Subj : List of IPv6 nodes
To   : Kees van Eeten
From : Tommi Koivula
Date : Thu Mar 20 2014 09:47:08

On 19.3.2014 20:22, Kees van Eeten -> Tommi Koivula wrote:

 KvE> At the moment that should not really be a problem. The number of
 KvE> nodes, that you connect to on a regular basis using IPv6 is still
 KvE> small, so you can go for an elaborate solution.

There is very small amount of ipv6-only nodes. <g>

 KvE> For every node you want to connect to, you make a path trough relay6,
 KvE> all from localhost to remote hostname. For every node you use a
 KvE> different port number on the localhost side, the outgoing port number
 KvE> will mostly be 24554. You will have to make a local nodelist where
 KvE> argus finds localhost:port for the node to be connected to. Up til 10
 KvE> or 20 nodes this should not be a problem.

Quite complex solution but sure it can be done that way. ;)

Using for example Privoxy for outbound doesn't need any
per-node-configuration. I can poll your ipv6-only node from my ipv4-only
point by only nodelist information.

'Tommi

--- Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
 * Origin: *** nntp://rbb.bbs.fi *** Lake Ylo *** Finland *** (2:221/361)

.