); /* * Setup IOASIC interrupt */ cpu_mask_tbl[0] = IE_IRQ3; cpu_irq_nr[0] = -1; - cpu_ivec_tbl[0] = kn02ba_io_int; + cpu_ivec_tbl[0] = kn02xa_io_int; *imr = 0; /* @@ -355,14 +359,15 @@ /* * Setup some memory addresses. FIXME: probably incomplete! */ + ioasic_base = (void *) KN02XA_IOASIC_BASE; dec_rtc_base = (char *) KN02XA_RTC_BASE; - isr = (volatile unsigned int *) KN02XA_SIR_ADDR; - imr = (volatile unsigned int *) KN02XA_SIRM_ADDR; + isr = (void *) KN02XA_IOASIC_REG(SIR); + imr = (void *) KN02XA_IOASIC_REG(SIMR); /* * Setup IOASIC interrupt */ - cpu_ivec_tbl[1] = kn02ba_io_int; + cpu_ivec_tbl[1] = kn02xa_io_int; cpu_irq_nr[1] = -1; cpu_mask_tbl[1] = IE_IRQ3; *imr = 0; @@ -430,9 +435,10 @@ /* * Setup some memory addresses. FIXME: probably incomplete! */ + ioasic_base = (void *) KN03_IOASIC_BASE; dec_rtc_base = (char *) KN03_RTC_BASE; - isr = (volatile unsigned int *) KN03_SIR_ADDR; - imr = (volatile unsigned int *) KN03_SIRM_ADDR; + isr = (void *) KN03_IOASIC_REG(SIR); + imr = (void *) KN03_IOASIC_REG(SIMR); /* * Setup IOASIC interrupt diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/time.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/time.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/time.c Wed Jul 12 04:25:56 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/time.c Sat Aug 5 19:19:57 2000 @@ -1,8 +1,9 @@ /* - * linux/arch/mips/kernel/time.c + * linux/arch/mips/dec/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * Copyright (C) 2000 Maciej W. Rozycki * * This file contains the time handling details for PC-style clocks as * found in some MIPS systems. @@ -21,10 +22,15 @@ #include #include #include +#include +#include +#include #include #include +#include + extern volatile unsigned long wall_jiffies; extern rwlock_t xtime_lock; @@ -36,12 +42,22 @@ /* This is for machines which generate the exact clock. */ #define USECS_PER_JIFFY (1000000/HZ) +#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff) /* Cycle counter value at the previous timer interrupt.. */ static unsigned int timerhi = 0, timerlo = 0; /* + * Cached "1/(clocks per usec)*2^32" value. + * It has to be recalculated once each jiffy. + */ +static unsigned long cached_quotient = 0; + +/* Last jiffy when do_fast_gettimeoffset() was called. */ +static unsigned long last_jiffies = 0; + +/* * On MIPS only R4000 and better have a cycle counter. * * FIXME: Does playing with the RP bit in c0_status interfere with this code? @@ -50,45 +66,34 @@ { u32 count; unsigned long res, tmp; - - /* Last jiffy when do_fast_gettimeoffset() was called. */ - static unsigned long last_jiffies = 0; unsigned long quotient; - /* - * Cached "1/(clocks per usec)*2^32" value. - * It has to be recalculated once each jiffy. - */ - static unsigned long cached_quotient = 0; - tmp = jiffies; quotient = cached_quotient; - if (tmp && last_jiffies != tmp) { - last_jiffies = tmp; - __asm__(".set\tnoreorder\n\t" - ".set\tnoat\n\t" - ".set\tmips3\n\t" - "lwu\t%0,%2\n\t" - "dsll32\t$1,%1,0\n\t" - "or\t$1,$1,%0\n\t" - "ddivu\t$0,$1,%3\n\t" - "mflo\t$1\n\t" - "dsll32\t%0,%4,0\n\t" - "nop\n\t" - "ddivu\t$0,%0,$1\n\t" - "mflo\t%0\n\t" - ".set\tmips0\n\t" - ".set\tat\n\t" - ".set\treorder" - :"=&r"(quotient) - :"r"(timerhi), - "m"(timerlo), - "r"(tmp), - "r"(USECS_PER_JIFFY) - :"$1"); + if (last_jiffies != tmp) { + last_jiffies = tmp; + if (last_jiffies != 0) { + unsigned long r0; + __asm__(".set push\n\t" + ".set mips3\n\t" + "lwu %0,%3\n\t" + "dsll32 %1,%2,0\n\t" + "or %1,%1,%0\n\t" + "ddivu $0,%1,%4\n\t" + "mflo %1\n\t" + "dsll32 %0,%5,0\n\t" + "or %0,%0,%6\n\t" + "ddivu $0,%0,%1\n\t" + "mflo %0\n\t" + ".set pop" + : "=&r" (quotient), "=&r" (r0) + : "r" (timerhi), "m" (timerlo), + "r" (tmp), "r" (USECS_PER_JIFFY), + "r" (USECS_PER_JIFFY_FRAC)); cached_quotient = quotient; + } } /* Get last timer tick in absolute kernel time */ count = read_32bit_cp0_register(CP0_COUNT); @@ -97,11 +102,9 @@ count -= timerlo; //printk("count: %08lx, %08lx:%08lx\n", count, timerhi, timerlo); - __asm__("multu\t%1,%2\n\t" - "mfhi\t%0" - :"=r"(res) - :"r"(count), - "r"(quotient)); + __asm__("multu %2,%3" + : "=l" (tmp), "=h" (res) + : "r" (count), "r" (quotient)); /* * Due to possible jiffies inconsistencies, we need to check @@ -113,6 +116,47 @@ return res; } +static unsigned long do_ioasic_gettimeoffset(void) +{ + u32 count; + unsigned long res, tmp; + unsigned long quotient; + + tmp = jiffies; + + quotient = cached_quotient; + + if (last_jiffies != tmp) { + last_jiffies = tmp; + if (last_jiffies != 0) { + unsigned long r0; + do_div64_32(r0, timerhi, timerlo, tmp); + do_div64_32(quotient, USECS_PER_JIFFY, + USECS_PER_JIFFY_FRAC, r0); + cached_quotient = quotient; + } + } + /* Get last timer tick in absolute kernel time */ + count = ioasic_read(FCTR); + + /* .. relative to previous jiffy (32 bits is enough) */ + count -= timerlo; +//printk("count: %08x, %08x:%08x\n", count, timerhi, timerlo); + + __asm__("multu %2,%3" + : "=l" (tmp), "=h" (res) + : "r" (count), "r" (quotient)); + + /* + * Due to possible jiffies inconsistencies, we need to check + * the result so that we'll get a timer that is monotonic. + */ + if (res >= USECS_PER_JIFFY) + res = USECS_PER_JIFFY - 1; + + return res; +} + /* This function must be called with interrupts disabled * It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs * @@ -170,8 +214,8 @@ tv->tv_usec += do_gettimeoffset(); /* - * xtime is atomically updated in timer_bh. lost_ticks is - * nonzero if the timer bottom half hasnt executed yet. + * xtime is atomically updated in timer_bh. jiffies - wall_jiffies + * is nonzero if the timer bottom half hasnt executed yet. */ if (jiffies - wall_jiffies) tv->tv_usec += USECS_PER_JIFFY; @@ -309,11 +353,12 @@ read_lock(&xtime_lock); if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 && xtime.tv_usec > 500000 - (tick >> 1) && - xtime.tv_usec < 500000 + (tick >> 1)) + xtime.tv_usec < 500000 + (tick >> 1)) { if (set_rtc_mmss(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ + } /* As we return to user mode fire off the other CPU schedulers.. this is basically because we don't yet share IRQ's around. This message is rigged to be safe on the 386 - basically it's a hack, so don't look @@ -334,16 +379,42 @@ timerhi += (count < timerlo); /* Wrap around */ timerlo = count; + if (jiffies == ~0) { + /* + * If jiffies is to overflow in this timer_interrupt we must + * update the timer[hi]/[lo] to make do_fast_gettimeoffset() + * quotient calc still valid. -arca + */ + write_32bit_cp0_register(CP0_COUNT, 0); + timerhi = timerlo = 0; + } + timer_interrupt(irq, dev_id, regs); +} + +static void ioasic_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned int count; + + /* + * The free-running counter is 32 bit which is good for about + * 2 minutes, 50 seconds at possible count rates of upto 25MHz. + */ + count = ioasic_read(FCTR); + timerhi += (count < timerlo); /* Wrap around */ + timerlo = count; - if (!jiffies) { + if (jiffies == ~0) { /* - * If jiffies has overflowed in this timer_interrupt we must + * If jiffies is to overflow in this timer_interrupt we must * update the timer[hi]/[lo] to make do_fast_gettimeoffset() * quotient calc still valid. -arca */ + ioasic_write(FCTR, 0); timerhi = timerlo = 0; } + + timer_interrupt(irq, dev_id, regs); } /* Converts Gregorian date to seconds since 1970-01-01 00:00:00. @@ -473,6 +544,10 @@ write_32bit_cp0_register(CP0_COUNT, 0); do_gettimeoffset = do_fast_gettimeoffset; irq0.handler = r4k_timer_interrupt; - } + } else if (IOASIC) { + ioasic_write(FCTR, 0); + do_gettimeoffset = do_ioasic_gettimeoffset; + irq0.handler = ioasic_timer_interrupt; + } board_time_init(&irq0); } diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/addrspace.h linux-mips-2.4.0-test5-20000731/include/asm-mips/addrspace.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/addrspace.h Tue Mar 28 04:27:19 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/addrspace.h Sat Aug 5 18:04:53 2000 @@ -4,6 +4,7 @@ * for more details. * * Copyright (C) 1996 by Ralf Baechle + * Copyright (C) 2000 by Maciej W. Rozycki * * Defitions for the address spaces of the MIPS CPUs. */ @@ -22,20 +23,35 @@ /* * Returns the kernel segment base of a given address */ +#ifndef __ASSEMBLY__ #define KSEGX(a) (((unsigned long)(a)) & 0xe0000000) +#else +#define KSEGX(a) ((a) & 0xe0000000) +#endif /* * Returns the physical address of a KSEG0/KSEG1 address */ +#ifndef __ASSEMBLY__ #define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) +#else +#define PHYSADDR(a) ((a) & 0x1fffffff) +#endif /* * Map an address to a certain kernel segment */ +#ifndef __ASSEMBLY__ #define KSEG0ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0)) #define KSEG1ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1)) #define KSEG2ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2)) #define KSEG3ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3)) +#else +#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0) +#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1) +#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2) +#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3) +#endif /* * Memory segments (64bit kernel mode addresses) diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/interrupts.h linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/interrupts.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/interrupts.h Tue Mar 28 04:27:23 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/interrupts.h Sat Aug 5 19:25:54 2000 @@ -36,7 +36,7 @@ #define NR_INTS 11 -#ifndef _LANGUAGE_ASSEMBLY +#ifndef __ASSEMBLY__ /* * Data structure to hide the differences between the DECstation Interrupts * @@ -50,6 +50,12 @@ unsigned int iemask; /* enabling interrupts in IRQ Controller */ } decint_t; +extern volatile unsigned int *isr; + /* address of the interrupt status register */ +extern volatile unsigned int *imr; + /* address of the interrupt mask register */ +extern decint_t dec_interrupt[NR_INTS]; + /* * Interrupt table structure to hide differences between different * systems such. @@ -68,7 +74,7 @@ extern void dec_intr_rtc(void); extern void kn02_io_int(void); -extern void kn02ba_io_int(void); +extern void kn02xa_io_int(void); extern void kn03_io_int(void); extern void intr_halt(void); diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/ioasic.h linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/ioasic.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/ioasic.h Thu Jan 1 00:00:00 1970 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/ioasic.h Sat Aug 5 17:07:15 2000 @@ -0,0 +1,24 @@ +/* + * linux/asm-mips/dec/ioasic.h + * + * Copyright (C) 2000 Maciej W. Rozycki + * + * DEC I/O ASIC access operations. + */ + +#ifndef __ASM_DEC_IOASIC_H +#define __ASM_DEC_IOASIC_H + +extern volatile unsigned int *ioasic_base; + +extern inline void ioasic_write(unsigned int reg, unsigned int v) +{ + ioasic_base[reg / 4] = v; +} + +extern inline unsigned int ioasic_read(unsigned int reg) +{ + return ioasic_base[reg / 4]; +} + +#endif /* __ASM_DEC_IOASIC_H */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/ioasic_addrs.h linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/ioasic_addrs.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/ioasic_addrs.h Tue Mar 28 04:27:23 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/ioasic_addrs.h Sat Aug 5 14:48:14 2000 @@ -17,25 +17,25 @@ #define CHUNK_SIZE 0x00040000 -#define SYSTEM_ROM 00*CHUNK_SIZE /* ??? */ -#define IOCTL 01*CHUNK_SIZE -#define ESAR 02*CHUNK_SIZE -#define LANCE 03*CHUNK_SIZE -#define SCC0 04*CHUNK_SIZE -#define VDAC_HI 05*CHUNK_SIZE /* maxine only */ -#define SCC1 06*CHUNK_SIZE -#define VDAC_LO 07*CHUNK_SIZE /* maxine only */ -#define TOY 08*CHUNK_SIZE -#define ISDN 09*CHUNK_SIZE /* maxine only */ -#define ERRADDR 09*CHUNK_SIZE /* 3maxplus only */ -#define CHKSYN 10*CHUNK_SIZE /* 3maxplus only */ -#define ACCESS_BUS 10*CHUNK_SIZE /* maxine only */ -#define MCR 11*CHUNK_SIZE /* 3maxplus only */ -#define FLOPPY 11*CHUNK_SIZE /* maxine only */ -#define SCSI 12*CHUNK_SIZE -#define FLOPPY_DMA 13*CHUNK_SIZE /* maxine only */ -#define SCSI_DMA 14*CHUNK_SIZE -#define RESERVED_4 15*CHUNK_SIZE +#define SYSTEM_ROM (00*CHUNK_SIZE) /* ??? */ +#define IOCTL (01*CHUNK_SIZE) +#define ESAR (02*CHUNK_SIZE) +#define LANCE (03*CHUNK_SIZE) +#define SCC0 (04*CHUNK_SIZE) +#define VDAC_HI (05*CHUNK_SIZE) /* maxine only */ +#define SCC1 (06*CHUNK_SIZE) +#define VDAC_LO (07*CHUNK_SIZE) /* maxine only */ +#define TOY (08*CHUNK_SIZE) +#define ISDN (09*CHUNK_SIZE) /* maxine only */ +#define ERRADDR (09*CHUNK_SIZE) /* 3maxplus only */ +#define CHKSYN (10*CHUNK_SIZE) /* 3maxplus only */ +#define ACCESS_BUS (10*CHUNK_SIZE) /* maxine only */ +#define MCR (11*CHUNK_SIZE) /* 3maxplus only */ +#define FLOPPY (11*CHUNK_SIZE) /* maxine only */ +#define SCSI (12*CHUNK_SIZE) +#define FLOPPY_DMA (13*CHUNK_SIZE) /* maxine only */ +#define SCSI_DMA (14*CHUNK_SIZE) +#define RESERVED_4 (15*CHUNK_SIZE) /* * Offsets for IOCTL registers (relative to (system_base + IOCTL)) @@ -56,6 +56,7 @@ #define SSR 0x100 /* System Support Register */ #define SIR 0x110 /* System Interrupt Register */ #define SIMR 0x120 /* System Interrupt Mask Register */ +#define FCTR 0x1e0 /* Free-Running Counter */ /* * Handle partial word SCSI DMA transfers diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/kn02xa.h linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/kn02xa.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/kn02xa.h Tue Mar 28 04:27:23 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/kn02xa.h Sat Aug 5 15:35:24 2000 @@ -9,6 +9,7 @@ * * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions * are by curteousy of Chris Fraser. + * Copyright (C) 2000 Maciej W. Rozycki * * These are addresses which have to be known early in the boot process. * For other addresses refer to tc.h ioasic_addrs.h and friends. @@ -19,16 +20,12 @@ #include /* - * Motherboard regs (kseg1 addresses) - */ -#define KN02XA_SSR_ADDR KSEG1ADDR(0x1c040100) /* system control & status reg */ -#define KN02XA_SIR_ADDR KSEG1ADDR(0x1c040110) /* system interrupt reg */ -#define KN02XA_SIRM_ADDR KSEG1ADDR(0x1c040120) /* system interrupt mask reg */ - -/* * Some port addresses... * FIXME: these addresses are incomplete and need tidying up! */ -#define KN02XA_RTC_BASE (KSEG1ADDR(0x1c000000 + 0x200000)) /* ASIC + SL8 */ +#define KN02XA_IOASIC_BASE KSEG1ADDR(0x1c040000) /* I/O ASIC */ +#define KN02XA_RTC_BASE KSEG1ADDR(0x1e000000) /* RTC */ + +#define KN02XA_IOASIC_REG(r) (KN02XA_IOASIC_BASE+(r)) #endif /* __ASM_MIPS_DEC_KN02XA_H */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/kn03.h linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/kn03.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/dec/kn03.h Tue Mar 28 04:27:23 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/dec/kn03.h Sat Aug 5 15:35:31 2000 @@ -8,6 +8,7 @@ * * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions * are by curteousy of Chris Fraser. + * Copyright (C) 2000 Maciej W. Rozycki * * These are addresses which have to be known early in the boot process. * For other addresses refer to tc.h ioasic_addrs.h and friends. @@ -18,16 +19,12 @@ #include /* - * Motherboard regs (kseg1 addresses) - */ -#define KN03_SSR_ADDR KSEG1ADDR(0x1f840100) /* system control & status reg */ -#define KN03_SIR_ADDR KSEG1ADDR(0x1f840110) /* system interrupt reg */ -#define KN03_SIRM_ADDR KSEG1ADDR(0x1f840120) /* system interrupt mask reg */ - -/* * Some port addresses... * FIXME: these addresses are incomplete and need tidying up! */ -#define KN03_RTC_BASE (KSEG1ADDR(0x1f800000 + 0x200000)) /* ASIC + SL8 */ +#define KN03_IOASIC_BASE KSEG1ADDR(0x1f840000) /* I/O ASIC */ +#define KN03_RTC_BASE KSEG1ADDR(0x1fa00000) /* RTC */ + +#define KN03_IOASIC_REG(r) (KN03_IOASIC_BASE+(r)) #endif /* __ASM_MIPS_DEC_KN03_H */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/div64.h linux-mips-2.4.0-test5-20000731/include/asm-mips/div64.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/div64.h Tue Mar 28 04:27:19 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/div64.h Sun Aug 6 05:22:36 2000 @@ -1,4 +1,7 @@ -/* $Id: div64.h,v 1.1 2000/01/28 23:18:43 ralf Exp $ +/* + * include/asm-mips/div64.h + * + * Copyright (C) 2000 Maciej W. Rozycki * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -7,14 +10,104 @@ #ifndef _ASM_DIV64_H #define _ASM_DIV64_H +#include + /* - * Hey, we're already 64-bit, no - * need to play games.. + * No traps on overflows for any of these... */ -#define do_div(n,base) ({ \ - int __res; \ - __res = ((unsigned long) n) % (unsigned) base; \ - n = ((unsigned long) n) / (unsigned) base; \ - __res; }) + +#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) + +#define do_div64_32(res, high, low, base) ({ \ + unsigned long __quot, __mod; \ + unsigned long __cf, __tmp, __i; \ + \ + __asm__(".set push\n\t" \ + ".set noat\n\t" \ + ".set noreorder\n\t" \ + "b 1f\n\t" \ + " li %4,0x21\n" \ + "0:\n\t" \ + "sll $1,%0,0x1\n\t" \ + "srl %3,%0,0x1f\n\t" \ + "or %0,$1,$2\n\t" \ + "sll %1,%1,0x1\n\t" \ + "sll %2,%2,0x1\n" \ + "1:\n\t" \ + "bnez %3,2f\n\t" \ + "sltu $2,%0,%z5\n\t" \ + "bnez $2,3f\n\t" \ + "2:\n\t" \ + " addiu %4,%4,-1\n\t" \ + "subu %0,%0,%z5\n\t" \ + "addiu %2,%2,1\n" \ + "3:\n\t" \ + "bnez %4,0b\n\t" \ + " srl $2,%1,0x1f\n\t" \ + ".set pop" \ + : "=&r" (__mod), "=&r" (__tmp), "=&r" (__quot), "=&r" (__cf), \ + "=&r" (__i) \ + : "Jr" (base), "0" (high), "1" (low), "2" (0), "3" (0) \ + /* Aarrgh! Ran out of gcc's limit on constraints... */ \ + : "$1", "$2"); \ + \ + (res) = __quot; \ + __mod; }) + +#define do_div(n, base) ({ \ + unsigned long long __quot; \ + unsigned long __upper, __low, __high, __mod; \ + \ + __quot = (n); \ + __high = __quot >> 32; \ + __low = __quot; \ + __upper = __high; \ + \ + if (__high) \ + __asm__("divu $0,%z2,%z3" \ + : "=h" (__upper), "=l" (__high) \ + : "Jr" (__high), "Jr" (base)); \ + \ + __mod = do_div64_32(__low, __upper, __low, base); \ + \ + __quot = __high; \ + __quot = __quot << 32 | __low; \ + (n) = __quot; \ + __mod; }) + +#else + +#define do_div64_32(res, high, low, base) ({ \ + unsigned long __quot, __mod, __r0; \ + \ + __asm__("dsll32 %2,%z3,0\n\t" \ + "or %2,%2,%z4\n\t" \ + "ddivu $0,%2,%z5" \ + : "=h" (__mod), "=l" (__quot), "=&r" (__r0) \ + : "Jr" (high), "Jr" (low), "Jr" (base)); \ + \ + (res) = __quot; \ + __mod; }) + +#define do_div(n, base) ({ \ + unsigned long long __quot; \ + unsigned long __mod, __r0; \ + \ + __quot = (n); \ + \ + __asm__("dsll32 %2,%M3,0\n\t" \ + "or %2,%2,%L3\n\t" \ + "ddivu $0,%2,%z4\n\t" \ + "mflo %L1\n\t" \ + "dsra32 %M1,%L1,0\n\t" \ + "dsll32 %L1,%L1,0\n\t" \ + "dsra32 %L1,%L1,0" \ + : "=h" (__mod), "=r" (__quot), "=&r" (__r0) \ + : "r" (n), "Jr" (base)); \ + \ + (n) = __quot; \ + __mod; }) + +#endif #endif /* _ASM_DIV64_H */ From owner-linux-mips@oss.sgi.com Mon Aug 7 08:31:21 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 08:31:11 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:22027 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 08:30:57 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id IAA32547; Mon, 7 Aug 2000 08:30:02 -0700 Date: Mon, 7 Aug 2000 08:30:02 -0700 From: Keith M Wesolowski To: Nathan Fraser Cc: linux-mips@oss.sgi.com Subject: Re: [Install trouble] : mount failed: bad address Message-ID: <20000807083002.A32048@chem.unr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from ndf@shorts.cx on Mon, Aug 07, 2000 at 10:27:03PM +1000 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Aug 07, 2000 at 10:27:03PM +1000, Nathan Fraser wrote: > I just tried installing with vmlinux-000804-IP22-4400 and > hardhat-sgi-5.1.tar.gz - i get the same error as soon as the drive is > formatted and is mounted (ie: mount failed: bad address) I wonder if the DeadRat installer is using peecee style partition tables. If so, then this is probably the source of the trouble. The kernels I build, as you can see from the .config, don't support those, only SGI style disklabels. If the fdisk in the installer doesn't support that, then it won't work. It does seem odd though that you couldn't mount an existing EFS filesystem. There are also several problems with older fdisks; indeed, I think you still need one of my patches for the current one to work properly. The dated kernels I'm posting there are CVS from the 2.3/2.4 tree, built with a CVS compiler and binutils. I wouldn't go using those on a lark. For something as old as Hard Hat, maybe try the 2.2 kernel instead. I must admit to being the one person on this list who has never even attempted to install Hard Hat, though, so maybe I don't know what I'm talking about. :) -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Aug 7 08:52:40 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 08:52:30 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:28344 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 08:52:19 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id RAA04707; Mon, 7 Aug 2000 17:47:37 +0200 (MET DST) Date: Mon, 7 Aug 2000 17:47:36 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Ralf Baechle , Harald Koerfgen cc: Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: A workaround to DEC's RTC year weirdness Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, Following is a patch that is an ultimate attempt to make the RTC's year work for DECstations. It uses an extra BBU RAM's location to store the real year and the original year is used only as a reference, to make incrementing work. Changes address the handling of leap years, too. The two only drawbacks of the patch are as follows: - there has to be at least a single RTC update during a year, as that's the only situation the real year gets written into the BBU RAM, - if a machine is powered down long enough the firmware decides to reset contents the RTC, there is no other way to recover than to set time again. I've tested various dates on my machine and the changes proved to work. The current implementation is expected to work until 2255 -- at about 220, we'll have to change our epoch. The changes involved are not transparent, though. I've used the last BBU RAM's location that appears to be unused on my 3max+ (it's apparently true for the preceding one, too). The firmware wouldn't change either of bytes no matter what I invoked (the "d" command excluded, of course) and what I wrote into them. I couldn't test Ultrix and OSF/1 interoperability though. Neither could I test other machines. There appears to be some uncertainity on years permitted by the firmware, too. The original code quoted 70, 71 and 72 are permitted. My system permits 72 and 73 and also the original setting of the epoch suggests it is true. Therefore I strongly encourage everyone interested to test the code as much as possible. Apart from interoperability issues, changes are rather straightforward. Comments are welcomed, as usual. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/time.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/time.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/time.c Wed Jul 12 04:25:56 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/time.c Sun Aug 6 14:24:55 2000 @@ -424,7 +424,7 @@ void __init time_init(void) { - unsigned int year, mon, day, hour, min, sec; + unsigned int year, mon, day, hour, min, sec, real_year; int i; /* The Linux interpretation of the CMOS clock register contents: @@ -457,10 +457,12 @@ } /* * The DECstation RTC is used as a TOY (Time Of Year). - * The PROM will reset the year to either '70, '71 or '72. - * This hack will only work until Dec 31 2001. + * The PROM will reset the year to either '72 or '73. + * Therefore we store the real year separately, in one + * of unused BBU RAM locations. */ - year += 1928; + real_year = CMOS_READ(RTC_DEC_YEAR); + year += real_year - 72 + 2000; write_lock_irq(&xtime_lock); xtime.tv_sec = mktime(year, mon, day, hour, min, sec); diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/drivers/char/rtc.c linux-mips-2.4.0-test5-20000731/drivers/char/rtc.c --- linux-mips-2.4.0-test5-20000731.macro/drivers/char/rtc.c Mon Jul 24 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/drivers/char/rtc.c Sun Aug 6 14:22:34 2000 @@ -39,9 +39,10 @@ * 1.10a Andrea Arcangeli: Alpha updates * 1.10b Andrew Morton: SMP lock fix * 1.10c Cesar Barros: SMP locking fixes and cleanup + * 1.10d Maciej W. Rozycki: Handle DECstation's year weirdness. */ -#define RTC_VERSION "1.10c" +#define RTC_VERSION "1.10d" #define RTC_IO_EXTENT 0x10 /* Only really two ports, but... */ @@ -366,6 +367,9 @@ unsigned char mon, day, hrs, min, sec, leap_yr; unsigned char save_control, save_freq_select; unsigned int yrs; +#ifdef CONFIG_DECSTATION + unsigned int real_yrs; +#endif if (!capable(CAP_SYS_TIME)) return -EACCES; @@ -399,6 +403,20 @@ return -EINVAL; spin_lock_irq(&rtc_lock); +#ifdef CONFIG_DECSTATION + real_yrs = yrs; + yrs = 72; + + /* + * We want to keep the year set to 73 until March + * for non-leap years, so that Feb, 29th is handled + * correctly. + */ + if (!leap_yr && mon < 3) { + real_yrs--; + yrs = 73; + } +#endif if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { if (yrs > 169) { @@ -421,6 +439,9 @@ save_freq_select = CMOS_READ(RTC_FREQ_SELECT); CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); +#ifdef CONFIG_DECSTATION + CMOS_WRITE(real_yrs, RTC_DEC_YEAR); +#endif CMOS_WRITE(yrs, RTC_YEAR); CMOS_WRITE(mon, RTC_MONTH); CMOS_WRITE(day, RTC_DAY_OF_MONTH); @@ -474,7 +495,7 @@ spin_unlock_irq(&rtc_lock); return 0; } -#elif !defined(CONFIG_DECSTATION) +#endif case RTC_EPOCH_READ: /* Read the epoch. */ { return put_user (epoch, (unsigned long *)arg); @@ -493,7 +514,6 @@ epoch = arg; return 0; } -#endif default: return -EINVAL; } @@ -696,11 +716,11 @@ if (year > 20 && year < 48) { epoch = 1980; guess = "ARC console"; - } else if (year >= 48 && year < 70) { + } else if (year >= 48 && year < 72) { epoch = 1952; guess = "Digital UNIX"; - } else if (year >= 70 && year < 100) { - epoch = 1928; + } else if (year >= 72 && year < 74) { + epoch = 2000; guess = "Digital DECstation"; } if (guess) @@ -904,6 +924,9 @@ { unsigned long uip_watchdog = jiffies; unsigned char ctrl; +#ifdef CONFIG_DECSTATION + unsigned int real_year; +#endif /* * read RTC once any update in progress is done. The update @@ -932,6 +955,9 @@ rtc_tm->tm_mday = CMOS_READ(RTC_DAY_OF_MONTH); rtc_tm->tm_mon = CMOS_READ(RTC_MONTH); rtc_tm->tm_year = CMOS_READ(RTC_YEAR); +#ifdef CONFIG_DECSTATION + real_year = CMOS_READ(RTC_DEC_YEAR); +#endif ctrl = CMOS_READ(RTC_CONTROL); spin_unlock_irq(&rtc_lock); @@ -944,6 +970,10 @@ BCD_TO_BIN(rtc_tm->tm_mon); BCD_TO_BIN(rtc_tm->tm_year); } + +#ifdef CONFIG_DECSTATION + rtc_tm->tm_year += real_year - 72; +#endif /* * Account for differences between how the RTC uses the values diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/mc146818rtc.h linux-mips-2.4.0-test5-20000731/include/asm-mips/mc146818rtc.