Subj : Re: UPS homelab setup
To   : Kurt Weiske
From : Mark Hofmann
Date : Sat Oct 01 2022 09:41:01

KW> With my current Proxmox + Synology + router setup, I get around 65
KW> minutes of run time -- that's with two printers plugged into the UPS
KW> because I just plugged the UPS from the wall into the UPS.

Wow, that is decent runtime but the load is way less than my setup.  I have (2) APC 1000s going to each of my SuperMicro servers - one to each power supply.  I get around 15-20 minutes of runtime, which is pretty good considering these use around 350 watts on average at least.  

My workstation is a power hog since I have (5) GPUs on it.  I have an APC 1000 and APC 1500 on it and get around 10 minutes runtime.  The 5 displays are on the APC 1000 and the PC is on the 1500.  The PC uses around 850 watts on average - which is more than both my Supermicros use added together even with 30 hard drives in the one.

- Mark

--- WWIVToss v.1.52 
 * Origin:  http://www.weather-station.org * Bel Air, MD -USA (618:100/12.0)

.