Subj : Re: Weekly nodelist report on noteworthy changes (339) To : Michiel van der Vlist From : Nodelist Police Commissioner Date : Fri Dec 04 2020 12:37:43 Hello Michiel, On 2020-12-04 11:58:39, you wrote to me: MvdV> [ #20 flag ] NC>> I think that the flag just specifies an extra mail hour for the node. NC>> If it coincides with a zone mail hour of another zone (existent or NC>> not), that doesn't really matter... MvdV> That is what FTS-5001 says: MvdV> === quote === MvdV> 5.6. Mail Period Flags MvdV> ---------------------- MvdV> The Mail Period Flags indicate compliance with another zone's ZMH. MvdV> === end quote === MvdV> For specifying extra mail times in addition of ZMH, we have the Tyz flags MvdV> as documented in FTS-5001 5.7. MvdV> And if course the Tyz and #xx flags should only be used for non CM nodes, I was going by what is in the Z2 nodelist about this: ;S The following flags define the dedicated mail periods supported. ;S They have the form "#nn" or !nn where nn is the UTC hour the mail ;S period begins, # indicates Bell 212A compatibility, and ! ;S indicates incompatibility with Bell 212A. ;S ;S Flag Meaning ;S ;S #02 Zone 2 mail hour (02:30 - 03:30 UTC) (do not use in zone-2) ;S #08 Zone 4 mail hour (08:00 - 09:00 UTC) ;S #09 Zone 1 mail hour (09:00 - 10:00 UTC) ;S #17 Zone 3 mail hour (17:00 - 18:00 UTC) ;S ;S NOTE: When applicable, the mail period flags may ;S be strung together with no intervening commas, eg. ;S "#08#09". Only mail hours other than what is standard ;S for one's own zone should be given. Since ;S observance of mail hour within one's zone is ;S mandatory, it obviously must not be indicated. I read that as any hour is ok behind the #... Regards, NPC. --- FMail-lnx64 2.1.0.18-B20170815 * Origin: NPC Station (2:280/464) .