  Q106423
 
======================================================================
  Microsoft Product Support Services Application Note (Text File)
 PD0771: REPARTITIONING YOUR HARD DISK TO UPGRADE TO MS-DOS 6.0 OR 6.2
======================================================================
                                                  Revision Date: 11/93
                                                      No Disk Included
 
The following information applies to Microsoft MS-DOS, versions 6
Upgrade, and 6.2 Upgrade.
 
-----------------------------------------------------------------------
| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS utility diskcopy is |
| appropriate for this purpose);  3) All components of this           |
| Application Note must be distributed together;  and  4) This        |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1993 Microsoft Corporation.  All Rights Reserved.     |
| Microsoft and MS-DOS are registered trademarks and Windows is a     |
| trademark of Microsoft Corporation.                                 |
| Fastback is a trademark of Archive Corporation.                     |
| PC Tools is a trademark of Central Point Software, Inc.             |
| Everex is a trademark of Everex Systems, Inc.                       |
| Norton Utilities is a registered trademark of Peter Norton Computing|
| Priam is a registered trademark of Priam Corporation.               |
| SpeedStor is a registered trademark of Storage Dimensions.          |
-----------------------------------------------------------------------
 
DO YOU NEED TO REPARTITION?
===========================
 
In most cases, you don't need to repartition your hard disk to install
MS-DOS version 6.0 or 6.2. You need to repartition your hard disk only
if:
 
 - The primary DOS partition on your hard disk is too small (less than
   2 megabytes [MB]).
 - The size of the clusters or sectors on your hard disk is
   incompatible with MS-DOS version 6.0 or 6.2.
 - There are more than four primary partitions on your hard disk.
 - The primary DOS partition is inaccessible.
 - A disk-partitioning program that is not compatible with the Setup
   program for MS-DOS was used to partition your hard disk.
 - Your primary DOS partition is incompatible with the Setup program
   for MS-DOS. (This may be the case if you receive an error message
   when trying to run Setup.)
 
If you don't need to repartition your hard disk for any of the
preceding reasons, but you still would like to, see "Optionally
Repartitioning Your Hard Disk" at the end of this document. If you
have determined that you cannot install MS-DOS version 6.0 or 6.2
without repartitioning your hard disk, use the procedures in the
"Preparing to Repartition" section.
 
   Warning: Once you repartition your hard disk, you can no longer use
   the Uninstall disk to return to your previous version of MS-DOS.
 
PREPARING TO REPARTITION
========================
 
Before you partition your hard disk, you need the following:
 
 - Enough floppy disks to back up your hard disk. Make sure your
   floppy disks are newly formatted.
 - A single floppy disk on which to install MS-DOS 6.0 or 6.2.
 
Repartitioning your hard disk involves:
 
 - Creating an MS-DOS Startup disk
 - Backing up your hard disk
 - Repartitioning your hard disk by using the Fdisk program
 - Formatting your hard disk
 - Restoring your backed-up files
 - Upgrading your system to MS-DOS 6.0 or 6.2
 
   Warning: If you are using software such as Disk Manager,
   SpeedStor, Priam, or Everex to replace the BIOS in
   interactions between MS-DOS and the hard disk controller, do not
   repartition your hard disk with the MS-DOS Fdisk program. Instead,
   use the disk-partitioning program you originally used to partition
   your hard disk.
 
   To determine whether you have one of these disk-partitioning
   programs on your computer, search for the following files:
   DMDRVR.BIN (Disk Manager), SSTOR.SYS (SpeedStor), HARDRIVE.SYS
   (Priam), and EVDISK.SYS (Everex). If you need help in
   repartitioning your hard disk or are unsure whether the BIOS is
   being replaced, contact the manufacturer of your original disk-
   partitioning software.
 
Creating a Startup Disk
-----------------------
 
Begin by creating an MS-DOS version 6.0 or 6.2 Startup disk. To do so:
 
1. Start your computer with your current version of MS-DOS.
 
2. Insert MS-DOS 6.0 or 6.2 Setup Disk 1 in drive A.
 
3. Type A:SETUP /F at the MS-DOS command prompt, press ENTER, and then
   follow the instructions on your screen.
 
   Setup expands key MS-DOS files onto your floppy disk. You'll use
   this floppy disk with the expanded files to temporarily run MS-DOS
   version 6.0 or 6.2.
 
