% \iffalse
% Copyright(c) 2001 by David Kastrup
% Any use of the code is permitted as long as this copyright notice is
% preserved in the code.
%
% In case of an emergency (no LaTeX available), you may rename this
% file to binhex.tex.  In all other cases, use the accompanying
% binhex.ins in order to extract binhex.drv (run LaTeX on it for
% getting the documentation) and binhex.tex.  If binhex.ins is
% missing, you can regenerate it by running docstrip on this file with
% the option ``installer'' set.
% \fi
% \CheckSum{251}
% \title{The \texttt{binhex.tex} package for expansible conversion
%        into binary-based number systems}
% \author{David Kastrup\thanks
%    {David.Kastrup@neuroinformatik.ruhr-uni-bochum.de}}
% \maketitle
% \tableofcontents
%
% \section{Usage}
% This is a file for expandably converting numbers into binary, octal
% and hexadecimal.  All constructs \TeX\ accepts as an argument to its
% |\number| primitive are valid.  This holds for all numeric arguments
% of the macros presented in here.
% 
% You use this package by simply inputting it with
% \begin{verbatim}
%\input binhex
% \end{verbatim}
% It will work equally well under \LaTeX\ and plain \TeX.  It does not
% even use plain \TeX, but only \TeX\ primitives.  Simply setting the
% correct |\catcode| values for |{}#| and end of line will make it
% load and work under ini\TeX.
% 
% The following macros are defined:
% \DescribeMacro{\binary}
% |\binary{|\meta{number}|}| will convert \meta{number} into its binary
% representation.
% \samples\binary{0}{\maxdimen}{-"7EE6}.
%
% \DescribeMacro{\nbinary}
% |\nbinary{|\meta{size}|}{|\meta{number}|}| will convert \meta{number}
% into a binary representation of at least \meta{size} digits length,
% filling up with leading zeros where necessary.  The |-| sign of
% negative numbers is not counted.  If both \meta{size} and
% \meta{number} are zero, an empty string is generated.  This should
% please some computer scientists in some situations.
% \samples{\nbinary{3}}{3}{-2}{-12}.
%
% \DescribeMacro{\hex}
% |\hex{|\meta{number}|}| converts \meta{number} into its hexadecimal
% representation, using uppercase letters.
% \samples\hex{34}{-4711}.
%
% \DescribeMacro{\nhex}
% |\nhex{|\meta{size}|}{|\meta{number}|}| will convert \meta{number}
% into a hexadecimal representation of at least \meta{size} digits length,
% filling up with leading zeros where necessary.  The |-| sign of
% negative numbers is not counted.  If both \meta{size} and
% \meta{number} are zero, an empty string is generated.  This should
% please some computer scientists in some situations.
% \samples{\nhex{3}}{3}{-\maxdimen}.
%
% \DescribeMacro{\oct}
% |\oct{|\meta{number}|}| converts \meta{number} into its octal
% representation.
% \samples\oct{34}{-4711}.
%
% \DescribeMacro{\noct}
% |\noct{|\meta{size}|}{|\meta{number}|}| will do the right thing.
% \samples{\noct{3}}{13}{-\maxdimen}.
%
% \DescribeMacro{\tetra}
% |\tetra{|\meta{number}|}| is for people counting with arms and legs
% instead of fingers, or for quadrupeds.
% \samples\tetra{34}{-4711}.
%
% \DescribeMacro{\ntetra}
% |\ntetra{|\meta{size}|}{|\meta{number}|}| is for those of the same
% count which have minimum requirements.
% \samples{\ntetra{3}}{3}{-\maxdimen}.
%
% \DescribeMacro{\nbinbased}
% |\nbinbased{|\meta{logbase}|}{|\meta{size}|}{|\meta{number}|}| will
% convert \meta{number} into number base $2^{\text{\meta{logbase}}}$ and
% generate at least \meta{size} digits.  Only supported values of
% \meta{logbase} are 1, 2, 3, 4.  This is called by all other macros
% except of the faster binary conversion macros.
% \samples{\nbinbased{3}{3}}{13}{-\maxdimen}.
% \samples{\nbinbased{2}{4}}{13}{-\maxdimen}.
% 
% That's it, have fun!
% \StopEventually{}
% \section{Implementation}
% Now the implementation.  First save catcode of |@| and old contents of
% |\toks0| in |\toks0|, then make |@| a letter to enable internal
% macros.
