(TXT) View Source
# PURETEK INDUSTRIAL CO, INC.
14400BPS FAX/MODEM ADAPTER (EXT)
Card Type Fax, Modem (asynchronous)
Chip Set Unidentified
Maximum Data Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus External
Fax Class Class I & II
Data Modulation Bell 103/212A
Protocol
ITU-T V.21, V.22, V.22bis, V.23, V.25,
V.32, V.32bis
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Protocol
Error MNP5, V.42, V.42bis
Correction/Compression
(IMG) IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| DC power | CN1 | Line out | CN3 |
|-----------------------------+------------+----------+------|
| RS-232/422 | CN2 | Line in | CN4 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-----------------------------------------+-------+----------|
| í DTR normal | SW1/1 | Off |
|-----------------------------------------+-------+----------|
| Modem ignores DTR | SW1/1 | On |
|-----------------------------------------+-------+----------|
| í Verbose result codes | SW1/2 | Off |
|-----------------------------------------+-------+----------|
| Numeric result codes | SW1/2 | On |
|-----------------------------------------+-------+----------|
| í Result code display enabled | SW1/3 | On |
|-----------------------------------------+-------+----------|
| Result code display disabled | SW1/3 | Off |
|-----------------------------------------+-------+----------|
| í Local echo enabled | SW1/4 | Off |
|-----------------------------------------+-------+----------|
| Local echo disabled | SW1/4 | On |
|-----------------------------------------+-------+----------|
| í Auto answer disabled | SW1/5 | On |
|-----------------------------------------+-------+----------|
| Auto answer enabled | SW1/5 | Off |
|-----------------------------------------+-------+----------|
| í CD signal normal | SW1/6 | Off |
|-----------------------------------------+-------+----------|
| CD forced high | SW1/6 | On |
|-----------------------------------------+-------+----------|
| í Load Y or Y1 configuration from NVRAM | SW1/7 | Off |
|-----------------------------------------+-------+----------|
| Load &F0 generic template configuration | SW1/7 | On |
| from ROM | | |
|-----------------------------------------+-------+----------|
| í Smart mode | SW1/8 | On |
|-----------------------------------------+-------+----------|
| Dumb mode | SW1/8 | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|---------+-------+----------+-------------------------------|
| AA | Red | On | Auto-answer enabled |
|---------+-------+----------+-------------------------------|
| AA | Red | Off | Auto-answer disabled |
|---------+-------+----------+-------------------------------|
| AA | Red | Blinking | Phone is ringing |
|---------+-------+----------+-------------------------------|
| CD | Red | On | Carrier signal detected |
|---------+-------+----------+-------------------------------|
| CD | Red | Off | Carrier signal not detected |
|---------+-------+----------+-------------------------------|
| RD | Red | On | Modem is receiving data |
|---------+-------+----------+-------------------------------|
| RD | Red | Off | Modem is not receiving data |
|---------+-------+----------+-------------------------------|
| SD | Red | On | Modem is transmitting data |
|---------+-------+----------+-------------------------------|
| SD | Red | Off | Modem is not transmitting |
| | | | data |
|---------+-------+----------+-------------------------------|
| TR | Red | On | DTR signal is high |
|---------+-------+----------+-------------------------------|
| TR | Red | Off | DTR signal is low |
|---------+-------+----------+-------------------------------|
| CS | Red | On | CTS forced high and transmit |
| | | | hardware flow control enabled |
|---------+-------+----------+-------------------------------|
| CS | Red | Off | CTS forced low and transmit |
| | | | hardware flow control |
| | | | disabled |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | On | Data mode; error correction |
| | | | enabled |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | Off | Data and Fax mode; error |
| | | | correction and fax disabled |
|---------+-------+----------+-------------------------------|
| ARQ/FAX | Red | Blinking | Data mode; retransmitting |
| | | | data to remote |
| | | | |
| | | | Fax mode; fax mode enabled |
+------------------------------------------------------------+
+---------------------------------------------------------+
| SUPPORTED COMMAND SET |
|---------------------------------------------------------|
| Basic AT Commands |
|---------------------------------------------------------|
| AT, ‘+++’, A/ |
|---------------------------------------------------------|
| A, B, E, G, H, L, M, T, V |
|---------------------------------------------------------|
| S Registers |
|---------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12 |
|---------------------------------------------------------|
| Note: See MHI Help file for full command documentation. |
+---------------------------------------------------------+
Proprietary AT Command Set
For a full command summary, see PURETEK INDUSTRIAL CO, INC.14400BPS
FAX/MODEM ADAPTER (INT)