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/mc146818rtc.h Wed Aug 2 06:29:06 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/mc146818rtc.h Sat Aug 5 08:19:07 2000 @@ -48,4 +48,8 @@ #define RTC_IRQ 8 #endif +#ifdef CONFIG_DECSTATION +#define RTC_DEC_YEAR 0x3f /* Where we store the real year on DECs. */ +#endif + #endif /* _ASM_MC146818RTC_H */ From owner-linux-mips@oss.sgi.com Mon Aug 7 09:01:40 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 09:01:30 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:32184 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 09:01:06 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id RAA04813; Mon, 7 Aug 2000 17:56:52 +0200 (MET DST) Date: Mon, 7 Aug 2000 17:56:52 +0200 (MET DST) From: "Maciej W. Rozycki" To: Ralf Baechle , Harald Koerfgen cc: Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: BREAK and magic SysRq handling for Z8530 Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, It appears our current Z8530 driver lacks BREAK support. It also has the unfortunate side effect magic SysRq wouldn't work either, if we had it. Not anymore! The following patch adds both features to our Z8530 driver. It also allows the magic SysRq hack to be compiled-in (i.e. no more linking errors) even if no virtual terminal driver is build, which is suitable for certain configurations, including mine. Comments are welcomed, as usually. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/drivers/char/keyboard.c linux-mips-2.4.0-test5-20000731/drivers/char/keyboard.c --- linux-mips-2.4.0-test5-20000731.macro/drivers/char/keyboard.c Thu Feb 24 05:26:36 2000 +++ linux-mips-2.4.0-test5-20000731/drivers/char/keyboard.c Sun Aug 6 09:15:46 2000 @@ -158,7 +158,6 @@ #ifdef CONFIG_MAGIC_SYSRQ static int sysrq_pressed; -int sysrq_enabled = 1; #endif static struct pm_dev *pm_kbd = NULL; diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/drivers/char/serial.c linux-mips-2.4.0-test5-20000731/drivers/char/serial.c --- linux-mips-2.4.0-test5-20000731.macro/drivers/char/serial.c Mon Jul 24 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/drivers/char/serial.c Sun Aug 6 09:21:03 2000 @@ -597,7 +597,8 @@ printk("handling break...."); #endif #if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) - if (info->line == sercons.index) { + if (info->line == sercons.index + && sysrq_enabled) { if (!break_pressed) { break_pressed = jiffies; goto ignore_char; diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/drivers/char/sysrq.c linux-mips-2.4.0-test5-20000731/drivers/char/sysrq.c --- linux-mips-2.4.0-test5-20000731.macro/drivers/char/sysrq.c Tue Mar 28 04:26:29 2000 +++ linux-mips-2.4.0-test5-20000731/drivers/char/sysrq.c Sun Aug 6 09:17:58 2000 @@ -33,6 +33,8 @@ /* Machine specific power off function */ void (*sysrq_power_off)(void) = NULL; +int sysrq_enabled = 1; + EXPORT_SYMBOL(sysrq_power_off); /* Send a signal to all user processes */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/drivers/sbus/char/sunkbd.c linux-mips-2.4.0-test5-20000731/drivers/sbus/char/sunkbd.c --- linux-mips-2.4.0-test5-20000731.macro/drivers/sbus/char/sunkbd.c Sat Jul 15 04:26:34 2000 +++ linux-mips-2.4.0-test5-20000731/drivers/sbus/char/sunkbd.c Sun Aug 6 09:16:21 2000 @@ -177,9 +177,6 @@ static struct pt_regs * pt_regs; #ifdef CONFIG_MAGIC_SYSRQ -#ifndef CONFIG_PCI -int sysrq_enabled = 1; -#endif unsigned char sun_sysrq_xlate[128] = "\0\0\0\0\0\201\202\212\203\213\204\214\205\0\206\0" /* 0x00 - 0x0f */ "\207\210\211\0\0\0\0\0\0\0\0\0\0\03312" /* 0x10 - 0x1f */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/drivers/tc/zs.c linux-mips-2.4.0-test5-20000731/drivers/tc/zs.c --- linux-mips-2.4.0-test5-20000731.macro/drivers/tc/zs.c Sat Jul 8 04:26:53 2000 +++ linux-mips-2.4.0-test5-20000731/drivers/tc/zs.c Sun Aug 6 13:34:43 2000 @@ -6,6 +6,7 @@ * * DECstation changes * Copyright (C) 1998 Harald Koerfgen (Harald.Koerfgen@home.ivm.de) + * Copyright (C) 2000 Maciej W. Rozycki (macro@ds2.pg.gda.pl) * * For the rest of the code the original Copyright applies: * Copyright (C) 1996 Paul Mackerras (Paul.Mackerras@cs.anu.edu.au) @@ -50,6 +51,9 @@ #ifdef CONFIG_KGDB #include #endif +#ifdef CONFIG_MAGIC_SYSRQ +#include +#endif #include "zs.h" @@ -75,6 +79,10 @@ #ifdef CONFIG_SERIAL_CONSOLE static struct console sercons; #endif +#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) \ + && !defined(MODULE) +static unsigned long break_pressed; /* break, really ... */ +#endif #ifdef CONFIG_KGDB struct dec_zschannel *zs_kgdbchan; @@ -302,6 +310,8 @@ * ----------------------------------------------------------------------- */ +static int tty_break; /* Set whenever BREAK condition is detected. */ + /* * This routine is used by the interrupt handler to schedule * processing in the software interrupt portion of the driver. @@ -320,7 +330,7 @@ struct tty_struct *tty = info->tty; unsigned char ch, stat, flag; - while ((read_zsreg(info->zs_channel, 0) & Rx_CH_AV) != 0) { + while ((read_zsreg(info->zs_channel, R0) & Rx_CH_AV) != 0) { stat = read_zsreg(info->zs_channel, R1); ch = read_zsdata(info->zs_channel); @@ -330,13 +340,53 @@ if (ch == 0x03 || ch == '$') breakpoint(); if (stat & (Rx_OVR|FRM_ERR|PAR_ERR)) - write_zsreg(info->zs_channel, 0, ERR_RES); + write_zsreg(info->zs_channel, R0, ERR_RES); return; } #endif if (!tty) continue; + if (tty_break) { + tty_break = 0; +#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) + if (info->line == sercons.index && sysrq_enabled) { + if (!break_pressed) { + break_pressed = jiffies; + goto ignore_char; + } + break_pressed = 0; + } +#endif + flag = TTY_BREAK; + if (info->flags & ZILOG_SAK) + do_SAK(tty); + } else { + if (stat & Rx_OVR) { + flag = TTY_OVERRUN; + } else if (stat & FRM_ERR) { + flag = TTY_FRAME; + } else if (stat & PAR_ERR) { + flag = TTY_PARITY; + } else + flag = 0; + if (flag) + /* reset the error indication */ + write_zsreg(info->zs_channel, R0, ERR_RES); + } + +#if defined(CONFIG_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && !defined(MODULE) + if (break_pressed && info->line == sercons.index) { + if (ch != 0 && + time_before(jiffies, break_pressed + HZ*5)) { + handle_sysrq(ch, regs, NULL, NULL); + break_pressed = 0; + goto ignore_char; + } + break_pressed = 0; + } +#endif + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { static int flip_buf_ovf; ++flip_buf_ovf; @@ -348,26 +398,17 @@ if (flip_max_cnt < tty->flip.count) flip_max_cnt = tty->flip.count; } - if (stat & Rx_OVR) { - flag = TTY_OVERRUN; - } else if (stat & FRM_ERR) { - flag = TTY_FRAME; - } else if (stat & PAR_ERR) { - flag = TTY_PARITY; - } else - flag = 0; - if (flag) - /* reset the error indication */ - write_zsreg(info->zs_channel, 0, ERR_RES); + *tty->flip.flag_buf_ptr++ = flag; *tty->flip.char_buf_ptr++ = ch; + ignore_char: } tty_flip_buffer_push(tty); } static void transmit_chars(struct dec_serial *info) { - if ((read_zsreg(info->zs_channel, 0) & Tx_BUF_EMP) == 0) + if ((read_zsreg(info->zs_channel, R0) & Tx_BUF_EMP) == 0) return; info->tx_active = 0; @@ -380,7 +421,7 @@ } if ((info->xmit_cnt <= 0) || info->tty->stopped || info->tx_stopped) { - write_zsreg(info->zs_channel, 0, RES_Tx_P); + write_zsreg(info->zs_channel, R0, RES_Tx_P); return; } /* Send char */ @@ -395,15 +436,22 @@ static _INLINE_ void status_handle(struct dec_serial *info) { - unsigned char status; + unsigned char stat; /* Get status from Read Register 0 */ - status = read_zsreg(info->zs_channel, 0); + stat = read_zsreg(info->zs_channel, R0); + + if (stat & BRK_ABRT) { +#ifdef SERIAL_DEBUG_INTR + printk("handling break...."); +#endif + tty_break = 1; + } /* FIXEM: Check for DCD transitions */ - if (((status ^ info->read_reg_zero) & DCD) != 0 + if (((stat ^ info->read_reg_zero) & DCD) != 0 && info->tty && !C_CLOCAL(info->tty)) { - if (status & DCD) { + if (stat & DCD) { wake_up_interruptible(&info->open_wait); } else if (!(info->flags & ZILOG_CALLOUT_ACTIVE)) { if (info->tty) @@ -420,7 +468,7 @@ * The DCD bit doesn't seem to be inverted * like this. */ - if ((status & CTS) != 0) { + if ((stat & CTS) != 0) { if (info->tx_stopped) { info->tx_stopped = 0; if (!info->tx_active) @@ -432,8 +480,8 @@ } /* Clear status condition... */ - write_zsreg(info->zs_channel, 0, RES_EXT_INT); - info->read_reg_zero = status; + write_zsreg(info->zs_channel, R0, RES_EXT_INT); + info->read_reg_zero = stat; } /* @@ -459,7 +507,7 @@ shift = 0; /* Channel B */ for (;;) { - zs_intreg = read_zsreg(info->zs_chan_a, 3) >> shift; + zs_intreg = read_zsreg(info->zs_chan_a, R3) >> shift; if ((zs_intreg & CHAN_IRQMASK) == 0) break; From owner-linux-mips@oss.sgi.com Mon Aug 7 10:46:19 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 10:46:00 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:46859 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 10:45:40 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id KAA05058; Mon, 7 Aug 2000 10:44:56 -0700 Date: Mon, 7 Aug 2000 10:44:55 -0700 From: Keith M Wesolowski To: linuxce-devel@linuxce.org, linux-mips@oss.sgi.com Subject: Starting point for a wchan patch Message-ID: <20000807104455.B3164@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, This patch is a first attempt at a fix for the wchan BUG. It uses the stack unwinder from the oops tracer. Unfortunately the results it returns are often incorrect and even insane. I'm just hoping maybe it will trigger someone's thinking in the right direction; it's obviously nowhere near usable-quality. Index: arch/mips/kernel/process.c =================================================================== RCS file: /cvs/linux/arch/mips/kernel/process.c,v retrieving revision 1.20 diff -u -r1.20 process.c --- arch/mips/kernel/process.c 2000/07/11 02:32:10 1.20 +++ arch/mips/kernel/process.c 2000/08/04 23:36:32 @@ -197,6 +197,9 @@ { unsigned long schedule_frame; unsigned long pc; + unsigned int *sp; + extern char _stext, _etext; + unsigned long kstart, kend; if (!p || p == current || p->state == TASK_RUNNING) return 0; @@ -212,9 +215,21 @@ schedule_frame = ((unsigned long *)p->thread.reg30)[9]; return ((unsigned long *)schedule_frame)[16]; } - if (pc >= first_sched && pc < last_sched) { - printk(KERN_DEBUG "Bug in %s\n", __FUNCTION__); + sp = (unsigned int *)p->thread.reg29; + kstart = (unsigned long) &_stext; + kend = (unsigned long) &_etext; + if (pc < first_sched || pc >= last_sched) + goto out; + while ((unsigned long) sp & (PAGE_SIZE -1)) { + unsigned long addr; + if (!__get_user (addr, sp++)) + if (addr > kstart && addr < kend) { + /* Could be a valid caller */ + pc = addr; + if (pc < first_sched || pc >= last_sched) + goto out; + } } - +out: return pc; } How's that for a crock, huh? :) -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Aug 7 14:50:01 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 14:49:40 -0700 Received: from jarre.otscorp.com ([203.44.145.48]:55561 "EHLO shorts.cx") by oss.sgi.com with ESMTP id ; Mon, 7 Aug 2000 14:49:20 -0700 Received: from pikachu.house (ndf@pikachu.house [192.168.10.30]) by shorts.cx (8.11.0/8.11.0) with ESMTP id e77Lp2G09428; Tue, 8 Aug 2000 07:51:02 +1000 Date: Tue, 8 Aug 2000 07:51:00 +1000 (EST) From: Nathan Fraser X-Sender: ndf@pikachu.house To: Keith M Wesolowski cc: linux-mips@oss.sgi.com Subject: Re: [Install trouble] : mount failed: bad address In-Reply-To: <20000807083002.A32048@chem.unr.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing well if there is a way to get kernel, base system, vi and gcc going without using redhat I'd be VERY interested to hear :) On Mon, 7 Aug 2000, Keith M Wesolowski wrote: > On Mon, Aug 07, 2000 at 10:27:03PM +1000, Nathan Fraser wrote: > > > I just tried installing with vmlinux-000804-IP22-4400 and > > hardhat-sgi-5.1.tar.gz - i get the same error as soon as the drive is > > formatted and is mounted (ie: mount failed: bad address) > > I wonder if the DeadRat installer is using peecee style partition > tables. If so, then this is probably the source of the trouble. The > kernels I build, as you can see from the .config, don't support those, > only SGI style disklabels. If the fdisk in the installer doesn't > support that, then it won't work. It does seem odd though that you > couldn't mount an existing EFS filesystem. > > There are also several problems with older fdisks; indeed, I think you > still need one of my patches for the current one to work properly. > > The dated kernels I'm posting there are CVS from the 2.3/2.4 tree, > built with a CVS compiler and binutils. I wouldn't go using those on a > lark. For something as old as Hard Hat, maybe try the 2.2 kernel > instead. > > I must admit to being the one person on this list who has never even > attempted to install Hard Hat, though, so maybe I don't know what I'm > talking about. :) > > -- > Keith M Wesolowski wesolows@chem.unr.edu > University of Nevada http://www.chem.unr.edu > Chemistry Department Systems and Network Administrator > From owner-linux-mips@oss.sgi.com Mon Aug 7 14:58:01 2000 Received: by oss.sgi.com id ; Mon, 7 Aug 2000 14:57:51 -0700 Received: from smtpe.casema.net ([195.96.96.172]:42000 "HELO smtpe.casema.net") by oss.sgi.com with SMTP id ; Mon, 7 Aug 2000 14:57:36 -0700 Received: (qmail 32638 invoked from network); 7 Aug 2000 21:57:04 -0000 Received: from unknown (HELO penguin.nl) (195.96.116.1) by smtpe.casema.net with SMTP; 7 Aug 2000 21:57:04 -0000 Message-ID: <398F31FD.8C50931A@penguin.nl> Date: Tue, 08 Aug 2000 00:02:38 +0200 From: Richard X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.2.15 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: mailinglist Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing hi, how do i get of this mailing list? i've tried about everything. Richard From owner-linux-mips@oss.sgi.com Tue Aug 8 13:56:47 2000 Received: by oss.sgi.com id ; Tue, 8 Aug 2000 13:56:37 -0700 Received: from nilpferd.fachschaften.tu-muenchen.de ([129.187.176.79]:28153 "HELO nilpferd.fachschaften.tu-muenchen.de") by oss.sgi.com with SMTP id ; Tue, 8 Aug 2000 13:56:07 -0700 Received: (qmail 1747 invoked from network); 8 Aug 2000 20:55:35 -0000 Received: from neptun.fachschaften.tu-muenchen.de (129.187.176.23) by nilpferd.fachschaften.tu-muenchen.de with SMTP; 8 Aug 2000 20:55:35 -0000 Date: Tue, 8 Aug 2000 22:55:34 +0200 (CEST) From: Adrian Bunk X-Sender: bunk@neptun.fachschaften.tu-muenchen.de To: linux-mips@oss.sgi.com Subject: Problem with recent mips kernel from CVS Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I wasn't able to configure the kernel 2.4.0-test6-pre7 from CVS without creating the (empty) file linux/drivers/mtd/Config.in . After I created this file, configuring worked. cu, Adrian -- A "No" uttered from deepest conviction is better and greater than a "Yes" merely uttered to please, or what is worse, to avoid trouble. -- Mahatma Ghandi From owner-linux-mips@oss.sgi.com Tue Aug 8 15:05:08 2000 Received: by oss.sgi.com id ; Tue, 8 Aug 2000 15:04:50 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:17678 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Tue, 8 Aug 2000 15:04:22 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 4184C7F7; Wed, 9 Aug 2000 00:05:52 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id E632A8FF5; Mon, 7 Aug 2000 10:16:20 +0200 (CEST) Date: Mon, 7 Aug 2000 10:16:20 +0200 From: Florian Lohoff To: Famille Chauvat Cc: linux-mips@oss.sgi.com Subject: Re: [Install trouble] Message-ID: <20000807101620.B302@paradigm.rfc822.org> References: <39847F16.543AA232@free.fr> <20000804210304.C313@paradigm.rfc822.org> <398D7E42.88D4005E@free.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <398D7E42.88D4005E@free.fr>; from famille.chauvat@free.fr on Sun, Aug 06, 2000 at 03:03:30PM +0000 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Aug 06, 2000 at 03:03:30PM +0000, Famille Chauvat wrote: > Hi Florian, > > Thanks for your response. Humm, I don't know how to boot with rw support... > And, Keith M Wesolowski, see messages in this thread, modify the kernel to > have a ramdisk support. Look into /usr/src/linux/Documentation Booting with an "rw" root you just have to append "rw" to the command line you boot with ... > That what I don't understand, except a lot of another things :-), is how it > runs. You know, I took a lot of things on internet, I read a lot of papers, > perhaps not those I had to, and I've never ask to support or not the > ramdisk. So my question is, how the kernel I took doesn't support something > I never asked for. I'm not sure to be very clear :-) Not the kernel uses it - The installer does - The installer tries to create a /tmp filesystem in a ramdisk to proceed installation. When there is no ramdisk support the /tmp filesystem creation will fail. > With the new kernel I have, I've a new trouble. After the partition step, a > message "mount failed, bad address" appears and I 've to reboot. Of course, > the next time I'ld the same things. Any suggestion, any help, would be very > appreciate. No idea > Btw, if you know someone of your team or friends who speak french, it could > be better, for me, to explain what going wrong. Sorry - Cant help you :) Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Wed Aug 9 01:02:00 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 01:01:51 -0700 Received: from t111.niisi.ras.ru ([193.232.173.111]:41524 "EHLO t111.niisi.ras.ru") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 01:01:27 -0700 Received: from t06.niisi.ras.ru (t06.niisi.ras.ru [193.232.173.6]) by t111.niisi.ras.ru (8.9.1/8.9.1) with ESMTP id MAA32540; Wed, 9 Aug 2000 12:00:06 +0400 Received: (from uucp@localhost) by t06.niisi.ras.ru (8.7.6/8.7.3) with UUCP id LAA09694; Wed, 9 Aug 2000 11:49:30 +0400 Received: from niisi.msk.ru (t34 [193.232.173.34]) by niisi.msk.ru (8.8.8/8.8.8) with ESMTP id LAA17229; Wed, 9 Aug 2000 11:56:19 +0400 (MSD) Message-ID: <39911193.672C7E59@niisi.msk.ru> Date: Wed, 09 Aug 2000 12:08:51 +0400 From: "Gleb O. Raiko" Organization: NIISI RAN X-Mailer: Mozilla 4.72 [en] (WinNT; I) X-Accept-Language: en,ru MIME-Version: 1.0 To: "Maciej W. Rozycki" CC: Ralf Baechle , Harald Koerfgen , Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: BREAK and magic SysRq handling for Z8530 References: Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Maciej, "Maciej W. Rozycki" wrote: > > Hi, > > It appears our current Z8530 driver lacks BREAK support. It also has the > unfortunate side effect magic SysRq wouldn't work either, if we had it. > Not anymore! The following patch adds both features to our Z8530 driver. > It also allows the magic SysRq hack to be compiled-in (i.e. no more > linking errors) even if no virtual terminal driver is build, which is > suitable for certain configurations, including mine. > Have you tested the patch? The problem isn't in the patch itself, but as I see the zs driver is broken for a long time. At least, I used to patch heavily this driver for my Baget taht has 2 zs chips on board. Harald has the plans to implement new version of the driver, but I guess he is busy all the time. Or have I missed a cleanup of the driver ? Also, changes in sunkbd.c, keyboard.c, and serial.c isn't a good idea. :-) Regards, Gleb. From owner-linux-mips@oss.sgi.com Wed Aug 9 02:49:43 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 02:49:32 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:27846 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 02:49:07 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id LAA11527; Wed, 9 Aug 2000 11:38:37 +0200 (MET DST) Date: Wed, 9 Aug 2000 11:38:37 +0200 (MET DST) From: "Maciej W. Rozycki" To: "Gleb O. Raiko" cc: Ralf Baechle , Harald Koerfgen , Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: BREAK and magic SysRq handling for Z8530 In-Reply-To: <39911193.672C7E59@niisi.msk.ru> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Gleb, > Have you tested the patch? The problem isn't in the patch itself, but as Sure I did, to an extent I was able to. No problems noticed. > I see the zs driver is broken for a long time. At least, I used to patch > heavily this driver for my Baget taht has 2 zs chips on board. Harald Well, the driver seems to work good enough for now to use a serial console. And the SysRq support is an absolute must when trying to debug a locked-up kernel -- the lack of this support is a sign for me nobody is currently working on DECstations at the moment. > has the plans to implement new version of the driver, but I guess he is > busy all the time. Or have I missed a cleanup of the driver ? Hmm, I haven't noticed any, either. Fixing the driver is actually on my TODO list -- all the 8530 drivers present in Linux currently need to be merged into a single one. Also DMA and synchronous mode support has to be implemented. It's not on the top of my list, though. > Also, changes in sunkbd.c, keyboard.c, and serial.c isn't a good idea. > :-) It's actually the reverse. ;-) Without these (oh well, sunkbd.c is for completeness, indeed) you cannot compile-in the magic SysRq support if you do not include the virtual terminal driver. This is an unnecessary limitation -- I don't want the VT (well, actually I would, if I had a driver for my console, but I haven't, yet). Such changes actually went into the Linus' 2.4.0-test6-pre* (but not mine -- someone overtook me, and he also missed one bit ;-) ). Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Wed Aug 9 14:36:04 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 14:35:45 -0700 Received: from u-22.karlsruhe.ipdial.viaginterkom.de ([62.180.19.22]:37125 "EHLO u-22.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 14:35:28 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 9 Aug 2000 11:06:16 +0200 Date: Wed, 9 Aug 2000 11:06:16 +0200 From: Ralf Baechle To: Adrian Bunk Cc: linux-mips@oss.sgi.com Subject: Re: Problem with recent mips kernel from CVS Message-ID: <20000809110616.A9918@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from bunk@fs.tum.de on Tue, Aug 08, 2000 at 10:55:34PM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Aug 08, 2000 at 10:55:34PM +0200, Adrian Bunk wrote: > I wasn't able to configure the kernel 2.4.0-test6-pre7 from CVS without > creating the (empty) file linux/drivers/mtd/Config.in . After I created > this file, configuring worked. Strange. The current pre8 kernel has this file and it should be 3331 bytes. Just try cvs update. Ralf From owner-linux-mips@oss.sgi.com Wed Aug 9 14:36:14 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 14:36:05 -0700 Received: from u-22.karlsruhe.ipdial.viaginterkom.de ([62.180.19.22]:37125 "EHLO u-22.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 14:35:30 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 9 Aug 2000 18:13:57 +0200 Date: Wed, 9 Aug 2000 18:13:57 +0200 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: "Gleb O. Raiko" , Ralf Baechle , Harald Koerfgen , Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: BREAK and magic SysRq handling for Z8530 Message-ID: <20000809181357.B10906@bacchus.dhis.org> References: <39911193.672C7E59@niisi.msk.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Wed, Aug 09, 2000 at 11:38:37AM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Aug 09, 2000 at 11:38:37AM +0200, Maciej W. Rozycki wrote: > It's actually the reverse. ;-) Without these (oh well, sunkbd.c is for > completeness, indeed) you cannot compile-in the magic SysRq support if you > do not include the virtual terminal driver. This is an unnecessary > limitation -- I don't want the VT (well, actually I would, if I had a > driver for my console, but I haven't, yet). > > Such changes actually went into the Linus' 2.4.0-test6-pre* (but not mine > -- someone overtook me, and he also missed one bit ;-) ). That probably where Prumpf's changes; I recently discussed various problem with SysRq with him. I guess he only tried to fix the HP part of the problem. Ralf From owner-linux-mips@oss.sgi.com Wed Aug 9 16:09:16 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 16:08:59 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:3435 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 16:08:33 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id QAA01436 for ; Wed, 9 Aug 2000 16:13:58 -0700 (PDT) mail_from (jsimmons@acsu.buffalo.edu) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA04515 for ; Wed, 9 Aug 2000 16:07:38 -0700 (PDT) mail_from (jsimmons@acsu.buffalo.edu) Received: from mailrelay.acsu.buffalo.edu (mailrelay.acsu.buffalo.edu [128.205.7.101]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id QAA04543 for ; Wed, 9 Aug 2000 16:07:19 -0700 (PDT) mail_from (jsimmons@acsu.buffalo.edu) Received: (qmail 1772 invoked from network); 9 Aug 2000 23:07:16 -0000 Received: from ubppp233-118.dialin.buffalo.edu (128.205.233.118) by mailrelay with SMTP; 9 Aug 2000 23:07:16 -0000 Date: Wed, 9 Aug 2000 19:17:02 -0400 (EDT) From: James Simmons X-Sender: jsimmons@maxwell.futurevision.com To: i15@ornl.gov cc: linux-fbdev@vuser.vu.union.edu, linux@cthulhu.engr.sgi.com Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and evidence..:-) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > I would also like to ask, if SGI is likely to make the hardware specs OSS > (for cobalt etc.), so that those with the skill (this is not my forte, but > I will try...), can stabilise this otherwise competent port. Nope. SGI no longer supports Visual Workstations with linux. I don't even know if they support Visual Workstatiosn period. It would be nice if they did release the specs anyways :-) > 1. After boot , no matter what video mode one is in, the text console is > zippy. After using X (or changing modes using fbset) the text scrolling is > *painfully* slow. There is no apparent difference in the kernel mechanism > when switching, so is it just the boot state that works? Which X server? Sounds like the X server is doing the naughty. > Empirical observations (i.e. writing known patterns to the > /dev/fb0 device) indicate that SGI reverse RGB for 888 format, compared to > RGB565. That is red offset=0, green=8,blue=16 rather than red=24 etc.. I > have reversed the assignment in the "var" structure (in sgivwfb_set_var ) > and in setcolreg the offsets are used, but to no effect. What else needs > changing? Have a patch for this? Can you post it? ---------------------------------------------------------------------------- Innovation, innovate, and the concept of doing what everyone else did 20 years ago are registered trademarks of Microsoft Corporation. Other buzzwords, euphemisms, and blatant lies are trademarks of their respective owners. James Simmons [jsimmons@linux-fbdev.org] ____/| fbdev/console/gfx developer \ o.O| http://www.linux-fbdev.org =(_)= http://linuxgfx.sourceforge.net U http://linuxconsole.sourceforge.net From owner-linux-mips@oss.sgi.com Wed Aug 9 16:30:56 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 16:30:50 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:41325 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 16:30:05 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id QAA01685 for ; Wed, 9 Aug 2000 16:35:16 -0700 (PDT) mail_from (philloc@tigger.ccs.ornl.gov) From: philloc@tigger.ccs.ornl.gov Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA50004 for ; Wed, 9 Aug 2000 16:28:57 -0700 (PDT) mail_from (philloc@tigger.ccs.ornl.gov) Received: from tigger.ccs.ornl.gov (tigger.ccs.ornl.gov [134.167.16.90]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA06032 for ; Wed, 9 Aug 2000 16:28:48 -0700 (PDT) mail_from (philloc@tigger.ccs.ornl.gov) Received: from localhost (philloc@localhost) by tigger.ccs.ornl.gov (8.9.1/8.9.1) with ESMTP id TAA27407; Wed, 9 Aug 2000 19:28:08 -0400 (EDT) Date: Wed, 9 Aug 2000 19:28:07 -0400 Reply-To: i15@ornl.gov To: James Simmons cc: linux-fbdev@vuser.vu.union.edu, linux@cthulhu.engr.sgi.com Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and