Subj : USB 2.0, Warp 4, ECS and
To   : Rich Wonneberger
From : Will Honea
Date : Fri Jun 10 2005 01:20 am

Rich Wonneberger wrote to I-Net   Turtil@Frontierne on 06/09
RW> *** Quoting Will Honea to Peter Knapper dated 06-08-05 ***
RW> > PK>   USBUHCI.SYS v1.1 Host Controller driver is loaded.
RW> > PK>   USBHID.SYS v1.1 Class driver is loaded.
RW> 
RW> Will,
RW> 
RW> Should the first USB driver be USBUHCD.SYS??  I dont have the
RW> above. When I insert a USB thumb drive its not found.  Is there 
RW> something I need to  do when I insert something?? PCI -I does
RW> display several devices.

Something is missing.  I have:

BASEDEV=USBUHCD.SYS /V
BASEDEV=USBD.SYS /V
BASEDEV=USBHID.SYS /v
BASEDEV=USBMSD.ADD /FLOPPIES:0 /REMOVABLES:1 /V
BASEDEV=USBCDROM.ADD /V
DEVICE=E:\OS2\BOOT\USBPRT.SYS /V
DEVICE=E:\OS2\BOOT\USBMOUSE.SYS /V
device=E:\os2\boot\usbresmg.sys /V

The USBMSD.ADD is what picks up the drives and I run USBRES.EXE to
keep track of insertion/removal of the devices (both storage and
CDROM).  USBMSD is also the one that has had the most significant
updates over the last couple of years.  Note that the .ADD files load
before the .sys files and are typically quiet.

Will Honea <hwj25@qwest.net>

___
 þ KWQ/2 1.2i þ An expert is one who avoids the small errors in favour of the 
rea

--- Maximus/2 3.01
 * Origin: COMM Port OS/2 juge.com 204.89.247.1 (281) 980-9671 (1:106/2000)

.