From owner-linuxmips@oss.sgi.com Thu Jun 1 00:17:09 2000 Received: by oss.sgi.com id ; Thu, 1 Jun 2000 00:16:59 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:37716 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 1 Jun 2000 00:16:45 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id BAA04002; Thu, 1 Jun 2000 01:21:32 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id BAA13318 for linux-list; Thu, 1 Jun 2000 01:06:04 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id BAA72538; Thu, 1 Jun 2000 01:06:00 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from localhost (localhost [127.0.0.1]) by calypso.engr.sgi.com (Postfix) with ESMTP id 25756A7875; Thu, 1 Jun 2000 01:04:40 -0700 (PDT) Date: Thu, 1 Jun 2000 01:04:40 -0700 (PDT) From: Ulf Carlsson To: jimix@watson.ibm.com Cc: linux@cthulhu.engr.sgi.com Subject: Re: cross Mips64-linux binutils problem In-Reply-To: <14638.33763.840817.330892@kitch0.watson.ibm.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linuxmips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linuxmips-outgoing > I forward ported your patch to binutils-000524 since I could not get > my hands on 000524. You can check out the CVS repository on sourceware.cygnus.com from 000424. I think I told you how to do it. I haven't been working with my binutils patches much this month, but I will probably verify them again soon. > crt0s.s:7: Internal error, aborting at /../binutils-000524/gas/config/tc-mips.c line 4364 in macro I've actually explicitly put an arort() there. If you look at line line 4364 there's a comment that explains why the abort() is there. It can be fixed, but someone still has to do it. For now, just use -G 0. > However, my relocations seem messed up! objdump fails reading them, > IRIX elfdump seems confused though readelf seems to handle it fine. I don't know what you're doing wrong. I could objdump it just fine. I haven't tested with IRIX. $ ../binutils/objdump -dr jimi-testcase.o test.o: file format elf64-littlemips Disassembly of section .text: 0000000000000000 <_start>: 0: 3c1d0000 lui $sp,0x0 0: R_MIPS_HIGHEST kernelInfoLocal 4: 67bd0000 daddiu $sp,$sp,0 4: R_MIPS_HIGHER kernelInfoLocal 8: 001dec38 dsll $sp,$sp,0x10 c: 67bd0000 daddiu $sp,$sp,0 c: R_MIPS_HI16 kernelInfoLocal 10: 001dec38 dsll $sp,$sp,0x10 14: 67bd0000 daddiu $sp,$sp,0 14: R_MIPS_LO16 kernelInfoLocal 18: dfbd0000 ld $sp,0($sp) 1c: 67bd6000 daddiu $sp,$sp,24576 20: 3c190000 lui $t9,0x0 20: R_MIPS_HIGHEST crtInit 24: 67390000 daddiu $t9,$t9,0 24: R_MIPS_HIGHER crtInit 28: 0019cc38 dsll $t9,$t9,0x10 2c: 67390000 daddiu $t9,$t9,0 2c: R_MIPS_HI16 crtInit 30: 0019cc38 dsll $t9,$t9,0x10 34: 67390000 daddiu $t9,$t9,0 34: R_MIPS_LO16 crtInit 38: 03200008 jr $t9 3c: 00000000 nop 40: 03e00008 jr $ra ... I can't see anything that's obviously wrong with the assembler output either so it should be fine. > An interesing item (but may be a red herring) is that IRIX as(1) places > R_MIPS_LO16 relocations int the .rel.text section, and gas(1) places > them (an all relocations) in .rela.text We can use both RELA and REL relocations in the 64-bit ABI. IRIX as tends to switch from one to another. Ulf From owner-linuxmips@oss.sgi.com Thu Jun 1 06:33:20 2000 Received: by oss.sgi.com id ; Thu, 1 Jun 2000 06:33:11 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:17703 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 1 Jun 2000 06:32:58 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA22688; Thu, 1 Jun 2000 07:28:04 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id HAA21960 for linux-list; Thu, 1 Jun 2000 07:22:00 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA09786; Thu, 1 Jun 2000 07:21:58 -0700 (PDT) mail_from (jimix@watson.ibm.com) Received: from igw8.watson.ibm.com (igw8.watson.ibm.com [198.81.209.20]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA09570; Thu, 1 Jun 2000 07:21:51 -0700 (PDT) mail_from (jimix@watson.ibm.com) Received: from sp1n189at0.watson.ibm.com (sp1n189at0.watson.ibm.com [9.2.104.62]) by igw8.watson.ibm.com (8.9.3/8.9.3/05-14-1999) with ESMTP id KAA15606; Thu, 1 Jun 2000 10:21:52 -0400 Received: from kitch0.watson.ibm.com (kitch0.watson.ibm.com [9.2.251.57]) by sp1n189at0.watson.ibm.com (8.9.3/Feb-20-98) with ESMTP id KAA28530; Thu, 1 Jun 2000 10:21:51 -0400 Received: (from jimix@localhost) by kitch0.watson.ibm.com (AIX4.3/8.9.3/8.9.3/01-10-2000) id KAA36312; Thu, 1 Jun 2000 10:21:51 -0400 From: jimix@pobox.com (Jimi X) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14646.29054.561175.977539@kitch0.watson.ibm.com> Date: Thu, 1 Jun 2000 10:21:50 -0400 (EDT) To: Ulf Carlsson Cc: linux@cthulhu.engr.sgi.com Subject: Re: cross Mips64-linux binutils problem In-Reply-To: References: <14638.33763.840817.330892@kitch0.watson.ibm.com> X-Mailer: VM 6.75 under 20.4 "Emerald" XEmacs Lucid Reply-To: jimix@watson.ibm.com Sender: owner-linuxmips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linuxmips-outgoing >>>>> "UC" == Ulf Carlsson writes: >> However, my relocations seem messed up! objdump fails reading >> them, IRIX elfdump seems confused though readelf seems to handle >> it fine. UC> I don't know what you're doing wrong. I could objdump it just UC> fine. I haven't tested with IRIX. How did you run the assembler? I'm using "as-new -64 -mips3 -G0", is there more? UC> $ ../binutils/objdump -dr jimi-testcase.o UC> test.o: file format elf64-littlemips hmmm.. Are you defaulting to elf64-littlemips? I had tried to do this using '-EL' option but it doesn't seem to make the switch and I still have problems. I'll get a hold of the same snapshot you are using and add the patch and see if it works any better. -Jimi X From owner-linuxmips@oss.sgi.com Thu Jun 1 07:14:24 2000 Received: by oss.sgi.com id ; Thu, 1 Jun 2000 07:14:15 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:31026 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 1 Jun 2000 07:14:04 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id IAA27296; Thu, 1 Jun 2000 08:09:10 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id IAA27260 for linux-list; Thu, 1 Jun 2000 08:06:06 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA81029; Thu, 1 Jun 2000 08:05:55 -0700 (PDT) mail_from (jimix@watson.ibm.com) Received: from igw8.watson.ibm.com (igw8.watson.ibm.com [198.81.209.20]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id IAA09414; Thu, 1 Jun 2000 08:05:37 -0700 (PDT) mail_from (jimix@watson.ibm.com) Received: from sp1n189at0.watson.ibm.com (sp1n189at0.watson.ibm.com [9.2.104.62]) by igw8.watson.ibm.com (8.9.3/8.9.3/05-14-1999) with ESMTP id LAA13964; Thu, 1 Jun 2000 11:05:40 -0400 Received: from kitch0.watson.ibm.com (kitch0.watson.ibm.com [9.2.251.57]) by sp1n189at0.watson.ibm.com (8.9.3/Feb-20-98) with ESMTP id LAA23352; Thu, 1 Jun 2000 11:05:40 -0400 Received: (from jimix@localhost) by kitch0.watson.ibm.com (AIX4.3/8.9.3/8.9.3/01-10-2000) id LAA37438; Thu, 1 Jun 2000 11:05:37 -0400 From: jimix@pobox.com (Jimi X) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14646.31673.28065.650524@kitch0.watson.ibm.com> Date: Thu, 1 Jun 2000 11:05:28 -0400 (EDT) To: Ralf Baechle , Ulf Carlsson CC: linux@cthulhu.engr.sgi.com Subject: Re: cross Mips64-linux binutils problem In-Reply-To: <20000601164415.A23324@uni-koblenz.de> References: <14638.33763.840817.330892@kitch0.watson.ibm.com> <14646.29054.561175.977539@kitch0.watson.ibm.com> <20000601164415.A23324@uni-koblenz.de> X-Mailer: VM 6.75 under 20.4 "Emerald" XEmacs Lucid Reply-To: jimix@watson.ibm.com Sender: owner-linuxmips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linuxmips-outgoing >>>>> "RB" == Ralf Baechle writes: RB> On Thu, Jun 01, 2000 at 10:21:50AM -0400, Jimi X wrote: >> >> How did you run the assembler? I'm using "as-new -64 -mips3 -G0", >> is there more? RB> Are you trying to assemble pic code? I think that's still very RB> broken in binutils even with all of Ulf's fixes. No I'm not trying to use PIC code. I made a braino on the assembler line, I'm using: as-new -64 -mips3 -G0 -non_shared I've tries just about every combination. -Jimi X BTW: For those of you who do not have my test source, here it is: .text .align 4 .ent _start , 0 .globl _start _start: dla $sp, kernelInfoLocal ld $sp, 0($sp) daddu $sp, $sp, 0x6000 dla $25, crtInit j $25 # NOTREACHED j $31 .end _start From owner-linux-mips@oss.sgi.com Thu Jun 1 15:50:51 2000 Received: by oss.sgi.com id ; Thu, 1 Jun 2000 15:50:32 -0700 Received: from mailhost.uni-koblenz.de ([141.26.64.1]:34042 "EHLO mailhost.uni-koblenz.de") by oss.sgi.com with ESMTP id ; Thu, 1 Jun 2000 15:50:11 -0700 Received: from cacc-14.uni-koblenz.de (cacc-14.uni-koblenz.de [141.26.131.14]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id AAA14777 for ; Fri, 2 Jun 2000 00:50:49 +0200 (MET DST) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 2 Jun 2000 00:50:44 +0200 Date: Fri, 2 Jun 2000 00:50:44 +0200 From: Ralf Baechle To: linux-mips@oss.sgi.com Subject: ADMIN: mailing list moved Message-ID: <20000602005044.C26563@uni-koblenz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Content-Length: 929 Lines: 19 The mailing list linux@engr.sgi.com is moving to linux-mips@oss.sgi.com. I've copied the old subscription list, so there is no need to resubscribe. Archives of the mailing list will be available at http://oss.sgi.com/projects/linux-mips/archive/. Subscriptions are be handled by majordomo@oss.sgi.com. Subscribers of linuxmips@oss.sgi.com - that mailing list was only used for internal purposes, that is to generate mailinglist archives of the old linux@engr.sgi.com list. While subscribing to it was possible it was still a bad idea. While you were receiving all postings to linux@engr.sgi.com most of you were not subscribed to that list and therefore not able to post. Worse, your postings were going only to the handfull of subscribers to that list. Subscriptions to that list have also all been moved over to linux-mips@oss.sgi.com In case of problems please send mail to linux-mips-owner@oss.sgi.com or me. Ralf From owner-linux-mips@oss.sgi.com Thu Jun 1 16:09:41 2000 Received: by oss.sgi.com id ; Thu, 1 Jun 2000 16:09:21 -0700 Received: from mailhost.uni-koblenz.de ([141.26.64.1]:23548 "EHLO mailhost.uni-koblenz.de") by oss.sgi.com with ESMTP id ; Thu, 1 Jun 2000 16:09:12 -0700 Received: from cacc-14.uni-koblenz.de (cacc-14.uni-koblenz.de [141.26.131.14]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id BAA14560 for ; Fri, 2 Jun 2000 01:09:50 +0200 (MET DST) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 2 Jun 2000 01:09:31 +0200 Date: Fri, 2 Jun 2000 01:09:31 +0200 From: Ralf Baechle To: linux-mips@oss.sgi.com Subject: WANTED: 1999 mailing list archives Message-ID: <20000602010931.D26563@uni-koblenz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I had to find that my mailing list archives of linux@engr.sgi.com don't have any mails from June 25 to October 18 of 1999. I'd greatly apprectiate if anybody could supply the missing mails from that time. Thanks, Ralf From owner-linux-mips@oss.sgi.com Thu Jun 1 18:24:03 2000 Received: by oss.sgi.com id ; Thu, 1 Jun 2000 18:23:53 -0700 Received: from mailhost.uni-koblenz.de ([141.26.64.1]:51591 "EHLO mailhost.uni-koblenz.de") by oss.sgi.com with ESMTP id ; Thu, 1 Jun 2000 18:23:36 -0700 Received: from cacc-14.uni-koblenz.de (cacc-14.uni-koblenz.de [141.26.131.14]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id DAA18883 for ; Fri, 2 Jun 2000 03:24:13 +0200 (MET DST) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 2 Jun 2000 03:23:58 +0200 Date: Fri, 2 Jun 2000 03:23:58 +0200 From: Ralf Baechle To: linux-mips@oss.sgi.com Subject: Re: WANTED: 1999 mailing list archives Message-ID: <20000602032358.A28699@uni-koblenz.de> References: <20000602010931.D26563@uni-koblenz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000602010931.D26563@uni-koblenz.de>; from ralf@oss.sgi.com on Fri, Jun 02, 2000 at 01:09:31AM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Jun 02, 2000 at 01:09:31AM +0200, I wrote: > I had to find that my mailing list archives of linux@engr.sgi.com don't > have any mails from June 25 to October 18 of 1999. I'd greatly > apprectiate if anybody could supply the missing mails from that time. Oliver Paukstadt has provided me with the missing mails. As the result we now again have complete archive of list at http://oss.sgi.com/projects/linux-mips/archive/. Thanks Oliver! Ralf From owner-linux-mips@oss.sgi.com Fri Jun 2 07:49:25 2000 Received: by oss.sgi.com id ; Fri, 2 Jun 2000 07:49:16 -0700 Received: from gatekeep.ti.com ([192.94.94.61]:40943 "EHLO gatekeep.ti.com") by oss.sgi.com with ESMTP id ; Fri, 2 Jun 2000 07:49:04 -0700 Received: from dlep7.itg.ti.com ([157.170.134.103]) by gatekeep.ti.com (8.10.1/8.10.1) with ESMTP id e52EnfL26965 for ; Fri, 2 Jun 2000 09:49:41 -0500 (CDT) Received: from dlep7.itg.ti.com (localhost [127.0.0.1]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id JAA02943 for ; Fri, 2 Jun 2000 09:49:33 -0500 (CDT) Received: from dlep4.itg.ti.com (dlep4.itg.ti.com [157.170.188.63]) by dlep7.itg.ti.com (8.9.3/8.9.3) with ESMTP id JAA02928 for ; Fri, 2 Jun 2000 09:49:33 -0500 (CDT) Received: from ti.com (IDENT:jharrell@reddwarf.sc.ti.com [128.247.117.210]) by dlep4.itg.ti.com (8.9.3/8.9.3) with ESMTP id JAA08682 for ; Fri, 2 Jun 2000 09:49:40 -0500 (CDT) Message-ID: <3937C998.5CD7BE81@ti.com> Date: Fri, 02 Jun 2000 08:50:00 -0600 From: Jeff Harrell Organization: Texas Instruments X-Mailer: Mozilla 4.73 [en] (X11; U; Linux 2.2.14-5.0 i686) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@oss.sgi.com Subject: Symbol generation with cross compiler tools Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I would like to run a quick question past this news group. I am seeing problems with symbol generation on the mipsel cross compilation tools. I am using the XRAY debugger with a Macgraigor EJTAG pod on a MIPS R4Kc (jade) core. The XRAY documentation says that it should be able to recognize the symbols in an ELF executable. The mips tools (Cygnus GCC 2.9.x) that is shipped with the development system has no problem generating symbols that the XRAY debugger can recognize. When I attempt to do a similar test with the SGI cross compiler tools, XRAY doesn't recognize any of the symbols. Here are the versions of the cross-compiler tools that I am currently using... binutils-mipsel-linux-2.8.1-1 egcs-mipsel-linux-1.0.3a-1 egcs-c++-mipsel-linux-1.0.3a-1 egcs-libstdc++-mipsel-linux-2.8.0-1 egcs-objc-mipsel-linux-1.0.3a-1 egcs-g77-mipsel-linux-1.0.3a-1 I am using the "-g" command to generate debugging information. I appreciate any information that anyone might have on similar situations. Thank you in advance Jeff Harrell -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Jeff Harrell Work: (801) 619-6104 Broadband Access group/TI jharrell@ti.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From owner-linux-mips@oss.sgi.com Fri Jun 2 08:14:16 2000 Received: by oss.sgi.com id ; Fri, 2 Jun 2000 08:14:06 -0700 Received: from mail.exfo.com ([206.191.88.36]:46859 "EHLO mail.exfo.com") by oss.sgi.com with ESMTP id ; Fri, 2 Jun 2000 08:13:53 -0700 Received: from exfo.com ([172.16.46.216]) by mail.exfo.com (Netscape Messaging Server 3.62) with ESMTP id 755 for ; Fri, 2 Jun 2000 11:13:17 -0400 Message-ID: <3937CFE8.C1248EC0@exfo.com> Date: Fri, 02 Jun 2000 11:16:56 -0400 From: "Philippe Chauvat" X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: fr,en MIME-Version: 1.0 To: Linux Mips Subject: [HELP!: Boot Hardrat Pb] Content-Type: multipart/mixed; boundary="------------69C24E707A31C1F0746D2134" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------69C24E707A31C1F0746D2134 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hello, Hey ! I've successed with BOOTP and DHCP First of all, I've installed the last version of isc DHCP/BOOTP and I've corrected a mistake in my inetd.conf file. So I progress... :-) When my IrixBox boot on my LinuxBox with bootp, something wrong happened: Kernel Panic due to a /tftpboot/pancake mounting problem (pancake is the hostname of IrixBox) I'ld precise that in my inetd.conf, tftp is written like the following line: tftp ..... /usr/sbin/tftp in.tftp /my/local/mount/point So what's about this message (and why) ? What does this directory contain ? Thanks for your help. Philippe --------------69C24E707A31C1F0746D2134 Content-Type: text/x-vcard; charset=us-ascii; name="pchauvat.vcf" Content-Transfer-Encoding: 7bit Content-Description: Card for Philippe Chauvat Content-Disposition: attachment; filename="pchauvat.vcf" begin:vcard n:Chauvat;Philippe tel;work:+1 (418) 683 0913 #3663 x-mozilla-html:FALSE url:www.exfo.com org:Exfo O.E. inc. adr:;;465 Avenue Godin;Vanier;Quebec;G1M 3G7;Canada version:2.1 email;internet:philippe.chauvat@exfo.com title:Manager, Web Tools Deployment fn:Philippe Chauvat end:vcard --------------69C24E707A31C1F0746D2134-- From owner-linux-mips@oss.sgi.com Fri Jun 2 12:31:50 2000 Received: by oss.sgi.com id ; Fri, 2 Jun 2000 12:31:30 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:27920 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 2 Jun 2000 12:30:56 -0700 Received: from kilimanjaro.engr.sgi.com (kilimanjaro.engr.sgi.com [163.154.5.32]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id NAA05377 for ; Fri, 2 Jun 2000 13:35:06 -0700 (PDT) mail_from (wombat@kilimanjaro.engr.sgi.com) Received: from kilimanjaro.engr.sgi.com (localhost [127.0.0.1]) by kilimanjaro.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id NAA65689; Fri, 2 Jun 2000 13:28:59 -0700 (PDT) Message-Id: <200006022028.NAA65689@kilimanjaro.engr.sgi.com> To: Jeff Harrell cc: linux-mips@oss.sgi.com Subject: Re: Symbol generation with cross compiler tools In-reply-to: Your message of "Fri, 02 Jun 2000 08:50:00 MDT." Date: Fri, 02 Jun 2000 13:28:58 -0700 From: Joan Eslinger Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I asked one of the compiler guys, and he said the "SGI cross compilers" are also made by Cygnus. He also said This customer would need to know where in the executable the symbols are read for XRAY and then see if that section exists in the mips targeted executable. In particular, some tools generate .symtab and/or .dynstr sections with symbols, and other tools only read one or the other of those sections. He though you were probably missing a .symtab section in your object. From owner-linux-mips@oss.sgi.com Mon Jun 5 07:51:43 2000 Received: by oss.sgi.com id ; Mon, 5 Jun 2000 07:51:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:57195 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 5 Jun 2000 06:45:30 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA05493; Mon, 5 Jun 2000 07:40:36 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id HAA46755 for linux-list; Mon, 5 Jun 2000 07:33:26 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA98596 for ; Mon, 5 Jun 2000 07:33:11 -0700 (PDT) mail_from (flo@rfc822.org) Received: from noose.gt.owl.de (noose.gt.owl.de [62.52.19.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA02411 for ; Mon, 5 Jun 2000 07:32:55 -0700 (PDT) mail_from (flo@rfc822.org) Received: by noose.gt.owl.de (Postfix, from userid 10) id A1D4880E; Mon, 5 Jun 2000 16:32:45 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 03AE58FA7; Mon, 5 Jun 2000 16:31:06 +0200 (CEST) Date: Mon, 5 Jun 2000 16:31:05 +0200 From: Florian Lohoff To: Scott Thomas Cc: linux@cthulhu.engr.sgi.com Subject: Re: problem with download Message-ID: <20000605163105.D3774@paradigm.rfc822.org> References: <002901bfcb13$63798a30$fe01a8c0@scott.tridsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <002901bfcb13$63798a30$fe01a8c0@scott.tridsys.com>; from scott@tridsys.com on Wed, May 31, 2000 at 11:17:52AM -0400 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, May 31, 2000 at 11:17:52AM -0400, Scott Thomas wrote: > when I try to un-tar it, it chokes since I believe the EOF marker > is missing. I'm in the process of trying the mirror sites, but I was > wondering if anyone else has had this problem, and if so how > did they overcome it? Nope - No problmes here ... > btw, I noticed nothing has been posted to http://www.linux.sgi.com > for over a year. is anyone still working/interested in linux-mips? A lot - and growing - The archives might be out of date. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "Technology is a constant battle between manufacturers producing bigger and more idiot-proof systems and nature producing bigger and better idiots." From owner-linux-mips@oss.sgi.com Mon Jun 5 07:51:44 2000 Received: by oss.sgi.com id ; Mon, 5 Jun 2000 07:51:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:58731 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 5 Jun 2000 06:45:32 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA05501; Mon, 5 Jun 2000 07:40:38 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id HAA73924 for linux-list; Mon, 5 Jun 2000 07:33:32 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA77257 for ; Mon, 5 Jun 2000 07:33:11 -0700 (PDT) mail_from (flo@rfc822.org) Received: from noose.gt.owl.de (noose.gt.owl.de [62.52.19.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA02025 for ; Mon, 5 Jun 2000 07:32:54 -0700 (PDT) mail_from (flo@rfc822.org) Received: by noose.gt.owl.de (Postfix, from userid 10) id CD33180F; Mon, 5 Jun 2000 16:32:45 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 3D9C08FA7; Mon, 5 Jun 2000 16:32:33 +0200 (CEST) Date: Mon, 5 Jun 2000 16:32:33 +0200 From: Florian Lohoff To: Hiroshi Kawashima Cc: linux@cthulhu.engr.sgi.com Subject: Re: Compile speed on SGI/Linux (like Indy) Message-ID: <20000605163233.E3774@paradigm.rfc822.org> References: <200005301752.CAA06812@newsa.net.arch.sony.co.jp> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <200005301752.CAA06812@newsa.net.arch.sony.co.jp>; from kei@arch.sony.co.jp on Wed, May 31, 2000 at 03:15:19AM +0900 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, May 31, 2000 at 03:15:19AM +0900, Hiroshi Kawashima wrote: > I deeply appreciate if anyone suggest me compile time for any source > packages on Indy or other SGI machines. Compile time of any source > packages is very helpful for me. There will be debian-mips and debian-mipsel "Real Soon" - I am working on mipsel and mips with a lot others - Resulting packages (mips and mipsel) can be found at ftp://ftp.rfc822.org/pub/local/debian-mips and mipsel. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "Technology is a constant battle between manufacturers producing bigger and more idiot-proof systems and nature producing bigger and better idiots." From owner-linux-mips@oss.sgi.com Mon Jun 5 07:51:49 2000 Received: by oss.sgi.com id ; Mon, 5 Jun 2000 07:51:31 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:54123 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 5 Jun 2000 06:45:27 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA05485; Mon, 5 Jun 2000 07:40:33 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id HAA83933 for linux-list; Mon, 5 Jun 2000 07:33:22 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA97694 for ; Mon, 5 Jun 2000 07:33:11 -0700 (PDT) mail_from (flo@rfc822.org) Received: from noose.gt.owl.de (noose.gt.owl.de [62.52.19.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA03427 for ; Mon, 5 Jun 2000 07:32:54 -0700 (PDT) mail_from (flo@rfc822.org) Received: by noose.gt.owl.de (Postfix, from userid 10) id 701CA808; Mon, 5 Jun 2000 16:32:45 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 03E768FA7; Mon, 5 Jun 2000 16:29:33 +0200 (CEST) Date: Mon, 5 Jun 2000 16:29:33 +0200 From: Florian Lohoff To: Chris Ruvolo , fisher@sgi.com, linux@cthulhu.engr.sgi.com Subject: Re: Problems booting Indigo... Message-ID: <20000605162933.C3774@paradigm.rfc822.org> References: <200005310410.VAA00290@hollywood.engr.sgi.com> <20000531122527.A26328@lug-owl.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <20000531122527.A26328@lug-owl.de>; from jbglaw@lug-owl.de on Wed, May 31, 2000 at 12:25:27PM +0200 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, May 31, 2000 at 12:25:27PM +0200, Jan-Benedict Glaw wrote: > I hacked the BSD tftpd last night (-> standalone and send from #69) but > you're right. It makes no difference at all. This morning, I played with > the transceiver again -- 2 switches, 4 possibilities. Tested all, but > no success. Some two month ago I booted that Indigo over net (okay, it > crashed immediately;) but the only difference is that we used a switched > port there... It's brain-dead, but I'll fetch a switch from my old school > and test it... It cant be the tftp server etc - Use your brain - We have booted your machine here - Its an ARP problem i guess. And BTW - Use a hub - i had loads of problems booting the decstation and the indigo2 via a switch - Hangs in the middle were completely normal. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "Technology is a constant battle between manufacturers producing bigger and more idiot-proof systems and nature producing bigger and better idiots." From owner-linux-mips@oss.sgi.com Mon Jun 5 08:35:11 2000 Received: by oss.sgi.com id ; Mon, 5 Jun 2000 08:35:02 -0700 Received: from mta03-svc.ntlworld.com ([62.253.162.43]:23969 "EHLO mta03-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Mon, 5 Jun 2000 08:34:49 -0700 Received: from icserver.ichilton.co.uk ([62.252.240.179]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000605163439.NWBA290.mta03-svc.ntlworld.com@icserver.ichilton.co.uk>; Mon, 5 Jun 2000 17:34:39 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.1/8.10.1) with SMTP id e55GWsc05739; Mon, 5 Jun 2000 17:33:20 +0100 From: "Ian Chilton" To: "Florian Lohoff" Cc: "Linux-MIPS Mailing List" Subject: RE: Compile speed on SGI/Linux (like Indy) Date: Mon, 5 Jun 2000 17:32:55 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 In-Reply-To: <20000605163233.E3774@paradigm.rfc822.org> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > There will be debian-mips and debian-mipsel "Real Soon" Please could you explain a little more..? What is the difference between these 2? Thanks! Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Jun 5 09:07:02 2000 Received: by oss.sgi.com id ; Mon, 5 Jun 2000 09:06:52 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:11787 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 5 Jun 2000 09:06:33 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id C011C81D; Mon, 5 Jun 2000 19:06:26 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id B08098FA7; Mon, 5 Jun 2000 19:05:59 +0200 (CEST) Date: Mon, 5 Jun 2000 19:05:59 +0200 From: Florian Lohoff To: Ian Chilton Cc: Linux-MIPS Mailing List Subject: Re: Compile speed on SGI/Linux (like Indy) Message-ID: <20000605190559.B6172@paradigm.rfc822.org> References: <20000605163233.E3774@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from mailinglist@ichilton.co.uk on Mon, Jun 05, 2000 at 05:32:55PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 05, 2000 at 05:32:55PM +0100, Ian Chilton wrote: > Hello, > > > There will be debian-mips and debian-mipsel "Real Soon" > > Please could you explain a little more..? > > What is the difference between these 2? The Endianess - debian-mips is Big Endian - Like the SGI Indy and Indigo2 mipsel is Little Endian like the Digital Decstation and a handful others. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "Technology is a constant battle between manufacturers producing bigger and more idiot-proof systems and nature producing bigger and better idiots." From owner-linux-mips@oss.sgi.com Mon Jun 5 09:45:32 2000 Received: by oss.sgi.com id ; Mon, 5 Jun 2000 09:45:22 -0700 Received: from mta01-svc.ntlworld.com ([62.253.162.41]:63892 "EHLO mta01-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Mon, 5 Jun 2000 09:45:03 -0700 Received: from icserver.ichilton.co.uk ([62.252.238.55]) by mta01-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000605174457.RYMB381.mta01-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Mon, 5 Jun 2000 18:44:57 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.1/8.10.1) with SMTP id e55HfQc06324; Mon, 5 Jun 2000 18:41:26 +0100 From: "Ian Chilton" To: Cc: "Linux-MIPS Mailing List" Subject: RE: Compile speed on SGI/Linux (like Indy) Date: Mon, 5 Jun 2000 18:41:28 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 In-Reply-To: <20000605190559.B6172@paradigm.rfc822.org> Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > The Endianess - debian-mips is Big Endian - Like > the SGI Indy and Indigo2 Is there any documentation on how to install this then? Thanks! Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Tue Jun 6 03:25:03 2000 Received: by oss.sgi.com id ; Tue, 6 Jun 2000 03:24:54 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:62983 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Tue, 6 Jun 2000 03:24:32 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 965EB827; Tue, 6 Jun 2000 12:24:30 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 20EC68FA7; Tue, 6 Jun 2000 12:06:43 +0200 (CEST) Date: Tue, 6 Jun 2000 12:06:43 +0200 From: Florian Lohoff To: Ian Chilton Cc: Linux-MIPS Mailing List Subject: Re: Compile speed on SGI/Linux (like Indy) Message-ID: <20000606120643.B3520@paradigm.rfc822.org> References: <20000605190559.B6172@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from mailinglist@ichilton.co.uk on Mon, Jun 05, 2000 at 06:41:28PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 05, 2000 at 06:41:28PM +0100, Ian Chilton wrote: > Hello, > > > The Endianess - debian-mips is Big Endian - Like > > the SGI Indy and Indigo2 > > > Is there any documentation on how to install this then? They are still incomplete - Important packages are still missing and and there are no "boot images" available - They will be available once we have a complete set of packages and there will be documentation. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "Technology is a constant battle between manufacturers producing bigger and more idiot-proof systems and nature producing bigger and better idiots." From owner-linux-mips@oss.sgi.com Tue Jun 6 05:51:14 2000 Received: by oss.sgi.com id ; Tue, 6 Jun 2000 05:50:55 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:29026 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 6 Jun 2000 05:50:49 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id FAA06064; Tue, 6 Jun 2000 05:55:42 -0700 (PDT) mail_from (owner-linux@cthulhu.engr.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id FAA21187; Tue, 6 Jun 2000 05:50:18 -0700 (PDT) Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id FAA26020 for linux-list; Tue, 6 Jun 2000 05:36:14 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id FAA78931 for ; Tue, 6 Jun 2000 05:35:42 -0700 (PDT) mail_from (jbglaw@ev-stift-gymn.guetersloh.de) Received: from belgarath.esg-guetersloh.mediapoint.de (belgarath.esg-guetersloh.mediapoint.de [193.189.251.50]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id FAA01686 for ; Tue, 6 Jun 2000 05:30:10 -0700 (PDT) mail_from (jbglaw@ev-stift-gymn.guetersloh.de) Received: by belgarath.esg-guetersloh.mediapoint.de (Postfix, from userid 1000) id CD56851341; Tue, 06 Jun 2000 14:30:07 +0200 (CEST) Date: Tue, 6 Jun 2000 14:30:07 +0200 From: Jan-Benedict Glaw To: linux@cthulhu.engr.sgi.com Subject: Re: Problems booting Indigo... Message-ID: <20000606143007.G17656@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux@engr.sgi.com References: <200005310410.VAA00290@hollywood.engr.sgi.com> <20000531122527.A26328@lug-owl.de> <20000605162933.C3774@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="yQbNiKLmgenwUfTN" X-Mailer: Mutt 1.0i In-Reply-To: <20000605162933.C3774@paradigm.rfc822.org>; from flo@rfc822.org on Mon, Jun 05, 2000 at 04:29:33PM +0200 X-Operating-System: Linux belgarath.esg-guetersloh.mediapoint.de 2.0.35 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --yQbNiKLmgenwUfTN Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Mon, Jun 05, 2000 at 04:29:33PM +0200, Florian Lohoff wrote: > On Wed, May 31, 2000 at 12:25:27PM +0200, Jan-Benedict Glaw wrote: > > I hacked the BSD tftpd last night (-> standalone and send from #69) but > > you're right. It makes no difference at all. This morning, I played with > > the transceiver again -- 2 switches, 4 possibilities. Tested all, but > > no success. Some two month ago I booted that Indigo over net (okay, it > > crashed immediately;) but the only difference is that we used a switched > > port there... It's brain-dead, but I'll fetch a switch from my old scho= ol > > and test it... >=20 > It cant be the tftp server etc - Use your brain - We have booted > your machine here - Its an ARP problem i guess.=20 =2E..and on which side? TFTP server hat Indigo's ARP address statically set - without I can't even see the tftp request... > And BTW - Use a hub - i had loads of problems booting the > decstation and the indigo2 via a switch - Hangs in the middle > were completely normal. =2EoO( If I only would reach the middle ) MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --yQbNiKLmgenwUfTN Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.1 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEAREBAAYFAjk87s8ACgkQHb1edYOZ4bu8VgCfQeeYi7OO4Pzb1ZT3tWAKefUy 4KUAn3LnA1W6b7AapRURhzLAd79K1pMQ =iIHT -----END PGP SIGNATURE----- --yQbNiKLmgenwUfTN-- From owner-linux-mips@oss.sgi.com Thu Jun 8 13:30:16 2000 Received: by oss.sgi.com id ; Thu, 8 Jun 2000 13:30:07 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:55672 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 8 Jun 2000 13:29:59 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id NAA16863 for ; Thu, 8 Jun 2000 13:24:59 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id QAA28750 for ; Thu, 8 Jun 2000 16:23:26 -0300 Date: Thu, 8 Jun 2000 16:23:26 -0300 From: "J. Scott Kasten" To: linux-mips@oss.sgi.com Subject: Linux on Indy w/ XL question. Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I need to puchase an Indy and install Linux on it as a development/reference platform for some embedded MIPS development I'm involved with. I've read the FAQ, HOWTO, etc... and need one minor clarification. In the documentation it claims support for XL video only. That's fine, however, do I want the 8 bit or the 24 bit variety? Do they both work? If I understand correctly, emulation is in place to the extent that the IRIX Xsgi can be used under Linux to provide an X display as well? X is not critical to my needs, but would of course be a definite advantage. Thanks in advance! -- J. Scott Kasten Email: jsk AT tetracon-eng DOT net "The only future you have is the one you choose to make for yourself..." From owner-linux-mips@oss.sgi.com Thu Jun 8 16:21:28 2000 Received: by oss.sgi.com id ; Thu, 8 Jun 2000 16:21:19 -0700 Received: from mailhost.uni-koblenz.de ([141.26.64.1]:30629 "EHLO mailhost.uni-koblenz.de") by oss.sgi.com with ESMTP id ; Thu, 8 Jun 2000 16:21:02 -0700 Received: from cacc-23.uni-koblenz.de (cacc-23.uni-koblenz.de [141.26.131.23]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id BAA07040; Fri, 9 Jun 2000 01:20:57 +0200 (MET DST) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 9 Jun 2000 01:20:29 +0200 Date: Fri, 9 Jun 2000 01:20:29 +0200 From: Ralf Baechle To: "J. Scott Kasten" Cc: linux-mips@oss.sgi.com Subject: Re: Linux on Indy w/ XL question. Message-ID: <20000609012029.B19237@uni-koblenz.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from jsk@tetracon-eng.net on Thu, Jun 08, 2000 at 04:23:26PM -0300 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 08, 2000 at 04:23:26PM -0300, J. Scott Kasten wrote: > I need to puchase an Indy and install Linux on it as a > development/reference platform for some embedded MIPS development I'm > involved with. I've read the FAQ, HOWTO, etc... and need one minor > clarification. > > In the documentation it claims support for XL video only. That's fine, > however, do I want the 8 bit or the 24 bit variety? Do they both work? For text console, yes. > If I understand correctly, emulation is in place to the extent that the > IRIX Xsgi can be used under Linux to provide an X display as well? X is > not critical to my needs, but would of course be a definite advantage. Nobody has worked on the binary compatibility for X in a long, long time so everything I can guarantee is that it compiles. It's never reached the point where Xsgi was running properly. There is now another X server based on XFree 4.0. It's just the first public release but you may want to try it anyway, it's available from oss.sgi.com in /pub/linux/mips/mips-linux/X. Ralf From owner-linux-mips@oss.sgi.com Thu Jun 8 17:09:50 2000 Received: by oss.sgi.com id ; Thu, 8 Jun 2000 17:09:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:3412 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 8 Jun 2000 17:09:08 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id RAA16149; Thu, 8 Jun 2000 17:04:11 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id UAA29031; Thu, 8 Jun 2000 20:01:55 -0300 Date: Thu, 8 Jun 2000 20:01:55 -0300 From: "J. Scott Kasten" To: Ralf Baechle cc: linux-mips@oss.sgi.com Subject: Re: Linux on Indy w/ XL question. In-Reply-To: <20000609012029.B19237@uni-koblenz.de> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 9 Jun 2000, Ralf Baechle wrote: > On Thu, Jun 08, 2000 at 04:23:26PM -0300, J. Scott Kasten wrote: > > In the documentation it claims support for XL video only. That's fine, > > however, do I want the 8 bit or the 24 bit variety? Do they both work? > > For text console, yes. > Thanks for your responce. The info about the Xfree 4.0 derivative is useful. Now, I take your "yes" responce to the above to mean that both varieties work for text. -S- From owner-linux-mips@oss.sgi.com Fri Jun 9 06:40:43 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 06:40:34 -0700 Received: from mta02-svc.ntlworld.com ([62.253.162.42]:20943 "EHLO mta02-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 06:40:09 -0700 Received: from icserver.ichilton.co.uk ([62.252.236.211]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000609143943.BLQE10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Fri, 9 Jun 2000 14:39:43 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e59DdIN01351; Fri, 9 Jun 2000 14:39:22 +0100 From: "Ian Chilton" To: "Guido Guenther" , "Ralf Baechle" Cc: "Linux-MIPS Mailing List" Subject: Linux on Indy Date: Fri, 9 Jun 2000 14:39:20 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000527134830.A4057@bert.physik.uni-konstanz.de> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, OK...I now have a 2nd disk in my Indy. I have read the MIPS/HOWTO, the SGI/Linux mini-HOWTO (by: Raju) and the Hard Hat 5.1 installation instructions, but I still haven't got a clue how to do this.... I have an SGI Indy running Irix 6.5.8m (now with a 2nd hard disk). I also have a PC running Win98 and another running SuSE Linux. I have got the hardhat-sgi-5.1tar.gz file...can't I just copy this to the Indy while running IRIX, and unpack from there? Please could someone explain how I do this? (incl partitioning this new disk for Linux...I ran fx, but didn't have a clue how to use it...) Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 9 07:38:52 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 07:38:42 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:3144 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 07:38:39 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id HAA24144 for ; Fri, 9 Jun 2000 07:33:41 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id KAA01171; Fri, 9 Jun 2000 10:31:05 -0300 Date: Fri, 9 Jun 2000 10:31:05 -0300 From: "J. Scott Kasten" To: Ian Chilton cc: Linux-MIPS Mailing List Subject: Re: Linux on Indy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Let's try and keep this discussion on the list as I'm going to be trying the same thing in a few weeks. >From what I have observed, the 5.1 tarball has under the mipseb directory a minimal root file system with etc, sbin, lib, etc. in addition to the RedHat/RPMS directory. I suspect that you will need to get that minimal root file system mounted, and then use that to run the install and explode the RPMS to the disk. I'm further going to speculate that you will probably netboot the thing the first time and do an NFS mounted root to make that happen. But again, this is pure speculation... -S- -- J. Scott Kasten Email: jsk AT tetracon-eng DOT net "The only future you have is the one you choose to make for yourself..." On Fri, 9 Jun 2000, Ian Chilton wrote: > Hello, > > OK...I now have a 2nd disk in my Indy. I have read the MIPS/HOWTO, the > SGI/Linux mini-HOWTO (by: Raju) and the Hard Hat 5.1 installation > instructions, but I still haven't got a clue how to do this.... > > I have an SGI Indy running Irix 6.5.8m (now with a 2nd hard disk). > I also have a PC running Win98 and another running SuSE Linux. > > I have got the hardhat-sgi-5.1tar.gz file...can't I just copy this to the > Indy while running IRIX, and unpack from there? > > Please could someone explain how I do this? > (incl partitioning this new disk for Linux...I ran fx, but didn't have a > clue how to use it...) > > > Thanks! > > > Bye for Now, > > Ian > > > \|||/ > (o o) > /----------------ooO-(_)-Ooo----------------\ > | Ian Chilton | > | E-Mail : ian@ichilton.co.uk | > \-------------------------------------------/ > > From owner-linux-mips@oss.sgi.com Fri Jun 9 08:53:03 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 08:52:53 -0700 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.30]:28200 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 08:52:42 -0700 Received: from bert.physik.uni-konstanz.de [134.34.144.20] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 130R3M-0007L7-00; Fri, 9 Jun 2000 17:50:36 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Fri, 9 Jun 2000 17:46:35 +0200 Date: Fri, 9 Jun 2000 17:46:35 +0200 From: Guido Guenther To: "J. Scott Kasten" Cc: Ian Chilton , Linux-MIPS Mailing List Subject: Re: Linux on Indy Message-ID: <20000609174635.A25844@bert.physik.uni-konstanz.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i In-Reply-To: ; from jsk@tetracon-eng.net on Fri, Jun 09, 2000 at 10:31:05AM -0300 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Jun 09, 2000 at 10:31:05AM -0300, J. Scott Kasten wrote: > [..snip..] > >From what I have observed, the 5.1 tarball has under the mipseb directory > a minimal root file system with etc, sbin, lib, etc. in addition to the > RedHat/RPMS directory. I suspect that you will need to get that minimal > root file system mounted, and then use that to run the install and explode > the RPMS to the disk. I'm further going to speculate that you will > probably netboot the thing the first time and do an NFS mounted root to > make that happen. But again, this is pure speculation... That's the way to go. As far as I remember the hardhat installer fires up automatically when you mount the rootfs per nfs. It will create a fs on the disk and unpack the rpms. As I did that, most of the scripts failed so I had to fix up some things by hand(the mailing list archive is a good read on that). I wrote a short description of what I did after the hardhat installer finished: http://honk.physik.uni-konstanz.de/~agx/mipslinux/install/fix-install.txt I partitioned the disk from within irix but I can't remember that cryptic irix device names. Recently someone posted about a mini-distro he built(search the archives on that). This one might be easier to install than hardhat. Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Fri Jun 9 09:07:32 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 09:07:23 -0700 Received: from mta01-svc.ntlworld.com ([62.253.162.41]:10237 "EHLO mta01-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 09:07:11 -0700 Received: from icserver.ichilton.co.uk ([62.252.237.138]) by mta01-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000609160709.KSNL381.mta01-svc.server.ntlworld.com@icserver.ichilton.co.uk> for ; Fri, 9 Jun 2000 17:07:09 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e59G53N02255 for ; Fri, 9 Jun 2000 17:05:03 +0100 From: "Ian Chilton" To: "Linux-MIPS Mailing List" Subject: RE: Linux on Indy Date: Fri, 9 Jun 2000 17:05:05 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000609174635.A25844@bert.physik.uni-konstanz.de> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > I suspect that you will need to get that minimal > root file system mounted, and then use that to run the install > and explode the RPMS to the disk eakkK! Sorry to be a pain..but is there anyone that wouldn't mind spening a few mins just to list the commands that I would use to do this... I have been using Windoze and Linux for years, but am *completely* new to SGI/Indy's and IRIX. I don't even have a clue how to partition use the 2nd hard disk I have put in.... HELP! Thanks Again! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 9 10:03:32 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 10:03:23 -0700 Received: from zebedee.workpc.tds.net ([204.246.4.99]:57604 "EHLO zebedee.workpc.tds.net") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 10:03:03 -0700 Received: (from usrkkw@localhost) by zebedee.workpc.tds.net (8.9.3/8.9.3) id MAA01046; Fri, 9 Jun 2000 12:01:46 GMT (envelope-from maildrop) Date: Fri, 9 Jun 2000 12:01:46 +0000 From: Ken Wills To: Ian Chilton Cc: linux-mips@oss.sgi.com Subject: Re: Linux on Indy Message-ID: <20000609120146.A1019@zebedee.workpc.tds.net> References: <20000609174635.A25844@bert.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from mailinglist@ichilton.co.uk on Fri, Jun 09, 2000 at 05:05:05PM +0100 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing * Ian Chilton [000609 11:07]: > eakkK! > > Sorry to be a pain..but is there anyone that wouldn't mind spening a few > mins just to list the commands that I would use to do this... > > I have been using Windoze and Linux for years, but am *completely* new to > SGI/Indy's and IRIX. > I don't even have a clue how to partition use the 2nd hard disk I have put > in.... > There are a couple of docs on http://www.linux.sgi.com that describe how to install Linux on an Indy. If you don't know the device names under irix, user the system manager to install and partition your new disk - then you'll see it's device name in the disk-manager app thingy - after that, a few minutes with 'fx' and 'man fx' should be sufficient, or you can consult a copy of Frisch's 'Essential System Administraton' (O'Reilly) for a step by step on adding disks under Irix. The linux installer is capable of partitioning your disk too, AFAIR, use fdisk though, and not disk druid. Hope that helps a little, Ken From owner-linux-mips@oss.sgi.com Fri Jun 9 11:00:12 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 11:00:03 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:18977 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 10:59:49 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id KAA22617 for ; Fri, 9 Jun 2000 10:54:52 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id NAA01543; Fri, 9 Jun 2000 13:52:49 -0300 Date: Fri, 9 Jun 2000 13:52:49 -0300 From: "J. Scott Kasten" To: Ian Chilton cc: Linux-MIPS Mailing List Subject: RE: Linux on Indy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 9 Jun 2000, Ian Chilton wrote: > eakkK! > > Sorry to be a pain..but is there anyone that wouldn't mind spening a few > mins just to list the commands that I would use to do this... Actually, net booting is not as hard or as bad as it sounds. Typically, you'll need utilities like rarp, bootp/dhcp, bootparamd, tftp, and NFS to pull it off. I've not gone through the process first hand yet with an SGI, but from what I've glanced at somewhere here in the docs it looks to be slightly different from what a Sun does. I know this will sound strange, but go to www.netbsd.org and look at their docs on net booting Sun boxes to do a network install of NetBSD. Their docs are quite thurough on how to set up tftp, rarp, etc on BSD and Linux servers for net booting a Sun client. Although some of the details will be different for an SGI client, the docs are still invaluable to you as they describe how to edit the configuration files on the server to get what you want. Comming from the Bill's world, it will also help give you a basic understanding of how the process works so you'll know better what questions to ask if you do get stuck. From owner-linux-mips@oss.sgi.com Fri Jun 9 13:13:34 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 13:13:24 -0700 Received: from mta03-svc.ntlworld.com ([62.253.162.43]:46791 "EHLO mta03-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 13:13:12 -0700 Received: from icserver.ichilton.co.uk ([62.252.238.188]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000609201306.HNZG290.mta03-svc.ntlworld.com@icserver.ichilton.co.uk>; Fri, 9 Jun 2000 21:13:06 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e59KALN03847; Fri, 9 Jun 2000 21:10:23 +0100 From: "Ian Chilton" To: "Ken Wills" Cc: Subject: RE: Linux on Indy Date: Fri, 9 Jun 2000 21:10:25 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000609120146.A1019@zebedee.workpc.tds.net> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > If you don't know the device names under irix, > user the system manager to install and partition your new disk - > then you'll see it's device name in the disk-manager app thingy When I go into Disk Manager, I only see SystemDisk(0,1) 4.04GB, which is my normal IRIX disk......does this mean my 2nd disk isn't working? The 2nd disk I put in was a 1GB, straight out of my Linux box, still with an EXT2 partition on....does this matter? Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 9 15:55:45 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 15:55:35 -0700 Received: from mta02-svc.ntlworld.com ([62.253.162.42]:32203 "EHLO mta02-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 15:55:19 -0700 Received: from icserver.ichilton.co.uk ([62.252.237.236]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000609235453.EEHR10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Fri, 9 Jun 2000 23:54:53 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e59MrkN04819; Fri, 9 Jun 2000 23:53:46 +0100 From: "Ian Chilton" To: "Ken Wills" Cc: "Linux-MIPS Mailing List" Subject: RE: Linux on Indy Date: Fri, 9 Jun 2000 23:53:51 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000609161436.A2098@zebedee.workpc.tds.net> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, OK...got the 2nd hard disk (/dev/dsk/dsk0d2s7) initialised and mounted (every time at boot) into /hd2 by using System Manager.. Now, do I copy the hardhat tar.gz file to the Indy, and un-tar it into this directory?? Am I correct? Then what? Sorry to be a pain......i'm looking at the hardhat instructions now, and they are not making much sense :( Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 9 18:35:37 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 18:35:17 -0700 Received: from serak.svc.tds.net ([204.246.1.5]:13456 "EHLO serak.svc.tds.net") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 18:34:55 -0700 Received: from spanky.yaberk.int (root@mawi0pool1-a31.madison.tds.net [204.71.148.32]) by serak.svc.tds.net (8.9.3/8.9.3) with ESMTP id UAA03981; Fri, 9 Jun 2000 20:33:31 -0500 (CDT) Received: (from kenwills@localhost) by spanky.yaberk.int (8.9.3/8.9.3) id UAA00973; Fri, 9 Jun 2000 20:30:46 -0500 (CDT) (envelope-from kenwills) Date: Fri, 9 Jun 2000 20:30:44 -0500 From: Ken Wills To: Ian Chilton Cc: linux-mips@oss.sgi.com Subject: Re: Linux on Indy Message-ID: <20000609203044.A774@spanky.yaberk.int> References: <20000609161436.A2098@zebedee.workpc.tds.