INT 7C - SK-UPPS Data Link Interface API - DLI 2.5+ - GET DRIVER INFO
        AX = 000Eh
        ES:DI -> Driver Information Block (see below)
        BX = offset of 1st field within DIB to be returned
        CX = number of bytes to be returned
Return: AX = completion code (see AX=0001h)
        CX = number of bytes copied (regardless of value returned in AX)
Program: SK-UPPS is the Schneider & Koch Universal Portable Protocol Stack,
          which provides an API on top of its Data Link Interface, allowing the
          use of any of several network transport layers
SeeAlso: AX=0000h,AX=0002h,AX=000Bh,AX=000Dh,AX=0015h

Format of Driver Information Block (DIB):
Offset  Size    Description
 00h  6 BYTEs   physical node address (from adapter's ROM)
 06h  6 BYTEs   current node address (see AX=0003h)
 0Ch    BYTE    adapter id (defined by OEM)
 0Dh    BYTE    IRQ line (FFh if none)
 0Eh    DWORD   -> shared memory (zero if none)
 12h    DWORD   size of shared memory (zero if none)
 16h    WORD    base I/O port (zero if none)
 18h    BYTE    DMA line (FFh if none)
 19h    BYTE    DLI 2.4+ topology (see AX=0000h)
 1Ah    WORD    size of an Mbuf's DATA area (see AX=0004h)
 1Ch  2 BYTEs   reserved (currently unused)
 1Eh    WORD    total number of Mbufs the DLI has
 20h    WORD    maximum number of Mbufs that can be allocated via REQUEST
                 BUFFER (AX=0004h) and SYNC REQUEST BUFFER (AX=0012h)
 ---- end of Status Information Block returned by GET DRIVER STATUS (AX=0002h)
 22h    DWORD   -> ASCIZ adapter name
 26h    WORD    number of I/O ports used (zero if none)
 28h    DWORD   line speed in bits/sec.

.