Subj : H-P DeskJet 639C
To   : THURSTON ACKERMAN
From : Matt Mc_Carthy
Date : Mon Aug 08 2005 01:18 am

07 Aug 2005, 07:43, THURSTON ACKERMAN (1:123/140), wrote to MATT MC_CARTHY:

Hi THURSTON.

 MM>>Do the paper feed rollers still turn?

 TA> No.

Then there is not much hope other than to check the seating and connections of 
the cables from the drive motor to the board.  

The linefeed signals are either not getting from the processor to the driver 
chips, or from the driver chips to the motor.  If you can 'unplug' or 'release' 
the cables and re-seat them with no benefit, it is probably going to be too 
difficult to trouble shoot, and I would have to agree with the 'boat anchor' 
scenario!   :-((


     Good luck...  M. 

--- Msged/386 TE 06 (pre)
 * Origin: Matt's Hot Solder Point, New Orleans, LA (1:396/45.17)

.