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from mailinglist@ichilton.co.uk on Fri, Jun 09, 2000 at 11:53:51PM +0100 X-Mailer: Mutt http://www.mutt.org/ Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > OK...got the 2nd hard disk (/dev/dsk/dsk0d2s7) initialised and mounted > (every time at boot) into /hd2 by using System Manager.. OK - Great you found your device names. Now you can (a) play with fx a bit so you understand how that side of things works, and repartition your disk in preperation for the installation, or (b) use the linux fdisk to set up your partitions when the install begins. > > Now, do I copy the hardhat tar.gz file to the Indy, and un-tar it into this > directory?? > Am I correct? No - you untar the hardhat tarfile to your nfsroot directory on the machine that will act as your nfs server. Follow the instructions on setting up bootpd etc. Then boot your indy to a prom and do: boot bootp():vmlinux ... (rest of installation instructions.) > > Then what? If you've set up everything correctly, you'll tftp the kernel from your server, mount your root fs over nfs, and the redhat installer will start. > > Sorry to be a pain......i'm looking at the hardhat instructions now, and > they are not making much sense :( You should start by setting up bootp/tftp/nfs on the machine that will serve the installation image to the indy. Ken -- Ken Wills kenwills@tds.net From owner-linux-mips@oss.sgi.com Fri Jun 9 19:16:37 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 19:16:28 -0700 Received: from mta03-svc.ntlworld.com ([62.253.162.43]:54776 "EHLO mta03-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 19:16:07 -0700 Received: from icserver.ichilton.co.uk ([62.252.236.16]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000610021605.IUGS290.mta03-svc.ntlworld.com@icserver.ichilton.co.uk>; Sat, 10 Jun 2000 03:16:05 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5A2FGN06576; Sat, 10 Jun 2000 03:15:16 +0100 From: "Ian Chilton" To: "Ken Wills" Cc: "Linux-MIPS Mailing List" Subject: RE: Linux on Indy Date: Sat, 10 Jun 2000 03:15:22 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000609203044.A774@spanky.yaberk.int> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > use the linux fdisk to set up your partitions when the install begins. Oh..drat, so I need to remove that partition again, now I know it works.. > No - you untar the hardhat tarfile to your nfsroot directory on > the machine > that will act as your nfs server. Follow the instructions on setting up > bootpd etc. Then boot your indy to a prom and do: > boot bootp():vmlinux ... (rest of installation instructions.) Right....i'll try tomorrow! > If you've set up everything correctly, you'll tftp the kernel from your > server, mount your root fs over nfs, and the redhat installer will start. Is the kernel in the hardhat distro? > You should start by setting up bootp/tftp/nfs on the machine that will > serve the installation image to the indy. Right...i'll have ago!! Where do I get bootp/tftp from ? BTW: is anyone on ICQ/IRC that knows how to do this?? Thanks Again! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 9 20:22:57 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 20:22:47 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:47476 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 20:22:20 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id UAA29657 for ; Fri, 9 Jun 2000 20:17:24 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id XAA02713; Fri, 9 Jun 2000 23:13:28 -0300 Date: Fri, 9 Jun 2000 23:13:28 -0300 From: "J. Scott Kasten" To: Ian Chilton cc: linux-mips@oss.sgi.com Subject: RE: Linux on Indy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 9 Jun 2000, Ian Chilton wrote: > When I go into Disk Manager, I only see SystemDisk(0,1) 4.04GB, which is my > normal IRIX disk......does this mean my 2nd disk isn't working? > > The 2nd disk I put in was a 1GB, straight out of my Linux box, still with an > EXT2 partition on....does this matter? > Yes, it does. IRIX won't like the Linux partition table one bit. The simplest thing to do would be to stick it in the linux box and do this: dd if=/dev/zero of=/dev/sd# bs=512 count=10 Where /dev/sd# is the SCSI device, IE /dev/sdb, /dev/sdc, etc... Don't use a name with a numeric suffix or you'll just zap the partition, not the partition table itself. However, IRIX should have seen the drive regardless, but would have told you it could not create a file system on it or some such thing, so there's still the possibility something is not in place right here. From owner-linux-mips@oss.sgi.com Fri Jun 9 20:40:58 2000 Received: by oss.sgi.com id ; Fri, 9 Jun 2000 20:40:48 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:17019 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 9 Jun 2000 20:40:21 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id UAA01096 for ; Fri, 9 Jun 2000 20:35:24 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id XAA02748; Fri, 9 Jun 2000 23:33:00 -0300 Date: Fri, 9 Jun 2000 23:33:00 -0300 From: "J. Scott Kasten" To: Ian Chilton cc: Linux-MIPS Mailing List Subject: RE: Linux on Indy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > You should start by setting up bootp/tftp/nfs on the machine that will > > serve the installation image to the indy. > > Right...i'll have ago!! > > Where do I get bootp/tftp from ? OK, let's step back here just a bit to clarify things. You'll have two machines. The Indy to which you wish to install Linux, and a second machine such as an x86, or anything really, that is already running Linux, BSD, or some such thing. The second machine is only needed for the actuall install, to help the Indy get up and going. You'll set up bootp, tftp, and NFS on that second machine. It will be the boot server. Using bootp protocol, the Indy will "discover" the name of the boot server and the kernel file it needs to load. The Indy will then use the tftp protocol to download the boot strap kernel image from the server. (tftp is similar to ftp, but is dumbed down so it can be put in ROM code) After the kernel is started, it's first instruction is to attempt to mount a temporary root file system. The big tarball holds this file system. Your boot server will export this using NFS, and the Indy will mount it as if it were a local disk. It will then mount the real disk under that and then start exploding the RPMS from the root image to the real disk. The bootp and tftp server daemons are included in most Linux and BSD distros. You'll find the man pages under bootpd and tftpd - appending a 'd' to mean server daemon rather than the client. The configuration files will be in /etc. You can do a man on the configuration file names themselves to get even more info. If you're still stuck, don't forget to check out those NetBSD net install help pages I mentioned earlier as they explain and give examples of the type of stuff that goes into those files for both Linux and BSD. From owner-linux-mips@oss.sgi.com Sat Jun 10 05:13:51 2000 Received: by oss.sgi.com id ; Sat, 10 Jun 2000 05:13:30 -0700 Received: from mta03-svc.ntlworld.com ([62.253.162.43]:51888 "EHLO mta03-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Sat, 10 Jun 2000 05:13:08 -0700 Received: from icserver.ichilton.co.uk ([62.252.241.64]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000610121306.KDAO290.mta03-svc.ntlworld.com@icserver.ichilton.co.uk>; Sat, 10 Jun 2000 13:13:06 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5ACCHN08982; Sat, 10 Jun 2000 13:12:18 +0100 From: "Ian Chilton" To: Cc: "Linux-MIPS Mailing List" Subject: Can't find | Date: Sat, 10 Jun 2000 13:12:17 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have recently bought an Indy, but didn't get a keyboard with it, so I plugged a standard UK PS/2 keyboard in. All works well, except the | (pipe). The key that's labelled ¦ (Left of the Z key) normally does | In Windows, If you do CTRL-ALT and the key left of 1, it shows ¦ But, on the Indy I can only get the ¦ character, and can't find the | anywhere, which is annoying, because the | is useful / essential in UNIX. I have it set for UK keyboard in the Maintence section on boot, and in IRIX itself.... Anyone have any ideas? Getting a bit desperate! Thanks! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ian@ichilton.co.uk | |-----------------------------------------------------------------| | Backup E-Mail --> ian@ichilton.dhis.org ICQ #: 16007717 | | Mobile Phone (MAX 150 Chars!) --> ianchilton@sms.genie.co.uk | |-----------------------------------------------------------------| | http://www.ianchilton.co.uk --> Main Page | | http://www.ichilton.co.uk --> Own Web Server (When Online) | |-----------------------------------------------------------------| | "Unix is user friendly - it's just picky about it's friends." | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Sat Jun 10 09:22:32 2000 Received: by oss.sgi.com id ; Sat, 10 Jun 2000 09:22:22 -0700 Received: from mta02-svc.ntlworld.com ([62.253.162.42]:59095 "EHLO mta02-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Sat, 10 Jun 2000 09:22:08 -0700 Received: from icserver.ichilton.co.uk ([62.252.238.115]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000610172141.HECJ10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Sat, 10 Jun 2000 17:21:41 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5AGK7N10695; Sat, 10 Jun 2000 17:20:07 +0100 From: "Ian Chilton" To: "J. Scott Kasten" Cc: "Linux-MIPS Mailing List" Subject: RE: Linux on Indy Date: Sat, 10 Jun 2000 17:20:08 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > OK, let's step back here just a bit to clarify things. Thanks for that...it makes this much more clearer!!! Jumping ahead a bit...when I get hardhat running, can I download the source for all the updated pacages, like GCC 2.95.2, GLIBC 2.1.3 and make, binutils etc etc, and compile them from source like you can with Linux on a PC, or won't that work with this platform? Thanks Again! Bye for Now, Ian \|||/ (o o) /---------------------------ooO-(_)-Ooo---------------------------\ | Ian Chilton (IRC Nick - GadgetMan) ian@ichilton.co.uk | |-----------------------------------------------------------------| | Backup E-Mail --> ian@ichilton.dhis.org ICQ #: 16007717 | | Mobile Phone (MAX 150 Chars!) --> ianchilton@sms.genie.co.uk | |-----------------------------------------------------------------| | http://www.ianchilton.co.uk --> Main Page | | http://www.ichilton.co.uk --> Own Web Server (When Online) | |-----------------------------------------------------------------| | "Unix is user friendly - it's just picky about it's friends." | \-----------------------------------------------------------------/ From owner-linux-mips@oss.sgi.com Sat Jun 10 11:08:12 2000 Received: by oss.sgi.com id ; Sat, 10 Jun 2000 11:08:03 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:9221 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Sat, 10 Jun 2000 11:07:49 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id LAA17718; Sat, 10 Jun 2000 11:07:22 -0700 Date: Sat, 10 Jun 2000 11:07:22 -0700 From: Keith M Wesolowski To: Ian Chilton Cc: "J. Scott Kasten" , Linux-MIPS Mailing List Subject: Re: Linux on Indy Message-ID: <20000610110722.A17647@chem.unr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from mailinglist@ichilton.co.uk on Sat, Jun 10, 2000 at 05:20:08PM +0100 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Jun 10, 2000 at 05:20:08PM +0100, Ian Chilton wrote: > Jumping ahead a bit...when I get hardhat running, can I download the source > for all the updated pacages, like GCC 2.95.2, GLIBC 2.1.3 and make, binutils > etc etc, and compile them from source like you can with Linux on a PC, or > won't that work with this platform? You cannot use glibc 2.1 on mips. I'm pretty sure gcc 2.95.2 doesn't work either. EGCS 1.1.2 with patches works mostly ok, as does 2.96 from cvs. Binutils, flip a coin. The 000425 snapshot works fine for me with a patch you can get from oss.sgi.com or ftp.foobazco.org. Somebody reported that they had 000524 mostly working as well. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Sat Jun 10 15:19:22 2000 Received: by oss.sgi.com id ; Sat, 10 Jun 2000 15:19:02 -0700 Received: from mailhost.uni-koblenz.de ([141.26.64.1]:13819 "EHLO mailhost.uni-koblenz.de") by oss.sgi.com with ESMTP id ; Sat, 10 Jun 2000 15:18:59 -0700 Received: from cacc-27.uni-koblenz.de (cacc-27.uni-koblenz.de [141.26.131.27]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id AAA16401; Sun, 11 Jun 2000 00:18:54 +0200 (MET DST) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 10 Jun 2000 04:48:58 +0200 Date: Sat, 10 Jun 2000 04:48:58 +0200 From: Ralf Baechle To: Ian Chilton Cc: Ken Wills , Linux-MIPS Mailing List Subject: Re: Linux on Indy Message-ID: <20000610044857.B23846@uni-koblenz.de> References: <20000609203044.A774@spanky.yaberk.int> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from mailinglist@ichilton.co.uk on Sat, Jun 10, 2000 at 03:15:22AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Jun 10, 2000 at 03:15:22AM +0100, Ian Chilton wrote: > BTW: is anyone on ICQ/IRC that knows how to do this?? Checkout irc.openprojects.net, #linuxnewbies or #mipslinux. Despite of the name plenty of gurus around. Ralf From owner-linux-mips@oss.sgi.com Sat Jun 10 19:27:03 2000 Received: by oss.sgi.com id ; Sat, 10 Jun 2000 19:26:43 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:5661 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 10 Jun 2000 19:26:22 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id TAA17566 for ; Sat, 10 Jun 2000 19:21:20 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id WAA04673; Sat, 10 Jun 2000 22:19:39 -0300 Date: Sat, 10 Jun 2000 22:19:39 -0300 From: "J. Scott Kasten" To: Ian Chilton cc: Linux-MIPS Mailing List Subject: RE: Linux on Indy In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Jumping ahead a bit...when I get hardhat running, can I download the source > for all the updated pacages, like GCC 2.95.2, GLIBC 2.1.3 and make, binutils > etc etc, and compile them from source like you can with Linux on a PC, or > won't that work with this platform? > In general, you should be able to compile and install the majority of things like normal. I won't guarantee that you won't find something once in a while that breaks, but that's normal on a relatively new and untested platform. From owner-linux-mips@oss.sgi.com Sun Jun 11 03:38:38 2000 Received: by oss.sgi.com id ; Sun, 11 Jun 2000 03:38:28 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:37933 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 11 Jun 2000 03:38:16 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id DAA12220 for ; Sun, 11 Jun 2000 03:33:19 -0700 (PDT) mail_from (indy.j@worldonline.cz) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id DAA33790 for ; Sun, 11 Jun 2000 03:37:50 -0700 (PDT) mail_from (indy.j@worldonline.cz) Received: from smtp.worldonline.cz (smtp-1.worldonline.cz [195.146.100.76]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id DAA01675 for ; Sun, 11 Jun 2000 03:37:49 -0700 (PDT) mail_from (indy.j@worldonline.cz) Received: from pingu (IDENT:root@ppp71.plzen.worldonline.cz [212.11.110.75]) by smtp.worldonline.cz (8.9.3 (WOL 1.2)/8.9.3) with SMTP id MAA20605 for ; Sun, 11 Jun 2000 12:37:16 +0200 (MET DST) From: Jiri "Kasi" Kastner Reply-To: indy.j@worldonline.cz To: linux@cthulhu.engr.sgi.com Subject: i'm not able compile new kernel Date: Sun, 11 Jun 2000 11:40:12 +0200 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <00061112164900.01364@pingu> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I downloaded kernel source from ftp://ftp.linux.sgi.com/.../v2.3/ make menuconfig, make dep, this is OK, but when I try make zImage I always get this error output: /usr/src/linux/include/linux/sched.h: In function `on_sig_stack': In file included from /usr/src/linux/include/linux/mm.h:4, from /usr/src/linux/include/linux/slab.h:14, from /usr/src/linux/include/linux/malloc.h:4, from /usr/src/linux/include/linux/proc_fs.h:5, from init/main.c:15: /usr/src/linux/include/linux/sched.h:566: `current' undeclared (first use this function) /usr/src/linux/include/linux/sched.h:566: (Each undeclared identifier is reported only once /usr/src/linux/include/linux/sched.h:566: for each function it appears in.) /usr/src/linux/include/linux/sched.h:567: warning: control reaches end of non-void function /usr/src/linux/include/linux/sched.h: In function `sas_ss_flags': /usr/src/linux/include/linux/sched.h:571: `current' undeclared (first use this function) /usr/src/linux/include/linux/sched.h:573: warning: control reaches end of non-void function /usr/src/linux/include/linux/sched.h: In function `suser': /usr/src/linux/include/linux/sched.h:596: `current' undeclared (first use this function) /usr/src/linux/include/linux/sched.h: In function `fsuser': /usr/src/linux/include/linux/sched.h:605: `current' undeclared (first use this function) /usr/src/linux/include/linux/sched.h: In function `capable': /usr/src/linux/include/linux/sched.h:621: `current' undeclared (first use this function) /usr/src/linux/include/linux/mm.h: In function `expand_stack': In file included from /usr/src/linux/include/linux/slab.h:14, from /usr/src/linux/include/linux/malloc.h:4, from /usr/src/linux/include/linux/proc_fs.h:5, from init/main.c:15: /usr/src/linux/include/linux/mm.h:406: `current' undeclared (first use this function) init/main.c: In function `start_kernel': init/main.c:536: `current' undeclared (first use this function) init/main.c: In function `do_basic_setup': init/main.c:597: `current' undeclared (first use this function) make: *** [init/main.o] Error 1 I would like to compile new kernel on indy (hardhat 5.1). Can anybody write to me what is wrong? My indy is MIPS4600 (IP22), XL-8 bit graphics, vino, IndyCam, soundcard. Thanks Jiri. From owner-linux-mips@oss.sgi.com Sun Jun 11 03:52:38 2000 Received: by oss.sgi.com id ; Sun, 11 Jun 2000 03:52:28 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:59184 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 11 Jun 2000 03:52:03 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id DAA12747 for ; Sun, 11 Jun 2000 03:46:37 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id DAA60883 for ; Sun, 11 Jun 2000 03:49:46 -0700 (PDT) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id DAA06076; Sun, 11 Jun 2000 03:48:06 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from localhost (localhost [127.0.0.1]) by calypso.engr.sgi.com (Postfix) with ESMTP id 1E0B7A7875; Sun, 11 Jun 2000 03:46:22 -0700 (PDT) Date: Sun, 11 Jun 2000 03:46:22 -0700 (PDT) From: Ulf Carlsson To: Jiri Kasi Kastner Cc: linux@cthulhu.engr.sgi.com Subject: Re: i'm not able compile new kernel In-Reply-To: <00061112164900.01364@pingu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > /usr/src/linux/include/linux/sched.h: In function `on_sig_stack': > In file included from /usr/src/linux/include/linux/mm.h:4, > from /usr/src/linux/include/linux/slab.h:14, > from /usr/src/linux/include/linux/malloc.h:4, > from /usr/src/linux/include/linux/proc_fs.h:5, > from init/main.c:15: > /usr/src/linux/include/linux/sched.h:566: `current' undeclared (first use this function) > /usr/src/linux/include/linux/sched.h:566: (Each undeclared identifier is reported only once > /usr/src/linux/include/linux/sched.h:566: for each function it appears in.) > /usr/src/linux/include/linux/sched.h:567: warning: control reaches end of non-void function > /usr/src/linux/include/linux/sched.h: In function `sas_ss_flags': > /usr/src/linux/include/linux/sched.h:571: `current' undeclared (first use this function) > /usr/src/linux/include/linux/sched.h:573: warning: control reaches end of non-void function > /usr/src/linux/include/linux/sched.h: In function `suser': > /usr/src/linux/include/linux/sched.h:596: `current' undeclared (first use this function) > /usr/src/linux/include/linux/sched.h: In function `fsuser': > /usr/src/linux/include/linux/sched.h:605: `current' undeclared (first use this function) > /usr/src/linux/include/linux/sched.h: In function `capable': > /usr/src/linux/include/linux/sched.h:621: `current' undeclared (first use this function) > /usr/src/linux/include/linux/mm.h: In function `expand_stack': > In file included from /usr/src/linux/include/linux/slab.h:14, > from /usr/src/linux/include/linux/malloc.h:4, > from /usr/src/linux/include/linux/proc_fs.h:5, > from init/main.c:15: > /usr/src/linux/include/linux/mm.h:406: `current' undeclared (first use this function) > init/main.c: In function `start_kernel': > init/main.c:536: `current' undeclared (first use this function) > init/main.c: In function `do_basic_setup': > init/main.c:597: `current' undeclared (first use this function) > make: *** [init/main.o] Error 1 You have to use egcs when you compile the kernel. Ulf From owner-linux-mips@oss.sgi.com Mon Jun 12 09:31:57 2000 Received: by oss.sgi.com id ; Mon, 12 Jun 2000 09:31:47 -0700 Received: from mailhost.uni-koblenz.de ([141.26.64.1]:58558 "EHLO mailhost.uni-koblenz.de") by oss.sgi.com with ESMTP id ; Sun, 11 Jun 2000 06:44:21 -0700 Received: from cacc-19.uni-koblenz.de (cacc-19.uni-koblenz.de [141.26.131.19]) by mailhost.uni-koblenz.de (8.9.3/8.9.3) with ESMTP id PAA06350; Sun, 11 Jun 2000 15:43:46 +0200 (MET DST) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 11 Jun 2000 15:43:28 +0200 Date: Sun, 11 Jun 2000 15:43:27 +0200 From: Ralf Baechle To: Ian Chilton Cc: info-iris-hardware@ARL.MIL, Linux-MIPS Mailing List Subject: Re: Can't find | Message-ID: <20000611154327.B9639@uni-koblenz.de> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from mailinglist@ichilton.co.uk on Sat, Jun 10, 2000 at 01:12:17PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Jun 10, 2000 at 01:12:17PM +0100, Ian Chilton wrote: > I have recently bought an Indy, but didn't get a keyboard with it, so I > plugged a standard UK PS/2 keyboard in. All works well, except the | (pipe). Dunno about IRIX or the proms but Linux assumes that you have a standard keyboard. Ralf From owner-linux-mips@oss.sgi.com Mon Jun 12 09:34:26 2000 Received: by oss.sgi.com id ; Mon, 12 Jun 2000 09:34:07 -0700 Received: from mta05-svc.ntlworld.com ([62.253.162.45]:62181 "EHLO mta05-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Mon, 12 Jun 2000 09:33:48 -0700 Received: from icserver.ichilton.co.uk ([62.252.240.129]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000612133940.SEYQ10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Mon, 12 Jun 2000 13:39:40 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5CCbJN26330; Mon, 12 Jun 2000 13:37:19 +0100 From: "Ian Chilton" To: "Alexis Cousein" Cc: "Linux-MIPS Mailing List" , Subject: RE: Can't find | Date: Mon, 12 Jun 2000 13:37:19 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <39440AA3.51CEDFA3@brussels.sgi.com> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > That's *usually* easy. You usu need another model specified in > /usr/lib/X11/xkb/X0-config.keyboard -- you have a 102 key keyboard and > the Indy thinks you have a 101 kkey keyboard or vice-versa. > Note that a file somewhere in the .desktop home directory of users can > override this file, so make sure that default file is the only one on > the system! In the desktopenv file, it has: SGI_KB_LAYOUT="gb" Will this matter? > Trouble is, it's been so long I've had to answer this that it's no > longer in deja.com archives I have tried what you suggested, and it doesn't make any difference...I can only get a |. Anyone know exactly what the command is to go in this file? I did find however, that while IRIX is booting, and that console window comes up, I can do CTRL-ALT, and they key left of 1 and get a |, but this doesn't work once it's booted. In a terminal window, I just get '15q' when I press this. Any ideas? Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Mon Jun 12 13:07:40 2000 Received: by oss.sgi.com id ; Mon, 12 Jun 2000 13:07:30 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:38690 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 12 Jun 2000 13:07:20 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id OAA01212 for ; Mon, 12 Jun 2000 14:12:19 -0700 (PDT) mail_from (indy.j@worldonline.cz) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA33405 for ; Mon, 12 Jun 2000 14:06:52 -0700 (PDT) mail_from (indy.j@worldonline.cz) Received: from smtp.worldonline.cz (smtp-1.worldonline.cz [195.146.100.76]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA03763 for ; Mon, 12 Jun 2000 14:06:47 -0700 (PDT) mail_from (indy.j@worldonline.cz) Received: from pingu (IDENT:indy@ppp67.plzen.worldonline.cz [212.11.110.71]) by smtp.worldonline.cz (8.9.3 (WOL 1.2)/8.9.3) with SMTP id XAA08045 for ; Mon, 12 Jun 2000 23:06:08 +0200 (MET DST) From: "Jiri Kastner jr." To: linux@cthulhu.engr.sgi.com Subject: Re: i'm not able compile new kernel Date: Mon, 12 Jun 2000 23:04:13 +0200 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain References: In-Reply-To: MIME-Version: 1.0 Message-Id: <00061223063600.00832@pingu> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > You have to use egcs when you compile the kernel. > > Ulf Is possible to compile kernel with gcc-2.7.2? Jirka. From owner-linux-mips@oss.sgi.com Mon Jun 12 15:38:50 2000 Received: by oss.sgi.com id ; Mon, 12 Jun 2000 15:38:40 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:30259 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 12 Jun 2000 15:38:25 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id QAA01837 for ; Mon, 12 Jun 2000 16:43:25 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA51523; Mon, 12 Jun 2000 16:38:00 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from localhost (localhost [127.0.0.1]) by calypso.engr.sgi.com (Postfix) with ESMTP id BB2FAA7875; Mon, 12 Jun 2000 16:36:12 -0700 (PDT) Date: Mon, 12 Jun 2000 16:36:12 -0700 (PDT) From: Ulf Carlsson To: "Jiri Kastner jr." Cc: linux-mips@oss.sgi.com Subject: Re: i'm not able compile new kernel In-Reply-To: <00061223063600.00832@pingu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > > > You have to use egcs when you compile the kernel. > > > > Ulf > > Is possible to compile kernel with gcc-2.7.2? Try the egcs 1.0.2 release (egcs-2.90.27) or later. Ulf From owner-linux-mips@oss.sgi.com Tue Jun 13 03:16:44 2000 Received: by oss.sgi.com id ; Tue, 13 Jun 2000 03:16:24 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:10599 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 13 Jun 2000 03:16:06 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id EAA06818 for ; Tue, 13 Jun 2000 04:21:07 -0700 (PDT) mail_from (Huseyin@sgi.com) Received: from relay.istanbul.sgi.com (relay.istanbul.sgi.com [144.253.232.2]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id EAA30010 for ; Tue, 13 Jun 2000 04:15:36 -0700 (PDT) mail_from (Huseyin@sgi.com) Received: from nt-emea-trbdc.istanbul.sgi.com (nt-emea-trbdc.istanbul.sgi.com [144.253.232.21]) by relay.istanbul.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA04066 for ; Tue, 13 Jun 2000 14:15:30 +0300 (MDT) Received: by nt-emea-trbdc.istanbul.sgi.com with Internet Mail Service (5.5.2650.21) id ; Tue, 13 Jun 2000 14:15:39 +0300 Message-ID: <9496A27F9004D411AF890090278610F3017001@nt-emea-trbdc.istanbul.sgi.com> From: Huseyin Sasmaz To: linux@cthulhu.engr.sgi.com Subject: Problem on booting linux on Indy Date: Tue, 13 Jun 2000 14:15:38 +0300 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: multipart/mixed; boundary="----_=_NextPart_000_01BFD528.B42A6A70" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01BFD528.B42A6A70 Content-Type: text/plain; charset="windows-1254" I would like to install the redhat 5.1 to my indy. I am getting the following error messages after the vmlinux is booted ; Looking up port of RPC 100003/2 on 144.253.232.3 <----- This my bootp server and nfs server which is O2. sendmsg returned error 128 .. .. .. portmap server 144.253.232.3 not responding, timed out. Then Indy panics Your help will be appreciated, Thansk in advance Huseyin <> ------_=_NextPart_000_01BFD528.B42A6A70 Content-Type: application/octet-stream; name="Huseyin Sasmaz (E-mail).vcf" Content-Disposition: attachment; filename="Huseyin Sasmaz (E-mail).vcf" BEGIN:VCARD VERSION:2.1 N:Sasmaz;Huseyin FN:Huseyin Sasmaz (E-mail) ORG:SGI TITLE:Customer Support Manager TEL;WORK;VOICE:+90 (216) 361 71 81 TEL;WORK;FAX:+90 (216) 361 71 76 ADR;WORK;ENCODING=QUOTED-PRINTABLE:;Istanbul;Ucgen Plaza, Cayiryolu Sokak.=0D=0ANo.7 Kat.13;Istanbul;;81120;Tur= key LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Istanbul=0D=0AUcgen Plaza, Cayiryolu Sokak.=0D=0ANo.7 Kat.13=0D=0AIstanbul 8= 1120=0D=0ATurkey EMAIL;PREF;INTERNET:Huseyin@sgi.com REV:20000612T081952Z END:VCARD ------_=_NextPart_000_01BFD528.B42A6A70-- From owner-linux-mips@oss.sgi.com Tue Jun 13 11:35:08 2000 Received: by oss.sgi.com id ; Tue, 13 Jun 2000 11:34:59 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:47425 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 13 Jun 2000 11:34:37 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id MAA05790 for ; Tue, 13 Jun 2000 12:39:38 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA29077 for ; Tue, 13 Jun 2000 12:34:12 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from u-76.karlsruhe.ipdial.viaginterkom.de (u-76.karlsruhe.ipdial.viaginterkom.de [62.180.19.76]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id MAA05280 for ; Tue, 13 Jun 2000 12:34:10 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 13 Jun 2000 21:34:00 +0200 Date: Tue, 13 Jun 2000 21:34:00 +0200 From: Ralf Baechle To: Huseyin Sasmaz Cc: linux@cthulhu.engr.sgi.com Subject: Re: Problem on booting linux on Indy Message-ID: <20000613213400.C19633@uni-koblenz.de> References: <9496A27F9004D411AF890090278610F3017001@nt-emea-trbdc.istanbul.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <9496A27F9004D411AF890090278610F3017001@nt-emea-trbdc.istanbul.sgi.com>; from Huseyin@sgi.com on Tue, Jun 13, 2000 at 02:15:38PM +0300 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 13, 2000 at 02:15:38PM +0300, Huseyin Sasmaz wrote: > I would like to install the redhat 5.1 to my indy. I am getting the > following error messages after the vmlinux is booted ; > > Looking up port of RPC 100003/2 on 144.253.232.3 <----- This my bootp > server and nfs server which is O2. > sendmsg returned error 128 > .. > .. > .. > portmap server 144.253.232.3 not responding, timed out. Error 128 is ENETUNREACH, network unreachable. Some network configuration problem? Ralf From owner-linux-mips@oss.sgi.com Tue Jun 13 14:41:42 2000 Received: by oss.sgi.com id ; Tue, 13 Jun 2000 14:41:32 -0700 Received: from hibernia.clubi.ie ([212.17.32.129]:22283 "EHLO hibernia.jakma.org") by oss.sgi.com with ESMTP id ; Tue, 13 Jun 2000 14:41:22 -0700 Received: from fogarty.jakma.org (IDENT:root@fogarty.jakma.org [192.168.0.4]) by hibernia.jakma.org (8.10.0/8.10.0) with ESMTP id e5DLfFk25703 for ; Tue, 13 Jun 2000 22:41:15 +0100 Received: from localhost (paul@localhost) by fogarty.jakma.org (8.10.0/8.10.0) with ESMTP id e5DLfFZ12877 for ; Tue, 13 Jun 2000 22:41:15 +0100 X-Authentication-Warning: fogarty.jakma.org: paul owned process doing -bs Date: Tue, 13 Jun 2000 22:41:15 +0100 (IST) From: Paul Jakma X-Sender: paul@fogarty.jakma.org To: Linux MIPS Subject: precompiled kernels Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing hi, where can i get precompiled kernels? i see there are precompiled 2.2.13 and 2.3.47 kernels on ftp.oss.sgi.com, are these the latest - least bug free? also, i don't have fast net access. does anyone sell any linux-mips binary/install CD's? regards, -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: In order to get a loan you must first prove you don't need it. From owner-linux-mips@oss.sgi.com Wed Jun 14 03:58:37 2000 Received: by oss.sgi.com id ; Wed, 14 Jun 2000 03:58:27 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:6254 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 14 Jun 2000 03:58:06 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id DAA16220 for ; Wed, 14 Jun 2000 03:53:09 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id DAA10368 for ; Wed, 14 Jun 2000 03:56:19 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id DAA44830 for ; Wed, 14 Jun 2000 03:54:37 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id DAA07234 for ; Wed, 14 Jun 2000 03:54:27 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from bert.physik.uni-konstanz.de [134.34.144.20] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 132Aoc-0002cj-00; Wed, 14 Jun 2000 12:54:34 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Wed, 14 Jun 2000 12:53:52 +0200 Date: Wed, 14 Jun 2000 12:53:52 +0200 From: Guido Guenther To: linux@cthulhu.engr.sgi.com Subject: newport: glyph cursor and cmap Message-ID: <20000614125351.A24432@bert.physik.uni-konstanz.de> Mail-Followup-To: Guido Guenther , linux@cthulhu.engr.sgi.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I'm currently trying to add a hw-cursor to the xserver. As far as I understand the xmap9 docs the cursor has its own colormap on the cmap chip sperate from the "normal" colormap. Can someone provide a small codepiece or docs on how two manipulate this part of the cmap chip(via the dcb)? (i didn't find anything about the cmap chips on oss.sgi.com). Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Wed Jun 14 12:17:09 2000 Received: by oss.sgi.com id ; Wed, 14 Jun 2000 12:16:58 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:43864 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 14 Jun 2000 12:16:37 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id MAA08238 for ; Wed, 14 Jun 2000 12:21:38 -0700 (PDT) mail_from (tsbogend@alpha.franken.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA53112 for ; Wed, 14 Jun 2000 12:16:10 -0700 (PDT) mail_from (tsbogend@alpha.franken.de) Received: from rachael.franken.de (rachael.franken.de [193.175.24.38]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id MAA08909 for ; Wed, 14 Jun 2000 12:16:01 -0700 (PDT) mail_from (tsbogend@alpha.franken.de) Received: by rachael.franken.de for linux@cthulhu.engr.sgi.com id m132Idv-00285JC; Wed, 14 Jun 2000 21:16:03 +0200 (MET DST) Received: from dns.franken.de(193.175.24.33), claiming to be "chico.franken.de" via SMTP by rachael.franken.de, id smtpdAAAa17379; Wed Jun 14 21:15:32 2000 Received: by chico.franken.de with UUCP for linux@cthulhu.engr.sgi.com id m132IdP-005DCnC; Wed, 14 Jun 2000 21:15:31 +0200 (MET DST) Received: (from tsbogend@localhost) by alpha.franken.de (8.8.7/8.8.5) id VAA02042; Wed, 14 Jun 2000 21:14:04 +0200 Date: Wed, 14 Jun 2000 21:14:03 +0200 From: Thomas Bogendoerfer To: Guido Guenther , linux@cthulhu.engr.sgi.com Subject: Re: newport: glyph cursor and cmap Message-ID: <20000614211403.A1996@alpha.franken.de> References: <20000614125351.A24432@bert.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000614125351.A24432@bert.physik.uni-konstanz.de>; from guido.guenther@gmx.net on Wed, Jun 14, 2000 at 12:53:52PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, Jun 14, 2000 at 12:53:52PM +0200, Guido Guenther wrote: > I'm currently trying to add a hw-cursor to the xserver. As far as I > understand the xmap9 docs the cursor has its own colormap on the cmap > chip sperate from the "normal" colormap. Can someone provide a small > codepiece or docs on how two manipulate this part of the cmap chip(via the > dcb)? (i didn't find anything about the cmap chips on oss.sgi.com). have you looked at newport_con.c ? It uses a hardware cursor. Thomas. -- This device has completely bogus header. Compaq scores again :-| It's a host bridge, but it should be called ghost bridge instead ;^) [Martin `MJ' Mares on linux-kernel] From owner-linux-mips@oss.sgi.com Thu Jun 15 11:27:41 2000 Received: by oss.sgi.com id ; Thu, 15 Jun 2000 11:27:31 -0700 Received: from staff.cerf.net ([198.137.140.12]:19955 "EHLO staff.cerf.net") by oss.sgi.com with ESMTP id ; Thu, 15 Jun 2000 11:27:18 -0700 Received: from sdhqdt0132 (dhcp684.hq.sd.cerf.net [192.215.14.84]) by staff.cerf.net (8.10.1/8.9.3) with SMTP id e5FIR6403805 for ; Thu, 15 Jun 2000 18:27:06 GMT From: "Eric Watkins" To: Subject: Status reports? Date: Thu, 15 Jun 2000 11:27:13 -0700 Message-ID: <001c01bfd6f7$536705b0$540ed7c0@hq.sd.cerf.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal X-Filtered-By: VBFilter 1.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Is progress being made on this port on a weekly basis? If so can we start having whoever codes whatever start posting the progress on a weekly/monthly basis? I know lots of this information gets distributed via IRC but someone should let everyone, who's not on IRC all the time, know what's going on and what progress is being made. I mean are we close to having a working port or really far off? Thoughts? From owner-linux-mips@oss.sgi.com Thu Jun 15 11:34:01 2000 Received: by oss.sgi.com id ; Thu, 15 Jun 2000 11:33:41 -0700 Received: from staff.cerf.net ([198.137.140.12]:60915 "EHLO staff.cerf.net") by oss.sgi.com with ESMTP id ; Thu, 15 Jun 2000 11:33:30 -0700 Received: from sdhqdt0132 (dhcp684.hq.sd.cerf.net [192.215.14.84]) by staff.cerf.net (8.10.1/8.9.3) with SMTP id e5FIXM404844; Thu, 15 Jun 2000 18:33:22 GMT From: "Eric Watkins" To: "Ralf Baechle" , Subject: RE: ADMIN: mailing list moved Date: Thu, 15 Jun 2000 11:33:29 -0700 Message-ID: <001f01bfd6f8$3394da90$540ed7c0@hq.sd.cerf.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <20000602005044.C26563@uni-koblenz.de> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal X-Filtered-By: VBFilter 1.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing http://oss.sgi.com/projects/linux-mips/archive/ This URL gives me: The requested URL /projects/linux-mips/archive/ was not found on this server. Is there a live archive? > -----Original Message----- > From: owner-linux-mips@oss.sgi.com > [mailto:owner-linux-mips@oss.sgi.com]On Behalf Of Ralf Baechle > Sent: Thursday, June 01, 2000 3:51 PM > To: linux-mips@oss.sgi.com > Subject: ADMIN: mailing list moved > > > The mailing list linux@engr.sgi.com is moving to linux-mips@oss.sgi.com. > I've copied the old subscription list, so there is no need to > resubscribe. Archives of the mailing list will be available at > http://oss.sgi.com/projects/linux-mips/archive/. Subscriptions are > be handled by majordomo@oss.sgi.com. > > Subscribers of linuxmips@oss.sgi.com - that mailing list was only used > for internal purposes, that is to generate mailinglist archives of the > old linux@engr.sgi.com list. While subscribing to it was possible it > was still a bad idea. While you were receiving all postings to > linux@engr.sgi.com most of you were not subscribed to that list and > therefore not able to post. Worse, your postings were going only to > the handfull of subscribers to that list. Subscriptions to that list > have also all been moved over to linux-mips@oss.sgi.com > > In case of problems please send mail to linux-mips-owner@oss.sgi.com > or me. > > Ralf > From owner-linux-mips@oss.sgi.com Thu Jun 15 12:41:53 2000 Received: by oss.sgi.com id ; Thu, 15 Jun 2000 12:41:32 -0700 Received: from smtp-1.worldonline.cz ([195.146.100.76]:27041 "EHLO smtp.worldonline.cz") by oss.sgi.com with ESMTP id ; Thu, 15 Jun 2000 12:41:23 -0700 Received: from pingu (IDENT:indy@ppp211.plzen.worldonline.cz [212.11.110.215]) by smtp.worldonline.cz (8.9.3 (WOL 1.2)/8.9.3) with SMTP id VAA00901 for ; Thu, 15 Jun 2000 21:40:40 +0200 (MET DST) From: "Jiri Kastner jr." To: linux-mips@oss.sgi.com Subject: Re: i'm not able compile new kernel Date: Thu, 15 Jun 2000 21:22:19 +0200 X-Mailer: KMail [version 1.0.28] Content-Type: text/plain References: In-Reply-To: MIME-Version: 1.0 Message-Id: <00061521402900.00811@pingu> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Try the egcs 1.0.2 release (egcs-2.90.27) or later. Now I have cross-compiler and I got following: In file included from /usr/include/errno.h:36, from scripts/split-include.c:26: /usr/include/bits/errno.h:32: warning: `ECANCELED' redefined /usr/include/asm/errno.h:139: warning: this is the location of the previous definition cc1: Invalid option `-fno-strict-aliasing' In file included from /usr/lib/gcc-lib/mips-linux/egcs-2.90.29/include/stdarg.h:27, from /usr/src/linux/include/linux/kernel.h:10, from /usr/src/linux/include/linux/wait.h:12, from /usr/src/linux/include/linux/fs.h:12, from /usr/src/linux/include/linux/capability.h:13, from /usr/src/linux/include/linux/binfmts.h:5, from /usr/src/linux/include/linux/sched.h:9, from /usr/src/linux/include/linux/mm.h:4, from /usr/src/linux/include/linux/slab.h:14, from /usr/src/linux/include/linux/malloc.h:4, from /usr/src/linux/include/linux/proc_fs.h:5, from init/main.c:15: /usr/lib/gcc-lib/mips-linux/egcs-2.90.29/include/va-mips.h:89: sgidefs.h: není souborem ani adresářem In file included from /usr/src/linux/include/linux/net.h:22, from /usr/src/linux/include/linux/fs.h:15, from /usr/src/linux/include/linux/capability.h:13, from /usr/src/linux/include/linux/binfmts.h:5, from /usr/src/linux/include/linux/sched.h:9, from /usr/src/linux/include/linux/mm.h:4, from /usr/src/linux/include/linux/slab.h:14, from /usr/src/linux/include/linux/malloc.h:4, from /usr/src/linux/include/linux/proc_fs.h:5, from init/main.c:15: /usr/src/linux/include/linux/socket.h:133: warning: `SOCK_STREAM' redefined /usr/src/linux/include/asm/socket.h:67: warning: this is the location of the previous definition /usr/src/linux/include/linux/socket.h:134: warning: `SOCK_DGRAM' redefined /usr/src/linux/include/asm/socket.h:65: warning: this is the location of the previous definition make: *** [init/main.o] Error 1 This is from compiling of kernel release 2.4.0test1 from czech mirror of kernel site. What's wrong I have cross-compiler egcs-2.90.29 (egcs 1.0.2 release) from ftp://oss.sgi.com/.... I've compiled latest kernel from ftp.linux.sgi.com/.../v2.3 and when I'm tryin' to boot this kernel, I get this: 72912+9440+3024+331696+23768d+3644+5808 entry: 0x8bf9a950 Exception: Status register: 0x30004803 Cause register: 0x8008 Exception PC: 0x0, Exception RA: 0x0 exception bad address: 0x0 Local I/O interupt register 1: 0x80 Saved user in hex (&gpda 0xa8740e48, &_regs 0xa8741048):................. What I'm doin' wrong..? Jirka. From owner-linux-mips@oss.sgi.com Thu Jun 15 15:51:45 2000 Received: by oss.sgi.com id ; Thu, 15 Jun 2000 15:51:35 -0700 Received: from ha1.rdc1.az.home.com ([24.1.240.66]:52198 "EHLO mail.rdc1.az.home.com") by oss.sgi.com with ESMTP id ; Thu, 15 Jun 2000 15:51:15 -0700 Received: from CX579290-B ([24.9.123.15]) by mail.rdc1.az.home.com (InterMail vM.4.01.02.00 201-229-116) with SMTP id <20000615225115.GMWW11091.mail.rdc1.az.home.com@CX579290-B> for ; Thu, 15 Jun 2000 15:51:15 -0700 From: Pete Buechler Reply-To: Pete Buechler Organization: home To: linux-mips@oss.sgi.com Subject: Maintainer for MIPS version of gcc? Date: Thu, 15 Jun 2000 15:49:15 -0700 X-Mailer: KMail [version 1.0.29.1] Content-Type: text/plain MIME-Version: 1.0 Message-Id: <00061515510204.02475@CX579290-B> Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Dear folks - While using a version of gcc which I downloaded from CVS on 09 June 2000, to compile Linux-VR which I downloaded on 07 June 2000, the compiler complains that it has hit an internal error and to please file a bug report. I used the web interface to GNATS to file one early in the day on Tuesday. It told me that I would get e-mail telling me which developer it went to. I have not heard back, so I am starting to wonder if I did something wrong or if the interface is broken. So, could you tell me who would be interested in looking at an internal gcc compiler error which is encountered when compiling Linux-VR? If I can find out who that person is, I will mail them my command, its output, and the pre-processed source file. I looked at the pre-processed code, it has some really funky C and in-line assembly. -- Pete Buechler : SuSE Linux Developer Work e-mail : peterb@suse.com Work web page : http://www.suse.com/~peterb Personal e-mail : peter.buechler@home.com From owner-linux-mips@oss.sgi.com Fri Jun 16 20:31:13 2000 Received: by oss.sgi.com id ; Fri, 16 Jun 2000 20:31:03 -0700 Received: from filer2.isc.rit.edu ([129.21.2.226]:12047 "EHLO filer2.isc.rit.edu") by oss.sgi.com with ESMTP id ; Fri, 16 Jun 2000 20:30:34 -0700 Received: from hork ("port 1025"@[129.21.10.76]) by osfmail.isc.rit.edu (PMDF V5.2-33 #41785) with ESMTP id <0FWA000464DYAN@osfmail.isc.rit.edu> for linux-mips@oss.sgi.com; Fri, 16 Jun 2000 23:30:00 -0400 (EDT) Received: from molotov (helo=localhost) by hork with local-esmtp (Exim 3.12 #1 (Debian)) id 1339JQ-000056-00; Fri, 16 Jun 2000 23:30:24 -0400 Date: Fri, 16 Jun 2000 23:30:24 -0400 (EDT) From: Chris Ruvolo Subject: TFTP Problem Resolved! X-Sender: molotov@hork To: linux-mips@oss.sgi.com Cc: jbglaw@lug-owl.de, florian@void.s.bawue.de Message-id: MIME-version: 1.0 Content-type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Those of you maintaing FAQs or installation instructions might want to make note of this. When using bootp/tftp to boot, some of us have been running into trouble. We are able to get an IP with bootp, but when it came to tftping a kernel, the client would issue a request, the server would respond, but the response would be ignored. Apparently, this is because the "Don't Fragment" flag is being set on the TFTP UDP data packets. This is set by default on kernels >= 2.3.x due to path MTU discovery! To correct for this, either boot your tftp server with a 2.2.x kernel, or "echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc" before you boot the remote machine. Thanks to the guys on #mipslinux on irc.openprojects.net for their help figuring this problem out and testing this solution. Ralf Baechle informed us about the /proc configuration. This (mis)behavior has been observed on my Indy and another machine (Siemens?) that belongs to flawed on #mipslinux. For clarification, this affects TFTP servers running linux 2.3.x. Thanks for everyone's help in getting this resolved. -Chris PS: Yea! My Indy works! I've been so frustrated, I've been considering just getting rid of it and selling it on Ebay. :) Now I'm glad I didn't. From owner-linux-mips@oss.sgi.com Fri Jun 16 21:23:43 2000 Received: by oss.sgi.com id ; Fri, 16 Jun 2000 21:23:33 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:61759 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 16 Jun 2000 21:23:10 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id VAA15556 for ; Fri, 16 Jun 2000 21:18:08 -0700 (PDT) mail_from (owner-blackbook@GUAVA.EASE.LSOFT.COM) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id VAA12277 for ; Fri, 16 Jun 2000 21:22:34 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id VAA22996 for ; Fri, 16 Jun 2000 21:20:44 -0700 (PDT) mail_from (owner-blackbook@GUAVA.EASE.LSOFT.COM) Received: from grape.ease.lsoft.com (grape.ease.lsoft.com [209.119.1.39]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id VAA04530 for ; Fri, 16 Jun 2000 21:20:41 -0700 (PDT) mail_from (owner-blackbook@GUAVA.EASE.LSOFT.COM) Received: from guava (209.119.1.40) by grape.ease.lsoft.com (LSMTP for OpenVMS v1.1b) with SMTP id <5.000B60AE@grape.ease.lsoft.com>; Sat, 17 Jun 2000 0:17:30 -0500 Received: from GUAVA.EASE.LSOFT.COM by GUAVA.EASE.LSOFT.COM (LISTSERV-TCP/IP release 1.8d) with spool id 2126999 for BLACKBOOK@GUAVA.EASE.LSOFT.COM; Sat, 17 Jun 2000 00:14:09 -0400 Approved-By: bmcnally@EURODIRECTOR.COM Received: from 209.207.216.11 by GUAVA.EASE.LSOFT.COM (SMTPL release 1.0d) with TCP; Wed, 14 Jun 2000 12:15:15 -0400 Received: from k6200 (zhb118pub178.bluewin.ch [195.186.118.178]) by cob238.dn.net (8.9.3/8.9.3) with ESMTP id MAA27280 for ; Wed, 14 Jun 2000 12:12:54 -0400 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0036_01BFD62C.A8EAD2D0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Message-ID: <003901bfd61b$e628ae30$0800a8c0@k6200> Date: Wed, 14 Jun 2000 18:16:29 +0200 Reply-To: Brian McNally From: Brian McNally Organization: www.eurodirector.com To: BLACKBOOK@GUAVA.EASE.LSOFT.COM Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. ------=_NextPart_000_0036_01BFD62C.A8EAD2D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable ab 15.6.2000 auf CD-ROM: **** blackbook 2000 ch **** =20 - die 1. Datenbank zum leichten und umfassenden Aufbau von ** Newslettern ** Kundeninformationsbriefen ** Produktankuendigungen ** Marketingaktionen ** Offerten einholen/stellen ** konzipiert f=FCr den Business to Business-Einsatz Schweiz - die Informationsdatenbank mit + 450'000 Business-Emails der Schweiz + 170'000 Business-Websites der Schweiz=20 (Registrar, weitere Domains des Registrars, Kontaktinfo) + 160'000 Kontaktadressen mit Telefon, Fax, Homepage,=20 Email, Beruf - Suchmoeglichkeiten Homepage/Adressen=20 nach Kanton - Beruf - Stichworten=20 Alle Daten exportierbar in Outlook 2000 oder Textfiles zur = Weiterverarbeitung. Eigene Daten importieren aus Outlook 2000 oder Textfiles.=20 Backup/Restore eigener Daten. Lieferumfang: Datenbankprogramm - "How to's" - Groupmailprogramme -=20 Internetmetasearchengine. (10'000 CD's zum Preis von jeweils SFr. 194.-- inklusive Porto und NN,=20 anschliessend SFr. 364.-- --- dieses Einf=FChrungsangebot gilt nur in = der Schweiz=20 und fuer die ersten 10'000 CD's) =20 More infos and order online on www.eurodirector.com www.carfashop.com www.eu-sales.com www.iq-u.com See you there! ------=_NextPart_000_0036_01BFD62C.A8EAD2D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
 
ab=20 15.6.2000 auf CD-ROM:

****       blackbook 2000=20 ch    ****

 
- die=20 1. Datenbank zum leichten und umfassenden Aufbau=20 von

**   Newslettern
**  =20 Kundeninformationsbriefen
**  =20 Produktankuendigungen
**   = Marketingaktionen
**  =20 Offerten einholen/stellen
**   konzipiert f=FCr den = Business to=20 Business-Einsatz Schweiz

- die = Informationsdatenbank=20 mit

+ 450'000 Business-Emails der = Schweiz
+=20 170'000 Business-Websites der Schweiz
(Registrar, = weitere=20 Domains des Registrars, Kontaktinfo)
+ 160'000=20 Kontaktadressen mit Telefon, Fax, Homepage, =
Email, = Beruf

-=20 Suchmoeglichkeiten Homepage/Adressen =
nach Kanton - Beruf=20 - Stichworten

Alle Daten exportierbar in Outlook 2000 = oder=20 Textfiles zur Weiterverarbeitung.