evidence..:-) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, > > > I would also like to ask, if SGI is likely to make the hardware specs OSS > > (for cobalt etc.), so that those with the skill (this is not my forte, but > > I will try...), can stabilise this otherwise competent port. > > Nope. SGI no longer supports Visual Workstations with linux. I don't even > know if they support Visual Workstatiosn period. It would be nice if they > did release the specs anyways :-) They support it on WindozeNT etc... I was toying with the idea of running VMware just to see what the X server will do under NT. Anyone from SGI care to comment on why SGI has not released the specs to reasonable attention, since they are unable to help port? As complex as the hardware is, the SGI guys did a pretty good job on the "hacks" they put in, so I am sure the specs would make it a breeze to port :-) > > > 1. After boot , no matter what video mode one is in, the text console is > > zippy. After using X (or changing modes using fbset) the text scrolling is > > *painfully* slow. There is no apparent difference in the kernel mechanism > > when switching, so is it just the boot state that works? > > Which X server? Sounds like the X server is doing the naughty. Oh not even X. X is fine in fact (with the exception it shivers and is tinted green in 32bit 1600x1200, and tinted green in 32bit 1280x1024 , but fine in 8-16bit for all modes). The problems is: machine boots. Text scrolling fine, no matter what I set it to in the kernel (in 8bit colour that is. 16bit and I lose the fonts). If you then fbset to ANY mode (say 800x600x8), and then do "ls -l", it is very slow. Now I have stared at the kernel for a bit, and the only thing that strikes me, is that on boot the frambuffer is initialised etc.., and it is possible that the hardware is in some sort of "bios" mode, which plays nice with the framebuffer. After boot, we switch the mode etc... but something is not tripped, or the kernel/video uses a different set of routines. I suppose I should ask, anyone else see this behaviour? > > > Empirical observations (i.e. writing known patterns to the > > /dev/fb0 device) indicate that SGI reverse RGB for 888 format, compared to > > RGB565. That is red offset=0, green=8,blue=16 rather than red=24 etc.. I > > have reversed the assignment in the "var" structure (in sgivwfb_set_var ) > > and in setcolreg the offsets are used, but to no effect. What else needs > > changing? > > Have a patch for this? Can you post it? If you want, but it has no effect, as bemusing as that sounds. I could post the framebuffer test program (generates a framebuffer-file full of "regular" colours, so you can deduce the settings visually- very nasty hack). Oh BTW, kernel is 2.2.13 with all SGI patches (before they yanked the OSS site),and a few mods of my own to get it to compile(inthe setup rotuines). Hey as an aside, anyone know how to "uncompress" a "vmlinuz" kernel to a "vmlinux"? SGI had posted a kernel or 2 , but always in the "vmlinuz" format. To the best of my knowledge cannot be booted on the VW 540. Finally, I looked at rewriting the visw_apic.c code upto 2.4 , to the new format. It looks do-able, but I know little about this, and I do not know if anyone else has had a hack yet. Cheers for now PHiL From owner-linux-mips@oss.sgi.com Wed Aug 9 17:31:16 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 17:31:07 -0700 Received: from smtp13.bellglobal.com ([204.101.251.52]:25508 "EHLO smtp13.bellglobal.com") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 17:30:34 -0700 Received: from free.fr (Quebec-City-ppp29135.qc.sympatico.ca [216.208.213.189]) by smtp13.bellglobal.com (8.8.5/8.8.5) with ESMTP id UAA06870; Wed, 9 Aug 2000 20:33:56 -0400 (EDT) Message-ID: <3991F7A3.FFC55F85@free.fr> Date: Thu, 10 Aug 2000 00:30:27 +0000 From: Famille Chauvat X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.9-27mdk i686) X-Accept-Language: fr-FR, en MIME-Version: 1.0 To: Nathan Fraser CC: linux-mips@oss.sgi.com Subject: Re: [Install trouble] : mount failed: bad address References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Please, don't keep it for yourself.... Philippe. From owner-linux-mips@oss.sgi.com Wed Aug 9 18:13:17 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 18:13:07 -0700 Received: from [204.94.214.10] ([204.94.214.10]:24145 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 18:12:45 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id SAA17147 for ; Wed, 9 Aug 2000 18:02:59 -0700 (PDT) mail_from (jsun@mvista.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id SAA53981 for ; Wed, 9 Aug 2000 18:10:02 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA35592 for ; Wed, 9 Aug 2000 18:08:25 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id SAA07442 for ; Wed, 9 Aug 2000 18:08:16 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id SAA17369; Wed, 9 Aug 2000 18:08:14 -0700 Message-ID: <3992007C.49050FC@mvista.com> Date: Wed, 09 Aug 2000 18:08:12 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr Subject: bug in the latest cache code? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf, I spent the last a few days to track down a problem where /sbin/init hangs forever. It turns out, I believe, to be a bug introduced in the recent cache code change. A new function, r4k_flush_icache_page_i32(), was added recently. It calls blast_icache32_page(), which uses Hit cache operations to flush cache. Unfortunately, that will generate TLB fault if virtual address is not present in TLB. Under certain conditions, r4k_flush_icache_page_i32() will be called in the middle of handling a page fault, and it will then generate the same page fault again with cache hit operation. This causes a deadlock (on current->mm->mmap_sem). I read the previous version of code. The fix seems to be using the indexed cache operation. Here is the fix, and apparently it fixes the problem on my board. Jun ----------- static void r4k_flush_icache_page_i32(struct vm_area_struct *vma, struct page *page, unsigned long address) { if (!(vma->vm_flags & VM_EXEC)) return; - blast_icache32_page(address); + address = KSEG0 + (address & PAGE_MASK & (dcache_size - 1)); + blast_icache32_page_indexed(address); } From owner-linux-mips@oss.sgi.com Wed Aug 9 19:39:08 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 19:38:58 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:29816 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 19:38:25 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id TAA06431 for ; Wed, 9 Aug 2000 19:43:57 -0700 (PDT) mail_from (nemoto@toshiba-tops.co.jp) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id TAA12238 for ; Wed, 9 Aug 2000 19:37:22 -0700 (PDT) Received: from deliverator.sgi.com (deliverator.sgi.com [150.166.91.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id TAA46148 for ; Wed, 9 Aug 2000 19:35:50 -0700 (PDT) mail_from (nemoto@toshiba-tops.co.jp) Received: from fwgate.toshiba-tops.co.jp (fwgate.toshiba-tops.co.jp [202.230.225.20]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id TAA24432 for ; Wed, 9 Aug 2000 19:28:12 -0700 (PDT) mail_from (nemoto@toshiba-tops.co.jp) Received: from topsms by fwgate.toshiba-tops.co.jp via smtpd (for deliverator.sgi.com [204.94.214.10]) with SMTP; 10 Aug 2000 02:35:46 UT Received: from srd2sd.toshiba-tops.co.jp (gw-chiba7.toshiba-tops.co.jp [172.17.244.27]) by newms.toshiba-tops.co.jp (8.9.3/3.7W-MailExchenger) with ESMTP id LAA02650; Thu, 10 Aug 2000 11:30:37 +0900 (JST) Received: by srd2sd.toshiba-tops.co.jp (8.9.3/3.5Wbeta-srd2sd) with ESMTP id LAA89823; Thu, 10 Aug 2000 11:30:37 +0900 (JST) To: jsun@mvista.com Cc: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr Subject: Re: bug in the latest cache code? From: Atsushi Nemoto In-Reply-To: <3992007C.49050FC@mvista.com> References: <3992007C.49050FC@mvista.com> X-Mailer: Mew version 1.94.1 on Emacs 20.5 / Mule 4.0 (HANANOEN) X-Fingerprint: EC 9D B9 17 2E 89 D2 25 CE F5 5D 3D 12 29 2A AD X-Pgp-Public-Key: http://pgp.nic.ad.jp/cgi-bin/pgpsearchkey.pl?op=get&search=0xB6D728B1 Organization: TOSHIBA Personal Computer System Corporation Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: <20000810113036S.nemoto@toshiba-tops.co.jp> Date: Thu, 10 Aug 2000 11:30:36 +0900 X-Dispatcher: imput version 990905(IM130) Lines: 25 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> On Wed, 09 Aug 2000 18:08:12 -0700, Jun Sun said: jsun> A new function, r4k_flush_icache_page_i32(), was added recently. jsun> It calls blast_icache32_page(), which uses Hit cache operations jsun> to flush cache. Unfortunately, that will generate TLB fault if jsun> virtual address is not present in TLB. Under certain jsun> conditions, r4k_flush_icache_page_i32() will be called in the jsun> middle of handling a page fault, and it will then generate the jsun> same page fault again with cache hit operation. This causes a jsun> deadlock (on current->mm->mmap_sem). To my knowlege, if the vierual address is not present in TLB, cache hit operation generates TLB refill exception, not TLB invalid exception. After the TLB refill excepsion, the cache instruction can continue execution without a page fault (no deadlock). I met the same deadlock problem on my r3k (with r4k-like cache) board with 2.2.12 based kernel. I doubted my TLB/cache codes first, but the real cause was in vt.c. _kd_mksound() modifies TLB refill handler code if mips_io_port_base == 0xa0000000. Modifing the #if-line near _kd_mksound() fixed my problem. Hope this helps. --- Atsushi Nemoto From owner-linux-mips@oss.sgi.com Wed Aug 9 20:44:29 2000 Received: by oss.sgi.com id ; Wed, 9 Aug 2000 20:44:19 -0700 Received: from jarre.otscorp.com ([203.44.145.48]:8459 "EHLO shorts.cx") by oss.sgi.com with ESMTP id ; Wed, 9 Aug 2000 20:44:04 -0700 Received: from jarre.house (ndf@jarre.house [192.168.10.1]) by shorts.cx (8.11.0/8.11.0) with ESMTP id e7A3kXs12327; Thu, 10 Aug 2000 13:46:33 +1000 Date: Thu, 10 Aug 2000 13:46:22 +1000 (EST) From: Nathan Fraser X-Sender: ndf@jarre.house To: Famille Chauvat cc: linux-mips@oss.sgi.com Subject: Re: [Install trouble] : mount failed: bad address In-Reply-To: <3991F7A3.FFC55F85@free.fr> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing i just used the indy sound kernel: vmlinux-indy-sound-2.2.1-990526.tgz from the testing directory and the install worked fine. After the install all works swell... Props to Ulf for the alsa driver! it works GREAT! On Thu, 10 Aug 2000, Famille Chauvat wrote: > Please, don't keep it for yourself.... > Philippe. > From owner-linux-mips@oss.sgi.com Thu Aug 10 10:40:28 2000 Received: by oss.sgi.com id ; Thu, 10 Aug 2000 10:40:09 -0700 Received: from u-173.karlsruhe.ipdial.viaginterkom.de ([62.180.19.173]:6404 "EHLO u-173.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 10 Aug 2000 10:39:38 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 10 Aug 2000 19:38:58 +0200 Date: Thu, 10 Aug 2000 19:38:58 +0200 From: Ralf Baechle To: Jun Sun Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: bug in the latest cache code? Message-ID: <20000810193858.A1478@bacchus.dhis.org> References: <3992007C.49050FC@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <3992007C.49050FC@mvista.com>; from jsun@mvista.com on Wed, Aug 09, 2000 at 06:08:12PM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Aug 09, 2000 at 06:08:12PM -0700, Jun Sun wrote: > I spent the last a few days to track down a problem where /sbin/init > hangs forever. It turns out, I believe, to be a bug introduced in the > recent cache code change. > > A new function, r4k_flush_icache_page_i32(), was added recently. It > calls blast_icache32_page(), which uses Hit cache operations to flush > cache. Unfortunately, that will generate TLB fault if virtual address > is not present in TLB. Under certain conditions, > r4k_flush_icache_page_i32() will be called in the middle of handling a > page fault, and it will then generate the same page fault again with > cache hit operation. This causes a deadlock (on current->mm->mmap_sem). > > I read the previous version of code. The fix seems to be using the > indexed cache operation. Here is the fix, and apparently it fixes the > problem on my board. I can see how this may happen and will take care of fixing this one. We really want to avoid using index operations. Unlike what the comment in the kernel code suggest they do overly flush caches which is pretty expensive. Ralf From owner-linux-mips@oss.sgi.com Thu Aug 10 10:51:58 2000 Received: by oss.sgi.com id ; Thu, 10 Aug 2000 10:51:49 -0700 Received: from gateway-490.mvista.com ([63.192.220.206]:64503 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Thu, 10 Aug 2000 10:51:32 -0700 Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id KAA04609; Thu, 10 Aug 2000 10:50:28 -0700 Message-ID: <3992EB64.8F2587A6@mvista.com> Date: Thu, 10 Aug 2000 10:50:28 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: Ralf Baechle CC: linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: bug in the latest cache code? References: <3992007C.49050FC@mvista.com> <20000810193858.A1478@bacchus.dhis.org> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > > On Wed, Aug 09, 2000 at 06:08:12PM -0700, Jun Sun wrote: > > > I spent the last a few days to track down a problem where /sbin/init > > hangs forever. It turns out, I believe, to be a bug introduced in the > > recent cache code change. > > > > A new function, r4k_flush_icache_page_i32(), was added recently. It > > calls blast_icache32_page(), which uses Hit cache operations to flush > > cache. Unfortunately, that will generate TLB fault if virtual address > > is not present in TLB. Under certain conditions, > > r4k_flush_icache_page_i32() will be called in the middle of handling a > > page fault, and it will then generate the same page fault again with > > cache hit operation. This causes a deadlock (on current->mm->mmap_sem). > > > > I read the previous version of code. The fix seems to be using the > > indexed cache operation. Here is the fix, and apparently it fixes the > > problem on my board. > > I can see how this may happen and will take care of fixing this one. > Thanks. Below is the stack trace and some of my notes on this problem. Hope this helps. I agree we should not use index operation abusively, but this is pretty serious problem. I don't think we can fix it easily without changing the arch-independent part of kernel. Jun ------------------------- more traces : the page fault is caused r4k_flush_icache_page_i32(), the first cache (Hit_....) operation. call stack when current->mm->sem has already been taken but r4k_flush_icache_page_i32() is still called. #0 jsun_bug () at r4xx0.c:1971 #1 0x8009aa60 in r4k_flush_icache_page_i32 (vma=0x811401e0, page=0x810476c0, address=263607008) at r4xx0.c:1986 #2 0x800b0320 in do_no_page (mm=0x81142080, vma=0x811401e0, address=263607008, write_access=0, page_table=0x811fed94) at memory.c:1162 #3 0x800b0508 in handle_mm_fault (mm=0x81142080, vma=0x811401e0, address=263607008, write_access=0) at memory.c:1202 #4 0x80094118 in do_page_fault (regs=0x81127f30, write=0, address=263607008) at fault.c:93 #5 0x8008ce98 in handle_tlbl () at r4k_misc.S:154 (263607008 = 0xfb652e0) The epc for #5 tlbl fault is 0xfb652e0, which means it is a page fault for the next instruction. **** annotated calling trace : handle_tlbl (in asm) - arch/mips/kernel/r4k_misc.S do_page_fault - arch/mips/mm/fault.c after check it is a good area swtich (handle_mm_fault(....) ) - line 93 [not visiable to gdb handle_mm_fault(...) - mm/memory.c ] alloc pte handle_pte_fault(...) check about the page and do_no_page(...) - mm/memory.c /* do a bunch of stuff but TLB entry for the new page is not built yet */ flush_page_to_ram(new_page); flush_icache_page(...) ( = r4k_flush_icache_page_i32) ; ==> jsun_bug() From owner-linux-mips@oss.sgi.com Fri Aug 11 00:55:21 2000 Received: by oss.sgi.com id ; Fri, 11 Aug 2000 00:55:11 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:5705 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 11 Aug 2000 00:54:40 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id AAA16218 for ; Fri, 11 Aug 2000 00:46:35 -0700 (PDT) mail_from (shm@cthulhu.engr.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id AAA07490 for ; Fri, 11 Aug 2000 00:52:24 -0700 (PDT) Received: from tantrik.engr.sgi.com (tantrik.engr.sgi.com [130.62.52.189]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA31668; Fri, 11 Aug 2000 00:50:52 -0700 (PDT) mail_from (shm@cthulhu.engr.sgi.com) Received: from localhost (shm@localhost) by tantrik.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA33097; Fri, 11 Aug 2000 00:50:52 -0700 (PDT) Date: Fri, 11 Aug 2000 00:50:51 -0700 From: Shrijeet Mukherjee cc: linux-fbdev@vuser.vu.union.edu, Linux porting team Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and evidence..:-) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 9 Aug 2000 philloc@tigger.ccs.ornl.gov wrote: > Hi, >> >> > I would also like to ask, if SGI is likely to make the hardware specs OSS >> > (for cobalt etc.), so that those with the skill (this is not my forte, but >> > I will try...), can stabilise this otherwise competent port. >> >> Nope. SGI no longer supports Visual Workstations with linux. I don't even >> know if they support Visual Workstatiosn period. It would be nice if they >> did release the specs anyways :-) > They support it on WindozeNT etc... I was toying with the idea of >running VMware just to see what the X server will do under NT. > So just to make the statement sound right. SGI never officially supported linux on the Visual Workstation 320. The current line of the Visual Workstation family, the 230, 330 and 530 all do and will support highly accelerated OpenGL under linux. > > Anyone from SGI care to comment on why SGI has not released the >specs to reasonable attention, since they are unable to help port? > >As complex as the hardware is, the SGI guys did a pretty good job on the >"hacks" they put in, so I am sure the specs would make it a breeze to port >:-) > Actually a "port" is not that simple. The real problem for opening up the driver port that we worked on, is that there are critical parts of SGI driver mode IP in there that we are not ready to open source at this point. Given that, the software is the best "spec" and documentation we have at this point .. this is a real issue. >> >> > 1. After boot , no matter what video mode one is in, the text console is >> > zippy. After using X (or changing modes using fbset) the text scrolling is >> > *painfully* slow. There is no apparent difference in the kernel mechanism >> > when switching, so is it just the boot state that works? >> >> Which X server? Sounds like the X server is doing the naughty. > Oh not even X. X is fine in fact (with the exception it shivers >and is tinted green in 32bit 1600x1200, and tinted green in 32bit >1280x1024 , but fine in 8-16bit for all modes). > I remember there being some issue about stuff being ABGR or some strange format in some cases, which was screwing things up. Is this happening only under WindowMaker or was it Enlightenment .. some window manager was causing problems since it used X BLT's .. > The problems is: > > machine boots. Text scrolling fine, no matter what I set it to >in the kernel (in 8bit colour that is. 16bit and I lose the fonts). If you >then fbset to ANY mode (say 800x600x8), and then do "ls -l", it is very >slow. Now I have stared at the kernel for a bit, and the only thing that >strikes me, is that on boot the frambuffer is initialised etc.., and it is >possible that the hardware is in some sort of "bios" mode, which plays >nice with the framebuffer. After boot, we switch the mode etc... but >something is not tripped, or the kernel/video uses a different set of >routines. > > I suppose I should ask, anyone else see this behaviour? > >> >> > Empirical observations (i.e. writing known patterns to the >> > /dev/fb0 device) indicate that SGI reverse RGB for 888 format, compared to >> > RGB565. That is red offset=0, green=8,blue=16 rather than red=24 etc.. I >> > have reversed the assignment in the "var" structure (in sgivwfb_set_var ) >> > and in setcolreg the offsets are used, but to no effect. What else needs >> > changing? >> Hope this helps some. -- -------------------------------------------------------------------------- Shrijeet Mukherjee, MTS Advanced Graphics, SGI http://reality.sgi.com/shm_engr phone: 650-933-5312 email: shm@sgi.com, shrijeet@hotmail.com -------------------------------------------------------------------------- Where there is a will, there is a way. If a way cannot be found, it is the will that is suspect .. -- shm From owner-linux-mips@oss.sgi.com Fri Aug 11 18:51:11 2000 Received: by oss.sgi.com id ; Fri, 11 Aug 2000 18:50:51 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:2632 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 11 Aug 2000 18:50:32 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id SAA07047 for ; Fri, 11 Aug 2000 18:42:56 -0700 (PDT) mail_from (aboyanic@gloose.scis.cowan.edu.au) From: aboyanic@gloose.scis.cowan.edu.au Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA76663 for ; Fri, 11 Aug 2000 18:50:13 -0700 (PDT) mail_from (aboyanic@gloose.scis.cowan.edu.au) Received: from gloose.scis.cowan.edu.au ([139.230.35.235]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id SAA02871 for ; Fri, 11 Aug 2000 18:49:47 -0700 (PDT) mail_from (aboyanic@gloose.scis.cowan.edu.au) Received: from localhost (aboyanic@localhost) by gloose.scis.cowan.edu.au (8.9.3/8.9.3) with ESMTP id JAA04497 for ; Sat, 12 Aug 2000 09:56:01 +0400 Date: Sat, 12 Aug 2000 09:56:01 +0400 (MSD) To: linux@cthulhu.engr.sgi.com Subject: Old Clunkers Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I'm interested in looking into porting to some of the more antique machines. I have recently aquired a Power 4D-210 with 256mb ram. The machine still functions but no chance of an OS for it Irix 5.3. I'm experianced at linux & NetBSD porting to the Sun platform and this will be my first attempt at anything with SGI hardware. I'm looking for expressions of interest from other people out there that preferably have access to anything from the Power 4D range still working and with a little time to spare. If you have a broken machine and are still interested please let me know and we can discuss techniques for getting it working. To anyone reading this from SGI. Any chance of getting some of the bus architecture, or any other specs on the older Power 4D systems? Apart from various web pages on the machines I am almost completely bumbling around in the dark. Regs Alastair Boyanich Edith Cowan University (Western Australia) From owner-linux-mips@oss.sgi.com Sat Aug 12 19:48:34 2000 Received: by oss.sgi.com id ; Sat, 12 Aug 2000 19:48:24 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:54625 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 12 Aug 2000 19:48:07 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id TAA08993 for ; Sat, 12 Aug 2000 19:54:09 -0700 (PDT) mail_from (greatates@fasttrec.com) From: greatates@fasttrec.com Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id TAA05203; Sat, 12 Aug 2000 19:47:47 -0700 (PDT) mail_from (greatates@fasttrec.com) Received: from www.fasttrec.com (sdn-ar-002mnminnP271.dialsprint.net [206.133.127.73]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id TAA07226; Sat, 12 Aug 2000 19:47:44 -0700 (PDT) mail_from (greatates@fasttrec.com) Subject: ADV: Great Rate Insurance!! Date: Sat, 12 Aug 2000 18:13:46 Message-Id: <301.752911.322545@www.fasttrec.com> To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing To be removed from our mailing list, please visit http://www.supersitescentral.com/bestrates/remove.html Tired of Paying HIGH Prices for Term Insurance? Find Out What Your Life Insurance Should Really Cost! Visit http://www.supersitescentral.com/bestrates NOW! We are a national brokerage tracking the prices of top insurance companies in America. We also specialize in markets for all types of tobacco users as well as those who have medical impairments/ conditions. You can lock in guaranteed low rates for up to 30-years. For more information visit http://www.supersitescentral.com/bestrates without delay! From owner-linux-mips@oss.sgi.com Sun Aug 13 08:17:55 2000 Received: by oss.sgi.com id ; Sun, 13 Aug 2000 08:17:35 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:2671 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 13 Aug 2000 08:17:29 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id IAA06004 for ; Sun, 13 Aug 2000 08:23:34 -0700 (PDT) mail_from (alan@lxorguk.ukuu.org.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA49623 for ; Sun, 13 Aug 2000 08:17:07 -0700 (PDT) mail_from (alan@lxorguk.ukuu.org.uk) Received: from the-village.bc.nu (lightning.swansea.uk.linux.org [194.168.151.1]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id IAA08644 for ; Sun, 13 Aug 2000 08:17:00 -0700 (PDT) mail_from (alan@lxorguk.ukuu.org.uk) Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 13NzPH-0001bK-00; Sun, 13 Aug 2000 16:10:35 +0100 Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and To: i15@ornl.gov Date: Sun, 13 Aug 2000 16:10:31 +0100 (BST) Cc: jsimmons@acsu.buffalo.edu (James Simmons), linux-fbdev@vuser.vu.union.edu, linux@cthulhu.engr.sgi.com In-Reply-To: from "philloc@tigger.ccs.ornl.gov" at Aug 09, 2000 07:28:07 PM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Anyone from SGI care to comment on why SGI has not released the > specs to reasonable attention, since they are unable to help port? Try getting the sources for the 3d driver and graphics components on their current workstation. > Hey as an aside, anyone know how to "uncompress" a "vmlinuz" > kernel to a "vmlinux"? SGI had posted a kernel or 2 , but always in the > "vmlinuz" format. To the best of my knowledge cannot be booted > on the VW 540. gzip -d vmlinux should be fine. From owner-linux-mips@oss.sgi.com Sun Aug 13 18:42:51 2000 Received: by oss.sgi.com id ; Sun, 13 Aug 2000 18:42:31 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:45947 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 13 Aug 2000 18:42:18 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id SAA01602 for ; Sun, 13 Aug 2000 18:48:25 -0700 (PDT) mail_from (laso@puzzledog.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id SAA29436 for ; Sun, 13 Aug 2000 18:41:47 -0700 (PDT) Received: from deliverator.sgi.com (deliverator.sgi.com [150.166.91.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA25154 for ; Sun, 13 Aug 2000 18:40:15 -0700 (PDT) mail_from (laso@puzzledog.com) Received: from mylocalserver.com (pool0189.cvx10-bradley.dialup.earthlink.net [209.178.182.189]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id SAA16923 for ; Sun, 13 Aug 2000 18:32:25 -0700 (PDT) mail_from (laso@puzzledog.com) Date: Sun, 13 Aug 2000 18:35:43 -0800 From: brponge@puzzledog.com Message-Id: <4utq3w6k2m8twji.22o17s6e0o4q@mylocalserver.com> Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Subject: ~Compete with the "Big Boys" for Online Profits!! To: aflne@puzzledog.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing
EARN RESIDUAL INCOME USING THE WORLD'S FASTEST GROWING SERVICE (*see footnote)
 
