% Editable compositions corresponding to the supplied textbook references. \documentclass[11pt]{article} \usepackage[T1]{fontenc} \usepackage{fourier} \usepackage[a4paper,margin=18mm]{geometry} \usepackage{tikzphysics} \pagestyle{empty} \newcommand{\scene}[2]{\section*{#1}\begin{center}#2\end{center}} \begin{document} \scene{Hydrostatics: two liquids and hydraulic press}{ \begin{tikzpicture} \pic (U) {u tube diagram={fluid left level=.4,fluid right level=.64, fluid level=.86,fluid body label={Mercury},fluid left label={Water}, every fluid liquid/.style={fill=gray!50}, every fluid secondary liquid/.style={fill=gray!15}}}; \draw[every fluid dimension] (U-interface -| 1,0)--(U-upper-surface -| 1,0) node[midway,left] {$15.0\,\mathrm{cm}$}; \draw[dashed] (U-upper-surface)--++(2,0); \draw[every fluid dimension] (2.5,3.44)--(2.5,2.56) node[midway,right] {$h$}; \pic (H) at (6,0) {hydraulic press={fluid body label={$600\,\mathrm{kg}$}}}; \draw[every fluid dimension] (8.8,1.4)--(8.8,2.8) node[midway,left] {$8\,\mathrm{m}$}; \end{tikzpicture}} \scene{Accelerating vessels}{ \begin{tikzpicture} \pic (A) {fluid tank diagram}; \pic (B) at (6,0) {fluid tank diagram={fluid left level=.85,fluid right level=.55}}; \foreach \n in {A,B}{\draw[every fluid arrow,->] (\n-origin)--++(3.8,0) node[right] {$x$}; \draw[every fluid arrow,->] (\n-origin)--++(0,3.5) node[above] {$y$};} \draw[every fluid arrow,->] (9.5,1.5)--++(.9,0) node[right] {$a_x$}; \draw[every fluid arrow,->] (9.5,1.5)--++(0,.9) node[above] {$a_y$}; \end{tikzpicture}} \scene{Pressure balance in an accelerating liquid}{ \begin{tikzpicture} \pic (T) {fluid tank diagram={fluid left level=.85,fluid right level=.55}}; \pic (E) at (.8,.65) {pressure element diagram={fluid width=1.4cm, fluid left label={$p$},fluid right label={$p+dp$}}}; \pic (F) at (6,.65) {pressure element diagram}; \draw[every fluid arrow,->,dashed] (6.5,-.3)--++(1,0) node[right] {$a_x$}; \end{tikzpicture}} \newpage \scene{Rotation}{\begin{tikzpicture} \pic (R) {rotating tube}; \pic (V) at (7,-1) {rotating fluid diagram}; \end{tikzpicture}} \scene{Wetting and non-wetting contact angles}{\begin{tikzpicture} \pic (W) {meniscus diagram}; \pic (N) at (4,0) {meniscus diagram={fluid bend=-.15}}; \node[below=4mm] at (W-bottom) {$\theta<90^\circ$}; \node[below=4mm] at (N-bottom) {$\theta>90^\circ$}; \end{tikzpicture}} \scene{Capillary rise and surface tension}{\begin{tikzpicture} \pic (C) {capillary}; \pic (R) at (7,1.2) {surface tension ring}; % Add horizontal components with ordinary TikZ paths. \draw[every fluid arrow,->] (C-contact-left)--++(-.8,0) node[left] {$T\sin\theta$}; \draw[every fluid arrow,->] (C-contact-right)--++(.8,0) node[right] {$T\sin\theta$}; \end{tikzpicture}} \newpage \scene{Gas pressure and cylindrical column}{\begin{tikzpicture} \pic (G) {gas manometer}; \pic (C) at (5,0) {fluid cylinder diagram={every fluid liquid/.style={pattern=dots}}}; \end{tikzpicture}} \scene{Buoyancy and continuity}{\begin{tikzpicture} \pic (B) {buoyancy}; \pic (F) at (5,1) {flow tube diagram}; \end{tikzpicture}} \scene{Liquid in an annular tube}{\begin{tikzpicture} \pic (L) {liquid ring diagram={every fluid liquid/.style={fill=gray!55}}}; % A second liquid sector is an ordinary native annular path. \begin{scope}[shift={(L-center)}] \path[pattern=dots] (295:1.75) arc[start angle=295,end angle=385,radius=1.75] --(25:1.35) arc[start angle=25,end angle=-65,radius=1.35]--cycle; \end{scope} \end{tikzpicture}} \end{document} .