2.3.2  Banyan VINES 4.1x

   When you  set up  Windows for  use with  Banyan  VINES 4.1,  the following
   entries are added to the [386Enh] section of your SYSTEM.INI file:

           Network=*dosnet, *vnetbios, vvinesd.386
           TimerCriticalSection=5000
           UniqueDOSPSP=TRUE
           PSPIncrement=5

   See SYSINI.WRI for more information on these settings.

   In addition:

   . If you  are running  VINES  4.10 or  4.11  (below 4.11(5))  and  you have
     problems printing, you may need to upgrade your VINES.DRV. This driver is
     available from Banyan.

   . If you are  running Banyan VINES  4.10 or 4.11,  you do not  need to load
     NetBIOS unless you are running NetBIOS-specific applications.  (It is not
     required for printing, as it is with VINES 4.0x.)

     If you  are running  version 4.10  and you  want to  run NetBIOS-specific
     applications with Windows  running in 386  enhanced mode, you  must start
     NetBIOS before  starting  Windows. However,  you  can only  run  a single
     NetBIOS application at a time.

     If you  are running  version 4.11,  you  can load  NetBIOS  either before
     starting Windows or after starting Windows in 386 enhanced mode.

     If you want  to run NetBIOS  with Windows  running in standard  mode, you
     must load  NetBIOS  from within  Windows.   If  you  load NetBIOS  before
     starting  Windows,  you  will  not  be  able  to  start  any  non-Windows
     applications.

     For  more  information  on  running  memory-resident  applications  after
     starting Windows,  see  Chapter  7,  "Non-Windows  Applications," in  the
     Microsoft Windows User's Guide.

.