2.3.1  Banyan VINES 4.0x

   When you set  up Windows  for use  with Banyan  VINES 4.0x,  the following
   entries are added to the [386Enh] section of your SYSTEM.INI file:

           TimerCriticalSection=5000
           UniqueDOSPSP=TRUE
           PSPIncrement=5

   See SYSINI.WRI for more information on these settings.

   . To use Windows  printing functions  with VINES 4.0,  you must  have VINES
     4.00(5) or later and must have the NetBIOS  support loaded. If you cannot
     print to a network printer, ask your network administrator to verify that
     you are loading NetBIOS  and that you  are running the  proper version of
     VINES.

   . If you are running  VINES 4.0 with  Windows running in  386 enhanced mode
     and want  to  run non-Windows  applications  that use  NetBIOS,  you must
     install VINES  4.00(5) or  later. In  addition,  you will  need  to start
     NetBIOS before starting Windows.

     If you start  VINES NetBIOS support  before starting Windows  in standard
     mode, you may not be able  to start any non-Windows  applications. If you
     have this  problem, load  NetBIOS from  within Windows,  or  contact your
     Banyan dealer for more information.

   . Versions below site-specific patch 0H will not support Windows running in
     386 enhanced mode.

   . If you are running VINES version  4.0x and you have a  problem with print
     jobs that time-out intermittently,  you can either update  to VINES 4.1x,
     or use the VINES SETPRINT utility  to remove the timeout  on your printer
     port by specifying the following:

     SETPRINT lptn servicename /D:INFINITE

     Lptn is the printer port and servicename is the name of the network print
     queue.

.