%    \begin{macrocode}
%<*style>
\edef\next{\toks0=%
   {\catcode`\noexpand\@=\the\catcode`\@\toks0{\the\toks0}}%
}
\next
\catcode`\@11
%    \end{macrocode}
% 
% \subsection{Binary conversions}
% \subsubsection{Basics}
% \begin{macro}{\bb@00}
% \begin{macro}{\bb@01}
% \begin{macro}{...}
% \begin{macro}{\bb@19}
% We now define the work horse macros for conversion of binary
% commands.  If numbers were allowed in macro names, one of those
% definitions would be
% \begin{verbatim}
%\def\bb@13#1{6\csname bb@1#1\endcsname}
% \end{verbatim}
% That is, the macro divides the decimal two-digit number (up to~19)
% embedded into its name by~2, spews out the result and starts up the
% next macro with the first digit of the name of \emph{that} being the
% remainder from its own division, and the second digit being the next
% following one.
%    \begin{macrocode}
\def\next#1#2#3{\expandafter \def \csname bb@#1\endcsname##1%
  {#2\csname bb@#3##1\endcsname}}
\next{00}00 \next{01}01 \next{02}10 \next{03}11
\next{04}20 \next{05}21 \next{06}30 \next{07}31
\next{08}40 \next{09}41 \next{10}50 \next{11}51
\next{12}60 \next{13}61 \next{14}70 \next{15}71
\next{16}80 \next{17}81 \next{18}90 \next{19}91
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \begin{macro}{\bb@0+}
% \begin{macro}{\bb@1+}
% Now we need to end such a conversion.  For no particular reason at
% all (well, some sneakiness might explain it later), we use |+| as an
% end marker for the decimal digits.  After the |+|, we collect the
% resulting binary digits, from last to first.  So here are two macros
% to deal with the last digit produced.  Simply tacks them on after
% replacing the gobbled |+|.
%    \begin{macrocode}
\expandafter \def \csname bb@0+\endcsname {+0}
\expandafter \def \csname bb@1+\endcsname {+1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% Now all that remains to be done is to initiate the process, and to
% end it again.  The process ends when the decimal number reaches~0.
% Since we want to produce one digit even when starting out, and we
% check the end of recursion by comparing the result with~|0|, we have a
% problem here.  We solve it by comparing two letters, and looking for
% the complete |0+| sequence, and we start out by prepending a trivial |0|
% before the number to convert, so that at the first run it will be |00|
% instead of |0| if the number in question is~0.
%
% \begin{macro}{(\binary)}
% \begin{macro}{(\bb@dobinary)}
% Actually, this is how we \emph{could} do things.  The actual, slightly
% different version used can be shared by the other converters, but
% we'll keep this listed for reference.
% \begin{verbatim}
%\def\binary#1{\expandafter \bb@dobinary \expandafter 0\number#1+}
%\def\bb@dobinary#1#2{\if0#1\if+#2\bb@endbinary \fi\fi
%    \expandafter \bb@dobinary \number \csname bb@0#1\endcsname #2}
% \end{verbatim}
% Notice that |\number| here serves multiple purposes.  It will
% initiate expansion that will only be stopped once the macros
% generating the next binary digit will crank out a space or anything
% else stopping expansion.  Its second purpose is to get rid of any
% leading zeros that might remain from the last loop through.
%
% \begin{macro}{\bb@endbinary}
%   |\bb@endbinary| can
% be used as written, though.  It scraps everything up to the tack
% mark |+|, leaving only the converted results accumulated behind
% that.  Since this means scrapping |\fi\fi| as well, it reinserts
% it in order to properly finish the conditional.
%    \begin{macrocode}
\def\bb@endbinary#1+{\fi\fi}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsubsection{Negative numbers} 
% We would like negative numbers to work, too.  The semantics for
% defined field widths are unclear (so we basically just tack a |-| on
% and convert the remaining number to the full width).  Since the sign
% of the number is easy to discern, further massaging of the number to
% replace leading zeros by spaces, insert |+| signs and similar folderol
% are easy to do and left as an exercise to the reader.  We mostly
% implement this to have the conversion not fail on any number.
% 
% \begin{macro}{\bb@0-}
% The following one-liner achieves that.  Figure out why.  It is easy.
