Subj : USB 2.0, Warp 4, ECS and
To   : Will Honea
From : Peter Knapper
Date : Mon Jun 13 2005 11:52 pm

Hi Will,

PK>  WH> BASEDEV=USBUHCD.SYS /V
PK>  WH> BASEDEV=USBD.SYS /V
PK>  WH> BASEDEV=USBHID.SYS /v
PK>  WH> BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:1 /V
PK>  WH> BASEDEV=USBCDROM.ADD /V
PK>  WH> DEVICE=E:\OS2\BOOT\USBPRT.SYS /V
PK>  WH> DEVICE=E:\OS2\BOOT\USBMOUSE.SYS /V
PK>  WH> device=E:\os2\boot\usbresmg.sys /V
PK> 
PK> Some people seem to suggest that you load the first of 
PK> those (USBUHCD.SYS) twice, once for each USB controller on 
PK> a System. Is that what you have found?

 WH> That's a function of your hardware.  PCI will indicate how many ports
 WH> you have - you need one line for each port.  

Good, that confirms my thinking as well.


 WH> In fact, the mb has a VIA chipset with a builtin
 WH> port that uses USBOHCD.SYS but that one is too flakey to use.

Hmmm, how did you deterine that the chipset was the problem?

Cheers............pk.


--- Maximus/2 3.01
 * Origin: Another Good Point About OS/2 (3:772/1.10)

.