Subj : Help! To : Peter Hampf From : Steve Quarrella Date : Thu Oct 12 2000 07:01 am sq>> $ 18:55:35 | MSG from Joe Tester [1:393/9005.3] to Robert Fnord [1:124/9005] sq>> $ 18:55:35 | Message from or to robot/excluded writer (TXT2PKT v1.42) sq>> + 18:55:35 | Message 20.MSG removed! PH> Are you sure that 1:124/9005 DOES exist in your nodelist? I'm positive that it does NOT exist, as it's my old address, and I was using it to see OT/Bounce mail addressed to a system that isn't in the nodelist. :-) If I sent a message from my point system at 9005.3 to 1:124/9005, things behave as I'd expect, as the message is bounced back to 9005.3. However: PH> It seems that O/T wanted to bounce the message back but does PH> not do it because it found the message to be originated from PH> a robot - and you have told it to remove those messages. I found the switch where Bounce Robot was set to "No" and changed it to "Yes," but I just created another test packet to 1:124/9005 and here's what happened: ---------- Thu 12 Oct 00, O/T-Track [FreeWare] 2.80; Task=000 D 13:40:25 Offset to get UTC: 6 = 13:40:26 Processing path F:\FD\MAIL\ = 13:40:26 reading 22.MSG D 13:40:26 | ID: "MSGID: 1:393/9005.3 294ca849" $ 13:40:26 | MSG from Joe Tester [1:393/9005.3] to Robert Fnord [1:124/9005] D 13:40:26 | Text: 121 B $ 13:40:26 | Message from or to robot/excluded writer (TXT2PKT v1.42) + 13:40:26 | BOUNCE (EXCL) $ 13:40:26 | moved from F:\FD\MAIL\ to: F:\FD\KILL\1.MSG + 13:40:26 >> .MSG excluded from handling! Only *MOVED/DELETED*! D 13:40:26 Msgs: 22 found 1 read 0 (re)written D 13:40:26 AŽŽŽ: 0 changed 0 created 1 moved/copied D 13:40:26 Time over all:...........1 sec D 13:40:26 Time for netmail:........0 sec | 13:40:26 All done D 13:40:26 exiting with code 120 So where is it that I need to go to tell it to bounce this message back to 9005.3 instead of just moving it? It doesn't matter to me that it's a robot, just bounce it. :-) Thanks! --- * Origin: Wombat Spankers * Argyle, TX (1:393/9005.3) .