Subj : routed netmail
To   : g00r00
From : Micheal Pierce
Date : Mon May 04 2020 14:42:34

 MP>> problem - mail to other systems points going out via my
 MP>> uplink/hub 340/400 (sbbs). everyrything goes out to 340/400 -
 MP>> want to turn that off so that netmail for zone 1 goes direct to
 MP>> the boss node (ie if I enter a netmail to 1:1.1 mystic would send
 MP>> it 1:1/1)

 gr> I am a little confused by the addressing there.  I will give you an
 gr> example:

 gr> If you have a point system 123:456/1.1 and you want it to send all
 gr> Netmail directly to 123:1/1 then you'd go into your Echomail Nodes on
 gr> your 123:456/1.1 system and create an entry for 123:1/1 (where you
 gr> want to send your mail) and then set "Route Info: 123:*".

 gr> This will tell your point node (123:456/1.1) to send all Netmail for
 gr> zone 123 through 123:1/1.  It will bypass 123:456/1 entirely which I
 gr> think is what you want to do.

that is the end results, but what I do not want to do is route the netmail, I want netmail to be direct to in this example 123:1/1 or 124:1/45 or where ever

what your example says, a point system, using binkp.net would have to create an entry each destination.





Micheal


.... Mountains should be seen and felt.
--- GoldED+/LNX 1.1.5-b20180707
 * Origin: Mike's Mansion - Portland, OR - mansion.dynv6.net:2323 (1:340/201)

.