Posts by MissBehave@mastodon.online
 (DIR) Post #AF8AxWcNz3LMocpk7E by MissBehave@mastodon.online
       2022-01-05T13:04:45Z
       
       0 likes, 0 repeats
       
       @avalosI agree that criticising is necessary, but boycott seems no good idea.However, does your "crypto sucks" go out to every currency? What do you think about  MobileCoin (the cryptocurrency that @signalapp has integrated in some countries): anonymous and far less energy consuming as they say? https://mobilecoin.com/
       
 (DIR) Post #ASbhMgN7wmyfO7GwWe by MissBehave@mastodon.online
       2023-02-12T15:11:46Z
       
       0 likes, 0 repeats
       
       @JF does anyone get the #Pinetime connected to the #librem5 ? my #librem does not find it....maybe that changes with the new WiFi-Card? https://puri.sm/posts/shipping-new-sparklan-wifi-cards-with-librem-5/
       
 (DIR) Post #ASdCSA4oE1pyhSkyVU by MissBehave@mastodon.online
       2023-02-13T08:34:52Z
       
       1 likes, 0 repeats
       
       @joao great to hear, thanks for your answer (and for your&purisms work!) may i throw in another question: do you by any chance know if the rather bad GPS is a software thing (and will improve over time) or a hardware thing? right now, outside of big cities it is very inaccurate and takes long to even "find" the device. Thx again in advance!
       
 (DIR) Post #AU0CmInWTBuvR5cOhs by MissBehave@mastodon.online
       2023-03-26T08:33:18Z
       
       0 likes, 0 repeats
       
       @leimon @JF my new wifi-card arrived  and did indeed solve the problem wit the #pinetime!:)
       
 (DIR) Post #AYkWIRC0mvOBvNP9ZQ by MissBehave@mastodon.online
       2023-08-14T21:08:27Z
       
       0 likes, 1 repeats
       
       Dear #Librem5 Community,i broke the Screen of my Librem5 which i have been daliy driving since 8 Month now. So i will order a #replacement screen from #purism ( which cost 150$, if anybody is also interested).Did anybody already replaced the screen or knows any source with information how to do it? the "disassemble video" from purism does not go that far: https://youtu.be/NWQW9bmwHBo Thanks in advance for any tip and #help 🙂️
       
 (DIR) Post #AbSl6g6iFsrySjWPNw by MissBehave@mastodon.online
       2023-11-04T10:51:07Z
       
       0 likes, 0 repeats
       
       @Shredd_Tone @linmob So, i finally tried out changing the screen. In total (also the journey is not completley finish), i would say it was an interesting adventure, however in the end i failed to a high degree😅 Here is what happened:1) @purism sended me a whole new frame (see picture, the lower frame is the new one). That means, you do not dissolve the screen and clue a new one to it. Instead you take the innards out of your old phone/frame and operate them into your new one. #Librem5
       
 (DIR) Post #AbSl6gvPDPQ2zxEtOq by MissBehave@mastodon.online
       2023-11-04T11:04:52Z
       
       0 likes, 0 repeats
       
       @Shredd_Tone @linmob @purism 2) For doing that, the Purism Video about Dissassembling the  #Librem5  is very helpful. However, the video stops after taking out the Main PCB. For completely switching, you still need to take out the lower part of the phone, where the lower microphone is positioned and where the charger docks (see picture, red circle). For that part, you are on your own without video assistance. It would be nice if Purism could put up a complete video of disassembling.  #linux
       
 (DIR) Post #AbSl6hemUhiPGgT87s by MissBehave@mastodon.online
       2023-11-04T11:19:26Z
       
       0 likes, 0 repeats
       
       @Shredd_Tone @linmob @purism 3) So the first thing you have to do is take of the black cover on the lower end, so that you see the green board (see picture1, red circle). Then you take out the board. So far, it is only a few screws.3) Then you have to take of the black "badge" which is clued on the ground of the phone (see picture2, red circle). You can peel that of with your hand. But attention! You need it for your new frame, since there is no badge delivered with it. #linux  #librem5
       
