Subj : Re: Connectivity...
To   : Bill McGarrity
From : Benny Pedersen
Date : Sat Oct 03 2015 09:49:54

Hello Bill!

03 Oct 2015 01:42, Bill McGarrity wrote to Benny Pedersen:

 BM> I really have to work on getting one again.  I guess where I live the 
 BM> outages have been barely an issue, so out of sight, out of mind. We have 
 BM> inground wires here so no issues with falling trees or drunk drivers... :)

so drivers drive unsafely ?

drunk or not ? :)

   ----- apc.txt begins -----
APC      : 001,042,1042
DATE     : 2015-10-03 09:49:44 +0200  
HOSTNAME : duggi
VERSION  : 3.14.8 (16 January 2010) gentoo
UPSNAME  : JERSORE
CABLE    : USB Cable
MODEL    : Smart-UPS 1000 RM 
UPSMODE  : Stand Alone
STARTTIME: 2015-10-03 03:34:57 +0200  
STATUS   : ONLINE 
LINEV    : 228.9 Volts
LOADPCT  :   6.5 Percent Load Capacity
BCHARGE  : 100.0 Percent
TIMELEFT :  41.0 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 6 Minutes
MAXTIME  : 0 Seconds
OUTPUTV  : 228.9 Volts
SENSE    : Medium
DWAKE    : -01 Seconds
DSHUTD   : 090 Seconds
LOTRANS  : 204.0 Volts
HITRANS  : 253.0 Volts
RETPCT   : 000.0 Percent
ITEMP    : 25.2 C Internal
ALARMDEL : Low Battery
BATTV    : 27.7 Volts
LINEFREQ : 50.0 Hz
LASTXFER : Automatic or explicit self test
NUMXFERS : 0
TONBATT  : 0 seconds
CUMONBATT: 0 seconds
XOFFBATT : N/A
SELFTEST : NO
STESTI   : 7 days
STATFLAG : 0x07000008 Status Flag
SERIALNO : .
BATTDATE : 2011-01-19
NOMOUTV  : 230 Volts
NOMBATTV :  24.0 Volts
FIRMWARE : 618.3.I USB FW:1.5
APCMODEL : Smart-UPS 1000 RM 
END APC  : 2015-10-03 09:49:45 +0200  
   ----- apc.txt ends -----

19" rack model, same hardware exists as a desktop version, but it fits nicely under my dual wan dlink router and smc 24 port gigabit switch :=)

possible time to get new batteries on it, but since my load is not that much anymore i expect it holds little longer then when it was 50% loaded


 Regards Benny

.... there can only be one way of life, and it works :)

--- Msged/LNX 6.2.0 (Linux/4.2.2-gentoo (i686))
 * Origin: openvpn on its way here (1:261/38.20)

.