Subj : IO Port
To   : borland.public.cpp.borlandcpp
From : Dani
Date : Tue Nov 09 2004 02:55 pm


 Hi all,

This is new for me :(
I need to open a drawer which uses RJ11 Connector. The specifications are:

The driving voltage is DC+12V. I/O port 408h is used for the solenoid operation. To open the drawer, write E0h to the port, wait 200ms, then write F0h to turn off the drive.

Can anyone provide me with an example for this.
Thanks in advance,

.