Subj : Setting up the board on D
To   : Sean Dennis
From : Kevin Nunn
Date : Thu Aug 01 2019 16:56:25

-=> SEAN DENNIS wrote to ALL <=-

 SD> In my parents' router, I can put in an IP address for the router to set
 SD> up for DMZ.  Do I use the same IP range or change it to something else
 SD> to use for the second router?  For the second router, what do I need to
 SD> do to set up its gateway?

Here is what I would do, and I think it should work.

Let's say the network range of your parents' router is 192.168.1.x. Set
the 2nd router as 192.168.1.88 and then set that IP as DMZ on your
parent's router. 

Now on your secondary router, you can setup it up as a new IP range,
say 192.168.2.x and then forward incoming ports on that router to the
specific IP address of the computer, using the new IP range of .2.

You would basically be double NAT'ing stuff, but that should work. But,
I am sure there are better networking guru's here than me. 

Kev


 
--- Telegard/2/QWK v3.09.g2-sp4/mL
 * Origin: Razor's Domain/2 BBS  (618:200/1)

.