Subj : Re: GMRS
To   : Robert Wolfe
From : Bill Smith
Date : Wed Nov 04 2026 09:23 pm

-=> Robert Wolfe wrote to Jason Brady <=-


 RW> I have not been able to down;load CHIRP so I wrote my own
 RW> progframmer that uses CSV file data to program my UV-5R.  i AM NOT
 RW> JUST SURE HOW TO GO ABOUT PROGRAMMING MY RADIOS MANUALLY, SUYCH ASA
 RW> SETTINGS LIKE ctcs, ETC.

Once you've done it a few times, it's not hard, but it is still
time-consuming, and that makes it a pain.

On my UV-5X3, this is how I can manually change settings for the radio:

1. Press the Menu button to get into the menu
2. Use the Up/Down buttons to get to the item you want to modify
3. Press Menu button.  If you have the volume up, you will hear the name
   of the item you selected
4. Use the Up/Down buttons to change the value, scrolling through the
   available options
5. Press Menu again when you have the value you want
6. Rinse/repeat Steps 2 through 5 for any other menu items
7. When done, leave the radio alone and it will time out of Menu mode

If that's not what you were wondering about, I apologize for the
misunderstanding.

73 de K1PXF
Bill Smith
VB VA USA


.... I am of two minds: one is lost, the other is out looking for it.
___ MultiMail/Linux v0.52

--- Mystic BBS/QWK v1.12 A48 (Linux/64)
 * Origin: Classic Computing BBS (bbs.classiccomputing.net) (1:153/151)

.