Subj : USB Version of a specific port?
To   : Jas Hud
From : Shurato
Date : Mon May 13 2024 13:46:00

 JH> To: Shurato
 JH> Re: USB Version of a specific port? By: Shurato to Jas Hud on Sat May
 JH> 11 2024 10:28 pm

 JH> >  > you can physically examine the hardware and look it up.

 JH> > Yeah, all the hardware and docs show 3.0 or higher, but I'm only
 JH> getting
 JH> > 1Mbps, plus the ports are blue with the proper number of connectors.
 JH> My
 JH> > HDDS running off of USB operate at the proper speed (1.1Gb/s or so) on
 JH> the
 JH> > same port. This is my second hub from different manufacturers and I
 JH> spent
 JH> > quite a bit more on this one.

 JH> no i mean actually look at the board and see what you can see.

 JH> but it's apparently some cheap hub so there ya go.

I had an anker 3.0 4 port hub ($19), now I have an RSH 7 port hub ($45).  It
provides the proper speed with my HDDs, I don't have a USB SSD to test.  For
USB thumb drives, I get the same speed I get plugging straight into my
motherboard (MSI MAG Z590 Tomahawk) 130MB/s read, 13MB/s write.  They're rated
at 550MB/s read and write...  I don't know if it's the motherboard, or just
real world performance.  So, it's not the hub.  Thanks for all the trouble
shooting help though, to all of you.

--
Shurato, Sysop Shurato's Heavenly Sphere (ssh, telnet, pop3, ftp,nntp,
,wss) (Ports 22,23,110,21,119,8080) (ssh login 'bbs' pass 'shsbbs').


*** THE READER V4.50 [freeware]
---
 * Origin: Shurato's Heavenly Sphere telnet://shsbbs.net (618:300/50)

.