Subj : Re: USR 5686 no replay at AT command
To   : All
From : Nigel Reed
Date : Wed Aug 21 2024 22:30:55

On Thu, 22 Aug 2024 00:19:10 -0400
"rmurray" (21:1/235) <rmurray@f235.n1.z21.fidonet> wrote:
>  Ni> In order to dial a phone number, you need to use the ATDT
>  Ni> command, so it sounds like it at least responds to that AT
>  Ni> command?
>  Ni> 
>  Ni> Nightfox  
> 
> The modem accepts all commands like ATDT without any issues. However,
> when sending basic commands like AT, ATA, ATE1, or AT&F, which should
> normally respond with an "OK," there's no response at all. Although
> the commands themselves are executed, the expected "OK" response is
> missing. Consequently, SEXY isn't working because it requires
> feedback from commands like AT&F, ATS0=1, or ATS0=0, but since
> there's no response, the issue persists with both modems.
> 
> This indicates that the problem likely isn't with the modem itself
> but rather with the computer's configuration, possibly related to
> incorrect DIP switch settings. I've also tried this on Linux with
> both modems, and the same issue occurs.
> 
>                 VA2RFC BBS    Les Méchins, Québec  Canada
>                SysOp: rmurray    PhoneNet: 1000040 (Modem)
>   Telnet: va2rfcbbs.photorm.net:23    FsxNet: 21:1/235    FidoNet:
> 1:229/114
> 
> --- Mystic BBS v1.12 A48 (Windows/64)
>  * Origin: VA2RFC BBS (21:1/235)
If it's not, try flipping switch 4 into the UP position.
-- 
End Of The Line BBS - Plano, TX
telnet endofthelinebbs.com 23

.