From bkoeller@u.washington.edu Mon Feb 14 14:44:09 2000 Received: from jason03.u.washington.edu (root@jason03.u.washington.edu [140.142.77.10]) by lists.u.washington.edu (8.9.3+UW99.09/8.9.3+UW99.09) with ESMTP id OAA24304 for ; Mon, 14 Feb 2000 14:44:08 -0800 Received: from dante42.u.washington.edu (bkoeller@dante42.u.washington.edu [140.142.15.202]) by jason03.u.washington.edu (8.9.3+UW99.09/8.9.3+UW00.01) with ESMTP id OAA34496 for ; Mon, 14 Feb 2000 14:44:04 -0800 Received: from localhost (bkoeller@localhost) by dante42.u.washington.edu (8.9.3+UW99.09/8.9.3+UW99.09) with ESMTP id OAA84778 for ; Mon, 14 Feb 2000 14:44:04 -0800 Date: Mon, 14 Feb 2000 14:44:04 -0800 (PST) From: "B. Koeller" To: UW Linux Group Subject: Re: dvd In-Reply-To: <003601bf7735$ccd13d20$38bd6bcc@wolfe.net> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Uh...me to. :) I have a creative 6x dvd drive working with no problems in RH6.1 (with the obvious exception of actual dvd support). Brandon "Just once, I wish we would encounter an alien menace that wasn't immune to bullets" -- The Brigader, "Dr. Who" On Mon, 14 Feb 2000, Devin Scherck wrote: > My creative DVD works fine in Linux. What distro? What DVD-drive do you > have? The 2x? the 5x? the 6x? > > > ----- Original Message ----- > From: "Bradley Bell" > To: "UW Linux Group" > Sent: Sunday, February 13, 2000 5:27 PM > Subject: dvd > > > > Anybody out there have much experience with dvd? I just got an IDE > > DVD drive (Creative SR8581) and simply swapped it with the CD-ROM drive I > > had in before. Everything seems to go fine at bootup (BIOS and kernel > > recognize it correctly, but I can't get anything to mount. > > > > I get identical results with both a dvd and an old-fashioned cdrom, and > > both before and after applying the DVD+IDE patch from > > http://www.kernel.dk/ to my 2.2.14 kernel: > > > > smeagol:~# mount -t iso9660 /dev/cdrom /cdrom > > mount: block device /dev/cdrom is write-protected, mounting read-only > > ATAPI device hdc: > > Error: Not ready -- (Sense key=0x02) > > Incompatible medium installed -- (asc=0x30, ascq=0x00) > > The failed "Test Unit Ready" packet command was: > > "00 00 00 00 00 00 00 00 00 00 00 00 " > > hdc: irq timeout: status=0xd0 { Busy } > > hdc: ATAPI reset complete > > ATAPI device hdc: > > Error: Not ready -- (Sense key=0x02) > > Incompatible medium installed -- (asc=0x30, ascq=0x00) > > The failed "Test Unit Ready" packet command was: > > "00 00 00 00 00 00 00 00 00 00 00 00 " > > mount: No medium found > > > > does this look like a bad drive, or is there something I missed? > > btw, it doesn't work in windows either, but I'm not so quick to blame the > > hardware in that case, if you know what I mean. > > > > -brad > > > > .