%    \begin{macrocode}
\expandafter \def \csname bb@0-\endcsname {0+-\bb@dobinary}
%    \end{macrocode}
% \end{macro}
%
% \subsubsection{Minimum field widths}
% \begin{macro}{\bb@0m}
% \begin{macro}{\bb@1m}
% We often have the situation that we want to produce a number that is
% at least of a certain length.  We specify this by tagging on an
% appropriate number of |m| characters to the decimal as sort of a
% format string.  If we match such an~|m| at the end of the conversion,
% we produce a digit and remove one~|m|, leaving all other |m| intact (or
% whatever else happens to be before our |+| sign).
%    \begin{macrocode}
\expandafter\def\csname bb@0m\endcsname#1+{#1+0}
\expandafter\def\csname bb@1m\endcsname#1+{#1+1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{(\nbinary)}
% We call |\nbinary| with the number of digits as first argument, the number
% itself as second.
% 
% This now becomes trivial:
% \begin{verbatim}
%\def \nbinary#1#2{%
%   \binary{\number #2\romannumeral \number \number #1 000}%
%}
% \end{verbatim}
% 
% Whoa, what about all these calls of |\number|?  First notice the space
% after |#1|.  We need that in case |#1| happens to be octal or whatever,
% since the |000| at the end is supposed to multiply by 1000 \emph{decimal}.
% If |#1| were something like |'13| (11 decimal), the last |\number| will
% expand |'13|, the |\number| before that will remove the blank we
% inserted in case it was not needed to finish the number of digits,
% we multiply by~1000 and turn this into a roman numeral consisting of
% the appropriate amount of |m| letters.  The very first |\number| ensures
% that in case |#2| is a complete number without the need of trailing
% spaces, still |\romannumeral| will be expanded when |\binary| first sets
% sight on the whole thing.
% \end{macro}
%
% \begin{macro}{\nbinary}
% \begin{macro}{\binary}
% \begin{macro}{\bb@dobinary}
% Actually, since there is a certain logic to returning
% an empty string when 0 is to be converted into a number at least 0
% characters long, we redefine the stuff the other way round, |\binary|
% as a special case of |\nbinary|.  We check the end by testing against
% |0| followed by anything but~|m|.  This has reasons\dots
% 
%    \begin{macrocode}
\def\bb@dobinary#1#2{\if#10\if m\string#2\else\bb@endbinary\fi\fi
 \expandafter\bb@dobinary\number\csname bb@0#1\endcsname#2}
\def\nbinary#1#2{\expandafter\bb@dobinary\number\number#2%
 \romannumeral\number\number#1 000+}
\def\binary{\nbinary1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% 
% \subsection{Hexadecimal and the rest}
% 
% Ok, stop with the small fry.  Now we want to convert into
% hexadecimal and octal as well.  We do this by first converting into
% binary, then into the wanted base whenever enough binary digits have
% accumulated.  In the following, we will talk about hex digits
% exclusively for simplicity, even though they might indeed be octal
% instead.
% 
% \begin{macro}{\bb@h0}
% \begin{macro}{\bb@h1}
% \begin{macro}{\bb@h10}
% \begin{macro}{...}
% \begin{macro}{\bb@h1111}
% 
% The following defines the equivalents of
% \begin{verbatim}
%\def \bb@h110#1+{\bb@dohex #1+6}
% \end{verbatim}
% This is a macro that appends 6, the representation of the binary
% number in its name, after the tack mark |+|.  So what's with the
% |\number+|?  Actually, here it does nothing but disappear.  We just
% write this to remind us of how the macros will be called.  When the
% macros are called, we use the same construct, and then |\number|
% will disappear together with the~|+| (that we use as a tack mark)
% and take along any leading zeros.  We drop leading zeros so that we
% can share the conversion macros for hex and octal (and quaternary?)
% where they overlap.
% 
%    \begin{macrocode}
\def \next #1#2{\expandafter \def
 \csname bb@h\number +#1\endcsname ##1+{\bb@dohex ##1+#2}%
}
\next   {0}0 \next   {1}1 \next  {10}2 \next  {11}3
\next {100}4 \next {101}5 \next {110}6 \next {111}7
\next{1000}8 \next{1001}9 \next{1010}A \next{1011}B
\next{1100}C \next{1101}D \next{1110}E \next{1111}F
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\bb@dohex}
% |\bb@dohex| is the magic macro that initiates accumulation of enough
% binary digits for one hexadecimal one.  It is called in
% the following form:
% \begin{quote}
%   |\bb@dohex| \meta{m\{\#rhex\}} |\endcsname| \meta{m\{\#bin\}} |+|
% \end{quote}
% Where |+| is the tack after which hex digits will accumulate,
% \meta{m\{\#rhex\}} is a sequence of |m|, one for every remaining hex
% digit we want to force out (same convention as with |\nbinary| above),
% and \meta{m\{\#bin\}} is a sequence of |m| corresponding in length to
% the number of binary digits we need to accumulate for one hexadecimal
% (or octal) digit.
