Subj : Re: GMRS
To   : Robert Wolfe
From : Jason Brady
Date : Sat Aug 29 2026 07:47 pm

  RW> Actually, it is.  It is:  https://mygmrs.com/repeater/9220

Near Niagara Falls! Visited a couple of years ago. Pretty amazing place 
although the parking garage was a bit sketchy.

 That repeater uses transmit tone 203.5 and receive tone 203.5. You don't need 
the receive tone unless there are other repeaters on the same frequency and you 
don't want to hear both of them at the same time. Let's assume you can ignore 
the receive tone. In this case I recommend the following settings (for CHIRP 
but other software is very similar):

Loc        Memory channel number
Frequency  462.550000
Name       Escarp550 (or whatever you want to call it)
Tone Mode  Tone (transmit tone only)
Tone       203.5
Duplex     +
Offset     5.000000
Mode       FM
Power      High

In CHIRP if you want to apply both transmit and receive tones, set Tone Mode to 
TSQL, Tone to transmit tone and ToneSQL to receive tone.

Let me know how it goes!

73,
Jason KO6IOJ and WSHL413

--- FMMS / OpenVMS AXP 8.4-2L1
 * Origin: Shady Labs (1:218/910)

.