Return-Path: owner-LDP-L@cornell.edu Received: from listproc.mail.cornell.edu (LISTPROC.MAIL.CORNELL.EDU [132.236.56.14]) by keos.Helsinki.FI (8.6.9/H46) with SMTP id JAA06858 for ; Fri, 18 Nov 1994 09:45:27 +0200 Received: from host ([127.0.0.1]) by listproc.mail.cornell.edu with SMTP id <93518-5>; Fri, 18 Nov 1994 02:39:34 -0500 Received: from cornell.edu ([132.236.56.6]) by listproc.mail.cornell.edu with SMTP id <91708-2>; Fri, 18 Nov 1994 01:03:28 -0500 Received: from cornell.edu (PHQUERY) by cornell.edu with cornell-phquery id <372770-6>; Fri, 18 Nov 1994 01:03:17 -0500 Received: from rasty.anu.edu.au ([150.203.15.214]) by cornell.edu with SMTP id <372778-7>; Fri, 18 Nov 1994 01:02:54 -0500 Received: by rasty.anu.edu.au id AA00973 (5.67b/IDA-1.4.4 for LDP-L@cornell.edu); Fri, 18 Nov 1994 16:59:20 +1100 Message-Id: <199411180559.AA00973@rasty.anu.edu.au> Date: Fri, 18 Nov 1994 01:59:19 -0500 Reply-To: LDP-L@cornell.edu Sender: owner-LDP-L@cornell.edu From: Paul Gortmaker To: Linux Documentation Project writers Subject: Re: Some comments In-Reply-To: <199411180509.QAA02199@extro.ucc.su.OZ.AU> from "Terry Dawson" at Nov 18, 94 00:09:08 am Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit X-PH: V4.1@cornell.edu (Cornell Modified) X-Mailer: ELM [version 2.4 PL17] X-Listprocessor-Version: 7.1 -- ListProcessor by CREN Content-Length: 2449 Status: RO X-Status: A > > > > Folks, you MUST format your SGML HOWTOs and run > > LaTeX/nroff/etc. on them before sending them to me. > > I don't have the disk space to install LaTex. > > I'd still like to see the whole sunsite archive-HOWTO update process automated. > I imagine something like deliver or some other mail processing tool > sitting on sunsite somewhere so that authors can mail their HOWTO's to > an address at sunsite, their address be checked against a known list of E-mail addresses are too easy to fake. Automation is nice, but there has to be a certain amount of intervention to make sure things are cool. Terry, if disk space is a problem, you can send me your .sgml source when you are done editing it, and I will feed it through LaTeX and see if it breaks. If it doesn't break, I will mail you back a postcript (or dvi -- whichever you like) so you can view it and give it a final check. If it breaks, I will try and fix it, and tell you where it dies. (I seem like the logical choice, seeing as I am living on the same chunk of dirt as you are ;-) Then perhaps we should all upload a gzipped tar file to sunsite with all the formats (text via nroff, ps via LaTeX, and html) included. Then Matt can do a "cd /home/ftp/pub/linux/doc/howto;tar -xzf a-howto.tar.gz" and he is not plagued with all these pedantic errors that show up when using different formats. As for posting, I am going to start posting the Ethernet-Howto to the following groups myself, simply because I think it has a prospective audience there: comp.dcoms.lan.ethernet comp.sys.ibm.pc.hardware.networking comp.os.linux.help comp.os.linux.admin aus.computers.linux (for the local mob ;-) Since the Howtos cover such a broad range of topics, the posting should (probably) be left to the author(s). Perhaps an occasional post to comp.os.linux.announce with a summary of the recent changes (like Ian Jackson's summary of the changes to the Linux FAQ) that you have made to the Howto wouldn't annoy Matt too much. (or Lars, assuming that he is still doing approvals :-) Just my $0.02 (at an exchange rate of $0.74 USD) Paul. --------------------------------------------------------------------------- Paul Gortmaker - Department of Electronics Materials Engineering, c/o The Research School of Physical Sciences and Engineering, The Australian National University, Canberra ACT, 0020. Ph (06) 249 0374 Fax: (06) 249 0511 E-mail: paul@rasty.anu.edu.au .