%    \begin{macrocode}
\def\bb@dohex #1{\csname bb@x#1\endcsname}
%    \end{macrocode}
% 
% Eeek! What is that?  Ok, let's split it into the two cases, one with
% forced digits remaining, one without any remaining forced digits.
% If no forced digits remain, we get
% \begin{quote}
% |\bb@x \endcsname \endcsname| \meta{m\{\#bin\}}
% \end{quote}
% \end{macro}
% 
% \begin{macro}{\bb@x}
% |\bb@x| is defined as
%    \begin{macrocode}
\def\bb@x\endcsname#1{ \bb@xm{m\endcsname}}
%    \end{macrocode}
% 
% Notice the space at the start of the macro!  It will stop
% expansion.  Furthermore, the |\endcsname| that |\bb@dohex| inserted is
% scrapped, as well as the first |m| from
% \meta{m\{\#bin\}}.\footnote{Why do we match |\string\endcsname| explicitly
%   for scrapping?  The answer is debugging.  We know it should always
%   be |\string\endcsname|, so let \TeX\ assert that it is indeed so.  But we
%   also know that the next character will be |m|, why don't we match
%   \emph{that} explicitly?  The answer is that we cannot be sure about the
%   |\string\catcode| of the matched~|m|.  A hand-entered |m| has
%   |\string\catcode|~11, a \TeX-generated one (with |\string\string| or
%   |\string\romannumeral| or such) has |\string\catcode|~12.  You'll
%   find that all the code here has been carefully 
%   designed so that it will not care which it gets, so we don't make
%   an exception here.
% }
% \end{macro}
% 
% \begin{macro}{\bb@xm}
% The argument fed to |\bb@xm| is part of some jiggery-pokery we want
% to happen when |\bb@dobinary| resumes expansion.  First, however, it
% will take a look and decide whether it will stop generating digits
% altogether.  As |\string \bb@xm| does not start with |m|, |\bb@dobinary|
% will stop expansion when the decimal to convert has shrunk to 0.
% Fine.  Now what does |\bb@xm| do?
%    \begin{macrocode}
\def\bb@xm #1\endcsname #2#3+{#2#3%
 \csname bb@h\number+\endcsname
 #1\endcsname m#3+}
%    \end{macrocode}
% \end{macro}
% 
% This is rather straightforward for the case of forced digits: the
% number of binary digits is encoded in the form of \meta{m\{\#bin\}} in
% |#2#3|.  After the conversion of those digits, the appropriate hex
% digit macro is called and sets up |\bb@dohex| again for the next hex
% digit.  Piece of cake.  Now what happens in the case we have resumed
% from |\do@binary| having had its option of stopping expansion?
% 
% In that case, we get called with the next \meta{digit}
% already arriving.  This looks more or less like
% \begin{quote}
%   |\csname bb@|\meta{digit}|\bb@xm \endcsname{m\endcsname}|
%   \meta{m\{\#bin-1\}}
% \end{quote}
% See what happens?  This expands |\bb@xm|, after which a command of the
% name |\bb@|\meta{digit}|m| (\meta{digit} being 0 or~1) gets executed.
% It stashes away \meta{digit} after
% the conveniently provided |+| sign, and \meta{\#bin-1} digits remain for
% conversion.
% 
% You think this contrived?  Well, buster, let me tell you that the
% previous version was way more insane.  Have it still in RCS.
% 
% \begin{macro}{\bb@nbinbased}
% The following macro needs to get |#1|, the decimal number to convert,
% in text form already.  This is so that |\number#1| will continue
% expanding after |#1|, expanding |\bb@dohex| exactly once.  This problem
% does not exist for the |\romannumeral| calls for |#2| and |#3|, so
% spurious expansion with |\number\number| does no harm, since it is
% stopped readily at the hard |\endcsname| and |+| thresholds.
