Subj : eCS sio2k
To   : Robin Hajek
From : Mike Luther
Date : Thu Dec 18 2003 11:24 pm

Robin ..



 RH> In OS/2 Warp 4, he used 3 "physical" serial ports COM1 (3F8/4), COM2
 RH> (3F8/3) and COM3 (3E8/7). The were configured classical by the HW BIOS
 RH> setup. Then, he used one virutal COM5 port for the Internet, Telnet
 RH> etc. This old and functional setup is here:

 RH> DEVICE=C:\UTIL-OS2\SIO\SIO.SYS
 RH> (COM1:57600,3F8,IRQ4,-)(COM2:57600,2F8,IRQ3,-) (COM3:57600,3E8,IRQ5,-)
 RH> (COM5,INTERNET:4228,NONE:7,-)

 RH> DEVICE=C:\UTIL-OS2\SIO\VSIO.SYS
 RH> (COM1:57600,3F8,IRQ4,-)(COM2:57600,2F8,IRQ3,-) (COM3:57600,3E8,IRQ5,-)

 RH> DEVICE=C:\UTIL-OS2\SIO\VX00.SYS

 RH> Please could you help us and tell us how to set the new version of
 RH> SIO2K to this functionality? We have some similar questions from the
 RH> next friends and we cannot find anything about this and virtual ports
 RH> in documentation...

Just as a suggestion, here is a four port plus internet setup for it that is 
working here.  Obviously, the long line below is split into two and that 
underscore mark isn't in there.  There is a space in the line right after the 
word sio2k.log:

> device=C:\sio2k\uart.sys logfile=C:\sio2k\sio2k.log
> device=C:\sio2k\vsio2k.sys logfile=C:\sio2k\vsio2k.log _
>       vIrqList(2=3,1=4,3=15,4=11)
> device=C:\sio2k\vx00.sys
> device=C:\sio2k\vmodem.sys logfile=C:\sio2k\sio2k.log NoPause nPorts=1

You should be able to get the idea about the IRQ values in use here from the 
above list by looking at it in any language, grin!


--> Sleep well; OS/2's still awake! ;)

Mike @ 1:117/3001




--- Maximus/2 3.01
 * Origin: Ziplog Public Port (1:117/3001)

.