Subj : Re: USR 5686 no replay at AT command
To   : Nightfox
From : rmurray
Date : Thu Aug 22 2024 00:19:10

 Ni> In order to dial a phone number, you need to use the ATDT command, so it
 Ni> sounds like it at least responds to that AT command?
 Ni> 
 Ni> Nightfox

The modem accepts all commands like ATDT without any issues. However, when sending basic commands like AT, ATA, ATE1, or AT&F, which should normally respond with an "OK," there's no response at all. Although the commands themselves are executed, the expected "OK" response is missing. Consequently, SEXY isn't working because it requires feedback from commands like AT&F, ATS0=1, or ATS0=0, but since there's no response, the issue persists with both modems.

This indicates that the problem likely isn't with the modem itself but rather with the computer's configuration, possibly related to incorrect DIP switch settings. I've also tried this on Linux with both modems, and the same issue occurs.

                VA2RFC BBS    Les M‚chins, Qu‚bec  Canada
               SysOp: rmurray    PhoneNet: 1000040 (Modem)
  Telnet: va2rfcbbs.photorm.net:23    FsxNet: 21:1/235    FidoNet: 1:229/114

--- Mystic BBS v1.12 A48 (Windows/64)
 * Origin: VA2RFC BBS (21:1/235)

.