2.2.1  Artisoft LANtastic 3.x

   When you set up Windows for use  with LANtastic 3.x, the following entries
   are added to the [386Enh] section of SYSTEM.INI:

   EMMExclude=D800-DFFF
   INDOSPolling=TRUE
   NetHeapSize=76
   NetAsynchFallback=TRUE
   NetAsynchTimeout=50

   In addition:

   To print from any mode of Windows across LANtastic 3.x, it is necessary to
   do one of the following:

   . Turn off the Fast Printing Direct To Port option  in Control Panel. To do
     this, choose the  Printers option in  Control Panel, and  then choose the
     Connect button. In the Connect dialog box, clear the Fast Printing Direct
     To Port check box.

     When you turn off this option, it affects all of your ports.

   If you want to turn this option off for one port only, follow these steps:

   1.        If you are printing  using LPT3, add the  following entry to the
     [ports] section of the WIN.INI file:

     LPT3.DOS=

     If you are  using LPT1  or LPT2, you  can use  the LPT1.DOS  or LPT2.DOS
     entries already in your WIN.INI file.

   2.        Quit Windows, and  then redirect the  LPTx.DOS port  (where x is
     the port you are using) by using the LANtastic net use command.

   3.        Restart Windows.

   4.        Using Control Panel, change your printer port to LPTx.DOS.


   . If you are running LANtastic version  3.x, you cannot run  Windows in 386
     enhanced mode on a non-dedicated server.

   . If you have  a network connection  on LPT1, it  will not be  displayed in
     Print Manager or Control Panel.


.