[=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]
       [<<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>><<>]
       [=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]
       
       Stardate: 20241016.2214 
       Location: The Lab 
       Input Device: Sun Microsystems Ultra 10 
       Audio: aNONradio
       Visual: Sun Lab Desk, CDE 
       Emotional: Frustruation
       
       [=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]
       
       RC2024 DAY IX:
       
       NETRA X1
       MAINT: Opened up the Netra X1 server, cleaned up the 
              internals/externals, took some pictures.
       FOUND: Console kit + 9-pin adapter.
       FOUND: Eclipse Computer Workstation Light
       INSTALL: Eclipse light on 19" Samsung SyncMaster 900NF
       NOTE: Connected to Serial B on Ultra to LOM
             # tip /dev/term/b -9600
             # poweron
       NOTE: Netra X1's hostname is 'grendizer'
       NOTE: grendizer is running FreeBSD
             root@grendizer:/usr/ports # uname -a
             FreeBSD grendizer 9.2-RELEASE FreeBSD 9.2-RELEASE #0 r255898: 
             Thu Sep 26 21:26:41 UTC 2013     
             root@snap.freebsd.org:/usr/obj/sparc64.sparc64/usr/src/sys
             /GENERIC  sparc64
       NOTE: Last supported version of FreeBSD was v12.4.  Current version
             is v14.
       DOWNLOAD: tribblix
       
       [=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]
       
       DAY XII:
       
       POWER: Netra X1 LOM runs 2 watts idle.
       root@grendizer:~ # uname -a
       FreeBSD grendizer 9.2-RELEASE FreeBSD 9.2-RELEASE #0 r255898: Thu 
       Sep 26 21:26:41 UTC 2013     root@snap.freebsd.org:/usr/obj/sparc64.
       sparc64/usr/src/sys/GENERIC  sparc64
       
       POWER: Netra X1 runs around 42 watts
       LOM:
       LOMlite starting up.
       
       CPU type: H8/3437S, mode 3
       Ram-test: 2048 bytes OK
       Initialising i2c bus: OK
       Searching for EEPROMs: 50(cfg) 
       I2c eeprom @50: OK
       i2c bus speed code 01... OK
       Probing for lm80s: none
       Probing for lm75s: 48
       Initialising lm75 @48: OK
       System functions: PSUs fans breakers rails gpio temps host CLI ebus clock 
       
       LOMlite console
       
       ISSUE: tribblix installer does not work with <512MB RAM.
              Netra X1 only has 128MB
       FIX: Install OpenBSD v7.6
            Downloaded and burnt ISO to CDROM
            Tried 2 optical drives, the Acer DVD drive worked.
       ADDED: Acer DVD drive
       ISSUE: DVD drive is not reading CDROM
       FIX: Burnt ISO to DVD.
       INSTALLED: OpenBSD v7.6
       POWER: 0.23KWh @ 6h41m
       
       [=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]
       
       DAY XIII
       Connected Netra X1 to network and ethernet crossover cable to 
       Ultra 10.  Console cable is attached to LOM port on X1 and 9-pin
       serial port on the Ultra.
       FAIL: Connecting from Ultra to X1 over crossover cable via ssh.
       TEMP FIX: Login to X1 over LOM port.
       REVIEW: OpenCSW for updates
       POWER: 1.14 KWh @ 5h49m
       POWER: Ultra 10 + Netra X1 + Samsung 900NF CRT + powered desktop
              speakers + Eclipse lamp + UPS
       
       [=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]
       
       DAY XIV - XVI
       
       UNPLANNED: Installfest 2024
       
       Only 1 ethernet port available on local switch..
       Tried connecting Ultra to Netra X1 via crossover cable: success.
       Openssh version is too new on the X1 for the Ultra to connect to.
       Reviewed options for connection
       Keep Console kit connected to LOM port.
       
       BRIGHT IDEA: Try installing tribblix on a spare IDE hard drive.
       TASK: Find compatible IDE hard drive...DONE!
       TASK: Find compatible CDROM/DVD Drive for Ultra...DONE!
       TASK: Download and burn tribblix ISO to optical media...DONE!
       TASK: Install tribblix...FAIL after 3 attempts...file system full 
             error.
       BRIGHT IDEA: Try installing OpenBSD on spare IDE hard drive.
       TASK: Install OpenBSD...FAIL after 3 attempts...system locks up 
             during end portion of install.
       At this point, I'm done with messing with a new install.
       BRIGHT IDEA: Reconnect existing IDE drive and continue to use  
                    Solaris 10....SUCCESS!!!
       Temporarily freed up ethernet port on local switch for Ultra.
       
       [=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=-=x=]