THIS MAY BE YOUR ONLY CHANCE TO PARTICIPATE IN "THE GREATEST LEGAL CREATION OF WEALTH IN HISTORY!!
 
ORDER OUR FREE VIDEOTAPE AND 4-PAGE EXECUTIVE SUMMARY WITHOUT OBLIGATION!
 
CALL 888-277-7691 TODAY!
 
We are seeking qualified representatives for a new, rapidly-expanding company* (see footnote), which is owned by a 15-year-old, publicly-traded corporation that has the highest possible Dunn & Bradstreet rating of 5-A1!!
 
Almost everyone who is aware of this service's rapid growth has at some time envisioned themselves using it as a vehicle to build a profitable business while working entirely from home!
 
    - Today, only 25% of North Americans now use this service in their homes.
    - However, EIGHTY-FIVE THOUSAND new customers use this service daily! 
    - Its overall use is doubling every 100 days, and
    - Business done using this service should reach $300 Billion by 2002!
 
THIS COMPANY CAN PROVIDE ALL THE RESOURCES AND TOOLS YOU NEED to start your own home business TODAY and thus POSITION YOURSELF to take MAXIMAL ADVANTAGE of this service's FUTURE EXPONENTIAL GROWTH!!
 
MOTIVATED INDIVIDUALS are needed IMMEDIATELY to market this company's multiple services throught the United States and Japan. THE MOST SUCCESSFUL REPRESENTATIVES will be those who TAKE IMMEDIATE ACTION by using the company's EXTENSIVE RESOURCES AND SUPPORT to build their own businesses. New representatives should ideally be able to invest at least $500 to $1000 in startup costs (although anyone can join the company by purchasing a $25 Rep Kit.)
 
DON'T MISS YOUR CHANCE TO PARTICIPATE!!
 
LET US HELP YOU START BUILDING..
 
CALL TOLL FREE: 1-888-277-7691 TODAY!!
 
PLEASE NOTE: When you call, you will be prompted to leave your name, full mailing address, telephone number, and email address. When you do so, you will receive, free of charge or obligation,
 
     1) A 12-MINUTE VIDEOTAPE OUTLINING OUR REMARKABLE OPPORTUNITY!
     2) A FOUR-PAGE EXECUTIVE SUMMARY OF OUR BUSINESS!
 
CALL 1-888-277-7691 AND REQUEST YOUR FREE MATERIALS TODAY!
 
 
FOOTNOTE:
 
       *(Company policy prohibits us from either using its proper name or describing its specific services in this
          "first contact" advertisement. These details will become clear after reviewing the free materials and speaking with us.)
 
If you wish to be PERMANENTLY REMOVED from all of our mailing lists, email us at:
 
 
You will then be PERMANENTLY REMOVED FROM ALL FUTURE MAILINGS.
 