Eigene Daten importieren aus = Outlook 2000=20 oder Textfiles.
Backup/Restore eigener=20 Daten.

Lieferumfang:
Datenbankprogramm - "How to's" -=20 Groupmailprogramme -
Internetmetasearchengine.

(10'000 CD's zum Preis = von=20 jeweils SFr. 194.-- inklusive Porto und NN, =
anschliessend SFr. 364.--=20 --- dieses Einf=FChrungsangebot gilt nur in der Schweiz=20
und fuer = die ersten 10'000=20 CD's)
 
More infos and order online on
www.eurodirector.com
www.carfashop.com
www.eu-sales.com
www.iq-u.com

See you=20 there!
------=_NextPart_000_0036_01BFD62C.A8EAD2D0-- From owner-linux-mips@oss.sgi.com Sun Jun 18 04:23:13 2000 Received: by oss.sgi.com id ; Sun, 18 Jun 2000 04:22:54 -0700 Received: from belgarath.esg-guetersloh.mediapoint.de ([193.189.251.50]:17722 "HELO belgarath.esg-guetersloh.mediapoint.de") by oss.sgi.com with SMTP id ; Sat, 17 Jun 2000 21:16:16 -0700 Received: by belgarath.esg-guetersloh.mediapoint.de (Postfix, from userid 1000) id D2ED851314; Sat, 17 Jun 2000 23:21:02 +0200 (CEST) Date: Sat, 17 Jun 2000 23:21:02 +0200 From: Jan-Benedict Glaw To: Chris Ruvolo Cc: linux-mips@oss.sgi.com, florian@void.s.bawue.de Subject: Re: TFTP Problem Resolved! Message-ID: <20000617232102.A1543@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: Chris Ruvolo , linux-mips@oss.sgi.com, florian@void.s.bawue.de References: Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="VS++wcV0S1rZb1Fb" X-Mailer: Mutt 1.0i In-Reply-To: ; from csr6702@osfmail.isc.rit.edu on Fri, Jun 16, 2000 at 11:30:24PM -0400 X-Operating-System: Linux belgarath.esg-guetersloh.mediapoint.de 2.0.35 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --VS++wcV0S1rZb1Fb Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable On Fri, Jun 16, 2000 at 11:30:24PM -0400, Chris Ruvolo wrote: >=20 > To correct for this, either boot your tftp server with a 2.2.x kernel, or > "echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc" before you boot the remote > machine. Thank you *very* much! I'd love to proceed, but unfotunately my developement machine (laptop) stopped working;( > This (mis)behavior has been observed on my Indy and another machine > (Siemens?) that belongs to flawed on #mipslinux. SNI RW320, which is (seems to be...) equivalent to SGI Indigo. > PS: Yea! My Indy works! I've been so frustrated, I've been considering > just getting rid of it and selling it on Ebay. :) Now I'm glad I didn't. Don't know if my machine would work. Is CVS at oss.sgi.com down? As well as FTP? I'd love to re-start developement, but without sources... MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --VS++wcV0S1rZb1Fb Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.1 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEAREBAAYFAjlL674ACgkQHb1edYOZ4bsg9gCfbydO6nVz4NZd+kcOa5igds4E 40IAniY0YYmHMEViQDhqCLQjQP1/sCNI =+POm -----END PGP SIGNATURE----- --VS++wcV0S1rZb1Fb-- From owner-linux-mips@oss.sgi.com Sun Jun 18 04:23:13 2000 Received: by oss.sgi.com id ; Sun, 18 Jun 2000 04:22:54 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:26457 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 17 Jun 2000 21:03:54 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id SAA06556 for ; Sat, 17 Jun 2000 18:51:47 -0700 (PDT) mail_from (rou@mx4.redestb.es) From: rou@mx4.redestb.es Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA44756 for ; Sat, 17 Jun 2000 18:46:14 -0700 (PDT) mail_from (rou@mx4.redestb.es) Received: from tinet0.redestb.es (tinet0.redestb.es [194.179.106.117]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id SAA05106 for ; Sat, 17 Jun 2000 18:46:13 -0700 (PDT) mail_from (rou@mx4.redestb.es) Received: from fclients1.redestb.es ([194.179.106.34]) by tinet0.redestb.es (Post.Office MTA v3.1 release PO203a ID# 0-0U10L2S100) with ESMTP id AAA183 for ; Sun, 18 Jun 2000 03:46:16 +0200 Received: from rou.marywell.com ([62.82.229.209]) by fclients1.redestb.es (Post.Office MTA v3.1.2 release (PO205-101c) ID# 0-0U10L2S100) with ESMTP id DFO129 for ; Sun, 18 Jun 2000 03:46:15 +0200 Received: (from rou@localhost) by rou.marywell.com (8.9.3/8.9.3) id CAA16304 for linux@engr.sgi.com; Sun, 18 Jun 2000 02:30:49 +0200 Date: Sun, 18 Jun 2000 02:30:49 +0200 Message-Id: <200006180030.CAA16304@rou.marywell.com> To: linux@cthulhu.engr.sgi.com Subject: help! Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing With all my respect, This is new for me and I wouldn't like to disturb anybody. Since some months ago I'm looking for work and it's beeing dificult to find a good place and position. I have experience in communications, hardware & software, protocols, security, programming, cryptogaphy and many other things. I need a work, please, help!. From owner-linux-mips@oss.sgi.com Sun Jun 18 04:23:13 2000 Received: by oss.sgi.com id ; Sun, 18 Jun 2000 04:22:54 -0700 Received: from u-244.frankfurt3.ipdial.viaginterkom.de ([62.180.18.244]:14859 "EHLO u-244.frankfurt3.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sat, 17 Jun 2000 10:38:23 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sat, 17 Jun 2000 19:37:34 +0200 Date: Sat, 17 Jun 2000 19:37:34 +0200 From: Ralf Baechle To: linux-mips@oss.sgi.com Subject: Re: ADMIN: mailing list moved Message-ID: <20000617193734.A14223@bacchus.dhis.org> References: <20000602005044.C26563@uni-koblenz.de> <001f01bfd6f8$3394da90$540ed7c0@hq.sd.cerf.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <001f01bfd6f8$3394da90$540ed7c0@hq.sd.cerf.net>; from watkinse@attens.com on Thu, Jun 15, 2000 at 11:33:29AM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 15, 2000 at 11:33:29AM -0700, Eric Watkins wrote: > http://oss.sgi.com/projects/linux-mips/archive/ > > This URL gives me: > > The requested URL /projects/linux-mips/archive/ was not found on this > server. > > Is there a live archive? The URL was correct, just the web setup broken. It's fixed now, in fact already since a few days. Ralf From owner-linux-mips@oss.sgi.com Sun Jun 18 08:53:05 2000 Received: by oss.sgi.com id ; Sun, 18 Jun 2000 08:52:56 -0700 Received: from mail1.mco.bellsouth.net ([205.152.111.13]:1501 "EHLO mail1.mco.bellsouth.net") by oss.sgi.com with ESMTP id ; Sun, 18 Jun 2000 08:52:31 -0700 Received: from bellsouth.net (host-209-214-104-85.bhm.bellsouth.net [209.214.104.85]) by mail1.mco.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id LAA29914 for ; Sun, 18 Jun 2000 11:52:00 -0400 (EDT) Message-ID: <394CF02E.89BBBB37@bellsouth.net> Date: Sun, 18 Jun 2000 15:52:14 +0000 From: dave X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.2.13-7mdksmp i686) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: Kinda related to Linux Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I did not know where else to send this to. I originally subscribed to see if there was anyway I could help. Have been reading the posts and decided all I can do is try out stuff you guys port. As far as working on the port, the posts read to me like a 4th grader would look at quantum physics. My problem is I can't get my Indy to go through my Linux box to the 'net. It (Linux,Irix) will not transfer eth0 to ppp. Have tried everything I know of, read or just made upwith no luck. In /etc/hosts on Indy I must have my ISP or it reads "network unknown" in ping. Have I missed something major/minor in Irix 6.2 or is it in Linux? I do not mean to be a pain in the ***, but would like to get this resolved so I can get Linux on Indy and really screw it up! Thanks in advance for any help anyone would be willing to give. Dave Keen From owner-linux-mips@oss.sgi.com Sun Jun 18 09:37:15 2000 Received: by oss.sgi.com id ; Sun, 18 Jun 2000 09:37:05 -0700 Received: from altrade.nijmegen.inter.nl.net ([193.67.237.6]:24556 "EHLO altrade.nijmegen.inter.nl.net") by oss.sgi.com with ESMTP id ; Sun, 18 Jun 2000 09:36:45 -0700 Received: from whale.dutch.mountain by altrade.nijmegen.inter.nl.net via 1Cust62.tnt19.rtm1.nl.uu.net [213.53.12.62] with ESMTP for id SAA29575 (8.8.8/3.41); Sun, 18 Jun 2000 18:36:15 +0200 (MET DST) Received: from localhost(really [127.0.0.1]) by whale.dutch.mountain via in.smtpd with smtp id for ; Sun, 18 Jun 2000 18:35:10 +0200 (MET DST) (Smail-3.2 1996-Jul-4 #2 built 1996-Nov-26) Date: Sun, 18 Jun 2000 18:35:09 +0200 (MET DST) From: Richard van den Berg X-Sender: ravdberg@whale.dutch.mountain To: linux-mips@oss.sgi.com Subject: Re: Kinda related to Linux In-Reply-To: <394CF02E.89BBBB37@bellsouth.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, 18 Jun 2000, dave wrote: > Hello, > I did not know where else to send this to. I originally subscribed to > see if there was anyway I could help. Have been reading the posts and > decided all I can do is try out stuff you guys port. As far as working > on the port, the posts read to me like a 4th grader would look at > quantum physics. > My problem is I can't get my Indy to go through my Linux box to the > 'net. It (Linux,Irix) will not transfer eth0 to ppp. Have tried > everything I know of, read or just made upwith no luck. In /etc/hosts on > Indy I must have my ISP or it reads "network unknown" in ping. Have I > missed something major/minor in Irix 6.2 or is it in Linux? I do not > mean to be a pain in the ***, but would like to get this resolved so I > can get Linux on Indy and really screw it up! > Thanks in advance for any help anyone would be willing to give. > Dave Keen Make sure your Linux box is running a kernel with support for a kind of packet filtering like ipfwadm or ipchains. There are HOWTO's available for this. Regards, Richard From owner-linux-mips@oss.sgi.com Sun Jun 18 23:18:50 2000 Received: by oss.sgi.com id ; Sun, 18 Jun 2000 23:18:40 -0700 Received: from hibernia.clubi.ie ([212.17.32.129]:16136 "EHLO hibernia.jakma.org") by oss.sgi.com with ESMTP id ; Sun, 18 Jun 2000 23:18:29 -0700 Received: from fogarty.jakma.org (IDENT:root@fogarty.jakma.org [192.168.0.4]) by hibernia.jakma.org (8.10.0/8.10.0) with ESMTP id e5J6Imf06386 for ; Mon, 19 Jun 2000 07:18:48 +0100 Received: from localhost (paul@localhost) by fogarty.jakma.org (8.10.0/8.10.0) with ESMTP id e5J6ImK08668 for ; Mon, 19 Jun 2000 07:18:48 +0100 X-Authentication-Warning: fogarty.jakma.org: paul owned process doing -bs Date: Mon, 19 Jun 2000 07:18:48 +0100 (IST) From: Paul Jakma X-Sender: paul@fogarty.jakma.org To: Linux MIPS Subject: linux/mips on cd? Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing does anyone sell a CD of linux-mips? I'd like to try linux-mips in production use as my dialup firewall. (security thru obscurity: let's see those script kiddies find 'sploits' for linux/mips!). However, i don't have the bandwidth to download the distribution. if anyone is selling CD's, or if anyone would be kind enough to burn a CD for me, I'd be very grateful if they'd contact me off-list. thanks, -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: It got to the point where I had to get a haircut or both feet firmly planted in the air. From owner-linux-mips@oss.sgi.com Mon Jun 19 02:44:10 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 02:44:01 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:5063 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 02:43:40 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id LAA12007; Mon, 19 Jun 2000 11:31:28 +0200 (MET DST) Date: Mon, 19 Jun 2000 11:31:27 +0200 (MET DST) From: "Maciej W. Rozycki" Reply-To: "Maciej W. Rozycki" To: Ralf Baechle cc: Harald Koerfgen , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Icache coherency problems for R3400, DS5000/240 Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf, Working on gdb I discovered a weird behaviour of my DS5000/240 -- under unspecified circumstances there were spurious breakpoint traps happening and some single-step breakpoints appeared persistent. The following patch fixes these problems, making gdb fully reliable. Besides obvious bugfixes, it introduces two significant changes. First, flush_icache_page() now performs what the name suggests, i.e. flushes the instruction cache. Without this change ptrace(PTRACE_POKE*, ...) calls are unreliable. Second, it changes the assumption of the icache line size to a single word -- apparently, at least R3400 of DS5000/240 has an icache with such a layout (DEC docs confirm it, indeed). Without this change, there are problems with breakpoints placed at addresses equal 4 modulo 8. I vote for an immediate inclusion of these fixes. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + diff -u --recursive --new-file linux-mips-2.3.99-pre8-20000523.macro/arch/mips/mm/r2300.c linux-mips-2.3.99-pre8-20000523/arch/mips/mm/r2300.c --- linux-mips-2.3.99-pre8-20000523.macro/arch/mips/mm/r2300.c Tue Mar 28 04:26:12 2000 +++ linux-mips-2.3.99-pre8-20000523/arch/mips/mm/r2300.c Sun Jun 18 02:08:39 2000 @@ -151,15 +151,15 @@ static void __init probe_dcache(void) { - dcache_size = r3k_cache_size(ST0_DE); + dcache_size = r3k_cache_size(ST0_ISC); printk("Primary data cache %dkb, linesize 4 bytes\n", dcache_size >> 10); } static void __init probe_icache(void) { - icache_size = r3k_cache_size(ST0_DE|ST0_CE); - printk("Primary instruction cache %dkb, linesize 8 bytes\n", + icache_size = r3k_cache_size(ST0_ISC|ST0_SWC); + printk("Primary instruction cache %dkb, linesize 4 bytes\n", icache_size >> 10); } @@ -174,43 +174,43 @@ save_and_cli(flags); /* isolate cache space */ - write_32bit_cp0_register(CP0_STATUS, (ST0_DE|ST0_CE|flags)&~ST0_IEC); + write_32bit_cp0_register(CP0_STATUS, (ST0_ISC|ST0_SWC|flags)&~ST0_IEC); - for (i = 0; i < size; i += 0x100) { + for (i = 0; i < size; i += 0x080) { asm ( "sb\t$0,0x000(%0)\n\t" + "sb\t$0,0x004(%0)\n\t" "sb\t$0,0x008(%0)\n\t" + "sb\t$0,0x00c(%0)\n\t" "sb\t$0,0x010(%0)\n\t" + "sb\t$0,0x014(%0)\n\t" "sb\t$0,0x018(%0)\n\t" - "sb\t$0,0x020(%0)\n\t" + "sb\t$0,0x01c(%0)\n\t" + "sb\t$0,0x020(%0)\n\t" + "sb\t$0,0x024(%0)\n\t" "sb\t$0,0x028(%0)\n\t" + "sb\t$0,0x02c(%0)\n\t" "sb\t$0,0x030(%0)\n\t" + "sb\t$0,0x034(%0)\n\t" "sb\t$0,0x038(%0)\n\t" - "sb\t$0,0x040(%0)\n\t" + "sb\t$0,0x03c(%0)\n\t" + "sb\t$0,0x040(%0)\n\t" + "sb\t$0,0x044(%0)\n\t" "sb\t$0,0x048(%0)\n\t" + "sb\t$0,0x04c(%0)\n\t" "sb\t$0,0x050(%0)\n\t" + "sb\t$0,0x054(%0)\n\t" "sb\t$0,0x058(%0)\n\t" - "sb\t$0,0x060(%0)\n\t" + "sb\t$0,0x05c(%0)\n\t" + "sb\t$0,0x060(%0)\n\t" + "sb\t$0,0x064(%0)\n\t" "sb\t$0,0x068(%0)\n\t" + "sb\t$0,0x06c(%0)\n\t" "sb\t$0,0x070(%0)\n\t" + "sb\t$0,0x074(%0)\n\t" "sb\t$0,0x078(%0)\n\t" - "sb\t$0,0x080(%0)\n\t" - "sb\t$0,0x088(%0)\n\t" - "sb\t$0,0x090(%0)\n\t" - "sb\t$0,0x098(%0)\n\t" - "sb\t$0,0x0a0(%0)\n\t" - "sb\t$0,0x0a8(%0)\n\t" - "sb\t$0,0x0b0(%0)\n\t" - "sb\t$0,0x0b8(%0)\n\t" - "sb\t$0,0x0c0(%0)\n\t" - "sb\t$0,0x0c8(%0)\n\t" - "sb\t$0,0x0d0(%0)\n\t" - "sb\t$0,0x0d8(%0)\n\t" - "sb\t$0,0x0e0(%0)\n\t" - "sb\t$0,0x0e8(%0)\n\t" - "sb\t$0,0x0f0(%0)\n\t" - "sb\t$0,0x0f8(%0)\n\t" + "sb\t$0,0x07c(%0)\n\t" : : "r" (p) ); - p += 0x100; + p += 0x080; } restore_flags(flags); @@ -221,13 +221,13 @@ unsigned long i, flags; volatile unsigned char *p = (char *)start; - if (size > icache_size) - size = icache_size; + if (size > dcache_size) + size = dcache_size; save_and_cli(flags); /* isolate cache space */ - write_32bit_cp0_register(CP0_STATUS, (ST0_DE|flags)&~ST0_IEC); + write_32bit_cp0_register(CP0_STATUS, (ST0_ISC|flags)&~ST0_IEC); for (i = 0; i < size; i += 0x080) { asm ( "sb\t$0,0x000(%0)\n\t" @@ -376,7 +376,7 @@ save_and_cli(flags); - write_32bit_cp0_register(CP0_STATUS, (ST0_DE|ST0_CE|flags)&~ST0_IEC); + write_32bit_cp0_register(CP0_STATUS, (ST0_ISC|ST0_SWC|flags)&~ST0_IEC); asm ( "sb\t$0,0x000(%0)\n\t" "sb\t$0,0x008(%0)\n\t" diff -u --recursive --new-file linux-mips-2.3.99-pre8-20000523.macro/include/asm-mips/mipsregs.h linux-mips-2.3.99-pre8-20000523/include/asm-mips/mipsregs.h --- linux-mips-2.3.99-pre8-20000523.macro/include/asm-mips/mipsregs.h Sat May 27 01:49:02 2000 +++ linux-mips-2.3.99-pre8-20000523/include/asm-mips/mipsregs.h Sun Jun 18 02:18:51 2000 @@ -234,6 +234,8 @@ #define ST0_UX 0x00000020 #define ST0_SX 0x00000040 #define ST0_KX 0x00000080 +#define ST0_DE 0x00010000 +#define ST0_CE 0x00020000 /* * Bitfields in the R[23]000 cp0 status register. @@ -245,6 +247,8 @@ #define ST0_IEO 0x00000010 #define ST0_KUO 0x00000020 /* bits 6 & 7 are reserved on R[23]000 */ +#define ST0_ISC 0x00010000 +#define ST0_SWC 0x00020000 /* * Bits specific to the R4640/R4650 @@ -273,8 +277,6 @@ #define STATUSF_IP6 (1 << 14) #define STATUSB_IP7 15 #define STATUSF_IP7 (1 << 15) -#define ST0_DE 0x00010000 -#define ST0_CE 0x00020000 #define ST0_CH 0x00040000 #define ST0_SR 0x00100000 #define ST0_BEV 0x00400000 diff -u --recursive --new-file linux-mips-2.3.99-pre8-20000523.macro/include/asm-mips/pgtable.h linux-mips-2.3.99-pre8-20000523/include/asm-mips/pgtable.h --- linux-mips-2.3.99-pre8-20000523.macro/include/asm-mips/pgtable.h Tue Jun 6 23:21:21 2000 +++ linux-mips-2.3.99-pre8-20000523/include/asm-mips/pgtable.h Sat Jun 17 19:35:42 2000 @@ -43,7 +43,7 @@ #define flush_page_to_ram(page) _flush_page_to_ram(page) #define flush_icache_range(start, end) flush_cache_all() -#define flush_icache_page(start,page) do { } while(0) +#define flush_icache_page(start,page) flush_cache_all() /* From owner-linux-mips@oss.sgi.com Mon Jun 19 09:09:23 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 09:09:03 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:15921 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 09:08:54 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id JAA01022 for ; Mon, 19 Jun 2000 09:14:02 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id JAA75372 for ; Mon, 19 Jun 2000 09:08:25 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id JAA03747 for ; Mon, 19 Jun 2000 09:08:23 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from frodo.physik.uni-konstanz.de [134.34.144.32] by gandalf.physik.uni-konstanz.de with esmtp (Exim 2.05 #1 (Debian)) id 13445w-0002B6-00; Mon, 19 Jun 2000 18:08:16 +0200 Received: from agx by frodo.physik.uni-konstanz.de with local (Exim 2.05 #1 (Debian)) id 13445t-0004Q6-00; Mon, 19 Jun 2000 18:08:13 +0200 Date: Mon, 19 Jun 2000 18:08:12 +0200 From: Guido Guenther To: linux@cthulhu.engr.sgi.com Subject: X installation instruction Message-ID: <20000619180812.A16658@frodo.physik.uni-konstanz.de> Mail-Followup-To: linux@cthulhu.engr.sgi.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Since same people had problems installing the X binaries I stitched together some _really short_ installation instructions at: http://honk.physik.uni-konstanz.de/~agx/mipslinux/x/x.html -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Mon Jun 19 10:04:43 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 10:04:24 -0700 Received: from mail.exfo.com ([206.191.88.36]:39691 "EHLO mail.exfo.com") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 10:04:07 -0700 Received: from exfo.com ([172.16.46.216]) by mail.exfo.com (Netscape Messaging Server 3.62) with ESMTP id 195 for ; Mon, 19 Jun 2000 13:02:14 -0400 Message-ID: <394E5321.CB49B0B7@exfo.com> Date: Mon, 19 Jun 2000 13:06:41 -0400 From: "Philippe Chauvat" X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: fr,en MIME-Version: 1.0 To: Linux Mips Subject: [ Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello there, When I boot my Challenger on the remote machine (for installation), a kernel panic event is raised. Does anybody could explain to me, what could appear ? Thanks a lot Philippe From owner-linux-mips@oss.sgi.com Mon Jun 19 11:36:34 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 11:36:14 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:54801 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 19 Jun 2000 11:36:02 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id F3ABD81F; Mon, 19 Jun 2000 20:36:01 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id F0AE88F73; Mon, 19 Jun 2000 11:32:58 -0700 (PDT) Date: Mon, 19 Jun 2000 11:32:58 -0700 From: Florian Lohoff To: Philippe Chauvat Cc: Linux Mips Subject: Re: [ Message-ID: <20000619113258.C691@paradigm.rfc822.org> References: <394E5321.CB49B0B7@exfo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: <394E5321.CB49B0B7@exfo.com>; from philippe.chauvat@exfo.com on Mon, Jun 19, 2000 at 01:06:41PM -0400 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 01:06:41PM -0400, Philippe Chauvat wrote: > Hello there, > > When I boot my Challenger on the remote machine (for installation), a > kernel panic event is raised. You mean SGI Challenge ? > Does anybody could explain to me, what could appear ? If so - This machine is AFAIk completely unsupported ... Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Mon Jun 19 11:36:43 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 11:36:24 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:54033 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 19 Jun 2000 11:36:02 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id B3F4181D; Mon, 19 Jun 2000 20:36:01 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id B99FA8F73; Mon, 19 Jun 2000 11:31:48 -0700 (PDT) Date: Mon, 19 Jun 2000 11:31:48 -0700 From: Florian Lohoff To: Paul Jakma Cc: Linux MIPS Subject: Re: linux/mips on cd? Message-ID: <20000619113148.B691@paradigm.rfc822.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from paul@clubi.ie on Mon, Jun 19, 2000 at 07:18:48AM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 07:18:48AM +0100, Paul Jakma wrote: > does anyone sell a CD of linux-mips? > > I'd like to try linux-mips in production use as my dialup > firewall. (security thru obscurity: let's see those script kiddies > find 'sploits' for linux/mips!). However, i don't have the bandwidth > to download the distribution. > > if anyone is selling CD's, or if anyone would be kind enough to burn > a CD for me, I'd be very grateful if they'd contact me off-list. There are currently NO linux-mips cds for ANY architecture. Are you running little or big endian ? What type of system ? BTW: Linux Mips is by far ready for production. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Mon Jun 19 11:46:15 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 11:45:55 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:25094 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 11:45:50 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id LAA24283; Mon, 19 Jun 2000 11:45:36 -0700 Date: Mon, 19 Jun 2000 11:45:36 -0700 From: Keith M Wesolowski To: Florian Lohoff Cc: Philippe Chauvat , Linux Mips Subject: Re: [ Message-ID: <20000619114536.A22137@chem.unr.edu> References: <394E5321.CB49B0B7@exfo.com> <20000619113258.C691@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20000619113258.C691@paradigm.rfc822.org>; from flo@rfc822.org on Mon, Jun 19, 2000 at 11:32:58AM -0700 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 11:32:58AM -0700, Florian Lohoff wrote: > You mean SGI Challenge ? > > > Does anybody could explain to me, what could appear ? > > If so - This machine is AFAIk completely unsupported ... It could be a Challenge S, which should probably work. What kernel/machine exactly is this? -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Jun 19 11:46:24 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 11:46:15 -0700 Received: from aeon.tvd.be ([195.162.196.20]:37561 "EHLO aeon.tvd.be") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 11:46:00 -0700 Received: from callisto.of.borg (cable-195-162-216-83.upc.chello.be [195.162.216.83]) by aeon.tvd.be (8.9.3/8.9.3/RELAY-1.1) with ESMTP id UAA19314; Mon, 19 Jun 2000 20:45:56 +0200 (MET DST) Received: from localhost (geert@localhost) by callisto.of.borg (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id UAA13030; Mon, 19 Jun 2000 20:45:55 +0200 X-Authentication-Warning: callisto.of.borg: geert owned process doing -bs Date: Mon, 19 Jun 2000 20:45:55 +0200 (CEST) From: Geert Uytterhoeven To: Florian Lohoff cc: Paul Jakma , Linux MIPS Subject: Re: linux/mips on cd? In-Reply-To: <20000619113148.B691@paradigm.rfc822.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 19 Jun 2000, Florian Lohoff wrote: > On Mon, Jun 19, 2000 at 07:18:48AM +0100, Paul Jakma wrote: > > does anyone sell a CD of linux-mips? > > > > I'd like to try linux-mips in production use as my dialup > > firewall. (security thru obscurity: let's see those script kiddies > > find 'sploits' for linux/mips!). However, i don't have the bandwidth > > to download the distribution. > > > > if anyone is selling CD's, or if anyone would be kind enough to burn > > a CD for me, I'd be very grateful if they'd contact me off-list. > > There are currently NO linux-mips cds for ANY architecture. Are you > running little or big endian ? What type of system ? [ taking CD from the CD rack ] [ citing CD cover ] Linux Rough Cuts Excavated for PowerPC (MkLinux)m UltraSPARC, MIPS, and M68K by the Red Hat Linux Community Copyright 1998 Red Hat Software, Inc. It even has an ISBN number: 1-888172-14-2 :-) Now I have to admit there's no decent (read: Debian) distro for Linux/MIPS on CD yet... Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Mon Jun 19 12:40:05 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 12:39:45 -0700 Received: from hibernia.clubi.ie ([212.17.32.129]:63240 "EHLO hibernia.jakma.org") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 12:39:31 -0700 Received: from fogarty.jakma.org (IDENT:root@fogarty.jakma.org [192.168.0.4]) by hibernia.jakma.org (8.10.0/8.10.0) with ESMTP id e5JJdGf27627; Mon, 19 Jun 2000 20:39:16 +0100 Received: from localhost (paul@localhost) by fogarty.jakma.org (8.10.0/8.10.0) with ESMTP id e5JJdGh12724; Mon, 19 Jun 2000 20:39:16 +0100 X-Authentication-Warning: fogarty.jakma.org: paul owned process doing -bs Date: Mon, 19 Jun 2000 20:39:16 +0100 (IST) From: Paul Jakma X-Sender: paul@fogarty.jakma.org To: Florian Lohoff cc: Linux MIPS Subject: Re: linux/mips on cd? In-Reply-To: <20000619113148.B691@paradigm.rfc822.org> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 19 Jun 2000, Florian Lohoff wrote: > There are currently NO linux-mips cds for ANY architecture. Are you > running little or big endian ? What type of system ? > CD's: i meant more informal copies of the latest CVS.. :) > BTW: Linux Mips is by far ready for production. > i know, i know.. I've read parts of the archive, and have lurked on the list for a few months. However, it seems to me the Indy (little endian linux/mips, right?) does at least boot and run some userspace stuff. i'm here more for the fun factor. (i've run linux on x86, Alpha and PPC. Love to see it just booting on MIPS :) ) > Flo > incidentally, i tried booting the 2.2.13 kernel from the website. It appeared to work as the PROM downloaded it and didn't complain, but it produced absolutely no output. and when i pressed a key it booted back to PROM. do these kernels require serial console? regards, -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: If we won't stand together, we don't stand a chance. From owner-linux-mips@oss.sgi.com Mon Jun 19 13:22:16 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 13:22:06 -0700 Received: from obelix.hrz.tu-chemnitz.de ([134.109.132.55]:40345 "EHLO obelix.hrz.tu-chemnitz.de") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 13:21:56 -0700 Received: from sunnyboy.informatik.tu-chemnitz.de by obelix.hrz.tu-chemnitz.de with Local SMTP (PP); Mon, 19 Jun 2000 22:21:29 +0200 Received: from scotty.mgnet.de (sulu.csn.tu-chemnitz.de [134.109.96.105]) by sunnyboy.informatik.tu-chemnitz.de (8.8.8/8.8.8) with SMTP id WAA27036 for ; Mon, 19 Jun 2000 22:21:27 +0200 (MET DST) Received: (qmail 28409 invoked from network); 19 Jun 2000 20:21:26 -0000 Received: from spock.mgnet.de (HELO scotty.mgnet.de) (192.168.1.4) by scotty.mgnet.de with SMTP; 19 Jun 2000 20:21:26 -0000 Date: Mon, 19 Jun 2000 22:22:15 +0200 From: Klaus Naumann To: Paul Jakma Cc: Linux MIPS Subject: Re: linux/mips on cd? Message-ID: <20000619222215.A23089@spock> Reply-To: spock@mgnet.de References: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: ; from paul@clubi.ie on Mon, Jun 19, 2000 at 21:39:16 +0200 X-Mailer: Balsa 0.8.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 19 Jun 2000 21:39:16 Paul Jakma wrote: > i know, i know.. I've read parts of the archive, and have lurked on > the list for a few months. However, it seems to me the Indy (little > endian linux/mips, right?) does at least boot and run some userspace No, big endian ;) Yes, it boots and it's possible to run most of the usual stuffs ... Also X is working now (at snail speed but working) because Guido Guenter made a X server. > i'm here more for the fun factor. (i've run linux on x86, Alpha > and PPC. Love to see it just booting on MIPS :) ) If you just want to see it booting you might want to get a vmlinux-indy from oss.sgi.com and boot it up - it should work. > incidentally, i tried booting the 2.2.13 kernel from the website. It > appeared to work as the PROM downloaded it and didn't complain, but > it produced absolutely no output. and when i pressed a key it booted > back to PROM. This is not the default behaviour - The PROM should freeze after it boots up the kernel if you use serial console - otherwise you will see the newport console ... If there is a running distribution I could make a CD and send it to you ... so this is not the problem - but it's not worth it until we have a system which is running more stable ... Cu, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Mon Jun 19 13:23:35 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 13:23:16 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:62470 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 13:23:04 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id NAA27178; Mon, 19 Jun 2000 13:22:51 -0700 Date: Mon, 19 Jun 2000 13:22:51 -0700 From: Keith M Wesolowski To: Paul Jakma Cc: Florian Lohoff , Linux MIPS Subject: Re: linux/mips on cd? Message-ID: <20000619132251.D22137@chem.unr.edu> References: <20000619113148.B691@paradigm.rfc822.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from paul@clubi.ie on Mon, Jun 19, 2000 at 08:39:16PM +0100 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 08:39:16PM +0100, Paul Jakma wrote: > i know, i know.. I've read parts of the archive, and have lurked on > the list for a few months. However, it seems to me the Indy (little > endian linux/mips, right?) does at least boot and run some userspace > stuff. SGI is bigendian. It does boot and there is a userland. I personally have even seen X working. > incidentally, i tried booting the 2.2.13 kernel from the website. It > appeared to work as the PROM downloaded it and didn't complain, but > it produced absolutely no output. and when i pressed a key it booted > back to PROM. > > do these kernels require serial console? I was able to boot those. Hmmm. You can also try the indy kernel at ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/kernels/ which should definitely work and support the graphics console, if you have XL graphics. If you have XZ you are in trouble at the moment. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Jun 19 13:30:45 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 13:30:36 -0700 Received: from hibernia.clubi.ie ([212.17.32.129]:12810 "EHLO hibernia.jakma.org") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 13:30:16 -0700 Received: from fogarty.jakma.org (IDENT:root@fogarty.jakma.org [192.168.0.4]) by hibernia.jakma.org (8.10.0/8.10.0) with ESMTP id e5JKUZf29739; Mon, 19 Jun 2000 21:30:35 +0100 Received: from localhost (paul@localhost) by fogarty.jakma.org (8.10.0/8.10.0) with ESMTP id e5JKUZU13023; Mon, 19 Jun 2000 21:30:35 +0100 X-Authentication-Warning: fogarty.jakma.org: paul owned process doing -bs Date: Mon, 19 Jun 2000 21:30:35 +0100 (IST) From: Paul Jakma X-Sender: paul@fogarty.jakma.org To: Keith M Wesolowski cc: Florian Lohoff , Linux MIPS Subject: Re: linux/mips on cd? In-Reply-To: <20000619132251.D22137@chem.unr.edu> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 19 Jun 2000, Keith M Wesolowski wrote: > SGI is bigendian. It does boot and there is a userland. I personally > have even seen X working. > that's using Xsgi isn't it? > I was able to boot those. Hmmm. You can also try the indy kernel at > ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/kernels/ which > should definitely work and support the graphics console, if you have > XL graphics. If you have XZ you are in trouble at the moment. I'll give that a whirl this eve hopefully. I have {Newport,XL} 24bit graphics. regards, -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: Sailing is fun, but scrubbing the decks is aardvark. -- Heard on Noahs' ark From owner-linux-mips@oss.sgi.com Mon Jun 19 13:43:37 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 13:43:27 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:59910 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Mon, 19 Jun 2000 13:43:09 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 2C8E2818; Mon, 19 Jun 2000 22:43:09 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 64DB88F73; Mon, 19 Jun 2000 13:43:00 -0700 (PDT) Date: Mon, 19 Jun 2000 13:43:00 -0700 From: Florian Lohoff To: Paul Jakma Cc: Keith M Wesolowski , Linux MIPS Subject: Re: linux/mips on cd? Message-ID: <20000619134300.A981@paradigm.rfc822.org> References: <20000619132251.D22137@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from paul@clubi.ie on Mon, Jun 19, 2000 at 09:30:35PM +0100 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 09:30:35PM +0100, Paul Jakma wrote: > On Mon, 19 Jun 2000, Keith M Wesolowski wrote: > > > SGI is bigendian. It does boot and there is a userland. I personally > > have even seen X working. > > > > that's using Xsgi isn't it? There is both - A Irix binary emulated X Server and a XFree 4 patch from Guido which uses the Newport console - Both are ONLY for the Indy ... > I'll give that a whirl this eve hopefully. I have {Newport,XL} 24bit > graphics. Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Mon Jun 19 13:44:27 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 13:44:06 -0700 Received: from [62.180.18.37] ([62.180.18.37]:7684 "EHLO lappi") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 13:44:00 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Mon, 19 Jun 2000 22:07:14 +0200 Date: Mon, 19 Jun 2000 22:07:14 +0200 From: Ralf Baechle To: linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Merge status Message-ID: <20000619220714.A20741@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing After merging with Alan's ac21 kernel I've sent our diffs of again several hundred kbs into small pieces and sent them to Alan. I've mailed several people about some of the more obscure pieces in CVS. Not counting these the left over diffs are now down to just 5kb, of which one will be hairy to merge. Ralf From owner-linux-mips@oss.sgi.com Mon Jun 19 15:01:37 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 15:01:27 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:56358 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 15:01:18 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id OAA07982 for ; Mon, 19 Jun 2000 14:56:20 -0700 (PDT) mail_from (gw@sers.s-sers.mb.edus.si) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id OAA49552 for ; Mon, 19 Jun 2000 14:59:32 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA21007 for ; Mon, 19 Jun 2000 14:57:44 -0700 (PDT) mail_from (gw@sers.s-sers.mb.edus.si) Received: from sers.s-sers.mb.edus.si (sers.s-sers.mb.edus.si [194.249.197.119]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA02293 for ; Mon, 19 Jun 2000 14:57:42 -0700 (PDT) mail_from (gw@sers.s-sers.mb.edus.si) Received: from localhost (gw@localhost) by sers.s-sers.mb.edus.si (8.8.5/8.8.5) with SMTP id XAA05994 for ; Mon, 19 Jun 2000 23:58:44 +0200 Date: Mon, 19 Jun 2000 23:58:44 +0200 (MET DST) From: Mitja Bezget To: linux@cthulhu.engr.sgi.com Subject: Mouse on Indy Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi! Is there a way to get the IndyMouse to work? What kind of mouse is that anyway? ps2? some kind of bus-mouse? What kernel options am I supposed to enable? I managed to build the X server quite a while ago (tnx for help), but its all kindof useless without the mouse... Are there any docs on this? How about Serial mouses? are they supported? AFAIK Indy uses a special 8pin serial port connector? Will my serial mouse work if I build an adapter? Are serial ports supported at all? later Mitja ..................................................... - -> Why did the blonde have square boobs? ... She forgot to take the tissue out of the box mitja@ekno.com From owner-linux-mips@oss.sgi.com Mon Jun 19 15:06:06 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 15:05:56 -0700 Received: from [62.180.18.37] ([62.180.18.37]:15108 "EHLO lappi") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 15:05:41 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 20 Jun 2000 00:04:55 +0200 Date: Tue, 20 Jun 2000 00:04:55 +0200 From: Ralf Baechle To: "Maciej W. Rozycki" Cc: Ralf Baechle , Harald Koerfgen , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: Icache coherency problems for R3400, DS5000/240 Message-ID: <20000620000455.B27454@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from macro@ds2.pg.gda.pl on Mon, Jun 19, 2000 at 11:31:27AM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 11:31:27AM +0200, Maciej W. Rozycki wrote: > Working on gdb I discovered a weird behaviour of my DS5000/240 -- under > unspecified circumstances there were spurious breakpoint traps happening > and some single-step breakpoints appeared persistent. The following patch > fixes these problems, making gdb fully reliable. > > Besides obvious bugfixes, it introduces two significant changes. First, > flush_icache_page() now performs what the name suggests, i.e. flushes the > instruction cache. Without this change ptrace(PTRACE_POKE*, ...) calls > are unreliable. Second, it changes the assumption of the icache line size > to a single word -- apparently, at least R3400 of DS5000/240 has an icache > with such a layout (DEC docs confirm it, indeed). Without this change, > there are problems with breakpoints placed at addresses equal 4 modulo 8. > > I vote for an immediate inclusion of these fixes. Looks good unless one of the R3000 gurus objects, so I'll add this right after my ac21 commit finishes. Ralf From owner-linux-mips@oss.sgi.com Mon Jun 19 15:14:26 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 15:14:06 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:55815 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 15:13:51 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id PAA01573 for ; Mon, 19 Jun 2000 15:18:56 -0700 (PDT) mail_from (wesolows@rotor.chem.unr.edu) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA24509 for ; Mon, 19 Jun 2000 15:13:18 -0700 (PDT) mail_from (wesolows@rotor.chem.unr.edu) Received: from rotor.chem.unr.edu (rotor.chem.unr.edu [134.197.32.176]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id PAA08996 for ; Mon, 19 Jun 2000 15:13:18 -0700 (PDT) mail_from (wesolows@rotor.chem.unr.edu) Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id PAA30510; Mon, 19 Jun 2000 15:13:09 -0700 Date: Mon, 19 Jun 2000 15:13:09 -0700 From: Keith M Wesolowski To: Mitja Bezget Cc: linux@cthulhu.engr.sgi.com Subject: Re: Mouse on Indy Message-ID: <20000619151309.A29509@chem.unr.edu> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from gw@sers.s-sers.mb.edus.si on Mon, Jun 19, 2000 at 11:58:44PM +0200 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 11:58:44PM +0200, Mitja Bezget wrote: > Is there a way to get the IndyMouse to work? What kind > of mouse is that anyway? ps2? some kind of bus-mouse? It's plain PS2. > What kernel options am I supposed to enable? I've always built with PS2 enabled only. Make sure you have /dev/psaux made too. Character, major 10, minor 1. It works for me. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Mon Jun 19 16:02:16 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 16:02:07 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:57173 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 16:01:50 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id PAA21332 for ; Mon, 19 Jun 2000 15:56:52 -0700 (PDT) mail_from (jsun@mvista.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id QAA78826 for ; Mon, 19 Jun 2000 16:01:18 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA46334 for ; Mon, 19 Jun 2000 15:59:28 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id PAA07184 for ; Mon, 19 Jun 2000 15:59:20 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id PAA19464; Mon, 19 Jun 2000 15:58:40 -0700 Message-ID: <394EA5A0.B882F66A@mvista.com> Date: Mon, 19 Jun 2000 15:58:40 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: R5000 support (specifically two-way set-associative cache...) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I looked into the R5000 support and have a couple of questions: 1. Is R5000, specifically NEC Vr5000, fully supported? I have seen CONFIG_CPU_R5000 defined, but it does not appear to do much. 2. Specifically, NEC Vr5000 has two-way set-associative cache. I browsed through the cache code, and got concerned that I don't see any code that seems to take care of that. Do I miss something? 3. I understand Geert has a port to DDB5074 (with Vr5000 CPU). Is this port completed (including all interrupts, PCI related stuff). Is this port reliable? Thanks a lot. Jun From owner-linux-mips@oss.sgi.com Mon Jun 19 16:47:46 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 16:47:26 -0700 Received: from kenton.algor.co.uk ([193.117.190.25]:36289 "EHLO kenton.algor.co.uk") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 16:47:17 -0700 Received: from mudchute.algor.co.uk (dom@mudchute.algor.co.uk [193.117.190.19]) by kenton.algor.co.uk (8.8.8/8.8.8) with ESMTP id AAA03429; Tue, 20 Jun 2000 00:46:12 +0100 (GMT/BST) Received: (from dom@localhost) by mudchute.algor.co.uk (8.8.5/8.8.5) id AAA03494; Tue, 20 Jun 2000 00:46:11 +0100 (BST) Date: Tue, 20 Jun 2000 00:46:11 +0100 (BST) Message-Id: <200006192346.AAA03494@mudchute.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Ralf Baechle Cc: "Maciej W. Rozycki" , Ralf Baechle , Harald Koerfgen , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: Icache coherency problems for R3400, DS5000/240 In-Reply-To: <20000620000455.B27454@bacchus.dhis.org> References: <20000620000455.B27454@bacchus.dhis.org> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > ... Second, it changes the assumption of the icache line size to a > > single word -- apparently, at least R3400 of DS5000/240 has an > > icache with such a layout (DEC docs confirm it, indeed). Yes, the original R3000 chip could be wired to produce the appearance of multi-word lines in its I-cache, and some derivative CPUs were built that way. Four was popular - I don't think anyone did 8. > > Besides obvious bugfixes, it introduces two significant changes. > > First, flush_icache_page() now performs what the name suggests, > > i.e. flushes the instruction cache. And while I'm here, I'll continue my lonely campaign. I suggest you don't say "flush" because nobody knows whether it means invalidate, write-back, or both[1]. Instead, say "invalidate", "writeback", or "both". Even if it means changing St Linus' function names... [1] well in this case we do, because this is an I-cache and R3000s only had write-through caches anyway. But you weren't going to stop there, were you? Dominic Algorithmics Ltd dom@algor.co.uk From owner-linux-mips@oss.sgi.com Mon Jun 19 16:53:07 2000 Received: by oss.sgi.com id ; Mon, 19 Jun 2000 16:52:46 -0700 Received: from [62.180.18.37] ([62.180.18.37]:29188 "EHLO lappi") by oss.sgi.com with ESMTP id ; Mon, 19 Jun 2000 16:52:34 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 20 Jun 2000 01:52:24 +0200 Date: Tue, 20 Jun 2000 01:52:24 +0200 From: Ralf Baechle To: Dominic Sweetman Cc: "Maciej W. Rozycki" , Harald Koerfgen , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: Icache coherency problems for R3400, DS5000/240 Message-ID: <20000620015224.A28725@bacchus.dhis.org> References: <20000620000455.B27454@bacchus.dhis.org> <200006192346.AAA03494@mudchute.algor.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <200006192346.AAA03494@mudchute.algor.co.uk>; from dom@algor.co.uk on Tue, Jun 20, 2000 at 12:46:11AM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 20, 2000 at 12:46:11AM +0100, Dominic Sweetman wrote: > And while I'm here, I'll continue my lonely campaign. I suggest you > don't say "flush" because nobody knows whether it means invalidate, > write-back, or both[1]. Instead, say "invalidate", "writeback", or > "both". Even if it means changing St Linus' function names... Sigh, I tried exactly this and got fire from the 68k fraction because they considered my naming ambigous. Ralf From owner-linux-mips@oss.sgi.com Tue Jun 20 01:47:13 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 01:47:03 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:34643 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 01:46:48 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id BAA19622 for ; Tue, 20 Jun 2000 01:41:45 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id BAA80080 for ; Tue, 20 Jun 2000 01:46:13 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be ([193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id BAA00344 for ; Tue, 20 Jun 2000 01:45:56 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id KAA19425; Tue, 20 Jun 2000 10:44:28 +0200 (MET DST) Date: Tue, 20 Jun 2000 10:44:28 +0200 (MET DST) From: Geert Uytterhoeven To: Jun Sun cc: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: Re: R5000 support (specifically two-way set-associative cache...) In-Reply-To: <394EA5A0.B882F66A@mvista.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, 19 Jun 2000, Jun Sun wrote: > 3. I understand Geert has a port to DDB5074 (with Vr5000 CPU). Is this > port completed (including all interrupts, PCI related stuff). Is this > port reliable? - Interrupts (both Nile4, PCI and ISA) are working. - PCI bus mastering doesn't work yet (I guess so because the Tulip driver doesn't work yet). - About reliability: I see random crashes, but they seem to happen on other platforms as well. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248638 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Tue Jun 20 02:08:44 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 02:08:33 -0700 Received: from belgarath.esg-guetersloh.mediapoint.de ([193.189.251.50]:60749 "HELO belgarath.esg-guetersloh.mediapoint.de") by oss.sgi.com with SMTP id ; Tue, 20 Jun 2000 02:08:18 -0700 Received: by belgarath.esg-guetersloh.mediapoint.de (Postfix, from userid 1000) id 0C86B51317; Tue, 20 Jun 2000 11:08:21 +0200 (CEST) Date: Tue, 20 Jun 2000 11:08:21 +0200 From: Jan-Benedict Glaw To: linux-mips@oss.sgi.com Cc: engel@unix-ag.org Subject: Kernel image is not executable? Message-ID: <20000620110821.D32072@lug-owl.de> Reply-To: jbglaw@lug-owl.de Mail-Followup-To: linux-mips@oss.sgi.com, engel@unix-ag.org Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="iVCmgExH7+hIHJ1A" X-Mailer: Mutt 1.0i X-Operating-System: Linux belgarath.esg-guetersloh.mediapoint.de 2.0.35 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --iVCmgExH7+hIHJ1A Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi! I've recovered so far from my developement machine's hardware crash and can now start to tftp the kernel image: >> unsetenv netaddr >> boot bootp()vmlinuz.ip12 167120+81888+319472 entry: 0x80700c90 Setting $netaddr to 192.168.1.3 (from server ) bootp()vmlinuz.ip12: is not an executable file Can't load bootp()vmlinuz.ip12 Only the first 2x512 Bytes are transferred. [root@air:/tftpboot] #> uname -a Linux air 2.4.0-test1-ac18 #2 Thu Jun 15 07:58:27 CEST 2000 alpha unknown # This is an up-to-date Potato system [root@air:/tftpboot] #> file * unix: MIPSEB COFF executable (impure) not stripped - version 3.18 vmlinuz.ip12: MIPSEB COFF executable stripped - version 0.0 "unix" is my IRIX5.2 kernel. Just as a guess, I changes the version stamp to reflect 3.18 -- no success. I fixed the TEXT entry in =2E/linux/arch/mips/Makefile to the above value as well, but what does make a tftp'ed file executable in Indigo's eyes? MfG, JBG --=20 Fehler eingestehen, Gr=F6=DFe zeigen: Nehmt die Rechtschreibreform zur=FCck= !!! /* Jan-Benedict Glaw -- +49-177-5601720 */ keyID=3D0x8399E1BB fingerprint=3D250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 83= 99 E1BB "insmod vi.o and there we go..." (Alexander Viro on linux-kernel) --iVCmgExH7+hIHJ1A Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.1 (GNU/Linux) Comment: For info see http://www.gnupg.org iEYEAREBAAYFAjlPNIUACgkQHb1edYOZ4btH8gCgiMLlasG3G4FlT57FTW2F4QoE LqYAn0Si59mGd/TEIDgo8WpS32G1Ify2 =uw1z -----END PGP SIGNATURE----- --iVCmgExH7+hIHJ1A-- From owner-linux-mips@oss.sgi.com Tue Jun 20 02:49:05 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 02:48:45 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:17001 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 02:48:11 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id CAA23783 for ; Tue, 20 Jun 2000 02:43:13 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA90317 for ; Tue, 20 Jun 2000 02:47:34 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from kenton.algor.co.uk (kenton.algor.co.uk [193.117.190.25]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA00113 for ; Tue, 20 Jun 2000 02:47:33 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from mudchute.algor.co.uk (dom@mudchute.algor.co.uk [193.117.190.19]) by kenton.algor.co.uk (8.8.8/8.8.8) with ESMTP id KAA00421; Tue, 20 Jun 2000 10:47:42 +0100 (GMT/BST) Received: (from dom@localhost) by mudchute.algor.co.uk (8.8.5/8.8.5) id KAA08574; Tue, 20 Jun 2000 10:47:42 +0100 (BST) Date: Tue, 20 Jun 2000 10:47:42 +0100 (BST) Message-Id: <200006200947.KAA08574@mudchute.