%    \begin{macrocode}
\def\bb@nbinbased #1#2#3{\expandafter \bb@dobinary \number#1%
 \expandafter \bb@dohex
 \romannumeral \number\number #2 000\expandafter\endcsname
 \romannumeral \number\number #3 000+}
%    \end{macrocode}
% \end{macro}
%                                 
% \begin{macro}{\nbinbased}
% The following macro gets 3~arguments, the number of binary digits the
% output digits shall be based on, the number of digits to produce at
% least, and the number itself.  It expands the number into text
% form.  If the number is not space-terminated, the closing brace
% reliably stops expansion nevertheless, so that |\bb@nbinbased| gets a
% clean number.
%    \begin{macrocode}
\def\nbinbased #1#2#3{\expandafter\bb@nbinbased
 \expandafter {\number#3}{#2}{#1}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\nhex}
% \begin{macro}{\noct}
% \begin{macro}{\ntetra}
% \begin{macro}{\hex}
% \begin{macro}{\oct}
% \begin{macro}{\tetra}
% Now follow the obvious definitions:
%    \begin{macrocode}
\def\nhex{\nbinbased4}
\def\noct{\nbinbased3}
\def\ntetra{\nbinbased2}
\def\hex{\nhex1}
\def\oct{\noct1}
\def\tetra{\ntetra1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \subsection{The end}
% Restore |\catcode`\@| and |\toks0| and finish.
%    \begin{macrocode}
\the\toks0
%</style>
%    \end{macrocode}
% And that was that!
% \section{Various drivers}
% The installer, in case it is missing.
%    \begin{macrocode}
%<installer> \input docstrip
%<installer> \generate{
%<installer>    \file{binhex.drv}{\from{binhex.dtx}{driver}}
%<installer>    \usedir{tex/generic/misc}
%<installer>    \file{binhex.tex}{\from{binhex.dtx}{style}}
%<installer> }
%<installer> \endbatchfile
%    \end{macrocode}
% And here comes the documentation driver.
%    \begin{macrocode}
%<driver> \documentclass{ltxdoc}
%<driver> \usepackage{amsmath}
%<driver> \input binhex.tex
%    \end{macrocode}
% \begin{macro}{\verbatize}
% |\detokenize| is available in e\TeX, but we may not have that\dots
% The |\fontdimen| folderol makes spaces temporarily disabled.  Looks
% prettier.  Sorry for that.
%    \begin{macrocode}
%<driver> \def\verbatize#1{\begingroup
%<driver>    \toks0{#1}\edef\next{\the\toks0}%
%<driver>    \dimen0\the\fontdimen2\font
%<driver>    \fontdimen2\font=0pt
%<driver>    \expandafter\stripit
%<driver>    \meaning\next
%<driver>    \fontdimen2\font=\dimen0
%<driver>    \endgroup}
%<driver> \def\next{}
%<driver> \expandafter\def\expandafter\stripit\meaning\next{}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\showeffect}
% |\showeffect|\meta{Stuff} will put out a one-line correspondence of
% the verbatim source of \meta{Stuff} with its expansion, to be used
% in a |aligned| environment or similar.
%    \begin{macrocode}
%<driver> \newcommand\showeffect[1]{%
%<driver>     \text{\verbatize{#1}}\quad&\rightarrow\quad\text{#1}%
%<driver>     \\}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\samples}
% |\samples| gets one parameter, and a following expression list ended
% by a period.  It applies that parameter to each of the expressions
% in the list and generates a correspondance table for each.  For
% example,
% \begin{verbatim}
%\samples{\nbinary{3}}{3}{-2}{-12}.
% \end{verbatim}
% was used in this document to produce
% \samples{\nbinary{3}}{3}{-2}{-12}.
%    \begin{macrocode}
%<driver> \def\samples{\begingroup\MacroFont\[\begin{aligned}\nextsample}
%<driver> \def\nextsample#1#2{%
%<driver>     \if.\noexpand#2\expandafter\endsamples\fi
%<driver>     \showeffect{#1{#2}}\nextsample{#1}}
%<driver> \def\endsamples#1\nextsample#2{\end{aligned}\]\endgroup}
%    \end{macrocode}
% \end{macro}
% Now all that remains is inputting the stuff.
%    \begin{macrocode}
%<driver> \begin{document}
%<driver> \DocInput{binhex.dtx}
%<driver> \end{document}
%    \end{macrocode}
% \Finale{}
.
