INT 15 - SYSTEM - POINTING DEVICE BIOS INTERFACE (PS) - RESET
        AX = C201h
Return: CF set on error
            AH = status (see AX=C200h)
        CF clear if successful
            BH = device ID
            BL = value returned by attached device after reset
                AAh if device is a mouse
Note:   after successful completion of this call, the pointing device is set
          as follows: disabled, sample rate 100 Hz, resolution 4 counts/mm,
          scaling 1:1, unchanged data package size
SeeAlso: INT 33/AX=0000h

.