Backing Up Your Files
---------------------
 
You should back up files on every partition and each logical drive of
your hard disk.
 
   Warning: Make sure you back up your files before using the Fdisk
   program. When you delete or modify a partition, all files on that
   partition are deleted.
 
Use the MS-DOS BACKUP command to back up all the files on your hard
disk to a floppy disk by typing the following at the MS-DOS command
prompt and pressing ENTER
 
      backup <drive>:\*.* <floppy>: /s
 
where <drive> is your hard disk drive and <floppy> is your floppy disk
drive. The /S switch specifies that every file in every directory will
be backed up. For example, to back up every file in every directory on
hard disk drive C onto disks in floppy disk drive A, type the
following command and press ENTER:
 
      backup c:\*.* a: /s
 
   NOTE: Use the backup command to back up files on every partition
   and each logical drive of your hard disk.
 
You can use your current version of the MS-DOS BACKUP command because
it should be compatible with the RESTORE command provided with MS-DOS
6.0 and 6.2. Because MS-DOS 6.0 and 6.2 include the full-screen
version of Microsoft Backup for MS-DOS and Microsoft Backup for
Windows, the MS-DOS command prompt version of BACKUP is not included
with the product. However, the RESTORE command is still provided.
 
   NOTE: Before using your current version of the backup command and
   repartitioning, you should back up a few files and use the restore
   command provided with MS-DOS 6 Upgrade or MS-DOS 6.2 Upgrade to
   restore the files. This should be done as a safety precaution to
   ensure you are not using an original equipment manufacturer (OEM)
   version of backup that is not compatible with the MS-DOS restore
   command.
 
If you do not want to use BACKUP and RESTORE, you can use a third-
party backup program such as Fastback, Norton Utilities Backup, PC
Tools Backup, and so forth.
 
Repartitioning Your Hard Disk
-----------------------------
 
Repartitioning your hard disk involves:
 
    - Deleting any non-DOS partitions
    - Deleting the logical drives in the extended DOS partition, if
      your system has any
    - Deleting the extended DOS partition, if your system has one
    - Deleting any primary DOS partitions
    - Creating a new primary DOS partition
    - Specifying the maximum disk size for the partition, and making
      the partition active
 
Before you repartition your hard disk, make sure you write down the
volume label for each partition. You will need this information later.
To find the volume label for your hard disk drive, type the following
at the MS-DOS command prompt and press ENTER
 
   vol <drive>:
 
where <drive> is your hard disk drive. For example, if you want to
determine the volume label for drive C, type the following command:
 
   vol c:
 
To repartition your hard disk:
 
1.  If you are not already running MS-DOS 6.0 or 6.2, insert your
    Startup disk in drive A, and then restart your computer by
    pressing CTRL+ALT+DEL.
 
2.  If you have not already done so, insert the Startup disk (which
    you created using the procedure in the "Creating a Startup Disk"
    section) in drive A.
 
3.  At the MS-DOS command prompt, type FDISK and press ENTER. The
    FDISK Options screen appears.
 
    -----------------------------------------------------------------
                          MS-DOS Version 6.2
                       Fixed Disk Setup Program
                (C)Copyright Microsoft Corp. 1983-1993
 
                             FDISK Options
 
    Current fixed disk drive: 1
 
    Choose one of the following:
 
    1. Create DOS partition or Logical DOS Drive
    2. Set active partition
    3. Delete partition or Logical DOS Drive
    4. Display partition information
 
    Enter choice: [1]
 
    Press ESC to exit FDISK
    -----------------------------------------------------------------
 
4.  Press 3 to choose Delete Partition Or Logical DOS Drive, and then
    press ENTER. The Delete DOS Partition Or Logical DOS Drive screen
    appears.
 
    -----------------------------------------------------------------
               Delete DOS Partition or Logical DOS Drive
 
    Current fixed disk drive: 1
 
    Choose one of the following:
 
    1. Delete Primary DOS Partition
    2. Delete Extended DOS Partition
    3. Delete Logical DOS Drive(s) in the Extended DOS Partition
    4. Delete Non-DOS Partition
 
    Enter choice: [ ]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
5.  If any of your partitions were created with a third-party disk-
    partitioning utility or installation program, press 4 to choose
    Delete Non-DOS Partition, and then press ENTER. If all your
    partitions were created with MS-DOS, press ESC to return to the
    FDISK Options screen, then skip to step 10 of this procedure.
 