THANK YOU!
From owner-linux-mips@oss.sgi.com Mon Aug 14 03:02:16 2000 Received: by oss.sgi.com id ; Mon, 14 Aug 2000 03:02:06 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:54385 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 14 Aug 2000 03:01:45 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id CAA17190 for ; Mon, 14 Aug 2000 02:54:10 -0700 (PDT) mail_from (tkwriter@vanc.igs.net) From: tkwriter@vanc.igs.net Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id DAA92714 for ; Mon, 14 Aug 2000 03:01:14 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA73929; Mon, 14 Aug 2000 02:58:24 -0700 (PDT) mail_from (tkwriter@vanc.igs.net) Received: from buddy.pacificcoast.net (buddy.pacificcoast.net [216.86.100.2]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA09340; Mon, 14 Aug 2000 02:58:23 -0700 (PDT) mail_from (tkwriter@vanc.igs.net) Received: from pacificcoast.net (bct140-107.gen.pacificcoast.net [209.53.140.107]) by buddy.pacificcoast.net (8.9.1a/8.9.1) with SMTP id BAA31993; Mon, 14 Aug 2000 01:43:44 -0700 Date: Mon, 14 Aug 2000 01:43:44 -0700 Message-Id: <200008140843.BAA31993@buddy.pacificcoast.net> Reply-To: tkwriter@vanc.igs.net To: tkwriter@vanc.igs.net Subject: Documentation Specialist Seeking Contract Work Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Documentation Specialists Seeking Contract Work - Technical Writing, graphics, Robohelp, HTML, SGML, etc. Senior technical writers, project leaders and electronic documentation specialists seek contract work. Clients have included companies such as Microsoft and Koch Petroleum. Excellent communication skills, able to work with all levels of the company from programmers to CEO. Excellent background in technical, marketing and creative writing. Familiar with educational material as well as e-commerce. Writing samples, full resume and references available on request. Experience in creating both published and online documentation. REQUIRED: Prefer Corp to Corp Sole relationship directly with the client. Agents are also welcome in the same capacity. Production is done at our facility. We are fully equipped. PLEASE REPLY ONLY BY PHONE Contact - Casey Lea - TO INQUIRE ABOUT SERVICES, AVAILABILITY, OR TO CONFIRM REMOVAL FROM OUR LIST CALL 604-685-8348 PST Rates: Fees are charged by the hour or by the project. ------------------- This message is sent in compliance of the new e-mail bill: SECTION 301. Per Section 301, Paragraph (a)(2)(C) of S. 1618, http://www.senate.gov/~murkowski/commercialemail/S771index.html___________________________________________________________ This Message was Composed by a user of Extractor Pro '98 Bulk E- Mail Software. If you wish to be removed from this advertiser's future mailings, please reply with the subject "Remove" and this software will automatically block you from their future mailings. From owner-linux-mips@oss.sgi.com Mon Aug 14 04:41:36 2000 Received: by oss.sgi.com id ; Mon, 14 Aug 2000 04:41:16 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:53495 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 14 Aug 2000 04:40:52 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id NAA17800; Mon, 14 Aug 2000 13:39:48 +0200 (MET DST) Date: Mon, 14 Aug 2000 13:39:47 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Ralf Baechle , Harald Koerfgen cc: Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: NTP support code updates Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, Wondering why my RTC's time drifts away when the NTP daemon is running I discovered to my surprise that our NTP support code is still of 2.0 vintage and simply does not work. As a result set_rtc_mmss() does not get called at all. The following patch updates the relevant code for both MIPS and MIPS64 to match the rest of the kernel. I've only tested the DEC path but changes are straightforward and should work for all variations. [Hmm, now my dispersion changes between 1 and 0.1 -- the set_rtc_mmss() function resets the RTC's divider and as a result further timer interrupts do not arrive exactly at the right time. This probably cannot be avoided (apart from by disabling set_rtc_mmss()) but the code needs to be updated regardless.] Comments are welcomed, as usually. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/baget/time.c linux-mips-2.4.0-test5-20000731/arch/mips/baget/time.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/baget/time.c Tue Mar 28 04:26:01 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/baget/time.c Sat Aug 12 21:47:26 2000 @@ -76,21 +76,22 @@ void do_gettimeofday(struct timeval *tv) { - unsigned long flags; + unsigned long flags; - save_and_cli(flags); - *tv = xtime; - restore_flags(flags); + save_and_cli(flags); + *tv = xtime; + restore_flags(flags); } void do_settimeofday(struct timeval *tv) { - unsigned long flags; + unsigned long flags; - save_and_cli(flags); - xtime = *tv; - time_state = TIME_BAD; - time_maxerror = MAXPHASE; - time_esterror = MAXPHASE; - restore_flags(flags); -} + save_and_cli(flags); + xtime = *tv; + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + restore_flags(flags); +} diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/time.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/time.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/time.c Wed Jul 12 04:25:56 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/time.c Sat Aug 12 21:58:23 2000 @@ -187,6 +187,7 @@ void do_settimeofday(struct timeval *tv) { write_lock_irq(&xtime_lock); + /* This is revolting. We need to set the xtime.tv_usec * correctly. However, the value in this location is * is value at the last tick. @@ -199,10 +200,13 @@ tv->tv_usec += 1000000; tv->tv_sec--; } + xtime = *tv; - time_state = TIME_BAD; - time_maxerror = MAXPHASE; - time_esterror = MAXPHASE; + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + write_unlock_irq(&xtime_lock); } @@ -307,13 +311,15 @@ * called as close as possible to 500 ms before the new second starts. */ read_lock(&xtime_lock); - if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 && - xtime.tv_usec > 500000 - (tick >> 1) && - xtime.tv_usec < 500000 + (tick >> 1)) { + if ((time_status & STA_UNSYNC) == 0 + && xtime.tv_sec > last_rtc_update + 660 + && xtime.tv_usec >= 500000 - tick / 2 + && xtime.tv_usec <= 500000 + tick / 2) { if (set_rtc_mmss(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else - last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ + /* do it again in 60 s */ + last_rtc_update = xtime.tv_sec - 600; } /* As we return to user mode fire off the other CPU schedulers.. this is basically because we don't yet share IRQ's around. This message is diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/sgi/kernel/indy_timer.c linux-mips-2.4.0-test5-20000731/arch/mips/sgi/kernel/indy_timer.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/sgi/kernel/indy_timer.c Tue Mar 28 04:26:13 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/sgi/kernel/indy_timer.c Sat Aug 12 21:25:13 2000 @@ -290,8 +290,9 @@ { write_lock_irq(&xtime_lock); xtime = *tv; - time_state = TIME_BAD; - time_maxerror = MAXPHASE; - time_esterror = MAXPHASE; + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; write_unlock_irq(&xtime_lock); } diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips64/sgi-ip22/ip22-timer.c linux-mips-2.4.0-test5-20000731/arch/mips64/sgi-ip22/ip22-timer.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips64/sgi-ip22/ip22-timer.c Mon Mar 27 04:26:15 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips64/sgi-ip22/ip22-timer.c Sat Aug 12 21:32:29 2000 @@ -288,8 +288,9 @@ { write_lock_irq(&xtime_lock); xtime = *tv; - time_state = TIME_BAD; - time_maxerror = MAXPHASE; - time_esterror = MAXPHASE; + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; write_unlock_irq(&xtime_lock); } diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips64/sgi-ip27/ip27-timer.c linux-mips-2.4.0-test5-20000731/arch/mips64/sgi-ip27/ip27-timer.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips64/sgi-ip27/ip27-timer.c Thu Jul 13 04:26:16 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips64/sgi-ip27/ip27-timer.c Sat Aug 12 21:33:21 2000 @@ -206,9 +206,9 @@ xtime = *tv; time_adjust = 0; /* stop active adjtime() */ - time_state = TIME_BAD; - time_maxerror = MAXPHASE; - time_esterror = MAXPHASE; + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; write_unlock_irq(&xtime_lock); } From owner-linux-mips@oss.sgi.com Mon Aug 14 05:16:06 2000 Received: by oss.sgi.com id ; Mon, 14 Aug 2000 05:15:56 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:2040 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 14 Aug 2000 05:15:38 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA18734; Mon, 14 Aug 2000 14:15:22 +0200 (MET DST) Date: Mon, 14 Aug 2000 14:15:21 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Ralf Baechle , Harald Koerfgen cc: Craig P Prescott , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Non-contiguous memory support Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, Following is a patch that provides support for non-contiguous memory. This is needed at least for MS02-based DECstations in mixed memory configurations, where 24MB holes exist between 8MB memory modules. I decided to write it in a generic way, hence the code is common to all MIPS platforms, removing tons of now unnecessary duplicate code. It's modelled after the E820 memory support for i386 and provides similar functionality, i.e. platform-specific backends can obtain a memory map in a system-dependent fashion and register it with the generic code. Later, the map may get either accepted or overridden by a command line providing a series of "mem=@" statements. The latter may be useful for developers to avoid pulling away memory modules to get specific memory configurations tested (e.g. low memory performance). The generic code registers the memory map in '/proc/iomem' just like it happens for other platforms -- here is an example output from my machine: $ cat /proc/iomem 00000000-067fffff : System RAM 00040000-00298e7f : Kernel code 002ac0a0-00344b0f : Kernel data 08000000-087fffff : System RAM 0a000000-0a7fffff : System RAM 0c000000-0c7fffff : System RAM Eventually all memory-mapped resources should get registered there, but this is something for a start. The code from arc/memory.c to place the bootmem allocator bitmap in the largest area available got removed. The bitmap gets always placed right above the kernel. I don't really think it should really matter, but if it did, I may add this code in a generic way (people interested in such machines, please make comments). I removed orion/misc.c completely instead of rewriting it -- orion/setup.c contains everything the former did and more. I tried to fix every system supported, but a few look weird -- they do not provide prom_init(), thus I am not sure how they even can be started by kernel/setup.c. As a result their memory initialization code remains intact (non-existent?). That aside, the memory initialization should look fairly sane now. The DEC path was tested as usual -- others did not. If there are any specific questions about some part of the code, I am looking forward to read them. Comments are welcomed, as usually. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/arc/cmdline.c linux-mips-2.4.0-test5-20000731/arch/mips/arc/cmdline.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/arc/cmdline.c Tue Mar 28 04:26:00 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/arc/cmdline.c Sun Aug 13 12:14:21 2000 @@ -14,7 +14,7 @@ /* #define DEBUG_CMDLINE */ -char arcs_cmdline[CL_SIZE]; +char arcs_cmdline[COMMAND_LINE_SIZE]; char * __init prom_getcmdline(void) { diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/arc/memory.c linux-mips-2.4.0-test5-20000731/arch/mips/arc/memory.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/arc/memory.c Wed Jul 5 04:25:46 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/arc/memory.c Sun Aug 13 20:37:39 2000 @@ -47,31 +47,25 @@ "LoadedProgram", "FirmwareTemporary", "FirmwarePermanent", - "FreeContigiuous" + "FreeContiguous" }; #define mtypes(a) (prom_flags & PROM_FLAG_ARCS) ? arcs_mtypes[a.arcs] : arc_mtypes[a.arc] #endif -static struct prom_pmemblock pblocks[PROM_MAX_PMEMBLOCKS]; - -#define MEMTYPE_DONTUSE 0 -#define MEMTYPE_PROM 1 -#define MEMTYPE_FREE 2 - static inline int memtype_classify_arcs (union linux_memtypes type) { switch (type.arcs) { case arcs_fcontig: case arcs_free: - return MEMTYPE_FREE; + return BOOT_MEM_RAM; case arcs_atmp: - return MEMTYPE_PROM; + return BOOT_MEM_ROM_DATA; case arcs_eblock: case arcs_rvpage: case arcs_bmem: case arcs_prog: case arcs_aperm: - return MEMTYPE_DONTUSE; + return BOOT_MEM_RESERVED; default: BUG(); } @@ -83,15 +77,15 @@ switch (type.arc) { case arc_free: case arc_fcontig: - return MEMTYPE_FREE; + return BOOT_MEM_RAM; case arc_atmp: - return MEMTYPE_PROM; + return BOOT_MEM_ROM_DATA; case arc_eblock: case arc_rvpage: case arc_bmem: case arc_prog: case arc_aperm: - return MEMTYPE_DONTUSE; + return BOOT_MEM_RESERVED; default: BUG(); } @@ -106,50 +100,13 @@ return memtype_classify_arc(type); } -static inline unsigned long find_max_low_pfn(void) -{ - struct prom_pmemblock *p, *highest; - unsigned long pfn; - - p = pblocks; - highest = 0; - while (p->size != 0) { - if (!highest || p->base > highest->base) - highest = p; - p++; - } - - pfn = (highest->base + highest->size) >> PAGE_SHIFT; -#ifdef DEBUG - prom_printf("find_max_low_pfn: 0x%lx pfns.\n", pfn); -#endif - return pfn; -} - -static inline struct prom_pmemblock *find_largest_memblock(void) -{ - struct prom_pmemblock *p, *largest; - - p = pblocks; - largest = 0; - while (p->size != 0) { - if (!largest || p->size > largest->size) - largest = p; - p++; - } - - return largest; -} - void __init prom_meminit(void) { - struct prom_pmemblock *largest; - unsigned long bootmap_size; struct linux_mdesc *p; - int totram; - int i = 0; #ifdef DEBUG + int i = 0; + prom_printf("ARCS MEMORY DESCRIPTOR dump:\n"); p = ArcGetMemoryDescriptor(PROM_NULL_MDESC); while(p) { @@ -160,77 +117,37 @@ } #endif - totram = 0; - i = 0; p = PROM_NULL_MDESC; while ((p = ArcGetMemoryDescriptor(p))) { - pblocks[i].type = prom_memtype_classify(p->type); - pblocks[i].base = p->base << PAGE_SHIFT; - pblocks[i].size = p->pages << PAGE_SHIFT; - - switch (pblocks[i].type) { - case MEMTYPE_FREE: - totram += pblocks[i].size; -#ifdef DEBUG - prom_printf("free_chunk[%d]: base=%08lx size=%x\n", - i, pblocks[i].base, - pblocks[i].size); -#endif - i++; - break; - case MEMTYPE_PROM: -#ifdef DEBUG - prom_printf("prom_chunk[%d]: base=%08lx size=%x\n", - i, pblocks[i].base, - pblocks[i].size); -#endif - i++; - break; - default: - break; - } - } - pblocks[i].size = 0; - - max_low_pfn = find_max_low_pfn(); - - largest = find_largest_memblock(); - bootmap_size = init_bootmem(largest->base >> PAGE_SHIFT, max_low_pfn); + unsigned long base, size; + long type; - for (i = 0; pblocks[i].size; i++) - if (pblocks[i].type == MEMTYPE_FREE) - free_bootmem(pblocks[i].base, pblocks[i].size); + base = __pa(p->base << PAGE_SHIFT); /* Fix up from KSEG0 */ + size = p->pages << PAGE_SHIFT; + type = prom_memtype_classify(p->type); - /* This test is simpleminded. It will fail if the bootmem bitmap - falls into multiple adjacent ARC memory areas. */ - if (bootmap_size > largest->size) { - prom_printf("CRITIAL: overwriting PROM data.\n"); - BUG(); + add_memory_region(base, pages, type); } - - /* Reserve the memory bootmap itself */ - reserve_bootmem(largest->base, bootmap_size); - - printk("PROMLIB: Total free ram %dK / %dMB.\n", - totram >> 10, totram >> 20); } void __init prom_free_prom_memory (void) { + int i; struct prom_pmemblock *p; unsigned long freed = 0; unsigned long addr; - for (p = pblocks; p->size != 0; p++) { - if (p->type != MEMTYPE_PROM) + for (i = 0; i < boot_mem_map.nr_map; i++) { + if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) continue; - addr = PAGE_OFFSET + p->base; - while (addr < p->base + p->size) { - ClearPageReserved(mem_map + MAP_NR(addr)); - set_page_count(mem_map + MAP_NR(addr), 1); - free_page(addr); + addr = boot_mem_map.map[i].addr; + while (addr < boot_mem_map.map[i].addr + + boot_mem_map.map[i].size) { + ClearPageReserved(mem_map + MAP_NR(__va(addr))); + set_page_count(mem_map + MAP_NR(__va(addr)), 1); + free_page(__va(addr)); addr += PAGE_SIZE; freed += PAGE_SIZE; } diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/baget/prom/init.c linux-mips-2.4.0-test5-20000731/arch/mips/baget/prom/init.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/baget/prom/init.c Tue Mar 28 04:26:02 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/baget/prom/init.c Sun Aug 13 20:24:28 2000 @@ -8,7 +8,7 @@ #include #include -char arcs_cmdline[CL_SIZE]; +char arcs_cmdline[COMMAND_LINE_SIZE]; int __init prom_init(unsigned int mem_upper) { @@ -17,10 +17,6 @@ mips_machtype = MACH_UNKNOWN; arcs_cmdline[0] = 0; return 0; -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ } void prom_free_prom_memory (void) diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/ddb5074/prom.c linux-mips-2.4.0-test5-20000731/arch/mips/ddb5074/prom.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/ddb5074/prom.c Thu May 11 04:26:44 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/ddb5074/prom.c Sun Aug 13 20:24:58 2000 @@ -15,18 +15,11 @@ #include -char arcs_cmdline[CL_SIZE]; - -extern char _end; - -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - +char arcs_cmdline[COMMAND_LINE_SIZE]; void __init prom_init(const char *s) { int i = 0; - unsigned long mem_size, free_start, free_end, start_pfn, bootmap_size; // _serinit(); @@ -37,24 +30,9 @@ mips_machgroup = MACH_GROUP_NEC_DDB; mips_machtype = MACH_NEC_DDB5074; - /* 64 MB non-upgradable */ - mem_size = 64 << 20; - - free_start = PHYSADDR(PFN_ALIGN(&_end)); - free_end = mem_size; - start_pfn = PFN_UP((unsigned long)&_end); - /* Register all the contiguous memory with the bootmem allocator - and free it. Be careful about the bootmem freemap. */ - bootmap_size = init_bootmem(start_pfn, mem_size >> PAGE_SHIFT); - - /* Free the entire available memory after the _end symbol. */ - free_start += bootmap_size; - free_bootmem(free_start, free_end-free_start); -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ + /* 64 MB non-upgradable */ + add_memory_region(0, 64 << 20, BOOT_MEM_RAM); } void __init prom_free_prom_memory(void) diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/ddb5074/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/ddb5074/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/ddb5074/setup.c Wed Jun 21 04:26:38 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/ddb5074/setup.c Sun Aug 13 18:40:51 2000 @@ -118,11 +118,6 @@ panic_timeout = 180; } -int __init page_is_ram(unsigned long pagenr) -{ - return 1; -} - #define USE_NILE4_SERIAL 0 diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/prom/cmdline.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/prom/cmdline.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/prom/cmdline.c Tue Mar 28 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/prom/cmdline.c Sun Aug 13 16:54:47 2000 @@ -19,7 +19,7 @@ extern int (*prom_printf)(char *, ...); #endif -char arcs_cmdline[CL_SIZE]; +char arcs_cmdline[COMMAND_LINE_SIZE]; void __init prom_init_cmdline(int argc, char **argv, unsigned long magic) { diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/prom/memory.c linux-mips-2.4.0-test5-20000731/arch/mips/dec/prom/memory.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/dec/prom/memory.c Mon Jul 10 04:26:02 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/dec/prom/memory.c Sun Aug 13 20:49:47 2000 @@ -2,6 +2,7 @@ * memory.c: memory initialisation code. * * Copyright (C) 1998 Harald Koerfgen, Frieder Streffer and Paul M. Antoine + * Copyright (C) 2000 Maciej W. Rozycki * * $Id: memory.c,v 1.3 1999/10/09 00:00:58 ralf Exp $ */ @@ -14,6 +15,8 @@ #include #include +#include + #include #include "prom.h" @@ -33,11 +36,6 @@ volatile unsigned long mem_err = 0; /* So we know an error occured */ -extern char _end; - -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - /* * Probe memory in 4MB chunks, waiting for an error to tell us we've fallen * off the end of real memory. Only suitable for the 2100/3100's (PMAX). @@ -45,7 +43,7 @@ #define CHUNK_SIZE 0x400000 -unsigned long __init pmax_get_memory_size(void) +static void __init pmax_setup_memory_region(void) { volatile unsigned char *memory_page, dummy; char old_handler[0x80]; @@ -66,17 +64,19 @@ dummy = *memory_page; } memcpy((void *)(KSEG0 + 0x80), &old_handler, 0x80); - return (unsigned long)memory_page - KSEG1 - CHUNK_SIZE; + + add_memory_region(0, (unsigned long)memory_page - KSEG1 - CHUNK_SIZE, + BOOT_MEM_RAM); } /* * Use the REX prom calls to get hold of the memory bitmap, and thence * determine memory size. */ -unsigned long __init rex_get_memory_size(void) +static void __init rex_setup_memory_region(void) { int i, bitmap_size; - unsigned long mem_size = 0; + unsigned long mem_start = 0, mem_size = 0; memmap *bm; /* some free 64k */ @@ -88,40 +88,24 @@ /* FIXME: very simplistically only add full sets of pages */ if (bm->bitmap[i] == 0xff) mem_size += (8 * bm->pagesize); + else if (!mem_size) + mem_start += (8 * bm->pagesize); + else { + add_memory_region(mem_start, mem_size, BOOT_MEM_RAM); + mem_start += mem_size + (8 * bm->pagesize); + mem_size = 0; + } } - - return (mem_size); + if (mem_size) + add_memory_region(mem_start, mem_size, BOOT_MEM_RAM); } void __init prom_meminit(unsigned int magic) { - unsigned long free_start, free_end, start_pfn, bootmap_size; - unsigned long mem_size = 0; - if (magic != REX_PROM_MAGIC) - mem_size = pmax_get_memory_size(); + pmax_setup_memory_region(); else - mem_size = rex_get_memory_size(); - - free_start = PHYSADDR(PFN_ALIGN(&_end)); - free_end = mem_size; - start_pfn = PFN_UP((unsigned long)&_end); - -#ifdef PROM_DEBUG - prom_printf("free_start: 0x%08x\n", free_start); - prom_printf("free_end: 0x%08x\n", free_end); - prom_printf("start_pfn: 0x%08x\n", start_pfn); -#endif - - /* Register all the contiguous memory with the bootmem allocator - and free it. Be careful about the bootmem freemap. */ - bootmap_size = init_bootmem(start_pfn, mem_size >> PAGE_SHIFT); - free_bootmem(free_start + bootmap_size, free_end - free_start - bootmap_size); -} - -int __init page_is_ram(unsigned long pagenr) -{ - return 1; + rex_setup_memory_region(); } void prom_free_prom_memory (void) diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/jazz/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/jazz/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/jazz/setup.c Tue Mar 28 04:26:07 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/jazz/setup.c Sun Aug 13 18:42:14 2000 @@ -80,11 +80,6 @@ i8259_setup_irq(2, &irq2); } -int __init page_is_ram(unsigned long pagenr) -{ - return 1; -} - void __init jazz_setup(void) { add_wired_entry (0x02000017, 0x03c00017, 0xe0000000, PM_64K); diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/kernel/Makefile linux-mips-2.4.0-test5-20000731/arch/mips/kernel/Makefile --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/kernel/Makefile Tue Jul 11 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/kernel/Makefile Sun Aug 13 12:23:32 2000 @@ -6,8 +6,10 @@ # unless it's something special (ie not a .c file). # +.S.s: + $(CPP) $(AFLAGS) $< -o $*.o .S.o: - $(CC) $(CFLAGS) -c $< -o $*.o + $(CC) $(AFLAGS) -c $< -o $*.o all: kernel.o head.o init_task.o EXTRA_ASFLAGS = -mips3 -mcpu=r4000 diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/kernel/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/kernel/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/kernel/setup.c Tue Jul 11 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/kernel/setup.c Sun Aug 13 20:48:28 2000 @@ -6,6 +6,7 @@ * Copyright (C) 1995 Linus Torvalds * Copyright (C) 1995, 1996, 1997, 1998 Ralf Baechle * Copyright (C) 1996 Stoned Elipot + * Copyright (C) 2000 Maciej W. Rozycki */ #include #include @@ -99,12 +100,14 @@ unsigned long mips_machtype = MACH_UNKNOWN; unsigned long mips_machgroup = MACH_GROUP_UNKNOWN; +struct boot_mem_map boot_mem_map; + unsigned char aux_device_present; -extern int _end; +extern char _ftext, _etext, _fdata, _edata, _end; -static char command_line[CL_SIZE] = { 0, }; - char saved_command_line[CL_SIZE]; -extern char arcs_cmdline[CL_SIZE]; +static char command_line[COMMAND_LINE_SIZE]; + char saved_command_line[COMMAND_LINE_SIZE]; +extern char arcs_cmdline[COMMAND_LINE_SIZE]; /* * The board specific setup routine sets irq_setup to point to a board @@ -130,6 +133,9 @@ extern asmlinkage void start_kernel(void); extern int prom_init(int, char **, char **, int *); +static struct resource code_resource = { "Kernel code" }; +static struct resource data_resource = { "Kernel data" }; + /* * Probe whether cpu has config register by trying to play with * alternate cache bit and see whether it matters. @@ -251,6 +257,97 @@ panic("Unknown machtype in init_IRQ"); } +void __init add_memory_region(unsigned long start, unsigned long size, + long type) +{ + int x = boot_mem_map.nr_map; + + if (x == BOOT_MEM_MAP_MAX) { + printk("Ooops! Too many entries in the memory map!\n"); + return; + } + + boot_mem_map.map[x].addr = start; + boot_mem_map.map[x].size = size; + boot_mem_map.map[x].type = type; + boot_mem_map.nr_map++; +} + +static void __init print_memory_map(void) +{ + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + printk(" memory: %08lx @ %08lx ", + boot_mem_map.map[i].size, boot_mem_map.map[i].addr); + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + printk("(usable)\n"); + break; + case BOOT_MEM_ROM_DATA: + printk("(ROM data)\n"); + break; + case BOOT_MEM_RESERVED: + printk("(reserved)\n"); + break; + default: + printk("type %lu\n", boot_mem_map.map[i].type); + break; + } + } +} + +static inline void parse_mem_cmdline(void) +{ + char c = ' ', *to = command_line, *from = saved_command_line; + unsigned long start_at, mem_size; + int len = 0; + int usermem = 0; + + printk("Determined physical RAM map:\n"); + print_memory_map(); + + for (;;) { + /* + * "mem=XXX[kKmM]" defines a memory region from + * 0 to , overriding the determined size. + * "mem=XXX[KkmM]@YYY[KkmM]" defines a memory region from + * to +, overriding the determined size. + */ + if (c == ' ' && !memcmp(from, "mem=", 4)) { + if (to != command_line) + to--; + /* + * If a user specifies memory size, we + * blow away any automatically generated + * size. + */ + if (usermem == 0) { + boot_mem_map.nr_map = 0; + usermem = 1; + } + mem_size = memparse(from + 4, &from); + if (*from == '@') + start_at = memparse(from + 1, &from); + else + start_at = 0; + add_memory_region(start_at, mem_size, BOOT_MEM_RAM); + } + c = *(from++); + if (!c) + break; + if (COMMAND_LINE_SIZE <= ++len) + break; + *(to++) = c; + } + *to = '\0'; + + if (usermem) { + printk("User-defined physical RAM map:\n"); + print_memory_map(); + } +} + void __init setup_arch(char **cmdline_p) { void baget_setup(void); @@ -263,6 +360,10 @@ void ddb_setup(void); void orion_setup(void); + unsigned long bootmap_size; + unsigned long start_pfn, max_pfn; + int i; + /* Save defaults for configuration-dependent routines. */ irq_setup = default_irq_setup; @@ -327,12 +428,88 @@ panic("Unsupported architecture"); } - strncpy (command_line, arcs_cmdline, CL_SIZE); - memcpy(saved_command_line, command_line, CL_SIZE); - saved_command_line[CL_SIZE-1] = '\0'; - + strncpy(command_line, arcs_cmdline, sizeof command_line); + command_line[sizeof command_line - 1] = 0; + strcpy(saved_command_line, command_line); *cmdline_p = command_line; + parse_mem_cmdline(); + +#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) +#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) +#define PFN_PHYS(x) ((x) << PAGE_SHIFT) + + /* + * Partially used pages are not usable - thus + * we are rounding upwards. + */ + start_pfn = PFN_UP(__pa(&_end)); + + /* Find the highest page frame number we have available. */ + max_pfn = 0; + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long start, end; + + if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + continue; + + start = PFN_UP(boot_mem_map.map[i].addr); + end = PFN_DOWN(boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + + if (start >= end) + continue; + if (end > max_pfn) + max_pfn = end; + } + + /* Initialize the boot-time allocator. */ + bootmap_size = init_bootmem(start_pfn, max_pfn); + + /* + * Register fully available low RAM pages with the bootmem allocator. + */ + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long curr_pfn, last_pfn, size; + + /* + * Reserve usable memory. + */ + if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + continue; + + /* + * We are rounding up the start address of usable memory: + */ + curr_pfn = PFN_UP(boot_mem_map.map[i].addr); + if (curr_pfn >= max_pfn) + continue; + if (curr_pfn < start_pfn) + curr_pfn = start_pfn; + + /* + * ... and at the end of the usable range downwards: + */ + last_pfn = PFN_DOWN(boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + + if (last_pfn > max_pfn) + last_pfn = max_pfn; + + /* + * ... finally, did all the rounding and playing + * around just make the area go away? + */ + if (last_pfn <= curr_pfn) + continue; + + size = last_pfn - curr_pfn; + free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size)); + } + + /* Reserve the bootmap memory. */ + reserve_bootmem(PFN_PHYS(start_pfn), bootmap_size); + #ifdef CONFIG_BLK_DEV_INITRD #error "Fixme, I'm broken." tmp = (((unsigned long)&_end + PAGE_SIZE-1) & PAGE_MASK) - 8; @@ -354,6 +531,41 @@ #endif paging_init(); + + code_resource.start = virt_to_bus(&_ftext); + code_resource.end = virt_to_bus(&_etext) - 1; + data_resource.start = virt_to_bus(&_fdata); + data_resource.end = virt_to_bus(&_edata) - 1; + + /* + * Request address space for all standard RAM. + */ + for (i = 0; i < boot_mem_map.nr_map; i++) { + struct resource *res; + + res = alloc_bootmem(sizeof(struct resource)); + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + case BOOT_MEM_ROM_DATA: + res->name = "System RAM"; + break; + case BOOT_MEM_RESERVED: + default: + res->name = "reserved"; + } + res->start = boot_mem_map.map[i].addr; + res->end = res->start + boot_mem_map.map[i].size - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + request_resource(&iomem_resource, res); + + /* + * We dont't know which RAM region contains kernel data, + * so we try it repeatedly and let the resource manager + * test it. + */ + request_resource(res, &code_resource); + request_resource(res, &data_resource); + } } void r3081_wait(void) diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/mm/init.c linux-mips-2.4.0-test5-20000731/arch/mips/mm/init.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/mm/init.c Mon Jul 3 04:25:56 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/mm/init.c Sun Aug 13 20:25:18 2000 @@ -41,7 +41,6 @@ static unsigned long totalram_pages = 0; -extern void prom_fixup_mem_map(unsigned long start, unsigned long end); extern void prom_free_prom_memory(void); @@ -270,7 +269,30 @@ free_area_init(zones_size); } -extern int page_is_ram(unsigned long pagenr); +#define PFN_UP(x) (((x) + PAGE_SIZE - 1) >> PAGE_SHIFT) +#define PFN_DOWN(x) ((x) >> PAGE_SHIFT) + +static inline int page_is_ram(unsigned long pagenr) +{ + int i; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + unsigned long addr, end; + + if (boot_mem_map.map[i].type != BOOT_MEM_RAM) + /* not usable memory */ + continue; + + addr = PFN_UP(boot_mem_map.map[i].addr); + end = PFN_DOWN(boot_mem_map.map[i].addr + + boot_mem_map.map[i].size); + + if (pagenr >= addr && pagenr < end) + return 1; + } + + return 0; +} void __init mem_init(void) { diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/orion/misc.c linux-mips-2.4.0-test5-20000731/arch/mips/orion/misc.