Subj : Re: Upgrade
To   : Jay Emrie
From : Alan Zisman
Date : Wed Jul 25 2001 12:31 am

-=> JAY EMRIE wrote to BENNIE HUTTO <=-

 BH>BH>> Hello everybody!
 BH>BH>>  I know this might sound like a stupid question, BUT...
 BH>BH>> I upgraded one of my machines to Win2kpro, I know the
 BH>BH>> autoexec.bat from Win98 was renamed autoexec.nt, but where the
 BH>BH>> heck did the config.sys go?? I can find no config.nt on the
 BH>BH>> machine anywhere.

 BH>BH>> The reason is, I have a SCSI 7 CD-changer that is not found by
 BH>BH>> any windows OS and the drivers need to be loaded in the
 BH>BH>> config.sys. Any suggestions? Thanks!

 BH>AZ> If you need DOS-level drivers, you're out of luck-- they aren't
 BH>AZ> supported in W2K (or Win ME for that matter).

 BH>So in essence, you're telling me I wasted my money.
 BH>Lu'vly... just freakin lu'vly.

 JE> Not necessarily, Bennie. What is the make and model of the
 JE> SCSI 7 CD-Changer? Go to that companies web site and it is
 JE> quite possible they will have a Windows SCSI driver for the
 JE> changer. Most of the peripheral makers are making windows
 JE> 2000 drivers for their devices.

 Is the issue drivers for the CD-Changer, or drivers for the SCSI adapter? I
used to use an HP Scanjet 2C, which only worked under Win95 with DOS-level
drivers... but that was because there were no Windows drivers for the HP SCSI
adapter that shipped with the scanner.

 If I had used a more general-purpose SCSI adapter, I would have had no
problems-- and probably better performance.
.... Homepage: http://www.zisman.ca
___ MultiMail/Win32 v0.40

--- Maximus/2 3.01
 * Origin: COMM Port OS/2 juge.com 204.89.247.1 (281) 980-9671 (1:106/2000)

.