    If you chose option 4, the Delete Non-DOS Partition screen
    appears.
 
    -----------------------------------------------------------------
                       Delete Non-DOS Partition
 
    Current fixed disk drive: 1
 
    Partition  Status  Type   Volume Label  Mbytes System Usage
    C: 1         A    PRI DOS                 23    FAT16  33%
       2              Non-DOS                 23           33%
       3              EXT DOS                 23           33%
 
    Total disk space is 69 Mbytes (1 Mbyte=1048576 bytes)
 
    WARNING! Data in the deleted Non-DOS Partition will be lost.
    What non-DOS partition do you want to delete..? [1]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
6.  Type the number of the partition you want to delete, and then
    press ENTER.
 
7.  To confirm the deletion, press Y, and then press ENTER.
 
8.  Press ESC to return to the FDISK Options screen.
 
9.  Repeat steps 4 - 8 if you have any other partitions that were
    created with a third-party disk-partitioning utility or
    installation program.
 
10. The FDISK Options menu should now be on your screen. If you have a
    partition that was created with MS-DOS, press 3 to choose Delete
    Partition Or Logical DOS Drive and press ENTER.
 
    If you chose option 3 on the FDISK Options screen, the Delete DOS
    Partition Or Logical DOS Drive screen appears.
 
11. If you have a logical drive, press 3 to choose Delete Logical DOS
    Drive(s) In The Extended DOS Partition and press ENTER. The Delete
    Logical DOS Drive(s) In The Extended DOS Partition screen appears.
    If you don't have any logical drives, skip to step 19.
 
    -----------------------------------------------------------------
       Delete Logical DOS Drive(s) in the Extended DOS Partition
 
    Drv  Volume  Label  Mbytes  System   Usage
    D:                    15     FAT12    65%
    E:                     8     FAT12    35%
 
    Total Extended DOS Partition size is 23 Mbytes (1 MByte=1048576
    bytes)
 
    WARNING! Data in a deleted Logical DOS Drive will be lost.
    What drive do you want to delete.........................? [ ]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
12. Type the letter of the drive you want to delete and press ENTER.
 
13. Type the volume label if there is one and press ENTER.
 
14. To confirm the deletion, press Y and press ENTER.
 
15. If there are other logical drives you want to delete, repeat steps
    12 - 14 above.
 
16. When all logical drives have been deleted, press ESC. An
    information screen appears.
 
17. Press ESC again to return to the FDISK Options screen.
 
18. Press 3 to choose Delete Partition Or Logical DOS Drive and press
    ENTER. The Delete DOS Partition Or Logical DOS Drive screen
    appears.
 
19. Press 2 to choose Delete Extended DOS Partition and press ENTER.
    The Delete Extended DOS Partition screen appears. If you don't
    have any extended DOS partitions, skip to step 21.
 
    -----------------------------------------------------------------
                     Delete Extended DOS Partition
 
    Current fixed disk drive: 1
 
    Partition  Status    Type    Volume Label  Mbytes  System  Usage
    C: 1          A     PRI DOS                  23     FAT16   33%
       2                EXT DOS                  23             33%
 
    Total disk space is 69 Mbytes (1 Mbyte=1048576 bytes)
 
    WARNING! Data in the deleted Extended DOS Partition will be lost.
    Do you wish to continue (Y/N)........................? [N]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
20. To confirm that you want to delete the extended DOS partition,
    press Y and press ENTER.
 
21. Press ESC to return to the FDISK Options screen.
 
22. Press 3 to choose Delete Partition Or Logical DOS Drive and press
    ENTER. The Delete DOS Partition Or Logical DOS Drive screen
    appears.
 
23. Press 1 to choose Delete Primary DOS Partition and press ENTER.
    The Delete Primary DOS Partition screen appears.
 
    -----------------------------------------------------------------
                     Delete Primary DOS Partition
 
    Current fixed disk drive: 1
 
    Partition  Status    Type    Volume Label  Mbytes  System  Usage
    C: 1          A     PRI DOS                  23     FAT16   33%
 
    Total disk space is 69 Mbytes (1 Mbyte=1048576 bytes)
 
    WARNING! Data in the deleted Primary DOS Partition will be lost.
    What primary partition do you want to delete..? [1]
    Enter volume label...............................? [           ]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
24. Press ENTER to delete your primary partition.
 