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Jun Sun Cc: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com, nigel@algor.co.uk Subject: Re: R5000 support (specifically two-way set-associative cache...) In-Reply-To: <394EA5A0.B882F66A@mvista.com> References: <394EA5A0.B882F66A@mvista.com> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Jun Sun (jsun@mvista.com) writes: > 2. Specifically, NEC Vr5000 has two-way set-associative cache. I > browsed through the cache code, and got concerned that I don't see any > code that seems to take care of that. Do I miss something? The two-way cache on the R5000 (and its R4600 parent) is implemented so that the cache operations used during running don't have to know about the cache organisation. Even initialisation of an R5000 cache can be done by a piece of code which has no reference to two-wayness and just works over R4x00/R5000 CPUs. So this is not *necessarily* a problem. > 3. I understand Geert has a port to DDB5074 (with Vr5000 CPU). Is this > port completed (including all interrupts, PCI related stuff). Is this > port reliable? A note on this and Geert's response: early Vrc5074 system controller chips had lots of bugs, with some particularly nasty ones hitting PCI transfers with external initiators (like the ethernet chip). Anyone pioneering Linux on it should check carefully with NEC about the status of their particular revision. Dominic Sweetman Algorithmics Ltd dom@algor.co.uk From owner-linux-mips@oss.sgi.com Tue Jun 20 03:06:35 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 03:06:25 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:64071 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 03:06:09 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id DAA09138 for ; Tue, 20 Jun 2000 03:11:17 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id DAA74617 for ; Tue, 20 Jun 2000 03:05:38 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id DAA95228 for ; Tue, 20 Jun 2000 03:03:28 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id DAA03553 for ; Tue, 20 Jun 2000 03:03:23 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id MAA21773; Tue, 20 Jun 2000 12:02:41 +0200 (MET DST) Date: Tue, 20 Jun 2000 12:02:41 +0200 (MET DST) From: Geert Uytterhoeven To: Dominic Sweetman cc: Jun Sun , linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com, nigel@algor.co.uk Subject: Re: R5000 support (specifically two-way set-associative cache...) In-Reply-To: <200006200947.KAA08574@mudchute.algor.co.uk> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 20 Jun 2000, Dominic Sweetman wrote: > Jun Sun (jsun@mvista.com) writes: > > 3. I understand Geert has a port to DDB5074 (with Vr5000 CPU). Is this > > port completed (including all interrupts, PCI related stuff). Is this > > port reliable? > > A note on this and Geert's response: early Vrc5074 system controller > chips had lots of bugs, with some particularly nasty ones hitting PCI > transfers with external initiators (like the ethernet chip). Anyone > pioneering Linux on it should check carefully with NEC about the > status of their particular revision. Since the same boards are fine running Aperios, I assume we don't have the early ones. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven ------------- Sony Software Development Center Europe (SDCE) Geert.Uytterhoeven@sonycom.com ------------------- Sint-Stevens-Woluwestraat 55 Voice +32-2-7248638 Fax +32-2-7262686 ---------------- B-1130 Brussels, Belgium From owner-linux-mips@oss.sgi.com Tue Jun 20 04:22:25 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 04:22:15 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:34061 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 04:22:00 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id EAA00536 for ; Tue, 20 Jun 2000 04:17:02 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id EAA07969 for ; Tue, 20 Jun 2000 04:21:27 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id EAA03079 for ; Tue, 20 Jun 2000 04:21:18 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id NAA24047; Tue, 20 Jun 2000 13:21:10 +0200 (MET DST) Date: Tue, 20 Jun 2000 13:21:10 +0200 (MET DST) From: Geert Uytterhoeven To: Linux kernel cc: Linux/PPC Development , Linux/MIPS Development Subject: Proposal: non-PC ISA bus support Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing The following patch fixes 2 problems related to ISA bus access on non-PC platforms: 1. ISA I/O space is memory mapped on many platforms (e.g. PPC and MIPS). To access it from user space, you cannot plainly use inb() and friends like on PC, but you have to mmap() the correct region of /dev/mem first. This region depends on the machine type and currently there's no simple way to find out from user space. 2. ISA memory is not located at physical address 0 on many platforms (e.g. PPC and some MIPS boxes). This means you cannot e.g. use request_mem_region(0xa0000, 65536) to request the legacy VGA region. Solutions: 1. Provide /proc/bus/isa/map, which contains the ISA I/O and memory space mappings on machines where these are memory mapped. Example (on PPC CHRP LongTrail): callisto$ cat /proc/bus/isa/map f8000000 01000000 IO f7000000 01000000 MEM callisto$ The region marked `IO' is ISA (also PCI) I/O space, while the region marked `MEM' is ISA memory space. Of course on a PC the first one is not available because there are separate I/O and memory spaces on ia32. 2. Provide new resource management functions for ISA memory space: isa_request_mem_region() isa_check_mem_region() isa_release_mem_region() On ia32, these are identical to the normal memory resource management functions. [ Alternatively we could add tests to the *_mem_region() functions to test whether the requested region is < 16 MB (and thus in ISA memory space) and add the required offset. But this affects the common resource code and may cause problems on machines where there is no ISA space in the first 16 MB of memory space. ] The patch contains support for ia32, PPC and MIPS (limited to DDB Vrc-5074). It was tested on PPC only. Comments are welcomed! diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/Makefile geert-isa-2.4.0-test1-ac21/Makefile --- alan-2.4.0-test1-ac21/Makefile Sun Jun 18 21:14:12 2000 +++ geert-isa-2.4.0-test1-ac21/Makefile Tue Jun 20 11:37:11 2000 @@ -152,6 +152,7 @@ DRIVERS-$(CONFIG_SOUND) += drivers/sound/sounddrivers.o DRIVERS-$(CONFIG_PCI) += drivers/pci/pci.a +DRIVERS-$(CONFIG_ISA) += drivers/isa/isa.o DRIVERS-$(CONFIG_PCMCIA) += drivers/pcmcia/pcmcia.o DRIVERS-$(CONFIG_PCMCIA_NETCARD) += drivers/net/pcmcia/pcmcia_net.o DRIVERS-$(CONFIG_PCMCIA_CHRDEV) += drivers/char/pcmcia/pcmcia_char.o diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/arch/ppc/config.in geert-isa-2.4.0-test1-ac21/arch/ppc/config.in --- alan-2.4.0-test1-ac21/arch/ppc/config.in Sun Jun 18 21:14:15 2000 +++ geert-isa-2.4.0-test1-ac21/arch/ppc/config.in Tue Jun 20 11:30:40 2000 @@ -88,7 +88,11 @@ mainmenu_option next_comment comment 'General setup' -define_bool CONFIG_ISA n +if [ "$CONFIG_ALL_PPC" ]; then + define_bool CONFIG_ISA y +else + define_bool CONFIG_ISA n +fi define_bool CONFIG_SBUS n if [ "$CONFIG_APUS" = "y" -o "$CONFIG_4xx" = "y" -o \ diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/drivers/Makefile geert-isa-2.4.0-test1-ac21/drivers/Makefile --- alan-2.4.0-test1-ac21/drivers/Makefile Wed Mar 15 19:50:30 2000 +++ geert-isa-2.4.0-test1-ac21/drivers/Makefile Sun Jun 18 21:35:06 2000 @@ -11,7 +11,7 @@ MOD_SUB_DIRS := $(SUB_DIRS) ALL_SUB_DIRS := $(SUB_DIRS) pci sgi ide scsi sbus cdrom isdn pnp i2o \ ieee1394 macintosh video dio zorro fc4 \ - usb nubus tc atm pcmcia i2c telephony + usb nubus tc atm pcmcia i2c telephony isa ifdef CONFIG_DIO SUB_DIRS += dio @@ -20,6 +20,10 @@ ifdef CONFIG_PCI SUB_DIRS += pci +endif + +ifdef CONFIG_ISA +SUB_DIRS += isa endif ifeq ($(CONFIG_PCMCIA),y) diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/drivers/isa/Makefile geert-isa-2.4.0-test1-ac21/drivers/isa/Makefile --- alan-2.4.0-test1-ac21/drivers/isa/Makefile Thu Jan 1 01:00:00 1970 +++ geert-isa-2.4.0-test1-ac21/drivers/isa/Makefile Tue Jun 20 11:38:14 2000 @@ -0,0 +1,19 @@ +# +# Makefile for the ISA bus specific drivers. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# +# Note 2! The CFLAGS definition is now inherited from the +# parent makefile. +# + +O_TARGET := isa.o + +ifdef CONFIG_PROC_FS +O_OBJS += proc.o +endif + +include $(TOPDIR)/Rules.make + diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/drivers/isa/proc.c geert-isa-2.4.0-test1-ac21/drivers/isa/proc.c --- alan-2.4.0-test1-ac21/drivers/isa/proc.c Thu Jan 1 01:00:00 1970 +++ geert-isa-2.4.0-test1-ac21/drivers/isa/proc.c Tue Jun 20 11:37:11 2000 @@ -0,0 +1,42 @@ +/* + * Procfs interface for the ISA bus. + * + * Copyright (c) 2000 Geert Uytterhoeven + */ + +#include +#include +#include +#include + +#include + +static int get_isa_map_info(char *buf, char **start, off_t pos, int count) +{ + int len = 0, cnt = 0; + + if (proc_bus_isa_io_size) + len += sprintf(buf+len, "%p\t%p\tIO\n", + (void *)proc_bus_isa_io_base, + (void *)proc_bus_isa_io_size); + if (proc_bus_isa_mem_size) + len += sprintf(buf+len, "%p\t%p\tMEM\n", + (void *)proc_bus_isa_mem_base, + (void *)proc_bus_isa_mem_size); + if (pos <= len) { + *start = buf+pos; + cnt = len-pos; + } + return (count > cnt) ? cnt : count; +} + +static struct proc_dir_entry *proc_bus_isa_dir; + +static int __init isa_proc_init(void) +{ + proc_bus_isa_dir = proc_mkdir("isa", proc_bus); + create_proc_info_entry("map", 0, proc_bus_isa_dir, get_isa_map_info); + return 0; +} + +__initcall(isa_proc_init); diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/drivers/video/clgenfb.c geert-isa-2.4.0-test1-ac21/drivers/video/clgenfb.c --- alan-2.4.0-test1-ac21/drivers/video/clgenfb.c Sun Jun 18 21:14:44 2000 +++ geert-isa-2.4.0-test1-ac21/drivers/video/clgenfb.c Sun Jun 18 21:33:38 2000 @@ -2541,7 +2541,7 @@ release_mem_region(info->fbmem_phys, info->size); #if 0 /* if system didn't claim this region, we would... */ - release_mem_region(0xA0000, 65535); + isa_release_mem_region(0xA0000, 65535); #endif if (release_io_ports) @@ -2624,7 +2624,7 @@ return -1; } #if 0 /* if the system didn't claim this region, we would... */ - if (!request_mem_region(0xA0000, 65535, "clgenfb")) { + if (!isa_request_mem_region(0xA0000, 65535, "clgenfb")) { pci_write_config_word (pdev, PCI_COMMAND, tmp16); printk(KERN_ERR "clgen: cannot reserve region 0x%lx, abort\n", 0xA0000L); diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/include/asm-i386/io.h geert-isa-2.4.0-test1-ac21/include/asm-i386/io.h --- alan-2.4.0-test1-ac21/include/asm-i386/io.h Tue Feb 15 21:49:25 2000 +++ geert-isa-2.4.0-test1-ac21/include/asm-i386/io.h Tue Jun 20 13:10:11 2000 @@ -195,6 +195,11 @@ */ #define __ISA_IO_base ((char *)(PAGE_OFFSET)) +#define proc_bus_isa_io_base (0) /* no MMIO */ +#define proc_bus_isa_io_size (0) /* no MMIO */ +#define proc_bus_isa_mem_base (0x00000000) +#define proc_bus_isa_mem_size (0x01000000) + #define isa_readb(a) readb(__ISA_IO_base + (a)) #define isa_readw(a) readw(__ISA_IO_base + (a)) #define isa_readl(a) readl(__ISA_IO_base + (a)) @@ -204,6 +209,10 @@ #define isa_memset_io(a,b,c) memset_io(__ISA_IO_base + (a),(b),(c)) #define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),__ISA_IO_base + (b),(c)) #define isa_memcpy_toio(a,b,c) memcpy_toio(__ISA_IO_base + (a),(b),(c)) + +#define isa_request_mem_region request_mem_region +#define isa_check_mem_region check_mem_region +#define isa_release_mem_region release_mem_region /* diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/include/asm-mips/io.h geert-isa-2.4.0-test1-ac21/include/asm-mips/io.h --- alan-2.4.0-test1-ac21/include/asm-mips/io.h Fri Mar 3 18:22:38 2000 +++ geert-isa-2.4.0-test1-ac21/include/asm-mips/io.h Mon Jun 19 20:39:24 2000 @@ -16,6 +16,7 @@ */ #undef CONF_SLOWDOWN_IO +#include #include /* @@ -112,6 +113,24 @@ * for the processor. */ extern unsigned long isa_slot_offset; + +#define proc_bus_isa_io_base mips_io_port_base +#define proc_bus_isa_mem_base isa_slot_offset + +#if defined(CONFIG_DDB5074) /* and a few others... */ +#define proc_bus_isa_io_size (0x01000000) +#define proc_bus_isa_mem_size (0x01000000) +#else +#define proc_bus_isa_io_size (0) +#define proc_bus_isa_mem_size (0) +#endif + +#define isa_request_mem_region(start,n,name) \ + request_mem_region(isa_slot_offset+(start),(n),(name)) +#define isa_check_mem_region(start,n) \ + check_mem_region(isa_slot_offset+(start),(n)) +#define isa_release_mem_region(start,n) \ + release_mem_region(isa_slot_offset+(start),(n)) /* * readX/writeX() are used to access memory mapped devices. On some diff -u --recursive --exclude-from=/home/geert/diff-excludes-linux --new-file alan-2.4.0-test1-ac21/include/asm-ppc/io.h geert-isa-2.4.0-test1-ac21/include/asm-ppc/io.h --- alan-2.4.0-test1-ac21/include/asm-ppc/io.h Sun Jun 18 21:14:53 2000 +++ geert-isa-2.4.0-test1-ac21/include/asm-ppc/io.h Mon Jun 19 20:13:07 2000 @@ -30,6 +30,10 @@ #define _IO_BASE 0 #define _ISA_MEM_BASE 0 #define PCI_DRAM_OFFSET 0 +#define proc_bus_isa_io_base (0) +#define proc_bus_isa_io_size (0) +#define proc_bus_isa_mem_base (0) +#define proc_bus_isa_mem_size (0) #else extern unsigned long isa_io_base; extern unsigned long isa_mem_base; @@ -37,6 +41,10 @@ #define _IO_BASE isa_io_base #define _ISA_MEM_BASE isa_mem_base #define PCI_DRAM_OFFSET pci_dram_offset +#define proc_bus_isa_io_base isa_io_base +#define proc_bus_isa_io_size (0x01000000) +#define proc_bus_isa_mem_base isa_mem_base +#define proc_bus_isa_mem_size (0x01000000) #endif /* CONFIG_APUS */ #endif @@ -53,6 +61,23 @@ #define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) #define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) #endif + +#define isa_readb(a) readb(isa_mem_base+(a)) +#define isa_readw(a) readw(isa_mem_base+(a)) +#define isa_readl(a) readl(isa_mem_base+(a)) +#define isa_writeb(b,a) writeb(b,isa_mem_base+(a)) +#define isa_writew(w,a) writeb(w,isa_mem_base+(a)) +#define isa_writel(l,a) writeb(l,isa_mem_base+(a)) +#define isa_memset_io(a,b,c) memset_io(isa_mem_base+(a),(b),(c)) +#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),isa_mem_base+(b),(c)) +#define isa_memcpy_toio(a,b,c) memcpy_toio(isa_mem_base+(a),(b),(c)) + +#define isa_request_mem_region(start,n,name) \ + request_mem_region(isa_mem_base+(start),(n),(name)) +#define isa_check_mem_region(start,n) \ + check_mem_region(isa_mem_base+(start),(n)) +#define isa_release_mem_region(start,n) \ + release_mem_region(isa_mem_base+(start),(n)) /* * The insw/outsw/insl/outsl macros don't do byte-swapping. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Tue Jun 20 04:27:04 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 04:26:55 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:41290 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 04:26:36 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id EAA02844 for ; Tue, 20 Jun 2000 04:31:46 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id EAA11544 for ; Tue, 20 Jun 2000 04:26:08 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: by calypso.engr.sgi.com (Postfix, from userid 37984) id 15253A7875; Tue, 20 Jun 2000 04:25:25 -0700 (PDT) From: Ulf Carlsson MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14671.21669.3126.181895@calypso.engr.sgi.com> Date: Tue, 20 Jun 2000 04:25:25 -0700 (PDT) To: linux-mips@oss.sgi.com Subject: MIPS symbol versioning patches X-Mailer: VM 6.75 under Emacs 20.5.1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi Guys, I have synced the binutils CVS with symbol versioning patches. The current CVS tree at http://sourceware.cygnus.com/binutils should work now. I have only tested compile and tests from glibc 2.1.90 so things will probably break badly. I will be away from my office the next five days, and I will unfortunately not have any machine to work on. I have verified with glibc CVS from today, glibc 2.96 CVS from today and binutils CVS from today. Ulf From owner-linux-mips@oss.sgi.com Tue Jun 20 05:24:05 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 05:23:55 -0700 Received: from mail.exfo.com ([206.191.88.36]:47370 "EHLO mail.exfo.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 05:23:39 -0700 Received: from exfo.com ([172.16.46.216]) by mail.exfo.com (Netscape Messaging Server 3.62) with ESMTP id 152 for ; Tue, 20 Jun 2000 08:21:45 -0400 Message-ID: <394F62E6.50B7F424@exfo.com> Date: Tue, 20 Jun 2000 08:26:14 -0400 From: "Philippe Chauvat" X-Mailer: Mozilla 4.7 [en] (WinNT; I) X-Accept-Language: fr,en MIME-Version: 1.0 To: Linux Mips Subject: [Kernel Panic] Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello there, I made a mistake. It's not an Challenge but an Indy station. This is a part of the real message. Please, let me know if some information are missing. The version of vmlinux is the HardRat one. >>> Begin Primary o,struction cache Primary data cache Secondary data cache Linux version 2.1 MC: SG memory controller revision 3 [...] Partition check sda: sda1 sda2 sda3 Looking up port RPC 100003/2 on 192.0.2.1 Looking up port on RPC 100005/1 on 192.0.2.1 VFS: mounted root (nfs filesystem) Adv: done running setup() Freeing unused kernel memory: 44k freed pag fault from irq handler: 0000 $0 : 00000000 [...] $4 : 00000000 [...] [...] $20: 00000000 88009d90 0000000e 880e3f38 epc: 880e3e74 Status: 1004fc02 Cause : 0000000 Aiee, killing interrupt handler Kernel panic: Attempted to kill idle task! In swapper task - not syncing <<< End After that, I've dowloaded a new version of kernel for Indy (ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/kernels/, information found on this list) but now the problem is a /tmp creation (Create 100Mb partition on ramdisk...) Thank you for any help. Philippe From owner-linux-mips@oss.sgi.com Tue Jun 20 05:24:44 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 05:24:35 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:36172 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 05:24:20 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id FAA02053 for ; Tue, 20 Jun 2000 05:29:27 -0700 (PDT) mail_from (bh40@calva.net) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id FAA21641 for ; Tue, 20 Jun 2000 05:23:46 -0700 (PDT) mail_from (bh40@calva.net) Received: from [62.161.177.33] (mailhost.mipsys.com [62.161.177.33]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id FAA05433 for ; Tue, 20 Jun 2000 05:23:43 -0700 (PDT) mail_from (bh40@calva.net) Received: from [192.168.1.19] by [192.168.1.2] with SMTP (QuickMail Pro Server for Mac 2.0); 20 JUN 00 14:25:21 UT From: Benjamin Herrenschmidt To: Geert Uytterhoeven , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support Date: Tue, 20 Jun 2000 14:23:29 +0200 Message-Id: <20000620122329.13473@mailhost.mipsys.com> In-Reply-To: References: X-Mailer: CTM PowerMail 3.0.3 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 20, 2000, Geert Uytterhoeven wrote: > 1. Provide /proc/bus/isa/map, which contains the ISA I/O and memory space > mappings on machines where these are memory mapped. > > Example (on PPC CHRP LongTrail): > > callisto$ cat /proc/bus/isa/map > f8000000 01000000 IO > f7000000 01000000 MEM > callisto$ Looks fine except for one thing: How can we handle weird HW (like Apple Uni-N bridge) that has actually 3 different IO spaces at different locations (all of them beeing childs of the same PCI bus). This is more or less related since the ISA iospace can be considered as a subset of the PCI IO space. The problem is generic (it happens with both "pure" PCI drivers doing IOs and ISA drivers doing IOs). The problem exist for both the kernel and userland apps like XFree wanting to do PCI or ISA IOs. The kernel has a built-in IO-base, your patch would expose it to userland fixing part of the problem for XFree (so userland don't have to probe for zillion different bridges) but wouldn't solve the problem of multiple busses. Paul suggested mapping them one after each other in a single contiguous region (with the appropriate fixup in the kernel PCI io resources) but this can work only for PCI IOs (drivers using the io resource base). Drivers hard-coding legacy IO addresses will still not work (except if they are on the first bus). We still can decide (and that's what I currently do in the kernel) that IO space is only supported on one of those 3 busses (the one on which the external PCI is). This prevents however use of IOs on the AGP slot, which is a problem for things like XFree who may try to use VGA addresses on the card. I still don't have a clue about a good solution to this issue. Apple solves it in their kernel by having an object oriented bus structure, each device asking for mappings to their parent bridge, based on the device tree and independently of PCI bus numbers. Ben. From owner-linux-mips@oss.sgi.com Tue Jun 20 05:42:46 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 05:42:36 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:7501 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 05:42:28 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id FAA05998 for ; Tue, 20 Jun 2000 05:47:36 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id FAA24223 for ; Tue, 20 Jun 2000 05:41:46 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id FAA09259 for ; Tue, 20 Jun 2000 05:41:40 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id OAA26741; Tue, 20 Jun 2000 14:41:35 +0200 (MET DST) Date: Tue, 20 Jun 2000 14:41:34 +0200 (MET DST) From: Geert Uytterhoeven To: Benjamin Herrenschmidt cc: Linux/PPC Development , Linux/MIPS Development , Linux kernel Subject: Re: Proposal: non-PC ISA bus support In-Reply-To: <20000620122329.13473@mailhost.mipsys.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 20 Jun 2000, Benjamin Herrenschmidt wrote: > On Tue, Jun 20, 2000, Geert Uytterhoeven > wrote: > > > 1. Provide /proc/bus/isa/map, which contains the ISA I/O and memory space > > mappings on machines where these are memory mapped. > > > > Example (on PPC CHRP LongTrail): > > > > callisto$ cat /proc/bus/isa/map > > f8000000 01000000 IO > > f7000000 01000000 MEM > > callisto$ > > Looks fine except for one thing: How can we handle weird HW (like Apple > Uni-N bridge) that has actually 3 different IO spaces at different > locations (all of them beeing childs of the same PCI bus). AFAIK this is a violation of the PCI spec. But of course that doesn't help you much. > This is more or less related since the ISA iospace can be considered as a > subset of the PCI IO space. The problem is generic (it happens with both > "pure" PCI drivers doing IOs and ISA drivers doing IOs). The problem > exist for both the kernel and userland apps like XFree wanting to do PCI > or ISA IOs. The kernel has a built-in IO-base, your patch would expose it > to userland fixing part of the problem for XFree (so userland don't have > to probe for zillion different bridges) but wouldn't solve the problem of > multiple busses. > > Paul suggested mapping them one after each other in a single contiguous > region (with the appropriate fixup in the kernel PCI io resources) but > this can work only for PCI IOs (drivers using the io resource base). > Drivers hard-coding legacy IO addresses will still not work (except if > they are on the first bus). Concatenating the I/O spaces seems like the best solution to me as well. > We still can decide (and that's what I currently do in the kernel) that > IO space is only supported on one of those 3 busses (the one on which the > external PCI is). This prevents however use of IOs on the AGP slot, which > is a problem for things like XFree who may try to use VGA addresses on > the card. > I still don't have a clue about a good solution to this issue. Apple > solves it in their kernel by having an object oriented bus structure, > each device asking for mappings to their parent bridge, based on the > device tree and independently of PCI bus numbers. Hmmm... If you can live with only one video card with legacy support, what about a kernel option to specify which of the 3 busses will be the first? Else, we'll have to work around this in XFree86. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Tue Jun 20 05:53:35 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 05:53:25 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:60887 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 05:53:14 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id OAA26033; Tue, 20 Jun 2000 14:50:06 +0200 (MET DST) Date: Tue, 20 Jun 2000 14:50:05 +0200 (MET DST) From: "Maciej W. Rozycki" To: Dominic Sweetman cc: Ralf Baechle , Ralf Baechle , Harald Koerfgen , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: Icache coherency problems for R3400, DS5000/240 In-Reply-To: <200006192346.AAA03494@mudchute.algor.co.uk> Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 20 Jun 2000, Dominic Sweetman wrote: > Yes, the original R3000 chip could be wired to produce the appearance > of multi-word lines in its I-cache, and some derivative CPUs were built > that way. Four was popular - I don't think anyone did 8. DEC docs claim the cache subsystem of KN03 is configured with single-word lines for the icache, but upon an icache fill the MB ASIC fills four lines. > And while I'm here, I'll continue my lonely campaign. I suggest you > don't say "flush" because nobody knows whether it means invalidate, > write-back, or both[1]. Instead, say "invalidate", "writeback", or > "both". Even if it means changing St Linus' function names... OK, by "flush" I always meant "invalidate" (see also ia32's invd and wbinvd instructions -- the first one causes an external flush cycle and the other one an external writeback cycle and then a flush cycle -- that's Intel's original naming). On the other hand, "invalidate" is surely not more ambiguous than "flush", so feel free to continue your campaign... ;-) -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Jun 20 06:04:05 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 06:03:55 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:27216 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 06:03:49 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id GAA08396 for ; Tue, 20 Jun 2000 06:08:57 -0700 (PDT) mail_from (bh40@calva.net) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id GAA30069 for ; Tue, 20 Jun 2000 06:03:16 -0700 (PDT) mail_from (bh40@calva.net) Received: from [62.161.177.33] (mailhost.mipsys.com [62.161.177.33]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id GAA00936 for ; Tue, 20 Jun 2000 06:03:05 -0700 (PDT) mail_from (bh40@calva.net) Received: from [192.168.1.19] by [192.168.1.2] with SMTP (QuickMail Pro Server for Mac 2.0); 20 JUN 00 15:04:28 UT From: Benjamin Herrenschmidt To: Geert Uytterhoeven Cc: Linux/PPC Development , Linux/MIPS Development , Linux kernel Subject: Re: Proposal: non-PC ISA bus support Date: Tue, 20 Jun 2000 15:02:38 +0200 Message-Id: <20000620130238.15357@mailhost.mipsys.com> In-Reply-To: References: X-Mailer: CTM PowerMail 3.0.3 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 20, 2000, Geert Uytterhoeven wrote: >Concatenating the I/O spaces seems like the best solution to me as well. Would work if the ranges you are passing via /proc/bus/isa/xxxx are kernel virtual addresses and not physical addresses (I didn't check if this is the case). >Hmmm... If you can live with only one video card with legacy support, what >about a kernel option to specify which of the 3 busses will be the first? I've been thinking about it. That would be a solution. Also, the fbdev's we use for cards in the AGP slot (ATI Rage 128 for now) can handle this fine, and XFree has already been more or less hacked when to handle it too when running on top of fbdev. >Else, we'll have to work around this in XFree86. Well, we'll have to find a workaround one way or another. The only solution I can see for this problem is a way for each individual card driver to "ask" the kernel for an iobase which is specific to this card, given in parameter as much infos as the driver can regarding the device (like the pci_dev for a pci device). The kernel would then be able to locate the device in the OF tree, walk the tree up to the nearest brige and figure out the correct IO range. (It already does something similar for config space accesses since we have the same problem of 3 different config space access registers). For in-kernel drivers, this can be done at the PCI fixup level provided that the driver uses the io resources given to it "as is", but exposing this to userland may require more than a /proc entry. Ben. From owner-linux-mips@oss.sgi.com Tue Jun 20 06:13:56 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 06:13:46 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:65078 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 06:13:23 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id GAA09035 for ; Tue, 20 Jun 2000 06:08:10 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id GAA75456 for ; Tue, 20 Jun 2000 06:11:21 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id GAA30985 for ; Tue, 20 Jun 2000 06:09:35 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id GAA05531 for ; Tue, 20 Jun 2000 06:09:15 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id PAA27880; Tue, 20 Jun 2000 15:09:23 +0200 (MET DST) Date: Tue, 20 Jun 2000 15:09:23 +0200 (MET DST) From: Geert Uytterhoeven To: Benjamin Herrenschmidt cc: Linux/PPC Development , Linux/MIPS Development , Linux kernel Subject: Re: Proposal: non-PC ISA bus support In-Reply-To: <20000620130238.15357@mailhost.mipsys.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 20 Jun 2000, Benjamin Herrenschmidt wrote: > On Tue, Jun 20, 2000, Geert Uytterhoeven wrote: > > >Concatenating the I/O spaces seems like the best solution to me as well. > > Would work if the ranges you are passing via /proc/bus/isa/xxxx are > kernel virtual addresses and not physical addresses (I didn't check if > this is the case). Oops, /proc/bus/isa/map talks about physical addresses. Workaround: patch the mmap() entry of /dev/mem. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Tue Jun 20 06:30:05 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 06:29:56 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:56145 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 06:29:35 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id GAA03110 for ; Tue, 20 Jun 2000 06:34:44 -0700 (PDT) mail_from (schrijvp@rc.bel.alcatel.be) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id GAA87880 for ; Tue, 20 Jun 2000 06:28:49 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id GAA34505 for ; Tue, 20 Jun 2000 06:26:43 -0700 (PDT) mail_from (schrijvp@rc.bel.alcatel.be) Received: from relay1.alcatel.be (alc119.alcatel.be [195.207.101.119]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id GAA00877 for ; Tue, 20 Jun 2000 06:26:32 -0700 (PDT) mail_from (schrijvp@rc.bel.alcatel.be) Received: from btmq9s.rc.bel.alcatel.be (localhost [127.0.0.1]) by relay1.alcatel.be (8.10.1/8.10.1) with ESMTP id e5KDPFP12835; Tue, 20 Jun 2000 15:25:15 +0200 (MET DST) Received: from btmxbh.rc.bel.alcatel.be (btmxbh [138.203.64.184]) by btmq9s.rc.bel.alcatel.be (8.8.8+Sun/8.8.8/1.1) with ESMTP id PAA28199; Tue, 20 Jun 2000 15:25:25 +0200 (MET DST) Received: (from schrijvp@localhost) by btmxbh.rc.bel.alcatel.be (8.9.3/8.9.3) id PAA09059; Tue, 20 Jun 2000 15:25:09 +0200 Date: Tue, 20 Jun 2000 15:25:09 +0200 From: De Schrijver Peter To: Benjamin Herrenschmidt Cc: Geert Uytterhoeven , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support Message-ID: <20000620152509.O1177@rc.bel.alcatel.be> References: <20000620122329.13473@mailhost.mipsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: <20000620122329.13473@mailhost.mipsys.com>; from bh40@calva.net on Tue, Jun 20, 2000 at 02:23:29PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, > We still can decide (and that's what I currently do in the kernel) that > IO space is only supported on one of those 3 busses (the one on which the > external PCI is). This prevents however use of IOs on the AGP slot, which > is a problem for things like XFree who may try to use VGA addresses on > the card. > Is this really a problem ? I would expect AGP cards to be fully addresseable via the I/O space assigned in the PCI IO resource base ? Peter. From owner-linux-mips@oss.sgi.com Tue Jun 20 06:41:55 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 06:41:46 -0700 Received: from news.tridsys.com ([207.86.66.211]:42770 "EHLO mailserver.tridsys.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 06:41:25 -0700 Received: from dull.tridsys.com (dull.tridsys.com [207.86.66.203]) by mailserver.tridsys.com (NTMail 4.30.0013/NY2276.00.00796d4c) with ESMTP id fweoaaaa for ; Tue, 20 Jun 2000 09:40:46 -0400 From: "Scott Thomas" To: "Geert Uytterhoeven" , "Florian Lohoff" Cc: "Paul Jakma" , "Linux MIPS" , Subject: RE: linux/mips on cd? Date: Tue, 20 Jun 2000 09:41:53 -0400 Message-ID: <002a01bfdabd$4b7c61a0$fe01a8c0@scott.tridsys.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Importance: Normal In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > [ taking CD from the CD rack ] > > [ citing CD cover ] > > Linux Rough Cuts > Excavated for PowerPC (MkLinux)m UltraSPARC, MIPS, and M68K > by the Red Hat > Linux Community > > Copyright 1998 Red Hat Software, Inc. > > It even has an ISBN number: 1-888172-14-2 :-) > > fyi... I recently inquired Red Hat about this... according to Cris Folmar at Red Hat, the Rough Cuts CD is no longer available. perhaps Red Hat should consider making a new version available? -- Scott Thomas Program Manager Trident Systems Inc. Phone: (703) 359-6226 Fax: (703) 273-6608 Email: scott@tridsys.com Web: http://www.tridsys.com > Now I have to admit there's no decent (read: Debian) distro for > Linux/MIPS on > CD yet... > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- > geert@linux-m68k.org > > In personal conversations with technical people, I call myself a > hacker. But > when I'm talking to journalists I just say "programmer" or > something like that. > -- > Linus Torvalds > > From owner-linux-mips@oss.sgi.com Tue Jun 20 06:46:15 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 06:45:55 -0700 Received: from kenton.algor.co.uk ([193.117.190.25]:42432 "EHLO kenton.algor.co.uk") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 06:45:50 -0700 Received: from mudchute.algor.co.uk (dom@mudchute.algor.co.uk [193.117.190.19]) by kenton.algor.co.uk (8.8.8/8.8.8) with ESMTP id OAA01492; Tue, 20 Jun 2000 14:45:46 +0100 (GMT/BST) Received: (from dom@localhost) by mudchute.algor.co.uk (8.8.5/8.8.5) id OAA08976; Tue, 20 Jun 2000 14:45:46 +0100 (BST) Date: Tue, 20 Jun 2000 14:45:46 +0100 (BST) Message-Id: <200006201345.OAA08976@mudchute.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: "Maciej W. Rozycki" Cc: Dominic Sweetman , Ralf Baechle , Ralf Baechle , Harald Koerfgen , linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Re: Icache coherency problems for R3400, DS5000/240 In-Reply-To: References: <200006192346.AAA03494@mudchute.algor.co.uk> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Maciej W. Rozycki (macro@ds2.pg.gda.pl) writes: > > Yes, the original R3000 chip could be wired to produce the appearance > > of multi-word lines in its I-cache, and some derivative CPUs were built > > that way. Four was popular - I don't think anyone did 8. > > DEC docs claim the cache subsystem of KN03 is configured with single-word > lines for the icache, but upon an icache fill the MB ASIC fills four > lines. Ah, I'm suffering from muddy memory syndrome. You're quite correct: on the R3000 cache every word had a tag, but an I-cache refill could be setup to fill several of them at once - implicitly storing the same tag in each position. I believe it was in theory possible to gently remove the two lowest tag addresses, use a smaller tag memory, and have a genuine four-data per tag I-cache. It would have behaved very strangely while swapped for diagnostics/maintenance. > OK, by "flush" I always meant "invalidate" (see also ia32's invd and > wbinvd instructions -- the first one causes an external flush > cycle... I should have realised that Linux ab-usages usually refer to x86 technology. Thanks for that. From owner-linux-mips@oss.sgi.com Tue Jun 20 08:47:06 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 08:46:46 -0700 Received: from delta.ds2.pg.gda.pl ([153.19.144.1]:51673 "EHLO delta.ds2.pg.gda.pl") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 08:46:39 -0700 Received: from localhost by delta.ds2.pg.gda.pl (8.9.3/8.9.3) with SMTP id RAA01540; Tue, 20 Jun 2000 17:36:12 +0200 (MET DST) Date: Tue, 20 Jun 2000 17:36:11 +0200 (MET DST) From: "Maciej W. Rozycki" To: Ralf Baechle , Ulf Carlsson , Andreas Jaeger cc: linux-mips@fnet.fr, linux-mips@oss.sgi.com Subject: Gdb 5.0 patches for MIPS/Linux Message-ID: Organization: Technical University of Gdansk MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, After a bit of work I have gdb 5.0 working on my mipsel-linux system. So far it seems to be stable. Compiled using gcc 2.95.2 and binutils 2.10, against glibc 2.1.90. Since patches are quite large I am not sending them here -- they are available at 'http://www.ds2.pg.gda.pl/~macro/'. They include ported changes to binutils and gdb that are otherwise available at oss.sgi.com. Are we going to submit changes from oss.sgi.com to gdb? I believe its the right moment now if we want them in gdb 5.1 -- I've seen an annoucement the release branch for 5.1 will start early in July. I've already submitted all other patches. Maciej -- + Maciej W. Rozycki, Technical University of Gdansk, Poland + +--------------------------------------------------------------+ + e-mail: macro@ds2.pg.gda.pl, PGP key available + From owner-linux-mips@oss.sgi.com Tue Jun 20 08:47:07 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 08:46:46 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:54136 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 08:46:32 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id IAA27052 for ; Tue, 20 Jun 2000 08:41:34 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id IAA67480 for ; Tue, 20 Jun 2000 08:46:02 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from u-150.karlsruhe.ipdial.viaginterkom.de (u-150.karlsruhe.ipdial.viaginterkom.de [62.180.19.150]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id IAA05307 for ; Tue, 20 Jun 2000 08:46:00 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Tue, 20 Jun 2000 03:51:59 +0200 Date: Tue, 20 Jun 2000 03:51:59 +0200 From: Ralf Baechle To: Jun Sun Cc: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: Re: R5000 support (specifically two-way set-associative cache...) Message-ID: <20000620035158.F28452@bacchus.dhis.org> References: <394EA5A0.B882F66A@mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <394EA5A0.B882F66A@mvista.com>; from jsun@mvista.com on Mon, Jun 19, 2000 at 03:58:40PM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 03:58:40PM -0700, Jun Sun wrote: > I looked into the R5000 support and have a couple of questions: > > 1. Is R5000, specifically NEC Vr5000, fully supported? I have seen > CONFIG_CPU_R5000 defined, but it does not appear to do much. Indeed, the various CPU options for the R4xxx / R5xxx CPUs mostly deal with C compiler options as a minor optimization. > 2. Specifically, NEC Vr5000 has two-way set-associative cache. I > browsed through the cache code, and got concerned that I don't see any > code that seems to take care of that. Do I miss something? Yes :-) The R5000 has R4600 style caches, so also uses the same code. > 3. I understand Geert has a port to DDB5074 (with Vr5000 CPU). Is this > port completed (including all interrupts, PCI related stuff). Is this > port reliable? I leave the question to Geert to answer. Ralf From owner-linux-mips@oss.sgi.com Tue Jun 20 10:13:57 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 10:13:37 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:52079 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 10:13:26 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id KAA09016 for ; Tue, 20 Jun 2000 10:18:33 -0700 (PDT) mail_from (bh40@calva.net) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA94439 for ; Tue, 20 Jun 2000 10:12:52 -0700 (PDT) mail_from (bh40@calva.net) Received: from [62.161.177.33] (mailhost.mipsys.com [62.161.177.33]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA09483 for ; Tue, 20 Jun 2000 10:12:47 -0700 (PDT) mail_from (bh40@calva.net) Received: from [192.168.1.19] by [192.168.1.2] with SMTP (QuickMail Pro Server for Mac 2.0); 20 JUN 00 15:32:09 UT From: Benjamin Herrenschmidt To: De Schrijver Peter Cc: Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support Date: Tue, 20 Jun 2000 15:30:01 +0200 Message-Id: <20000620133001.23202@mailhost.mipsys.com> In-Reply-To: <20000620152509.O1177@rc.bel.alcatel.be> References: <20000620152509.O1177@rc.bel.alcatel.be> X-Mailer: CTM PowerMail 3.0.3 MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 20, 2000, De Schrijver Peter wrote: >> We still can decide (and that's what I currently do in the kernel) that >> IO space is only supported on one of those 3 busses (the one on which the >> external PCI is). This prevents however use of IOs on the AGP slot, which >> is a problem for things like XFree who may try to use VGA addresses on >> the card. >> > >Is this really a problem ? I would expect AGP cards to be fully >addresseable via >the I/O space assigned in the PCI IO resource base ? But even that doesn't work. If it's a kernel driver, then we can fixup the io resources passed by the new kernel resources mecanism to handle the IO base of this specific card. But this won't for userland. I mean, if you read the PCI IO resource base from the card's config space, then you have an IO address on which you need to add an iobase (the base at which the IO bus is mapped). The problem is how to figure out this IO base, especially since the machine has several IO busses at different addresses, but all of them on the same PCI bus number (it's actually 3 separate busses with the same bus number). The kernel can figure this out from the dev_fn since there's fortunately no overlap of dev_fn's between those busses. But how to translate this to userland ? Ben. From owner-linux-mips@oss.sgi.com Tue Jun 20 10:15:07 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 10:14:57 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:29741 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 10:14:44 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA09917 for ; Tue, 20 Jun 2000 10:09:44 -0700 (PDT) mail_from (frank_rowand@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA95018 for ; Tue, 20 Jun 2000 10:14:11 -0700 (PDT) mail_from (frank_rowand@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA09915 for ; Tue, 20 Jun 2000 10:14:06 -0700 (PDT) mail_from (frank_rowand@mvista.com) Received: from mvista.com (IDENT:frowand@mossi.mvista.com [10.0.0.71]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id KAA31112; Tue, 20 Jun 2000 10:11:46 -0700 Message-ID: <394FA5D1.DDAEA1F6@mvista.com> Date: Tue, 20 Jun 2000 10:11:45 -0700 From: Frank Rowand Reply-To: frowand@mvista.com Organization: Montavista Software, Inc X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: Geert Uytterhoeven CC: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Geert Uytterhoeven wrote: > > The following patch fixes 2 problems related to ISA bus access on non-PC > platforms: > > 1. ISA I/O space is memory mapped on many platforms (e.g. PPC and MIPS). To > access it from user space, you cannot plainly use inb() and friends like on > PC, but you have to mmap() the correct region of /dev/mem first. This > region depends on the machine type and currently there's no simple way to > find out from user space. > > 2. ISA memory is not located at physical address 0 on many platforms (e.g. PPC > and some MIPS boxes). This means you cannot e.g. use > request_mem_region(0xa0000, 65536) to request the legacy VGA region. > > Solutions: > > 1. Provide /proc/bus/isa/map, which contains the ISA I/O and memory space > mappings on machines where these are memory mapped. > > Example (on PPC CHRP LongTrail): > > callisto$ cat /proc/bus/isa/map > f8000000 01000000 IO > f7000000 01000000 MEM > callisto$ > > The region marked `IO' is ISA (also PCI) I/O space, while the region marked > `MEM' is ISA memory space. Of course on a PC the first one is not > available because there are separate I/O and memory spaces on ia32. > > 2. Provide new resource management functions for ISA memory space: > > isa_request_mem_region() > isa_check_mem_region() > isa_release_mem_region() > > On ia32, these are identical to the normal memory resource management > functions. > > [ Alternatively we could add tests to the *_mem_region() functions to test > whether the requested region is < 16 MB (and thus in ISA memory space) > and add the required offset. But this affects the common resource code > and may cause problems on machines where there is no ISA space in the > first 16 MB of memory space. ] > > The patch contains support for ia32, PPC and MIPS (limited to DDB Vrc-5074). > It was tested on PPC only. > > Comments are welcomed! Would it make sense to apply the same sort of fix to the following code in __ioremap(), so that ISA space is handled consistently?: /* * If the address lies within the first 16 MB, assume it's in ISA * memory space */ if (p < 16*1024*1024) p += _ISA_MEM_BASE; < patch deleted > > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds > > ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/ -Frank -- Frank Rowand MontaVista Software, Inc From owner-linux-mips@oss.sgi.com Tue Jun 20 10:30:28 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 10:30:08 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:6708 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 10:29:37 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA11953 for ; Tue, 20 Jun 2000 10:24:39 -0700 (PDT) mail_from (geert@linux-m68k.org) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA96851 for ; Tue, 20 Jun 2000 10:29:07 -0700 (PDT) mail_from (geert@linux-m68k.org) Received: from aeon.tvd.be (aeon.tvd.be [195.162.196.20]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA00478 for ; Tue, 20 Jun 2000 10:29:06 -0700 (PDT) mail_from (geert@linux-m68k.org) Received: from callisto.of.borg (cable-195-162-216-83.upc.chello.be [195.162.216.83]) by aeon.tvd.be (8.9.3/8.9.3/RELAY-1.1) with ESMTP id TAA02630; Tue, 20 Jun 2000 19:29:14 +0200 (MET DST) Received: from localhost (geert@localhost) by callisto.of.borg (8.9.3/8.9.3/Debian 8.9.3-21) with ESMTP id TAA20101; Tue, 20 Jun 2000 19:29:14 +0200 X-Authentication-Warning: callisto.of.borg: geert owned process doing -bs Date: Tue, 20 Jun 2000 19:29:14 +0200 (CEST) From: Geert Uytterhoeven To: frowand@mvista.com cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support In-Reply-To: <394FA5D1.DDAEA1F6@mvista.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 20 Jun 2000, Frank Rowand wrote: > Geert Uytterhoeven wrote: > > The following patch fixes 2 problems related to ISA bus access on non-PC > > platforms: [...] > Would it make sense to apply the same sort of fix to the following code in > __ioremap(), so that ISA space is handled consistently?: > > /* > * If the address lies within the first 16 MB, assume it's in ISA > * memory space > */ > if (p < 16*1024*1024) > p += _ISA_MEM_BASE; Yes. I added that correction because the NVRAM driver wants to ioremap() the NVRAM region as reported by the OF device tree, while on CHRP boxes with PC style NVRAM, it's in ISA memory space at 0xe0000 (`nvram@me0000', according to OF). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Tue Jun 20 11:43:18 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 11:43:09 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:4 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 11:42:44 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id LAA04571 for ; Tue, 20 Jun 2000 11:47:47 -0700 (PDT) mail_from (jsun@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id LAA21859 for ; Tue, 20 Jun 2000 11:42:08 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id LAA00481 for ; Tue, 20 Jun 2000 11:42:07 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id LAA32681; Tue, 20 Jun 2000 11:41:11 -0700 Message-ID: <394FBAC6.3D29C4A7@mvista.com> Date: Tue, 20 Jun 2000 11:41:10 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: Dominic Sweetman CC: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com, nigel@algor.co.uk Subject: Re: R5000 support (specifically two-way set-associative cache...) References: <394EA5A0.B882F66A@mvista.com> <200006200947.KAA08574@mudchute.algor.co.