\documentclass[11pt]{article} \usepackage[a4paper,margin=18mm]{geometry} \usepackage{tikzphysics} \pagestyle{empty} \begin{document} \section*{Percentage anchors and connected heat-transfer surfaces} \begin{center} \begin{tikzpicture}[>=latex,font=\small] \node[composite wall,rotate=20] (C) {}; \foreach \p in {0,50,100}{ \fill (C.interface-\p) circle (1.5pt); \node[right=3pt] at (C.interface-\p) {\p}; } \node[below=20pt] at (C.south) {Interface: bottom to top}; \node[radiating body,radiation ray length=.5cm] (R) at (7,0) {$T$}; \foreach \p/\pos in {0/above right,25/above right,50/above left,75/below right}{ \fill (R.rim-\p) circle (1.5pt); \node[\pos] at (R.rim-\p) {\p}; } \node at (7,-2) {Rim: counterclockwise from the right}; \end{tikzpicture} \end{center} \bigskip \begin{center} \begin{tikzpicture}[>=latex,font=\small] \node[conduction slab,conduction width=.6cm,conduction height=3cm] (B) {$T_b$}; \foreach \p in {20,50,80}{ \node[cooling fin,fin length=3cm,fin base height=.7cm,anchor=heat-left] (F\p) at (B.right-\p) {}; \draw[->] (F\p.axis-20)--(F\p.axis-60); } \node[below=12pt] at (B.south) {Three fins connected at percentage anchors on the base}; \end{tikzpicture} \end{center} The interface, radiating-body rim, and contact coordinates retain their direction and location under rotation. Fin placement uses physical boundaries rather than text padding or minimum-size settings. \clearpage \section*{Apparatus composition and contraction} \begin{center} \begin{tikzpicture}[>=latex,font=\small] \node[calorimeter,calorimeter width=4cm,calorimeter height=3.2cm,calorimeter level=.7] (C) {}; \node[thermometer,fill=white,anchor=bulb-center,thermometer level=.65] (T) at ($(C.liquid-center)+(.7,0)$) {}; \node at ($(C.liquid-center)+(-.5,0)$) {liquid}; \node[below=10pt] at (C.south) {Thermometer bulb placed in the calorimeter liquid}; \end{tikzpicture} \end{center} \bigskip \begin{center} \begin{tikzpicture}[>=latex,font=\small] \node[expansion rod,expansion rod length=5cm,thermal expansion ratio=.85,rotate=10] (R) {}; \foreach \p in {0,50,100}{ \fill (R.expanded-\p) circle (1.4pt); \node[above=3pt] at (R.expanded-\p) {\p}; } \node[right] at (R.expanded-end) {$0.85L$}; \node[right] at (R.original-end) {$L$}; \draw[densely dashed] (R.original-start)--(R.expanded-start); \end{tikzpicture} \end{center} Both rod families run left to right. A ratio below one illustrates contraction; it does not derive a coefficient of thermal expansion or a temperature change. The liquid level and thermometer column remain independent author inputs. \end{document} .