Return-Path: owner-LDP-L@cornell.edu Received: from listproc.mail.cornell.edu (LISTPROC.MAIL.CORNELL.EDU [132.236.56.14]) by keos.Helsinki.FI (8.6.9/H46) with SMTP id WAA17890 for ; Sun, 11 Dec 1994 22:10:55 +0200 Received: from host ([127.0.0.1]) by listproc.mail.cornell.edu with SMTP id <97900-3>; Sun, 11 Dec 1994 15:00:48 -0500 Received: from cornell.edu ([132.236.56.6]) by listproc.mail.cornell.edu with SMTP id <108493-4>; Sun, 11 Dec 1994 15:00:35 -0500 Received: from cornell.edu (PHQUERY) by cornell.edu with cornell-phquery id <372897-9>; Sun, 11 Dec 1994 15:00:25 -0500 Received: from burdell.cc.gatech.edu ([130.207.3.207]) by cornell.edu with SMTP id <372885-9>; Sun, 11 Dec 1994 15:00:01 -0500 Received: from forge.cc.gatech.edu (gregh@forge.cc.gatech.edu [130.207.9.19]) by burdell.cc.gatech.edu (8.6.9/8.6.9) with ESMTP id OAA11669 for ; Sun, 11 Dec 1994 14:59:59 -0500 Received: (from gregh@localhost) by forge.cc.gatech.edu (8.6.9/8.6.9) id OAA21476 for LDP-L@cornell.edu; Sun, 11 Dec 1994 14:59:57 -0500 Message-Id: <199412111959.OAA21476@forge.cc.gatech.edu> Date: Sun, 11 Dec 1994 14:59:57 -0500 Reply-To: LDP-L@cornell.edu Sender: owner-LDP-L@cornell.edu From: gregh@cc.gatech.edu (Greg Hankins) To: Linux Documentation Project writers Subject: Re: Some comments In-Reply-To: <9412111617.AA11897@thokk.cs.cornell.edu> from "Matt Welsh" at Dec 11, 94 11:17:58 am Content-Type: text X-PH: V4.1@cornell.edu (Cornell Modified) X-Mailer: ELM [version 2.4 PL23] X-Listprocessor-Version: 7.1 -- ListProcessor by CREN Content-Length: 3513 Status: RO X-Status: Matt Welsh writes: >I don't think I've ever received an abusive comment about my HOWTOs >or the HOWTOs in general. Can those of you who have had problems give >some specific examples? In most cases people can get frustrated if your >answers don't work for them (for whatever reason; either you have made a >mistake or they're not doing something right). Well, I already told everyone about the guy I've been abused by, but here is an article he posted. Unfortunately, I don't have the original, or the one entitled "Flame - curse on HOWTOs" (or somthing like that). In <33r9ba$m7@hamilton.maths.tcd.ie> tim@maths.tcd.ie (Timothy Murphy) writes: >gregh@cc.gatech.edu (Greg Hankins) writes: >>I'm going to stand by my decision about using getty_ps as the recommended >>getty in the Serial-HOWTO. I have listed mgetty as an alternative getty, >>and I have noted it's FAX handling capabilities. > >(1) I am only concerned with an appopriate getty for dialling in and out. >(2) Anybody intending to do this who follows the advice >in the Serial-HOWTO is going to waste a lot of time. >Out of 14 people who wrote to me, only 3 succeeded; >and all 3 had made considerable modifications >to the setup described in the HOWTO. >(3) By contrast, several people told me that mgetty worked >"out of the box". >(4) mgetty is well-documented, with a proper texinfo manual. >getty_ps is not well-documented. >(5) If my experience is reasonably typical, >then people should be told that they are likely to meet problems >if they try to use getty (= getty_ps) for dialling in and out. >(6) I have been told at length that HOWTO authors are open to reason, >and will modify their documents in response to suggestions. >Unfortunately I have not found this to be the case. >>If you have something positive to contribute to the Serial-HOWTO, I will >>be more that happy to work something out with you. I'm always on the >>lookout for more information and other alternatives. >Well, I made the suggestion above to you some time ago. [ the suggestion follow below...] >I'd be interested to know if you have successfully >followed your own advice in the HOWTO for dialling in and out? >Or are you just taking it on hearsay? >-- >Timothy Murphy >e-mail: tim@maths.tcd.ie >tel: +353-1-2842366 >s-mail: School of Mathematics, Trinity College, Dublin 2, Ireland Subject: Linux serial-HOWTO To: gregh@cc.gatech.edu Date: Mon, 2 May 1994 16:29:02 (BST) From: Timothy Murphy I'm writing about section 5 of the HOWTO, howto dial in and out. I don't believe that the setup described by you would allow dialling in and out, certainly with my ZyXEL U-1496E modem. Have you actually tried it? If so, could you please send me your /etc/defaults file. In my view, after considerable correspondence, it is much better to use mgetty if you want to dial in and out at random. I am not convinced that anyone has this working with getty_ps. Timothy Murphy ---- The above email was more or less his 'suggestion', stated several times in various USENET articles and also via several email messages. I don't really care, except that it generates a lot of negative energy. Oh well. Greg -- "Wenn ist das Nunstuck git und Slotermeyer? | Greg Hankins (gregh@cc.gatech.edu) Ja! Beiherhund das Oder die Flipperwaldt | Georgia Tech College of Computing, gersput!" - World's Funniest Joke | Computing and Networking Services Greg Hankins .