Subj : Re: edit in windows 7 64b
To   : Mark Lewis
From : Holger Granholm
Date : Sun Jan 10 2016 10:23:00

In a message on Sunday 01-09-16 mark lewis said to Holger Granholm:

Good morning Mark,

 HG> Yes - but with the help of QEMM 386 the memory problem was solved
 HG> quite nicely, even though you had to juggle the values a bit.

ml> in my case, it required a special memory board... one that could
ml> ""back fill"" the base memory... if i had 512k base memory, then i
ml> could back fill with a 512k chunk... that let DV have up to 512k

I just looked at the MEM report of my first setup for DV, including a
Hitachi CD drive. I had 616 kb memory free (630......bytes).

That CD drive reminds of my trials yesterday to get the operating sys-
tem to recognise all five CD's of my Nakamichi 5-disk changer.

Previously, when that drive was alone, all five disks were recognised,
but now I added a Plexwriter CD/RW drive and since then only one disk
is usable (the first one) of the changer. All five disks do show up at
boot-up, including the CD/RW.

I'll have to open up the box of worms an check SCSI id jumpers, even
though I carefully did that at the mechanical installation.

ml> not all memory cards would back fill the base 1024k of RAM,
ml> either...

I never had any reson to use those memory cards.

ml> i dont' remember what mine were... i should still have them laying
ml> about around here somewhere... i've been thinking about tossing up a
ml> virtual machine and seeing if it will run DV with QEMM... if that
ml> back filling of the memory hole thing works, it should be ok :)

Just yesterday I dug up a copy of the QEMM floppy and copied the files
to the "new" BBS machine I'm setting up.


Have a nice day,

Holger

___
 * MR/2 2.30 * Aland Islands / 60 degrees North / 20 degrees East


--- PCBoard (R) v15.22 (OS/2) 2
 * Origin: Coming to you from the Sunny Aland Islands. (2:20/228)

.