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/orion/misc.c Tue Jul 11 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/orion/misc.c Thu Jan 1 00:00:00 1970 @@ -1,102 +0,0 @@ -/* - * Catch-all for Orion-specify code that doesn't fit easily elsewhere. - * -- Cort - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_BLK_DEV_RAM -#include -#endif -#include -#ifdef CONFIG_RTC -#include -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -char arcs_cmdline[CL_SIZE] = {0, }; -extern int _end; - -static unsigned char orion_rtc_read_data(unsigned long addr) -{ - return 0; -} - -static void orion_rtc_write_data(unsigned char data, unsigned long addr) -{ -} - -static int orion_rtc_bcd_mode(void) -{ - return 0; -} - -struct rtc_ops orion_rtc_ops = { - &orion_rtc_read_data, - &orion_rtc_write_data, - &orion_rtc_bcd_mode -}; - -extern void InitCIB(void); -extern void InitQpic(void); -extern void InitCupid(void); - -void __init orion_setup(void) -{ - InitCIB(); - InitQpic(); - InitCupid(); -} - -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - - - -int orion_sysinit(void) -{ - unsigned long mem_size, free_start, free_end, start_pfn, bootmap_size; - - mips_machgroup = MACH_GROUP_ORION; - /* 64 MB non-upgradable */ - mem_size = 32 << 20; - - free_start = PHYSADDR(PFN_ALIGN(&_end)); - free_end = mem_size; - start_pfn = PFN_UP((unsigned long)&_end); - - /* Register all the contiguous memory with the bootmem allocator - and free it. Be careful about the bootmem freemap. */ - bootmap_size = init_bootmem(start_pfn, mem_size >> PAGE_SHIFT); - - /* Free the entire available memory after the _end symbol. */ - free_start += bootmap_size; - free_bootmem(free_start, free_end-free_start); -} diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/orion/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/orion/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/orion/setup.c Tue Jul 11 04:26:06 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/orion/setup.c Sun Aug 13 18:57:53 2000 @@ -42,8 +42,7 @@ #include #include -char arcs_cmdline[CL_SIZE] = { "console=ttyS0,19200" }; -extern int _end; +char arcs_cmdline[COMMAND_LINE_SIZE] = { "console=ttyS0,19200" }; static unsigned char orion_rtc_read_data(unsigned long addr) { @@ -83,45 +82,18 @@ InitCupid(); } -#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) -#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) - -unsigned long mem_size; int __init prom_init(int a, char **b, char **c, int *d) { - unsigned long free_start, free_end, start_pfn, bootmap_size; extern unsigned long orion_initrd_start[], orion_initrd_size; mips_machgroup = MACH_GROUP_ORION; + /* 64 MB non-upgradable */ - mem_size = 64 << 20; - - free_start = PHYSADDR(PFN_ALIGN(&_end)); - free_end = mem_size; - start_pfn = PFN_UP((unsigned long)&_end); - - /* Register all the contiguous memory with the bootmem allocator - and free it. Be careful about the bootmem freemap. */ - bootmap_size = init_bootmem(start_pfn, mem_size >> PAGE_SHIFT); - - /* Free the entire available memory after the _end symbol. */ - free_start += bootmap_size; - free_bootmem(free_start, free_end-free_start); - - initrd_start = (ulong)orion_initrd_start; - initrd_end = (ulong)orion_initrd_start + (ulong)orion_initrd_size; - initrd_below_start_ok = 1; + add_memory_region(0, 64 << 20, BOOT_MEM_RAM); return 0; } void prom_free_prom_memory (void) { -} - -int page_is_ram(unsigned long pagenr) -{ - if ( pagenr < (mem_size >> PAGE_SHIFT) ) - return 1; - return 0; } diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/sgi/kernel/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/sgi/kernel/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/sgi/kernel/setup.c Mon Jul 24 04:26:01 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/sgi/kernel/setup.c Sun Aug 13 18:48:39 2000 @@ -128,15 +128,6 @@ #endif } -int __init page_is_ram(unsigned long pagenr) -{ - if (pagenr < MAP_NR(PAGE_OFFSET + 0x2000UL)) - return 1; - if (pagenr > MAP_NR(PAGE_OFFSET + 0x08002000)) - return 1; - return 0; -} - void (*board_time_init)(struct irqaction *irq); static unsigned long dosample(volatile unsigned char *tcwp, diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/arch/mips/sni/setup.c linux-mips-2.4.0-test5-20000731/arch/mips/sni/setup.c --- linux-mips-2.4.0-test5-20000731.macro/arch/mips/sni/setup.c Wed Jun 21 04:26:41 2000 +++ linux-mips-2.4.0-test5-20000731/arch/mips/sni/setup.c Sun Aug 13 18:48:47 2000 @@ -101,11 +101,6 @@ printk("%s.\n", boardtype); } -int __init page_is_ram(unsigned long pagenr) -{ - return 1; -} - void __init sni_rm200_pci_setup(void) { #if 0 /* XXX Tag me deeper */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/bootinfo.h linux-mips-2.4.0-test5-20000731/include/asm-mips/bootinfo.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/bootinfo.h Tue Jul 11 04:26:27 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/bootinfo.h Sun Aug 13 20:04:00 2000 @@ -1,4 +1,4 @@ -/* $Id: bootinfo.h,v 1.11 2000/03/06 11:14:32 raiko Exp $ +/* $Id: bootinfo.h,v 2.11 2000/03/06 11:14:32 raiko Exp $ * * bootinfo.h -- Definition of the Linux/MIPS boot information structure * @@ -155,9 +155,14 @@ "R6000A", "R8000", "R10000", "R4300", "R4650", "R4700", "R5000", \ "R5000A", "R4640", "Nevada" } -#define CL_SIZE (80) +#define COMMAND_LINE_SIZE 256 -#ifndef _LANGUAGE_ASSEMBLY +#define BOOT_MEM_MAP_MAX 32 +#define BOOT_MEM_RAM 1 +#define BOOT_MEM_ROM_DATA 2 +#define BOOT_MEM_RESERVED 3 + +#ifndef __ASSEMBLY__ /* * Some machine parameters passed by the bootloaders. @@ -191,6 +196,24 @@ extern unsigned long mips_machgroup; extern unsigned long mips_tlb_entries; -#endif /* _LANGUAGE_ASSEMBLY */ +/* + * A memory map that's built upon what was determined + * or specified on the command line. + */ +struct boot_mem_map { + int nr_map; + struct { + unsigned long addr; /* start of memory segment */ + unsigned long size; /* size of memory segment */ + long type; /* type of memory segment */ + } map[BOOT_MEM_MAP_MAX]; +}; + +extern struct boot_mem_map boot_mem_map; + +extern void add_memory_region(unsigned long start, unsigned long size, + long type); + +#endif /* !__ASSEMBLY__ */ #endif /* __ASM_MIPS_BOOTINFO_H */ diff -u --recursive --new-file linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/sgialib.h linux-mips-2.4.0-test5-20000731/include/asm-mips/sgialib.h --- linux-mips-2.4.0-test5-20000731.macro/include/asm-mips/sgialib.h Tue Mar 28 04:27:20 2000 +++ linux-mips-2.4.0-test5-20000731/include/asm-mips/sgialib.h Sun Aug 13 20:29:14 2000 @@ -30,28 +30,12 @@ /* Generic printf() using ARCS console I/O. */ extern void prom_printf(char *fmt, ...); -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 32 -struct prom_pmemblock { - unsigned long base; /* Within KSEG0. */ - unsigned int size; /* In bytes. */ - unsigned int type; /* free or prom memory */ -}; - -/* Get next memory descriptor after CURR, returns first descriptor - * in chain is CURR is NULL. - */ -extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr); #define PROM_NULL_MDESC ((struct linux_mdesc *) 0) /* Called by prom_init to setup the physical memory pmemblock * array. */ extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); - -/* Returns pointer to PROM physical memory block array. */ -extern struct prom_pmemblock *prom_getpblock_array(void); /* PROM device tree library routines. */ #define PROM_NULL_COMPONENT ((pcomponent *) 0) From owner-linux-mips@oss.sgi.com Mon Aug 14 06:00:55 2000 Received: by oss.sgi.com id ; Mon, 14 Aug 2000 06:00:46 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:2068 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 14 Aug 2000 06:00:18 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id GAA08145 for ; Mon, 14 Aug 2000 06:06:25 -0700 (PDT) mail_from (wq3d@tsaa.com) From: wq3d@tsaa.com Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id FAA89352 for ; Mon, 14 Aug 2000 05:59:46 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id FAA10915 for ; Mon, 14 Aug 2000 05:58:15 -0700 (PDT) mail_from (wq3d@tsaa.com) Received: from gull.prod.itd.earthlink.net (gull.prod.itd.earthlink.net [207.217.121.85]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id FAA04466 for ; Mon, 14 Aug 2000 05:58:14 -0700 (PDT) mail_from (wq3d@tsaa.com) Received: from fool.com (pool-209-138-62-69.dlls.grid.net [209.138.62.69]) by gull.prod.itd.earthlink.net (8.9.3-EL_1_3/8.9.3) with SMTP id FAA28177 for ; Mon, 14 Aug 2000 05:58:09 -0700 (PDT) To: linux@cthulhu.engr.sgi.com Subject: EStreet Journal Date: Mon, 14 Aug 2000 07:59:00 Message-Id: <815.52979.273421@tsaa.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Free subscription to the E-Street Journal. Designed to introduce savvy investors to specific small cap emerging growth companies. What if you could turn back the clock? What blue chip stock of today do you wish you had purchased and added to your portfolio? It was not that long ago that Microsoft, Dell or Sprint were emerging growth companies. Interesting Company alerts by subscribing to the E-Street Journal Chick this link: http://www.estreetjournal.net/ This message is sent in compliance of the new email bill section 301. Under Bill S1618 TITLE III passed by the 105th US Congress, this message cannot be considered SPAM as long as we include the way to be removed, Paragraph (a)(c) of S.1618, further transmissions to you by the sender of this email may be stopped at no cost to you by replying to hopson_s@hotmail.com From owner-linux-mips@oss.sgi.com Tue Aug 15 06:21:59 2000 Received: by oss.sgi.com id ; Tue, 15 Aug 2000 06:21:50 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:38177 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 15 Aug 2000 06:21:32 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id GAA04703 for ; Tue, 15 Aug 2000 06:27:40 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id GAA46414 for ; Tue, 15 Aug 2000 06:21:12 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from waterloo.algor.co.uk (waterloo.algor.co.uk [193.117.190.13]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id GAA01403 for ; Tue, 15 Aug 2000 06:21:03 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from kenton.algor.co.uk (root@kenton.algor.co.uk [62.254.210.199]) by waterloo.algor.co.uk (8.8.5/8.8.8) with ESMTP id OAA19202; Tue, 15 Aug 2000 14:19:27 +0100 (BST) Received: from mudchute.algor.co.uk (dom@mudchute.algor.co.uk [62.254.210.251]) by kenton.algor.co.uk (8.9.3/8.8.8) with ESMTP id MAA07956; Tue, 15 Aug 2000 12:13:10 +0100 (GMT/BST) Received: (from dom@localhost) by mudchute.algor.co.uk (8.8.5/8.8.5) id LAA11816; Tue, 15 Aug 2000 11:52:20 +0100 (BST) Date: Tue, 15 Aug 2000 11:52:20 +0100 (BST) Message-Id: <200008151052.LAA11816@mudchute.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Alorithmics Contacts Subject: Algorithmics Ltd of England have moved X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing First, apologies to the many of you who aren't interested. I have no practical way of cleaning my list of 1000+ email contacts any further. I'll keep this brief, and if you have no interest in the new location of Algorithmics Ltd of England, please delete it now. New address: The Fruit Farm, Ely Road, Chittering, CAMBS CB5 9PH, ENGLAND New phone: +44 1223 706200 New fax: +44 1223 706250 No change to email addresses or internet names (though our IP addresses have changed, but only the very techy will notice). We have redirects on our old address and phone numbers, but propagate this change as quickly as you can. -- Dominic Sweetman Algorithmics Ltd The Fruit Farm, Ely Road, Chittering, CAMBS CB5 9PH, ENGLAND phone: +44 1223 706200 / fax: +44 1223 706250 / http://www.algor.co.uk From owner-linux-mips@oss.sgi.com Wed Aug 16 03:03:49 2000 Received: by oss.sgi.com id ; Wed, 16 Aug 2000 03:03:40 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:26935 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 16 Aug 2000 03:03:31 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id CAA29871 for ; Wed, 16 Aug 2000 02:55:56 -0700 (PDT) mail_from (freevacation@fasttrec.com) From: freevacation@fasttrec.com Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id DAA69094; Wed, 16 Aug 2000 03:03:15 -0700 (PDT) mail_from (freevacation@fasttrec.com) Received: from www.fasttrec.com (sdn-ar-007mnminnP193.dialsprint.net [158.252.98.105]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id DAA09303; Wed, 16 Aug 2000 03:03:13 -0700 (PDT) mail_from (freevacation@fasttrec.com) Subject: ADV: Time to Travel and Build Wealth Date: Wed, 16 Aug 2000 01:27:21 Message-Id: <490.48563.852689@www.fasttrec.com> To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello there! To be removed from our mailing list visit: http://www.supersitescentral.com/travel/remove.html GET YOUR FREE VACATION VOUCHER WHEN VISITING OUR WEB SITE! Please Click Here http://www.supersitescentral.com/travel For FREE Information! ONLY 14 ASSOCIATES NEEDED! We will train hard working and ethical candidates. HUGE COMPENSATION PLAN AVAILABLE! This is your chance to get in on the ground floor of the Multi-Billion-Dollar Home Based Business Revolution. Receive a COMPLIMENTARY Weekend GetAway when visiting our site. Please Click Here http://www.supersitescentral.com/travel For FREE Information! From owner-linux-mips@oss.sgi.com Sun Aug 20 20:12:36 2000 Received: by oss.sgi.com id ; Sun, 20 Aug 2000 20:12:26 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:32551 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 20 Aug 2000 20:12:08 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id UAA01495 for ; Sun, 20 Aug 2000 20:18:23 -0700 (PDT) mail_from (nexttimearound@thirdage.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id UAA91520 for ; Sun, 20 Aug 2000 20:11:52 -0700 (PDT) mail_from (nexttimearound@thirdage.com) Received: from PCW.fit.gtw.bit.qld.edu.au (pcw.fit.gtw.bit.qld.edu.au [203.30.113.229]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id UAA02657 for ; Sun, 20 Aug 2000 20:11:50 -0700 (PDT) mail_from (nexttimearound@thirdage.com) Received: from hotmail.com (pool0450.cvx5-bradley.dialup.earthlink.net [209.178.153.195]) by PCW.fit.gtw.bit.qld.edu.au (8.8.5/8.8.5) with SMTP id NAA02499; Mon, 21 Aug 2000 13:17:55 +1000 To: outsidepluto@xmail.com Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7BIT X-Mailer: Mozilla 4.51 [en] (Win98; I) From: preservethis@yachtemail.com Subject: *Find Out ANYTHING About ANYONE!! Message-Id: Date: Sun, 20 Aug 2000 20:11:37 -0800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing ************************************************************************************************************ THIS NEW AMAZING SOFTWARE TOOL HELPS YOU FIND OUT ALMOST ANYTHING ABOUT ANYONE - CLICK ON URL BELOW TO VISIT OUR WEBSITE http://howdoes.freehosting.net ********************************************************** Find out almost EVERYTHING you ever wanted to know about: Your friends Your family Your enemies Your employees Yourself - Is Someone Using Your Identity? Even your boss! DID YOU KNOW you can search for ANYONE, ANYTIME, ANYWHERE, right on the Internet.. This mammoth COLLECTION of Internet investigative tools & research sites will provide you with NEARLY 400 GIGANTIC SEARCH RESOURCES to locate information on: People you trust Screen new tenants or roommates Housekeepers Current or past employment People you work with License plate number with name and address Unlisted phone numbers Long lost friends A new or old LOVE INTEREST You can even VERIFY your own CREDIT REPORTS so you can correct WRONG information These are only a few things you can do, There is no limit to the power of this information tool!! CLICK ON URL BELOW TO VISIT OUR WEBSITE http://howdoes.freehosting.net NOTE: This program only wrks with Intel based PCs. No WebTV or Mac support at this time. ****************************************************** If you would like to be removed from our mailing list simply Click Here mailto:troy@Hoxton-London.co.uk?subject=Remove From owner-linux-mips@oss.sgi.com Mon Aug 21 20:56:25 2000 Received: by oss.sgi.com id ; Mon, 21 Aug 2000 20:56:15 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:2845 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 21 Aug 2000 20:55:54 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id UAA26755 for ; Mon, 21 Aug 2000 20:48:11 -0700 (PDT) mail_from (adi@mr-happy.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id UAA44868 for ; Mon, 21 Aug 2000 20:55:31 -0700 (PDT) mail_from (adi@mr-happy.com) Received: from brainguy.tc.mtu.edu (brainguy.tc.mtu.edu [141.219.5.85]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id UAA09725 for ; Mon, 21 Aug 2000 20:55:29 -0700 (PDT) mail_from (adi@mr-happy.com) Received: from crow.mr-happy.com (crow.mr-happy.com [172.19.3.81]) by brainguy.tc.mtu.edu (Postfix) with ESMTP id D811C1A196; Mon, 21 Aug 2000 23:55:22 -0400 (EDT) Received: by crow.mr-happy.com (Postfix, from userid 22448) id CEF418D58; Mon, 21 Aug 2000 23:55:20 -0400 (EDT) Date: Mon, 21 Aug 2000 22:55:20 -0500 From: Andy Isaacson To: James Simmons , i15@ornl.gov Cc: linux-fbdev@vuser.vu.union.edu, linux@cthulhu.engr.sgi.com Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and evidence..:-) Message-ID: <20000821225520.A25330@mr-happy.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.4i In-Reply-To: ; from jsimmons@acsu.buffalo.edu on Wed, Aug 09, 2000 at 07:17:02PM -0400 X-PGP-Fingerprint: 48 01 21 E2 D4 E4 68 D1 B8 DF 39 B2 AF A3 16 B9 X-PGP-Key-URL: http://web.mr-happy.com/~adi/pgp.txt Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Aug 09, 2000 at 07:17:02PM -0400, James Simmons wrote: > > I would also like to ask, if SGI is likely to make the hardware specs OSS > > (for cobalt etc.), so that those with the skill (this is not my forte, but > > I will try...), can stabilise this otherwise competent port. > > Nope. SGI no longer supports Visual Workstations with linux. I don't even > know if they support Visual Workstatiosn period. It would be nice if they > did release the specs anyways :-) SGI never did support the Visual Workstation 540 and 320 in Linux. There did exist some code, but it was never a formal SGI product. On Wed, Aug 09, 2000 at 07:28:07PM -0400, philloc@tigger.ccs.ornl.gov wrote: > Anyone from SGI care to comment on why SGI has not released the > specs to reasonable attention, since they are unable to help port? I don't speak for SGI, but in the past I think they said that the specs basically do not exist in a releasable form. Basically, the hardware developers and software developers worked in the same hallway and the development was of the form "hey Joe, how do I program the zapbot to do foobaz?" OK, maybe that's not quite accurate, but the result is that there are no plans to release specs. -andy -- Andy Isaacson http://web.mr-happy.com/~adi/ I want to buy your broken laptop! http://web.mr-happy.com/~adi/laptop.html From owner-linux-mips@oss.sgi.com Tue Aug 22 04:22:48 2000 Received: by oss.sgi.com id ; Tue, 22 Aug 2000 04:22:38 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:54276 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Tue, 22 Aug 2000 04:22:20 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 8BD7E7DD; Tue, 22 Aug 2000 13:25:38 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 0A5AC8FF5; Tue, 22 Aug 2000 13:21:48 +0200 (CEST) Date: Tue, 22 Aug 2000 13:21:47 +0200 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: VCE exception Message-ID: <20000822132147.D6784@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, i am still seeing a lot of VCE exceptions on my R4k Decstations and on the SGI Indigo2 - On my Decstation 5000/260 there are around 300 VCEI exceptions a second which is VERY much. I am now trying to understand the cause of these Exceptions. As i understand from the Books a VCE is taken when on an access to the Second level cache its detected that there is already a copy of this data in the Primary Cache but its accessed through a different P-Cache line as its Virtually indexed and the same data is accessed through a different Virtual address. As i understand this correct isnt it normal to have this kind of exception (for instructions) as we are dealing with shared librarys which might be mapped to different virtual addresses for each process. The books now say - We should delete/invalidate the old location on the Primary cache and update the PIdx in the Second level cache. [builder@resume builder]$ uptime 11:07am up 20:51, 1 user, load average: 1.01, 1.10, 1.10 [builder@resume builder]$ cat /proc/cpuinfo cpu : MIPS cpu model : R4000SC V6.0 system type : SGI Indy BogoMIPS : 124.93 byteorder : big endian unaligned accesses : 97 wait instruction : no microsecond timers : no extra interrupt vector : no hardware watchpoint : yes VCED exceptions : 17367628 VCEI exceptions : 10243032 This is an uptime of 75060 seconds - 136 VCEI/s and 231 VCED/s builder@repeat:~$ uptime cat 7:59am up 3 days, 19:26, 1 user, load average: 1.17, 1.06, 1.08 builder@repeat:~$ cat /proc/cpuinfo cpu : MIPS cpu model : R4000SC V3.0 system type : Digital DECstation 5000/1xx BogoMIPS : 49.81 byteorder : little endian unaligned accesses : 45 wait instruction : no microsecond timers : yes extra interrupt vector : no hardware watchpoint : yes VCED exceptions : 56724062 VCEI exceptions : 36117905 329160 seconds uptime - 172 VCED/s and 109 VCEI/s Both machines were busy nearly all there uptime compiling debian packages. [flo@reconfig flo]$ cat /proc/cpuinfo cpu : MIPS cpu model : R4400SC V4.0 system type : Digital DECstation 5000/2x0 BogoMIPS : 59.90 byteorder : little endian unaligned accesses : 0 wait instruction : no microsecond timers : yes extra interrupt vector : no hardware watchpoint : yes VCED exceptions : 753186 VCEI exceptions : 1557460 [flo@reconfig flo]$ uptime 6:55pm up 12:04, 2 users, load average: 1.08, 1.06, 1.05 [flo@reconfig flo]$ 43440 Seconds uptime - 35 VCEI/s - 17 VCED/s - On this last machine i have seen >300 VCEI/s second on an mostly idle machine. This last machine was idle for most of the uptime ... Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." From owner-linux-mips@oss.sgi.com Tue Aug 22 08:32:59 2000 Received: by oss.sgi.com id ; Tue, 22 Aug 2000 08:32:49 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:34169 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 22 Aug 2000 08:32:39 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id IAA14762 for ; Tue, 22 Aug 2000 08:25:02 -0700 (PDT) mail_from (jsimmons@acsu.buffalo.edu) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA85401 for ; Tue, 22 Aug 2000 08:32:21 -0700 (PDT) mail_from (jsimmons@acsu.buffalo.edu) Received: from xena.acsu.buffalo.edu (xena.acsu.buffalo.edu [128.205.7.121]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id IAA09760 for ; Tue, 22 Aug 2000 08:32:20 -0700 (PDT) mail_from (jsimmons@acsu.buffalo.edu) Received: (qmail 18878 invoked from network); 22 Aug 2000 15:32:18 -0000 Received: from ubppp233-237.dialin.buffalo.edu (jsimmons@128.205.233.237) by xena.acsu.buffalo.edu with SMTP; 22 Aug 2000 15:32:18 -0000 Date: Tue, 22 Aug 2000 11:43:15 -0400 (EDT) From: James Simmons X-Sender: jsimmons@maxwell.futurevision.com To: Andy Isaacson cc: i15@ornl.gov, linux-fbdev@vuser.vu.union.edu, linux@cthulhu.engr.sgi.com Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and evidence..:-) In-Reply-To: <20000821225520.A25330@mr-happy.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > On Wed, Aug 09, 2000 at 07:28:07PM -0400, philloc@tigger.ccs.ornl.gov wrote: > > Anyone from SGI care to comment on why SGI has not released the > > specs to reasonable attention, since they are unable to help port? > > I don't speak for SGI, but in the past I think they said that the > specs basically do not exist in a releasable form. Basically, the > hardware developers and software developers worked in the same hallway > and the development was of the form "hey Joe, how do I program the > zapbot to do foobaz?" Actually you are right. The lack of docs internally in SGI has caused this problem. This also has had the bad side effect of when they lose a critical employee then no one else has a clue on how it program it. You have to start from scratch. [OT]. This actually happend to M$ as well. One person wrote they entire registery for win95. He left the company and when it came time to port it to win2000 no one understood how it worked. So they had to rewrite it from scratch. From owner-linux-mips@oss.sgi.com Tue Aug 22 08:56:29 2000 Received: by oss.sgi.com id ; Tue, 22 Aug 2000 08:56:19 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:26679 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 22 Aug 2000 08:55:54 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id JAA02807 for ; Tue, 22 Aug 2000 09:02:10 -0700 (PDT) mail_from (shm@cthulhu.engr.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id IAA28242 for ; Tue, 22 Aug 2000 08:55:23 -0700 (PDT) Received: from tantrik.engr.sgi.com (tantrik.engr.sgi.com [130.62.52.189]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA95466; Tue, 22 Aug 2000 08:53:50 -0700 (PDT) mail_from (shm@cthulhu.engr.sgi.com) Received: from localhost (shm@localhost) by tantrik.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA64683; Tue, 22 Aug 2000 08:53:49 -0700 (PDT) Date: Tue, 22 Aug 2000 08:53:49 -0700 From: Shrijeet Mukherjee cc: linux-fbdev@vuser.vu.union.edu, Linux porting team Subject: Re: [linux-fbdev] SGI VW 540, fbdev and pot pourii of faults and evidence..:-) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 22 Aug 2000, James Simmons wrote: JS>> I don't speak for SGI, but in the past I think they said that the JS>> specs basically do not exist in a releasable form. Basically, the JS>> hardware developers and software developers worked in the same hallway JS>> and the development was of the form "hey Joe, how do I program the JS>> zapbot to do foobaz?" JS> JS>Actually you are right. The lack of docs internally in SGI has caused this JS>problem. This also has had the bad side effect of when they lose a JS>critical employee then no one else has a clue on how it program it. You JS>have to start from scratch. JS> Well as I have tried to explain in the past the situation is not as cut and dry as all that. For most hardware systems, well written driver code is a good place to start. (in fact al of the internal port to linux for the 320 was done without formal docs, or the engg's to talk to) The real problem is that the 320 gfx family uses a SGI style high-performance which is different from the AGP style approach that the other guys use. Porting this to linux .. or more than knowing how the hardware works .. since we need to port a very complicated mechanism, for which linux may not have obvious and ready replacements. On top of that .. there are potentially Intellectual Property issues with the management style. Thus the concerns with just releasing the specs. Since this is a recurring question, are there people on this list that are personally motivated to try and port this system over ? Std Disclaimer: I am not speaking for SGI .. all opinions expressed here and mine and mine alone. Thanx -- -------------------------------------------------------------------------- Shrijeet Mukherjee, Advanced Graphics, SGI http://reality.sgi.com/shm_engr phone: 650-933-5312 email: shm@sgi.com, shrijeet@hotmail.com -------------------------------------------------------------------------- Where there is a will, there is a way. If a way cannot be found, it is the will that is suspect .. -- shm From owner-linux-mips@oss.sgi.com Tue Aug 22 09:29:19 2000 Received: by oss.sgi.com id ; Tue, 22 Aug 2000 09:29:09 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:34319 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 22 Aug 2000 09:29:00 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id JAA22613 for ; Tue, 22 Aug 2000 09:21:23 -0700 (PDT) mail_from (ehab@aia067.aia.rwth-aachen.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id JAA22893; Tue, 22 Aug 2000 09:28:41 -0700 (PDT) mail_from (ehab@aia067.aia.RWTH-Aachen.DE) Received: from aia067.aia.RWTH-Aachen.DE (aia067.aia.RWTH-Aachen.DE [134.130.140.67]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id JAA01932; Tue, 22 Aug 2000 09:28:37 -0700 (PDT) mail_from (ehab@aia067.aia.RWTH-Aachen.DE) Received: from localhost (localhost [[UNIX: localhost]]) by aia067.aia.RWTH-Aachen.DE (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) id SAA08887; Tue, 22 Aug 2000 18:28:30 +0200 From: Ehab Fares To: Shrijeet Mukherjee Subject: Re: [linux-fbdev] SGI VW 540, fbdev... and other stuff Date: Tue, 22 Aug 2000 17:59:43 +0200 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain Cc: linux-fbdev@vuser.vu.union.edu, Linux porting team References: In-Reply-To: MIME-Version: 1.0 Message-Id: <00082218283000.08755@aia067> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 22 Aug 2000, Shrijeet Mukherjee wrote: > Well as I have tried to explain in the past the situation is not as cut > and dry as all that. For most hardware systems, well written driver code > is a good place to start. (in fact al of the internal port to linux for > the 320 was done without formal docs, or the engg's to talk to) > > The real problem is that the 320 gfx family uses a SGI style > high-performance which is different from the AGP style approach that the > other guys use. Porting this to linux .. or more than knowing how the > hardware works .. since we need to port a very complicated mechanism, for > which linux may not have obvious and ready replacements. > > On top of that .. there are potentially Intellectual Property issues with > the management style. Thus the concerns with just releasing the specs. > > Since this is a recurring question, are there people on this list that are > personally motivated to try and port this system over ? > We are using a 540 system with the top configuration (4 processors, 2GB Ram and the flat panel 1600SW). We are certainly motivated to get linux and the X-Server working poperly. As already posted in this mailing list the X-server is not the only problem. I therefore would suggest to start collecting all the problems that should be solved and look for people interested in working on the port. The problems we have are: 1) new kernels simply wouldn'[t boot the machine. I got the machine working with the 2.2.10 patched kernel. All the four processors are working. 2) We have only 960 MB Ram of the installed 2GB working. 3) strange behaviour of the keyboard. 4) the parallel port is not working. (we haven't tested the rest of the ports) 5) very poor X performance with hangs every now and then which is probably because of the X-Server. Are there other people having similar or other problems and interested in solving them? Is there anyone who have the experience or knowledge of that system (and linux) who can help? I personally would like to help but need some information and details as I'm not a kernel hacker. Ehab. From owner-linux-mips@oss.sgi.com Tue Aug 22 16:55:31 2000 Received: by oss.sgi.com id ; Tue, 22 Aug 2000 16:55:11 -0700 Received: from gateway-490.mvista.com ([63.192.220.206]:25847 "EHLO hermes.mvista.com") by oss.sgi.com with ESMTP id ; Tue, 22 Aug 2000 16:54:56 -0700 Received: from mvista.com (IDENT:ppopov@zeus.mvista.com [10.0.0.112]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id QAA31010 for ; Tue, 22 Aug 2000 16:54:56 -0700 Message-ID: <39A3123A.477D5BFA@mvista.com> Date: Tue, 22 Aug 2000 16:52:26 -0700 From: Pete Popov Organization: Monta Vista Software X-Mailer: Mozilla 4.75 [en] (X11; U; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: indigo2 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Does anyone know where I can get hardware documentation for the Indigo2? I'm interested in the hardware memory map and what's on the board itself, such as ethernet controller, the serial ports, rtc, etc. Thanks, Pete From owner-linux-mips@oss.sgi.com Wed Aug 23 07:05:26 2000 Received: by oss.sgi.com id ; Wed, 23 Aug 2000 07:05:06 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:46451 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 23 Aug 2000 07:04:43 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id GAA14937 for ; Wed, 23 Aug 2000 06:57:07 -0700 (PDT) mail_from (subhashs@bom3.vsnl.net.in) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id HAA78809 for ; Wed, 23 Aug 2000 07:04:12 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA49466 for ; Wed, 23 Aug 2000 07:02:40 -0700 (PDT) mail_from (subhashs@bom3.vsnl.net.in) Received: from bom4.vsnl.net.in (bom4.vsnl.net.in [202.54.4.116]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA01200 for ; Wed, 23 Aug 2000 07:02:37 -0700 (PDT) mail_from (subhashs@bom3.vsnl.net.in) Received: from vsnl (unknown [203.199.79.72]) by bom4.vsnl.net.in (Postfix) with SMTP id 87EFB2CEA; Wed, 23 Aug 2000 19:31:37 +0500 (GMT+0500) Message-ID: <00a801c00d0b$14ec3680$0664a8c0@vsnl.net.in> Reply-To: "Comfort@vsnl.com" From: "Comfort@vsnl.com" To: Subject: Free Registraion @ WorldAirConditioners.com [ & 17 other Industry Specific Portals ) Date: Wed, 23 Aug 2000 19:32:29 +0530 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_009E_01C00D38.E087CDE0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MIMEOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_009E_01C00D38.E087CDE0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Dear Sir,=20 We are pleased to announce the Soft launch of following 18 = comprehensive industry specific portals on Home & Electronic = Appliances,{Manufacturers, Distributors, Dealers and users of Finished = goods and Raw materials } for Free Registraion.=20 WorldAirCoolers.com WorldAirPurifiers.com = WorldAirConditioners.com =20 WorldCookingSystems.com WorldDishWashers.com = WorldElectricIrons.com=20 WorldElectricFans.com WorldFoodProcessors.com = WorldHeatingAppliances.com =20 WorldMicrowaveOvens.com WorldMusicSystems.com = WorldRefrigerators.com =20 WorldWashingMachines.com WorldWaterPurifiers.com = WorldWaterDispensers.com =20 WorldWaterHeaters.com WorldVacuumCleaners.com = World-Televisions.com =20 We would request you to see the Demostration of Live Launch and = Show Room of Super Tower Fan. This would also help you to decide to = launch and display your products at these forums for global exposure. Show Room : http://www.worldelectricfans.com/product.htm Live Launch : http://www.worldelectricfans.com/launch.htm These portals have been developed for providing following features : a.. Meeting ground for buyers & suppliers of finished goods & raw = materials of home and electronic appliances. b.. Meeting ground for manufacturers, distributors, dealers, CFAs = offering/looking various business/trade opportunities. c.. Meeting ground for employers & employees in home and electronic = appliance industry. d.. Auctions, Bargains Bulk-deals Clubs & tender opportunities. e.. Virtual showrooms for various products. f.. Facilitation centres for customer/visitor. These portals are being advertised & promoted worldwide to ensure = maximum target audience participation, to promote the cause of the = industry in general and its members in particular. You are requested to = visit concerned portals to see their utility for yourself and to = Register your organisation Free for reaping the benefit out of this = unique and great opportunity. =20 Requesting your participation with Regards, * If you feel you have received this message by mistake and do = not wish to receive further emails from WorldAllProducts.com, please = respond to this email by putting "Please Remove" in the subject line,so = that your name can be removed from this list.=20 =20 ------=_NextPart_000_009E_01C00D38.E087CDE0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Dear Sir,