25. Type the volume label, if there is one, and press ENTER.
 
26. To confirm the deletion, press Y and press ENTER.
 
27. Press ESC to return to the FDISK Options screen.
 
28. Press ENTER to choose Create A DOS Partition Or Logical DOS Drive.
    The Create DOS Partition Or Logical DOS Drive screen appears.
 
    -----------------------------------------------------------------
               Create DOS Partition or Logical DOS Drive
 
    Current fixed disk drive: 1
 
    Choose one of the following:
 
    1. Create Primary DOS Partition
    2. Create Extended DOS Partition
    3. Create Logical DOS Drive(s) in the Extended DOS Partition
 
    Enter choice: [1]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
29. Press ENTER to choose Create Primary DOS Partition. The Create
    Primary DOS Partition screen appears.
 
    -----------------------------------------------------------------
                     Create Primary DOS Partition
 
    Current fixed disk drive: 1
 
    Do you wish to use the maximum available size for a Primary DOS
    Partition and make the partition active (Y/N)..............?[Y]
 
    Press ESC to return to FDISK Options
    -----------------------------------------------------------------
 
30. Press ENTER to specify the maximum size for the partition and make
    the partition active.
 
31. Make sure your Startup disk is in drive A and press any key.
 
Formatting Your Hard Disk
-------------------------
 
You cannot use your hard disk until you format it.
 
To format your hard disk:
 
1. Make sure you are running MS-DOS 6.0 or 6.2 from your Startup disk.
 
2. Type the following at the MS-DOS command prompt and press ENTER
 
      format <drive>: /s
 
   where <drive> is your hard disk drive. For example, if your hard
   disk drive is drive C, type the following command:
 
      format c: /s
 
3. Press Y and press ENTER to proceed with formatting.
 
4. Once formatting is complete, type a volume label if you want one
   and press ENTER.
 
Restoring Your Files
--------------------
 
Now you can restore the files you backed up previously. If you used a
third-party program such as Fastback to back up your files, use the
same program to restore your files. If you used the MS-DOS BACKUP
command, use the MS-DOS RESTORE command to restore them.
 
To restore your files using the MS-DOS RESTORE command:
 
1. Insert the Startup disk in drive A.
 
2. Type the following at the MS-DOS command prompt and press ENTER
 
      restore <drive1>: <drive2>:\*.* /s
 
   where< drive1> specifies the drive on which the backed-up files are
   stored and <drive2> is your hard disk drive. For example, if you
   insert your backup disk in drive A and your hard disk drive is
   drive C, type the following command:
 
      restore a: c:\*.* /s
 
   The /S switch restores every file in every subdirectory you backed
   up.
 
3. Insert your Startup disk if you are prompted with the following
   message:
 
      Insert disk with \COMMAND.COM in drive A
 
4. Repeat steps 2 and 3 if you have other backup disks. For example,
   you might have a set of backup disks for drive D.
 
Upgrading to MS-DOS 6.0 or MS-DOS 6.2
-------------------------------------
 
Now you can upgrade your system to MS-DOS version 6.0 or 6.2. To
upgrade:
 
1. Insert Setup Disk 1 in drive A.
 
2. At the MS-DOS command prompt, type A:SETUP and press ENTER.
 
3. Continue following the instructions on the screen to install
   MS-DOS.
 
   NOTE: Before you restart your system, make sure drive A is empty.
 
Optionally Repartitioning Your Hard Disk
----------------------------------------
 
If you don't need to repartition your hard disk in order to install MS-
DOS version 6.0 or 6.2, follow the steps outlined here. You have two
choices when optionally repartitioning your hard disk:
 
 - Use your current version of the MS-DOS BACKUP and RESTORE commands
   to back up your hard disk when preparing to partition.
 
   -or-
 
 - First install MS-DOS version 6.0 or 6.2 in order to use the
   Microsoft Backup program (MSBACKUP) when preparing to partition.
 
   While this option requires that you install MS-DOS twice (once
   before and once after you partition), using the Microsoft Backup
   program provides you with many more options when backing up your
   data.
 