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Dominic Sweetman wrote: > > Jun Sun (jsun@mvista.com) writes: > > > 2. Specifically, NEC Vr5000 has two-way set-associative cache. I > > browsed through the cache code, and got concerned that I don't see any > > code that seems to take care of that. Do I miss something? > > The two-way cache on the R5000 (and its R4600 parent) is implemented > so that the cache operations used during running don't have to know > about the cache organisation. Even initialisation of an R5000 cache > can be done by a piece of code which has no reference to two-wayness > and just works over R4x00/R5000 CPUs. > > So this is not *necessarily* a problem. > I am not sure here. Vr5000 uses vAddr:0 (bit 0) to select the way in a set. I just cannot imagine how you can invalidate both ways without referring to some vAddrs that end with 1. I understand some CPUs (perhaps R4600 is so?) uses the most-significant bit within the cache line to select the way. In that case, one can just treat the line size as half as what the actual line size is, and the cache can be treated as if they are directed mapped. But I believe this can not be the case with Vr5000. Can someone familiar with R4600 tell us more about how R4600 cache is setup to hide two-wayness? Thanks. Jun From owner-linux-mips@oss.sgi.com Tue Jun 20 12:04:29 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 12:04:18 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:5639 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 12:04:00 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id MAA09644 for ; Tue, 20 Jun 2000 12:09:05 -0700 (PDT) mail_from (jsun@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA29392 for ; Tue, 20 Jun 2000 12:03:24 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id MAA03689 for ; Tue, 20 Jun 2000 12:03:19 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id MAA00676; Tue, 20 Jun 2000 12:01:37 -0700 Message-ID: <394FBF91.76AE6FD0@mvista.com> Date: Tue, 20 Jun 2000 12:01:37 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: Dominic Sweetman , linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com, nigel@algor.co.uk Subject: Re: R5000 support (specifically two-way set-associative cache...) References: <394EA5A0.B882F66A@mvista.com> <200006200947.KAA08574@mudchute.algor.co.uk> <394FBAC6.3D29C4A7@mvista.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Oops! My bad! I meant to talk about Vr5000 but I was looking at the Vr5432 manual! So here is the clarification : 1. both CPUs have two-way set-associative caches 2. Vr5432 uses vAddr:0 to select the way 3. I am not 100% sure about Vr5000. I think it actually uses vAddr:4, the MSB of cache line size. If this is true, the reducing-line-size-by-half trick would work for Vr5000. Sorry for the confusion. Jun Jun Sun wrote: > > Dominic Sweetman wrote: > > > > Jun Sun (jsun@mvista.com) writes: > > > > > 2. Specifically, NEC Vr5000 has two-way set-associative cache. I > > > browsed through the cache code, and got concerned that I don't see any > > > code that seems to take care of that. Do I miss something? > > > > The two-way cache on the R5000 (and its R4600 parent) is implemented > > so that the cache operations used during running don't have to know > > about the cache organisation. Even initialisation of an R5000 cache > > can be done by a piece of code which has no reference to two-wayness > > and just works over R4x00/R5000 CPUs. > > > > So this is not *necessarily* a problem. > > > > I am not sure here. > > Vr5000 uses vAddr:0 (bit 0) to select the way in a set. I just cannot > imagine how you can invalidate both ways without referring to some > vAddrs that end with 1. > > I understand some CPUs (perhaps R4600 is so?) uses the most-significant > bit within the cache line to select the way. In that case, one can just > treat the line size as half as what the actual line size is, and the > cache can be treated as if they are directed mapped. But I believe this > can not be the case with Vr5000. > > Can someone familiar with R4600 tell us more about how R4600 cache is > setup to hide two-wayness? Thanks. > > Jun From owner-linux-mips@oss.sgi.com Tue Jun 20 13:15:19 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 13:15:10 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:30740 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 13:14:53 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id NAA01454 for ; Tue, 20 Jun 2000 13:20:02 -0700 (PDT) mail_from (rmk@arm.linux.org.uk) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id NAA85692 for ; Tue, 20 Jun 2000 13:14:21 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id NAA49633 for ; Tue, 20 Jun 2000 13:12:25 -0700 (PDT) mail_from (rmk@arm.linux.org.uk) Received: from caramon.arm.linux.org.uk (p10-robin-gui.tch.enablis.net [194.168.180.70]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id NAA04651 for ; Tue, 20 Jun 2000 13:12:12 -0700 (PDT) mail_from (rmk@arm.linux.org.uk) Received: from flint.arm.linux.org.uk (root@flint [192.168.0.4]) by caramon.arm.linux.org.uk (8.9.3/8.9.3) with ESMTP id VAA23228; Tue, 20 Jun 2000 21:11:39 +0100 Received: (from rmk@localhost) by flint.arm.linux.org.uk (8.9.3/8.9.3) id VAA22426; Tue, 20 Jun 2000 21:10:06 +0100 From: Russell King Message-Id: <200006202010.VAA22426@flint.arm.linux.org.uk> Subject: Re: Proposal: non-PC ISA bus support To: Geert.Uytterhoeven@sonycom.com (Geert Uytterhoeven) Date: Tue, 20 Jun 2000 21:10:06 +0100 (BST) Cc: linux-kernel@vger.rutgers.edu (Linux kernel), linuxppc-dev@lists.linuxppc.org (Linux/PPC Development), linux@cthulhu.engr.sgi.com (Linux/MIPS Development) In-Reply-To: from "Geert Uytterhoeven" at Jun 20, 2000 01:21:10 PM X-Location: london.england.earth.mulky-way.universe X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Geert Uytterhoeven writes: > 1. ISA I/O space is memory mapped on many platforms (e.g. PPC and MIPS). To > access it from user space, you cannot plainly use inb() and friends like on > PC, but you have to mmap() the correct region of /dev/mem first. This > region depends on the machine type and currently there's no simple way to > find out from user space. We've already solved this on ARM. Check out arch/arm/kernel/isa.c _____ |_____| ------------------------------------------------- ---+---+- | | Russell King rmk@arm.linux.org.uk --- --- | | | | http://www.arm.linux.org.uk/~rmk/aboutme.html / / | | +-+-+ --- -+- / | THE developer of ARM Linux |+| /|\ / | | | --- | +-+-+ ------------------------------------------------- /\\\ | From owner-linux-mips@oss.sgi.com Tue Jun 20 14:01:09 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 14:00:59 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:35878 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 14:00:41 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id NAA14954 for ; Tue, 20 Jun 2000 13:55:44 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id NAA64154 for ; Tue, 20 Jun 2000 13:59:59 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from kenton.algor.co.uk (kenton.algor.co.uk [193.117.190.25]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id NAA08867 for ; Tue, 20 Jun 2000 13:59:56 -0700 (PDT) mail_from (dom@mudchute.algor.co.uk) Received: from mudchute.algor.co.uk (dom@mudchute.algor.co.uk [193.117.190.19]) by kenton.algor.co.uk (8.8.8/8.8.8) with ESMTP id WAA03512; Tue, 20 Jun 2000 22:00:00 +0100 (GMT/BST) Received: (from dom@localhost) by mudchute.algor.co.uk (8.8.5/8.8.5) id VAA19304; Tue, 20 Jun 2000 21:59:32 +0100 (BST) Date: Tue, 20 Jun 2000 21:59:32 +0100 (BST) Message-Id: <200006202059.VAA19304@mudchute.algor.co.uk> From: Dominic Sweetman MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit To: Jun Sun Cc: Dominic Sweetman , linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com, nigel@algor.co.uk Subject: Re: R5000 support (specifically two-way set-associative cache...) In-Reply-To: <394FBF91.76AE6FD0@mvista.com> References: <394EA5A0.B882F66A@mvista.com> <200006200947.KAA08574@mudchute.algor.co.uk> <394FBAC6.3D29C4A7@mvista.com> <394FBF91.76AE6FD0@mvista.com> X-Mailer: VM 6.34 under 19.16 "Lille" XEmacs Lucid Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Jun Sun (jsun@mvista.com) writes: > I meant to talk about Vr5000 but I was looking at the Vr5432 manual! > 1. both CPUs have two-way set-associative caches > 2. Vr5432 uses vAddr:0 to select the way The Vr5432 is indeed different, compelling you to be aware of the number of sets. > 3. I am not 100% sure about Vr5000. It uses a high-order bit, just like R4600. > > Can someone familiar with R4600 tell us more about how R4600 cache > > is setup to hide two-wayness? Thanks. Fundamentally: o "index" operations just go first through one set, then the other. So long as initialisation routines are applied to each possible index in turn, both sets get initialised. o "hit" operations "just work". So long as initialisation is done carefully (basic rule: perform one stage to the whole cache before going on to the next), run-time cache maintenance can and should be done with "hit" instructions, and you don't need to worry whether the CPU is direct mapped, 2- or 4-way set associative. (it's all explained in my book, "See MIPS Run", of course...) Even with the Vr5432 you only have to know the difference when first setting up the CPU. Dominic Sweetman Algorithmics Ltd dom@algor.co.uk From owner-linux-mips@oss.sgi.com Tue Jun 20 17:48:52 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 17:48:32 -0700 Received: from u-161.frankfurt3.ipdial.viaginterkom.de ([62.180.18.161]:45573 "EHLO u-161.frankfurt3.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 17:48:28 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Wed, 21 Jun 2000 02:48:21 +0200 Date: Wed, 21 Jun 2000 02:48:21 +0200 From: Ralf Baechle To: Keith M Wesolowski Cc: Florian Lohoff , Philippe Chauvat , Linux Mips Subject: Re: [ Message-ID: <20000621024820.A10167@bacchus.dhis.org> References: <394E5321.CB49B0B7@exfo.com> <20000619113258.C691@paradigm.rfc822.org> <20000619114536.A22137@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000619114536.A22137@chem.unr.edu>; from wesolows@chem.unr.edu on Mon, Jun 19, 2000 at 11:45:36AM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Mon, Jun 19, 2000 at 11:45:36AM -0700, Keith M Wesolowski wrote: > > You mean SGI Challenge ? > > > > > Does anybody could explain to me, what could appear ? > > > > If so - This machine is AFAIk completely unsupported ... > > It could be a Challenge S, which should probably work. What > kernel/machine exactly is this? It must be a Challenge S. I don't believe that on another Challenge the kernel would even be able to print a panic message ... I guess he was trying the Hardhat kernel which was panicing on certain configurations. Ralf From owner-linux-mips@oss.sgi.com Tue Jun 20 20:11:43 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 20:11:24 -0700 Received: from [216.186.163.131] ([216.186.163.131]:49466 "HELO rohan.bescape.com") by oss.sgi.com with SMTP id ; Tue, 20 Jun 2000 20:11:11 -0700 Received: from GANDALF ([216.186.163.142]) by rohan.bescape.com (950413.SGI.8.6.12/950213.SGI.AUTOCF) via SMTP id UAA07115 for ; Tue, 20 Jun 2000 20:11:11 -0700 From: "Mark Martin" To: Subject: RE: linux/mips on cd? Date: Tue, 20 Jun 2000 22:11:19 -0500 Message-ID: <004901bfdb2e$5f3a7b70$8ea3bad8@bescape.com> MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0) In-Reply-To: Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I might be interested in building a CD for folks if there's interest...cd-r's, of course... Mark -----Original Message----- From: owner-linux-mips@oss.sgi.com [mailto:owner-linux-mips@oss.sgi.com]On Behalf Of Paul Jakma Sent: Monday, June 19, 2000 1:19 AM To: Linux MIPS Subject: linux/mips on cd? does anyone sell a CD of linux-mips? I'd like to try linux-mips in production use as my dialup firewall. (security thru obscurity: let's see those script kiddies find 'sploits' for linux/mips!). However, i don't have the bandwidth to download the distribution. if anyone is selling CD's, or if anyone would be kind enough to burn a CD for me, I'd be very grateful if they'd contact me off-list. thanks, -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: It got to the point where I had to get a haircut or both feet firmly planted in the air. From owner-linux-mips@oss.sgi.com Tue Jun 20 20:31:02 2000 Received: by oss.sgi.com id ; Tue, 20 Jun 2000 20:30:42 -0700 Received: from mta5.snfc21.pbi.net ([206.13.28.241]:12681 "EHLO mta5.snfc21.pbi.net") by oss.sgi.com with ESMTP id ; Tue, 20 Jun 2000 20:30:08 -0700 Received: from pacbell.net ([63.194.214.47]) by mta5.snfc21.pbi.net (Sun Internet Mail Server sims.3.5.2000.01.05.12.18.p9) with ESMTP id <0FWH00FY7J0RY2@mta5.snfc21.pbi.net> for linux-mips@oss.sgi.com; Tue, 20 Jun 2000 20:29:16 -0700 (PDT) Date: Tue, 20 Jun 2000 20:29:28 -0700 From: Pete Popov Subject: mips linux smp and hardware question To: "linux-mips@fnet.fr" , "linux-mips@oss.sgi.com" Message-id: <39503698.C73DB1E7@pacbell.net> MIME-version: 1.0 X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.12-20 i686) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit X-Accept-Language: bg, en Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Does anyone know the status of the mips linux smp code? Also, I'm looking for a mips multi-cpu system for smp testing and development. Since the final code will go on r4k and vr5000 embedded boards, I would like to find a "desktop" systems with up to four such CPUs. Any suggestions or pointers would be really appreciated. Thanks, Pete From owner-linux-mips@oss.sgi.com Wed Jun 21 02:24:24 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 02:24:13 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:35411 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 02:23:55 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id CAA08701 for ; Wed, 21 Jun 2000 02:29:05 -0700 (PDT) mail_from (spock@mgnet.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA38258 for ; Wed, 21 Jun 2000 02:23:19 -0700 (PDT) mail_from (spock@mgnet.de) Received: from obelix.hrz.tu-chemnitz.de (obelix.hrz.tu-chemnitz.de [134.109.132.55]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA01868 for ; Wed, 21 Jun 2000 02:23:18 -0700 (PDT) mail_from (spock@mgnet.de) Received: from sunnyboy.informatik.tu-chemnitz.de by obelix.hrz.tu-chemnitz.de with Local SMTP (PP); Wed, 21 Jun 2000 11:22:36 +0200 Received: from scotty.mgnet.de (sulu.csn.tu-chemnitz.de [134.109.96.105]) by sunnyboy.informatik.tu-chemnitz.de (8.8.8/8.8.8) with SMTP id LAA24789 for ; Wed, 21 Jun 2000 11:22:30 +0200 (MET DST) Received: (qmail 31603 invoked from network); 21 Jun 2000 09:22:29 -0000 Received: from spock.mgnet.de (HELO scotty.mgnet.de) (192.168.1.4) by scotty.mgnet.de with SMTP; 21 Jun 2000 09:22:29 -0000 Date: Wed, 21 Jun 2000 11:23:43 +0200 From: Klaus Naumann To: Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Subject: Problems with multiple harddisks on my Indigo2 Message-ID: <20000621112343.A19912@spock> Reply-To: spock@mgnet.de Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit X-Mailer: Balsa 0.8.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi all While trying to build a 2nd harddisk into my Indigo2 I experienced the following problems. The bus is terminated correctly and with 2 m external cable to my scsi case it also shouldn't be to long. When I try to copy data from a harddisk to the other I get weired I/O erros after some time of heavy I/O. On the console I get something like: cp: /mnt/redhat/kernel23/linux/arch/sparc/lib/COPYING.LIB: Input/output error And dmesg shows: attempt to access beyond end of device 08:03: rw=0, want=959546428, limit=1888830 attempt to access beyond end of device 08:03: rw=0, want=958585434, limit=1888830 attempt to access beyond end of device 08:03: rw=0, want=959546428, limit=1888830 attempt to access beyond end of device 08:03: rw=0, want=958585434, limit=1888830 attempt to access beyond end of device 08:03: rw=0, want=941858675, limit=1888830 Ususally the system is pretty unstable after these messages. Also I'm getting a message sc1,2,0: cmd=0x12 timeout after 2 sec. Resetting SCSI bus every time I restart my Indigo2 on the serial console - does anyone know what that means and if it's a problem ? Further more it happens that after heavy I/O a simple "sync" needs more than one minute. Has anyone seen the same or equal problems in any way and/ was able to resolve these ? TIA, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Wed Jun 21 05:48:04 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 05:47:54 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:27994 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 05:47:25 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id FAA02078 for ; Wed, 21 Jun 2000 05:52:35 -0700 (PDT) mail_from (mailinglist@ichilton.co.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id FAA76098 for ; Wed, 21 Jun 2000 05:46:45 -0700 (PDT) mail_from (mailinglist@ichilton.co.uk) Received: from mta03-svc.ntlworld.com (mta03-svc.ntlworld.com [62.253.162.43]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id FAA03816 for ; Wed, 21 Jun 2000 05:46:34 -0700 (PDT) mail_from (mailinglist@ichilton.co.uk) Received: from icserver.ichilton.co.uk ([62.252.236.251]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000621124642.WDTS290.mta03-svc.ntlworld.com@icserver.ichilton.co.uk>; Wed, 21 Jun 2000 13:46:42 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5LCh7v30630; Wed, 21 Jun 2000 13:43:17 +0100 From: "Ian Chilton" To: , "Linux Debian MIPS" , "Linux MIPS cthulhu" , "Linux MIPS" , "MIPS vger" Subject: RE: Problems with multiple harddisks on my Indigo2 Date: Wed, 21 Jun 2000 13:43:07 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <20000621112343.A19912@spock> Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > cp: /mnt/redhat/kernel23/linux/arch/sparc/lib/COPYING.LIB: > Input/output error > And dmesg shows: > attempt to access beyond end of device > 08:03: rw=0, want=959546428, limit=1888830 [SNIP] I have an SGI Indy, with 2 internal hard disks, a 4GB and a 1GB I get the same thing! > Also I'm getting a message > sc1,2,0: cmd=0x12 timeout after 2 sec. Resetting SCSI bus I started getting this when I added the 2nd HD (1GB). Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | | IRC Nick: GadgetMan | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Wed Jun 21 14:41:29 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 14:41:19 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:3870 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 14:41:01 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id OAA03379 for ; Wed, 21 Jun 2000 14:46:09 -0700 (PDT) mail_from (paul@clubi.ie) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id OAA48744 for ; Wed, 21 Jun 2000 14:40:27 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA22725 for ; Wed, 21 Jun 2000 14:38:25 -0700 (PDT) mail_from (paul@clubi.ie) Received: from hibernia.jakma.org (hibernia.clubi.ie [212.17.32.129]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id OAA07499 for ; Wed, 21 Jun 2000 14:38:18 -0700 (PDT) mail_from (paul@clubi.ie) Received: from fogarty.jakma.org (IDENT:root@fogarty.jakma.org [192.168.0.4]) by hibernia.jakma.org (8.10.0/8.10.0) with ESMTP id e5LLchf18658; Wed, 21 Jun 2000 22:38:43 +0100 Received: from localhost (paul@localhost) by fogarty.jakma.org (8.10.0/8.10.0) with ESMTP id e5LLcgE05213; Wed, 21 Jun 2000 22:38:42 +0100 X-Authentication-Warning: fogarty.jakma.org: paul owned process doing -bs Date: Wed, 21 Jun 2000 22:38:42 +0100 (IST) From: Paul Jakma X-Sender: paul@fogarty.jakma.org To: Ian Chilton cc: spock@mgnet.de, Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Subject: RE: Problems with multiple harddisks on my Indigo2 In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 21 Jun 2000, Ian Chilton wrote: > I have an SGI Indy, with 2 internal hard disks, a 4GB and a 1GB > > I get the same thing! > > > > Also I'm getting a message > > sc1,2,0: cmd=0x12 timeout after 2 sec. Resetting SCSI bus > > I started getting this when I added the 2nd HD (1GB). > fwiw, i got this too on my indy when i added a Quantum Empire 1GB. >From cold boot the PROM doesn't recognise the second disk, but IRIX does (PROM gives me the exact same error message as the one you wrote above - but prints it twice). If i halt back to PROM then the PROM does see the second disk. (and only prints that error message once) my theories are: 1. PROM controller driver is minimal and doesn't init the controller/disks properly whereas the IRIX driver does. 2. disk spin up times.. ?? 3. Perhaps cause the outboard SCSI port is not terminated. (least not on my indy) > -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: Give me a fish and I will eat today. Teach me to fish and I will eat forever. From owner-linux-mips@oss.sgi.com Wed Jun 21 16:15:49 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 16:15:40 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:56613 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 16:15:17 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id QAA07155 for ; Wed, 21 Jun 2000 16:20:24 -0700 (PDT) mail_from (kenh@knoxville.sgi.com) Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA53780 for ; Wed, 21 Jun 2000 16:14:44 -0700 (PDT) mail_from (kenh@knoxville.sgi.com) Received: from sgitys.knoxville.sgi.com (sgitys.knoxville.sgi.com [169.238.150.98]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id QAA58802; Wed, 21 Jun 2000 16:14:25 -0700 (PDT) Received: from enigma.knoxville.sgi.com (enigma.knoxville.sgi.com [169.238.150.118]) by sgitys.knoxville.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id TAA27437; Wed, 21 Jun 2000 19:09:40 -0400 (EDT) Received: (from kenh@localhost) by enigma.knoxville.sgi.com; Wed, 21 Jun 2000 19:11:39 -0400 (EDT) Date: Wed, 21 Jun 2000 19:11:39 -0400 (EDT) From: "J.K. Hill" Message-Id: <10006211911.ZM32099@enigma.knoxville.sgi.com> In-Reply-To: Paul Jakma "RE: Problems with multiple harddisks on my Indigo2" (Jun 21, 10:38pm) References: X-Mailer: Z-Mail-SGI (3.2S.3 08feb96 MediaMail) To: Paul Jakma , Ian Chilton Subject: Re: Problems with multiple harddisks on my Indigo2 Cc: spock@mgnet.de, Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing All, Try looking up the jumper'ing information for the drive... There is probably a delay for spinning the drive up at boot (or some such nonsense). Regards, Ken On Jun 21, 10:38pm, Paul Jakma wrote: > Subject: RE: Problems with multiple harddisks on my Indigo2 > On Wed, 21 Jun 2000, Ian Chilton wrote: > > > I have an SGI Indy, with 2 internal hard disks, a 4GB and a 1GB > > > > I get the same thing! > > > > > > > Also I'm getting a message > > > sc1,2,0: cmd=0x12 timeout after 2 sec. Resetting SCSI bus > > > > I started getting this when I added the 2nd HD (1GB). > > > > fwiw, i got this too on my indy when i added a Quantum Empire 1GB. > > >From cold boot the PROM doesn't recognise the second disk, but IRIX > does (PROM gives me the exact same error message as the one you wrote > above - but prints it twice). If i halt back to PROM then the PROM > does see the second disk. (and only prints that error message once) > > my theories are: > > 1. PROM controller driver is minimal and doesn't init the > controller/disks properly whereas the IRIX driver does. > > 2. disk spin up times.. ?? > > 3. Perhaps cause the outboard SCSI port is not terminated. (least not > on my indy) > > > > -- > Paul Jakma paul@clubi.ie > PGP5 key: http://www.clubi.ie/jakma/publickey.txt > ------------------------------------------- > Fortune: > Give me a fish and I will eat today. > > Teach me to fish and I will eat forever. >-- End of excerpt from Paul Jakma From owner-linux-mips@oss.sgi.com Wed Jun 21 16:25:49 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 16:25:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:7018 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 16:25:06 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id QAA05729 for ; Wed, 21 Jun 2000 16:20:02 -0700 (PDT) mail_from (paul@clubi.ie) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA54499 for ; Wed, 21 Jun 2000 16:24:30 -0700 (PDT) mail_from (paul@clubi.ie) Received: from hibernia.jakma.org (hibernia.clubi.ie [212.17.32.129]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA03674 for ; Wed, 21 Jun 2000 16:24:13 -0700 (PDT) mail_from (paul@clubi.ie) Received: from fogarty.jakma.org (IDENT:root@fogarty.jakma.org [192.168.0.4]) by hibernia.jakma.org (8.10.0/8.10.0) with ESMTP id e5LNOhf21775; Thu, 22 Jun 2000 00:24:43 +0100 Received: from localhost (paul@localhost) by fogarty.jakma.org (8.10.0/8.10.0) with ESMTP id e5LNOhp05573; Thu, 22 Jun 2000 00:24:43 +0100 X-Authentication-Warning: fogarty.jakma.org: paul owned process doing -bs Date: Thu, 22 Jun 2000 00:24:43 +0100 (IST) From: Paul Jakma X-Sender: paul@fogarty.jakma.org To: "J.K. Hill" cc: Ian Chilton , spock@mgnet.de, Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Subject: Re: Problems with multiple harddisks on my Indigo2 In-Reply-To: <10006211911.ZM32099@enigma.knoxville.sgi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 21 Jun 2000, J.K. Hill wrote: > All, > > Try looking up the jumper'ing information for the drive... There > is probably a delay for spinning the drive up at boot (or some > such nonsense). > checked that.. and it's not it. the jumper isn't set. (i think). however, this drive used to be in an Alpha, and ARCSBIOS on Alpha had a problem with not recognising it from cold too, sometimes. so maybe the drive just doesn't spin up fast enough. > Regards, > > Ken thanks, -- Paul Jakma paul@clubi.ie PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: The price one pays for pursuing any profession, or calling, is an intimate knowledge of its ugly side. -- James Baldwin From owner-linux-mips@oss.sgi.com Wed Jun 21 17:02:19 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 17:01:59 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:53882 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 17:01:52 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id QAA09970 for ; Wed, 21 Jun 2000 16:56:55 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id RAA87045 for ; Wed, 21 Jun 2000 17:00:04 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id QAA65987 for ; Wed, 21 Jun 2000 16:58:17 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: from piglet.twiddle.net (piglet.twiddle.net [207.104.6.26]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id QAA08842 for ; Wed, 21 Jun 2000 16:58:16 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: (from rth@localhost) by piglet.twiddle.net (8.9.3/8.9.3) id QAA28945; Wed, 21 Jun 2000 16:57:44 -0700 Date: Wed, 21 Jun 2000 16:57:44 -0700 From: Richard Henderson To: Geert Uytterhoeven Cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support Message-ID: <20000621165744.C28857@twiddle.net> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3us In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 20, 2000 at 01:21:10PM +0200, Geert Uytterhoeven wrote: >1. ISA I/O space is memory mapped on many platforms (e.g. PPC and MIPS). To > access it from user space, you cannot plainly use inb() and friends like on > PC, but you have to mmap() the correct region of /dev/mem first. This > region depends on the machine type and currently there's no simple way to > find out from user space. You may wish to examine the pciconfig_iobase syscall used on Alpha. It can be used to solve the multiple independant pci bus problem as well as the ISA base address problem. >2. ISA memory is not located at physical address 0 on many platforms (e.g. PPC > and some MIPS boxes). This means you cannot e.g. use > request_mem_region(0xa0000, 65536) to request the legacy VGA region. This can be fiddled. Basicly, you pretend that 0 is the base address, then use ioremap to shift everything up into place. This assumes that the ISA bus is contained within exactly one PCI hose. r~ From owner-linux-mips@oss.sgi.com Wed Jun 21 22:43:21 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 22:43:11 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:65148 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 22:42:54 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id WAA07945 for ; Wed, 21 Jun 2000 22:37:54 -0700 (PDT) mail_from (mlan@cpu.lu) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id WAA41828 for ; Wed, 21 Jun 2000 22:42:21 -0700 (PDT) mail_from (mlan@cpu.lu) Received: from mcp.cpu.lu (mcp.cpu.lu [193.168.2.34]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id WAA02303 for ; Wed, 21 Jun 2000 22:42:19 -0700 (PDT) mail_from (mlan@cpu.lu) Received: from piglet.grunz.lu (mfp [193.168.2.96]) by mcp.cpu.lu (8.8.6 (PHNE_14041)/8.8.6) with ESMTP id HAA17559; Thu, 22 Jun 2000 07:42:26 +0200 (METDST) Received: from cpu.lu (localhost [127.0.0.1]) by piglet.grunz.lu (8.9.3/8.9.3) with ESMTP id XAA01021; Wed, 21 Jun 2000 23:47:04 +0200 Message-Id: <200006212147.XAA01021@piglet.grunz.lu> Date: Wed, 21 Jun 2000 23:47:01 +0200 (CEST) From: Michel Lanners Reply-To: mlan@cpu.lu Subject: Re: Proposal: non-PC ISA bus support To: bh40@calva.net cc: Geert.Uytterhoeven@sonycom.com, linuxppc-dev@lists.linuxppc.org, linux@cthulhu.engr.sgi.com In-Reply-To: <20000620122329.13473@mailhost.mipsys.com> MIME-Version: 1.0 Content-Type: TEXT/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8BIT Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi all, On 20 Jun, this message from Benjamin Herrenschmidt echoed through cyberspace: > We still can decide (and that's what I currently do in the kernel) that > IO space is only supported on one of those 3 busses (the one on which the > external PCI is). This prevents however use of IOs on the AGP slot, ... and multiple host bridges, like on the 9x00 (bad, two separate buses ŕ 3 slots) and 7x00/8x00 (no problem, second (fixed, video subsys) bus doesn't have IO devices). struct pci_dev has void *sysdata. Can we use that for something reasonable here? Like additional info (iobase per device, set by fixup code)? Michel ------------------------------------------------------------------------- Michel Lanners | " Read Philosophy. Study Art. 23, Rue Paul Henkes | Ask Questions. Make Mistakes. L-1710 Luxembourg | email mlan@cpu.lu | http://www.cpu.lu/~mlan | Learn Always. " From owner-linux-mips@oss.sgi.com Wed Jun 21 23:54:11 2000 Received: by oss.sgi.com id ; Wed, 21 Jun 2000 23:53:52 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:43288 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 21 Jun 2000 23:53:34 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id XAA12420 for ; Wed, 21 Jun 2000 23:48:37 -0700 (PDT) mail_from (roald@stavanger.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id XAA31939 for ; Wed, 21 Jun 2000 23:53:03 -0700 (PDT) Received: from sgstv.stavanger.sgi.com (sgstv.stavanger.sgi.com [144.253.219.2]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id XAA53946 for ; Wed, 21 Jun 2000 23:51:15 -0700 (PDT) mail_from (roald@stavanger.sgi.com) Received: by sgstv.stavanger.sgi.com (980427.SGI.8.8.8/940406.SGI) id IAA32492; Thu, 22 Jun 2000 08:51:16 +0200 (MEST) From: "Roald Lygre" Message-Id: <10006220851.ZM533158@sgstv.stavanger.sgi.com> Date: Thu, 22 Jun 2000 08:51:15 +0200 In-Reply-To: Paul Jakma "RE: Problems with multiple harddisks on my Indigo2" (Jun 21, 10:38pm) References: Reply_To: roald@stavanger.sgi.com X-Mailer: Z-Mail (3.2.3 08feb96 MediaMail) To: Paul Jakma , Ian Chilton Subject: Re: Problems with multiple harddisks on my Indigo2 Cc: spock@mgnet.de, Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Jun 21, 10:38pm, Paul Jakma wrote: > Subject: RE: Problems with multiple harddisks on my Indigo2 > On Wed, 21 Jun 2000, Ian Chilton wrote: > > > 3. Perhaps cause the outboard SCSI port is not terminated. (least not > on my indy) > The SCSI port should be terminated with an active terminator on the Indy, regardless of if you have 1 or 2 drives installed. -Roald -- --------------------------------------------------------------- | Company: SGI Norge A/S | | Email: roald@sgi.com Tlf: +47 5163 4183 | | Addr: Luramyrveien 79 Mobil: +47 909 33 903| | N-4313 Sandnes VMail (SGI): 870-4679 | | NORWAY VMail(ext): +47 6711 4679 | --------------------------------------------------------------- Essential SGI Websites: http://www.sgi.com/ SGI http://www.sgi.no/ SGI Norge http://support-europe.sgi.com/ Log calls, patches+overlays, ++ http://freeware.sgi.com/ Freeware - "ready-to-eat" http://oss.sgi.com/mips/ Linux for SGI (Mips/Intel) http://www.sgi.com/developers/ Developer Central http://www.sgi.com/Products/Evaluation/ Evaluation Software From owner-linux-mips@oss.sgi.com Thu Jun 22 00:22:11 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 00:22:02 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:1315 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 00:21:46 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id AAA14576 for ; Thu, 22 Jun 2000 00:16:49 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id AAA23418 for ; Thu, 22 Jun 2000 00:21:15 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA61388 for ; Thu, 22 Jun 2000 00:19:09 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: from piglet.twiddle.net (piglet.twiddle.net [207.104.6.26]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA01307 for ; Thu, 22 Jun 2000 00:19:08 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: (from rth@localhost) by piglet.twiddle.net (8.9.3/8.9.3) id AAA29561; Thu, 22 Jun 2000 00:19:16 -0700 Date: Thu, 22 Jun 2000 00:19:16 -0700 From: Richard Henderson To: Geert Uytterhoeven Cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support Message-ID: <20000622001916.A29550@twiddle.net> References: <20000621165744.C28857@twiddle.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3us In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 22, 2000 at 08:45:47AM +0200, Geert Uytterhoeven wrote: > But with ioremap() you cannot specify where it has to be mapped, right? So > you're still stuck with an offset. Huh? Who cares where it's mapped. "Some unused space." A pointer is a pointer. In my case there is a direct correlation between the "base address" and the "ioremaped address" -- the addition of a constant. That's the win for using 64-bit pointers. ;-) > > the ISA bus is contained within exactly one PCI hose. > > Which is not the case on some boxes :-( The only machines I knew about that had this were the DEC NUMA machines. What does your bus configuration look like? r~ From owner-linux-mips@oss.sgi.com Thu Jun 22 00:39:12 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 00:39:02 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:43835 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 00:38:40 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id AAA08031 for ; Thu, 22 Jun 2000 00:43:46 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA08919 for ; Thu, 22 Jun 2000 00:38:05 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA00452 for ; Thu, 22 Jun 2000 00:38:01 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id IAA22816; Thu, 22 Jun 2000 08:45:47 +0200 (MET DST) Date: Thu, 22 Jun 2000 08:45:47 +0200 (MET DST) From: Geert Uytterhoeven To: Richard Henderson cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support In-Reply-To: <20000621165744.C28857@twiddle.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Wed, 21 Jun 2000, Richard Henderson wrote: > On Tue, Jun 20, 2000 at 01:21:10PM +0200, Geert Uytterhoeven wrote: > >1. ISA I/O space is memory mapped on many platforms (e.g. PPC and MIPS). To > > access it from user space, you cannot plainly use inb() and friends like on > > PC, but you have to mmap() the correct region of /dev/mem first. This > > region depends on the machine type and currently there's no simple way to > > find out from user space. > > You may wish to examine the pciconfig_iobase syscall used on Alpha. > It can be used to solve the multiple independant pci bus problem > as well as the ISA base address problem. Thanks! I'll take a look at it... > >2. ISA memory is not located at physical address 0 on many platforms (e.g. PPC > > and some MIPS boxes). This means you cannot e.g. use > > request_mem_region(0xa0000, 65536) to request the legacy VGA region. > > This can be fiddled. Basicly, you pretend that 0 is the base address, > then use ioremap to shift everything up into place. This assumes that But with ioremap() you cannot specify where it has to be mapped, right? So you're still stuck with an offset. Besides, request_mem_region(0xa0000, 65536) will fail on my box anyway because I already have some memory resources requested at address 0. > the ISA bus is contained within exactly one PCI hose. Which is not the case on some boxes :-( Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Thu Jun 22 00:43:31 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 00:43:11 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:55867 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 00:43:06 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id AAA00101 for ; Thu, 22 Jun 2000 00:48:17 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA72640 for ; Thu, 22 Jun 2000 00:42:36 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA09636 for ; Thu, 22 Jun 2000 00:42:32 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id JAA24403; Thu, 22 Jun 2000 09:41:58 +0200 (MET DST) Date: Thu, 22 Jun 2000 09:41:58 +0200 (MET DST) From: Geert Uytterhoeven To: Richard Henderson cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support In-Reply-To: <20000622001916.A29550@twiddle.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 22 Jun 2000, Richard Henderson wrote: > On Thu, Jun 22, 2000 at 08:45:47AM +0200, Geert Uytterhoeven wrote: > > But with ioremap() you cannot specify where it has to be mapped, right? So > > you're still stuck with an offset. > > Huh? Who cares where it's mapped. "Some unused space." > A pointer is a pointer. > > In my case there is a direct correlation between the "base address" > and the "ioremaped address" -- the addition of a constant. That's > the win for using 64-bit pointers. ;-) I think we're talking about something different. I don't care about the pointer nor the ioremap() neither (we explicitly map it in MMU_init()). The problem is that drivers assume ISA memory space is at 0 and use e.g. request_mem_region(0xa0000, 65536) to request the legacy VGA region, while it should be request_mem_region(isa_mem_base+0xa0000, 65536) for compatibility with anything besides ia32. > > > the ISA bus is contained within exactly one PCI hose. > > > > Which is not the case on some boxes :-( > > The only machines I knew about that had this were the DEC NUMA > machines. What does your bus configuration look like? There are multiple legacy ISA regions on some PowerMacs, which have multiple PCI buses and such. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Thu Jun 22 02:00:02 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 01:59:53 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:26687 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 01:59:39 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id CAA09587 for ; Thu, 22 Jun 2000 02:04:45 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id BAA54218 for ; Thu, 22 Jun 2000 01:59:03 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: from piglet.twiddle.net (piglet.twiddle.net [207.104.6.26]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id BAA05369 for ; Thu, 22 Jun 2000 01:59:01 -0700 (PDT) mail_from (rth@piglet.twiddle.net) Received: (from rth@localhost) by piglet.twiddle.net (8.9.3/8.9.3) id BAA29673; Thu, 22 Jun 2000 01:59:03 -0700 Date: Thu, 22 Jun 2000 01:59:03 -0700 From: Richard Henderson To: Geert Uytterhoeven Cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support Message-ID: <20000622015903.A29666@twiddle.net> References: <20000622001916.A29550@twiddle.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0pre3us In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 22, 2000 at 09:41:58AM +0200, Geert Uytterhoeven wrote: > The problem is that drivers assume ISA memory space is at 0 and use e.g. > > request_mem_region(0xa0000, 65536) > > to request the legacy VGA region, while it should be > > request_mem_region(isa_mem_base+0xa0000, 65536) > > for compatibility with anything besides ia32. Well, yes and no. Again, what I'm saying is that one way to handle this is to *pretend* isa_mem_base==0, and that the entire ISA region is contiguous. Certainly that's good enough for region allocations. And if the damage is undone by ioremap, then the effect is not visible. I'm not disagreeing that it would make sense to make this all a bit more explicit with proper interfaces. However, I don't see that happening any time real soon. > > What does your bus configuration look like? > > There are multiple legacy ISA regions on some PowerMacs, which > have multiple PCI buses and such. I guessed that. I was hoping to get specifics. r~ From owner-linux-mips@oss.sgi.com Thu Jun 22 02:18:32 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 02:18:13 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:60493 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 02:17:49 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id CAA23723 for ; Thu, 22 Jun 2000 02:12:51 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id CAA58536 for ; Thu, 22 Jun 2000 02:17:17 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA84674 for ; Thu, 22 Jun 2000 02:15:29 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from mail.sonytel.be (mail.sonytel.be [193.74.243.200]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA09747 for ; Thu, 22 Jun 2000 02:15:27 -0700 (PDT) mail_from (Geert.Uytterhoeven@sonycom.com) Received: from dandelion.sonytel.be (dandelion.sonytel.be [193.74.243.153]) by mail.sonytel.be (8.9.0/8.8.6) with ESMTP id LAA27611; Thu, 22 Jun 2000 11:15:31 +0200 (MET DST) Date: Thu, 22 Jun 2000 11:15:31 +0200 (MET DST) From: Geert Uytterhoeven To: Richard Henderson cc: Linux kernel , Linux/PPC Development , Linux/MIPS Development Subject: Re: Proposal: non-PC ISA bus support In-Reply-To: <20000622015903.A29666@twiddle.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 22 Jun 2000, Richard Henderson wrote: > On Thu, Jun 22, 2000 at 09:41:58AM +0200, Geert Uytterhoeven wrote: > > The problem is that drivers assume ISA memory space is at 0 and use e.g. > > > > request_mem_region(0xa0000, 65536) > > > > to request the legacy VGA region, while it should be > > > > request_mem_region(isa_mem_base+0xa0000, 65536) > > > > for compatibility with anything besides ia32. > > Well, yes and no. Again, what I'm saying is that one way > to handle this is to *pretend* isa_mem_base==0, and that > the entire ISA region is contiguous. Certainly that's good > enough for region allocations. And if the damage is undone > by ioremap, then the effect is not visible. That works only if there's nothing else at address 0 that keeps the resource busy. > I'm not disagreeing that it would make sense to make this > all a bit more explicit with proper interfaces. However, > I don't see that happening any time real soon. Hence my proposal for isa_request_mem_region(). It allows platform specific code to take care of both the base address and the sparsity (if needed). > > > What does your bus configuration look like? > > > > There are multiple legacy ISA regions on some PowerMacs, which > > have multiple PCI buses and such. > > I guessed that. I was hoping to get specifics. Benjamin Herrenschmidt can tell you more about it. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From owner-linux-mips@oss.sgi.com Thu Jun 22 03:35:23 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 03:35:03 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:2627 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 03:34:34 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id DAA06148 for ; Thu, 22 Jun 2000 03:39:44 -0700 (PDT) mail_from (mailinglist@ichilton.co.uk) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id DAA97161 for ; Thu, 22 Jun 2000 03:34:03 -0700 (PDT) mail_from (mailinglist@ichilton.co.uk) Received: from mta02-svc.server.ntlworld.com (mta02-svc.ntlworld.com [62.253.162.42]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id DAA04335 for ; Thu, 22 Jun 2000 03:33:56 -0700 (PDT) mail_from (mailinglist@ichilton.co.uk) Received: from icserver.ichilton.co.uk ([62.252.240.39]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000622113337.JSVW10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Thu, 22 Jun 2000 11:33:37 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5MAX6v07846; Thu, 22 Jun 2000 11:33:06 +0100 From: "Ian Chilton" To: , "Linux Debian MIPS" , "Linux MIPS cthulhu" , "Linux MIPS" , "MIPS vger" Subject: RE: Problems with multiple harddisks on my Indigo2 Date: Thu, 22 Jun 2000 11:33:04 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Just to let you guys know... I just tried the 2x HD thing in IRIX (on my Indy), and no problems! So, it IS a Linux/MIPS problem!! I did: cp -R /usr /hd2 It was going for about 10 mins, before it ran out of disk space (1GB !). No errors at all :) Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | IRC Nick: GadgetMan | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Jun 22 07:37:25 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 07:37:15 -0700 Received: from mta07-svc.ntlworld.com ([62.253.162.47]:10370 "EHLO mta07-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 07:36:58 -0700 Received: from icserver.ichilton.co.uk ([62.252.240.253]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000622153514.LEQU10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk> for ; Thu, 22 Jun 2000 15:35:14 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5MEXjv14082 for ; Thu, 22 Jun 2000 15:33:45 +0100 From: "Ian Chilton" To: "Linux-MIPS Mailing List" Subject: Bootp Problems Date: Thu, 22 Jun 2000 15:33:44 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have been using bootp/tftp/nfs to boot my Indy fine, but I need to do something else on the linux machine that is acting as the server (which was my linux workstation), so I decided to move the bootp/tftp/nfs stuff to my main network server which is running Linux completly compiled from source. So, I compiled/installed the following: * bootp-2.4.3 * netkit-tftp-0.16 * tcp_wrappers_7.6 * portmap_5beta * nfs-server-2.2beta47 Now, I have tested the NFS from another linux box, and from the indy, and it seems to work fine. I have setup my bootp/tftp the same as before, and that is as follows: BTW network addresses: ICServer -> 192.168.0.1 -> Linux Server (the new bootp/tftp/nfs server) ICLinux -> 192.168.0.11 -> Linux W/S (the old bootp/tftp/nfs server) ICIndy -> 192.168.0.12 -> SGI Indy /etc/inetd.conf: tftp dgram udp wait root /usr/sbin/tcpd /usr/sbin/in.tftpd /export/simple bootps dgram udp wait root /usr/sbin/bootpd /etc/bootptab /etc/bootptab: icindy:hd=/export/simple:\ :rp=/export/simple:\ :ht=ethernet:\ :ha=080069082CD1:\ :ip=192.168.0.12:\ :bf=vmlinux:\ :sm=255.255.255.0:\ :to=7200: /etc/exports: /export/simple 192.168.0.12(no_root_swash,rw) I then did: kill -HUP ; Thu, 22 Jun 2000 08:14:35 -0700 Received: from hazeval.monmouth.com ([64.19.144.1]:34311 "EHLO www.hel-inc.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 08:14:28 -0700 Received: from rob ([192.168.0.106]) by www.hel-inc.com (8.9.3/8.9.3) with SMTP id PAA36926 for ; Thu, 22 Jun 2000 15:13:28 GMT (envelope-from current@hel-inc.com) From: "Robert W. Current, Ph.D." To: "Linux-MIPS Mailing List" Subject: Indy Questions. Date: Thu, 22 Jun 2000 11:11:07 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I'm picking up an Indy, and I had two questions. Can I do bootp and nfs? (no drive in the Indy at all). Is there X support at all? http://oss.sgi.com/mips/mips-howto.html says there is NONE. http://www.linux.sgi.com/status.html mentions Xsgi running on top of Linux. And I've also heard that XFree86 has been hacked to run on the XL frame buffer, such as what is mentioned on http://www.orcawerks.com/sgi/irix/linux.html I'll only be getting one with an 8-bit frame buffer, I'd like to get the 24-bit one later, but for now just 8... So, any comments on X at all? So, what's true? Also, there seems to be nothing at all on ftp://oss.sgi.com/ anymore, where has it all moved to? Thanks :-) Rob C. From owner-linux-mips@oss.sgi.com Thu Jun 22 08:42:55 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 08:42:45 -0700 Received: from noose.gt.owl.de ([62.52.19.4]:32262 "HELO noose.gt.owl.de") by oss.sgi.com with SMTP id ; Thu, 22 Jun 2000 08:42:33 -0700 Received: by noose.gt.owl.de (Postfix, from userid 10) id 393517DD; Thu, 22 Jun 2000 17:42:32 +0200 (CEST) Received: by paradigm.rfc822.org (Postfix, from userid 1000) id 049688F73; Thu, 22 Jun 2000 08:30:29 -0700 (PDT) Date: Thu, 22 Jun 2000 08:30:29 -0700 From: Florian Lohoff To: "Robert W. Current, Ph.D." Cc: Linux-MIPS Mailing List Subject: Re: Indy Questions. Message-ID: <20000622083029.B2238@paradigm.rfc822.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0.1i In-Reply-To: ; from current@hel-inc.com on Thu, Jun 22, 2000 at 11:11:07AM -0700 Organization: rfc822 - pure communication Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 22, 2000 at 11:11:07AM -0700, Robert W. Current, Ph.D. wrote: > I'm picking up an Indy, and I had two questions. > > Can I do bootp and nfs? (no drive in the Indy at all). Yep - Called "nfsroot" Flo -- Florian Lohoff flo@rfc822.org +49-waiting-4-telekom "If you're not having fun right now, you're wasting your time." From owner-linux-mips@oss.sgi.com Thu Jun 22 08:57:05 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 08:56:55 -0700 Received: from obelix.hrz.tu-chemnitz.de ([134.109.132.55]:57533 "EHLO obelix.hrz.tu-chemnitz.de") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 08:56:41 -0700 Received: from sunnyboy.informatik.tu-chemnitz.de by obelix.hrz.tu-chemnitz.de with Local SMTP (PP); Thu, 22 Jun 2000 17:56:13 +0200 Received: from scotty.mgnet.de (sulu.csn.tu-chemnitz.de [134.109.96.105]) by sunnyboy.informatik.tu-chemnitz.de (8.8.8/8.8.8) with SMTP id RAA11950 for ; Thu, 22 Jun 2000 17:56:10 +0200 (MET DST) Received: (qmail 30371 invoked from network); 22 Jun 2000 15:56:11 -0000 Received: from spock.mgnet.de (HELO scotty.mgnet.de) (192.168.1.4) by scotty.mgnet.de with SMTP; 22 Jun 2000 15:56:11 -0000 Date: Thu, 22 Jun 2000 17:56:10 +0200 From: Klaus Naumann To: "Robert W. Current, Ph.D." Cc: Linux-MIPS Mailing List Subject: Re: Indy Questions. Message-ID: <20000622175610.A331@spock> Reply-To: spock@mgnet.de References: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: ; from current@hel-inc.com on Thu, Jun 22, 2000 at 20:11:07 +0200 X-Mailer: Balsa 0.8.