Subj : FSP-1038.001
To   : Stas Degteff
From : Michiel van der Vlist
Date : Thu Nov 07 2013 00:21:20

Hello Stas,

On Wednesday November 06 2013 03:33, you wrote to Markus Reschke:

 MR>> It could be useful for IPv4-only nodes if the INO4 flag is used
 MR>> by a ruleset in the mailer configuration, for example:

 MR>>   if IBN & !INO4 : "call using binkp"

 MR>> The node might running dual stack inside the LAN but only got
 MR>> IPv4 Internet access.

 SD> FYI, any node with ipv4 MAY connect to IPv6 world using "6to4" tunnel

In the case of a dual stack LAN, as Markus mentioned, the 6to4 tunnel endpoint must be in the router. Not all routers support that. well, you can change the router.  But also.. A 6to4 tunnel requires a (quasi)static IPv4 address for the tunnel end point. That is something not everyone has and can change.

 SD> or teredo or tunnel brocker.

Teredo sucks...

 SD>  IPv6 on my node connected via 6to4 (address in the subnet 2002::)

So does my tunnel (2001:: subnet)

But what works for you and me, may not work for all.


Cheers, Michiel

--- GoldED+/W32-MINGW 1.1.5-b20110320
 * Origin: 2001:470:1f15:1117::1 (2:280/5555)

.