 (DIR) Post #AbSl6iIU75TTFp2q0m by MissBehave@mastodon.online
       2023-11-04T11:25:08Z
       
       0 likes, 0 repeats
       
       @Shredd_Tone @linmob @purism 4) In the last step, you need to take out the cooper (?) cable (see picture, red circle). It is also clued to the ground but you can peel it of carefully.5) Then your done disassembling and can start reassembling the new frame💪 However, during disassembly three mistakes happened to me:1) The GPS-Module broke of😬 In the video it is stated that you have to be very careful and, well, i can confirm that. Disassembling went well, reassembling did not...
       
 (DIR) Post #AbSl6j2vKQcZZqlvOa by MissBehave@mastodon.online
       2023-11-04T11:28:53Z
       
       0 likes, 0 repeats
       
       @Shredd_Tone @linmob @purism 2) Somehow i put one of the cables for the WLAN-Module not completely correct back in - at least in the end, when everything was reassembled, it was not long enough to be connected to the module. That means: Everything has to be taken out again to the level of the cables🤨 #linuxmobile  #librem5
       
 (DIR) Post #AbSl6juS7PRIFrofpY by MissBehave@mastodon.online
       2023-11-04T11:36:39Z
       
       0 likes, 0 repeats
       
       3) And the biggest problem: I could turn the phone with its new screen back on in the end - also momentarily without GPS and WLAN - but: It is not charging! Somewhere down in the inner guts of the phone something must have went wrong...maybe i connected something not correct, maybe i damaged the cooper cable while peeling it of🤷‍♂️ Result:I will trying to fix those thing (soldering the GPS, buying a new cable and look if i find something for the charging-problem).#linuxmobile  #linux#librem5
       
 (DIR) Post #AbSl6kkYzf7grUCI3U by MissBehave@mastodon.online
       2023-11-04T11:42:39Z
       
       0 likes, 0 repeats
       
       However, i do not bet on me getting it full functional again. So, unless your a pro or very confident in assembling phones, it might be the more secure way to send your phone in an let #purism do the screen-change.Wishes:It might be helpful, if a more detailed (dis)assembling video is put online: How do you exactly take the main PCB out (and back in) without breaking the GPS? How to put the cables exactly? #linuxmobile #librem5
       
 (DIR) Post #AbSl6lZbvrxLPo53ce by MissBehave@mastodon.online
       2023-11-04T11:49:21Z
       
       0 likes, 0 repeats
       
       And of course: Show the whole disassembling, including the lower board and the cooper cables. And do you need special clue for the later one?...etc...etc.Nevertheless, it was fun and i learned a lot during the process (never did something like this before). And luckily i have a second functioning(!) #Librem5  which i can use as my daily driver😅 I hope the #Linuxphone  world keeps expanding so that one day "normal" repair shops can do that stuff for you;)#linuxmobile
       
 (DIR) Post #AbUVirBWJ8CMs9sCXo by MissBehave@mastodon.online
       2023-11-05T08:47:17Z
       
       0 likes, 0 repeats
       
       @chrichri Hi, thx. i am not active on the forum, however feel free to use every information you think  is helpful!:)
       
 (DIR) Post #AkWoZJrCNhSjEoX1E0 by MissBehave@mastodon.online
       2024-08-01T16:16:41Z
       
       0 likes, 0 repeats
       
       @peertube Cool! I use a #linuxmobile smartphone. Is there a peertube-app for linux which i can use? #cuttlefish does not seem to be under active development....
       
 (DIR) Post #AyKIfILlUUQti8sfQ0 by MissBehave@mastodon.online
       2025-09-17T07:53:39Z
       
       0 likes, 0 repeats
       
       @opensourceopenmind @okias @piggo i think it might be a better way to push alternative Banks like the @glsbank to develop a Linux-Banking App one day;) I mean, it does not need to be for #Linuxmobile but for Linux in general (adaptable, though), right?