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, 22 Jun 2000 20:11:07 "Robert W. Current, Ph.D." wrote: > Is there X support at all? > http://oss.sgi.com/mips/mips-howto.html says there is NONE. Yes, there is now one - I'll also update the FAQ today. You may find it at: http://honk.physik.uni-konstanz.de/~agx/mipslinux/x/ > http://www.linux.sgi.com/status.html mentions Xsgi running on top of Linux. Better forget about that ;) What I heard it never really worked. > And I've also heard that XFree86 has been hacked to run on the XL frame > buffer, such as what is mentioned on > http://www.orcawerks.com/sgi/irix/linux.html I don't know about that one. But I recommend the one mentioned above anyway. It's based up on XFree86 4.0 and is maintained. > Also, there seems to be nothing at all on ftp://oss.sgi.com/ anymore, where > has it all moved to? That must be you - the project ftp server is still oss.sgi.com. See ftp://oss.sgi.com/pub/linux/mips/ - it's all there. CU, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Thu Jun 22 09:23:27 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 09:23:17 -0700 Received: from mta03-svc.ntlworld.com ([62.253.162.43]:47296 "EHLO mta03-svc.ntlworld.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 09:23:10 -0700 Received: from icserver.ichilton.co.uk ([62.252.240.59]) by mta03-svc.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000622162300.CIRG290.mta03-svc.ntlworld.com@icserver.ichilton.co.uk> for ; Thu, 22 Jun 2000 17:23:00 +0100 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5MGLJZ00702 for ; Thu, 22 Jun 2000 17:22:19 +0100 From: "Ian Chilton" To: "Linux-MIPS Mailing List" Subject: RE: Bootp Problems Date: Thu, 22 Jun 2000 17:21:20 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I have just had a thought and tried disabling the firewall on this machine, and now get I: [SNIP OK STUFF] eth0: SGI Seeq8003 08:00:69:08:2c:d1 Sending BOOTP requests.....OK IP-Config: Got BOOTP Answer from 192.168.0.1, my address is 192.168.0.12 Partition check: sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sdb: sdb1 sdb2 sdb3 Looking up port of RPC 100003/2 on 192.168.0.1 Looking up port of RPC 100005/1 on 192.168.0.1 Root-NFS: Unable to get nfsd port number from server, using default mount: RPC call returned error 146 RPC: talk of released request still queued! RPC: (task is on xprt_pending) Root-NFS: Server returned error -146 while mounting /export/simple VFS: Unable to mount root fs via NFS, trying floppy VFS: Cannot open root device 02:00 Kernel Panic: VFS: Unable to mount root device on 02:00 Better than before, anyway! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Jun 22 15:29:54 2000 Received: by oss.sgi.com id ; Thu, 22 Jun 2000 15:29:44 -0700 Received: from mta01-svc.ntlworld.com ([62.253.162.41]:3833 "EHLO mta01-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Thu, 22 Jun 2000 15:29:30 -0700 Received: from icserver.ichilton.co.uk ([62.252.236.190]) by mta02-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000622232436.OCPH10065.mta02-svc.server.ntlworld.com@icserver.ichilton.co.uk> for ; Thu, 22 Jun 2000 23:24:36 +0000 Received: from ian (ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5MMNZC02639 for ; Thu, 22 Jun 2000 23:23:36 +0100 From: "Ian Chilton" To: "Linux-MIPS Mailing List" Subject: RE: Bootp Problems Date: Thu, 22 Jun 2000 23:23:38 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 In-Reply-To: Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Problems fixed! The origional problem was my firewall, and the later problem was, I had a script to start portmap, rpc.mountd and rpc.nfsd, at boot time. However, when I log in after booting, rpc.mountd is no longer loaded. So, the only fix was to stop the 'startnfs' script being run at boottime, and run it manually. Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 23 02:13:57 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 02:13:47 -0700 Received: from gandalf.physik.uni-konstanz.de ([134.34.144.30]:35136 "EHLO gandalf.physik.uni-konstanz.de") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 02:13:33 -0700 Received: from bert.physik.uni-konstanz.de [134.34.144.20] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 135PVY-00037y-00; Fri, 23 Jun 2000 11:12:16 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Fri, 23 Jun 2000 11:06:13 +0200 Date: Fri, 23 Jun 2000 11:06:13 +0200 From: Guido Guenther To: Klaus Naumann Cc: "Robert W. Current, Ph.D." , Linux-MIPS Mailing List Subject: Re: Indy Questions. Message-ID: <20000623110613.B4011@bert.physik.uni-konstanz.de> References: <20000622175610.A331@spock> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i In-Reply-To: <20000622175610.A331@spock>; from spock@mgnet.de on Thu, Jun 22, 2000 at 05:56:10PM +0200 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 22, 2000 at 05:56:10PM +0200, Klaus Naumann wrote: > On Thu, 22 Jun 2000 20:11:07 "Robert W. Current, Ph.D." wrote: > > Is there X support at all? > > http://oss.sgi.com/mips/mips-howto.html says there is NONE. > Yes, there is now one - I'll also update the FAQ today. > You may find it at: > http://honk.physik.uni-konstanz.de/~agx/mipslinux/x/ [..snip..] This has moved to: ftp://oss.sgi.com/pub/linux/mips/X/ Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Fri Jun 23 07:33:47 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 07:33:37 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:48723 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 07:33:12 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id HAA07615 for ; Fri, 23 Jun 2000 07:38:15 -0700 (PDT) mail_from (dkeen@bellsouth.net) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA89479 for ; Fri, 23 Jun 2000 07:32:20 -0700 (PDT) mail_from (dkeen@bellsouth.net) Received: from mail2.mco.bellsouth.net (mail2.mco.bellsouth.net [205.152.111.14]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA09535 for ; Fri, 23 Jun 2000 07:32:19 -0700 (PDT) mail_from (dkeen@bellsouth.net) Received: from bellsouth.net (host-209-214-105-157.bhm.bellsouth.net [209.214.105.157]) by mail2.mco.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id KAA17437; Fri, 23 Jun 2000 10:21:18 -0400 (EDT) Message-ID: <39537366.5BCF325C@bellsouth.net> Date: Fri, 23 Jun 2000 09:25:42 -0500 From: David Keen X-Mailer: Mozilla 4.7 [en]C-bls40 (WinNT; U) X-Accept-Language: en MIME-Version: 1.0 To: Ian Chilton CC: spock@mgnet.de, Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Subject: Re: Problems with multiple harddisks on my Indigo2 References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Good Morning, The SCSI reset problem occurred on my Indy after I added a Floptical on ID 2. I am not running Linux on the box at this time. Have upgraded to 6.2 from 5.3 but haven't tried to reinstall the floptical yet. Set jumpers to Indy specs, so am unsure why. BTW, would the Indy boot from the floptical for Linux without doing a net boot? Sincerely, Dave Keen Ian Chilton wrote: > > Hello, > > Just to let you guys know... > > I just tried the 2x HD thing in IRIX (on my Indy), and no problems! So, it > IS a Linux/MIPS problem!! > > I did: cp -R /usr /hd2 > > It was going for about 10 mins, before it ran out of disk space (1GB !). No > errors at all :) > > Bye for Now, > > Ian > > \|||/ > (o o) > /----------------ooO-(_)-Ooo----------------\ > | Ian Chilton | > | IRC Nick: GadgetMan | > | E-Mail : ian@ichilton.co.uk | > \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Fri Jun 23 07:45:47 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 07:45:36 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:53521 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 07:45:22 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id HAA03268 for ; Fri, 23 Jun 2000 07:40:17 -0700 (PDT) mail_from (spock@mgnet.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id HAA94632 for ; Fri, 23 Jun 2000 07:44:38 -0700 (PDT) mail_from (spock@mgnet.de) Received: from asterix.hrz.tu-chemnitz.de (asterix.hrz.tu-chemnitz.de [134.109.132.84]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id HAA01658 for ; Fri, 23 Jun 2000 07:44:33 -0700 (PDT) mail_from (spock@mgnet.de) Received: from sunnyboy.informatik.tu-chemnitz.de by asterix.hrz.tu-chemnitz.de with Local SMTP (PP); Fri, 23 Jun 2000 16:44:29 +0200 Received: from scotty.mgnet.de (sevenofnine.csn.tu-chemnitz.de [134.109.96.133]) by sunnyboy.informatik.tu-chemnitz.de (8.8.8/8.8.8) with SMTP id QAA02221 for ; Fri, 23 Jun 2000 16:44:26 +0200 (MET DST) Received: (qmail 21769 invoked from network); 23 Jun 2000 14:44:27 -0000 Received: from spock.mgnet.de (HELO scotty.mgnet.de) (192.168.1.4) by scotty.mgnet.de with SMTP; 23 Jun 2000 14:44:27 -0000 Date: Fri, 23 Jun 2000 16:44:42 +0200 From: Klaus Naumann To: David Keen Cc: Ian Chilton , spock@mgnet.de, Linux Debian MIPS , Linux MIPS cthulhu , Linux MIPS , MIPS vger Subject: Re: Problems with multiple harddisks on my Indigo2 Message-ID: <20000623164442.A892@spock> Reply-To: spock@mgnet.de References: <39537366.5BCF325C@bellsouth.net> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit In-Reply-To: <39537366.5BCF325C@bellsouth.net>; from dkeen@bellsouth.net on Fri, Jun 23, 2000 at 16:25:42 +0200 X-Mailer: Balsa 0.8.0 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, 23 Jun 2000 16:25:42 David Keen wrote: > jumpers to Indy specs, so am unsure why. BTW, would the Indy boot from > the floptical for Linux without doing a net boot? I've heard from someone that it is possible - but I'm not sure - try it ;) CU, Klaus -- Full Name : Klaus Naumann | (http://www.mgnet.de/) (Germany) Nickname : Spock | Org.: Mad Guys Network Phone / FAX : ++49/177/7862964 | E-Mail: (spock@mgnet.de) PGP Key : www.mgnet.de/keys/key_spock.txt From owner-linux-mips@oss.sgi.com Fri Jun 23 09:24:49 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 09:24:39 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:44388 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 09:24:18 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id JAA00650 for ; Fri, 23 Jun 2000 09:29:29 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id JAA19837 for ; Fri, 23 Jun 2000 09:23:45 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id JAA02278 for ; Fri, 23 Jun 2000 09:23:44 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from bert.physik.uni-konstanz.de [134.34.144.20] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 135WFD-0004bU-00; Fri, 23 Jun 2000 18:23:51 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Fri, 23 Jun 2000 18:17:38 +0200 Date: Fri, 23 Jun 2000 18:17:37 +0200 From: Guido Guenther To: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: XFree 4.0.1 on mips, mipsel Message-ID: <20000623181736.A13410@bert.physik.uni-konstanz.de> Mail-Followup-To: Guido Guenther , linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I've submitted several patches to the XFree-Project to include at least basic support for mips/mipsel architecture. These are based on previous work done by Ralf Baechle, Ulf Carlson, Gleb O. Reiko & Nina A. Podolskaya. I hope I didn't break anything. The patches are known to work on the Indy but are AFAIK untested on other mips machines and appear in the alpha version of xfree which can be checked out of the repository at sourceforge, see: http://www.xfree86.org/cvs/ Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Fri Jun 23 09:52:19 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 09:52:09 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:62553 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 09:52:01 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id JAA20874 for ; Fri, 23 Jun 2000 09:47:02 -0700 (PDT) mail_from (brad@ltc.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id JAA21382 for ; Fri, 23 Jun 2000 09:51:29 -0700 (PDT) mail_from (brad@ltc.com) Received: from ltc.com (ltc.ltc.com [38.149.17.171]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id JAA08385 for ; Fri, 23 Jun 2000 09:51:27 -0700 (PDT) mail_from (brad@ltc.com) Received: from gw1.ltc.com (gw1.ltc.com [38.149.17.163]) by ltc.com (NTMail 3.03.0017/1.afdd) with ESMTP id ea313304 for ; Fri, 23 Jun 2000 12:55:37 -0400 Message-ID: <014f01bfdd33$8877b3c0$0701010a@ltc.com> From: "Bradley D. LaRonde" To: "Guido Guenther" , , References: <20000623181736.A13410@bert.physik.uni-konstanz.de> Subject: Re: XFree 4.0.1 on mips, mipsel Date: Fri, 23 Jun 2000 12:53:19 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing ----- Original Message ----- From: "Guido Guenther" To: ; Sent: Friday, June 23, 2000 12:17 PM Subject: XFree 4.0.1 on mips, mipsel > I've submitted several patches to the XFree-Project to include at least > basic support for mips/mipsel architecture. These are based on previous > work done by Ralf Baechle, Ulf Carlson, Gleb O. Reiko & Nina A. > Podolskaya. I hope I didn't break anything. > The patches are known to work on the Indy but are AFAIK untested on other > mips machines and appear in the alpha version of xfree which can be checked > out of the repository at sourceforge, see: http://www.xfree86.org/cvs/ > Regards, > -- Guido Hmm... I use XFree 4.0 on my mipsel platform with no core paches (just some config stuff and some kdrive stuff). What do your patches do? Regards, Brad From owner-linux-mips@oss.sgi.com Fri Jun 23 10:02:40 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:02:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:37472 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:02:24 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id JAA22313 for ; Fri, 23 Jun 2000 09:57:25 -0700 (PDT) mail_from (kei@sm.sony.co.jp) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA32138 for ; Fri, 23 Jun 2000 10:01:52 -0700 (PDT) mail_from (kei@sm.sony.co.jp) Received: from ns4.sony.co.jp (ns4.Sony.CO.JP [202.238.80.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA03444 for ; Fri, 23 Jun 2000 10:01:51 -0700 (PDT) mail_from (kei@sm.sony.co.jp) Received: from mail1.sony.co.jp (gatekeeper7.Sony.CO.JP [202.238.80.21]) by ns4.sony.co.jp (R8) with ESMTP id CAA85245; Sat, 24 Jun 2000 02:02:02 +0900 (JST) Received: from smail1.sm.sony.co.jp (smail1.sm.sony.co.jp [43.11.253.1]) by mail1.sony.co.jp (R8) with ESMTP id CAA24709; Sat, 24 Jun 2000 02:02:02 +0900 (JST) Received: from email.sm.sony.co.jp (email.sm.sony.co.jp [43.11.253.2]) by smail1.sm.sony.co.jp (8.8.8/3.6W) with ESMTP id CAA00783; Sat, 24 Jun 2000 02:01:36 +0900 (JST) Received: from sm.sony.co.jp (kei@gaia.sm.sony.co.jp [43.11.132.48]) by email.sm.sony.co.jp (8.8.8/3.6W) with ESMTP id BAA07344; Sat, 24 Jun 2000 01:57:30 +0900 (JST) Message-Id: <200006231657.BAA07344@email.sm.sony.co.jp> To: "Bradley D. LaRonde" cc: "Guido Guenther" , linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: Re: XFree 4.0.1 on mips, mipsel In-reply-to: Your message of Fri, 23 Jun 2000 12:53:19 -0400. <014f01bfdd33$8877b3c0$0701010a@ltc.com> Date: Sat, 24 Jun 2000 02:02:00 +0900 From: Hiroshi Kawashima Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Hmm... I use XFree 4.0 on my mipsel platform with no core paches (just some > config stuff and some kdrive stuff). Brad, are your patches (around kdrive) already public ? It's desired... ---- Kawashima From owner-linux-mips@oss.sgi.com Fri Jun 23 10:07:10 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:07:00 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:361 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:06:54 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id KAA08188 for ; Fri, 23 Jun 2000 10:12:06 -0700 (PDT) mail_from (brad@ltc.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA30247 for ; Fri, 23 Jun 2000 10:06:23 -0700 (PDT) mail_from (brad@ltc.com) Received: from ltc.com (ltc.ltc.com [38.149.17.171]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id KAA05829 for ; Fri, 23 Jun 2000 10:06:18 -0700 (PDT) mail_from (brad@ltc.com) Received: from gw1.ltc.com (gw1.ltc.com [38.149.17.163]) by ltc.com (NTMail 3.03.0017/1.afdd) with ESMTP id ia313308 for ; Fri, 23 Jun 2000 13:10:35 -0400 Message-ID: <018701bfdd35$9f91a230$0701010a@ltc.com> From: "Bradley D. LaRonde" To: "Hiroshi Kawashima" Cc: "Guido Guenther" , , References: <200006231657.BAA07344@email.sm.sony.co.jp> Subject: Re: XFree 4.0.1 on mips, mipsel Date: Fri, 23 Jun 2000 13:08:16 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing ----- Original Message ----- From: "Hiroshi Kawashima" To: "Bradley D. LaRonde" Cc: "Guido Guenther" ; ; Sent: Friday, June 23, 2000 1:02 PM Subject: Re: XFree 4.0.1 on mips, mipsel > > Hmm... I use XFree 4.0 on my mipsel platform with no core paches (just some > > config stuff and some kdrive stuff). > Brad, are your patches (around kdrive) already public ? > It's desired... No, they are still in a state of flux. I'm hacking away at new issues, like mixed-endan frame buffer support. Some if it is really hacked at this point. Regards, Brad From owner-linux-mips@oss.sgi.com Fri Jun 23 10:08:41 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:08:30 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:33635 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:08:16 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA23077 for ; Fri, 23 Jun 2000 10:03:18 -0700 (PDT) mail_from (agx@bert.physik.uni-konstanz.de) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id KAA76918 for ; Fri, 23 Jun 2000 10:06:30 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA24008 for ; Fri, 23 Jun 2000 10:04:43 -0700 (PDT) mail_from (agx@bert.physik.uni-konstanz.de) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA06189 for ; Fri, 23 Jun 2000 10:04:41 -0700 (PDT) mail_from (agx@bert.physik.uni-konstanz.de) Received: from ernie.physik.uni-konstanz.de (bert.physik.uni-konstanz.de) [134.34.144.19] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 135Wsr-0004fV-00; Fri, 23 Jun 2000 19:04:49 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Fri, 23 Jun 2000 18:55:54 +0200 Date: Fri, 23 Jun 2000 18:55:54 +0200 From: Guido Guenther To: "Bradley D. LaRonde" Cc: linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel Message-ID: <20000623185553.A20888@bert.physik.uni-konstanz.de> Mail-Followup-To: Guido Guenther , "Bradley D. LaRonde" , linux-mips , linux References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i In-Reply-To: <014f01bfdd33$8877b3c0$0701010a@ltc.com>; from brad@ltc.com on Fri, Jun 23, 2000 at 12:53:19PM -0400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Jun 23, 2000 at 12:53:19PM -0400, Bradley D. LaRonde wrote: > ----- Original Message ----- > From: "Guido Guenther" [..snip..] > Hmm... I use XFree 4.0 on my mipsel platform with no core paches (just some > config stuff and some kdrive stuff). > > What do your patches do? It adds the neccessary config stuff to config/cf and sorts out the proper architecture dependent routines in xfree86/os-support. Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Fri Jun 23 10:11:01 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:10:50 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:58724 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:10:41 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA23517 for ; Fri, 23 Jun 2000 10:05:43 -0700 (PDT) mail_from (brad@ltc.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id KAA89318 for ; Fri, 23 Jun 2000 10:08:56 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA34067 for ; Fri, 23 Jun 2000 10:07:08 -0700 (PDT) mail_from (brad@ltc.com) Received: from ltc.com (ltc.ltc.com [38.149.17.171]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id KAA07893 for ; Fri, 23 Jun 2000 10:07:04 -0700 (PDT) mail_from (brad@ltc.com) Received: from gw1.ltc.com (gw1.ltc.com [38.149.17.163]) by ltc.com (NTMail 3.03.0017/1.afdd) with ESMTP id la313311 for ; Fri, 23 Jun 2000 13:11:21 -0400 Message-ID: <019501bfdd35$bb301940$0701010a@ltc.com> From: "Bradley D. LaRonde" To: "Guido Guenther" Cc: "linux-mips" , "linux" References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> Subject: Re: XFree 4.0.1 on mips, mipsel Date: Fri, 23 Jun 2000 13:09:03 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing ----- Original Message ----- From: "Guido Guenther" To: "Bradley D. LaRonde" Cc: "linux-mips" ; "linux" Sent: Friday, June 23, 2000 12:55 PM Subject: Re: XFree 4.0.1 on mips, mipsel > On Fri, Jun 23, 2000 at 12:53:19PM -0400, Bradley D. LaRonde wrote: > > ----- Original Message ----- > > From: "Guido Guenther" > [..snip..] > > Hmm... I use XFree 4.0 on my mipsel platform with no core paches (just some > > config stuff and some kdrive stuff). > > > > What do your patches do? > It adds the neccessary config stuff to config/cf and sorts out the proper > architecture dependent routines in xfree86/os-support. Oh, ok, makes sense. May I have a copy of those patches for review? Regards, Brad From owner-linux-mips@oss.sgi.com Fri Jun 23 10:17:10 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:17:01 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:7528 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:16:50 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA24288 for ; Fri, 23 Jun 2000 10:11:52 -0700 (PDT) mail_from (agx@bert.physik.uni-konstanz.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA30909 for ; Fri, 23 Jun 2000 10:16:19 -0700 (PDT) mail_from (agx@bert.physik.uni-konstanz.de) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA00149 for ; Fri, 23 Jun 2000 10:16:17 -0700 (PDT) mail_from (agx@bert.physik.uni-konstanz.de) Received: from ernie.physik.uni-konstanz.de (bert.physik.uni-konstanz.de) [134.34.144.19] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 135X3z-0004hJ-00; Fri, 23 Jun 2000 19:16:19 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Fri, 23 Jun 2000 19:07:24 +0200 Date: Fri, 23 Jun 2000 19:07:24 +0200 From: Guido Guenther To: "Bradley D. LaRonde" Cc: linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel Message-ID: <20000623190723.B20888@bert.physik.uni-konstanz.de> Mail-Followup-To: Guido Guenther , "Bradley D. LaRonde" , linux-mips , linux References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="ZPt4rx8FFjLCG7dd" Content-Disposition: inline User-Agent: Mutt/1.1.9i In-Reply-To: <019501bfdd35$bb301940$0701010a@ltc.com>; from brad@ltc.com on Fri, Jun 23, 2000 at 01:09:03PM -0400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing --ZPt4rx8FFjLCG7dd Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Fri, Jun 23, 2000 at 01:09:03PM -0400, Bradley D. LaRonde wrote: [..snip..] > May I have a copy of those patches for review? They look basically like this(Imake.cf additionally checks for mipsel): -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc --ZPt4rx8FFjLCG7dd Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="mips.diff" Index: xfree86/xc/config/cf/Imake.cf diff -c xfree86/xc/config/cf/Imake.cf:1.1.1.1 xfree86/xc/config/cf/Imake.cf:1.2 *** xfree86/xc/config/cf/Imake.cf:1.1.1.1 Mon May 8 10:58:59 2000 --- xfree86/xc/config/cf/Imake.cf Mon May 8 19:45:56 2000 *************** *** 603,608 **** --- 603,612 ---- # endif # undef __sparc__ # endif + # ifdef mips + # define MipsArchitecture + # undef mips + # endif /* for compatibility with 3.3.x */ # ifdef PpcArchitecture # define PowerPCArchitecture Index: xfree86/xc/config/cf/linux.cf diff -c xfree86/xc/config/cf/linux.cf:1.1.1.1 xfree86/xc/config/cf/linux.cf:1.4 *** xfree86/xc/config/cf/linux.cf:1.1.1.1 Mon May 8 10:58:57 2000 --- xfree86/xc/config/cf/linux.cf Wed May 31 15:26:31 2000 *************** *** 5,10 **** --- 5,15 ---- #define LinuxElfDefault YES #endif + /* Loadable Modules are currently not working on mips */ + #ifdef MipsArchitecture + #define DoLoadableServer NO + #endif + #ifndef UseElfFormat #define UseElfFormat LinuxElfDefault #endif *************** *** 289,294 **** --- 294,302 ---- #define MkdirHierCmd mkdir -p #if LinuxElfDefault #if UseElfFormat + # ifdef MipsArchitecture + # define AsCmd gcc -c -x assembler-with-cpp + # endif /* MipsArchitecure */ #ifndef CcCmd #define CcCmd gcc #endif *************** *** 468,473 **** --- 476,488 ---- #define PositionIndependentCFlags -fpic #define PositionIndependentCplusplusFlags -fpic #endif + + #ifdef MipsArchitecture + #define OptimizedCDebugFlags -O2 + #define LinuxMachineDefines -D__mips__ + #define ServerOSDefines XFree86ServerOSDefines -DDDXTIME -DPART_NET + #define ServerExtraDefines -DGCCUSESGAS XFree86ServerDefines + #endif #ifndef StandardDefines #define StandardDefines -Dlinux LinuxMachineDefines LinuxSourceDefines *************** *** 264,269 **** --- 264,301 ---- # define XF86CardDrivers fbdev XF86ExtraCardDrivers # endif + #endif + + /* Mips drivers */ + + #ifdef MipsArchitecture + # ifndef XF86Server + # define XF86Server YES + # endif + /* shadow fb module */ + # ifndef XFShadowFB + # define XFShadowFB YES + # endif + /* XAA module */ + # ifndef XF86XAA + # define XF86XAA YES + # endif + /* ramdac module */ + # ifndef XF86Ramdac + # define XF86Ramdac YES + # endif + /* RAC (Resource Access Control) module */ + # ifndef XF86RAC + # define XF86RAC YES + # endif + /* int10 module */ + # ifndef XF86Int10 + # define XF86Int10 YES + # endif + + # ifndef XF86CardDrivers + # define XF86CardDrivers XF86ExtraCardDrivers + # endif #endif /* Index: xfree86/xc/programs/Xserver/hw/xfree86/Imakefile diff -c xfree86/xc/programs/Xserver/hw/xfree86/Imakefile:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/Imakefile:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/Imakefile:1.1.1.1 Mon May 8 11:03:25 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/Imakefile Mon May 8 19:50:23 2000 *************** *** 65,71 **** #if !defined(OsfArchitecture) && !defined(AmoebaArchitecture) && \ !defined(ArcArchitecture) && !defined(Arm32Architecture) && \ ! !defined(PpcArchitecture) SUPERPROBE = SuperProbe #endif --- 65,71 ---- #if !defined(OsfArchitecture) && !defined(AmoebaArchitecture) && \ !defined(ArcArchitecture) && !defined(Arm32Architecture) && \ ! !defined(PpcArchitecture) && !defined(MipsArchitecture) SUPERPROBE = SuperProbe #endif Index: xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Bus.c diff -c xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Bus.c:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Bus.c:1.3 *** xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Bus.c:1.1.1.1 Mon May 8 11:03:45 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Bus.c Mon May 15 10:30:07 2000 *************** *** 2802,2808 **** static void CheckGenericGA() { ! #if !defined(__sparc__) && !defined(__powerpc__) /* FIXME ?? */ CARD16 GenericIOBase = VGAHW_GET_IOBASE(); CARD8 CurrentValue, TestValue; --- 2802,2808 ---- static void CheckGenericGA() { ! #if !defined(__sparc__) && !defined(__powerpc__) && !defined(__mips__) /* FIXME ?? */ CARD16 GenericIOBase = VGAHW_GET_IOBASE(); CARD8 CurrentValue, TestValue; Index: xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Io.c diff -c xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Io.c:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Io.c:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Io.c:1.1.1.1 Mon May 8 11:03:48 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/common/xf86Io.c Mon May 8 19:50:50 2000 *************** *** 396,402 **** return (Success); } ! #if !defined(AMOEBA) && !(defined (sun) && defined(i386) && defined (SVR4)) && !defined(MINIX) && !defined(__mips__) && !defined(QNX4) /* * These are getting tossed in here until I can think of where * they really belong --- 396,402 ---- return (Success); } ! #if !defined(AMOEBA) && !(defined (sun) && defined(i386) && defined (SVR4)) && !defined(MINIX) && !(defined(__mips__) && !defined(linux)) && !defined(QNX4) /* * These are getting tossed in here until I can think of where * they really belong Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/Xinstall.sh diff -c xfree86/xc/programs/Xserver/hw/xfree86/etc/Xinstall.sh:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/etc/Xinstall.sh:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/etc/Xinstall.sh:1.1.1.1 Mon May 8 11:04:38 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/Xinstall.sh Wed May 24 14:58:49 2000 *************** *** 417,422 **** --- 417,432 ---- ;; esac ;; + mips) + case "$OsLibcMajor.$OsLibcMinor" in + 6.0) + DistName="Linux-mips-glibc20" + ;; + *) + Message="No Linux/Mips binaries for this libc version" + ;; + esac + ;; *) Message="No Linux binaries available for this architecture" ;; Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/bin-excl diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/bin-excl:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/bin-excl Thu Jun 22 13:56:31 2000 *************** *** 0 **** --- 1,10 ---- + bin/XF86_* + bin/XF98_* + bin/XF86Setup + bin/Xnest + bin/Xprt + bin/Xvfb + bin/X + bin/xfs + bin/xmseconfig + bin/XFree86 Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/bin-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/bin-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/bin-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1,60 ---- + bin + lib/libGL.so.1.2 + lib/libGL.so.1 + lib/libGL.so + lib/libICE.so.6.3 + lib/libICE.so.6 + lib/libICE.so + lib/libPEX5.so.6.0 + lib/libPEX5.so.6 + lib/libPEX5.so + lib/libSM.so.6.0 + lib/libSM.so.6 + lib/libSM.so + lib/libX11.so.6.1 + lib/libX11.so.6 + lib/libX11.so + lib/libXIE.so.6.0 + lib/libXIE.so.6 + lib/libXIE.so + lib/libXaw.so.6.1 + lib/libXaw.so.6 + lib/libXaw.so.7.0 + lib/libXaw.so.7 + lib/libXaw.so + lib/libXext.so.6.4 + lib/libXext.so.6 + lib/libXext.so + lib/libXfont.so.1.3 + lib/libXfont.so.1 + lib/libXfont.so + lib/libXi.so.6.0 + lib/libXi.so.6 + lib/libXi.so + lib/libXmu.so.6.1 + lib/libXmu.so.6 + lib/libXmu.so + lib/libXp.so.6.2 + lib/libXp.so.6 + lib/libXp.so + lib/libXpm.so.4.11 + lib/libXpm.so.4 + lib/libXpm.so + lib/libXt.so.6.0 + lib/libXt.so.6 + lib/libXt.so + lib/libXtst.so.6.1 + lib/libXtst.so.6 + lib/libXtst.so + lib/libdps.so.1.0 + lib/libdps.so.1 + lib/libdps.so + lib/libdpstk.so.1.0 + lib/libdpstk.so.1 + lib/libdpstk.so + lib/libpsres.so.1.0 + lib/libpsres.so.1 + lib/libpsres.so + lib/libxrx.so.6.3 + lib/libxrx.so.6 + lib/libxrx.so Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/dir diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/dir:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/dir Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1 ---- + usr/X11R6 Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/etc-dir diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/etc-dir:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/etc-dir Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1 ---- + etc/X11 Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/etc-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/etc-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/etc-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1 ---- + . Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/fsrv-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/fsrv-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/fsrv-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1,2 ---- + bin/xfs + man/man1/xfs.1x Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/host.def diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/host.def:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/host.def Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1,5 ---- + /* + * Host.def for building Linux/Mips bindists + * + */ + #define DoLoadableServer NO Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/lib-excl diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/lib-excl:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/lib-excl Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1,14 ---- + lib/X11/XF86Setup + lib/X11/app-defaults + lib/X11/config + lib/X11/doc + lib/X11/fonts + lib/X11/fs + lib/X11/lbxproxy + lib/X11/proxymngr + lib/X11/rstart + lib/X11/twm + lib/X11/xdm + lib/X11/xinit + lib/X11/xsm + lib/X11/xserver Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/lib-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/lib-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/lib-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1,2 ---- + lib/X11 + include/X11/bitmaps Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/man-excl diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/man-excl:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/man-excl Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1,3 ---- + man/man1/XF86Setup.1x + man/man1/xfs.1x + man/man1/xmseconfig.1x Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/man-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/man-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/man-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1 ---- + man Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/mod-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/mod-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/mod-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1 ---- + lib/modules Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/nest-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/nest-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/nest-list Thu Jun 22 13:56:32 2000 *************** *** 0 **** --- 1 ---- + bin/Xnest Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prog-excl diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prog-excl:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prog-excl Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1,5 ---- + lib/Server + lib/X11 + lib/lib*.so* + lib/modules + include/X11/bitmaps Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prog-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prog-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prog-list Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1,3 ---- + lib + include + lib/X11/config Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prt-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prt-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/prt-list Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1 ---- + bin/Xprt Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/set-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/set-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/set-list Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1,5 ---- + bin/XF86Setup + bin/xmseconfig + lib/X11/XF86Setup + man/man1/XF86Setup.1x + man/man1/xmseconfig.1x Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/var-dir diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/var-dir:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/var-dir Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1 ---- + var Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/var-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/var-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/var-list Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1 ---- + state Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/vfb-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/vfb-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/vfb-list Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1 ---- + bin/Xvfb Index: xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/xserv-list diff -c /dev/null xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/xserv-list:1.1 *** /dev/null Fri Jun 23 09:28:49 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/etc/bindist/Linux-mips/xserv-list Thu Jun 22 13:56:33 2000 *************** *** 0 **** --- 1,2 ---- + bin/XFree86 + bin/X Index: xfree86/xc/programs/Xserver/hw/xfree86/os-support/Imakefile diff -c xfree86/xc/programs/Xserver/hw/xfree86/os-support/Imakefile:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/os-support/Imakefile:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/os-support/Imakefile:1.1.1.1 Mon May 8 11:04:56 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/os-support/Imakefile Mon May 8 19:51:48 2000 *************** *** 13,19 **** #if defined(i386Architecture) || defined(ia64Architecture) || \ (defined(LinuxArchitecture) && defined(AlphaArchitecture)) || \ (defined(FreeBSDArchitecture) && defined(AlphaArchitecture)) || \ ! defined(PpcArchitecture) || defined(SparcArchitecture) BUS_SUBDIR = bus #endif --- 13,20 ---- #if defined(i386Architecture) || defined(ia64Architecture) || \ (defined(LinuxArchitecture) && defined(AlphaArchitecture)) || \ (defined(FreeBSDArchitecture) && defined(AlphaArchitecture)) || \ ! defined(PpcArchitecture) || defined(SparcArchitecture) || \ ! (defined(LinuxArchitecture) && defined(MipsArchitecture)) BUS_SUBDIR = bus #endif Index: xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Imakefile diff -c xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Imakefile:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Imakefile:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Imakefile:1.1.1.1 Mon May 8 11:04:57 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Imakefile Mon May 8 19:52:03 2000 *************** *** 21,27 **** PCIDRVRSRC = sparcPci.c PCIDRVROBJ = sparcPci.o ! #elif defined(LinuxArchitecture) && defined(PpcArchitecture) XCOMM generic linux PCI driver (using /proc/bus/pci, requires kernel 2.2) --- 21,27 ---- PCIDRVRSRC = sparcPci.c PCIDRVROBJ = sparcPci.o ! #elif defined(LinuxArchitecture) && (defined(PpcArchitecture) || defined(MipsArchitecture)) XCOMM generic linux PCI driver (using /proc/bus/pci, requires kernel 2.2) Index: xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Pci.h diff -c xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Pci.h:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Pci.h:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Pci.h:1.1.1.1 Mon May 8 11:04:57 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/os-support/bus/Pci.h Mon May 8 19:52:03 2000 *************** *** 136,142 **** /* * Select architecture specific PCI init function */ ! #if defined(__powerpc__) && defined(linux) # define ARCH_PCI_INIT linuxPciInit # define INCLUDE_XF86_MAP_PCI_MEM #elif defined(__powerpc__) --- 136,142 ---- /* * Select architecture specific PCI init function */ ! #if (defined(__powerpc__) || defined(__mips__)) && defined(linux) # define ARCH_PCI_INIT linuxPciInit # define INCLUDE_XF86_MAP_PCI_MEM #elif defined(__powerpc__) Index: xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnxResource.c diff -c xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnxResource.c:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnxResource.c:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnxResource.c:1.1.1.1 Mon May 8 11:05:02 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnxResource.c Mon May 8 19:53:04 2000 *************** *** 150,156 **** return ret; } ! #elif defined(__powerpc__) /* XXX this isn't exactly correct but it will get the server working * for now until we get something better. --- 150,156 ---- return ret; } ! #elif defined(__powerpc__) || defined(__mips__) /* XXX this isn't exactly correct but it will get the server working * for now until we get something better. Index: xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_video.c diff -c xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_video.c:1.1.1.1 xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_video.c:1.2 *** xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_video.c:1.1.1.1 Mon May 8 11:05:02 2000 --- xfree86/xc/programs/Xserver/hw/xfree86/os-support/linux/lnx_video.c Mon May 8 19:53:04 2000 *************** *** 385,391 **** if (ExtendedEnabled) return; ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) if (iopl(3)) FatalError("%s: Failed to set IOPL for I/O\n", "xf86EnableIOPorts"); --- 385,391 ---- if (ExtendedEnabled) return; ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) && !defined(__mips__) if (iopl(3)) FatalError("%s: Failed to set IOPL for I/O\n", "xf86EnableIOPorts"); *************** *** 401,407 **** if (!ExtendedEnabled) return; ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) iopl(0); #endif ExtendedEnabled = FALSE; --- 401,407 ---- if (!ExtendedEnabled) return; ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) && !defined(__mips__) iopl(0); #endif ExtendedEnabled = FALSE; *************** *** 418,428 **** xf86DisableInterrupts() { if (!ExtendedEnabled) ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) if (iopl(3)) return (FALSE); #endif ! #if defined(__alpha__) || defined(__mc68000__) || defined(__powerpc__) || defined(__sparc__) #else #ifdef __GNUC__ #if defined(__ia64__) --- 418,428 ---- xf86DisableInterrupts() { if (!ExtendedEnabled) ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) && !defined(__mips__) if (iopl(3)) return (FALSE); #endif ! #if defined(__alpha__) || defined(__mc68000__) || defined(__powerpc__) || defined(__sparc__) || defined(__mips__) #else #ifdef __GNUC__ #if defined(__ia64__) *************** *** 434,440 **** asm("cli"); #endif #endif ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) if (!ExtendedEnabled) iopl(0); #endif --- 434,440 ---- asm("cli"); #endif #endif ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) && !defined(__mips__) if (!ExtendedEnabled) iopl(0); #endif *************** *** 445,455 **** xf86EnableInterrupts() { if (!ExtendedEnabled) ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) if (iopl(3)) return; #endif ! #if defined(__alpha__) || defined(__mc68000__) || defined(__powerpc__) || defined(__sparc__) #else #ifdef __GNUC__ #if defined(__ia64__) --- 445,455 ---- xf86EnableInterrupts() { if (!ExtendedEnabled) ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) && !defined(__mips__) if (iopl(3)) return; #endif ! #if defined(__alpha__) || defined(__mc68000__) || defined(__powerpc__) || defined(__sparc__) || defined(__mips__) #else #ifdef __GNUC__ #if defined(__ia64__) *************** *** 461,467 **** asm("sti"); #endif #endif ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) if (!ExtendedEnabled) iopl(0); --- 461,467 ---- asm("sti"); #endif #endif ! #if !defined(__mc68000__) && !defined(__powerpc__) && !defined(__sparc__) && !defined(__mips__) if (!ExtendedEnabled) iopl(0); --ZPt4rx8FFjLCG7dd-- From owner-linux-mips@oss.sgi.com Fri Jun 23 10:22:00 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:21:51 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:47722 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:21:29 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA25098 for ; Fri, 23 Jun 2000 10:16:27 -0700 (PDT) mail_from (kei@sm.sony.co.jp) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA36769 for ; Fri, 23 Jun 2000 10:20:54 -0700 (PDT) mail_from (kei@sm.sony.co.jp) Received: from ns4.sony.co.jp (ns4.Sony.CO.JP [202.238.80.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA00306 for ; Fri, 23 Jun 2000 10:20:52 -0700 (PDT) mail_from (kei@sm.sony.co.jp) Received: from mail2.sony.co.jp (gatekeeper7.Sony.CO.JP [202.238.80.21]) by ns4.sony.co.jp (R8) with ESMTP id CAA90960; Sat, 24 Jun 2000 02:21:06 +0900 (JST) Received: from smail1.sm.sony.co.jp (smail1.sm.sony.co.jp [43.11.253.1]) by mail2.sony.co.jp (R8) with ESMTP id CAA17594; Sat, 24 Jun 2000 02:21:06 +0900 (JST) Received: from email.sm.sony.co.jp (email.sm.sony.co.jp [43.11.253.2]) by smail1.sm.sony.co.jp (8.8.8/3.6W) with ESMTP id CAA01027; Sat, 24 Jun 2000 02:20:40 +0900 (JST) Received: from sm.sony.co.jp (kei@gaia.sm.sony.co.jp [43.11.132.48]) by email.sm.sony.co.jp (8.8.8/3.6W) with ESMTP id CAA07568; Sat, 24 Jun 2000 02:16:34 +0900 (JST) Message-Id: <200006231716.CAA07568@email.sm.sony.co.jp> To: "Bradley D. LaRonde" cc: "Hiroshi Kawashima" , "Guido Guenther" , linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Subject: Re: XFree 4.0.1 on mips, mipsel In-reply-to: Your message of Fri, 23 Jun 2000 13:08:16 -0400. <018701bfdd35$9f91a230$0701010a@ltc.com> Date: Sat, 24 Jun 2000 02:21:04 +0900 From: Hiroshi Kawashima Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > Brad, are your patches (around kdrive) already public ? > > It's desired... > > No, they are still in a state of flux. I'm hacking away at new issues, like > mixed-endan frame buffer support. Some if it is really hacked at this > point. Ok, thanks for your good job, I will wait public release. ---- Kawashima From owner-linux-mips@oss.sgi.com Fri Jun 23 10:45:50 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:45:40 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:35181 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:45:23 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id KAA03853 for ; Fri, 23 Jun 2000 10:50:36 -0700 (PDT) mail_from (brad@ltc.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA42399 for ; Fri, 23 Jun 2000 10:44:51 -0700 (PDT) mail_from (brad@ltc.com) Received: from ltc.com (ltc.ltc.com [38.149.17.171]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via SMTP id KAA03645 for ; Fri, 23 Jun 2000 10:44:42 -0700 (PDT) mail_from (brad@ltc.com) Received: from gw1.ltc.com (gw1.ltc.com [38.149.17.163]) by ltc.com (NTMail 3.03.0017/1.afdd) with ESMTP id pa313315 for ; Fri, 23 Jun 2000 13:48:57 -0400 Message-ID: <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> From: "Bradley D. LaRonde" To: "Guido Guenther" Cc: "linux-mips" , "linux" References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> Subject: Re: XFree 4.0.1 on mips, mipsel Date: Fri, 23 Jun 2000 13:46:39 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Cool, thank you. It looks like they won't break anything for me. :-) Except I did see that one place where you hard-coded gcc. I cross-compile, but maybe that's OK anyway. I will test on 4.0 CVS eventually and find out. :-) Regards, Brad ----- Original Message ----- From: "Guido Guenther" To: "Bradley D. LaRonde" Cc: "linux-mips" ; "linux" Sent: Friday, June 23, 2000 1:07 PM Subject: Re: XFree 4.0.1 on mips, mipsel > On Fri, Jun 23, 2000 at 01:09:03PM -0400, Bradley D. LaRonde wrote: > [..snip..] > > May I have a copy of those patches for review? > They look basically like this(Imake.cf additionally checks for mipsel): > > -- > GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc > From owner-linux-mips@oss.sgi.com Fri Jun 23 10:55:50 2000 Received: by oss.sgi.com id ; Fri, 23 Jun 2000 10:55:41 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:895 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 23 Jun 2000 10:55:20 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id KAA00886 for ; Fri, 23 Jun 2000 10:50:23 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id KAA04943 for ; Fri, 23 Jun 2000 10:53:34 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id KAA51856 for ; Fri, 23 Jun 2000 10:51:45 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id KAA02262 for ; Fri, 23 Jun 2000 10:51:34 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from bert.physik.uni-konstanz.de [134.34.144.20] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 135Xby-0004ky-00; Fri, 23 Jun 2000 19:51:26 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Fri, 23 Jun 2000 19:45:10 +0200 Date: Fri, 23 Jun 2000 19:45:10 +0200 From: Guido Guenther To: "Bradley D. LaRonde" Cc: linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel Message-ID: <20000623194510.A17791@bert.physik.uni-konstanz.de> Mail-Followup-To: Guido Guenther , "Bradley D. LaRonde" , linux-mips , linux References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i In-Reply-To: <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com>; from brad@ltc.com on Fri, Jun 23, 2000 at 01:46:39PM -0400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Jun 23, 2000 at 01:46:39PM -0400, Bradley D. LaRonde wrote: > Cool, thank you. > > It looks like they won't break anything for me. :-) > > Except I did see that one place where you hard-coded gcc. I cross-compile, > but maybe that's OK anyway. I will test on 4.0 CVS eventually and find out. > :-) The #define AsCmd gcc -c -x assemble-with-cpp was the only that caused me trouble when crosscompiling. A patch for this is underway. -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Sat Jun 24 02:18:37 2000 Received: by oss.sgi.com id ; Sat, 24 Jun 2000 02:18:27 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:38187 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 24 Jun 2000 02:18:01 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id CAA04494 for ; Sat, 24 Jun 2000 02:23:15 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id CAA20954 for ; Sat, 24 Jun 2000 02:17:31 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA59632 for ; Sat, 24 Jun 2000 02:15:43 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t111.niisi.ras.ru (t111.niisi.ras.ru [193.232.173.111]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA06634 for ; Sat, 24 Jun 2000 02:15:40 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t06.niisi.ras.ru (t06.niisi.ras.ru [193.232.173.6]) by t111.niisi.ras.ru (8.9.1/8.9.1) with ESMTP id NAA26688; Sat, 24 Jun 2000 13:15:59 +0400 Received: (from uucp@localhost) by t06.niisi.ras.ru (8.7.6/8.7.3) with UUCP id NAA28539; Sat, 24 Jun 2000 13:03:35 +0400 Received: from niisi.msk.ru (t34 [193.232.173.34]) by niisi.msk.ru (8.8.8/8.8.8) with ESMTP id NAA16716; Sat, 24 Jun 2000 13:10:26 +0400 (MSD) Message-ID: <39547DB3.4FF35339@niisi.msk.ru> Date: Sat, 24 Jun 2000 13:21:55 +0400 From: "Gleb O. Raiko" Organization: NIISI RAN X-Mailer: Mozilla 4.72 [en] (WinNT; I) X-Accept-Language: en,ru MIME-Version: 1.0 To: "Bradley D. LaRonde" CC: Guido Guenther , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Bradley D. LaRonde" wrote: > > Cool, thank you. > > It looks like they won't break anything for me. :-) > > Except I did see that one place where you hard-coded gcc. I cross-compile, > but maybe that's OK anyway. If you cross-compile, you just redefine most of the stuff like CcCmd, ArCmd, etc, anyway. Regards, Gleb. From owner-linux-mips@oss.sgi.com Sat Jun 24 04:13:27 2000 Received: by oss.sgi.com id ; Sat, 24 Jun 2000 04:13:16 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:10031 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 24 Jun 2000 04:12:55 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id EAA06580 for ; Sat, 24 Jun 2000 04:18:07 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id EAA79317 for ; Sat, 24 Jun 2000 04:12:22 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id EAA05838 for ; Sat, 24 Jun 2000 04:12:20 -0700 (PDT) mail_from (agx@gandalf.physik.uni-konstanz.de) Received: from bilbo.physik.uni-konstanz.de [134.34.144.31] by gandalf.physik.uni-konstanz.de with esmtp (Exim 2.05 #1 (Debian)) id 135nrG-0000zA-00; Sat, 24 Jun 2000 13:12:18 +0200 Received: from agx by bilbo.physik.uni-konstanz.de with local (Exim 2.05 #1 (Debian)) id 135nrG-0004ZX-00; Sat, 24 Jun 2000 13:12:18 +0200 Date: Sat, 24 Jun 2000 13:12:18 +0200 From: Guido Guenther To: "Gleb O. Raiko" Cc: "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel Message-ID: <20000624131218.A17554@bilbo.physik.uni-konstanz.de> Mail-Followup-To: "Gleb O. Raiko" , "Bradley D. LaRonde" , linux-mips , linux References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii User-Agent: Mutt/1.0i In-Reply-To: <39547DB3.4FF35339@niisi.msk.ru>; from raiko@niisi.msk.ru on Sat, Jun 24, 2000 at 01:21:55PM +0400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Jun 24, 2000 at 01:21:55PM +0400, Gleb O. Raiko wrote: [..snip..] > If you cross-compile, you just redefine most of the stuff like CcCmd, > ArCmd, etc, anyway. Yes, but you have to make sure the redefinitions don't get redefined again, therefore IMHO an "#ifdef AsCmd" is needed. Otherwise the definition in hosts.def will be overriden by the one in linux.cf. Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Sat Jun 24 15:16:20 2000 Received: by oss.sgi.com id ; Sat, 24 Jun 2000 15:16:11 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:17006 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 24 Jun 2000 15:15:41 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id PAA10305 for ; Sat, 24 Jun 2000 15:10:13 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id PAA85464 for ; Sat, 24 Jun 2000 15:14:40 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id PAA02427 for ; Sat, 24 Jun 2000 15:12:53 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: from u-150.karlsruhe.ipdial.viaginterkom.de (u-150.karlsruhe.ipdial.viaginterkom.de [62.180.19.150]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id PAA01424 for ; Sat, 24 Jun 2000 15:12:50 -0700 (PDT) mail_from (ralf@oss.sgi.com) Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 25 Jun 2000 00:12:55 +0200 Date: Sun, 25 Jun 2000 00:12:55 +0200 From: Ralf Baechle To: "Gleb O. Raiko" , "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel Message-ID: <20000625001255.C894@bacchus.dhis.org> References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> <20000624131218.A17554@bilbo.physik.uni-konstanz.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <20000624131218.A17554@bilbo.physik.uni-konstanz.de>; from guido.guenther@gmx.net on Sat, Jun 24, 2000 at 01:12:18PM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sat, Jun 24, 2000 at 01:12:18PM +0200, Guido Guenther wrote: > [..snip..] > > If you cross-compile, you just redefine most of the stuff like CcCmd, > > ArCmd, etc, anyway. > Yes, but you have to make sure the redefinitions don't get redefined > again, therefore IMHO an "#ifdef AsCmd" is needed. Otherwise the > definition in hosts.def will be overriden by the one in linux.cf. Does X building ever need the hostcompiler? If not, then you can easily do crossbuilds like: PATH=//bin:$PATH make ... Ralf From owner-linux-mips@oss.sgi.com Sat Jun 24 18:46:11 2000 Received: by oss.sgi.com id ; Sat, 24 Jun 2000 18:46:02 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:34372 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Sat, 24 Jun 2000 18:45:31 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id SAA05525 for ; Sat, 24 Jun 2000 18:50:14 -0700 (PDT) mail_from (newsletter@IPMailStop.com) From: newsletter@IPMailStop.com Received: from deliverator.sgi.com (deliverator.sgi.com [150.166.91.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA43862; Sat, 24 Jun 2000 18:44:30 -0700 (PDT) mail_from (newsletter@IPMailStop.com) Received: from www.IPMailStop.com ([192.216.54.83]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id SAA24507; Sat, 24 Jun 2000 18:39:44 -0700 (PDT) mail_from (newsletter@IPMailStop.com) Subject: ADV: Free Investment Newsletter Date: Sat, 24 Jun 2000 17:09:59 Message-Id: <667.425812.581765@www.IPMailStop.com> To: unlisted-recipients:; (no To-header on input) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, to be removed from our mailing list please visit http://www.stockmarketletter.com/remove.html This a invitation to join our Free Investment Newsletter. In today's fast moving markets you timely information to make informed decisions. Visit http://www.stockmarketletter.com for your Free Subscription. The Information You Want, When You Want It And it's FREE! We think you will find our newsletter to be your most important research tool. They are e-mailed to subscribers prior to publication on our web site. Our newsletters feature in-depth company profiles, breaking financial news, links to free delayed stock quotes and company news releases and educational articles prior to general publication. We are here to help you identify and track prospering companies. Breaking News. We e-mail you information related to the companies we are tracking. Through interviews with the people in charge, you will get the information and clarification you need. Fast Information Flow. We deal directly with public companies over the internet -- eliminating the delay of traditional information gathering. Background Information. By monitoring message boards and chat rooms we keep track of what investors are interested in. We address everything from changes in regulations, of interest to experienced investors, to the background and educational information new investors need about the numerous exchanges and listings. The Stock Market Letter is a privately held company specializing in distribution of information about publicly traded companies. Our objective is to identify and track investment opportunities for our subscribers. Once again, visit http://www.stockmarketletter.com for your Free Subscription. From owner-linux-mips@oss.sgi.com Sat Jun 24 19:17:12 2000 Received: by oss.sgi.com id ; Sat, 24 Jun 2000 19:17:02 -0700 Received: from mail0.mco.bellsouth.net ([205.152.111.12]:9426 "EHLO mail0.mco.bellsouth.net") by oss.sgi.com with ESMTP id ; Sat, 24 Jun 2000 19:16:33 -0700 Received: from bellsouth.net (host-209-214-104-86.bhm.bellsouth.net [209.214.104.86]) by mail0.mco.bellsouth.net (3.3.5alt/0.75.2) with ESMTP id WAA06989 for ; Sat, 24 Jun 2000 22:16:02 -0400 (EDT) Message-ID: <39556B68.5DCDD3B2@bellsouth.net> Date: Sun, 25 Jun 2000 02:16:08 +0000 From: dave X-Mailer: Mozilla 4.61 [en] (X11; I; Linux 2.2.13-7mdksmp i686) X-Accept-Language: en MIME-Version: 1.0 To: "linux-mips@oss.sgi.com" Subject: disk boot Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, Can any one tell me what files and where I might possibly download a Linux/MIPS kernel that I could try booting from my floptical on Indy? Should I try the HardHat distro or is there something better? Has anyone else tried this and if so, am I peeing in the wind? Realizing I'm fairly new at SGI/Irix stuff, is there anything I can do to help? BTW I can't program my VCR if that tells you anything. Thanks for everyones' time on this. Sincerely, Dave Keen From owner-linux-mips@oss.sgi.com Sun Jun 25 11:44:59 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 11:44:49 -0700 Received: from u-202.karlsruhe.ipdial.viaginterkom.de ([62.180.10.202]:17156 "EHLO u-202.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 11:44:27 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 25 Jun 2000 20:43:34 +0200 Date: Sun, 25 Jun 2000 20:43:34 +0200 From: Ralf Baechle To: Andreas Jaeger Cc: Mike Klar , linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: errno assignment in _syscall macros and glibc Message-ID: <20000625204334.E1572@bacchus.dhis.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from aj@suse.de on Sun, Jun 25, 2000 at 11:26:33AM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Jun 25, 2000 at 11:26:33AM +0200, Andreas Jaeger wrote: > The question remains what we should do with glibc 2.2. Currently > includes and this makes _syscall0 and > friends available to userspace. > > I couldn't find any reference to in the ABI and > consider dropping the include of since it's not needed > at all. > > Any objections or better suggestions? I will take his report as a real bug but for another reason. The kernel has a global variable errno which at least on i386 get the returned error value. Fixing this one will magically fix userland. Still everybody should be aware that using your own syscall wrappers can be _very_ dangerous. I saw an attempt to use pread / pwrite which was ok on Intel but might have corrupted data on MIPS due to different calling conventions. You have been warned. Andreas - I think the syscall interface should finally officially be declared a private interface between libc and the kernel, that is nobody except these two should use it. Many of the other attempts to use it have been quite problematic - portabilitywise and worse. Ralf From owner-linux-mips@oss.sgi.com Sun Jun 25 11:55:29 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 11:55:19 -0700 Received: from Cantor.suse.de ([194.112.123.193]:19468 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Sun, 25 Jun 2000 11:55:06 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 892951E0F8; Sun, 25 Jun 2000 20:54:35 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id E62D310A109; Sun, 25 Jun 2000 20:54:33 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 136HXA-0002aq-00; Sun, 25 Jun 2000 20:53:32 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id 96D8D1821; Sun, 25 Jun 2000 20:53:30 +0200 (CEST) To: Ralf Baechle Cc: Mike Klar , linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: errno assignment in _syscall macros and glibc References: <20000625204334.E1572@bacchus.dhis.org> From: Andreas Jaeger Date: 25 Jun 2000 20:53:30 +0200 In-Reply-To: Ralf Baechle's message of "Sun, 25 Jun 2000 20:43:34 +0200" Message-ID: Lines: 66 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> Ralf Baechle writes: Ralf> On Sun, Jun 25, 2000 at 11:26:33AM +0200, Andreas Jaeger wrote: >> The question remains what we should do with glibc 2.2. Currently >> includes and this makes _syscall0 and >> friends available to userspace. >> >> I couldn't find any reference to in the ABI and >> consider dropping the include of since it's not needed >> at all. >> >> Any objections or better suggestions? Ralf> I will take his report as a real bug but for another reason. The kernel Ralf> has a global variable errno which at least on i386 get the returned Ralf> error value. Fixing this one will magically fix userland. Ralf> Still everybody should be aware that using your own syscall wrappers Ralf> can be _very_ dangerous. I saw an attempt to use pread / pwrite which Ralf> was ok on Intel but might have corrupted data on MIPS due to different Ralf> calling conventions. You have been warned. Ralf> Andreas - I think the syscall interface should finally officially be Ralf> declared a private interface between libc and the kernel, that is nobody Ralf> except these two should use it. Many of the other attempts to use it Ralf> have been quite problematic - portabilitywise and worse. I'm considering to commit the appended patch. I've compiled glibc with it and didn't notice any problems. If nobody objects, I'll apply it tomorrow. Ralf, are there any other places that needs to be changed? What do you think of adding #ifdef KERNEL around _syscallX in ? Andreas 2000-06-25 Andreas Jaeger * sysdeps/unix/sysv/linux/mips/sys/syscall.h: Don't include - we don't need any of these at all in glibc or user programs. ============================================================ Index: sysdeps/unix/sysv/linux/mips/sys/syscall.h --- sysdeps/unix/sysv/linux/mips/sys/syscall.h 2000/06/23 07:55:36 1.4 +++ sysdeps/unix/sysv/linux/mips/sys/syscall.h 2000/06/25 18:51:00 @@ -19,11 +19,6 @@ #ifndef _SYSCALL_H #define _SYSCALL_H 1 -/* This file should list the numbers of the system the system knows. - But instead of duplicating this we use the information available - from the kernel sources. */ -#include - /* * SVR4 syscalls are in the range from 1 to 999 */ -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Sun Jun 25 12:31:49 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 12:31:40 -0700 Received: from lightning.swansea.uk.linux.org ([194.168.151.1]:35424 "EHLO the-village.bc.nu") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 12:31:10 -0700 Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 136I3I-0002yR-00; Sun, 25 Jun 2000 20:26:44 +0100 Subject: Re: errno assignment in _syscall macros and glibc To: ralf@uni-koblenz.de (Ralf Baechle) Date: Sun, 25 Jun 2000 20:26:42 +0100 (BST) Cc: aj@suse.de (Andreas Jaeger), mfklar@ponymail.com (Mike Klar), linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu In-Reply-To: <20000625204334.E1572@bacchus.dhis.org> from "Ralf Baechle" at Jun 25, 2000 08:43:34 PM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Andreas - I think the syscall interface should finally officially be > declared a private interface between libc and the kernel, that is nobody > except these two should use it. Many of the other attempts to use it > have been quite problematic - portabilitywise and worse. Don't make it too private. glibc is still worryingly large for some embedded applications. Between a libc and the kernel yes, between glibc and the kernel no. Alan From owner-linux-mips@oss.sgi.com Sun Jun 25 14:23:09 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 14:22:59 -0700 Received: from u-217.frankfurt3.ipdial.viaginterkom.de ([62.180.18.217]:22532 "EHLO u-217.frankfurt3.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 14:22:19 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 25 Jun 2000 23:21:39 +0200 Date: Sun, 25 Jun 2000 23:21:39 +0200 From: Ralf Baechle To: Alan Cox Cc: Andreas Jaeger , Mike Klar , linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: errno assignment in _syscall macros and glibc Message-ID: <20000625232138.A3802@bacchus.dhis.org> References: <20000625204334.E1572@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from alan@lxorguk.ukuu.org.uk on Sun, Jun 25, 2000 at 08:26:42PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Jun 25, 2000 at 08:26:42PM +0100, Alan Cox wrote: > > Andreas - I think the syscall interface should finally officially be > > declared a private interface between libc and the kernel, that is nobody > > except these two should use it. Many of the other attempts to use it > > have been quite problematic - portabilitywise and worse. > > Don't make it too private. glibc is still worryingly large for some embedded > applications. Between a libc and the kernel yes, between glibc and the kernel > no. Sure; these days glibc is more or less synonym with libc and I was using it in that sense. What small, portable libcs do we have available anyway? Some mipers will want one. Ralf From owner-linux-mips@oss.sgi.com Sun Jun 25 14:30:29 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 14:30:19 -0700 Received: from lightning.swansea.uk.linux.org ([194.168.151.1]:10082 "EHLO the-village.bc.nu") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 14:29:57 -0700 Received: from alan by the-village.bc.nu with local (Exim 2.12 #1) id 136JuZ-0003C0-00; Sun, 25 Jun 2000 22:25:51 +0100 Subject: Re: errno assignment in _syscall macros and glibc To: ralf@oss.sgi.com (Ralf Baechle) Date: Sun, 25 Jun 2000 22:25:48 +0100 (BST) Cc: alan@lxorguk.ukuu.org.uk (Alan Cox), aj@suse.de (Andreas Jaeger), mfklar@ponymail.com (Mike Klar), linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu In-Reply-To: <20000625232138.A3802@bacchus.dhis.org> from "Ralf Baechle" at Jun 25, 2000 11:21:39 PM X-Mailer: ELM [version 2.5 PL1] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-Id: From: Alan Cox Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Sure; these days glibc is more or less synonym with libc and I was using > it in that sense. > > What small, portable libcs do we have available anyway? Some mipers will > want one. I've been playing with the Linux8086 libc which is tiny but not portable when Prumpf pointed out that Cygnus newlib is designed for precisely this job. Its about 250K MIPS32 (my PDA has mips32/mips64 but not mips16 - duh!!) Alan From owner-linux-mips@oss.sgi.com Sun Jun 25 14:39:30 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 14:39:10 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:36922 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 14:38:49 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id OAA03496; Sun, 25 Jun 2000 14:33:21 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id OAA10715; Sun, 25 Jun 2000 14:36:34 -0700 (PDT) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id OAA27047; Sun, 25 Jun 2000 14:34:46 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: by calypso.engr.sgi.com (Postfix, from userid 37984) id 634AEA7875; Sun, 25 Jun 2000 14:33:50 -0700 (PDT) From: Ulf Carlsson MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14678.31422.353864.773880@calypso.engr.sgi.com> Date: Sun, 25 Jun 2000 14:33:50 -0700 (PDT) To: Ralf Baechle Cc: "Gleb O. Raiko" , "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel In-Reply-To: <20000625001255.C894@bacchus.dhis.org> References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> <20000624131218.A17554@bilbo.physik.uni-konstanz.de> <20000625001255.C894@bacchus.dhis.org> X-Mailer: VM 6.75 under Emacs 20.5.1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle writes: > On Sat, Jun 24, 2000 at 01:12:18PM +0200, Guido Guenther wrote: > > > [..snip..] > > > If you cross-compile, you just redefine most of the stuff like CcCmd, > > > ArCmd, etc, anyway. > > Yes, but you have to make sure the redefinitions don't get redefined > > again, therefore IMHO an "#ifdef AsCmd" is needed. Otherwise the > > definition in hosts.def will be overriden by the one in linux.cf. > > Does X building ever need the hostcompiler? If not, then you can easily > do crossbuilds like: > > PATH=//bin:$PATH make ... Yes. You need the hostcompiler when you do X builds. It is possible to get around it though. I have the commands that I used in two shell scripts. First I have to to prepare for the cross build: #!/bin/sh make clean make Makefile.boot make Makefiles (cd config; make) make includes make depend (cd fonts/bdf; for i in $(find -name 'Makefile'); do sed -e 's/\$(XBUILDBINDIR)\///' < $i > $i.tmp; mv $i.tmp $i; done) Then I'm ready to build the rest with the cross compiler: #!/bin/sh export PATH=/usr/glibc-mips/bin:$PATH make -k CC=mips-linux-gcc LD=mips-linux-ld AS=mips-linux-as RANLIB=mips-linux-ranlib $@ You probably have a better solution though :-) Ulf From owner-linux-mips@oss.sgi.com Sun Jun 25 14:50:00 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 14:49:41 -0700 Received: from u-217.frankfurt3.ipdial.viaginterkom.de ([62.180.18.217]:24068 "EHLO u-217.frankfurt3.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 14:49:19 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 25 Jun 2000 23:48:33 +0200 Date: Sun, 25 Jun 2000 23:48:33 +0200 From: Ralf Baechle To: Alan Cox Cc: Andreas Jaeger , Mike Klar , linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: errno assignment in _syscall macros and glibc Message-ID: <20000625234833.B3802@bacchus.dhis.org> References: <20000625232138.A3802@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from alan@lxorguk.ukuu.org.uk on Sun, Jun 25, 2000 at 10:25:48PM +0100 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Jun 25, 2000 at 10:25:48PM +0100, Alan Cox wrote: > > Sure; these days glibc is more or less synonym with libc and I was using > > it in that sense. > > > > What small, portable libcs do we have available anyway? Some mipers will > > want one. > > I've been playing with the Linux8086 libc which is tiny but not portable when > Prumpf pointed out that Cygnus newlib is designed for precisely this job. Its > about 250K MIPS32 (my PDA has mips32/mips64 but not mips16 - duh!!) Oh promised lands of small happy libcs :-) Back to the original problem - the i386 __syscall_return macro which is used by the _syscallX macros set the errno variable - even inside the kernel. In the age of SMP this looks broken - at least nothing seems to rely on it. So how about removing the whole errno thing from there? Ralf From owner-linux-mips@oss.sgi.com Sun Jun 25 15:00:40 2000 Received: by oss.sgi.com id ; Sun, 25 Jun 2000 15:00:31 -0700 Received: from u-217.frankfurt3.ipdial.viaginterkom.de ([62.180.18.217]:25348 "EHLO u-217.frankfurt3.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Sun, 25 Jun 2000 14:59:59 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Sun, 25 Jun 2000 23:59:17 +0200 Date: Sun, 25 Jun 2000 23:59:17 +0200 From: Ralf Baechle To: Andreas Jaeger Cc: Mike Klar , linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: errno assignment in _syscall macros and glibc Message-ID: <20000625235917.C3802@bacchus.dhis.org> References: <20000625204334.E1572@bacchus.dhis.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: ; from aj@suse.de on Sun, Jun 25, 2000 at 08:53:30PM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Sun, Jun 25, 2000 at 08:53:30PM +0200, Andreas Jaeger wrote: > I'm considering to commit the appended patch. I've compiled glibc > with it and didn't notice any problems. If nobody objects, I'll apply > it tomorrow. > > Ralf, are there any other places that needs to be changed? libc/sysdeps/unix/sysv/linux/sys/syscall.h should be patched the same way. I remember that I once saw a program the __NR_ syscall numbers imported via unistd.h. Fixing won't be a big deal. > What do you think of adding > #ifdef KERNEL > around _syscallX in ? __KERNEL__ that is ... Slightly radical but I like it. It'll break some programs which are using the _syscallX() macros to get syscalls which libc doesn't yet have wrappers for just to get away without fixing / upgrading libc. Those people still can use syscall(3) in such a case. Ralf From owner-linux-mips@oss.sgi.com Tue Jun 27 00:54:22 2000 Received: by oss.sgi.com id ; Tue, 27 Jun 2000 00:54:02 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:46087 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 27 Jun 2000 00:53:58 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id AAA05096 for ; Tue, 27 Jun 2000 00:59:13 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id AAA10545 for ; Tue, 27 Jun 2000 00:53:27 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA48970 for ; Tue, 27 Jun 2000 00:51:34 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t111.niisi.ras.ru (t111.niisi.ras.ru [193.232.173.111]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA04025 for ; Tue, 27 Jun 2000 00:51:24 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t06.niisi.ras.ru (t06.niisi.ras.ru [193.232.173.6]) by t111.niisi.ras.ru (8.9.1/8.9.1) with ESMTP id LAA17652; Tue, 27 Jun 2000 11:51:36 +0400 Received: (from uucp@localhost) by t06.niisi.ras.ru (8.7.6/8.7.3) with UUCP id LAA14615; Tue, 27 Jun 2000 11:35:57 +0400 Received: from niisi.msk.ru (t34 [193.232.173.34]) by niisi.msk.ru (8.8.8/8.8.8) with ESMTP id LAA13938; Tue, 27 Jun 2000 11:46:06 +0400 (MSD) Message-ID: <39585E84.3E75C76A@niisi.msk.ru> Date: Tue, 27 Jun 2000 11:57:56 +0400 From: "Gleb O. Raiko" Organization: NIISI RAN X-Mailer: Mozilla 4.72 [en] (WinNT; I) X-Accept-Language: en,ru MIME-Version: 1.0 To: Ralf Baechle CC: "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> <20000624131218.A17554@bilbo.physik.uni-konstanz.de> <20000625001255.C894@bacchus.dhis.org> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Ralf Baechle wrote: > > On Sat, Jun 24, 2000 at 01:12:18PM +0200, Guido Guenther wrote: > > > [..snip..] > > > If you cross-compile, you just redefine most of the stuff like CcCmd, > > > ArCmd, etc, anyway. > > Yes, but you have to make sure the redefinitions don't get redefined > > again, therefore IMHO an "#ifdef AsCmd" is needed. Otherwise the > > definition in hosts.def will be overriden by the one in linux.cf. > > Does X building ever need the hostcompiler? This depends on your taste basically. If you want 'clean' build w/o stupid errors, you should define CROSS_COMPILE and other macros to be used diring cross compilation. After that, X understands there are hostcompiler and crosscompiler. Then, makedepend & Co are compiled by hostcompiler and X server itself are compiler by cross compiler. In principle, you may safely ignore all that stuff and be ready to build makedep & Co manually. Regards, Gleb. From owner-linux-mips@oss.sgi.com Tue Jun 27 00:59:22 2000 Received: by oss.sgi.com id ; Tue, 27 Jun 2000 00:59:02 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:8 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 27 Jun 2000 00:58:51 -0700 Received: from nodin.corp.sgi.com (nodin.corp.sgi.com [192.26.51.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id BAA08086 for ; Tue, 27 Jun 2000 01:04:07 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id AAA15319 for ; Tue, 27 Jun 2000 00:58:20 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA85887; Tue, 27 Jun 2000 00:56:32 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t111.niisi.ras.ru (t111.niisi.ras.ru [193.232.173.111]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA01502; Tue, 27 Jun 2000 00:56:29 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t06.niisi.ras.ru (t06.niisi.ras.ru [193.232.173.6]) by t111.niisi.ras.ru (8.9.1/8.9.1) with ESMTP id LAA17683; Tue, 27 Jun 2000 11:56:36 +0400 Received: (from uucp@localhost) by t06.niisi.ras.ru (8.7.6/8.7.3) with UUCP id LAA14653; Tue, 27 Jun 2000 11:39:04 +0400 Received: from niisi.msk.ru (t34 [193.232.173.34]) by niisi.msk.ru (8.8.8/8.8.8) with ESMTP id LAA13973; Tue, 27 Jun 2000 11:49:16 +0400 (MSD) Message-ID: <39585F40.67B6FA74@niisi.msk.ru> Date: Tue, 27 Jun 2000 12:01:04 +0400 From: "Gleb O. Raiko" Organization: NIISI RAN X-Mailer: Mozilla 4.72 [en] (WinNT; I) X-Accept-Language: en,ru MIME-Version: 1.0 To: Ulf Carlsson CC: Ralf Baechle , "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> <20000624131218.A17554@bilbo.physik.uni-konstanz.de> <20000625001255.C894@bacchus.dhis.org> <14678.31422.353864.773880@calypso.engr.sgi.com> Content-Type: multipart/mixed; boundary="------------48626968E62A39AA49D3BEE9" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is a multi-part message in MIME format. --------------48626968E62A39AA49D3BEE9 Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Ulf Carlsson wrote: > > Ralf Baechle writes: > > On Sat, Jun 24, 2000 at 01:12:18PM +0200, Guido Guenther wrote: > > > > > [..snip..] > > > > If you cross-compile, you just redefine most of the stuff like CcCmd, > > > > ArCmd, etc, anyway. > > > Yes, but you have to make sure the redefinitions don't get redefined > > > again, therefore IMHO an "#ifdef AsCmd" is needed. Otherwise the > > > definition in hosts.def will be overriden by the one in linux.cf. > > > > Does X building ever need the hostcompiler? If not, then you can easily > > do crossbuilds like: > > > > PATH=//bin:$PATH make ... > > Yes. You need the hostcompiler when you do X builds. It is possible > to get around it though. I have the commands that I used in two shell > scripts. > > First I have to to prepare for the cross build: > > #!/bin/sh > make clean > make Makefile.boot > make Makefiles > (cd config; make) > make includes > make depend > (cd fonts/bdf; for i in $(find -name 'Makefile'); do sed -e 's/\$(XBUILDBINDIR)\///' < $i > $i.tmp; mv $i.tmp $i; done) > > Then I'm ready to build the rest with the cross compiler: > > #!/bin/sh > export PATH=/usr/glibc-mips/bin:$PATH > make -k CC=mips-linux-gcc LD=mips-linux-ld AS=mips-linux-as RANLIB=mips-linux-ranlib $@ > > You probably have a better solution though :-) Sure, host.def attached. --------------48626968E62A39AA49D3BEE9 Content-Type: image/x-xbitmap; name="host.def" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="host.def" #define BuildServersOnly YES /* #define DoLoadableServer NO */ #define XprtServer NO #define XVirtualFramebufferServer NO #define XnestServer NO #define BuildFontServer NO #define BuildFonts NO #define BuildScreenSaverExt NO /* #define BuildXF86MiscExt YES */ #define MipsArchitecture #define __mips #undef i386Architecture #define OSName Linux 2.2.1 mips [ELF] #define OSMajorVersion 2 #define OSMinorVersion 2 #define OSTeenyVersion 1 #define LinuxCLibMajorVersion 6 #define LinuxCLibMinorVersion 0 #define LinuxCLibTeenyVersion 6 #define LinuxBinUtilsMajorVersion 28 #define CcCmd mips-linux-gcc -g #define AsCmd mips-linux-gcc -c -x assembler-with-cpp -g #define LdCmd mips-linux-ld -g #define ArCmdBase mips-linux-ar #define RanlibCmd mips-linux-ranlib #define CrossCompiling YES #define ComplexHostProgramTarget(program) @@\ CC=cc @@\ STD_INCLUDES= @@\ CFLAGS=$(TOP_INCLUDES) $(INCLUDES) $(BOOTSTRAPCFLAGS) @@\ EXTRA_LOAD_FLAGS= @@\ PROGRAM = program @@\ @@\ AllTarget(program) @@\ @@\ program: $(OBJS) $(DEPLIBS) @@\ RemoveTargetProgram($@) @@\ HostLinkRule($@,$(_NOOP_),$(OBJS),$(DEPLIBS) $(LOCAL_LIBRARIES)) @@\ @@\ DependTarget() @@\ @@\ LintTarget() @@\ @@\ clean:: @@\ RemoveFile(ProgramTargetName(program)) #define SimpleHostProgramTarget(program) @@\ OBJS = program.o @@\ SRCS = program.c @@\ @@\ ComplexHostProgramTarget(program) #define HostLinkRule(target, flags, src, libs) gcc -o target flags src libs $(EXTRA_LOAD_FLAGS) --------------48626968E62A39AA49D3BEE9-- From owner-linux-mips@oss.sgi.com Tue Jun 27 02:28:52 2000 Received: by oss.sgi.com id ; Tue, 27 Jun 2000 02:28:43 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:45836 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 27 Jun 2000 02:28:26 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id CAA02757 for ; Tue, 27 Jun 2000 02:33:42 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id CAA40247 for ; Tue, 27 Jun 2000 02:27:55 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id CAA84262 for ; Tue, 27 Jun 2000 02:26:02 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from gandalf.physik.uni-konstanz.de (gandalf.physik.uni-konstanz.de [134.34.144.30]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id CAA06001 for ; Tue, 27 Jun 2000 02:26:01 -0700 (PDT) mail_from (guido.guenther@gmx.net) Received: from bert.physik.uni-konstanz.de [134.34.144.20] by gandalf.physik.uni-konstanz.de with smtp (Exim 2.05 #1 (Debian)) id 136rcx-0004pJ-00; Tue, 27 Jun 2000 11:25:55 +0200 Received: by bert.physik.uni-konstanz.de (sSMTP sendmail emulation); Tue, 27 Jun 2000 11:17:28 +0200 Date: Tue, 27 Jun 2000 11:17:28 +0200 From: Guido Guenther To: "Gleb O. Raiko" Cc: Ralf Baechle , "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel Message-ID: <20000627111727.A2352@bert.physik.uni-konstanz.de> Mail-Followup-To: Guido Guenther , "Gleb O. Raiko" , Ralf Baechle , "Bradley D. LaRonde" , linux-mips , linux References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> <20000624131218.A17554@bilbo.physik.uni-konstanz.de> <20000625001255.C894@bacchus.dhis.org> <39585E84.3E75C76A@niisi.msk.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.1.9i In-Reply-To: <39585E84.3E75C76A@niisi.msk.ru>; from raiko@niisi.msk.ru on Tue, Jun 27, 2000 at 11:57:56AM +0400 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, Jun 27, 2000 at 11:57:56AM +0400, Gleb O. Raiko wrote: > > Does X building ever need the hostcompiler? > > This depends on your taste basically. If you want 'clean' build w/o > stupid errors, you should define CROSS_COMPILE and other macros to be > used diring cross compilation. After that, X understands there are > hostcompiler and crosscompiler. Then, makedepend & Co are compiled by > hostcompiler and X server itself are compiler by cross compiler. In > principle, you may safely ignore all that stuff and be ready to build > makedep & Co manually. "define CROSS_COMPILE" is not perfect yet. E.g. xkbcomp is compiled for target architecture(since it's needed there) but the build process also tries to execute it on the host, same for pswrap. Regards, -- Guido -- GPG-Public Key: http://honk.physik.uni-konstanz.de/~agx/guenther.gpg.asc From owner-linux-mips@oss.sgi.com Tue Jun 27 19:40:37 2000 Received: by oss.sgi.com id ; Tue, 27 Jun 2000 19:40:27 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:35867 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Tue, 27 Jun 2000 19:40:10 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id TAA08002 for ; Tue, 27 Jun 2000 19:35:18 -0700 (PDT) mail_from (jsun@mvista.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id TAA48503 for ; Tue, 27 Jun 2000 19:39:41 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id TAA00628 for ; Tue, 27 Jun 2000 19:39:34 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id TAA19535; Tue, 27 Jun 2000 19:39:46 -0700 Message-ID: <39596570.68939D9@mvista.com> Date: Tue, 27 Jun 2000 19:39:44 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr Subject: argument mismatch in prom_init() for DDB5074? Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I compiled an image for DDB5074. I got a TLB fault immediately after the control enters prom_init() function. A further probe shows that the caller are passing differents arguments to prom_init than what the callee expected. See code excerpt below. Does this mean the code of DDB5074 is outdated? In any case, can someone give me a hint on how to fix this? It does not look obvious at the first sight... ============= arch/mips/kernel/setup.c: init_arch(...) { unsigned int s; /* Determine which MIPS variant we are running on. */ cpu_probe(); prom_init(argc, argv, envp, prom_vec); ... } =========== arch/mips/ddb5074/prom.c: void __init prom_init(const char *s) { int i = 0; unsigned long mem_size, free_start, free_end, start_pfn, bootmap_size; // _serinit(); if (s != (void *)-1) while (*s && i < sizeof(arcs_cmdline)-1) arcs_cmdline[i++] = *s++; arcs_cmdline[i] = '\0'; ... Jun From owner-linux-mips@oss.sgi.com Wed Jun 28 00:18:18 2000 Received: by oss.sgi.com id ; Wed, 28 Jun 2000 00:17:59 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:29022 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 28 Jun 2000 00:17:42 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id AAA27796 for ; Wed, 28 Jun 2000 00:12:49 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA72659 for ; Wed, 28 Jun 2000 00:17:09 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t111.niisi.ras.ru (t111.niisi.ras.ru [193.232.173.111]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA07258 for ; Wed, 28 Jun 2000 00:16:59 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t06.niisi.ras.ru (t06.niisi.ras.ru [193.232.173.6]) by t111.niisi.ras.ru (8.9.1/8.9.1) with ESMTP id LAA26568; Wed, 28 Jun 2000 11:16:19 +0400 Received: (from uucp@localhost) by t06.niisi.ras.ru (8.7.6/8.7.3) with UUCP id KAA32147; Wed, 28 Jun 2000 10:59:44 +0400 Received: from niisi.msk.ru (t34 [193.232.173.34]) by niisi.msk.ru (8.8.8/8.8.8) with ESMTP id LAA09607; Wed, 28 Jun 2000 11:09:06 +0400 (MSD) Message-ID: <3959A74F.44C97D23@niisi.msk.ru> Date: Wed, 28 Jun 2000 11:20:47 +0400 From: "Gleb O. Raiko" Organization: NIISI RAN X-Mailer: Mozilla 4.72 [en] (WinNT; I) X-Accept-Language: en,ru MIME-Version: 1.0 To: Guido Guenther CC: Ralf Baechle , "Bradley D. LaRonde" , linux-mips , linux Subject: Re: XFree 4.0.1 on mips, mipsel References: <20000623181736.A13410@bert.physik.uni-konstanz.de> <014f01bfdd33$8877b3c0$0701010a@ltc.com> <20000623185553.A20888@bert.physik.uni-konstanz.de> <019501bfdd35$bb301940$0701010a@ltc.com> <20000623190723.B20888@bert.physik.uni-konstanz.de> <01cb01bfdd3a$fc43b2c0$0701010a@ltc.com> <39547DB3.4FF35339@niisi.msk.ru> <20000624131218.A17554@bilbo.physik.uni-konstanz.de> <20000625001255.C894@bacchus.dhis.org> <39585E84.3E75C76A@niisi.msk.ru> <20000627111727.A2352@bert.physik.uni-konstanz.de> Content-Type: text/plain; charset=koi8-r Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Guido Guenther wrote: > > On Tue, Jun 27, 2000 at 11:57:56AM +0400, Gleb O. Raiko wrote: > "define CROSS_COMPILE" is not perfect yet. E.g. xkbcomp is compiled for > target architecture(since it's needed there) but the build process also tries > to execute it on the host, same for pswrap. I speak for X server only. The rest of XFree might be used from HardHat. Regards, Gleb. From owner-linux-mips@oss.sgi.com Wed Jun 28 00:37:39 2000 Received: by oss.sgi.com id ; Wed, 28 Jun 2000 00:37:28 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:17250 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 28 Jun 2000 00:37:05 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id AAA29006 for ; Wed, 28 Jun 2000 00:32:13 -0700 (PDT) mail_from (Harald.Koerfgen@home.ivm.de) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA12929 for ; Wed, 28 Jun 2000 00:36:13 -0700 (PDT) mail_from (Harald.Koerfgen@home.ivm.de) Received: from mail.ivm.net ([62.204.1.4]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA06673 for ; Wed, 28 Jun 2000 00:36:11 -0700 (PDT) mail_from (Harald.Koerfgen@home.ivm.de) Received: from franz.no.dom (port105.duesseldorf.ivm.de [195.247.65.105]) by mail.ivm.net (8.8.8/8.8.8) with ESMTP id JAA01601; Wed, 28 Jun 2000 09:35:21 +0200 X-To: linux@engr.sgi.com Message-ID: X-Mailer: XFMail 1.4.0 on Linux X-Priority: 3 (Normal) Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 8bit MIME-Version: 1.0 In-Reply-To: <39596570.68939D9@mvista.com> Date: Wed, 28 Jun 2000 09:35:22 +0200 (CEST) Reply-To: Harald Koerfgen Organization: none From: Harald Koerfgen To: Jun Sun Subject: RE: argument mismatch in prom_init() for DDB5074? Cc: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On 28-Jun-00 Jun Sun wrote: > > I compiled an image for DDB5074. I got a TLB fault immediately after > the control enters prom_init() function. A further probe shows that the > caller are passing differents arguments to prom_init than what the > callee expected. See code excerpt below. > > Does this mean the code of DDB5074 is outdated? In any case, can > someone give me a hint on how to fix this? It does not look obvious at > the first sight... That's probably ok. The different bootloaders on different platforms loaders pass different arguments to the kernel. harry@localhost:~> cd linux/arch/mips harry@localhost:~/linux/arch/mips > grep prom_init\( `find . -name '*.c'` ./arc/init.c:int __init prom_init(int argc, char **argv, char **envp, int*prom_vec) ./baget/prom/init.c:int __init prom_init(unsigned int mem_upper) ./ddb5074/prom.c:void __init prom_init(const char *s) ./dec/prom/init.c:int __init prom_init(int argc, char **argv, ./kernel/setup.c:extern int prom_init(int, char **, char **, int *); ./kernel/setup.c: prom_init(argc, argv, envp, prom_vec); The call in setup.c just has to make shure that all possible arguments are passed to the platform specific prom_init(). How they are interpreted is up to prom_init(). -- Regards, Harald From owner-linux-mips@oss.sgi.com Wed Jun 28 00:38:08 2000 Received: by oss.sgi.com id ; Wed, 28 Jun 2000 00:37:58 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:29794 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Wed, 28 Jun 2000 00:37:48 -0700 Received: from cthulhu.engr.sgi.com (gate3-relay.engr.sgi.com [130.62.1.234]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id AAA29078 for ; Wed, 28 Jun 2000 00:32:54 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id AAA16949 for ; Wed, 28 Jun 2000 00:37:21 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t111.niisi.ras.ru (t111.niisi.ras.ru [193.232.173.111]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id AAA02650 for ; Wed, 28 Jun 2000 00:37:11 -0700 (PDT) mail_from (raiko@niisi.msk.ru) Received: from t06.niisi.ras.ru (t06.niisi.ras.ru [193.232.173.6]) by t111.niisi.ras.ru (8.9.1/8.9.1) with ESMTP id LAA26697; Wed, 28 Jun 2000 11:36:18 +0400 Received: (from uucp@localhost) by t06.niisi.ras.ru (8.7.6/8.7.3) with UUCP id LAA32428; Wed, 28 Jun 2000 11:21:19 +0400 Received: from niisi.msk.ru (t34 [193.232.173.34]) by niisi.msk.ru (8.8.8/8.8.8) with ESMTP id LAA10188; Wed, 28 Jun 2000 11:32:27 +0400 (MSD) Message-ID: <3959ACC8.5C4CB127@niisi.msk.ru> Date: Wed, 28 Jun 2000 11:44:08 +0400 From: "Gleb O. Raiko" Organization: NIISI RAN X-Mailer: Mozilla 4.72 [en] (WinNT; I) X-Accept-Language: en,ru MIME-Version: 1.0 To: Jun Sun CC: linux@cthulhu.engr.sgi.com, linux-mips@fnet.fr Subject: Re: argument mismatch in prom_init() for DDB5074? References: <39596570.68939D9@mvista.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Jun Sun wrote: > > I compiled an image for DDB5074. I got a TLB fault immediately after > the control enters prom_init() function. A further probe shows that the > caller are passing differents arguments to prom_init than what the > callee expected. See code excerpt below. Most of the ports have the same mismatch. Usually, bios/prom/bootloader calls the box independend routine, kernel_netry (head.S) with some arguments. kernel_enry prepares C environment and calls init_arch w/ the same arguments. The number of the arguments and their types are box dependent. kernel_entry and init_arch never try to access the arguments to be passed by prom, but just pass the arguments to prom_init. Moreover, the arguments declared in init_arch don't match any mips box, they are mix of calling conventions of ARC console and DECstation prom (the last one). Fortunately, sizeof(int) == sizeof(long) == sizeof(pointer) in mips32, so we may happy live with that. > > Does this mean the code of DDB5074 is outdated? In any case, can > someone give me a hint on how to fix this? It does not look obvious at > the first sight... > I think, you shouldn't fix the argument list, continue bug searching in other places. Regards, Gleb. From owner-linux-mips@oss.sgi.com Thu Jun 29 04:45:07 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 04:44:58 -0700 Received: from chmls05.mediaone.net ([24.147.1.143]:53437 "EHLO chmls05.mediaone.net") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 04:44:44 -0700 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.252.183]) by chmls05.mediaone.net (8.8.7/8.8.7) with SMTP id HAA07923; Thu, 29 Jun 2000 07:44:51 -0400 (EDT) Message-ID: <019501bfe1bf$99746b10$0a00000a@decoy> From: "Jay Carlson" To: "Eric Watkins" , References: <001c01bfd6f7$536705b0$540ed7c0@hq.sd.cerf.net> Subject: Re: Status reports? Date: Thu, 29 Jun 2000 07:46:01 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing "Eric Watkins" writes: [...] > I know lots of this information gets distributed via IRC but someone should > let everyone, who's not on IRC all the time, know what's going on and what > progress is being made. IMO this is a serious problem for many open source development projects today. Much of the interaction occurs in IRC or instant message chats, and not in email. The people who are participating in the online chats have much better coordination, but it ends up excluding a lot of people. It's not just people in the wrong timezone who lose out---projects also lose the potential effort of people who join the mailing list, see nothing going on, and don't get a chance to help. I've found that even casual readers of a mailing list can bring insight from other projects to bear on problems. Jay From owner-linux-mips@oss.sgi.com Thu Jun 29 09:19:12 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 09:19:02 -0700 Received: from staff.cerf.net ([198.137.140.12]:40859 "EHLO staff.cerf.net") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 09:18:33 -0700 Received: from sdhqdt0132 (dhcp684.hq.sd.cerf.net [192.215.14.84]) by staff.cerf.net (8.10.1/8.9.3) with SMTP id e5TGIOG26331; Thu, 29 Jun 2000 16:18:24 GMT From: "Eric Watkins" To: "Jay Carlson" , Subject: RE: Status reports? Date: Thu, 29 Jun 2000 09:18:27 -0700 Message-ID: <001501bfe1e5$a86c6660$540ed7c0@hq.sd.cerf.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <019501bfe1bf$99746b10$0a00000a@decoy> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal X-Filtered-By: VBFilter 1.1 (.vbs, .shs) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, I agree. I have a friend who lurks on this mailing list and he swears the port is dead. Having the only www page the port has have look 2 years old(the SGI one) looks really bad. People who obtain SGI boxes(like me) and want to do something linux, have to look really hard before they find anything new. This port needs some good docs and a good www page badly. IMHO of course. Nice to see I'm not the only one. > -----Original Message----- > From: owner-linux-mips@oss.sgi.com > [mailto:owner-linux-mips@oss.sgi.com]On Behalf Of Jay Carlson > Sent: Thursday, June 29, 2000 4:46 AM > To: Eric Watkins; linux-mips@oss.sgi.com > Subject: Re: Status reports? > > > "Eric Watkins" writes: > > [...] > > > I know lots of this information gets distributed via IRC but someone > should > > let everyone, who's not on IRC all the time, know what's going > on and what > > progress is being made. > > IMO this is a serious problem for many open source development projects > today. Much of the interaction occurs in IRC or instant message > chats, and > not in email. The people who are participating in the online chats have > much better coordination, but it ends up excluding a lot of people. It's > not just people in the wrong timezone who lose out---projects > also lose the > potential effort of people who join the mailing list, see nothing > going on, > and don't get a chance to help. I've found that even casual readers of a > mailing list can bring insight from other projects to bear on problems. > > Jay > > From owner-linux-mips@oss.sgi.com Thu Jun 29 09:31:13 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 09:31:03 -0700 Received: from smtpe.casema.net ([195.96.96.172]:35857 "HELO smtpe.casema.net") by oss.sgi.com with SMTP id ; Thu, 29 Jun 2000 09:30:38 -0700 Received: (qmail 27007 invoked from network); 29 Jun 2000 16:24:05 -0000 Received: from unknown (HELO penguin.nl) (195.96.116.239) by smtpe.casema.net with SMTP; 29 Jun 2000 16:24:05 -0000 Message-ID: <395B795E.5CE23627@penguin.nl> Date: Thu, 29 Jun 2000 18:29:18 +0200 From: Richard X-Mailer: Mozilla 4.6 [en] (X11; I; Linux 2.2.15 i686) X-Accept-Language: en MIME-Version: 1.0 To: Eric Watkins CC: Jay Carlson , linux-mips@oss.sgi.com Subject: Re: Status reports? References: <001501bfe1e5$a86c6660$540ed7c0@hq.sd.cerf.