    We are pleased = to announce=20 the Soft launch of  following 18 comprehensive = industry=20 specific portals on Home & Electronic = Appliances,{Manufacturers, Distributors, Dealers and users = of Finished=20 goods and Raw materials } for Free Registraion.

WorldAirCoolers.com &nb=
sp;      WorldAirPurifiers.com =
;     WorldAirConditioners.com            =
    
WorldCookingSystems.com&=
nbsp;   WorldDishWashers.com &=
nbsp;     WorldElectricIrons.com&nb=
sp;
WorldElectricFans.com =
;     WorldFoodProcessors.com&=
nbsp;   WorldHeatingAppliances.co=
m           
WorldMicrowaveOvens.com&=
nbsp;   WorldMusicSystems.com =
;     WorldRefrigerators.com&nb=
sp;           &nbs=
p; 
WorldWashingMachines.com   WorldWaterPurifiers.com&=
nbsp;   WorldWaterDispensers.com            =
  
WorldWaterHeaters.com =
;     WorldVacuumCleaners.com&=
nbsp;   World-Televisions.com
 
    We would  request you to =
see the Demostration of Live Launch and Show Room of  =
Super Tower Fan. This would also help you to decide to launch and =
display your products at these forums for global exposure.

Show Room = :      =20 http://www.= worldelectricfans.com/product.htm

Live Launch :       http://www.w= orldelectricfans.com/launch.htm

 

These portals have been developed for providing following = features=20 :

  • Meeting ground for buyers & suppliers of = finished goods=20 & raw materials of home and electronic appliances.
  • Meeting ground for manufacturers, distributors, = dealers,=20 CFAs offering/looking various business/trade opportunities.
  • Meeting ground for employers & employees in = home and=20 electronic appliance industry.
  • Auctions, Bargains Bulk-deals Clubs & tender=20 opportunities.
  • Virtual showrooms for various products.
  • Facilitation centres for = customer/visitor.

These portals are being advertised & promoted worldwide to ensure = maximum=20 target audience participation, to promote the cause of the industry in = general=20 and its members in particular. You are requested to visit concerned = portals to=20 see their utility for yourself and to Register = your=20 organisation Free=20 for reaping the benefit out of this unique and great = opportunity.

 

Requesting your participation with Regards,

    = * If  = you  = feel you have=20 received this  message by mistake and do  not wish to=20 receive  further emails from WorldAllProducts.com, please = respond to=20 this email by putting "Please=20 Remove" in the subject line,so that your name can be removed = from this=20 list.=20


 

------=_NextPart_000_009E_01C00D38.E087CDE0-- From owner-linux-mips@oss.sgi.com Wed Aug 23 07:51:56 2000 Received: by oss.sgi.com id ; Wed, 23 Aug 2000 07:51:46 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:28431 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Wed, 23 Aug 2000 07:51:27 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 8C12A7F7; Wed, 23 Aug 2000 16:54:51 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 636FB8FF5; Wed, 23 Aug 2000 16:50:52 +0200 (CEST) Date: Wed, 23 Aug 2000 16:50:52 +0200 From: Florian Lohoff To: Pete Popov Cc: "linux-mips@oss.sgi.com" Subject: Re: indigo2 Message-ID: <20000823165051.I2501@paradigm.rfc822.org> References: <39A3123A.477D5BFA@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <39A3123A.477D5BFA@mvista.com>; from ppopov@mvista.com on Tue, Aug 22, 2000 at 04:52:26PM -0700 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Aug 22, 2000 at 04:52:26PM -0700, Pete Popov wrote: > Does anyone know where I can get hardware documentation for the Indigo2? > I'm interested in the hardware memory map and what's on the board > itself, such as ethernet controller, the serial ports, rtc, etc. Most of the stuff from the Indy should be true also. It should also be reconstructable from the Kernel source - AFAIK there is no documentation available for the Indigo2. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." From owner-linux-mips@oss.sgi.com Wed Aug 23 09:25:16 2000 Received: by oss.sgi.com id ; Wed, 23 Aug 2000 09:25:06 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:18716 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 23 Aug 2000 09:24:33 -0700 Received: from ledzep.cray.com (ledzep.americas.sgi.com [137.38.226.97]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id JAA01631 for ; Wed, 23 Aug 2000 09:16:26 -0700 (PDT) mail_from (bcasavan@sgi.com) Received: from daisy-e185.americas.sgi.com (daisy.mw.cray.com [128.162.185.214]) by ledzep.cray.com (SGI-SGI-8.9.3/craymail-smart-nospam1.0) with ESMTP id LAA33067; Wed, 23 Aug 2000 11:21:31 -0500 (CDT) Received: from kzerza.americas.sgi.com (kzerza.americas.sgi.com [128.162.191.33]) by daisy-e185.americas.sgi.com (980427.SGI.8.8.8/SGI-server-1.6) with ESMTP id LAA63247; Wed, 23 Aug 2000 11:21:31 -0500 (CDT) Received: from localhost by kzerza.americas.sgi.com (SGI-8.9.3/SGI-client-1.6c) via ESMTP id LAA52022; Wed, 23 Aug 2000 11:21:30 -0500 (CDT) Date: Wed, 23 Aug 2000 11:21:30 -0500 From: Brent Casavant X-Sender: bcasavan@kzerza.americas.sgi.com Reply-To: Brent Casavant To: linux-mips@oss.sgi.com cc: Pete Popov Subject: Re: indigo2 In-Reply-To: <20000823165051.I2501@paradigm.rfc822.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 23 Aug 2000, Florian Lohoff wrote: > On Tue, Aug 22, 2000 at 04:52:26PM -0700, Pete Popov wrote: > > Does anyone know where I can get hardware documentation for the Indigo2? > > I'm interested in the hardware memory map and what's on the board > > itself, such as ethernet controller, the serial ports, rtc, etc. > > Most of the stuff from the Indy should be true also. It should also > be reconstructable from the Kernel source - AFAIK there is no documentation > available for the Indigo2. There are quite a few Indy documents available at: ftp://oss.sgi.com/pub/linux/mips/doc/indy/ I've been led to believe that Indigo^2 and Indy are close enough to eachother that this sort of documentation may be all you need. Hope that helps, Brent -- Brent Casavant bcasavan@sgi.com Kernel Engineer http://reality.sgi.com/bcasavan Silicon Graphics, Inc. From owner-linux-mips@oss.sgi.com Wed Aug 23 09:27:35 2000 Received: by oss.sgi.com id ; Wed, 23 Aug 2000 09:27:26 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:61724 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 23 Aug 2000 09:27:06 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id JAA01998 for ; Wed, 23 Aug 2000 09:18:59 -0700 (PDT) mail_from (gnava@sirio.tecmor.mx) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id JAA14686 for ; Wed, 23 Aug 2000 09:26:19 -0700 (PDT) mail_from (gnava@sirio.tecmor.mx) Received: from sirio.tecmor.mx (sirio.tecmor.mx [200.33.171.1]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id JAA09759 for ; Wed, 23 Aug 2000 09:25:43 -0700 (PDT) mail_from (gnava@sirio.tecmor.mx) Received: from localhost (gnava@localhost) by sirio.tecmor.mx (8.9.3/8.9.3) with ESMTP id KAA16761 for ; Wed, 23 Aug 2000 10:33:48 -0500 Date: Wed, 23 Aug 2000 10:33:48 -0500 (CDT) From: Gabriel Nava Vazquez To: linux@cthulhu.engr.sgi.com Subject: XFree86 in Indy Message-ID: MIME-Version: 1.0 Content-Type: MULTIPART/Mixed; BOUNDARY="8323328-1100244579-967044400=:16640" Content-ID: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This message is in MIME format. The first part should be readable text, while the remaining parts are likely unreadable without MIME-aware tools. Send mail to mime@docserver.cac.washington.edu for more info. --8323328-1100244579-967044400=:16640 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Content-ID: Hello I have linux installed in an Indy and i installed XFree86 following all the instructions. When i execute xinit or startx, everything seems to be ok, the display jumps to tty7 but there is not image. If i check the terminal from i executed x11, there is no messages about errors, and if y do a ps x, there are all the process alive (x, xterm, etc). Can you help me? Do you have any experience with the xserver? Thanks Ing. Gabriel Nava Instituto Tecnologico de Morelia, Mexico --8323328-1100244579-967044400=:16640 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII; NAME=xlog Content-Transfer-Encoding: BASE64 Content-ID: Content-Description: xserver log Content-Disposition: ATTACHMENT; FILENAME=xlog DQoNClhGcmVlODYgVmVyc2lvbiA0LjAuMSAvIFggV2luZG93IFN5c3RlbQ0K KHByb3RvY29sIFZlcnNpb24gMTEsIHJldmlzaW9uIDAsIHZlbmRvciByZWxl YXNlIDY0MDApDQpSZWxlYXNlIERhdGU6IDEgSnVseSAyMDAwDQoJSWYgdGhl IHNlcnZlciBpcyBvbGRlciB0aGFuIDYtMTIgbW9udGhzLCBvciBpZiB5b3Vy IGNhcmQgaXMgbmV3ZXINCgl0aGFuIHRoZSBhYm92ZSBkYXRlLCBsb29rIGZv ciBhIG5ld2VyIHZlcnNpb24gYmVmb3JlIHJlcG9ydGluZw0KCXByb2JsZW1z LiAgKHNlZSBodHRwOi8vd3d3LlhGcmVlODYuT3JnL0ZBUSkNCk9wZXJhdGlu ZyBTeXN0ZW06IExpbnV4IDIuMi4xMyBtaXBzIFtFTEZdIA0KKD09KSBMb2cg ZmlsZTogIi92YXIvbG9nL1hGcmVlODYuMC5sb2ciLCBUaW1lOiBUdWUgQXVn IDIyIDE2OjU4OjQ0IDIwMDANCig9PSkgVXNpbmcgY29uZmlnIGZpbGU6ICIv ZXRjL1gxMS9YRjg2Q29uZmlnIg0KTWFya2VyczogKC0tKSBwcm9iZWQsICgq KikgZnJvbSBjb25maWcgZmlsZSwgKD09KSBkZWZhdWx0IHNldHRpbmcsDQog ICAgICAgICAoKyspIGZyb20gY29tbWFuZCBsaW5lLCAoISEpIG5vdGljZSwg KElJKSBpbmZvcm1hdGlvbmFsLA0KICAgICAgICAgKFdXKSB3YXJuaW5nLCAo RUUpIGVycm9yLCAoPz8pIHVua25vd24uDQooPT0pIFNlcnZlckxheW91dCAi c2ltcGxlIGxheW91dCINCigqKikgfC0tPlNjcmVlbiAiU2NyZWVuIDEiICgw KQ0KKCoqKSB8ICAgfC0tPk1vbml0b3IgIlNHSSBHRE0xN2UxMSINCigqKikg fCAgIHwtLT5EZXZpY2UgIk5ld3BvcnQgR3JhcGhpY3MiDQooKiopIHwtLT5J bnB1dCBEZXZpY2UgIk1vdXNlMSINCigqKikgfC0tPklucHV0IERldmljZSAi S2V5Ym9hcmQxIg0KKFdXKSBUaGUgZGlyZWN0b3J5ICIvdXNyL1gxMVI2L2xp Yi9YMTEvZm9udHMvVHlwZTEvIiBkb2VzIG5vdCBleGlzdC4NCglFbnRyeSBk ZWxldGVkIGZyb20gZm9udCBwYXRoLg0KKFdXKSBUaGUgZGlyZWN0b3J5ICIv dXNyL1gxMVI2L2xpYi9YMTEvZm9udHMvU3BlZWRvLyIgZG9lcyBub3QgZXhp c3QuDQoJRW50cnkgZGVsZXRlZCBmcm9tIGZvbnQgcGF0aC4NCigqKikgRm9u dFBhdGggc2V0IHRvICIvdXNyL1gxMVI2L2xpYi9YMTEvZm9udHMvbG9jYWwv LC91c3IvWDExUjYvbGliL1gxMS9mb250cy9taXNjLywvdXNyL1gxMVI2L2xp Yi9YMTEvZm9udHMvNzVkcGkvOnVuc2NhbGVkLC91c3IvWDExUjYvbGliL1gx MS9mb250cy8xMDBkcGkvOnVuc2NhbGVkLC91c3IvWDExUjYvbGliL1gxMS9m b250cy9DSUQvLC91c3IvWDExUjYvbGliL1gxMS9mb250cy83NWRwaS8sL3Vz ci9YMTFSNi9saWIvWDExL2ZvbnRzLzEwMGRwaS8iDQooKiopIFJnYlBhdGgg c2V0IHRvICIvdXNyL1gxMVI2L2xpYi9YMTEvcmdiIg0KKC0tKSB1c2luZyBW VCBudW1iZXIgNw0KDQooRUUpIE5vIE9TIFBDSSBzdXBwb3J0IGF2YWlsYWJs ZQ0KKElJKSB2NGwgZHJpdmVyIGZvciBWaWRlbzRMaW51eA0KKElJKSBOZXdw b3J0OiBkcml2ZXIgZm9yIE5ld3BvcnQgR3JhcGhpY3MgQ2FyZDogWEwNCigq KikgTmV3cG9ydCgwKTogRGVwdGggOCwgKC0tKSBmcmFtZWJ1ZmZlciBicHAg OA0KKD09KSBOZXdwb3J0KDApOiBEZWZhdWx0IHZpc3VhbCBpcyBQc2V1ZG9D b2xvcg0KKD09KSBOZXdwb3J0KDApOiBVc2luZyBnYW1tYSBjb3JyZWN0aW9u ICgxLjAsIDEuMCwgMS4wKQ0KKC0tKSBOZXdwb3J0KDApOiBOZXdwb3J0IEdy YXBoaWNzIEJvYXJkIHJldmlzaW9uIDYsIGNtYXAgcmV2aXNpb24gRA0KKC0t KSBOZXdwb3J0KDApOiBOZXdwb3J0IGhhcyA4IGJpdHBsYW5lcw0KKD09KSBO ZXdwb3J0KDApOiBVc2luZyBTVyBjdXJzb3INCihJSSkgTmV3cG9ydCgwKTog U0dJIEdETTE3ZTExOiBVc2luZyBoc3luYyByYW5nZSBvZiAgMzAuMDAtIDgy LjAwIGtIeg0KKElJKSBOZXdwb3J0KDApOiBTR0kgR0RNMTdlMTE6IFVzaW5n IHZyZWZyZXNoIHJhbmdlIG9mICA1MC4wMC0xMjAuMDAgSHoNCihJSSkgTmV3 cG9ydCgwKTogQ2xvY2sgcmFuZ2U6ICAxMC4wMCB0byAzMDAuMDAgTUh6DQoo V1cpIE5ld3BvcnQoMCk6IE1vZGUgIjEyODB4OTYwIiBkZWxldGVkIChoc3lu YyBvdXQgb2YgcmFuZ2UpDQooV1cpIE5ld3BvcnQoMCk6IE1vZGUgIjEyODB4 MTAyNCIgZGVsZXRlZCAoaHN5bmMgb3V0IG9mIHJhbmdlKQ0KKFdXKSBOZXdw b3J0KDApOiBNb2RlICIxNjAweDEyMDAiIGRlbGV0ZWQgKGluc3VmZmljaWVu dCBtZW1vcnkgZm9yIG1vZGUpDQooV1cpIE5ld3BvcnQoMCk6IE1vZGUgIjE2 MDB4MTIwMCIgZGVsZXRlZCAoaW5zdWZmaWNpZW50IG1lbW9yeSBmb3IgbW9k ZSkNCihXVykgTmV3cG9ydCgwKTogTW9kZSAiMTYwMHgxMjAwIiBkZWxldGVk IChpbnN1ZmZpY2llbnQgbWVtb3J5IGZvciBtb2RlKQ0KKFdXKSBOZXdwb3J0 KDApOiBNb2RlICIxNjAweDEyMDAiIGRlbGV0ZWQgKGluc3VmZmljaWVudCBt ZW1vcnkgZm9yIG1vZGUpDQooV1cpIE5ld3BvcnQoMCk6IE1vZGUgIjE2MDB4 MTIwMCIgZGVsZXRlZCAoaW5zdWZmaWNpZW50IG1lbW9yeSBmb3IgbW9kZSkN CihXVykgTmV3cG9ydCgwKTogTW9kZSAiMTc5MngxMzQ0IiBkZWxldGVkIChp bnN1ZmZpY2llbnQgbWVtb3J5IGZvciBtb2RlKQ0KKFdXKSBOZXdwb3J0KDAp OiBNb2RlICIxNzkyeDEzNDQiIGRlbGV0ZWQgKGluc3VmZmljaWVudCBtZW1v cnkgZm9yIG1vZGUpDQooV1cpIE5ld3BvcnQoMCk6IE1vZGUgIjE4NTZ4MTM5 MiIgZGVsZXRlZCAoaW5zdWZmaWNpZW50IG1lbW9yeSBmb3IgbW9kZSkNCihX VykgTmV3cG9ydCgwKTogTW9kZSAiMTg1NngxMzkyIiBkZWxldGVkIChpbnN1 ZmZpY2llbnQgbWVtb3J5IGZvciBtb2RlKQ0KKFdXKSBOZXdwb3J0KDApOiBN b2RlICIxOTIweDE0NDAiIGRlbGV0ZWQgKGluc3VmZmljaWVudCBtZW1vcnkg Zm9yIG1vZGUpDQooV1cpIE5ld3BvcnQoMCk6IE1vZGUgIjE5MjB4MTQ0MCIg ZGVsZXRlZCAoaW5zdWZmaWNpZW50IG1lbW9yeSBmb3IgbW9kZSkNCigtLSkg TmV3cG9ydCgwKTogVmlydHVhbCBzaXplIGlzIDEyODB4MTAyNCAocGl0Y2gg MTI4MCkNCigqKikgTmV3cG9ydCgwKTogRGVmYXVsdCBtb2RlICIxMjgweDEw MjQiOiAxMzUuMCBNSHosIDgwLjAga0h6LCA3NS4wIEh6DQooPT0pIE5ld3Bv cnQoMCk6IERQSSBzZXQgdG8gKDc1LCA3NSkNCig9PSkgTmV3cG9ydCgwKTog QmFja2luZyBzdG9yZSBkaXNhYmxlZA0KKFdXKSBOZXdwb3J0KDApOiBPcHRp b24gIlNpbGtlbm1vdXNlIiBpcyBub3QgdXNlZA0KUEVYRXh0ZW5zaW9uSW5p dDogQ291bGRuJ3Qgb3BlbiBkZWZhdWx0IFBFWCBmb250IGZpbGUgIFJvbWFu X00NCigqKikgTW91c2UxOiBQcm90b2NvbDogIlBTLzIiDQooKiopIE1vdXNl MTogQ29yZSBQb2ludGVyDQooPT0pIE1vdXNlMTogQnV0dG9uczogMw0KKElJ KSBLZXlib2FyZCAiS2V5Ym9hcmQxIiBoYW5kbGVkIGJ5IGxlZ2FjeSBkcml2 ZXINCihJSSkgWElOUFVUOiBBZGRpbmcgZXh0ZW5kZWQgaW5wdXQgZGV2aWNl ICJNb3VzZTEiICh0eXBlOiBNT1VTRSkNCg0K --8323328-1100244579-967044400=:16640-- From owner-linux-mips@oss.sgi.com Wed Aug 23 13:01:26 2000 Received: by oss.sgi.com id ; Wed, 23 Aug 2000 13:01:16 -0700 Received: from sgigate.SGI.COM ([204.94.209.1]:2091 "EHLO gate-sgigate.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 23 Aug 2000 13:00:43 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 23 Aug 2000 12:56:57 -0700 Date: Wed, 23 Aug 2000 12:56:57 -0700 From: Ralf Baechle To: Kanoj Sarcar Cc: linux-mips@oss.sgi.com Subject: Re: CVS Update@oss.sgi.com: linux Message-ID: <20000823125657.A1008@bacchus.dhis.org> References: <20000823172400Z42326-31375+197@oss.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000823172400Z42326-31375+197@oss.sgi.com>; from kanoj@oss.sgi.com on Wed, Aug 23, 2000 at 10:23:50AM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Aug 23, 2000 at 10:23:50AM -0700, Kanoj Sarcar wrote: > Log message: > Make prom_printf() functional on IP27s. And prom_printf() is not an > init function, it needs to be around during regular system usage. On my system after the first TLB flush all PROM functions are no longer usable since the function pointer point to mapped space. Similar for other ARC machines. Ralf From owner-linux-mips@oss.sgi.com Wed Aug 23 16:15:18 2000 Received: by oss.sgi.com id ; Wed, 23 Aug 2000 16:15:08 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:15709 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 23 Aug 2000 16:14:45 -0700 Received: from google.engr.sgi.com (google.engr.sgi.com [163.154.10.145]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id QAA01181; Wed, 23 Aug 2000 16:20:32 -0700 (PDT) mail_from (kanoj@google.engr.sgi.com) Received: (from kanoj@localhost) by google.engr.sgi.com (SGI-8.9.3/8.9.3) id QAA92824; Wed, 23 Aug 2000 16:12:58 -0700 (PDT) From: Kanoj Sarcar Message-Id: <200008232312.QAA92824@google.engr.sgi.com> Subject: Re: CVS Update@oss.sgi.com: linux To: ralf@oss.sgi.com (Ralf Baechle) Date: Wed, 23 Aug 2000 16:12:58 -0700 (PDT) Cc: kanoj@oss.sgi.com (Kanoj Sarcar), linux-mips@oss.sgi.com In-Reply-To: <20000823125657.A1008@bacchus.dhis.org> from "Ralf Baechle" at Aug 23, 2000 12:56:57 PM X-Mailer: ELM [version 2.5 PL2] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > On Wed, Aug 23, 2000 at 10:23:50AM -0700, Kanoj Sarcar wrote: > > > Log message: > > Make prom_printf() functional on IP27s. And prom_printf() is not an > > init function, it needs to be around during regular system usage. > > On my system after the first TLB flush all PROM functions are no longer > usable since the function pointer point to mapped space. Similar for > other ARC machines. > > Ralf > I can see how the IP27 can have access to prom functions after init. Not sure how arc behaves on other machines, but I guess if you really wanted to use arc prom functions after init, you could take steps to ensure that ... Kanoj From owner-linux-mips@oss.sgi.com Thu Aug 24 00:32:39 2000 Received: by oss.sgi.com id ; Thu, 24 Aug 2000 00:32:29 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:55305 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 24 Aug 2000 00:32:06 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id AAA00029 for ; Thu, 24 Aug 2000 00:37:53 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA93347 for ; Thu, 24 Aug 2000 00:31:19 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA04923 for ; Thu, 24 Aug 2000 00:31:16 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from bilbo.physik.uni-konstanz.de [134.34.144.31] by gandalf.physik.uni-konstanz.de with esmtp (Exim 2.05 #1 (Debian)) id 13RrTT-00048W-00; Thu, 24 Aug 2000 09:30:55 +0200 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 2.05 #1 (Debian)) id 13RrTT-0007p6-00; Thu, 24 Aug 2000 09:30:55 +0200 Date: Thu, 24 Aug 2000 09:30:55 +0200 From: Guido Guenther To: Gabriel Nava Vazquez Cc: linux@cthulhu.engr.sgi.com Subject: Re: XFree86 in Indy Message-ID: <20000824093055.B30018@bilbo.physik.uni-konstanz.de> Mail-Followup-To: Gabriel Nava Vazquez , linux@cthulhu.engr.sgi.com References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0i In-Reply-To: ; from gnava@sirio.tecmor.mx on Wed, Aug 23, 2000 at 10:33:48AM -0500 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Try adding: Option "shadowfb" "yes" to the device section of your XF86Config file. -- Guido On Wed, Aug 23, 2000 at 10:33:48AM -0500, Gabriel Nava Vazquez wrote: > > Hello > > I have linux installed in an Indy and i installed XFree86 following > all the instructions. > > When i execute xinit or startx, everything seems to be ok, the display > jumps to tty7 but there is not image. If i check the terminal from i > executed x11, there is no messages about errors, and if y do a ps x, > there are all the process alive (x, xterm, etc). > > Can you help me? Do you have any experience with the xserver? > > Thanks > > Ing. Gabriel Nava > Instituto Tecnologico de Morelia, > Mexico -- GPG-Public Key: finger agx@debian.org From owner-linux-mips@oss.sgi.com Fri Aug 25 02:04:55 2000 Received: by oss.sgi.com id ; Fri, 25 Aug 2000 02:04:36 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:58763 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Fri, 25 Aug 2000 02:04:05 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id LAA08056; Fri, 25 Aug 2000 11:02:58 +0200 (MET DST) Date: Fri, 25 Aug 2000 11:02:57 +0200 (MET DST) From: "Maciej W. Rozycki" To: linux-mips@fnet.fr, linux-mips@oss.sgi.com cc: Arnaldo Carvalho de Melo Subject: [PATCH] dz.c: cleanups, getting rid of panic and suser (fwd) Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, Here is what I got from linux-kernel today. I thought someone might be interested. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + ---------- Forwarded message ---------- Message-ID: <20000824194303.B3047@conectiva.com.br> Date: Thu, 24 Aug 2000 19:43:03 -0300 From: Arnaldo Carvalho de Melo To: "Olivier A.D.Lebaillif" Cc: linux-kernel@vger.kernel.org Subject: [PATCH] dz.c: cleanups, getting rid of panic and suser Hi, Please take a look and consider applying. - Arnaldo --- linux-2.4.0-test7/drivers/char/dz.c Mon Jun 26 22:03:05 2000 +++ linux-2.4.0-test7.acme/drivers/char/dz.c Thu Aug 24 19:41:53 2000 @@ -17,6 +17,10 @@ * * Parts (C) 1999 David Airlie, airlied@linux.ie * [07-SEP-99] Bugfixes + * + * Arnaldo Carvalho de Melo 08/23/2000 + * - get rid of verify_area, panics and suser, using !capable(CAP_SYS_ADMIN) now + * - include missing restore_flags in dz_init */ #define DEBUG_DZ 1 @@ -844,14 +848,16 @@ struct dz_serial old_info; int retval = 0; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (!new_info) return -EFAULT; - copy_from_user (&new_serial, new_info, sizeof(new_serial)); - old_info = *info; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; - if (!suser()) - return -EPERM; + old_info = *info; if (info->count > 1) return -EBUSY; @@ -919,7 +925,6 @@ static int dz_ioctl (struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - int error; struct dz_serial * info = (struct dz_serial *)tty->driver_data; int retval; @@ -949,40 +954,30 @@ return 0; case TIOCGSOFTCAR: - error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(long)); - if (error) - return error; - put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); - return 0; + return put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); case TIOCSSOFTCAR: - error = get_user (arg, (unsigned long *)arg); - if (error) - return error; + if (get_user (arg, (unsigned long *)arg)) + return -EFAULT; tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); return 0; case TIOCGSERIAL: - error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); - if (error) - return error; + if (verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct))) + return -EFAULT; return get_serial_info (info, (struct serial_struct *)arg); case TIOCSSERIAL: return set_serial_info (info, (struct serial_struct *) arg); case TIOCSERGETLSR: /* Get line status register */ - error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); - if (error) - return error; - else - return get_lsr_info (info, (unsigned int *)arg); + if (verify_area (VERIFY_WRITE, (void *)arg, sizeof(unsigned int))) + return -EFAULT; + return get_lsr_info (info, (unsigned int *)arg); case TIOCSERGSTRUCT: - error = verify_area (VERIFY_WRITE, (void *)arg, sizeof(struct dz_serial)); - if (error) - return error; - copy_to_user((struct dz_serial *)arg, info, sizeof(struct dz_serial)); + if (copy_to_user((struct dz_serial *)arg, info, sizeof(struct dz_serial))) + return -EFAULT; return 0; default: @@ -1290,7 +1285,7 @@ int __init dz_init(void) { - int i, flags; + int i, flags, ret; struct dz_serial *info; /* Setup base handler, and timer table. */ @@ -1340,10 +1335,16 @@ callout_driver.major = TTYAUX_MAJOR; callout_driver.subtype = SERIAL_TYPE_CALLOUT; - if (tty_register_driver (&serial_driver)) - panic("Couldn't register serial driver\n"); - if (tty_register_driver (&callout_driver)) - panic("Couldn't register callout driver\n"); + ret = tty_register_driver (&serial_driver); + if (ret) { + printk(KERN_ERR "Couldn't register serial driver\n"); + return ret; + } + ret = tty_register_driver (&callout_driver); + if (ret) { + printk(KERN_ERR "Couldn't register callout driver\n"); + goto cleanup_serial_driver; + } save_flags(flags); cli(); for (i=0; i < DZ_NB_PORT; i++) @@ -1376,8 +1377,10 @@ /* If we are pointing to address zero then punt - not correctly set up in setup.c to handle this. */ - if (! info->port) + if (!info->port) { + restore_flags(flags); return 0; + } printk("ttyS%02d at 0x%04x (irq = %d)\n", info->line, info->port, SERIAL); } @@ -1396,12 +1399,17 @@ is updated... in request_irq - to immediatedly obliterate it is unwise. */ restore_flags(flags); - - if (request_irq (SERIAL, dz_interrupt, SA_INTERRUPT, "DZ", lines[0])) - panic ("Unable to register DZ interrupt\n"); + if (request_irq (SERIAL, dz_interrupt, SA_INTERRUPT, "DZ", lines[0])) { + printk(KERN_ERR "Unable to register DZ interrupt\n"); + ret = -EBUSY; + goto cleanup_callout_driver; + } return 0; +cleanup_callout_driver: tty_unregister_driver(&callout_driver); +cleanup_serial_driver: tty_unregister_driver(&serial_driver); + return ret; } #ifdef CONFIG_SERIAL_CONSOLE - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/ From owner-linux-mips@oss.sgi.com Fri Aug 25 13:20:18 2000 Received: by oss.sgi.com id ; Fri, 25 Aug 2000 13:20:08 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:41740 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Fri, 25 Aug 2000 13:19:35 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 0E30A80E; Fri, 25 Aug 2000 22:22:35 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 23BBF8FF5; Fri, 25 Aug 2000 22:16:20 +0200 (CEST) Date: Fri, 25 Aug 2000 22:16:20 +0200 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: no controlling tty on mipsel Message-ID: <20000825221620.A1280@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, with the declinux root and the glibc 2.0.6-5lm (Current rpm) i get the following error on BOTH decstations i have up and running (Both R4000) [flo@reconfig most]$ scp *.deb *.changes root@repeat.rfc822.org:/ftp.rfc822.org/packages You have no controlling tty. Cannot read passphrase. lost connection [flo@reconfig most]$ tty /dev/ttyp0 Hmmm ... Ideas ? Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." From owner-linux-mips@oss.sgi.com Fri Aug 25 15:41:11 2000 Received: by oss.sgi.com id ; Fri, 25 Aug 2000 15:41:01 -0700 Received: from gatekeep.ti.com ([192.94.94.61]:50081 "EHLO gatekeep.ti.com") by oss.sgi.com with ESMTP id ; Fri, 25 Aug 2000 15:40:36 -0700 Received: from dlep7.itg.ti.com ([157.170.134.103]) by gatekeep.ti.com (8.11.0/8.11.0) with ESMTP id e7PMdkD20982 for ; Fri, 25 Aug 2000 17:39:46 -0500 (CDT) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA03998 for ; Fri, 25 Aug 2000 17:39:38 -0500 (CDT) Received: from dlep4.itg.ti.com (dlep4.itg.ti.com [157.170.188.63]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA03994 for ; Fri, 25 Aug 2000 17:39:38 -0500 (CDT) Received: from ti.com (reddwarf.sc.ti.com [158.218.100.143]) by dlep4.itg.ti.com (8.9.3/8.9.3) with ESMTP id RAA04323 for ; Fri, 25 Aug 2000 17:39:45 -0500 (CDT) Message-ID: <39A6F826.D444E0@ti.com> Date: Fri, 25 Aug 2000 16:50:15 -0600 From: Jeff Harrell X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Question concerning discontinuities in memory map. Content-Type: multipart/mixed; boundary="------------E8D716CD92D021741AC0D7DA" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------E8D716CD92D021741AC0D7DA Content-Type: multipart/alternative; boundary="------------BC3CC499A711E3C100153003" --------------BC3CC499A711E3C100153003 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I have a question concerning a discontinuity in my memory map. The development board that I am working on currently has the start of its SDRAM at 0x14000000 (physical memory). It looks like a lot of the code is written under the assumption that the base of the kernel will be at 0x80000000. I have had to modify several sections of code to handle this discontinuity with respect to max_low_pfn, high_memory, num_physpages max_mapnr, and low (/arch/mips/mm/init.c). These variables seem to use the PAGE_SHIFT variable to locate the start of that page in physical memory: (e.g., max_mapnr << PAGE_SHIFT). It looks like a lot of the problem stems from max_low_pfn. In init_bootmem_core: ----8< snippet from init_bootmem_core ( mm/bootmem.c) 8<---------- static unsigned long __init init_bootmem_core (bootmem_data_t *bdata, unsigned long mapstart, unsigned long start, unsigned long end) { unsigned long mapsize = ((end - start)+7)/8; mapsize = (mapsize + (sizeof(long) - 1UL)) & ~(sizeof(long) - 1UL); bdata->node_bootmem_map = phys_to_virt(mapstart << PAGE_SHIFT); bdata->node_boot_start = (start << PAGE_SHIFT); bdata->node_low_pfn = end; ... ---------------------------------------------------- the mapsize is defined by end-start, where start is the _end (kernel_end) + bootmap_size. therefore it looks like end should represent the end of memory (i.e. SDRAM). In our case this is 0x15FFFFFF (i.e. 32M). If I let the rest of the kernel process max_low_pfn and the associated variable normally, the paging routines will calculate that I have 335M of memory! I seem to be chasing this problem through the kernel. Is there a central place in the code that would handle the offset properly? I don't think I have caught all of the implications of this change yet because I am still failing in the paging routines. Any information that is available on how this can be accomplished would be greatly appreciated. Thanks, Jeff -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Jeff Harrell Work: (801) 619-6104 Broadband Access group/TI Cell: (801) 597-6268 jharrell@ti.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --------------BC3CC499A711E3C100153003 Content-Type: text/html; charset=us-ascii Content-Transfer-Encoding: 7bit I have a question concerning a discontinuity in my memory map.  The development board that I am
working on currently has the start of its SDRAM at 0x14000000 (physical memory).  It looks like a
lot of the code is written under the assumption that the base of the kernel will be at 0x80000000.  I
have had to modify several sections of code to handle this discontinuity with respect to max_low_pfn,
high_memory, num_physpages  max_mapnr, and low (/arch/mips/mm/init.c).  These variables seem
to use the PAGE_SHIFT variable to locate the start of that page in physical memory: (e.g.,   max_mapnr
<< PAGE_SHIFT).  It looks like a lot of the problem stems from max_low_pfn.  In init_bootmem_core:

