Subj : Re: IO Port
To   : borland.public.cpp.borlandcpp
From : Dani
Date : Tue Nov 09 2004 03:49 pm


 It is Windows 32 bit, any other suggestions?

Bob Gonder <notbg@notmindspring.invalid> wrote:
>Dani wrote:
>
>>This is new for me :(
>>I need to open a drawer which uses RJ11 Connector. The specifications are:
>>
>>The driving voltage is DC+12V. I/O port 408h is used for the solenoid operation. To open the drawer, write E0h to the port, wait 200ms, then write F0h to turn off the drive.
>>
>>Can anyone provide me with an example for this.
>
>#include	<dos.h>
>
>outportb( 0x408, 0xe0 );
>delay(200)
>outportb( 0x408, 0xf0 );
>
>Unless you are writting for 32 bit Windows, but then you'd be in the
>wrong group :-)
>
>
>

.