Subj : Re: IO Port
To   : borland.public.cpp.borlandcpp
From : dkat
Date : Tue Nov 09 2004 09:13 pm

Do a search for TVichw32 - it is a real nice package that will allow you to
build what you need.

http://www.clana3d.com/sections.php?op=printpage&artid=55

This is a link I came up with on a quick search but I can't tell you what
they are handing out.

"Dani" <mail_1234@yahoo.com> wrote in message
news:419157a2$1@newsgroups.borland.com...
>
>  It is Windows 32 bit, any other suggestions?
>
> Bob Gonder <notbg@notmindspring.invalid> wrote:
> >Dani wrote:
> >
> >>This is new for me :(
> >>I need to open a drawer which uses RJ11 Connector. The specifications
are:
> >>
> >>The driving voltage is DC+12V. I/O port 408h is used for the solenoid
operation. To open the drawer, write E0h to the port, wait 200ms, then write
F0h to turn off the drive.
> >>
> >>Can anyone provide me with an example for this.
> >
> >#include <dos.h>
> >
> >outportb( 0x408, 0xe0 );
> >delay(200)
> >outportb( 0x408, 0xf0 );
> >
> >Unless you are writting for 32 bit Windows, but then you'd be in the
> >wrong group :-)
> >
> >
> >
>

.