----8<  snippet from init_bootmem_core ( mm/bootmem.c) 8<----------

static unsigned long __init init_bootmem_core (bootmem_data_t *bdata,
          unsigned long mapstart, unsigned long start, unsigned long end)
  {
          unsigned long mapsize = ((end - start)+7)/8;
 
          mapsize = (mapsize + (sizeof(long) - 1UL)) & ~(sizeof(long) - 1UL);
          bdata->node_bootmem_map = phys_to_virt(mapstart << PAGE_SHIFT);
          bdata->node_boot_start = (start << PAGE_SHIFT);
          bdata->node_low_pfn = end;
  ...
----------------------------------------------------

the mapsize is defined by end-start, where start is the _end (kernel_end) + bootmap_size.
therefore it looks like end should represent the end of memory (i.e. SDRAM).  In our case
this is 0x15FFFFFF (i.e. 32M).  If I let the rest of the kernel process max_low_pfn and the
associated variable normally,  the paging routines will calculate that I have 335M of memory!
I seem to be chasing this problem through the kernel.  Is there a central place in the code that
would handle the offset properly?  I don't think I have caught all of the implications of this change
yet because I am still failing in the paging routines.  Any information that is available on how this
can be accomplished would be greatly appreciated.

Thanks,
Jeff

-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jeff Harrell                    Work:  (801) 619-6104 
Broadband Access group/TI       Cell:  (801) 597-6268      
jharrell@ti.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  --------------BC3CC499A711E3C100153003-- --------------E8D716CD92D021741AC0D7DA Content-Type: text/x-vcard; charset=us-ascii; name="jharrell.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Jeff Harrell Content-Disposition: attachment; filename="jharrell.vcf" begin:vcard n:Harrell;Jeff tel;cell:(801) 597-6268 tel;fax:(801) 619-6150 tel;work:(801) 619-6104 x-mozilla-html:TRUE url:http://www.ti.com org:Broadband Access Group version:2.1 email;internet:jharrell@ti.com title:Texas Instruments adr;quoted-printable:;;170 West Election Rd. Suite 100 =0D=0AMS 4106 ;Draper;Utah;84020-6410;USA x-mozilla-cpt:;0 fn:Jeff Harrell end:vcard --------------E8D716CD92D021741AC0D7DA-- From owner-linux-mips@oss.sgi.com Sat Aug 26 13:08:00 2000 Received: by oss.sgi.com id ; Sat, 26 Aug 2000 13:07:50 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:2833 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sat, 26 Aug 2000 13:07:17 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 14833822; Sat, 26 Aug 2000 22:10:27 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 802E38FF5; Sat, 26 Aug 2000 22:06:08 +0200 (CEST) Date: Sat, 26 Aug 2000 22:06:08 +0200 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: decstation boot loader Message-ID: <20000826220608.J3009@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, i sat down a couple of hours and had a look at current possibilities of booting the decstations from HD. I am not much further than i was was before - And now i got a couple of questions probably one of the more specialised mips hackers might answer. - The bootblock of the decstation might contain up to 51 extents to load from the disks. 1. Do these extents refer to the start of the disk or the start of the probably first partition. 2. Do i have to set a checksum in the bootblock or does the checksom only apply to the disklabel 3. What binarys is the bootloader able to load. From the BSD sources i guess its only raw instructions. 4. Does the MS-DOS disklabel and the DEC bootblock interfer in any kind that its impossible to have a diskloader with MS-DOS Disklabels I rewrote the bootprep.c today to play around with loading different binarys. I added the honor of partition information meaning - The new (i call it writeboot) looks at the start of the partition and calculates the extents relativ to the start of the disk. But still i dont get any results. When trying to boot those partitions with any kind of combination the prompt only returns to the prom command line. I thought of a bootloader much like the silo - Capable of reading an ext2 filesystem via libext2 etc. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." From owner-linux-mips@oss.sgi.com Sun Aug 27 05:55:55 2000 Received: by oss.sgi.com id ; Sun, 27 Aug 2000 05:55:46 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:33811 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 27 Aug 2000 05:55:20 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 5B74F826; Sun, 27 Aug 2000 14:58:34 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id E21678FF5; Sun, 27 Aug 2000 14:54:13 +0200 (CEST) Date: Sun, 27 Aug 2000 14:54:13 +0200 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: Decstation 5000/150 hangs in Delayloop (2.4.0-test6) Message-ID: <20000827145413.A306@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, i think something broke between 2.4.0-test3-pre7 and 2.4.0-test6 for the Decstation 5000/150 - The Register DUMP is of the Prom when i pressed reset. The same kernel Image works fine on my Decstation 5000/260 which is an R4400 instead of R4000. BTW: 2.4.0-test6-pre8 oopses after SCSI ------------------------------------------------------------------- KN04 V2.1k (PC: 0xbfc0075c, SP: 0x83739de8) This DECstation is a DS5000/1xx Loading R4000 MMU routines. CPU revision is: 00000430 Primary instruction cache 8kb, linesize 16 bytes. Primary data cache 8kb, linesize 16 bytes. Secondary cache sized at 1024K linesize 32 bytes. Linux version 2.4.0-test6 (flo@slimer.rfc822.org) (gcc version egcs-2.90.29 980515 (egcs-1.0.3 release)) #3 Sun Aug 27 10:37:34 GMT 2000 On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda2 console=ttyS2 Calibrating delay loop... ??? ? PC: 0xbfc0075c ? CR: 0x00000000 ? SR: 0x00510006 ? CFG: 0x00410242 ? ? MB_CS: 0x003f8000 ? MB_INT: 0x101f0000 <> ? ? SIR: 0x00000001 ? SIRM: 0x00000000 ? ? at:0002FF00 a2:000024F6 t3:A0000000 s0:00000008 s5:FFFFFFFF k1:FFFE27FD ? v0:BFDC0000 a3:0000003C t4:00000000 s1:80040584 s6:801683B0 gp:80046000 ? v1:00000000 t0:A0015CC4 t5:00000000 s2:FFFFFFFF s7:80047F80 sp:80047F80 ? a0:FFFFFFFF t1:A002FF00 t6:8017CDB4 s3:FFFFFFFF t8:00000016 fp:7E7D2BFF ? a1:00000021 t2:FFFFFFFF t7:10012001 s4:FFFFFFFF t9:00000F00 ra:BFC0068C ----------------------------------------------------------------------- Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." From owner-linux-mips@oss.sgi.com Sun Aug 27 10:20:38 2000 Received: by oss.sgi.com id ; Sun, 27 Aug 2000 10:20:28 -0700 Received: from mail.ivm.net ([62.204.1.4]:3954 "EHLO mail.ivm.net") by oss.sgi.com with ESMTP id ; Sun, 27 Aug 2000 10:19:58 -0700 Received: from franz.no.dom (port89.duesseldorf.ivm.de [195.247.65.89]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id TAA07373; Sun, 27 Aug 2000 19:19:06 +0200 X-To: linux-mips@oss.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <20000826220608.J3009@paradigm.rfc822.org> Date: Sun, 27 Aug 2000 19:19:49 +0200 (CEST) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Florian Lohoff Subject: RE: decstation boot loader Cc: linux-mips@oss.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Flo, On 26-Aug-00 Florian Lohoff wrote: > i sat down a couple of hours and had a look at current possibilities > of booting the decstations from HD. I am not much further than > i was was before - And now i got a couple of questions probably one > of the more specialised mips hackers might answer. > > - The bootblock of the decstation might contain up to 51 extents > to load from the disks. > > 1. Do these extents refer to the start of the disk or the start > of the probably first partition. The PROM knows nothing about partitions or such so these extends refer obviously to the start of the disk. > 2. Do i have to set a checksum in the bootblock or does the checksom > only apply to the disklabel The PROM doesn't even know anything about a checksum. > 3. What binarys is the bootloader able to load. From the BSD sources > i guess its only raw instructions. Yes. "mipsel-linux-objcopy --output-target=binary" is your friend. > 4. Does the MS-DOS disklabel and the DEC bootblock interfer in any > kind that its impossible to have a diskloader with MS-DOS Disklabels No, that should work as long as the the the boot map is short enough not to overwrite the partition information. > I rewrote the bootprep.c today to play around with loading different binarys. > I added the honor of partition information meaning - The new (i call > it writeboot) looks at the start of the partition and calculates > the extents relativ to the start of the disk. But still i dont get any > results. When trying to boot those partitions with any kind of combination > the prompt only returns to the prom command line. I have successfully booted Linux kernels with bootprep. Depending on the code you want to load, for example a second stage bootloader, you may need to adjust "boot_block->loadAddr" and "boot_block->execAddr". > I thought of a bootloader much like the silo - Capable of reading > an ext2 filesystem via libext2 etc. That's what I always wanted to do but I never found the time... -- Regards, Harald From owner-linux-mips@oss.sgi.com Sun Aug 27 10:40:08 2000 Received: by oss.sgi.com id ; Sun, 27 Aug 2000 10:39:58 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:2573 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Sun, 27 Aug 2000 10:39:31 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id E130E82E; Sun, 27 Aug 2000 19:42:45 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 7AA688FF5; Sun, 27 Aug 2000 19:38:20 +0200 (CEST) Date: Sun, 27 Aug 2000 19:38:20 +0200 From: Florian Lohoff To: Harald Koerfgen Cc: linux-mips@oss.sgi.com Subject: Re: decstation boot loader Message-ID: <20000827193820.B325@paradigm.rfc822.org> References: <20000826220608.J3009@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from Harald.Koerfgen@home.ivm.de on Sun, Aug 27, 2000 at 07:19:49PM +0200 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Aug 27, 2000 at 07:19:49PM +0200, Harald Koerfgen wrote: > > The PROM knows nothing about partitions or such so these extends refer > obviously to the start of the disk. > Good > > Yes. "mipsel-linux-objcopy --output-target=binary" is your friend. > Even worse ... Compilation - Relocation - Stripping - start.b: start.r objcopy --remove-section=.bss \ --remove-section=.data \ --remove-section=.reginfo \ --remove-section=.mdebug \ --output-target=binary start.r start.b start.r: start.o ld -Ttext=0x80020000 -Tdata=0x80020000 -Tbss=0x80020000 \ start.o -o start.r start.o: start.S gcc -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic -c start.S > > 4. Does the MS-DOS disklabel and the DEC bootblock interfer in any > > kind that its impossible to have a diskloader with MS-DOS Disklabels > > No, that should work as long as the the the boot map is short enough not to > overwrite the partition information. > Does that mean that the limit of the boot_map in the bootprep is arbitrary and the DEC firmware bootloader would continue read/process boot_maps in the whole first block ? > I have successfully booted Linux kernels with bootprep. Depending on > the code you want to load, for example a second stage bootloader, you > may need to adjust "boot_block->loadAddr" and "boot_block->execAddr". Yep - I guessed so - loadAddr hasnt changed but i guess execAddr needs to point to kernel_entry ... > > I thought of a bootloader much like the silo - Capable of reading > > an ext2 filesystem via libext2 etc. > > That's what I always wanted to do but I never found the time... :) - Well see - I got someone else i donated a Decstation to whom i gave the first goal of writing a boot loader for the donation :) The problem right now which i have is that i cant seem to load ANYTHING - Not raw instructions not elf not ecoff - Even simplest instruction like a tight loop (Wouldnt go back into prom) dont seem to get executed. Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." From owner-linux-mips@oss.sgi.com Sun Aug 27 12:16:08 2000 Received: by oss.sgi.com id ; Sun, 27 Aug 2000 12:15:59 -0700 Received: from tomts8.bellnexxia.net ([209.226.175.52]:53721 "EHLO tomts8-srv.bellnexxia.net") by oss.sgi.com with ESMTP id ; Sun, 27 Aug 2000 12:15:36 -0700 Received: from free.fr ([206.172.229.9]) by tomts8-srv.bellnexxia.net (InterMail vM.4.01.03.00 201-229-121) with ESMTP id <20000827191458.NDZN29984.tomts8-srv.bellnexxia.net@free.fr>; Sun, 27 Aug 2000 15:14:58 -0400 Message-ID: <39A93106.A025454E@free.fr> Date: Sun, 27 Aug 2000 15:17:26 +0000 From: Famille Chauvat X-Mailer: Mozilla 4.7 [en] (X11; U; Linux 2.2.9-27mdk i686) X-Accept-Language: fr-FR, en MIME-Version: 1.0 To: Nathan Fraser CC: linux-mips@oss.sgi.com Subject: Re: [Install trouble] : mount failed: bad address References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I just finish to install Linux on the Indy and everythings looks fine...except: - how can I boot without a DHCP server. When I try to do that, a message about the boot partition explain that I cannot do this. Thanks a lot Philippe From owner-linux-mips@oss.sgi.com Sun Aug 27 15:36:39 2000 Received: by oss.sgi.com id ; Sun, 27 Aug 2000 15:36:20 -0700 Received: from utenti.global-italianet.it ([194.184.55.137]:61457 "HELO server2.global-italianet.it") by oss.sgi.com with SMTP id ; Sun, 27 Aug 2000 15:35:57 -0700 Received: from smtp.indiatimes.com [209.69.67.137] by server2.global-italianet.it (SMTPD32-4.04) id AD5B2E0120; Sun, 27 Aug 2000 23:59:39 +03d00 Message-Id: To: gettripfree3@hotmail.com Date: Sun, 27 Aug 2000 17:58:20 -0500 From: lounis2@yahoo.com Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7BIT Subject: FREE 3 Day Trip to Paradise & Deluxe Hotel Reply-To: lounis2@yahoo.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing WEALTH IN THE NEW MILLENNIUM The Internet and new technology are creating more 7 Figure ($1,000,000) incomes than any time in history. If you feel you are not being paid what your worth, please visit our web site. The information is FREE. HUGE COMPENSATION AVAILABLE! This is your chance to get in on the ground floor of the Multi-Billion-Dollar Home Based Business Revolution. PLUS, RECEIVE A COMPLIMENTARY GIFT WHEN VISITING OUR WEB SITE. http://216.199.83.15/ <-- Click Here For FREE Vacation To Be Removed from out list send email to jaban92@yahoo.com From owner-linux-mips@oss.sgi.com Mon Aug 28 16:40:13 2000 Received: by oss.sgi.com id ; Mon, 28 Aug 2000 16:40:04 -0700 Received: from saturn.mikemac.com ([216.99.199.88]:18489 "EHLO mikemac.com") by oss.sgi.com with ESMTP id ; Mon, 28 Aug 2000 16:39:35 -0700 Received: from Saturn (localhost [127.0.0.1]) by mikemac.com (8.8.7/8.7.3) with ESMTP id QAA00056 for ; Mon, 28 Aug 2000 16:39:04 -0700 Message-Id: <200008282339.QAA00056@mikemac.com> To: linux-mips@oss.sgi.com Subject: PCMCIA memory window Date: Mon, 28 Aug 2000 16:39:03 -0700 From: Mike McDonald Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Where should the PCMCIA memory window be mapped to? I have no ISA bus so the default 0xc0000-0xfffff isn't appropriate. I do have PCI working and it's mapped at 0xB0000000 to 0xB6000000. Thanks, Mike McDonald mikemac@mikemac.com From owner-linux-mips@oss.sgi.com Thu Aug 31 15:47:54 2000 Received: by oss.sgi.com id ; Thu, 31 Aug 2000 15:47:43 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:55300 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Thu, 31 Aug 2000 15:47:36 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 971867F8; Fri, 1 Sep 2000 00:51:42 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 3E61F8FF5; Fri, 1 Sep 2000 00:46:13 +0200 (CEST) Date: Fri, 1 Sep 2000 00:46:13 +0200 From: Florian Lohoff To: linux-mips@oss.sgi.com Subject: crash in r4k_dma_cache_wback_inv_pc on r5k on bootup Message-ID: <20000901004612.A314@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, i just got a System.map and objectdump handy while the r5k crashed :) Unable to ... at ... 00000008, epc == 880182e4, ra == 88156db0 880182a8: bcb50000 cache 0x15,0($a1) 880182ac: 14a2fffe bne $a1,$v0,880182a8 880182b0: 00a42821 addu $a1,$a1,$a0 880182b4: 40086000 mfc0 $t0,$12 880182b8: 3409ff00 li $t1,0xff00 880182bc: 01094024 and $t0,$t0,$t1 880182c0: 00094827 nor $t1,$zero,$t1 880182c4: 00c93024 and $a2,$a2,$t1 880182c8: 00c83025 or $a2,$a2,$t0 880182cc: 40866000 mtc0 $a2,$12 ... 880182dc: 3c028819 lui $v0,0x8819 880182e0: 8c429dc4 lw $v0,-25148($v0) 880182e4: 8c420008 lw $v0,8($v0) <------ 880182e8: 02002021 move $a0,$s0 880182ec: 0040f809 jalr $v0 880182f0: 02202821 move $a1,$s1 880182f4: 8fbf0018 lw $ra,24($sp) 880182f8: 8fb10014 lw $s1,20($sp) 880182fc: 8fb00010 lw $s0,16($sp) 88018300: 03e00008 jr $ra 88018304: 27bd0020 addiu $sp,$sp,32 It seems "bcops" is at 0x0 which is - aehm - bogus ? Between 20000601 (Random date) and today r4xx0.c has changed this way: --------------------------------------------------------------- -static void no_sc_noop(void) {} - -static struct bcache_ops no_sc_ops = { - (void *)no_sc_noop, (void *)no_sc_noop, - (void *)no_sc_noop, (void *)no_sc_noop -}; -struct bcache_ops *bcops = &no_sc_ops; +DECLARE_BCOPS; --------------------------------------------------------------- And DECLARE_BCOPS is defined in include/asm-mips/bcache.h as --------------------------------------------------------------- #define DECLARE_BCOPS struct bcache_ops *bcops --------------------------------------------------------------- Which is not the same - There are no "noops" suddenly and it seems this doesnt get initialized correctly at all and bcops stays "0" although in the normal codepath in arch/mips/sgi/kernel/setup.c contains 255 256 /* Now enable boardcaches, if any. */ 257 indy_sc_init(); 258 Which itself is arm/mips/sgi/kernel/indy_sc.c 221 void __init indy_sc_init(void) 222 { 223 if (indy_sc_probe()) { 224 indy_sc_enable(); 225 bcops = &indy_sc_ops; 226 } 227 } But it doesnt seem indy_sc_probe is "true" for R5k machines. This might be all of the problem with r5k machines ... We only ran with the "noop" bcache functions and now the r5k is not running with any function :) Flo -- Florian Lohoff flo@rfc822.org +49-5201-669912 "Write only memory - Oops. Time for my medication again ..." .