% \iffalse meta-comment
%
% Copyright (C) 2012 by Ferdinand Schwenk (me@nerdifand.de).
% Copyright (C) 2012 by Benjamin Berg (benjamin@sipsolutions.net).
%
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
% version 1.3c of this license or (at your option) any later
% version. The latest version of this license is available at
% http://www.latex-project.org/lppl/.
%
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{tikzinclude.dtx}
%</driver>
%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<package>\ProvidesPackage{tikzinclude}
%<*package>
    [2012/22/02 v1.0 package for including only a specified tikz pictures from a file]
%</package>
%
%<*driver>
\documentclass[a4paper]{ltxdoc}
\usepackage{tikzinclude}[2012/12/23]
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\begin{document}
  \DocInput{tikzinclude.dtx}
  \PrintChanges
  \PrintIndex
\end{document}
%</driver>
% \fi
%
% \CheckSum{70}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
%
% \changes{v1.0}{2012/12/23}{Initial version}
%
% \GetFileInfo{tikzinclude.dtx}
%
% \title{The \textsf{tikzinclude} package\thanks{This document
%   corresponds to \textsf{tikzinclude}~\fileversion, dated \filedate.}}
% \author{Ferdinand Schwenk \texttt{me@nerdifand.de} \and
%         Benjamin Berg \texttt{benjamin@sipsolutions.net}}
%
% \maketitle
%
% \begin{abstract}
%   This package addresses the problem of importing only one TikZ-image from
%   a file holding multiple images (i.e. different versions of the same picture).
% \end{abstract}
%
% \section{Introduction}
% Normaly I use one file per TikZ-image. This simplifies reusage of the images in
% different documents.
%
% When drawing different versions of the same image, for example to highlight
% parts of the image or provide localized versions, it is not practical to put
% each of the version in a separate file. Doing this would increase the risk
% of version mismatch.
%
% Because of this it can make sense to have all versions of one image or even
% different images inside the same source file. However, simply doing this
% makes it impossible to use the |\input| command as this would insert all
% images at the same time. This package solves the issue by allowing the user
% to only insert a single tikzpicture from a file.
%
% \section{Usage}
%
% To be able to select an image it necessary to name each drawing. This is done
% by assigning a figure name to the TikZ-Key |/tikzinclude/figure| at the
% beginning of the picture.
%
% \begin{verbatim}
%   \begin{tikzpicture}[/tikzinclude/figure=foo]
%     \node{foo};
%   \end{tikzpicture}
% \end{verbatim}
%
% \DescribeMacro{\includetikzgraphics}
% After naming the images it is now possible to only include a specific image
% using the |\includetikzgraphics|\oarg{name}\marg{imagefile} command.\\
% \meta{name} is the name of the image that should be included. If \meta{name}
% is provided then only the picture with the given name is included, all other
% pictures are dropped.
% If \meta{name} is omitted all pictures in \meta{imagefile} are included. This
% gives the same result as if |\input| was used.\\
%
% \StopEventually{}
%
% \section{Implementation}
%
% The Package is depending on |ifthen| and |etoolbox|
%    \begin{macrocode}
\RequirePackage{tikz}
\RequirePackage{ifthen}
\RequirePackage{etoolbox}
%    \end{macrocode}
%
% Provide a new if condition that states if tikzinclude should be active or if
% all pictures should be included.
%    \begin{macrocode}
\newif\if@tikzinclude@active\@tikzinclude@activefalse
%    \end{macrocode}
%
% Store the original definition of |\pgfsys@typesetpicturebox|
%    \begin{macrocode}
\let\@tikzinclude@typsetpicturebox\pgfsys@typesetpicturebox
%    \end{macrocode}
%
% \begin{macro}{\@tikzinclude@picture@started}
% This internal macro sets |\par| to its original definition, if tikzinclude is
% used. Otherwise it should not have been changed.
%    \begin{macrocode}
\newcommand{\@tikzinclude@picture@started}{%
  \if@tikzinclude@active%
    \let\par\@tikzinclude@par%
  \fi%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@tikzinclude@picture@ended}
% This internal macro overwrites |\pgfsys@typesetpicturebox| with a macro that
% drops the next box entirely and then resets the definition of
% |\pgfsys@typesetpicturebox|. The overwrite only happens if the image should
% be suppressed.
%    \begin{macrocode}
\newcommand{\@tikzinclude@picture@ended}{%
  \if@tikzinclude@active%
    \ifthenelse{%
      \equal{\pgfkeysvalueof{/tikzinclude/figure}}{\pgfkeysvalueof{/tikzinclude/select}}%
    }%
    {}%
    {%
      \global\def\pgfsys@typesetpicturebox##1{%
        \global\let\pgfsys@typesetpicturebox\@tikzinclude@typsetpicturebox%
      }%
    }%
  \fi%
}
%    \end{macrocode}
% \end{macro}
%
% Some hooks need to be installed.
%    \begin{macrocode}
\BeforeBeginEnvironment{tikzpicture}{\if@tikzinclude@active%
  \whileboolexpr{test{\ifdimgreater{\lastskip}{0pt}}}{\unskip}\fi}%
  \AtBeginEnvironment{tikzpicture}{\@tikzinclude@picture@started%
}
\AtEndEnvironment{tikzpicture}{\@tikzinclude@picture@ended}
\AfterEndEnvironment{tikzpicture}{\ignorespaces}
%    \end{macrocode}
%
% Set the TikZ-Keys to empty values. This is necessary to suppress some
% TikZ-warnings
%    \begin{macrocode}
\pgfkeyssetvalue{/tikzinclude/figure}{}
\pgfkeyssetvalue{/tikzinclude/select}{}
%    \end{macrocode}
%
% \begin{macro}{\includetikzgraphics}
% First it is checked if \meta{name} is provided or not. If no name is given a
% simple |\input| is performed.\\
% If \meta{name} is given it needs to be assigned to |/tikzinclude/select|.
% Any whitespace in the image file needs to be ignored, but whitespace inside
% the images should be unchanged. Therefore the definition of |\par| is stored
% and |\par| is overridden outside of any TikZ-environment.\par
% Then tikzinclude is activated and the image file is included using the |\input|
% command.
% After the picture is included some additional whitespace needs to be erased.
% To have a defined starting position and to avoid the deletion of whitespace
% added by the user a 0pt kerning is inserted prior to the inclusion of the
% image file.\\
% The whitespace that needs to be removed is caused by newlines at the end
% of TikZ-environments.\par
% In the end all settings are restored.
%    \begin{macrocode}
\newcommand\includetikzgraphics[2][]{%
  \begingroup%
    \ifthenelse{\equal{#1}{}}%
    {%
      \input{#2}%
    }%
    {%
      \let\@tikzinclude@par\par%
      \def\par{}%
      \pgfkeyssetvalue{/tikzinclude/select}{#1}%
      \@tikzinclude@activetrue%
      \kern0pt\input{#2}%
      \whileboolexpr{test{\ifdimgreater{\lastskip}{0pt}}}{\unskip}%
      \@tikzinclude@activefalse%
      \let\par\@tikzinclude@par%
    }%
  \endgroup%
}
%    \end{macrocode}
% \end{macro}
%
% \Finale
\endinput


.