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Hi, i've still got the linux-mips.org domain, but no time to build a website, if someone builds the site, i'll be happy to put it up. Richard > > > I agree. I have a friend who lurks on this mailing list and he swears the > port is dead. > > Having the only www page the port has have look 2 years old(the SGI one) > looks really bad. People who obtain SGI boxes(like me) and want to do > something linux, have to look really hard before they find anything new. > > This port needs some good docs and a good www page badly. > > IMHO of course. Nice to see I'm not the only one. > > > -----Original Message----- > > From: owner-linux-mips@oss.sgi.com > > [mailto:owner-linux-mips@oss.sgi.com]On Behalf Of Jay Carlson > > Sent: Thursday, June 29, 2000 4:46 AM > > To: Eric Watkins; linux-mips@oss.sgi.com > > Subject: Re: Status reports? > > > > > > "Eric Watkins" writes: > > > > [...] > > > > > I know lots of this information gets distributed via IRC but someone > > should > > > let everyone, who's not on IRC all the time, know what's going > > on and what > > > progress is being made. > > > > IMO this is a serious problem for many open source development projects > > today. Much of the interaction occurs in IRC or instant message > > chats, and > > not in email. The people who are participating in the online chats have > > much better coordination, but it ends up excluding a lot of people. It's > > not just people in the wrong timezone who lose out---projects > > also lose the > > potential effort of people who join the mailing list, see nothing > > going on, > > and don't get a chance to help. I've found that even casual readers of a > > mailing list can bring insight from other projects to bear on problems. > > > > Jay > > > > From owner-linux-mips@oss.sgi.com Thu Jun 29 10:40:23 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 10:40:13 -0700 Received: from mta01-svc.ntlworld.com ([62.253.162.41]:48853 "EHLO mta01-svc.server.ntlworld.com") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 10:40:00 -0700 Received: from icserver.ichilton.co.uk ([62.252.237.205]) by mta01-svc.server.ntlworld.com (InterMail vM.4.01.02.27 201-229-119-110) with ESMTP id <20000629174007.CAIW381.mta01-svc.server.ntlworld.com@icserver.ichilton.co.uk>; Thu, 29 Jun 2000 18:40:07 +0100 Received: from ian (ian@ian.ichilton.local [192.168.0.8]) by icserver.ichilton.co.uk (8.10.2/8.10.1) with SMTP id e5THcYH10834; Thu, 29 Jun 2000 18:38:36 +0100 From: "Ian Chilton" To: "Linux-Mips Mailing List \(Old\)" , "Linux-MIPS Mailing List" , , , "Jay Carlson" , "Ralf" Subject: RE: Status reports? Date: Thu, 29 Jun 2000 18:38:45 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) In-Reply-To: <019501bfe1bf$99746b10$0a00000a@decoy> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4132.2800 Importance: Normal Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hello, > I know lots of this information gets distributed via IRC but someone > should let everyone, who's not on IRC all the time, know what's going > on and what progress is being made. I am one of the guys in #mipslinux. Just a quick post to let you know that we have seen your posts, and I am going to talk to Ralf about this. I have had a chat to a few of the guys, and the points that came up are: * Yes, the SGI site needs updating....the port is very much active in a big way, but the dates on the site are from years back, which is not the case. Also, the Linux/MIPS howto is < 1 week old, but the date shows it's months old. * Not everything that happens on IRC is appropriate for the mailing list, otherwise it would be a very high volume list. * The problem is, most of the people on the port and in #mipslinux are developers, who are working on the ports, but have no time for documentation. Which is best, a port that is dead with loads of documentation, or an active / up-to-date / working port with little documentation. I agree that the documentation is sparce, and see the above issues. That is why, I am *thinking* of and suggesting to some of the guys that I, at least for now, maintain a site with * News from #mipslinux * Links to current resources * Possibly some documentation ..this will also need the co-operation of the programmers / maintainers to keep me informed on what is happening.. I need to discuss this with some of the key members of the team like Ralf and then if this goes ahead, i'll get something put together, but it will probably be a few weeks away from now. Just to finish, believe me, the port is very much alive, they are currently working on Linux 2.4 / Glibc 2.2 / GCC 2.96 If you have any chance at all, I suggest you stop by #mipslinux at times....all you need is an internet connection and one of the many IRC clients... Details are: /server irc.openprojects.net (port 6667) /join #mipslinux Any thoughts or problems with this, let me know (ian@ichilton.co.uk) Thanks! Bye for Now, Ian \|||/ (o o) /----------------ooO-(_)-Ooo----------------\ | Ian Chilton | | E-Mail : ian@ichilton.co.uk | \-------------------------------------------/ From owner-linux-mips@oss.sgi.com Thu Jun 29 11:55:13 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 11:55:04 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:26928 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 11:54:53 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id LAA28806 for ; Thu, 29 Jun 2000 11:49:58 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id OAA17972 for ; Thu, 29 Jun 2000 14:47:59 -0300 Date: Thu, 29 Jun 2000 14:47:59 -0300 From: "J. Scott Kasten" To: linux-mips@oss.sgi.com Subject: Re: MIPS symbol versioning patches In-Reply-To: <14671.21669.3126.181895@calypso.engr.sgi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Tue, 20 Jun 2000, Ulf Carlsson wrote: > Hi Guys, > > I have synced the binutils CVS with symbol versioning patches. The > current CVS tree at http://sourceware.cygnus.com/binutils should work > now. I have only tested compile and tests from glibc 2.1.90 so things > will probably break badly. I will be away from my office the next > five days, and I will unfortunately not have any machine to work on. > > I have verified with glibc CVS from today, glibc 2.96 CVS from today > and binutils CVS from today. > > Ulf > I take this to mean that we may soon have a working glibc 2.1.xx for MIPS? From owner-linux-mips@oss.sgi.com Thu Jun 29 12:14:34 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 12:14:13 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:12092 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 12:14:09 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id MAA02316 for ; Thu, 29 Jun 2000 12:09:20 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id MAA57565; Thu, 29 Jun 2000 12:13:46 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: by calypso.engr.sgi.com (Postfix, from userid 37984) id 86BE0A7875; Thu, 29 Jun 2000 12:12:41 -0700 (PDT) From: Ulf Carlsson MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14683.40873.494836.164828@calypso.engr.sgi.com> Date: Thu, 29 Jun 2000 12:12:41 -0700 (PDT) To: "J. Scott Kasten" Cc: linux-mips@oss.sgi.com Subject: Re: MIPS symbol versioning patches In-Reply-To: References: <14671.21669.3126.181895@calypso.engr.sgi.com> X-Mailer: VM 6.75 under Emacs 20.5.1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > I have synced the binutils CVS with symbol versioning patches. The > > current CVS tree at http://sourceware.cygnus.com/binutils should work > > now. I have only tested compile and tests from glibc 2.1.90 so things > > will probably break badly. I will be away from my office the next > > five days, and I will unfortunately not have any machine to work on. > > > > I have verified with glibc CVS from today, glibc 2.96 CVS from today > > and binutils CVS from today. > > > > Ulf > > > > I take this to mean that we may soon have a working glibc 2.1.xx for MIPS? > Yes, it's just a matter of recompiling everything against it. Keith Wesolowski is doing this. We have found some minor problems with glibc that we haven't been able to resolve yet. There is some bug in the dynamic linker, it tries to resolve symbols that aren't there in some packages. There is also a problem with compiling gcc 2.96 natively, but I actually think that's a problem in gcc 2.96. It shouldn't try to generate jump instructions like it does that in PIC code. I think the bootstrapping of gcc 2.96 currently is broken, but that's not a MIPS issue. Note that glibc 2.1 never will run on MIPS, glibc 2.1.90 is the development version for the forthcoming glibc 2.2. Ulf From owner-linux-mips@oss.sgi.com Thu Jun 29 13:17:24 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 13:17:14 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:50523 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 13:16:56 -0700 Received: from thor ([207.246.91.243]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via SMTP id NAA12820 for ; Thu, 29 Jun 2000 13:12:05 -0700 (PDT) mail_from (jsk@tetracon-eng.net) Received: from localhost (localhost [127.0.0.1]) by thor (950413.SGI.8.6.12/950213.SGI.AUTOCF) via ESMTP id QAA18180; Thu, 29 Jun 2000 16:06:44 -0300 Date: Thu, 29 Jun 2000 16:06:44 -0300 From: "J. Scott Kasten" To: Ulf Carlsson cc: linux-mips@oss.sgi.com Subject: Re: MIPS symbol versioning patches In-Reply-To: <14683.40873.494836.164828@calypso.engr.sgi.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Thanks, that's exactly what I needed to know. On Thu, 29 Jun 2000, Ulf Carlsson wrote: > > I take this to mean that we may soon have a working glibc 2.1.xx for MIPS? > > > > Yes, it's just a matter of recompiling everything against it. Keith > Wesolowski is doing this. We have found some minor problems with > glibc that we haven't been able to resolve yet. There is some bug in > the dynamic linker, it tries to resolve symbols that aren't there in > some packages. > > There is also a problem with compiling gcc 2.96 natively, but I > actually think that's a problem in gcc 2.96. It shouldn't try to > generate jump instructions like it does that in PIC code. I think the > bootstrapping of gcc 2.96 currently is broken, but that's not a MIPS > issue. > > Note that glibc 2.1 never will run on MIPS, glibc 2.1.90 is the > development version for the forthcoming glibc 2.2. > > Ulf > From owner-linux-mips@oss.sgi.com Thu Jun 29 14:20:27 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 14:20:17 -0700 Received: from u-241.karlsruhe.ipdial.viaginterkom.de ([62.180.10.241]:37638 "EHLO u-241.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 14:20:04 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Thu, 29 Jun 2000 15:18:55 +0200 Date: Thu, 29 Jun 2000 15:18:55 +0200 From: Ralf Baechle To: Daniel BROCARD Cc: linux-mips@oss.sgi.com, linux-mips@fnet.fr, linux-mips@vger.rutgers.edu Subject: Re: Linux port on R3000 Message-ID: <20000629151855.B15084@bacchus.dhis.org> References: <395AFC1D.BF3EB1D2@xcom-mc.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <395AFC1D.BF3EB1D2@xcom-mc.fr>; from daniel.brocard@xcom-mc.fr on Thu, Jun 29, 2000 at 09:34:53AM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 29, 2000 at 09:34:53AM +0200, Daniel BROCARD wrote: > your Linux/MIPS FAQ is dated of 26 janv 98 so, Wrong FAQ error. See http://oss.sgi.com/mips/mips-howto.html. > I'd like know the status of any R3000 port and pointers related on. > > Our hardware platform is based on LSI logic SC2000 chip. > This chip is used for DVB/MPEG decoding and the core is a TinyRISC > EZ4102 a "flavor" of R3000 (big endian) BUT without MMU. No TLB, no (real) Linux. Ralf From owner-linux-mips@oss.sgi.com Thu Jun 29 15:52:47 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 15:52:27 -0700 Received: from mx1.hcvlny.cv.net ([167.206.112.76]:16099 "EHLO mx1.hcvlny.cv.net") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 15:52:06 -0700 Received: from s1.optonline.net (s1.optonline.net [167.206.112.6]) by mx1.hcvlny.cv.net (8.9.3/8.9.3) with ESMTP id SAA12295; Thu, 29 Jun 2000 18:51:41 -0400 (EDT) Received: from hel-inc.com (d150-36.hmtmnj.optonline.net [24.189.150.36]) by s1.optonline.net (8.9.1/8.9.3) with ESMTP id SAA06509; Thu, 29 Jun 2000 18:51:20 -0400 (EDT) Message-ID: <395BD2EB.B441E889@hel-inc.com> Date: Thu, 29 Jun 2000 18:51:23 -0400 From: rob X-Mailer: Mozilla 4.73 [en] (X11; U; Linux 2.2.15-4mdksecure i586) X-Accept-Language: en MIME-Version: 1.0 To: Ian Chilton CC: "Linux-Mips Mailing List (Old)" , Linux-MIPS Mailing List , richardh@penguin.nl, watkinse@attens.com, Jay Carlson , Ralf , Largo Subject: Re: Status reports? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi, I've just been mostly lurking here on this list, but I thought I would throw out an offer to help out (seeing as this might be one of the only things I can do, not a big coder or anything). I own current.nu, CurrenTEK.com, and LinuXTC.com, and host several GNU/GPL projects. I'm about to bring the servers back up by the end of the week (on a very slow line), and shopping around for a decent place to colocate a box on some decent bandwidth (hopefully cheaper than the $800/month I was getting raped for last year). Anyhow, Justin Stressman (aka Largo of WindowMaker theme and FAQ fame) is pretty slick at html/php3/postgresql type web sites, and looking for a few things to showcase his talents with. I've worked with Justin for a couple years, and he is very good. He will be doing a remake for the official WindowMaker site, re-launching his own Window Maker Unofficial FAQ and theme site, and possibly working on the sourceforge.net soon. Justin want's to start his own web design studio, and has been taking on some of these GNU pages just to showcase his talents so that he might find some good paying work. I can show you some very nice samples of his work if you need to see them. He can probably do something that will allow you the ability to use a web interface to update "News" via a php/sql online form secure with passwords, link to current versions for downloads, etc... He will probably be willing to do it for a "Designed by.." line on the bottom of the page, unless it's extremely time consuming. Plus, the up side is, he lives on IRC ;-) so working with him should be easy considering that's where your talking about most of the news. And, once I get a server settled somewhere, I'd be happy to host the site also if necessary. Just thought I would mention it. Rob C. -- "Robert W. Current, Ph.D." - email Ian Chilton wrote: > > Hello, > > > I know lots of this information gets distributed via IRC but someone > > should let everyone, who's not on IRC all the time, know what's going > > on and what progress is being made. > > I am one of the guys in #mipslinux. > > Just a quick post to let you know that we have seen your posts, and I am > going to talk to Ralf about this. > > I have had a chat to a few of the guys, and the points that came up are: > > * Yes, the SGI site needs updating....the port is very much active in a big > way, but the dates on the site are from years back, which is not the case. > Also, the Linux/MIPS howto is < 1 week old, but the date shows it's months > old. > > * Not everything that happens on IRC is appropriate for the mailing list, > otherwise it would be a very high volume list. > > * The problem is, most of the people on the port and in #mipslinux are > developers, who are working on the ports, but have no time for > documentation. Which is best, a port that is dead with loads of > documentation, or an active / up-to-date / working port with little > documentation. > > I agree that the documentation is sparce, and see the above issues. That is > why, I am *thinking* of and suggesting to some of the guys that I, at least > for now, maintain a site with > * News from #mipslinux > * Links to current resources > * Possibly some documentation > > ..this will also need the co-operation of the programmers / maintainers to > keep me informed on what is happening.. > > I need to discuss this with some of the key members of the team like Ralf > and then if this goes ahead, i'll get something put together, but it will > probably be a few weeks away from now. > > Just to finish, believe me, the port is very much alive, they are currently > working on Linux 2.4 / Glibc 2.2 / GCC 2.96 > > If you have any chance at all, I suggest you stop by #mipslinux at > times....all you need is an internet connection and one of the many IRC > clients... > > Details are: > /server irc.openprojects.net (port 6667) > /join #mipslinux > > Any thoughts or problems with this, let me know (ian@ichilton.co.uk) > > Thanks! > > Bye for Now, > > Ian > > \|||/ > (o o) > /----------------ooO-(_)-Ooo----------------\ > | Ian Chilton | > | E-Mail : ian@ichilton.co.uk | > \-------------------------------------------/ -- "Robert W. Current, Ph.D." - email From owner-linux-mips@oss.sgi.com Thu Jun 29 17:34:40 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 17:34:20 -0700 Received: from u-241.karlsruhe.ipdial.viaginterkom.de ([62.180.10.241]:46342 "EHLO u-241.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 17:34:01 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 30 Jun 2000 02:33:53 +0200 Date: Fri, 30 Jun 2000 02:33:53 +0200 From: Ralf Baechle To: Ulf Carlsson Cc: "J. Scott Kasten" , linux-mips@oss.sgi.com Subject: Re: MIPS symbol versioning patches Message-ID: <20000630023352.E15960@bacchus.dhis.org> References: <14671.21669.3126.181895@calypso.engr.sgi.com> <14683.40873.494836.164828@calypso.engr.sgi.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <14683.40873.494836.164828@calypso.engr.sgi.com>; from ulfc@calypso.engr.sgi.com on Thu, Jun 29, 2000 at 12:12:41PM -0700 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 29, 2000 at 12:12:41PM -0700, Ulf Carlsson wrote: > Yes, it's just a matter of recompiling everything against it. Keith > Wesolowski is doing this. We have found some minor problems with > glibc that we haven't been able to resolve yet. There is some bug in > the dynamic linker, it tries to resolve symbols that aren't there in > some packages. > > There is also a problem with compiling gcc 2.96 natively, but I > actually think that's a problem in gcc 2.96. It shouldn't try to > generate jump instructions like it does that in PIC code. What jump instructions? jal goes ok, the assembler knows how expand them correctly for PIC code. Ralf From owner-linux-mips@oss.sgi.com Thu Jun 29 17:40:21 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 17:40:11 -0700 Received: from u-241.karlsruhe.ipdial.viaginterkom.de ([62.180.10.241]:48646 "EHLO u-241.karlsruhe.ipdial.viaginterkom.de") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 17:40:00 -0700 Received: (ralf@lappi) by lappi.waldorf-gmbh.de id ; Fri, 30 Jun 2000 02:39:56 +0200 Date: Fri, 30 Jun 2000 02:39:56 +0200 From: Ralf Baechle To: Richard Cc: Eric Watkins , Jay Carlson , linux-mips@oss.sgi.com Subject: Re: Status reports? Message-ID: <20000630023955.F15960@bacchus.dhis.org> References: <001501bfe1e5$a86c6660$540ed7c0@hq.sd.cerf.net> <395B795E.5CE23627@penguin.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 1.0.1i In-Reply-To: <395B795E.5CE23627@penguin.nl>; from richardh@penguin.nl on Thu, Jun 29, 2000 at 06:29:18PM +0200 X-Accept-Language: de,en,fr Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Thu, Jun 29, 2000 at 06:29:18PM +0200, Richard wrote: > i've still got the linux-mips.org domain, but no time to build a website, if > someone builds the site, i'll be happy to put it up. Somebody is just reworking the pages at SGI, we could point the domain there. Ralf From owner-linux-mips@oss.sgi.com Thu Jun 29 18:22:41 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 18:22:31 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:23092 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 18:22:12 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id SAA01368; Thu, 29 Jun 2000 18:27:41 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: from calypso.engr.sgi.com (calypso.engr.sgi.com [163.154.5.113]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA81213; Thu, 29 Jun 2000 18:21:44 -0700 (PDT) mail_from (ulfc@calypso.engr.sgi.com) Received: by calypso.engr.sgi.com (Postfix, from userid 37984) id 67274A7875; Thu, 29 Jun 2000 18:20:43 -0700 (PDT) From: Ulf Carlsson MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <14683.62955.352556.455553@calypso.engr.sgi.com> Date: Thu, 29 Jun 2000 18:20:43 -0700 (PDT) To: Ralf Baechle Cc: "J. Scott Kasten" , linux-mips@oss.sgi.com Subject: Re: MIPS symbol versioning patches In-Reply-To: <20000630023352.E15960@bacchus.dhis.org> References: <14671.21669.3126.181895@calypso.engr.sgi.com> <14683.40873.494836.164828@calypso.engr.sgi.com> <20000630023352.E15960@bacchus.dhis.org> X-Mailer: VM 6.75 under Emacs 20.5.1 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > Yes, it's just a matter of recompiling everything against it. Keith > > Wesolowski is doing this. We have found some minor problems with > > glibc that we haven't been able to resolve yet. There is some bug in > > the dynamic linker, it tries to resolve symbols that aren't there in > > some packages. > > > > There is also a problem with compiling gcc 2.96 natively, but I > > actually think that's a problem in gcc 2.96. It shouldn't try to > > generate jump instructions like it does that in PIC code. > > What jump instructions? jal goes ok, the assembler knows how expand > them correctly for PIC code. It uses j to perform branches that are out of range. I think gcc expects the assembler to translate it into a GOT16/LO16 thing if it's out of range. Ulf From owner-linux-mips@oss.sgi.com Thu Jun 29 22:10:43 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 22:10:22 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:53001 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Thu, 29 Jun 2000 22:10:08 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id WAA27108; Thu, 29 Jun 2000 22:10:05 -0700 Date: Thu, 29 Jun 2000 22:10:05 -0700 From: Keith M Wesolowski To: ralf@uni-koblenz.de Cc: linux-mips@oss.sgi.com Subject: [PATCH] microsecond timers for IP22 Message-ID: <20000629221005.A26965@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing As we discussed, this patch implements microsecond timers for IP22. It is against current 2.3 CVS. Note that it is also safe to remove arch/mips/sgi/indy_timer.c completely with this patch. This looks ok to me but I'm certainly willing to accept that I've hosed it horribly. The patch is a bit too large for mail so I've put it at ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/testing/timers.diff. It's interesting to note that on my Indy the first two timer calibrations differ, triggering the third round, which works. I'm not quite sure why this is, but the final value is correct. Lmbench runs more quickly and even properly detects the clock speed. There is still an unrelated problem in the lat_unix test however. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Thu Jun 29 23:55:13 2000 Received: by oss.sgi.com id ; Thu, 29 Jun 2000 23:55:03 -0700 Received: from Cantor.suse.de ([194.112.123.193]:14859 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Thu, 29 Jun 2000 23:54:40 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 3BBFA1E1A0; Fri, 30 Jun 2000 08:54:48 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id BE2F010A028; Fri, 30 Jun 2000 08:54:46 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 137uVi-0006FD-00; Fri, 30 Jun 2000 08:42:46 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id 54D181821; Fri, 30 Jun 2000 08:42:45 +0200 (CEST) Mail-Copies-To: never To: "J. Scott Kasten" Cc: linux-mips@oss.sgi.com Subject: Re: MIPS symbol versioning patches References: From: Andreas Jaeger Date: 30 Jun 2000 08:42:45 +0200 In-Reply-To: "J. Scott Kasten"'s message of "Thu, 29 Jun 2000 14:47:59 -0300" Message-ID: Lines: 29 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> J Scott Kasten writes: J> On Tue, 20 Jun 2000, Ulf Carlsson wrote: >> Hi Guys, >> >> I have synced the binutils CVS with symbol versioning patches. The >> current CVS tree at http://sourceware.cygnus.com/binutils should work >> now. I have only tested compile and tests from glibc 2.1.90 so things >> will probably break badly. I will be away from my office the next >> five days, and I will unfortunately not have any machine to work on. >> >> I have verified with glibc CVS from today, glibc 2.96 CVS from today >> and binutils CVS from today. >> >> Ulf >> J> I take this to mean that we may soon have a working glibc 2.1.xx for MIPS? No - only a glibc 2.2. Have a look at http://www.suse.de/~aj/glibc-mips.html Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Fri Jun 30 05:55:33 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 05:55:13 -0700 Received: from host13.mucom.co.il ([192.115.216.45]:58120 "EHLO mucom.co.il") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 05:54:50 -0700 Received: (from marc@localhost) by mucom.co.il (8.9.3/8.9.3) id OAA09655 for linux-mips@oss.sgi.com; Fri, 30 Jun 2000 14:52:51 -0200 Date: Fri, 30 Jun 2000 14:52:51 -0200 From: Marc Esipovich To: linux-mips@oss.sgi.com Subject: NetBSD on O2 ;) Message-ID: <20000630145251.A9590@darkstar.netvision> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Hi guys, I just noticed this on Slashdot: NetBSD have added another platform to their supported hardware list. As the NetBSD/sgimips and announcement pages say, NetBSD/sgimips is now stable enough to run multi-user, making NetBSD the first OpenSource OS to run on the SGI O2. Currently it's known to work on the R5000 CPU, R10K and R12K are untested due to lack of hardware. http://www.netbsd.org/Ports/sgimips/ From my understanding R1[02]K do have their issues with cache coherency, this is a big step forward, it wouldn't be long before we see NetBSD and probably soon-to-follow Linux on O2 with all CPU configurations. bye, Marc. -- marc @ corky.net fingerprint = D1F0 5689 967F B87A 98EB C64D 256A D6BF 80DE 6D3C /"\ \ / ASCII Ribbon Campaign X Against HTML Mail / \ From owner-linux-mips@oss.sgi.com Fri Jun 30 07:03:04 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 07:02:44 -0700 Received: from chmls05.mediaone.net ([24.147.1.143]:12447 "EHLO chmls05.mediaone.net") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 07:02:26 -0700 Received: from decoy (h00a0cc39f081.ne.mediaone.net [24.218.252.183]) by chmls05.mediaone.net (8.8.7/8.8.7) with SMTP id KAA28978; Fri, 30 Jun 2000 10:02:32 -0400 (EDT) Message-ID: <073a01bfe29c$00995e90$0a00000a@decoy> From: "Jay Carlson" To: "Ralf Baechle" , "Alan Cox" Cc: "Alan Cox" , "Andreas Jaeger" , "Mike Klar" , , , References: Subject: Re: errno assignment in _syscall macros and glibc Date: Fri, 30 Jun 2000 10:03:41 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6700 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6700 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > > Sure; these days glibc is more or less synonym with libc and I was using > > it in that sense. > > > > What small, portable libcs do we have available anyway? Some mipers will > > want one. > > I've been playing with the Linux8086 libc which is tiny but not portable when > Prumpf pointed out that Cygnus newlib is designed for precisely this job. Its > about 250K MIPS32 (my PDA has mips32/mips64 but not mips16 - duh!!) Does newlib work under Linux? I thought it was missing (for example) the syscalls, and generally needed work to be ported to Linux. I'm interested in helping with this, if people are already doing it. *BSD libc has been suggested by a few people. BTW, MIPS32 is not a synonym for 32-bit MIPS architecture. :-( This appears to be the fault of marketing people. Quoting http://www.mips.com/products/s2p5.html : --- The MIPS32T architecture is a superset of the previous MIPS IT and MIPS IIT Instruction Set Architectures (ISA) and incorporates powerful new instructions specifically for embedded applications, as well as proven memory management and privileged mode control mechanisms previously found only in 64-bit R4000® and R5000® MIPS® processors. --- It's got conditional move, multiply/add, count leading ones/zeroes, and some other stuff. I don't know of any shipping PDAs using MIPS32 chips. Jay From owner-linux-mips@oss.sgi.com Fri Jun 30 08:41:54 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 08:41:34 -0700 Received: from Cantor.suse.de ([194.112.123.193]:27919 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Fri, 30 Jun 2000 08:41:23 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 8AD481E20D; Fri, 30 Jun 2000 17:41:31 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id 92E8910A026; Fri, 30 Jun 2000 17:41:30 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 1382Py-0008Lk-00; Fri, 30 Jun 2000 17:09:22 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id 8B2C81821; Fri, 30 Jun 2000 17:09:20 +0200 (CEST) To: libc-alpha Mailinglist Cc: linux-mips@oss.sgi.com Subject: origtest failure with MIPS-Linux glibc From: Andreas Jaeger Date: 30 Jun 2000 17:09:20 +0200 Message-ID: Lines: 35 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing The current glibc testsuite contains in the elf subdirectory a test called origtest which loads dynamically (via dlopen) the shared file testobj1.so. This test fails on MIPS-Linux since testobj1.so contains an undefined reference to foo which can't be fulfilled. In elf_machine_runtime_setup (sysdeps/mips/dl-machine.h) elf_machine_got_rel is called to relocate the GOT table. The ABI defines that "if an entry correspondends to an undefined symbol and the global offset table entry contains a zero, the entry must be resolved by the dynamic linker". foo has a value of 0 and therefore we need to relocate it (even if it is not called at all) - but there's no reference at all: Symbol table '.dynsym' contains 50 entries: Num: Value Size Type Bind Vis Ndx Name [...] 48: 00000000 0 NOTYPE GLOBAL DEFAULT UND foo Who's to blame here? Is this a restriction of the MIPS ELF ABI (I do think that glibc's dynamic linker does the right think in this case)? Or is there a bug in binutils/gcc which should produce a wrong symbol entry? Is there anything I can do to fix this failure? Any comments are very welcome. Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Fri Jun 30 09:15:55 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 09:15:45 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:38666 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 09:15:24 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id JAA32328 for linux-mips@oss.sgi.com; Fri, 30 Jun 2000 09:15:24 -0700 Date: Fri, 30 Jun 2000 09:15:24 -0700 From: Keith M Wesolowski To: linux-mips@oss.sgi.com Subject: glibc 2.2 based root fs available Message-ID: <20000630091524.A32081@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is the Simple MIPS/Linux 0.2a 'pre-Alpha and we're not joking' release. You can obtain the kernel from ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/kernels/vmlinux-24test2 and the filesystem from .../mips-linux/testing/core-0.2a.tar.gz. This is a big-endian filesystem and the kernel is for SGI IP22. This is a developer release, mainly to help shake out bugs in the toolchain and glibc. This release will not run properly on kernel 2.2. Mandatory release notes are at .../mips-linux/testing/README.core-02a. There is still a good deal of functionality missing, including the networking utilities, ext2fs tools, and a c++ compiler. This release includes the libemptysymbol hack to work around the "undefined symbol: " problem until it's fixed. Bug reports accepted but in general nothing is patched so you may also wish to send reports to the appropriate maintainers. Happy hacking! -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Fri Jun 30 09:34:15 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 09:33:55 -0700 Received: from Cantor.suse.de ([194.112.123.193]:64017 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Fri, 30 Jun 2000 09:33:34 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 891111E221; Fri, 30 Jun 2000 18:33:43 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id 84D7210A026; Fri, 30 Jun 2000 18:33:42 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 1383e6-0000AY-00; Fri, 30 Jun 2000 18:28:02 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id D8C2F1821; Fri, 30 Jun 2000 18:28:01 +0200 (CEST) Mail-Copies-To: never To: Keith M Wesolowski Cc: linux-mips@oss.sgi.com Subject: Re: glibc 2.2 based root fs available References: <20000630091524.A32081@chem.unr.edu> From: Andreas Jaeger Date: 30 Jun 2000 18:28:01 +0200 In-Reply-To: Keith M Wesolowski's message of "Fri, 30 Jun 2000 09:15:24 -0700" Message-ID: Lines: 27 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> Keith M Wesolowski writes: > This is the Simple MIPS/Linux 0.2a 'pre-Alpha and we're not joking' > release. You can obtain the kernel from > ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/kernels/vmlinux-24test2 > and the filesystem from .../mips-linux/testing/core-0.2a.tar.gz. This > is a big-endian filesystem and the kernel is for SGI IP22. > This is a developer release, mainly to help shake out bugs in the > toolchain and glibc. This release will not run properly on kernel > 2.2. Mandatory release notes are at > .../mips-linux/testing/README.core-02a. There is still a good deal of > functionality missing, including the networking utilities, ext2fs > tools, and a c++ compiler. This release includes the libemptysymbol > hack to work around the "undefined symbol: " problem until it's fixed. What kind of hack? Can you make it available to me? I haven't found a fix for the problem yet :-( Thanks a lot for making this available! Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Fri Jun 30 09:50:15 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 09:50:05 -0700 Received: from rotor.chem.unr.edu ([134.197.32.176]:46858 "EHLO rotor.chem.unr.edu") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 09:49:47 -0700 Received: (from wesolows@localhost) by rotor.chem.unr.edu (8.9.3/8.9.3) id JAA00476; Fri, 30 Jun 2000 09:49:45 -0700 Date: Fri, 30 Jun 2000 09:49:45 -0700 From: Keith M Wesolowski To: Andreas Jaeger Cc: linux-mips@oss.sgi.com Subject: Re: glibc 2.2 based root fs available Message-ID: <20000630094945.A334@chem.unr.edu> References: <20000630091524.A32081@chem.unr.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2i In-Reply-To: ; from aj@suse.de on Fri, Jun 30, 2000 at 06:28:01PM +0200 X-Complaints-To: postmaster@chem.unr.edu Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing On Fri, Jun 30, 2000 at 06:28:01PM +0200, Andreas Jaeger wrote: > > tools, and a c++ compiler. This release includes the libemptysymbol > > hack to work around the "undefined symbol: " problem until it's fixed. > > What kind of hack? Can you make it available to me? I haven't found > a fix for the problem yet :-( It's not a fix, just a workaround. See ftp://ftp.foobazco.org/pub/people/wesolows/mips-linux/testing/libemptysymbol.so and the accompanying README. -- Keith M Wesolowski wesolows@chem.unr.edu University of Nevada http://www.chem.unr.edu Chemistry Department Systems and Network Administrator From owner-linux-mips@oss.sgi.com Fri Jun 30 10:57:05 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 10:56:55 -0700 Received: from runyon.cygnus.com ([205.180.230.5]:40951 "EHLO cygnus.com") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 10:56:33 -0700 Received: from otr.mynet (dialin-sv-02.cygnus.com [205.180.231.52]) by runyon.cygnus.com (8.8.7-cygnus/8.8.7) with ESMTP id KAA18918; Fri, 30 Jun 2000 10:56:36 -0700 (PDT) Received: by otr.mynet (Postfix, from userid 500) id E5C4F30B3; Fri, 30 Jun 2000 10:56:36 -0700 (PDT) To: Andreas Jaeger Cc: libc-alpha Mailinglist , linux-mips@oss.sgi.com Subject: Re: origtest failure with MIPS-Linux glibc References: Reply-To: drepper@cygnus.com (Ulrich Drepper) X-fingerprint: BE 3B 21 04 BC 77 AC F0 61 92 E4 CB AC DD B9 5A Mime-Version: 1.0 (generated by tm-edit 1.5) Content-Type: text/plain; charset=US-ASCII From: Ulrich Drepper Date: 30 Jun 2000 10:56:36 -0700 In-Reply-To: Andreas Jaeger's message of "30 Jun 2000 17:09:20 +0200" Message-ID: Lines: 16 X-Mailer: Gnus v5.6.45/XEmacs 21.1 - "Capitol Reef" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Andreas Jaeger writes: > This test fails on MIPS-Linux since testobj1.so contains an undefined > reference to foo which can't be fulfilled. I thought we went over this alread. There is a definition of `foo', it is in origtest.c. I MIPS has problems it's in not doing what -rdynamic is expected to do. $ nm elf/origtest|grep foo 08048680 T foo -- ---------------. ,-. 1325 Chesapeake Terrace Ulrich Drepper \ ,-------------------' \ Sunnyvale, CA 94089 USA Red Hat `--' drepper at redhat.com `------------------------ From owner-linux-mips@oss.sgi.com Fri Jun 30 11:17:05 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 11:16:56 -0700 Received: from Cantor.suse.de ([194.112.123.193]:11271 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Fri, 30 Jun 2000 11:16:30 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 953521E231; Fri, 30 Jun 2000 20:16:38 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id 94E6A10A026; Fri, 30 Jun 2000 20:16:37 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 1385IA-0000f2-00; Fri, 30 Jun 2000 20:13:30 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id 0DDC81821; Fri, 30 Jun 2000 20:13:29 +0200 (CEST) Mail-Copies-To: never To: drepper@cygnus.com (Ulrich Drepper) Cc: libc-alpha Mailinglist , linux-mips@oss.sgi.com Subject: Re: origtest failure with MIPS-Linux glibc References: From: Andreas Jaeger Date: 30 Jun 2000 20:13:29 +0200 In-Reply-To: Ulrich Drepper's message of "30 Jun 2000 10:56:36 -0700" Message-ID: Lines: 23 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> Ulrich Drepper writes: Uli> Andreas Jaeger writes: >> This test fails on MIPS-Linux since testobj1.so contains an undefined >> reference to foo which can't be fulfilled. Uli> I thought we went over this alread. There is a definition of `foo', We spoke about it - but didn't fix it. Uli> it is in origtest.c. I MIPS has problems it's in not doing what Uli> -rdynamic is expected to do. Uli> $ nm elf/origtest|grep foo Uli> 08048680 T foo But origtest doesn't have -rdynamic. There's no LDFLAGS-origtest = -rdynamic in elf/Makefile. Should it be there? Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Fri Jun 30 11:28:05 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 11:27:45 -0700 Received: from runyon.cygnus.com ([205.180.230.5]:33528 "EHLO cygnus.com") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 11:27:33 -0700 Received: from otr.mynet (dialin-sv-02.cygnus.com [205.180.231.52]) by runyon.cygnus.com (8.8.7-cygnus/8.8.7) with ESMTP id LAA21769; Fri, 30 Jun 2000 11:27:41 -0700 (PDT) Received: by otr.mynet (Postfix, from userid 500) id D810E30B3; Fri, 30 Jun 2000 11:27:45 -0700 (PDT) To: libc-alpha Mailinglist Cc: linux-mips@oss.sgi.com Subject: Re: origtest failure with MIPS-Linux glibc References: Reply-To: drepper@cygnus.com (Ulrich Drepper) X-fingerprint: BE 3B 21 04 BC 77 AC F0 61 92 E4 CB AC DD B9 5A Mime-Version: 1.0 (generated by tm-edit 1.5) Content-Type: text/plain; charset=US-ASCII From: Ulrich Drepper Date: 30 Jun 2000 11:27:45 -0700 In-Reply-To: Andreas Jaeger's message of "30 Jun 2000 20:13:29 +0200" Message-ID: Lines: 12 X-Mailer: Gnus v5.6.45/XEmacs 21.1 - "Capitol Reef" Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing Andreas Jaeger writes: > But origtest doesn't have -rdynamic. There's no > LDFLAGS-origtest = -rdynamic > in elf/Makefile. Should it be there? Look again :-) -- ---------------. ,-. 1325 Chesapeake Terrace Ulrich Drepper \ ,-------------------' \ Sunnyvale, CA 94089 USA Red Hat `--' drepper at redhat.com `------------------------ From owner-linux-mips@oss.sgi.com Fri Jun 30 11:37:36 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 11:37:16 -0700 Received: from Cantor.suse.de ([194.112.123.193]:56583 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Fri, 30 Jun 2000 11:37:12 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id 13BCD1E231; Fri, 30 Jun 2000 20:37:21 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id 74A3710A026; Fri, 30 Jun 2000 20:37:20 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 1385d9-0000qB-00; Fri, 30 Jun 2000 20:35:11 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id 2D6591821; Fri, 30 Jun 2000 20:35:10 +0200 (CEST) Mail-Copies-To: never To: drepper@cygnus.com (Ulrich Drepper) Cc: libc-alpha Mailinglist , linux-mips@oss.sgi.com Subject: Re: origtest failure with MIPS-Linux glibc References: From: Andreas Jaeger Date: 30 Jun 2000 20:35:09 +0200 In-Reply-To: Ulrich Drepper's message of "30 Jun 2000 11:27:45 -0700" Message-ID: Lines: 16 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> Ulrich Drepper writes: Uli> Andreas Jaeger writes: >> But origtest doesn't have -rdynamic. There's no >> LDFLAGS-origtest = -rdynamic >> in elf/Makefile. Should it be there? Uli> Look again :-) Thanks! Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Fri Jun 30 11:50:37 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 11:50:26 -0700 Received: from Cantor.suse.de ([194.112.123.193]:31752 "HELO Cantor.suse.de") by oss.sgi.com with SMTP id ; Fri, 30 Jun 2000 11:50:09 -0700 Received: from Hermes.suse.de (Hermes.suse.de [194.112.123.136]) by Cantor.suse.de (Postfix) with ESMTP id C0A4B1E233; Fri, 30 Jun 2000 20:50:17 +0200 (MEST) Received: from arthur.inka.de (Galois.suse.de [10.0.0.1]) by Hermes.suse.de (Postfix) with ESMTP id 0299D10A026; Fri, 30 Jun 2000 20:50:17 +0200 (MEST) Received: from gromit.rhein-neckar.de ([192.168.27.3] ident=postfix) by arthur.inka.de with esmtp (Exim 3.14 #1) id 1385gm-0000rY-00; Fri, 30 Jun 2000 20:38:56 +0200 Received: by gromit.rhein-neckar.de (Postfix, from userid 207) id 690661821; Fri, 30 Jun 2000 20:38:55 +0200 (CEST) Mail-Copies-To: never To: drepper@cygnus.com (Ulrich Drepper) Cc: libc-alpha Mailinglist , linux-mips@oss.sgi.com Subject: Re: origtest failure with MIPS-Linux glibc References: From: Andreas Jaeger Date: 30 Jun 2000 20:38:55 +0200 In-Reply-To: Ulrich Drepper's message of "30 Jun 2000 11:27:45 -0700" Message-ID: Lines: 16 User-Agent: Gnus/5.0807 (Gnus v5.8.7) XEmacs/21.1 (Capitol Reef) MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing >>>>> Ulrich Drepper writes: Uli> Andreas Jaeger writes: >> But origtest doesn't have -rdynamic. There's no >> LDFLAGS-origtest = -rdynamic >> in elf/Makefile. Should it be there? Uli> Look again :-) One test failure less ;-). Andreas -- Andreas Jaeger SuSE Labs aj@suse.de private aj@arthur.inka.de From owner-linux-mips@oss.sgi.com Fri Jun 30 13:07:26 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 13:07:06 -0700 Received: from chmls05.mediaone.net ([24.147.1.143]:8395 "EHLO chmls05.mediaone.net") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 13:06:45 -0700 Received: from pianoman.cluster.toy (h00001c600ed5.ne.mediaone.net [24.147.29.131]) by chmls05.mediaone.net (8.8.7/8.8.7) with ESMTP id QAA09114 for ; Fri, 30 Jun 2000 16:06:53 -0400 (EDT) Message-Id: <200006302006.QAA09114@chmls05.mediaone.net> Date: Fri, 30 Jun 2000 16:06:54 EDT From: John Clemens To: linux-mips@oss.sgi.com Subject: XZ Graphics specs (again).. Reply-To: clemej@alum.rpi.edu X-Mailer: Spruce 0.7.1 for X11 w/smtpio 0.7.9 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing I know this subject has come up before.. several times. I have XZ graphics on my indigo2, and I would like to write linux drivers to at least get a frame buffer up and running, and then X. (heck, given enough docs, maybe even MESA support.) Now, I know that the docs are either very hard to find or non-existant at SGI anymore, so this is a serious hinderance. So I have a couple of possible solutions: 1) Ulf, could you run that script of yours again that found all the NG1 graphics docs and look for XZ (and hey, while you're at it, indigo2) docs? 2) if that turns up nothing.. is there any possibility of someone (me, I'm volunteering) to sign an NDA and look at the IRIX source to see how it programs it and reverse engineer a driver from that? What I would need in that case is someone to give me a rundown on copyright law so that I know what I can and can't do. As much as I'd like to do this, I can't afford to get sued ;-) thoughts? from SGI? legality concerns? I'm volunteering to do the grunt work... john.c -- - -- /* John Clemens http://www.rpi.edu/~clemej _/ "I Hate Quotes" */ /* ICQ: 7175925 clemej@alum.rpi.edu _/ -- Samuel L. Clemens */ From owner-linux-mips@oss.sgi.com Fri Jun 30 13:21:26 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 13:21:16 -0700 Received: from staff.cerf.net ([198.137.140.12]:26866 "EHLO staff.cerf.net") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 13:20:50 -0700 Received: from sdhqdt0132 (dhcp684.hq.sd.cerf.net [192.215.14.84]) by staff.cerf.net (8.10.1/8.9.3) with SMTP id e5UKKnG12816; Fri, 30 Jun 2000 20:20:49 GMT From: "Eric Watkins" To: , Subject: RE: XZ Graphics specs (again).. Date: Fri, 30 Jun 2000 13:20:58 -0700 Message-ID: <001601bfe2d0$b38a6650$540ed7c0@hq.sd.cerf.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: <200006302006.QAA09114@chmls05.mediaone.net> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Importance: Normal X-Filtered-By: VBFilter 1.1 (.vbs, .shs) Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing This is great news. I have an indigo2 that I'd really like to use. The serial port solution isn't really a good one. I really want to use my nice big monitor and all that cool SGI video hardware. Using SGIlinux on a dumb terminal on a serial port just doesn't justify the hassle for some reason. IMHO of course.. While I don't code, if you need another machine to test on please let me know. Please keep us all informed as to how this progresses. Off topic: Did everyone see the announcement on slashdot today about NetBSD? http://www.netbsd.org/Ports/sgimips/ Thanks, Eric > -----Original Message----- > From: owner-linux-mips@oss.sgi.com > [mailto:owner-linux-mips@oss.sgi.com]On Behalf Of John Clemens > Sent: Friday, June 30, 2000 1:07 PM > To: linux-mips@oss.sgi.com > Subject: XZ Graphics specs (again).. > > > > > I know this subject has come up before.. several times. I have > XZ graphics > on > my indigo2, and I would like to write linux drivers to at least > get a frame > buffer up and running, and then X. (heck, given enough docs, maybe even > MESA > support.) Now, I know that the docs are either very hard to find or > non-existant at SGI anymore, so this is a serious hinderance. So I have a > couple of possible solutions: > > 1) Ulf, could you run that script of yours again that found all the NG1 > graphics > docs and look for XZ (and hey, while you're at it, indigo2) docs? > > 2) if that turns up nothing.. is there any possibility of someone (me, I'm > volunteering) to sign an NDA and look at the IRIX source to see how it > programs > it and reverse engineer a driver from that? What I would need in > that case > is > someone to give me a rundown on copyright law so that I know what > I can and > can't do. As much as I'd like to do this, I can't afford to get sued ;-) > > thoughts? from SGI? legality concerns? I'm volunteering to do the grunt > work... > > john.c > > -- > - -- > /* John Clemens http://www.rpi.edu/~clemej _/ "I Hate Quotes" */ > /* ICQ: 7175925 clemej@alum.rpi.edu _/ -- Samuel L. > Clemens */ > > > From owner-linux-mips@oss.sgi.com Fri Jun 30 18:28:27 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 18:28:07 -0700 Received: from deliverator.sgi.com ([204.94.214.10]:6716 "EHLO deliverator.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 18:27:45 -0700 Received: from nodin.corp.sgi.com (fddi-nodin.corp.sgi.com [198.29.75.193]) by deliverator.sgi.com (980309.SGI.8.8.8-aspam-6.2/980310.SGI-aspam) via ESMTP id SAA15577 for ; Fri, 30 Jun 2000 18:22:44 -0700 (PDT) mail_from (jsun@mvista.com) Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by nodin.corp.sgi.com (980427.SGI.8.8.8/980728.SGI.AUTOCF) via ESMTP id SAA30913 for ; Fri, 30 Jun 2000 18:25:58 -0700 (PDT) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id SAA24727 for ; Fri, 30 Jun 2000 18:24:00 -0700 (PDT) mail_from (jsun@mvista.com) Received: from hermes.mvista.com (gateway-490.mvista.com [63.192.220.206]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id SAA09261 for ; Fri, 30 Jun 2000 18:24:00 -0700 (PDT) mail_from (jsun@mvista.com) Received: from mvista.com (IDENT:jsun@orion.mvista.com [10.0.0.75]) by hermes.mvista.com (8.9.3/8.9.3) with ESMTP id SAA23174; Fri, 30 Jun 2000 18:22:59 -0700 Message-ID: <395D47F2.266CE27D@mvista.com> Date: Fri, 30 Jun 2000 18:22:58 -0700 From: Jun Sun X-Mailer: Mozilla 4.7 [en] (X11; I; Linux 2.2.12-20b i586) X-Accept-Language: en MIME-Version: 1.0 To: Dominic Sweetman CC: linux-mips@fnet.fr, linux@cthulhu.engr.sgi.com, nigel@algor.co.uk Subject: Re: R5000 support (specifically two-way set-associative cache...) References: <394EA5A0.B882F66A@mvista.com> <200006200947.KAA08574@mudchute.algor.co.uk> <394FBAC6.3D29C4A7@mvista.com> <394FBF91.76AE6FD0@mvista.com> <200006202059.VAA19304@mudchute.algor.co.uk> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing > Fundamentally: > > o "index" operations just go first through one set, then the other. > So long as initialisation routines are applied to each possible > index in turn, both sets get initialised. > > o "hit" operations "just work". > > So long as initialisation is done carefully (basic rule: perform one > stage to the whole cache before going on to the next), run-time cache > maintenance can and should be done with "hit" instructions, and you > don't need to worry whether the CPU is direct mapped, 2- or 4-way set > associative. > > (it's all explained in my book, "See MIPS Run", of course...) > > Even with the Vr5432 you only have to know the difference when first > setting up the CPU. > Not exactly - the current Linux/MIPS implementation uese index operations to flush cache. As a result flush_all_cache() does not really flush all cache. > Dominic Sweetman > Algorithmics Ltd Jun > dom@algor.co.uk From owner-linux-mips@oss.sgi.com Fri Jun 30 23:45:08 2000 Received: by oss.sgi.com id ; Fri, 30 Jun 2000 23:44:49 -0700 Received: from pneumatic-tube.sgi.com ([204.94.214.22]:11566 "EHLO pneumatic-tube.sgi.com") by oss.sgi.com with ESMTP id ; Fri, 30 Jun 2000 23:44:32 -0700 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by pneumatic-tube.sgi.com (980327.SGI.8.8.8-aspam/980310.SGI-aspam) via ESMTP id XAA03774 for ; Fri, 30 Jun 2000 23:50:01 -0700 (PDT) mail_from (kevink@mips.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id XAA12459 for ; Fri, 30 Jun 2000 23:44:01 -0700 (PDT) mail_from (kevink@mips.com) Received: from mx.mips.com (mx.mips.com [206.31.31.226]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id XAA06719 for ; Fri, 30 Jun 2000 23:44:00 -0700 (PDT) mail_from (kevink@mips.com) Received: from newman.mips.com (newman [206.31.31.8]) by mx.mips.com (8.9.3/8.9.0) with ESMTP id XAA20994; Fri, 30 Jun 2000 23:44:18 -0700 (PDT) Received: from Ulysses (ulysses [192.168.236.13]) by newman.mips.com (8.9.3/8.9.0) with SMTP id XAA14777; Fri, 30 Jun 2000 23:44:16 -0700 (PDT) Message-ID: <000601bfe328$2e3fe6c0$0deca8c0@Ulysses> From: "Kevin D. Kissell" To: "Jun Sun" , "Dominic Sweetman" Cc: , , Subject: Re: R5000 support (specifically two-way set-associative cache...) Date: Sat, 1 Jul 2000 08:46:59 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.1 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 Sender: owner-linux-mips@oss.sgi.com Precedence: bulk Return-Path: X-Orcpt: rfc822;linux-mips-outgoing In any case, note that the cache descriptor structures defined by MIPS Technologies for the Linux 2.2 kernels (coming one of these days to 2.3) allow for the cache geometry to be fully described and specified, either as a simple table copy based on the PrID, or as a combination of table data and dynamic probing. Kevin K. -----Original Message----- From: Jun Sun To: Dominic Sweetman Cc: linux-mips@fnet.fr ; linux@cthulhu.engr.sgi.com ; nigel@algor.co.uk Date: Saturday, July 01, 2000 3:29 AM Subject: Re: R5000 support (specifically two-way set-associative cache...) > >> Fundamentally: >> >> o "index" operations just go first through one set, then the other. >> So long as initialisation routines are applied to each possible >> index in turn, both sets get initialised. >> >> o "hit" operations "just work". >> >> So long as initialisation is done carefully (basic rule: perform one >> stage to the whole cache before going on to the next), run-time cache >> maintenance can and should be done with "hit" instructions, and you >> don't need to worry whether the CPU is direct mapped, 2- or 4-way set >> associative. >> >> (it's all explained in my book, "See MIPS Run", of course...) >> >> Even with the Vr5432 you only have to know the difference when first >> setting up the CPU. >> > >Not exactly - the current Linux/MIPS implementation uese index >operations to flush cache. >As a result flush_all_cache() does not really flush all cache. > > >> Dominic Sweetman >> Algorithmics Ltd > >Jun >> dom@algor.co.uk .