To partition your hard disk by using MS-DOS version 6.0 or 6.2:
 
1.  Insert Setup Disk 1 (the first of your installation disks) in
    drive A.
 
2.  At the MS-DOS command prompt, type A:SETUP, press ENTER, and then
    follow the instructions in the first few screens. At the screen
    that begins with "The following programs can be installed on your
    computer," note the default setting for "Backup." This setting
    will be either Windows Only or MS-DOS Only.
 
3.  If you have Microsoft Windows installed on your personal computer,
    change the Backup setting to include MS-DOS. You can choose either
    the Backup: MS-DOS Only option or the Backup: Windows And MS-DOS
    option.
 
4.  Continue following the instructions to install MS-DOS.
 
5.  Before you restart your system, make sure drive A is empty.
 
6.  Insert Setup Disk 1 (the first of your installation disks) in
    drive A.
 
7.  To create a startup floppy disk called Startup, type A:SETUP /F at
    the MS-DOS command prompt and press ENTER. Follow the instructions
    on the screen.
 
8.  Run the Microsoft Backup program by typing MSBACKUP at the MS-DOS
    command prompt and pressing ENTER. Create full backups of all the
    partitions on your hard disk.
 
9.  At the MS-DOS command prompt, type FDISK and press ENTER. This
    initiates the procedure to partition your hard disk. Refer to
    "Using Fdisk to Configure Your Hard Disk" in Chapter 8 of the
    Microsoft MS-DOS 6 "User's Guide".
 
10. Insert the Startup disk (which you created in step 7) in drive A
    and format all of your partitions. When formatting your hard disk
    drive, use the /S switch (this transfers system files to your hard
    disk drive, making it the startup drive). For example, type the
    following at the MS-DOS command prompt and press ENTER
 
      format <drive>: /s
 
    where <drive> is your hard disk drive. For example, if your hard
    disk drive is drive C, type the following command:
 
      format c: /s
 
11. Install MS-DOS on your newly partitioned hard disk. Be sure to
    install the MS-DOS version of the Microsoft Backup program.
 
12. Run Microsoft Backup to restore your data by typing MSBACKUP at
    the MS-DOS command prompt and pressing ENTER. If you used the
    MS-DOS Backup program to back up your data, use the MS-DOS
    RESTORE command to restore it.
---------------------------------------------------------------------
 
TO OBTAIN THIS APPLICATION NOTE
===============================
 
 - On CompuServe, GEnie, and MSPN, Application Notes
   are located in the Microsoft Software Library. You can find
   PD0771 in the Software Library by searching on the word PD0771,
   the Q number of this article, or S14127. PD0771 is a compressed,
   self-extracting file. After you download PD0771, run it to
   extract the file(s) it contains.
 
 - On the Internet, Application Notes are located on the Microsoft
   anonymous ftp server, which you can reach by typing "ftp
   ftp.microsoft.com" (without the quotation marks) at the ">" command
   prompt. You can find PD0771.EXE in the SOFTLIB/MSLFILES directory.
 
 - Application Notes are available by modem from the Microsoft
   Download Service (MSDL), which you can reach by calling (206)
   936-6735. This service is available 24 hours a day, 7 days a week.
   The highest download speed available is 14,400 bits per second
   (bps). For more information about using the MSDL, call (800)
   936-4200 and follow the prompts. To obtain PD0771, download
   PD0771.EXE.
 
 - You can have this Application Note mailed or faxed to you from the
   automated Microsoft MS-DOS 6.2 FastTips Technical Library, which you
   can call 24 hours a day, 7 days a week at (800) 936-4200. NOTE: The
   FastTips Technical Library is available only to customers within the
   U.S. and Canada.
 
 - If you are unable to access the source(s) listed above, you can
   have this Application Note mailed or faxed to you by calling
   Microsoft Product Support Services Monday through Friday, 6:00 A.M.
   to 6:00 P.M. Pacific time at (206) 646-5104. If you are outside the
   United States, contact the Microsoft subsidiary for your area. To
   locate your subsidiary, call Microsoft International Sales Information
   Center at (206) 936-8661.
 
KBCategory: kbtool kbdisplay kbfile kbappnote
KBSubcategory: msdos
Additional reference words: appnote MWBackup 6.00 6.20
===========================================================================
==
Copyright Microsoft Corporation 1995.


 
